QUESTION 1
Which two methods are the most common methods to control and restrict administrative access on
FortiAnalyzer? (Choose two.)
A. Virtual domains
B. Administrative access profiles
C. Trusted hosts
D. Security Fabric
Answer: BC
Explanation:
Reference: https://docs2.fortinet.com/document/fortianalyzer.0.0/administrationguide/
219292/administrator-profiles
https://docs2.fortinet.com/document/fortianalyzer.0.0/administration-guide222/trustedhosts
QUESTION 2
Which daemon is responsible for enforcing raw log file size?
A. logfiled
B. oftpd
C. sqlplugind
D. miglogd
Answer: A
Explanation:
QUESTION 3
An administrator has configured the following settings:
config system global set log-checksum md5-auth
end What is the significance of executing this command?
A. This command records the log file MD5 hash value.
B. This command records passwords in log files and encrypts them.
C. This command encrypts log transfer between FortiAnalyzer and other devices.
D. This command records the log file MD5 hash value and authentication code.
Answer: D
Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer.4.6/administrationguide/
410387/appendix-b-log-integrity-and-secure-log-transfer
QUESTION 4
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report
externally?
(Choose two.)
A. Mail server
B. Output profile
C. SFTP server
D. Report scheduling
Answer: AB
Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer.0.2/administrationguide/
598322/creating-output-profiles
QUESTION 5
For which two purposes would you use the command set log checksum? (Choose two.)
A. To help protect against man-in-the-middle attacks during log upload from FortiAnalyzer to an SFTP server
B. To prevent log modification or tampering
C. To encrypt log communications
D. To send an identical set of logs to a second logging server
Answer: A, B
Explanation:
To prevent logs from being tampered with while in storage, you can add a log checksum using the config
system global command. You can configure FortiAnalyzer to record a log file hash value, timestamp, and
authentication code when the log is rolled and archived and when the log is uploaded (if that feature is
enabled). This can also help against man-in-the-middle only for the transmission from FortiAnalyzer to an
SSH File Transfer Protocol (SFTP) server during log upload.
FortiAnalyzer_7.0_Study_Guide-Online page 149
QUESTION 6
Refer to the exhibit.
What does the data point at 14:55 tell you?
A. The received rate is almost at its maximum for this device
B. The sqlplugind daemon is behind in log indexing by two logs
C. Logs are being dropped
D. Raw logs are reaching FortiAnalyzer faster than they can be indexed
Answer: D
Explanation:
QUESTION 7
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on
FortiAnalyzer has failed.
What is the recommended method to replace the disk?
A. Shut down FortiAnalyzer and then replace the disk
B. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
C. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
D. Perform a hot swap
Answer: A
Explanation:
https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-Hard-Disk-onFortiAnalyzer/tap/
194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%20
hot%20swapping
QUESTION 8
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
A. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
B. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
C. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
D. FortiAnalyzer is functioning normally
Answer: C
Explanation:
Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachmentscb0dce6-dbef-11e98977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
QUESTION 9
In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not
resolving to a hostname.
How can you resolve the source and destination IP addresses, without introducing any additional
performance impact to FortiAnalyzer?
A. Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve
B. Configure # set resolve-ip enable in the system FortiView settings
C. Configure local DNS servers on FortiAnalyzer
D. Resolve IP addresses on FortiGate
Answer: D
Explanation:
https://packetplant.com/fortigate-and-fortianalyzer-resolve-source-and-destination-ip/
"?As a best practice, it is recommended to resolve IPs on the FortiGate end. This is because you get
both source and destination, and it offloads the work from FortiAnalyzer. On FortiAnalyzer, this IP
resolution does destination IPs only?
QUESTION 10
You have recently grouped multiple FortiGate devices into a single ADOM. System Settings > Storage Info
shows the quota used.
What does the disk quota refer to?
A. The maximum disk utilization for each device in the ADOM
B. The maximum disk utilization for the FortiAnalyzer model
C. The maximum disk utilization for the ADOM type
D. The maximum disk utilization for all devices in the ADOM
Answer: D
Explanation:
QUESTION 11
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
A. To properly correlate logs
B. To use real-time forwarding
C. To resolve host names
D. To improve DNS response times
Answer: A
Explanation:
QUESTION 12
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is
temporarily unavailable?
A. FortiAnalyzer uses log fetching to retrieve the logs when back online
B. FortiGate uses the miglogd process to cache the logs
C. The logfiled process stores logs in offline mode
D. Logs are dropped
Answer: B
Explanation:
QUESTION 13
After you have moved a registered logging device out of one ADOM and into a new ADOM, what is
the purpose of running the following CLI command?
execute sql-local rebuild-adom <new-ADOM-name>
A. To reset the disk quota enforcement to default
B. To remove the analytics logs of the device from the old database
C. To migrate the archive logs to the new ADOM
D. To populate the new ADOM with analytical logs for the moved device, so you can run reports
Answer: D
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 128: Are the device analytics logs required for
reports in the new ADOM? If so, rebuild the new ADOM database
QUESTION 14
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the
FortiAnalyzer back to functioning normally, without losing data?
A. Hot swap the disk
B. Replace the disk and rebuild the RAID manually
C. Take no action if the RAID level supports a failed disk
D. Shut down FortiAnalyzer and replace the disk
Answer: D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD46446#:~:text=On%20FortiAnalyzer%2F
FortiManager%20devices%20that,to%20exchanging%20the%20hard%20disk.
If a hard disk on a FortiAnalyzer unit fails, it must be replaced. On FortiAnalyzer devices that support
hardware RAID, the hard disk can be replaced while the unit is still running "? known as hot swapping.
On FortiAnalyzer units with software RAID, the device must be shutdown prior to exchanging the
hard disk.
Reference: https://community.fortinet.com/t5/FortiAnalyzer/Technical-Note-How-to-swap-HardDisk-on-FortiAnalyzer/tap/
194997?externalID=FD41397#:~:text=If%20a%20hard%20disk%20on,process%20known%20as%20
hot%20swapping
QUESTION 15
If you upgrade the FortiAnalyzer firmware, which report element can be affected?
A. Custom datasets
B. Report scheduling
C. Report settings
D. Output profiles
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/upgrade-guide9300/checking-reports
QUESTION 16
FortiAnalyzer reports are dropping analytical data from 15 days ago, even though the data policy
setting for analytics logs is 60 days.
What is the most likely problem?
A. Quota enforcement is acting on analytical data before a report is complete
B. Logs are rolling before the report is run
C. CPU resources are too high
D. Disk utilization for archive logs is set for 15 days
Answer: B
Explanation:
Reference: https://forum.fortinet.com/tm.aspx?m=138806
QUESTION 17
Which log type does the FortiAnalyzer indicators of compromise feature use to identify infected hosts?
A. Antivirus logs
B. Web filter logs
C. IPS logs
D. Application control logs
Answer: B
Explanation:
Reference: https://help.fortinet.com/fa/faz50hlp-0-2/Content/
FortiAnalyzer_Admin_Guide0_FortiView/0200_Using_FortiView0_Compromised_hosts_pa
ge.htm?
TocPath=FortiView%7CUsing%20FortiView%7C_____6
QUESTION 18
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to
authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
A. A local wildcard administrator account
B. A remote LDAP server
C. A trusted host profile that restricts access to the LDAP group
D. An administrator group
Answer: A, B
Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD38567
QUESTION 19
When you perform a system backup, what does the backup configuration contain? (Choose two.)
A. Generated reports
B. Device list
C. Authorized devices logs
D. System information
Answer: B, D
Explanation:
https://help.fortinet.com/fa/cli-olh-6-5/Content/Document0_execute/backup.htm
Reference: https://help.fortinet.com/fauth2/Content/Admin%20Guides_2%20Admin%20Guide_Dashboard.htm
QUESTION 20
Which clause is considered mandatory in SELECT statements used by the FortiAnalyzer to generate reports?
A. FROM
B. LIMIT
C. WHERE
D. ORDER BY
Answer: A
Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48500
QUESTION 21
What is the purpose of a dataset query in FortiAnalyzer?
A. It sorts log data into tables
B. It extracts the database schema
C. It retrieves log data from the database
D. It injects log data into the database
Answer: C
Explanation:
Reference: https://docs2.fortinet.com/document/fortianalyzer.0.4/administrationguide/
148744/creating-datasets
QUESTION 22
Logs are being deleted from one of the ADOMs earlier than the configured setting for archiving in the data policy.
What is the most likely problem?
A. CPU resources are too high
B. Logs in that ADOM are being forwarded, in real-time, to another FortiAnalyzer device
C. The total disk space is insufficient and you need to add other disk
D. The ADOM disk quota is set too low, based on log rates
Answer: D
Explanation:
Reference: https://help.fortinet.com/fmgrhlp-6-1/FMGFAZ/
1100_Storage/0017_Deleted%20device%
20logs.htm
QUESTION 23
Which two constraints can impact the amount of reserved disk space required by FortiAnalyzer?
(Choose two.)
A. License type
B. Disk size
C. Total quota
D. RAID level
Answer: B, D
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide682/disk-spaceallocation
QUESTION 24
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
A. The disk quota for the FortiAnalyzer model
B. The disk quota for all devices in the ADOM
C. The disk quota for each device in the ADOM
D. The disk quota for the ADOM type
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.0/administration-guide3670/configuringlogstorage-policy
QUESTION 25
You've moved a registered logging device out of one ADOM and into a new ADOM. What happens
when you rebuild the new ADOM database?
A. FortiAnalyzer resets the disk quota of the new ADOM to default.
B. FortiAnalyzer migrates archive logs to the new ADOM.
C. FortiAnalyzer migrates analytics logs to the new ADOM.
D. FortiAnalyzer removes logs from the old ADOM.
Answer: C
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD40383
QUESTION 26
What happens when a log file saved on FortiAnalyzer disks reaches the size specified in the device
log
settings?
A. The log file is stored as a raw log and is available for analytic support.
B. The log file rolls over and is archived.
C. The log file is purged from the database.
D. The log file is overwritten.
Answer: B
Explanation:
Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachmentsd9f8fb56cf4-11e981a4-00505692583a/FortiAnalyzer-6.0.5-Administration-Guide.pdf
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide632/log-browse
QUESTION 27
What is the purpose of employing RAID with FortiAnalyzer?
A. To introduce redundancy to your log data
B. To provide data separation between ADOMs
C. To separate analytical and archive data
D. To back up your logs
Answer: A
Explanation:
https://en.wikipedia.org/wiki/RAID#:~:text=RAID%20(%22Redundant%20Array%20of%20Inexpensiv
e,%2C%20performance%20improvement%2C%20or%20both.
QUESTION 28
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe
from
another FortiAnalyzer device?
A. Log upload
B. Indicators of Compromise
C. Log forwarding an aggregation mode
D. Log fetching
Answer: D
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.0/administration-guide1442/fetchermanagement
QUESTION 29
What is the recommended method of expanding disk space on a FortiAnalyzer VM?
A. From the VM host manager, add an additional virtual disk and use the #execute lvm extend <disk
number> command to expand the storage
B. From the VM host manager, expand the size of the existing virtual disk
C. From the VM host manager, expand the size of the existing virtual disk and use the # execute
format disk command to reformat the disk
D. From the VM host manager, add an additional virtual disk and rebuild your RAID array
Answer: A
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD40848
QUESTION 30
How are logs forwarded when FortiAnalyzer is using aggregation mode?
A. Logs are forwarded as they are received and content files are uploaded at a scheduled time.
B. Logs and content files are stored and uploaded at a scheduled time.
C. Logs are forwarded as they are received.
D. Logs and content files are forwarded as they are received.
Answer: B
Explanation:
https://www.fortinetguru.com0/07/log-forwarding-fortianalyzer-fortios-6-2-3/
https://docs.fortinet.com/document/fortianalyzer.2.0/administration-guide493/modes
Reference: https://docs.fortinet.com/document/fortianalyzer.2.0/cookbook238/what-is-thedifferencebetween-log-forward-and-log-aggregation-modes
QUESTION 31
How do you restrict an administrator's access to a subset of your organization's ADOMs?
A. Set the ADOM mode to Advanced
B. Assign the ADOMs to the administrator's account
C. Configure trusted hosts
D. Assign the default Super_User administrator profile
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide7578/assigningadministratorsto-an-adom
QUESTION 32
In order for FortiAnalyzer to collect logs from a FortiGate device, what configuration is required?
(Choose two.)
A. Remote logging must be enabled on FortiGate
B. Log encryption must be enabled
C. ADOMs must be enabled
D. FortiGate must be registered with FortiAnalyzer
Answer: AD
Explanation:
Pg 70: "?after you add and register a FortiGate device with the FortiAnalyzer unit, you must also
ensure that the FortiGate device is configured to send logs to the FortiAnalyzer unit."?
https://docs.fortinet.com/uploaded/files4/FortiAnalyzer-5.4.6-Administration%20Guide.pdf
Pg 45: "?ADOMs must be enabled to support the logging and reporting of NON-FORTIGATE devices,
such as FortiCarrier, FortiClientEMS, FortiMail, FortiWeb, FortiCache, and FortiSandbox."?
QUESTION 33
What can the CLI command # diagnose test application oftpd 3 help you to determine?
A. What devices and IP addresses are connecting to FortiAnalyzer
B. What logs, if any, are reaching FortiAnalyzer
C. What ADOMs are enabled and configured
D. What devices are registered and unregistered
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/cli-reference556/test#test_application
QUESTION 34
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search
result?
A. Chart Builder
B. Export to Report Chart
C. Dataset Library
D. Custom View
Answer: B
Explanation:
QUESTION 35
In FortiAnalyzer's FormView, source and destination IP addresses from FortiGate devices are not
resolving to
a hostname. How can you resolve the source and destination IPs, without introducing any additional
performance impact to FortiAnalyzer?
A. Configure local DNS servers on FortiAnalyzer
B. Resolve IPs on FortiGate
C. Configure # set resolve-ip enable in the system FortiView settings
D. Resolve IPs on a per-ADOM basis to reduce delay on FortiView while IPs resolve
Answer: B
Explanation:
QUESTION 36
What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external
server?
(Choose two.)
A. SFTP, FTP, or SCP server
B. Mail server
C. Output profile
D. Report scheduling
Answer: AC
Explanation:
https://docs.fortinet.com/document/fortianalyzer.0.2/administration-guide322/creatingoutputprofiles
QUESTION 37
View the exhibit.
Why is the total quota less than the total system storage?
A. 3.6% of the system storage is already being used.
B. Some space is reserved for system use, such as storage of compression files, upload files, and
temporary report files
C. The oftpd process has not archived the logs yet
D. The logfiled process is just estimating the total quota
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide682/disk-spaceallocation
QUESTION 38
What purposes does the auto-cache setting on reports serve? (Choose two.)
A. To reduce report generation time
B. To automatically update the hcache when new logs arrive
C. To reduce the log insert lag rate
D. To provide diagnostics on report generation time
Answer: AB
Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer.0.0/administrationguide/
282280/enabling-autocache
QUESTION 39
If you upgrade your FortiAnalyzer firmware, what report elements can be affected?
A. Output profiles
B. Report settings
C. Report scheduling
D. Custom datasets
Answer: D
Explanation:
QUESTION 40
How does FortiAnalyzer retrieve specific log data from the database?
A. SQL FROM statement
B. SQL GET statement
C. SQL SELECT statement
D. SQL EXTRACT statement
Answer: A
Explanation:
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachmentsbb60e-ff37-11e88524-f8bc1258b856/fortianalyzer-fortigate-sql-technote-40-mr2.pdf
QUESTION 41
On FortiAnalyzer, what is a wildcard administrator account?
A. An account that permits access to members of an LDAP group
B. An account that allows guest access with read-only privileges
C. An account that requires two-factor authentication
D. An account that validates against any user account on a FortiAuthenticator
Answer: A
Explanation:
https://docs.fortinet.com/document/fortigate.2.0/cookbook7268/configuring-wildcard-adminaccounts
QUESTION 42
For proper log correlation between the logging devices and FortiAnalyzer, FortiAnalyzer and all
registered
devices should:
A. Use DNS
B. Use host name resolution
C. Use real-time forwarding
D. Use an NTP server
Answer: D
Explanation:
QUESTION 43
What FortiGate process caches logs when FortiAnalyzer is not reachable?
A. logfiled
B. sqlplugind
C. oftpd
D. miglogd
Answer: D
Explanation:
Reference: https://forum.fortinet.com/tm.aspx?m=143106
QUESTION 44
FortiAnalyzer uses the Optimized Fabric Transfer Protocok (OFTP) over SSL for what purpose?
A. To upload logs to an SFTP server
B. To prevent log modification during backup
C. To send an identical set of logs to a second logging server
D. To encrypt log communication between devices
Answer: D
Explanation:
QUESTION 45
How can you configure FortiAnalyzer to permit administrator logins from only specific locations?
A. Use static routes
B. Use administrative profiles
C. Use trusted hosts
D. Use secure protocols
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide508/trusted-hosts
QUESTION 46
Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in
your data policy. What is the most likely problem?
A. The total disk space is insufficient and you need to add other disk.
B. CPU resources are too high.
C. The ADOM disk quota is set too low based on log rates.
D. Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.
Answer: C
Explanation:
https://help.fortinet.com/fmgrhlp-6-1/FMG
FAZ0_Storage/0017_Deleted%20device%20logs.htm
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide802/automaticdeletion
QUESTION 47
What is the purpose of the following CLI command?
A. To add a log file checksum
B. To add the MD's hash value and authentication code
C. To add a unique tag to each log to prove that it came from this FortiAnalyzer
D. To encrypt log communications
Answer: A
Explanation:
https://docs2.fortinet.com/document/fortianalyzer.0.3/cli-reference9211/global
QUESTION 48
View the exhibit.
What does the data point at 14:35 tell you?
A. FortiAnalyzer is dropping logs.
B. FortiAnalyzer is indexing logs faster than logs are being received.
C. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
D. The sqlplugind daemon is ahead in indexing by one log.
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide90/insert-rate-vsreceiverate-widget
QUESTION 49
What remote authentication servers can you configure to validate your FortiAnalyzer administrator
logons? (Choose three)
A. RADIUS
B. Local
C. LDAP
D. PKI
E. TACACS+
Answer: ACE
Explanation:
QUESTION 50
What statements are true regarding disk log quota? (Choose two)
A. The FortiAnalyzer stops logging once the disk log quota is met.
B. The FortiAnalyzer automatically sets the disk log quota based on the device.
C. The FortiAnalyzer can overwrite the oldest logs or stop logging once the disk log quota is met.
D. The FortiAnalyzer disk log quota is configurable, but has a minimum o 100mb a maximum based
on the reserved system space.
Answer: CD
Explanation:
QUESTION 51
What statements are true regarding FortiAnalyzer 's treatment of high availability (HA) dusters?
(Choose two)
A. FortiAnalyzer distinguishes different devices by their serial number.
B. FortiAnalyzer receives logs from d devices in a duster.
C. FortiAnalyzer receives bgs only from the primary device in the cluster.
D. FortiAnalyzer only needs to know (he serial number of the primary device in the cluster-it
automaticaly discovers the other devices.
Answer: AB
Explanation:
QUESTION 52
What are the operating modes of FortiAnalyzer? (Choose two)
A. Standalone
B. Manager
C. Analyzer
D. Collector
Answer: CD
Explanation:
QUESTION 53
Which statements are correct regarding FortiAnalyzer reports? (Choose two)
A. FortiAnalyzer provides the ability to create custom reports.
B. FortiAnalyzer glows you to schedule reports to run.
C. FortiAnalyzer includes pre-defined reports only.
D. FortiAnalyzer allows reporting for FortiGate devices only.
Answer: A B
Explanation:
QUESTION 54
Which tabs do not appear when FortiAnalyzer is operating in Collector mode?
A. FortiView
B. Event Management
C. Device Manger
D. Reporting
Answer: B
Explanation:
QUESTION 55
FortiAnalyzer centralizes which functions? (Choose three)
A. Network analysis
B. Graphical reporting
C. Content archiving / data mining
D. Vulnerability assessment
E. Security log analysis / forensics
Answer: BCE
Explanation:
QUESTION 56
By default, what happens when a log file reaches its maximum file size?
A. FortiAnalyzer overwrites the log files.
B. FortiAnalyzer stops logging.
C. FortiAnalyzer rolls the active log by renaming the file.
D. FortiAnalyzer forwards logs to syslog.
Answer: C
Explanation:
QUESTION 57
Which statements are true of Administrative Domains (ADOMs) in FortiAnalyzer? (Choose two.)
A. ADOMs are enabled by default.
B. ADOMs constrain other administrator's access privileges to a subset of devices in the device list.
C. Once enabled, the Device Manager, FortiView, Event Management, and Reports tab display per
ADOM.
D. All administrators can create ADOMs--not just the admin administrator.
Answer: B,C
Explanation:
QUESTION 58
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate
with SSL? (Choose two.)
A. SSL is the default setting.
B. SSL communications are auto-negotiated between the two devices.
C. SSL can send logs in real-time only.
D. SSL encryption levels are globally set on FortiAnalyzer.
E. FortiAnalyzer encryption level must be equal to, or higher than, FortiGate.
Answer: A,D
Explanation:
QUESTION 59
What are two of the key features of FortiAnalyzer? (Choose two.)
A. Centralized log repository
B. Cloud-based management
C. Reports
D. Virtual domains (VDOMs)
Answer: A,C
Explanation:
QUESTION 60
What statements are true regarding the "store and upload" log transfer option between
FortiAnalyzer and FortiGate? (Choose three.)
A. All FortiGates can send logs to FortiAnalyzer using the store and upload option.
B. Only FortiGate models with hard disks can send logs to FortiAnalyzer using the store and upload
option.
C. Both secure communications methods (SSL and IPsec) allow the store and upload option.
D. Disk logging is enabled on the FortiGate through the CLI only.
E. Disk logging is enabled by default on the FortiGate.
Answer: B,C,D
Explanation:
QUESTION 61
Which statements are true regarding securing communications between FortiAnalyzer and FortiGate
with IPsec? (Choose two.)
A. Must configure the FortiAnalyzer end of the tunnel only--the FortiGate end is auto-negotiated.
B. Must establish an IPsec tunnel ID and pre-shared key.
C. IPsec cannot be enabled if SSL is enabled as well.
D. IPsec is only enabled through the CLI on FortiAnalyzer.
Answer: BD
Explanation:
Option B is correct because you must establish an IPsec tunnel ID and pre-shared key to secure the
communication between FortiAnalyzer and FortiGate with IPsec12. The tunnel ID is a unique
identifier for each tunnel and the pre-shared key is a secret passphrase that authenticates the peers.
Option D is correct because IPsec is only enabled through the CLI on FortiAnalyzer1. You cannot
configure IPsec settings through the GUI on FortiAnalyzer.
QUESTION 62
Which two statements about log forwarding are true? (Choose two.)
A. Forwarded logs cannot be filtered to match specific criteria.
B. Logs are forwarded in real-time only.
C. The client retains a local copy of the logs after forwarding.
D. You can use aggregation mode only with another FortiAnalyzer.
Answer: CD
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide493/modes
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide1804/logforwarding
QUESTION 63
Which two methods can you use to send event notifications when an event occurs that matches a
configured
event handler? (Choose two.)
A. SMS
B. Email
C. SNMP
D. IM
Answer: BC
Explanation:
Reference: https://help.fortinet.com/fa/faz50hlp-0-2/Content/
FortiAnalyzer_Admin_Guide0_Events/0200_Event_handlers/0600_Create_event_handlers.htm
Reference: https://help.fortinet.com/fa/faz50hlp-02/Content/FortiAnalyzer_Admin_Guide0_Events/0200_Event_handlers/0600_Create_event_ha
ndlers.htm
QUESTION 64
Consider the CLI command:
What is the purpose of the command?
A. To add a unique tag to each log to prove that it came from this FortiAnalyzer
B. To add the MD5 hash value and authentication code
C. To add a log file checksum
D. To encrypt log communications
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/cli-reference9211/global
QUESTION 65
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?
A. Log correlation
B. Host name resolution
C. Log collection
D. Real-time forwarding
Answer: A
Explanation:
QUESTION 66
What are two advantages of setting up fabric ADOM? (Choose two.)
A. It can be used for fast data processing and log correlation
B. It can be used to facilitate communication between devices in same Security Fabric
C. It can include all Fortinet devices that are part of the same Security Fabric
D. It can include only FortiGate devices that are part of the same Security Fabric
Answer: AC
Explanation:
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide471/creating-asecurityfabric-adom
QUESTION 67
What is the purpose of a predefined template on the FortiAnalyzer?
A. It can be edited and modified as required
B. It specifies the report layout which contains predefined texts, charts, and macros
C. It specifies report settings which contains time period, device selection, and schedule
D. It contains predefined data to generate mock reports
Answer: B
Explanation:
Reference: https://help.fortinet.com/fa/faz50hlp-6-2/FMGFAZ/
2300_Reports/0010_Predefined_reports.htm#:~:text=FortiAnalyzer%20includes%20a%20number%
20of,create%20and%2For%20build%20reports.&text=A%20template%20populates%20the%20Layou
t,that%
20is%20to%20be%20created.
https://help.fortinet.com/fa/faz50hlp-6-2/FMGFAZ/
2300_Reports/0010_Predefined_reports.htm
Reference: https://docs2.fortinet.com/document/fortianalyzer.0.8/administrationguide/
618245/predefined-reports-templates-charts-and-macros
QUESTION 68
For which two SAML roles can the FortiAnalyzer be configured? (Choose two.)
A. Principal
B. Service provider
C. Identity collector
D. Identity provider
Answer: BD
Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer.2.0/new-features7811/samladminauthentication#:~:
text=for%20the%20administrator.,FortiAnalyzer%20can%20play%20the%20role%20of%
20the%20identity%20provider%20(IdP,external%20identity%20provider%20is%20available.
https://docs.fortinet.com/document/fortianalyzer.2.0/administration-guide1386/saml-adminauthentication
In FortiAnalyzer, SAML can be enabled across all Security Fabric devices, enabling smooth movement
between devices for the administrator by means of single sign-on (SSO).
FortiAnalyzer can play the role of the identity provider (IdP), the service provider (SP), or Fabric SP,
when an external identity provider is available.
FortiAnalyzer_7.0_Study_Guide-Online pag. 48
QUESTION 69
Which two purposes does the auto cache setting on reports serve? (Choose two.)
A. It automatically updates the hcache when new logs arrive.
B. It provides diagnostics on report generation time.
C. It reduces the log insert lag rate.
D. It reduces report generation time.
Answer: AD
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide416/how-autocacheworks
https://docs.fortinet.com/document/fortianalyzer.2.5/administration-guide926/enabling-autocache
QUESTION 70
What are offline logs on FortiAnalyzer?
A. Compressed logs, which are also known as archive logs, are considered to be offline logs.
B. When you restart FortiAnalyzer. all stored logs are considered to be offline logs.
C. Logs that are indexed and stored in the SQL database.
D. Logs that are collected from offline devices after they boot up.
Answer: A
Explanation:
Reference: https://help.fortinet.com/fa/faz50hlp-66/Content/FortiAnalyzer_Admin_Guide/0300_Key_concepts/0600_Log_Storage/0400_Archive_anal
ytics_logs.htm
Logs are received and saved in a log file on the FortiAnalyzer disks. Eventually, when the log file
reaches a configured size, or at a set schedule, it is rolled over by being renamed. These files (rolled
or otherwise) are known as archive logs and are considered offline so they don't offer immediate
analytic support. Combined, they count toward the archive quota and retention limits, and they are
deleted based on the ADOM data policy. FortiAnalyzer_7.0_Study_Guide-Online page 140
QUESTION 71
Which two statements are true regarding log fetching on FortiAnalyzer? (Choose two.)
A. A FortiAnalyzer device can perform either the fetch server or client role, and it can perform two
roles at the same time with the same FortiAnalyzer devices at the other end.
B. Log fetching can be done only on two FortiAnalyzer devices that are running the same firmware version.
C. Log fetching allows the administrator to fetch analytics logs from another FortiAnalyzer for redundancy.
D. Log fetching allows the administrator to run queries and reports against historical data by
retrieving archived logs from one FortiAnalyzer device and sending them to another FortiAnalyzer
device.
Answer: B, D
Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer.0.1/administrationguide/
651442/fetcher-management
Using FortiAnalyzer, you can enable log fetching. This allows FortiAnalyzer to fetch the archived logs
of specified devices from another FortiAnalyzer, which you can then run queries or reports on for
forensic analysis.
The FortiAnalyzer device that fetches logs operates as the fetch client, and the other FortiAnalyzer
device that sends logs operates as the fetch server. Log fetching can happen only between two
FortiAnalyzer devices, and both of them must be running the same firmware version. A FortiAnalyzer
device can perform either the fetch server or client role, and it can perform two roles at the same
time with different FortiAnalyzer devices at the other end.
FortiAnalyzer_7.0_Study_Guide-Online pag. 168
QUESTION 72
An administrator has configured the following settings:
config system fortiview settings set resolve-ip enable end
What is the significance of executing this command?
A. Use this command only if the source IP addresses are not resolved on FortiGate.
B. It resolves the source and destination IP addresses to a hostname in FortiView on FortiAnalyzer.
C. You must configure local DNS servers on FortiGate for this command to resolve IP addresses on Forti Analyzer.
D. It resolves the destination IP address to a hostname in FortiView on FortiAnalyzer.
Answer: D
Explanation:
Reference: https://community.fortinet.com/t5/Fortinet-Forum/Hostnames-in-FortiAnalyzer/mp/
95351?m=156950
QUESTION 73
Which two statements are true regarding ADOM modes? (Choose two.)
A. You can only change ADOM modes through CLI.
B. In normal mode, the disk quota of the ADOM is fixed and cannot be modified, but in advance
mode, the disk quota of the ADOM is flexible because new devices are added to the ADOM.
C. In an advanced mode ADOM. you can assign FortiGate VDOMs from a single FortiGate device to
multiple FortiAnalyzer ADOMs.
D. Normal mode is the default ADOM mode.
Answer: CD
Explanation:
Reference: https://help.fortinet.com/fa/faz50hlp-6-1/FMGFAZ/
0800_ADOMs/0400_ADOM%20Device%20Modes.htm
QUESTION 74
Which two statements are true regarding FortiAnalyzer log forwarding? (Choose two.)
A. Both modes, forwarding and aggregation, support encryption of logs between devices.
B. In aggregation mode, you can forward logs to syslog and CEF servers as well.
C. Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device
at a scheduled time.
D. Forwarding mode forwards logs in real time only to other FortiAnalyzer devices.
Answer: A, C
Explanation:
A) FortiAnalyzer_7.0_Study_Guide-Online.pdf page 148: The log communication between devices
can be protected by encryption, with the desired encryption level, using the commands shown on
the slide. (You need to interpret this. "Real time" and "aggregation" is about the "moment" when
Fortigate sends the logs. However, no matter the moment, Fortigate will upload logs encrypted or
unencrypted based on previous / differente config).
C) FortiAnalyzer_7.0_Study_Guide-Online.pdf page 147: Aggregation: Logs and content files stored
and uploaded at scheduled time.
QUESTION 75
An administrator has moved FortiGate A from the root ADOM to ADOM1. However, the
administrator is not able to generate reports for FortiGate A in ADOM1.
What should the administrator do to solve this issue?
A. Use the execute sql-local rebuild-db command to rebuild all ADOM databases.
B. Use the execute sql-local rebuild-adom ADOM1 command to rebuild the ADOM database.
C. Use the execute sql-report run ADOM1 command to run a report.
D. Use the execute sql-local rebuild-adom root command to rebuild the ADOM database.
Answer: B
Explanation:
Reference: https://help.fortinet.com/fmgr/cli-6-1/FortiManager_CLI_Reference0_execute/sqllocal+.
htm
QUESTION 76
Which statement is true regarding Macros on FortiAnalyzer?
A. Macros are ADOM specific and each ADOM will have unique macros relevant to that ADOM.
B. Macros are supported only on the FortiGate ADOM.
C. Macros are useful in generating excel log files automatically based on the reports settings.
D. Macros are predefined templates for reports and cannot be customized.
Answer: A
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 283: Note that macros are ADOM-specific and
supported in FortiGate and FortiCarrier ADOMs only.
QUESTION 77
Which two statements are true regarding FortiAnalyzer operating modes? (Choose two.)
A. When in collector mode, FortiAnalyzer collects logs from multiple devices and forwards these logs
in the original binary format.
B. Collector mode is the default operating mode.
C. When in collector mode. FortiAnalyzer supports event management and reporting features.
D. By deploying different FortiAnalyzer devices with collector and analyzer mode in a network, you
can improve the overall performance of log receiving, analysis, and reporting
Answer: AD
Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer.0.0/administrationguide/
227478/collector-mode
https://docs.fortinet.com/document/fortianalyzer.0.0/administration-guide644/analyzercollectorcollaboration
QUESTION 78
Refer to the exhibit.
The exhibit shows "?remoteservergroup"? is an authentication server group with LDAP and RADIUS servers.
Which two statements express the significance of enabling "?Match all users on remote server"? when
configuring a new administrator? (Choose two.)
A. It creates a wildcard administrator using LDAP and RADIUS servers.
B. Administrator can log in to FortiAnalyzer using their credentials on remote servers LDAP and RADIUS.
C. Use remoteadmin from LDAP and RADIUS servers will be able to log in to FortiAnalyzer at anytime.
D. It allows administrators to use two-factor authentication.
Answer: A, B
Explanation:
Reference: https://docs.fortinet.com/document/fortimanager.0.1/administrationguide/
858351/creating-administrators
QUESTION 79
A rogue administrator was accessing FortiAnalyzer without permission, and you are tasked to see
what activity was performed by that rogue administrator on FortiAnalyzer.
What can you do on FortiAnalyzer to accomplish this?
A. Click FortiView and generate a report for that administrator.
B. Click Task Monitor and view the tasks performed by that administrator.
C. Click Log View and generate a report for that administrator.
D. View the tasks performed by the rogue administrator in Fabric View.
Answer: B
Explanation:
Reference: https://docs.fortinet.com/document/fortimanager.4.1/administrationguide/
792943/task-monitor
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 54: View the tasks FortiAnalyzer administrators
have performed, including progress and status.
QUESTION 80
The admin administrator is failing to register a FortiClient EMS on the FortiAnalyzer device.
What can be the reason for this failure?
A. FortiAnalyzer is in an HA cluster.
B. ADOM mode should be set to advanced, in order to register the FortiClient EMS device.
C. ADOMs are not enabled on FortiAnalyzer.
D. A separate license is required on FortiAnalyzer in order to register the FortiClient EMS device.
Answer: C
Explanation:
Reference: https://help.fortinet.com/fa/faz50hlp-6-2/FMGFAZ/
0800_ADOMs/0015_FortiClient%20and%20ADOMs.htm
QUESTION 81
Refer to the exhibit.
Which two statements are true regarding enabling auto-cache on FortiAnalyzer? (Choose two.)
A. Report size will be optimized to conserve disk space on FortiAnalyzer.
B. Reports will be cached in the memory.
C. This feature is automatically enabled for scheduled reports.
D. Enabling auto-cache reduces report generation time for reports that require a long time to
assemble datasets.
Answer: C, D
Explanation:
"Enable auto-cache in the report settings to boost the reporting performance and reduce report
generation time. Scheduled reports have auto-cache enabled already."
FortiAnalyzer_7.0_Study_Guide-Online page 306
QUESTION 82
Which two statements are true regarding high availability (HA) on FortiAnalyzer? (Choose two.)
A. FortiAnalyzer HA can function without VRRP. and VRRP is required only if you have more than two
FortiAnalyzer devices in a cluster.
B. FortiAnalyzer HA supports synchronization of logs as well as some system and configuration settings.
C. All devices in a FortiAnalyzer HA cluster must run in the same operation mode: analyzer or collector.
D. FortiAnalyzer HA implementation is supported by many public cloud infrastructures such as AWS,
Microsoft Azure, and Google Cloud.
Answer: BC
Explanation:
Reference: https://help.fortinet.com/fa/faz50hlp-0-2/Content/FMGFAZ/
4600_HA/0000_HA.htm?TocPath=High%20Availability%7C_____0
FortiAnalyzer HA implementation works only in networks where Virtual Router Redundancy Protocol
(VRRP) is permitted. Therefore it may not be supported by some public cloud infrastructures.
QUESTION 83
An administrator has moved FortiGate A from the root ADOM to ADOM1.
Which two statements are true regarding logs? (Choose two.)
A. Analytics logs will be moved to ADOM1 from the root ADOM automatically.
B. Archived logs will be moved to ADOM1 from the root ADOM automatically.
C. Logs will be presented in both ADOMs immediately after the move.
D. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL
database.
Answer: B, D
Explanation:
Reference: https://community.fortinet.com/t5/Fortinet-Forum/FW-Migration-between-ADOMs/mp/
32683?m=158008
QUESTION 84
Which two actions should an administrator take to view Compromised Hosts on FortiAnalyzer?
(Choose two.)
A. Enable web filtering in firewall policies on FortiGate devices, and make sure these logs are sent to FortiAnalyzer.
B. Make sure all endpoints are reachable by FortiAnalyzer.
C. Enable device detection on an interface on the FortiGate devices that are connected to the FortiAnalyzer device.
D. Subscribe FortiAnalyzer to FortiGuard to keep its local threat database up to date.
Answer: AD
Explanation:
In order to configure IOC, you require the following:
A one-year subscription to IOC. Note that FortiAnalyzer does include an evaluation license, but it is
restrictive and only meant to give you an idea of how the feature works.
A web filter services subscription on FortiGate device(s)
Web filter policies on FortiGate device(s) that send traffic to FortiAnalyzer
Compromised Hosts or Indicators of Compromise service (IOC) is a licensed feature.
To view Compromised Hosts, you must turn on the UTM web filter of FortiGate devices and subscribe
your FortiAnalyzer unit to FortiGuard to keep its local threat database synchronized with the
FortiGuard threat database. See Subscribing FortiAnalyzer to FortiGuard.
Ref : https://docs.fortinet.com/document/fortianalyzer.4.0/administration-guide635/viewingcompromised- hosts
QUESTION 85
In Log View, you can use the Chart Builder feature to build a dataset and chart based on the filtered
search results.
Similarly, which feature you can use for FortiView?
A. Export to Report Chart
B. Export to PDF
C. Export to Chart Builder
D. Export to Custom Chart
Answer: A
Explanation:
Reference: https://community.fortinet.com/t5/FortiAnalyzer/Creating-a-Custom-report-fromFortiView-Export-to-Report-Chart/ta-p154?externalID=FD40483
Similar to the Chart Builder feature in Log View, you can export a chart from a FortiView. The chart
export includes any filters you set on the FortiView. FortiAnalyzer_7.0_Study_Guide-Online pag. 292.
QUESTION 86
What can you do on FortiAnalyzer to restrict administrative access from specific locations?
A. Configure trusted hosts for that administrator.
B. Enable geo-location services on accessible interface.
C. Configure two-factor authentication with a remote RADIUS server.
D. Configure an ADOM for respective location.
Answer: A
Explanation:
Reference: https://docs.fortinet.com/document/fortigate.2.0/hardening-yourfortigate/
582009/system-administrator-best-practices
QUESTION 87
An administrator fortinet, is able to view logs and perform device management tasks, such as adding
and removing registered devices. However, administrator fortinet is not able to create a mall server
that can be used to send email.
What could be the problem?
A. Fortinet is assigned the Standard_ User administrator profile.
B. A trusted host is configured.
C. ADOM mode is configured with Advanced mode.
D. Fortinet is assigned the Restricted_ User administrator profile.
Answer: A
Explanation:
Super_User, which, like in FortiGate, provides access to all device and system privileges.
Standard_User, which provides read and write access to device privileges, but not system
privileges.
Restricted_User, which provides read access only to device privileges, but not system privileges.
Access
to the Management extensions is also removed.
No_Permissions_User, which provides no system or device privileges. Can be used, for example, to
temporarily remove access granted to existing admins.
FortiAnalyzer_7.0_Study_Guide-Online page 42
QUESTION 88
Which two statements express the advantages of grouping similar reports? (Choose two.)
A. Improve report completion time.
B. Conserve disk space on FortiAnalyzer by grouping multiple similar reports.
C. Reduce the number of hcache tables and improve auto-hcache completion time.
D. Provides a better summary of reports.
Answer: A, C
Explanation:
QUESTION 89
What are analytics logs on FortiAnalyzer?
A. Log type Traffic logs.
B. Logs that roll over when the log file reaches a specific size.
C. Logs that are indexed and stored in the SQL.
D. Raw logs that are compressed and saved to a log file.
Answer: C
Explanation:
QUESTION 90
What is Log Insert Lag Time on FortiAnalyzer?
A. The number of times in the logs where end users experienced slowness while accessing resources.
B. The amount of lag time that occurs when the administrator is rebuilding the ADOM database.
C. The amount of time that passes between the time a log was received and when it was indexed on
FortiAnalyzer.
D. The amount of time FortiAnalyzer takes to receive logs from a registered device
Answer: C
Explanation:
QUESTION 91
Refer to the exhibit.
What is the purpose of using the Chart Builder feature on FortiAnalyzer?
A. In Log View, this feature allows you to build a dataset and chart automatically, based on the
filtered search results.
B. In Log View, this feature allows you to build a chart and chart automatically, on the top 100 log
entries.
C. This feature allows you to build a chart under FortiView.
D. You can add charts to generated reports using this feature.
Answer: A
Explanation:
QUESTION 92
Which two statement are true regardless initial Logs sync and Log Data Sync for Ha on FortiAnalyzer?
A. By default, Log Data Sync is disabled on all backup devise.
B. Log Data Sync provides real-time log synchronization to all backup devices.
C. With initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its
logs with the backup device.
D. When Logs Data Sync is turned on, the backup device will reboot and then rebuilt the log database
with the synchronized logs.
Answer: C, D
Explanation:
QUESTION 93
Which two statements are true regarding fabric connectors? (Choose two.)
A. Configuring fabric connectors to send notification to ITSM platform upon incident creation Is more
efficient than third-party information from the FortiAnalyzer API.
B. Fabric connectors allow to save storage costs and improve redundancy.
C. Storage connector service does not require a separate license to send logs to cloud platform.
D. Cloud-Out connections allow you to send real-time logs to pubic cloud accounts like Amazon S3,
Azure Blob , and Google Cloud.
Answer: A, D
Explanation:
QUESTION 94
What does the disk status Degraded mean for RAID management?
A. One or more drives are missing from the FortiAnalyzer unit. The drive is no longer available to the
operating system.
B. The FortiAnalyzer device is writing to all the hard drives on the device in order to make the array
fault tolerant.
C. The FortiAnalyzer device is writing data to a newly added hard drive in order to restore the hard
drive to an optimal state.
D. The hard driveiIs no longer being used by the RAID controller
Answer: D
Explanation:
QUESTION 95
Which statement is true when you are upgrading the firmware on an HA cluster made up of two
FortiAnalyzer devices?
A. First, upgrade the secondary device, and then upgrade the primary device.
B. Both FortiAnalyzer devices will be upgraded at the same time.
C. You can enable uninterruptible-upgrade so that the normal FortiAnalyzer operations are not
interrupted while the cluster firmware upgrades.
D. You can perform the firmware upgrade using only a console connection.
Answer: A
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 64: To upgrade FortiAnalyzer HA cluster firmware:
1. Log in to each secondary device.
2. Upgrade the firmware of all secondary devices.
3. Wait for the upgrades to complete and verify that all secondary devices joined the cluster.
4. Verify that logs on all secondary devices are synchronized with the primary device.
5. Upgrade the primary device.
https://docs.fortinet.com/document/fortianalyzer.2.0/upgrade-guide607/upgradingfortianalyzer-firmware
QUESTION 96
What is the purpose of output variables?
A. To store playbook execution statistics
B. To use the output of the previous task as the input of the current task
C. To display details of the connectors used by a playbook
D. To save all the task settings when a playbook is exported
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 242: Output variables allow you to use the output
from a preceding task as an input to the current task.
"Output variables allow you to use the output from a preceding task as an input to the current task."
FortiAnalyzer_7.0_Study_Guide-Online page 242
QUESTION 97
Which two elements are contained in a system backup created on FortiAnalyzer? (Choose two.)
A. System information
B. Logs from registered devices
C. Report information
D. Database snapshot
Answer: AC
Explanation:
What does the System Configuration backup include?
System information, such as the device IP address and administrative user information.
Device list, such as any devices you configured to allow log access.
Report information, such as any configured report settings, as well as all your custom report details.
These are not the actual reports.
FortiAnalyzer_7.0_Study_Guide-Online pag. 29
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 29: What does the System Configuration backup
include?
System information, such as the device IP address and administrative user information
Device list, such as any devices you configured to allow log access
Report information, such as any configured report settings, as well as all your custom report details.
These are not the actual reports.
QUESTION 98
Which two statements are correct regarding the export and import of playbooks? (Choose two.)
A. You can export only one playbook at a time.
B. You can import a playbook even if there is another one with the same name in the destination.
C. Playbooks can be exported and imported only within the same FortiAnaryzer.
D. A playbook that was disabled when it was exported, will be disabled when it is imported.
Answer: B, D
Explanation:
If the imported playbook has the same name as an existing one, FortiAnalyzer will create a new
name that includes a timestamp to avoid conflicts.
Playbooks are imported with the same status they had (enabled or disabled) when they were
exported.
Playbooks set to run automatically should be exported while they are disabled to avoid unintended
runs on the destination.
QUESTION 99
Which SQL query is in the correct order to query the database in the FortiAnslyzer?
A. SELECT devid FROM Slog GROOP BY devid WHERE * user' =* USERl'
B. SELECT devid WHERE 'u3er'='USERl' FROM $ log GROUP BY devid
C. SELECT devid FROM Slog- WHERE *user' =' USERl' GROUP BY devid
D. FROM Slog WHERE 'user* =' USERl' SELECT devid GROUP BY devid
Answer: C
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 259: The main clauses FortiAnalyzer reports use are
as follows:
FROM
WHERE
GROUP BY
ORDER BY
LIMIT
OFFSET
Accordingly, following the SELECT keyword, the statement must be followed by one or more clauses
in the order in which they appear in the table shown on this slide.
QUESTION 100
Refer to the exhibits.
How many events will be added to the incident created after running this playbook?
A. Ten events will be added.
B. No events will be added.
C. Five events will be added.
D. Thirteen events will be added.
Answer: A
Explanation:
QUESTION 101
Which daemon is responsible for enforcing the log file size?
A. sqlplugind
B. logfiled
C. miglogd
D. ofrpd
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 121: The logfiled process enforces the log file size
and is also responsible for disk quota enforcement by monitoring the other processes.
QUESTION 102
Refer to the exhibit.
Which statement is correct regarding the event displayed?
A. The security risk was blocked or dropped.
B. The security event risk is considered open.
C. An incident was created from this event.
D. The risk source is isolated.
Answer: A
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more
actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 206
QUESTION 103
What is required to authorize a FortiGate on FortiAnalyzer using Fabric authorization?
A. A FortiGate ADOM
B. The FortiGate serial number
C. A pre-shared key
D. Valid FortiAnalyzer credentials
Answer: D
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 93: The fourth method uses the Fortinet Security
Fabric authorization process. This method requires that both FortiGate and FortiAnalyzer are running
version 7.0.1 or higher. It is also required that the FortiGate administrator has valid credentials to log
in on FortiAnalyzer and complete the registration.
https://docs.fortinet.com/document/fortianalyzer.2.1/administration-guide97/adding-afortigateusing-security-fabric-authorization
QUESTION 104
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
A)
B)
C)
D)
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Explanation:
QUESTION 105
Refer to the exhibit.
Laptopt is used by several administrators to manage FortiAnalyzer. You want to configure a generic
text filter that matches all login attempts to the web interface generated by any user other than
"admin" and coming from Laptop1:
Which filter will achieve the desired result?
A. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
B. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
C. operation-login & dstip==10.1.1.210 & userl-admin
D. operation-login & performed_on=="GUI(10.1.1.210)' & user!=admin
Answer: A
Explanation:
On there the task was to create a filter for failed logins from any other location but the local
computer: "Add the text performed_on!~10.0.1.10. This includes any attempts coming from devices
with an IP address that is not the one configured on the Local-Client computer."
QUESTION 106
If the primary FortiAnalyzer in an HA cluster fails, how is the new primary elected?
A. The configured IP address is checked first.
B. The active port number is checked first.
C. The firmware version is checked first.
D. The configured priority is checked first
Answer: D
Explanation:
In the case of a primary device failure, FortiAnalyzer HA uses the following rules to select a new
primary:
All cluster devices are assigned a priority from 80 to 120. The default priority is 100. If the primary
device
becomes unavailable, the device with the highest priority is selected as the new primary device. For
example, a device with a priority of 110 is selected over a device with a priority of 100.
If multiple devices have the same priority, the device whose primary IP address has the greatest
value is
selected as the new primary device. For example, 123.45.67.124 is selected over 123.45.67.123.
If a new device with a higher priority or a greater value IP address joins the cluster, the new device
does
not replace (or pre-empt) the current primary device automatically.
FortiAnalyzer_7.0_Study_Guide-Online page 62
QUESTION 107
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware
RAID?
A. Hot swap the disk.
B. There is no need to do anything because the disk will self-recover.
C. Run execute format disk to format and restart the FortiAnalyzer device.
D. Shut down FortiAnalyzer and replace the disk
Answer: A
Explanation:
https://help.fortinet.com/fa/faz50hlp-6-2/FMGFAZ/
0700_RAID/0800_Swapping%20Disks.htm#:~:text=If%20a%20hard%20disk%20on,to%20exchan
ging%20the%20hard%20disk.
QUESTION 108
Which statement is true about sending notifications with incident updates?
A. Notifications can be sent only when an incident is updated or deleted.
B. If you use multiple fabric connectors, all connectors must have the same notification settings
C. Notifications can be sent only by email.
D. You can send notifications to multiple external platforms
Answer: D
Explanation:
You can add more than one fabric connector, each with the same or different notification settings.
The receiving side of the connector must be configured for the notifications to be sent successfully.
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 34: Fabric connectors also enable FortiAnalyzer to
send notifications to ITSM platforms when a new incident is created or for any subsequent updates.
QUESTION 109
Which statement correctly describes the management extensions available on FortiAnalyzer?
A. Management extensions do not require additional licenses.
B. Management extensions allow FortiAnalyzer to act as a ForbSIEM supervisor.
C. Management extensions require a dedicated VM for best performance.
D. Management extensions may require a minimum number of CPU cores to run.
Answer: D
Explanation:
Events in FortiAnalyzer will be in one of four statuses. The current status will determine if more
actions need to be taken by the security team or not.
The possible statuses are:
Unhandled: The security event risk is not mitigated or contained, so it is considered open.
Contained: The risk source is isolated.
Mitigated: The security risk is mitigated by being blocked or dropped.
(Blank): Other scenarios.
FortiAnalyzer_7.0_Study_Guide-Online pag. 189.
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 189: Review the hardware requirements before you
enable a management extension application. Some of them require a minimum amount of memory
or a minimum number of CPU cores.
QUESTION 110
A play book contains five tasks in total. An administrator executed the playbook and four out of five
tasks finished successfully, but one task failed. What will be the status of the playbook after its
execution?
A. Success
B. Failed
C. Running
D. Upstream_failed
Answer: B
Explanation:
Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor.
FortiAnalyzer_7.0_Study Guide page No: 247
Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor. A
failed status, however, does not mean that all tasks failed. Some individual actions may have been
completed successfully.
QUESTION 111
When working with FortiAnalyzer reports, what is the purpose of a dataset?
A. To provide the layout used for reports
B. To define the chart type to be used
C. To retrieve data from the database
D. To set the data included in templates
Answer: C
Explanation:
Reference: https://docs2.fortinet.com/document/fortianalyzer.0.4/administrationguide/
148744/creating-datasets
Datasets: Structured Query Language (SQL) SELECT queries that extract specific data from the
database
QUESTION 112
Refer to the exhibit.
The image displays the configuration of a FortiAnalyzer the administrator wants to join to an existing
HA cluster.
What can you conclude from the configuration displayed?
A. This FortiAnalyzer will join to the existing HA cluster as the primary.
B. This FortiAnalyzer is configured to receive logs in its port1.
C. This FortiAnalyzer will trigger a failover after losing communication with its peers for 10 seconds.
D. After joining to the cluster, this FortiAnalyzer will keep an updated log database.
Answer: B
Explanation:
"If the preferred role is Primary, then this unit becomes the primary unit if it is configured first in a
new HA cluster. If there is an existing primary unit, then this unit becomes a secondary unit."
(https://docs.fortinet.com/document/fortianalyzer.0.5/administration-guide104)
QUESTION 113
You crested a playbook on FortiAnalyzer that uses a FortiOS connector
When configuring the FortiGate side, which type of trigger must be used so that the actions in an
automation stitch are available in the FortiOS connector?
A. FortiAnalyzer Event Handler
B. Incoming webhook
C. FortiOS Event Log
D. Fabric Connector event
Answer: B
Explanation:
"One possible scenario is shown on the slide:
1. Traffic flows through the FortiGate
2. FortiGate sends logs to FortiAnalyzer
3. FortiAnalyzer detects some suspicious traffic and generates an event
4. The event triggers the execution of a playbook in FortiAnalyzer, which sends a webhook call to
FortiGate so that it runs an automation stitch
5. FortiGate runs the automation stitch with the corrective or preventive actions"
FortiAnalyzer_7.0_Study_Guide-Online page 228
In order to see the actions related to the FOS connector, you must enable an automation rule using
the Incoming Webhook Call trigger on the FortiGate side. FortiAnalyzer_7.0_Study Guide page no
233
QUESTION 114
Which FortiAnalyzer feature allows you to use a proactive approach when managing your network
security?
A. Incidents dashboards
B. Threat hunting
C. FortiView Monitor
D. Outbreak alert services
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 217: Threat hunting consists in proactively
searching for suspicious or potentially risky network activity in your environment. The proactive
approach will help administrator find any threats that might have eluded detection by the current
security solutions or configurations.
QUESTION 115
What must you consider when using log fetching? (Choose two.)
A. The fetch client can retrieve logs from devices that are not added to its local Device Manager
B. You can use filters to include only logs from a single device.
C. The fetching profile must include a user with the Super_User profile.
D. The archive logs retrieved from the server become archive logs in the client.
Answer: B, C
Explanation:
QUESTION 116
Which two statements are true regarding the outbreak detection service? (Choose two.)
A. New alerts are received by email.
B. Outbreak alerts are available on the root ADOM only.
C. An additional license is required.
D. It automatically downloads new event handlers and reports.
Answer: C, D
Explanation:
QUESTION 117
What are two effects of enabling auto-cache in a FortiAnalyzer report? (Choose two.)
A. The size of newly generated reports is optimized to conserve disk space.
B. FortiAnalyzer local cache is used to store generated reports.
C. When new logs are received, the hard-cache data is updated automatically.
D. The generation time for reports is decreased.
Answer: C, D
Explanation:
QUESTION 118
Why must you wait for several minutes before you run a playbook that you just created?
A. FortiAnalyzer needs that time to parse the new playbook.
B. FortiAnalyzer needs that time to back up the current playbooks.
C. FortiAnalyzer needs that time to ensure there are no other playbooks running.
D. FortiAnalyzer needs that time to debug the new playbook.
Answer: A
Explanation:
QUESTION 119
Which statement describes online logs on FortiAnalyzer?
A. Logs that reached a specific size and were rolled over
B. Logs that can be used to create reports
C. Logs that can be viewed using Log Browse
D. Logs that are saved to disk, compressed, and available in FortiView
Answer: C
Explanation:
QUESTION 120
How can you attach a report to an incident?
A. By attaching it to an event handler alert
B. By editing the settings of the desired report
C. From the properties of an existing incident
D. Saving it in JSON format, and then importing it
Answer: C
Explanation:
QUESTION 121
Which item must you configure on FortiAnalyzer to email generated reports automatically?
A. Output profile
B. Report scheduling
C. SFTP server
D. SNMP server
Answer: A
Explanation:
QUESTION 122
Which statement about the FortiSOAR management extension is correct?
A. It requires a FortiManager configured to manage FortiGate
B. It requires a dedicated FortiSOAR device or VM.
C. It does not include a limited trial by default.
D. It runs as a docker container on FortiAnalyzer
Answer: D
Explanation:
QUESTION 123
Why run the command diagnose sql status sqlplugind?
A. To list the current SQL processes running
B. To check what is the database log insertion status
C. To display the SOL query connections and hcache status
D. To view the current hcache size
Answer: C
Explanation:
QUESTION 124
What are two benefits of using fabric connectors? (Choose two.)
A. They allow FortiAnalyzer to send logs in real-time to public cloud accounts.
B. You do not need an additional license to send logs to the cloud platform.
C. Fabric connectors allow you to improve redundancy.
D. Using fabric connectors is more efficient than using third-party polling with API.
Answer: A, C
Explanation:
QUESTION 125
Which log will generate an event with the status Contained?
A. An IPS log with action=pass.
B. A WebFilter log with action=dropped.
C. An AV log with action=quarantine.
D. An AppControl log with action=blocked.
Answer: C
Explanation:
QUESTION 126
Refer to the exhibit.
Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic
text filter that matches all login attempts to the web interface generated by any user other than
"admin", and coming from Laptop1.
Which filter will achieve the desired result?
A. operation-login & dstip==10.1.1.210 & user!-admin
B. operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin
C. operation-login & performed_on=="GUI(10.1.1.210)" & user!=admin
D. operation-login & performed_on=="GUI(10.1.1.100)" & user!=admin
Answer: D
Explanation:
QUESTION 127
After generating a report, you notice the information you were expecting to see is not included in it.
What are two possible reasons for this scenario? (Choose two.)
A. You enabled auto-cache with extended log filtering.
B. The logfiled service has not indexed all the expected logs.
C. The logs were overwritten by the data retention policy.
D. The time frame selected in the report is wrong.
Answer: B, C
Explanation:
QUESTION 128
What is the purpose of using prefilters when configuring event handlers?
A. They limit which logs are checked for matches by the other filters.
B. They can filter the logs before they are processed by FortiAnalyzer
C. They download new filters to be used in event handlers.
D. They are common filters applied simultaneously to all event handlers.
Answer: A
Explanation:
QUESTION 129
Which statement describes a dataset in FortiAnalyzer?
They determine what data is retrieved from the database.
They provide the layout used for reports.
They are used to set the data included in templates.
They define the chart types to be used in reports.
Answer: A
Explanation:
QUESTION 130
A playbook contains five tasks in total. An administrator runs the playbook and four out of five tasks
finish successfully, but one task fails. What will be the status of the playbook after it is run?
A. Running
B. Failed
C. Upstream_failed
D. Success
Answer: B
Explanation:
QUESTION 131
What is the purpose of trigger variables?
A. To display statistics about the playbook runtime
B. To use information from the trigger to filter the action in a task
C. To provide the trigger information to make the playbook start running
D. To store the start times of playbooks with On_Schedule triggers
Answer: B
Explanation:
QUESTION 132
Which statement about sending notifications with incident updates is true?
A. Notifications can be sent only when an incident is created or deleted.
B. You must configure an output profile to send notifications by email.
C. Each incident can send notifications to a single external platform.
D. Each connector used can have different notification settings.
Answer: D
Explanation:
QUESTION 133
Refer to the exhibit.
What is the purpose of using the Chart Builder feature on FortiAnalyzer?
A. To add a new chart under FortiView to be used in new reports
B. To build a dataset and chart automatically, based on the filtered search results
C. To add charts directly to generate reports in the current ADOM
D. To build a chart automatically based on the top 100 log entries
Answer: B
Explanation:
QUESTION 134
What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a
blocklisted IP address?
A. The endpoint is marked as Compromised and. optionally, can be put in quarantine.
B. FortiAnalyzer flags the associated host for further analysis.
C. A new Infected entry is added for the corresponding endpoint.
D. The detection engine classifies those logs as Suspicious
Answer: A
Explanation:
QUESTION 135
Refer to the exhibit.
Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
A. FortiAnalyzerl and FortiAnalyzer3
B. FortiAnalyzer1 and FortiAnalyzer2
C. All devices listed can be members
D. FortiAnalyzer2 and FortiAnalyzer3
Answer: C
Explanation:
QUESTION 136
Refer to the exhibit.
What does the data point at 12:20 indicate?
A. The performance of FortiAnalyzer is below the baseline.
B. FortiAnalyzer is using its cache to avoid dropping logs.
C. The log insert lag time is increasing.
D. The sqlplugind service is caught up with new logs.
Answer: C
Explanation:
QUESTION 137
Which statement about the FortiSIEM management extension is correct?
A. Allows you to manage the entire life cycle of a threat or breach.
B. Its use of the available disk space is capped at 50%.
C. It requires a licensed FortiSIEM supervisor.
D. It can be installed as a dedicated VM.
Answer: A
Explanation: