AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
2 x (1427 - 2690) (By5/Ty6)
Frequency range (MHz)
690 - 803
790 - 862
Polarization
Electrical downtilt (°)
at mid Tilt
824 - 894
880 - 960
1427 - 1518
1695 - 1990
1920 - 2200
over all Tilts
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
2490 - 2690
+45° , -45°
+45° , -45°
2 - 12, continuously adjustable , each band
separately
2 - 12 , continuously adjustable , each band separately
14.7
15.0
15.1
15.2
14.9
16.2
16.7
16.9
16.7
14.5 ±0.5
14.8 ±0.4
14.9 ±0.4
15.0 ±0.5
14.7 ±0.5
16.1 ±0.7
16.5 ±0.5
16.7 ±0.6
16.5 ±0.8
> 16
> 16
> 16
> 16
> 17
> 17
> 17
> 17
> 17
Gain (dBi)
Side lobe suppression for first side lobe
above main beam (dB)
2200 - 2490
72 ±7
71 ±7
70 ±7
69 ±6
71 ±5
62 ±4
61 ±3
60 ±5
59 ±5
11.0 ±0.9
10.0 ±0.7
9.7 ±0.6
9.1 ±0.5
11.3 ±0.8
9.2 ±0.7
8.3 ±0.6
7.3 ±0.5
6.9 ±0.5
VSWR
< 1.5
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 25
≥ 25
≥ 25
Interband isolation (dB)
≥ 25
≥ 28
≥ 28
Front to back ratio total, ±30° (dB)
> 21
> 22
> 22
> 22
> 21
> 22
> 22
> 22
> 22
Cross polar ratio at boresight (dB)
> 18
> 18
> 18
> 18
> 18
> 18
> 18
> 16
> 18
Max. effective power per port (W)
400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690) (By1/By3/Ty2/Ty4)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable , each band separately
at mid Tilt
17.3
18.0
18.5
18.2
17.1 ±0.8
17.8 ±0.8
18.3 ±0.8
18.0 ±0.8
> 16
> 16
> 16
> 15
36 ±4
32 ±3
31 ±2
30 ±2
9.9 ±0.8
9.1 ±0.7
7.8 ±0.5
7.2 ±0.5
±27
±24
> 26
> 28
> 28
> 15
> 16
> 15
Gain (dBi)
over all Tilts
Side lobe suppression for first side lobe
above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
VSWR
Horizontal beam centers (°)
< 1.5
±30
±28
Cross polar isolation (dB)
≥ 25
Beam to Beam isolation (dB)
≥ 18
Interband isolation (dB)
≥ 28
Front to back ratio total, ±30° (dB)
> 25
Cross polar ratio at boresight (dB)
> 15
Max. effective power per port (W)
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 900 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1
AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with 8 Integrated RCUs - 2.0m
68
Mechanical Properties
2009 x 499 x 206
Packing dimensions (H x W x D) (mm)
2360 x 550 x 245
Antenna weight (kg)
46.8
Clamps weight (kg)
6.3 (2 units)
Antenna packing weight (kg)
(530)
Antenna dimensions (H x W x D) (mm)
62 (Included clamps)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1420
2009
Mast diameter supported (mm)
Frontal:
730 (at 150 km/h)
Lateral:
380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
16 x 4.3-10 Female
Connector position
59
Connector
Bottom
Unit: mm
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 12°
3.1 kg
1 (Separate packing)
Integrated RET S/N:
HWxxxx……….y2
HWxxxx……....y1
HWxxxx……....r1
y6
y2
y4
y5
y1
y3
HWxxxx……….y6
h
HWxxxx……….r2
g
HWxxxx……….y3
g HWxxxx……....y4
r1
r2
h HWxxxx……….y5
r - Red
L - Left array
2
y - Yellow
R - Right array
B - Bottom array
T - Top array
AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with 8 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol
switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427- 2690 MHz
(By5/Ty6)
3
AMB4519R18v06
2MXXXXXX-690-960/690-960/1427-2690/1427-2690/1695-2690/1695-269065/65/65/65/33/33-15.5i/15.5i/17.5i/17.5i/18.5i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Octa-beam Antenna with 8 Integrated RCUs - 2.0m
1695 - 2690 MHz
(Ty4)
1695 - 2690 MHz
(Ty2)
1695 - 2690 MHz
(By3)
1695 - 2690 MHz
(By1)
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.
Huawei Technologies Co., Ltd.
Bantian, Longgang District, Shenzhen 518129, P.R.China
4
www.huawei.com/antenna
Issue: 2020-11-27