Muhammad Arslan Javid
Phone: +92-336-7651221 | +92-334-4607099
Email: arslan.mech09@yahoo.com
Senior Project Engineer Mechancial
PEC No. MECH/46435
PROFESSIONAL SUMMARY
08 years of working Experience as Senior Project Engineer(Mechanical), Site Incharge Mechanical, Costing Engineer and Proposal
Engineer in various business sectors including Oil & Gas, Power, Fertilizer, Cement, Steel, Chemical, Plant Maintenance and advanced
MEP Building Projects at various locations in Pakistan.
Self-Motivated professional trained to obtain a dynamic & challenging position in the area of construction, maintenance, planning,
inspection, costing, supply chain, quality control and management to enhance my technical & professional skills whilst adding value to
organization by analyzing processes and methods being practiced.
EXPERTISE AND SKILLS
Construction Management
Project Management
Computer Skills
Upfront Construction Strategies
Project Activities Planning
Micro Soft Office
Construction & Commissioning
Skilled manpower management Resource
AUTOCAD
Budget / Cost Control
Tender and Bid Management
P6 Professional
Construction Progress Monitoring
Health & Safety Regulations
Adobe Illustrator
EMPLOYMENT CHRONICLE
Site Manager (Mechanical) - ETIMAAD ENGINEERING PRIVATE LIMITED - LAHORE, PAKISTAN | April 14 – Present
At present, I am working in Plant Construction Division of EEL as a Site Manager Mechanical. My key role includes the Monitoring of
changes in forecast resource requirements for their potential impact on the project schedule. Development of plot plans, piping layouts,
piping details, rigging plans, construction sequence and sub-contracting management. Preparation of BOQ for procurement/bidding.
Project Planning (scheduling, resource planning, and mobilization plan). Work Preparation (BOM, Method statement and resource
arrangements). Project Monitoring & Control (coordination, progress reporting, invoicing final settlement). Cost Control (project
budget, cost analytical reports, cash flow analysis). Sub-Contracting (pre- qualification, ITB preparation, and rate finalization).
PROJECTS (ETIMAAD ENGINEERING PRIVATE LIMITED)
Nimir Industrial Chemical Bikkhi- Punjab, Pakistan (Installation of 20 MW Coal Fired Power Plant) | March 21 till to date
Working as Site Manager Mechanical for Mechanical works which includes.
●
●
●
●
Consult with Clients, Contractors, and Vendors to discuss work progress and relevant issues and resolve them at site to achieve the targets.
Conduct scope alignment meeting with Clients, Contractors, Vendors and resolve issues, if any.
Attend Negotiation meeting with Client and Contractors.
Monitor all site activities. Which includes boiler erection, turbine, generator, economizer, super heater, ESP, pumps, cooling tower, HP and
LP piping and all other equipment installation.
OGDCL NASHPA (Gas Compression Facility Project) – KPK, Pakistan | April 20 – Jan 21
During OGDCL compression facility project I worked as Site Manager Mechanical for installation of 4 Natural Gas Engine driven Centrifugal
Compressor along with auxiliary equipment, piping, firefighting equipment installation, structural work, Tie-Ins and pre-commissioning
activities. My key responsibilities are as follows.





Prepare schedule, pre-planning and resource forecasting for engineering and other technical activities related to the project.
Inter-discipline coordination and overall quality control of the work.
Work in close coordination with vendors and Subcontractors and ensure timely procurement of materials complying with Specification and
Standards and execution of site activities.
Prepare Method Statement for Various Mechanical works.
Punch listing, Pre-Commissioning, Commissioning and start-up of (gas compressor, air instrument compressor, piping, structure).
Engro Polymer and Chemical Ltd (E-Pond Piping on EPC basis, and Flaker Storage Civil Works) – Sindh, Pakistan | June 19 – Feb 20
I worked as Site Manager Mechanical. My key responsibilities are as follows.




Monitor all site activity to ensure the work would be done in safe manner to meet the safety standards of Engro Polymer and Chemical
Limited.
Propose value engineering and cost effective solutions to meet Client requirements in safety and execution works.
Complete drawing study of job when a job will start, understanding its views and its requirements. Also preparing essential documents in
the light of code/ customer’s requirements.
Looking into various techniques, equipment and tools to enhance the productivity of various construction works.
Sapphire Finishing Mills Sunder Industrial Estate (5.5 MW Coal Fired Power Plant) – Punjab, Pakistan | March 18- January 19
Worked as Senior Project Engineer for Mechanical works for installation of 5.5 MW coal fired boiler and turbine which includes.
●
●
●
●
Consult with Clients, Contractors, and Vendors to discuss work progress and relevant issues and resolve them at site to achieve the targets.
Conduct scope alignment meeting with Clients, Contractors, Vendors and resolve issues, if any.
Prepare estimate and obtain approval from Client for all factors used in Estimation.
Monitor all site activities. Which includes boiler erection, turbine, generator, economizer, super heater, ESP, pumps, cooling tower, HP and
LP piping and all other equipment installation.
Aiwan-E-Quaid-E-Azam (AQA) – Punjab, Pakistan | March 17- March 18
Worked as Senior Project Engineer for Mechanical works, advanced MEP works which includes.
●
●
●
●
●
●
Review of Project specification, Scope of Work and Engineering drawings.
Monitoring and appraising construction work for conformance with engineering drawings.
Design Specifications, Owner’s standards, Contract Coordination Procedures and applicable codes.
Supervision in HVAC, plumbing, suspension ceilings, firefighting works. .
Interface with sub-contractors to ensure compliance of project implementation with construction schedule.
Coordinate with other departments to implement smooth handing over of projects without delay.
●
Solve site problems to avoid completion delay.
Fuji Meat Limited (3 Day World Class Animal Holding Facility at Fuji Meat Limited) – Sindh, Pakistan | April 16- Feb 17
Worked as Site In charge Mechanical Works with Fuji Meat Limited. Purpose of this project to established Shed for animals in the facility and all
related MEP work to run the facility. My duties and responsibilities as mentioned below
●
●
●
●
Estimate mechanical works including rate analysis and breakdowns.
Check discrepancies amongst drawings, specifications and BOQ and submit queries.
Conduct meeting with Subcontractors and vendors to discuss about the execution progress and timeline.
Propose value engineering and cost effective solutions to meet Client requirements.
●
Supervision for site construction activities.
Chashma Nuclear Power Generating Station (RFO-2015) – Punjab, Pakistan | November 15- March 16
Worked as a Site Engineer and coordinating with the Client. Supervision of different kind of jobs i.e. Heat exchanger cleaning and hydro testing,
Calibration of control valves, Inspection of filters. Resources arrangements. Inspection and repair of condenser, deaerators and rotary gates.
Inspection of gear boxes.
Fuji Fertilizer Company Ltd (Construction of Cooling Tower Cell) – Sadiqabad, Punjab | July 15- November 15
Worked as Project Engineer for Mechanical works which includes.
●
●
●
●
Review of materials delivered to site and its compliance with material approved, specification requirement and standards.
Monitor site activities and to ensure quality of work, safety and co-ordination between different disciplines.
Perform inspections of all mechanical work in progress on a continual basis and complete final checkout of steel canal installation to
ensure quality and conformance to specifications and codes prior to turnover to client for startup.
Liaison with client for effective implementation of project activities to the highest standard.
Fuji Fertilizer Company Ltd. (Primary Reformer Catalyst Tube Replacement Job) – Punjab, Pakistan | May 15- July 15
Worked as Junior Project Engineer for Mechanical works which includes.
●
●
●
●
Review of Project specification, Scope of Work and erection of catalyst tube replacement drawings.
Monitoring and appraising construction work for conformance with engineering drawings.
Supervision in the installation of scaffolding, dismantling of furnace roof, cutting and shifting of old catalyst tube, installation of new tubes,
welding of catalyst tubes, DPT, RT, UT of welding joints, loading and box of furnace.
Coordinate with other departments to implement smooth handing over of projects without delay.
Fatima Fertilizer Company Ltd. (Annual Turnaround 2014-15) – Punjab, Pakistan | March 14 - April 14
Served Fatima Fertilizer Limited Annual Turnaround (Pre and Post) for 2 months. During my service I have consistently demonstrated my abilities
to perform any assigned task with little or no supervision and provided oversight and technical support on mechanical maintenance activities for
Furnace Burners removing, nozzle replacement, tip adjustment and burner block removing technique, replacement of catalyst tubes with pig tail
of primary reformer during turn around, Heat Exchanger Cleaning and Hydro testing, Dismantling and reinstallation of Heat Exchanger
modification of MS and SS piping, Inspection of Heat Exchanger Bundle, Valve Cleaning, Removal of Cooling Tower Louvers with 500 ton Hydraulic
Crane, Cooling Tower Fills replacement, Gear Box Inspection of Cooling Tower, Daily monitoring of planned activities and there scheduled
arrangement. These Activities also included equipment selection, replacement, testing, operation monitoring and modification if required.
ACADEMIC HISTORY
BACHELOR OF MECHANICAL ENGINEERING – University of Engineering and Technology, Lahore-Pakistan| 2009-13
PERSONAL INFO
DATE OF BIRTH
|
1 April, 88
NATIONALITY
|
Pakistani
PERMANENT ADDRESS
|
Sahiwal, Pakistan
LANGUAGES
|
English, Urdu
AVAILABILITY
|
Immediately