RX-V371/HTR-3064
Power Amplifier IC Replacement
PURPOSE:
New power amp IC has been applied in the middle of production due to stock shortage
of the original power amp IC. However, this new power amp IC doesn’t have full
compatibility with the original power amp IC. It requires PCB modification. The
location for this modification is described in the following page. Use the following
flow chart to determine what should be done.
Check the type of POWER AMP IC
Letter “ N ”
Replace with same POWER AMP IC
IC1: YD936A00
IC2: YD935A00
Letter “ F ”
Modify MAIN PCB and apply the
new POWER AMP IC. Follow the
procedures on the next page.
PROCEDURE: 1. Order the following parts
<To Replace IC1>
Ref No.
Part No.
IC1
YD936A00
Description
IC ANALOG AMP STK433-330N-E
<To Replace IC2>
Ref No.
Part No.
IC2
YD935A00
Description
IC STK433-130N-E
2. Modify the PCB for new POWER AMP IC
Remove the devices as described below.
<To Replace IC1>
Remove C18, C23 and C28 capacitors
C28
C23
C18
IC1
3. Replace POWER AMP IC
SERVICING:
Apply when replacing the power amp IC.
<To Replace IC2>
Remove C20 and C25 capacitors
C25
C20
IC2
AV RECEIVER
RX-V371/HTR-3064
SERVICE MANUAL
When the following parts are replaced, the model name and the destination MUST be written to the back-up IC
(EEPROM: IC222 on DIGITAL P.C.B.) to have proper operation. (See No. 22 SOFT SWITCH menu of the selfdiagnostic function.)
•
•
DIGITAL P.C.B.
EEPROM: IC222 on DIGITAL P.C.B.
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
■ CONTENTS
TO SERVICE PERSONNEL ............................................2
FRONT PANELS .........................................................3–4
REAR PANELS ...........................................................5–9
REMOTE CONTROL PANELS ..................................... 10
SPECIFICATIONS ................................................... 11–15
INTERNAL VIEW .......................................................... 16
SERVICE PRECAUTIONS ............................................ 16
DISASSEMBLY PROCEDURES ............................. 17–19
UPDATING FIRMWARE ..........................................20–22
SELF-DIAGNOSTIC FUNCTION ...........................23–46
101206
DISPLAY DATA .......................................................47–48
IC DATA ...................................................................49–60
BLOCK DIAGRAM ........................................................61
PRINTED CIRCUIT BOARDS .................................62–75
PIN CONNECTION DIAGRAMS ................................... 76
SCHEMATIC DIAGRAMS .......................................77–85
REPLACEMENT PARTS LIST ................................87–95
REMOTE CONTROL ............................................. 96–100
ADVANCED SETUP ............................................ 101–102
Copyright © 2011
All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
P.O.Bo
, Hamamatsu, apan
'11.02
RX-V371/HTR-3064
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
RX-V371/HTR-3064
■ TO SERVICE PERSONNEL
WALL
OUTLET
1. Critical Components Information
Components having special characteristics are marked ⚠ and
must be replaced with parts having specifications equal to those
originally installed.
2. Leakage Current Measurement (For 120V Models Only)
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.
• Meter impedance should be equivalent to 1500 ohms shunted
by 0.15 μF.
EQUIPMENT
UNDER TEST
AC LEAKAGE
TESTER OR
EQUIVALENT
INSULATING
TABLE
• Leakage current must not exceed 0.5mA.
• Be sure to test for leakage with the AC plug in both polarities.
For U model
“CAUTION”
“F1501: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 6A,
125V FUSE.”
For C model
CAUTION
F1501: REPLACE WITH SAME TYPE 6A, 125V FUSE.
ATTENTION
F1501: UTILISER UN FUSIBLE DE RECHANGE DE MÉME TYPE DE 6A, 125V.
WARNING: CHEMICAL CONTENT NOTICE!
RX-V371/HTR-3064
This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive
harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON
WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or
expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.
About lead free solder
All of the P.C.B.s installed in this unit and solder joints are soldered using the lead free solder.
Among some types of lead free solder currently available, it is recommended to use one of the following types for the
repair work.
• Sn + Ag + Cu (tin + silver + copper)
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
As the melting point temperature of the lead free solder is about 30°C to 40°C (50°F to 70°F) higher than that of the lead
solder, be sure to use a soldering iron suitable to each solder.
2
RX-V371/HTR-3064
■ FRONT PANELS
Top view
RX-V371 / HTR-3064
Front view
RX-V371 (U, C, T models)
RX-V371/HTR-3064
RX-V371 (R, K, A, B, G, F, L, S models)
3
RX-V371/HTR-3064
HTR-3064 (U, C, T models)
RX-V371/HTR-3064
HTR-3064 (R, K, A, G, F, L, S models)
4
RX-V371/HTR-3064
■ REAR PANELS
RX-V371 (U, C models)
RX-V371 (R, S models)
RX-V371/HTR-3064
RX-V371 (T model)
5
RX-V371/HTR-3064
RX-V371 (K model)
RX-V371/HTR-3064
RX-V371 (A model)
RX-V371 (B, G, F models)
6
RX-V371/HTR-3064
RX-V371 (L model)
HTR-3064 (U, C models)
RX-V371/HTR-3064
HTR-3064 (R, S models)
7
RX-V371/HTR-3064
HTR-3064 (T model)
RX-V371/HTR-3064
HTR-3064 (K model)
HTR-3064 (A model)
8
RX-V371/HTR-3064
HTR-3064 (G, F models)
HTR-3064 (L model)
RX-V371/HTR-3064
9
RX-V371/HTR-3064
■ REMOTE CONTROL PANELS
RAV331
(U, C, R, K, A, L, S models)
RAV332
(T model)
RAV433
(B, G, F models)
RX-V371/HTR-3064
RCU sheet
(T model)
10
RX-V371/HTR-3064
■ SPECIFICATIONS
■ Audio Section
Rated Output Power (1 channel driven)
(1 kHz, 0.9 % THD)
U, C models (8 ohms)
FRONT L/R .......................................................... 100 W/ch
CENTER ................................................................... 100 W
SURROUND L/R ................................................. 100 W/ch
R, T, K, A, B, G, F, L, S models (6 ohms)
FRONT L/R .......................................................... 100 W/ch
CENTER ................................................................... 100 W
SURROUND L/R ................................................. 100 W/ch
Rated Output Power (2 channel driven)
(1 kHz, 0.9 % THD)
U, C models (8 ohms)
FRONT L/R .....................................................80 W + 80 W
CENTER ..................................................................... 80 W
SURROUND L/R ............................................80 W + 80 W
Maximum Effective Output Power (1 channel driven, JEITA)
(1 kHz, 10 % THD, 6 ohms)
R, T, K, L, S models
FRONT L/R ............................................................ 135 W/ch
CENTER ..................................................................... 135 W
SURROUND L/R .................................................... 135 W/ch
Dynamic Power Per Channel (IHF) (1 channel driven)
U, C models
8/6/4/2 ohms ....................................... 110/130/160/180 W
Dynamic Headroom
U, C models (8 ohms) ..............................................0.23 dB
Input Sensitivity/Input Impedance
AV5, etc. ............................................... 200 mV / 47 k-ohms
Maximum Input Signal (1 kHz, 0.5 % THD, Effect on)
AV5, etc. ....................................................................... 2.3 V
Output Level/Output Impedance
AUDIO OUT (REC) .............................. 200 mV / 1.2 k-ohms
SUBWOOFER (2 ch STEREO and FRONT speaker: Small)
................................................................. 1 V / 1.2 k-ohms
Headphone Jack Rated Output/Impedance
AV5, etc. (1 kHz, 50 mV, 8 ohms) .......... 100 mV / 470 ohms
Frequency Response (10 Hz to 100 kHz)
AV5, etc. to FRONT L/R ........................................0 / -3.0 dB
Total Harmonic Distortion (1 kHz, 50 W)
AV5, etc. (straight) to FRONT L/R speaker out
U, C models
(8 ohms) ....................................................0.06 % or less
R, T, K, A, B, G, F, L, S models
(6 ohms) .....................................................0.06 % or less
Signal to Noise Ratio (IHF-A Network)
AV5, etc. (STEREO) (Input shorted) to speaker out
250 mV ........................................................ 98 dB or more
Residual Noise (IHF-A Network)
FRONT L/R speaker out ..................................150 μV or less
Channel Separation
AV5, etc. (Input 5.1 k-ohms shorted, 1 kHz / 10 kHz)
.......................................... 60 dB or more / 45 dB or more
Tone Control Characteristics
* FRONT L/R channel only
BASS
Boost/Cut ................................ ±10 dB / 2 dB step / 50 Hz
Turnover frequency ................................................. 350 Hz
TREBLE
Boost/Cut ...............................±10 dB / 2 dB step / 20 kHz
Turnover frequency ................................................ 3.5 kHz
Filter Characteristics
FRONT, CENTER, SURROUND (H.P.F.)
........ fc=40/60/80/90/100/110/120/160/200 Hz, 12 dB/oct.
SUBWOOFER (L.P.F.)
........ fc=40/60/80/90/100/110/120/160/200 Hz, 24 dB/oct.
■ Video Section
Composite Video Signal Level
..................................................................1 Vp-p / 75 ohms
Component Signal Level
Y ................................................................1 Vp-p / 75 ohms
PB/PR ......................................................0.7 Vp-p / 75 ohms
Video Maximum Input Level (Video Conversion Off)
.................................................................................1.5 Vp-p
Signal to Noise Ratio (IHF)
...................................................................... 50 dB or more
RX-V371/HTR-3064
R, T, K, A, B, G, F, L, S models
6/4/2 ohms ................................................. 105/130/150 W
Volume Control
............................ MUTE / -80 dB to +16.5 dB / 0.5 dB step
Monitor Out Frequency Response
Component video signal ..................5 Hz to 60 MHz, ±3 dB
■ FM Section
Tuning Range
U, C models ............................................ 87.5 to 107.9 MHz
R, L, S models ............. 87.5 to 108.0 / 87.50 to 108.00 MHz
T, K, A, B, G, F models ........................ 87.50 to 108.00 MHz
50 dB Quieting Sensitivity (IHF) (1 kHz, 100 % Mod.)
Mono ............................................................ 3 μV (20.8 dBf)
Signal to Noise Ratio (IHF)
Mono ...........................................................................74 dB
Stereo ..........................................................................69 dB
Harmonic Distortion (1 kHz)
Mono ........................................................................... 0.3 %
Stereo .......................................................................... 0.3 %
Antenna Input
............................................................ 75 ohms unbalanced
■ AM Section
Tuning Range
U, C models .............................................. 530 to 1,710 kHz
R, L, S models .................... 530 to 1,710 / 531 to 1,611 kHz
T, K, A, B, G, F models .............................. 531 to 1,611 kHz
Antenna Input
........................................................................ Loop antenna
11
RX-V371/HTR-3064
■ General
Power Supply
U, C models ............................................... AC 120 V, 60 Hz
R, S model ........................AC 110-120/220-240 V, 50/60 Hz
T model ...................................................... AC 220 V, 50 Hz
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic
and the double-D symbol are trademarks of Dolby Laboratories.
K model ...................................................... AC 220 V, 60 Hz
A model ...................................................... AC 240 V, 50 Hz
B, G, F models ........................................... AC 230 V, 50 Hz
DTS, DTS-HD and the Symbol are registered trademarks, & DTS-HD Master
Audio, and the DTS logos are trademarks of DTS, Inc.
L model .......................................... AC 220-240 V, 50/60 Hz
Power Consumption
U, C models .................................................250 W / 320 VA
“iPod” is a trademark of Apple Inc., registered in the U.S. and other countries.
“iPhone” is a trademark of Apple Inc.
R, T, K, A, B, G, F, L, S models ................................... 250 W
Standby Power Consumption
U, C, T, K, A, B, G, F models ............................0.5 W or less
Bluetooth is a registered trademark of the Bluetooth SIG and is used by
Yamaha in accordance with a license agreement.
R, S model ........................................................1.0 W or less
Maximum Power Consumption
................................................................................... 440 W
“HDMI”, the “HDMI” logo and “High-Definition Multimedia Interface” are
trademarks, or registered trademarks of HDMI Licensing LLC.
Dimensions (W x H x D)
........................ 435 x 151 x 315 mm (17-1/8" x 6" x 12-3/8")
Weight ......................................................... 7.5 kg (16.5 lbs.)
“SILENT CINEMA” is a trademark of Yamaha Corporation.
Finish
Batteries (R03, AAA, UM-4) ...............................................x 2
Indoor FM antenna (1.4 m) ...............................................x 1
23
(1-3/4")
(7/8")
315 (12-3/8")
Remote control .................................................................x 1
ø 60
Top view
274 (10-3/4")
Accessories
46
[HTR-3064]
T model ..............................................................Gold color
U, C, R, T, K, A, G, F, L, S models ................... Black color
R, G models ......................................................Silver color
• DIMENSIONS
170 (6-5/8")
RX-V371/HTR-3064
[RX-V371]
T model ..............................................................Gold color
U, C, R, T, K, A, B, G, F, L, S models ............... Black color
R, B, G, F, L, S models .................................Titanium color
G, F models ......................................................Silver color
AM loop antenna (1.0 m) ..................................................x 1
(3/4")
18
B .......................British model
G ..................European model
F..................... Russian model
L..................Singapore model
S ...................Brazirian model
435 (17-1/8")
151 (6")
Front view
130 (5-1/8")
U ........................U.S.A. model
C ..................Canadian model
R .....................General model
T..................... Chinese model
K ...................... Korean model
A .................Australian model
335 (13-1/4")
21
* Specifications are subject to change without notice.
50
(2")
(7/8")
RCU sheet (T model) .......................................................x 1
58
VIDEO AUX input cover ...................................................x 1
(2-1/4")
YPAO microphone (6.0 m) (R, K, A, B, G, F, L, S models) ...x 1
Unit: mm (inch)
12
RX-V371/HTR-3064
• SELECT MENU
MUSIC
STEREO
MUSIC ENHANCER
SUR. DECODE
Initialize
Center Image: 0.0 to 1.0, [0.3]
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
● ● ●
●
Dimension: -3 to +3, [0]
●
●
●
*1
Center Width: 0 to 7, [3]
Panorama: On/Off
Effect Level: High/Low
Direct: Auto/Off
Surround R Level: 0 to 100%
Surround L Level: 0 to 100%
Center Level: 0 to 100%
●
*1 Decode Type
●
●
●
●
●
Decode Type
△
STRAIGHT
●
Dolby Pro Logic
Dolby PL II Movie
Dolby PL II Music
Dolby PL II Game
Neo:6 Cinema
Neo:6 Music
RX-V371/HTR-3064
SUR. DECODE
Program
Standard
Spectacle
Sci-Fi
Adventure
Drama
Mono Movie
Sports
Action Game
Roleplaying Game
Hall in Munich
Hall in Vienna
Chamber
Cellar Club
The Roxy Theatre
The Bottom Line
Music Video
2ch Stereo
5ch Stereo
Straight Enhancer
5ch Enhancer
DSP Level: -6dB to +3dB
Parameter
Category
MOVIE
Decode Type
Sound field parameters
△ : Setting is possible only when Pro Logic II Music is selected using decode type.
13
RX-V371/HTR-3064
• SET MENU TABLE
MAIN MENU
1 Speaker Setup
SUB-MENU
1 Config
2 Level
3 Distance
PARAMETER
Subwoofer
Front speaker
Center speaker
Surround speaker L/R
Crossover
Subwoofer Phase
Extra Bass
FL (Front speaker L)
FR (Front speaker R)
C (Center speaker)
SL (Surround speaker L)
SR (Surround speaker R)
SWFR (Subwoofer)
[Yes] / None
[Small] / Large
None / [Small] / Large
40 / 60 / [80] / 90 / 100 / 110 / 120 / 160 / 200 Hz
[NRM] / REV
On / [Off]
-10.0 to +10.0 dB, [0 dB], 0.5 dB step
-10.0 to +10.0 dB, [-1.0 dB], 0.5 dB step
-10.0 to +10.0 dB, [0 dB], 0.5 dB step
U, C models: meters (m) / [feet (ft)]
R, T, K, A, B, G, F, L, S models: [meters (m)] / feet (ft)
0.30 to 24.00 m, [3.00 m], 0.1 m step
1.0 to 80.0 ft, [10.0 ft], 0.5 ft step
0.30 to 24.00 m, [2.60 m], 0.1 m step
1.0 to 80.0 ft, [8.5 ft], 0.5 ft step
0.30 to 24.00 m, [2.40 m], 0.1 m step
1.0 to 80.0 ft, [8.0 ft], 0.5 ft step
0.30 to 24.00 m, [3.00 m], 0.1 m step
1.0 to 80.0 ft, [10.0 ft], 0.5 ft step
[GEQ] / Off
* “GEQ” is available only when “EQ Type Select” is set
to “GEQ”.
Unit
Front L
Front R
Center
Sur. L
Sur. R
SWFR
4 Equalizer
EQ Type Select
GEQ
RX-V371/HTR-3064
Front L 63 Hz
Front R 160 Hz
Center 400 Hz
Sur. L
1 kHz
Sur. R 2.5 kHz
6.3 kHz
16 kHz
5 Test Tone
VALUE [INITIAL VALUE]
···········||···········
···········||···········
···········||···········
···········||···········
···········||···········
···········||···········
···········||···········
0 dB
0 dB
0 dB
0 dB -6.0 to +6.0 dB, [0 dB], 0.5 dB step
0 dB
0 dB
0 dB
[Off] / On
2 Sound Setup
1 Lipsync
5 Init. Volume
Off / [On]
0 to 240 ms, 1 ms step
0 to 240 ms, [0 ms], 1 ms step
On / [Off]
[Max], Min / Auto, Std
-30.0 to +15.0 dB / +16.5 dB (Maximum volume), [+16.5
dB], 5.0 dB step
Off, Mute, -80 dB to +16.5 dB [Off], 0.5 dB step
1
2
3
4
[Off] / On
AV1 / AV2 / AV3 / [AV4] / AV5 / AUDIO1 / AUDIO2
Off / [On]
[Amp] / TV / Amp+TV
2 Adaptive DRC
3 D.Range
4 Max Volume
HDMI Auto
Auto
Manual
3 HDMI Setup
Control
TV Audio
ARC
Audio
4 Function Setup
1 Input Rename
2 Auto Power Down
3 Dimmer
14
Input is possible to 9 characters
Input possible Character type
Capital
: A to Z
Small
: a to z
Figure
: 0 to 9
Symbols
: # * + , - etc.
Space
U, C, R, T, K, A, L, S models: [Off] / 4 hours / 8 hours / 12 hours
B, G, F models: Off / 4 hours / [8 hours] / 12 hours
-4 to 0, [0]
RX-V371/HTR-3064
MAIN MENU
5 DSP Parameter
SUB-MENU
MOVIE Standard
Spectacle
Sci-Fi
Adventure
Drama
Mono Movie
Sports
Action Game
Roleplaying Game
MUSIC Hall in Munich
Hall in Vienna
Chamber
Cellar Club
The Roxy Theatre
The Bottom Line
Music Video
STEREO 2ch Stereo
5ch Stereo
MUSIC ENHANCER Straight Enhancer
5ch Enhancer
SUR. DECODE SUR. DECODE
STRAIGHT
VALUE [INITIAL VALUE]
[2], [12]
[2], [12]
[6], [12]
[3], [4], [5], [12]
[7], [12]
[7], [12]
[1], [8], [12]
[1]
Decode Type
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
DSP Level
Center Level
Surround L Level
Surround R Level
Direct
Effect Level
Panorama
Center Width
Dimension
Center Image
Initialize
Dolby Pro Logic, Dolby PL II Movie, Dolby PL II Music,
Dolby PL II Game, Neo:6 Cinema, Neo:6 Music
-6 to +3 dB, [0 dB]
0 to 100 %, [100 %]
[Auto] / Off
[High] / Low
[Off] / On
0 to 7, [3]
-3 to +3, [0]
0.0 to 1.0, [0.3]
RX-V371/HTR-3064
6 Memory Guard
PARAMETER
[Off] / On
15
RX-V371/HTR-3064
■ INTERNAL VIEW
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
12
11
RX-V371/HTR-3064
13
10
14
9
OPERATION (3) P.C.B.
MAIN (3) P.C.B. (R, S models)
MAIN (1) P.C.B.
AM/FM TUNER
DIGITAL P.C.B.
MAIN (2) P.C.B.
OPERATION (4) P.C.B.
MAIN (4) P.C.B.
OPERATION (9) P.C.B.
OPERATION (2) P.C.B.
OPERATION (8) P.C.B.
POWER TRANSFORMER
OPERATION (7) P.C.B.
OPERATION (1) P.C.B.
OPERATION (6) P.C.B.
OPERATION (5) P.C.B.
8
15
16
■ SERVICE PRECAUTIONS
Safety measures
•
Some internal parts in this product contain high voltages and are dangerous.
Be sure to take safety measures during servicing, such as wearing insulating gloves.
•
Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge
remains and a high voltage continues to exist there.
Before starting any repair work, connect a discharging resistor (5 k-ohms/10 W) to the terminals of each capacitor
indicated below to discharge electricity.
The time required for discharging is about 30 seconds per each.
C1317–1320 on OPERATION (2) P.C.B.
C46, C47 on MAIN (1) P.C.B.
For details, refer to “PRINTED CIRCUIT BOARDS”.
16
RX-V371/HTR-3064
■ DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Top Cover
a. Remove 5 screws (①) and 4 screws (②). (Fig. 1)
b. Slide the top cover rearward to remove it. (Fig. 1)
2. Removal of Front Panel Unit
a.
b.
c.
d.
Remove 7 screws (③). (Fig. 1)
Remove CB166, CB193 and CB221. (Fig. 1)
Unlock and remove CB136. (Fig. 1)
Release hook, and remove the front panel unit. (Fig. 1)
Top cover
Remove CB136 and CB262
① Unlock the connector
② Remove the cable
Connected
①
①
①
②
②
Cable
Connect CB136 and CB262
①
RX-V371/HTR-3064
① Lock the connector
② Insert the cable
Connected
①
②
CB136
②
Cable
CB221
Front panel unit
CB166
③
CB193
③
Hook
③
Fig. 1
17
RX-V371/HTR-3064
3. Removal of DIGITAL P.C.B.
a.
b.
c.
d.
Remove CB222 and CB223, unlock and remove CB262. (Fig. 2)
Remove screw (④). (Fig. 2)
Remove 2 screws (U, C, R, K, A, B, G, F, L, S models)/screw (T model) (⑤) and 5 screws (⑥). (Fig. 3)
Remove the DIGITAL P.C.B. which is connected directly to the OPERATION (4) P.C.B. with board-to-board connectors.
(Fig. 2)
4. Removal of OPERATION (4) P.C.B.
a. Remove CB194. (Fig. 2)
b. Remove screw (⑦) and screw (⑧). (Fig. 3)
c. Remove the OPERATION (4) P.C.B. which is connected directly to the MAIN (1) P.C.B. with board-to-board connectors.
(Fig. 2)
CB223
CB222
DIGITAL P.C.B.
OPERATION (4) P.C.B.
DIGITAL P.C.B.
CB263
CB262
CB264
Board-to-board
connectors
CB196
CB194
CB191
④
RX-V371/HTR-3064
MAIN (2) P.C.B.
OPERATION (4) P.C.B.
CB192
⑧
CB22
MAIN (1) P.C.B.
Fig. 2
⑤ (U, C, R, K, A,
B, G, F, L, S models)
⑥
⑤
⑦
⑨
Fig. 3
18
CB195
CB21
Board-to-board
connectors
RX-V371/HTR-3064
When checking the DIGITAL P.C.B.
•
•
•
•
Put the rubber sheet and cloth over this unit, and place the DIGITAL P.C.B. on them. (Fig. 4)
Connect ST201 on DIGITAL P.C.B. to the chassis with a ground lead or the like. (Fig. 4)
Reconnect all cables (connectors) that have been disconnected. Be sure to use the P.C.B. CHECKING JIG (Part No.
WW483800) to connect between the following connectors.
CB263 on DIGITAL P.C.B. – CB196 on OPERATION (4) P.C.B.
CB264 on DIGITAL P.C.B. – CB195 on OPERATION (4) P.C.B.
When connecting the flexible flat cable, be careful with polarity.
DIGITAL P.C.B.
CB263
CB264
P.C.B. CHECKING JIG
OPERATION (4) P.C.B.
Rubber sheet and cloth
CB196
CB195
ST201
Ground lead
Chassis
RX-V371/HTR-3064
Fig. 4
When checking the MAIN (1) P.C.B.
a.
b.
c.
d.
e.
Remove the top cover. (Fig. 1)
Remove 3 screws (⑨). (Fig. 3)
Remove 5 screws (⑩) and 4 screws (⑪). (Fig. 5)
Place the P.C.B.s (with rear panel) upright. (Fig. 6)
Connect the heatsink, rear panel and MAIN (1) P.C.B. (G3) to the chassis with a ground lead or the like. (Fig. 6)
Rear panel
⑩
Ground lead
⑪
G3
Chassis
⑩
⑩
MAIN (1) P.C.B.
Ground lead
Heatsink
Fig. 5
Fig. 6
19
RX-V371/HTR-3064
■ UPDATING FIRMWARE
When the following parts are replaced, the firmware must be updated to the latest version.
DIGITAL P.C.B.
IC243 on DIGITAL P.C.B.
● Confirmation of firmware version and checksum
Before and after updating the firmware, check the firmware version and checksum by using the self-diagnostic
function menu.
Start up the self-diagnostic function and select “25. ROM VER/SUM/PORT” menu.
Using the sub-menu, have the firmware version and checksum displayed, and note them down.
(See “SELF-DIAGNOSTIC FUNCTION”)
*
When the firmware version is different from written one after updating, perform the updating procedure again from
the beginning.
● Initializing the back-up IC (EEPROM: IC222 on DIGITAL P.C.B.)
After updating the firmware, the back-up IC MUST be initialized by the following procedure to have proper
memorization of the set up information (soundfield parameters, system memory and tuner presetting, etc.).
Start up the self-diagnostic function and select “24. FACTORY PRESET” menu. (See “SELF-DIAGNOSTIC FUNCTION”)
RX-V371/HTR-3064
Select “24. PRESET RSRV”, press the “ ” (Power) key to turn off the power once and turn on the power again. Then
the back-up IC is initialized.
● Required Tools
•
BD, DVD or CD player (with DIGITAL OUTPUT (OPTICAL or COAXIAL) jack)
•
Optical cable (when OPTICAL jack is used)
•
Digital audio pin cable (when COAXIAL jack is used)
•
Firmware CD
*
20
Download the latest firmware from the specified download source and create the firmware CD.
RX-V371/HTR-3064
● Connection
Connect this unit and BD/DVD/CD player as shown below. (Fig. 1)
Example of connection between digital OPTICAL jacks
This unit
BD/DVD/CD player
Optical cable
Example of connection between digital COAXIAL jacks
This unit
BD/DVD/CD player
RX-V371/HTR-3064
Digital audio pin cable
Fig. 1
21
RX-V371/HTR-3064
● Operation Procedures
1. While pressing the “INFO” key, connect the power cable to the AC outlet. (Fig. 2)
The FIRMWARE UPDATE mode is activated and “CDDA Upgrader” is displayed. (Fig. 2)
"INFO" key
Display
CDDA Upgrader
Fig. 2
2. Play the firmware CD on the BD/DVD/CD player. Writing of the firmware starts automatically. (Fig. 3)
3. When writing of the firmware is completed, “Update Success”, “Please...” and “Power off!!” are displayed
repeatedly. (Fig. 3)
RX-V371/HTR-3064
Writing is started
XXXXXX
Writing is completed
XX XX
Update Success
X X X X X X : Received data
Please...
Power off!!
Fig. 3
*
If the display remains unchanged for more than 10 seconds after starting the firmware CD play procedure,
perform the firmware CD play procedure again from the beginning.
If “FILE CORRUPTED” is displayed after “Address:XXXXXX”, make sure that the written data is not corrupted
and perform Steps 1 to 7 of “Operation Procedures” again.
If “Upgrade Failed” is displayed, perform “operation procedures” again from the beginning.
4. Press the “ ” (Power) key to turn off the power.
5. Eject the firmware CD from the BD/DVD/CD player.
6. Start up the self-diagnostic function and check that the firmware version and checksum are the same as written
ones. (See “Confirmation of firmware version and checksum”)
22
RX-V371/HTR-3064
■ SELF-DIAGNOSTIC FUNCTION
This unit has self-diagnostic functions that are intended for inspection, measurement and location of faulty point.
There are 26 main menu items, each of which has sub-menu items.
Listed in the table below are main menu items and sub-menu items.
Note that not all menu items listed will apply to the models covered in this service manual.
No.
Main menu
Sub-menu
1
BYPASS
1 ANALOG BYPASS
2
RAM THROUGH
1 RAM MARGIN
2 RAM FULL ALL
3 RAM FULL CENTER
4 RAM FULL SURROUND
5 RAM FULL SURROUND BACK (Not for service)
3
HDMI AUDIO
1 SPDIF
2 Multi
3 DSD
4 ARC
4
SPEAKERS SET
1 FRONT: SML 0dB
2 CENTER: NONE
3 LFE/BASS: FRNT
4 TONE: MAX
5 TONE: MIN
6 SPEAKER 6-ohms (Not for service)
LIMITER CONTROL (Not for service)
RX-V371/HTR-3064
5
1 AC_B: Hi
2 AC_B: Lo
3 LIM/PLDET/THM
6
MIC CHECK (R, K, A, B, G, F, L, S models)
1 MIC CHECK
7
FL/MONITOR CHECK
1 INITIAL DISPLAY
2 ALL SEGMENT OFF/MONITOR (VIDEO) MUTE
3 ALL SEGMENT ON/MONITOR (COMPONENT) MUTE
4 DIMMER 50%
5 CHECK PATTERN
8
MANUAL TEST
1 TEST ALL
9
AD DATA CHECK
1 PS/DC
2 TH1/TH2
3 AMP/DK
4 K1/K2
10
VIDEO CHECK
1 I2C
2 DIGITAL COMPONENT (Not for service)
3 DIGITAL CVBS (Not for service)
4 DIGITAL Y/C (Not for service)
5 ANALOG BYPASS (Not for service)
11
NO MENU
Invalidity
12
NO MENU
Invalidity
13
NO MENU
Invalidity
23
RX-V371/HTR-3064
No.
14
15
Main menu
Sub-menu
DOCK
1 DOCK
(U, C, R, K, A, B, G, F, L, S models)
2 BT VERSION (Not for service)
HDMI INFORMATION
1 MODEL NAME
2 PRODUCT ID
3 VENDOR NAME
16
HDMI SELECT
1 HDMI NONE
2 HDMI IN 1
3 HDMI IN 2
4 HDMI IN 3
5 HDMI IN 4
17
NO MENU
Invalidity
18
IF STATUS (Not for service)
1 DSP STATUS
19
BUS CHECK
1 TI BUS:
20
NO MENU
Invalidity
21
PROTECTION HISTORY
1 HISTORY 1
2 EEPROM:
2 HISTORY 2
3 HISTORY 3
4 HISTORY 4
RX-V371/HTR-3064
22
SOFT SWITCH
1 SWITCH MODE
2 MODEL
3 DESTINATION
23
UPDATE (Not for service)
1 TI FLASH BOOT
24
FACTORY PRESET
1 PRESET INHIBIT
2 PRESET RESERVED
25
ROM VER/SUM/PORT
1 FIRMWARE VERSION
2 ALL CHECKSUM
3 TI (DSP) FLASH ROM VERSION
4 TI (DSP) FLASH ROM CHECKSUM
5 MODEL/DESTINATION
6 Verify (Not for service)
26
MODEL/DESTINATION (Not for service)
1 MODEL/DEST
2 M/D:
24
RX-V371/HTR-3064
● Starting Self-Diagnostic Function
While pressing the “TONE CONTROL” and “STRAIGHT” keys, press the “ ” (Power) key to turn on the power.
The self-diagnostic function mode is activated.
Keys of this unit
While pressing these keys, turn on the power.
● Starting Self-Diagnostic Function in the protection cancel mode
RX-V371/HTR-3064
If the protection function works and causes hindrance to trouble shoot, cancel the protection function as described below,
and it will be possible to enter the self-diagnostic function mode.
(The protection functions other than the excess current detect function will be disabled.)
While pressing the “TONE CONTROL” and “STRAIGHT” keys as shown in the figure above, press the “ ” (Power) key to
turn on the power and keep pressing those 2 keys and the “ ” (Power) key for 3 seconds or longer.
The self-diagnostic function mode is activated with the protection functions disabled.
In this mode, the “SLEEP” segment of the FL display of this unit flashes to indicate that the mode is self-diagnostic function
mode with the protection functions disabled.
CAUTION!
Using this product with the protection function disabled may cause further damage to this unit. Use special care for this
point when using this mode.
● Canceling Self-Diagnostic Function
1.
2.
Before canceling self-diagnostic function, execute setting for FACTORY PRESET of main menu No.24. (Memory
initialization inhibited or Memory initialized).
* In order to keep the user memory preserved, be sure to select PRESET INHIBITED (Memory initialization inhibited).
Press the “ ” (Power) key to turn off the power.
25
RX-V371/HTR-3064
● Display provided when Self-Diagnostic Function started
The display is as described below depending on the situation the last time the power to this unit is turned off.
1. When the power is turned off normally:
“NO PROTECT” is displayed. “1. ANALOG BYPAS” menu is displayed in a few seconds.
Opening message
Main menu display
After a few seconds
NO PROTECT
1.ANALOG BYPAS
2. When the protection function worked to turn off the power:
The data of protection function which worked at the moment “1.ANALOG BYPAS” menu is displayed in a few seconds.
Note: At the time if you reactivate the self-diagnostic function after turning off the power once by pressing the “ ” (Power)
key, “NO PROTECT” will be displayed because that situation is equal to “1. When the power is turned off by usual
operation:” described above.
However the protection function history is stored in a back-up IC with a backup. For details, refer to “21.
PROTECTION HISTORY” menu.
2-1. When the protection function worked due to excess current.
RX-V371/HTR-3064
PS PRT:xxxL
AD value when the protection function is working
Cause: An excessive current flowed through the power amplifier.
Supplementary information: As current of the power amplifier is detected, the abnormal channel can be identified by
checking the current detect transistor.
Turning on the power without correcting the abnormality will cause the protection function to work immediately and the
power supply will instantly be shut off.
Notes)
26
•
Applying the power to this unit without correcting the abnormality can be dangerous and cause additional
circuit damage. To avoid this, if “PS” and “DC” protection function works 3 times consecutively, the power will
not turn on even when the “ ” (Power) key is pressed.
In order to turn on the power again, disconnect the power cable of this unit from the AC outlet once and then
reconnect it again.
•
The output transistors in each amplifier channel should be checked for damage before applying power to this unit.
•
Amplifier current should be monitored by measuring DC voltage across the emitter resistors for each channel.
RX-V371/HTR-3064
2-2. When the protection function worked due to a short between speaker terminals.
I PROTECT
Cause: The line between speaker terminals is shorted.
Supplementary information: As the excess current is detected after operation of the speaker relay, the shorted speaker
terminal and the connected speaker can be identified.
Turning on the power without correcting the abnormality will cause the protection function to work immediately and the
power supply will instantly be shut off.
2-3. When the protection function worked due to abnormal DC output.
DC PRT:xxxH
AD value when the protection function is working
Cause: DC output of the power amplifier is abnormal.
Supplementary information: The protection function worked due to a DC voltage appearing at the speaker terminal. A
cause could be a defect in the amplifier.
RX-V371/HTR-3064
Turning on the power without correcting the abnormality will cause the protection function to work in 3 seconds and the
power supply will be shut off.
2-4. When the protection function worked due to abnormal voltage in the power supply section.
PRV PRT:xxxL
AD value when the protection function is working
Cause: The voltage in the power supply section is abnormal.
Supplementary information: The protection function worked due to a defect or overload in the power supply.
Turning on the power without correcting the abnormality will cause the protection function to work in 1 seconds and the
power supply will be shut off.
27
RX-V371/HTR-3064
2-5. When the protection function worked due to excessive heatsink temperature.
TMP PRT:xxxL
AD value when the protection function is working
Cause: The temperature of the heatsink is excessive.
Supplementary information: The protection function worked due to the temperature limit being exceeded.
Causes could be poor ventilation or a defect related to the thermal sensor.
Turning on the power without correcting the abnormality will cause the protection function to work in 1 seconds and the
power supply will be shut off.
*
For detection of each protection function, refer to main menu described later.
● History of protection function
When the protection function has worked, its history is stored in memory with a backup.
Even if no abnormality is noted while servicing the unit, an abnormality which has occurred previously can be defined
as long as the backup data has been stored.
RX-V371/HTR-3064
The history of the protection function will be initialized when self-diagnostic function is cancelled with “24-2. PRESET
RESERVED” (Memory initialized) menu selected.
28
RX-V371/HTR-3064
● Operation procedure of Main menu and Sub-menu
There are 26 main menu items, each of which has sub-menu items.
Main menu selection
Select the main menu using “SCENE TV” (forward) and “SCENE BD/DVD” (reverse) keys.
Sub-menu selection
Select the sub-menu using “SCENE RADIO” (forward) and “SCENE CD” (reverse) keys.
Keys of this unit
Main menu selection
Reverse
Forward
Sub-menu selection
Reverse
Forward
RX-V371/HTR-3064
● Functions in Self-Diagnostic Function mode
In addition to the self-diagnostic function menu items, functions as listed below are available.
•
•
•
•
Power ON/OFF
Master volume
Muting
Input selection
*
Functions related to the tuner and the set menu are not available.
● Initial settings when Self-Diagnostic Function started
The following initial settings are used when starting self-diagnostic function.
When self-diagnostic function is canceled, these settings are restored to those before starting self-diagnostic function.
•
•
•
•
Master volume: -20 dB
Input: AV5
Main menu: 1. ANALOG BYPASS
Speaker setting: LARGE, Bass out to SWFR (All channels)
29
RX-V371/HTR-3064
● Details of Self-Diagnostic Function menu
1. BYPASS
This menu is used to check audio signal route of analog bypass.
1-1. ANALOG BYPASS
The analog input audio signal is output to FRONT L/R in DIRECT mode.
1.ANALOG BYPAS
INPUT: AV5 ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Input level
Volume
Both ch, -20 dBm
+6.5 dB
SPEAKER OUTPUT
FRONT
CENTER
SURROUND
SUBWOOFER
OUTPUT
+11.5 dBm
-∞
-∞
-∞
ANALOG BYPASS
FL / FR
DIR
DSP
LC89058
RX-V371/HTR-3064
(DECODE)
(POST PROCESSING)
C / SW
TI D70Y
SL / SR
A/D
PCM1803
DRAM
ROM
(Shaded items not used in this example)
30
RX-V371/HTR-3064
2. RAM THROUGH
This menu is used to check audio signal route via DSP.
2-1. RAM MARGIN
The audio signal is output including the head margin.
2.RAM MARGIN
INPUT: AV5 ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Input level
Volume
Both ch, -20 dBm
+6.5 dB
SPEAKER OUTPUT
FRONT
CENTER
SURROUND
SUBWOOFER
OUTPUT
+11.5 dBm
+11.5 dBm
+11.5 dBm
-6.5 dBm
2-2. RAM FULL ALL
The SUBWOOFER signal is output including the head margin.
The audio signal other than SUBWOOFER is output without the head margin.
2.RAM FULL ALL
RX-V371/HTR-3064
INPUT: AV5 ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Input level
Volume
Both ch, -20 dBm
+6.5 dB
SPEAKER OUTPUT
FRONT
CENTER
SURROUND
SUBWOOFER
OUTPUT
+11.5 dBm
+11.5 dBm
+11.5 dBm
-6.5 dBm
2-3. RAM FULL CENTER
The audio signal is output to only CENTER channel in digital full bit without the head margin.
2.RAM FULL C
INPUT: AV5 ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Input level
Volume
Both ch, -20 dBm
+6.5 dB
SPEAKER OUTPUT
FRONT
CENTER
SURROUND
SUBWOOFER
OUTPUT
-∞
+11.5 dBm
-∞
-∞
31
RX-V371/HTR-3064
2-4. RAM FULL SURROUND
The audio signal is output to only SURROUND L/R channels in digital full bit without the head margin.
2.RAM FULL SUR
INPUT: AV5 ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Input level
Volume
Both ch, -20 dBm
+6.5 dB
SPEAKER OUTPUT
FRONT
CENTER
SURROUND
SUBWOOFER
OUTPUT
-∞
-∞
+11.5 dBm
-∞
2-5. RAM FULL SURROUND BACK
Not for service.
2.RAM FULL SB
RAM THROUGH
RX-V371/HTR-3064
FL / FR
DIR
DSP
LC89058
(DECODE)
(POST PROCESSING)
C / SW
TI D70Y
SL / SR
A/D
PCM1803
DRAM
ROM
(Shaded items not used in this example)
32
RX-V371/HTR-3064
3. HDMI AUDIO
This menu is used to check the route of audio signal input to HDMI IN/OUT.
* When selecting “3-3. DSD” menu, be sure to connect an HDMI unit equipped with DSD output function to this unit.
* When selecting “3-4. ARC” menu, be sure to connect an HDMI unit equipped with ARC output function to this unit.
3.SPDIF
3-1. SPDIF
SPDIF signal is output.
3.Multi
3-2. Multi (DVD-Audio)
Multi signal is output.
3.DSD
3-3. DSD (Direct stream digital)
DSD signal is output.
3.ARC
3-4. ARC (Audio return channel)
The audio signal input from HDMI OUT is output.
RX-V371/HTR-3064
4. SPEAKER SET
This menu is used to check the speaker output.
The analog switch settings for each sub-menu are as shown in the table below.
FRONT
: SML 0dB
FRONT
CENTER
SURROUND
SUBWOOFER
SMALL
LARGE
LARGE
SWFR
CENTER : NONE
LARGE
NONE
LARGE
SWFR
LFE/B
: FRONT
LARGE
SMALL
SMALL
FRONT
TONE
: MAX
LARGE
LARGE
LARGE
SWFR
TONE
: MIN
LARGE
LARGE
LARGE
SWFR
LARGE
LARGE
LARGE
SWFR
SPEAKER 6-ohms
LARGE: This mode is used for a speaker with high bass reproduction performance (a large unit). Full bandwidth
signals are output.
SMALL: This mode is used for a speaker with low bass reproduction performance (a small unit).
The signals of 90 Hz or less are mixed into the channel specified by LFE/BASS.
NONE:
This mode is used for no center speaker.
The center content is reduced by 3 dB and distributed to FRONT L/R.
SWFR:
LFE of 5.1 channel signal or LFE/BASS lower than 90 Hz is output through SUBWOOFER OUT.
FRONT: LFE of 5.1 channel signal or LFE/BASS lower than 90 Hz is distributed to FRONT L/R.
33
RX-V371/HTR-3064
4.FRNT:SML 0dB
4-1. FRONT: SML 0dB
The FRONT L/R signal, when 90 Hz or lower, is mixed to the channel specified by LFE/BASS.
4-2. CENTER: NONE
4.CENTER:NONE
The CENTER signal is distributed to FRONT L/R.
4-3. LFE / BASS: FRONT
4.LFE/B:FRNT
The LFE/BASS signal is distributed to FRONT L/R.
4-4. TONE: MAX
4.TONE:MAX
The audio signal is output with the tone control “BASS +10 dB”, “TREBLE +10 dB”.
4-5. TONE: MIN
4.TONE:MIN
The audio signal is output with the tone control “BASS -10 dB”, “TREBLE -10 dB”.
4.SPEAKER 6ohm
4-6. SPEAKER 6 ohms
RX-V371/HTR-3064
Not for service.
INPUT: AV5 ANALOG
SPEAKER OUT: 1 kHz, SUBWOOFER OUTPUT: 50 Hz
Sub-menu
FRNT
: SML 0dB
Volume
FRONT
CENTER
SURROUND
SUBWOOFER
OUTPUT
Both ch, -20 dBm
+6.5 dB
+11.5 dB
+11.5 dB
+11.5 dB
-1.5 dB
CENTER : NONE
Both ch, -20 dBm
+6.5 dB
+16.0 dB
-∞
+11.5 dB
-6.5 dB
LFE/B
: FRNT
Both ch, -20 dBm
+6.5 dB
-∞
+11.5 dB
+11.5 dB
-∞
TONE
: MAX
Both ch, -20 dBm
+6.5 dB
+14.0 dB
+11.5 dB
+11.5 dB
-6.5 dB
TONE
: MIN
Both ch, -20 dBm
+6.5 dB
+8.5 dB
+11.5 dB
+11.5 dB
-6.5 dB
Both ch, -20 dBm
+6.5 dB
+11.5 dB
+11.5 dB
+11.5 dB
-6.5 dB
SPEAKER 6 ohms
34
SPEAKER OUTPUT
Input level
RX-V371/HTR-3064
5. LIMITER CONTROL
Not for service.
5.AC̲B:Hi
5-1. AC-B: Hi
5.AC̲B:Lo
5-2. AC-B: Lo
255255230000̲̲
5-3. LIM / PLDET / THM
RX-V371/HTR-3064
6. MIC CHECK (R, K, A, B, G, F, L, S models)
The signals input through the microphone are output to only FRONT L channel via A/D–D/A.
6.MIC CHK
ON
35
RX-V371/HTR-3064
7.
FL/MONITOR CHECK
This menu is used to check the FL display and video monitor output.
When checking the video monitor output, connect a TV monitor to this unit with a component video cable and video
pin cable. Prepare a video source which can also output component video and video (composite).
Using the sub-menu, the FL display and video monitor output change together as shown below.
FL display
Video monitor output
7-1. INITIAL DISPLAY
MONITOR output ON
7-2. ALL SEGMENT OFF
MONITOR (VIDEO) output mute
7-3. ALL SEGMENT ON
MONITOR (COMPONENT) output mute
* After check, change to next
RX-V371/HTR-3064
menu at once.
7-4. DIMMER 50 %
MONITOR output ON
7-5. CHECK PATTERN
MONITOR output ON
Lighting in lattice
Short
Normal
Segment conditions of the FL driver and the FL tube are checked by turning ON and OFF all segments.
Next, the operation of the FL driver is checked by using the dimmer control.
Then a short between segments next to each other is checked by turning ON and OFF all segments alternately (in lattice).
(In the above example, the segments in the second row from the top are shorted.)
36
RX-V371/HTR-3064
8. MANUAL TEST
The built-in noise generator of DSP outputs the test noise through the channels specified by using the sub-menu.
for SUBWOOFER
for other than SUBWOOFER
Test noise
30 Hz to 80 Hz, pink noise
500 Hz to 2 kHz, pink noise
8-1. TEST ALL
The test noise is output from all channels.
8.TEST ALL
9. A/D DATA CHECK
This menu is used to display the A/D conversion value of the microprocessor which detects panel keys and protection
functions by using the sub-menu.
When K1/K2 menu is selected, keys become non-operable due to detection of the values of all keys.
However, it is possible to advance to the next main menu by turning the “VOLUME” knob of this unit.
* Numeric values in the figure are given as reference only.
PS:
DC:
RX-V371/HTR-3064
9-1. PS/DC
Power supply voltage protection detection
Detected:
AC2, ±12A, S9, +7D, +5A, +5I, -VP
Detection port:
93 pin (PS_PRT)
Normal value:
101 to 155
(Reference voltage: 3.3 V=255)
Power amplifier DC (DC voltage) output is detected.
Detection port:
87 pin (DC_PRT)
Normal value:
27 to 88
(Reference voltage: 3.3 V=255)
* If PS or DC becomes out of the normal value range, the protection function works to turn off the power.
PS:126 DC:058
9-2. TH1/TH2
Temperature of the heatsink is detected.
Detection port:
89 pin (THM1_PRT)
90 pin (THM2_PRT) (U, C models)
Normal value:
87 to 255
(Reference voltage: 3.3 V=255)
* If TH1 or TH2 becomes out of the normal value range, the protection function works to turn off the power.
TH1:226
2:226
37
RX-V371/HTR-3064
9-3. AMP/DK
AMP:
DK:
Power amplifier output level is detected.
Detection port:
88 pin (AMP_OLV)
Normal value:
128 to 255
(Reference voltage: 3.3 V=255)
DOCK type detection (U, C, R, K, A, B, G, F, L, S models)
Detection port:
95 pin (IPD_TYPE)
(Reference voltage: 3.3 V=255)
AMP:255 DK:255
DOCK detection for AD port
Pull-up resistance 10 k-ohms
Display
DOCK type
(DKID 95 pin)
5 – 25
Bluetooth
(YBA-10)
85 – 100
Wireless iPod
(YID-W10)
120 – 140
150 – 170
iPod
(YDS-10/11/12(B*))
(YDS-12(A*))
* Mode switch setting of the YDS-12
255
No connected
9-4. K1/K2
Panel key of this unit is detected.
RX-V371/HTR-3064
When the A/D conversion value of the panel key becomes out of the specified range, normal operation will not
be available.
In that case, check the constant of voltage dividing resistor, solder condition, etc. Refer to table.
(Reference voltage: 3.3 V=255)
It is possible to advance to the next main menu by turning the “VOLUME” knob of this unit.
K1:255 K2:255
Display
K1
Display
0 – 11
STRAIGHT
0 – 11
12 – 37
38 – 64
12 – 32
33 – 54
65 – 88
AM
55 – 75
79 – 113
FM
76 – 96
114 – 139
140 – 164
38
TUNING
>>
TUNING
<<
PRESET
>
PRESET
<
97 – 119
120 – 142
K2
RADIO
(SCENE4)
CD
(SCENE3)
TV
(SCENE2)
BD/DVD
(SCENE1)
PROGRAM
>
PROGRAM
<
INPUT
>
INPUT
<
165 – 186
MEMORY
143 – 163
187 – 226
INFO
164 – 181
255
KEY OFF
182 – 197
(Power)
198 – 209
TONE
CONTROL
255
KEY OFF
–
RX-V371/HTR-3064
10. VIDEO CHECK
This menu is used to check the video control section.
10-1. I2C check
The I2C (Inter integrated circuit) bus line connection is checked.
0 : No error detected
I2C: 00000000
1 : An error is detected
0 bit : –
1 bit : –
2 bit : –
3 bit : HDMI TRANSMITTER (IC202 on DIGITAL P.C.B.)
4 bit : HDMI RECEIVER (IC201 on DIGITAL P.C.B.)
5 bit : –
6 bit : –
7 bit : –
RX-V371/HTR-3064
11. NO MENU
11.Invalidity
12. NO MENU
12.Invalidity
13. NO MENU
13.Invalidity
39
RX-V371/HTR-3064
14. DOCK (U, C, R, K, A, B, G, F, L, S models)
This menu is used to check the DOCK jack.
14-1. DOCK
This menu is used to check the DOCK jack without the iPod itself.
With the power turned off, short between pins of the DOCK jack as shown in the figure bellow.
Start up the self-diagnostic function and select this menu.
The check result is displayed according to the following display specifications.
15
16
9
10
11
3
4
5
1
19
17
18
12
13
14
6
7
8
20
21
2
DOCK:
OK YYYY
All Y = “OK”
10 k-ohms
1/4 W
5.6 k-ohms
1/4 W
Note) Be sure to return the shorted pins to their original condition after executing this test.
Others = “NG”
RX-V371/HTR-3064
DOCK jack
Check item
Short pins
Result
Display
UART loop back test
Pins No.14 (TX)
– No.18 (RX)
OK
Y
NG
N
iPAP (iPod accessory power) detection
Pins No. 1 (PWR)
IC221
– No. 17 (ACCPOW) pin No. 64
High = YES
Y
Low = No
N
iPDET (iPod installation to DOCK) detection
Pins No.4 (iPDET)
IC221
– No.8 (DGND) pin No. 65
Low = installed
Y
High = not installed
N
10 k-ohms,
1/4 W pull down
Y
DKID (DOCK ID) detection
Pins No.21 (DKID)
– No.8 (DGND) IC221
* 10 k-ohms, 1/4 W pin No. 95
pull down
Other
N
14-2. BT (Bluetooth version)
The firmware version of the YBA-10 (Bluetooth Wireless audio receiver) is displayed.
Before selecting this menu, connect the YBA-10 to the DOCK jack of this unit.
BT V:--------
40
⎫
⎬
⎭
⎫
⎬
⎭
⎫
⎬
⎭
⎫
⎬
⎭
RX-V371/HTR-3064
15. HDMI INFORMATION
This menu is used to display information about HDMI.
MN:RX-V371
15-1. HDMI model name
The model name of this unit written in HDMI module is displayed.
RX-V371/HTR-3064
15-2. HDMI product ID
PI: 3161
The product ID of this unit written in HDMI module is displayed.
RX-V371: 3161
HTR-3064: 316C
VN: YAMAHA
15-3. HDMI vendor name
“YAMAHA”, the vendor name of this unit written in HDMI module, is displayed.
RX-V371/HTR-3064
16. HDMI SELECT
This menu is used to display information of the HDMI input signal.
* Support audio is set to “OTHER”.
16-1. HDMI none
HDMI NONE
No signal is output.
HDMI IN 1
**
16-2. HDMI in 1
The signal input to HDMI “IN 1” is output.
* * When deep color video signals are input, “30” bit or “36” bit is displayed.
HDMI IN 2
**
16-3. HDMI in 2
The signal input to HDMI “IN 2” is output.
HDMI IN 3
**
16-4. HDMI in 3
The signal input to HDMI “IN 3” is output.
HDMI IN 4
**
16-5. HDMI in 4
The signal input to HDMI “IN 4” is output.
41
RX-V371/HTR-3064
17. NO MENU
17.Invalidity
18. IF STATUS (Input function status)
Not for service.
DST:710E0F2390
19. BUS CHECK
This menu is used to check the communication and bus line connection between devices on the DIGITAL P.C.B.
19-1. TI (DSP) BUS check
Communication and bus line connection between microprocessor (IC221) and TI (IC241) are checked.
RX-V371/HTR-3064
TI BUS:NoEr
NoEr:
No error detected.
Boot:
When “Boot” is displayed for a few seconds or “Boot” and “NoEr” are displayed alternately, there is a
possibility that an error had occurred.
19-2. EEPROM BUS check
Communication and bus line connection between microprocessor (IC221) and EEPROM (IC222) are checked.
EEPROM BUS:OK
OK:
No error detected.
NG:
An error is detected.
20. NO MENU
20.Invalidity
42
RX-V371/HTR-3064
21. PROTECTION HISTORY
This menu is used to display the history of protection function.
All history of protection function will be erased by pressing the “STRAIGHT” key.
* Numeric values in the figure are given as reference only.
Example
21-1.PS1
078L
21-1. History 1
H: When the upper limit of the protection function is exceeded.
L: When the lower limit of the protection function is exceeded.
A/D value when the protection function is activated. (Reference voltage: 3.3 V=255)
Example
21-2.Dc
126H
21-2. History 2
000L
21-3. History 3
000H
21-4. History 4
Example
21-3.Tmp
RX-V371/HTR-3064
Example
21-4.I
43
RX-V371/HTR-3064
22. SOFT SWITCH
When the following parts are replaced, the model name and the destination MUST be written to the back-up IC
(EEPROM: IC222 on DIGITAL P.C.B.) to have proper operation.
• DIGITAL P.C.B.
• EEPROM: IC222 on DIGITAL P.C.B.
Note) When the DIGITAL P.C.B. is replaced, the firmware must be updated to the latest version.
(See “UPDATING FIRMWARE”)
* The model name and destination set in this menu are preserved even after this unit is initialized.
22-1. SWITCH MODE
Press the “STRAIGHT” key to select the “22. SW: MODEL”. This unit is in the mode where the model name and
the destination can be written.
22. SW: PCB:
Model name and destination can not be written.
22. SW: MODEL: Model name and destination can be written.
* When selecting “22. SW: MODEL”, be sure to switch back to “22. SW: PCB” after correct model
name and destination is set.
22.SW
:PCB
22.SW
:MODEL
RX-V371/HTR-3064
Press the “STRAIGHT” key
22-2. MODEL
Press the “STRAIGHT” key to select the model name, “V371” (RX-V371) or “H3064” (HTR-3064). Selected model
name is written automatically.
22.MODEL: V371
22.MODEL:H3064
Press the “STRAIGHT” key
22-3. DESTINATION
Press the “STRAIGHT” key repeatedly to select the destination. Selected destination is written automatically.
Press the “STRAIGHT”
22.DEST :U
22.DEST :C
22.DEST :R
22.DEST :T
R: R, S models
22.DEST :K
22.DEST :A
22.DEST :G
G: B, G, F models
44
22.DEST :L
RX-V371/HTR-3064
23. UPDATE TI
Not for service.
23.UPDATE TI
24. FACTORY PRESET
This menu is used to reserve/inhibit initialization of the back-up IC (EEPROM: IC222 on DIGITAL P.C.B.).
24.PRESET INHI
24-1. PRESET INHIBIT (Initialization inhibited)
Initialization of the back-up IC is not executed. Select this sub-menu to protect the values set by the
user.
24.PRESET RSRV
24-2. PRESET RESERVED (Initialization reserved)
Initialization of the back-up IC is reserved. (Actual initialization is executed the next time the power is
turned on.) To reset to the original factory settings or to reset the backup IC. Select this sub-menu and
press the “ ” (Power) key to turn off the power.
RX-V371/HTR-3064
CAUTION: Before setting to the PRESET RESERVED, write down the existing preset memory content of the tuner.
(This is because setting to the PRESET RESERVED will cause the user memory content to be erased.)
45
RX-V371/HTR-3064
25. ROM VER/SUM/PORT
The firmware version, checksum values, model name and destination are displayed.
The checksum is obtained by adding the data at every 8-bits for each program area and expressing the result as a
4-figure hexadecimal notation.
* Numeric values in the figure are given as reference only.
VER.
A009
25-1. Firmware version
The firmware version of microprocessor (IC221 on DIGITAL P.C.B.) is displayed.
Sum:
C757
25-2. All checksum
The checksum value of microprocessor (IC221 on DIGITAL P.C.B.) is displayed.
TiVer:01.01r1
25-3. TI (DSP) FLASH ROM version
The firmware version of TI (DSP) FLASH ROM (IC243 on DIGITAL P.C.B.) is displayed.
TiSum:75FA5869
25-4. TI (DSP) FLASH ROM checksum
RX-V371/HTR-3064
The checksum value of TI (DSP) FLASH ROM (IC243 on DIGITAL P.C.B.) is displayed.
V3 000
U 111
25-5. MODEL/DESTINATION
The model name and destination are displayed.
DESTINATION detection value
Detection value
Destination
111
222
333
444
555
666
777
888
U
C
R (R, S)
T
K
A
G (B, G, F)
L
MODEL detection value
Detection value
Model name
Verify 255
0
111
V3 (RX-V371)
H3 (HTR-3064)
25-6. VERIFY
Not for service.
26. MODEL/DESTINATION
Not for service.
26.MODEL/DEST
46
26.M/D: V371 U
RX-V371/HTR-3064
■ DISPLAY DATA
● V1001 : 18-MT-09GNK (OPERATION P.C.B.)
69
1
PATTERN AREA
● PIN CONNECTION
Pin No.
69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35
Connection F2 NX NP NP P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 P23 P24 P25 P26 P27 P28 P29 P30 P31
34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Pin No.
Connection P32 P33 P34 P35 P36 NX NX NX NX NX NX NX 18G 17G 16G 15G 14G 13G 12G 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G NP NP NX F1
Note : 1) F1, F2 ..... Filament pin
2) NP ..... No pin
3) NX ..... No extend pin
4) 1G-18G ..... Grid pin
● GRID ASSIGNMENT
18G
2a
1G
1a
2G
S8
3G
S9
2a
1a
4G
2a
5G
6G
7G
15G
17G
S17
8G
S16
9G
S14 S15
10G
11G
S7
12G
13G
a
1-1
2-1
3-1
4-1
5-1
1-2
2-2
3-2
4-2
5-2
2-3
3-3
4-3
5-3
1-4
2-4
3-4
4-4
5-4
S3
b
h
k
r
n
m
3-5
4-5
5-5
1-6
2-6
3-6
4-6
5-6
1-7
2-7
3-7
4-7
5-7
f
S5
b
S3
S4
S2
g
c
e
2-5
a
j
g
1-5
2a
S6 S13
S2
f
1-3
14G
1a
RX-V371/HTR-3064
1a
S12 S10 S11
16G
17G
c
e
p
d
(18G-16G)
d
(15G)
S1
(1G-14G)
47
RX-V371/HTR-3064
RX-V371/HTR-3064
● ANODE CONNECTION
18G
17G
16G
15G
1G-14G
P1
1a
1a
1a
S5
1-1
P2
1h
1h
1h
S7
2-1
P3
1j
1j
1j
1d
3-1
P4
1k
1k
1k
2d
4-1
P5
1b
1b
1b
S2
5-1
P6
1f
1f
1f
1e
1-2
P7
1m
1m
1m
2e
2-2
P8
1g
1g
1g
S3
3-2
P9
1c
1c
1c
1c
4-2
P10
1e
1e
1e
2c
5-2
P11
1r
1r
1r
S4
1-3
P12
1p
1p
1p
1g
2-3
P13
1n
1n
1n
2g
3-3
P14
1d
1d
1d
1f
4-3
P15
2a
2a
2a
2f
5-3
P16
2h
2h
2h
1b
1-4
P17
2j
2j
2j
2b
2-4
P18
2k
2k
2k
1a
3-4
P19
2b
2b
2b
2a
4-4
P20
2f
2f
2f
5-4
P21
2m
2m
2m
1-5
P22
2g
2g
2g
2-5
P23
2c
2c
2c
3-5
P24
2e
2e
2e
4-5
P25
2r
2r
2r
5-5
P26
2p
2p
2p
1-6
P27
2n
2n
2n
2-6
P28
2d
2d
2d
3-6
P29
S8
4-6
P30
S9
5-6
P31
S6
1-7
P32
S13
2-7
P33
48
S15
3-7
P34
S12
P35
S10
S14
S17
5-7
P36
S11
–
S16
S1
4-7
RX-V371/HTR-3064
■ IC DATA
MUTE 51
DATA
CLOCK
DGND
SUBR1
SUBL1
SBLCIN
SBRCIN
FRIN2
FLIN2
SRIN2
SLIN2
SWIN2
CIN2
SBRIN2
SBLIN2
SLCIN
SRCIN
SUBR2
SUBL2
AVCC
R2A15220FP (MAIN P.C.B.)
8-channel electronic volume with 11 input selector and tone control
50
49
48
47
46 45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
AVEE
A VEE 52
ADCL 53
ATT
30 TRER
MCU
I/F
AVCC
27 TREL
SUB2
AGND 55
29 BASSR2
28 BASSR1
0/-6/-12/-18dB
ADCR 54
26 BASSL2
SUB
MAIN
SUB
MAIN
MAIN
INR1 56
Bass/Treble
-14~+14dB
(2dBstep)
0~-95dB,
-∞
(0.5dBstep)
INL1 57
INR2 58
23 FR Pre-OUT
+42~0dB
(0.5dBstep)
Tone+MIX
Tone
Tone
INR3 60
24 FRC
Tone
Tone+MIX
SUB
INL2 59
25 BASSL1
+42~0dB
(0.5dBstep)
Bypass
Tone
22 FROUT
21 AGND
Bypass
INL3 61
0~95dB,
-∞
(0.5dBstep)
INR4 62
20 FLOUT
Bass/Treble
-14~+14dB
(2dBstep)
19 FL Pre-OUT
INL4 63
18 FLC
+42~-95dB
-(0.5dBstep)
INR5 64
17 CC
16 COUT
INL5 65
15 AGND
+42~-95dB
-∞(0.5dBstep)
INL6 67
RX-V371/HTR-3064
+42~-95dB
-∞(0.5dBstep)
INR6 66
14 SWOUT
13 SWC
INR7 68
+42~-95dB
-∞(0.5dBstep)
INL7 69
12 SRC
INR8 70
11 SR Pre-OUT
REC
INL8 71
10 SROUT
+42~-95dB
-∞(0.5dBstep)
INRA/RECR1 72
9 A GND
8 SLOUT
INLA/RECL1 73
INR9 74
7 SL Pre-OUT
+42~-95dB
-∞(0.5dBstep)
INL9 75
6 SLC
INRB/RECR2 76
5 AGND
INLB/RECL2 77
4 SBRC
88
89
90
91
92
93
94
95
96
97
98
FLIN1
FRIN1
CIN1
SWIN1
SLIN1
SRIN1
SBLIN1
SBRIN1
SBLC
99 100
SBL OUT
87
SBL Pre-OUT
86
RECL3
84 85
RECR3
83
INL13
82
INR13
81
INL14
1 AGND
INR14
2 SBR OUT
INR11/RECR5 80
INL12
3 SBR Pre-OUT
INR10/RECL4 79
INR12
INR10/RECR4 78
INL11/RECL5
IC21:
49
RX-V371/HTR-3064
RX-V371/HTR-3064
Pin No.
50
Port Name
Function Name
Detail of Function
1
AGND
AE
Analog ground of internal circuit
2
SBROUT
VOSBL
Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
3
SBR Pre-OUT
VOPSBL
Pre-output pin of FL/FR/SL/SR/SBL/SBR channel
4
SBRC
AE
Connects capacitor for reducing click noise of L/R/C/SW/SL/SR/SBL/SBR channel volume
5
AGND
AE
Analog ground of internal circuit
6
SLC
VOPSR
Connects capacitor for reducing click noise of L/R/C/SW/SL/SR/SBL/SBR channel volume
7
SL Pre-OUT
VOSR
Pre-output pin of FL/FR/SL/SR/SBL/SBR channel
8
SLOUT
AE
Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
9
AGND
AE
Analog ground of internal circuit
10
SROUT
VOSL
Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
Pre-output pin of FL/FR/SL/SR/SBL/SBR channel
11
SR Pre-OUT
VOPSL
12
SRC
AE
13
SWC
AE
14
SWOUT
VOSW
Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
15
AGND
AE
Analog ground of internal circuit
16
COUT
VOC
Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
17
CC
AE
18
FLC
AE
Connects capacitor for reducing click noise of L/R/C/SW/SL/SR/SBL/SBR channel volume
Connects capacitor for reducing click noise of L/R/C/SW/SL/SR/SBL/SBR channel volume
19
FL Pre-OUT
VOPFR
Pre-output pin of FL/FR/SL/SR/SBL/SBR channel
20
FLOUT
VOFR
Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
21
AGND
POE
Analog ground of internal circuit
22
FROUT
VOFL
Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
23
FR Pre-OUT
VOPFL
Pre-output pin of FL/FR/SL/SR/SBL/SBR channel
24
FRC
AE
Connects capacitor for reducing click noise of L/R/C/SW/SL/SR/SBL/SBR channel volume
25
BASSL1
AE
26
BASSL2
AE
27
TREL
AE
28
BASSR1
AE
29
BASSR2
AE
30
TRER
AE
Frequency characteristic setting pin of L/R channel tone control (Treble)
31
AVCC
VCC
Positive power supply to internal circuit
32
SUBL1
N.C.
33
SUBL2
N.C.
34
SRCIN
N.C.
35
SLCIN
N.C.
36
SBLIN2
8SBR
37
SBRIN2
8SBL
38
CIN2
8C
39
SWIN2
8SW
40
SLIN2
8SR
41
SRIN2
8SL
42
FLIN2
8FR
43
FRIN2
8FL
44
SBRCIN
Z2L
45
SBLCIN
Z2R
46
SUBL1
Z2R
47
SUBR1
Z2L
48
DGND
MG
49
DATA
VOL_SCK
Input pin of control data
50
CLOCK
VOL_MOSI
Input pin of control clock
Frequency characteristic setting pin of L/R channel tone control (Bass)
Frequency characteristic setting pin of L/R channel tone control (Treble)
Frequency characteristic setting pin of L/R channel tone control (Bass)
Output pin for L/R channel SUB1/SUB2 output
3rd multi input pin for SBL/SBR/SL/SR channel volume that is able to swap SBR/SBL with
SR/SL
Multi input pin of L/R/C/SW/SL/SR/SBL/SBR channel (Multi IN 1/2)
3rd multi input pin for SBL/SBR/SL/SR channel volume that is able to swap SBR/SBL with
SR/SL
Output pin for L/R channel SUB1/SUB2 output
Digital ground of internal circuit
RX-V371/HTR-3064
Pin No.
Port Name
Function Name
AE
Detail of Function
51
MUTE
Outside mute control pin
52
AVEE
53
ADCL
ADR
54
ADCR
ADL
55
AGND
AE
56
INR1
AU2L
57
INL1
AU2R
58
INR2
AU1L
59
INL2
AU1R
60
INR3
AV-6L
61
INL3
AV-6R
62
INR4
AV-5L
63
INL4
AV-5R
64
INR5
PHL
65
INL5
PHR
66
INR6
SRL
67
INL6
SRR
68
INR7
IPL
69
INL7
IPR
70
INR8
XML
71
INL8
XMR
72
INRA/RECR1
AV-OUT_L
73
INLA/RECL1
AV-OUT_R
74
INR9
USBL
75
INL9
USBR
76
INRB/RECR2
AOL
77
INLB/RECL2
AOR
78
INR10/RECR4
TUL
79
INL10/RECL4
TUR
80
INR11/RECR5
MIC
81
INL11/RECL5
AE
82
INR12
AUXL
83
INL12
AUXR
84
INR13
AE
85
INL13
AE
86
INR14
AE
87
INL14
AE
88
RECR3
N.C.
89
RECL3
N.C.
90
FLIN1
DAFR
91
FRIN1
DAFL
92
CIN1
DAC
93
SWIN1
DASW
94
SLIN1
DASR
95
SEIN1
DASL
96
SBLIN1
DASBR
97
SBRIN1
DASBL
98
SBLC
AE
Connects capacitor for reducing click noise of L/R/C/SW/SL/SR/SBL/SBR channel volume
99
SBL Pre-OUT
VOPSBR
Pre-output pin of FL/FR/SL/SR/SBL/SBR channel
100
SBL OUT
VOSBR
Output pin of FL/FR/C/SW/SL/SR/SBL/SBR channel
–
Negative power supply to internal circuit
Output pin for L/R channel ADC
Analog ground of internal circuit
Input pin of L/R channel (Input selector)
Output pin for L/R channel (input selector)/Output pin for L/R channel REC output
RX-V371/HTR-3064
Input pin of L/R channel (Input selector)
Output pin for L/R channel (input selector)/Output pin for L/R channel REC output
Input pin of L/R channel (Input selector)
Output pin for L/R channel REC output
Multi input pin of L/R/C/SW/SL/SR/SBL/SBR channel (Multi IN 1/2)
51
RX-V371/HTR-3064
108
107
106
105
104
103
102
101
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
SPI0_CLK/I2C0_SCL
SPI0_SCS/I2C1_SCL
Vss
SPI0_ENA/I2C1_SDA
EM_OE
DVDD
EM_RW
CVDD
EM_CS[2]
Vss
EM_RAS
EM_CS[0]
EM_BA[0]
Vss
EM_BA[1]
EM_A[10]
DVDD
EM_A[0]
CVDD
EM_A[1]
EM_A[2]
Vss
EM_A[3]
CVDD
EM_A[4]
EM_A[5]
Vss
DVDD
EM_A[6]
EM_A[7]
Vss
CVDD
EM_A[8]
EM_A[9]
EM_A[11]
DVDD
IC241: D70YE101BRFP266 (DIGITAL P.C.B.)
Decoder/Post processor
* No replacement part available.
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
Vss
EM_CKE
EM_CLK
Vss
DVDD
EM_WE_DQM[1]
EM_D[8]
CVDD
EM_D[9]
EM_D[10]
Vss
EM_D[11]
DVDD
EM_D[12]
EM_D[13]
CVDD
EM_D[14]
EM_D[15]
Vss
CVDD
EM_D[0]
EM_D[1]
DVDD
EM_D[2]
EM_D[3]
Vss
EM_D[4]
EM_D[5]
CVDD
EM_D[6]
DVDD
EM_D[7]
Vss
EM_WE_DQM[0]
EM_WE
EM_CAS
Vss
AHCLKX0/AHCLKX2
AMUTE0
AMUTE1
AHCLKX1
Vss
ACLKX1
CVDD
ACLKR1
DVDD
AFSX1
AFSR1
Vss
RESET
Vss
CVDD
CLKIN
Vss
TMS
CVDD
TRST
OSCVss
OSCIN
OSCOUT
OSCVDD
Vss
PLLHV
TDI
TDO
Vss
DVDD
EMU[0]
CVDD
EMU[1]
TCK
Vss
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
RX-V371/HTR-3064
Vss
SPI0_SIMO
SPI0_SOMI/I2C0_SDA
DVDD
AXR0[0]
Vss
AXR0[1]
AXR0[2]
AXR0[3]
Vss
AXR0[4]
AXR0[5]/SPI1_SCS
AXR0[6]/SPI1_ENA
AXR0[7]/SPI1_CLK
CVDD
Vss
DVDD
AXR0[8]/AXR1[5]/SPI1_SOMI
AXR0[9]/AXR1[4]/SPI1_SIMO
CVDD
Vss
AXR0[10]/AXR1[3]
AXR0[11]/AXR1[2]
CVDD
Vss
AXR0[12]/AXR1[1]
AXR0[13]/AXR1[0]
DVDD
AXR0[14]/AXR2[1]
AXR0[15]/AXR2[0]
ACLKR0
Vss
AFSR0
ACLKX0
AHCLKR0/AHCLKR1
AFSX0
64
256
Program/Data
ROM Page2
256K Bytes
256
Program/Data
ROM Page3
256K Bytes
Program
Fetch
Program
Cache
32K Bytes
CSP
256
32
I/O Interrupts MAX0
Out
32
32
32
High-Performance
Crossbar Switch
32
32
CONTROL
MAX1
32
32
Events
in
McASP0
16 Serializes
32
PMP DMP
32
32
JTAG EMU
32
32
McASP1
6 Serializes
32
McASP2
2 Serializes
DIT Only
32
SPI1
32
SPI0
32
I2C0
32
I2C1
32
RT1
32
PLL
32
Peripheral Configuration Bus
INT
256
Program/Data
ROM Page1
256K Bytes
Memory
Controller
256
I/O
Program/Data
RAM
256K Bytes
64
C67x+CPU
D2
Data
R/W
256
McASP DMA Bus
D1
Data
R/W
EMIF
dMAX
52
Peripheral Interrupt and DMA Events
RX-V371/HTR-3064
Function Name
(P.C.B.)
No.
TYPE(1)
PULL(2)
GPIO(3)
Detail of Function
1
VSS
2
AHCLKX0/AHCLKX2
IO
–
Y
McASP0 and McASP2 transmit master clock
3
AMUTE0
IO
–
Y
McASP0 mute output
4
AMUTE1
IO
–
Y
McASP1 mute output
5
AHCLKX1
IO
–
Y
McASP1 transmit master clock
6
VSS
7
ACLKX1
IO
–
Y
McASP1 transmit bit clock
8
CVDD
IO
–
Y
McASP1 receive bit clock
9
ACLKR1
10
DVDD
AFSX1
IO
–
Y
McASP1 transmit frame Sync (L/R clock)
AFSR1
IO
–
Y
McASP1 receive frame Sync (L/R clock)
13
VSS
14
RESET
IO
–
N
Device reset pin
15
VSS
16
CVDD
17
CLKIN
IO
–
N
Alternate clock input (3.3-V LVCMOS input)
18
VSS
19
TMS
IO
IPU
N
Test mode select
20
CVDD
21
TRST
22
OSCVSS
23
24
25
OSCVDD
26
VSS
27
PLLHV
28
TDI
29
TDO
30
VSS
31
DVDD
32
EMU[0]
33
CVDD
34
IO
IPU
N
Test reset
PWR
–
N
Oscillator Vss tap point (for filter only)
OSCIN
IO
–
N
1.2-V oscillator input
NC
O
–
N
PWR
–
N
Oscillator 1.2-V Vpp tap point (for filter only)
PWR
–
N
PLL 3.3-V supply input (requires external filter)
IO
IPU
N
Test data in
OZ
IPU
N
Test data out
IO
IPU
N
Emulation pin 0
EMU[1]
IO
IPU
N
Emulation pin 1
35
TCK
IO
IPU
N
Test clock
36
Ground(Vss)
37
EM_CAS
O
–
N
SDRAM column address strobe
38
EM_WE
O
–
N
SDRAM write enable
39
EM_WE_DQM[0]
O
–
N
Write enable or byte enable for EM_D [7:0]
40
VSS
41
EM_D[7]
IO
–
N
EMIF data bus [lower 16-bits]
42
DVDD
43
EM_D[6]
IO
–
N
EMIF data bus [lower 16-bits]
44
CVDD
45
EM_D[5]
IO
–
N
EMIF data bus [lower 16-bits]
46
EM_D[4]
IO
–
N
EMIF data bus [lower 16-bits]
47
VSS
48
EM_D[3]
IO
–
N
EMIF data bus [lower 16-bits]
49
EM_D[2]
IO
–
N
EMIF data bus [lower 16-bits]
50
DVDD
RX-V371/HTR-3064
11
12
53
RX-V371/HTR-3064
Function Name
(P.C.B.)
RX-V371/HTR-3064
No.
PULL(2)
GPIO(3)
Detail of Function
51
EM_D[1]
IO
–
N
EMIF data bus [lower 16-bits]
52
EM_D[0]
IO
–
N
EMIF data bus [lower 16-bits]
53
CVDD
54
VSS
55
EM_D[15]
IO
–
N
EMIF data bus [lower 16-bits]
56
EM_D[14]
IO
–
N
EMIF data bus [lower 16-Bits]
57
CVDD
58
EM_D[13]
IO
–
N
EMIF data bus [lower 16-Bits]
59
EM_D[12]
IO
–
N
EMIF data bus [lower 16-Bits]
60
DVDD
61
EM_D[11]
IO
–
N
EMIF data bus [lower 16-Bits]
62
VSS
63
EM_D[10]
IO
–
N
EMIF data bus [lower 16-Bits]
64
EM_D[9]
IO
–
N
EMIF data bus [lower 16-Bits]
65
CVDD
66
EM_D[8]
IO
–
N
EMIF data bus [lower 16-bits]
67
EM_WE_DQM[1]
O
–
N
Write enable or byte enable for EM_D [15:8]
68
DVDD
69
VSS
70
EM_CLK
O
–
N
SDRAM clock
71
EM_CKE
O
–
N
SDRAM clock enable
72
VSS
73
DVDD
74
EM_A[11]
O
–
N
EMIF address bus
75
EM_A[9]
O
–
N
EMIF address bus
O
–
N
EMIF address bus
76
EM_A[8]
77
CVDD
78
VSS
79
EM_A[7]
O
–
N
EMIF address bus
80
EM_A[6]
O
–
N
EMIF address bus
81
DVDD
82
VSS
83
EM_A[5]
O
–
N
EMIF address bus
84
EM_A[4]
O
–
N
EMIF address bus
85
CVDD
86
EM_A[3]
O
–
N
EMIF address bus
87
VSS
88
EM_A[2]
O
–
N
EMIF address bus
89
EM_A[1]
O
–
N
EMIF address bus
90
CVDD
91
EM_A[0]
O
–
N
EMIF address bus
92
DVDD
93
EM_A[10]
O
–
N
EMIF address bus
94
EM_BA[1]
O
–
N
SDRAM bank address and asynchronous memory Low-Order address
95
VSS
96
EM_BA[0]
O
–
N
SDRAM bank address and asynchronous memory Low-Order address
97
EM_CS[0]
O
–
N
SDRAM chip select
98
EM_RAS
O
–
N
SDRAM row address strobe
99
VSS
O
–
N
Asynchronous memory chip select
100 EM_CS[2]
54
TYPE(1)
RX-V371/HTR-3064
Function Name
(P.C.B.)
TYPE(1)
PULL(2)
GPIO(3)
O
–
N
Asynchronous memory read/not write
104 EM_OE
O
–
N
SDRAM output enable
105 SPI0_ENA/I2C1_SDA
IO
–
Y
SPI0 enable (ready) or I2c1 serial data
107 SPI0_ENA/I2C1_SCL
IO
–
Y
SPI0 enable (ready) or I2c1 serial clock
108 SPI0_CLK/I2C0_SCL
IO
–
Y
SPI0 serial clock or I2c0 serial clock
No.
101
Detail of Function
CVDD
102 NC
103 DVDD
106 VSS
109 VSS
110
SPIO_SIMO
IO
–
Y
SPI0 data pin slave in master out
IO
–
Y
SPI0 data pin slave out master in or I2C0 serial data
IO
–
Y
McASP0 serial data 0
111
SPIO_SOMI/I2C0_SDA
112
DVDD
113
AXR0[0]
114
VSS
115
AXR0[1]
IO
–
Y
McASP0 serial data 1
116
AXR0[2]
IO
–
Y
McASP0 serial data 2
117
AXR0[3]
IO
–
Y
McASP0 serial data 3
118
VSS
119
AXR0[4]
IO
–
Y
McASP0 serial data 4
120 SPI1_SCS
IO
–
Y
McASP0 serial data 5 or SPI1 slave chip select
121 SPI1_ENA
IO
–
Y
McASP0 serial data 6 or SPI1 enable (ready)
122 SPI1_CLK
IO
–
Y
McASP0 serial data 7 or SPI1 serial clock
126 /SPI1_SOMI
IO
–
Y
McASP0 serial data 8 or McASP1 serial data 5 or SPI1 data pin slave
out master in
127 /SPI1_SIMO
IO
–
Y
McASP0 serial data 9 or McASP1 serial data 4 or SPI1 data pin slave in
master out
RX-V371/HTR-3064
123 CVDD
124 VSS
125 DVDD
128 CVDD
129 VSS
130 AXR0[10]
IO
–
Y
McASP0 serial data 10 or McASP1 serial data 3
131 AXR0[11]
IO
–
Y
McASP0 serial data 11 or McASP1 serial data 2
134 AXR0[12]
IO
–
Y
McASP0 serial data 12 or McASP1 serial data 1
135 AXR0[13]
IO
–
Y
McASP0 serial data 13 or McASP1 serial data 0
137 AXR0[14]
IO
–
Y
McASP0 serial data 14 or McASP2 serial data 1
138 AXR0[15]
IO
–
Y
McASP0 serial data 15 or McASP2 serial data 0
139 ACLKR0
IO
–
Y
McASP0 receive bit clock
141 AFSR0
IO
–
Y
McASP0 receive frame Sync (L/R clock)
142 ACLKX0
IO
–
Y
McASP0 transmit bit clock
132 CVDD
133 VSS
136 DVDD
140 VSS
143 AHCLKR0/AHCLKR1
IO
–
Y
McASP0 and McASP1 receive master clock
144 AFSX0
IO
–
Y
McASP0 transmit frame Sync (L/R clock)
55
RX-V371/HTR-3064
IC221: R5F364AMNFB (DIGITAL P.C.B.)
Microprocessor
8
8
Port P0
Port P1
8
8
8
8
Port P1
Port P3
Port P4
Port P5
VCC2 ports
Internal peripheral functions
System clock generator
UART or
clock synchronous serial I/O
Timer (16-bit)
(6 channels)
XIN-XOUT
XCIN-XCOUT
Outputs (timer A): 5
Inputs (timer B): 6
Clock synchronous serial I/O
(8-bit x 2 channels)
PLL frequency synthesizer
On-chip oscillator (125 kHz)
Three-phase motor control
circuit
Multi-master I2C-bus interface
DMAC (4 channels)
(1 channel)
Real-time clock
CRC arithmetic circuit
CEC function
(CRC-CCITT or CRC-16)
PWM function (8-bit x 2)
Remote control signal
receiver (2 circuits)
Voltage detector
Watchdog timer
On-chip debugger
Power-on reset
(15-bit)
M16C/60 series
Microprocessor core
A/D converter
(10-bit resolution x 26
channels)
R0H
R1H
D/A converter
Memory
USP
R2
R3
(8-bit resolution x 2
circuits)
ROM (1)
SB
R0L
R1L
RAM (2)
ISP
INTB
A0
A1
FB
PC
FLG
Multiplier
VCC1 ports
RX-V371/HTR-3064
Port P10
Port P9
8
Port P8
8
Port P7
8
Port P6
8
8
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
74
76
50
77
49
78
48
VCC2 ports
79
47
80
46
81
45
82
44
83
43
84
42
85
41
86
40
87
39
88
38
89
37
90
36
91
35
92
34
93
33
94
32
95
31
96
30
97
29
VCC1 ports
98
28
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
TB4IN
DA0
SOUT3
SIN3
CLK3
BYTE
CNVSS
P8_7
P8_6
N_RESET
XOUT
VSS
XIN
VCC1
NMI
N_INT2
N_INT1
N_INT0
P8_1
P8_0
TA3IN
P7_6
TA2IN
P7_4
P7_3
4
26
3
27
100
2
99
1
RXD6
P1_1
P1_0
P0_7
P0_6
P0_5
P0_4
P0_3
P0_2
P0_1
AN0_0
AN7
AN6
AN5
AN4
AN3
AN2
AN1
AVSS
AN0
VREF
AVCC
SIN4
SOUT4
CLK4
73
75
TXD6
P1_4
N_INT3
P1_6
P1_7
P2_0
P2_1
P2_2
P2_3
N_INT6
N_INT7
P2_6
P2_7
VSS
P3_0
VCC2
P3_1
P3_2
P3_3
P3_4
P3_5
P3_6
P3_7
P4_0
P4_1
Notes:
1. ROM size depends on MCU type.
2. RAM size depends on MCU type.
Notes:
1. N-channel open drain output.
2. Check the position of pin 1 by referring to appendix 1, Package Dimensions.
56
P4_2
P4_3
P4_4
CLK7
RXD7
P4_7
P5_0
P5_1
P5_2
P5_3
P5_4
P5_5
P5_6
P5_7
P6_0
P6_1
SCL0
SDA0
P6_4
CLK1
RXD1
TXD1
SDA2
SCL2
P7_2
RX-V371/HTR-3064
Pin
No.
Port Name
Function
Name
(P.C.B.)
AC off
Detail of Function
RDS READY input / Open drain output (Imax=8
mZ) on LC72725 side
O
Low Fix
O
Low Fix
O
Low Fix
IO
Low Fix
MCU
MCU
MCU
MCU
E8A_CNVSS
MCU
MCU
MCU
MCU
VOL_RB
VOL_RA
N_CPU_RST
XOUT
DGND
XIN
+3.3M
HDM_CEC
REM_IN
I+
I+
MCU
MCU
MCU
MCU
MCU
I+
IRQ
IRQ
O
IRQ
I+
I+
MCU
MCU
MCU
MCU
MCU
I+
IRQ
I-
I+
I+
MCU
MCU
MCU
MCU
MCU
I+
IRQ
I-
I+
I+
MCU
MCU
MCU
MCU
MCU
I+
I
I-
I-
I-
I-
I-
I-
I-
I-
O
High Act
TMR
O
Low Fix
I+
O
Low Fix
I+
O
Low Fix
2 DA0
AMP_LMT
3 SOUT3
DSP_MOSI
4 SIN3
DSP_MISO
5 CLK3
DSP_SCK
6 BYTE
BYTE
7 CNVSS
8
9
10
11
12
13
14
15
16
DA
SO
SI
SO
17 N_INT1
HDM_MUT
18 N_INT0
HDM_INT
19 P8_1
N_MIC_DET
20 P8_0
HTX_PON
21 TA3IN
N_DSP_INT
22 P7_6
(no use)
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
23 TA2IN
N_PDET
TMR
I+
I+
I+
24 P7_4
(no use)
25 P7_3
N_FLD_RST
26 P7_2
N_FLD_CS
27 SCL2
HDM_SCL
O
Low Fix
O
Low Act
O
Low Act
SI
28 SDA2
HDM_SDA
29
30
31
32
E8A_TXD
E8A_RXD
E8A_SCLK
E8A_BUSY
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
SO
SI
O
IO
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
I+
I+
I+
IO
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
I+
I+
I+
IO
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
TXD1
RXD1
CLK1
P6_4
33 SDA0
TUN_SDA
34 SCL0
TUN_SCL
35 P6_1
N_HRX_RST
36 P6_0
N_HTX_RST
SO
SO
SI
O
ISI
O
SO
O
Low Act
O
Low Act
Limiter control output
Synchronous data output for DSP, DIR, DAC
Synchronous data input for DSP, DIR, DAC
Synchronous clock output for DSP, DIR, DAC
Data but width change input
When in single chip mode: L (16 bit)
Processor mode select
Low: Single chip mode
Volume rotary encoder B
Volume rotary encoder A
Reset input
Oscillation circuit output
Microprocessor GND
Oscillation circuit input
Microprocessor power supply
HDMI CEC input
Remote control pulse input
HDMI mute input
H: Mute
Interrupt input from HDMI Rx
MIC detection
L: MIC available
HDMI Tx +5V power regulator control
H: Regulator ON
RX-V371/HTR-3064
O
Low Fix
O
Low Fix
O
Low Fix
IO
Low Fix
RDS_RDY
TMR
Power off MCU sleep
O
Low Fix
O
Low Fix
O
Low Fix
IO
Low Fix
1 TB4IN
P8_7
P8_6
N_RESET
XOUT
VSS
XIN
VCC1
NMI
N_INT2
Full on
Interrupt input from DSP
AC power detection
L: Power down
FL driver reset
FL driver chip select
HDMI Rx/Tx I2C SCL output
HDMI Rx/Tx I2C SDA input/output
Synchronous data input/output for tuner I2C
Synchronous clock output for tuner I2C
HDMI Rx reset
HDMI Tx reset
57
RX-V371/HTR-3064
RX-V371/HTR-3064
Pin
No.
58
Port Name
Function
Name
(P.C.B.)
37 P5_7
N_DIR_RST
38 P5_6
N_DIR_CS
39 P5_5
N_E8A_EPM
40 P5_4
DIR_WCK
41 P5_3
DIR_SDO
42 P5_2
N_ADC_PDN
43 P5_1
N_DAC_CS
44 P5_0
N_E8A_CE
45 P4_7
N_DSP_RDY
46 RXD7
RDS_MISO
47 CLK7
RDS_SCK
48 P4_4
N_TUN_TUND
49 P4_3
N_TUN_ST
50 P4_2
DSP_FMT
51 P4_1
N_DSP_CS
52 P4_0
N_DSP_RST
53 P3_7
N_E2R_CS
54 P3_6
N_RDS_RST
55 P3_5
R2A_MOSI
56 P3_4
R2A_SCK
57 P3_3
I_PRT
58 P3_2
SP_IMP
59 P3_1
N_CNPT_PS
60 VCC2
VCC2
61 P3_0
N_VO_MT
62 VSS
VSS
63 P2_7
N_HP_DET
64 P2_6
IPD_APDT
65 N_INT7
N_IPD_DET
Full on
Power off MCU sleep
O
Low Act
O
Low Act
II
O
Low Fix
O
Low Fix
II
I
I
O
Low Act
O
Low Act
I+
I+
O
Low Fix
O
Low Fix
I+
I+
IO
I+
IO
Low Fix
I+
I+
I+
O
High Act
O
Low Act
O
High Act
O
Low Act
O
Low Act
O
AC off
I-
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Act
O
Low Fix
O
Low Fix
O
Low Fix
I-
O
Low Fix
O
Low Fix
IO
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
I+
O
Low Fix
IO
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Act
O
Low Fix
O
Low Fix
O
Low Fix
I-
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Act
O
Low Fix
O
Low Fix
O
Low Fix
I-
O
O
O
O
Low Fix
Low Fix
Low Fix
O
Low Fix
MCU
O
Low Fix
MCU
O
Low Fix
O
Low Fix
MCU
O
Low Fix
MCU
O
Low Fix
O
Low Fix
MCU
O
Low Fix
MCU
O
Low Fix
O
O
Low Act
MCU
O
Low Act
MCU
I+
O
Low Fix
O
Low Fix
II
I
O
Low Fix
O
Low Fix
I+
I+
IO
Low Fix
I+
I+
I-
I-
I-
I-
IRQ
IRQ
IRQ
O
Low Fix
Detail of Function
DIR reset
DIR chip select
DIR_WCK input for CDDA writing
DIR_SDO input for CDDA writing
ADC power down
DAC chip select
DSP ready input
RDS data input
RDS clock output
Tuner tuned input
Tuner stereo input
DSP full mute output
H: Mute
DSP chip select
DSP reset
EEPROM chip select
RDS reset
Electronic vol pattering synchronous data output
Electronic vol pattering synchronous clock output
Overcurrent protection detection
Speaker impedance changing relay control /
At 8 ohm: Low (Relay off, B voltage high)
At 6 ohm and temperature rise: High (Relay ON, B
voltage low)
Component video selector IC power save
Microprocessor power supply
Composite video selector mute
Microprocessor GND
Headphone detection
L: Headphone available
iPod accessory power detection / Low while iPod
booting (about 2 seconds). Execute identification
when booting seems to have completed. Change to
constant input to prevent pulling between high output
of iPod and Low Fix of microprocessor output.
iPod detection
When inserting an iPod into the DOCK H to L
RX-V371/HTR-3064
Pin
No.
Port Name
Function
Name
(P.C.B.)
N_DIR_INT
67 P2_3
HPRY
68 P2_2
SPRY_S
69 P2_1
SPRY_C
70 P2_0
SPRY_F
71 P1_7
3D_PON
72 P1_6
5D_PON
73 N_INT3
PSW_DET
74 P1_4
VSEL3
75 TXD6
IPD_MOSI
76 RXD6
IPD_MISO
77 P1_1
VSEL2
78 P1_0
VSEL1
79 P0_7
N_SB_MT
80 P0_6
N_SW_MT
81 P0_5
N_S_MT
82 P0_4
N_C_MT
83 P0_3
N_F_MT
84 P0_2
PWR_RY
85 P0_1
N_FCT
86 AN0_0
(no use)
87 AN7
DC_PRT
88 AN6
AMP_OLV
89 AN5
THM1_PRT
90 AN4
THM2_PRT
91 AN3
KEY2
92 AN2
KEY1
93 AN1
PS_PRT
94 AVSS
AVSS
Power off MCU sleep
IRQ
I
O
High Act
O
High Act
O
High Act
O
High Act
O
High Act
O
High Act
IRQ
O
AC off
O
Low Act
O
Low Act
O
Low Act
O
Low Act
O
Low Act
O
High Act
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
IRQ
O
Low Fix
O
Low Fix
I+
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
IRQ
O
Low Fix
O
Low Fix
I+
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
I
O
Low Fix
O
Low Fix
I+
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
O
Low Fix
I
I
I
I
AD
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
I
AD standby
MCU
MCU
MCU
SO
SI
O
O
AD
AD
AD
AD
AD
AD
AD
MCU
I
Detail of Function
DIR interrupt input
Headphone relay control
Speaker relay control (Surround)
H: Relay ON
Speaker relay control (Center)
H: Relay ON
Speaker relay control (Front)
H: Relay ON
PCB DIGITAL +3.3D, +1.2D regulator control
H: Regulator ON
PCB DIGITAL +5D regulator control
H: Regulator ON
Power system switch (Power, Scene) detection
Video input select
Synchronous data output for iPod
Synchronous data input for iPod
Video input select
Video input select
Mute control (Surround back)
* Spare to use for HD audio when necessary
RX-V371/HTR-3064
66 N_INT6
Full on
Mute control (Subwoofer)
Mute control (Surround)
Mute control (Center)
Mute control (Front)
Power relay control
H: ON
FCT detection
H: Product mode L: FCT mode
Power AMP DC detection
Power AMP output level detection
Temperature detection 1
Temperature detection 2 (U, C models)
KEY2 AD value taken in
KEY1 AD value taken in
PS protection detection
Microprocessor GND
59
RX-V371/HTR-3064
Pin
No.
Function
Name
(P.C.B.)
Port Name
95 AN0
IPD_TYPE
96 VREF
97 AVCC
98 SIN4
VREF
AVCC
E2R_MISO
99 SOUT4
FLD_MOSI
100 CLK4
FLD_SCK
Full on
AD
MCU
MCU
SI
SO
SO
Power off MCU sleep
AC off
Detail of Function
I
I
I
AD standby AD standby AD standby
MCU
MCU
MCU
MCU
MCU
MCU
SI
O
SI
SO
O
SO
Low Fix
SO
O
SO
Low Fix
DOCK discriminate
AD reference voltage
Microprocessor power supply
Synchronous data input for EEPROM
FL driver/Synchronous data output for EEPROM
FL driver/Synchronous clock output for EEPROM
RX-V371/HTR-3064
Key detection for A/D port
Key input (A/D) pull-up resistance 10 k-ohms
Ohm
0
V
0 – 0.15
A/D value
(3.3 V=255)
0 – 11
12 – 37
38 – 64
KEY1
(92 pin)
STRAIGHT
TUNING
>>
Ohm
0
+ 1.0 k
V
0 – 0.15
A/D value
+ 1.5 k
+ 1.8 k
+ 2.2 k
+ 3.3 k
1.15 – 1.46
1.47 – 1.79
1.80 – 2.12 2.13 – 2.40 2.41 – 2.91
65 – 88
89 – 113
114 – 139
140 – 164
165 – 186
187 – 226
TUNING
<<
AM
FM
PRESET
>
PRESET
<
MEMORY
INFO
+ 1.0 k
+ 1.5 k
+ 1.5 k
+ 2.2 k
+ 3.3 k
+ 4.7 k
(22 k + 33 k)
1.25 – 1.53
1.54 – 1.84
1.84 – 2.10
2.11 – 2.33 2.34 – 2.54 2.54 – 2.71
97 – 119
120 – 142
143 – 163
164 – 181
INPUT
INPUT
>
<
0.15 – 0.42 0.43 – 0.70 0.71 – 0.97 0.98 – 1.24
0 – 11
12 – 32
33 – 54
KEY2
SCENE
SCENE
SCENE
SCENE
(91 pin)
RADIO
CD
TV
BD/DVD
(3.3 V=255)
60
+ 1.0 k
0.15 – 0.48 0.49 – 0.82 0.83 – 1.14
55 – 75
76 – 96
PROGRAM PROGRAM
>
<
+ 4.7 k
+ 8.2 k
+ 10.0 k
–
22.0 k
33.0 k
182 – 197
198 – 209
(Power)
TONE
CONTROL
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
■ BLOCK DIAGRAM
DIGITAL
r 4FFQBHF→
SCHEMATIC DIAGRAM
I2C2
29-32
HDMI IN 1
33-36
HDMI IN 2
2
Port0
21
22
107
IC201
Port1
N_HRX_RST
HDM_INT
HDM_MUT
25
N_HＴX_RST
IC202
Digital Video Data
37-40
HDMI IN 3
Port2
HDMI RX
HDMI OUT
HDMI Tx
SiI9233
SiI9134
I2S
41-44
HDMI IN 4
Port3
I2S
SPDIF
CEC
(Component)
MAIN
r 4FFQBHF→
SCHEMATIC DIAGRAM
AV1
4
XL201
27MHz
HDMI SPDIF
HDMI ARC
IC41
(Optical)
AV2
(Component)
Component
Selector
NJM2586AM
(Component)
3
CEC
IC204
5
2,4
23
5VSEL1
5VSEL2
(Optical)
N_CPNT_PS
IC43
IC42
17
Composite
Selector
TC74HC4051
3
(Composite)
20
(Composite)
(Coaxial)
(Composite)
(Analog)
HDMI I2S
AV5
41
(Analog)
SPDIF
AUDIO1
AUDIO2
(Analog)
VAUX
DOCK
(U, C, R, K, A, B, G, F, L, S models)
OPERATION
r 4FFQBHF →
SCHEMATIC DIAGRAM
AM/FM Tuner
6
YPAO MIC
(R, K, A, B, G, F, L, S models)
FL display
2
49 50
26 DA_FR 91
R2A_SCK 49,50
R2A_MOSI
DAC
D70YE101BRFP266
135 SD3
PCM1681DBQR
53
VOLUME
KEY1
KEY2
PSW_DET
8
10
16
Mute
15
SPRY_F
18
FRONT R
Power
amplifier
STK433-330F
RY4
6
CENTER
N_C_MT
SPEAKERS
SPRY_C
14
15
IC2
11
Power
amplifier
STK433-130F
N_S_MT
PCM1803DBR
Mute
SPI3
RY3
6
SURROUND L
SPRY_S
4
SURROUND R
ANALOG BYPASS
3
IC223
RDS
LC72725KM
(B, G, F models)
15
16
2
1
HDM_INT
HDM_MUT
REM_IN
PWS_DET
N_RDS_RST
RDS_SCK
RDS_MISO
RDS_RDY
IC222
EEPROM 32kbit
R1EX25032ASA00A
N_DIR_INT
IPD_DET
1,8
N_E2P_CS
N_PDET
N_DSP_INT
RDS_RDY
SPI4
VOL_RA
VOL_RB
Mute
22
Mute
N_FLD_RST
N_FLD_CS
Remote Control Sensor
92
FRONT L
IC1
ADC_PDN
10
N_MIC_DET
22 DA_C
Selector
and
E-Volume
R2A15220FP
22
4
11
N_F_MT
IC262
ADC
1
UART6
IPD_TYPE
IPD_DET
IPD_APDT
(Analog)
20 DA_SL 94
134 SD2
IC21
90
19 DA_SR 95
Mute
20
21 DA_SW 93
(Composite)
(Analog)
I2C0
N_TUN_ST
N_TUN_TUND
27 DA_FL
IC263
IC21
Selector
and
E-Volume
R2A15220FP
(Analog)
(RDS)
131 SD1
AUDIO DSP
(Analog)
(Analog)
MAIN
r 4FFQBHF→
SCHEMATIC DIAGRAM
RY1
N_DIR_INT
130 SD0
REM_IN
Front Panel Keys
N_DIR_RST
35
IC241
(Composite)
5
IC261
DIR
LC89058WD
AV OUT
Speaker Relay
14
120
107
121
105
4
7
HDMI I2S (Multi Ch)
(Composite)
R2A_MOSI
N_VO_MT
R2A_SCK
5VSEL1
5VSEL2
5VSEL3
(Optical)
MONITOR OUT
(VIDEO)
(Composite)
33
9,10,11
N_DAC_CS
AV4
IC43
N_DSP_RST
N_DSP_CS
N_DSP_INT
N_DSP_RDY
DSP_FMT
AV3
MONITOR OUT
(COMPONENT VIDEO)
IPD_TYPE
PS_PRT
KEY1
KEY2
THM2_PRT
THM1_PRT
AMP_0LV
DC_PRT
DEST
18
17
16
66
65
23
21
1
95
93
92
91
90
89
88
87
86
<Interrupt>
NMI
/INT0
/INT1
/INT2
/INT3
/INT4
IC221
/INT5
/INT6
/INT7
MICROPROCESSOR
<Timer>
TA2IN
TA3IN
TB4IN
<AD port>
AN0
AN1
AN2
AN3
AN4
AN5
AN6
AN7
AN0_0
M16C/64A
R5F364AMNFB
ROM:512K Byte
RAM: 31k Byte
Clock : 20MHz
<Serial>
E8A
I2C2
HDMI Rx/Tx
SPI3
DSP/DAC/DIR
SPI4
FL Driver/EEPROM
Serial5
DSP
UART6
iPod
85
15
SP_IMP
AMP_LMT
N_SW_MT
I_PRT
DC_PRT
13
XL221
20MHz
AMP block
and
Heatsink
and
Main Power Supply
RY2
HEADPHONE
HPRY
N_HP_DET
THM1_PRT
THM2_PRT
SW151
Main Power
Supply
(Main Trans)
MODEL
PWR_RY
CEC
N_CPU_RST
N_PDET
11
SUBWOOFER OUT
Mute
Tuner
I2C0
NMI
1
N_SW_MT
UART1
<PIO>
P0_1
IC27
Standby
Power Supply
(Sub-trans)
AC IN
OPERATION
r 4FFQBHF →
SCHEMATIC DIAGRAM
61
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
■ PRINTED CIRCUIT BOARDS
1
POINT A XL201 (Pin 5 of IC201)
POINT C 1 / IC221 (97 pin, +3.3M), 2 / IC221 (10 pin, N_RESET)
POINT B XL221 (Pin 11 of IC221)
POINT D XL261 (Pin 29 of IC261)
DIGITAL (Side A)
2
No replacement part available.
DOCK
HDMI 1
(BD/DVD)
HDMI OUT
D
CB201
CB205
OPERATION (4)
IC221 1
(+3.3M)
IC221 2
(N_RESET)
IC221 2
(N_RESET)
AC POWER ON
(Connect the power cable)
No replacement part available.
U, C, R, K, A, B, G, F, L, S models
3
IC221 1
(+3.3M)
HDMI 2
HDMI 3
CB202
CB203
AC POWER OFF
(Disconnect the power cable)
AC POWER ON
(Connect the power cable)
HDMI 4
A
CB204
CB261
(CB196)
CB223
24
108
36
37
25
26
50
144
1
9
51
8
1
48
1
11
109
144
1
AM/FM TUNER
76
73
72
37
36
CB222
20
IC241
1
1
5
8
1
100
109
108
25
26
72
73
IC263
15
IC222
4
28
1
7
IC267
14
8
76
1
OPERATION (4)
(CB1)
51
25
1
4
IC265
8
5
1
4
IC264
8
5
48
(CB195)
6
CB221
N_PDET
PWR_RY
N_CPU_RST
+3.3M
MGND
+9T
AGND
+5A
+5I
IGND
+7D
DGND
THM1_PRT
THM2_PRT
+3.3M
DGND
+3.3D
KEY1
KEY2
N_FLD_CS
FLD_MOSI
FLD_SCK
N_FLD_RST
PSW_DET
REM_IN
VDL_RA
VDL_RB
N_MIC_DET
reserved
CB262
(CB131)
(CB101)
7
62
B
No replacement part available.
OPERATION (2)
OPERATION (1)
TUL
TUE
SW_MT
R2A_SCK
DGND
I_PRT
AMP_LMT
N_HP_DET
SPRY_S
SPRY_F
NC
MAIN (1)
50
75
IC243
TUR
SB_MT
R2A_MOSI
DGND
DC_PRT
AMP_OLV
TRANS_RY
HPRY
SPRY_C
PS_PRT
IC221
14
24
SDA
TUNED
STEREO
VDD SEL
+9V
GND
1
IC262
1
SCL
S-METER
LOUT
ROUT
DETOUT
75
100
36
37
16
IC223
IC201
13
12
CB264
5
25
IC261
10
ADR
ADL
AGND
DA_FL
DA_FR
DA_C
AGND
DA_SW
DA_SL
DA_SR
(DA-SBL)
(DA-SBR)
AGND
F_MT
C_MT
S_MT
+5A
reserved
B, G, F models
IC202
4
IC204
4 5
8
1
CB263
+5D
AV1_D
AV2_D
DGND
AV3_D
AV4_D
DGND
IPR
IPL
IPE
IPV
IPVE
5VSEL1
5VSEL2
5VSEL3
N_VO_MT
N_CNPT_PS
DGND
1
2
C
• Semiconductor Location
Ref no. Location
D2022
D4
D2023
G4
D2202
G5
D2601
F5
D2602
F5
IC201
F4
IC202
E4
IC204
D3
IC221
G5
IC222
F5
IC223
H4
IC241
D5
IC243
E6
IC261
D4
IC262
C4
IC263
C5
IC264
F6
IC265
F6
IC267
E5
Q2009
G4
Q2201
C5
Q2202
C6
Q2203
C6
Q2205
H6
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
DIGITAL (Side B)
2
U, C, R, K, A, B, G, F, L, S models
3
B, G, F models
4
5
• Semiconductor Location
4
4
IC266
5
IC203
1
27
1
IC242
28
6
4
54
3
1
3
3
IC268
5
5
1
Ref no. Location
D2201
G5
D2203
G5
D2204
G5
D2607
F6
D2610
E5
IC203
E5
IC242
E6
IC266
F5
IC268
F5
Q2001
G3
Q2002
G3
Q2003
G3
Q2004
F3
Q2005
F3
Q2006
F3
Q2007
E3
Q2008
E3
Q2206
H4
7
63
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
OPERATION (1)
(Side A)
2
DIGITAL (CB221)
OPERATION (7)
(CB171)
Remote control sensor
CB102
CB104
AXR
E
AXL
VE
AUX-V
+12
MIC
E
-12
CB103
3
CB101
DGND
N_MIC_DET
VOL_RB
VOL_RA
REM_IN
PSW_DET
N_FLD_RST
FLD_SCK
FLD_MOSI
N_FLD_CS
KEY2
KEY1
+3.3S
DGND
+3.3M
SW116
SW113
TUNING
OPERATION (4)
(CB193)
SW111
SW109
AM
FM
SW105
SW107
SW103
PRESET
MEMORY
(CB136)
INFO
4
MG
VRB
VRA
+3.3S
SCENE
OPERATION (6)
SW117
SW114
SW112
RADIO
CD
TV
BD
DVD
(CB145)
5
JK101
PJ101
SW110
SW108
SW118
STRAIGHT
VIDEO AUX
R AUDIO
6
7
64
L
VIDEO
PORTABLE
SW106
PROGRAM
TONE CONTROL
F1
VP
F2
OPERATION (2)
SW101
CB106
SW119
FG
PSW
MG
N_MIC_DET
-12
E
MIC
+12
SW104
SW102
INPUT
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
OPERATION (1)
(Side B)
2
33 32
10
1
48
49
IC
3
17
16
64 1
4
5
6
• Semiconductor Location
7
Ref no. Location Ref no. Location
D1001
H3
Q1002
F3
D1002
H3
Q1003
F3
D1003
D5
Q1004
F3
D1004
D5
Q1005
G3
D1005
C5
Q1006
H3
D1006
C5
Q1007
F3
IC101
G3
Q1008
G3
Q1001
F3
65
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
OPERATION (2)
(Side A)
5 k-ohms
U, C models
U, C models
10 W
OUT COM IN
IC132
OUT COM IN
IC135
OUT COM IN
IC133
OUT COM IN
IC134
4
1
IC131
2
U, C models
13
6
CB
AC6
VP
AC6
OPERATION (1)
(CB102)
CB131
3
MG
ACDET
PRY
S9
4
5 k-ohms
10 W
-VP
PS_PRT
-12A
AGND
+12A
NC
AC5
AC5
AC4
AC4
AC3
AC3
AC2
E
AC2
N_PDET
PWR_RY
N_CPU_RST
+3.3M
MG
9T
AG
+5A
+5I
IGND
+7D
DGND
THM1_PRT
THM2_PRT
10 W
5 k-ohms
CB132
DIGITAL (CB262)
5 k-ohms
10 W
OPERATION (3)
POWER TRANSFORMER
(Side A)
MAIN (1)
(CB2)
U, C, T, K, A, B, G, F, L models
R, S models
Notes)
Safety measures
• Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such
as wearing insulating gloves.
• Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge remains and a
high voltage continues to exist there. Before starting any repair work, connect a discharging resistor (5 k-ohms/10 W) to the terminals
of each capacitor indicated below to discharge electricity. The time required for discharging is about 30 seconds per each.
C1317-1320 on OPERATION (2) P.C.B.
5
U, C, T, K, A, B, G, F, L models
R, S models
CB154
Ref no. Location Ref no. Location
D1304
G2
IC132
F2
D1307
C2
IC133
G2
D1308
D3
IC134
G2
D1309
D2
IC135
G2
D1502
H6
Q1303
G3
D1503
G5
Q1501
H7
D1504
G5
Q1502
H7
D1505
H5
Q1503
H7
D1506
H5
Q1504
H6
D1507
H5
Q1505
H6
IC131
H2
6
7
AC IN
51
B1
MG
ACDET
PRY
S9
C
• Semiconductor Location
R, S models
CB155
U, C, T, K, A, B, G, F, L models
CB152
R, S models
66
CB153
POWER TRANSFORMER
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
OPERATION (2)
(Side B)
U, C models
R, T, K, A, B, G, F, L, S models
2
U, C models
3
U, C models
4
OPERATION (3)
5
6
(Side B)
• Semiconductor Location
Ref no. Location
D1301
H2
D1302
H2
D1303
H2
D1305
H2
D1306
H3
D1311
C2
D1312
C2
D1313
C2
D1314
C2
D1501
H6
D1508
H5
D1509
G5
D1510
H6
Q1301
I2
Q1302
H2
Q1304
H3
7
R, S models
67
7
68
6
CB196
DIGITAL (CB263)
ADR
ADL
AGND
DA-FL
DA-FR
DA-C
AGND
DA-SW
DA-SL
DA-SR
(DA-SBL)
(DA-SBR)
AGND
F_MT
C_MT
S_MT
+5A
NC
DGND
N_CNPT_PS
N_VO_MT
5VSEL3
5VSEL2
5VSEL1
IPVE
IPV
IPE
IPL
IPR
DGND
AV4_D
AV3_D
DGND
AV2_D
AV1_D
+5D
5VSEL_3
IPV
AUXV
+5A
5VSEL_1
N_VO_MT
IPVE
AUXE
-12A
5VSEL_2
+5D
AV1_D
AV2_D
DG
AV3_D
AV4_D
DG
AGND
ADL
ADR
IPE
IPR
IPL
AGND
MIC
AGND
AUXR
AUXL
AUXE
DAFL
DAFR
AGND
DAC
DASW
AGND
DASL
DASR
AGND
(DASBL)
(DASBR)
AGND
F_MT
C_MT
S_MT
+12A
-12A
D
E
MAIN (1)
(CB21)
F
CB192
CB191
CB194
CB195
MAIN (2)
(CB41)
DIGITAL (CB264)
G
(Side A)
AGND
+12V
VAUXE
AUXE
-12V
MIC
+3.3S
VRA
VRB
MG
CB145
AG
CPNT_N_PS
OPERATION (4)
C
HPL
HPE
HPR
N_HP_DET
CB166
5
B
CB193
AG
A
H
I
OPERATION (5)
MAIN (1)
(CB22)
3
MAIN (1)
(W1)
4
OPERATION (6)
(Side A)
VAUX
AUXL
AUXR
OPERATION (1)
(CB104)
OPERATION (1)
SW145
(CB106)
VOLUME
J
RX-V371/HTR-3064
1
(Side A)
PHONES
SILENT CINEMA
2
JK166
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
OPERATION (4)
(Side B)
OPERATION (5)
(Side B)
OPERATION (6)
(Side B)
2
3
4
5
6
• Semiconductor Location
7
Ref no. Location
D1651
I3
D1652
H3
D1653
H3
69
A
B
C
D
E
F
G
H
RX-V371/HTR-3064
1
OPERATION (7)
OPERATION (8)
(Side A)
R, K, A, B, G, F, L, S models
FG
PSW
MG
N_MIC_DET
-12
E
MIC
+12
3
CB171
2
OPERATION (1)
(CB103)
JK171
SW171
YPAO MIC
(power)
4
OPERATION (9)
5
6
7
70
(Side A)
(Side A)
I
J
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
OPERATION (7)
OPERATION (8)
(Side B)
(Side B)
R, K, A, B, G, F, L, S models
1
4
IC102
2
6
5
3
4
• Semiconductor Location
Ref no. Location
D1701
D3
D1702
D3
D1703
C3
IC102
D2
OPERATION (9)
(Side B)
5
6
7
71
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
SPEAKERS
R
+/-
MAIN (1)
(Side A)
AV 1
AV 2
AV 3
AV 4
OPTICAL COAXIAL COAXIAL OPTICAL
(TV)
(CD)
AV 5
AV OUT
AUDIO1
AUDIO2
AUDIO
OUT
L/R
L/R
L/R
L/R
L/R
PJ21
L
+/-
SURROUND CENTER
R
L
SUBWOOFER
OUT
+/-
PJ24
FRONT
+/-
+/-
PJ22
2
PJ26
OPERATION (4)
(CB192)
CB3
E
ACL
CB1
ACL
POWER TRANSFORMER
W1
OPERATION (4)
(CB191)
10 W
5 k-ohms
CB2
10 W
4
E
CB22
AUXE
DAFL
DAFR
AGND
DAC
DASW
AGND
DASL
DASR
AGND
(DASBL)
(DASBR)
AGND
F_MT
C_MT
S_MT
+12A
-12A
ACH
5 k-ohms
3
ACH
CB21
+5D
AV1_D
AV2_D
DG
AV3_D
AV4_D
DG
AGND
ADL
ADR
IPE
IPR
IPL
AGND
MIC
AGND
AUXR
AUXL
5
• Semiconductor Location
IC2
IC1
1
15
Notes)
Safety measures
• Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such
as wearing insulating gloves.
• Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge remains and a
high voltage continues to exist there. Before starting any repair work, connect a discharging resistor (5 k-ohms/10 W) to the terminals
of each capacitor indicated below to discharge electricity. The time required for discharging is about 30 seconds per each.
C46, 47 on MAIN (1) P.C.B.
7
72
DIGITAL (CB222)
TUL
TUR
TUE
(SB_MT)
SW_MT
R2A_MOSI
R2A_SCK
DGND
DGND
DC_PRT
I_PRT
AMP_OLV
AMP_LMT
TRANS_RY
N_HP_DET
HPRY
SPRY_S
SPRY_C
SPRY_F
PS_PRT
NC
19
HPL
HPG
HPR
N_HP_DET
1
+12A
AGND
-12A
PS_PRT
-VP
6
OPERATION (2)
(CB134)
OPERATION (5)
(CB166)
Ref no. Location Ref no. Location
D1
H5
IC1
F6
D2
H6
IC2
C6
D9
G3
Q1
I6
D10
D5
Q2
H6
D11
E5
Q3
H5
D12
H3
Q4
I6
D13
G4
Q5
I5
D14
H3
Q6
H5
D15
G4
Q7
G5
D16
F5
Q8
E5
D17
F4
Q9
C5
D18
I2
Q10
F5
D19
H5
Q11
G5
D20
I2
Q12
E5
D22
I3
Q21
I2
D201
E4
Q22
E5
D202
E4
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
MAIN (1)
(Side B)
2
1
7
IC22
8
3
4
5
14
1
IC23
8
4
81 80
1
IC25
8
100
1
21
5
IC
4
5
51
50
1
IC24
8
30 31
4
8
1
5
IC27
4
5
• Semiconductor Location
6
7
Ref no. Location Ref no. Location
D3
C5
Q16
H3
D4
G5
Q17
G3
D5
E5
Q18
H3
D6
C5
Q19
G3
D7
G5
Q20
G3
D8
F5
Q23
I3
IC21
D4
Q24
I3
IC22
D2
Q201
B5
IC23
B3
Q202
B6
IC24
B4
Q203
B5
IC25
C3
Q204
B5
IC27
C4
Q205
B5
Q13
G3
Q208
F3
Q14
G3
Q209
F3
Q15
H3
73
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
MAIN (2)
MAIN (3)
(Side A)
(Side A)
R, S models
COMPONENT VIDEO
2
VIDEO
MONITOR OUT
AV1
AV2
PR/PB/Y
PR/PB/Y
PR/PB/Y
AV3
AV 4
AV 5
AV
OUT
MONITOR
OUT
3
OR
RE
220–240V
YE
110–120V
VI
VOLTAGE
SELECTOR
POWER TRANSFORMER
4
AG
AG
N_CPNT_MT
5V_SEL1
5V_SEL2
+5A
-12A
AUXV
AUXE
IPV
IPVE
5V_SEL3
N_VO_MT
OPERATION (4)
(CB194)
5
6
7
74
• Semiconductor Location
Ref no. Location
Q401
B3
MAIN (4)
(Side A)
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
MAIN (2)
MAIN (3)
(Side B)
(Side B)
R, S models
2
16
3
9
36
IC42
24
13
1
1
8
1
IC41
19
IC43
18
12
4
• Semiconductor Location
MAIN (4)
(Side B)
Ref no. Location
D401
B3
IC41
C3
IC42
D3
IC43
E3
5
6
7
75
RX-V371/HTR-3064
■ PIN CONNECTION DIAGRAMS
• Diodes
• ICs
BD9325FJ
D70YE101BRFP266
SiI9233ACTU
KIA7805API
108
KIA7812API
KIA7912PI
1N4003S
1SS133
1SS176
1SS270A
73
72
109
1SS355
COM
144
OUT
COM
OUT
IN
KDS160-RTK
OUT
Anode
RB051LA-40
RB500V-40
RB501V-40
MTZJ4.7A
MTZJ6.8C
MTZJ10B
MTZJ39D
Anode
Anode
37
1
LA73050-TLM-E
36
LC72725KM-UY-TLM-E
LC89058WD-E
–
AC
AC
M12L64164A-5TG
24
Cathode
Cathode
Cathode
+
13
25
12
36
1
54
28
1
27
RS203M-B-C-J80
TS6P03G 6.0A 200V
UDZS4.7B
UDZ5.1B
UDZS5.6B TE-17 5.6V
UDZS9.1B
18
8
36
16
1
1
M66003-0131FP-R
48
37
MX29LV160DBTI-70G
Anode
48
NJM2388F33
+
NJM2586AM (TE2)
32
64
17
1
48
16
NJM2830U1-05 (TE1)
NJM2884U1-18 (TE1)
2
1
NJM2867F3-05
1
NJM4565M (TE1)
1. VIN
2. VOUT
3. GND
4. ON/OFF CONTROL
24
1
PCM1681PWPR
2N5551C-AT
2SA1576A
2SC1815 Y
2SC1815 Y TP
2SA1708
2SC4081 T106
PCM1803DBR
C
C
3
8
4
E
20
28
1
1
E
E
10
14
5
CONTROL (Active High)
GND
NC
VOUT
VIN
C
B
B
B
E
CE
C
B
E
B
CB
1
2SD2704 K
1
R5F364AMNFB
SiI9134CTU
R1EX25032ASA00A
STK433-130F-E
KRA104S-RTK
KRC102S-RTK
KRC104S-RTK
STK433-330F-E
C
8
4
B
19
15
1
1
R2A15220FP
80
100
26
1
TC74HC4051AFEL
TC7WHU04FK
TC74VHCT08AFT
TC74VHCU04FT
51
81
50
100
31
25
1
30
8
4
8
16
7
14
1
1
1
KTA1046-Y-U/P
μPA672T-T1-A
KTC3875S
C
E
50
KRC102M-AT
OUT
51
76
1
Cathode
• Transistors
2N5401C-AT/P
2SA1015-Y
4
4
75
–
AC
1
5
1.
2.
3.
4.
5.
+
AC
24
25
4
3
–
AC
AC
33
49
12
76
Cathode
Cathode
Cathode
GND
IN
IN
1
Anode
Anode
KBP103G 1.0A 200V
4
HZU3.3B2 TRF-E
HZU4.3B3 TRF-E
Anode
Anode
Cathode
8
1T2
4
E
COMMON
IN
E
CB
BC
B
E
6
3
1
1. Source 1
2. Gate 1
3. Drain 2
4. Source 2
5. Gate 2
6. Drain 1
(S1)
(G1)
(D2)
(S2)
(G2)
(D1)
A
B
C
D
E
F
G
H
I
J
L
K
M
N
RX-V371/HTR-3064
SCHEMATIC DIAGRAMS
DIGITAL 1/4
1
HDMI 1
(BD/DVD)
HDMI OUT
0
0
5.1
0
0
4.9
0
4.9
0
0
0
3.3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3.3
0
0
0
0
CB205
0
0
0
0
0
0
0
0
0
0
0
0
0
3.3
0
0
0
CB201
0
0
0
0
0
0
0
0
0
0
0
0
0
3.3
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3.3
0
0
0
0
0
0
0
0
HDMI 2
CB202
0
HDMI 3
CB203
0
HDMI 4
CB204
2
0
0
0
0
3
0
0
0
0
0
0
0.6
0
0
0
0
0
0
0.6
0
0
0
0.6
0
0.6
IC204
2.6
IC204
2.1
0.4
IC204
0
5.0
5.0
IC204
0
4
4.9
5.1
0
0
0
1.3
0
0
0
0
0
0
0
0
0
0
0
0
0
3.4
0
0
0
0
0
0
0
0
1.3
0
0
0
0
0
0
3.4
0
5
0
to DIGITAL 4/4
3.4
1.3
to DIGITAL 2/4
3.3
3.4
3.4
1.9
0
0
1.9
0
0
1.9
0
0
0
1.9
0
0
0
3.4
0
0
1.9
0
2.2
0
2.2
0
2.2
2.2
0
2.2
2.2
0
2.2
2.2
2.2
2.2
IC201
3.4
0
0
3.4
0
1.9
3.4
1.9
IC202
0
1.3
3.4
0
3.4
2.2
0
0.4
2.2
2.2
0
3.0
2.2
2.2
0
3.4
2.2
2.2
0
5.0
2.2
2.2
0
0
2.2
2.2
0.6
2.2
2.2
0
2.2
2.2
2.2
2.2
0
2.2
No replacement part available.
0
0
0
0
0
0
0
0
1.9
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
0
0
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
3.4
2.2
3.4
1.3
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
1.3
3.4
2.2
2.2
2.2
2.2
2.2
2.2
2.2
0
3.4
0
0.6
0
0
0.6
0
0
0
1.9
2.2
0
0
2.2
0
0
0
0
0.6
3.4
0
2.2
2.2
3.4
7
HDMI TX
2.2
2.2
3.3
to DIGITAL 2/4
0
2.2
3.4
0
0
1.9
2.2
6
3.4
0
0
1.3
0
3.4
0
3.4
3.4
2.2
3.3
3.3
0
0
0
HDMI RX
0
3.4
4.9
0
0
3.1
3.3
2.5
0
A
1.3
4.9
0
3.0
0
0
3.0
0
1.6
0
4.9
0
1.6
8
POINT A XL201 (Pin 5 of IC201)
9
IC202: SiI9134CTU
HDMI transmitter
INT HPD
10
VSYNC
HSYNC
IDCK
DE
D[35:0]
S/PDIF
MCLK
WS
SCK
SD[3:0]
DL[3:0]
DR[3:0]
CI2CA
Slave
Video
Data
Capture
Logic/DE
Generator
Audio
Capture
Logic
Registers
and
Configuration
Logic
E-DDC
Master
HDCP
Encryption
Engine
DSCL
DSDA
HDCP Keys
EEPROM
EXT_SWING
YCbCr to RGB
Color Space
Converter/
4:2:2 to 4:4:4
Converter
XOR
Mask
HDMI 1.3
TMDS
Core
Tx0
Tx1
Tx2
TxC
R0XC+
R0XCR0X0+
R0X0R0X1+
R0X1R0X2+
R0X2-
Embedded
HDCP Keys
HPD0
HPD1
HPD2
HPD3
Hot Plug
Controller
Configuration
and Status
Registers
3.3
Video Processing
Video
HDCP
Unmask
Color
Space
Converter
Deep
Color
Video
Output
Format
Up/Down
Sampling
HDMI
Receiver
Mux
A/V Split
HDMI
Decode
ODCK
Q[35:0]
DE
HSYNC
VSYNC
EVNODD
Auto Video Configuration
Audio Processing
Audio Clock
Regeneration
R0XC+
R0XCR0X0+
R0X0R0X1+
R0X1R0X2+
R0X2-
SCDT
Logic
Audio
HDCP
Unmask
APLL
Auto
Audio/
Exception
Audio Output
S/PDIF
Output
I2S/
DSD
Output
SPDIF
SCK/DCLK
WS
SD[3:0]
DR[3:0]
DR[3:0]
MUTEOUT
XTALIN
XTALOUT
MCLK
4 VOUT
VIN 5
CONTROL 1
VCC
1Y
3A
2Y
8
7
6
5
Thermal
Protection
Bandgap
Reference
SCDT
Reset
Logic
IC204: TC7WHU04FK
Triple inverter
IC203: NJM2884U1-18 (TE1)
Low dropout voltage regulator
R0PWR5V
R1PWR5V
R2PWR5V
R3PWR5V
RESET#
1.9
IC203
INT
3.3
RPI
Registers
and State
Machine
EDID
NVRAM
1.9
SRAM
Serial
Host
Interface
(Local)
HDPC
Engine
HDCP
Registers
3.3
Serial
Host
Interface
(DDC)
R0XC+
R0XCR0X0+
R0X0R0X1+
R0X1R0X2+
R0X2R0XC+
R0XCR0X0+
R0X0R0X1+
R0X1R0X2+
R0X2-
CEC_D
CEC
0
CSDA
CSCL
CI2CA
RESET#
CSDA
CSCL
to DIGITAL 3/4, 4/4
IC201: SiI9233ACTU
HDMI receiver
CEC_A
DSDA0
DSDA1
DSDA2
DSDA3
DSCL0
DSCL1
DSCL2
DSCL3
1
2
3
4
1A
3Y
2A
GND
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
GND 2
77
B
A
C
D
E
F
G
H
I
J
K
L
M
N
RX-V371/HTR-3064
DIGITAL 2/4
1
Page 83
to AM/FM TUNER
CB222
3.3
3.3
3.4
0
9.1
0
0
0
0
0
0
-11.6
0
0
0
3.4
0.8
0
3.3
3.3
0
3.3
3.3
3.3
1.7
0
3.3
0
0
3.4
0
0
CB223
(B, G, F models)
3.4
3.4
3.4
3.4
3.4
3.4
3.4
3.4
0
CB221
3.3
B2
to MAIN (1)_CB1
0.3
C9
0
Page 81
to OPERATION (1)_CB101
2
RDS
IC223
3
4
3.4
3.4
to DIGITAL 4/4
-11.6
0
0
3.4
3.4
3.4
2.9
0
3.4
0
0
0
0
0
3.3
3.4
3.3
0
3.3
3.3
0
0
3.3
3.4
3.3
3.3
3.3
3.3
0
3.4
-11.6
3.4
3.4
-11.6
5
0
3.4
0
0
0.3
0
0
3.4
3.4
3.0
3.4
3.4
1.3
8
8
8
8
Port P1
Port P3
Port P4
Port P5
VCC2 ports
Internal peripheral functions
3.4
0
3.4
0
2.8
3.4
2.7
3.3
3.4
Timer (16-bit)
-11.6
Outputs (timer A): 5
Inputs (timer B): 6
0
0
C
3.4
3.3
3.4
3.4
0
3.4
B
3.4
(CRC-CCITT or CRC-16)
Voltage detector
Watchdog timer
On-chip debugger
Power-on reset
M16C/60 series
Microprocessor core
A/D converter
POINT B XL221 (Pin 11 of IC221)
POINT C 1 / IC221 (97 pin, +3.3M), 2 / IC221 (10 pin, N_RESET)
R0H
R1H
D/A converter
Memory
ROM (1)
SB
R0L
R1L
USP
R2
R3
(8-bit resolution x 2
circuits)
RAM (2)
ISP
INTB
PC
FLG
Multiplier
3.4
3.4
3.3
0
3.4
3.4
CRC arithmetic circuit
CEC function
A0
A1
FB
3.4
0
1.5
0
0
1.7
3.3
3.4
0
3.3
0.3
0.3
3.3
DMAC (4 channels)
Remote control signal
receiver (2 circuits)
(10-bit resolution x 26
channels)
3.4
3.4
(1 channel)
(15-bit)
3.4
3.4
Multi-master I C-bus interface
PWM function (8-bit x 2)
3.3
2
1
XIN-XOUT
XCIN-XCOUT
PLL frequency synthesizer
On-chip oscillator (125 kHz)
2
Real-time clock
3.4
No replacement part available.
0
3.4
(6 channels)
Clock synchronous serial I/O
(8-bit x 2 channels)
Three-phase motor control
circuit
3.3
3.4
System clock generator
UART or
clock synchronous serial I/O
3.4
0
0.8
1.7
Port P1
3.4
0.4
6
Port P0
0
IC221
3.4
3.4
8
8
3.3
3.4
3.4
IC221: R5F364AMNFB
Single chip 16-bit microprocessor
3.3
MICROPROCESSOR
3.4
VCC1 ports
IC221 1
(+3.3M)
7
IC221 1
(+3.3M)
Port P10
Port P9
8
IC221 2
(N_RESET)
IC221 2
(N_RESET)
AC POWER ON
(Connect the power cable)
AC POWER OFF
(Disconnect the power cable)
Port P8
8
Port P7
8
Port P6
8
8
Notes:
1. ROM size depends on MCU type.
2. RAM size depends on MCU type.
AC POWER ON
(Connect the power cable)
IC222: R1EX25032ASA00A
4096 x 8-bit SPI serial interface EEPROM
8
W
3
C
6
HOLD
7
D
5
Q
2
X
decoder
1
Y
decoder
4
S
Control logic
8
Vss
Address generator
High voltage generator
Vcc
Memory array
Y-select and Sense amp.
Serial-parallel converter
IC222
9
3.4
3.4
0
3.4
0
3.4
3.4
3.4
CB224
IC223: LC72725KM-UY-TLM-E
RDS signal demodulation IC
VREF
+3V
FLOUT
CIN
+3V
Vdda
EEPROM
32 kbit
Vssa
MPXIN
10
PLL
(57kHz)
REFERENCE
VOLTAGE
CLOCK
RECOVERY
(1187.5Hz)
ANTIALIASING
FILTER
57kHz
BPF
(SCF)
Vddd
Vssd
VREF
DATA
DECODER
SMOOTHING
FILTER
RDDA
RDCL
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
to DIGITAL 3/4
to DIGITAL 1/4
to DIGITAL 3/4, 4/4
RAM
(128bits)
to DIGITAL 4/4
TEST
TEST
XIN
78
RDS-ID
DETECT
OSC
XOUT
MODE
RST
CLK(4.332MHz)
RDS-ID/
READY
RDS-ID/READY
1
16 RDCL
RDDA
2
15 RST
VREF
3
14 XOUT
MPXIN
4
13 XIN
Vdda
5
12 Vddd
Vssa
6
11 Vssd
FLOUT
7
10 MODE
CIN
8
9
TEST
A
B
C
D
E
F
G
H
I
J
K
L
M
N
RX-V371/HTR-3064
DIGITAL 3/4
1
DIGITAL IN
to DIGITAL 4/4
2
0.3
to DIGITAL 4/4
0.3
to DIGITAL 1/4
0
3.3
3.3
3.3
1.3
0
0
0
0
0
1.3
3.4
1.3
0
1.3
0
0
1.3
3.4
0
1.3
0
1.3
0
3.4
1.7
0
1.7
1.7
1.7
0
0
0
3
0
0
3.3
1.7
FL/FR
C/SW
3.3
0
0
SL/SR
0
0
4
3.4
0
3.4
1.6
1.3
1.3
3.4
0
0
3.4
3.3
AUDIO DSP
0
0
0
0
3.3
3.4
0
0
3.3
0.3
1.3
3.4
1.7
0
0
IC241
3.3
0.7
1.3
1.3
3.4
0
0
0
2.2
1.3
to DIGITAL 2/4
0
3.3
1.5
0.3
3.3
0.5
0.3
0
2.1
3.4
0
No replacement part available.
3.4
3.4
0
3.3
0
1.6
0.4
0.4
3.3
0.5
0
0.3
0.4
0
0
0
0.5
0.5
0
0
0.4
0.4
1.6
0
3.4
0
3.3
0.4
0.4
3.3
0
0
3.4
1.8
0
0.4
0.4
3.3
2.9
3.3
1.8
3.3
3.4
0.5
0.4
0.5
0.5
0.4
3.4
0.5
0.5
1.6
0
2.9
0.5
0.5
3.4
0.5
0.5
0
1.3
0.5
1.3
0.3
0.3
3.4
0.4
0.4
0.4
0.5
1.3
0.4
0.4
3.4
1.3
3.4
0
0
0
0
3.3
3.3
2.9
0
3.3
3.4
2.9
7
3.5
0
0.5
0
3.4
0
0
0.5
0
1.3
1.3
0
0.4
1.5
0
3.4
0
3.3
3.4
3.4
6
1.3
0
3.4
IC243
IC246
1.3
IC242
5
0.4
3.3
0
0
3.3
0
1.5
0.3
0.3
0
2.1
0.4
CB241
0
1.6
1.5
0.3
0.7
1.5
2.2
3.4
1.3
2.1
1.3
0
2.2
1.5
0.7
3.4
3.3
0
0
3.3
8
IC243: MX29LV160DBTI-70G
16M-bit 3V supply flash memory
Program
256
Cache
32K Bytes
Program/Data
ROM Page3
256K Bytes
32
32
PMP DMP
32
32
High-performance
Crossbar Switch
10
32
I/O Interrupts MAX0
Out
32
CONTROL
32
MAX1
32
32
Events
In
32
32
32
Bank D
Bank C
Bank B
Address
Mode
Register
McASP2
2 Serializes
DIT Only
32
SPI1
RAS
32
SPI0
CAS
32
I2C0
32
I2C1
32
RTI
32
PLL
Peripheral Interrupt and DMA Events
Row
Address
Buffer
and
Refresh
Counter
Bank A
Sense Amplifier
CS
EMIF
dMAX
CKE
McASP1
6 Serializes
WE
Column
Address
Buffer
and
Refresh
Counter
Column Decoder
Data Control Circuit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
VSS
DQ15
VSSQ
DQ14
DQ13
VDDQ
DQ12
DQ11
VSSQ
DQ10
DQ9
VDDQ
DQ8
VSS
NC
UDQM
CLK
CKE
NC
A11
A9
A8
A7
A6
A5
A4
VSS
WRITE
CE#
OE#
WE#
RESET#
BYTE#
WP#/ACC
CONTROL
INPUT
LOGIC
PROGRAM/ERASE
STATE
HIGH VOLTAGE
MACHINE
(WSM)
ADDRESS
LATCH
A0-AM
AND
BUFFER
X-DECODER
256
256
CSP
32
32
VDD
DQ0
VDDQ
DQ1
DQ2
VSSQ
DQ3
DQ4
VDDQ
DQ5
DQ6
VSSQ
L(U)DQM
DQ7
VDD
LDQM
WE
CAS
DQ
RAS
CS
A13
A12
A10/AP
A0
A1
A2
A3
VDD
STATE
REGISTER
FLASH
ARRAY
ARRAY
Y-DECODER
Program
Fetch
32
Latch Circuit
Program/Data
ROM Page2
256K Bytes
Clock
Generator
Input & Output
Buffer
Program/Data
ROM Page1
256K Bytes
256
CLK
McASP0
16 Serializes
Row Decoder
256
Memory
Controller
64
JTAG EMU
Control Logic
INT
64
Program/Data
RAM
256K Bytes
Command Decoder
I/O
256
McASP DMA Bus
D1
Data
R/W
C67x+ Microprocessor
D2
Data
R/W
Peripheral Configuration Bus
9
IC242: M12L64164A-5TG
1M x 16-bit x 4 banks synchronous DRAM
IC241: D70YE101BRFP266
Floating-point digital signal processors
Y-PASS GATE
SOURCE
HV
COMMAND
DATA
DECODER
SENSE
AMPLIFIER
A15
A14
A13
A12
A11
A10
A9
A8
A19
NC
WE#
RESET#
NC
WP#/ACC
RY/BY#
A18
A17
A7
A6
A5
A4
A3
A2
A1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
A16
BYTE#
GND
Q15/A-1
Q7
Q14
Q6
Q13
Q5
Q12
Q4
VCC
Q11
Q3
Q10
Q2
Q9
Q1
Q8
Q0
OE#
GND
CE#
A0
PGM
DATA
HV
COMMAND
DATA LATCH
PROGRAM
DATA LATCH
Q0-Q15/A-1
I/O BUFFER
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
AM: MSB address
79
B
A
C
D
E
F
G
H
I
J
K
L
M
N
RX-V371/HTR-3064
DIGITAL 4/4
1
IC261: LC89058WD-E
Digital audio interface receiver
No replacement part available.
DOCK
DIGITAL IN
INT
35
MOUT
32
CB261
AUDIO
33
41 XMODE
Fs calculator
GPIO0 44
GPIO1 45
GPIO2 46
GPIO3 47
Microprocessor
I/F
40 CL
39 CE
38 DI
37 DO
Cbit, Pc
4.6
0
0
3.4
0
0
0
RX0
RX1
RX2
RX3
RX4
RX5
RX6
-0.2
0.3
0
3.4
0.3
0
3.4
3.3
0
0
0
24 SDIN
Data
Selector
Clock
Selector
21 RDATA
16 RMCK
Clock
Divider
17 RBCK
20 RLRCK
Oscillation
Amplifier
22 SBCK
23 SLRCK
34
CKST
IC262: PCM1803DBR
Stereo A/D converter
0
0.4
0
IC261
3.4
1.6
0.4
0
1.6
D
DIR
0.4
POINT D XL261 (Pin 29 of IC261)
PLL
3.3
0
3.4
36 RERR
Demodulation
and
Lock detect
3.3
0
to DIGITAL 1/4
Input
Selector
XIN 29
XOUT 28
XMCK 27
0
3
2
3
4
5
8
9
10
LPF 13
3.3
0
0
0
0
0
to DIGITAL 2/4
0
3.4
0
0
3.4
0
0
0
3.4
0
0
2
0
0
4.3
RXOUT2 48
RXOUT1 1
Reference
VREF2
0
DOUT
Mode/
Format
Control
FMT0
FMT1
Delta-Sigma
Modulator
1.3
1.7
1.7
1.3
0
1.7
BCK
LRCK
Serial
Interface
x 1/64, x 1/128
Decimation
Filter
With
High-Pass Filter
VREF1
0
VINR
1.7
0
1.7
3.4
3.4
3.4
Delta-Sigma
Modulator
VINL
1.7
3.4
0
MODE0
MODE1
BYPAS
TEST
Power Supply
DIGITAL IN
OSR
PDWN
Clock and Timing Control
SCKI
5.0
4
VCC
0
AGND DGND
VDD
VINL
VINR
VREF1
VREF2
VCC
AGND
PDWN
BYPAS
TEST
LRCK
0.4
0
0.4
0
0
CB263
0
to DIGITAL 2/4
0
0
0
to DIGITAL 3/4
Page 82
20
19
18
17
16
15
14
13
12
11
1
2
3
4
5
6
7
8
9
10
MODE1
MODE0
FMT1
FMT0
OSR
SCKI
VDD
DGND
DOUT
BCK
E4
to OPERATION (4)_CB196
0
5.0
0
0
3.3
5
3.3
0
0
0
1.7
1.7
to DIGITAL 2/4
0
1.3
0
7.9
5.0
IC268
3.4
3.4
1.7
0
3.4
5.0
0
0
IC262
3.3
0
LRCK
2.6
DAC
Serial
Input
I/F
DATA1 (1, 2)
2.5
DATA2 (3, 4)
DATA4 (7, 8)
8x
Oversampling
Digital Filter
With
Function
Controller
ADC
IC266
Enhanced
Multilevel
Delta-Sigma
Modulator
5.0
7.9
5.0
Function
Control
I/F
7.9
to DIGITAL 2/4
MSEL
VOUT1
VOUT2
DAC
Output Amp and
Low-Pass Filter
DAC
Output Amp and
Low-Pass Filter
DAC
Output Amp and
Low-Pass Filter
DAC
Output Amp and
Low-Pass Filter
DAC
Output Amp and
Low-Pass Filter
DAC
Output Amp and
Low-Pass Filter
MS/ADR/FMT1
MC/SCL/DEMP
MD/SDA/MUTE
FRONT L
Output Amp and
Low-Pass Filter
Output Amp and
Low-Pass Filter
DATA3 (5, 6)
2.5
0
DAC
BCK
4.9
3.4
6
IC263: PCM1681PWPR
Audio digital-to-analog converter
0
VOUT3
VCOM
VOUT4
VOUT5
VOUT6
VOUT7
VOUT8
System Clock
SCK
3.4
System Clock
Zero Detect
Manager
Power Supply
7
FL/FR
1.7
3.3
2.7
1.2
1.0
IC264
to DIGITAL 3/4
0
1.3
5.0
1.7
2.5
1.7
2.5
3.4
2.5
0
1.3
5.0
0
2.5
2.5
2.5
VCC2
AGND2
VDD
VCC1
DGND
ZR1/ZR1/FMT0
1
28
ZR2
MS/ADR/FMT1
2
27
MC/SCL/DEMP
3
26
4
25
VOUT1
VOUT2
VCOM
5
24
AGND2
MD/SDA/MUTE
SCK
DATA1
BCK
6
7
23
22
VCC2
VOUT3
LRCK
8
21
0
VDD
DGND
9
20
10
19
VOUT4
VOUT5
VOUT6
-11.6
DATA2
11
18
AGND1
-11.6
DATA3
DATA4
12
13
17
16
VCC1
VOUT7
MSEL
14
15
VOUT8
0
0
2.5
DAC
Page 82
E2
-11.6
to OPERATION (4)_CB195
5.0
7.9
6.9
0
SUBWOOFER
SURROUND L
2.5
3.4
1.3
1.3
2.5
2.5
1.3
0
SL/SR
0
2.5
2.5
0
C/SW
CENTER
2.5
AGND1
2.5
0.3
ZR2
2.5
3.3
ZR1/ZR1/FMT0
3.4
CB264
0
IC263
3.4
0
7.9
8.9
0
0
0
0
8
1.0
3.3
2.7
1.1
IC265
to DIGITAL 2/4
IC264, 265: BD9325FJ
2A output current integrated MOSFET step down regulator
5.0
3.4
IC267
5.0
5.0
0
IC267
0
5.0
0
IC267
0
0
0
9
5.0
IC267
VCC
OPEN
SHUTDOWN
EN
5V
7
VREF
OSC
VREG
BST
0
1
3.4
3.4
UVLO
to DIGITAL 2/4
IBIAS
5
CB262
CONTROL 1
to OPERATION (2)_CB131
10
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
80
Thermal
Protection
Bandgap
Reference
GND 2
1A
1
14 Vcc
1B
2
13 4B
1Y
3
12 4A
2A
4
11 4Y
2B
5
10 3B
2Y
6
9
3A
GND
7
8
3Y
VIN 5
Thermal
Protection
Bandgap
Reference
GND 2
LVS
8
SW
DRV
3
SLOPE
6
4 VOUT
Control 1
ERR
COMP
SS
4 VOUT
VIN 5
B8
IC268: NJM2867F3-05
Low dropout voltage regulator
2
TSD
S
FB
IC267: TC74VHCT08AFT
Quad 2-input AND gate
IC266: NJM2830U1-05 (TE1)
Low dropout voltage regulator
Page 82
12V
VIN
3.0
3.4
0
0
9.0
0
4.9
4.6
2.8
0
7.9
2.7
OCP
LOGIC
PWM
R
LVS
Soft Start
4
GND
OUTPUT
A
B
C
D
E
F
G
H
I
J
L
K
M
N
RX-V371/HTR-3064
OPERATION 1/2
-29.4
-29.4
-32.1
-34.4
-32.1
-34.3
-32.1
-34.3
-34.3
-38.7
-34.3
-36.5
-30.0
-34.3
-34.3
-34.3
-34.3
-34.3
-36.5
-36.5
-36.3
-32.2
-32.1
-36.5
-34.3
-36.5
-30.0
-34.3
-36.5
-36.5
-34.2
-34.5
-38.7
-36.4
-34.3
-36.5
-36.5
-38.7
-36.4
-36.4
-36.6
-36.6
-36.4
-36.6
-36.4
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-29.4
-29.4
1
2
3.4
-36.5
-30.0
-34.3
-32.1
VFD DRIVER
-38.7
-34.3
-36.5
-32.1
-34.2
-32.2
-36.5
4
Page 83
J4
to MAIN (1)_W1
-36.5
3.3
0
PHONES
SILENT CINEMA
3.3
-36.4
0
0
-36.5
-36.5
3.4
-36.4
3.4
-38.7
-36.5
3.4
CGROM
(35-bit x 166)
44
Segment
output
circuit
Code
write
Serial
receive
circuit
CS 2
SCK 3
SDATA 4
-38.9
dot data
write
data
CGROM
(35-bit x 16)
Code/
command
control
circuit
VOLUME
3.4
-38.9
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
-36.6
W1003
3.4
3.3
3.3
XIN 7
Clock
generator
XOUT 6
timing
clock
Display
controller
scan pulse
0
SEG34
45
SEG35
50
49
48
46
0
Digit
output
circuit
RESET 1
Vcc1 8
Vcc2 18
Vss 5
Vp 64
5
DIG11/
SEG42
DIG12/
SEG41
DIG13/
SEG40
DIG14/
SEG39
DIG15/
SEG38
DIG16/
SEG37
DIG17/
SEG36
63
DIG00
53
DIG10
IC102: NJM4565M (TE1)
Dual operational amplifier
OPERATION (6)
Remote control
sensor
OPERATION (8)
SEG26
9
47
0
0
SEG25
17
51
Segment/
Digit
select/
output
circuit
code
select
3.4
SEG00
19
52
3.4
-36.5
0
Display code
RAM
(8-bit x 60)
F9
3.4
-36.5
-36.5
0
Page 82
to OPERATION (2)_CB136
-36.4
-36.4
0
W1001
-38.9
-36.5
-36.3
-36.5
-36.4
0
CB102
-29.4
-36.5
0
-36.5
0
-34.5
1.6
1.6
-36.5
IC101: M66003-0131FP-R
18 digit 5 x 7 segment VFD controller/driver
-29.4
3.4
CB145
3.4
3.4
3.4
-34.3
3.4
CB166
-30.1
-34.4
IC101
-36.5
JK166
-32.1
-34.3
-34.3
-36.5
OPERATION (5)
-32.2
-32.1
-38.7
CB106
3
3.4
-32.2
-34.3
-36.5
-30.0
-34.3
-34.3
-34.3
-36.5
-34.3
-36.5
-34.3
-36.5
-32.2
-32.2
-36.5
-34.3
3.4
V+
8
2, 6
3.4
0
3.4
–INPUT
+INPUT
6
1, 7
OUTPUT
3, 5
V–
4
OPERATION (1)
VIDEO
7
TV
CD
RADIO
CB171
JK171
12.2
0
0
PORTABLE
0
0
0
0
0
0
JK101
0
0
0
3.3
0
3.4
0
3.4
0
0
0
3.4
0
IC102
0
0
0
0
0
3.4
3.4
3.4
0
-11.8
3.4
3.4
3.4
3.4
3.4
0
0
0
0
3.4
0
-11.8
IC102
AUDIO
12.2
0
12.2
8
VIDEO AUX
CB103
0
12.2
YPAO
MIC
-11.7
BD
DVD
CB101
CB104
(Power)
Page 82
9
Page 78
B2
C1
to OPERATION (4)_CB193
OPERATION (7)
to DIGITAL_CB221
Key detection for A/D port
Key input (A/D) pull-up resistance 10 k-ohms
10
Ohm
V
0
0 – 0.15
+ 1.0 k
0.15 – 0.48
+ 1.5 k
0.49 – 0.82
+ 1.8 k
0.83 – 1.14
+ 2.2 k
1.15 – 1.46
+ 3.3 k
1.47 – 1.79
+ 4.7 k
1.80 – 2.12
+ 8.2 k
2.13 – 2.40
+ 10.0 k
2.41 – 2.91
A/D value
(3.3V=255)
0 – 11
12 – 37
38 – 64
65 – 88
89 – 113
114 – 139
140 – 164
165 – 186
187 – 226
KEY1 (92 pin)
STRAIGHT
TUNING
>>
TUNING
<<
AM
FM
PRESET
>
PRESET
<
MEMORY
INFO
Ohm
V
0
0 – 0.15
+ 1.0 k
0.15 – 0.42
+ 1.0 k
0.43 – 0.70
+ 1.5 k
0.71 – 0.97
+ 1.5 k
0.98 – 1.24
+ 2.2 k
1.25 – 1.53
+ 3.3 k
1.54 – 1.84
+ 4.7 k
1.84 – 2.10
(22 k + 33 k)
2.11 – 2.33
22.0 k
2.34 – 2.54
33.0 k
2.54 – 2.71
A/D value
(3.3V=255)
0 – 11
12 – 32
33 – 54
55 – 75
76 – 96
97 – 119
12 – 142
143 – 163
164 – 181
182 – 197
198 – 209
KEY2 (91 pin)
SCENE
RADIO
SCENE
CD
SCENE
TV
SCENE
BD/DVD
PROGRAM
>
PROGRAM
<
INPUT
>
INPUT
<
–
(Power)
TONE
CONTROL
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
81
B
A
C
D
E
F
G
H
I
J
K
L
M
N
RX-V371/HTR-3064
OPERATION 2/2
1
Page 81
J9
to OPERATION (1)_CB104
0
0
0
0
0
0
-11.7
CB191
0
12.2
CB193
-11.7
5.0
12.2
-11.6
-11.6
-11.6
-11.6
0
0
0
2
0
Page 84
F1
to MAIN (1)_CB22
0
0
0
0
2.5
0
2.5
2.5
2.5
2.5
Page 80
L7
to DIGITAL_CB264
0
0
2.5
SURROUND L
2.5
2.5
2.5
2.5
SUBWOOFER
CENTER
0
0
2.5
0
2.5
0
0
CB195
FRONT L
3
CB192
0
0
0
0
0
3.3
0
Page 84
E1
to MAIN (1)_CB21
4
0
0
0
0
5.0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0.4
Page 80
L5
to DIGITAL_CB263
0.4
0
0
0.4
0.4
0
0
5.0
3.3
0
0
0
0
0
-11.7
0
0
WV36590
0.01
CB196
0
0
5.0
DIGITAL IN
5.0
5.0
CB194
OPERATION (4)
Page 85
5
F2
to MAIN (2)_CB41
3.4
OPERATION (2)
3.4
7.5
6
3.4
0
0
0
3.4
3.4
9.9
0
0
9.9
9.9
3.7
3.7
7.5
3.7
0
7.5
0
0
AC9.6
5.3
0
0
3.7
0.7
CB151
IC135
0
1.5
3.4
AC IN
0.5
0
W1501
0
9.9
3.0
0
CB154
7.5
9.9
0
1.2
3.0
19.2
4.9
3.7
0.7
9.9
IC131
CB132
3.7
7.5
7
0
CB155
CB152
9.0
11.6
0
9.8
12.2
3.4
5 k-ohms
10 W
-19.7
0
9.8
0
Page 80
0
19.2
0
8
OPERATION (3)
19.2
IC133
3.4
3.0
3.4
0
to DIGITAL_CB262
4.9
POWER
TRANSFORMER
CB135
0
9.0
E10
CB153
0
5 k-ohms
10 W
0
3.6
0
4.6
AC18.4
4.0
-0.4
-19.7
-11.8
3.8
7.9
-29.4
2.8
2.7
to POWER TRANSFORMER
AC8.5
-29.4
IC134
0
AC15.6
3.5
AC6.0
7.9
IC134: KIA7912PI
Voltage regulator
W1301
CB131
5 k-ohms
10 W
3.5
IC133: KIA7812API
Voltage regulator
IC132, 135: KIA7805API
Voltage regulator
3.6
0
0
IC131: NJM2388F33
Low dropout voltage regulator with ON/OFF control
9
R1
R17
Q11
Page 83
J6
to MAIN (1)_CB2
0
-11.8
1.7
-38.9
9.8
-0.4
5 k-ohms
10 W
VIN
1
2
Q14
Q17
Q19
R19
R10 R15
R16
Cont
4
ON/OFF
control
Q13
-0.4
Over Voltage
Protection
0
GND
R3
Q3
R13
3
R4
R5
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
82
Notes)
Safety measures
t4PNFJOUFSOBMQBSUTJOUIJTQSPEVDUDPOUBJOIJHIWPMUBHFTBOEBSFEBOHFSPVT#FTVSFUPUBLFTBGFUZNFBTVSFTEVSJOHTFSWJDJOH TVDIBTXFBSJOHJOTVMBUJOHHMPWFT
t/PUFUIBUUIFDBQBDJUPSTJOEJDBUFECFMPXBSFEBOHFSPVTFWFOBGUFSUIFQPXFSJTUVSOFEPGGCFDBVTFBOFMFDUSJDDIBSHFSFNBJOTBOEBIJHIWPMUBHFDPOUJOVFTUPFYJTUUIFSF
#FGPSFTUBSUJOHBOZSFQBJSXPSL DPOOFDUBEJTDIBSHJOHSFTJTUPS LPINT8 UPUIFUFSNJOBMTPGFBDIDBQBDJUPSJOEJDBUFECFMPXUPEJTDIBSHFFMFDUSJDJUZ
5IFUJNFSFRVJSFEGPSEJTDIBSHJOHJTBCPVUTFDPOETQFSFBDI
$PO01&3"5*0/ 1$#
Q12 Q13
Q26-1
Q5
R6
Q8
Q9
Q3
R13
R4
R8
R5
Q26
C2
R6
Q4
Q8
Q9
Q6
Q5
R2
R8
2 COMMON (GND)
R11
3 OUTPUT
Q27
D4
Q14
Q15
R0
R21
Q8
Q5
R10
Q27-1
Q7
Q4
2 COMMON (GND)
10
R25
Q3
R26
Q7
R3
Q31
R17
R19
Q2
Q2
R12
R24
Q25
R20
Q10
Q4
Thermal
Over Current
Protection Protection
R14
3 OUTPUT
Q13
R13
Q23
R20
R9
C1
R7
R2
R21
Q7
Q30
Q20
Q18
R14
R16
Q6
Q1
R18
Z1
Q10
Q2
R19
Q18
R11
R9
C1
R7
R2
R20
Q6
Q1
R18
R23
Q24
Q19
R1
R10 R15
R12
3 OUTPUT
Q18
R11
Z1
R16
Q29
Q16
Q19
R21
Q21
Q22
Q15
Q17
R18
Q17
Q11-1
Q14
R14
R12
Bandgap
Reference
3.8
Q28
Q12
Q12
VOUT
to OPERATION (1)_CB102
4.0
-0.4
R23
Q11
Q16
K4
9.8
4.6
R1
Q11-1
R17
Q15
Page 81
IC132
12.2
R22
R23
CB136
-29.4
-38.9
-29.4
CB134
1 INPUT
1 INPUT
R22
1 COMMON (GND)
R22
R15
0
R3
R4
C1
R9
R6
R5
Q16
Q11
Q9
Q10
R7
R8
2 INPUT
A
B
C
D
E
F
G
H
I
J
L
K
M
N
RX-V371/HTR-3064
MAIN 1/3
1
MAIN (1)
0
IC2
54.2
0
0
0
0
0
2.8
0
0
0
0
0
0
3.3
53.7
3.3
54.2
-54.2
3.3
-54.1
-52.9
1.7
0
SURROUND L
3.3
FRONT
L/R
0
3.3
2
Page 78
F2
SPEAKERS
FRONT L
53.9
3.4
0
to DIGITAL_CB222
IC1: STK433-330F-E
3-channel AF power amplifier, stand-by circuit built-in
0.8
0
0
0
3
0
0
-11.6
8
to MAIN 2/3
0
0
Pre
Driver
CH1
0
0
0
0
11
CB1
12
Pre
Driver
CH2
Pre
Driver
CH3
+
+
+
–
–
–
3
Stand-by Circuit
1
2
53.9
W1
3.3
SUB
Page 81
0
0
0
9
A4
5 4 6 7
10
13
14 15 16 17
19 18
to OPERATION (5)_CB166
0
IC2: STK433-130F-E
2-channel AF power amplifier, stand-by circuit built-in
4
0
0
0
0
0
3
5.0
0
8
3.4
0
0
0
11
0
0
0
0
0
0
0
12
CENTER
Pre Driver
Pre Driver
CH1
CH2
+
+
–
–
15
14
0
0
0
0
0
0
0
0
0
2.8
0
0
53.7
-54.1
-54.2
0
0
-52.9
IC1
CENTER
Stand-by Circuit
SPEAKERS
SURROUND L
5
1
53.9
SURROUND
L/R
0
2
SUB
0
9
5 4 6 7
10
13
CB2
to MAIN 2/3
FRONT L
0
12.2
0
12.2
0
Page 82
-11.8
1.7
12.1
B10
to OPERATION (2)_CB134
-38.9
12.1
-11.8
0
W2
6
11.8
53.9
0
-11.8
0
0
12.1
0
0
12.0
3.3
12.0
0
0
-11.8
0
7
12.2
53.9
CENTER
0
0
0
12.0
3.3
0
12.0
0
Notes)
Safety measures
t4PNFJOUFSOBMQBSUTJOUIJTQSPEVDUDPOUBJOIJHIWPMUBHFTBOEBSFEBOHFSPVT#FTVSFUPUBLFTBGFUZNFBTVSFTEVSJOHTFSWJDJOH TVDIBTXFBSJOHJOTVMBUJOHHMPWFT
t/PUFUIBUUIFDBQBDJUPSTJOEJDBUFECFMPXBSFEBOHFSPVTFWFOBGUFSUIFQPXFSJTUVSOFEPGGCFDBVTFBOFMFDUSJDDIBSHFSFNBJOTBOEBIJHIWPMUBHFDPOUJOVFTUPFYJTUUIFSF
#FGPSFTUBSUJOHBOZSFQBJSXPSL DPOOFDUBEJTDIBSHJOHSFTJTUPS LPINT8 UPUIFUFSNJOBMTPGFBDIDBQBDJUPSJOEJDBUFECFMPXUPEJTDIBSHFFMFDUSJDJUZ
5IFUJNFSFRVJSFEGPSEJTDIBSHJOHJTBCPVUTFDPOETQFSFBDI
$ $PO."*/ 1$#
-11.8
0
12.2
0
53.7
0
53.8
0
12.0
3.3
53.2
8
12.0
0
53.7
52.7
-11.8
3.3
3.3
2.7
2.7
12.2
12.1
-11.8
-12.1
-52.9
-53.7
-39.2
0
-53.7
-11.8
5 k-ohms
10 W
-53.9
9
-11.8
0
-38.9
-52.3
-53.5
-52.9
-39.4
-53.9
-53.9
0
0.2
0
0.2
0
-54.1
CB3
54.2
0
0
AC41.1
to POWER TRANSFORMER
AC80.2
10
-52.3
0
5 k-ohms
10 W
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
83
B
A
C
D
E
F
G
H
I
J
K
L
M
N
RX-V371/HTR-3064
MAIN 2/3
1
C4
Page 82
C2
CB22
to OPERATION (4)_CB191
AVEE
ADCL 53
ATT
SBLCIN
SBRCIN
FRIN2
FLIN2
SRIN2
SLIN2
SWIN2
CIN2
SBRIN2
SBLIN2
SLCIN
SRCIN
SUBR2
SUBL2
49
48
47
46 45
44
43
42
41
40
39
38
37
36
35
34
33
32
AVCC
SUBL1
50
MUTE 51
A VEE 52
SUBR1
DATA
MAIN (1)
2
DGND
0
-11.7
0
2.5
2.5
0
0
12.2
0
0
2.5
0
2.5
2.5
2.5
0
0
2.5
2.5
0
0
0
0
0
0
0
0
0
0
0
0
8-channel electronic volume with 11 input selector and tone control
0
0.4
0
0.4
5.0
CB21
IC21: R2A15220FP
CLOCK
Page 82
to OPERATION (4)_CB192
31
30 TRER
MCU
I/F
AVCC
27 TREL
SUB2
AGND 55
26 BASSL2
SUB
MAIN
SUB
MAIN
MAIN
INR1 56
Bass/Treble
-14~+14dB
(2dBstep)
0~-95dB,
-∞
(0.5dBstep)
INL1 57
INR2 58
24 FRC
Bypass
Tone
Tone+MIX
Tone
23 FR Pre-OUT
+42~0dB
(0.5dBstep)
Tone+MIX
Tone
Tone
INR3 60
25 BASSL1
+42~0dB
(0.5dBstep)
SUB
INL2 59
22 FROUT
21 AGND
Bypass
INL3 61
3
AV 1
OPTICAL
0
0
DIGITAL IN
5.0
0~95dB,
-∞
(0.5dBstep)
INR4 62
12.1
0
0
19 FL Pre-OUT
18 FLC
+42~-95dB
-(0.5dBstep)
INR5 64
6.9
20 FLOUT
Bass/Treble
-14~+14dB
(2dBstep)
INL4 63
0
IC23
17 CC
16 COUT
INL5 65
0
IC23
5.0
IC22
AV 2
COAXIAL
2.5
2.0
0
0.4
FRONT L
0
IC22
0
4.9
0
4.9
15 AGND
+42~-95dB
-∞(0.5dBstep)
INL6 67
0
-11.7
IC22
+42~-95dB
-∞(0.5dBstep)
INR6 66
0
14 SWOUT
13 SWC
INR7 68
+42~-95dB
-∞(0.5dBstep)
INL7 69
0
29 BASSR2
28 BASSR1
0/-6/-12/-18dB
ADCR 54
12 SRC
INR8 70
11 SR Pre-OUT
REC
-6.9
INL8 71
AV 3
COAXIAL
(CD)
IC22
2.5
INRA/RECR1 72
IC22
2.0
0
0
IC24
0.4
10 SROUT
+42~-95dB
-∞(0.5dBstep)
12.1
IC22
9 A GND
8 SLOUT
INLA/RECL1 73
0
INR9 74
4
7 SL Pre-OUT
+42~-95dB
-∞(0.5dBstep)
INL9 75
0
IC24
0
0
-11.7
SURROUND L
6 SLC
INRB/RECR2 76
5 AGND
INLB/RECL2 77
4 SBRC
INR10/RECR4 78
3 SBR Pre-OUT
INR10/RECL4 79
0
0
IC25
95
96
97
98
SBLC
99 100
SBL OUT
94
SBRIN1
FLIN1
92 93
SBLIN1
RECL3
91
SRIN1
90
SLIN1
89
CIN1
88
SWIN1
87
FRIN1
86
RECR3
84 85
INL14
83
SBL Pre-OUT
-11.7
0
0
1 AGND
0
0
5
2 SBR OUT
0
IC25
82
INR14
0
81
INL13
5.0
INR11/RECR5 80
-11.7
0
INR13
CENTER
12.1
INL12
0
INR12
OPTICAL
(TV)
INL11/RECL5
0
AV 4
0
-11.7
SUBWOOFER
AV 5
0
-11.7
0
IC26
IC23-25, 27: NJM4565M (TE1)
Dual operational amplifier
IC22: TC74VHCU04FT
Hex inverters
IC26
6
AV OUT
12.1
1A
1
14 VCC
1Y
2
13 6A
2A
3
12 6Y
V+
8
0
IC27
0
0
2Y
4
11 5A
3A
5
10 5Y
3Y
6
9
4A
GND
7
8
4Y
2, 6
–INPUT
+INPUT
1, 7
OUTPUT
3, 5
to MAIN 1/3
0
0
0
-11.7
0
V–
4
-11.7
0
AUDIO 1
IC27
0
0
6.9
0
0
0
-11.7
7
ANALOG IN
0
0
0
-6.9
0
0
0
0
0
0
0
AUDIO 2
SELECTOR
and E-VOLUME
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
IC21
0
0
8
AUDIO
OUT
-11.7
0
0
-11.7
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
9
SUBWOOFER
OUT
10
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
84
A
B
C
D
E
F
G
H
I
J
K
L
M
N
RX-V371/HTR-3064
MAIN 3/3
1
Page 82
E5
MAIN (2)
0
0
3.3
0
0
0
-11.7
0
5.0
0
MONITOR
OUT
5.0
2
0
0
CB41
to OPERATION (4)_CB194
3
IC41: NJM2586AM (TE2)
Wide band 3-input 1-output 3-circuit video amplifier
CH1 IN1
1
SW 1
2
Bias
CH1 IN2
3
SW 2
4
CH1 IN3
5
6dB
Amp
75
Driver
6dB
Amp
75
Driver
6dB
Amp
75
Driver
Cont1
Cont2
24
CH1 OUT
23
PS
22
CH2 OUT
Cont1
Bias
21
V+2
20
CH3 OUT
Cont1
Bias
GND
COMPONENT
VIDEO
0
0
5.0
0
0
0
IC41
4
0
6
19
GND
V+1
7
18
V-2
CH2 IN1
8
17
CH3 IN1
5.0
0
0
5.0
-4.8
GND
9
16
V-1
CH2 IN2
10
15
CH3 IN2
GND
11
14
GND
CH2 IN3
12
13
CH3 IN3
0
0
0
0
0
0
0
0
Cont2
Cont2
Bias
-4.8
0
Bias
Bias
0
0
Bias
Bias
Bias
AV 1
MAIN (3)
5
COMPONENT
SELECTOR
VOLTAGE
SELECTOR
to POWER TRANSFORMER
IC42: TC74HC4051AFEL
8-channel analog multiplexer/demultiplexer
CB51
-4.8
-5.5
A
-5.5
B
AV 2
0
C
6
Logic Level Converter
-9.4
R, S models
INH
OUTC
IN
COM
0
1
15 2
COM 3
14 1
4
7 4
13 0
5 5
12 3
6
IN
16 Vcc
6 2
3
5
OUTC
4 1
2
7
INH 6
11 A
VEE 7
10 B
GND 8
9
C
MAIN (4)
IC43: LA73050-TLM-E
6-channel 75-ohm video driver
7
AV 3
0
AV 4
0
-4.8
0
0
0
0
0
0
0
0
0
5.0
AV 5
IC42
5.0
0
0
8
0
VIDEO
COMPOSITE
SELECTOR
AV OUT
0
IC43
3.3
0
-4.8
-4.8
0
IC43
3.3
0
0
0
0
0
IC43
3.3
0
5.0
0
-4.8
0
3.3
IC43
3.3
0
0
-4.8
IC43
0
0
IC43
0
0
9
0
5.0
MONITOR OUT
0
IC43
0
0
3.3
10
★ All voltages are measured with a 10MΩ/V DC electronic voltmeter.
★ Components having special characteristics are marked ⚠ and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
85
RX-V371/HTR-3064
■ REPLACEMENT PARTS LIST
● ELECTRICAL COMPONENT PARTS
WARNING
•
Components having special characteristics are marked ⚠ and must be replaced with parts having specifications
equal to those originally installed.
ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS:
: CHIP ALUMI.ELECTROLYTIC CAP
: CERAMIC CAP
: CERAMIC CAP ARRAY
: CHIP CERAMIC CAP
: CHIP MULTILAYER CERAMIC CAP
: RECOGNIZED CERAMIC CAP
: CERAMIC TUBULAR CAP
: SEMI CONDUCTIVE CERAMIC CAP
: ELECTROLYTIC CAP
: BIPOLAR ELECTROLYTIC CAP
: CHIP ELECTROLYTIC CAP
: MICA CAP
: MULTILAYER FILM CAP
: METALLIZED POLYESTER FILM CAP
: MYLAR FILM CAP
: MULTILAYER MYLAR FILM CAP
: NIOBIUM OXIDE CAP
: PAPER CAPACITOR
: POLYSTYRENE FILM CAP
: POLYESTER FILM CAP
: POLYPROPYLENE FILM CAP
: CHIP POLYPROPYLENE FILM CAP
: TANTALIUM CAP
: CHIP TANTALIUM CAP
: TRIMMER CAP
: CONNECTOR
: CONNECTOR,BASE PIN
: CONNECTOR,CANNON
: CONNECTOR,DIN
: CONNECTOR,FLAT CABLE
: CONNECTOR,FLEXIBLE FLAT CABLE
: HDMI CONNECTOR
: PHOTO FIBER SENSOR,RECEIVED
: PHOTO FIBER SENSOR,TRANSMITTED
: DIODE ARRAY
: DIODE BRIDGE
: CHIP DIODE
: VARACTOR DIODE
: ZENER DIODE
: CHIP ZENER DIODE
: SCHOTTKY BARRIER DIODE
: PHOTO DIODE
: FERRITE BEADS
: FERRITE CORE
: CHIP FET
: FLUORESCENT DISPLAY
: CERAMIC FILTER
: COMB FILTER MODULE
: LC FILTER,EMI
: CHIP FUSE
: GROUND PLATE
: GROUND TERMINAL
: JUMPER CONNECTOR
JUMPER.TST
L.DTCT
LED.CHP
LED.DSPLY
LED.INFRD
PHOT.CPL
PHOT.INTR
PHOT.RFLCT
PHOT.TR
PIN.TEST
R.ARRAY
R.CAR.
R.CAR.CHP
R.CAR.FP
R.CEMENT
R.FUS
R.MTL.CHP
R.MTL.FLM
R.MTL.OXD
R.MTL.PLAT
RSNR.CE
RSNR.CRYS
SCR.BND.HD
SCR.TERM
SCR.TR
SURG.PRTCT
SUPRT.PCB
SW.LEVER
SW.MICRO
SW.LEAF
SW.PUSH
SW.RT
SW.RT.ENC
SW.RT.MTR
SW.SLIDE
SW.TACT
TERM.SP
TERM.WRAP
THRMST.CHP
TR
TR.CHP
TR.DGT
TR.DGT.CHP
TR.PAIR
TRANS
TRANS.PULS
TRANS.PWR
VOLT.SELCT
VR
VR.MTR
VR.SLIDE
VR.SW
VR.TRIM
: JUMPER,TEST POINT
: LIGHT DETECTING MODULE
: CHIP LED
: LED DISPLAY
: LED,INFRARED
: PHOTO COUPLER
: PHOTO INTERRUPTER
: PHOTO REFLECTOR
: PHOTO TRANSISTOR
: PIN,TEST POINT
: RESISTOR ARRAY
: CARBON RESISTOR
: CHIP RESISTOR
: FLAME PROOF CARBON RESISTOR
: CEMENT RESISTOR
: FUSIBLE RESISTOR
: CHIP METAL FILM RESISTOR
: METAL FILM RESISTOR
: METAL OXIDE FILM RESISTOR
: METAL PLATE RESISTOR
: CERAMIC RESONATOR
: CRYSTAL RESONATOR
: BIND HEAD B-TIGHT SCREW
: SCREW TERMINAL
: SCREW,TRANSISTOR
: SURGE PROTECTOR
: P.C.B. SUPPORT
: LEVER SWITCH
: MICRO SWITCH
: LEAF SWITCH
: PUSH SWITCH
: ROTARY SWITCH
: ROTARY ENCODER
: ROTARY SWITCH WITH MOTOR
: SLIDE SWITCH
: TACT SWITCH
: SPEAKER TERMINAL
: WRAPPING TERMINAL
: CHIP THERMISTOR
: TRANSISTOR
: CHIP TRANSISTOR
: DIGITAL TRANSISTOR
: CHIP DIGITAL TRANSISTOR
: PAIR TRANSISTOR
: TRANSFORMER
: PULSE TRANSFORMER
: POWER TRANSFORMER
: VOLTAGE SELECTOR
: ROTARY POTENTIOMETER
: POTENTIOMETER WITH MOTOR
: SLIDE POTENTIOMETER
: POTENTIOMETER WITH SWITCH
: TRIMMER POTENTIOMETER
RX-V371/HTR-3064
C.A.EL.CHP
C.CE
C.CE.ARRAY
C.CE.CHP
C.CE.M.CHP
C.CE.SAFTY
C.CE.TUBLR
C.CE.SMI
C.EL
C.EL.BP
C.EL.CHP
C.MICA
C.ML.FLM
C.MP
C.MYLAR
C.MYLAR.ML
C.NIOB.OXD
C.PAPER
C.PLS
C.POL
C.PP
C.PP.CHP
C.TNTL
C.TNTL.CHP
C.TRIM
CN
CN.BS.PIN
CN.CANNON
CN.DIN
CN.FLAT
CN.FFC
CN.HDMI
CN.PHOTO.R
CN.PHOTO.T
DIODE.ARRAY
DIODE.BRG
DIODE.CHP
DIODE.VAR
DIODE.ZENR
DIODE.Z.CHP
DIODE.SCHOTTKY
DIODE.PHOT
FER.BEAD
FER.CORE
FET.CHP
FL.DSPLY
FLTR.CE
FLTR.COMB
FLTR.LC.RF
FUSE.CHP
GND.MTL
GND.TERM
JUMPER.CN
87
RX-V371/HTR-3064
DIGITAL
Ref No.
RX-V371/HTR-3064
*
*
*
* CB201-205
CB221
CB222
CB223
CB262
CB263-264
C2004
C2005-2007
C2009
C2010
C2012-2014
C2016
C2017
C2020-2021
C2022-2026
C2028
C2029
C2031-2032
C2033
C2034
C2035-2036
C2037-2040
C2043
C2044-2045
C2047
C2049
C2050
C2051-2052
C2053-2055
C2056
C2057-2061
C2062-2063
C2064-2065
C2067-2068
C2071
C2073
C2094-2095
C2097-2098
C2099
C2100
C2202
C2203
C2204
C2205
C2206
C2207
C2208
C2209-2210
C2211-2212
C2213-2218
C2219
C2234
C2235
C2236
Part No.
WW703100
WW703200
WW703300
WW271700
VM929900
VQ045100
VQ044500
VK027300
VQ962100
WP882000
US135100
US135100
US063100
US063100
WP882000
US135100
US135100
US063100
WP882000
US135100
US063100
US061120
US061150
US135100
WD758300
US063100
US135100
WP882000
WP882000
US063100
WP882000
US135100
WP882000
US135100
WP882000
US135100
US135100
WP882000
WP882000
US062470
US046100
US035100
US135100
US135100
US062100
US135100
US064100
US126100
US135100
UR837330
US064100
US135100
US064100
US135100
US062100
UR837330
US135100
✻ New Parts
88
Description
P.C.B.
P.C.B.
P.C.B.
CN.HDMI
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.CE.CHP
DIGITAL
DIGITAL
DIGITAL
19P SE
15P
21P
11P
14P
18P
10uF
0.1uF
0.1uF
1000pF
1000pF
10uF
0.1uF
0.1uF
1000pF
10uF
0.1uF
1000pF
12pF
15pF
0.1uF
10uF
1000pF
0.1uF
10uF
10uF
1000pF
10uF
0.1uF
10uF
0.1uF
10uF
0.1uF
0.1uF
10uF
10uF
470pF
1uF
0.1uF
0.1uF
0.1uF
100pF
0.1uF
0.01uF
1uF
0.1uF
33uF
0.01uF
0.1uF
0.01uF
0.1uF
100pF
33uF
0.1uF
Markets
UCRKALS
T
BGF
6.3V
16V
16V
50V B
50V B
6.3V
16V
16V
50V B
6.3V
16V
50V B
50V B
50V B
16V
10V
50V B
16V
6.3V
6.3V
50V B
6.3V
16V
6.3V
16V
6.3V
16V
16V
6.3V
6.3V
50V B
25V
16V B
16V
16V
50V B
16V
50V B
10V
16V
16V
50V B
16V
50V B
16V
50V B
16V
16V
BGF
BGF
Ref No.
Part No.
C2254-2257
C2258-2260
C2262
C2264-2265
C2266
C2267
C2268
C2269
C2271-2272
C2274
C2274
C2405-2407
C2413
C2415
C2417
C2420
C2421-2422
C2424
C2426-2432
C2434-2443
C2445-2451
C2453
C2454
C2465
C2466
C2601-2604
C2606
C2607-2608
C2611-2614
C2615-2616
C2617
C2618
C2620-2623
C2625-2626
C2627-2628
C2630
C2631
C2632
C2633
C2635-2637
C2638-2639
C2640-2641
C2642
C2643
C2644
C2645-2647
C2648
C2649-2651
C2654
C2655
C2656-2658
C2659
C2660-2661
C2662-2663
C2664-2667
C2667
C2681
US062100
US046100
US046100
US061270
UR867100
US126100
US135100
US062560
US062330
US135100
US135100
US135100
US135100
US135100
US135100
US135100
WP882000
WP882000
US135100
US135100
US135100
US135100
US062100
US135100
WP882000
WP882000
US062180
WK004400
US135100
US063680
US035100
US044220
US135100
WP882000
US061200
US135100
US062100
UR867100
US135100
UR867100
US135100
WJ603600
US064100
US135100
US035100
US062100
UR867100
US062100
UR848100
UR867100
US126100
US064100
US062220
US135100
US062220
US062220
WD758300
✻ New Parts
Description
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.M.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.CE.CHP
C.EL
C.CE.CHP
C.MYLAR
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.CE.CHP
C.EL
C.EL
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
100pF
1uF
1uF
27pF
10uF
1uF
0.1uF
560pF
330pF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
0.1uF
10uF
10uF
0.1uF
0.1uF
0.1uF
0.1uF
100pF
0.1uF
10uF
10uF
180pF
10uF
0.1uF
6800pF
0.1uF
0.022uF
0.1uF
10uF
20pF
0.1uF
100pF
10uF
0.1uF
10uF
0.1uF
820pF
0.01uF
0.1uF
0.1uF
100pF
10uF
100pF
100uF
10uF
1uF
0.01uF
220pF
0.1uF
220pF
220pF
10uF
Markets
50V B
25V
25V
50V B
50V
10V
16V
50V B
50V B
16V
16V
16V
16V
16V
16V
16V
6.3V
6.3V
16V
16V
16V
16V
50V B
16V
6.3V
6.3V
50V B
16V
16V
50V B
16V B
25V B
16V
6.3V
50V B
16V
50V B
50V
16V
50V
16V
50V J
50V B
16V
16V B
50V B
50V
50V B
25V
50V
10V
50V B
50V B
16V
50V B
50V B
10V
BGF
BGF
BGF
BGF
BGF
BGF
BGF
UCRKABGFLS
UCRKABGFLS
UCRKABGFLS
RX-V371/HTR-3064
DIGITAL and OPERATION
Ref No.
Part No.
US135100
UR837330
US135100
WD758300
US135100
WP882000
US135100
VV220700
V2376600
WS692300
WR452500
VT332900
VT332900
X8560A00
YC394A00
X8385A00
YC408A00
X8235A00
X9625B00
YD300B00
YA399A00
X7357A00
X9870A00
YC391A00
YC604A00
X3586B00
X7741A00
VQ986700
WE834500
VR936300
VR936300
VQ986700
VQ986700
WU058300
WF997400
WU058400
WU058400
WJ625200
Description
C.CE.CHP
C.EL
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
DIODE.SCHOTTKY
DIODE.SCHOTTKY
DIODE.ZENR
DIODE.SCHOTTKY
DIODE
DIODE
IC.HDMI.TX
IC
IC
IC.EEPROM
IC
IC
IC.MEMORY
IC
IC
IC
IC
IC
IC
IC
TR
FET
TR
TR
TR
TR
RSNR.CRYS
RSNR.CE
RSNR.CRYS
RSNR.CRYS
RSNR.CRYS
0.1uF
16V
33uF
16V
0.1uF
16V
10uF
10V
0.1uF
16V
10uF
6.3V
0.1uF
16V
RB501V-40
RB500V-40
HZU3.3B2 TRF-E
RB051LA-40
1SS355
1SS355
SII9134CTU HDMI
NJM2884U1-18(TE1)
TC7WHU04FK TE85L
R1EX25032ASA00A
LC72725KM
M12L64164A-5TG
MX29LV160DBTI-70G
LC89058WD-E
PCM1803DBR
PCM1681PWPR
BD9325FJ
NJM2830U1-05(TE1)
TC74VHCT08AFT EL,K
NJM2867F3-05(TE1)
2SC4081 T106
UPA672T-T1-A
2SA1576A T106
2SA1576A T106
2SC4081 T106
2SC4081 T106
27MHz
20MHz
4.332MHz
4.332MHz
24.576MHz
P.C.B.
P.C.B.
P.C.B.
P.C.B.
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
FUSE.HOLDER
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
OPERATION
OPERATION
OPERATION
OPERATION
15P
9P
4P
6P
9P
3P
CLIP PFC5000-0202F
2P
4P
18P
9P
13P
Markets
BGF
(written)
BGF
BGF
*
WU124500
*
WW703400
WU124800
*
WW703500
CB101
VM929900
CB104
VQ047200
CB132
VK026300
CB134
VK026500
CB135
LB919090
CB136
VK024700
CB152-153 WN077700
⚠ CB154-155 VG879900
CB166
VB858300
CB191-192 VQ962100
CB193
VQ044400
CB194
VM923600
✻ New Parts
UC
RS
T
KABGFL
*
*
⚠
*
*
*
Ref No.
Part No.
CB195-196
C1001-1002
C1003-1004
C1005
C1006
C1007
C1008
C1009-1011
C1013
C1014
C1015
C1016
C1017
C1018
C1019-1020
C1021-1022
C1023
C1024-1025
C1026-1027
C1028-1029
C1301
C1302-1303
C1304
C1305
C1306
C1307
C1308
C1309
C1310-1311
C1312
C1313-1316
C1317
C1318
C1319
C1320
C1322
C1322
C1323
C1323
C1326
C1326
C1451-1452
C1501
C1501
C1502
C1502
C1503
C1504
C1504
C1505-1506
C1507
C1651
C1651
C1652
C1652
C1653
C1653
VQ963900
US065100
US062100
US135100
US061100
US135100
UM397100
US135100
UR268220
UM388330
US135100
US061680
US065100
US064100
US065100
US044220
US064100
US044220
US135100
US062220
UR866100
UR837470
US064100
US065100
US135100
UR837470
UR866100
UR837100
UR866100
UR866100
UR866100
UR739470
UR749470
UR749220
UR73A100
VE326000
VR168300
VE326000
VR168300
WJ605000
WV365900
US063100
UR759220
UR749220
WJ605000
WV365900
UR897100
WJ605000
WV365900
WJ610200
WQ939400
WJ605000
WV365900
WJ605000
WV365900
WJ605000
WV365900
Description
CN.BS.PIN
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.CE.CHP
C.EL
C.EL
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.EL
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.EL
C.EL
C.EL
C.EL
C.EL
C.EL
C.EL
C.EL
C.EL
C.MYLAR
C.MYLAR
C.MYLAR
C.MYLAR
C.MYLAR
C.MYLAR
C.CE.CHP
C.EL
C.EL
C.MYLAR
C.MYLAR
C.EL
C.MYLAR
C.MYLAR
C.MYLAR
C.CE.SAFTY
C.MYLAR
C.MYLAR
C.MYLAR
C.MYLAR
C.MYLAR
C.MYLAR
18P
0.1uF
100pF
0.1uF
10pF
0.1uF
10uF
0.1uF
220uF
330uF
0.1uF
68pF
0.1uF
0.01uF
0.1uF
0.022uF
0.01uF
0.022uF
0.1uF
220pF
1uF
47uF
0.01uF
0.1uF
0.1uF
47uF
1uF
10uF
1uF
1uF
1uF
4700uF
4700uF
2200uF
10000uF
0.1uF
0.1uF
0.1uF
0.1uF
0.01uF
0.01uF
1000pF
2200uF
2200uF
0.01uF
0.01uF
10uF
0.01uF
0.01uF
0.01uF
0.01uF
0.01uF
0.01uF
0.01uF
0.01uF
0.01uF
0.01uF
Markets
50V B
50V B
16V
50V B
16V
16V
16V
50V
6.3V
16V
50V B
50V B
50V B
50V B
25V B
50V B
25V B
16V
50V B
50V
16V
50V B
50V B
16V
16V
50V
16V
50V
50V
50V
16V
25V
25V
16V
50V
50V
50V
50V
50V J
50V J
50V B
35V
25V
50V J
50V J
100V
50V J
50V J
100V
250V
50V J
50V J
50V J
50V J
50V J
50V J
UC
UC
RX-V371/HTR-3064
C2682
C2683
C2684
C2687
C2688
C2692-2693
C2701-2707
D2022
D2023
D2201-2204
D2601-2602
D2607
D2610
IC202
IC203
IC204
IC222
IC223
IC242
* IC243
IC261
IC262
IC263
IC264-265
IC266
IC267
IC268
Q2001-2008
Q2009
Q2201-2203
Q2205
Q2206
Q2206
XL201
XL221
XL222
XL222
XL261
UC
UC
RS
KABGFL
RS
UCT
KABGFL
RS
✻ New Parts
89
RX-V371/HTR-3064
OPERATION and MAIN
Ref No.
RX-V371/HTR-3064
C1654
* C1654
C1701
C1702-1704
C1705
C1706
C1707
C1708
C1709
C1710
C1711-1712
C1713-1714
D1001-1002
D1003-1006
D1301
D1302
D1303
D1304
D1305-1306
⚠ D1307
⚠ D1308-1309
D1311-1312
D1313-1314
D1501
⚠ D1502
⚠ D1503-1504
⚠ D1505
⚠ D1506-1507
D1508-1509
D1510
D1651
D1652-1653
D1701-1702
D1703
⚠ F1501
⚠ F1501
⚠ F1501
IC101
IC102
⚠ IC131
IC132
⚠ IC133
⚠ IC134
⚠ IC135
JK101
JK166
JK171
PJ101
Q1001-1008
Q1301
Q1302
Q1303
Q1304
⚠ Q1501
⚠ Q1502
⚠ Q1503
⚠ Q1504
Part No.
WJ605000
WV365900
US064100
US063100
UM397100
UM397220
US062100
UM387470
US061330
UM397100
UM397220
US065100
WS693300
VT332900
VV220700
VU171900
VT332900
VG439500
VT332900
WH487300
WA653100
VT332900
VT332900
VU171800
VG437000
VS997800
VS997800
VS997800
WC398800
VU171800
VU172500
VT332900
VT332900
VU171900
WB221200
WM933100
VV071700
X6386A00
X7378A00
X6248A00
X4928A00
X4153A00
X4154A00
X4928A00
WJ117400
V9408200
WJ117300
WJ117500
WC529400
WC435100
WC529400
WJ173600
WC435100
WJ173600
iA1015I0
VP872600
iA1015I0
✻ New Parts
90
Description
C.MYLAR
C.MYLAR
C.CE.CHP
C.CE.CHP
C.EL
C.EL
C.CE.CHP
C.EL
C.CE.CHP
C.EL
C.EL
C.CE.CHP
DIODE.ZENR
DIODE
DIODE.SCHOTTKY
DIODE.ZENR
DIODE
DIODE.ZENR
DIODE
DIODE.BRG
DIODE.BRG
DIODE
DIODE
DIODE.ZENR
DIODE.ZENR
DIODE
DIODE
DIODE
DIODE
DIODE.ZENR
DIODE.ZENR
DIODE
DIODE
DIODE.ZENR
FUSE
FUSE
FUSE
IC
IC
IC
IC
IC
IC
IC
JACK.MINI
JACK.PHONE
JACK.PHONE
JACK.PIN
TR
TR.DGT
TR
TR
TR.DGT
TR
TR
TR
TR
0.01uF
50V J
0.01uF
50V J
0.01uF
50V B
1000pF
50V B
10uF
16V
22uF
25V
100pF
50V B
47uF
16V
33pF
50V B
10uF
16V
22uF
25V
0.1uF
50V B
HZU4.3B3 TRF-E
1SS355
RB501V-40
UDZS5.1B 5.1V
1SS355
MTZJ10B
10V
1SS355
RS203M 2.0A 200V
KBP103G 1A 200V
1SS355
1SS355
UDZS4.7B 4.7V
MTZJ4.7A 4.7V
1T2
1T2
1T2
KDS160-RTK
UDZS4.7B 4.7V
UDZS9.1B
1SS355
1SS355
UDZS5.1B 5.1V
6A 125V
T5A 250V
3.15A 250V
M66003-0131FP
NJM4565M(TE1)
NJM2388F33
KIA7805API 5V
KIA7812API
KIA7912PI
KIA7805API 5V
YPAO MIC
VIDEO AUX
PHONES
3P
KTC3875S Y GR RTK
KRC104S-RTK
KTC3875S Y GR RTK
2SC1815Y TP
KRC104S-RTK
2SC1815Y TP
2SA1015 Y
2SA1708 S,T
2SA1015 Y
Markets
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
RTKABGFLS
Ref No.
Part No.
Q1505
R1316
R1322
R1323
R1508
R1651-1652
SW101-114
SW116-119
SW145
SW151
SW171
T1501
T1501
T1501
TH1
TH2
U1001
V1001
WC529200
HV754180
WJ681600
WJ682000
VC757900
WJ685600
WD483100
WD483100
V9597100
V9366900
WD483100
X8521A00
X8522A00
X8523A00
WT698300
WT698300
WQ600700
WQ842100
WA790900
TR.DGT
R.CAR.FP
R.MTL.FLM
R.MTL.FLM
R.MTL.OXD
R.MTL.FLM
SW.TACT
SW.TACT
SW.RT.ENC
RELAY
SW.TACT
TRANS.PWR
TRANS.PWR
TRANS.PWR
THERMISTOR
THERMISTOR
L.DTCT
FL.DSPLY
FL.SPACER
Description
KRC102M-AT
18Ω
1/4W
0.22Ω
1W
0.47Ω
1W J
47Ω
2W
470Ω
1W J
SKRGAAD010
SKRGAAD010
EC12E2460802
DLS9D1-O(M)0.25W
SKRGAAD010
Markets
WW712800
WW712900
WW713000
VQ047600
LB932060
VQ963900
VM923600
V9377900
WV365900
UR837100
UR877220
WJ608500
UR896470
WJ608500
UR896470
UR877220
UR896470
WJ608500
WJ608100
UR867330
WJ608100
UR867330
WJ608100
UR867330
WJ608100
UR897100
FG650500
WJ608100
UR867330
UR866100
FG650500
WV366700
UR866470
UR828220
UR878100
P.C.B.
P.C.B.
P.C.B.
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
CN.BS.PIN
C.MYLAR
C.EL
C.EL
C.MYLAR
C.EL
C.MYLAR
C.EL
C.EL
C.EL
C.MYLAR
C.MYLAR
C.EL
C.MYLAR
C.EL
C.MYLAR
C.EL
C.MYLAR
C.EL
C.CE
C.MYLAR
C.EL
C.EL
C.CE
C.MYLAR
C.EL
C.EL
C.EL
MAIN
MAIN
MAIN
21P
6P
18P
13P
4P
0.01uF
10uF
22uF
470pF
4.7uF
470pF
4.7uF
22uF
4.7uF
470pF
100pF
33uF
100pF
33uF
100pF
33uF
100pF
10uF
5pF
100pF
33uF
1uF
5pF
0.047uF
4.7uF
220uF
100uF
RS
UC
RS
UC
RS
TKABGLF
WC92NA103J1
WC92NA103J1
SM3385VMH6
18-MT-09GNK
4.6x10x32
UC
UC
UC
RS
RS
UC
RS
TKABGFL
UC
RS
RS
RS
*
*
*
CB1
CB3
CB21-22
CB41
CB51
* C1
C2-6
C7
C8
C9
C10
C11
C12
C13-14
C15-17
C18
C19
C20
C21-22
C23
C24
C25
C26
C27
C28
C29
C30
C31-34
* C35-39
C40
C41
C43
✻ New Parts
UCTA
RS
KBGFL
RS
50V J
16V
63V
100V
100V
100V
100V
63V
100V
100V
100V
50V
100V
50V
100V
50V
100V
100V
50V
100V
50V
50V
50V
50V J
50V
10V
63V
RX-V371/HTR-3064
MAIN
*
*
*
*
*
Part No.
UR867100
UR868100
WE514200
WV365900
WJ611400
US064100
WV365900
US064100
US135100
US061220
US062220
US061470
US062220
US135100
VR169200
US135100
US061470
UR837100
US135100
UR867470
US135100
UR837100
US062680
WV366700
US062100
US062100
WV365600
UR837100
UR837100
US135100
VR169000
UR838100
WV366500
UR838100
UR837330
UR838100
WV366300
UR838100
UR867100
UR267100
UR867100
UR867470
US062100
UR267470
UR267100
US135100
US135100
WE773800
WE773800
US060800
US062100
US135100
UR837470
US135100
UR837100
US135100
UR837100
✻ New Parts
Description
C.EL
C.EL
C.EL
C.MYLAR
C.MYLAR
C.CE.CHP
C.MYLAR
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.MYLAR
C.CE.CHP
C.CE.CHP
C.EL
C.CE.CHP
C.EL
C.CE.CHP
C.EL
C.CE.CHP
C.MYLAR
C.CE.CHP
C.CE.CHP
C.MYLAR
C.EL
C.EL
C.CE.CHP
C.MYLAR
C.EL
C.MYLAR
C.EL
C.EL
C.EL
C.MYLAR
C.EL
C.EL
C.EL
C.EL
C.EL
C.CE.CHP
C.EL
C.EL
C.CE.CHP
C.CE.CHP
C.CE.M.CHP
C.CE.M.CHP
C.CE.CHP
C.CE.CHP
C.CE.CHP
C.EL
C.CE.CHP
C.EL
C.CE.CHP
C.EL
10uF
100uF
6800uF
0.01uF
0.1uF
0.01uF
0.01uF
0.01uF
0.1uF
22pF
220pF
47pF
220pF
0.1uF
0.47uF
0.1uF
47pF
10uF
0.1uF
47uF
0.1uF
10uF
680pF
0.047uF
100pF
100pF
6800pF
10uF
10uF
0.1uF
0.33uF
100uF
0.033uF
100uF
33uF
100uF
0.022uF
100uF
10uF
10uF
10uF
47uF
100pF
47uF
10uF
0.1uF
0.1uF
1uF
1uF
8pF
100pF
0.1uF
47uF
0.1uF
10uF
0.1uF
10uF
Markets
50V
50V
63V
50V J
100V J
50V B
50V J
50V B
16V
50V B
50V B
50V B
50V B
16V
50V
16V
50V B
16V
16V
50V
16V
16V
50V B
50V J
50V B
50V B
50V J
16V
16V
16V
50V
16V
50V J
16V
16V
16V
50V J
16V
50V
50V
50V
50V
50V B
50V
50V
16V
16V
10V B
10V B
50V B
50V B
16V
16V
16V
16V
16V
16V
Ref No.
Part No.
C423
C425-426
C428
C432
C433
C434
C435-437
C438
D1-2
D3
D4-8
⚠ D9
D10-11
⚠ D12-14
D15-17
⚠ D18
⚠ D19
D20
D22
D201-202
D401
⚠ * IC1
⚠ * IC2
IC21
IC22
IC23-25
IC27
IC41
IC42
IC43
PJ21
PJ22
PJ24
PJ26
PJ41
PJ42
PJ43-44
PJ45
⚠ Q1
⚠ Q2-3
⚠ Q4
⚠ Q5-6
⚠ Q7-11
⚠ Q12
⚠ Q13-16
⚠ Q17-20
⚠ Q21
Q22
Q23
Q24
Q201-205
Q208-209
Q401
⚠ R6-7
⚠ R10
⚠ R18
⚠ R22
UR837470
UR837470
UR837470
UR838220
US135100
UR837470
US135100
UR837470
VD631600
VU171900
WC398800
VD631600
VN008700
VD631600
VN008700
VG444700
WA653200
WU201600
VD631600
VG438400
VU172000
YD335A00
YD336A00
YA361A00
XZ509A00
X7378A00
X7378A00
X7362A00
XY549A00
X6742A00
V7046700
V7189700
V9420700
V7046800
WH380800
V7189800
V7190000
WG505100
WC398400
WG538600
WC398400
WC397700
WC398400
WC397700
WC434900
WC435000
VP872600
iC1815I0
WC435000
WC434900
WC883400
WC883400
WC397700
HV753220
HV755560
HV754100
HV754100
Description
C.EL
C.EL
C.EL
C.EL
C.CE.CHP
C.EL
C.CE.CHP
C.EL
DIODE
DIODE.ZENR
DIODE
DIODE
DIODE
DIODE
DIODE
DIODE.ZENR
DIODE.BRG
DIODE
DIODE
DIODE.ZENR
DIODE.ZENR
IC.AMP
IC.AMP
IC
IC
IC
IC
IC
IC
IC
JACK.PIN
JACK.PIN
JACK.PIN
JACK.PIN
JACK.PIN
JACK.PIN
JACK.PIN
JACK.PIN
TR
TR
TR
TR
TR
TR
TR.DGT
TR.DGT
TR
TR
TR.DGT
TR.DGT
TR
TR
TR
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.CAR.FP
Markets
47uF
16V
47uF
16V
47uF
16V
220uF
16V
0.1uF
16V
47uF
16V
0.1uF
16V
47uF
16V
1SS133,176
UDZS5.1B 5.1V
KDS160-RTK
1SS133,176
1SS270A
1SS133,176
1SS270A
MTZ J 39D 39.0V TP
TS6P03G 6A 200V
1N4003S TP
1SS133,176
MTZJ6.8C 6.8V
UDZS5.6B 5.6V
STK433-330F-E
STK433-130F-E
R2A15220FP
TC74VHCU04FT INVER
NJM4565M(TE1)
NJM4565M(TE1)
NJM2586AM(TE2)
TC74HC4051AFEL
LA73050-TLM-E
4P MSP-244V1-01NI
1P
2P MSP-252V1-30NI
6P MSP-246V1-01NI
3P JACK G,B,R
1P
2P
6P
2N5551C-AT
KTA1046-Y-U/P
2N5551C-AT
2N5401C-AT
2N5551C-AT
2N5401C-AT
KRA104S-RTK
KRC102S-RTK
2SA1708 S,T
2SC1815 Y
KRC102S-RTK
KRA104S-RTK
2SD2704 K
2SD2704 K
2N5401C-AT
2.2Ω
1/4W
560Ω
1/4W
10Ω
1/4W
10Ω
1/4W
RX-V371/HTR-3064
*
Ref No.
C44
C45
C46-47
C50-53
C54-55
C56
C59-64
C202
C203-204
C205-206
C209-210
C211-212
C213-216
C217
C218
C219
C222-223
C224-227
C228
C229
C230
C231-236
C239-243
C244
C247-249
C251-252
C253
C255-258
C261-262
C264
C265-266
C267
C268-269
C270
C271
C272
C274-275
C276-279
C280
C281-283
C284-285
C288-289
C290
C291-292
C293
C294-299
C302-303
C401
C404-408
C410-412
C413-414
C415
C416
C417-418
C419
C420-421
C422
✻ New Parts
91
RX-V371/HTR-3064
MAIN
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
RX-V371/HTR-3064
⚠
Ref No.
Part No.
R33
R36
R40
R48-49
R64
R66
R68
R71-72
R74
R78-79
R82-83
R87
R90
R105-109
R112
R214
R242
R291
R297
R314
R316
R425
R433
RY1-4
RY5
* SW51
TE1
TE1
TE2
* U201-202
WP839400
WP839400
WP839400
WP839400
HV754100
HV754100
HV754100
HV754100
WB625100
WB625100
WB625100
HV756220
HV753100
HV753470
HV753220
HV755220
HV753100
HV753220
HV753220
WJ684700
WJ684700
HL004390
HV753100
WJ122400
WE648700
WV382900
WK560800
WK560900
WB214000
WU204200
WE774200
✻ New Parts
92
Description
R.CEMENT
R.CEMENT
R.CEMENT
R.CEMENT
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.MTL.FLM
R.MTL.FLM
R.MTL.FLM
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.CAR.FP
R.MTL.FLM
R.MTL.FLM
R.MTL.OXD
R.CAR.FP
RELAY
RELAY
SW.SLIDE
TERM.SP
TERM.SP
TERM.SP
CN.PHOTO.R
SCR.BND.HD
Markets
Ref No.
Part No.
0.22+0.22 3W
0.22+0.22 3W
0.22+0.22 3W
0.22+0.22 3W
10Ω
1/4W
10Ω
1/4W
10Ω
1/4W
10Ω
1/4W
4.7Ω
1W J
4.7Ω
1W J
4.7Ω
1W J
2.2KΩ
1/4W
1Ω
1/4W
4.7Ω
1/4W
2.2Ω
1/4W
220Ω
1/4W
1Ω
1/4W
2.2Ω
1/4W
2.2Ω
1/4W
82Ω
1W
82Ω
1W
39Ω
1/2W
1Ω
1/4W
981-2A-24DS-SP7
DC DH24D2-O-Q
SL14
RS
4P MST-204V1-01 NC UCRTAS
4P MST-204V1-01 WC KBGFL
6P PUSH MSP-115V2
1P JSR1165-D
3x10
MFZN2W3
✻ New Parts
Description
Markets
RX-V371/HTR-3064
Carbon Resistors
Value
1.0 Ω
1.8 Ω
2.2 Ω
3.3 Ω
4.7 Ω
5.6 Ω
10 Ω
15 Ω
22 Ω
27 Ω
33 Ω
39 Ω
47 Ω
56 Ω
68 Ω
75 Ω
82 Ω
91 Ω
100 Ω
110 Ω
120 Ω
150 Ω
160 Ω
180 Ω
200 Ω
220 Ω
270 Ω
330 Ω
390 Ω
430 Ω
470 Ω
510 Ω
560 Ω
680 Ω
820 Ω
910 Ω
1.0 kΩ
1.2 kΩ
1.5 kΩ
1.8 kΩ
2.0 kΩ
2.2 kΩ
2.4 kΩ
2.7 kΩ
3.0 kΩ
3.3 kΩ
3.6 kΩ
3.9 kΩ
4.7 kΩ
5.1 kΩ
5.6 kΩ
6.8 kΩ
8.2 kΩ
9.1 kΩ
10 kΩ
1/4W Type Part No. 1/6W Type Part No.
HJ35 3100
HF85 3100
HJ35 3180
✻
HJ35 3220
HF85 3220
HJ35 3330
HF85 3330
HJ35 3470
HF85 3470
HJ35 3560
HF85 3560
HF45 4100
HF45 4100
HJ35 4150
HF85 4150
HF45 4220
HF45 4220
HJ35 4270
HF85 4270
HF45 4330
HF45 4330
HJ35 4470
HF85 4390
HF45 4470
HF45 4470
HF45 4560
HF45 4560
HF45 4680
HF45 4680
HF45 4750
HF45 4750
HF45 4820
HF45 4820
HF45 4910
HF45 4910
HF45 5100
HF45 5100
HJ35 5110
HF85 5110
HF45 5120
HF45 5120
HF45 5150
HF45 5150
HJ35 5160
✻
HF45 5180
HF45 5180
HF45 5200
HF45 5200
HF45 5220
HF45 5220
HF45 5270
HF45 5270
HF45 5330
HF45 5330
HF45 5390
HF45 5390
HF45 5430
HF45 5430
HF45 5470
HF45 5470
HF45 5510
HF45 5510
HF45 5560
HF45 5560
HF45 5680
HF45 5680
HF45 5820
HF45 5820
HF45 5910
HF45 5910
HF45 6100
HF45 6100
HF45 6120
HF45 6120
HF45 6150
HF45 6150
HF45 6180
HF45 6180
HJ35 6200
HF85 6200
HF45 6220
HF45 6220
HJ35 6240
HF85 6240
HF45 6270
HF45 6270
HF45 6300
HF45 6300
HF45 6330
HF45 6330
HJ35 6360
HF85 6360
HF45 6390
HF45 6390
HF45 6470
HF45 6470
HF45 6510
HF45 6510
HF45 6560
HF45 6560
HF45 6680
HF45 6680
HF45 6820
HF45 6820
HF45 6910
HF45 6910
HF45 7100
HF45 7100
Value
11 kΩ
12 kΩ
13 kΩ
15 kΩ
18 kΩ
22 kΩ
24 kΩ
27 kΩ
30 kΩ
33 kΩ
36 kΩ
39 kΩ
47 kΩ
51 kΩ
56 kΩ
62 kΩ
68 kΩ
82 kΩ
91 kΩ
100 kΩ
110 kΩ
120 kΩ
130 kΩ
150 kΩ
180 kΩ
220 kΩ
270 kΩ
300 kΩ
330 kΩ
390 kΩ
470 kΩ
560 kΩ
680 kΩ
820 kΩ
1.0 MΩ
1.2 MΩ
1.5 MΩ
1.8 MΩ
2.2 MΩ
3.3 MΩ
3.9 MΩ
4.7 MΩ
1/4W Type Part No. 1/6W Type Part No.
HF45 7110
HF45 7110
HJ35 7120
HF85 7120
HF45 7130
HF45 7130
HF45 7150
HF45 7150
HF45 7180
HF45 7180
HF45 7220
HF45 7220
HF45 7240
HF45 7240
HJ35 7270
HF85 7270
HF45 7300
HF45 7300
HF45 7330
HF45 7330
HF45 7360
HF45 7360
HF45 7390
HF45 7390
HF45 7470
HF45 7470
HF45 7510
HF45 7510
HF45 7560
HF45 7560
HF45 7620
HF45 7620
HF45 7680
HF45 7680
HF45 7820
HF45 7820
HF45 7910
HF45 7910
HF45 8100
HF45 8100
HF45 8110
HF45 8110
HF45 8120
HF45 8120
HF45 8130
✻
HF45 8150
HF45 8150
HF45 8180
HF45 8180
HJ35 8220
HF85 8220
HF45 8270
HF45 8270
HF45 8300
HF45 8300
HF45 8330
HF45 8330
HJ35 8390
HF85 8390
HF45 8470
HF45 8470
HJ35 8560
HF85 8560
HJ35 8680
HF85 8680
HJ35 8820
HF85 8820
HF45 9100
HF45 9100
HJ35 9120
✻
HJ35 9150
HF85 9150
HJ35 9180
HF85 9180
HJ35 9220
HF85 9220
HJ35 9330
HF85 9330
HJ35 9390
✻
HJ35 9470
HF85 9470
1/4W Type
HF45
1/4W Type
HJ35
1/6W Type
HF85
10mm
5mm
❊ : Not available
93
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
1
16
● OVERALL ASSEMBLY
203
L model
200
17
156
103
160
160
157
200-1
2
165
R, S models
204 R, K, A, B, G, F, L, S models
160
103
101
12
165
160
202 U, C, R, T, L, S models
20
2-1 (3)
160
205
7
3
171
202 K, A, B, G, F models
206 T model
2-21
2-104
1-1 (2)
2-104
22
2-104
2-22
2-20
2-1 (2)
4
2-105
171
1-1 (7)
170
1-25
15
1-1 (5)
163
170
1-1 (3)
167
1-25
21
168
168
167
2-104
167
1-25
168
5
1-1 (1)
2-103
1-25
1-7
1-1 (4)
1-5 (2)
1-2
1-6
2-104
109 (b)
151
2-1 (1)
1-1 (8)
167
167
1-4
2-104
1-3
6
1-13
1-25
1-5 (1)
109 (a)
2-1 (4)
1-12
163
1-1 (6)
1-25
152
2-104
120
1-1 (9)
121
163
7
163
94
152
120
163
RX-V371/HTR-3064
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
*
*
*
*
Ref No.
1-1
1-1
1-1
1-1
1-2
1-3
1-4
1-4
1-4
1-4
1-4
1-4
1-5
1-5
1-5
1-5
1-6
1-7
1-12
1-13
1-13
1-13
1-13
1-25
2-1
2-1
2-1
2-20
2-21
2-22
2-103
2-104
2-105
7
7
7
12
12
15
15
15
15
15
15
16
16
16
16
16
16
16
16
17
20
21
22
101
101
101
101
✻ New Parts
Part No.
WU124500
WW703400
WU124800
WW703500
WR389500
WR382900
WW673600
WW673300
WW674100
WW673700
WW674400
WW673700
WT829300
WT829100
WT829200
WT829400
WT829500
WT829600
WU200600
WW361000
WW361100
WW361200
WW361300
WE774800
WW712800
WW712900
WW713000
WG451000
WT832200
WW117500
WE774600
WF002600
WE774300
WW703100
WW703200
WW703300
WQ756600
WQ756700
YC395A00
YD211A00
YC397A00
YD212A00
YD213A00
YD214A00
WB120500
WC992700
WV836600
WC753000
WC743700
WB212200
WB212300
WV583400
V2438700
WR384800
WR395700
WR386600
WT825100
WT824900
WT825000
WT825200
Description
P.C.B. ASSEMBLY
OPERATION
P.C.B. ASSEMBLY
OPERATION
P.C.B. ASSEMBLY
OPERATION
P.C.B. ASSEMBLY
OPERATION
FLEXIBLE FLAT CABLE
15P 180mm
FLEXIBLE FLAT CABLE
9P 180mm
FRONT PANEL
FRONT PANEL
FRONT PANEL
FRONT PANEL
FRONT PANEL
FRONT PANEL
BUTTON
CASE
BUTTON
CASE
BUTTON
CASE
BUTTON
CASE
BUTTON
TUNER
BUTTON
POWER
EARTH PLATE
WINDOW
WINDOW
WINDOW
WINDOW
BIND HEAD P-TIGHT SCREW
3x8
P.C.B. ASSEMBLY
MAIN
P.C.B. ASSEMBLY
MAIN
P.C.B. ASSEMBLY
MAIN
TR SUPPORT
5P
TR SUPPORT
2P
P.C.B. SUPPORT
IC SCREW
3x18
PW HEAD B-TIGHT SCREW
3x8
BIND HEAD B-TIGHT SCREW
3x8
P.C.B. ASSEMBLY
DIGITAL
P.C.B. ASSEMBLY
DIGITAL
P.C.B. ASSEMBLY
DIGITAL
AM/FM TUNER
FAEH06-A
AM/FM TUNER
FAEH06-E
POWER TRANSFORMER
POWER TRANSFORMER
POWER TRANSFORMER
POWER TRANSFORMER
POWER TRANSFORMER
POWER TRANSFORMER
POWER CABLE
2m
POWER CABLE
2m
POWER CABLE
2m
POWER CABLE
2m
POWER CABLE
2m
POWER CABLE
2m
POWER CABLE
2m
POWER CABLE
2m
CORD STOPPER
10P1
FLEXIBLE FLAT CABLE
11P 120mm
FLEXIBLE FLAT CABLE
21P 100mm
FLEXIBLE FLAT CABLE
13P 70mm
TOP COVER
TOP COVER
TOP COVER
TOP COVER
Remarks
Markets
UC
RS
T
KABGFL
P=1.25
P=1.25
GD
BL
TI
V371SI
3064SI
3064SI
GD
BL
TI
SI
V371
3064
V371
3064
CR
G
UCT
UCT
RKABGFLS
RKABGFLS
MFZN2W3
UC
RS
MFZN2W3
MFZN2W3
MFZN2W3
UCRKALS
T
BGF
UCRTLS
KABGF
UC
RS
T
K
AL
BGF
UC
R
T
K
A
B
GFL
S
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Ref No.
103
103
103
103
103
103
103
103
103
103
103
103
103
103
109
120
120
121
121
121
121
151
152
156
157
160
163
165
167
168
170
171
171
200
200
* 200
200-1
202
202
203
204
205
205
205
205
205
205
206
Part No.
WW596300
WW597200
WW596500
WW597400
WW596600
WW597500
WW596700
WW597600
WW596800
WW597700
WW596900
WW597800
WW597000
WW597900
WA796100
WE622200
WE622000
WW360800
WW360600
WW360700
WW360900
WB408400
WP126800
WR306100
WJ323900
WE774100
WE774300
WE877900
WF002600
WE774600
WE774700
VD069600
VH313200
Description
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
REAR PANEL
P.C.B. SUPPORT
LEG
D60/H21 GD
LEG
D60/H21 HS
KNOB
D52 VOLUME
KNOB
D52 VOLUME
KNOB
D52 VOLUME
KNOB
D52 VOLUME
DAMPER
10x30 t=4
DAMPER
SCREW MASK
TOP SHEET
TOP RIVET
BIND HEAD BONDING B-T. SCREW
3x8
MFZN2B3
BIND HEAD B-TIGHT SCREW
3x8
MFZN2W3
BIND HEAD S-TIGHT SCREW
3x6
MFZN2W3
PW HEAD B-TIGHT SCREW
3x8
MFZN2W3
IC SCREW
3x18
MFZN2W3
BIND HEAD S-TIGHT SCREW
4x10
MFZN2W3
PW HEAD S-TIGHT SCREW
4x8-10
MFNI33
PW HEAD S-TIGHT SCREW
4x8-10
MFNI3BL
WT926700
WT926800
WW510500
AAX82380
WV354900
WV349600
WB212600
WN649600
WT976200
WT976000
WT976100
WT976300
WU190200
WT976300
WU183100
ACCESSORIES
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL
BATTERY COVER
INDOOR FM ANTENNA
INDOOR FM ANTENNA
AM LOOP ANTENNA
YPAO MICROPHONE
VIDEO AUX INPUT FRONT
VIDEO AUX INPUT FRONT
VIDEO AUX INPUT FRONT
VIDEO AUX INPUT FRONT
VIDEO AUX INPUT FRONT
VIDEO AUX INPUT FRONT
RCU SHEET
BATTERY
SERVICE TOOL
WW483800 P.C.B. CHECKING JIG
P=1.25
P=1.25
P=1.25
RAV331
RAV332
RAV433
COVER
COVER
COVER
COVER
COVER
COVER
1.4m 1pc
1.4m 1pc
1.0m 1pc
6.0m 1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
R03,AAA,UM-4 2pcs
Remarks
V371
3064
V371
3064
V371
3064
V371
3064
V371
3064
V371
3064
V371
3064
Markets
UC
UC
RS
RS
T
T
K
K
A
A
BGF
GF
L
L
GD
BL, TI, SI
GD
BL
TI
SI
L
L
GD, TI, SI
BL
000-213210010
000-213210020
000-213240010
CG-2209
UCRKALS
T
BGF
UCRTLS
KABGF
EM6022L-HN1700
GD
BL
TI
V371SI
3064SI
3064SI
RKABGFLS
R
G
T
for RX-V367/RX-V371
GD
BL
TI
SI
✻ New Parts
95
A
B
C
D
E
F
G
H
I
J
RX-V371/HTR-3064
■ REMOTE CONTROL
1
● RAV331: U, C, R, K, A, L, S models / RAV332: T model / RAV433: B, G, F models
SCHEMATIC DIAGRAMS
PANELS
RAV331
(U, C, R, K, A, L, S models)
RAV331, RAV332
VCC
MODEL
RAV331
RAV332
In-system programming point
OPTION
X
X
INPUT
4.7K
2
9
78
R7
D2
0
75
74
1
VDD
5
TV VOL
+
+10
79
6
TV CH
+
76
80
2
RAV433
(B, G, F models)
ENT
77
7
RAV332
(T model)
81
3
8
4
R3
70
66
10 ohms
R9
47 ohms
0 ohm
58
62
OPTION
ZONE2
Main
51
48
SW1
SETUP
ZONE3
U1
D1
1
2
VSS
3
R5
3
4
TP1
5
R6
6
150 ohms
7
8
X1
8.00 MHz
1
3
Q1
C1
+
47 uF
C2
9
10
2
72
68
73
69
59
63
60
64
61
65
ENTER
52
BD
DVD
56K
1M
67
RETURN
R8
IR_DIODE
71
REC
R2
R4
11
1M
12
13
14
0.1 uF
PC3
VDD
PD2
VSS
PC2/T2
XOUT
PC1/REM/T1
XIN
PC0/T0/ISPSS
ISPSEL
PB7
PA0
PB6/T2EX
MISO/PA1
PB5
PA2
PA3
PA3
PA4
PB3/TXD1
PA5
PB2/RXD1
PA6
PB1/TXD0/MOSI
PA7
PB0/RXD0/SPSCK
PC5
PC4
28
27
49
53
41
45
42
MUSIC
25
INFO
24
AM
FM
46
RADIO
43
38
MEMORY
SUR.
DECODE
34
PRESET
35
PRESET TUNING
24
28
22
V-AUX
21
25
29
TUNER
26
30
[A]
27
31
[B]
DOCK / [C]
20
19
20
16
18
17
AV
5
17
16
AV
1
8
12
15
AV
2
HDMI
2
SOURCE
5
1
TOP
MENU
82
AV
3
55
MENU
56
19
AUDIO
1
10
HDMI
1
4
MUTE
1 ohm
18
9
CODE
SET
SW2
R1
14
HDMI
3
6
SLEEP
2
TV VOL
-
AV
4
11
HDMI
4
7
TV CH
-
83
MUTE
RAV433
These PADs are test point for ISP in the production line
VCC
VCC
R3
5
MODEL
C1
IR_DIODE
+
C2
0.1 uF
47 uF
RAV433
D2
LED
R1
OPTION
D3 D4 D5
X
X O
OPTION
R5
4.7K
1 ohm
D4
R2
DAN202K
Q1
Q2
100 ohms
E2
D3
VDD
STRAIGHT
U1
M34286G2GP
VSS
1
R6
5.1K
2
3
XIN
VDD
CARR
19
D0
D1
5
XOUT
D2
16
6
E0
D3
15
G0
D4
G1
D5
G2
D6
G3
D7
8
9
10
17
63
59
64
48
52
SETUP
44
40
TUNER
20
49
TV
41
RETURN
FM
24
MOVIE
DAN202K
D5
AV
1
AV
2
9
HDMI
1
4
HDMI
2
5
G1
PRESET
AUDIO
1
PRESET
AV
3
RECEIVER
AUDIO
2
HDMI
3
AV
4
11
DOCK
19
E0
TUNING
27
15
6
G0
TUNING
31
30
10
3
54
RADIO
43
26
14
VOLUME
-
ENHANCER
V-AUX SUR.DECODE
STEREO
34
16
35
MEMORY
29
65
47
CD
42
MUSIC
AM
25
8
50
33
INFO
SLEEP
96
61
VOLUME
+
OPTION
46
32
28
AV
5
2
45
BD
DVD
51
12
7
60
ENTER
12
11
57
DAN202K
62
14
13
MUTE
38
18
XIN
7
X1
4.00 MHz
E2
E1
4
6
VSS
20
R4
2.2K
HDMI
4
7
AMP
3
57
84
AUDIO
2
15
4
10 ohms
TUNING
23
DC6688F62SXT
D1
VOLUME
+
47
STRAIGHT ENHANCER
STEREO
33
32
54
OPTION
CD
MOVIE
26
VOLUME
50
TV
40
44
DISPLAY
RCU sheet
RX-V371/HTR-3064
KEY NO. LAYOUT
KEY CODE
RAV331, RAV332
RAV331, RAV332
AMP MODE
1
4
D2
SW2
2
3
5
8
6
9
10
12
14
16
17
18
GROUP
7
11
15
POWER
PRE
SET
No.
19
FUNCTION
(U, C, R, K, A, L, S models)
29
30
31
32
33
34
35
42
44
45
46
48
49
50
51
52
53
55
58
62
56
59
63
60
64
69
70
71
72
73
74
75
76
77
79
80
82
83
84
BD/DVD (SCENE)
7A-007F
7A-007E
K41
TV (SCENE)
7A-037C
7A-037D
7A-0678
CODE SET
–
–
–
O
K42
CD (SCENE)
7A-0679
K2
SLEEP
7A-30
7A-30CE
–
O
K43
RADIO (SCENE)
7A-0976
7A-0977
–
O
K3
RECEIVER
7E-2A
7E-2AD4
7A-84
7A-847A
O
O
K4
7A-4738
7A-4739
O
O
O
O
O
K5
HDMI-1
Default setting
HDMI-2
O
O
K6
K7
HDMI-3
HDMI-4
O
K8
AV-1
O
O
K9
K10
AV-2
AV-3
O
O
K11
K12
AV-4
AV-5
O
O
O
O
K14
K15
K16
K17
AUDIO-1
AUDIO-2
V-AUX
[A]
INPUT 2
–
O
K18
[B]
DOCK
–
O
K19
(U, C, R, K, A, L, S models)
[C] (T model)
–
DSP
K40
O
SW2
O
RADIO
O
–
O
81
ID2
MAIN
O
O
78
ID1
–
65
68
(T model)
MAIN
(U, C, R, K, A, L, S models)
–
54
67
FUNCTION
No.
TRANSMIT
O
66
–
SCENE
Key
MAIN/ZONE2/ZONE3
43
61
–
–
COM
SW1
O
57
[MAIN]
–
SET
LED1
O
47
[MAIN]
GROUP
–
O
41
ID2
MAIN
–
38
40
PRE
ID1
MAIN
–
27
28
(T model)
–
O
26
25
Key
INPUT 1
20
24
COM
O
K20
TUNER
MENU
–
O
K44
SETUP
* enter into HDMI-1 MODE
7A-4A35
7A-4A34
* enter into HDMI-2 MODE
7A-4D32
CURSOR
7A-4D33
* enter into HDMI-3 MODE
7A-502F
7A-502E
* enter into HDMI-4 MODE
7A-532C
7A-532D
* enter into AV-1 MODE
7A-5629
7A-5628
VOLUME
* enter into AV-2 MODE
7A-5926
7A-5927
* enter into AV-3 MODE
7A-5C23
SOURCE
7A-5C22
* enter into AV-4 MODE
7A-5F20
7A-5F21
* enter into AV-5 MODE
7A-651A
7A-651B
* enter into AUDIO-1 MODE
7A-6817
7A-6816
O
K46
–
–
K45
(UP)
7A-9D
–
–
K48
(LEFT)
7A-9F
7A-9F61
–
–
K49
7A-DE
7A-DE20
–
–
K50
–
K51
ENTER
(RIGHT)
RETURN
–
–
K52
–
–
K53
DISPLAY
–
O
K47
–
O
K54
–
O
–
–
–
–
VOLUME (+)
7A-1A
7A-1AE4
VOLUME (-)
7A-1B
7A-1BE5
K57
MUTE
7A-1C
7A-1CE2
–
K55
TOP MENU
–
K56
MENU
–
K1
SOURCE
–
K58
REC
–
–
K59
(STOP)
–
–
K60
(PAUSE)
(PLAY)
–
–
K61
–
K62
–
K63
(FF)
K64
(SKIP -)
* enter into PHONO MODE
7F01-3F
7F01-3FC1
* enter into USB MODE
7F01-4A
7F01-4AB4
* enter into DOCK MODE
7A-16
7A-16E8
* enter into TUNER MODE
–
K65
–
K66
1
–
–
K67
2
–
–
K68
3
–
–
K69
4
–
–
K70
5
–
–
K71
6
–
–
K72
7
–
–
K73
8
–
–
K74
9
K75
0
O
K24
FM
7F01-5827
7F01-5826
–
–
–
O
K25
AM
7F01-552A
7F01-552B
–
–
K76
+10
–
O
K26
PRESET
7F01-5B24
7F01-5B25
–
–
K77
ENT
–
O
K27
TUNING
7F01-611E
7F01-611F
–
–
K78
TV INPUT
–
O
K28
INFO
7A-2758
7A-2759
–
–
K79
TV VOL (+)
–
O
K29
MEMORY
7F01-6718
7F01-6719
–
–
K80
TV CH (+)
–
O
K30
PRESET
7F01-5E21
7F01-5E20
–
K81
TV
–
O
K31
TUNING
7F01-641B
7F01-641A
–
–
K82
TV MUTE
–
O
K32
MOVIE
7A-88
7A-8876
–
–
K83
TV VOL (-)
–
O
K33
MUSIC
7A-89
7A-8977
–
–
K84
TV CH (-)
–
O
K34
ENHANCER/STEREO
7A-94
7A-946A
–
O
K35
SUR. DECODE
7A-8D
7A-8D73
–
O
K38
STRAIGHT
7A-56
7A-56A8
* SOURCE MODE 1/2
(SKIP +)
–
–
–
TV
(SOURCE MODE 1/2)
* enter into SOURCE MODE
(REW)
–
10 key
7A-9E60
7A-AA54
7A-9C62
–
7A-14EA
7A-9E
7A-AA
7F01-609E
–
* enter into V-AUX MODE
7A-9D63
7A-9C
7A-55
7A-14
* enter into AMP MODE
7F01-60
–
(DOWN)
* enter into AUDIO-2 MODE
7A-55AB
7A-6B15
–
–
OPTION
* enter into AMP MODE
7A-6B14
* SOURCE MODE 1/2
* TV MODE
97
RX-V371/HTR-3064
RAV331, RAV332
SOURCE MODE 1/2
D2
1
SOURCE MODE 1 (INPUT1)
SW2
2
3
K6
K7
K8
K9
K10
K11
K12
K14
K15
K16
K17
K18
K19
K20
[HDMI-1]
[HDMI-2]
[HDMI-3]
[HDMI-4]
[AV-1]
[AV-2]
[AV-3]
[AV-4]
[AV-5]
[AUDIO-1]
[AUDIO-1]
[V-AUX]
[A]
[B]
[DOCK]
[TUNER]
FUNCTION
Key
ID1
ID1
ID2
ID1
ID2
ID1
ID2
5
6
8
9
10
11
Library
BD
–
–
–
–
–
CD
–
–
–
–
–
–
TUNER
TUNER
TUNER
TUNER
TUNER
TUNER
14
15
Brand
Yamaha-1
–
–
–
–
–
Yamaha-1
–
–
–
–
–
–
Yamaha-8
Yamaha-13
Yamaha-7
Yamaha-14
Yamaha-3
Yamaha-12
18
19
2064
–
–
–
–
–
5095
–
–
–
–
–
–
5012
5021
5011
5022
5007
5016
16
17
GROUP
24
25
26
27
28
29
30
31
34
35
32
33
41
42
44
45
46
48
49
50
52
51
55
53
56
47
54
57
59
60
61
62
63
64
65
66
67
68
69
SLEEP
K3
RECEIVER
K4
43
58
INPUT 2
71
72
73
74
75
76
77
78
79
80
81
82
83
(T model)
[MAIN]
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
* AMP MODE
HDMI-1
Default setting
K5
HDMI-2
K6
HDMI-3
K7
HDMI-4
K8
AV-1
K9
AV-2
K10
AV-3
K11
AV-4
K12
AV-5
K14
AUDIO-1
K15
AUDIO-2
K16
V-AUX
K17
[A]
K18
[B]
DOCK
K19
70
(U, C, R, K, A, L, S models)
K2
INPUT 1
38
40
No.
Preset No.
POWER
20
(U, C, R, K, A, L, S models)
[C] (T model)
RADIO
84
DSP
SCENE
MENU
CURSOR
K20
TUNER
K24
FM
K25
AM
K26
PRESET
K27
TUNING
K28
INFO
K29
MEMORY
K30
PRESET
K31
TUNING
K32
MOVIE
K33
MUSIC
K34
ENHANCER/STEREO
K35
SUR. DECODE
K38
STRAIGHT
K40
BD/DVD (SCENE)
K41
TV (SCENE)
K42
CD (SCENE)
K43
RADIO (SCENE)
K44
SETUP
K46
OPTION
K45
(UP)
7C-B4
–
–
–
–
–
–
–
–
–
–
–
–
7F01-2E
7F01-2ED0
7F01-0E
7F01-0EF0
K48
(LEFT)
7C-B5
–
–
–
–
–
–
–
–
–
–
–
–
7F01-30
7F01-30CE
7F01-10
7F01-10EE
K49
K50
K51
K52
K53
98
K5
4
12
7
SOURCE MODE 2 (INPUT2)
K4
ENTER
(RIGHT)
RETURN
(DOWN)
DISPLAY
7C-B8
–
–
–
–
–
–
–
–
–
–
–
–
7F01-31
7F01-31CF
7F01-11
7F01-11EF
7C-B6
–
–
–
–
–
–
–
–
–
–
–
–
7F01-32
7F01-32CC
7F01-12
7F01-12EC
7C-B7
–
–
–
–
–
–
–
–
–
–
–
–
7F01-33
7F01-33CD
7F01-13
7F01-13ED
7C-B3
–
–
–
–
–
–
–
–
–
–
–
–
7F01-34
7F01-34CA
7F01-14
7F01-14EA
7C-A6
–
–
–
–
–
79-0A
–
–
–
–
–
–
7F01-35
7F01-35CB
7F01-15
7F01-15EB
* AMP MODE
RX-V371/HTR-3064
RAV331, RAV332
SOURCE MODE 2/2
D2
1
SOURCE MODE 1 (INPUT1)
SW2
2
3
4
5
6
7
GROUP
8
9
10
11
VOLUME
14
15
12
16
17
18
19
26
25
27
28
29
30
31
32
33
34
35
38
40
44
48
41
42
45
46
49
55
43
47
50
52
51
53
56
54
(U, C, R, K, A, L, S models)
10 key
57
K6
K7
K8
K9
K10
K11
K12
K14
K15
K16
K17
K18
K19
K20
[HDMI-1]
[HDMI-2]
[HDMI-3]
[HDMI-4]
[AV-1]
[AV-2]
[AV-3]
[AV-4]
[AV-5]
[AUDIO-1]
[AUDIO-1]
[V-AUX]
[A]
[B]
[DOCK]
[TUNER]
ID1
(T model)
ID1
ID2
ID1
ID2
ID1
ID2
7A-AE
7A-AE50
7A-AB
7A-AB55
[MAIN]
K47
VOLUME (+)
K54
VOLUME (-)
K57
MUTE
K55
TOP MENU
K56
MENU
K1
SOURCE
7C-80
7F01-20
7F01-20DE
7F01-00
7F01-00FE
D1-1B
–
K58
REC
7C-8B
–
–
–
–
–
7A-4F
–
–
–
–
–
–
7F01-36
7F01-36C8
7F01-16
7F01-16E8
–
–
SOURCE
20
24
No.
K5
FUNCTION
Key
SOURCE MODE 2 (INPUT2)
K4
* AMP MODE
7C-B1
–
–
–
–
–
–
* AMP MODE
–
–
–
–
–
–
7F01-2D
7F01-2DD3
* keep on SOURCE MODE
7F01-0D
7F01-0DF3
* keep on SOURCE MODE
7C-CF
7F01-2F
7F01-2FD1
* keep on SOURCE MODE
7F01-0F
7F01-0FF1
* keep on SOURCE MODE
79-60
K59
(STOP)
7C-85
–
–
–
–
–
7A-09
–
–
–
–
–
–
7F01-3D
7F01-3DC3
7F01-1D
7F01-1DE3
–
–
K60
(PAUSE)
7C-83
–
–
–
–
–
7A-09
–
–
–
–
–
–
7F01-3A
7F01-3AC4
7F01-1A
7F01-1AE4
–
–
K61
(PLAY)
–
7C-82
–
–
–
–
–
7A-08
–
–
–
–
–
–
7F01-3E
7F01-3EC0
7F01-1E
7F01-1EE0
–
K62
(REW)
7C-86
–
–
–
–
–
7A-0D
–
–
–
–
–
–
7F01-37
7F01-37C9
7F01-17
7F01-17E9
–
–
K63
(FF)
7C-87
–
–
–
–
–
7A-0C
–
–
–
–
–
–
7F01-38
7F01-38C6
7F01-18
7F01-18E6
7A-A5
7A-A55B
K64
(SKIP -)
7C-B9
–
–
–
–
–
7A-0B
–
–
–
–
–
–
7F01-3B
7F01-3BC5
7F01-1B
7F01-1BE5
7A-A6
7A-A658
K65
(SKIP +)
7C-BA
–
–
–
–
–
7A-0A
–
–
–
–
–
–
7F01-3C
7F01-3CC2
7F01-1C
7F01-1CE2
7A-A7
7A-A759
K66
1
7C-94
–
–
–
–
–
79-11
–
–
–
–
–
–
7F01-21
7F01-21DF
7F01-01
7F01-01FF
7A-E5
7A-E51B
7A-E618
K67
2
7C-95
–
–
–
–
–
79-12
–
–
–
–
–
–
7F01-22
7F01-22DC
7F01-02
7F01-02FC
7A-E6
58
59
60
61
K68
3
7C-96
–
–
–
–
–
79-13
–
–
–
–
–
–
7F01-23
7F01-23DD
7F01-03
7F01-03FD
7A-E7
7A-E719
62
63
64
65
K69
4
7C-97
–
–
–
–
–
79-14
–
–
–
–
–
–
7F01-24
7F01-24DA
7F01-04
7F01-04FA
7A-E8
7A-E816
66
67
68
69
K70
5
7C-98
–
–
–
–
–
79-15
–
–
–
–
–
–
7F01-25
7F01-25DB
7F01-05
7F01-05FB
7A-E9
7A-E917
K71
6
7C-99
–
–
–
–
–
79-16
–
–
–
–
–
–
7F01-26
7F01-26D8
7F01-06
7F01-06F8
7A-EA
7A-EA14
K72
7
7C-9A
–
–
–
–
–
79-17
–
–
–
–
–
–
7F01-27
7F01-27D9
7F01-07
7F01-07F9
7A-EB
7A-EB15
K73
8
7C-9B
–
–
–
–
–
79-18
–
–
–
–
–
–
7F01-28
7F01-28D6
7F01-08
7F01-08F6
7A-EC
7A-EC12
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
TV
K74
9
7C-9C
–
–
–
–
–
79-19
–
–
–
–
–
–
7F01-29
7F01-29D7
7F01-09
7F01-09F7
7A-B1
7A-B14F
K75
0
7C-93
–
–
–
–
–
79-10
–
–
–
–
–
–
7F01-2A
7F01-2AD4
7F01-0A
7F01-0AF4
7A-B2
7A-B24C
K76
+10
7C-9D
–
–
–
–
–
79-1A
–
–
–
–
–
–
7F01-2B
7F01-2BD5
7F01-0B
7F01-0BF5
–
–
K77
ENT
7C-9E
–
–
–
–
–
79-0B
–
–
–
–
–
–
7F01-2C
7F01-2CD2
7F01-0C
7F01-0CF2
7A-B3
7A-B34D
K78
TV INPUT
K79
TV VOL (+)
K80
TV CH (+)
K81
TV
K82
TV MUTE
K83
TV VOL (-)
K84
TV CH (-)
* TV MODE
* TV MODE
99
RX-V371/HTR-3064
KEY NO. LAYOUT
KEY CODE
RAV433
RAV433
CODE
D2
Key No.
2
3
K2
4
8
5
9
12
6
10
14
16
25
26
11
7A-4739
K5
HDMI-2
7A-4A35
7A-4A34
15
K6
HDMI-3
7A-4D32
7A-4D33
19
K7
HDMI-4
7A-502F
7A-502E
K8
AV-1
7A-532C
7A-532D
7A-5628
27
33
34
35
38
48
49
51
52
46
43
47
50
54
57
62
K9
AV-2
7A-5629
K10
AV-3
7A-5926
7A-5927
K11
AV-4
7A-5C23
7A-5C22
K12
AV-5
7A-5F20
7A-5F21
K14
AUDIO-1
7A-651A
7A-651B
K15
AUDIO-2
7A-6817
7A-6816
K16
V-AUX
7A-55
7A-55AB
7F01-4AB4
K19
DOCK
7F01-4A
K20
TUNER
7A-16
7A-16E8
K24
FM
7F01-5827
7F01-5826
K25
AM
7F01-552A
7F01-552B
K26
PRESET
7F01-5B24
7F01-5B25
K27
TUNING
7F01-611E
7F01-611F
K28
INFO
K29
7A-2758
7A-2759
MEMORY
7F01-6718
7F01-6719
59
60
61
K30
PRESET
7F01-5E21
7F01-5E20
63
64
65
K31
TUNING
7F01-641B
7F01-641A
K32
MOVIE
7A-88
7A-8876
K33
MUSIC
7A-89
7A-8977
K34
ENHANCER/STEREO
7A-94
7A-946A
K35
SUR. DECODE
7A-8D
7A-8D73
K38
STRAIGHT
7A-56
7A-56A8
K40
BD/DVD (SCENE)
7A-007F
7A-007E
K41
TV (SCENE)
7A-037C
7A-037D
K42
CD (SCENE)
7A-0679
7A-0678
K43
RADIO (SCENE)
7A-0976
7A-0977
K44
SETUP
7A-84
7A-847A
7A-9D
7A-9D63
K45
(UP)
K46
OPTION
K47
VOLUME (+)
K48
K49
K50
K51
(LEFT)
ENTER
(RIGHT)
RETURN
7A-6B14
7A-6B15
7A-1A
7A-1AE4
7A-9F
7A-9F61
7A-DE
7A-DE20
7A-9E
7A-9E60
7A-AA
7A-AA54
K52
(DOWN)
7A-9C
7A-9C62
K54
VOLUME (-)
7A-1B
7A-1BE5
K57
MUTE
7A-1C
7A-1CE2
K59
(STOP)
7F01-1D
7F01-1DE3
K60
(PAUSE)
7F01-1A
7F01-1AE4
K61
(PLAY)
7F01-1E
7F01-1EE0
7F01-17E9
K62
(REW)
7F01-17
K63
(FF)
7F01-18
7F01-18E6
K64
(SKIP -)
7F01-1B
7F01-1BE5
K65
(SKIP +)
7F01-1C
7F01-1CE2
ID setting
ZONE setting
100
7E-2AD4
7A-4738
32
45
7E-2A
RECEIVER
31
44
7A-30CE
HDMI-1
30
42
MAIN
7A-30
K3
29
41
ID2 (5020)
MAIN
K4
28
40
SLEEP
ID1 (5019)
7
20
24
FUNCTION
K48 [(LEFT)] + K40 [SCENE BD/DVD] K48 [(LEFT)] + K41 [SCENE TV]
= ID1
= ID2
K50 + K40
K50 + K40
= MAIN
= MAIN
RX-V371/HTR-3064
■ ADVANCED SETUP
U, C models
101
RX-V371/HTR-3064
R, T, K, A, B, G, F, L, S models
(R, T, K, A, L, S models)
102
(B, G, F models)
RX-V371/HTR-3064
MEMO
RX-V371/HTR-3064
103
RX-V371/HTR-3064