AP0CRYPH0N
FTID V1-V8 (EXTENDED EDITION)
What is FTID?
Fake tracking ID (FTID) takes place when a bad actor requests
a refund for an item and receives a return shipping label from
the business. Then, the bad actor attaches the shipping label to
an envelope, often junk mail, instead of returning the item.
FTID v1
In this version, you don’t do any changes on the label,
only box. This version is not very recommended, it’s
better to use V2 or V3 because they have higher
success rate for a lot of companies. Since seller can
easily find out that you sent an empty package, I never
used this one.
{extended}
However if you carefully cut out your product using a
razor blade and cutting along the edge of the longest
side you can remove your product then put heavy stuff
inside to mimic the weight. This will make it identical as
shippers are not allowed to open your packages.
Cut along the
seams(red lines).get
your stuff and fill it.
Then superglue the
seams together(with
clear glue).
Remember to mimic
the weight
Send the exact same
box back
FTID v2
In this version, we’re removing personal infos and order
related infos. For his version, I recommend to use
prepaid label if you’re able to get one. Once you have
label, remove all personal and order related infos from it.
By doing this company you’re refunding / SE’ing will not
be able to find your package.
{extended}
The fake details should rhyme or look similar to yours so
the mistake looks like it makes sense
Replace label with an
identical one without
your personal details.
FTID v3
In this version, we will change shipping address. On tracking it will say
“Delivered”, but package will never be delivered, not even sent to the
original destination.
How to perform:
If you got prepaid label, you don’t have to do anything. If you’re buying
label alone, put the address of the company you’re refunding/SE’ing.
Then, once you have the label, manually change the shipping address to
a different address which is in the same city. You can put any address,
best some another companies one. Make sure that they will accept your
package.It is very important that you change the address near the original
shipping address, because every label has a routing code which
automatically ships the package to the near location. Once it arrives, the
package will be shipped to the address which is noted on the label.
{extended}
ONLY CHANGE THE STREET OR APT NUMBER TO A REAL ONE. e.g if
your oder was 12 Rando RD change it to 24 Rando RD
Change this
and everything
else should be
identical or
rhyme.
Only change
the street and
region stuff
everything else
should be the
same!
FTID v4
Here we will use single side print flyers with and
advertisement on it and place the label (FTID3 one) on
the other side (without AD)
You would only use this for international orders, so it gets
through customs quicker or if you needed faster shipping
with say budget shipping labels.
{extended}
Send two instead of one and further confuse the
company and make them seem incompetent
Place the label her on the
side with no ad not this
side in the picture.
Send the duplicate a day
later than the original one.
It will confuse the system
FTID v5
Theres like infinite different versions of FTID5 but here is the barcode method:
- Use an online barcode reader (or one on your phone) to read the destination barcode.
I use https://www.onlinebarcodereader.com/
The destination barcode is typically the one located next to the QR code on a label.
- Once uploaded, take the number that it gives you (for exemple 42046288) and change
the last two digits. (we used to do only the last digit, but the last two is better)
So in our case, you would change it to something like 42046242
- Take that new number and use an online barcode generator to generate a new barcode
with the new number.
I use https://www.barcodesinc.com/generator/index.php
-Take the new barcode and paste it over the old one on the label with a photo editor.
- Take this label, print it out, cut to size and tape it to the Manila padded Envelope and
drop it in a DROP BOX for that specific carrier.
- Once the tracking number says “Delivered”, wait a day and contact the company’s
customer support team. Politely ask for your refund to be processed as its been
“returned”. (more than likely they will tell you to wait a day or two before they can process
the refund. This is normal. Have patience. Keep hitting up their support chat every two
days until they agree to process the refund.
{extended}
Throw water on the part of the package with the sticker, then
randomly smudge the label, but not to the point its unreadable!
Throw water there on the whole
damn box, just a cup of warm water
you can also add some dust ontop
of the water. This makes it seem
like warehouse damage is what
caused the mix up
FTID v5.1
Fake return is process in which you send item of a
similar weight and you’re sending it to the actual
company. Maybe you heard of dry ice method? That’s it.
{extended}
Throw water on it and lol bite the corners lightly dont
leave bite marks just deform it
This is always a backup if you fail at the other FTIDs
FTID v6
In this version, UPS will throw the box away and it’s
simple to do.
First you have to get your label. Attach to parcel, beat the
live fucking shit out of the parcel, send beaten up empty
parcel and courier will notice there’s something wrong
and throw the package away.
{extended}
Spray your package with shitty cologne(like AXE) and
instert small metallic things into the box, it will smell
weird by the time it gets to the courier and the metallic
pieces will make it seem like ware house debri fucked it
up and not you
I usually just nail 3 random screws into it. Remeber to
bitch about it when you call!
FTID v7(EXPERTS ONLY)
➔
➔
➔
➔
➔
1) Get the label
2) Remove address to their warehouse
3) Get a transparent ink that gets removed automatically in less than
48 hours (https://blueplanetink.com/shop/)
4) Write with the ink their warehouse address
5) Send the parcel
Warehouse address will be vanished when the courier will try to deliver and
it will mark the package as lost in transit.
You can use FTID v7 on multiple creative ways:
- copy the bar code with the invisible ink that gets removed in 48 hours
- copy the customer address with the invisible ink that gets removed in 48
hours
- With FTID version 7 you can make the parcel vanish, so LIT will be the
best with v7 or in case you want the package to get delivered, do not write
their address with the transparent ink and write the scan code.
{extended}
Fuck up other identifiers using the acetone trick see below.
FTID v8(EXPERTS ONLY)
USE FTID V5.1 + FTID V5 + FTID V7 on the exact same
box.
Then get either banana or egg. Coat random parts of the
box with the liquid from these things.
Once the box is in the system it will be in storage and
mould will grow on it (warehouses are dark and moist).
The courier will think the package has been in the
system lost for a very long time or they'll assume they
sent you a very old box that they switched out somehow
BONUS - DIY SCALE
Simply attach your boxes to the labeled parts and if it
stays relatively balanced then the weight is similar,
remember never have a drastic weight difference.
Only do this if you dont own a scale that can weight boxes
AP0CRYPH0N
FTID V1-V8 (EXTENDED EDITION)
What is FTID?
Fake tracking ID (FTID) takes place when a bad actor requests
a refund for an item and receives a return shipping label from
the business. Then, the bad actor attaches the shipping label to
an envelope, often junk mail, instead of returning the item.
FTID v1
In this version, you don’t do any changes on the label,
only box. This version is not very recommended, it’s
better to use V2 or V3 because they have higher
success rate for a lot of companies. Since seller can
easily find out that you sent an empty package, I never
used this one.
{extended}
However if you carefully cut out your product using a
razor blade and cutting along the edge of the longest
side you can remove your product then put heavy stuff
inside to mimic the weight. This will make it identical as
shippers are not allowed to open your packages.
Cut along the
seams(red lines).get
your stuff and fill it.
Then superglue the
seams together(with
clear glue).
Remember to mimic
the weight
Send the exact same
box back
FTID v2
In this version, we’re removing personal infos and order
related infos. For his version, I recommend to use
prepaid label if you’re able to get one. Once you have
label, remove all personal and order related infos from it.
By doing this company you’re refunding / SE’ing will not
be able to find your package.
{extended}
The fake details should rhyme or look similar to yours so
the mistake looks like it makes sense
Replace label with an
identical one without
your personal details.
FTID v3
In this version, we will change shipping address. On tracking it will say
“Delivered”, but package will never be delivered, not even sent to the
original destination.
How to perform:
If you got prepaid label, you don’t have to do anything. If you’re buying
label alone, put the address of the company you’re refunding/SE’ing.
Then, once you have the label, manually change the shipping address to
a different address which is in the same city. You can put any address,
best some another companies one. Make sure that they will accept your
package.It is very important that you change the address near the original
shipping address, because every label has a routing code which
automatically ships the package to the near location. Once it arrives, the
package will be shipped to the address which is noted on the label.
{extended}
ONLY CHANGE THE STREET OR APT NUMBER TO A REAL ONE. e.g if
your oder was 12 Rando RD change it to 24 Rando RD
Change this
and everything
else should be
identical or
rhyme.
Only change
the street and
region stuff
everything else
should be the
same!
FTID v4
Here we will use single side print flyers with and
advertisement on it and place the label (FTID3 one) on
the other side (without AD)
You would only use this for international orders, so it gets
through customs quicker or if you needed faster shipping
with say budget shipping labels.
{extended}
Send two instead of one and further confuse the
company and make them seem incompetent
Place the label her on the
side with no ad not this
side in the picture.
Send the duplicate a day
later than the original one.
It will confuse the system
FTID v5
Theres like infinite different versions of FTID5 but here is the barcode method:
- Use an online barcode reader (or one on your phone) to read the destination barcode.
I use https://www.onlinebarcodereader.com/
The destination barcode is typically the one located next to the QR code on a label.
- Once uploaded, take the number that it gives you (for exemple 42046288) and change
the last two digits. (we used to do only the last digit, but the last two is better)
So in our case, you would change it to something like 42046242
- Take that new number and use an online barcode generator to generate a new barcode
with the new number.
I use https://www.barcodesinc.com/generator/index.php
-Take the new barcode and paste it over the old one on the label with a photo editor.
- Take this label, print it out, cut to size and tape it to the Manila padded Envelope and
drop it in a DROP BOX for that specific carrier.
- Once the tracking number says “Delivered”, wait a day and contact the company’s
customer support team. Politely ask for your refund to be processed as its been
“returned”. (more than likely they will tell you to wait a day or two before they can process
the refund. This is normal. Have patience. Keep hitting up their support chat every two
days until they agree to process the refund.
{extended}
Throw water on the part of the package with the sticker, then
randomly smudge the label, but not to the point its unreadable!
Throw water there on the whole
damn box, just a cup of warm water
you can also add some dust ontop
of the water. This makes it seem
like warehouse damage is what
caused the mix up
FTID v5.1
Fake return is process in which you send item of a
similar weight and you’re sending it to the actual
company. Maybe you heard of dry ice method? That’s it.
{extended}
Throw water on it and lol bite the corners lightly dont
leave bite marks just deform it
This is always a backup if you fail at the other FTIDs
FTID v6
In this version, UPS will throw the box away and it’s
simple to do.
First you have to get your label. Attach to parcel, beat the
live fucking shit out of the parcel, send beaten up empty
parcel and courier will notice there’s something wrong
and throw the package away.
{extended}
Spray your package with shitty cologne(like AXE) and
instert small metallic things into the box, it will smell
weird by the time it gets to the courier and the metallic
pieces will make it seem like ware house debri fucked it
up and not you
I usually just nail 3 random screws into it. Remeber to
bitch about it when you call!
FTID v7(EXPERTS ONLY)
➔
➔
➔
➔
➔
1) Get the label
2) Remove address to their warehouse
3) Get a transparent ink that gets removed automatically in less than
48 hours (https://blueplanetink.com/shop/)
4) Write with the ink their warehouse address
5) Send the parcel
Warehouse address will be vanished when the courier will try to deliver and
it will mark the package as lost in transit.
You can use FTID v7 on multiple creative ways:
- copy the bar code with the invisible ink that gets removed in 48 hours
- copy the customer address with the invisible ink that gets removed in 48
hours
- With FTID version 7 you can make the parcel vanish, so LIT will be the
best with v7 or in case you want the package to get delivered, do not write
their address with the transparent ink and write the scan code.
{extended}
Fuck up other identifiers using the acetone trick see below.
FTID v8(EXPERTS ONLY)
USE FTID V5.1 + FTID V5 + FTID V7 on the exact same
box.
Then get either banana or egg. Coat random parts of the
box with the liquid from these things.
Once the box is in the system it will be in storage and
mould will grow on it (warehouses are dark and moist).
The courier will think the package has been in the
system lost for a very long time or they'll assume they
sent you a very old box that they switched out somehow
BONUS - DIY SCALE
Simply attach your boxes to the labeled parts and if it
stays relatively balanced then the weight is similar,
remember never have a drastic weight difference.
Only do this if you dont own a scale that can weight boxes
AP0CRYPH0N
FTID V1-V8 (EXTENDED EDITION)
What is FTID?
Fake tracking ID (FTID) takes place when a bad actor requests
a refund for an item and receives a return shipping label from
the business. Then, the bad actor attaches the shipping label to
an envelope, often junk mail, instead of returning the item.
FTID v1
In this version, you don’t do any changes on the label,
only box. This version is not very recommended, it’s
better to use V2 or V3 because they have higher
success rate for a lot of companies. Since seller can
easily find out that you sent an empty package, I never
used this one.
{extended}
However if you carefully cut out your product using a
razor blade and cutting along the edge of the longest
side you can remove your product then put heavy stuff
inside to mimic the weight. This will make it identical as
shippers are not allowed to open your packages.
Cut along the
seams(red lines).get
your stuff and fill it.
Then superglue the
seams together(with
clear glue).
Remember to mimic
the weight
Send the exact same
box back
FTID v2
In this version, we’re removing personal infos and order
related infos. For his version, I recommend to use
prepaid label if you’re able to get one. Once you have
label, remove all personal and order related infos from it.
By doing this company you’re refunding / SE’ing will not
be able to find your package.
{extended}
The fake details should rhyme or look similar to yours so
the mistake looks like it makes sense
Replace label with an
identical one without
your personal details.
FTID v3
In this version, we will change shipping address. On tracking it will say
“Delivered”, but package will never be delivered, not even sent to the
original destination.
How to perform:
If you got prepaid label, you don’t have to do anything. If you’re buying
label alone, put the address of the company you’re refunding/SE’ing.
Then, once you have the label, manually change the shipping address to
a different address which is in the same city. You can put any address,
best some another companies one. Make sure that they will accept your
package.It is very important that you change the address near the original
shipping address, because every label has a routing code which
automatically ships the package to the near location. Once it arrives, the
package will be shipped to the address which is noted on the label.
{extended}
ONLY CHANGE THE STREET OR APT NUMBER TO A REAL ONE. e.g if
your oder was 12 Rando RD change it to 24 Rando RD
Change this
and everything
else should be
identical or
rhyme.
Only change
the street and
region stuff
everything else
should be the
same!
FTID v4
Here we will use single side print flyers with and
advertisement on it and place the label (FTID3 one) on
the other side (without AD)
You would only use this for international orders, so it gets
through customs quicker or if you needed faster shipping
with say budget shipping labels.
{extended}
Send two instead of one and further confuse the
company and make them seem incompetent
Place the label her on the
side with no ad not this
side in the picture.
Send the duplicate a day
later than the original one.
It will confuse the system
FTID v5
Theres like infinite different versions of FTID5 but here is the barcode method:
- Use an online barcode reader (or one on your phone) to read the destination barcode.
I use https://www.onlinebarcodereader.com/
The destination barcode is typically the one located next to the QR code on a label.
- Once uploaded, take the number that it gives you (for exemple 42046288) and change
the last two digits. (we used to do only the last digit, but the last two is better)
So in our case, you would change it to something like 42046242
- Take that new number and use an online barcode generator to generate a new barcode
with the new number.
I use https://www.barcodesinc.com/generator/index.php
-Take the new barcode and paste it over the old one on the label with a photo editor.
- Take this label, print it out, cut to size and tape it to the Manila padded Envelope and
drop it in a DROP BOX for that specific carrier.
- Once the tracking number says “Delivered”, wait a day and contact the company’s
customer support team. Politely ask for your refund to be processed as its been
“returned”. (more than likely they will tell you to wait a day or two before they can process
the refund. This is normal. Have patience. Keep hitting up their support chat every two
days until they agree to process the refund.
{extended}
Throw water on the part of the package with the sticker, then
randomly smudge the label, but not to the point its unreadable!
Throw water there on the whole
damn box, just a cup of warm water
you can also add some dust ontop
of the water. This makes it seem
like warehouse damage is what
caused the mix up
FTID v5.1
Fake return is process in which you send item of a
similar weight and you’re sending it to the actual
company. Maybe you heard of dry ice method? That’s it.
{extended}
Throw water on it and lol bite the corners lightly dont
leave bite marks just deform it
This is always a backup if you fail at the other FTIDs
FTID v6
In this version, UPS will throw the box away and it’s
simple to do.
First you have to get your label. Attach to parcel, beat the
live fucking shit out of the parcel, send beaten up empty
parcel and courier will notice there’s something wrong
and throw the package away.
{extended}
Spray your package with shitty cologne(like AXE) and
instert small metallic things into the box, it will smell
weird by the time it gets to the courier and the metallic
pieces will make it seem like ware house debri fucked it
up and not you
I usually just nail 3 random screws into it. Remeber to
bitch about it when you call!
FTID v7(EXPERTS ONLY)
➔
➔
➔
➔
➔
1) Get the label
2) Remove address to their warehouse
3) Get a transparent ink that gets removed automatically in less than
48 hours (https://blueplanetink.com/shop/)
4) Write with the ink their warehouse address
5) Send the parcel
Warehouse address will be vanished when the courier will try to deliver and
it will mark the package as lost in transit.
You can use FTID v7 on multiple creative ways:
- copy the bar code with the invisible ink that gets removed in 48 hours
- copy the customer address with the invisible ink that gets removed in 48
hours
- With FTID version 7 you can make the parcel vanish, so LIT will be the
best with v7 or in case you want the package to get delivered, do not write
their address with the transparent ink and write the scan code.
{extended}
Fuck up other identifiers using the acetone trick see below.
FTID v8(EXPERTS ONLY)
USE FTID V5.1 + FTID V5 + FTID V7 on the exact same
box.
Then get either banana or egg. Coat random parts of the
box with the liquid from these things.
Once the box is in the system it will be in storage and
mould will grow on it (warehouses are dark and moist).
The courier will think the package has been in the
system lost for a very long time or they'll assume they
sent you a very old box that they switched out somehow
BONUS - DIY SCALE
Simply attach your boxes to the labeled parts and if it
stays relatively balanced then the weight is similar,
remember never have a drastic weight difference.
Only do this if you dont own a scale that can weight boxes