DXX-1710-2690/1710-2690-65/65-16i/16i-M/M
Model: ADU451507v06
Electrical Properties
2 x (1710 - 2690) (yL/yyR)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable, each band separately
at mid Tilt
Gain (dBi)
over all Tilts
Side lobe suppression for first side
lobe above main beam (dB)
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
15.2
15.9
16.0
16.5
15.2 ±0.5
15.8 ±0.5
16.0 ±0.5
16.3 ±0.5
> 18
> 18
> 18
> 17
66 ±5.2
64 ±4.8
62 ±4.1
60 ±4.4
12.0 ±0.9
10.8 ±0.9
10.0 ±0.9
8.6 ±0.6
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
Interband isolation (dB)
≥ 28 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio, ±30° (dB)
> 24
> 24
> 24
> 24
Cross polar ratio (dB)
> 18
> 18
> 18
> 18
0°
Max. effective power per port (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
840 x 299 x 109
Packing dimensions (H x W x D) (mm)
1200 x 350 x 195
Antenna weight (kg)
9.6
Clamps weight (kg)
2.1 (2 units)
Antenna packing weight (kg)
68
16 (Included clamps)
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal:
230 (at 150 km/h)
Lateral:
75 (at 150 km/h)
Maximum: 265 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
Connector
4 x 4.3-10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt: 0° - 20°
0.6 kg
1 (Separate packing)
1
840
38 - 115
748
Mast diameter supported (mm)
DXX-1710-2690/1710-2690-65/65-16i/16i-M/M
Model: ADU451507v06
58
55
yL
83
yyR
Unit: mm
58
Pattern sample for reference
1710 - 2200 MHz
(yL)
2200 - 2690 MHz
(yyR)
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.
Huawei Technologies Co., Ltd.
Bantian, Longgang District, Shenzhen 518129, P.R.China
2
www.huawei.com/antenna
Issue: 2020-11-27