PRODUCT LIST PUT AT YOUR DISPOSAL SEVERAL OF OUR PRODUCTS. BECAUSE WE ONLY WORK WITH OUR OWN PRODUCTS WE CAN OFFER VERY COMPETITIVE PRICES HERE ARE THE PRODUCTS REFERRED TO. • • • • GMO SOYBEAN NON GMO SOYBEAN ICUMSA 45 SUGAR UREA 46 PETROLEUM AND PETROLEUM PRODUCTS: AMONG THE MAIN FUELS WE MARKET. • • • • • • • DIESEL D 6 EN 590 AVIATION KEROSENE (JP 54 Y JET A-1,3) BLEND CRUDE LIQUEFIED PETROLEUM GAS LNG FUEL OIL CST-180 CORPORATE PRODUCTS SOYBEAN - GMO (crop that has been genetically modified) - NO GMO (crop that has not been genetically modified) CORPORATE PRODUCTS ICUMSA 45 Sugar (International Commission for Uniform Methods of Sugar Analysis) UREA GRANULAR AND PRILLED : Monthly Quantity: 50,000 MT100,000MT Granular Urea is the fertiliser with the highest concentration of N. It is applied to all crops. CORPORATE PRODUCTS HYDROCARBONS We holds the status of OFFICIAL HYDROCARBON OPERATOR IN THE EUROPEAN UNION ULTRA LOW SULFUR DIESEL Minimum Quantity: 50,000 Metric Tons Maximum Quantity: 500,000 Metric Tons per Month A diesel fuel with a significantly reduced Sulphur content DIESEL GAS D2 OIL Minimum Quantity: 50,000 Metric Tons Maximum Quantity: 500,000 Metric Tons per Month D2/Gasoil, This diesel is characterized by a Sulphur content of 0.02 MAX, in accordance with the standard The standard "ultra low Sulphur", as it retains the 0,2 % (2000 ppm). DIESEL GAS OIL EN 590 (10PPM) Minimum Quantity: 50,000 Metric Tons Maximum Quantity: 500,000 Metric Tons x 12 Months EN 590 is a standard published by the European Committee for Standardization that describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union and several other European countries.. Based on 98/70 / EG, it allows the blending of up to 7% fatty acid methyl ester biodiesel with "conventional" diesel, a 7:93 blend.. AVIATION KEROSENE COLONIAL GRADE 54 JET FUEL Minimum Quantity: 500,000 Barrels Maximum Quantity: 5,000,000 Barrels per month x 12 Months JP54 fuels gas turbine aircraft engines. Jet A and A-1 have specifications that can be used in worldwide fuel. Jet B is used in cold weather elements. Commonly, several different blends make up jet fuel and this relates to flash points and how the carbon numbers are distributed.. DIESEL (D6) Minimum Quantity: 100,000,000 Gallons – Maximum Quantity: 800,000,000 Gallons x 12 Months A diesel fuel used especially in maritime transport PREMIUM MOTOR SPIRIT (PMS) Minimum Quantity: 50,000 Metric Tons Maximum Quantity: 500,000 Metric Tons x 12 Months Premium Motor Spirit (PMS) is one of the products of fractional distillation of petroleum. This product is in high demand in the developing countries as a result of their inability to refine enough quantities of the product to meet the consumers’ need JET A & JET A1 D1655 Minimum Quantity: 500,000 Barrels Maximum Quantity: 5,000,000 Barrels per month x 12 Months Aviation turbine fuel (ATF), aviation fuel, jet fuel, jet fuel or avtur is a type of aviation fuel designed for use in aircraft powered by gas turbine engines, as opposed to avgas, which is used in piston engine aircraft. It is colorless to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1,3 which are produced to a standardized international specification. BLEND CRUDE Minimum Quantity: 500,000 Barrels Maximum Quantity: 5,000,000 Barrels per month x 12 Months A combination of crude oils that is blended in the pipeline to create a crude oil with specific physical properties. LIQUIDIFIED PETROLEUM GAS. Minimum Quantity: 50,000 Metric Tons Maximum Quantity: 500,000 Metric Tons per Month LPG is usually used as a fuel in cars, but it is also used as an energy source for space, water and food heating in homes.. MINERAL FUELS Monthly Quantity: 500,000BBLS-10,000,000BBL Mineral fuels (coal, petroleum oils, natural and processed gas and their products) FUEL OIL CST-180 Minimum Quantity: 50,000 Metric Ton Maximum Quantity: 500,000 Metric Tons per Month Fuel Oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, Oil is any liquid petroleum product, which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F). Oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha. Fuel oils are used as fuel for power generation, marine bunkers and large industrial heating plants. LIQUIDIFIED NATURAL GAS (LNG) Minimum Quantity: 50,000 Metric Tons Maximum Quantity: 500,000 Metric Tons per Month Liquefied natural gas (LNG) is natural gas that has been cooled down to liquid form for ease and safety of non-pressurized storage or transport. BLEND CRUDE OIL Monthly Quantity:500,000BBL-10,000,000BBL Petroleum is a natural oil formed by a heterogeneous mixture of hydrocarbons (carbon and hydrogen compounds) from fossil organic remains, accumulated over millions of years under the oceans or continents and subjected to chemical, pressure and temperature processes. LIGHT CYCLE OIL (LCO) Minimum Quantity: 50,000 Metric Tons Maximum Quantity: 500,000 Metric Tons per Month Light cyclic oil is a product of catalytic disintegration that was usually used as a component of the hydrotreating feedstock for diesel production. AUTOMOTIVE GAS OIL (AGO) Minimum Quantity: 50,000 Metric Tons – Maximum Quantity: 500,000 Metric Tons per Month This type is the highest quality (class A). Diesel A is used in automotive vehicles, i.e. it is used in vehicles equipped with a diesel engine such as cars, trucks, buses and other vehicles. Payment: T/T Wire Transfer & MT103, SBLC MT760 Inspections: Indigenous Analysis Report or SGS Report CIF PROCEDURES To negotiate directly with the Operator.
