A4 CAD
2
1
4
3
6
5
8
7
PERMANENT REINSTATEMENT TO COMPLY WITH
LOCAL AUTHORITY SPECIFICATION / DRAWING
FINISHED SURFACE LEVEL
300 MAX.
A
WARNING TAPE
2 X YELLOW MARKER WARNING
TAPE 250 mm WIDE
ESB CODE : 2955090
B
C
FOR TRENCH BACKFILL DETAILS REFER
TO TABLE BELOW
1 X RED CABLE MARKER (20 m ROLL)
200 mm WIDE X 2.5 mm THICK
ESB CODE : 2955101
C
75
125 mm OD uPVC DUCT IN
ACCORDANCE WITH ESB CODE: 9317553
50
175
FOR DUCT SURROUND DETAILS REFER
TO TABLE BELOW
D
=
=
12 mm DIAMETER PULL ROPE
325 MIN.
TRENCH LOCATION
MIN. DEPTH OF
COVER TO TOP
OF DUCTS (C)
TRENCH BACKFILL
DETAILS
DUCT SURROUND
MATERIAL
E
EXISTING FOOTPATH
(NON HOUSING ESTATE)
450 mm
CL 804
NEW ESTATE & NON ESTATE
FOOTPATH
600 mm
CL 804
ESB N APPROVED
SAND
NEW & EXISTING ESTATE
ROADS, ESTATE GRASS VERGES &
ADJOINING ROADS
600 mm
CL 804
ESB N APPROVED
SAND
SUITABLE
BACKFILL MATERIAL
600 mm
ESTATE OPEN GRASSED AREAS
F
NEW & EXISTING NON
ESTATE ROADS
FARM LAND, FOREST TRACK,
BOG LAND, PUBLIC OPEN GRASSED
AREAS & PRIVATE PROPERTY
ESB N APPROVED
SAND
CBGM B
750 mm
CL 804
ESB N APPROVED
SAND
750 mm
CL 804
CBGM B
NOTES:
1. RED CBGM B BACKFILL IN ACCORDANCE WITH CLAUSE 822 AND COMPACTED TO
2
CLAUSE 813.10 AND TABLE 8/4 OF N.R.A. SPECIFICATION FOR ROADWORKS (15 N/ mm
AFTER 7 DAYS)
G
2. ESB N APPROVED WELL COMPACTED NATURAL UNWASHED SAND TO BS 882 OR
EQUIVALENT MATERIAL APPROVED BY ESB NETWORKS. MAXIMUM THERMAL RESISTIVITY
OF THE SURROUND MATERIAL SHALL BE 1.0 K.m/W AT 0% MOISTURE CONTENT
International
Drawn
Produced
Verified
Approved
G.Ryan
G.Ryan
M.Amet
T.Sheridan
Client Ref
QUALITY
02/12/13
Size
Scale
A4
N.T.S.
ISO 9001: 2008
NSAI Certified
ESB International, Stephen Court, 18-21 St. Stephen’s Green
1 29/11/13
BACKFILL AND SURROUND MATERIALS REVISED
0 05/05/13
ISSUED FOR CONSTRUCTION
TC210096
GR
GR
TS
MA
Ver
App
Drawing Number
Dublin 2, Ireland. Tel: (0)1 703 8000 Fax: +353 (0)1 703 8088
Email: marketing@esbi.ie Web: www.esbi.ie
Rev
Date
Revision Description
Drn Prod
Purpose of issue - Preliminary unless indicated
Registered in Ireland No. 155249
Tender
Client Approval
Construction
X
As-built
-
SHEET
REV
PE424-D7002-008-001-001
ESB International is a trading name of ESBI Engineering & Facility Management Limited.
Registered Office: as above
No. of Shts
Approved date
Revised
Drawing Title
Client
NETWORKS
MV SINGLE CIRCUIT
Project
MV Standard Drawings
TRENCH CROSS SECTION
1 WAY DUCT FORMATION
Production Unit
Contract
MV CABLES STANDARDS
Civil Building and Environmental
Copyright ESB International Ltd All rights reserved. No part of this work may be modified or reproduced or copied in any form or by any means - graphic, electronic or mechanical,
including photocopying, recording, taping or information-and-retrieval system, or used for any purpose other than its designated purpose, without the written permission of ESB International Ltd.
A4 CAD
2
1
4
3
6
5
8
7
PERMANENT REINSTATEMENT TO COMPLY WITH
LOCAL AUTHORITY SPECIFICATION / DRAWING
FINISHED SURFACE LEVEL
300 MAX.
A
WARNING TAPE
1 X YELLOW MARKER WARNING
TAPE 500 mm WIDE
ESB CODE : 2955092
C
B
FOR BACKFILL DETAILS REFER
TO TABLE BELOW
1 X RED CABLE MARKER (20 m ROLL)
400 mm WIDE X 2.5 mm THICK
ESB CODE : 2955103
C
75
125 mm OD uPVC DUCT IN
ACCORDANCE WITH ESB CODE : 9317553
50
175
FOR DUCT SURROUND DETAILS REFER
TO TABLE BELOW
D
100
75
100
12 mm DIAMETER PULL ROPE
525
TRENCH LOCATION
MIN. DEPTH OF
COVER TO TOP
OF DUCTS (C)
TRENCH BACKFILL
DETAILS
DUCT SURROUND
MATERIAL
E
EXISTING FOOTPATH
(NON HOUSING ESTATE)
450 mm
CL 804
NEW ESTATE & NON ESTATE
FOOTPATH
600 mm
CL 804
ESB N APPROVED
SAND
NEW & EXISTING ESTATE
ROADS, ESTATE GRASS VERGES &
ADJOINING ROADS
600 mm
CL 804
ESB N APPROVED
SAND
SUITABLE
BACKFILL MATERIAL
600 mm
ESTATE OPEN GRASSED AREAS
F
NEW & EXISTING NON
ESTATE ROADS
FARM LAND, FOREST TRACK,
BOG LAND, PUBLIC OPEN GRASSED
AREAS & PRIVATE PROPERTY
ESB N APPROVED
SAND
CBGM B
750 mm
CL 804
ESB N APPROVED
SAND
750 mm
CL 804
CBGM B
NOTES:
1. RED CBGM B BACKFILL IN ACCORDANCE WITH CLAUSE 822 AND COMPACTED TO
2
CLAUSE 813.10 AND TABLE 8/4 OF N.R.A. SPECIFICATION FOR ROADWORKS (15 N/ mm
AFTER 7 DAYS)
G
2. ESB N APPROVED WELL COMPACTED NATURAL UNWASHED SAND TO BS 882 OR
EQUIVALENT MATERIAL APPROVED BY ESB NETWORKS. MAXIMUM THERMAL RESISTIVITY
OF THE SURROUND MATERIAL SHALL BE 1.0 K.m/W AT 0% MOISTURE CONTENT
International
Drawn
Produced
Verified
Approved
G.Ryan
G.Ryan
M.Amet
T.Sheridan
Client Ref
QUALITY
02/12/13
Size
Scale
A4
N.T.S.
ISO 9001: 2008
NSAI Certified
ESB International, Stephen Court, 18-21 St. Stephen’s Green
1 29/11/13
BACKFILL AND SURROUND MATERIALS REVISED
0 05/05/13
ISSUED FOR CONSTRUCTION
TC210096
GR
GR
TS
MA
Ver
App
Drawing Number
Dublin 2, Ireland. Tel: (0)1 703 8000 Fax: +353 (0)1 703 8088
Email: marketing@esbi.ie Web: www.esbi.ie
Rev
Date
Revision Description
Drn Prod
Purpose of issue - Preliminary unless indicated
Registered in Ireland No. 155249
Tender
Client Approval
Construction
X
As-built
-
SHEET
REV
PE424-D7002-008-002-001
ESB International is a trading name of ESBI Engineering & Facility Management Limited.
Registered Office: as above
No. of Shts
Approved date
Revised
Drawing Title
MV DOUBLE CIRCUIT
Project
Client
NETWORKS
MV Standard Drawings
TRENCH CROSS SECTION
2 WAY DUCT FORMATION
Production Unit
Contract
MV CABLES STANDARDS
Civil Building and Environmental
Copyright ESB International Ltd All rights reserved. No part of this work may be modified or reproduced or copied in any form or by any means - graphic, electronic or mechanical,
including photocopying, recording, taping or information-and-retrieval system, or used for any purpose other than its designated purpose, without the written permission of ESB International Ltd.
A4 CAD
2
1
4
3
6
5
8
7
PERMANENT REINSTATEMENT TO COMPLY WITH
LOCAL AUTHORITY SPECIFICATION / DRAWING
FINISHED SURFACE LEVEL
300 MAX.
A
FOR BACKFILL DETAILS REFER
TO TABLE BELOW
WARNING TAPE
1 X YELLOW MARKER WARNING
TAPE 500 mm WIDE
ESB CODE : 2955092
C
B
75
1 X RED CABLE MARKER (20 m ROLL)
400 mm WIDE X 2.5 mm THICK
ESB CODE : 2955103
C
375
75
125 mm OD uPVC DUCT IN
ACCORDANCE WITH ESB CODE : 9317553
50
FOR DUCT SURROUND DETAILS REFER
TO TABLE BELOW
D
100
75
100
12 mm DIAMETER PULL ROPE
525
TRENCH LOCATION
TRENCH BACKFILL
DETAILS
MIN. DEPTH OF
COVER TO TOP
OF DUCTS (C)
DUCT SURROUND
MATERIAL
E
EXISTING FOOTPATH
(NON HOUSING ESTATE)
450 mm
CL 804
NEW ESTATE & NON ESTATE
FOOTPATH
600 mm
CL 804
ESB N APPROVED
SAND
NEW & EXISTING ESTATE
ROADS, ESTATE GRASS VERGES &
ADJOINING ROADS
600 mm
CL 804
ESB N APPROVED
SAND
SUITABLE
BACKFILL MATERIAL
600 mm
ESTATE OPEN GRASSED AREAS
F
NEW & EXISTING NON
ESTATE ROADS
FARM LAND, FOREST TRACK,
BOG LAND, PUBLIC OPEN GRASSED
AREAS & PRIVATE PROPERTY
ESB N APPROVED
SAND
CBGM B
750 mm
CL 804
ESB N APPROVED
SAND
750 mm
CL 804
CBGM B
NOTES:
1. RED CBGM B BACKFILL IN ACCORDANCE WITH CLAUSE 822 AND COMPACTED TO
2
CLAUSE 813.10 AND TABLE 8/4 OF N.R.A. SPECIFICATION FOR ROADWORKS (15 N/ mm
AFTER 7 DAYS)
G
2. ESB N APPROVED WELL COMPACTED NATURAL UNWASHED SAND TO BS 882 OR
EQUIVALENT MATERIAL APPROVED BY ESB NETWORKS. MAXIMUM THERMAL RESISTIVITY
OF THE SURROUND MATERIAL SHALL BE 1.0 K.m/W AT 0% MOISTURE CONTENT
International
Drawn
Produced
Verified
Approved
G.Ryan
G.Ryan
M.Amet
T.Sheridan
Client Ref
QUALITY
02/12/13
Size
Scale
A4
N.T.S.
ISO 9001: 2008
NSAI Certified
ESB International, Stephen Court, 18-21 St. Stephen’s Green
1 29/11/13
BACKFILL AND SURROUND MATERIALS REVISED
0 05/05/13
ISSUED FOR CONSTRUCTION
TC210096
GR
GR
TS
MA
Ver
App
Email: marketing@esbi.ie Web: www.esbi.ie
-
Drawing Number
Dublin 2, Ireland. Tel: (0)1 703 8000 Fax: +353 (0)1 703 8088
Rev
Date
Revision Description
Drn Prod
Purpose of issue - Preliminary unless indicated
Registered in Ireland No. 155249
Tender
Client Approval
Construction
X
As-built
SHEET
REV
PE424-D7002-008-003-001
ESB International is a trading name of ESBI Engineering & Facility Management Limited.
Registered Office: as above
No. of Shts
Approved date
Revised
Drawing Title
Client
NETWORKS
MV CIRCUIT
Project
MV Standard Drawings
TRENCH CROSS SECTION
4 WAY DUCT FORMATION
Production Unit
Contract
MV CABLES STANDARDS
Civil Building and Environmental
Copyright ESB International Ltd All rights reserved. No part of this work may be modified or reproduced or copied in any form or by any means - graphic, electronic or mechanical,
including photocopying, recording, taping or information-and-retrieval system, or used for any purpose other than its designated purpose, without the written permission of ESB International Ltd.
A4 CAD
2
1
4
3
6
5
8
7
PERMANENT REINSTATEMENT TO COMPLY WITH
LOCAL AUTHORITY SPECIFICATION / DRAWING
FINISHED SURFACE LEVEL
300 MAX.
A
FOR BACKFILL DETAILS REFER
TO TABLE BELOW
WARNING TAPE
2 X YELLOW MARKER WARNING
TAPE 500 mm WIDE
ESB CODE : 2955092
C
B
75
2 X RED CABLE MARKER (20 m ROLL)
400 mm WIDE X 2.5 mm THICK
ESB CODE : 2955103
C
450
150
125 mm OD uPVC DUCT IN
ACCORDANCE WITH ESB CODE : 9317553
FOR DUCT SURROUND DETAILS REFER
TO TABLE BELOW
50
D
100
150
150
100
12 mm DIAMETER PULL ROPE
875
TRENCH LOCATION
MIN. DEPTH OF
COVER TO TOP
OF DUCTS (C)
E
F
TRENCH BACKFILL
DETAILS
DUCT SURROUND
MATERIAL
EXISTING FOOTPATH
(NON HOUSING ESTATE)
450 mm
CL 804
NEW ESTATE & NON ESTATE
FOOTPATH
600 mm
CL 804
ESB N APPROVED
SAND
NEW & EXISTING ESTATE
ROADS, ESTATE GRASS VERGES &
ADJOINING ROADS
600 mm
CL 804
ESB N APPROVED
SAND
SUITABLE
BACKFILL MATERIAL
600 mm
ESTATE OPEN GRASSED AREAS
NEW & EXISTING NON
ESTATE ROADS
FARM LAND, FOREST TRACK,
BOG LAND, PUBLIC OPEN GRASSED
AREAS & PRIVATE PROPERTY
ESB N APPROVED
SAND
CBGM B
750 mm
CL 804
ESB N APPROVED
SAND
750 mm
CL 804
CBGM B
NOTES:
G
1. RED CBGM B BACKFILL IN ACCORDANCE WITH CLAUSE 822 AND COMPACTED TO
2
CLAUSE 813.10 AND TABLE 8/4 OF N.R.A. SPECIFICATION FOR ROADWORKS (15 N/ mm
AFTER 7 DAYS)
2. ESB N APPROVED WELL COMPACTED NATURAL UNWASHED SAND TO BS 882 OR
EQUIVALENT MATERIAL APPROVED BY ESB NETWORKS. MAXIMUM THERMAL RESISTIVITY
OF THE SURROUND MATERIAL SHALL BE 1.0 K.m/W AT 0% MOISTURE CONTENT
International
Drawn
Produced
Verified
Approved
G.Ryan
G.Ryan
M.Amet
T.Sheridan
Client Ref
QUALITY
02/12/13
Size
Scale
A4
N.T.S.
ISO 9001: 2008
NSAI Certified
ESB International, Stephen Court, 18-21 St. Stephen’s Green
1 29/11/13
BACKFILL AND SURROUND MATERIALS REVISED
0 05/05/13
ISSUED FOR CONSTRUCTION
TC210096
GR
GR
TS
MA
Ver
App
Email: marketing@esbi.ie Web: www.esbi.ie
-
Drawing Number
Dublin 2, Ireland. Tel: (0)1 703 8000 Fax: +353 (0)1 703 8088
Rev
Date
Revision Description
Drn Prod
Purpose of issue - Preliminary unless indicated
Registered in Ireland No. 155249
Tender
Client Approval
Construction
X
As-built
SHEET
REV
PE424-D7002-008-004-001
ESB International is a trading name of ESBI Engineering & Facility Management Limited.
Registered Office: as above
No. of Shts
Approved date
Revised
Drawing Title
Client
NETWORKS
MV CIRCUIT
Project
MV Standard Drawings
TRENCH CROSS SECTION
6 WAY DUCT FORMATION
Production Unit
Contract
MV CABLES STANDARDS
Civil Building and Environmental
Copyright ESB International Ltd All rights reserved. No part of this work may be modified or reproduced or copied in any form or by any means - graphic, electronic or mechanical,
including photocopying, recording, taping or information-and-retrieval system, or used for any purpose other than its designated purpose, without the written permission of ESB International Ltd.
A4 CAD
2
1
4
3
6
5
8
7
PERMANENT REINSTATEMENT TO COMPLY WITH
LOCAL AUTHORITY SPECIFICATION / DRAWING
FINISHED SURFACE LEVEL
300 MAX.
A
FOR BACKFILL DETAILS REFER
TO TABLE BELOW
WARNING TAPE
2 X YELLOW MARKER WARNING
TAPE 500 mm WIDE
ESB CODE : 2955092
C
B
75
2 X RED CABLE MARKER (20 m ROLL)
400 mm WIDE X 2.5 mm THICK
ESB CODE : 2955103
C
150
125 mm OD uPVC DUCT IN
ACCORDANCE WITH ESB CODE : 9317553
725
FOR DUCT SURROUND DETAILS REFER
TO TABLE BELOW
12 mm DIAMETER PULL ROPE
D
150
NOTES:
50
1. RED CBGM B BACKFILL IN ACCORDANCE
WITH CLAUSE 822 AND COMPACTED TO
CLAUSE 813.10 AND TABLE 8/4 OF N.R.A.
2
SPECIFICATION FOR ROADWORKS (15 N/ mm
AFTER 7 DAYS)
E
100
150
150
100
2. ESB N APPROVED WELL COMPACTED
NATURAL UNWASHED SAND TO BS 882 OR
EQUIVALENT MATERIAL APPROVED BY ESB
NETWORKS. MAXIMUM THERMAL RESISTIVITY
OF THE SURROUND MATERIAL SHALL BE 1.0
K.m/W AT 0% MOISTURE CONTENT
875
TRENCH LOCATION
MIN. DEPTH OF
COVER TO TOP
OF DUCTS (C)
TRENCH BACKFILL
DETAILS
EXISTING FOOTPATH
(NON HOUSING ESTATE)
450 mm
CL 804
NEW ESTATE & NON ESTATE
FOOTPATH
600 mm
CL 804
ESB N APPROVED
SAND
NEW & EXISTING ESTATE
ROADS, ESTATE GRASS VERGES &
ADJOINING ROADS
600 mm
CL 804
ESB N APPROVED
SAND
ESB N APPROVED
SAND
F
NEW & EXISTING NON
ESTATE ROADS
FARM LAND, FOREST TRACK,
BOG LAND, PUBLIC OPEN GRASSED
AREAS & PRIVATE PROPERTY
International
SUITABLE
BACKFILL MATERIAL
600 mm
ESTATE OPEN GRASSED AREAS
G
CBGM B
750 mm
CL 804
ESB N APPROVED
SAND
750 mm
CL 804
CBGM B
Drawn
Produced
Verified
Approved
G.Ryan
G.Ryan
M.Amet
T.Sheridan
Client Ref
QUALITY
No. of Shts
Approved date
02/12/13
Size
Scale
A4
N.T.S.
ISO 9001: 2008
NSAI Certified
ESB International, Stephen Court, 18-21 St. Stephen’s Green
1 29/11/13
BACKFILL AND SURROUND MATERIALS REVISED
0 05/05/13
ISSUED FOR CONSTRUCTION
TC210096
GR
GR
TS
MA
Ver
App
Email: marketing@esbi.ie Web: www.esbi.ie
-
Drawing Number
Dublin 2, Ireland. Tel: (0)1 703 8000 Fax: +353 (0)1 703 8088
Rev
Date
Revision Description
Drn Prod
Purpose of issue - Preliminary unless indicated
Registered in Ireland No. 155249
Tender
Client Approval
Construction
X
As-built
SHEET
REV
PE424-D7002-008-005-001
ESB International is a trading name of ESBI Engineering & Facility Management Limited.
Registered Office: as above
DUCT SURROUND
MATERIAL
Revised
Drawing Title
Client
NETWORKS
MV CIRCUIT
Project
MV Standard Drawings
TRENCH CROSS SECTION
9 WAY DUCT FORMATION
Production Unit
Contract
MV CABLES STANDARDS
Civil Building and Environmental
Copyright ESB International Ltd All rights reserved. No part of this work may be modified or reproduced or copied in any form or by any means - graphic, electronic or mechanical,
including photocopying, recording, taping or information-and-retrieval system, or used for any purpose other than its designated purpose, without the written permission of ESB International Ltd.