COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
The American Society of
Mechanical Enlineen
A N
A M E R I C A N
N A T I O N A L
S T A N D A R D
WELDED AND SEAMLESS
WROUGHT STEEL PIPE
ASME B36.1OM-2000
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
Date of Issuance: March 15, 2001
This Standard will be revised when the Society approves the
issuance of
a new edition. There will be no addenda or written interpretations of the
requirements of this Standard issued to this edition.
ASME is the registered trademark of the American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited
as meeting thecriteria for
American National Standards. The Consensus Committee that approved the code or standard
was balanced to assure that individuals from competent andconcerned interests have had an
opportunity toparticipate. The proposed code or standard was made available for public review
and comment that provides an opportunity for additional public input from
industry, academia,
regulatory agencies, and the public-at-large.
ASME does not "approve," "rate,"
or "endorse" any item, construction, proprietary device,
or activity.
ASME does not take any position with respect to the validity of any patent rights
asserted in
connection with any items mentioned
in this document, and does not undertake to insure anyone
utilizing a standard againstliability for infringement of any
applicable letters patent, nor assume
any such liability. Users of a code or standard are expressly advised that the determination of
the validity of any
such patent rights, andthe risk of infringement of such rights, is entirely their
own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to
be interpreted as government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in
accordance with the established ASME procedures and policies, which precludes the issuance
of interpretations by individuals.
No part of this document may bereproduced in any form,
in an electronic retrieval system or otherwise,
without the prior written permissionof the publisher.
The Am.erican Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016-5990
Copyright O 2001 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All Rights Reserved
Printed in U.S.A.
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
S T D - A S M E B 3 b - L O M - E N G L 2000 m 0757b70 Ob21734 785 M
In March 1927, theAmerican Standards Association authorized the organization of a
Sectional Committee on Standardization of Dimensions and Material of Wrought Steel and
Wrought Iron Pipe and Tubing for the purpose of unifying the standards of these commodities
in force in this country. The American Society for Testing and Materials and The American
Society of Mechanical Engineers were designated as sponsors, and the first meeting of the
Sectional Committee washeld in Pittsburgh, Pennsylvania, onMay 18, 1928.
The dimensions of commercialpipe in generaluse in theUnited States at thetime
conformed rather generallytothoserecommended
by the ASME Committee onStandard
PipeandPipe Threads published in 1886 (ASME Transactions, Vol.VIII,p. 29). On these
standards an enormous industryhas beenbuiltandthe
satisfactory useof thisproduct
provesthe soundness ofthe original designand specification.
Increasingly severe service demands at thetimeofthe
Committee’s organization had
beenmetby using the nearest available pipe or tubing for heavier sections such as casing,
mechanicaltubing, etc., with resultinguneconomicalmultiplicity ofwallthicknesses.
Subsequently, the Committee, withthecooperation
of the industry, made a survey of
existing practice as the logical starting point for the development of an American Standard.
Fromthis survey, a table was designed to provide a selectionofwall thicknesses ofpipe
to cover the power piping requirements of industry where strength to resist internal pressure
governsselection andwas later expandedtoincludepipe
diameters and thicknesses used
in other industries.
The original intent of the Committee was to establish a system of Schedule Numbers
forpipesize/wallthicknesscombinationswhichwouldhaveanapproximatelyuniform
loo0 timesthe
P/S expression contained in themodifiedBarlow
relationship equalto
formula for pipewallthickness as defined in theAppendixtothis
standard. The resulting
Numbersdeparted so far from existing wall thicknesses in commonusethattheoriginal
intent could not beaccomplished. The Schedule Numberswerethen adopted strictly as a
convenient designationsystemfor use in ordering.
Inall cases, the designer mustbasehisselection
on the rules and allowable stresses set
by the code which governs his particular construction. The table is dimensionally complete
for all sizes andwallthicknesseswithinits
scope, but some ofthe larger, heavier wall
sections arebeyond the capability of seamlessmillproductionandmustbeobtainedfrom
or othersources.
forged andboredbillets
The firstissueofthis
standard was givenwiththe
designation AmericanStandard
“tentative” by theAmerican Standards Association in November 1935. Subsequent slight
the
revisionsto Table 1 andthe footnotes of thedimensional tables wereapprovedand
ASA changedthedesignation toAmerican Standard; the date ofASA approval wasApril
28, 1939.
Further revisions weremade by theSectional Committee. The list of specifications in
Table 1 was revisedwherenecessary
and slightrevisions in wall thicknesses of some of
P/S valueswereout
of line.
thelarge sizes of theheavyschedulesweremadewhere
It wasthehope in 1939 thatthedesignation of pipeused commercially by all industry
as Standard weight, Extra-Strong, and Double Extra-Strong would
gradually be replaced by
Schedule Numberdesignation.However,owingto
customs of over 50 years’ standing,
...
111
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
demand and production of pipe to these traditional dimensionsis undiminished. Consequently,
in responseto a demandfromusers,acceptedpractice
for dimensionsandweightsof
commercialwroughtsteelandweldedwroughtironpipewereadded.Thesechangeswere
designated an AmericanStandardonFebruary23,1950.
SubcommitteeNo. 1 was reorganized in 1957. In additiontonecessaryeditorialchanges,
a simplifiedformat was selected for thetables of weightsand dimensions so astoinclude
andidentifythe sizes andweights ofAPI Standards 5L and 5LX. These changestothe
standard were approved and it was designated an American Standard on December 21, 1959.
The standardwasrevised in 1969. A uniformmethodto calculate theplainendweight
in the tabulatedweights of
ofsteel pipe wasincluded,andminoradjustmentsweremade
steelpipeinTable
2 toconformtothis
newmethod.Additional sizes andthicknesses of
use were also addedto Table 2. InasmuchasAPI
steelpipethathadcomeintocommon
Standard 5L nolongerincludedwroughtironpipe,referencetothisAPIStandardwas
deletedfrom Table 3. These changesto the standardwereapprovedanditwasdesignated
3, 1970.
an AmericanNationalStandardonFebruary
Furtherrevisionsweremadetothestandard
in 1975.Additional sizes andthicknesses
ofsteelpipethathadbeenaddedtoAPIspecificationswereaddedto
Table 2. Table3,
DimensionsandWeightsofWeldedWroughtIronPipe,
was deleted in its entirety, since
wroughtironpipeisnolongerproduced.Thesechanges
in thestandardwereapproved
5 , 1975.
anditwasdesignated
an AmericanNationalStandardonJune
The standardwasrevised in 1978toinclude SI metric dimensions. The outside diameter
by
andwallthicknesseswereconvertedtomillimeters
by multiplyingtheinchdimensions
25.4.Outsidediameterslargerthan
16 in. wereroundedtothenearestmillimeter,and
0.1 mm.Wallthicknesses
outside diameters 16 in. andsmallerwereroundedtothenearest
wereroundedtothenearest0.01mm.Theseconvertedandrounded
SI metricdimensions
wereaddedtoTable2.
A formulatocalculatethe
SI metricplainendmass,
in kilograms
per meter, using SI metric diameters and thicknesses was added to section
5. The SI metric
plain end masswascalculatedand
wasaddedto
Table 2. These changes in thestandard
wereapprovedanditwasdesignatedanAmericanNationalStandardonJuly18,1979.
in 1984. The ANSIdesignations,whicharenolonger
in
Furtherrevisionsweremade
use,weredeletedfrom
Table 1, andthelist
of specificationswasrevisedto
agree with
currentASTMandAPIspecifications.Additionalsizesandthicknesseswhichhadbeen
addedtoAPIspecificationswereaddedto
Table 2. Thateditionwasapproved
as an
AmericanNationalStandardonAugust19,1985.
The next edition included additional wall thicknesses and
was approved by the American
NationalStandardsInstitute onAugust24,1995.
The 1996 edition contained revisions to Table
2, adding pipe sizes, changing some plain
endweightsandmasses,identifyingmetricpipe
by the dimensionless designator DN,and
eliminatingtheAPISpecificationcolumn.The
1996 editionwasapprovedas
an American
23, 1996.
NationalStandardonSeptember
The current edition contains revisions to
Table 2 toincludethereviseddensityforsteel
incorporatedintoSection 5 previously. Table 1 was deleted and other editorial changesto
Sections 1, 2, 3, 5, 8, and 9 were made. This edition was approved as an American National
I, 2000.
StandardonDecember
iv
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
ASME STANDARDS COMMITTEE B32
Metal and Metal Alloy
Wrought Mill Product Nominal Sizes
(The following is the roster
of the Committea at the time of approval of this Standard.)
OFFICERS
J. A. Gruber, Ph.D., Chair
S. D. Weinman, Secretary
COMMITTEE PERSONNEL
F. M. Christensen, F. M. Christensen Metallurgical Consultant, Inc.
A. Cohen, Arthur Cohen & Associates
J. A. Gruber, Ph.D., Wheatland Tube Co.
W.N. Hotliday, L W Steel Co.
L. T. Ingels, American Gas Association, Inc.
K. O. Kverneland, Kok Metric Co.
A. R. Machell, Jr.
P. Pollak, Aluminum Association, Inc.
S. D. Weinman, The American Society of Mechanical Engineers
V
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
CONTENTS
Foreword .................................................................................
Standards
Committee
Roster
................................................................
iii
v
scope ................................................................................
Size ..................................................................................
1
Materials .............................................................................
Wall Thickness .......................................................................
Weights ..............................................................................
Permissible
Variations
.................................................................
Pipe Threads ..........................................................................
Wall Thickness
Designations
...........................................................
Wall Thickness
Selection
..............................................................
1
1
1
1
1
1
2
2
Table
1
Dimensions and Weights of Welded and Seamless Wrought Steel
Pipe
vii
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
...................
3
WELDED AND SEAMLESS WROUGHT STEEL PIPE
in poundsper foot,
Thenominalplainendweight,
is calculated usingthefollowingformula:
1 SCOPE
ThisStandardcoversthe
standardization of dimensions ofweldedandseamlesswroughtsteelpipe
for
high or lowtemperaturesand pressures.
Theword pipe isused as distinguished from rube
toapplyto tubular products of dimensions commonly
used for pipeline andpiping systems. PipeNPS12
(DN 300) andsmallerhave outside diametersnumerically larger than their corresponding sizes. In contrast,
the outside diameters of tubes are numerically identical
tothe size number for all sizes.
W $ = 10.69(0- t)t
where
= nominalplainendweightroundedtothe
nearest 0.01 lb/ft
D = outside diameter to the nearest 0.001 in. (the
for ODonly in
symbol D is to beused
mathematicalequations or formulas)
t = specified wall thickness rounded to thenearest 0.001 in.
The nominal plain end mass, in kilograms per meter,
is calculated using the following formula:
Wpe
2 SIZE
The size ofallpipeisidentifiedbythenominal
pipe size.
The
manufacture of pipe
NPS
(DN
6) to
NPS
12 (DN 300) inclusive is
basedon
a standardized
outside diameter (OD). This OD was originally selected
so thatpipewith
a standardODandhaving
a wall
thicknessthatwastypicalof
the periodwouldhave
an insidediameter (ID) approximatelyequal to the
nominal size. Although there is no such relation between
the existing standard thickness - ODandnominal
size - these nominal sizes and standard ODs continue
in use as "standard."
350) and
Themanufacture ofpipeNPS14(DN
largerproceedsonthebasis
ofanODcorresponding
tothenominal
size.
Wpr = 0.0246615(0 - t ) t
where
Wpe = nominalplainendweightroundedto
the
nearest 0.01 kg/ m
D = outside diametertothe nearest 0.1mm for
outside diameters that are 16 in. (406.4 mm)
andsmallerand to the nearest 1.0 mm for
outside diameters larger than16 in. (406.4
mm) (the symbol D istobeused
for OD
only in mathematical equations or formulas)
t = specified wall thickness roundedtothenearest 0.01 mm
6 PERMISSIBLE VARIATIONS
3 MATERIALS
in dimensions differ depending upon
the
methodofmanufactureemployed
in making the pipe
to the various specifications available. Permissible variations for dimensions are indicated in each specification.
The
dimensional
standards for pipe
described
here
Variations
are for productscovered in ASTM specifications.
4 WALLTHICKNESS
Thenominalwall
7 PIPE T I - " X
thicknesses are given in Table1.
Unlessotherwise specified, thethreadsofthreaded
pipe shall conform to ANSI/ASME B 1.20.1, Pipe
Threads,GeneralPurpose
(Inch).
permit
Schedules 5 and 10 wall thicknesses do not
threading in accordance
with
ANSVASME
B1.20.1.
5 WEIGHTS
The
nominal
weights
of steel
pipe
values
and
are tabulated in Table 1.
are calculated
1
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
S T D - A S M E B3b.LO"ENGL
2000
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.1OM-2000
8 WALLTHICKNESSDESIGNATIONS
The
wall
thickness designations Standard, ExtraStrong, andDoubleExtra-Stronghavebeencommercially used designations for many years. As explained in
the Foreword, the Schedule Numbers were subsequently
added as a convenient designation for useinordering
pipe. Standard and Schedule 40 are identical for upto
NPS 10 (DN 250) inclusive. All larger sizes of Standard
in. (9.53 mm)
wall
thicknesses. Extra-Strong
have
8 (DN
andSchedule 80 are identical for uptoNPS
200) inclusive. All larger sizes of Extra-Stronghave
'/2 in. (12.70 mm)wall
thicknesses.
Pipe of sizes andwall thicknesses other thanthose
of Standard, Extra-Strong, andDouble Extra-Strong,
and Schedule Number were adopted from API Specifi-
2
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
0757b70 Ob21737 2b7 W
cation 5L. It wasnotconsideredpractical
to establish
ScheduleNumbers or new designations for them.
9 WALLTHICKNESSSELECTION
When the selection of wall thickness depends primarily upon capacity to resist internal pressure under given
conditions, thedesignershallcomputethe
exact value
ofwall thickness suitable for conditions for which the
pipeis required, asprescribed in detail in the ASME
BoilerandPressureVesselCode,
ASME B31 Code
for Pressure Piping, or other similar codes, whichever
governs the construction. A thickness shallbe selected
fromTable 1 to suit the valuecomputed to fulfill the
conditions for which the pipe is desired.
WELDED AND
WROUGHT
SEAMLESS
PIPE
STEEL
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE
Customary Units
Extra-Strong
End Plain Wall
Outside
NPS Diameter, Thickness,Weight,
in.
lblft
[Note (I)]in.
Identification
[Standard ISTD),
[XS),
or Double Extra
Strong (XXS)]
...
...
0.405
0.405
0.405
0.405
0.049
0.057
0.068
0.095
0.1 9
0.21
0.24
0.31
0.540
0.540
0.540
0.540
0.065
0.073
0.088
0.1 19
0.33
0.36
0.43
0.54
0.675
0.675
0.675
0.675
0.065
0.073
0.091
0.1 26
0.42
0.47
0.57
0.74
0.840
0.840
0.840
0.840
0.065
0.083
0.095
0.109
0.54
0.67
0.76
0.85
0.840
0.840
0.840
0.147
0.1 88
0.294
1 .o9
1.31
1.72
1.O50
1.O50
1.O50
1.O50
0.065
0.083
0.095
0.1 13
0.69
0.86
0.97
1.13
1.O50
1.O50
1.O50
0.1 54
0.219
0.308
1.48
1.95
2.44
1.315
1.315
1.31 5
1.315
0.065
0.109
0.114
0.133
0.87
1.41
1.46
1.68
STD
1.315
1.31 5
1.31 5
0.179
0.250
0.358
2.17
2.85
3.66
1.660
1.660
1.660
1.660
0.065
0.109
0.117
0.140
1.11
1.81
1.93
2.27
1.660
1.660
1.660
0.191
0.250
0.382
3.00
3.77
5.22
10
30
40
80
STD
xs
...
...
10
30
40
80
STD
xs
...
...
...
...
...
...
...
...
...
...
Mass,
kglm
10.3
10.3
10.3
10.3
1.24
1.45
1.73
2.41
0.28
0.32
0.37
0.47
13.7
13.7
13.7
13.7
1.65
1.85
2.24
3.02
0.49
0.54
0.63
0.80
10
30
40
80
10
10
10
10
17.1
17.1
17.1
17.1
1.65
1.85
2.31
3.20
0.63
0.70
0.84
1.10
5
10
30
40
15
15
15
15
21.3
21.3
21.3
21.3
1.65
2.1 1
2.41
2.77
0.80
1.o0
1.12
1.27
80
160
...
15
15
15
21.3
21.3
21.3
3.73
4.78
7.47
1.62
1.95
2.55
5
10
30
40
20
20
20
20
26.7
26.7
26.7
26.7
1.65
2.1 1
2.41
2.87
1.O3
1.28
1.44
1.69
80
160
...
20
20
20
26.7
26.7
26.7
3.91
5.56
7.82
2.20
2.90
3.64
5
10
30
40
25
25
25
25
33.4
33.4
33.4
33.4
1.65
2.77
2.90
3.38
1.29
2.09
2.18
2.50
xs
...
xxs
80
160
...
25
25
25
33.4
33.4
33.4
4.55
6.35
9.09
3.24
4.24
5.45
...
5
10
30
40
32
32
32
32
42.2
42.2
42.2
42.2
1.65
2.77
2.97
3.56
1.65
2.69
2.87
3.39
80
160
32
32
32
42.2
42.2
42.2
4.85
6.35
9.70
4.47
5.61
7.77
STD
xs
...
...
*..
STD
xs
...
xxs
...
...
...
STD
xs
...
xxs
...
...
...
...
...
STD
xs
...
xxs
...
3
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
SI Units
End Plain WallOutside
Schedule
DN
Diameter, Thickness,
mm
mm
No.
[Note
(211
WELDED
B36.10M-2000
ASME
AND
WROUGHT
SEAMLESS
PIPE
STEEL
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT’D)
Identification
[Standard (STD),
(XS),
Customary Units
Extra-Strong
End Plain WallOutside
Diameter,
NPS
Thickness,
Double
Weight,
Schedule
Extra
or
In.
in.
[Note 1111
1.goo
lbit
Strona 1XXS)I
...
1 .goo
1.900
1 .goo
0.065
0.109
0.125
0.145
1.28
2.09
2.37
2.72
1.goo
1 .goo
1 .goo
0.200
0.281
0.400
3.63
4.86
6.41
2.375
2.375
2.375
2.375
0.065
0.083
0.109
0.1 25
1.61
2.03
2.64
3.01
2.375
2.375
2.375
2.375
0.141
0.1 54
0.172
0.188
3.37
3.66
4.05
4.40
2.375
2.375
2.375
2.375
2.375
0.218
0.250
0.281
0.344
0.436
5.03
5.68
6.29
7.47
9.04
2.875
2.875
2.875
2.875
0.083
0.109
0.120
O. 125
2.48
3.22
3.53
3.67
2.875
2.875
2.875
2.875
O. 141
0.156
0.172
0.188
4.1 2
4.53
4.97
5.40
2.875
2.875
2.875
2.875
0.203
0.216
0.250
0.276
5.80
6.14
7.02
7.67
STD
2.875
2.875
0.375
0.552
10.02
13.71
...
xxs
3.500
3.500
3.500
3.500
0.083
0.1 o9
0.1 20
0.1 25
3.03
3.95
4.34
4.51
3.500
3.500
3.500
3.500
3.500
0.141
0.1 56
0.172
0.1 88
0.216
5.06
5.58
6.1 2
6.66
7.58
...
...
STD
xs
...
End Plain WallOutside
DN
Diameter,
Thickness,
Mass,
No.
[Note
kglm
(2)lmm mm
5
10
30
40
40
40
40
40
48.3
48.3
48.3
48.3
1.65
2.77
3.18
3.68
1.90
3.1 1
3.53
4.05
80
160
40
40
40
48.3
48.3
48.3
5.08
7.14
10.15
5.41
7.25
9.55
50
50
50
50
60.3
60.3
60.3
60.3
1.65
2.1 1
2.77
3.18
2.39
3.03
3.93
4.48
50
50
50
50
60.3
60.3
60.3
60.3
3.58
3.91
4.37
4.78
5.01
5.44
6.03
6.54
50
50
50
50
50
60.3
60.3
60.3
60.3
60.3
5.54
6.35
7.14
8.74
11.O7
7.48
8.45
9.36
11.1 1
13.44
65
65
65
65
73.0
73.0
73.0
73.0
2.1 1
2.77
3.05
3.18
3.69
4.80
5.26
5.48
65
65
65
65
73.0
73.0
73.0
73.0
3.58
3.96
4.37
4.78
6.1 3
6.74
7.40
8.04
65
65
65
65
73.0
73.0
73.0
73.0
5.16
5.49
6.35
7.01
8.63
9.14
10.44
11.41
160
65
65
73.0
73.0
9.53
14.02
14.92
20.39
5
80
80
80
88.9
88.9
88.9
88.9
2.11
2.77
3.05
3.18
4.52
5.88
6.46
6.72
88.9
88.9
88.9
88.9
88.9
3.58
3.96
4.37
4.78
5.49
7.53
8.30
9.1 1
9.92
11.29
...
xxs
...
...
...
...
10
30
5
...
...
...
STD
40
...
...
...
...
xs
80
...
...
...
160
...
...
xxs
...
...
5
...
...
...
...
...
...
...
...
10
...
...
...
...
30
40
...
...
...
...
xs
80
...
...
...
...
...
...
...
10
...
...
...
...
ao
...
80
80
80
...
...
30
40
STD
4
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
SI Units
ao
80
PIPE
WELDED
STEEL
AND
WROUGHT
SEAMLESS
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customary Units
Outside
Wall
End Plain
NPS Diameter, Thickness,Weight,
In.
lblft
[Note (1 II
in.
Identification
[Standard (STDL
Extra-Strong (XS),
or Double Extra
Strong [XXSll
SI Units
End Plain WallOutside
Schedule
DN
Diameter, Thickness,
mm
mm
No.
[Note (211
...
...
3.500
3.500
3.500
3.500
3.500
0.250
0.281
0.300
0.438
0.600
8.69
9.67
10.26
14.34
18.60
4.000
4.000
4.000
4.000
0.083
...
...
...
...
0.125
3.48
4.53
4.98
5.18
...
o.1 o9
o.120
4.000
4.000
4.000
4.000
0.141
0.156
0.172
O.188
5.82
6.41
7.04
7.66
...
...
...
...
4.000
4.000
4.000
4.000
0.226
0.250
0.281
0.318
9.12
10.02
11.17
12.52
STD
4.500
4.500
4.500
4.500
0.083
0.109
0.120
0.125
3.92
5.1 2
5.62
5.85
...
4.500
4.500
4.500
4.500
0.141
0.156
O.172
O.188
6.57
7.24
7.96
8.67
4.500
4.500
4.500
4.500
0.203
0.219
0.237
0.250
9.32
10.02
10.80
11.36
4.500
4.500
4.500
4.500
0.281
0.312
0.337
0.438
12.67
13.97
15.00
19.02
4.500
4.500
0.531
0.674
22.53
27.57
5.563
5.563
5.563
5.563
0.083
0.109
O.125
0.134
5.563
5.563
5.563
5.563
0.1 56
0.1 88
0.219
0.258
...
xs
...
...
80
160
...
xxs
5
10
...
...
...
...
30
40
...
...
...
...
xs
80
5
...
...
...
...
...
...
10
...
...
...
...
...
...
30
...
...
...
...
STD
40
...
...
...
...
xs
...
...
Mass,
kglm
80
80
80
80
80
88.9
88.9
88.9
88.9
88.9
6.35
7.14
7.62
11.13
15.24
12.93
14.40
15.27
21.35
27.68
90
90
90
90
101.6
101.6
101.6
101.6
2.1 1
2.77
3.05
3.18
5.18
6.75
7.41
7.72
90
90
90
90
101.6
101.6
101.6
101.6
3.58
3.96
4.37
4.78
8.65
9.54
10.48
11.41
90
90
90
90
101.6
101.6
101.6
101.6
5.74
6.35
7.14
8.08
13.57
14.92
16.63
18.64
1 O0
1 O0
1 O0
1 O0
114.3
114.3
1 14.3
1 14.3
2.1 1
2.77
3.05
3.18
5.84
7.62
8.37
8.71
1 O0
1 O0
1 O0
1 O0
1 14.3
1 14.3
114.3
114.3
3.58
3.96
4.37
4.78
9.78
10.78
11.85
12.91
1 O0
1 O0
1O0
1 O0
114.3
114.3
114.3
114.3
5.16
5.56
6.02
6.35
13.89
14.91
16.08
16.91
1 O0
1 O0
1 O0
1 O0
114.3
114.3
114.3
114.3
7.14
7.92
8.56
11.13
18.87
20.78
22.32
28.32
...
80
120
...
160
1 O0
1 O0
114.3
114.3
13.49
17.12
33.54
41 .O3
4.86
6.36
7.27
7.78
...
...
125
125
125
125
141.3
141.3
141.3
141.3
2.11
2.77
3.18
3.40
7.24
9.46
10.83
1 1.56
9.02
10.80
12.51
14.63
...
...
...
...
...
STD
40
125
125
125
125
141.3
141.3
141.3
141.3
3.96
4.78
5.56
6.55
13.41
16.09
18.61
21.77
xxs
...
...
5
*..
...
...
10
...
5
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
B36.10M-2000
ASME
WELDED AND
WROUGHT
SEAMLESS
PIPE
STEEL
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Identification
[Standard (STD),
(XS),
or Double Extra
Strong (XXSH
Customary Units
Outside
Extra-Strong
End
Plain
Wall
Diameter,
NPS
Thickness,Weight,
in.
lblft
[Note (111
in.
17.51
20.80
27.06
32.99
38.59
5
0.312
5
19.19
5 0.344
0.375
5
0.500
5
0.625
5
0.750
5
25.05
28.60
6.625
6.625
6.625
6.625
0.083
0.109
0.125
0.134
5.80
7.59
8.69
9.30
6
6
6
6
6.625
6.625
6.625
6.625
0.141
0.156
0.172
0.188
9.77
10.79
11.87
12.94
60.312
6
0.375
6
0.432
6
6
6
6
45.39
47.10
53.21
53.78
11.36
14.12
12.70
15.88
6
6
6
6
13.94
60.203
15.00
0.219
6
17.04
60.250
18.99 60.280
21
...
...
xs
40.28
49.12
5.563
5.563
5.563
0.719
6
0.750
6
0.864
6
0.875
6
6.625
6.625
6.625
6.625 28.26
6.625
6.625
6.625
6.625
6.625
6.625
6.625
9.92 8 0.109 8.625
25 8 0.1 8.625
8
8.625
56
8 0.1
8.625
8
8
8
8
24.72
0.277
8
27.73
0.312
8
28.58 80.322
,
8
8.625
8.625
8.625
8.625
8.625
8.625
8.625
8.625
1
67.57
0.188
0.203
0.219
0.250
...
5
...
150
150
150
168.3
168.3
168.3
168.3
2.1 1
2.77
3.1 8
3.40
8.65
11.31
12.95
13.83
...
...
..*
...
150
150
150
150
168.3
168.3
168.3
168.3
3.58
3.96
4.37
4.78
14.54
16.05
17.67
19.28
.168.3
..
168.3
...
.168.3
..
40
150
150
150
5.1 6
5.56
20.76
22.31
.168.3
..
168.3
...
37.31
...
42.56
80
150
150
150
9.53
150
10.97
168.3
168.3
168.3
12.70
14.27
15.88
48.73
54.21
59.69
2.77
3.18
3.76
3.96
14.78
16.93
19.97
21.01
4.78
5.16
5.56
6.35
25.26
27.22
29.28
33.32
150
...
...
...
...
.25.36
..
168.3
STD
...
xs
...
...
...
18.26
168.3. . .
70.12
...
79.22
xxs
80.08
...
...
...
...
13.41
150
19.05
21.95
22.23
150
160
168.3
...
168.3
...
168.3
...
150
150
150
...
200
...
200
200
200
200
219.1
219.1
219.1
219.1
10
...
...
20
7.04
7.92
200
8.74
6
200
200
168.3
168.3
219.1
219.1
219.1
219.1
...
...
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
...
5
200
150
120
...
...
...
36.82...
41.25
8.18
219.1
STD
45.34. . .
10
...
150
...
16.96
18.28
19.68
22:38
42.55
30.45
6.35
150
.31.33
..
7.92
34.39...
8.74
...
0.344
125
...
32.74
36.43
40.09
23.62
26.05
28.57
30.97
120
160
141.3
...
...
.O6
23.10
7.14
7.92
8.74
9.53
125
125
19.05
...
...
7.1
141.3
141.3
141.3
141.3
80
...
0.500
0.562
0.625
0.148
...
125
125
125
Mass,
kglm
125
...
0.344
6.625
6.625
6.625
6.625
141.3...
141.3. . .
57.43
xxs
Outside
End
Plain
Wall
Schedule
DN
Diameter, Thlickness,
mm
mm
No.
[Note (211
...
...
...
5.563
15.87 0.281
5.563
5.563
5.563
SI Units
219.1
30
219.1
...
40
219.1
...
200
200
200
WELDED AND
WROUGHT
SEAMLESS
PIPE
STEEL
ASME B36.1OM-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customary Units
Extra-Strong
End Plain WallOutside
NPS Diameter, Thickness,Weight,
[Note (111
in.
in.
lblft
Identification
[Standard (STD),
(XS),
or Double Extra
Strong (XXS)]
8.625
8.625
8.625
8.625
0.375
0.406
0.438
0.500
33.07
35.67
38.33
43.43
8
8
8
8
8.625
8.625
8.625
8.625
0.562
0.594
0.625
0.719
48.44
51.O0
53.45
60.77
...
8
8
8
8
8
8.625
8.625
8.625
8.625
8.625
0.750
0.812
0.875
0.906
1.o00
63.14
67.82
72.49
74.76
81.51
...
10
10
10
10
10.750
10.750
10.750
10.750
0.134
0.156
0.165
0.188
15.21
17.67
18.67
21.23
...
10
10
10
10
10.750
10.750
10.750
10.750
0.203
0.219
0.250
0.279
22.89
24.65
28.06
31.23
*..
10
10
10
10
10.750
10.750
10.750
10.750
0.307
0.344
0.365
0.438
34.27
38.27
40.52
48.28
...
10
10
10
10
10.750
10.750
10.750
10.750
0.500
0.562
0.594
0.625
10
10
10
10
10.750
10.750
10.750
10.750
10
10
10
10
12
12
12
12
Schedule
No.
[Note
...
...
...
8
8
8
8
SI Units
60
...
...
xs
80
...
...
...
1O0
...
...
120
...
...
xxs
...
140
...
160
...
...
5
...
...
...
...
10
...
...
...
...
...
...
20
...
30
...
...
STD
40
...
...
54.79
61.21
64.49
67.65
xs
...
...
...
...
0.719
0.812
0.844
0.875
77.10
86.26
89.38
92.37
...
1O0
10.750
10.750
10.750
10.750
0.938
1.o00
1.125
1.250
98.39
104.23
115.75
126.94
12.750
12.750
12.750
12.750
0.1 56
0.1 72
0.180
0.188
2 1 .o0
23.13
24.1 9
25.25
60
...
80
...
...
...
120
...
...
...
...
...
140
160
xxs
...
...
...
5
...
...
...
10
*..
...
7
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
Wall
End Plain
Outside
DN
Diameter, Thickness, Mass,
mm
mm
(211
kglm
200
200
200
200
219.1
219.1
219.1
219.1
9.53
10.31
11.13
12.70
49.25
53.09
57.08
64.64
200
200
200
200
219.1
219.1
219.1
219.1
14.27
15.09
15.88
18.26
72.08
75.92
79.59
90.44
200
200
200
200
200
219.1
219.1
219.1
219.1
219.1
19.05
20.62
22.23
23.01
25.40
93.98
100.93
107.93
111.27
121.33
250
250
250
250
273.0
273.0
273.0
273.0
3.40
3.96
4.19
4.78
22.61
26.27
27.78
31.62
250
250
250
250
273.0
273.0
273.0
273.0
5.16
5.56
6.35
7.09
34.08
36.67
41.76
46.49
250
250
250
250
273.0
273.0
273.0
273.0
7.80
8.74
9.27
11.13
51.01
56.96
60.29
71.88
250
250
250
250
273.0
273.0
273.0
273.0
12.70
14.27
15.09
15.88
81.53
91.O5
95.98
100.69
250
250
250
250
273.0
273.0
273.0
273.0
18.26
20.62
21-44
22.23
114.71
128.34
133.01
137.48
250
250
250
250
273.0
273.0
273.0
273.0
23.83
25.40
28.58
31.75
146.43
155.1O
172.27
188.90
300
300
300
300
323.8
323.8
323.8
323.8
3.96
4.37
4.57
4.78
31.24
34.43
35.98
37.61
S T D * A S M E B3b.LOM-ENGL
2000
m
0757b70 Ob21745
5b0
AND SEAMLESS
STEEL
WROUGHT
WELDED
636.10M-2000
ASME
PIPE
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customary Units
Wall
Plain
End
Outside
NPS
Diameter, Thickness,Weight,
[Note (111
in.
in.
lblft
Identification
[Standard (STD).
Extra-Strong (XS).
or Double Extra
Strong (XXS)I
Schedule
No.
[Note
...
...
12
12
12
12
12.750
12.750
12.750
12.750
0.203
0.219
0.250
0.281
27.23
29.34
33.41
37.46
12
12
12
12
12.750
12.750
12.750
12.750
0.312
0.330
0.344
0.375
41.48
43.81
45.62
49.61
12
12
12
12
12.750
12.750
12.750
12.750
0.406
0.438
0.500
0.562
53.57
57.65
65.48
73.22
12
12
12
12
12.750
12.750
12.750
12.750
0.625
0.688
0.750
0.812
81.O1
88.71
96.21
103.63
12
12
12
12
12.750
12.750
12.750
12.750
0.844
0.875
0.938
1.o00
107.42
111.08
118.44
125.61
12
12
12
12
12.750
12.750
12.750
12.750
1.O62
1.125
1.250
1.312
132.69
139.81
153.67
160.42
...
...
...
14
14
14
14
14.000
14.000
14.000
14.000
0.156
...
0.203
0.210
23.09
27.76
29.94
30.96
14
14
14
14
14.000
14.000
14.000
14.000
0.219
0.250
0.281
0.312
32.26
36.75
41.21
45.65
...
14
14
14
14
14.000
14.000
14.000
14.000
0.344
0.375
0.406
0.438
50.22
54.62
59.00
63.50
14
14
14
14
14.000
14.000
14.000
14.000
0.469
0.500
0.562
O. 594
67.84
72.16
80.73
85.13
14
14
14
14
14.000
14.000
14.000
14.000
0.625
0.688
0.750
0.812
89.36
97.91
106.23
114.48
O. 188
...
300
...
300
...
...
300
...
xs
300
...
300
30
...
300
...
...
...
...
xxs
350
120.59
132.05
143.17
154.17
355.6
355.6
355.6
355.6
3.96
4.78
5.16
5.33
34.34
41.36
44.59
46.04
355.6
355.6
355.6
355.6
5.56
6.35
7.14
7.92
48.00
54.69
61.36
67.91
355.6
355.6
355.6
355.6
8.74
9.53
10.31
11.13
74.76
81.33
87.79
94.55
350
350
350
350
355.6
355.6
355.6
355.6
11.91
12.70
14.27
15.09
100.95
107.40
120.12
126.72
350
350
355.6
355.6
355.6
355.6
15.88
17.48
19.05
20.62
133.04
145.76
158.11
170.34
300
5
...
...
...
350
350
350
...
350
10
350
20
350
30
...
350
40
...
...
...
...
...
...
...
60
...
350
15.88
17.48
19.05
20.62
197.43
208.08
228.68
238.69
xs
...
...
...
323.8
323.8
323.8
323.8
26.97
28.58
31.75
33.32
...
...
79.71
85.82
97.44
108.93
323.8
323.8
323.8
323.8
...
...
10.31
11.13
12.70
14.27
300
* , .
350
323.8
323.8
323.8
323.8
159.87
165.33
176.29
186.92
160
STD
61.70
65.19
67.91
73.86
21.44
22.23
23.83
25.40
300
350
7.92
8.38
8.74
9.53
323.8
323.8
323.8
323.8
...
...
323.8
323.8
323.8
323.8
300
300
300
140
...
40.55
43.64
49.71
55.76
1O0
...
300
350
5.16
5.56
6.35
7.14
300
300
...
...
323.8
323.8
323.8
323.8
...
...
120
...
300
80
300
350
300
300
60
...
...
300
300
40
...
...
300
300
20
...
300
Wall
Plain
End
Outside
DN
Diameter, Thickness, Mass,
mm kglm mm
(211
...
...
STD
8
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
SI Units
80
...
350
PIPE
WELDED
STEEL
AND
WROUGHT
SEAMLESS
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI
Customary Units
Outside
Wall
Plain
End
NPS Diameter, Thickness,Weight,
[Note ( l b 1 in. in.
Iblft
16.000
16.000
16.000
16.000
16.000
16.000
Identification
[Standard (STDI,
Extra-Strong (XS),
or Double Extra
Strong (XXS)]
14.000
14.000
14.000
14.000
0.875
0.938
1.000
1.062
122.77
130.98
138.97
146.88
14
14
14
14
14.000
14.000
14.000
14.000
1.094
1.125
1.250
1.406
150.93
154.84
170.37
189.29
14
14
14
14
14.000
14.000
14.000
14.000
2.000
2.125
2.200
2.500
256.56
269.76
277.51
307.34
...
16
16
16
16
16.000
27.93
31.78
34.28
36.95
...
...
16.000
0.1 65
O. 188
0.203
0.219
16
16
16
16
16.000
16.000
16.000
16.000
0.250
0.281
0.312
0.344
350
350
350
350
355.6
355.6
355.6
355.6
22.23
23.83
25.40
26.97
182.76
194.98
206.84
218.58
355.6
355.6
355.6
355.6
27.79
28.58
31.75
35.71
224.66
230.49
253.58
281.72
350
350
350
350
355.6
355.6
355.6
355.6
50.80
53.98
55.88
63.50
381.85
401.52
413.04
457.43
...
...
...
400
400
400
406.4
406.4
406.4
406.4
4.19
4.78
5.16
5.56
41.56
47.34
51.O6
54.96
42.09
47.22
52.32
57.57
...
...
...
...
10
400
400
400
400
406.4
406.4
406.4
406.4
6.35
7.14
7.92
8.74
62.65
70.30
77.83
85.71
62.64
67.68
72.86
77.87
STD
400
400
400
406.4
406.4
406.4
406.4
9.53
10.31
11.13
11.91
93.27
100.71
108.49
115.87
xs
406.4
406.4
406.4
406.4
12.70
14.27
15.88
16.66
123.31
138.00
152.94
160.13
400
400
400
406.4
406.4
406.4
406.4
17.48
19.05
20.62
21.44
167.66
181.98
196.18
203.54
400
400
400
400
406.4
406.4
406.4
406.4
22.23
23.83
25.40
26.19
210.61
224.83
238.66
245.57
400
400
400
406.4
406.4
406.4
406.4
26.97
28.58
30.18
30.96
252.37
266.30
280.01
286.66
400
406.4
406.4
406.4
31.75
36.53
40.49
293.35
333.21
365.38
16
16
16
16
16.000
0.375
0.406
0.438
0.469
16
16
16
16
16.000
16.000
16.000
16.000
0.500
0.562
0.625
0.656
82.85
92.75
102.72
107.60
16
16
16
16
16.000
16.000
16.000
0.688
0.750
0.812
0.844
112.62
122.27
131.84
136.74
16.000
Outside
Wall
Plain
End
Schedule
DN
Mass,
Diameter, Thickness,
mm kglm mm
No.
[Note (211
...
...
...
14
14
14
14
SI Units
16
16
16
16
16.000
16.000
16.000
0.875
0.938
1.000
1.031
141.48
151.03
160.35
164.98
16
16
16
16
16.000
16.000
16.000
16.000
1.062
1.125
1.188
1.219
169.59
178.89
188.11
192.61
16
16
16
16.000
16.000
16.000
1.250
1.438
1.594
197.10
223.85
245.48
1O0
...
...
...
...
...
350
...
...
...
350
350
...
...
...
...
400
5
...
...
20
...
400
...
...
30
...
...
...
...
400
...
...
...
...
40
...
...
400
400
80
...
...
...
...
...
1O0
...
...
...
...
...
...
400
120
400
400
140
160
...
...
400
400
60
...
...
...
...
...
350
140
160
...
...
...
9
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
120
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI
Customary Units
Outside
Diameter,
NPS
in.
[Note (111
in.
Wall
Plain
End
Thickness,
Weight,
lblft
Identification
[Standard (STDI,
Extra-Strong (XSI,
Schedule
Double
Extra
or
Strong (XXS1I
SI Units
[Note
No.
18
18
18
18
18.000
18.000
18.000
18.000
0.1 65
0.1 88
0.219
0.250
457
31.46
35.80
41.63
47.44
. .450
.
...
...
457
457
457
18
18
18
18
18.000
18.000
18.000
18.000
0.281
0.312
0.344
0.375
53.23
58.99 457
64.93
70.65
...
457
18
18
18
18
18.000
18.000
18.000
18.000
0.406
0.438
0.469
0.500
76.36
82.23 457
87.89
93.54
18
18
18
18
18.000
18.000
18.000
18.000
0.562
0.625
0.688
0.750
104.76 457
11 6.09
127.32
138.30 457
18
18
18
18
18.000
18.000
18.000
18.000
0.812
0.875
0.938
1.000
149.20
160.18
171.08
181.73
18
18
18
18
18.000
18.000
18.000
18.000
1.O62
1.125
1.156
1.188
192.29
202.94
208.1 5
213.51
18
18
18
18
18.000
18.000
18.000
18.000
1.250
1.375
1.562
1.781
223.82
244.37 457
274.48 457
308.79 457
20
20
20
20
20.000
20.000
20.000
20.000
0.188
0.219
0.250
0.281
39.82
46.31
52.78
59.23
...
...
...
...
20
20
20
20
20.000
20.000
20.000
20.000
0.312
0.344
0.375
0.406
65.66
72.28
78.67 508
85.04
...
...
20
20
20
20
20.000
20.000
20.000
20.000
0.438
0.469
0.500
0.562
91.59
97.92
104.23
116.78
...
...
xs
...
20
20
20
20
20.000
20.000
20.000
20.000
0.594
0.625
0.688
0.750
123.23 508
129.45
142.03
154.34. . .
. . .500
...
5
...
. . .450
...
...
...
10
450
450
450
...
450
20
STD
...
. . .450
...
xs
457 . . .
457 . . .
450
450
457 . . .
30
457 . . .
457 . . .
450
. . .450
450
450
40
...
...
457
457
...450
...
...
450
450
60
...
...
...
...
80
...
457
457
457
457
450
450
450
450
.457
..
.457
..
450
450
1O0 457 450
.457
..
450
...
...
...
457 . . .
120
140
160
. . . 450
... 450
. . . 450
500
STD500
...
450
5
...
500
500
10
...
500
508 ...
508 . . .
20
508 . . .
500
500
...
500
500
500
500
...
30
...
...
...
...
...
.
508
508
508
508
500
40
508
508
508
10
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
Wall
Plain
End
Outside
Mass,
DN
Diameter, Thickness,
mm
kglm
(211
mm
-
500
500
500
508
508
508
508
4.1 9
4.78
5.56
6.35
46.79
53.31
61.90
70.57
7.14
7.92
8.74
9.53
79.21
87.71
96.62
105.17
10.31
11.13
11.91
12.70
113.58
122.38
130.73
139.1 6
14.27
15.88
17.48
19.05
155.81
172.75
189.47
205.75
20.62
22.23
23.83
25.40
221.91
238.35
254.57
270.36
26.97
28.58
29.36
30.18
286.02
301.96
309.64
317.68
31.75
34.93
39.67
45.24
332.97
363.58
408.28
459.39
4.78
5.56
6.35
7.14
59.32
68.89
78.56
88.19
7.92
8.74
9.53
10.31
97.68
107.61
117.15
126.54
11.13
11.91
12.70
14.27
136.38
145.71
155.13
173.75
15.09
15.88
17.48
19.05
183.43
192.73
211.45
229.71
STD-ASME B3b-LOM-ENGL
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME 836.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Identification
[Standard
Extra-Strong (XS).
or Double Extra
Strong (XXSII
Customary Units
(STD).
Outside
Wall
End Plain
NPS Diameter. Thickness.Weight.
in
lblft
in
[Note (1 I1
.
12
.
20.000
20
20
178.89
0.875
20.000
191.14 20
0.938 20.000
20 1.000 20.000
203.1
20.000
20.000
20.000
20.000
20
20
20
20
...
...
...
...
1
1.031
1 .062
1.125
1.188
...
...
500
...
...
20.000
20
20
341.41
1.750
379.53 20
1.969
84 0.18822.000
22
22
22
22
...
500
...
50.99
0.219
22.000
58.13
0.250
22.000
65.24
0.281
22.000
559
79.64
0.500
114.92
5
...
...
...
10
...
0.875
0.938
1.000
1.062
1.125
197.60
211.19
224.49
237.70
251.05
22.000 22
22.000 22
22.000 22
22.000 22
22.000 22
1.188
1.250
1.312
1.375
1.438
264.31
277.27
290.15
303.16
316.08
...
97.17
... 7.14
559
311.19
319.94
337.91
355.63
...
20
...
...
...
...
...
...
30
...
xs
...
...
...
...
...
...
...
...
559
559
...
559
...
273.78
20.62 559
212.70
15.88
233.44
17.48
253.67
19.05
...
...
...
...
...
...
...
...
80
...
...
...
...
...
...
1 O0
...
...
150.38
11.13
160.69
11.91
171.10
12.70
191.70
14.27
60
...
...
...
559
559
559
559
...
...
...
...
107.64
7.92
118.60
8.74
...
...
...
...
...
75.895.56
86.55
6.35
559
...
11
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
...
...
...
...
22.000 22
22.000 22
22.000 22
22.000 22
22.000 22
26.19
26.97
28.58
30.18
...65.334.78 559
559
559
...
129.14
9.53 559
139.51
... 10.31 559
...
...
...
...
22.000
156.74
0.688
170.37
22.000
0.750
183.92
22.000
0.812
508
508
508
508
120
441.52
38.10508 500
140
508.15
44.45508 500
160
564.85
50.01508
...
...
...
STD
93.72
500
500
500
.31.75
. . 508 500
372.91
1 O0
500 381.55
32.54
508
...
390.05
33.32508 500
. . . 508 500
407.51
34.93
...
20.000
20.000
00.960.43822.000 22
22 0.469 22.000
107.95
22
22.000
22 0.56222.000
128.79
22
22
22
22
...
Mass.
kglm
500
500
500
500
80
...
...
...
2 22.000
22
22.000
22
86.69
0.375
22.000
22
0.406
22.000
22
2.810.62522.000
500
...
...
0.551.25020.000 20
20 1.28120.000
256.34
20
262.10
1.312
20.000
20
273.76
1.375
20.000
.
60 508
247.84
20.62
... 508
266.31
22.23
...
284.54
23.83508
...
302.30
25.40508
...
...
209.06
215.00
227.00
238.91
SI Units
End Plain WallOutside
Schedule
DN
Diameter. Thickness.
mm
mm
No
[Note (211
...
559
559
559
559
559
22.23
23.83
25.40
26.97
28.58
294.27
314.51
334.25
353.86
373.85
559
559
559
559
559
30.18
31.75
33.32
34.93
36.53
393.59
41 2.84
431.96
451.45
470.69
AND SEAMLESS WROUGHT STEEL PIPE
WELDED
B36.10M-2000
ASME
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'O)
Customarv Units
Outside
Diameter,
NPS
rNote IlIl
22.000
22.000
22.000
22.000
63.47
0.281
24.000
0.31 24.000
0.344
.406
24.000
94.71
24.000
110.32
24.000
24.000
24.000
in.
1.500
1.625
1.875
2.125
22
22
22
22
55.42
24 0.21824.000
24
0.250
24.000
24
24
24
24
0.375
24
24
0.438
24
24
24
24
Wall
Plain
End
Thickness,
Weight,
in.
lblft
Identification
[Standard (STD),
Extra-Strong (XS),
Double
Schedule
Extra
or
Strong (XXS)I
328.72
353.94
403.38
451.49
...
...
...
600
600
...
...
610 STD
24.000
...
24.000
...
117.98
125.61
140.81
156.17
...
xs
...
...
...
600
600
.61
..
600
20
152.48
...
610
...
...
...
...
10.31
600
600
600
600
23.83
24.61
25.40
26.97
344.48
355.28
366.19
387.79
61O
610
610
610
28.58
30.18
30.96
409.80
431.55
442.1 1
452.77
33.32
34.93
36.53
38.1O
473.87
495.38
51 6.63
537.36
610
610
610
610
61O
59.54
547.74
557.97
640.07
720.1 9
808.27
660
660
660
660
102.366.35
114.96
7.14
127.367.92
140.378.74
...
600
600
...
...
...
600
31.75
24.000
24.000
24.000
24.000
24
24
24
24
1.312
1.375
1.438
1.500
318.21
332.56
346.83
360.79
...
...
...
610
...
610
...
610
...
610
...
600
600
600
600
1.531
1.562
1.812
2.062
2.344
367.74
374.66
429.79
483.57
542.64
...
1O0
24.000
24.000
24
24
24
24
24
600
38.89
39.67
600
46.02
52.37
26
26
26
26
94.35
60
...
80
...
120
140
160
0.281
...
...
...
0.344
...
...
...
77.26
...
10
12
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
175.67
187.07
209.65
232.67
61O
61O
61O
61O
275.10
289.71
296.86
304.00
...
11.91
12.70
14.27
15.88
600
1.125
1.188
1.219
1.250
600
600
600
11.13
...
24
24
24
24
...
...
8.74
9.53
255.43
277.63
299.71
322.23
600
600
...
129.60
O
141.12
610
164.38
17.48
19.05
20.62
22.23
24.000
24.000
24.000
24.000
24,000
24.000
24.000
82.58
94.53
106.15
117.60
61O
61O
61O
61O
...
...
...
5.54
6.35
7.14
7.92
600
600
600
600
...
600
61O
61O
610
610
40
24.000
24.000
...
489.44
...
...
...
...
...
O
600
30
231.25
238.57
245.87
260.41
600
559
559
559
559
...
0.938
0.969
1.000
1.062
...
...
kglm
610
610
610
61O
...
600
. . . 38.1
41.28
...
47.63
...
53.98
...
5
10
...
...
Wall Outside
DN
Diameter,
Thickness,
Mass.
[Note (211
mm
mm
24
24
24
24
68.82 0.25026.000
26.000
0.312
26.000
26.000
24.000
24.000
600
..,
171.45 240.688 24.000
24
186.41
0.750
24.000
201.28 240.812 24.000
216.31 240.875 24.000
No.
527.05
120
600.67
140
672.30
160
24.000
0.469
0.500
0.562
0.625
Plain
...
...
79.01
End
...
...
...
2
SI Units
...
...
...
...
S T D - A S M E B 3 b - L O M - E N G L 2000 D 0759b70 Ob21950 928 m
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customary Units
Wall
Plain
End
Outside
NPS Diameter, Thickness,Weight,
[Note (111
in.
in.
lblft
26.000
26.000
26.000
26.000
26.000
26.000
26
26
26
26
26
26
26
26
Identification
[Standard (STDI,
Extra-Strong (XS],
or Double Extra
Strong (XXSII
102.72
111.08
119.69
128.00
STO
26.000
0.375
0.406
0.438
0.469
26.000
26.000
26.000
26.000
0.500
0.562
0.625
0.688
136.30
152.83
169.54
186.16
xs
0.750
0.812
0.875
0.938
1.000
202.44
218.64
235.01
251.30
267.25
...
SI Units
Outside
Wall
Plain
End
Schedule
DN
Mass,
Diameter, Thickness,
No.
[Note (211
kglm
mm
mm
...
...
...
...
...
...
20
...
...
...
...
...
...
...
...
26.000
26
26
26
26
26
28.000
28.000
28.000
28.000
28
28
28
28
0.250
0.281
0.312
0.344
74.16
83.26
92.35
101.70
...
...
...
...
28.000
28.000
28.000
28.000
28
28
28
28
0.375
0.406
0.438
0.469
110.74
119.76
129.05
138.03
STD
...
28
28
28
28
28.000
0.500
0.562
0.625
0.688
146.99
164.84
182.90
200.87
xs
28.000
28.000
28
28
28
28
28
28.000
0.750
0.812
0.875
0.938
1.000
218.48
236.00
253.72
271.36
288.63
...
0.250
0.281
0.312
0.344
79.51
89.27
99.02
109.06
28.000
28.000
28.000
28.000
30.000
26.000
28.000
30.000
30.000
30
30
30
30
30.000
30.000
30.000
30.000
30
30
30
30
0.375
0.406
0.438
0.469
30.000
30.000
30.000
30.000
30
30
30
30
0.500
0.562
0.625
0.688
30.000
...
...
...
...
...
...
...
...
...
...
...
10
...
...
10
...
...
7.14
...
...
118.76
128.44
138.42
148.06
STD
...
...
...
...
...
157.68
176.86
196.26
215.58
xs
20
...
30
...
13
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
19.05
20.62
22.23
23.83
25.40
301.12
325.14
349.64
373.87
397.51
71
71
71
71
7.14
110.35
123.94
137.32
151.37
325.08
351.O7
377.60
403.84
429.46
...
...
660
660
660
660
660
700
19.051 71
700
20.62
711
700
22.23
711
700
71 1
700
71 1
5
...
202.74
227.25
252.25
276.98
...
...
...
...
...
...
...
...
...
1
1
1
1
12.70
14.27
15.88
17.48
...
30
...
...
...
700
6.35
700
700
7.92
700
8.74
660
660
660
660
218.71
245.19
272.23
298.96
20
...
...
...
...
...
...
...
...
...
152.88
165.19
178.10
190.36
12.701 71
700
700
14.271 71
700
15.88
711
700
17.48
711
...
...
...
...
9.53
10.31
11.13
11.91
164.86
178.16
192.10
205.34
...
...
...
660
660
660
660
700
9.5371 1
10.311 71
700
700
11.13
71 1
700
11.911 71
...
...
...
...
8.74
762
762
762
762
23.83
25.40
6.35
7.92
...
...
762
762
762
762
11.13
11.S1
176.85
191.12
206.10
220.32
...
...
...
...
762
762
762
762
12.70
14.27
15.88
17.48
234.68
263.14
292.20
320.95
. .10.31
.
9.53
118.34
132.92
147.29
162.36
STDOASME B 3 b - L O H - E N G L 2000 W 0 7 5 7 b 7 0 Ob21752 Bblf
ASME B36.10M-2000
m
WELDED AND SEAMLESS WROUGHT STEEL PIPE
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI
Customary Units
Outside
Diameter.
NPS
[Note (1)I
30.000
30.000
30.000
30.000
30
30
30
30
30.000
30
30
30
30
30
30.000
30.000
30.000
32.000
32.000
126.78
0.375
32
32
32
32.000
32
0.750
0.812
0.875
0.938
310.01
328.53
30.000
347.26
365.90
384.17
32.000
32.000
32.000
32.000
32.000
.
234.51
253.36
272.43
291.41
1.000
1.062
1.125
1.188
1.250
.
.
0.406
0.438
0.469
137.12
147.78
158.08
No.
...
...
...
...
...
...
...
...
...26.97
. . 28.58
.
461.41
488.88
516.93
544.68
571.79
...
...
...
800
800
800
800
813
813
813
813
6.35
7.14
7.92
8.74
126.32
141.90
157.25
173.35
800
800
800
800
813
813
813
813
188.839.53
10.31
11.13
11.91
204.09
220.10
235.29
800
800
800
800
81 3
813
813
813
12.70
14.27
15.88
17.48
250.65
281.09
312.17
342.94
813
373.00
402.94
493.35
522.80
552.88
582.64
61 1.72
10
STD
...
...
...
...
...
...
...
...
32.000
32.000
32.000
32.000
32
32
32
32
0.750
0.812
250.55
270.72
...
...
0.938
311.47
32.000
32.000
32.000
32.000
32.000
32
32
32
32
32
1.000
1.062
1.125
1.188
1.250
331.39
351.23
371.31
391.30
410.90
...
...
34.000
34
34
34
34
0.250
0.281
0.312
90.20
101.29
112.36
...
...
...
...
20
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
10
...
433.52
813
3 81
19.05
20.62
22.23
23.83
800
800
800
800
800
813
813
813
813
813
25.40
26.97
28.58
30.18
31.75
...
864
864
864
864
134.31
6.35
7.14
7.92
8.74
864
864
234.10864
864
9.53
10.31
11.13
250.27
11.91
200.82
217.06
864
864
864
864
12.70
14.27
15.88
17.48
266.63
299.04
332.14
364.92
...
...
...
...
...
...
...
...
xs
...
20
...
...
30
40
...
...
...
...
14
30.1 8
800
3 81800
800
800
...
...
...
STD
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
25.40
...
...
30
40
179.06
200.89
222.99
245.00
349.04
...
...
...
0.500
0.562
0.625
0.688
19.05
377.01
20.62
405.56
22.23
433.81
23.83
...31.75
...
34.000
34.000
34.000
34.000
762
762
762
762
...
...
xs
...
34
34
34
34
...
.
Mass
...
168.37
188.87
209.62
230.29
0.438
...
.
762
762
762
762
762
0.500
0.562
0.625
0.688
0.375 34
34.000
0.406
34
34.000
34 157.14
34.000
0.469
34
34.000
...
...
...
...
32
32
32
32
34.000
34.000
34.000
Plain Wall Outside
DN
Diameter.
Thickness
[Note (211
mm
kg/m
mm
...
...
84.85
95.28
105.69
116.41
End
...
...
...
...
...
0.250
0.281
0.312
0.344
SI Units
32.000
32.000
32.000
32.000
0.344
34.79
32
32
32
32
in.
Wall
Plain
End
Thickness. Weight
in.
lblft
Identification
[Standard (STDI
Extra-Strong (XSI
or Double
Extra
Schedule
Strong (XXS)I
...
...
...
...
463.78
150.88
167.21
184.34
S T D - A S M E B3b.LOM-ENGL
2000
m 0759b70 Ob2L952
PIPE
WELDEDSTEEL
AND
WROUGHT
SEAMLESS
7T0
m
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customarv Units
Outside
Wall
Plain
End
NPS Diameter, Thickness,Weight,
[Note (1 11 in. in.
lblft
Identification
[Standard (STD),
Extra-Strong (XS),
or Double Extra
Strong [XXS)]
34
34
34
34
34.000
34.000
34.000
34.000
0.750
0.812
0.875
0.938
266.58
288.08
309.84
331.52
...
34
34
34
34
34
34.000
34.000
34.000
34.000
34.000
1 .o00
1 .O62
1.125
1.188
1.250
352.77
373.94
395.36
416.70
437.62
...
...
...
36
36
36
36
36.000
36.000
36.000
36.000
0.250
0.281
0.312
0.344
95.54
107.30
119.03
131.12
...
36
36
36
36
36.000
36.000
36.000
36.000
0.375
0.406
0.438
0.469
142.81
154.48
166.51
178.14
STD
36
36
36
36
36.000
36.000
36.000
36.000
0.500
0.562
0.625
0.688
189.75
212.90
236.35
259.71
xs
...
...
...
36
36
36
36
36.000
36.000
36.000
36.000
0.750
0.812
0.875
0.938
282.62
305.44
328.55
351.57
...
...
...
...
36
36
36
36
36
36.000
36.000
36.000
36.000
36.000
1 .o00
1 .O62
1.125
1.188
1.250
374.15
396.64
419.42
442.10
464.35
38
38
38
38
38.000
38.000
38.000
38.000
0.312
0.344
0.375
0.406
125.70
138.47
150.83
163.16
38
38
38
38
38.000
38.000
38.000
38.000
0.438
0.469
0.500
0.562
175.87
188.17
200.44
224.92
38
38
38
38
38.000
38.000
38.000
38.000
0.625
0.688
0.750
0.812
249.71
274.42
298.65
322.80
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
SI Units
Schedule
No.
[Note
...
...
...
...
...
...
...
...
...
...
900
...
...
...
900
900
900
...
...
...
...
STD
...
xs
...
...
...
...
...
...
...
...
...
...
...
Outside
End
Plain
Wall
DN
Diameter, Thickness,
mm
mm
(211
...
...
...
864
864
864
86.4
...
...
...
...
...
900
900
Mass,
kglm
19.05
20.62
22.23
23.83
396.96
428.88
461.48
493.75
25.40
26.97
28.58
30.18
31.75
525.30
556.73
588.83
620.60
651.65
6.35
7.14
7.92
8.74
142.14
159.68
176.97
195.12
...
900
914
914
914
914
...
...
...
...
900
900
900
900
914
914
914
914
9.53
10.31
11.13
11.91
212.57
229.77
247.82
264.96
900
914
914
914
914
12.70
14.27
15.88
17.48
282.29
316.63
351.73
386.47
...
...
...
900
900
900
914
914
914
914
19.05
20.62
22.23
23.83
420.45
454.30
488.89
523.14
...
900
900
900
900
900
914
914
914
914
914
25.40
26.97
28.58
30.18
31.75
556.62
589.98
624.07
657.81
690.80
...
7.92
0.74
9.53
10.31
186.94
206.11
224.56
242.74
10
20
...
900
30
...
40
...
...
...
...
...
...
...
...
965
965
965
965
...
...
...
...
...
...
...
...
965
965
965
965
11.13
11.91
12.70
14.27
261.82
279.94
298.26
334.58
...
...
...
...
965
965
965
965
15.88
17.48
19.05
20.62
371.70
408.46
444.41
480.24
...
...
...
...
...
...
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME 836.1OM-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI
Customary Units
Extra-Strong
End Plain WallOutside
NPS Diameter. Thickness.Weight.
in.
lblft
[Note (1)l
in.
347.26
371.63
395.53
419.35
...
...
...
...
...
...
...
38.000
38.000
38
38
38
443.47
467.50
491.07
38.000
32.37 0.312 40.000
45.83 0.344 40.000
5 0.375 40.000
4 0.406 40.000
40
40
40
40
40.000
40.000
40.000
40.000
40
40
40
40
0.438
0.469
0.500
0.562
185.24
198.19
211.13
236.93
40.000
40.000
40.000
40.000
40
40
40
40
0.625
0.688
0.750
0.812
263.07
289.13
314.69
340.16
...
...
...
...
40.000
40.000
40.000
40
40
40
40
0.875
0.938
1.000
1.062
365.97
391.68
416.91
442.05
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
40.000
40.000
40.000
40
40
40
1.125
1.188
1.250
467.52
492.90
517.80
42.000
42.000
42.000
42.000
42
42
42
42
0.344
0.375
0.406
0.438
153.18
166.86
180.52
194.60
42.000
42.000
42.000
42.000
42
42
42
42
0.469
0.500
0.562
0.625
208.22
221.82
248.95
276.44
42.000
42.000
42.000
42.000
42
42
42
42
0.688
0.750
0.812
0.875
303.84
330.72
357.52
384.67
42.000
42.000
42.000
42.000
42
42
42
42
0.938
1.000
1.062
1.125
...
411.74
438.29
...
464.76
491.57
...
...
...
1 O00
1 O00
1 O00
1 O00
1016
1016
1016
1016
15.88
17.48
19.05
20.62
391.67
430.45
468.37
506.17
1 O00
1 O00
1 O00
1 O00
1 016
1 016
1 016
1 016
22.23
23.83
25.40
26.97
544.81
583.08
620.51
657.82
...
1 016
...
1 O00
1 O00
1 O00
1 016
1 016
28.58
30.18
31.75
695.96
733.73
770.67
...
...
...
...
1 067
1 067
1 067
1 067
8.74
9.53
10.31
1 1.1
3
228.10
248.53
268.67
289.82
...
1 067
1
1
1
11.91
12.70
14.27
15.88
309.90
330.21
370.48
41 1.64
1
1
1 O67
1
17.48
19.05
20.62
22.23
452.43
492.33
532.1 1
572.77
1 067
1 067
1 067
1 067
23.83
25.40
26.97
28.58
613.05
652.46
691.75
731.91
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
067. . .
067. . .
067
. . 067
.
. . .067
...
...067
...
...
...
16
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
275.82
294.92
314.23
352.53
...
xs
...
660.01
695.77
730.74
965
965
965
...30.18
...31.75
11.13
11.91
12.70
14.27
...
...
...
. . .28.58
1 016
1 016
1 016
1 016
...
...
...
516.85
553.1 1
588.57
623.90
1 O00
1 O00
1 O00
1 O00
...
...
...
22.23
23.83
25.40
26.97
...
...
xs
STD
965
965
965
965
1
196.90 7.92
1
217.11 8.74
1016236.54 9.53
1016255.71 10.31
...
...
...
...
Mass.
kglm
1016
O00
1016
O00
1 O00
1 O00
...
STD
40.000
End Plain WallOutside
Schedule
DN
Diameter. Thickness.
mm
mm
No.
[Note (2)I
...
...
...
38.000
1.125
1.188
1.250
SI Units
...
38
38
38
38
38.000
38.000
38.000
0.875
0.938
1.000
1.062
Identification
[Standard (STD).
(XS).
or Double Extra
Strong lXXSll
...
S T D * A S M E B3b.LOM-ENGL 2000
WELDED AND
WROUGHT
SEAMLESS
PIPE
0757b70 Ob21754 573 D
ASME B36.10M-2000
STEEL
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE ICONT'D)
42
42
42O
. oo
42O
. oo
1.188
1.250
518.30
544.52
44
44
44
44
44O
. oO
0.344
44.Ooo
44.m
0.406
0.438
160.54
174.80
189.20
203.97
44
44.Ooo
0.469
44.Ooo
44.Ooo
0.500
0.562
0.625
44.Ooo
44
44
44
44.Ooo
44
44
44.Ooo
44
44.000
44
44
44.Ooo
44
44
44
44
44
44.Ooo
46
46
46
46
46O
. Oo
46O
. oo
46.Ooo
46
O
. oo
46O
. oo
46O
. oo
46
46
46
46
44.m
44.000
44.Ooo
44.Ooo
44O
. oo
44.Ooo
46.Ooo
46O
. oo
46
46
46
46
46
46
O
. oo
0.375
0.688
0.750
0.812
0.875
0.938
318.55
346.76
374.88
403.38
431.79
1.o00
1.o62
1.125
1.188
1.250
459.67
487.47
515.63
543.70
57 1.25
0.344
167.89
182.90
197.88
213.33
0.375
0.406
0.438
0.469
0.625
228.27
243.20
272.98
303.16
0.688
0.750
0.812
0.875
0.938
333.26
362.79
392.24
422.09
451.85
481.O5
510.17
539.68
569.10
597.97
175.25
190.92
206.56
222.70
0.500
0.562
46
46
46
46
46
46O
. oo
46O
. oo
46O
. oo
46O
. oo
1.o00
1.o62
1.125
1.188
1.250
48
48.Ooo
0.344
48
48
48
48O
. oo
48.Ooo
48.Ooo
218.25
232.51
260.97
289.80
0.375
0.406
0.438
Schodulo
No.
[Noto
ON
...
...
...
...
...
...
...
...
...
STO
...
...
...
...
xs
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
.
.
...
...
...
...
STD
...
...
...
xs
...
...
...
...
...
...
...
...
...
...
...
...
...
STD
...
...
...
...
...
...
...
...
...
...
...
,..
...
...
...
...
.
f
.
...
...
...
...
17
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
I
(2I1
Outrido
W d
PhinEnd
Diamotor, Thlcknou. Mur.
mm
mm
kdm
1067
1067
30.18
31.75
771.69
810.80
100 1
100 1
100 1
1 100
1118
1118
1118
1118
9.53
260.52
10.31
11.13
281.64
303.82
100 1
1 100
100 1
1 100
1118
1 118
1 118
1 118
11.91
12.70
14.27
15.88
324.88
348.18
388.42
431.62
1 100
1 100
1 100
100 1
1 100
1 118
1 118
1 118
1 118
1 118
17.48
19.05
20.62
22.23
23.03
474.42
516.29
558.04
600.73
643.03
1 100
1 100
1 100
100 1
1 100
1 118
1 118
1 118
1 118
1 118
25.40
26.97
28.58
30.18
31.75
684.41
725.67
767.85
809.65
850.54
1168
1 168
1 168
1168
8.74
9.53
10.31
11.13
249.87
272.27
294.35
317.54
1 168
1 168
1 168
1168
11.91
12.70
14.27
15.88
339.56
361.84
406.02
451.20
1168
1 168
1 168
1168
1168
17.48
19.05
20.62
22.23
23.03
495.97
539.78
583.47
628.14
672.41
1168
1 168
1168
1 168
1168
25.40
26.97
28.58
30.18
31.75
715.73
758.92
803.09
1219
1219
1219
1 219
8.74
9.53
10.31
11.13
260.86
284.25
307.32
331.54
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
200 1
200 1
200 1
200 1
8.74
239.09
846.86
889.69
WELDED AND SEAMLESS WROUGHT
PIPE
STEEL
ASME B36.10~-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customaw Units
Outside
Diameter,
NPS
[Note (111
48.000
48.000
48.000
48.000
48
48
48
48
in.
48.000
Wall
Plain
End
Thickness,Weight,
in.
lblft
0.469
0.500
0.562
0.625
Identification
[Standard (STD),
Extra-Strong (XSt,
.or Double Extra
Strong (XXSII
Schedule
[Note
No.
...
xs
...
...
...
...
...378.83
...
...
...
409.61
440.80
471.90
...
...
238.30
253.89
285.00
316.52
48
48
48
48
48
48.000
48.000
48.000
48.000
0.688
0.750
0.812
0.875
0.938
48
48
48.000
48
48
48
48.000
48.000
48.000
1.o00
1.O62
1.125
1.188
1.250
502.43
532.88
563.73
594.50
624.70
52
52
52
52
52.000
52.000
52.000
52.000
0.375
0.406
0.438
0.469
206.95
223.93
241.42
258.36
52
52
52
52
52.000
52.000
52.000
52.000
0.500
0.562
0.625
0.688
275.27
309.03
343.25
377.39
...
52
52
52
52
52.000
52.000
52.000
52.000
0.750
0.81 2
0.875
0.938
41 0.90
444.33
478.21
512.01
...
...
...
...
52
52
52
52
52
52.000
52.000
52.000
52.000
52.000
1.o00
1.O62
1.125
1.188
1.250
545.19
578.29
61 1.84
645.30
678.1 5
...
56
56
56
56
56.000
56.000
56.000
56.000
0.375
0.406
0.438
0.469
222.99
241.29
260.15
278.41
56
56
56
56
56.000
56.000
56.000
56.000
0.500
0.562
0.625
0.688
296.65
333.06
369.97
406.80
56
56
56
56
56.000
56.000
56.000
56.000
0.750
0.812
0.875
0.938
442.97
479.05
51 5.63
552.12
48.000
SI Units
347.97
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
...
...
...
...
...
'
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1219
1219
1 219
1219
11.91
12.70
14.27
15.88
354.54
377.81
423.97
471.17
1200
1200
1200
1200
1200
1219
1219
1219
1219
1219
17.48
19.05
20.62
22.23
23.83
517.95
563.74
609.40
656.10
702.38
1 200
1200
1 200
1 200
1 200
1219
1219
1219
1 219
1 219
25.40
26.97
28.58
30.18
31.75
747.67
792.84
839.04
884.82
929.62
..
1 321
1 321
1 321
1 321
9.53
10.31
11.13
11.91
308.23
333.26
359.54
384.50
...
...
...
...
1 321
1 321
1 321
1 321
12.70
14.27
15.88
17.48
409.76
459.86
511.12
561.93
...
1 321
1 321
1 321
1 321
19.05
20.62
22.23
23.83
61 1.66
661.27
712.02
762.33
...
1 321
1 321
1 321
1 321
1 321
25.40
26.97
28.58
30.18
31.75
811.57
860.69
910.93
960.74
1 009.49
1 400
1 400
1 400
1 400
1 422
1 422
1 422
1 422
9.53
10.31
11.13
11.91
331.96
358.94
387.26
414.17
1 400
1 422
1 422
1 422
1 422
12.70
14.27
15.88
17.48
441.39
495.41
550.67
605.46
1 422
1 422
1 422
1 422
19.05
20.62
22.23
23.83
659.1 1
71 2.63
767.39
821.68
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1200
200 1
200 1
1200
...
...
...
Wall
Plain
End
Outside
DN
Diameter, Thickness, Mass,
mm
kglm
(211
mm
...
...
...
...
...
...
...
...
1 400
1 400
1 400
...
1 400
...
1 400
1 400
...
...
...
1 400
S T D *ASME
SEAMLESS
WELDED AND
WROUGHT
PIPE
STEEL
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customary Units
Outside Extra-Strong
Wall
End Plain
NPS Diameter, Thickness,Weight,
Iblft
in.
[Note (111
in.
587.95
1.000
56.000
062 56.000
659.94
1.125
56.000
696.10
.250 56.000
56
56
56
561.188
56
.375 60.000
60
60258.65
0.406
60.000
60.000
278.88
60
60
.469 60.000
.500 60.000
60
357.09
0.562
60.000 60
60
60.000
60
.750 60.000
0.812
60.000
875 60.000
,938 60.000
Identification
[Standard (STD),
(XS),
or Double Extra
Strong (XXS)]
630.71
1.000
60.000 60
669.11 601.062 60.000
60708.05
1.125
60.000
746.90 601.188 60.000
60
60.000
785.05
1400
1400
1400
1400
1400
1422
1422
1422
1422
1422
25.40
26.97
28.58
30.18
31.75
874.83
927.86
982.12
1035.91
1 088.57
...
...
...
1 500
1 500
1 500
1 500
1 524
1 524
1 524
1 524
9.53
10.31
11.13
11.91
355.94
384.87
415.26
444.13
...
...
436.22
...
...
1 500
1 500
500 1
1 500
1 524
1 524
1 524
1 524
12.70
14.27
15.88
17.48
473.34
531.30
590.62
649.44
513.77
...
...
...
...
...
1 500
1 500
1 500
1 500
1 524
1 524
1 524
1 524
19.05
20.62
22.23
23.83
707.03
764.50
823.31
881.63
...
...
...
1500
1 500
1500
1 500
500 1
1524
1 524
1524
1 524
1 524
25.40
26.97
28.58
30.18
31.75
938.73
995.71
1 054.01
1111.83
1 168.44
1 600
1 600
1 600
1 600
1 626
1 626
1 626
1 626
9.53
10.31
11.13
11.91
379.91
410.81
443.25
474.09
1 600
1 600
1 600
1 600
1 626
1 626
1 626
1 626
12.70
14.27
15.88
17.48
505.29
567.20
630.56
693.41
...
...
1 600
1 600
1 600
1 600
1 626
1 626
1 626
1 626
19.05
20.62
22.23
23.83
754.95
816.37
879.23
941.57
...
1 600
1 600
1 600
1 600
1 600
1 626
1 626
1 626
1 626
1 626
25.40
26.97
28.58
30.18
31.75
1 002.62
1 063.55
1 125.90
1187.74
1 248.30
..
...
.. .
..
1 727
1 727
1 727
1 727
11.91
12.70
14.27
15.88
503.75
536.92
602.74
670.12
298.47
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
64.000
64.000
64.000
0.438
0.469
255.06
276.01
297.61
318.52
64
64
64
64
64.000
64.000
64.000
64.000
0.500
0.562
0.625
0.688
339.41
381.12
423.42
465.64
64
64
64
64
64.000
64.000
64.000
64.000
0.750
0.812
0.875
0.938
507.1 1
64
64
64
64
64
64.000
64.000
64.000
64.000
64.000
1.o00
1.O62
1.125
1.188
1.250
673.47
714.52
756.15
797.69
838.50
68
68
68
68
68.000
68.000
68.000
68.000
0.469
0.500
0.562
0.625
338.57
360.79
405.15
450.15
0.375
0.406
...
...
...
...
...
...
...
...
1.250
64
64
64
64
64.000
kglm
...
...
...
...
...
0.438
60
60
60
60
Mass,
...
...
...
...
731.60
0.625
0.688
End Plain WallOutside
Schedule
DN
Diameter, Thickness,
mm
mm
No.
[Note
(211
...
56.000
60.000
396.70
SI Units
548.49
590.46
632.34
...
...
...
...
. ..
*
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
19
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customarv Units
Wall
Plain
End
Outside
NPS Diameter. Thickness.Weight.
lblft
in
in.
[Note (111
.
68.000
68.000
68.000
68.000
68.000
68
68
68
68
68
0.688
0.750
0.812
0.875
0.938
495.06
539.18
583.21
627.87
672.45
68.000
68.000
68.000
68.000
68.000
68
68
68
68
68
1.000
1.062
1.125
1 188
1.250
716.23
759.93
804.26
848.49
891.95
382.17 0.500 72.000
72.000
72.000
72.000
72
72
72
72
0.562
0.625
0.688
429.18
476.87
524.48
750
12
72.000
72.000
72.000
72.000
72
72
72
72
72.000
72.000
72.000
1.188 72.000
72.000
72
72
72
72
72
3.55
.21
0.500 76
0.562 76
503.60
0.625
76
0.688
76
76.000
76.000
900.47
80.000
80.000
80.000
...
...
...
...
...
...
...
...
568.87 12.70
.
...
...
...
...
...
...
...
850.32
...
800919.60
...
338.83
76.000
76.000
76.000
76.000
76.000
76.000
76
76
1.125
76
76
76
76.000
76.000
76.000
76.000
76.000
80
80
80
80
80
80
80
...
80.000
...
1. . .
758.99
829
852.36
30.18
600.50
...
800
...
800
...
...
...
1 ...
829
...
...
...
...
...
...
1
12.70
...
674.18
800 ...
...
800
0.750
0.812
0.875
0.938
603.32
652.65
702.70
752.66
...
...
...
...
...
...
1.000
1.062
801.75
850.75
...
...
1.188
1.250
950.09
998.85
0.562
0.625
0.688...
0.750
477.25
530.32
583.32
635.39
...
687.37
740.12
792.77
...
...
...
...
...
...
...
...
...
19.05
20.62
1
1 829
1 829
1 829
1
...
...
...31.75
930
...
...
...
...
...
...
...
...
...
...
...
...
...
...
1 060.87
1 829
31.75
407.25
1
19.05
1 930
20.62
1 930
22.23
1 930
23.83
1 930
...
990.52
22.23
23.83
1 829
...
...
...
...
. . 25.40
. 930
...26.97
930
...
638.64
710.06
780.92
1129.78
25.40
26.97 198.57
1
1 268.98
28.58
1
1 930
1 930
...
824.45
17.48
897.77
970.96
1 045.89
1 120.22
1
1
1 193.05
1 265.74
. . 30.18
. 930 1
1414.01
1 486.33
1
2 O00
2000
2000
2000
2 032
2 032
2 032
2 032
14.27
15.88
17.48
19.05
710.08
789.56
868.43
945.69
2000
2000
2000
2000
25.40
2 032
2 032
2 032
2 032
20.62
22.23
23.83
1 022.83
20
c
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
736.95
802.40
867.73
934.60
1 000.92
14.27
15.88
17.48
1 829
...
...
...
...
...
...
...
...
...
...
829
.
Mass
kglm
1 065.89
1130.73
1 197.09
1 262.92
1 327.39
25.40
1 727
26.97
1 727
28.58
1 727
30.18
1 727
31.75
1 727
1
1 829
1 829
1 829
1 800
1
1 800
1
1
17.48
19.05
20.62
22.23
23.83
1 727
1 727
1 727
1 727
1 727
1829
800
1 800
1 800
1 800
...
930
14.27
749.62 ...
15.88
...
...
0.812
0.875
0.938
...
...
...
...
...
.
.
...
...
0.938
1.000
1.062
1.125
1
.
...
...
...
805.34
Outside
End
Plain
Wall
Schedule
DN
Diameter. Thickness
mm
mm
No
[Note (211
...
...
...
...
712.55
SI Units
...
f
76
76
76
76
80
80.000
80.000
80.000
1 1.000 80.000
.
Identification
[Standard (STDL
Extra-Strong (XS).
or Double Extra
Strong (XXSH
1 101.81
1 180.17
1 256.94
STEEL PIPE
WELDED AND
WROUGHT
SEAMLESS
836.10M-2000
ASME
TABLE 1 DIMENSIONSANDWEIGHTS OF
WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D)
Customary Units
Outride
Wall
Plain
End
NPS
Diameter, Thickness,Weight,
[Note (111
in.
in.
lblft
80.000
80
80
80
52.30
1.25080.000
80
80.000
80.000
1.062
1.125
1.188
896.17
948.57
1,000.89
Identification
[Standard (STD),
Extra-Strong (XS),
or Double Extra
Strong (XXS)]
SI Units
Outside
Wall
End
Plain
DN
Schedule
Dlameter, Thickness, Mass,
mm
mm
No.
[Note lZ)l
kglm
...
...
...
...
... ...
...
...
2000
2000
2000
2000
2 032
2 032
2 032
2 032
26.97
28.58
30.18
31.75
1 333.59
1 412.06
1 489.92
1 566.20
NOTES:
(1) NPS (Nominal Pipe Size) is a dimensionless designator that has been substituted in the customary units section for the
previous term Inch Nominal Size.
(2) DN (Nominal Diameter) is a dimensionless designator used in the SI (metric) system to describe pipe size.
21
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
AMERICAN NATIONAL STANDARDS FOR PRODUCT SIZES
Preferred Thicknesses for Uncoated Thin Flat Metals (Under 0.250 ln.). . B32.1-1952(R1994)
Preferred Diameters for Round Wire - 0.500 Inches and Under ........ B32.2-1969(R1994)
Preferred Metric Sizes for Flat Metal Products.. ......................
832.3M-l984(R1994)
Preferred Metric Sizes for Round, Square, Rectangle and Hexagon
Metal Products ....................................................
B32.4M-l980(R1994)
Preferred Metric Sizes for Tubular Metal Products Other Than Pipe.. ... B32.5-1977(R1994)
Preferred Metric Equivalents of Inch Sizes for Tubular Metal Products
Other Than Pipe., .................................................
B32.6M-l984(R1994)
.B36.10M-2000
Welded and Seamless Wrought Steel Pipe.. ...............................
Stainless Steel Pipe.. ...............................................
B36.19M-l985(R1994)
The ASME Publications Catalog shows a complete list of all the Standards published by the
Society. For a complimentary catalog, or the latest information about our publications, call
1-800-THE-ASME (1-800-843-2763).
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
ASME Services
ASME is committed to developing and delivering technical information. At ASME's Information Central. we make
every effort to answer your questions and expedite your orders. Our representatives are ready to assist youinthe
following areas:
ASME Press
Codes & Standards
Credit Card Orders
IMechE Publications
Meetings & Conferences
Member Dues Status
Member Services & Benefits
Other ASME Programs
Payment Inquiries
Professional Development
Short Courses
Publications
Public Information
Self-study Courses
Shipping Information
Subscriptions/Journals/Magazines
Symposia Volumes
Technical Papers
How can you reach us? It's easier than ever!
There are four options for making inquiries* or placing orders. Simply mail, phone,fax, or E-mail us and an Information
Central representative will handle your request.
Mail
Free
Call Toll
ASME
US & Canada: 800-THE-ASME
22 Law Drive, (800-843-2763)
Box 2900
Fairfield, New Jersey
Mexico: 95-800-THE-ASME
800-843-2763) 07007-2900
Universal: 973-882- 1167
*
FU-24 hours
E-Mail973-882-1717 hours 24
973-882-5155
Infocentral@asme.org
Information Central staff are not permitted to answer inquiries about the technical content of this code or standard.
Infomation as to whether or not technical inquiries are issued to this code or standard is shown on the copyright
page. All technical inquiries must be submitted in writing to the staff secretary. Additional procedures for inquiries
may be listed within.
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services
COPYRIGHT American Society of Mechanical Engineers
Licensed by Information Handling Services