Machine Design
Project Layout
MAPÚA UNIVERSITY
PUT PROJECT TITLE HERE
In Partial Fulfillment of the
Requirements of ME151P-2_**Put Section** **Put Term and AY**
School of Mechanical and Manufacturing Engineering
Submitted by:
Surname, First Name
Student Number
Surname, First Name
Student Number
Surname, First Name
Student Number
Surname, First Name
Student Number
Surname, First Name
Student Number
Dr. Jaime P. Honra
Professor
**Month and Year** of submissio
Add a functional table of contents in this page.
Table of Contents
Abstract ........................................................................................................................................... v
INTRODUCTION......................................................................................................................... 6
A. Objectives ......................................................................................................................... 6
B. Purpose of the Design ...................................................................................................... 6
C. Significance of the Design ............................................................................................... 6
D. Scope and Limitations ...................................................................................................... 6
INFORMATION GATHERING ................................................................................................. 7
A. Review of Related Literature ........................................................................................... 7
B. Review of Related Designs .............................................................................................. 7
C. Fieldwork (Author/Source, Year) .................................................................................... 7
DESIGN CONSIDERATIONS .................................................................................................... 8
A. Design Codes and Standards ............................................................................................ 8
B. Cost-Benefit Analysis ...................................................................................................... 8
C. Ethical and Safety Considerations ................................................................................... 8
EQUATIONS AND COMPUTATIONS ..................................................................................... 9
A. **Machine Design Component 1** Calculation ............................................................. 9
B. **Machine Design Component 2** Calculation ............................................................. 9
C. **Machine Design Component 3** Calculation ............................................................. 9
D. **Machine Design Component 4** Calculation ............................................................. 9
VISUAL REPRESENTATIONS ............................................................................................... 10
A. Orthographic Views ....................................................................................................... 10
B. Isometric View ............................................................................................................... 10
C. Exploded View ............................................................................................................... 10
CONCLUSION AND RECOMMENDATIONS ...................................................................... 11
Conclusion .................................................................................................................................... 11
Recommendations ......................................................................................................................... 11
REFERENCES ............................................................................................................................ 12
APPENDIX .................................................................................................................................. 13
APPENDIX A: **Assigned Title ** ..................................................................................... 13
iii
Add a functional List of Tables in this page if you used tables.
Add a functional List of Figures in the next page.
Add a functional List of Appendices after the list of figures.
iv
Abstract
Write a brief summary of the paper here. Keep it within 150 to 250 words only.
v
Project Title here
Machine Design Project
INTRODUCTION
Write content here that provides background information of the machine itself.
A. Objectives
•
•
•
Clearly state the objective of the project.
Clearly state the objective of the machine design.
…
B. Purpose of the Design
Write here about the specific issue or challenge that the machine design aims to address.
The specific issue may be with the existing machine, in which you will propose a modified design
and validate it with calculations and visual representation or simulations. If you do not aim to
propose a new design, you may write here the specific issue or challenge that leads to the invention
of that machine and validate it with calculations and visual representation or simulations.
C. Significance of the Design
Write content here that highlights the importance of the problem and its relevance. What
does this project contribute? What are the practical implications? What is its impact? etc.
D. Scope and Limitations
Define here the parameters and constraints of the project. The scope of a study outlines the
extent and boundaries of the research. It defines what the study will cover and what it will not
cover. Limitations acknowledge potential weaknesses or constraints in the research design or
execution. They highlight factors that may affect the study's validity, generalizability, or reliability.
6
Project Title here
Machine Design Project
INFORMATION GATHERING
A. Review of Related Literature
Write a review of related literature if you gathered useful information for the project or
paper, more especially, design considerations and assumptions. Do not forget to cite the literature
properly using numbers as such [1]. You may also identify gaps in their existing designs or areas
wherein your project/design may make improvements. Leave nothing in this paragraph.
1. Related Literature Title (Author/Source, Year)
Write the review or synthesis here.
…
B. Review of Related Designs
Write a review of related designs if you gathered useful information for the project or paper,
more especially, design considerations and assumptions. Do not forget to cite the literature
properly using numbers as such [1]. You may also identify gaps in their existing designs or areas
wherein your project/design may make improvements. Leave nothing in this paragraph.
1. Related Design Title (Author/Source, Year)
Write the review or synthesis here.
…
C. Fieldwork (Author/Source, Year)
Write a field work section if you gathered data from actual operation of machineries.
Gathered data from companies or personnel. Observed actual machineries for design
considerations and assumptions. You may attach proof of the gathered data in the appendix. You
may also identify gaps in their existing designs or areas wherein your project/design may make
improvements. Leave nothing in this paragraph.
1. Assign a Title here
Write the review or synthesis here.
…
7
Project Title here
Machine Design Project
DESIGN CONSIDERATIONS
A. Design Codes and Standards
Write and cite the latest revisions of design codes and standards in engineering serve as
established guidelines and specifications that you followed when designing structures, products,
or systems for this project. These codes and standards are developed by professional organizations,
government agencies, and industry bodies to ensure that engineering designs meet certain criteria
for safety, reliability, and performance. Specify on how and where it is applied in your design.
B. Cost-Benefit Analysis
Evaluate the cost and benefits of different design choices. Engineers assess the impact of
potential changes on both the cost of production and the performance of the product to ensure that
any cost-cutting measures do not compromise safety or functionality.
You may also identify here the cost-effective materials and manufacturing processes you
selected for considering the cost of production without sacrificing quality or safety. This may
involve exploring alternative materials or production methods that can achieve the desired results
at a lower cost.
C. Ethical and Safety Considerations
Provide a comprehensive and clear overview of the principles and practices that will guide
the development and implementation in this project. This section may entail environmental and
social responsibility, proactive safety measures, emergency preparedness, etc.
8
Project Title here
Machine Design Project
EQUATIONS AND COMPUTATIONS
Write a brief description and overview of the approach involving computations made in
this project here.
A. **Machine Design Component 1** Calculation
Insert equations here. Add description/explanation if needed.
B. **Machine Design Component 2** Calculation
Insert equations here. Add description/explanation if needed.
C. **Machine Design Component 3** Calculation
Insert equations here. Add description/explanation if needed.
D. **Machine Design Component 4** Calculation
Insert equations here. Add description/explanation if needed.
***
Feel free to add as many Headings as you need according to how many machines design
component you calculated.
Nomenclature
List down the variable and their labels or names in the order that they appeared in the
calculations.
9
Project Title here
Machine Design Project
VISUAL REPRESENTATIONS
Write a brief description and overview of the approach in generating or rendering and
presenting the visual representations of the design.
A. Orthographic Views
Insert figures of the machine in Front view, Top view, Side view, Rear view with labels
and descriptions.
B. Isometric View
Insert figures of the machine in isometric view with labels and description
C. Exploded View
Insert a rendered exploded view of the machines wherein the individual components of a
mechanical assembly or product spatially separated from each other with labels and description.
***
You may continue to add subtopics if you wish to provide more rendered visuals of the
machine or individual parts of the machine. You may also continue to add subtopics if you
simulated the design for static or dynamic analysis. You may also insert tables if you wish to
organize the specifications, size and dimensions, labels, and more of your figure. Have this format
for the figures and tables:
Figure 1. Mapua University
Table 1. Machine Design
Component
Quantity
Material
Frame
1
Steel
Motor
2
Aluminum
Dimension
(mm)
1000 x 800
x 200
10
Weight
(kg)
15
Supplier
Cost
ABC Inc.
15,000
2
XYZ Ltd.
7,500
Project Title here
Machine Design Project
CONCLUSION AND RECOMMENDATIONS
Conclusion
Write here a summarized key findings and results obtained during the project, evaluation
of the set objectives, main achievement or accomplishment in conducting the project, etc.
Recommendations
Write here recommendations for future implications, improvements of to the design,
optimization, further testing, etc.
11
Project Title here
Machine Design Project
REFERENCES
Use APA format for citations.
12
Project Title here
Machine Design Project
APPENDIX
APPENDIX A: **Assigned Title **
The last attached appendix should be the poster
13