Mounting Description RRU support
Package content
The tightening torques recommended in this mounting description presupposes bolts,
threaded rods and nuts in delivery state. Nuts are to be lubricated before assembly. Check
that the supporting structure can safely carry the loads applied to it by the MAFI product.
Page 1(6)
221 06 SXK 107 2869/1 Uen rev D
© Ericsson AB 2015
Mounting Description RRU support
Mounting procedure
Pole mount, PSU optional
1
2
3
4
41Nm
5
18Nm
Space for PSU
Page 2(6)
221 06 SXK 107 2869/1 Uen rev D
© Ericsson AB 2015
Mounting Description RRU support
Pole mount with A2 unit
2
1
M10 x 65
41Nm
3
M10 x 55
4
41Nm
41Nm
M10 x 25
5
18Nm
Page 3(6)
221 06 SXK 107 2869/1 Uen rev D
© Ericsson AB 2015
Mounting Description RRU support
Pole mount with single A2 unit
1
M10 x 55
2
3
4
41Nm
41Nm
M10 x 25
5
18Nm
Page 4(6)
221 06 SXK 107 2869/1 Uen rev D
© Ericsson AB 2015
Mounting Description RRU support
Wall mount
2
1
CC183mm
CC130mm
3
4
>5m
1
5
6
41Nm
1
Follow local building regulations and instructions and ensure use of approved
fasteners. MAFI AB, the product manufacturer, does not warrant other than the product
during mounting onto wall, roof or other similar assemblies.
Page 5(6)
221 06 SXK 107 2869/1 Uen rev D
© Ericsson AB 2015
Mounting Description RRU support
Wall mount with A2 unit
2
1
CC221mm
CC130mm
3
4
1
41Nm
M10 x 55
M10 x 65
5
6
41Nm
M10 x 25
1
Follow local building regulations and instructions and ensure use of approved
fasteners. MAFI AB, the product manufacturer, does not warrant other than the product
during mounting onto wall, roof or other similar assemblies.
Page 6(6)
221 06 SXK 107 2869/1 Uen rev D
© Ericsson AB 2015