REVISION
May 2000
Process Industry Practices
Piping
PIP PN01CJ1S01
Piping Material Specification 1CJ1S01
Class 150, 1-1/4 CR - 1/2 MO, 0.063" C.A.
Process
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
In an effort to minimize the cost of process industry facilities, this Practice has
been prepared from the technical requirements in the existing standards of major
industrial users, contractors, or standards organizations. By harmonizing these
technical requirements into a single set of Practices, administrative, application, and
engineering costs to both the purchaser and the manufacturer should be reduced. While
this Practice is expected to incorporate the majority of requirements of most users,
individual applications may involve requirements that will be appended to and take
precedence over this Practice. Determinations concerning fitness for purpose and
particular matters or application of the Practice to particular project or engineering
situations should not be made solely on information contained in these materials. The
use of trade names from time to time should not be viewed as an expression of
preference but rather recognized as normal usage in the trade. Other brands having the
same specifications are equally correct and may be substituted for those named. All
Practices or guidelines are intended to be consistent with applicable laws and
regulations including OSHA requirements. To the extent these Practices or guidelines
should conflict with OSHA or other applicable laws or regulations, such laws or
regulations must be followed. Consult an appropriate professional before applying or
acting on any material contained in or suggested by the Practice.
This Practice is subject to revision at any time by the responsible Function Team
and will be reviewed every 5 years. This Practice will be revised, reaffirmed, or
withdrawn. Information on whether this Practice has been revised may be found at
http://www.pipdocs.org.
© Process Industry Practices (PIP), Construction Industry Institute, The
University of Texas at Austin, 3208 Red River Street, Suite 300, Austin,
Texas 78705. PIP member companies and subscribers may copy this Practice
for their internal use.
PRINTING HISTORY
August 1996
February 1999
Issued as PIP PN01CJ1P
Revision
Not printed with State funds
June 1999
May 2000
Revision
Revision
REVISION
PIP PN01CJ1S01
Piping Material Specification Line Class 1CJ1S01
May 2000
SERVICE:
RATING CLASS:
TEMPERATURE LIMIT:
NOMINAL CORROSION ALLOWANCE:
PRESSURE - TEMPERATURE RATINGS
TEMP F
-20 to 100
200
TEMP C
-29 to 38
93
Process
150, ASME B16.5a-1998
-20F to 1000F
0.063 in. (0.05 in. MIN)
300
149
400
204
500
260
MATERIAL:
DESIGN CODE:
STRESS RELIEF:
EXAMINATION:
1-1/4 CR - 1/2 MO
ASME B31.3-1999
None Required
Per ASME B31.3
600
316
700
371
800
427
900
482
1000
538
140
965
110
760
80
550
50
345
20
140
For NPS 1/2 through NPS 24 (Full flange ratings per ASME B16.5, Table 2-1.9.)
psig
kPag
290
2000
ITEM
PIPE
NIPPLES
Branch
Swage (CONC)
Swage (ECC)
FITTINGS
Sockolet
Thredolet
SW Latrolet
SW Elbolet
90 ELL
45 ELL
Tee
Tee (RED)
Plug
Coupling
Coupling (RED)
Cap
Reducer (CONC)
Reducer (ECC)
Weldolet
90 LR ELL
45 LR ELL
Tee
Cap
VALVES
Gate
Gate
Gate
Gate
Globe
Globe
Lift Check
Dual PLT Check
Swing Check
FLANGES
Socket Weld
Socket Weld
Blind
Blind
Weld Neck
Weld Neck
Pair WN Orifice
260
1795
NOTES
01
230
1585
200
1380
170
1170
NPS
SCH/RAT
ENDS
DESCRIPTION
1/2 - 2
3 - 24
XS
STD
1-1/4 CR - 1/2 MO, SMLS, ASTM A335-P11 (Ej=1.00)
1-1/4 CR - 1/2 MO, SMLS, ASTM A335-P11 (Ej=1.00)
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2
XS
XS
XS
1-1/4 CR - 1/2 MO, SMLS, ASTM A335-P11 (Ej=1.00)
1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, MSS SP-95
1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, MSS SP-95
1/2 - 1-1/2
1/2 - 2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 2
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 1-1/2
2 - 24
2 - 24
2 - 24
2 - 24
2 - 24
2 - 24
2 - 24
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
Class 3000
03
02
03, 17
03
03
05
15
06
61
07, 26, 63
62
02
12
12
12
Process Industry Practices
Class 3000
Class 3000
Class 3000
Weld
Weld
Weld
Weld
SW
SW
SW
SW
THRD
SW
SW
SW
Weld
Weld
Weld
Weld
Weld
Weld
Weld
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, MSS SP-97
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, MSS SP-97
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, round head, ASME B16.11
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.11
1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S ASME B16.9
1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, MSS SP-97
1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9
1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9
1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9
1-1/4 CR - 1/2 MO, ASTM A234-WP11 CL1-S, ASME B16.9
1/2 - 2
1/2 - 2
1/2 - 2
3 - 24
1/2 - 2
3 - 12
1/2 - 2
3 - 24
3 - 24
Class 150
Class 800
Class 800
Class 150
Class 800
Class 150
Class 800
Class 150
Class 150
RF
SW
T/SW
RF
SW
RF
SW
RF
1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST
1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST
1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST
1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST, FP
1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST
1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST
1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST, piston
1-1/4 CR - 1/2 MO body w/ 410 SS disc, HF ST
1-1/4 CR - 1/2 MO body w/ 13 CR trim, HF ST
GA01CJ500
GA08CJ300
GA08CJ200
GA01CJ501
GL08CJ300
GL01CJ500
CL08CJ300
CD01CJ700
CS01CJ500
1/2 - 1-1/2
1/2 - 1-1/2
1/2 - 24
1/2 - 24
2 - 24
2 - 24
2 - 24
Class 150
Class 300
Class 150
Class 300
Class 150
Class 300
Class 300
RF
RF
RF
RF
RF
RF
RF
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.5
1-1/4 CR - 1/2 MO, ASTM A182-F11 CL2, ASME B16.36, SW taps
Page 1 of 2
REVISION
PIP PN01CJ1S01
Piping Material Specification Line Class 1CJ1S01
ITEM
GASKETS
NOTES
NPS
SCH/RAT
1/2 - 24
1/2 - 24
Class 150
Class 300
May 2000
ENDS
DESCRIPTION
Spiral wound type 304 SS w/ flexible graphite filler, ASME B16.20
Spiral wound type 304 SS w/ flexible graphite filler, ASME B16.20
BOLTING
Stud Bolts
ASTM A193, B16 stud w/ 2 heavy hex nuts ASTM A194, GR 4
BRANCH SIZE
90° BRANCH CONNECTION
Legend and Chart
E
P
S
T
W
05
06
07
12
15
17
26
61
62
63
T
P
P
P
P
P
P
P
P
W
W
W
S
S
S
S
24
T
P
P
P
P
P
P
P
W
W
W
S
S
S
S
20
T
P
P
P
P
P
P
W
W
W
S
S
S
S
18
T
P
P
P
P
P
W
W
W
S
S
S
S
16
T
P
P
P
P
W
W
W
S
S
S
S
14
T
P
P
P
W
W
W
S
S
S
S
12
T
P
P
W
W
W
S
S
S
S
10
T
P
T
W
W
W
W
W
W
S
S
S
S
S
S
S
S
8
6
HEADER SIZE
T
W
W
S
S
S
S
4
T
W
S
S
S
S
3
T
E
E
E
E
2
T
E
E
E
1-1/2
T
E
E
1
T
E
3/4
T
1/2
Reducing Tee
Branch Weld w/Reinforcing Pad (Pad thickness equals run pipe thickness. Pad width equals 1/2 branch OD.)
Sockolet
Tee
Weldolet (Note 05)
NOTES:
01
02
03
24
20
18
16
14
12
10
8
6
4
3
2
1-1/2
1
3/4
1/2
Where pipe schedule is shown under “SCH/RAT,” it is adequate for the full flange rating. Where “Calc” is shown, the pressure limit may be lower
than flange rating.
All butt-welded component thicknesses shall match pipe thickness.
Threaded joints are permitted only at outlet of vent and drain valves, at hydrostatic connections, at outlet of instrument take-off valves, and to match
equipment.
Integrally reinforced branch connections are permitted outside the sizes shown in the branch connection tables. Designer shall check weld thickness of
integrally reinforced branch connections to determine if PWHT is required.
These valves shall be used only for vent, drain, and instrument connections.
These valves have no flanges, but are installed between line flanges with extra length bolts.
To be used only to match Class 300 rated flange connections at control valves and special equipment.
To be used when mating to flanged nozzles.
Threaded outlet branch weld fittings to be used only for hydrostatic text connections.
To be used only when indicated on P&ID.
Install in horizontal position with cover up.
Install in horizontal position with cover up or in vertical position with upward flow.
Install in horizontal position with hinge pin vertical or in vertical position with upward flow.
REFERENCES:
Process Industry Practices (PIP)
PIP PNF0200 - Vents, Drains, and Instrument Connection Details
PIP PNSMV013 - Low and Intermediate Alloy Steel Gate Valve Descriptions
PIP PNSMV014 - Low and Intermediate Alloy Steel Globe Valve Descriptions
PIP PNSMV015 - Low and Intermediate Alloy Steel Check Valve Descriptions
Page 2 of 2
Process Industry Practices