Lloyd’s Register Marine Working together for a safer world Thickness measurement and close-up survey guidance January 2023 Ver.7.6 Thickness Measurement And Close‐Up Survey Guidance Contents Part 1 Thickness Measurement Process Chapter 1 Introduction Chapter 2 Survey Planning Chapter 3 Preparation of Spaces Chapter 4 Thickness Measurement and Close-up Surveys Chapter 5 Permissible Diminution Chapter 6 Additional Assessments Chapter 7 TM Reporting Part 2 Special Survey Requirements: Other Ship Types & General Dry Cargo Ships Part 3 Special Survey Requirements: Bulk Carriers Part 4 Special Survey Requirements: Oil Tankers, Ore/Oil Ships, Ore/Bulk/Oil Ships Part 5 Special Survey Requirements: Chemical Tankers Part 6 Special Survey Requirements: Ships For Liquefied Gases Part 7 Annual And Intermediate Survey Requirements Part 8 Assessment Of Protective Coatings In Ballast Tanks : All Ships 2 Thickness Measurement And Close‐Up Survey Guidance Contents Appendix 1 Opening Meeting Form Appendix 2 Thickness Measurement Report Forms Appendix 3 Guidance On Thickness Measurement For Transverse Sections And The Evaluation Of Longitudinal Strength Of Hull Girders For All Ships (Including Oil Tankers Greater Than 130m In Length) Appendix 4 Guidance On Thickness Measurement Of Cargo Hold Shell Frames On Single Skin Bulk Carriers Contracted For Construction Prior To 1 July 1998 Appendix 5 Approval Of Thickness Measurement Companies Appendix 6 Guidance Notes For Evaluation Of Scantlings Of Corrugated Transverse Watertight Bulkheads In Bulk Carriers Contracted For Construction On Or After 1 July 1998 Appendix 7 Guidance Notes For Evaluation Of Scantlings Of Hatch Covers & Hatch Coamings Of Cargo Holds Of Bulk Carriers Contracted For Construction On Or After 1 July 1998 & Bulk Carriers, Ore Carriers And Combination Carriers Contracted For Construction On Or After 1 January 2004. Also All Remaining Ships Contracted For Construction On Or After 1 July 2012. Appendix 8 Guidelines For The Gauging / Renewal / Reinforcement Of The Vertically Corrugated Transverse Watertight Bulkhead Between Holds Nos. 1 And 2 In Accordance To UR S19. Appendix 9 CAP TM Jobs Argonaut User Guide Appendix 10 Residual Deck Buckling in Argonaut Appendix 11 Requirements for Service Suppliers Engaged in Surveys using Remote Inspection Techniques (RIT) as an Alternative Means for Close-up Survey of the Structure of Ships and Mobile Offshore Units 3 Lloyd’s Register Marine For further information, contact your local Lloyd’s Register group office. For all other Thickness Measurement guidance and information about our services go to: www.lr.org/tm www.lr.org Lloyd’s Register and variants of it are trading names of Lloyd’s Register Group Limited, its subsidiaries and affiliates. Lloyd’s Register Group Limited (Reg. no.08126909) is a limited company registered in England and Wales. Registered office: 71 Fenchurch Street, London, EC3M 4BS, UK. A member of the Lloyd’s Register group. Lloyd’s Register Group Limited , its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as the ‘Lloyd’s Register Group’. The Lloyd’s Register Group assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd’s Register Group entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.