TADLOCK PIPE
Rental Tool Division
P.O. Box 16990
Lake Charles, LA 70616
Lake Charles, LA Office
(337) 436-0426 • (800) 259-4046
FAX (337) 436-0276
Shreveport, LA Office
(318) 425-0318
FAX (318) 425-0338
TADLOCK PIPE
TADLOCK PIPE
We at Tadlock Pipe & Rentals, Inc., feel it is our responsibility
to provide you with the most modern equipment, maintained in the
best possible manner. We are able to offer you the largest and one
of the most modern inventories available in the industry. For your
protection, our pipe has been repaired, if necessary, inspected
and thoroughly tested before we send it to you.
We sincerely solicit your inquiries on tubulars not shown
in this catalog as we are continually adding to our inventories and
“If we don’t have it, We will get it”.
Thank you for your confidence in us and our tubulars. We
sincerely appreciate your business.
TADLOCK PIPE & RENTALS, INC.
TADLOCK PIPE
TADLOCK PIPE
TERMS AND CONDITIONS UNDER WHICH DRILL PIPE, TOOLS AND
OTHER EQUIPMENT ARE RENTED AND SOLD —
1. TERM OF AGREEMENT: The rental and term of this lease begins when
the item leaves the Lessor’s yard and the rental continues until the item is returned
thereto and accepted by an authorized Lessor.
2. RENTAL CHARGES: Lessee will pay lessor, and Lessor will accept as
payment from Lessee, as rental for leased items, the rental charges specified in
Lessor’s scheduled rental rates. All prices are subject to change without notice.
Lessee agrees to pay rent when due irrespective of any claims, demands, set-offs,
defenses, actions, suits or proceedings that it may have or assert against Lessor
or any supplier or manufacturer of any items.
Scheduled rental rates for drill pipe apply for workover or deepening job inside
casing only. Apply for rate when drill pipe is needed for drilling well top to bottom. If
it is necessary to subrent equipment from third parties at a higher rate, their rate will
be charged. Standby rates will be charged on individual tools at current rates.
3. TRANSPORTATION CHARGES: All transportation charges including freight,
rail or air express and drayage charges must be paid by the Lessee.
4. WELL CONDITIONS: Well conditions which prevent satisfactory operation
of the item do not relieve Lessee of responsibility for rental charges.
5. TERMS OF PAYMENT: All rental charges or other payments due are
to become due hereunder shall be due and payable in Lake Charles, Louisiana
Calcasieu Parish, on the 30th day following the date of the invoice. The maximum
legal rate of interest is applicable to unpaid invoices commencing 60 days after the
due dates thereof. If the invoiced amount is not paid when due and the account
is placed in the hands of an attorney for collection or if suit is filed to collect the
account or any part thereof, Lessee (or purchaser as the case may be) agrees
additionally to pay all costs and a reasonable sum as attorneys fees.
6. RETURN OF EQUIPMENT: Lessee warrants, upon acceptance of delivery
of any item, that it is in proper operating order and appearance and agrees to return
such equipment to the Lessor in as good condition as it was at the effective date
of the lease, ordinary wear and tear from a reasonable use thereof and damage by
public enemy alone excepted.
7. DAMAGED OR LOST EQUIPMENT: All items lost or damaged beyond
repair will be paid for by the Lessee at the current catalog price (replacement cost
new). Lessee shall have the option to secure and pay for all repairs necessary
to restore any damaged but repairable item to its original condition or to appoint
TADLOCK PIPE
Lessor agent for the sole purpose of securing the repairs necessary on behalf of
Lessee and to pay Lessor for said repairs in accordance with the Terms of Payment
set forth herein. Accrued rental charges cannot be applied against the purchase
price or cost of repairs of such damaged or lost equipment. Equipment billed as
a sale after having been damaged beyond repair will be held for the purchaser for
sixty (60) days and if unclaimed will be sold by Lessor.
8. DEFAULT: If Lessee breaches any of the terms of conditions hereof or
if Lessee becomes insolvent, bankrupt or his financial responsibility becomes
impaired, or if the equipment or any part of it be abused , illegally used or misused,
or whenever Lessor deems the rentals of equipment insecure, all rental charges and
/ or repair charges and / or other claims or indebtedness arising hereunder shall
at the option of Lessor and without legal process any premises where equipment
may be and take possession thereof without being liable to any suit or action or
proceeding by Lessee. Upon Lessor’s retaking possession of the said equipment
the rental agreement shall terminate but said termination shall be without prejudice
to any right or claim for arrears of rental, if any, or for damages.
9. EXCLUSION OF LIABILITY: All equipment is furnished and leased to Lessee
at Lessee’s sole risk and expense. Lessor assumes no liability of any type, nature
or degree, to any source for equipment leased to Lessee. Lessee shall be solely
responsible for damages, injuries, deaths, delays or losses or any kind or nature,
from any source, occasioned by or related to the use of said equipment, whether
used or operated by Lessee, its agents, employees, or subcontractors and their
employees or whether resulting from the acts or omissions of Lessor or any of its
agents, servants, employees, or otherwise.
10. INDEMNITY BY LESSEE: Lessee agrees to protect, indemnity and hold
harmless the Lessor, its officers, agents and employees, from every kind and
character of damages, losses, expenses, demands, claims and causes of action
arising in favor of Lessee, its officers, agents, employees or any other persons ,
firm or corporation whatsoever, on account of personal injuries, death claims or
damages to property arising from any cause whatsoever growing out of or incident
to such equipment rental whether such injuries, death or damage result from or are
claimed to have resulted from the concurrent or sole negligence of the Lessor, the
Lessee, or Lessee’s subcontractors, including the officers, agents or employees
of the above. Lessee at its own expense shall defend any suit or action brought
against the Lessor based on any such alleged injury, death or damage, and shall pay
all damages, cost and expenses, including attorney’s fees in connection therewith
or in any manner resulting therefrom.
11. EXAMINATION AND INSPECTION: Lessee agrees to afford Lessor access
to the leased equipment for the purposes of examination and inspection at all
reasonable times during the term hereof.
TADLOCK PIPE
12. DISCLAIMER: LESSOR MAKES NO REPRESENTATION OR WARRANTY
OF ANY KIND, EXPRESS OR IMPLIED, WITH RESPECT TO DRILL PIPE, TOOLS
OR OTHER EQUIPMENT: LESSEE UNDERSTANDS AND AGREES THAT NO
WARRANTY IS TO BE IMPLIED WITH RESPECT TO THE CONDITION OF THE
EQUIPMENT, ITS MERCHANTABILITY, THE FITNESS OF THE EQUIPMENT
FOR A PARTICULAR PURPOSE, OR WITH RESPECT TO INFRINGEMENT OR
THE LIKE THE LESSOR SHALL NOT IN ANY EVENT BE LIABLE FOR ANY
SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
NOTHING HEREIN CONTAINED SHALL BE CONSTRUED AS DEPRIVING THE
LESSEE OF WHATEVER RIGHTS, IF ANY, LESSEE MAY HAVE AGAINST THE
SUPPLIER OR MANUFACTURER OF THE EQUIPMENT.
A charge of 25% will be added to listed prices
when any rental item is ordered and treated
for H2S (Sour Gas) service.
TADLOCK PIPE
TADLOCK PIPE
TOOL JOINTS
THREAD DETAILS
API REGULAR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UNION TOOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . API FULL HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . API INTERNAL FLUSH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . API NUMBERED CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . AMERICAN PAC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AMERICAN OPEN HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CABLE TOOL JOINTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GULF TUBING JOINTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HYDRIL JOINTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HUGHES DOUBLE STREAMLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . HUGHES H-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HUGHES SLIM HOLE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HUGHES SLIMLINE H-90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HUGHES XTRA HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HUGHES EXTERNAL FLUSH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HUMBLE “X” TYPE JOINTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REED EXTERNAL FLUSH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REED DOUBLE STREAMLINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REED WIDE OPEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REED FULL HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REED XTRA HOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SUCKER ROD (INCLUDES STRENGTH DATA) . . . . . . . . . . . . . . . . . . SMALL DIAMETER TOOL JOINTS–
STRENGTH DATA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LARGE DIAMETER TOOL JOINTS–
STRENGTH DATA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MINIMUM/MAXIMUM TOOL JOINT DIMENSIONS . . . . . . . . . . . . . . . . . . . “X” SERIES DRILL ROD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . “W” SERIES DRILL ROD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1
2
3
4
5
6
7
8
9
10
11-12
13
14
15
16
17
18
19
20
20
21
22-23
24
25
26
27
28
TADLOCK PIPE
API REGULAR THREAD DIMENSIONS
SIZE
A
B
C
D
E
F
G
H
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
TPI
TPF
1-1/4
2-5/8
2-3/16
1-23/32
1-5/16
1-3/4
3
5/8
7
2
2-3/8
3
3-1/8
2-5/8
1-7/8
2-11/16
3-3/8
1
5
3
2-7/8
3-1/2
3-3/4
3
2-1/8
3-1/16
3-7/8
1-1/4
5
3
3-1/2
3-3/4
4-1/4
3-1/2
1-9/16
3-9/16
4-1/8
1-1/2
5
3
4-1/2
4-1/4
5-1/2
4-5/8
3-9/16
4-11/16
4-5/8
2-1/4
5
3
5-1/2
4-3/4
6-3/4
5-33/64
4-21/64
5-37/64
5-1/8
2-3/4
4
3
6-5/8
5
7-3/4
6
5-5/32
6-1/16
5-3/8
3-1/2
4
2
7-5/8
5-1/4
8-7/8
7
5-11/16
7-3/32
5-5/8
4
4
3
8-5/8
5-3/8
10
7-61/64
6-37/64
8-3/64
5-3/4
4-3/4
4
3
SIZE
NOTES
1-1/4
NON-API
4-1/2
* 5-3/4 OPTIONAL O.D.
6-5/8
THREADED PORTION SAME AS 5-1/2 UNION TOOL FULL-HOLE
7-5/8
OBSOLETE API CONNECTION
8-5/8
OBSOLETE API CONNECTION
UNION TOOL REGULAR
(OBSOLETE CONNECTIONS)
SIZE
A
B
C
D
E
F
G
H
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
TPI
TPF
3
3-3/4
4-1/4
3-1/4
2-5/16
3-5/16
4-1/8
1-1/2
5
3
4
4-1/4
5-3/4
4-1/2
3-51/64
4-9/16
4-5/8
2-1/4
5
2
5
4-5/8
6-3/4
5-33/64
4-21/64
5-37/64
5-1/8
2-3/4
4
3
6
5
7-3/4
6
5-5/32
6-1/16
5-3/8
3-1/2
4
2
1-1
TADLOCK PIPE
API FULL HOLE
SIZE
A
B
C
D
E
F
G
H
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
2-7/8
3-1/2
4-1/4
3-5/8
2-3/4
3-11/16
3-9/16
2-1/8
5
3
3-1/2
3-3/4
4-5/8
4
3-1/16
4-3/64
4-3/8
2-2/8 †
5
3
4
4-1/2
5-1/4
4-9/32
3-17/32
4-11/32
5-1/8
2-13/16
4*
2
4-1/2
4
5-3/4
4-51/64
3-51/64
4-7/8
4-5/8
3
5
3
5-1/2
5
7
5-53/64
5
5-29/32
5-5/8
4
4
2
6-5/8
5
8
6-3/4
5-59/64
6-27/32
5-5/8
5
4
2
SIZE
2-7/8
3-1/2
4
NOTES
NOT API STANDARD
† ID CHANGED FROM 2-7/16, MAY 1979 (API)
THREADED PORTION AND THREAD FORM SAME AS 4-1/2 REED DOUBLE
STREAMLINE AND NC40.
* THREAD FORM SAME AS API I.F. JOINT
1-2
TADLOCK PIPE
API INTERNAL FLUSH
SIZE
A
B
C
D
E
F
G
H
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
2-3/8
3
3-3/8
2-7/8
2-3/8
2-15/16
3-5/8
1-3/4
4
2
2-7/8
3-1/2
4-1/8
3-25/64
2-13/16
3-29/64
4-1/8
2-1/8
4
2
3-1/2
4
4-3/4
4-1/64
3-11/32
4-5/64
4-5/8
2-11/16
4
2
4
4-1/2
5-3/4
4-53/64
4-5/64
4-29/32
5-1/8
3-1/4
4
2
4-1/2
4-1/2
6-3/8
5-1/4
4-1/2
5-5/16
5-1/8
3-3/4
4
2
5-1/2
5
7-3/8
6-25/64
5-9/16
6-29/64
5-5/8
4-13/16
4
2
SIZE
NOTES
2-3/8
THREADED PORTION SAME AS 2-7/8 HUGHES SLIM HOLE
2-7/8
THREADED PORTION SAME AS 3-1/2 HUGHES SLIM HOLE
3-1/2
THREADED PORTION SAME AS 4-1/2 HUGHES SLIM HOLE
4
THREADED PORTION SAME AS 4-1/2 HUGHES XTRA HOLE, 5” REED DOUBLE
STREAMLINE, 4-1/2 REED XTRA HOLE AND NC46
4-1/2
THREADED PORTION SAME AS 5-1/2 REED DOUBLE STREAMLINE, 5” HUGHES
XTRA HOLE, 5 REED XTRA HOLE AND NC50
5-1/2
OBOSLETE API CONNECTION
1-3
TADLOCK PIPE
API NUMBERED CONNECTIONS
O.D.’S AND I.D.’S LISTED DENOTE API STANDARD FOR
DRILL PIPE CONNECTIONS
A
B
C
D
E
F
G
H
K
SIZE
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
NC23
3
3-1/8
2.563
2.063
2-5/8
3-5/8
1-1/4
4
2
NC26
3
3-3/8
2.876
2.376
2-15/16
3-5/8
1-3/4
4
2
NC31
3-1/2
4-1/8
3.391
2.808
3-29/64
4-1/8
2-1/8
4
2
NC35
3-3/4
4-3/4
3.739
3.114
3-13/16
4-3/8
2-1/4
4
2
NC38
4
4-3/4
4.016
3.349
4-5/64
4-5/8
2-11/16
4
2
NC40
4-1/2
5-1/4
4.280
3.530
4-11/32
5-1/8
2-13/16
4
2
NC44
4-1/2
5-3/4
4.625
3.875
4-11/16
5-1/8
3-1/8
4
2
NC46
4-1/2
6
4.834
4.084
4-29/32
5-1/8
3-1/4
4
2
NC50
4-1/2
6-3/8
5.250
4.500
5-5/16
5-1/8
3-3/4
4
2
NC56
5
7
5.876
4.626
5-15/16
5-5/8
3-3/4
4
3
NC61
5-1/2
8
6.438
5.063
6-1/2
6-1/8
4
4
3
NC70
6
9-1/4
7.313
5.813
7-3/8
6-5/8
4-1/2
4
3
NC77
6-1/2
10-3/4
8.000
6.376
8-1/16
7-1/8
4-3/4
4
3
SIZE
NOTES
NC23
DIMENSIONS TENTATIVE
NC26
INTERCHANGEABLE WITH 2-3/8 API I.F.
NC31
INTERCHANGEABLE WITH 2-7/8 API I.F.
NC38
INTERCHANGEABLE WITH 3-1/2 API I.F.
NC40
INTERCHANGEABLE WITH 4 API F.H.
NC46
INTERCHANGEABLE WITH 4 API I.F.
NC50
INTERCHANGEABLE WITH 4-1/2 API I.F.
NC77
DIMENSIONS TENTATIVE
1-4
TADLOCK PIPE
AMERICAN P.A.C.
A
B
C
D
E
F
G
H
J
K
SIZE
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
2-3/8
2-3/8
2-7/8
2-23/64
2-1/16
2-27/64
2-1/2
1-3/8
4
2-5/16
1-1/2
2-7/8
2-3/8
3-1/8
2-17/32
2-15/64
2-19/32
2-1/2
1-1/2
4
2-31/64
1-1/2
3-1/2
3-1/4
3-3/4
3-3/64
2-41/64
3-7/64
3-3/8
2
4
3
1-1/2
1-5
TADLOCK PIPE
AMERICAN OPEN HOLE
SIZE
A
B
C
D
E
F
G
H
J
K
Y
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
(IN.)
2-3/8
2-3/8
3-1/4
2-3/4
2-29/64
2-13/16
2-1/2
1-13/16
4
2-45/64
1-1/2
3/8
2-7/8
2-7/8
3-7/8
3-9/64
2-25/32
3-7/32
3
2.151
4
3-7/64
1-1/2
3/8
3-1/2
3-1/4
4-3/4
3-57/64
3-31/64
3-61/64
3-3/8
2-11/16
4
3-27/32
1-1/2
5/8
4
4
5-1/2
4-37/64
4-5/64
4-41/64
4-1/8
3-1/4
4
4-17/32
1-1/2
5/8
SIZE
A
B
C
D
E
F
G
H
J
K
Y
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
(IN.)
2-3/8
2-3/8
3-1/8
2-3/4
2-29/64
2-13/16
2-1/2
1.995
4
2-45/64
1-1/2
3/8
2-7/8
2-1/2
3-3/4
3-9/64
2-53/64
3-7/32
3
2.441
4
3-7/64
1-1/2
3/8
3-1/2
3-1/4
4-1/2
3-57/64
3-31/64
3-61/64
3-3/8
2.992
4
3-27/32
1-1/2
5/8
4
3-1/2
5-1/4
4-37/64
4-9/64
4-41/64
4-1/8
3.476
4
4-17/32
1-1/2
5/8
4-1/2
3-3/4
5-3/4
4-59/64
4-29/64
4-63/64
3-7/8
3.958
4
4-7/8
1-1/2
5/8
AMERICAN OPEN HOLE LIGHTWEIGHT AND TUBING
1-6
TADLOCK PIPE
CABLE TOOL JOINTS
A
B
C
D
H
K
U
X
SIZE
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
(IN.)
(IN.)
7/8 X 1-1/4-10
2-1/4
1-7/8
1-5/16
15/16
10
2
3
1-15/16
7/8 X 1-1/2-10
2-5/8
2-1/4
1-19/32
27/32
10
3-7/16
3-3/8
2-3/8
1 X 1-1/2-8
2
2
1-31/64
61/64
8
3
2-3/4
2-1/16
1-1/8 X 1-3/4-8
2-1/2
2-1/2
1-47/64
1-7/64
8
3
3-1/4
2-5/8
1-1/8 X 1-3/4-8
2-1/2
2-1/2
1-49/64
1-7/32
8
2-5/8
3-1/4
2-5/8
1-1/2 X 2-1/4-8
3
3-1/8
2-15/64
1-31/64
8
3
3-3/4
3-1/4
1-5/8 X 2-1/2-8
3-1/2
3-1/2
2-1/2
1-5/8
8
3
4-1/4
3-5/8
1-5/8 X 2-5/8-7
3-1/2
3-5/8
2-43/64
1-51/64
7
3
4-1/4
3-3/4
1-3/4 X 2-3/4-8
3-1/2
3-3/4
2-3/4
1-3/4
8
3-7/16
4-1/4
3-7/8
2 X 3-7
4
4-1/4
3-7/64
2-7/64
7
3
4-3/4
4-3/8
2 X 3-7
4
4-1/4
3-1/16
2
7
3-3/16
4-3/4
4-3/8
2-1/4 X 3-1/4-7
4
4-1/2
3-5/16
2-17/64
7
3-1/8
4-3/4
4-3/4
2-1/4 X 3-1/4-7
4
4-1/2
3-9/32
2-9/32
7
3
4-3/4
4-3/4
2-1/2 X 3-1/2-7
4-1/4
5
3-37/64
2-33/64
7
3
5
5-1/4
2-3/4 X 3-3/4-7
4-1/2
5-1/4
3-13/16
2-11/16
7
3
5-1/4
5-1/2
3 X 4-7
4-3/4
6
4
2-13/16
7
3
5-1/2
6-1/4
3 X 4-7
4-3/4
6
4
2-47/64
7
3-3/16
5-1/2
6-1/4
3-1/4 X 4-1/4-7
5
6-1/4
4-19/64
3-3/64
7
3
5-3/4
6-1/2
3-1/2 X 4-1/2-7
5-1/2
6-1/2
4-21/32
3-9/32
7
3
6-1/4
6-3/4
4 X 5-7
5-1/2
7
5-1/16
3-11/16
7
3
6-1/4
7-3/8
4 X 5-7
5
7
5-1/16
3-13/16
7
3
5-3/4
7-3/8
4 X 5-1/2-7
6-1/2
7-1/2
5-1/2
3-7/8
7
3
7-1/4
7-7/8
4-1/4 X 6-7
7
8-1/4
6
4-1/4
7
3
7-3/4
8-5/8
1-7
TADLOCK PIPE
GULF TUBING TOOL JOINTS
SIZE
A-200
2-3/8
A-250
2-7/8
A-300
3
A
B
C
D
E
F
G
H
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
2-3/8
3.060
2.720
2.423
2.739
2-3/4
1.995
4
1-1/2
2-3/8
3.668
3.294
2.997
3.314
2-3/4
2.441
4
1-1/2
2-3/4
4.500
3.978
3.634
4.000
3
2.992
4
1-1/2
1-8
TADLOCK PIPE
HYDRIL JOINTS
TYPE
IF
F
EIU
WT.
A
B
C
D
E
G
H
K
U
SIZE
LBS/FT
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
(IN.)
2-3/8
6.65
3-15/16
3-3/8
2-13/16
2-21/64
2-13/16
1-3/4
3
1/2
3-59/64
2-7/8
10.4
3-57/64
3-7/8
3-3/16
2-45/64
3-3/16
2-7/64
3
1/2
3-59/64
2-7/8
11.8
3-57/64
3-7/8
3-3/16
2-45/64
3-3/16
2
3
1/2
3-59/64
3-1/2
13.3
3-61/64
4-1/2
3-27/32
3-23/64
3-27/32
2-3/4
3
1/2
3-31/32
3-1/2
15.5
3-61/64
4-1/2
3-27/32
3-23/64
3-27/32
2-9/16
3
1/2
3-31/32
4-1/2
16.6
4
6
5-13/64
4-35/64
5-7/32
3-3/4
3
1/2
4-1/64
4-1/2
20.0
4
6
5-13/64
4-35/64
5-7/32
3-3/4
3
1/2
4-1/64
*5
20.5
4-23/32
6-5/8
5-25/32
5-1/64
5-51/64
4-3/16
2
1/2
4-3/4
2-3/8
6.65
2-5/8
2-3/8
1-59/64
1-43/64
1-15/16
1
4
1/2
2-15/32
2-7/8
10.4
3-21/32
2-7/8
2-23/64
1-29/32
2-3/8
1-1/16
4
1/2
3-1/2
3-1/2
13.3
4-1/16
3-1/2
2-13/16
2-21/64
2-13/16
1-1/2
3
1/2
3-59/64
4
14.0
3-59/64
4-1/16
3-5/16
2-55/64
3-11/32
2
3
1/2
3-29/32
4-1/2
16.6
3-61/64
4-1/2
3-27/32
3-23/64
3-27/32
2-3/16
3
1/2
3-31/32
*5
19.5
4-5/16
5
4-3/16
3-35/64
4-13/64
2-5/16
3
1/2
4
5-1/2
21.9
4-1/4
5-9/16
4-21/32
4-1/64
4-43/64
2-3/4
3
1/2
4-1/32
*6-5/8
25.2
5-5/16
6-5/8
5-11/16
4-29/32
5-45/64
3-1/2
2
1/2
5-1/8
3-1/2
13.3
4-1/4
4-5/8
3-47/64
3-17/64
3-3/4
2-7/16
3
1/2
4
4
14.0
4-5/16
5-9/16
4-21/64
4-1/64
4-43/64
3-1/8
3
1/2
4-1/32
4-1/2
20.0
4-7/16
5-3/4
4-47/64
4-3/32
4-3/4
3-5/32
3
1/2
4-1/8
5-1/2
21.9
5-1/2
7
5-53/64
5-1/16
5-27/32
4
2
1/2
5-1/8
*6-5/8
25.2
5-1/2
8
6-7/8
6-7/64
6-57/64
5
2
1/2
5-1/8
*OBSOLETE HYDRIL CONNECTION
1-9
TADLOCK PIPE
HUGHES DOUBLE STREAMLINE
SIZE
A
B
C
D
E
F
G
H
J
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F
3-1/2
3-7/8
3-7/8
3-21/64
2-11/16
3-23/64
4-1/4
1-13/16
4
3-15/64
2
4
4
4-1/2
3-57/64
3-7/32
3-59/64
4-3/8
2-3/8
4
3-51/64
2
4-1/2
4-1/2
5
4-9/32
3-17/32
4-5/16
4-7/8
2-11/16
4
4-3/16
2
SIZE
NOTES
3-1/2
THREADED PORTION SAME AS 2-7/8 HUGHES XTRA HOLE AND
3-1/2 REED DOUBLE STREAMLINE
4
4-1/2
THREADED PORTION SAME AS 4” REED DOUBLE STREAMLINE
THREADED PORTION SAME AS 4-1/2” REED DOUBLE STREAMLINE
1-10
TADLOCK PIPE
HUGHES H-90
SIZE
A
(IN.)
3-1/2
3-7/8
4
4-1/8
4-1/2
4-3/8
5
4-5/8
5-1/2
4-5/8
B
(IN.)
5
5-1/8
5-1/4
5-2/8
5-1/2
5-1/2
5-5/8
5-3/4
5-7/8
6
6
6-1/8
6-1/4
6-3/8
6-1/2
6-1/2
6-5/8
6-3/4
6-7/8
7
6-3/4
6-7/8
7
7-1/8
7-1/4
7-3/8
7-1/2
C
(IN.)
D
(IN.)
E
(IN.)
F
(IN.)
4-1/8
3-31/64
4-3/16
4-7/16
4-1/2
3-13/16
4-9/16
4-11/16
4-53/64
4-7/64
4-57/64
4-15/16
5-7/64
4-21/64
5-11/64
5-3/16
5-3/8
4-39/64
5-7/16
5-3/16
1-11
G
(IN.)
2-5/8 – 2-3/4
2-1/2 – 2-3/4
2 – 2-5/8
2 – 2-1/4
2 – 2-1/8
2-7/8 – 3
2-1/2 – 2-7/8
2-1/4 – 2-7/8
2 – 2-3/4
2 – 2-1/2
3 – 3-1/4
2-3/4 – 3
2-1/2 – 3
2–3
2 – 2-3/4
2-7/8 – 3-1/4
2-1/2 – 3
2-1/4 – 3
2-1/4 – 2-3/4
2-1/2
3-1/8 – 3-3/8
3 – 3-1/4
2-3/4 – 3-1/4
2-1/4 – 3-1/4
2-1/4 – 3
2-1/4 – 2-3/4
2-1/4 – 2-1/2
H
T.P.I.
J
(IN.)
K
T.P.F
3-1/2
3-15/16
2
3-1/2
4-5/16
2
3-1/2
4-41/64
2
3-1/2
4-59/64
2
3-1/2
5-3/16
2
L
(IN.)
4-13/16
4-13/16
5
5
5
5-5/16
5-5/16
5-1/2
5-1/2
5-1/2
5-3/4
5-3/4
6
6
6
6-1/8
6-1/8
6-3/8
6-3/8
6-3/8
6-3/8
6-5/8
6-5/8
6-5/8
6-5/8
6-5/8
6-5/8
TADLOCK PIPE
HUGHES H-90 (CONTINUED)
SIZE
6-5/8
7
7-5/8
8-5/8
A
(IN.)
4-7/8
5-3/8
6
6-1/2
B
(IN.)
7-5/8
7-3/4
7-7/8
8
8-1/8
8-1/4
8-1/4
8-3/8
8-1/2
8-5/8
8-3/4
9
9-1/2
9-5/8
9-3/4
9-7/8
10
10-1/4
10-3/4
11
11-1/4
11-1/2
C
(IN.)
D
(IN.)
E
(IN.)
F
(IN.)
6
5-3/16
6-1/16
6-11/16
6-1/2
5-5/32
7-1/8
5-15/16
7-25/64
5-57/64
8
6-9/16
8-17/64
6-41/64
9-3/8
7-1/16
1-12
G
(IN.)
3-3/8 – 3-5/8
3-1/4 – 3-1/2
3 – 3-1/2
2-1/2 – 3-1/2
2-1/2 – 3-1/4
2-1/2 – 3
3-1/2 – 3-3/4
2-3/4 – 3-3/4
2-3/4 – 3-3/4
2-3/4 – 3-1/2
2-3/4 – 3-1/4
2-3/4 – 3
3-1/2 – 4
3–4
3–4
3–4
3 – 3-3/4
3 – 3-1/4
3-1/2 – 4
3–4
3–4
3 – 3-1/4
H
T.P.I.
J
(IN.)
K
T.P.F.
3-1/2
5-12/16
2
3-1/2
6-3/8
3
3-1/2
7-17/64
3
3-1/2
8-9/64
3
L
(IN.)
7-1/4
7-1/2
7-1/2
7-1/2
7-1/2
7-1/2
8
8
8-1/4
8-1/4
8-1/4
8-5/8
9-1/4
9-1/4
9-1/4
9-5/8
9-5/8
9-5/8
10-1/2
10-1/2
10-3/4
10-3/4
TADLOCK PIPE
HUGHES SLIM HOLE
A
B
C
D
E
F
G
H
K
SIZE
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
2-3/8
2-7/8
2-7/8
2-7/16
1-31/32
2-1/2
3-1/4
1-13/64
4
2
2-7/8
2-7/8
3-3/8
2-7/8
2-25/64
2-15/16
3-1/4
1-3/4
4
2
3-1/2
3-3/8
4-1/8
3-25/64
2-53/64
3-29/64
3-3/4
2-1/8
4
2
4
3-3/8
4-5/8
3-13/16
3-1/4
3-7/8
3-3/4
2-7/16
4
2
4-1/2
3-7/8
5
4-1/64
3-3/8
4-5/64
4-1/4
2-11/16
4
2
SIZE
NOTES
2-3/8
OBSOLETE CONNECTION.
2-7/8
THREADED PORTION SAME AS2-3/8 API I.F. (NC26)
3-1/2
THREADED PORTION SAME AS2-7/8 API I.F. (NC37)
4
THREADED PORTION SAME AS 3-1/2 HUGHES XTRA HOLE,
3-1/2 REED XTRA HOLE, 4-1/2 HUGHES EXTERNAL FLUSH,
4-1/2 REED EXTERNAL FLUSH
4-1/2
THREADED PORTION SAME AS 3-1/2 API I.F. (NC38)
1-13
TADLOCK PIPE
HUGHES SLIMLINE H-90
SIZE
A
(IN.)
2-3/8
2-3/4
2-7/8
3-1/2
2-7/8
3-1/8
B
(IN.)
3-1/8
3-1/4
3-3/4
3-7/8
4
4
4-1/8
4-1/4
4-5/8
4-3/4
4-7/8
4-7/8
5
5-1/8
C
(IN.)
D
(IN.)
E
(IN.)
F
(IN.)
2.725
2.439
2-49/64
3-1/16
3.196
2.897
3-15/64
3-3/8
G
(IN.)
1-1/2
2-1/8
2-1/8
2-1/8
2-1/4
2-1/4
2-1/4
H
T.P.I.
J
(IN.)
K
T.P.F.
3
2-43/64
1-1/4
3
3-5/32
1-1/4
3
3-25/32
1-1/4
2
1-3/4
1-1/2
2-3/8
2-1/2
3.835
3.509
3-7/8
3-3/8
2
1-3/4
2-3/4
2-3/4
2-5/8
2-3/8
2
1-3/4
1-14
2-1/2
2-3/8
2-1/8
L
(IN.)
3-1/16
3-3/16
3-5/8
3-23/32
3-13/16
3-13/16
3-29/32
4
4-7/16
4-17/32
4-5/8
4-5/8
4-23/32
4-13/16
M
(IN.)
N
(IN.)
2-1/4
2-5/8
2-45/64
3-3/32
3-11/32
3-47/64
TADLOCK PIPE
HUGHES XTRA HOLE
SIZE
A
B
C
D
E
F
G
H
J
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
2-7/8
3-7/8
4-1/4
3-21/64
2-11/16
3-23/64
4-1/2
1-7/8
4
3-15/64
2
3-1/2
3-3/8
4-3/4
3-13/16
3-1/4
3-7/8
3-15/16
2-1/8
4
-
2
4-1/2
4-3/8
6-1/4
4-53/64
4-7/64
4-29/32
4-15/16
3-1/4
4
-
2
5
4-1/2
6-3/8
5-1/4
4-1/2
5-5/16
4-7/8
3-3/4
4
-
2
SIZE
2-7/8
NOTES
THREADED PORTION SAME AS 3-1/2 REED DOUBLE STREAMLINE, 2-7/8 REED
XTRA HOLE AND 3-1/2 HUGHES DOUBLE STREAMLINE
3-1/2
THREADED PORTION SAME AS 4-1/2 HUGHES EXTERNAL FLUSH, 4-1/2 API F.H.
REED EXTERNAL FLUSH, 4 HUGHES SLIM HOLE, 3-1/2 REED XTRA HOLE
4-1/2
THREADED PORTION SAME AS 4 API I.F. (NC46), 5 REED DOUBLE STREAMLINE,
4-1/2 REED XTRA HOLE
5
THREADED PORTION SAME AS 4-1/2 API I.F. (NC50), 5-1/2 REED DOUBLE
STREAMLINE, 5 REED XTRA HOLE
1-15
TADLOCK PIPE
HUGHES EXTERNAL FLUSH
A
B
C
D
E
F
G
H
J
K
SIZE
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
2-3/8
2-3/8
2-1/2
2-7/64
1-23/32
2-1/16*
3-1/4
1
6
2-1/64
2
2-7/8
2-5/8
3
2-1/2
2-1/16
2-17/32
3
1-1/16
6
-
2
3-1/2
3-1/4
3-5/8
3
2-29/64
3-1/32
4
1-1/2
4
-
2
3-1/2
3-1/4
3-11/16
3
2-29/64
3-1/32
4
1-1/2
4
-
2
4-1/2
3-3/8
4-11/16
3-13/16
3-1/4
3-7/8
4-1/4
2-3/16
4
-
2
4-1/2
3-3/8
4-17/32
3-13/16
3-1/4
3-7/8
4-1/4
2-3/16
4
-
2
SIZE
NOTES
2-3/8
SAME AS 2-3/8 HOMCO (EXTERNAL FLUSH) “LITTLE INCH”
3-1/2
THREADED PORTIONS SAME AS 3-1/2 FH REED EXTERNAL FLUSH
4-1/2
THREADED PORTIONS SAME AS 4-1/2 FH REED EXTERNAL FLUSH,
3-1/2 HUGHES XTRA HOLE, 4 HUGHES SLIM HOLE, 3-1/2 REED XTRA HOLE
*STRAIGHT COUNTERBORE
1-16
TADLOCK PIPE
HUMBLE “X” TYPE JOINT
SIZE
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
X-1247
4-1/2
4-3/4
3-57/64
3-9/64
3-15/16
4-5/8
2
4
3-1/2
2
2-3/8
5-1/8
3-7/64
5/8
7/64
X-1248
5
5-1/4
4-1/64
3-3/16
4-5/64
5
2
4
3-11/16
2
2-3/8
5-5/8
3-15/64
5/8
1/8
X-1249
5
6-1/8
4-53/64
4
4-7/8
5-1/8
2-3/4
4
4-1/2
2
3-1/4
5-5/8
4-1/32
1/2
1/8
X-1250
5-1/4
6-3/4
5-1/4
4-3/8
5-5/16
5-3/8
2-3/4
4
4-7/8
2
3-1/2
5-7/8
4-3/8
1/2
1/8
X-1251
6
8
6
5
6-1/16
6-1/8
2-3/4
4
5-9/16
2
4
6-5/8
5
1/2
1/8
SIZE
X-1247
NOTES
INTERCHANGEABLE WITH 4” REED DOUBLE STREAMLINE. PIN IS 1/2” LONGER THAN STANDARD. REFER TO REED DOUBLE STREAMLINE
FOR THREAD PROFILE.
X-1248
INTERCHANGEABLE WITH 3-1/2” API I.F. PIN IS 1” LONGER THAN STANDARD.REFER TO API I.F. FOR THREAD PROFILE.
X-1249
INTERCHANGEABLE WITH 5” REED DOUBLE STREAMLINE. PIN IS 1/2” LONGER THAN STANDARD.REFER TO REED DOUBLE STREAMLINE
FOR THREAD PROFILE.
X-1250
R X-1251
INTERCHANGEABLE WITH 4-1/2 API I.F. PIN IS 3/4” LONGER THAN STANDARD. REFER TO API I.F. FOR THREAD PROFILE.
INTERCHANGEABLE WITH 6-5/8 API REG. PIN IS 1” LONGER THAN STANDARD. REFER TO API REG. FOR THREAD PROFILE.
1-17
TADLOCK PIPE
.250
REED EXTERNAL FLUSH
A
B
C
D
E
F
G
H
J
K
Y
SIZE
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
(IN.)
2-3/8 REG.
2-5/8
2-3/8
2
1-9/16
*1-15/16
3
7/8
4
1-57/64
2
1/2
2-3/8 F.H.
2-5/8
2-1/2
2-1/8
1-11/16
*2-1/16
3
1
4
2-1/64
2
1/2
2-7/8 F.H.
3
3
2-13/32
1-29/32
*2-3/8
3-3/8
1-1/4
4
2-5/16
2
1/2
3-1/2 F.H.
3-1/4
3-5/8
3
2-29/64
3-1/32
4
1-1/2
4
--
2
21/32
4-1/2 F.H.
3-3/8
4-11/16
3-13/16
3-1/4
3-7/8
4-1/4
2-3/16
4
--
2
21/32
SIZE
NOTES
3-1/2 F.H.
THREAD SAME AS 3-1/2 HUGHES EXTERNAL FLUSH
4-1/2 F.H.
THREAD SAME AS 4-1/2 HUGHES EXTERNAL FLUSH- 4 HUGHES SLIM HOLE
3-1/2 HUGHESXTRA HOLE - 3-1/2 REED XTRA HOLE
* STRAIGHT COUNTERBORE
1-18
TADLOCK PIPE
REED DOUBLE STREAMLINE
A
B
C
D
E
F
G
H
J
K
SIZE
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
2-7/8
3-1/2
3-1/4
2-45/64
2-1/8
*2-5/8
3-7/8
1-1/4
4
2-19/32
2
3-1/2
4
3-7/8
3-21/64
2-21/32
*3-1/4
4-3/8
1-13/16
4
3-15/64
2
4
4
4-1/2
3-57/64
3-7/32
*3-27/32
4-3/8
2-3/8
4
3-51/64
2
4-1/2
4-1/2
5
4-9/32
3-17/32
*4-1/4
4-7/8
2-11/16
4
4-13/64
2
5
4-1/2
5-9/16
4-53/64
4-5/64
4-55/64
4-7/8
3-3/8
4
4-3/4
2
5-1/2
4-1/2
6-1/8
5-1/4
4-1/2
5-5/16
4-7/8
3-3/4
4
5-3/16
2
SIZE
3-1/2
4
4-1/2
NOTES
THREAD SAME AS 3-1/2 HUGHES DOUBLE STREAMLINE, 2-7/8 HUGHES & REED XTRA HOLE
THREAD SAME AS 4 HUGHES DOUBLE STREAMLINE
THREAD SAME AS 4-1/2 HUGHES DOUBLE STREAMLINE
5
THREAD SAME AS 4 API I.F. (NC46) - 4-1/2 HUGHES X-HOLE - 4-1/2 REED XTRA HOLE
5-1/2
THREAD SAME AS 4-1/2 API I.F. (NC50) - 5 HUGHES XTRA HOLE - 5 REED XTRA HOLE
* STRAIGHT COUNTERBORE
1-19
TADLOCK PIPE
REED WIDE OPEN (W.O.) TOOL JOINTS
A
B
C
D
E
F
G
H
K
SIZE
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
2-3/8
2-3/8
3-3/8
2-13/16
2-27/64
2-55/64
2-7/16
2
4
2
2-7/8
3
4-1/8
3-21/64
2-53/64
3-3/8
3-1/16
2-7/16
4
2
3-1/2
3-1/2
4-3/4
4-1/64
3-7/16
4-5/64
4-1/16
3
4
2
4
4-1/2
5-3/4
4-53/64
4-3/32
4-29/32
4-9/16
3-7/16
4
2
4-1/2
4-1/2
6-1/8
5-1/4
4-1/2
5-5/16
4-9/16
3-7/8
4
2
SIZE
3-1/2
4
NOTES
THREAD SAME AS 3-1/2 API I.F. (NC38) - 4-1/2 SLIM HOLE
THREAD SAME AS 4 API I.F. (NC46) - 4-1/2 EXTRA HOLE
DOUBLE E STREAMLINE - 4-1/2 M.O.
4-1/2
THREAD SAME AS 4-1/2 API I.F. (NC50) 5 EXTRA HOLE
5-1/2 DOUBLE STREAMLINE - 5 M.O.
REED FULL HOLE
A
B
C
D
E
F
G
H
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
T.P.F.
2-3/8
3
3-3/8
2-25/32
2-1/32
2-27/32
3-3/8
1-7/16
5
3
2-7/8
3-1/2
4
3-11/32
2-15/32
3-13/32
3-7/8
1-7/8
5
3
SIZE
1-20
TADLOCK PIPE
REED XTRA HOLE
A
B
C
D
E
F
G
H
J
K
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
T.P.I.
(IN.)
T.P.F.
2-7/8
4
4-1/4
3-21/64
2-5/8
3-23/64
4
1-7/8
4
3-15/64
2
3-1/2
3-1/2
4-3/4
3-13/16
3-15/64
3-7/8
3-7/8
2-7/16
4
3-45/64
2
4-1/2
4-1/2
6
4-53/64
4-5/64
4-57/64
4-7/8
3-1/4
4
4-23/32
2
5
4-1/2
6-3/8
5-1/4
4-1/2
5-5/16
4-7/8
3-3/4
4
5-9/64
2
SIZE
SIZE
NOTES
2-7/8
THREAD SAME AS 3-1/2 REED DOUBLE STREAMLINE
3-1/2
THREAD SAME AS 3-1/2 HUGHES XTRA HOLE, 4 HUGHES SLIM HOLE,
4-1/2 HUGHES EXTERNAL FLUSH, 4-1/2 F.H. REED EXTERNAL FLUSH
4-1/2
THREAD SAME AS 4 API I.F. (NC46), 4-1/2 HUGHES XTRA HOLE,
5 REED DOUBLE STREAMLINE
5
THREAD SAME AS 4-1/2 API I.F. (NC50), 5 HUGHES XTRA HOLE,
5-1/2 REED DOUBLE STREAMLINE
1-21
TADLOCK PIPE
SUCKER ROD COUPLINGS
FULL-SIZE AND SUBCOUPLING
SIZE
SLIMHOLE AND SUBCOUPLING
O.D.
LENGTH
WRENCH
FLAT DIST.
USED WITH MIN.
O.D.
LENGTH
USED WITH MIN.
E
L
LENGTH
BETWEEN
TUBING SIZE O.D.
C
L
TUBING SIZE O.D.
(IN.)
(IN.)
R (IN.)
S (IN.)
(IN.)
(IN.)
(IN.)
(IN.)
1/2
---
---
---
---
---
1
2-3/4
1.660
5/8
1-1/2
4
1-1/4
1-3/8
2-1/16
1-1/4
4
1.990
3/4
1-5/8
4
1-1/4
1-1/2
2-3/8
1-1/2
4
2-1/16
7/8
1-13/16
4
1-1/4
1-5/8
2-7/8
1-5/8
4
2-3/8
1
2-3/16
4
1-1/2
1-7/8
3-1/2
2
4
2-7/8
1-1/8
2-3/8
4-1/2
1-5/8
2-1/8
3-1/2
---
---
---
SUCKER ROD STRENGTH TABLE
DATA REPRINTED FROM API SPEC 11B, APRIL 1974
ROD SIZE - INCHES
1/2
5/8
3/4
7/8
1
ROD AREA - SQUARE INCHES
.196
.306
.442
.601
.785
J&L TYPE 7 WITH ULTIMATE TENSILE
YIELD
13,700
21,400
30,900
42,100
55,000
STRENGTH OF 86,000 PSI & YIELD
ULTIMATE
16,800
26,300
38,000
51,700
67,500
OF 70,000 PSI
TORQUE*
70
140
171
381
570
YIELD
--
19,900
28,700
39,100
51,000
78,500
J&L TYPE 2 WITH ULTIMATE
TENSILE STRENGTH OF 100,000 PSI
ULTIMATE
--
30,600
44,200
60,100
& YIELD OF 65,000 PSI.
TORQUE*
65
130
159
353
530
YIELD
--
20,900
30,300
41,200
53,800
78,500
J&L TYPE 1 WITH ULTIMATE
TENSILE STRENGTH OF 100,000 PSI
ULTIMATE
--
30,600
44,200
60,100
& YIELD OF 68,500 PSI
TORQUE*
68-1/2
136
168
372
560
YIELD
--
29,400
42,300
57,700
75,300
J&L TYPE 12 WITH ULTIMATE
TENSILE STRENGTH OF 120,000 PSI
ULTIMATE
--
37,700
53,000
72,000
94,200
& YIELD OF 96,000 PSI.
TORQUE*
96
192
235
476
783
* TORQUE (FT.-LBS) BASED ON ROD O.D. AT YIELD
1-22
TADLOCK PIPE
SUCKER ROD CONNECTIONS
†
SIZE
A (IN.)
B (IN.)
C (IN.)
D (IN.)
E (IN.)
F (IN.)
H (IN.)
M (IN.)
U (IN.)
W (IN.)
1/2
1.125
1.000
.750
3/4
.767
1.29
10
.642
1-5/8
5/8
5/8
1.250
1.250†
.936
1-1/4
.955
1.41
10
.830
1-3/4
7/8
3/4
1.437
1.500
1.061
1-1/4
1.080
1.60
10
.955
1-15/16
1
7/8
1.625
1.625
1.186
1-1/4
1.205
1.79
10
1.080
2-1/8
1
1
1.875
2.000
1.374
1-1/2
1.393
2.07
10
1.267
2-1/2
1-5/16
1-1/8
2.125
2.250
1.561†
1-5/8
1.580
2.31
10
1.455
2-3/4
1-1/2
THIS IS THE DIMENSION FOR PIN-BY-PIN SUCKER RODS; THE DIMENSION FOR BOX AND PIN SUCKER RODS IS 1.375.
1-23
TADLOCK PIPE
SMALL DIAMETER TOOL JOINTS
DIMENSION AND STRENGTH* DATA
JOINT
O.D.
I.D.
TENSION
TORSION
RECOMMENDED
(INCHES)
(INCHES)
YIELD
YIELD
MAKE-UP
STRENGTH
STRENGTH
TORQUE
(POUNDS)
(FOOT-POUNDS)
(FOOT-POUNDS)
1 AM. M.T.
1-9/16
3/4
68,100
765
500
1 AM. M.T.
1-9/16
13/16
58,080
650
450
1 AM. M.T.-DSI
1-9/16
3/4
68,100
1,300
500
1-1/4 AM. M.T.
1-3/4
1.000
69,698
865
500
1-1/4 AM. M.T.
1-3/4
7/8
93,984
1,265
650
1-1/4 AM. M.T.
1-3/4
13/16
104,808
1,265
650
1-1/4 AM. M.T.
1-3/4
3/4
115,000
1,265
650
1-1/4 F.J. (REG.)
2-3/16
5/8
155,300
2,150
1,075
1-1/4 AM. M.T.-DSI
1-3/4
7/8
93,984
1,800
650
1-1/2 AM. M.T.
2
1.000
127,100
1,770
950
1-1/2 AM. M.T.
2
1-5/32
92,136
1,285
700
1-1/2 AM. M.T.
2
1-1/8
99,528
1,385
750
1-1/2 AM. M.T.
2
1-1/16
113,784
1,585
900
1-1/2 AM. M.T.-DSI
2
1.000
127,100
2,800
950
1-9/16 HOMCO SLIMLINE
1-9/16
.937
71,120
900
450
1-5/8 BAASH ROSS
1.660
3/4
89,375
1,050
525
1-13/16 HOMCO SLIMLINE
1-13/16
1.000
111,000
900
450
1-13/16 HOMCO F.J.
1-13/16
3/4
113,000
1,600
800
1-13/16 PRT
1-13/16
3/4
110,700
1,595
800
1-13/16 WILSON F.J.
1-13/16
3/4
113,000
1,600
800
2-1/16 AM. M.T.-DSI
2.330
1-1/4
135,036
3,500
1,100
2-1/4 PRT
2-1/4
3/4
181,900
4,600
2,300
2-1/4 T.S.S.
2-1/4
1.000
142,500
2,100
500
2-3/8 AM. PAC
2-7/8
1-3/8
238,440
4,800
2,400
2-3/8 AM. PAC DSI†
2-7/8
1-1/2
201,900
6,490
3,250
2-3/8 API REG. DSI†
3-1/8
1
375,500
8,045
4,020
2-3/8 HOMCO F.J.
2-1/2
1.000
203,100
3,350
1,670
2-3/8 WILSON F.J.
2-1/2
1-1/16
138,000
4,490
2,250
2-7/8 AM. O.H.
3-7/8
2.151
345,360
8,900
4,450
2-7/8 AM. O.H.
3-3/4
2.441
223,680
5,700
2,850
2-7/8 AM. PAC
-LIGHTWEIGHT
3-1/8
1-1/2
269,470
5,800
2,900
2-7/8 AM. PAC DSI†
3-1/8
1-1/2
269,470
7,290
3,650
3-1/8 PRT
3-1/8
1.000
323,000
12,285
6,140
3-1/2 AM. PAC
3-3/4
2.000
352,800
8,800
4,400
4-1/4 PRT
4-1/4
2.000
507,600
26,500
13,250
* STRENGTHS BASED ON A MATERIAL YIELD OF 120,000 PSI. CHECK APPLICABLE PIPE FOR COMPARATIVE VALUES IN TENSION AND TORSION.
† DOUBLE SHOULDER INTERNAL
1-24
TADLOCK PIPE
LARGE DIAMETER TOOL JOINTS
DIMENSION AND STRENGTH DATA
API AND NON-API
SIZE
2-3/8
CONNECTION
BOX O.D.
PIN I.D.
TENSILE YIELD
TORSION YIELD
TYPE
(INCHES)
(INCHES)
STRENGTH
STRENGTH
RECOMMENDEDMAKE-UP
TORQUE
(POUNDS)
(POUNDS)
(FOOT-POUNDS)
API REG.
3-1/8
1
375,500
7,500
3,700
API I.F.
3-3/8
1-3/4
313,680
6,800
3,400
API REG.
3-3/4
1-1/4
493,600
13,000
6,500
API I.F.
4-1/8
2-1/8
447,130
11,800
5,900
HUGHES S.H.
3-3/8
1-3/4
313,680
6,800
3,400
HUGHES X-HOLE
4-1/4
1-7/8
505,080
13,400
6,700
API REG.
4-1/4
1-1/2
727,400
15,100
7,500
API F.H.
4-5/8
2-1/8
779,900
16,300
8,100
API I.F.
4-3/4
2-11/16
587,310
18,100
9,100
HUGHES D.S.L.
3-7/8
1-13/16
561,120
14,000
7,000
HUGHES S.H.
4-1/8
2-1/8
447,130
11,800
6,000
HUGHES X-HOLE
4-3/4
2-7/16
570,940
17,100
8,550
HUGHES H-90
5
2-3/4
663,130
23,500
11,800
HUGHES H-90
5-1/4
2-3/4
663,130
23,800
11,800
API F.H.
5-1/4
2-13/16
757,500
23,500
11,800
API I.F.
6
3-1/4
901,170
33,600
16,900
HUGHES S.H.
4-5/8
2-9/16
512,040
15,000
7,500
HUGHES H-90
5-1/2
2-13/16
913,470
35,400
17,700
API REG.
5-1/2
2-1/4
1,262,000
30,000
15,000
API F.H.
5-3/4
3
1,017,000
35,400
17,700
API I.F.
6-3/8
3-3/4
944,000
37,800
18,900
HUGHES X-HOLE
6-1/4
3-1/4
901,150
34,000
17,000
HUGHES H-90
6
3-1/4
938,150
38,900
19,500
HUGHES H-90
6
3
1,085,410
45,200
22,600
5
HUGHES X-HOLE
6-3/8
3-3/4
939,100
37,700
18,900
5-1/2
API REG.
6-3/4
2-3/4
1,779,000
61,000
30,000
API F.H.
7
4
1,265,760
56,300
28,000
API I.F.
7-3/8
4-13/16
1,265,500
45,000
23,500
API REG.
7-3/4
3-1/2
1,867,000
58,000
29,000
API F.H.
8
5
1,448,800
50,000
25,000
2-7/8
3-1/2
4
4-1/2
6-5/8
1-25
TADLOCK PIPE
RECOMMENDED MAXIMUM AND MINIMUM
TOOL JOINT DIMENSIONS
NOM O.D.
NOM I.D.
A
B
SIZE
TYPE
(IN.)
(IN.)
MAXIMUM
MAXIMUM
MINIMUM
MAXIMUM
2-3/8
API REG.
3-1/8
1
1-1/8
1-5/8
2-15/16
3-1/4
API I.F.
3-3/8
1-3/4
1-3/4
2
3-3/16
3-5/8
HYDRIL I.F.
3-3/8
1-3/4
1-3/4
1-7/8
3-1/8
3-5/8
API REG.
3-3/4
1-1/4
1-3/8
1-7/8
3-1/2
4
F.H.
4-1/4
2-1/8
2-1/8
2-3/8
4-1/16
4-5/8
JOINTS
2-7/8
C
API I.F.
4-1/8
2-1/8
2-1/8
2-1/2
3-7/8
4-3/8
HYDRIL I.F.
3-7/8
2-1/8
2-3/16
2-3/16
3-5/8
4-1/8
HUGHES XTRA HOLE
4-1/4
1-7/8
1-7/8
2-1/8
4
4-5/8
3
UNION TOOL
4-1/4
1-1/2
1-1/2
2-1/8
3-3/4
4-1/2
3-1/2
API REG.
4-1/4
1-1/2
1-3/4
2-1/4
4
4-5/8
API F.H.
4-5/8
2-1/8
2-7/16
2-3/4
4-1/2
5
API I.F.
4-3/4
2-11/16
2-11/16
3
4-1/2
5
HYDRIL I.F.
4-1/2
2-3/4
2-3/4
2-13/16
4-3/8
4-7/8
HUGHES XTRA HOLE
4-3/4
2-7/16
2-7/16
2-3/4
4-1/2
5
API F.H.
5-1/4
2-13/16
2-13/16
3-1/4
5
5-3/8
4
4-1/2
5-1/2
API I.F.
5-3/4
3-1/4
3-5/16
3-1/2
5-1/2
6
UNION TOOL
5-3/4
2-1/4
2-7/8
3-1/2
5-3/8
6
API REG.
5-3/4
2-1/4
2-5/8
3-1/4
5-3/8
6
API F.H.
5-3/4
3
3-5/32
3-1/2
5-1/2
6
API I.F.
6-3/8
3-3/4
3-3/4
4-1/8
5-7/8
6-1/2
HYDRIL I.F.
6
3-3/4
3-7/8
4
5-13/16
6-1/4
HUGHES XTRA HOLE
6-1/4
3-1/4
3-1/4
3-3/8
5-5/8
6-1/4
API REG.
6-3/4
2-3/4
3-1/4
3-7/8
6-3/8
7
API F.H.
7
4
4
4-1/2
6-1/2
7-1/4
API I.F.
7-3/8
4-13/16
4-13/16
5-1/4
7-1/8
7-7/8
API REG.
7-3/4
3-1/2
4
4-3/4
7-1/8
7-7/8
API F.H.
8
5
5
5-1/2
7-1/2
8-1/4
API I.F.
8-1/2
5-29/32
5-29/32
6-1/4
8-3/8
9
7-5/8
API REG.
8-7/8
4
4-1/4
5-1/4
8-1/8
9
8-5/8
API REG.
10
4-3/4
5-1/4
6-1/4
9
10-1/8
6-5/8
1-26
TADLOCK PIPE
“X” SERIES DRILL ROD
SYMBOL
A
B
E ROD (3 THD)
1.50
A ROD (3 THD)
B ROD (5THD)
C
D
E
F
G
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
1.312
.999
.997
.874
.870
1.003
1.001
.878
.876
1.625
1.75
1.625
1.264
1.262
1.139
1.134
1.268
1.266
1.143
1.141
1.875
1.87
1.906
1.405
1.403
1.280
1.275
1.409
1.407
1.284
1.282
2.000
N ROD (4 THD)
2.37
2.375
1.874
1.872
1.686
1.681
1.878
1.876
1.690
1.688
2.500
N ROD (3 THD)
2.37
2.375
1.874
1.872
1.688
1.681
1.878
1.876
1.690
1.688
2.500
“X” SERIES DRILL ROD
SYMBOL
H
J
K
L
E ROD (3 THD)
1.437
.25
.437
A ROD (3 THD)
1.687
.25
B ROD (5 THD)
1.812
.26
N ROD (4 THD)
2.312
N ROD (3 THD)
2.312
M (BOX)
M (PIN)
N (BOX)
N (PIN)
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
.843
.1680
.1617
.1657
.1617
.1608
.1544
.1608
.1563
.562
1.265
.1680
.1617
.1657
.1617
.1608
.1544
.1608
.1563
.625
1.406
.1014
.0950
.0990
.0950
.0941
.0877
.0941
.0897
.31
1.000
2.000
.1236
.1173
.1212
.1173
.1163
.1099
.1164
.1120
.31
1.000
2.000
.1653
.1590
.1653
.1590
.1581
.1517
.1581
.1517
1-27
TADLOCK PIPE
“W” SERIES DRILL ROD
SYMBOL
A
B
EW ROD (3 THD)
1.562
AW ROD (3 THD)
BW ROD (3 THD)
NW ROD (3 THD)
C
D
E
F
MAX
MIN
MAX
MIN
MAX
MIN
MAX
MIN
1.375
1.062
1.060
.937
.932
1.066
1.064
.941
.939
1.875
1.750
1.374
1.372
1.249
1.244
1.378
1.376
1.253
1.251
2.250
2.125
1.684
1.682
1.527
1.522
1.688
1.686
1.531
1.529
2.750
2.625
2.218
2.216
2.030
2.025
2.222
2.220
2.034
2.032
“W” SERIES DRILL ROD
SYMBOL
G
H
J
K
L
EW ROD (3THD)
1.562
1.437
.312
.437
AW ROD (3 THD)
1.875
1.750
.375
BW ROD (3 THD)
2.250
2.125
.375
NW ROD (3 THD)
2.750
2.625
.375
1-28
M (BOX)
M (PIN)
MAX
MIN
MAX
MIN
1.062
.1680
.1617
.1657
.1617
.525
1.437
.1680
.1617
.1657
.1617
.750
1.812
.1665
.1604
.1641
.1604
1.375
2.312
.1651
.1590
.1627
.1590
TADLOCK PIPE
NOTES
TADLOCK PIPE
DRILL PIPE
API DRILL PIPE REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DIMENSIONAL DATA AND PERFORMANCE
PROPERTIES OF GRADES D, E, X-95,
G-105 AND S-135. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MECHANICAL PROPERTIES OF NEW
TOOL JOINTS AND NEW GRADE E
DRILL PIPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MECHANICAL PROPERTIES OF NEW
TOOL JOINTS AND NEW HIGH
STRENGTH DRILL PIPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DRILCO HEVI-WATE DRILL PIPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MILL SLOT & GROOVE METHOD OF DRILL
STRING IDENTIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DRILL PIPE FLOATS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2-4
5-6
7-8
9
10
11
TADLOCK PIPE
API DRILL PIPE REQUIREMENTS
DRIFT TEST
DRILL PIPE SIZE
DRIFT MANDREL LENGTH
DRIFT MANDREL DIAMETER
ALL EU (EXCEPT 3-12” 13.3#)
4"
I.D. MINUS 3/16"
TENSILE REQUIREMENTS
GRADE
TENSILE STRENGTH
YIELD STRENGTH
MIN PSI
MAX PSI
D
55000
-----
95000
E
75000
105000
100000
MINIMUM PSI
X-95
95000
125000
105000
G-105
105000
135000
115000
S-135
135000
165000
145000
RANGE LENGTHS
RANGE 1
RANGE 2
(FT.)
(FT.)
(FT.)
18–22
27–30
38–45
2
--
--
PERMISSIBLE LENGTH, MIN.
20
--
--
PERMISSIBLE VARIATION, MAX.
--
2
3
--
27
38
TOTAL RANGE LENGTH, INCL
PERMISSIBLE VARIATION, MAX.
RANGE 3
RANGE LENGTH FOR 95% OR MORE OF CARLOAD:
RANGE LENGTH FOR 90% OR MORE OF CARLOAD
PERMISSIBLE LENGTH, MAX.
TOLERANCES
DRILL PIPE SIZE
DIMENSION
TOLERANCE
1.050–3.500
4.000–5.000
+3/32" – 1/32"
O.D.*
+7/64" – .75% O.D.
5.500–8.625
+1/8" – .75% O.D.
WALL THICKNESS
– 12.5%
ALL
I.D.
GOVERNED BY O.D. TOLERANCES
SIZES
ECCENTRICITY: O.D.
.093" MAX. (TOTAL INDICATOR READING)
ECCENTRICITY: I.D.
1/16" (1/8” TOTAL INDICAOR READING)
OVALITY (ON UPSET)
.093" MAXIMUM
*MEASUREMENTS MADE IMMEDIATELY BEHIND THE UPSET FOR A DISTANCE OF APPROXIMATELY 5 INCHES FOR SIZES 5-1/2" O.D. AND SMALLER, AND A DISTANCE
APPROXIMATELY EQUAL TO THE O.D. FOR SIZES LARGER THAN 5-1/2".
2-1
TADLOCK PIPE
NEW DRILL PIPE
DIMENSIONAL DATA AND PERFORMANCE PROPERTIES
WEIGHT
LBS/FI
O.D.
(IN.)
T&C
4.85
SECTION
TORSIONAL
WALL
AREA BODY
YIELD
YIELD
COLLAPSE
BURST
STRENGTH
STRENGTH†
PRESSURE
PRESSURE
(PSI)
PLAIN
I.D.
THICKNESS
OF PIPE
END
(IN.)
(IN.)
(SQ. IN.)
4.43
1.995
.190
6.65
6.85
6.26
6.16
1.815
2.441
.280
.217
9.50
9.72
8.81
2.151
2.992
.362
.254
12.31
2.764
.368
(LBS)
(PSI)
3490
71730
8100
E
4760
97820
11040
10500
X-95
6030
123900
13980
13300
G-105
6670
136940
15460
14700
S-135
8570
176070
19070
18900
D
4580
101360
11440
11350
E
6250
138220
15600
15470
X-95
7920
175080
19760
19600
G-105
8750
193500
21840
21660
S-135
11250
248790
28080
27850
D
5930
99660
7660
E
8080
135900
10470
9910
X-95
10240
172140
12930
12550
G-105
11320
190260
14010
13870
S-135
14550
244620
17060
17830
D
8470
157180
12110
12120
E
11550
214340
16510
16530
X-95
14640
271500
20910
20930
G-105
16180
300080
23110
23140
S-135
20800
385820
29720
29750
D
10370
142460
7400
1.8120
2.8579
E
14150
194270
10040
9520
X-95
17920
246070
12080
12070
G-105
19800
271970
13050
13340
S-135
25460
349680
15780
17150
D
13600
199150
10350
10120
E
18550
271570
14110
13800
X-95
23500
343990
17880
17480
G-105
25970
380190
19760
19320
S-135
33390
488820
25400
24840
2.5902
3-1/2
13.30
(FT/LBS)
D
1.8429
2-7/8
10.40
GRADE
1.3042
2-3/8
TENSILE
3.6209
*THESE SIZES/WEIGHTS NOT INCLUDED IN API SPECIFICATION 5A AND 5AX
†TENSION STRENGTH FOR THE CONNECTION EXCEEDS THAT OF THE PIPE. USE PIPE STRENGTH AS GUIDE.
2-2
TADLOCK PIPE
NEW DRILL PIPE
DIMENSIONAL DATA AND PERFORMANCE PROPERTIES
WEIGHT
LBS/FT
TORSIONAL
O.D.
(IN.)
T&C
15.50
WALL
SECTION AREA
YIELD
TENSILE YIELD
COLLAPSE
BURST
STRENGTH
STRENGTH
PRESSURE
PRESSURE
PLAIN
I.D.
THICKNESS
BODY OF PIPE
END
(IN.)
(IN.)
(SQ.IN.)
14.63
2.602
.449
14.00
10.46
12.93
3.476
3.340
.262
.330
13.75
14.69
12.24
3.240
3.958
.380
.271
14.98
3.826
.337
(PSI)
(PSI)
236700
12300
12350
E
21090
322780
16770
16840
X-95
26710
408850
21250
21330
G-105
29520
451890
23480
23570
S-135
37950
581000
30190
30310
D
14280
169220
6590
E
19470
230750
8410
8600
X-95
24670
292290
9960
10890
G-105
27260
323050
10700
12040
S-135
35050
415350
12650
15480
D
17080
209260
8330
7940
E
23290
285360
11350
10830
3.8048
X-95
29500
361460
14380
13720
G-105
32600
399500
15900
15150
S-135
41920
513650
20170
19490
D
18930
237690
9460
9140
E
25810
324120
12900
12470
4.3216
X-95
32690
410550
16340
15790
G-105
36130
453770
18050
17460
S-135
46460
583420
23210
22440
D
19000
198020
5720
E
25910
270030
7200
7900
X-95
32820
342040
8400
10010
G-105
36270
378040
8950
11070
S-135
46630
486050
10310
14230
D
22590
242410
7620
7210
E
30810
330560
10390
9830
X-95
39020
418700
12750
12450
G-105
43130
462780
13820
13760
S-135
55450
595000
16800
17690
3.6004
4-1/2
16.60
(LBS)
15460
3.0767
4
15.70
(FT/LBS)
D
4.3037
3-1/2
11.85
GRADE
4.4074
*THESE SIZES/WEIGHTS NOT INCLUDED IN API SPECIFICATION 5A AND 5AX.
†TENSION STRENGTH FOR THE CONNECTION EXCEEDS THAT OF THE PIPE. USE PIPE STRENGTH AS GUIDE.
2-3
TADLOCK PIPE
NEW DRILL PIPE
DIMENSIONAL DATA AND PERFORMANCE PROPERTIES
WEIGHT
LBS/FT
SECTION
O.D.
(IN.)
4-1/2
T&C
20.00
16.25
5
19.50
25.60
19.20
5-1/2
21.90
24.70
6-5/8
25.20
TORSIONAL
WALL
AREA
YIELD
TENSILE YIELD
COLLAPSE
BURST
STRENGTH
STRENGTH
PRESSURE
PRESSURE
PLAIN
I.D.
THICKNESS
BODY OF PIPE
END
(IN.)
(IN.)
(SQ.IN.)
18.69
14.87
17.93
24.03
16.87
19.81
22.54
22.19
3.640
4.408
4.276
4.000
4.892
4.778
4.670
5.965
.430
.296
.362
.500
.304
.361
.415
.330
GRADE
(FT/LBS)
(LBS)
(PSI)
(PSI)
D
27060
302400
9510
9200
E
36900
412360
12960
12540
X-95
46740
522320
16420
15890
G-105
51660
577300
18150
17560
S-135
68420
742240
23330
22580
D
25700
204590
5560
5.4981
E
35040
328070
6970
X-95
44390
415560
8090
9840
G-105
49060
459300
8610
10880
S-135
63080
590530
9860
13990
D
30190
290100
7390
6970
E
41170
395600
10000
9500
X-95
52140
501090
12010
12040
G-105
57600
553830
12890
13300
S-135
74100
712070
15770
17110
D
38320
388770
9900
9620
E
52260
530150
13500
13120
4.3743
5.2746
7.0686
7770
X-95
66190
671520
17100
16620
G-105
73160
742200
18900
18380
S-135
94060
954260
24300
23620
D
32320
272930
4910
E
44070
372180
6070
X-95
55830
471430
6930
9190
G-105
61700
521050
7300
10160
S-135
79330
669920
8120
13060
D
37190
320550
6510
6320
E
50710
437120
8440
8610
X-95
64230
553680
10000
10910
G-105
70990
611960
10740
12060
S-135
91280
786810
12710
15510
D
41490
364630
7670
7260
E
56570
497220
10460
9900
X-95
71660
829810
12920
12540
G-105
79200
696110
14000
13860
S-135
101830
895000
17050
17830
D
51760
358940
4010
4790
E
70580
489470
4810
6540
X-95
89400
619990
5310
8280
G-105
98810
685250
5490
9150
S-135
127050
881040
6040
11770
4.9624
5.8282
6.6296
6.5262
*THESE SIZES/WEIGHTS NOT INCLUDED IN API SPECIFICATION 5A AND 5AX.
†TENSION STRENGTH FOR THE CONNECTION EXCEEDS THAT OF THE PIPE. USE PIPE STRENGTH AS GUIDE.
2-4
7250
TADLOCK PIPE
MECHANICAL PROPERTIES OF NEW TOOL JOINTS
AND NEW GRADE E DRILL PIPE
DRILL PIPE DATA
TOOL JOINT DATA
WEIGHT
O.D.
(IN.)
(LBS/FT)
NOM.
WT.
4.85
2-3/8
6.65
6.85
2-7/8
10.40
9.50
3-1/2
13.30
15.50
ADJ.*
WT.
TYPE
ºTENSILE
CONNECTION
UPSET
DRIFT
O.D.
(IN.)
O.D.
I.D.
I.D.
YIELD
DRILL PIPE DATA
TORSION RECOMMENDED
YIELD
STRENGTH STRENGTH
MAKE-UP
TORQUE
TENSILE
YIELD
TORSION
†
YIELD
STRENGTH STRENGTH
TYPE
(IN.)
(IN.)
(IN.)
(LBS)
(FT-LBS)
(FT-LBS)
(LBS)
(FT-LBS)
5.15
EU
2-9/16
NC26 (IF)
3-3/8
1-3/4
1.625
313680
6800
3400
97820
4760
5.09
EU
2-9/16
W.O.
3-3/8
2
1.807
195720
4500
2250
97820
4760
4.87
EU
2-9/16
O.H.
3-1/8
2
1.807
206280
4600
2300
97820
4760
4.94
EU
2-9/16
SL-H90
3-1/4
2
1.850
202670
5100
2550
97820
4760
7.00
EU
2-9/16
NC26 (IF)
3-3/8
1-3/4
1.625
313680
6800
3400
138220
6250
6.87
EU
2-9/16
O.H.
3-1/4
1-3/4
1.625
294600
6400
3200
138220
6250
6.75
IU
2-1/2
P.A.C.
2-7/8
1-3/8
1.250
238440
4800
2400
138220
6250
7.33
EU
3-3/16
NC31 (IF)
4-1/8
2-1/8
2.000
447130
11800
5900
135900
8080
7.25
EU
3-3/16
W.O.
4-1/8
2-7/16
2.253
277560
7400
3700
135900
8080
6.91
EU
3-3/16
O.H.
3-3/4
2-7/16
2.253
223680
5700
2850
135900
8080
6.97
EU
3-3/16
SL-H90
3-7/8
2-7/16
2.296
260780
7600
3800
135900
8080
10.82
EU
3-3/16
NC31 (IF)
4-1/8
2-1/8
1.963
447130
11800
5900
214340
11550
10.57
EU
3-3/16
O.H.
3-7/8
2-5/32
1.963
345360
8900
4450
214340
11550
10.53
EU
3-3/16
SL-H90
3-7/8
2-5/32
2.006
382550
11300
5650
214340
11550
11.20
IU
3
X.H.
4-1/4
1-7/8
1.750
505080
13400
6700
214340
11550
10.37
IU
3
NC26
3-3/8
1-3/4
1.625
313680
6800
3400
214340
11550
10.29
IU
3
P.A.C.
3-1/8
1-1/2
1.375
269470
5800
2900
214340
11550
10.39
EU
3-7/8
NC38 (IF)
4-3/4
2-11/16
2.563
587310
18100
9050
194270
14150
10.25
EU
3-7/8
NC38 (W.O.)
4-3/4
3
2.804
419800
12800
6400
194270
14150
9.95
EU
3-7/8
O.H.
4-1/2
3
2.804
392040
12100
6050
194270
14150
10.12
EU
3-7/8
SL-H90
4-5/8
3
2.847
366450
12600
6300
194270
14150
13.86
EU
3-7/8
NC38 (IF)
4-3/4
2-11/16
2.457
587310
18100
9050
271570
18550
13.86
EU
3-7/8
O.H.
4-3/4
2-11/16
2.414
559560
17400
8700
271570
18550
14.06
IU
3-5/8
X.H.
4-3/4
2-7/16
2.313
570940
17100
8550
271570
18550
13.51
IU
3-5/8
NC31 (S.H.)
4-1/8
2-1/8
2.000
447130
11800
5900
271570
18550
16.42
EU
3-7/8
NC38 (IF)
5
2-9/16
2.414
649160
20300
10150
322780
21090
*TOOL JOINT PLUS DRILL PIPE
ºTHE TENSILE STRENGTH OF THE TOOL JOINT PIN IS BASED ON 120,000 PSI YIELD AND THE CROSS-SECTIONAL AREA AT THE ROOT OF THE
THREAD 5/8 INCH FROM THE SHOULDER.
†
TORSIONAL YIELD STRENGTH BASED ON SHEAR STRENGTH OF 57.7% OF THE MINIMUM YIELD STRENGTH.
2-5
TADLOCK PIPE
MECHANICAL PROPERTIES OF NEW TOOL JOINTS
AND NEW GRADE E DRILL PIPE
DRILL PIPE DATA
TOOL JOINT DATA
WEIGHT
O.D.
(IN.)
(LBS/FT)
NOM.
WT.
ADJ.*
WT.
TYPE
ºTENSILE
CONNECTION
UPSET
DRIFT
O.D.
O.D.
(IN.)
TYPE
13.83
EU
4-1/2
NC46 (IF)
13.48
EU
4-1/2
12.16
EU
13.09
I.D.
I.D.
YIELD
DRILL PIPE DATA
TORSION RECOMMENDED
YIELD
STRENGTH STRENGTH
MAKE-UP
TORQUE
TENSILE
YIELD
TORSION
†
YIELD
STRENGTH STRENGTH
(IN.)
(IN.)
(IN.)
(LBS)
(FT-LBS)
(FT-LBS)
(LBS)
(FT-LBS)
6
3-1/4
3.125
901170
33600
16800
230750
19470
NC46 (W.O.)
5-3/4
3-7/16
3.313
782990
29100
14550
230750
19470
4-1/2
O.H.
5-1/4
3-15/32
3.287
621240
22200
11100
230750
19470
IU
4-3/16
H-90
5-1/2
2-13/16
2.688
913470
35400
17700
230750
19470
15.98
EU
4-1/2
NC46 (IF)
6
3-1/4
3.125
901160
33600
16800
285360
23290
15.07
EU
4-1/2
O.H.
5-1/2
3-1/4
3.125
759340
27400
13700
285360
23290
15.13
IU
4-3/16
NC40 (F.H.)
5-1/4
2-13/16
2.688
711610
23500
12550
285360
23290
14.29
IU
4-3/16
S.H.
4-5/8
2-9/16
2.438
512040
15000
7500
285360
23290
17.85
EU
4-1/2
NC46 (IF)
6
3-1/4
3.095
901170
33600
16800
324120
25810
16.99
IU
4-3/16
NC40 (F.H.)
5-1/4
2-11/16
2.563
776400
25400
12700
324120
25810
17.30
IU
4-3/16
H-90
5-1/2
2-13/16
2.686
913470
35400
17700
324120
25810
15.40
EU
5
NC50 (IF)
6-3/8
3-3/4
3.625
944000
34100
17050
270030
25910
14.90
EU
5
NC50 (W.O.)
6-1/8
3-7/8
3.750
849600
37700
18850
270030
25910
14.10
EU
5
O.H.
5-3/4
3-31/32
3.770
554760
21300
10650
270030
25910
15.24
IU
4-11/16
H-90
6
3-1/4
3.125
938150
38900
19450
270030
25910
18.10
EU
5
NC50 (IF)
6-3/8
3-3/4
3.625
944000
37700
18850
330560
30810
17.22
EU
5
O.H.
5-7/8
3-3/4
3.625
713880
27500
13750
330560
30810
18.40
IEU
4-11/16
NC46 (X.H.)
6-1/4
3-1/4
3.125
901170
33900
16950
330560
30810
18.13
IEU
4-11/16
F.H.
6
3
2.875
976160
34800
17400
330560
30810
17.94
IEU
4-11/16
H-90
6
3-1/4
3.125
938150
38800
19450
330560
30810
16.68
IEU
4-11/16
NC38 (S.H.)
5
2-11/16
2.563
330560
18120
9060
330560
30810
22.50
EU
5
NC50 (IF)
6-3/8
3-5/8
3.452
1030880
41200
20600
412360
36900
22.18
IEU
4-11/16
NC46 (X.H.)
6-1/4
3
2.875
1048430
39600
19800
412360
36900
21.73
IEU
4-11/16
F.H.
6
3
2.875
976160
34800
17400
412360
36900
21.73
IEU
4-11/16
H-90
6
3
2.875
1085410
45200
22600
412360
36900
20.99
IEU
5-1/8
NC50 (X.H.)
6-3/8
3-3/4
3.625
943990
37700
18850
395600
41170
22.42
IEU
5-1/8
5-1/2 F.H.
7
3-3/4
3.625
1448400
62200
31100
395600
41170
27.01
IEU
5-1/8
NC50 (X.H.)
6-3/8
3-1/2
3.375
1110240
44900
22450
530150
52260
25.60
28.50
IEU
5-1/8
5-1/2 F.H.
7
3-1/2
3.375
1619280
62200
31100
530130
52260
5-1/2
21.90
23.94
IEU
5-11/16
F.H.
7
4
3.875
1265760
56300
28150
437120
50710
5-1/2
24.70
26.86
IEU
5-11/16
F.H.
7
4
3.875
1265760
56300
28150
497220
56570
6-5/8
25.20
27.14
IEU
6-3/4
F.H.
8
5
4.875
1448800
74200
37100
489470
70580
11.85
4
14.00
15.70
13.75
4-1/2
16.60
4-1/2
5
20.00
19.50
*TOOL JOINT PLUS DRILL PIPE
ºTHE TENSILE STRENGTH OF THE TOOL JOINT PIN IS BASED ON 120,000 PSI YIELD AND THE CROSS SECTIONAL AREA AT THE ROOT OF THE
THREAD 5/8 INCH FROM THE SHOULDER.
†
TORSIONAL YIELD STRENGTH BASED ON SHEAR STRENGTH OF 57.7% OF THE MINIMUM YIELD STRENGTH.
2-6
TADLOCK PIPE
MECHANICAL PROPERTIES OF NEW TOOL JOINTS
AND NEW GRADE E DRILL PIPE
DRILL PIPE DATA
WEIGHT
O.D.
(IN.)
(LBS-FT)
NOM.
WT.
2-3/8
2-7/8
6.65
10.40
13.30
3-1/2
15.50
14.00
4
15.70
TOOL JOINT DATA
CONNECTION
UPSET
ADJ.*
DRIFT
O.D.
O.D.
I.D.
WT.
TYPE
GRADE
7.08
EU
X-95
6.91
EU
X-95
2-9/16 SL-H90
3-1/4
7.08
EU
G-105
NC26 IF
3-3/8
6.91
EU
G-105
SL-H90
3-1/4
10.89
EU
X-95
NC31 (IF)
4-1/8
2
10.83
EU
X-95
10.89
EU
G-105
10.83
EU
G-105
11.20
EU
11.11
(IN.)
I.D.
DRILL PIPE DATA
ºTENSILE
TORSION
REC.
TENSILE
YIELD
YIELD
MAKE-UP
YIELD
YIELD
TROQUE
STRENGTH
STRENGTH
STRENGTH STRENGTH
TORSION
†
TYPE
(IN.)
(IN.)
(IN.)
(LBS)
(FT-LBS)
(FT-LBS)
(LBS)
FT-LBS
NC26 (IF)
3-3/8
1-3/4
1.625
313680
6800
3400
175080
7920
1-13/16 1.670
270040
6900
3450
175080
7920
1.625
313680
6800
3400
193500
8750
1-13/16 1.670
270040
6900
3450
193500
8750
1.875
495730
13200
6600
271500
14640
SL-H90
1-3/4
4
2
1.875
443760
13200
6600
271500
14640
4-1/8
2
1.875
495730
13200
6600
300080
16180
SL-H90
4
2
1.875
443760
13200
6600
300080
16180
S-135
NC31 (IF)
4-3/8
1-5/8
1.500
623840
17000
8500
385820
20800
EU
S-135
SL-H90
4-1/8
1-5/8
1.500
571870
17200
8600
385820
20800
14.32
EU
X-95
NC38 (IF)
5
2-9/16
2.438
649160
20300
10150
343990
23500
14.09
EU
X-95
SL-H90
4-3/4
2-9/16
2.438
595810
20900
10450
343990
23500
14.38
EU
G-105
NC38 (IF)
5
2-7/16
2.313
708060
22200
11100
380190
25970
14.09
EU
G-105
SL-H90
4-3/4
2-9/16
2.438
595810
20900
10450
380190
25970
14.45
EU
S-135
NC38 (IF)
5
2-1/8
2.000
836400
26400
13200
488820
33390
14.69
EU
S-135
SL-H90
5
2-1/8
2.000
789090
28100
14050
488200
33390
14.95
EU
S-135
NC40 (4FH) 5-3/8
2-7/16
2.313
897160
30000
15000
488200
33390
16.54
EU
X-95
NC38 (IF)
5
2-7/16
2.313
708060
22200
11100
408850
26710
16.61
EU
G-105
NC38 (IF)
5
2-1/8
2.000
836400
26400
13200
451890
29520
17.43
EU
S-135
NC40 (4FH) 5-1/2
2-1/4
2.125
980000
32900
16450
581000
37950
15.92
EU
X-95
4-1/2
NC46 (IF)
6
3-1/4
3.125
901170
33600
16800
361460
29500
15.92
EU
G-105
4-1/2
NC46 (IF)
6
3-1/4
3.125
901170
33600
16800
399500
32600
16.06
EU
S-135
4-1/2
NC46 (IF)
6
3
2.875 1048430
39200
19600
513650
41920
15.16
IU
X-95
4-3/16 NC40 (IF)
5-1/4
2-11/16 2.563
776400
25400
12700
361460
29500
15.57
IU
X-95
4-3/16 H-90
5-1/2
2-13/16 2.688
913470
35400
17700
361460
29500
15.65
IU
G-105
4-3/16 NC40 (FH)
5-1/2
2-7/16
2.313
897160
30000
15000
399500
32600
15.57
IU
G-105
4-3/16 H-90
5-1/2
2-13/16 2.688
913470
35400
17700
399500
32600
15.82
IU
S-135
4-3/16 NC40 (FH)
5-1/2
1.875 1080120
36300
18150
513650
41920
15.57
IU
S-135
4-3/16 H-90
5-1/2
913470
35400
17700
513650
41920
17.87
EU
X-95
4-1/2
NC46 (IF)
6
3-1/4
3.125
897160
33600
16800
410550
32690
17.87
EU
G-105
4-1/2
NC46 (IF)
6
3-1/4
3.125
901170
33600
16800
453770
36130
18.06
EU
S-135
4-1/2
NC46 (IF)
6
3
2.875 1048430
39600
20950
583420
46460
17.41
IU
X-95
4-3/16 NC40 (FH)
5-1/2
2-7/16
2.313
897160
30000
15000
410550
32690
17.30
IU
X-95
4-3/16 H-90
5-1/2
2-13/16 2.688
913470
35400
17700
410550
32690
17.41
IU
G-105
4-3/16 NC40 (FH)
5-1/2
2-7/16
2.313
897160
30000
15000
453770
36130
17.30
IU
G-105
4-3/16 H-90
5-1/2
2-13/16 2.688
913470
35400
17700
453770
36130
3-3/16 NC31 (IF)
3-7/8
2
2-13/16 2.688
*TOOL JOINT PLUS DRILL PIPE
ºTHE TENSILE STRENGTH OF THE TOOL JOINT PIN IS BASED ON 120,000 PSI YIELD AND THE CROSS SECTIONAL AREA AT THE
ROOT OF THE THREAD 5/8 INCH FROM THE SHOULDER.
†TORSIONAL YIELD STRENGTH BASED ON SHEAR STRENGTH OF 57.7% OF THE MINIMUM YIELD STRENGTH.
2-7
TADLOCK PIPE
MECHANICAL PROPERTIES OF NEW TOOL JOINTS
AND NEW GRADE E DRILL PIPE
DRILL PIPE DATA
WEIGHT
O.D.
(IN.)
(LBS-FT)
NOM.
WT.
16.60
4-1/2
20.00
19.50
5
25.60
21.90
5-1/2
24.70
TOOL JOINT DATA
CONNECTION
UPSET
ADJ.*
DRIFT
O.D.
O.D.
I.D.
I.D.
DRILL PIPE DATA
ºTENSILE
TORSION
REC.
TENSILE
YIELD
YIELD
MAKE-UP
YIELD
YIELD
TROQUE
STRENGTH
STRENGTH
STRENGTH STRENGTH
TORSION
†
WT.
TYPE
GRADE
(IN.)
(IN.)
(IN.)
(IN.)
(LBS)
(FT-LBS)
(FT-LBS)
(LBS)
FT-LBS
18.11
EU
X-95
5
NC50 (IF) 6-3/8
3-3/4
3.625
939360
37700
18850
418700
39020
18.11
EU
G-105
5
NC50 (IF) 6-3/8
3-3/4
3.625
939360
37700
18850
462780
43130
18.32
EU
S-135
5
NC50 (IF) 6-3/8
3-1/2
3.375 1110240
44900
22450
595000
55450
18.51
IEU
X-95
4-11/16 NC46 (XH) 6-1/4
3
2.875 1048430
39600
19800
418700
39020
18.23
IEU
X-95
4-11/16 F.H.
6
3
2.875
976160
34800
17400
418700
39020
18.09
IEU
X-95
4-11/16 H-90
6
3-1/4
3.125
938150
38900
19450
418700
39020
18.51
IEU
G-105
4-11/16 NC46 (XH) 6-1/4
3
2.875 1048430
39600
19800
462780
43130
18.23
IEU
G-105
4-11/16 F.H.
6
3
2.625
976160
34800
17400
462780
43130
18.09
IEU
G-105
4-11/16 H-90
6
3-1/4
3.125
938150
38900
19450
462780
43130
18.54
IEU
S-135
4-11/16 NC46 (XH) 6-1/4
2-3/4
2.625 1183910
44900
22450
595000
55450
18.66
IEU
S-135
4-11/16 F.H.
6-1/4
2-1/2
2.375 1235340
44800
22400
595000
55450
18.32
IEU
S-135
4-11/16 H-90
6
3
2.875 1085410
45200
22600
595000
55450
23.11
EU
X-95
5
NC50 (IF) 6-3/8
3-1/2
3.250 1110240
44700
22350
522320
46660
23.11
EU
G-105
5
NC50 (IF) 6-3/8
3-1/2
3.375 1110240
44700
22350
577300
51570
22.42
EU
S-135
5
NC50 (IF) 6-5/8
3
2.875 1416480
57800
28900
742240
66300
22.33
IEU
X-95
4-11/16 NC46 (XH) 6-1/4
2-3/4
2.625 1183920
44900
22450
522320
46740
21.69
IEU
X-95
4-11/16 F.H.
6
2-1/2
2.375 1235400
44300
22150
522320
46740
21.74
IEU
X-95
4-11/16 H-90
6
3-1/4
3.125
938150
38900
19450
522320
46740
22.45
IEU
G-105
4-11/16 NC46 (XH) 6-1/4
2-1/2
2.375 1307640
49600
25800
577300
51660
21.69
IEU
G-105
4-11/16 F.H.
6
2-1/2
2.375 1235400
44300
22150
577300
51660
21.96
IEU
G-105
4-11/16 H-90
6
3
2.875 1055410
45200
22600
577300
51660
22.56
IEU
S-135
4-11/16 NC46 (XH) 6-1/4
2-1/4
2.125 1419480
53800
26900
742240
66420
21.09
IEU
X-95
NC50 (XH) 6-3/8
3-1/2
3.375 1110240
44700
22350
501090
52140
22.52
IEU
X-95
5-1/2 F.H.
3-3/4
3.625 1448400
62200
31100
501090
52140
21.50
IEU
G-105
NC50 (XH) 6-1/2
3-1/4
3.125 1269240
51400
25700
553830
57600
22.52
IEU
G-105
5-1/2 F.H.
3-3/4
3.625 1448400
62200
31100
553830
57600
22.09
IEU
S-135
NC50 (XH) 6-5/8
2-3/4
2.625 1551960
63400
31700
712070
74100
23.24
IEU
S-135 5-1/8
5-1/2 F.H. 7-1/4
3-1/2
3.375 1619230
71000
35500
712070
74100
28.30
IEU
X-95
NC50 (XH) 6-1/2
3
2.875 1416480
57000
28500
671520
66190
28.62
IEU
X-95
5-1/2 F.H.
3-1/2
3.375 1619280
62200
31100
671520
66190
28.11
IEU
G-105
NC50 (XH) 6-5/8
2-3/4
2.625 1551960
63400
31700
742200
73160
28.89
IEU
G-105
5-1/2 F.H. 7-1/4
3-1/2
3.375 1619280
72500
36250
742200
73160
29.23
IEU
S-135
5-1/2 F.H. 7-1/4
3-1/4
3.125 1778280
77700
38850
954260
94060
24.24
IEU
X-95
F.H.
7
3-3/4
3.625 1448400
62200
31100
553680
64230
24.98
IEU
G-105
F.H.
7-1/4
3-1/2
3.375 1619280
72500
36250
611960
70990
25.86
IEU
S-135 5-11/16 F.H.
7-1/2
3
2.875 1925520
86800
43400
786810
91280
27.89
IEU
X-95
F.H.
7-1/4
3-1/2
3.375 1619280
72500
36250
629810
71660
27.89
IEU
G-105
F.H.
7-1/4
3-1/2
3.375 1619280
72500
36250
696110
79200
28.74
IEU
S-135
F.H.
7-1/2
3
2.875 1925520
86800
43400
895000
101830
TYPE
7
7
7
*TOOL JOINT PLUS DRILL PIPE
ºTHE TENSILE STRENGTH OF THE TOOL JOINT PIN IS BASED ON 120,000 PSI YIELD AND THE CROSS SECTIONAL AREA AT THE
ROOT OF THE THREAD 5/8 INCH FROM THE SHOULDER.
†TORSIONAL YIELD STRENGTH BASED ON SHEAR STRENGTH OF 57.7% OF THE MINIMUM YIELD STRENGTH.
2-8
2-9
THICK
(IN.)
(IN.)
B
2-1/16
2-9/16
2-3/4
3
(IN.)
A
3-1/2
4
4-1/2
5
1.000
.875
.719
.719
WALL
DIM.
I.D.
SIZE
NOM.
NOM. TUBE
5-1/2
5
4-1/2
4
C
(IN.)
CENTER
5-1/8
4-5/8
4-1/8
3-5/8
D
(IN.)
ENDS
UPSET SEC.
TUBE
691,185
548,075
407,550
345,400
(LBS)
YIELD
TENSILE
56,365
40,625
28,745
19.535
(FT LBS)
YIELD
TORSIONAL
PROPERTIES
PERFORMANCE
NC50:4-1/2 IF
NC46:4 IF
NC40:4 FH
NC38:3-1/2 IF
CONNECTION
6-1/2
6-1/4
5-1/4
4-3/4
E
(IN.)
O.D.
DIMENSIONS
3-1/8
2-7/8
2-11/16
2-3/16
F
(IN.)
I.D.
TOOL JOINT
1,266,000
1,024,500
711,475
748,750
(LBS)
YIELD
TENSILE
51,375
38,800
23,525
17,575
(FT-LBS)
YIELD
TORSIONAL
29,400
21,800
13,250
9,900
(FT-LBS)
TORQUE
MAKE-UP
PERFORMANCE PROPERTIES
DRILCO “HEVI-WATE” DRILL PIPE
DIMENSIONAL DATA AND PERFORMANCE ROPERTIES
30 FT.
FT.
50
42
28
1550
1290
870
810
WT/JT
48
40
---
---
FT.
WT/
2090
1745
---
---
45 FT.
WT/JT
RANGE III
INCLUDING TUBE & JOINT (LBS)
RANGE II
WT/
26
WEIGHT
APPROXIMATE WEIGHT
TADLOCK PIPE
TADLOCK PIPE
2-10
TADLOCK PIPE
SPECIFICATION GUIDE
BAKER DRILL PIPE FLOATS AND VALVES
TOOL JOINT TYPES
API REGULAR
HUGHES OR REED ACME REGULAR
UNION TOOL
API FULL HOLE
REED ACME FULL HOLE
HUGHES ACME STREAMLINE
HUGHES XTRA HOLE
REED SEMI-INTERNAL FLUSH
API INTERNAL FLUSH
HYDRIL TYPE “IF”
(INT. FLUSH EXT. UPSET)
HYDRIL EIU (EXT. INT. UPSET)
HYDRIL TYPE “F”
(EXTERNAL FLUSH)
HUGHES EXT. FLUSH ACME TYPE
HUGHES EXT. FLUSH FULL HOLE TYPE
1R
2-3/8
2-3/8
2-3/8
1F-2R
2-7/8
2-7/8
2-7/8
3-1/2
2-3/8
2F-3Rº
3-1/2
3-1/2
3Fº
3-1/2 IF
2-7/8
4
2-3/8
2-7/8
2-7/8
3-1/2§
3-1/2§
3-1/2§
3-1/2
3-1/2
SIZES
4Rº
4-1/2
4-1/2
4Fº
4-1/2
2-3/8
2-3/8§
2-7/8
2-7/8§
2-7/8
3-1/2§
3-1/2
4-1/2§
4-1/2§
4-1/2§
4-1/2
4-1/2
4
3-1/2
3-1/2§
3-1/2
4-1/2
5
5Rº
5-1/2–5-9/16*
5-1/2–5-9/16
5-1/2–5-9/16*
6F
8-5/8
5-1/2–5-9/16§
5-1/2–5-9/16§
5-1/2–5-9/16§
6-5/8§
5
4-1/2
4-1/2§
4-1/2
4
5-1/2–5-9/16
5-1/2–5-9/16
4-1/2
5F-6Rº
6-5/8†
6-5/8
6-5/8†
5
5-1/2–5-9/16
6-5/8
6-5/8
6-5/8
4-1/2
§ Float Body in these sizes has smaller I.D. than Standard Tool Joint
º Sizes available in both Model “F” and Model “G”; all other are available in Model “F” only
* Interchangeable
† Interchangeable
DIMENSIONAL DATA
D
SIZE
VALVE
1R
1F-2R
2F-3R
3F
3-1/2IF
DIAMETER OF
VALVE
1-21/32
1-29/32
2-13/32
2-13/16
3-1/8
R
(D PLUS 1/32)
DIAMETER
OF
RECESS FOR
VALVE
1-11/16
1-15/16
2-7/16
2-27/32
3-5/32
L
LENGTH OF
VALVE
5-7/8
6-1/4
6-1/2
10
10
T*
DIAMETER
OF
RECESS
FOR
TOTCO SPIDER
1-15/16
1-1/2
1-29/32
2-7/16
2-11/16
* If this diameter is the same, or smaller than standard tool joint ID, disregard it.
2-11
D
SIZE
VALVE
4R
4F
5R
5F-6R
6F
DIAMETER OF
VALVE
3-15/32
3-21/32
3-7/8
4-25/32
5-11/16
R
(D PLUS 1/32)
DIAMETER
OF
RECESS FOR
VALVE
3-1/2
3-11/16
3-29/32
4-13/16
5-23/32
L
LENGTH OF
VALVE
8-5/16
12
9-3/4
11-3/4
14-5/8
T*
DIAMETER
OF
RECESS
FOR
TOTCO SPIDER
2-15/16
3-1/4
3-3/8
4-9/32
5-3/16
TADLOCK PIPE
DRILL COLLARS AND CONNECTIONS
CONNECTIONS & MAKE UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WEIGHTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GROOVES FOR ELEVATORS & SLIPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAPACITIES OF ELEVATORS/SPIDERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . BOTTLENECK ELEVATOR BORES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HINGED STRIPPING BOWLS & PLUGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . KELLYS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MAXIMUM CONE DIMENSIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BIT SIZES AND CLEARANCES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
5
6
7
8
8
9-10
11-12
13-15
TADLOCK PIPE
DRILL COLLARS
CONNECTIONS AND RECOMMENDED MAKE UP TORQUE1
(see Remarks on page 3-4)
CONNECTION
SIZE
TYPE
(IN.)
API
2-7/8
NC23
PAC3
MINIMUM MAKE-UP TORQUE IN FOOT-POUNDS2
O.D.
BORE OF DRILL COLLAR (IN INCHES)
(IN.)
1
1-1/4
1-1/2
3
*2,500
*2,500
*2,500
3-1/8
*3,300
*3,300
*2,600
3-1/4
4,000
3,400
2,600
3
*3,800
*3,800
2,900
3-1/8
*4,900
4,200
2,900
3-1/4
5,200
4,200
2,900
1-3/4
2-3/8
API I.F.
3-1/2
*4,600
*4,600
3,700
API
NC26
3-3/4
5,500
4,700
3,700
2-7/8
SLIM HOLE
2
2-1/4
2-1/2
2-7/8
EXTRA HOLE
3-3/4
*4,100
*4,100
*4,100
3-1/2
DBL STREAMLINE
3-7/8
*5,300
*5,300
*5,300
2-7/8
MOD. OPEN
4-1/8
*8,000
*8,000
7,400
2-7/8
API I.F.
3-7/8
*4,600
*4,600
*4,600
*4,600
API
NC31
4-1/8
*7,300
*7,300
*7,300
6,800
3-1/2
SLIM HOLE
4-1/4
*8,800
*8,800
8,100
6,800
4-1/2
10,000
9,300
8,100
6,800
4-1/2
*8,900
*8,900
*8,900
7,400
4-3/4
12,100
10,800
9,200
7,400
5
12,100
10,800
9,200
7,400
EXTRA HOLE
4-1/4
*5,100
*5,100
*5,100
*5,100
4
SLIM HOLE
4-1/2
*8,400
*8,400
*8,400
8,200
3-1/2
MOD. OPEN
4-3/4
*11,900
11,700
10,000
8,200
5
13,200
11,700
10,000
8,200
5-1/4
13,200
11,700
10,000
8,200
API
3-1/2
NC35
2-13/16
3-1/2
API I.F.
4-3/4
*9,900
*9,900
*9,900
*9,900
8,300
API
NC38
5
*13,800
*13,800
12,800
10,900
8,300
4-1/2
SLIM HOLE
5-1/4
16,000
14,600
12,800
10,900
8,300
5-1/2
16,000
14,600
12,800
10,900
8,300
4-3/4
*8,700
*8,700
*8,700
*8,700
*8,700
3-1/2
H-904
5
*12,700
*12,700
*12,700
*12,700
10,400
5-1/4
*16,900
16,700
15,000
13,100
10,400
5-1/2
18,500
16,700
15,000
13,100
10,400
FULL HOLE
5
*10,800
*10,800
*10,800
*10,800
*10,800
API
NC40
5-1/4
*15,100
*15,100
*15,100
14,800
12,100
4
MOD. OPEN
5-1/2
*19,700
18,600
16,900
14,800
12,100
4-1/2
DBL STREAMLINE
5-3/4
20,400
18,600
16,900
14,800
12,100
6
20,400
18,600
16,900
14,800
12,100
4
NOTE: In each connection size and type group, torque values apply to all connection types in the group when used with the same drill collar outside collar diameter and
bore; i.e., 2-3/8 API I.F., API NC26 and 2-7/8 Slim Hole connections used with 3-1/2 x 1-1/4 drill collars all have the same minimum make-up torque of 4600 ft.-lbs.
and the BOX is the weaker member.
*Torque figures preceded by an asterisk indicate the BOX as the weaker member for the corrresponding outside diameter (O.D.) and bore. The PIN is the weaker member
for all other torque values.
3-1
TADLOCK PIPE
DRILL COLLARS
CONNECTIONS AND RECOMMENDED MAKE UP TORQUE1
(see Remarks on page 3–4)
SIZE
CONNECTION
TYPE
(IN.)
4
4-1/2
API
4-1/2
4-1/2
H-904
API REGULAR
NC44
API FULL HOLE
EXTRA HOLE
MINIMUM MAKE-UP TORQUE IN FOOT-POUNDS2
O.D.
BORE OF DRILL COLLAR (IN INCHES)
(IN.)
2
2-1/4
2-1/2
2-13/16
5-1/4
*12,500
12,500
12,500
*12,500
5-1/2
*17,300
17,300
17,300
16,500
5-3/4
*22,300
21,500
19,400
16,500
6
23,500
21,500
19,400
16,500
6-1/4
23,500
21,500
19,400
16,500
5-1/2
*15,400
15,400
15,400
*15,400
5-3/4
*20,300
20,300
19,400
16,200
6
23,400
21,600
19,400
16,200
6-1/4
23,400
21,600
19,400
16,200
5-3/4
*20,600
*20,600
*20,600
18,000
6
25,000
23,300
21,200
18,000
6-1/4
25,000
23,300
21,200
18,000
6-1/2
25,000
23,300
21,200
18,000
5-1/2
*12,900
*12,900
*12,900
*12,900
*12,900
5-3/4
*17,900
*17,900
*17,900
*17,900
17,700
6
*23,300
*23,300
22,800
19,800
17,700
6-1/4
27,000
25,000
22,800
19,800
17,700
6-1/2
27,000
25,000
22,800
19,800
17,700
5-3/4
*17,600
*17,600
*17,600
*17,600
3
API
NC46
6
*23,200
*23,200
22,200
20,200
4
API I.F.
6-1/4
28,000
25,500
22,200
20,200
5
DBL. STREAMLINE
6-3/4
28,000
25,500
22,200
20,200
4-1/2
MOD. OPEN
4-1/2
H-904
5-3/4
*17,600
*17,600
*17,600
*17,600
6
*23,400
*23,400
23,000
21,000
6-1/4
28,500
26,000
23,000
21,000
6-1/2
28,500
26,000
23,000
21,000
6-3/4
28,500
26,000
23,000
21,000
6-1/4
*25,000
*25,000
*25,000
*25,000
6-1/2
31,500
*31,500
29,500
27,000
6-3/4
35,000
33,000
29,500
27,000
7
35,000
33,000
29,500
27,000
5
H-904
3-1/4
4-1/2
API I.F.
6-1/4
*22,800
*22,800
*22,800
*22,800
*22,800
API
NC50
6-1/2
*29,500
*29,500
*29,500
*29,500
26,500
5
EXTRA HOLE
6-3/4
*36,000
35,000
32,000
30,000
26,500
5
MOD. OPEN
7
38,000
35,500
32,000
30,000
26,500
5-1/2
DBL. STREAMLINE
7-1/4
38,000
35,500
32,000
30,000
26,500
5-1/2
H-904
6-3/4
*34,000
*34,000
*34,000
34,000
7
*41,500
40,000
36,500
34,000
7-1/4
42,500
40,000
36,500
34,000
7-1/2
42,500
40,000
36,500
34,000
NOTE: In each connection size and type group, torque values apply to all connection types in the group when used with the same drill collar outside collar diameter and
bore; i.e., 2-3/8 API I.F., API NC26 and 2-7/8 Slim Hole connections used with 3-1/2 x 1-1/4 drill collars all have the same minimum make-up torque of 4600 ft.-lbs.
and the BOX is the weaker member.
*Torque figures preceded by an asterisk indicate the BOX as the weaker member for the corrresponding outside diameter (O.D.) and bore. The PIN is the weaker member
for all other torque values.
3-2
TADLOCK PIPE
DRILL COLLARS
CONNECTIONS AND RECOMMENDED MAKE UP TORQUE1
(see Remarks on page 3-4)
CONNECTION
TYPE
SIZE
(IN.)
5-1/2
API REGULAR
5-1/2
API FULL HOLE
API
NC56
6-5/8
API REGULAR
6-5/8
H-904
API
NC61
5-1/2
API I.F.
6-5/8
API FULL HOLE
API
NC70
API
NC77
O.D.
(IN.)
6-3/4
7
7-1/4
7-1/2
7
7-1/4
7-1/2
7-3/4
7-1/4
7-1/2
7-3/4
8
7-1/2
7-3/4
8
8-1/4
7-1/2
7-3/4
8
8-1/4
8
8-1/4
8-1/2
8-3/4
9
8
8-1/4
8-1/2
8-3/4
9
9-1/4
8-1/2
8-3/4
9
9-1/4
9-1/2
9
9-1/4
9-1/2
9-3/4
10
10-1/4
10
10-1/4
10-1/2
10-3/4
11
2-1/4
*31,500
*39,000
42,000
42,000
1111
BORE OF DRILL COLLAR (IN INCHES)
2-13/16
3
3-1/4
*31,500
*31,500
36,000
33,500
36,000
33,500
36,000
33,500
*32,500
*32,500
*32,500
*40,500
*40,500
*40,500
47,000
45,000
41,500
47,000
45,000
41,500
*40,000
*40,000
*40,000
48,000
45,000
42,000
48,000
45,000
42,000
48,000
45,000
42,000
*46,000
*46,000
*46,000
53,000
50,000
47,000
53,000
50,000
47,000
53,000
50,000
47,000
*46,000
*46,000
*46,000
*55,000
53,000
49,500
56,000
53,000
49,500
56,000
53,000
49,500
*54,000
*54,000
*54,000
*64,000
*64,000
61,000
68,000
65,000
61,000
68,000
65,000
61,000
68,000
65,000
61,000
*56,000
*56,000
*56,000
*66,000
*66,000
63,000
70,000
67,000
63,000
70,000
67,000
63,000
70,000
67,000
63,000
70,000
67,000
63,000
*67,000
*67,000
*67,000
*78,000
*78,000
76,000
83,000
80,000
76,000
83,000
80,000
76,000
83,000
80,000
76,000
*75,000
*75,000
*75,000
*88,000
*88,000
*88,000
*101,000
*101,000
100,000
107,000
105,000
100,000
107,000
105,000
100,000
107,000
105,000
100,000
*107,000
*107,000
*122,000
*122,000
*138,000
*138,000
143,000
138,000
143,000
138,000
2-1/2
*31,500
*39,000
39,500
39,500
*32,500
*40,500
*49,000
51,000
*40,000
*48,500
51,000
51,000
*46,000
*55,000
57,000
57,000
*46,000
*55,000
59,500
59,500
*54,000
*64,000
72,000
72,000
72,000
*56,000
*66,000
74,000
74,000
74,000
74,000
3-1/2
3-3/4
*56,000
59,000
59,000
59,000
59,000
59,000
*67,000
72,000
72,000
72,000
72,000
*75,000
*88,000
95,000
95,000
95,000
95,000
*107,000
*122,000
133,000
133,000
133,000
66,500
66,500
66,500
66,500
66,500
*75,000
*88,000
90,000
90,000
90,000
90,000
*107,000
*122,000
128,000
128,000
128,000
NOTE: In each connection size and type group, torque values apply to all connection types in the group when used with the same drill collar outside collar diameter and
bore; i.e., 2-3/8 API I.F., API NC26 and 2-7/8 Slim Hole connections used with 3-1/2 x 1-1/4 drill collars all have the same minimum make-up torque of 4600 ft.-lbs.
and the BOX is the weaker member.
*Torque figures preceded by an asterisk indicate the BOX as the weaker member for the corrresponding outside diameter (O.D.) and bore. The PIN is the weaker member
for all other torque values.
3-3
TADLOCK PIPE
DRILL COLLARS
CONNECTIONS AND RECOMMENDED MAKE UP TORQUE1
CONNECTION
SIZE
TYPE
7
7-5/8
7-5/8
7-5/8
7-5.8
8-5/8
8-5/8
8-5/8
8-5/8
BORE OF DRILL COLLAR (IN INCHES)
(IN.)
2-13/16
3
3-1/4
3-1/2
8
*53,000
*53,000
*53,000
*53,000
8-1/4
*63,000
*63,000
*63,000
60,500
8-1/2
71,500
68,500
65,000
60,500
TORQUE
8-3/4
*67,500
*67,500
66,500
62,000
FACE)
9
74,000
71,000
66,500
62,000
API REGULAR
8-1/2
*60,000
*60,000
*60,000
*60,000
8-3/4
*71,000
*71,000
*71,000
*71,000
9
*83,000
*83,000
79,000
74,000
9-1/4
88,000
83,000
79,000
74,000
9-1/2
88,000
83,000
79,000
74,000
API REGULAR
9-1/4
*72,000
*72,000
*72,000
*72,000
(WITH LOW
9-1/2
*85,000
*85,000
82,000
77,000
TORQUE FACE)
9-3/4
91,000
87,000
82,000
77,000
10
91,000
87,000
82,000
77,000
9
*72,000
*72,000
*72,000
*72,000
9-1/4
*85,500
*85,500
*85,5000
*85,500
9-1/2
*98,000
*98,000
*98,000
95,500
9-3/4
*91,000
*91,000
*91,000
*91,000
(WITH LOW
10
*105,000
*105,000
103,500
98,000
TORQUE FACE)
10-1/4
112,500
108,000
103,500
98,000
10-1/2
112,500
108,000
103,500
98,000
10
*108,000
*108,000
*108,000
*108,000
10-1/4
*123,000
*123,000
*123,000
123,000
10-1/2
139,000
134,000
129,000
123,000
(IN.)
7
MINIMUM MAKE-UP TORQUE IN FOOT-POUNDS
O.D.
H-904
3-3/4
H-904 (WITH LOW
H-904
H-904
API REGULAR
API REGULAR
(WITH LOW
10-3/4
*112,000
*112,000
*112,000
*112,000
TORQUE FACE)
11
*129,000
*129,000
*129,000
*129,000
H-904
10-1/4
*112,500
*112,500
*112,500
*112,500
10-1/2
*128,500
*128,500
*128,500
*128,500
H-904
10-3/4
*92,500
*92,500
*92,500
*92,500
(WITH LOW
11
*110,000
*110,000
*110,000
*110,000
TORQUE FACE)
11-1/4
*128,000
*128,000
*128,000
*128,000
NOTE: In each connection size and type group, torque values apply to all connection types in the group when used with the same drill collar outside collar diameter and
bore; i.e., 2-3/8 API I.F., API NC26 and 2-7/8 Slim Hole connections used with 3-1/2 x 1-1/4 drill collars all have the same minimum make-up torque of 4600 ft.-lbs.
and the BOX is the weaker member.
*Torque figures preceded by an asterisk indicate the BOX as the weaker member for the corresponding outside diameter (O.D.) and bore. The PIN is the weaker member
for all other torque values.
1Recommended make-up torque calculations assume the thorough application to all threads and shoulders of a thread compound which contains either 40 – 60% by
weight finely powdered metallic zinc or 60% by weight finely powdered metallic lead and never more than 0.3% sulfur. Calculations also assume use of the modified
Jack Screw Formula contained in API RP 7G, Appendix A, Paragraph A.8, and a unit stress of 62,500 PSI in the box or pin, whichever is weaker.
2Normal torque range = tabulated value plus 10%. Higher values may be used under extreme conditions.
3Make-up torque for 2-7/8 PAC based on 87,500 PSI stress and other factors in 1, above.
4Make-up torque for H-90 based on 56,000 PSI stress and other factors in 1, above.
3-4
TADLOCK PIPE
DRILL COLLAR WEIGHT (POUNDS PER FOOT)
COLLAR O.D.
(IN.)
DRILL COLLAR I.D. (IN.)
7/8
1
1-3/16 1-1/4 1-1/2 1-3/4
2
2-1/4 2-1/2 2-3/4 2-13/16
3
3-1/4 3-1/2 3-3/4
4
4-1/4
29
24
18
36
31
25
48
43
38
33
60
56
51
46
40
72
68
64
59
54
48
83
80
76
72
67
62
56
93
92
89
85
80
75
70
65
105
102
100
98
93
89
84
79
74
117
114
111
110
107
103
98
93
88
83
130
127
124
120
119
116
112
108
103
98
92
142
139
137
133
130
129
126
122
118
113
108
102
154
152
150
147
144
140
139
136
132
128
123
118
112
165
163
160
157
154
151
150
147
143
138
133
128
123
8-1/4
176
174
171
168
165
162
160
158
154
149
144
139
134
8-1/2
187
185
182
179
176
173
172
169
165
160
155
150
145
8-3/4
199
197
194
192
188
185
184
181
177
172
167
162
157
9
210
208
206
203
200
197
195
192
188
184
179
174
168
9-1/4
223
221
218
216
212
209
208
205
201
196
191
186
181
9-1/2
234
232
230
227
224
221
220
216
212
209
204
199
193
9-3/4
248
245
243
240
237
234
232
229
225
221
216
212
206
10
261
259
257
254
251
247
246
243
239
235
230
225
219
10-1/4
275
273
270
268
264
261
260
257
253
248
243
238
233
10-1/2
289
287
283
281
277
275
274
270
266
261
256
251
247
10-3/4
303
301
298
296
292
289
288
285
281
276
271
266
261
11
317
315
313
310
307
304
303
299
295
291
286
281
276
11-1/4
334
331
328
325
321
319
318
314
310
306
301
296
290
11-1/2
348
346
343
340
336
334
333
329
325
320
315
310
306
11-3/4
365
362
359
356
352
349
348
345
341
336
331
326
321
12
379
377
374
371
368
365
364
361
357
352
347
342
337
1-3/4
6
2-7/8
20
19
18
18
16
14
11
9
5
3
22
21
20
20
18
16
13
11
7
4
3-1/8
24
23
22
22
20
18
15
13
9
6
3-1/4
26
25
24
22
20
18
15
12
8
3-1/2
30
29
29
27
24
22
19
16
13
3-5/8
32
31
31
29
27
24
22
18
15
14
3-3/4
35
34
33
32
29
27
24
21
17
16
14
4
40
39
39
37
35
32
29
26
23
22
19
4-1/8
43
42
41
39
37
35
32
29
25
24
21
17
4-1/4
46
45
44
42
40
38
35
32
28
27
24
20
15
4-1/2
51
50
50
48
46
43
41
37
34
33
30
26
21
57
56
54
52
50
47
44
40
39
36
32
28
23
63
61
59
56
53
50
47
46
43
39
34
5-1/4
68
65
63
60
57
54
53
50
46
41
5-1/2
75
73
70
67
64
61
60
57
53
5-3/4
82
80
78
75
72
68
67
64
6
90
88
85
83
79
76
75
6-1/4
98
96
94
91
88
84
6-1/2
107
105
102
99
96
6-3/4
116
114
111
108
7
125
123
120
7-1/4
134
132
7-1/2
144
7-3/4
8
4-3/4
5
NOTE 1: To determine weights of standard drill collars not shown use the following formula:
(AREA O.D. – AREA I.D.) x 3.408 = Wt./Ft. See Area Chart in Section 7, page 6.
NOTE 2: To determine approximate weights of spiral drill collars, find the pounds per foot for a collar of the same size in the above chart and multiply by 96%; for example,
a collar with an O.D. of 6” and an I.D. of 2” = 85 pounds per foot above; 85 x .96 = 81.6 pounds per foot (an approximation).
NOTE 3: To determine class weights, multiply by number of feet; for example, a 30’ class collar with an O.D. of 6” and an I.D. of 2” weighs 85 pounds per foot; 85 x 30 =
2550 pounds.
3-5
TADLOCK PIPE
DRILL COLLAR GROOVES FOR ELEVATORS & SLIPS
DRILL COLLAR GROOVES FOR ELEVATORS & SLIPS
GROOVE DIMENSIONS
BASED ON DRILL COLLAR O.D.
DRILL COLLAR
ELEV. GROOVE
O.D. RANGES
DEPTH A*
R
C†
SLIP GROOVE
DEPTH B*
D†
4 – 4-5/8
7/32
1/8
4º
3/16
3-1/2º
4-3/4 – 5-5/8
1/4
1/8
5º
3/16
3-1/2º
5-3/4 – 6-5/8
5/16
1/8
6º
1/4
5º
6-3/4 – 8-5/8
3/8
3/16
7-1/2º
1/4
5º
8-3/4 – LARGER
7/16
1/4
9º
1/4
5º
* A and B dimensions are from the nominal O.D.s of new drill collars.
†
Angle C and D dimensions are reference and approximations.
NOTE: API RP7G States: “These dimensions are not to be construed as API Standard.”
3-6
TADLOCK PIPE
RATED CAPACITY OF ELEVATORS AND SPIDERS
BJ TYPE LYT ELEVATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 TONS
BJ TYPE MYT ELEVATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 TONS
BJ TYPE YT TUBING ELEVATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 TONS
BJ TYPE YC CASING ELEVATORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 TONS
BJ SLIP GRIP CASING ELEVATORS 7-5/8. . . . . . . . . . . . . . . . . . . . . . . . . 150 TONS
BJ SLIP CASING ELEVATORS 10-3/4. . . . . . . . . . . . . . . . . . . . . . . . . . . .
BJ SLIP GRIP CASING ELEVATORS 13-3/8. . . . . . . . . . . . . . . . . . . . . . . .
10-3/4 BJ SLIP GRIP CASING ELEVATORS AND/OR SPIDER. . . . . . . . . . .
13-3/8 BJ CASING SPIDER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13-3/8 BJ SLIP GRIP CASING ELEVATOR AND/OR SPIDER. . . . . . . . . . . .
200 TONS
200 TONS
500 TONS
400 TONS
350 TONS
BJ “A” SERIES COLLAR TYPE ELEVATORS
Rated Capacities in Tons
SIZE (O.D.)
(IN.)
1.050
1.315
1.660
1.900
2-3/8
2-7/8
3-1/2
4
4-1/2
5-1/2
6-5/8
7
7-5/8
8-5/8
SLA 100
------------------100
100
100
100
100
TA-150
------------------150
150
150
150
150
TA-100
--------100
100
100
100
100
-----------
TA-65
----65
65
65
65
65
65
65
-----------
TA-35
35
35
35
35
35
35
-----------------
AA
------------250
275
275
300
300
300
-----
MAA
--------175
175
175
225
225
250
250
250
-----
RA
--------125
125
125
150
150
175
175
175
-----
BJ “G” SERIES 18° TYPE ELEVATORS
Capacities in Tons
SIZE (O.D.)
2-3/8
2-7/8
3-1/2 (FH & IF)
4
4-1/2 (REG. & FH)
5 – 4-1/2 (IF)
5-1/2
GG
------350
350
350
350
MGG
----250
250
250
250
250
RG
150
150
150
175
175
200
200
MG
100
100
100
100
100
100
---
BJ TYPE “SLX” SIDE DOOR COLLAR TYPE ELEVATORS
Rated Capacities in Tons
SIZE (O.D.)
(IN.)
1.600 – 1.900
2-3/8 – 2-7/8
3-1/2
4
4-1/2 (REG. F.H.)
5 – 5-1/2 – 4-1/2 (IF)
6-5/8 – 7
7-5/8 – 8-5/8
9-5/8
10-3/4
11-3/4
13-3/8
16
18-5/8
20
24-1/2
SLX-65
SLX-100
SLX-150
SLX-250
65
65
-----------------------------
--100
100
100
100
100
---------------------
------------150
150
150
150
150
150
150
150
150
---
------------------------------250
3-7
TADLOCK PIPE
BAASH-ROSS 18° ELEVATOR BORE CHART
C
D
NECK DIAMETER
TOP
CENTER
E
E
T-250 &
BORE
BORE
T-100
T-150
T-350
2-9/16
4-1/4
2-21/32
---
---
---
3
4-3/8
3-3/32
---
1-5/8
---
IF
3-3/16
4-3/4
3-9/32
---
1-5/8
---
R & FH
3-11/16
5-1/4
3-25/32
---
1-5/8
---
IF
3-7/8
5-1/2
3-31/32
---
1-5/8
---
FH
4-3/16
6-1/2
4-9/32
1-1/2
1-5/8
3-3/8
DRILL PIPE SIZE
2-3/8
IF
2-7/8
R & FH
3-1/2
4
IF
4-1/2
5
5-1/2
E
4-1/2
6-3/4
4-25/32
1-1/2
1-5/8
3-3/8
4-11/16
6-3/4
4-25/32
1-1/2
1-5/8
3-3/8
IF
5
7-1/8
5-1/4
1-1/2
1-5/8
3-3/8
EIU
5-1/8
7-1/8
5-1/4
1-1/2
1-5/8
3-3/8
5-11/16
7-7/8
5-13/16
---
1-5/8
3-3/8
R & FH
R & FH
HINGED STRIPPING BOWLS
50 TON CAPACITY
100 TON CAPACITY
150 TON CAPACITY
A
6-7/8
7-1/2
*7-9/16
*9-7/8
*13-1/16
B
5
6-3/8
5-1/2
7
10-1/8
C
6
6
10
10
12
*AVAILABLE WITH REDA CABLE SLOT
3-8
TADLOCK PIPE
HEXAGON KELLYS
DIMENSIONS
KELLY SIZE
LOWER PIN*
MAX. BORE
ACROSS FLATS
ACROSS CORNER
RADIUS
CONNECTION (STD.)
(IN.) A
(IN.) B
(IN.) C
(IN.) R
2-3/8 IF (NC26)
1-1/2
3
3-3/8
1/4
4-1/2 REG.
2-7/8 IF (NC31)
1-3/4
3-1/2
3-31/32
1/4
4-1/2 REG.
3-1/2 IF (NC38)
2-1/4
4-1/4
4-13/16
5/16
4 IF (NC46)1
3
5-1/4
5-31/32
3/8
5-1/2 F.H.2
3-1/2
6
6-13/16
3/8
UPPER BOX CONNECTION*
(API)
STANDARD
OPTIONAL
3
6-5/8 REG.
4-1/2 REG.
3-1/2
6-5/8 REG.
4-1/4
6-5/8 REG.
5-1/4
6-5/8 REG.
6
6-5/8 REG.
4-1/2 (NC50) - LOWER PIN CONNECTION WITH 3-1/2 I.D., A IS OPTIONAL
2
NC56 - LOWER PIN CONNECTION OPTIONAL
*BOX - LEFT HAND CONNECTION; PIN - RIGHT HAND CONNECTION.
1
3-9
TADLOCK PIPE
SQUARE KELLYS
DIMENSIONS
KELLY SIZE
LOWER PIN*
MAX BORE
ACROSS FLATS
ACROSS CORNER
RADIUS
CONNECTION (STD.)
(IN.) A
(IN.) B
(IN.) C
(IN.) R
2-3/8 IF (NC26)
1-1/4
2-1/2
3-9/32
5/16
4-1/2 REG.
2-7/8 IF (NC31)
1-3/4
3
3-15/16
3/8
6-5/8 REG.
4-1/2 REG.
3-1/2 IF (NC38)
2-1/4
3-1/2
4-17/32
1/2
4-1/4
6-5/8 REG.
4-1/2 REG.
4 IF (NC46)1
2-13/16
4-1/4
5-9/16
1/2
5-1/4
6-5/8 REG.
5-1/2 F.H.2
3-1/4
5-1/4
6-29/32
5/8
6†
6-5/8 REG.
6-5/8 REG.
3-1/2
6
7-7/8
3/4
UPPER BOX CONNECTION*
(API)
STANDARD
OPTIONAL
2-1/2
6-5/8 REG.
4-1/2 REG.
3
6-5/8 REG.
3-1/2
4-1/2 (NC50) - LOWER PIN CONNECTION OPTIONAL
NC56 - LOWER PIN CONNECTION OPTIONAL
*BOX - LEFT HAND CONNECTION; PIN - RIGHT HAND CONNECTION.
1
2
†NON-API
KELLY WEIGHTS
POUNDS PER FOOT
(Drive Section)
Square Kelly
ACROSS
BORE OF SQUARE KELLY
FLAT
1-1/16
1-1/4
2-1/2
18.3
17.1
25.8
3
3-1/2
1-1/2
1-3/4
24.0
21.8
35.6
33.5
2
2-1/4
31.0
28.2
2-1/2
2-3/4
2-7/8
44.7
41.3
39.3
73.5
71.6
47.9
4-1/4
5-1/4
3
3-1/4
69.7
65.5
3-1/2
89.6
6
Hexagon Kelly
ACROSS
BORE OF HEXAGON KELLY
FLAT
1-1/4
1-1/2
3
22.3
20.5
1-3/4
2
2-1/4
3-1/2
30.1
27.9
25.4
22.6
3-3/4
35.3
33.2
30.7
27.9
2-1/2
2-3/4
2-7/8
3
3-1/4
4-1/4
39.6
36.4
32.9
31.0
4-27/32
56.4
53.3
49.8
47.9
45.9
41.7
60.9
59.0
57.1
52.9
5-1/4
3-1/2
48.4
73.2
6
3-10
4
63.2
TADLOCK PIPE
MAXIMUM CONE DIMENSIONS
REED ROCK BIT COMPANY
MILLED TOOTH THREE CONE ROCK BITS
SIZE RANGE
3-3/4
3-7/8
4-5/8 – 4-3/4
5-7/8 – 6
6-1/8 – 6-1/4
6-1/2 – 6-5/8
6-3/4
7-5/8 – 7-3/4
7-7/8
8-3/8 – 8-5/8
8-3/4
9-1/2 – 9-5/8
9-7/8
10-5/8
11
12
12-1/4
13-1/2
13-3/4
14-3/4 – 15
17-1/2
18-1/2
A
1-27/32
1-27/32
2-1/4
2-53/64
3-1/32
3-11/64
3-9/32
3-23/32
3-31/32
4-13/64
4-7/32
4-27/32
4-15/16
5-9/32
5-7/32
5-7/8
6-1/32
6-53/64
6-53/64
7-5/16
8-3/4
9-1/32
B
2-31/64
2-35/64
3-1/16
3-53/64
4-1/32
4-17/64
4-25/64
4-59/64
5-17/64
5-45/64
5-55/64
6-25/64
6-29/64
7-1/64
7-21/64
7-3/4
8
8-27/32
9-1/16
9-57/64
11-9/32
11-25/32
MAXIMUM CONE DIMENSIONS
REED ROCK BIT COMPANY
INSERT TYPE THREE CONE ROCK BITS
SIZE RANGE
6-1/8 – 6-1/4
6-1/2 – 6-5/8
6-3/4
7-5/8 – 7-3/4
7-7/8
8-3/8 – 8-5/8
8-3/4
9-1/2 – 9-5/8
9-7/8
10-5/8
11
12
12-1/4
17-1/2
A
2-15/32
2-41/64
2-25/32
3-1/8
3-23/64
3-9/16
3-11/16
4-3/16
4-9/32
4-7/16
4-19/32
5-3/16
5-3/8
7-1/2
3-11
B
3-13/16
4-1/8
4-3/16
4-11/16
5-1/8
5-1/2
5-19/32
5-7/8
6-5/16
6-1/2
6-5/8
7-3/8
8
10-1/2
TADLOCK PIPE
MAXIMUM CONE DIMENSIONS
SMITH TOOL THREE CUTTER ROCK BITS
SIZE RANGE
5-5/8
5-7/8 – 6-1/4
6-1/2 – 6-3/4
7-3/8
7-5/8 – 8
8-1/8 – 8-1/2
8-5/8 – 9
9-1/8 – 9-1/2
9-5/8 – 9-7/8
10-1/2 – 11-1/2
12 – 12-1/4
13-3/4
15
17-1/2
26
A
2-7/8
3-7/64
3-13/32
4-45/64
3-31/32
4-1/8
4-17/32
4-9/32
4-15/16
5-27/64
6-1/8
7
7-5/8
8-1/2
12-5/8
B
3-13/16
4-3/16
4-35/64
4-27/32
5-17/64
5-26/32
6-1/32
6-13/32
6-41/64
7-5/32
7-61/64
9
9-5/8
11-3/8
15-3/4
MAXIMUM CONE DIMENSIONS
SMITH TOOL TWO-CONE ROCK BITS
SIZE RANGE
6-1/2 – 6-3/4
7-5/8 – 8
8-5/8 – 9
9-5/8 – 9-7/8
12 – 12-1/4
A
2-49/64
3-11/32
3-27/32
4-19/64
5-11/64
B
4-41/64
5-5/8
5-3/4
6-41/64
8-23/32
MAXIMUM CONE DIMENSIONS
HUGHES TOOL COMPANY ROCK BITS
SIZE
3-3/4
3-7/8
4-1/8
4-3/4
5-7/8
6
6-1/8
6-1/4
6-1/2
6-3/4
7-7/8
8-3/8
8-1/2
8-3/4
9-1/2
9-7/8
10-5/8
11
12-1/4
13-3/4
14-3/4
17-1/2
20
24
26
A
1-29/32
1-29/32
1-31/32
2-41/64
2-15/16
2-49/64
2-51/64
3-1/64
3-7/64
3-5/16
3-23/32
4-7/64
4-1/4
4-5/16
4-43/64
4-55/64
5-23/64
5-17/32
6-5/64
6-9/32
7-3/64
8-27/64
9-1/16
10-49/64
11-7/32
3-12
B
2-15/32
2-17/32
2-41/64
3-3/16
3-25/32
3-31/32
4-1/64
4-1/64
4-13/64
4-11/32
5-17/64
5-27/64
5-25/32
5-15/16
6-31/64
6-43/64
7
6-61/64
8-3/32
8-51/64
9-17/32
10-49/64
12-19/64
15-31/64
16-21/32
TADLOCK PIPE
API CASING — BIT SIZES AND CLEARANCES
DRILL BIT SPECIFICATIONS
CASING DATA
8 ROUND AND BUTTRESS CASING
CONN.
WEIGHT
ID 8 RD
UPSET ID
O.D.
T&C
& BUTT.
X-LINE
SIZE
API
WT.
(IN.)
LBS/FT
(IN.)
(IN.)
(IN.)
REG.
LBS.
9.50
4.090
--
3-7/8
10.50
4.052
--
3-7/8
11.60
4.000
--
13.50
3.920
11.50
X-LINE CASING
CLEARANCE
SIZE
CONN.
CLEARANCE
API
WT.
DEC.
FRAC.
(IN.)
REG.
LBS.
DEC.
FRAC.
.215
7/32
--
--
--
--
--
.177
11/64
--
--
--
--
--
3-7/8
.125
1/8
--
--
--
--
--
--
3-3/4
.170
11/64
--
--
--
--
--
4.560
--
4-1/4
.310
5/16
--
--
--
--
--
13.00
4.494
--
4-1/4
.244
1/4
--
--
--
--
--
15.00
4.408
4.198
4-1/4
.158
5/32
4-1/8
2-3/8
11
.073
5/64
18.00
4.276
4.198
4-1/8
.151
5/32
4-1/8
2-3/8
11
.073
5/64
14.00
5.012
--
4-3/4
2-7/8
16
.262
17/64
--
--
--
--
--
15.50
4.950
4.736
4-3/4
2-7/8
16
.200
13/64
4-5/8
2-7/8
16
.111
7/64
17.00
4.892
4.701
4-3/4
2-7/8
16
.142
9/64
4-5/8
2-7/8
16
.076
5/64
20.00
4.778
4.701
4-5/8
2-7/8
16
.153
5/32
4-5/8
2-7/8
16
.076
5/64
23.00
4.670
4.610
4-1/2
2-3/8
12
.170
11/64
4-1/2
2-3/8
12
.110
7/64
20.00
6.049
--
5-7/8
3-1/2
29
.174
17/64
--
--
--
--
--
24.00
5.921
5.781
5-5/8
3-1/2
24
.296
19/64
5-5/8
3-1/2
24
.156
5/32
28.00
5.791
5.731
5-5/8
3-1/2
24
.166
11/64
5-5/8
3-1/2
24
.106
7/64
32.00
5.675
5.615
4-3/4
2-7/8
15
.925
59/64
4-3/4
2-7/8
15
.865
55/64
17.00
6.538
--
6-1/4
30
.288
9/32
--
--
--
--
--
20.00
6.456
--
6-1/4
30
.206
13/64
--
--
--
--
--
23.00
6.366
6.171
6-1/8
30
.241
1/4
6-1/8
3-1/2
30
.046
3/64
26.00
6.276
6.171
6-1/8
30
.151
5/32
6-1/8
3-1/2
30
.046
3/64
29.00
6.184
6.123
6
29
.184
3/16
6
3-1/2
29
.123
1/8
32.00
6.094
6.032
6
29
.219
7/32
5-7/8
3-1/2
29
.157
5/32
35.00
6.004
5.940
5-7/8
29
.129
1/8
5-7/8
3-1/2
29
.065
1/16
38.00
5.920
5.860
5-7/8
24
.295
3/64
5-5/8
3-1/2
DIAMETRICAL CLEARANCES LISTED ABOVE ARE BASED ON THE INSIDE DIAMETER OF CASING (OR JOINT ID FOR X-LINE CASING.)
CASING LISTED FROM API SPEC 5A, TABLE 1.1, MARCH 1979.
24
.235
15/64
4-1/2
5
5-1/2
6-5/8
7
2-3/8
2-3/8
3-1/2
10
11
3-13
TADLOCK PIPE
API CASING — BIT SIZES AND CLEARANCES
DRILL BIT SPECIFICATIONS
CASING DATA
8 ROUND AND BUTTRESS CASING
CONN.
X-LINE CASING
WEIGHT
ID 8 RD
UPSET ID
O.D.
T&C
& BUTT
X-LINE
SIZE
API
WT.
(IN.)
LBS/FT
(IN.)
(IN.)
(IN.)
REG.
LBS.
DEC.
FRAC.
24.00
7.025
--
6-3/4
45
.275
9/32
26.40
6.969
6.770
6-3/4
45
.219
7/32
29.70
6.875
6.770
6-5/8
38
.250
33.70
6.765
6.705
6-5/8
38
.140
39.00
6.625
6.565
6-1/4
30
.375
24.00
8.097
--
7-7/8
4-1/2
73
28.00
8.017
--
7-7/8
4-1/2
32.00
7.921
7.725
7-5/8
36.00
7.825
7.725
40.00
7.725
7.663
44.00
7.625
49.00
7.511
32.30
7-5/8
8-5/8
9-5/8
10-3/4
11-3/4
CLEARANCE
SIZE
CONN.
CLEARANCE
API
WT.
REG.
LBS.
DEC.
--
--
--
--
6-5/8
3-1/2
38
.145
9/64
1/4
6-5/8
3-1/2
38
.145
9/64
9/64
6-5/8
3-1/2
38
.085
5/64
3/8
6-1/4
3-1/2
30
.315
5/16
.222
7/32
--
--
--
--
--
73
.142
9/64
--
--
--
--
--
4-1/2
68
.271
17/64
7-5/8
4-1/2
68
.100
3/32
7-5/8
4-1/2
68
.200
13/64
7-5/8
4-1/2
68
.100
3/32
6-3/4
3-1/2
42
.975
31/32
6-3/4
3-1/2
42
.913
29/32
7.565
6-3/4
3-1/2
42
.875
7/8
6-3/4
3-1/2
42
.815
13/16
7.451
6-3/4
3-1/2
42
.761
49/64
6-3/4
3-1/2
42
.706
45/64
9.001
--
8-3/4
90
.251
1/4
--
--
--
--
--
36.00
8.921
--
8-3/4
90
.171
11/64
--
--
--
--
--
40.00
8.835
8.665
8-5/8
89
.210
13/64
8-1/2
4-1/2
86
.165
11/64
43.50
8.755
8.665
8-1/2
86
.255
1/4
8-1/2
4-1/2
86
.165
11/64
47.00
8.681
8.621
8-1/2
86
.181
3/16
8-1/2
4-1/2
86
.121
1/8
53.50
8.535
8.475
8-3/8
86
.160
5/32
8-3/8
4-1/2
86
.100
7/64
32.75
10.192
--
9-7/8
5-1/2
135
.317
5/16
--
--
--
--
--
40.50
10.050
--
9-7/8
OR
135
.175
11/64
--
--
--
--
--
45.50
9.950
9.719
9-5/8
6-5/8
135
.325
21/64
9-5/8
6-5/8
135
.094
3/32
51.00
9.850
9.629
9-5/8
4-1/2
135
.225
7/32
9-1/2
6-5/8
135
.129
1/8
55.50
9.760
9.629
9-1/2
4-1/2
135
.260
17/64
9-1/2
6-5/8
135
.129
1/8
42.00
11.084
--
10-5/8
145
.459
29/64
47.00
11.000
--
10-5/8
145
.375
3/8
54.00
10.880
--
10-5/8
145
.255
1/4
60.00
10.772
--
10-5/8
145
.147
5/32
3-1/2
4-1/2
6-5/8
(IN.)
DIAMETRICAL CLEARANCES LISTED ABOVE ARE BASED ON THE INSIDE DIAMETER OF CASING (OR JOINT ID FOR X-LINE CASING).
CASING LISTED FROM API SPEC 5A, TABLE 1.1, MARCH 1979.
3-14
(NO X-LINE IN THIS SIZE)
FRAC.
TADLOCK PIPE
API CASING — BIT SIZES AND CLEARANCES
CASING DATA
DRILL BIT SPECIFICATIONS
WEIGHT
CONN.
CLEARANCE
O.D.
T&C
I.D.
SIZE
API
WT.
(IN.)
LBS/FT
(IN.)
(IN.)
REG.
LBS
DEC.
FRAC.
48.00
12.715
12-1/4
211
.465
15/32
54.50
12.615
12-1/4
211
.365
23/64
61.00
12.515
12-1/4
211
.265
17/64
68.00
12.415
12-1/4
211
.165
11/64
72.00
12.347
12
201
.347
11/32
65.00
15.250
15
6-5/8
.250
1/4
75.00
15.125
14-3/4
OR
84.00
15.010
14-3/4
7-5/8
87.50
17.755
17-1/2
13-3/8
16
18-5/8
6-5/8
6-5/8
300
500
.375
3/8
.260
17/64
.255
1/4
.624
5/8
OR 7-5/8
20
94.00
19.124
18-1/2
6-5/8
106.50
19.000
18-1/2
OR
133.00
18.730
18-1/2
7-5/8
615
*DIAMETRICAL CLEARANCES LISTED ABOVE ARE BASED ON THE INSIDE DIAMETER OF CASING (OR JOINT ID FOR X-LINE CASING).
3-15
.500
1/2
.230
15/64
TADLOCK PIPE
TUBING
API TUBING REQUIREMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SETTING DEPTHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . API-T&C NON-UPSET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AZTEC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . API-T&C EXTERNAL UPSET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . API-INTEGRAL JOINT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ARMCO NU-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ARMCO SEAL-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ARMCO I-J NU-LOCK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HYDRIL
CS& CS-CB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-95 & A-95-CB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PH-4 & PH-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NL ATLAS BRADFORD
DSS-HTC & IJ-3SS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IJ-4S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TC-4S. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FL-4S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . QUANEX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . REED RTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VALLOUREC VAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MINI-VAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USS IMPROVED BUTTRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . WHEELING-PITTSBURGH
SEAMLESS 8-ACME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LINE PIPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . STANDARD STEEL PIPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2
3-4
3-4
5-6
5-6
7-8
7-8
9-10
11-12
11-12
13-14
15-16
17-18
19-20
21-22
23-24
25-26
27-28
27-28
29-30
29-30
31
31
TADLOCK PIPE
API TUBING REQUIREMENTS
DRIFT TEST
TUBING SIZE
DRIFT MANDREL LENGTH
DRIFT MANDREL DIAMETER
2-7/8” AND SMALLER
42”
ID MINUS 3/32”
3-1/2” AND LARGER
42”
ID MINUS 1/8”
TENSILE REQUIREMENTS
TENSILE STRENGTH
YIELD STRENGTH
GRADE
MIN. PSI
MAX. PSI
MINIMUM PSI
H-40
40000
80000
60000
J-55
55000
80000
75000
C-75
75000
90000
95000
L-80
80000
95000
95000
N-80
80000
110000
100000
P-105
105000
135000
120000
RANGE LENGTHS
RANGE 1
RANGE 2
RANGE 3
(FT.)
(FT.)
(FT.)
TOTAL RANGE LENGTH, INCL
20–24
28–32
---
PERMISSIBLE VARIATION, MAX
2
2
---
RANGE LENGTH FOR 100% OF CARLOAD: PERMISSIBLE LENGTH, MIN.
20
28
---
TOLERANCES
TUBING SIZE
TYPE
DIMENSION
2-3/8 – 3-1/2
4
EUE
4-1/2
4” AND SMALLER
TOLERANCE
+3/32” – 1/32
+7/64” – 1/32
O.D.
+7/64” – .75% O.D.
NUE
+.031 – .031
4-1/2 & LARGER
+.75% O.D. – .75% O.D.
ALL
---
WALL THICKNESS
– 12.5%
SIZES
---
I.D.
GOVERNED BY O.D. TOLERANCES
4-1
TADLOCK PIPE
SETTING DEPTHS FOR EXTERNAL UPSET TUBING
BARRELS†
SETTING DEPTH (FEET) EXTERNAL UPSET*
SIZE
O.D.
WALL
NOM.
(IN.)
(IN.)
COLLAPSE
TENSION
COLLAPSE
TENSION
3/4
1.050
0.113
16,900
15,260
24,590
22,200
0.065
1
1.315
0.133
16,000
15,090
23,280
21,960
0.107
1-1/4
1.660
0.140
13,580
15,310
19,780
22,270
0.185
1-1/2
1.900
0.145
12,400
15,150
18,050
22,040
2
2.375
0.190
12,960
15,260
18,850
22,200
24,740
29,130
0.386
2
2.375
0.254
---
---
24,450
22,750
32,100
29,860
0.338
2-1/2
2.875
0.217
12,290
15,330
17,860
22,300
22,420
29,290
0.578
2-1/2
2.875
0.308
---
---
24,480
22,830
32,140
29,970
0.495
3
3.500
0.254
11,840
15,310
16,850
22,270
20,880
29,230
0.868
3
3.500
0.375
---
---
24,500
22,730
32,140
29,840
0.734
3-1/2
4.000
0.262
10,540
15,370
14,080
22,360
---
---
1.172
4
4.500
0.271
9,150
15,520
12,000
22,580
---
---
1.520
J-55
N-80
PER
P-105
COLLAPSE
TENSION
100 FEET
0.251
*NO SAFETY FACTOR. TENSION VALUES ARE IN AIR. COLLAPSE VALUES ARE IN 90#/CU.FT. (12#/GAL) MUD.
†
42 GALLONS PER BARREL.
SETTING DEPTHS FOR NON-UPSET TUBING
BARRELS†
SETTING DEPTH (FEET) NON-UPSET*
SIZE
O.D.
WALL
NOM.
(IN.)
(IN.)
COLLAPSE
TENSION
COLLAPSE
TENSION
3/4
1.050
0.113
16,900
7,600
24,590
11,140
0.065
1
1.315
0.133
16,000
8,850
23,280
12,880
0.107
1-1/4
1.660
0.140
13,580
9,280
19,780
13,520
0.185
1-1/2
1.900
0.145
12,400
9,540
18,050
13,890
2
2.375
0.190
12,960
10,750
18,850
15,630
24,740
20,520
0.386
2
2.375
0.254
---
---
24,450
17,740
32,100
22,490
0.338
2-1/2
2.875
0.217
12,290
11,340
17,860
16,480
22,420
21,630
0.578
2-1/2
2.875
0.308
---
---
24,480
18,520
32,140
24,300
0.495
3
3.500
0.254
11,840
11,880
16,850
18,140
---
---
0.868
3
3.500
0.375
---
---
24,500
19,390
32,140
25,440
0.734
3-1/2
4.000
0.262
8,200
10,420
10,570
15,150
---
---
1.172
4
4.500
0.271
9,150
11,380
12,000
16,560
---
---
1.520
J-55
N-80
*NO SAFETY FACTOR. TENSION VALUES ARE IN AIR. COLLAPSE VALUES ARE IN 90#/CU.FT. (12#/GAL) MUD.
†
42 GALLONS PER BARREL.
4-2
PER
P-105
COLLAPSE
TENSION
100 FEET
0.251
TADLOCK PIPE
DIMENSIONAL DATA
API TUBING - T & C
NON-UPSET
API
WEIGHT
WALL
DRIFT
PIN
SIZE-O.D.
T&C
I.D.
THICKNESS
DIAMETER
LENGTH
O.D.
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
3/4 (1.050)
1.14
.824
.113
.730
1.094
1.313
3-3/16
COUPLING
LENGTH
1 (1.315)
1.70
1.049
.133
.955
1.125
1.660
3-1/4
1-1/4 (1.660)
2.30
1.380
.140
1.286
1.250
2.054
3-1/2
1-1/2 (1.900)
2.75
1.610
.145
1.516
1.375
2.200
3-3/4
4.00
2.041
.167
1.947
1.625
2.875
4-1/4
4.60
1.995
.190
1.901
1.625
2.875
4-1/4
5.80
1.867
.254
1.773
1.625
2.875
4-1/4
6.40
2.441
.217
2.347
2.063
3.500
5-1/8
8.60
2.259
.308
2.165
2.063
3.500
5-1/8
7.70
3.068
.216
2.943
2.313
4.250
5-5/8
9.20
2.992
.254
2.797
2.313
4.250
5-5/8
10.20
2.922
.289
2.797
2.313
4.250
5-5/8
12.70
2.750
.375
2.625
2.313
4.250
5-5/8
4
9.50
3.548
.226
3.423
2.375
4.750
5-3/4
4-1/2
12.60
3.958
.271
3.833
2.563
5.200
6-1/8
2-3/8
2-7/8
3-1/2
*THREADS CUT WITH 3/4” TAPER PER FOOT.
10 THREADS PER INCH EXCEPT FOR 4” AND 4-1/2” TUBING, WHICH HAVE 8 PER INCH.
AZTEC INTEGRAL JOINT
CONNECTION
API
WEIGHT
WALL
SIZE O.D.
INT. JT.
I.D.
THICK.
(IN.)
(LB/FT)
(IN.)
(IN.)
1 (1.315)
1.8
1.049
1-1/4 (1.660)
2.4
1.380
1-1/2 (1.900)
2.9
2-1/16
3.25
DRIFT
DIAMETER LENGTH
O.D.
I.D.
(IN.)
(IN.)
(IN.)
(IN.)
.133
.955
1.125
1.552
.970
.140
1.286
1.250
1.883
1.300
1.610
.145
1.516
1.375
2.113
1.530
1.751
.156
1.656
1.438
2.330
1.690
THREADS CUT WITH 3/4” TAPER PER FOOT.
10 THREADS PER INCH.
1” INTERCHANGEABLE WITH 3/4” API EUE OR 1” NON-UPSET.
1-1/4” INTERCHANGEABLE WITH 1-1/4” NON-UPSET.
1-1/2” INTERCHANGEABLE WITH 1-1/2” API NON-UPSET.
2-1/16” INTERCHANGEABLE WITH 1-1/2” API EUE.
4-3
PIN
TADLOCK PIPE
PERFORMANCE PROPERTIES
API TUBING - T & C
NON-UPSET
COLLAPSE PRESSURE
BURST PRESSURE
OPTIMUM MAKE-UP
JOINT YIELD STRENGTH
TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
J-55
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
N-80
P-105
10,560
15,370
---
10,360
15,070
---
8,700
12,700
---
180
250
---
10,000
14,550
---
9,730
14,160
---
15,100
21,900
---
270
380
---
8,500
12,360
---
8,120
11,800
---
21,400
31,100
---
350
490
---
7,750
11,280
---
7,350
10,680
---
26,300
38,200
---
410
570
---
7,190
9,980
---
6,770
9,840
---
41,400
60,200
---
610
850
---
8,100
11,780
15,460
7,700
11,200
14,700
49,500
71,900
94,400
730
1020
1280
(FT-LBS)
---
15,280
20,060
---
14,970
19,650
---
102,900
135,100
---
1460
1840
7,680
11,170
14,010
7,260
10,570
13,870
72,600
105,500
138,500
1050
1470
1850
---
15,300
20,090
---
15,000
19,690
---
159,300
209,100
---
2210
2790
5,970
7,870
---
5,940
8,640
---
89,500
130,100
---
1210
1700
---
7,400
10,530
13,050
6,980
10,160
13,340
109,400
159,000
208,800
1480
2070
2620
8,330
12,120
---
7,950
11,560
---
127,300
185,100
---
1723
2410
---
---
15,310
20,090
---
15,000
19,690
---
246,300
323,300
---
3210
4060
5,110
6,590
---
5,440
7,910
---
99,000
144,000
---
1240
1740
---
5,720
7,500
---
5,790
8,440
---
143,500
208,700
---
1740
2440
---
AZTEC INTEGRAL JOINT
COLLAPSE PRESSURE
BURST PRESSURE
OPTIMUM
JOINT YIELD STRENGTH
MAKE-UP
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
TORQUE*
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
(FT-LBS)
10,000
14,550
19,090
9,730
14,160
18,580
25,400
36,300
47,700
350
8,500
12,360
16,220
8,120
11,800
15,500
34,500
50,200
65,900
375
7,750
11,280
14,290
7,350
10,680
14,020
42,200
61,400
80,500
425
7,690
11,180
14,060
7,290
10,590
13,890
51,390
74,750
98,110
450
*APPLIES TO ALL GRADES.
4-4
TADLOCK PIPE
DIMENSIONAL DATA
API TUBING - T & C
EXTERNAL UPSET
COUPLING
API
WEIGHT
WALL
DRIFT
UPSET
PIN
O.D.
SIZE-O.D.
T&C
I.D.
THICK.
LENGTH
REG.
SP.CL.
(IN.)
(LB./FT.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
3/4 (1.050)
1.20
.824
.113
.730
1.315
1.125
1.660
---
3-1/4
DIAMETER DIAMETER
LENGTH
1 (1.315)
1.80
1.049
.133
.955
1.469
1.250
1.900
---
3-1/2
1-1/4 (1.660)
2.40
1.380
.140
1.286
1.812
1.375
2.200
---
3-3/4
1-1/2 (1.900)
2.90
1.610
.145
1.516
2.093
1.438
2.500
---
3-7/8
4.70
1.995
.190
1.901
2.593
1.938
3.063
5.95
1.867
.254
1.773
2.593
1.938
3.063
6.50
2.441
.217
2.347
3.093
2.125
3.668
8.70
2.259
.308
2.165
3.093
2.125
3.668
9.30
2.992
.254
2.867
3.750
2.375
4.500
3-1/2
12.95
2.750
.375
2.625
3.750
2.375
4.500
4.180
4
11.00
3.476
.262
3.351
4.250
2.500
5.000
---
6
4-1/2
12.75
3.958
.271
3.833
4.750
2.625
5.563
---
6-1/4
2-3/8
2-7/8
4-7/8
2.910
4-7/8
5-1/4
3.460
5-1/4
5-3/4
5-3/4
THREADS CUT WITH 3/4” TAPER PER FOOT.
10 THREADS PER INCH FROM 3/4” THRU 1-1/2” TUBING.
8 THREADS PER INCH FROM 2-3/8” THRU 4-1/2” TUBING.
API INTEGRAL JOINT TUBING
CONNECTION
API
WEIGHT
WALL
SIZE-O.D.
INT.JT.
I.D.
THICK.
(IN.)
(LB/FT)
(IN.)
(IN.)
1 (1.315)
1.72
1.049
2.10
1.410
2.33
2.40
1-1/2 (1.900)
2-1/16*
1-1/4 (1.660)
DRIFT
PIN
DIAMETER LENGTH
O.D.
I.D.
(IN.)
(IN.)
(IN.)
(IN.)
.133
.955
1.125
1.550
.970
.125
1.316
1.250
1.880
1.301
1.380
.140
1.286
1.250
1.880
1.301
1.650
.125
1.556
1.375
2.110
1.531
2.76
1.610
.145
1.516
1.375
2.110
1.531
3.25
1.751
.156
1.656
1.438
2.325
1.672
THREADS CUT WITH 3/4” TAPER PER FOOT.
10 THREADS PER INCH.
1” INTERCHANGEABLE WITH 3/4” API EUE OR 1” NUE
1-1/4” INTERCHANGEABLE WITH 1-1/4” API NUE
1-1/2” INTERCHANGEABLE WITH 1-1/2” API NUE
2-1/16” INTERCHANGEABLE WITH 1-1/2” API EUE
*2-1/16 SIZE HAS A 2.094 UPSET O.D. ON THE PIN, ALL OTHER SIZES HAVE FLUSH O.D.S
4-5
TADLOCK PIPE
PERFORMANCE PROPERTIES
API TUBING - T & C
EXTERNAL-UPSET
COLLAPSE PRESSURE
PIPE*
BURST PRESSURE
OPTIMUM MAKE-UP
TENSILE YIELD STRENGTH*
TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
J-55
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
N-80
P-105
10,560
15,370
---
10,360
15,070
---
18,290
26,610
---
600
830
---
10,000
14,550
---
9,730
14,160
---
27,610
39,510
---
570
790
---
8,500
12,360
---
8,120
11,800
---
36,770
53,480
---
690
960
---
7,750
11,280
---
7,350
10,680
---
43,970
63,960
---
880
1220
---
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
1290
1800
2270
(FT.-LBS)
---
15,280
20,060
---
14,970
19,650
---
135,400
177,710
---
2240
2830
7,680
11,170
14,010
7,260
10,570
13,870
99,660
144,960
190,260
1650
2300
2910
---
15,300
20,090
---
15,000
19,690
---
198,710
260,810
---
3020
3810
7,400
10,530
13,050
6,980
10,160
13,340
142,460
207,220
271,970
2280
3200
4050
---
15,310
20,090
---
15,000
19,690
---
294,530
386,570
---
4290
5430
6,590
8,800
---
6,300
9,170
---
169,220
246,140
---
2560
4560
---
5,720
7,500
---
5,790
8,440
---
198,030
288,040
---
2860
4020
---
*JOINT EFFICIENCY 100% OR BETTER.
API INTEGRAL JOINT TUBING
COLLAPSE PRESSURE
BURST PRESSURE
JOINT YIELD STRENGTH
OPTIMUM MAKE-UP TORQUE
H-40
J-55
N-80
H-40
J-55
N-80
H-40
J-55
N-80
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
7,270
10,000
14,550
7,080
9,730
14,160
15,970
21,960
31,940
310
400
5,570
7,660
---
5,270
7,250
---
22,180
30,500
---
380
500
---
6,180
8,500
12,360
5,900
8,120
11,810
22,180
30,500
44,370
380
500
690
4,920
6,640
---
4,610
6,330
---
26,890
36,970
---
450
580
---
5,640
7,750
11,280
5,340
7,350
10,680
26,890
36,970
53,780
450
580
810
5,590
7,690
11,180
5,290
7,290
10,590
35,690
49,000
71,370
570
740
1030
4-6
H-40
J-55
N-80
(FT.-LBS)
550
TADLOCK PIPE
DIMENSIONAL DATA
ARMCO NU-LOCK TUBING
API
SIZE
COUPLING
WEIGHT
WALL
DRIFT
UPSET
O.D.
O.D.
T&C
I.D.
THICKNESS
DIAMETER
O.D.
REG.
SP.CL.
LENGTH
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
4.70
1.995
.190
1.901
2.700
2.875
2.700
5.95
1.867
.254
1.773
2.700
2.875
---
6.20
1.853
.261
1.759
2.700
2.875
---
7.70
1.703
.336
1.609
2.700
2.875
---
6.50
2.441
.217
2.347
3.220
3.500
3.200
7.90
2.323
.276
2.229
3.220
3.500
---
8.70
2.259
.308
2.165
3.220
3.500
---
9.50
2.195
.340
2.101
3.220
3.500
---
11.00
2.065
.405
1.971
3.220
3.500
---
9.30
2.992
.254
2.867
3.865
4.250
3.865
10.30
2.922
.289
2.797
3.865
4.250
---
12.95
2.750
.375
2.625
3.865
4.250
---
15.50
2.602
.449
2.477
3.865
4.250
---
16.70
2.480
.510
2.355
3.865
4.250
---
2-3/8
2-7/8
3-1/2
5.75
6.50
7.00
THREADS CUT WITH 1” TAPER PER FOOT.
6 THREADS PER INCH.
ARMCO SEAL-LOCK TUBING
API
COUPLING
SIZE
WEIGHT
WALL
DRIFT
O.D.
O.D.
T&C
I.D.
THICK.
DIAMETER
REG.
SP.CL.
LENGTH
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
4.60
1.995
.190
1.901
2.875
2.700
5.80
1.867
.254
1.773
2.875
---
6.40
2.441
.217
2.347
3.500
3.220
8.60
2.259
.308
2.165
3.500
---
9.20
2.992
.254
2.867
4.250
3.865
12.70
2.750
.375
2.625
4.250
---
2-3/8
2-7/8
3-1/2
THREADS CUT WITH 1” TAPER PER FOOT.
6 THREADS PER INCH.
4-7
6.00
6.75
7.25
TADLOCK PIPE
PERFORMANCE PROPERTIES
ARMCO NU-LOCK TUBING
COLLAPSE PRESSURE
OPTIMUM
PIPE
BURST PRESSURE
MAKE-UP
TENSILE YIELD STRENGTH*
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
TORQUE†
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
(FT.LBS)
8100
11780
15460
7700
11200
14700
71730
104340
136940
10510
15280
20060
10290
14970
19650
93090
135400
177710
10760
15650
20540
10580
15390
20200
95300
139000
182000
13360
19430
25510
19810
26010
118400
172000
226000
7680
11170
14010
7260
10570
13870
99660
144960
190260
9550
13890
18230
9250
13450
17650
124000
180000
236000
10530
15300
20090
10320
15000
19690
136000
198710
260810
11470
16690
21900
11390
16560
21730
148000
217000
284000
13310
19360
25410
13570
19730
25890
172000
251000
330000
7400
10530
13050
6980
10160
13330
142460
207220
271970
8330
12120
15920
7950
11560
15180
160000
233000
306000
10530
15310
20090
10320
15000
19690
202000
294530
386570
12300
17890
23480
12350
17690
23570
236720
344320
451920
13690
19920
26140
14020
20400
26770
263500
383300
503100
1200
1800
2500
*JOINT EFFICIENCY 100% OR MORE.
†
APPLIES TO ALL GRADES
ARMCO SEAL-LOCK TUBING
COLLAPSE PRESSURE
BURST PRESSURE
PIPE*
OPTIMUM
TENSILE YIELD STRENGTH*
MAKE-UP-
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
TORQUE†
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
(FT.-LBS)
8100
11780
15460
7700
11200
14700
71700
104300
136900
---
15280
20060
---
14970
19650
---
135400
177700
7680
11160
14010
7260
10570
13870
99600
144900
190200
---
15300
20090
---
15000
19680
---
198700
260000
7400
10530
13050
6980
10160
13330
142400
207200
271900
15310
20090
---
15000
19690
---
294500
386500
*JOINT EFFICIENCY 100% OR MORE.
†
APPLIES TO ALL GRADES
4-8
1000
1200
1800
TADLOCK PIPE
DIMENSIONAL DATA
ARMCO I-J NU-LOCK
API
SIZE
CONNECTION
WEIGHT
WALL
DRIFT
PIN
O.D.
T&C
I.D.
THICKNESS
DIAMETER
LENGTH
O.D.
I.D.
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
4.70
1.995
.190
1.901
2.438
2.700
1.948
5.30
1.939
.218
1.845
2.438
2.750
1.892
5.95
1.867
.254
1.773
2.438
2.800
1.820
6.50
2.441
.217
2.347
2.813
3.220
2.394
7.90
2.323
.276
2.229
2.813
3.375
2.276
8.70
2.259
.308
2.165
2.813
3.375
2.212
9.50
2.195
.340
2.101
2.813
3.450
2.148
11.00
2.065
.405
1.971
2.813
3.500
2.018
11.65
1.995
.440
1.901
2.813
3.500
1.948
9.30
2.992
.254
2.867
3.063
3.900
2.927
10.30
2.922
.289
2.797
3.063
3.950
2.857
12.95
2.750
.375
2.625
3.063
4.250
2.685
15.80
2.548
.476
2.423
3.063
4.250
2.483
16.70
2.480
.510
2.355
3.063
4.250
2.415
2-3/8
2-7/8
3-1/2
THREAD CUT WITH 1” TAPER PER FOOT.
6 THREADS PER INCH.
4-9
TADLOCK PIPE
PERFORMANCE PROPERTIES
ARMCO I-J NU-LOCK
COLLAPSE PRESSURE
J-55
N-80
P-105
J-55
N-80
OPTIMUM
PIPE*
BURST PRESSURE
MAKE-UP
TENSILE YIELD STRENGTH*
P-105
J-55
N-80
P-105
TORQUE†
(FT.-LBS)
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
9,170
13,340
17,510
8,840
12,860
16,870
81,250
118,180
155,110
10,510
15,280
20,060
10,290
14,970
19,650
93,090
135,400
177,710
7,680
11,170
14,010
7,260
10,570
13,870
99,660
144,960
190,260
9,550
13,890
18,230
9,250
13,450
17,650
123,940
180,280
236,620
10,530
15,300
20,090
10,320
15,000
19,690
136,610
198,710
260,810
11,470
16,690
21,900
11,390
16,560
21,730
148,900
216,620
284,310
13,310
19,360
25,410
13,570
19,730
25,890
172,800
251,400
330,000
14,260
20,740
27,220
14,730
21,430
28,120
185,130
269,270
353,420
7,400
10,530
13,050
6,980
10,160
13,340
142,460
207,220
271,970
8,330
12,120
15,920
7,950
11,560
15,180
160,340
233,230
306,110
10,530
15,310
20,090
10,320
15,000
19,690
202,490
294,530
386,570
12,930
18,800
24,680
13,090
19,040
24,990
248,710
361,770
474,820
13,690
19,920
26,140
14,020
20,400
26,770
263,480
383,250
503,020
*JOINT EFFICIENCY 100% OR MORE.
†
APPLIES TO ALL GRADES.
4-10
1500
2000
2500
TADLOCK PIPE
DIMENSIONAL DATA
HYDRIL TUBING CS & CS-CB
CONNECTION
WALL
DRIFT
PIN
I.D.
THICKNESS
DIAMETER
LENGTH
REG.
SP.CL.
I.D.
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
1.20
.824
.113
.672
1.327
1.300
.687
1.50
.742
.154
.648
1.327
---
.687
1.80
1.049
.133
.955
1.552
1.525
.970
2.25
.957
.179
.848
1.600
---
.864
2.40
1.380
.140
1.286
1.883
1.858
1.300
3.02
1.278
.191
1.184
1.927
---
1.218
3.24
1.264
.198
1.170
1.927
---
1.200
2.90
1.610
.145
1.516
2.113
2.094
1.530
3.64
1.500
.200
1.406
2.162
---
1.440
4.19
1.462
.219
1.368
2.179
---
1.390
3.25
1.751
.156
1.657
2.335
2.295
1.700
4.50
1.613
.225
1.519
2.187
2.460
2.407
1.550
4.70
1.995
.190
1.901
2.272
2.705
2.655
1.945
2-3/8
5.30
1.939
.218
1.845
2.260
2.750
2.700
1.890
2-7/8
6.50
2.441
.217
2.347
2.338
3.220
3.166
2.371
9.30
2.992
.254
2.867
2.788
3.915
3.859
2.920
3-1/2
10.30
2.922
.289
2.797
2.786
3.980
3.914
2.878
4
11.00
3.476
.262
3.351
2.769
4.417
4.359
3.395
12.75
3.958
.271
3.833
2,821
4.920
4.861
3.865
13.50
3.920
.290
3.795
2,820
4.955
4.890
3.840
API
WEIGHT
SIZE-O.D.
INT.JT.
(IN.)
3/4 (1.050)
1 (1.315)
1-1/4 (1.660)
1-1/2 (1.900)
2-1/16
4-1/2
2.187
2.187
2.187
2.187
O.D.
8 THREADS PER INCH.
INTERCHANGEABLE WITH HYDRIL A-95 AND A-95-CB.
HYDRIL TUBING A-95 & A-95-CB
CONNECTION
WALL
DRIFT
PIN
I.D.
THICKNESS
DIAMETER
LENGTH
REG.
SP.CL
I.D.
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
1-1/4 (1.660)
2.4
1.380
.140
1.286
2.197
1.898
1.858
1.300
1-1/2 (1.900)
2.9
1.610
.145
1.516
2.197
2.134
2.094
1.530
2-1/16
3.25
1.751
.156
1.656
2.204
2.325
2.300
1.700
2-3/8
4.7
1.995
.190
1.901
2.276
2.700
2.630
1.945
2-7/8
6.5
2.441
.217
2.347
2.348
3.220
3.155
2.375
3-1/2
9.3
2.992
.254
2.867
2.797
3.905
3.805
2.920
4
11
3.476
.262
3.351
2.794
4.405
4.315
3.395
4-1/2
12.75
3.958
.271
3.833
2.843
4.910
4.825
3.865
API
WEIGHT
SIZE-O.D.
INT.JT.
(IN.)
8 THREADS PER INCH.
INTERCHANGEABLE WITH HYDRIL CS AND CS-CB.
4-11
O.D.
TADLOCK PIPE
PERFORMANCE PROPERTIES
HYDRIL TUBING
CS & CS-CB
COLLAPSE PRESSURE
PIPE*
BURST PRESSURE
TENSILE YIELD STRENGTH*
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
J-55
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
N-80
P-105
10,560
15,370
20,170
10,360
15,070
19,780
18,290
26,610
34,920
200
300
300
13,770
20,020
26,280
14,120
20,530
26,590
23,840
34,680
45,510
200
300
300
10,000
14,550
19,090
9,730
14,160
18,580
27,610
39,510
51,860
300
400
400
12,940
18,820
24,700
13,100
19,060
25,010
35,140
51,110
67,080
300
400
400
8,500
12,360
16,220
8,120
11,800
15,500
36,770
53,480
70,200
400
600
600
11,200
16,290
21,380
11,070
16,110
21,140
48,480
70,500
92,550
400
600
600
11,560
16,810
22,060
11,480
16,700
21,920
50,020
72,750
95,490
400
600
600
7,750
11,280
14,290
7,350
10,680
14,020
43,970
63,960
83,940
600
800
800
10,360
15,070
19,780
10,130
14,740
19,340
58,750
85,450
112,150
600
800
800
11,220
16,320
21,420
11,090
16,140
21,180
63,600
92,500
121,430
600
800
800
7,690
11,180
14,060
7,290
10,590
13,890
51,390
74,750
98,110
700
900
900
10,690
15,550
20,410
10,500
15,270
20,050
71,430
103,900
136,380
700
900
900
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136, 940
1100
1500
1500
9,170
13,340
17,510
8,840
12,860
16,870
81,250
118,180
155,110
1100
1500
1500
7,680
11,170
14,010
7,260
10,570
13,870
99,660
144,960
190,260
1500
2100
2100
7,400
10,530
13,050
6,980
10,160
13,340
142,460
207,220
271,970
2500
3000
3000
8,330
12,120
15,920
7,950
11,560
15,180
160,340
233,230
306,110
2500
3000
3000
6,590
8,800
10,700
6,300
9,170
12,040
169,220
246,140
323,060
3000
3500
3500
5,720
7,500
8,950
5,790
8,440
11,070
198,030
288,040
378,050
3500
4500
4500
6,420
8,540
10,350
*JOINT EFFICIENCY 100% OR MORE.
6,200
9,020
11,840
211,000
306,850
402,740
3500
4500
4500
(FT.-LBS)
HYDRIL TUBING
A-95 & A-95-CB
COLLAPSE PRESSURE
BURST PRESSURE
JOINT YIELD STRENGTH
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
8,500
12,360
16,220
8,120
11,800
15,500
32,000
46,000
61,000
400
600
7,750
11,280
14,290
7,350
10,680
14,020
37,000
53,000
70,000
600
800
---
7,690
11,180
14,060
7,290
10,590
13,890
49,000
71,000
93,000
700
900
900
8,100
11,780
15,460
7,700
11,200
14,700
68,000
98,000
129,000
1100
1500
1500
7,680
11,170
14,010
7,260
10,570
13,870
88,000
128,000
168,000
1500
2100
2100
7,400
10,530
13,050
6,980
10,160
13,340
133,000
194,000
254,000
2500
3000
3000
6,590
8,800
10,700
6,300
9,170
12,040
155,000
226,000
297,000
3000
3500
3500
5,720
7,500
8,950
5,790
8,440
11,070
179,000
260,000
342,000
3500
4500
4500
4-12
J-55
N-80
P-105
(FT.-LBS)
---
TADLOCK PIPE
DIMENSIONAL DATA
HYDRIL TUBING
PH-4* & PH-6
CONNECTION
WALL
DRIFT
PIN
I.D.
THICKNESS
DIAMETER
LENGTH
REG.
SP.CL.
I.D.
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
5.95
1.867
.254
1.773
2.978
2.906
2.782
1.805
6.2
1.853
.261
1.759
2.969
2.938
2.794
1.795
7.7
1.703
.336
1.609
2.936
3.125
3.002
1.645
7.9
2.323
.276
2.229
2.951
3.438
3.312
2.265
8.7
2.259
.308
2.165
2.942
3.500
3.365
2.200
9.5
2.195
.340
2.101
2.918
3.625
3.419
2.130
10.7
2.091
.392
1.997
2.918
3.688
3.595
2.030
11.0*
2.065
.405
1.971
4,125
3.750
---
2.000
11.65*
1.995
.440
1.901
4.125
3.750
---
1.945
12.95
2.750
.375
2.625
3.236
4.313
4.189
2.687
15.80
2.548
.476
2.423
3.226
4.500
4.474
2.485
16.70*
2.480
.510
2.355
4.125
4.500
---
2.406
17.05*
2.440
.530
2..315
4.110
4.563
---
2.375
13.4
3.340
.330
3.215
3.236
4.625
4.514
3.275
19.0*
3.000
.500
2.875
4.625
5.000
---
2.920
22.5*
2.780
.610
2.655
4.602
5.188
---
2.700
15.5
3.826
.337
3.701
3.259
5.125
5.021
3.765
19.2
3.640
.430
3.515
3.236
5.313
5.170
3.560
21.6*
3.500
.500
3.375
4.630
5.500
---
3.420
24.0*
3.380
.560
3.255
4.625
5.563
---
3.300
26.5*
3.240
.630
3.115
4.620
5.688
---
3.160
API
WEIGHT
SIZE-O.D.
INT.JT.
(IN.)
2-3/8
2-7/8
3-1/2
4
4-1/2
PH-4: 4 THREADS PER INCH.
PH-6: 6 THREADS PER INCH.
*ONLY THESE WEIGHTS ARE PH-4; ALL OTHER WEIGHTS ARE PH-6.
4-13
O.D.
TADLOCK PIPE
PERFORMANCE PROPERTIES
HYDRIL TUBING
PH-4 & PH-6
COLLAPSE PRESSURE
PIPE*
BURST PRESSURE
TENSILE YIELD STRENGTH*
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
J-55
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
N-80
P-105
10,510
15,280
20,060
10,290
14,970
19,650
93,090
135,400
177,710
1600
2200
2700
10,760
15,650
20,540
10,580
15,390
20,200
95,340
138,670
182,000
1600
2200
2700
13,360
19,430
25,510
13,620
19,810
26,010
118,400
172,120
226,000
1600
2200
2700
9,550
13,890
18,230
9,250
13,450
17,650
123,940
180,280
236,620
2200
3000
3500
10,530
15,300
20,090
10,320
15,000
19,690
136,610
198,710
260,810
2200
3000
3500
11,470
16,690
21,900
11,390
16,560
21,730
148,900
216,620
284,310
3200
4500
5500
12,960
18,850
24,740
13,120
19,090
25,050
168,180
244,620
321,070
3200
4500
5500
13,310
19,360
24,410
13,570
19,730
25,890
173,000
251,000
330,000
4000
5000
6500
14,260
20,740
27,220
14,730
21,430
28,120
185,000
269,000
353,000
4000
5000
6500
10,530
15,310
20,090
10,320
15,000
19,690
202,490
294,530
386,570
4000
5500
7000
12,930
18,800
24,680
13,090
19,040
24,990
248,710
361,770
474,820
4000
5500
7000
13,690
19,920
26,140
14,020
20,400
26,770
264,000
383,000
503,000
5500
7500
9500
14,130
20,560
26,980
14,580
21,200
27,830
272,000
396,000
519,000
6000
8000
10000
(FT.-LBS)
8,330
12,110
15,900
7,940
11,550
15,160
209,260
304,380
399,500
4000
5500
7000
12,030
17,500
22,970
12,030
17,500
22,970
302,000
440,000
577,000
6000
8500
10500
14,220
20,680
27,140
14,680
21,350
28,020
357,000
520,000
682,000
7500
9500
11500
7,620
11,080
13,820
7,210
10,480
13,760
242,410
352,600
462,780
4500
6000
7500
9,510
13,820
18,140
9,200
13,380
17,560
302,400
439,850
577,300
4500
7500
9500
10,860
15,800
20,740
10,690
15,560
20,420
346,000
353,000
463,000
7000
9500
12000
11,990
17,420
22,880
11,980
17,420
22,870
381,000
555,000
728,000
7500
10000
13000
13,240
19,260
25,280
13,480
19,600
25,730
421,000
613,000
804,000
8500
11500
14500
*JOINT EFFICIENCY 100% OR MORE.
4-14
TADLOCK PIPE
DIMENSIONAL DATA
NL ATLAS BRADFORD TUBING
DSS-HTC & I-3SS
CONNECTION
DSS-HTC & IJ-3SS
DSS-HTC
IJ-3SS
WALL
DRIFT
PIN
PIN
I.D.
THICKNESS
DIAMETER
LENGTH
LENGTH
O.D.
I.D.
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
1.049
.133
.955
1.588
1.618
1.562
.985
.957
.179
.863
1.586
---
1.600
.849
2.4
1.380
.140
1.286
1.839
1.869
1.893
1.301
1-1/2 (1.900)
2.9
1.610
.145
1.516
2.028
2.058
2.123
1.531
2-1/16
3.4
1.750
.156
1.656
2.212
2.242
2.340
1.700
4.7
1.995
.190
1.901
2.773
2.803
2.710
1.945
5.3
1.939
.218
1.845
2.773
2.803
2.710
1.850
5.95
1.867
.254
1.773
2.764
2.794
2.910
1.805
6.2
1.853
.261
1.759
2.764
2.794
2.910
1.795
7.7
1.703
.336
1.609
2.758
2.758
3.135
1.695
6.5
2.441
.217
2.347
3.023
3.053
3.230
2.379
7.9
2.323
.276
2.229
3.016
3.046
3.385
2.265
8.7
2.259
.308
2.165
3.011
3.041
3.510
2.200
9.5
2.195
.340
2.101
3.005
3.035
3.635
2.133
11.0
2.065
.405
1.971
3.000
3.030
3.760
2.003
11.65
1.995
.440
1.901
3.000
3.030
3.760
1.933
9.3
2.992
.254
2.867
3.397
3.427
3.875
2.920
10.3
2.922
.289
2.797
3.394
3.424
3.947
2.878
12.95
2.750
.375
2.625
3.380
3.410
4.260
2.687
15.80
2.548
.476
2.423
3.374
3.404
4.385
2.470
16.70
2.480
.510
2.355
3.368
3.398
4.525
2.391
11
3.476
.262
3.351
3.522
3.552
4.385
3.401
13.4
3.340
.330
3.215
3.514
3.544
4.572
3.275
22.80
2.780
.610
2.655
3.500
---
4.885
2.705
12.75
3.958
.271
3.833
3.645
3.675
4.940
3.883
13.5
3.920
.290
3.795
3.647
---
4.940
3.845
15.5
3.826
.337
3.701
3.640
3.670
5.060
3.765
16.9
3.754
.373
3.629
---
5.150
---
3.679
19.2
3.640
.430
3.515
3.631
3.661
5.260
3.565
21.6
3.500
.500
3.375
3.626
---
5.375
3.425
WEIGHT
API
INTG.
SIZE-O.D.
JOINT
(IN.)
LB/FT
1.8
1 (1.315)
2.25
1-1/4 (1.660)
2-3/8
2-7/8
3-1/2
4
4-1/2
DSS-HTC CONNECTIONS INTERCHANGE WITH IJ-3SS;
HOWEVER MIXED CONNECTIONS CAN RENDER THE METAL-TO-METAL SEAL INEFFECTIVE.
1-1/8” TAPER PER FOOT.
8 THREADS PER INCH FOR SIZES 1” THROUGH 2-3/8”.
6 THREADS PER INCH FOR SIZES 2-7/8” THROUGH 4-1/2”.
4-15
TADLOCK PIPE
PERFORMANCE PROPERTIES
NL ATLAS BRADFORD TUBING
DSS-HTC & IJ-3SS
COLLAPSE PRESSURE
PIPE*
BURST PRESSURE
TENSILE YIELD STRENGTH*
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
10,000
14,550
19,090
9,730
14,160
18,580
27,160
39,510
51,860
200
300
400
12,940
18,820
24,700
13,100
19,060
25,010
35,140
51,110
67,080
200
300
400
8,500
12,360
16,220
8,120
11,800
15,500
36,770
53,480
70,200
400
500
600
7,750
11,280
14,290
7,350
10,680
14,020
43,970
63,960
83,940
500
600
800
7,690
11,180
14,060
7,280
10,5900
13,890
51,390
74,750
98,110
600
800
1000
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
1100
1300
1500
9,170
13,340
17,510
8,840
12,860
16,870
81,250
118,180
155,110
1300
1500
1700
10,510
15,280
20,060
10,290
14,970
19,650
93,090
135,400
177,710
1500
1700
1900
10,760
15,650
20,540
10,580
15,390
20,200
95,340
138,670
182,000
1700
1900
2100
13,360
19,430
25,510
13,620
19,810
26,010
118,400
172,180
226,000
2000
2200
2400
7,680
11,170
14,010
7,260
10,570
13,870
99,660
144,960
190,260
1600
1800
2200
9,550
13,890
18,230
9,250
13,450
17,650
123,940
180,280
236,620
2200
2600
3000
10,530
15,300
20,090
10,320
15,000
19,690
136,610
198,710
260,810
2600
3000
3500
11,470
16,690
21,900
11,390
16,560
21,730
148,900
216,620
284,310
3000
3500
4000
13,310
19,360
25,410
13,570
19,730
25,890
172,800
251,400
330,000
3600
4000
4400
14,260
20,740
27,220
14,730
21,430
28,120
185,130
269,270
353,420
4000
4500
5000
7,400
10,530
13,050
6,980
10,160
13,340
142,460
207,220
271,970
2200
2600
3000
8,330
12,120
15,920
7,950
11,560
15,180
160,340
233,230
306,110
2600
3000
3500
10,530
15,310
20,090
10,320
15,000
19,690
202,490
294,530
386,570
3000
3500
4000
12,930
18,800
24,680
13,090
19,040
24,990
248,710
361,770
474,820
4000
4500
5000
13,690
19,920
26,140
14,020
20,400
26,770
263,480
383,250
503,020
4500
5000
5500
6,590
8,800
10,700
6,300
9,170
12,040
169,220
246,140
323,060
2400
2800
3200
8,330
12,110
15,900
7,940
11,550
15,160
209,260
304,380
399,500
3200
3600
4000
---
20,680
27,140
---
21,350
28,020
357,310
519,720
682,130
4000
4500
5000
5,720
7,500
8,950
5,790
8,440
11,070
198,030
288,040
378,050
2500
3000
3500
6,420
8,540
10,350
6,200
9,020
11,840
211,000
306,850
402,740
3000
3500
4000
7,620
11,080
13,820
7,210
10,480
13,760
242,410
352,600
462,780
3500
4000
4500
---
12,160
15,960
---
10,880
15,230
265,980
386,890
507,790
4000
4500
5000
9,510
13,820
18,140
9,200
13,380
17,560
302,400
439,850
577,300
4500
5000
5500
10,860
15,800
20,740
10,690
15,560
20,420
345,580
502,660
659,740
5000
5500
6000
*JOINT EFFICIENCY MEETS OR EXCEEDS 100%.
4-16
J-55
N-80
P-105
(FT.-LBS)
TADLOCK PIPE
DIMENSIONAL DATA
NL ATLAS BRAFORD TUBING
IJ-4S
WEIGHT
API
CONNECTION
INTG.
WALL
DRIFT
UPSET
PIN
SIZE-O.D.
T&C
I.D.
THICKNESS
DIAMETER
O.D.
LENGTH
O.D.
I.D.
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
4.70
1.995
.190
1.901
2.468
2.300
2.71
1.930
5.30
1.939
.218
1.845
2.468
2.300
2.71
1.875
5.95
1.867
.254
1.773
2.468
2.300
2.91
1.805
6.20
1.853
.261
1.759
2.468
2.300
2.91
1.791
7.70
1.703
.336
1.609
2.468
2.300
3.135
1.641
6.50
2.441
.217
2.347
2.999
2.700
3.230
2.379
7.90
2.323
.276
2.229
2.999
2.700
3.385
2.261
8.70
2.259
.308
2.165
2.999
2.700
3.510
2.187
9.50
2.195
.340
2.101
2.999
2.700
3.635
2.133
11.00
2.065
.405
1.971
2.999
2.700
3.760
2.003
11.65
1.995
.440
1.901
2.999
2.700
3.760
1.933
9.30
2.992
.254
2.867
3.629
3.125
3.875
2.917
10.30
2.992
.289
2.797
3.629
3.125
3.947
2.847
12.95
2.750
.375
2.625
3.629
3.125
4.260
2.675
15.80
2.548
.476
2.423
3.629
3.125
4.385
2.470
16.70
2.480
.510
2.355
3.629
3.125
4.525
2.391
11.00
3.476
.262
3.351
4.134
3.200
4.385
3.401
13.40
3.340
.330
3.215
4.134
3.200
4.572
3.265
22.80
2.780
.610
2.655
4.134
3.200
4.885
2.705
12.75
3.958
.271
3.833
4.637
3.200
4.940
3.883
13.50
3.920
.290
3.795
4.637
3.200
4.940
3.845
15.50
3.826
.337
3.701
4.637
3.200
5.050
3.751
16.90
3.754
.373
3.629
4.637
3.200
5.150
3.679
19.20
3.640
.430
3.515
4.637
3.200
5.260
3.565
21.60
3.500
.500
3.375
4.637
3.200
5.375
3.425
2-3/8
2-7/8
3-1/2
4
4-1/2
THREADS CUT ON 1-1/8” TAPER PER FOOT.
8 THREADS PER INCH FOR SIZE 2-3/8
6 THREADS PER INCH FOR SIZES 2-7/8 – 4-1/2.
4-17
TADLOCK PIPE
PERFORMANCE PROPERTIES
NL ATLAS BRADFORD TUBING
IJ-4S
COLLAPSE PRESSURE
PIPE*
BURST PRESSURE
TENSILE YIELD STRENGTH*
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
1,300
2,000
2,400
9,170
13,340
17,510
8,840
12,860
16,870
81,000
118,000
155,000
1,300
2,000
2,400
10,510
15,280
20,060
10,290
14,970
19,650
93,090
135,400
177,710
1,800
2,500
3,000
10,760
15,650
20,540
10,580
15,390
20,200
95,000
139,000
182,000
1,800
2,500
3,000
13,360
19,430
25,510
13,620
18,810
26,010
118,000
172,000
226,000
2,600
3,200
3,800
7,680
11,170
14,010
7,260
10,570
13,870
99,660
144,960
190,260
1,700
2,600
3,000
9,550
13,890
18,230
9,250
13,450
17,650
123,940
180,280
236,620
2,000
3,000
3,500
10,530
15,300
20,090
10,320
15,000
19,690
136,610
198,710
260,810
2,000
3,000
3,500
11,470
16,690
21,900
11,390
16,560
21,730
148,900
216,620
284,310
2,000
3,000
3,500
13,310
19,360
25,410
13,570
19,730
25,890
172,800
251,400
330,000
2,500
3,600
4,200
14,260
20,740
27,220
14,730
21,430
28,120
185,130
269,270
353,420
2,500
3,600
4,200
7,400
10,530
13,050
6,980
10,160
13,340
142,460
207,220
271,970
2,300
3,200
4,100
8,330
12,120
15,920
7,950
11,560
15,180
160,340
233,230
306,110
2,300
3,200
4,100
10,530
15,310
20,090
10,320
15,000
19,690
202,490
294,530
386,570
2,800
3,700
4,700
12,930
18,800
24,680
13,090
19,040
24,990
248,710
361,770
474,820
3,000
4,000
5,000
13,690
19,920
26,140
14,020
20,400
26,770
263,480
383,250
503,020
3,000
4,000
5,000
6,590
8,800
10,700
6,300
9,170
12,040
169,220
246,140
323,060
3,000
4,000
4,500
8,330
12,110
15,900
7,940
11,550
15,160
209,260
304,380
399,500
3,500
4,500
5,500
---
20,680
27,140
---
21,350
8,020
357,310
519,720
682,130
5,000
6,000
7,000
5,720
7,500
8,950
5,790
8,440
11,070
198,030
288,040
378,050
2,900
4,000
5,000
6,420
8,540
10,350
6,200
9,020
11,840
211,000
306,850
402,740
2,900
4,000
5,000
7,620
11,080
13,820
7,210
10,480
13,760
242,410
352,600
462,780
3,500
4,500
5,600
---
12,160
15,960
---
10,880
15,230
265,980
386,890
507,790
4,000
6,000
6,500
9,510
13,820
18,140
9,200
13,380
17,560
302,400
439,850
577,300
5,000
6,000
7,200
10,860
15,800
20,740
10,960
15,560
20,420
345,580
502,660
659,740
5,000
6,000
7,500
*JOINT EFFICIENCY MEETS OR EXCEEDS 100%.
4-18
J-55
N-80
P-105
(FT.-LBS)
TADLOCK PIPE
DIMENSIONAL DATA
NL ATLAS BRADFORD TUBING
TC-4S
API
SIZE
CONNECTION
WEIGHT
WALL
DRIFT
PIN
O.D.
T&C
I.D.
THICKNESS
DIAMETER
LENGTH
O.D.
I.D.
(IN.)
LB/FT
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
4.7
1.995
.190
1.901
3.081
2.750
1.995
5.3
1.939
.218
1.845
3.081
2.750
1.939
5.95
1.867
.254
1.773
3.081
2.800
1.867
6.2
1.853
.261
1.759
3.081
2.800
1.853
7.7
1.703
.336
1.609
3.081
2.900
1.703
6.5
2.441
.217
2.347
3.331
3.250
2.441
7.9
2.323
.276
2.229
3.331
3.375
2.323
8.7
2.259
.308
2.165
3.331
3.375
2.259
9.5
2.195
.340
2.101
3.331
3.450
2.195
11.0
2.065
.405
1.971
3.331
3.500
2.065
11.65
1.995
.440
1.901
3.331
3.550
1.995
9.3
2.992
.254
2.867
3.706
3.950
2.992
10.3
2.922
.289
2.797
3.706
3.950
2.922
12.95
2.750
.375
2.625
3.706
4.100
2.750
15.80
2.548
.476
2.423
3.706
4.200
2.548
16.70
2.480
.510
2.355
3.706
4.250
2.480
11.0
3.476
.262
3.351
3.875
4.450
3.476
13.4
3.340
.330
3.215
3.875
4.525
3.340
12.75
3.958
.271
3.833
4.000
4.950
3.958
13.5
3.920
.290
3.795
4.000
4.950
3.920
15.5
3.826
.337
3.701
4.000
5.100
3.826
16.9
3.754
.373
3.629
4.000
5.100
3.754
19.2
3.640
.430
3.515
4.000
5.200
3.640
21.6
3.500
.500
3.375
4.000
5.300
3.500
2-3/8
2-7/8
3-1/2
4
4-1/2
THREADS CUT ON 3/4” TAPER PER FOOT
8 THREADS PER INCH FOR SIZES 2-3/8” – 3-1/2”
6 THREADS PER INCH FOR SIZES 4” – 4-1/2”
4-19
TADLOCK PIPE
PERFORMANCE PROPERTIES
NL ATLAS BRADFORD TUBING
TC-4S
COLLAPSE PRESSURE
PIPE*
BURST PRESSURE
TENSILE YIELD STRENGTH
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
1300
2000
2400
9,170
13,340
17,510
8,840
12,860
16,870
81,250
118,180
155,110
1300
2000
2400
10,510
15,280
20,060
10,290
14,970
19,650
93,090
135,400
177,710
1800
2500
3000
10,760
15,650
20,540
10,580
15,390
20,200
95,340
138,670
182,000
1800
2500
3000
13,360
19,430
25,510
13,620
19,810
26,010
118,400
172,120
226,000
2600
3200
3800
7,680
11,170
14,010
7,260
10,570
13,870
99,660
144,960
190,260
1700
2600
3000
9,550
13,890
18,230
9,250
13,450
17,650
123,940
180,280
236,620
2000
3000
3500
10,530
15,300
20,090
10,320
15,000
19,690
136,610
198,710
260,810
2000
3000
3500
11,470
16,690
21,900
11,390
16,560
21,730
148,900
216,620
284,310
2000
3000
3500
13,310
19,360
25,410
13,570
19,730
25,890
172,800
251,400
330,000
2500
3600
4200
14,260
20,740
27,220
14,730
21,430
28,120
185,130
269,270
353,420
2500
3600
4200
7,400
10,530
13,050
6,980
10,160
13,340
142,460
207,220
271,970
2300
3200
4100
8,330
12,120
15,920
7,950
11,560
15,180
160,340
233,230
306,110
2300
3200
4200
10,530
15,310
20,090
10,320
15,000
19,690
202,490
294,530
386,570
2800
3700
4700
12,930
18,800
24,680
13,090
19,040
24,990
248,710
361,770
474,820
3000
4000
5000
13,690
19,920
26,140
14,020
20,400
26,700
263,480
383,250
503,020
3000
4000
5000
6,590
8,800
10,700
6,300
9,170
12,040
169,220
246,140
323,060
3000
4000
4500
8,330
12,110
15,900
7,940
11,550
15,160
209,260
304,380
399,500
3500
4500
5500
5,720
7,500
8,950
5,790
8,440
11,070
198,030
288,040
378,050
2900
4000
5000
6,420
8,540
10,350
6,200
9,020
11,840
211,000
306,850
402,740
2900
4000
5000
7,620
11,080
13,820
7,210
10,480
13,760
242,410
352,600
462,780
3500
4500
5600
8,360
12,160
15,960
7,980
11,600
15,230
265,980
386,880
507,780
4000
6000
6500
9,510
13,820
18,140
9,200
13,380
17,560
302,400
439,850
577,300
5000
6000
7200
10,860
15,800
20,740
10,690
15,560
20,420
345,580
502,660
659,740
5000
6000
7500
*JOINT EFFICIENCY MEETS OR EXCEEDS 100%.
4-20
J-55
N-80
P-105
(FT.-LBS)
TADLOCK PIPE
DIMENSIONAL DATA
NL ATLAS BRADFORD TUBING
FL-4S
API
SIZE
CONNECTION
WEIGHT
O.D.
(IN.)
2-3/8
2-7/8
3-1/2
4
4-1/2
DRIFT
PIN
I.D.
THICKNESS
DIAMETER
LENGTH
I.D.
LB/FT
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
4.70
1.995
.190
1.901
1.523
1.926
5.95
1.887
.254
1.773
2.050
1.823
6.65
1.815
2.80
1.721
2.099
1.771
6.50
2.441
.217
2.347
1.473
2.372
7.90
2.323
.276
2.229
2.099
2.279
8.70
2.259
.308
2.165
2.161
2.215
10.40
2.151
.362
2.057
3.841
2.107
7.70
3.068
.216
2.943
1.635
2.968
9.30
2.992
.254
2.867
2.048
2.917
10.30
2.922
2.89
2.797
2.132
2.847
12.95
2.750
.375
2.625
3.847
2.675
13.30
2.764
.368
2.639
3.910
2.689
15.50
2.602
.449
2.477
4.348
2.527
9.50
3.548
.226
3.423
1.680
3.448
11.00
3.476
.262
3.351
2.068
3.401
11.60
3.428
.286
3.303
2.118
3.353
14.00
3.340
.330
3.215
2.211
3.265
9.50
4.090
.205
3.965
1.588
3.990
10.50
4.052
.224
3.927
1.672
3.952
11.60
4.000
.250
3.875
2.111
3.952
12.60
3.958
.271
3.833
2.048
3.883
13.50
3.920
.290
3.795
2.128
3.845
15.10
3.826
.337
3.701
2.221
3.751
16.90
3.754
.373
3.629
3.889
3.679
18.80
3.640
.430
3.515
4.248
3.565
21.60
3.500
.500
3.375
4.679
3.425
1-1/8” TAPER PER FOOT.
6 THREADS PER INCH.
4-21
WALL
TADLOCK PIPE
PERFORMANCE PROPERTIES
NL ATLAS BRADFORD TUBING
FL-43
COLLAPSE PRESSURE
BURST PRESSURE
JOINT YIELD STRENGTH
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
J-55
N-80
P-105
(FT.-LBS)
8,100
11,780
15,460
7,700
11,200
14,700
32,000
47,000
62,000
400
500
500
10,510
15,280
20,060
10,290
14,970
19,650
51,000
74,000
62,000
400
500
500
11,440
16,640
21,840
11,350
16,500
21,660
56,000
81,000
106,000
500
600
600
7,680
11,170
14,010
7,260
10,570
13,870
45,000
65,000
86,000
600
800
800
9,550
13,890
18,230
9,250
13,450
17,650
68,000
99,000
130,000
600
800
800
10,530
15,300
20,090
10,320
15,000
19,690
75,000
109,000
143,000
700
900
800
12,110
17,610
23,110
12,120
17,630
23,140
102,000
149,000
195,000
700
900
900
5,970
7,870
9,440
5,940
8,640
11,340
55,000
80,000
105,000
1400
1600
1600
7,400
10,530
13,050
6,980
10,160
13,340
78,000
114,000
149,000
1400
1600
1600
8,330
12,120
15,920
7,950
11,560
15,180
88,000
128,000
168,000
1400
1600
1600
10,530
15,310
20,090
10,320
15,000
19,690
131,000
191,000
251,000
1500
1700
1700
10,350
15,060
19,760
10,120
14,730
19,320
129,000
189,000
247,000
1500
1700
1700
12,300
17,890
23,480
12,370
17,990
23,610
154,000
224,000
294,000
1500
1700
1700
5,110
6,590
7,720
5,440
7,910
10,380
66,000
96,000
126,000
2000
2300
2300
6,590
8,800
10,700
6,300
9,170
12,040
93,000
135,000
178,000
2200
2500
2500
7,300
10,270
12,690
6,880
10,010
13,140
101,000
146,000
193,000
2200
2500
2500
8,330
12,110
15,900
7,940
11,550
15,160
115,000
167,000
220,000
2400
2700
2700
3,310
---
---
4,380
---
---
68,000
---
---
2500
---
---
4,010
---
---
4,790
---
---
74,000
---
---
2500
---
---
4,960
6,350
7,560
5,350
7,780
10,690
101,000
147,000
193,000
2700
3200
3200
5,720
7,500
8,950
5,790
8,440
11,070
109,000
158,000
208,000
2700
3200
3200
6,420
8,540
10,350
6,200
9,020
11,840
116,000
168,000
221,000
3000
3500
3500
7,620
11,090
13,820
7,210
10,480
13,760
133,000
194,000
236,000
3000
3500
3500
---
12,160
15,960
---
11,600
15,230
---
252,000
330,000
3200
3700
3700
9,510
13,830
18,150
9,200
13,380
17,560
196,000
285,000
375,000
3200
3700
3700
10,860
15,800
20,740
10,690
15,560
20,420
224,000
326,000
428,000
3200
3700
3700
4-22
TADLOCK PIPE
DIMENSIONAL DATA
QUANEX TUBING JOINTS
DWS & DW
API
SIZE
CONNECTION
WEIGHT
WALL
DRIFT
PIN
O.D.
T&C
I.D.
THICKNESS
DIAMETER
LENGTH
O.D.
I.D.
(IN.)
LB/FT
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
1 (1.315)
1.80*
1.049
.133
.955
1.750
1.552
.970
1 (1.315)
2.25
.957
.179
.848
1.750
1.654
.864
1-1/4 (1.660)
2.40*
1.380
.140
1.286
2.125
1.883
1.300
1-1/4 (1.660)
3.02
1.278
.191
1.184
2.125
1.974
1.200
1-1/2 (1.900)
2.90*
1.610
.145
1.516
2.375
2.113
1.530
1-1/2 (1.900)
3.64
1.500
.200
1.406
2.375
2.202
1.420
2-1/16
3.25*
1.751
.156
1.657
2.500
2.330
1.700
2-1/16
4.50
1.163
.225
1.519
2.500
2.460
1.545
4.70
1.995
.190
1.901
2.625
2.700
1.945
5.30
1.939
.218
1.845
2.625
2.740
1.890
5.95
1.867
.254
1.773
2.625
2.900
1.805
7.70
1.703
.336
1.609
2.625
3.125
1.635
6.50
2.441
.217
2.347
2.750
3.220
2.375
7.90
2.323
.276
2.229
2.750
3.400
2.255
8.70
2.259
.308
2.165
2.750
3.500
2.190
9.50
2.195
.340
2.101
2.750
3.625
2.126
11.00
2.065
.405
1.971
2.750
3.750
1.996
9.30
2.992
.254
2.867
3.000
3.905
2.920
10.30
2.922
.289
2.797
3.000
3.955
2.840
12.95
2.750
.375
2.625
3.000
4.250
2.665
11.00
3.476
.262
3.351
3.250
4.405
3.395
13.40
3.340
.330
3.215
3.250
4.560
3.260
12.75
3.958
.271
3.833
3.250
4.910
3.865
13.50
3.920
.290
3.795
3.250
4.935
3.835
15.50
3.826
.337
3.701
3.250
5.060
3.740
2-3/8
2-7/8
3-1/2
4
4-1/2
*DW CONNECTIONS ARE AVAILABLE ONLY IN THESE WEIGHTS
3/4” TAPER PER FOOT.
8 THREADS PER INCH (MODIFIED ACME THREADS)
4-23
TADLOCK PIPE
PERFORMANCE PROPERTIES
QUANEX TUBING JOINTS
DWS & DW
COLLAPSE PRESSURE
PIPE*
BURST PRESSURE
TENSILE YIELD STRENGTH
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
10,000
14,550
19,090
9,730
14,160
18,580
27,160
39,510
51,860
200
300
400
12,940
18,820
24,700
13,100
19,060
25,010
35,140
51,110
67,080
200
300
400
8,500
12,360
16,220
8,120
11,800
15,500
36,770
53,480
70,200
400
500
600
11,200
16,290
21,380
11,070
16,110
21,140
48,480
70,520
92,550
400
600
700
7,750
11,280
14,290
7,350
10,680
14,020
43,970
63,960
83,940
500
600
800
10,360
15,070
19,780
10,130
14,740
19,340
58,750
85,450
112,160
600
800
900
7,690
11,180
14,060
7,280
10,590
13,890
51,390
74,750
98,110
600
800
1000
10,690
15,550
20,410
10,500
15,270
20,040
71,460
103,940
136,420
700
900
1000
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
1100
1300
1500
9,170
13,340
17,510
8,840
12,860
16,870
81,250
118,180
155,110
1300
1500
1700
10,510
15,280
20,060
10,290
14,970
19,650
93,090
135,400
177,710
1500
1700
1900
13,360
19,430
25,510
13,620
19,810
26,010
118,400
172,180
226,000
2000
2200
2400
7,680
11,170
14,010
7,260
10,570
13,870
99,660
144,960
190,260
1600
1800
2200
9,550
13,890
18,230
9,250
13,450
17,650
123,940
180,280
236,620
2200
2600
3000
10,530
15,300
20,090
10,320
15,000
19,690
136,610
198,710
260,810
2600
3000
3500
11,470
16,690
21,900
11,390
16,560
21,730
148,900
216,620
284,310
3000
3500
4000
13,310
19,360
25,410
13,570
19,730
25,890
172,800
251,400
330,000
3600
4000
4400
7,400
10,530
13,050
6,980
10,160
13,340
142,460
207,220
271,970
2200
2600
3000
8,330
12,120
15,920
7,950
11,560
15,180
160,340
233,230
306,110
2600
3000
3500
10,530
15,310
20,090
10,320
15,000
19,690
202,490
294,530
386,570
3000
3500
4000
6,590
8,800
10,700
6,300
9,170
12,040
169,220
246,140
323,060
2400
2800
3200
8,330
12,110
15,900
7,940
11,550
15,160
209,260
304,380
399,500
3200
3600
4000
5,720
7,500
8,950
5,790
8,440
11,070
198,030
288,040
378,050
2500
3000
3500
6,420
8,540
10,350
6,200
9,020
11,840
211,000
306,850
402,740
3000
3500
4000
7,620
11,080
13,820
7,210
10,480
13,760
242,410
352,600
462,780
3500
4000
4500
*JOINT EFFICIENCY MEETS OR EXCEEDS 100%.
4-24
J-55
N-80
P-105
(FT.-LBS)
TADLOCK PIPE
DIMENSIONAL DATA
REED “RTS” TUBING
CONNECTION
WALL
DRIFT
PIN
I.D.
THICKNESS
DIAMETER
LENGTH
REG.
SPEC
I.D.
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
4.70*
1.995
.190
1.901
2.272
2.705
2.655
1.940
5.30*
1.939
.218
1.845
2.260
2.750
2.700
1.885
5.95
1.867
.254
1.773
2.978
2.906
---
1.805
6.20
1.853
.261
1.759
2.969
2.937
---
1.795
7.70
1.703
.336
1.609
2.936
3.125
---
1.645
6.50*
2.441
.217
2.347
2.338
3.220
3.166
2.370
7.90
2.323
.276
2.229
2.951
3.437
---
2.265
8.70
2.259
.308
2.165
2.942
3.500
---
2.200
9.50
2.195
.340
2.101
2.918
3.625
---
2.130
10.70
2.091
.392
1.997
2.918
3.687
---
2.030
9.30*
2.992
.254
2.864
2.788
3.915
3.859
2.920
10.30*
2.992
.289
2.797
2.786
3.980
3.914
2.870
12.95
2.750
.375
2.625
3.236
4.313
---
2.687
15.80
2.548
.476
2.423
3.226
4.500
---
2.485
API
WEIGHT
SIZE-O.D.
INT. T&C
(IN.)
2-3/8
2-7/8
3-1/2
*8 THREADS PER INCH, OTHER WEIGHTS ARE 6 THREADS PER INCH.
4-25
O.D.
TADLOCK PIPE
PERFORMANCE PROPERTIES*
REED “RTS” TUBING
COLLAPSE PRESSURE
PIPE
BURST PRESSURE
TENSILE YIELD STRENGTH
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
1,100
1,550
1,550
9,170
13,340
17,510
8,840
12,860
16,870
81,250
118,180
155,110
1,100
1,550
1,550
10,510
15,280
20,060
10,290
14,970
19,650
93,090
135,400
177,710
1,650
2,250
2,700
10,760
15,650
20,540
10,580
15,390
20,200
95,340
139,670
182,000
1,650
2,250
2,700
13,360
19,430
25,510
13,620
19,810
26,010
118,400
172,120
226,000
1,650
2,250
2,700
7,680
11,170
14,010
7,260
10,570
13,870
99,660
144,960
190,260
1,525
2,150
2,150
9,550
13,890
18,230
9,250
13,450
17,650
123,940
180,280
236,620
1,525
3,050
3,600
10,530
15,300
20,090
10,320
15,000
19,690
136,610
198,710
260,810
2,250
3,050
3,600
11,470
16,690
21,900
11,390
16,560
21,730
148,900
216,620
284,310
3,300
4,600
5,650
12,960
18,850
24,740
13,120
19,090
25,050
168,100
244,600
321,000
3,300
4,600
5,650
7,400
10,530
13,050
6,980
10,160
13,340
142,460
207,220
271,970
2,550
3,050
3,050
8,330
12,120
15,920
7,950
11,560
15,180
160,340
233,230
306,110
2,550
3,050
3,050
10,530
15,310
20,090
10,320
15,000
19,690
202,490
294,530
386,570
4,150
5,650
7,150
12,930
18,800
24,680
13,090
19,040
24,990
248,710
361,770
474,820
4,150
5,650
7,150
*JOINT EFFICIENCY 100% OR BETTER.
4-26
J-55
N-80
P-105
(FT.-LBS)
TADLOCK PIPE
DIMENSIONAL DATA
VALLOUREC VAM TUBING
API
SIZE
COUPLING
WEIGHT
WALL
DRIFT
PIN
O.D.
O.D.
T&C
I.D.
THICKNESS
DIAMETER
LENGTH
REG.
SP.CL
LENGTH
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
4.60
1.995
.190
1.901
2.697
2.618
5.10
1.939
.218
1.845
2.697
2.618
5.80
1.867
.254
1.773
2.776
2.697
6.40
2.441
.217
2.347
3.197
3.150
7.70
2.323
.276
2.229
3.327
3.264
8.60
2.259
.308
2.165
3.327
3.264
9.80
2.151
.362
2.057
---
3.327
7.70
3.068
.216
2.943
2.991
3.803
---
9.20
2.992
.254
2.867
3.011
3.862
3.795
10.20
2.922
2.89
2.797
2.991
3.917
3.854
12.70
2.750
.375
2.625
2.991
4.035
3.957
13.70
2.674
.413
2.549
2.991
4.138
4.028
14.70
2.600
.450
2.475
2.991
4.138
4.028
9.50
3.548
.226
3.423
3.265
4.327
---
10.90
3.476
.262
3.351
3.287
4.366
4.315
13.00
3.340
.330
3.215
3.265
4.469
4.358
14.80
3.240
.380
3.115
3.265
4.606
4.461
16.50
3.140
.430
3.015
3.265
4.606
---
12.60
3.958
.271
3.833
3.661
4.862
4.803
2-3/8
2-7/8
3-1/2
4
4-1/2
2.204
2.499
4.921
5.551
6.496
7.047
7.835
8 THREADS PER INCH FOR SIZES 2-3/8” THROUGH 2-7/8”.
6 THREADS PER INCH FOR SIZES 3-1/2” THROUGH 4-1/2”.
3/4” TAPER PER FOOT.
VALLOUREC MINI VAM
WEIGHT
API
CONNECTION
INTG.
WALL
DRIFT
UPSET
PIN
SIZE-O.D.
T&C
I.D.
THICKNESS
DIAMETER
O.D.
LENGTH
O.D.
I.D.
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
.807
3/4
1.16
.824
.113
.730
1.142
1.850
1.299
(1.050)
1.50
.742
.154
.648
1.220
1.850
1.339
.728
1
1.72
1.049
.133
.955
1.378
2.087
1.555
1.004
(1.315)
2.20
.957
.179
.848
1.457
2.087
1.614
.906
1-1/4
2.33
1.380
.140
1.286
1.713
2.205
1.913
1.307
(1.660)
3.05
1.278
.191
1.183
1.791
2.205
1.976
1.205
1-1/2
2.76
1.610
.145
1.516
1.929
2.283
2.142
1.535
4.10
1.500
.200
1.406
2.008
2.283
2.220
1.429
500
600
(1.900)
6 THREADS PER INCH.
4-27
TADLOCK PIPE
PERFORMANCE PROPERTIES
VALLOUREC VAM TUBING
COLLAPSE PRESSURE
BURST PRESSURE
JOINT YIELD STRENGTH
OPTIMUM MAKE-UP TORQUE
K-55
N-80
P-105
K-55
N-80
P-105
K-55
N-80
P-105
K-55
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
N-80
P-105
8100
11780
15460
7700
11200
14700
72,000
104,000
137,000
1400
2000
2200
9170
13340
17510
8840
12850
16870
79,000
115,000
152,000
1600
2000
2200
10510
15280
20060
10290
14970
19650
93,000
135,000
178,000
1800
2200
2300
7680
11170
14010
7260
10570
13870
100,000
145,000
190,000
2400
2700
2700
9550
13890
18220
9240
13440
17640
124,000
180,000
237,000
2900
3100
3100
10520
15300
20090
10310
15000
19690
137,000
199,000
261,000
3100
3300
3300
12110
17610
23110
12120
17630
23140
137,000
199,000
261,000
---
2700
---
5970
7870
9440
5940
8640
11340
123,000
178,000
234,000
2900
3200
3800
7400
10530
13050
6980
10160
13330
142,000
207,000
272,000
2900
3600
4700
8330
12120
15910
7950
11560
15170
160,000
233,000
306,000
4300
4900
4900
10520
15310
20090
10310
15000
19690
201,000
293,000
385,000
5100
5800
5800
11450
16650
21860
11360
16520
21680
220,000
320,000
421,000
5400
6100
6100
12320
17930
23530
12370
18000
23620
237,000
345,000
453,000
5400
6100
6100
5110
6590
7710
5440
7910
10380
147,000
214,000
281,000
2500
3600
3600
6590
8800
10700
6300
9170
12040
169,000
246,000
323,000
3300
4000
4000
8330
12110
15900
7940
11550
15160
209,000
304,000
398,000
4300
5100
5100
9460
13760
18050
9140
13300
17460
238,000
346,000
454,000
5800
6500
6500
10550
15350
20150
10350
15050
19750
262,000
382,000
501,000
7200
8000
8000
5720
7500
8950
5800
8430
11070
197,000
287,000
377,000
4700
4700
5400
(FT.-LBS)
VALLOUREC VAM TUBING
COLLAPSE PRESSURE
PIPE*
BURST PRESSURE
TENSILE YIELD STRENGTH
OPTIMUM MAKE-UP TORQUE
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
10,560
15,370
20,170
10,360
15,070
19,780
18,290
26,610
34,920
150
200
200
13,770
20,020
26,280
14,120
20,530
26,950
23,840
34,680
45,510
150
200
200
10,000
14,550
19,090
9,730
14,160
18,580
27,610
39,510
51,860
200
300
300
12,940
18,820
24,700
13,100
19,060
25,010
35,140
51,110
67,080
200
300
300
8,500
12,360
16,220
8,120
11,800
15,500
36,770
53,480
70,200
350
500
16,290
21,380
11,070
16,110
21,140
48,480
70,500
92,550
350
500
500
7,750
11,280
14,290
7,350
10,680
14,020
43,970
63,960
83,940
450
600
15,070
19,780
10,130
14,740
19,340
58,750
85,450
112,150
450
600
600
11,200
10,360
*JOINT EFFICIENCY 100% OR MORE.
4-28
J-55
N-80
P-105
(FT.-LBS)
TADLOCK PIPE
DIMENSIONAL DATA
USS IMPROVED BUTTRESS
API
WEIGHT
SIZE
INTG.
COUPLING
WALL
DRIFT
PIN
O.D.
T&C
I.D.
THICKNESS
DIAMETER
LENGTH
O.D.
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
2-3/8
4.60
1.995
.190
1.901
3-5/8
2.875
8-1/2
5.80
1.867
.254
1.773
3-5/8
2.875
8-1/2
6.40
2.441
.217
2.347
3-5/8
3.500
8-1/2
7.90
2.323
.276
2.229
3-5/8
3.500
8-1/2
8.60
2.259
.308
2.165
3-5/8
3.500
8-1/2
9.20
2.992
.254
2.867
3-5/8
4.250
8-1/2
10.20
2.922
.289
2.797
3-5/8
4.250
8-1/2
14.90
2.602
.449
2.477
3-5/8
4.250
8-1/2
4
10.90
3.476
.262
3.351
3-7/8
4.750
9
4-1/2
12.60
3.958
.271
3.833
4-1/8
5.200
9-1/2
2-7/8
3-1/2
LENGTH
THREADS CUT WITH 3/4” TAPER PER FOOT.
8 THREADS PER INCH.
WHEELING
PITTSBURGH SEAMLESS 8 ACME
API
WEIGHT
SIZE
INTG.
COUPLING
WALL
DRIFT
PIN
O.D.
T&C
I.D.
LENGTH
O.D.
SP.CL.
(IN.)
(LB/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
1-1/2
3.10
1.570
.165
1.476
3-1/4
2.40
2.20
7-3/4
THICKNESS DIAMETER
LENGTH
(1.990)
2
3.40
1.670
.165
1.576
3-1/4
2.50
2.30
7-3/4
2-3/8
4.60
1.995
.190
1.901
3-5/8
2.875
2.700
8-1/2
2-7/8
6.40
2.441
.217
2.347
3-5/8
3.500
3.220
8-1/2
3-1/2
9.20
2.992
.254
2.867
3-5/8
4.250
3.865
8-1/2
4
10.90
3.476
.262
3.351
3-7/8
4.750
4.400
9
4-1/2
12.60
3.958
.271
3.833
4-1/8
5.200
4.920
9-1/2
4-29
TADLOCK PIPE
PERFORMANCE PROPERTIES
USS IMPROVED BUTTRESS
COLLAPSE PRESSURE
PIPE
BURST PRESSURE
TENSILE YIELD STRENGTH*
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
P-105
LBS
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
10,510
15,280
20,060
10,290
14,970
19,650
93,090
135,400
177,710
7,680
11,160
14,010
7,260
10,570
13,870
99,660
144,960
190,260
9,550
13,890
18,220
9,240
13,440
17,640
123,940
180,280
236,620
10,520
15,300
20,090
10,310
15,000
19,690
136,610
198,710
260,810
7,400
10,530
13,050
6,980
10,160
13,330
142,460
207,220
271,970
8,330
12,120
15,910
7,950
11,560
15,170
160,340
233,220
306,110
12,300
17,890
23,480
12,350
17,960
23,570
236,700
344,300
451,890
6,590
8,800
10,700
6,300
9,170
12,040
169,220
246,140
323,050
5,720
7,500
8,950
5,800
8,430
11,070
198,030
288,040
378,050
*JOINT EFFICIENCY 100% OR MORE.
THE IMPROVED USS BUTTRESS THREAD TUBING KNURLED MAKE-UP MARK IS CONSTRUCTED AND POSITIONED SO THAT IT PROVIDES A GUIDE TO ESTABLISHING RIGDETERMINED TORQUE.
WHEELING
PITTSBURGH SEAMLESS 8 ACME
COLLAPSE PRESSURE
PIPE
BURST PRESSURE
TENSILE YIELD STRENGTH*
J-55
N-80
P-105
J-55
N-80
P-105
J-55
N-80
P-105
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
8,710
12,570
---
8,360
12,160
---
49,450
71,920
---
8,320
12,110
15,890
7,940
11,550
15,160
52,320
76,080
99,860
8,100
11,780
15,460
7,700
11,200
14,700
71,730
104,340
136,940
7,680
11,160
14,010
7,260
10,570
13,870
99,660
144,960
190,260
7,400
10,530
13,050
6,980
10,160
13,330
142,460
207,220
271,970
6,590
8,800
10,700
6,300
9,170
12,040
169,220
246,140
323,050
5,720
7,500
8,950
5,800
8,430
11,070
198,030
288,040
378,050
4-30
TADLOCK PIPE
DIMENSIONAL DATA
LINE PIPE - STANDARD WEIGHT, THREADED - DIMENSIONAL DATA
WEIGHT PER FOOT
NOM. SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
8
10
10
10
12
12
14
16
18
20
O.D.
.405
.540
.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
8.625
10.750
10.750
10.750
12.750
12.750
14.000
16.000
18.000
20.000
ID.
.269
.364
.493
.622
.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
5.047
6.065
7.981
8.071
10.020
10.192
10.136
12.000
12.090
13.250
15.250
17.250
19.250
PLAIN
.24
.42
.57
.85
1.13
1.68
2.27
2.72
3.65
5.79
7.58
9.11
10.79
14.62
18.97
28.55
24.70
40.48
31.20
34.24
49.56
43.77
54.57
62.58
70.59
78.60
THD. & CPL.
.25
.43
.57
.86
1.14
1.70
2.30
2.75
3.75
5.90
7.70
9.25
11.00
15.00
19.45
29.35
25.55
41.85
32.75
35.75
51.15
45.45
57.00
65.30
73.00
81.00
THREADS
PER IN.
27
18
18
14
14
11-1/2
11-1/2
11-1/2
11-1/2
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
TAPER
PER FOOT
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
MALE THD
LENGTH
.392
.595
.601
.782
.794
.985
1.009
1.025
1.058
1.571
1.634
1.684
1.734
1.840
1.946
2.146
2.146
2.359
2.359
2.359
2.559
2.559
2.684
2.884
3.084
3.284
COUPLING
LENGTH
1-1/16
1-5/8
1-5/8
2-1/8
2-1/8
2-5/8
2-3/4
2-3/4
2-7/8
4-1/8
4-1/4
4-3/8
4-1/2
4-5/8
4-7/8
5-1/4
5-1/4
5-3/4
5-3/4
5-3/4
6-1/8
6-1/8
6-3/8
6-3/4
7-1/8
7-5/8
COUPLING
DIAMETER
.563
.719
.875
1.063
1.313
1.576
2.054
2.200
2.875
3.375
4.000
4.625
5.200
6.296
7.390
9.625
9.625
11.750
11.750
11.750
14.000
14.000
15.000
17.000
19.000
21.000
STANDARD STEEL PIPE
DIMENSION AND STRENGTH DATA
STANDARD - WEIGHT
NOM.
SIZE
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
3-1/2
4
5
6
8
10
12
O.D.
(IN.)
.405
.540
.675
.840
1.050
1.315
1.660
1.900
2.375
2.875
3.500
4.000
4.500
5.563
6.625
8.625
10.750
12.750
I.D.
(IN.)
.269
.364
.493
.622
.824
1.049
1.380
1.610
2.067
2.469
3.068
3.548
4.026
WALL
THICK.
(IN.)
.068
.088
.091
.109
.113
.133
.140
.145
.154
.203
.216
.226
.237
WT./FT.
PLAIN
.24
.42
.57
.85
1.13
1.68
2.27
2.72
3.65
5.79
7.58
9.11
10.79
EXTRA-STRONG
GRADE A
TEST
PRESSURE
700
700
700
700
700
700
1200
1200
2330
2500
2220
2030
1900
I.D.
(IN.)
.215
.302
.423
.546
.742
.957
1.278
1.500
1.939
2.323
2.900
3.364
3.826
4.813
5.761
7.625
9.750
11.750
WALL
THICK.
(IN.)
.095
.119
.126
.147
.154
.179
.191
.200
.218
.276
.300
.318
.337
.375
.432
.500
.500
.500
4-31
WT./FT.
PLAIN
.31
.54
.74
1.09
1.47
2.17
3.00
3.63
5.02
7.66
10.25
12.51
14.98
20.78
28.57
43.39
54.74
65.42
DOUBLE-EXTRA-STRONG
GRADE A
TEST
PRESSURE
850
850
850
850
850
850
1800
1800
2500
2500
2500
2800
2700
2430
2350
2090
1670
1410
I.D.
(IN.)
WALL
THICK.
(IN.)
WT./FT.
PLAIN
GRADE A
TEST
PRESSURE
.252
.434
.599
.896
1.100
1.503
1.771
2.300
.294
.308
.358
.382
.400
.436
.552
.600
1.71
2.44
3.66
5.21
6.41
9.03
13.70
18.58
1000
1000
1000
2200
2200
2500
2500
2500
3.152
4.063
4.897
6.875
.674
.750
.864
.875
27.54
38.55
53.16
72.42
2800
2800
2800
2800
TADLOCK PIPE
CASING
API CASING REQUIREMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . API CASING (8-ROUND, BUTTRESS & X-LINE)
DIMENSIONAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . API CASING (8-ROUND, BUTTRESS & X-LINE)
PERFORMANCE PROPERTIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NON-API & DISCONTINUED CASING
(DIMENSIONAL DATA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ARMCO SEAL-LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HYDRIL
SUPER EU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FJ/FJ-P. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SUPER FJ/FJ-P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TRIPLESEAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NL ATLAS BRADFORD
FL-4S QUADRASEAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IJ-4S QUADRASEAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VALLOUREC VAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2-4
5-8
9-11
12-15
16-17
18-19
20-23
24-27
28-29
30-31
32-33
TADLOCK PIPE
NOTES
TADLOCK PIPE
API CASING REQUIREMENTS
DRIFT TEST
CASING SIZE
DRIFT MANDREL LENGTH
8-5/8” AND SMALLER
6”
DRIFT MANDREL DIAMETER
I.D. MINUS 1/8”
9-5/8” TO 13-7/8”
12”
I.D. MINUS 5/32”
16” AND LARGER
12”
I.D. MINUS 3/16”
TENSILE REQUIREMENTS
TENSILE STRENGTH
YIELD STRENGTH
GRADE
MIN. PSI
MAX. PSI
MINIMUM PSI
H-40
40,000
80,000
60,000
J-55
55,000
80,000
75,000
K-55
55,000
80,000
95,000
C-75
75,000
90,000
95,000
L-80
80,000
95,000
95,000
N-80
80,000
110,000
100,000
C-95
95,000
110,000
105,000
USS-95
95,000
---
110,000
P-110
110,000
140,000
125,000
V-150
150,000
180,000
160,000
RANGE LENGTHS
RANGE 1
RANGE 2
(FT.)
(FT.)
RANGE 3
(FT.)
TOTAL RANGE LENGTH INCL.
16–25
25–34
34 OR MORE
PERMISSIBLE VARIATION, MAX.
6
5
6
18
18
36
RANGE LENGTH FOR 95% OR MORE OF CARLOAD:
PERMISSIBLE LENGTH, MIN.
VALUES ABOVE FOR RANGE 2 & 3 CASING
APPLY ALSO TO LINERS
TOLERANCES
CASING SIZE
TYPE
DIMENSION
4.000 – 5.000
5.500 – 8.625
TOLERANCE
+7/64” – .75% O.D.
UPSET
O.D. (D)*
+1/8” – .75% O.D.
9.625 & LARGER
+5/32” – .75% O.D.
4.500 & LARGER
NON-UPSET
ALL
---
WALL THICKNESS
+.75% O.D. – .75% O.D.
–12.5%
SIZES
---
I.D.
GOVERNED BY O.D. TOLERANCES
*MEASUREMENTS MADE IMMEDIATELY BEHIND THE UPSET FOR A DISTANCE OF APPROXIMATELY 5 INCHES FOR SIZES 5-1/2” O.D. AND SMALLER, AND A DISTANCE APPROXIMATELY EQUAL TO THE O.D. FOR SIZES LARGER THAN 5-1/2”.
5-1
TADLOCK PIPE
5-2
TADLOCK PIPE
DIMENSIONAL DATA
API CASING
CASING DATA
8 ROUND & BUTTRESS
O.D.
(IN.)
4-1/2
5
5-1/2
6-5/8
7
7-5/8
8-5/8
WEIGHT
T&C
LBS/FT
9.50
10.50
11.60
13.50
15.10
11.50
13.00
15.00
18.00
21.40
24.10
14.00
15.50
17.00
20.00
23.00
20.00
24.00
28.00
32.00
17.00
20.00
23.00
26.00
29.00
32.00
35.00
38.00
24.00
26.40
29.70
33.70
39.00
42.80
47.10
24.00
28.00
32.00
36.00
40.00
44.00
49.00
I.D.
(IN.)
4.090
4.052
4.000
3.920
3.826
4.560
4.494
4.408
4.276
4.126
4.000
5.012
4.950
4.892
4.778
4.670
6.049
5.921
5.791
5.675
6.538
6.456
6.366
6.276
6.184
6.094
6.004
5.920
7.025
6.969
6.875
6.765
6.625
6.501
6.375
8.097
8.017
7.921
7.825
7.725
7.625
7.511
DRIFT
DIAMETER
(IN.)
3.965
3.927
3.875
3.795
3.701
4.435
4.369
4.283
4.151
4.001
3.875
4.887
4.625
4.767
4.653
4.545
5.924
5.796
5.668
5.550
6.413
6.331
6.241
6.151
6.059
5.969
5.879
5.795
6.900
6.844
6.750
6.640
6.500
6.376
6.250
7.972
7.892
7.796
7.700
7.600
7.500
7.386
X-LINE
UPSET
O.D.
(IN.)
I.D.
(IN.)
5.360
5.360
4.198*
4.198
5.860
5.869
5.860
5.860
4.736*
4.701*
4.701
4.610
7.000
7.000
7.000
5.781*
5.731
5.615
7.390
7.390
7.390
7.390
7.530
7.530
6.171*
6.171
6.123
6.032
5.940
5.860
8.010
8.010
8.010
8.010
6.770*
6.770
6.705
6.565
9.120
9.120
9.120
9.120
9.120
7.725*
7.725
7.663
7.565
7.451
PIN LENGTH
8 ROUND
DRIFT
DIAMETER SHORT
LONG
(IN.)
(IN.)
(IN.)
2.000
2.675
2.625
3.000
3.000
3.000
2.500
2.750
3.375
4.151
2.750
3.375
4.151
3.375
3.375
3.375
2.875
4.653
2.875
3.500
4.653
2.875
3.500
4.653
3.500
4.545
3.500
3.125
5.750
3.125
3.875
5.666
3.125
3.875
5.550
3.875
2.375
3.125
4.000
6.151
3.125
4.000
6.151
3.125
4.000
6.059
4.000
5.969
4.000
5.879
4.000
5.795
4.000
3.250
6.750
3.250
4.125
6.750
4.125
6.640
4.125
6.500
4.125
4.125
4.125
3.000
3.375
7.700
3.375
4.500
7.700
3.375
4.500
7.600
4.500
7.500
4.500
7.386
4.500
LENGTH
BUTT
(IN.)
O.D.
(IN.)
SHORT
(IN.)
LONG
(IN.)
BUTT.
(IN.)
X-LINE
(IN.)
5.000
†4.897
6-1/4
7
8-7/8
4.590
4.590
5.563
†5.375
6-1/2
7-3/4
9-1/8
3.826
3.826
3.826
3.826
4.590
4.590
4.590
4.590
6.050
†5.875
6-3/4
8
9-1/4
4.013
4.013
4.013
4.590
4.590
4.590
7.390
†7.000
7-1/4
8-3/4
9-5/8
4.200
4.200
4.200
4.200
4.200
4.200
4.200
4.590
4.590
4.590
4.590
4.590
4.590
4.590
7.656
†7.375
7-1/4
9
10
4.388
4.388
4.388
4.388
4.388
4.388
4.590
4.590
4.590
4.590
8.500
†8.125
7-1/2
9-1/4
10-3/8
4.513
4.513
4.513
4.513
4.513
6.0625
6.0625
6.0625
6.0625
6.0625
9.625
†9.125
7-3/4
10
10-5/8
3.638
3.638
3.638
3.763
3.763
3.763
3.763
3.763
*JOINT WILL NOT PASS API DRIFT TEST.
† SPECIAL CLEARANCE O.D.
8-ROUND
8 THREADS PER INCH AND 3/4” TAPER PER FOOT FOR ALL SIZES
BUTTRESS
5 THREADS PER INCH FOR ALL SIZES
3/4” TAPER PER FOOT FOR SIZES 4-1/2” THRU 13-3/8” CASING
1” TAPER PER FOOT FOR 16” THRU 20” CASING.
X-LINE
6 THREADS PER INCH AND 1-1/2” TAPER PER GOOT FOR SIZES 5” THRU 7-5/8” CASING
5 THREADS PER INCH AND 1-1/4” TAPER PER FOOT FOR SIZES 8-5/8” THRUY 10-3/4” CASING.
5-3
COUPLING
TADLOCK PIPE
API CASING
CASING DATA
8 ROUND & BUTTRESS
O.D.
(IN.)
9-5/8
10-3/4
11-3/4
13-3/8
16
18-5/8
20
WEIGHT
T&C
LBS/FT
32.30
36.00
40.00
43.50
47.00
53.50
32.75
40.50
45.50
51.00
55.50
60.70
65.70
42.00
47.00
54.00
60.00
48.00
54.50
61.00
68.00
72.00
65.00
75.00
84.00
87.50
94.00
106.50
133.00
I.D.
(IN.)
9.001
6.921
8.835
8.765
8.681
8.535
10.192
10.050
9.950
9.850
9.760
9.660
9.560
11.084
11.000
10.880
10.772
12.715
12.615
12.515
12.415
12.347
15.250
15.124
15.010
17.755
19.124
19.000
18.730
DRIFT
DIAMETER
(IN.)
8.845
8.765
8.679
8.599
8.525
8.379
10.036
9.894
9.794
9.694
9.604
9.504
9.404
10.928
10.844
10.724
10.616
12.559
12.459
12.359
12.259
12.191
15.062
14.936
14.822
17.567
18.938
18.812
18.542
PIN LENGTH
X-LINE
UPSET
O.D.
(IN.)
10.100
10.100
10.100
10.100
11.460
11.460
11.460
8 ROUND
DRIFT
DIAMETER SHORT
I.D.
LONG
(IN.)
(IN.)
(IN.)
(IN.)
3.375
3.375
4.750
8.599
8.665*
3.375
4.750
8.599
8.665
4.750
8.525
8.621
4.750
8.379
8.475
4.750
2.750
3.500
9.794
9.819
3.500
9.694
9.719
3.500
9.604
9.629
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
3.500
4.000
4.000
4.000
4.000
4.000
5.250
4.000
5.250
4.000
5.250
COUPLING
LENGTH
BUTT.
(IN.)
X-LINE
(IN.)
O.D.
(IN.)
SHORT
(IN.)
LONG
(IN.)
BUTT.
(IN.)
4.513
4.513
4.513
4.513
4.513
6.0625
6.0625
6.0625
6.0625
10.625
†10.125
7-3/4
10-1/2
10-5/8
4.513
4.513
4.513
4.513
6.0625
6.0625
6.0625
11.750
†11.250
8
---
10-5/8
12.750
8
---
10-5/8
14.375
8
---
10-5/8
17.000
9
---
10-5/8
19.750
9
---
10-5/8
21.000
9
11-1/2
10-5/8
4.513
4.513
4.513
4.513
4.513
4.513
4.513
4.613
4.613
4.613
4.613
4.613
4.613
*JOINT WILL NOT PASS API DRIFT TEST.
† SPECIAL CLEARANCE O.D.
8 ROUND:
8 THREADS PER INCH AND 3/4” TAPER PER FOOT FOR ALL SIZES.
BUTTRESS:
5 THREADS PER INCH FOR ALL SIZES.
3/4” TAPER PER FOOT FOR SIZES 4-1/2” THROUGH 13-3/8” CASING.
1” TAPER PER FOOT FOR 16” THROUGH 20” CASING.
X-LINE:
6 THREADS PER INCH AND 1-1/2” TAPER PER FOOT FOR SIZES 5” THROUGH 7-5/8” CASING.
5 THREADS PER INCH AND 1-1/4” TAPER PER FOOT FOR SIZES 8-5/8” THROUGH 1-3/4” CASING.
5-4
TADLOCK PIPE
PERFORMANCE PROPERTIES
API CASING
SIZE
O.D.
(IN.)
WEIGHT
T&C
(LBS/FT)
9.50
10.50
11.60
4-1/2
13.50
15.10
11.50
13.00
15.00
5
18.00
14.00
15.50
17.00
5-1/2
20.00
23.00
GRADE
K-55
K-55
K-55
L-80
C-95
P-110
L-80
C-95
P-110
P-110
K-55
K-55
K-55
L-80
C-95
P-110
L-80
C-95
P-110
K-55
K-55
K-55
L-80
C-95
P-110
L-80
C-95
P-110
L-80
C-95
P-110
COLLAPSE
PRESSURE
(PSI)
3,310
4,010
4,960
6,350
7,010
7,560
8,540
9,650
10,670
14,320
3,060
4,140
5,550
7,250
8,090
8,830
10,490
12,010
13,450
3,120
4,040
4,910
6,280
6,930
7,460
8,830
10,000
11,080
11,160
12,920
14,520
BURST PRESSURE
ROUND
(PSI)
4,380
4,790
5,350
7,780
9,240
10,690
9,020
10,710
12,410
14,420
4,240
4,870
5,700
8,290
9,840
11,400
10,140
12,040
13,940
4,270
4,810
5,320
7,740
9,190
10,640
9,190
10,910
12,640
10,560
12,540
14,520
BUTT.
(PSI)
--4,790
5,350
7,780
9,240
10,690
9,020
10,710
12,410
13,460
--4,870
5,700
8,290
9,840
11,400
9,910
11,770
13,620
--4,810
5,320
7,740
9,190
10,640
9,190
10,910
12,640
10,560
12,540
14,520
JOINT TENSILE
PIPE
STRENGTH (1000 LB)
YIELD
ROUND
STRENGTH
(1000 LB) SHORT
LONG
BUTT.
X-LINE
152
112
------166
146
--249
--184
170
180
277
--267
--212
291
--317
--234
325
--367
--279
385
--307
--257
334
--364
--284
374
--422
--338
443
--485
--406
509
--182
147
------208
186
201
309
--241
228
246
359
416
350
--295
379
416
416
--326
424
459
481
--388
503
547
422
--376
457
446
501
--416
512
493
580
--495
606
587
222
189
------248
222
239
366
429
273
252
272
402
471
397
--338
428
471
471
--374
480
521
546
--445
568
620
466
--416
503
497
554
--460
563
549
641
--548
667
654
530
--489
550
549
630
--540
608
608
729
--643
724
722
OPTIMUM MAKE-UP TORQUE
SHORT
1120
1460
1700
--------------1470
1860
2280
------------1890
2220
2520
-------------------
RECOMMENDED MAKE-UP TORQUE FOR BUTTRESS CONNECTIONS IS THAT REQUIRED TO PLACE FACE OF COUPLING AT BASE OF THE TRIANGLE STAMP.
5-5
LONG
(FT-LBS)
----1800
2230
2580
3020
2710
3130
3660
4400
--2010
2460
3080
3560
4170
3950
4550
5310
--2390
2720
3410
3960
4620
4200
4870
5690
4930
5720
6680
X-LINE
---
2700
2700
TADLOCK PIPE
PERFORMANCE PROPERTIES
API CASING
SIZE
O.D.
(IN.)
WEIGHT
T&C
(LBS/FT)
20.00
24.00
6-5/8
28.00
32.00
17.00
20.00
23.00
26.00
7
32.00
35.00
38.00
24.00
26.40
7-5/8
29.70
33.70
GRADE
K-55
K-55
L-80
C-95
P-110
L-80
C-95
P-110
L-80
C-95
P-110
H-40
K-55
K-55
L-80
C-95
K-55
L-80
C-95
L-80
C-95
P-110
L-80
C-95
P-110
L-80
C-95
P-110
L-80
C-95
P-110
H-40
K-55
L-80
C-95
L-80
C-95
P-110
L-80
C-95
P-110
COLLAPSE
PRESSURE
(PSI)
2,970
4,560
5,760
6,290
6,710
8,170
9,200
10,140
10,320
11,800
13,200
1,450
2,270
3,270
3,830
4,150
4,320
5,410
5,870
7,020
7,820
8,510
8,600
9,730
10,760
10,180
11,640
13,010
11,390
13,420
15,110
2,040
2,890
3,400
3,710
4,790
5,120
5,340
6,560
7,260
7,850
BURST PRESSURE
ROUND
(PSI)
4,180
5,110
7,440
8,830
10,230
8,810
10,460
12,120
10,040
11,920
13,800
2,310
3,740
4,360
6,340
7,530
4,980
7,240
8,600
8,160
9,690
11,220
9,060
10,760
12,460
9,960
11,830
13,700
10,800
12,820
14,850
2,750
4,140
6,020
7,150
6,890
8,180
9,470
7,900
9,380
10,860
BUTT.
(PSI)
4,180
5,110
7,440
8,830
10,230
8,810
10,460
12,120
9,820
11,660
13,500
----4,360
6,340
7,530
4,980
7,240
8,600
8,160
9,690
11,220
8,460
10,050
11,640
8,460
10,050
11,640
8,460
10,050
11,640
4,140
5,650
6,020
7,150
6,890
8,180
9,470
7,900
9,380
10,860
JOINT TENSILE
PIPE
STRENGTH (1000 LB)
YIELD
ROUND
STRENGTH
(1000 LB) SHORT
LONG
BUTT.
315
267
290
--382
342
372
548
555
--473
592
659
--546
665
763
--641
786
651
--576
693
773
--665
780
895
--781
922
734
--666
783
872
--769
880
1,009
--904
1040
196
122
----316
254
----366
309
341
522
532
--435
565
632
--505
636
415
364
401
592
604
--511
641
717
--593
722
676
--587
718
803
--683
808
929
--797
955
745
--661
791
885
--768
891
1,025
--897
1,053
814
--734
833
966
--853
920
1,119
--996
1,096
877
--801
833
1,041
--931
920
1,205
--1,087
1,096
276
212
----414
342
377
581
602
--482
635
714
--560
716
683
--566
721
811
--659
813
940
--769
960
778
--664
820
923
--772
925
1,069
--901
1,093
OPTIMUM MAKE-UP TORQUE
SHORT
X-LINE
--605
605
668
796
648
716
852
717
793
944
----632
632
699
641
641
709
685
757
902
850
841
1,002
850
940
1,118
917
1,013
1,207
--700
700
774
700
774
922
766
846
1,008
2670
3420
------------------1220
2540
3090
----3640
----------------------------2120
3420
-----------------
RECOMMENDED MAKE-UP TORQUE FOR BUTTRESS CONNECTIONS IS THAT REQUIRED TO PLACE FACE OF COUPLING AT BASE OF THE TRIANGLE STAMP.
5-6
LONG
(FT-LBS)
2900
3720
4730
5490
6410
5760
6650
7810
6660
7690
9040
----3410
4350
5050
4010
5110
5930
5870
6830
7970
6610
7680
8970
7340
8530
9960
8010
9310
10870
-3770
4820
5600
5660
6590
7690
6640
7720
9010
X-LINE
2700
3200
3700
TADLOCK PIPE
PERFORMANCE PROPERTIES
API CASING
SIZE
O.D.
(IN.)
WEIGHT
T&C
(LBS/FT)
39.00
7-5/8
42.80
47.10
24.00
28.00
32.00
36.00
8-5/8
40.00
44.00
49.00
32.30
36.00
40.00
9-5/8
43.50
47.00
53.50
GRADE
L-80
C-95
P-110
C-75
L-80
C-95
P-110
C-75
L-80
C-95
P-110
K-55
H-40
K-55
K-55
L-80
C-95
L-80
C-95
P-110
L-80
C-95
P-110
L-80
C-95
P-110
H-40
K-55
K-55
L-80
C-95
L-80
C-95
P-110
L-80
C-95
P-110
L-80
C-95
P-110
COLLAPSE
PRESSURE
(PSI)
8,810
9,980
11,060
10,240
10,810
12,400
13,910
11,290
12,040
14,300
16,550
1,370
1,640
2,530
3,450
4,100
4,360
5,520
6,010
6,380
6,950
7,730
8,400
8,570
9,690
10,720
1,400
2,020
2,570
3,090
3,330
3,810
4,130
4,430
4,750
5,080
5,310
6,620
7,330
7,930
BURST PRESSURE
ROUND
(PSI)
9,180
10,900
12,620
9,670
10,320
12,250
14,190
10,760
11,480
13,630
15,780
2,950
2,470
3,930
4,460
6,490
7,710
7,300
8,670
10,040
8,120
9,640
11,160
9,040
10,740
12,430
2,270
3,520
3,950
5,750
6,820
6,330
7,510
8,700
6,870
8,150
9,440
7,930
9,410
10,900
BUTT.
(PSI)
9,180
10,900
12,620
9,190
9,790
11,620
13,460
9,190
9,790
11,620
13,460
----3,930
4,460
6,490
7,710
7,300
8,670
10,040
8,120
9,640
11,160
9,040
10,740
12,430
--3,520
3,950
5,750
6,820
6,330
7,510
8,700
6,870
8,150
9,440
7,930
9,410
10,900
PIPE
JOINT TENSILE STRENGTH (1000 LB)
YIELD
ROUND
BUTT.
X-LINE
STRENGTH
LONG
(1000 LB) SHORT
--786
945
851
895
--914
1065
941
1,063
--1,066
1258
1120
1,231
--852
1035
--935
--892
1053
--998
--1,037
1187
--1,185
--1,210
1402
--1,372
--953
1140
--1,031
--997
1160
--1,100
--1,159
1300
--1,306
--1,353
1545
--1,512
263
------381
233
------318
402
452
690
869
503
468
526
780
871
568
--678
864
871
827
--789
976
963
982
--776
966
942
925
--904
1,092
1042
1,098
--1,055
1,288
1240
1,271
--874
1,066
1007
1,021
--1,017
1,206
1113
1,212
--1,186
1,423
1326
1,404
--983
1,180
1007
1,129
--1,144
1,334
1113
1,341
--1,335
1,574
1326
1,553
254
------365
423
489
755
--564
486
561
843
975
630
--727
947
975
916
--847
1,074
1078
1,088
--813
1038
975
1,055
--948
1178
1078
1,193
--1,106
1388
1283
1,381
--893
1122
1032
1,086
--1,040
1273
1141
1,289
--1,213
1500
1358
1,493
--1,047
1286
1173
1,244
--1,220
1456
1297
1,477
--1,422
1718
1544
1,710
OPTIMUM MAKE-UP TORQUE
SHORT
----------------------2,330
2,330
4,020
4,680
----------------------2,540
4,230
4,860
-----------------------
RECOMMENDED MAKE-UP TORQUE FOR BUTTRESS CONNECTIONS IS THAT REQUIRED TO PLACE FACE OF COUPLING AT BASE OF THE TRIANGLE STAMP.
5-7
LONG
X-LINE
(FT.-LBS)
7860
9140
10660
8520
8920
10370
3700
12100
9530
9970
11590
13530
----4520
5260
6780
7890
7760
9040
4200
10550
8740
10170
11860
9830
11440
13350
--4890
5610
7270
8470
8130
9480
11060
4700
8930
10400
12130
10470
12200
14220
TADLOCK PIPE
API CASING
SIZE
O.D.
(IN.)
WEIGHT
T&C
(LBS/FT)
32,75
40.50
45.50
51.00
10-3/4
55.50
11-3/4
60.70
65.70
42.00
47.00
54.00
60.00
13-3/8
16
18-5/8
20
48.00
54.50
61.00
68.00
72.00
65.00
75.00
84.00
87.50
94.00
106.10
133.00
GRADE
H-40
K-55
K-55
K-55
L-80
C-95
P-110
L-80
C-95
P-110
P-110
P-110
H-40
K-55
K-55
K-55
L-80
C-95
H-40
K-55
K-55
K-55
L-80
C-95
H-40
K-55
K-55
K-55
K-55
K-55
K-55
COLLAPSE
PRESSURE
(PSI)
880
1,580
2,090
2,700
3,220
3,490
3,670
4,020
4,300
4,630
5,860
7,490
1,070
1,510
2,070
2,660
3,180
3,440
770
1,130
1,540
1,950
2,670
2,820
670
1,020
1,410
630
520
770
1,500
PIPE
JOINT TENSILE STRENGTH (1000 LB)
YIELD
ROUND
BUTT.
X-LINE
BUTT. STRENGTH
LONG
(PSI) (1000 LB) SHORT
367
205
------629
450
--819
3,130
715
528
--931
1236
3,580
801
606
--1043
1383
4,030
1,185
794
--1190
1383
5,860
1,383
927
--1354
1529
6,960
1,602
1,080
--1594
1820
6,060
1,276
884
--1303
1515
6,450
1,515
1,032
--1483
1875
7,860
1,754
1,203
--1745
1993
8,860
1,922
1,338
--1912
2000
9,760
1,472
--2077
10,650 2,088
478
307
------737
509
--935
3,070
850
606
--1079
3,560
952
693
--1208
4,010
1,384
913
--1399
5,830
1,644
1,066
--1596
6,920
541
322
------853
547
--1038
2,730
962
633
--1169
3,090
1,069
718
--1300
3,450
1,661
1,029
--1650
5,380
1,973
1,204
--1893
6,390
736
439
------1,178
752
--1331
2,630
1,326
865
--1499
2,980
1,367
794
--1427
2,250
1,480
824
955
1479
2,110
1,685
960
1,113
1683
2,410
2,125
1,253
1,453
2123
3,060
BURST PRESSURE
OPTIMUM MAKE-UP TORQUE
ROUND
(PSI)
1,820
3,130
3,580
4,030
5,860
6,960
8,060
6,450
7,660
8,860
9,760
10,650
1,980
3,070
3,560
4,010
5,830
6,920
1,730
2,730
3,090
3,450
5,380
6,390
1,640
2,630
2,980
2,250
2,110
2,410
3,060
SHORT
2050
4500
5280
6060
7940
9270
10800
8840
10320
12030
13380
14720
3070
5090
6060
6930
9130
10660
3220
5470
6330
7180
10290
12040
4390
7520
8650
7940
8240
9600
12530
RECOMMENDED MAKE-UP TORQUE FOR BUTTRESS CONNECTIONS IS THAT REQUIRED TO PLACE FACE OF COUPLING AT BASE OF THE TRIANGLE STAMP.
5-8
LONG
X-LINE
(FT.-LBS)
----------5200
------------------------------------------------------9550
11130
--14530
TADLOCK PIPE
DIMENSIONAL DATA
COMPOSITE CASING DIMENSIONAL DATA
NON API & DISCONTINUED API CASING
SIZE
O.D.
(IN.)
4-1/2
4-3/4
5
5-1/4
5-1/2
WEIGHT
(LBS/FT)
NOM.
PLAIN
T&C
END
6.75
6.59
--8.64
11.00
10.79
--11.77
12.80
12.24
16.60
16.52
17.70
--18.80
18.69
19.10
18.96
21.60
--24.60
--26.50
--7.25
7.11
9.50
9.39
--12.47
*16.00
15.75
18.00
17.52
20.00
19.40
21.00
20.66
8.00
7.80
12.80
12.53
20.30
20.01
20.80
20.63
21.00
20.67
23.20
23.09
24.20
24.03
--25.34
8.50
8.32
10.00
9.85
13.00
12.89
16.00
15.91
9.00
8.79
*13.00
12.84
*15.00
14.71
--15.08
--13.86
25.00
24.76
INSIDE
DIAMETER
(IN.)
DECIMAL
4.216
4.124
4.062
3.980
3.958
3.754
3.696
3.640
3.626
3.500
3.380
3.240
4.460
4.364
4.230
4.082
4.000
3.910
3.850
4.696
4.506
4.184
4.156
4.154
4.044
4.000
3.938
4.944
4.886
4.768
4.648
5.192
5.044
4.974
4.960
4.730
4.580
DRIFT
DIAMETER
(IN.)
4.091
3.999
3.937
3.855
3.833
3.629
3.571
3.515
3.501
3.375
3.255
3.115
4.335
4.239
4.105
3.957
3.875
3.785
3.725
4.571
4.381
4.059
4.031
4.029
3.919
3.875
3.813
4.819
4.761
4.643
4.523
5.068
4.919
4.849
4.835
4.605
4.455
SIZE
O.D.
(IN.)
5-1/2
5-9/16
5-3/4
6
6-5/8
7
*DISCONTINUED API CASING.
5-9
WEIGHT
(LBS/FT)
NOM.
PLAIN
T&C
END
26.00
25.54
26.80
26.70
--28.18
29.70
29.64
32.00
31.95
--32.54
36.40
--15.00
14.62
--20.78
*14.00
13.55
*17.00
16.35
*19.50
19.10
*22.50
21.79
25.20
24.43
10.50
10.22
12.00
11.79
14.00
13.82
*15.00
14.65
*16.00
15.35
--16.52
17.00
16.81
*18.00
17.57
*20.00
19.64
*23.00
22.81
26.00
25.58
12.00
11.65
13.00
12.72
*17.00
16.69
--18.33
19.45
18.97
22.00
21.42
25.20
22.18
26.50
26.21
*29.00
28.57
34.00
33.61
13.00
12.65
--19.41
INSIDE
DIAMETER
(IN.)
DECIMAL
4.548
4.500
4.438
4.376
4.276
4.250
4.090
5.047
4.813
5.290
5.190
5.090
4.990
4.890
5.672
5.620
5.552
5.542
5.500
5.460
5.450
5.424
5.352
5.240
5.140
6.287
6.255
6.135
6.085
6.065
5.989
5.965
5.837
5.761
5.595
6.652
6.460
DRIFT
DIAMETER
(IN.)
4.423
4.375
4.313
4.251
4.151
4.125
3.965
4.922
4.688
5.165
5.065
4.965
4.865
4.765
5.547
5.495
5.472
5.399
5.375
5.335
5.325
5.299
5.227
5.115
5.012
6.162
6.130
6.010
5.960
5.940
5.864
5.840
5.712
5.636
5.047
6.527
6.335
TADLOCK PIPE
DIMENSIONAL DATA
COMPOSITE CASING DIMENSIONAL DATA
NON API & DISCONTINUED API CASING
SIZE
O.D.
(IN.)
7
7-5/8
7-3/4
8
8-1/8
WEIGHT
(LBS/FT)
NOM.
PLAIN
T&C
END
33.00
31.88
*22.00
21.54
*24.00
23.64
*28.00
27.73
29.50
29.25
*30.00
29.71
33.70
33.17
34.00
33.42
35.30
34.71
40.00
39.89
--40.39
42.70
42.55
44.00
43.47
--45.30
--47.10
--48.88
--50.06
--52.97
--53.72
--55.49
14.75
14.39
*20.00
19.69
--21.21
36.00
35.20
38.00
36.98
42.50
42.39
45.30
44.67
--47.74
51.20
50.97
--52.57
--55.07
--59.15
46.10
45.47
--48.60
--51.89
--56.07
16.00
15.52
20.00
19.57
--23.09
26.00
25.22
*28.00
26.67
*32.00
30.64
*35.50
34.56
*39.50
38.42
41.70
40.70
INSIDE
DIAMETER
(IN.)
DECIMAL
6.384
6.398
6.336
6.214
6.168
6.154
6.048
6.040
6.000
5.836
5.820
5.750
5.720
5.660
5.562
5.540
5.500
5.400
5.374
5.312
7.263
7.125
7.085
6.705
6.655
6.501
6.435
6.345
6.249
6.201
6.125
5.999
6.560
6.470
6.374
6.250
7.628
7.528
7.440
7.386
7.485
7.385
7.285
7.185
7.125
DRIFT
DIAMETER
(IN.)
6.259
6.273
6.151
6.089
6.043
6.029
5.923
5.915
5.875
5.711
5.695
5.625
5.595
5.535
5.500
5.415
5.375
5.275
5.250
5.187
7.138
7.000
6.960
6.580
6.530
6.376
6.310
6.250
6.125
6.076
6.000
5.875
6.500
6.375
6.250
6.125
7.503
7.403
7.315
7.261
7.360
7.260
7.160
7.060
7.000
SIZE
O.D.
(IN.)
8-5/8
8-3/4
9
9-5/8
9-3/4
9-7/8
10
10-3/4
*DISCONTINUED API CASING.
5-10
WEIGHT
(LBS/FT)
NOM.
PLAIN
T&C
END
17.50
16.94
20.00
19.49
25.55
24.70
--24.96
29.35
28.55
32.40
31.27
*38.00
37.22
*43.00
42.32
48.00
46.95
52.00
51.03
49.70
--19.00
18.42
--26.98
*34.00
32.78
*38.00
36.91
50.20
49.21
*55.00
53.32
*40.00
38.92
*45.00
44.02
*29.30
28.04
38.00
36.57
42.00
40.63
58.40
57.38
59.40
58.64
--60.08
61.10
60.71
64.90
64.26
--65.67
70.30
69.70
71.80
71.09
--76.51
59.20
--62.80
--22.75
21.85
30.25
29.37
--30.07
41.50
41.01
45.50
44.22
50.50
49.96
55.50
55.13
35.75
34.24
40.00
38.66
45.00
43.68
48.00
46.76
INSIDE
DIAMETER
(IN.)
DECIMAL
8.249
8.191
8.071
8.065
7.981
7.917
7.775
7.651
7.537
7.435
7.636
8.608
8.420
8.290
8.196
7.910
7.812
8.150
8.032
9.063
8.885
8.799
8.435
8.407
8.375
8.375
8.281
8.249
8.157
8.125
7.999
8.560
8.625
9.582
9.434
9.420
9.200
9.120
9.016
8.908
10.136
10.054
9.960
9.902
DRIFT
DIAMETER
(IN.)
8.124
8.066
7.946
7.940
7.856
7.792
7.590
7.526
7.412
7.310
7.500
8.483
8.295
8.165
8.071
7.785
7.687
8.025
7.907
8.907
8.760
8.674
8.279
8.251
8.250
8.219
8.125
8.093
8.001
7.969
7.843
8.500
8.500
9.457
9.309
9.295
9.075
8.995
8.891
8.783
10.011
9.929
9.835
9.777
TADLOCK PIPE
DIMENSIONAL DATA
COMPOSITE CASING DIMENSIONAL DATA
NON API & DISCONTINUED API CASING
SIZE
O.D.
(IN.)
10-3/4
11
11-3/4
12
12-3/4
13
13-3/8
13-1/2
13-5/8
14
WEIGHT
(LBS/FT)
NOM.
PLAIN
T&C
END
54.00
52.96
--54.74
71.10
69.89
73.20
72.33
79.20
78.52
81.00
79.10
26.75
25.78
--35.39
*38.00
36.69
--40.25
65.00
--66.70
65.45
71.00
--73.60
72.46
80.50
79.51
87.20
86.36
31.50
30.51
40.00
38.46
--38.70
43.00
41.19
45.45
43.77
51.15
49.56
53.00
51.48
--65.42
36.50
35.25
40.00
38.17
45.00
43.33
--47.29
50.00
48.47
54.00
52.52
77.00
--80.70
--*83.00
81.86
85.00
82.90
88.00
--92.60
91.17
98.00
97.16
81.40
--88.20
--42.00
40.45
50.00
47.89
--51.02
57.00
54.57
INSIDE
DIAMETER
(IN.)
DECIMAL
9.784
9.750
9.450
9.406
9.282
9.250
10.552
10.380
11.150
11.090
10.682
10.656
10.586
10.532
10.406
10.282
11.514
11.384
11.350
12.130
12.090
12.000
11.970
11.750
12.482
12.438
12.360
12.300
12.282
12.220
10.711
12.215
12.175
12.159
12.125
12.031
11.937
12.340
12.375
13.448
13.344
13.300
13.250
DRIFT
DIAMETER
(IN.)
9.659
9.625
9.294
9.250
9.126
9.094
10.396
10.224
10.996
10.934
10.526
10.500
10.430
10.376
10.250
10.126
11.358
11.228
11.194
11.974
11.934
11.844
11.814
11.594
12.326
12.282
12.204
12.144
12.126
12.064
10.625
12.059
12.019
12.003
11.969
11.875
11.781
12.250
12.250
13.292
13.188
13.144
13.094
SIZE
O.D.
(IN.)
15
16
17
18
18-5/8
20
21-1/2
22
24
24-1/2
30
*DISCONTINUED API CASING
5-11
WEIGHT
(LBS/FT)
NOM.
PLAIN
T&C
END
47.50
45.71
61.15
58.57
--59.33
52.50
50.63
*55.00
52.36
--63.39
70.00
66.80
109.00
107.50
128.00
126.94
146.00
146.05
73.20
69.70
--70.58
78.00
75.74
81.20
76.84
--81.60
--81.97
84.00
82.06
87.50
85.44
96.50
94.72
78.00
75.00
--73.09
96.50
93.96
90.00
87.22
90.00
85.58
90.00
84.75
--104.10
133.00
--169.00
--92.50
89.03
103.00
100.07
114.00
111.05
92.50
89.78
--101.00
103.00
100.41
114.00
111.67
---114.80
100.50
97.60
113.00
110.22
304.00
--100.50
92.60
113.00
109.28
235.00
--310.00
---
INSIDE
DIAMETER
(IN.)
DECIMAL
14.418
14.250
14.240
15.396
15.375
15.240
15.198
14.688
14.438
14.188
16.214
17.250
17.194
17.182
17.130
17.126
17.124
17.088
16.986
17.855
17.875
17.655
19.166
19.182
19.190
19.000
18.750
18.376
20.710
20.610
20.510
21.222
21.125
21.128
21.028
21.000
23.226
23.124
21.500
23.750
23.650
28.500
28.000
DRIFT
DIAMETER
(IN.)
14.262
14.094
14.084
15.209
15.188
15.053
15.011
14.500
14.250
14.000
16.027
17.063
17.007
16.995
16.943
16.939
16.937
16.900
16.799
17.668
17.688
17.468
18.979
18.995
19.003
18.818
18.563
18.188
20.523
20.423
20.323
21.035
20.938
20.941
20.841
20.813
23.039
22.937
21.313
23.563
23.463
28.313
27.813
TADLOCK PIPE
DIMENSIONAL DATA
ARMCO SEAL-LOCK CASING
API
SIZE
COUPLING
WEIGHT
DRIFT
PIN
O.D.
O.D.
T&C
I.D.
DIAMETER
LENGTH
REG.
SPEC.CL.
LENGTH
(IN.)
(LBS/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
9.50
4.090
3.965
10.50
4.052
3.927
11.60
4.000
3.875
3.281
5.000
4.875
7-1/4
13.50
3.920
3.795
15.10
3.826
3.701
14.00
5.012
4.887
15.50
4.950
4.825
17.00
4.892
4.767
3.594
6.050
5.875
7-7/8
20.00
4.778
4.653
23.00
4.670
4.545
17.00
6.538
6.413
20.00
6.456
6.331
23.00
6.366
6.241
26.00
6.276
6.151
29.00
6.184
6.059
4.094
7.656
7.375
8-7/8
32.00
6.094
5.969
35.00
6.004
5.879
38.00
5.920
5.795
24.00
7.025
6.900
26.40
6.969
6.844
29.70
6.875
6.750
4.313
8.500
8.125
9-1/4
33.70
6.765
6.640
39.00
6.625
6.500
45.30
6.435
6.310
24.00
8.097
7.972
28.00
8.017
7.892
32.00
7.921
7.796
36.00
7.825
7.700
4.781
9.625
9.125
10-1/4
40.00
7.725
7.600
44.00
7.625
7.500
49.00
7.511
7.386
4-1/2
5-1/2
7
7-5/8
8-5/8
1-1/4” TAPER PER FOOT.
5 THREADS PER INCH.
5-12
TADLOCK PIPE
PERFORMANCE PROPERTIES
ARMCO NU-LOCK CASING
COLLAPSE PRESSURE
BURST PRESSURE
K-55
N-80
P-110
PSI
PSI
3310
---
OPTIMUM MAKE
PIPE YIELD STRENGTH*
UP TORQUE
K-55
N-80
P-110
K-55
N-80
P-110
ALL GRADES
PSI
PSI
PSI
PSI
1000#
1000#
1000#
(FT.-LBS)
---
4380
---
---
152
---
---
4010
---
---
4790
---
---
165
---
---
4960
6350
7560
5350
7780
10690
184
267
367
---
8540
10670
---
9020
12410
---
307
422
---
---
14320
---
---
14420
---
---
485
3120
---
---
4270
---
---
222
---
---
4040
---
---
4810
---
---
248
---
---
4910
6280
7460
5320
7740
10640
273
397
546
---
8830
11080
---
9190
12640
---
466
641
---
11160
14520
---
10560
14520
---
530
729
---
---
---
---
---
---
---
---
---
2270
---
---
3740
---
---
316
---
---
3270
3830
---
4360
6340
---
366
532
---
4320
5410
6210
4980
7240
9960
415
604
830
---
7020
8510
---
8160
11220
---
676
929
---
8600
10760
---
9060
12460
---
745
1025
---
10180
13010
---
9960
13700
---
814
1119
---
11390
15110
---
10800
14850
---
877
1194†
---
---
---
---
---
---
---
---
---
2890
3400
---
4140
6020
---
414
602
---
---
4790
5340
---
6890
9470
---
683
940
---
6560
7850
---
7900
10860
---
778
1069
---
8810
11060
---
9180
12620
---
895
1231
---
---
---
---
---
---
---
---
---
1370
---
---
2950
---
---
381
---
---
---
---
---
---
---
---
---
---
---
2530
---
---
3930
---
---
503
---
---
3450
4100
---
4460
6490
---
568
827
---
---
5520
6380
---
7300
10040
---
925
1271
---
6950
8400
---
8120
11160
---
1021
1404
---
8570
10720
---
9040
12430
---
1129
1553
*JOINT STRENGTH MEETS OR EXCEEDS 100% EXCEPT AS NOTED BELOW.
†
JOINT STRENGTH IS SHOWN AND IS LESS THAN THE PIPE YIELD STRENGTH.
ºMAKE-UP TORQUE FOR SPECIAL CLEARANCE ITEMS (NONE SHOWN ON THIS CHART) WILL BE 1000 FT.-LBS. LESS.
5-13
1600
3500
5000
5500
6000
TADLOCK PIPE
DIMENSIONAL DATA
ARMCO SEAL-LOCK CASING
API
SIZE
COUPLING
WEIGHT
DRIFT
PIN
O.D.
O.D.
T&C
I.D.
DIAMETER
LENGTH
REG.
SPEC. CL.
LENGTH
(IN.)
(LBS/FT)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
32.30
9.001
8.845
36.00
8.921
8.765
40.00
8.835
8.679
43.50
8.755
8.599
47.00
8.681
8.525
4.781
10.625
10.250
10-1/4
53.50
8.535
8.379
58.40
8.435
8.279
61.10
8.375
8.219
71.80
8.125
7.969
32.75
10.192
10.036
40.50
10.050
9.894
45.50
9.950
9.794
51.00
9.850
9.694
4.781
11.750
11.250
10-1/4
55.50
9.760
9.604
60.70
9.660
9.504
66.70
9.560
9.404
71.10
9.450
9.294
48.00
12.715
12.559
54.50
12.615
12.459
61.00
12.515
12.359
4.813
14.375
---
10-1/4
68.00
12.415
12.259
72.00
12.347
12.191
9-5/8
10-3/4
13-3/8
1-1/4” TAPER PER FOOT.
5 THREADS PER INCH.
5-14
TADLOCK PIPE
PERFORMANCE PROPERTIES
ARMCO NU-LOCK CASING
COLLAPSE PRESSURE
BURST PRESSURE
OPTIMUM MAKE
PIPE YIELD STRENGTH*
UP TORQUE
K-55
N-80
P-110
K-55
N-80
P-110
K-55
N-80
P-110
ALL GRADES
PSI
PSI
PSI
PSI
PSI
PSI
1000#
1000#
1000#
(FT.-LBS)
---
---
---
---
---
---
---
---
---
2020
---
---
3520
---
---
564
---
---
2570
3090
---
3950
5750
---
630
916
---
---
3810
4430
---
6330
8700
---
1005
1381
---
4750
5310
---
6870
9440
---
1086
1493
---
6620
7930
---
7930
10900
---
1244
1710
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
1580
---
---
3130
---
---
629
---
---
2090
---
---
3580
---
---
715
---
---
2700
3220
3670
4030
5860
8060
801
1165
1602
---
4020
4630
---
6450
8860
---
1276
1754
---
---
5860
---
---
9760
---
---
1922
---
---
7490
---
---
10650
---
---
2088
---
---
9280
---
---
11640
---
---
2269
---
---
---
---
---
---
---
---
---
1130
---
---
2730
---
---
853
---
---
1540
---
---
3090
---
---
962
---
---
1950
2260
---
3450
5020
---
1069
1555
---
---
2670
2880
---
5380
7400
---
1661
2596
*JOINT STRENGTH MEETS OR EXCEEDS 100%.
†MAKE-UP TORQUE FOR SPECIAL CLEARANCE ITEMS (NONE SHOWN ON THIS CHART) WILL BE 1000 FT.-LBS LESS.
5-15
7000
7500
7500
TADLOCK PIPE
DIMENSIONAL DATA
HYDRIL “SUPER EU” CASING
API
SIZE
CONNECTION
DRIFT
PIN
O.D.
WEIGHT
I.D.
DIAMETER
LENGTH
O.D.
I.D.
(IN.)
LBS/FT.
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
15
4.408
4.283
3.062
5.370
4.328
18
4.276
4.151
3.062
5.420
4.196
20.3
4.184
4.059
3.062
5.420
4.104
23.2
4.044
3.919
3.062
5.420
3.964
15.5
4.950
4.825
3.437
5.900
4.870
17
4.892
4.767
3.437
5.900
4.812
20
4.778
4.653
3.437
6.000
4.698
23
4.670
4.545
3.437
6.000
4.590
26
4.548
4.423
3.419
6.068
4.468
24
5.921
5.796
3.812
7.072
5.841
28
5.791
5.666
3.812
7.072
5.711
32
5.675
5.550
3.794
7.152
5.595
23
6.366
6.241
3.750
7.444
6.286
26
6.276
6.151
3.750
7.444
6.196
29
6.184
6.059
3.732
7.572
6.104
32
6.094
5.969
3.732
7.572
6.014
35
6.004
5.879
3.732
7.572
5.924
38
5.920
5.795
3.732
7.635
5.840
26.4
6.969
6.844
4.125
8.125
6.889
29.7
6.875
6.750
4.125
8.250
6.795
33.7
6.765
6.640
4.125
8.250
6.685
39
6.625
6.500
4.125
8.250
6.545
45.3
6.435
6.310
4.107
8.312
6.355
32
7.921
7.796
4.125
9.135
7.841
36
7.825
7.700
4.125
9.135
7.745
40
7.725
7.600
4.125
9.135
7.645
44
7.625
7.500
4.107
9.300
7.545
49
7.511
7.386
4.107
9.300
7.431
36
8.921
8.765
4.187
10.165
8.811
40
8.835
8.697
4.187
10.165
8.725
43.5
8.755
8.599
4.187
10.165
8.655
47
8.681
8.525
4.187
10.165
8.581
53.5
8.535
8.379
4.187
10.165
8.435
58.4
8.435
8.279
4.187
10.165
8.355
45.5
9.950
9.794
4.687
11.250
9.850
51
9.850
9.694
4.669
11.375
9.750
55.5
9.760
9.604
4.669
11.375
9.660
60.7
9.660
9.504
4.651
11.500
9.560
65.7
9.560
9.404
4.651
11.500
9.460
5
5-1/2
5-5/8
7
7-5/8
8-5/8
9-5/8
10-3/4
6 THREADS PER INCH FOR 5” THROUGH 7” CASING.
4 THREADS PER INCH FOR 7-5/8” THROUGH 10-3/4” CASING.
5-16
TADLOCK PIPE
PERFORMANCE PROPERTIES
COLLAPSE PRESSURE
BURST PRESSURE
PIPE YIELD STRENGTH*
RECOMMENDED MAKE-UP TORQUE
K-55
N/L-80
P-110
K-55
N/L-80
P-110
K-55
N-80
P-110
K-55 & N/L-80
P-110
PSI
PSI
PSI
PSI
PSI
PSI
1000#
1000#
1000#
(FT.-LBS)
(FT.-LBS)
5,000
7,000
6,000
8,000
7,500
10,000
8,500
12,000
9,000
13,000
11,000
15,000
13,000
17,000
15,000
19,000
5550
7250
8830
5700
8290
11400
241
350
481
7390
10490
13450
6970
10140
13940
290
422
580
8240
11990
16490
7850
11420
15710
324
471
647
9510
13830
19020
9200
13380
18400
373
543
691†
4040
4990
5610
4810
7000
9630
248
362
497
4910
6280
7460
5320
7740
10640
273
397
546
6610
8830
11080
6320
9190
12640
321
466
641
7670
11160
14520
7260
10560
14530
365
530
729
8700
12650
17390
8330
12120
16660
413
601
826
4560
5760
6710
5110
7440
10230
382
555
763
6170
8170
10140
6060
8810
12120
447
651
895
7320
10320
13200
6900
10040
13800
504
734
1009
3270
3830
4450
4360
6340
8720
366
532
732
4320
5410
6210
4980
7240
9960
415
604
830
5400
7020
8510
5610
8160
11220
465
676
929
6460
8600
10760
6230
9060
12480
512
745
1025
7270
10180
13010
6850
9960
13700
559
814
1119
7830
11390
15110
7420
10800
14850
603
877
1205
2890
3400
3930
4140
6020
8280
414
602
827
3910
4790
5340
4730
6890
9470
469
633
940
5090
6560
7850
5430
7890
10860
535
778
1069
---
8810
11060
---
9180
12620
615
895
1231
7910
11510
15420
7510
10920
15020
723
1051
1444†
2530
3050
3430
3930
5710
7860
503
732
1006
3450
4100
4700
4460
6490
8930
568
827
1137
4400
5520
6380
5020
7300
10040
636
925
1271
5350
6950
8400
5580
8120
11160
702
1021
1404
---
8570
10710
---
9040
12430
776
1129
1553
2020
2370
2470
3520
5120
7040
564
820
1128
2570
3090
3480
3950
5750
7900
630
916
1260
3250
3810
4430
4350
6330
8700
691
1005
1381
3880
4750
5310
4720
6870
9440
746
1086
1493
---
6620
7930
---
7930
10900
855
1244
1639†
---
8250
10260
---
8860
12180
928
1311†
1639†
2090
2480
2610
3580
5210
7160
715
1041
1430
2700
3220
3670
4030
5860
8060
801
1165
1602
3390
4020
4630
4430
6450
8860
877
1276
1754
---
5160
5860
---
7100
9760
961
1390
1922
--6300
7490
--7750
10650
*JOINT EFFICIENCY 100% OR MORE EXCEPT AS NOTED BELOW.
† JOINT STRENGTH IS SHOWN AND IS LESS THAN THE PIPE YIELD STRENGTH.
1134
1519
2080
5-17
TADLOCK PIPE
DIMENSIONAL DATA
HYDRIL FJ/FJ-P CASING
API
PLAIN
SIZE
CONNECT.
END
TYPE
WEIGHT
CONNECTION
DRIFT
PIN
I.D.
DIAMETER
LENGTH
I.D.
(LBS/FT.)
(IN.)
(IN.)
(IN.)
(IN.)
O.D.
WEIGHT
(IN.)
(LBS/FT)
4-1/2
12.6
FJ
12.24
3.958
3.833
2.750
3.958
4-1/2
13.5
FJ
13.04
3.920
3.795
2.750
3.920
4-1/2
15.1
FJ-P
14.98
3.826
3.701
2.750
3.826
4-1/2
18.8
FJ-P
18.69
3.640
3.515
2.750
3.640
5
15
FJ
14.87
4.408
4.283
2.940
4.408
5
18
FJ-P
17.93
4.276
4.151
3.000
4.276
5
20.3
FJ-P
20.01
4.184
4.059
3.000
4.184
5
20.8
FJ-P
20.63
4.156
4.031
3.000
4.156
5
23.2
FJ-P
23.09
4.044
3.919
3.000
4.044
5
24.1
FJ-P
24.03
4.000
3.875
3.000
4.000
5-1/2
17
FJ
16.87
4.892
4.767
3.310
4.892
5-1/2
20
FJ-P
19.81
4.778
4.653
3.375
4.778
5-1/2
23
FJ-P
22.54
4.670
4.545
3.438
4.670
5-1/2
26
FJ-P
25.54
4.548
4.423
3.438
4.548
6-5/8
24
FJ
23.58
5.921
5.796
3.630
5.921
6-5/8
28
FJ-P
27.65
5.791
5.666
3.688
5.791
6-5/8
32
FJ-P
31.20
5.675
5.550
3.688
5.675
7
23
FJ
22.63
6.366
6.241
3.030
6.366
7
26
FJ-P
25.66
6.276
6.151
3.625
6.276
7
29
FJ-P
28.72
6.184
6.059
3.688
6.184
7
32
FJ-P
31.68
6.094
5.969
3.688
6.094
7
35
FJ-P
34.58
6.004
5.879
3.750
6.004
7
38
FJ-P
37.26
5.920
5.795
3.750
5.920
7-5/8
26.4
FJ-P
25.56
6.969
6.844
3.625
6.969
7-5/8
29.7
FJ-P
29.04
6.875
6.750
3.625
6.875
7-5/8
33.7
FJ-P
33.04
6.765
6.640
3.688
6.765
7-5/8
39
FJ-P
38.05
6.625
6.500
3.750
6.625
7-5/8
45.3
FJ-P
44.67
6.435
6.310
3.750
6.435
7-3/4
46.1
FJ-P
45.47
6.560
6.500(1)
3.750
6.560
8-5/8
32
FJ-P
31.10
7.921
7.796
3.656
7.921
8-5/8
36
FJ-P
35.14
7.825
7.700
3.656
7.825
8-5/8
40
FJ-P
39.29
7.725
7.600
3.750
7.725
8-5/8
44
FJ-P
43.39
7.625
7.500
3.750
7.625
8-5/8
49
FJ-P
48.00
7.511
7.386
3.750
7.511
8-5/8
52
FJ-P
51.03
7.435
7.310
4.130
7.435
9-5/8
36
FJ-P
34.86
8.921
8.765
3.656
8.921
9-5/8
40
FJ-P
38.94
8.35
8.679
3.688
8.835
9-5/8
43.5
FJ-P
42.70
8.755
8.599
3.688
8.755
9-5/8
47
FJ-P
46.14
8.681
8.525
3.688
8.681
9-5/8
53.5
FJ-P
52.85
8.535
8.379
4.125
8.535
9-5/8
58.4
FJ-P
57.38
8.435
8.279
4.125
8.435
(1) NOT TO API DRIFT SPECIFICATIONS
{ BRACKETED WEIGHTS ARE INTERCHANGEABLE
HYDRIL FJ/FJ-P CASING CONNECTION INTERCHANGEABLE WITH HYDRIL SUPER FJ/SUPER FJ-P “P”-FEATURED CONNECTIOINS ARE NOT INTERCHANGEABLE WITH NON-”P”-FEATURED CONNECTIONS.
5-18
TADLOCK PIPE
PERFORMANCE PROPERTIES
HYDRIL FJ/FJ-P CASING
PIPE COLLAPSE PRESSURE
PIPE BURST PRESSURE
JOINT YIELD STRENGTH†
K-55
N/L-80
P-110
K-55
N/L-80
P-110
C-75/L-80
N/L-80
P-110
PSI
PSI
PSI
PSI
PSI
PSI
1000#
1000#
1000#
OPTIMUM MAKE-UP TORQUE
K-55
N/L-80
P-110
---
---
---
---
---
---
180
189
227
1,500
1,500
2,200
6,420
8,540
10,670
6,200
9,020
12,410
180
189
227
1,500
1,500
2,200
7,620
11,080
14,320
7,210
10,480
14,420
220
232
290
1,500
1,500
2,200
9,510
13,830
19,010
9,200
13,380
18,390
220
232
290
1,500
1,500
2,200
5,550
7,250
8,830
5,700
8,290
11,400
209
220
276
1,900
1,900
2,800
7,390
10,490
13,450
6,970
10,140
13,940
267
281
351
1,900
1,900
2,800
8,240
11,990
16,490
7,850
11,420
15,710
267
281
351
1,900
1,900
2,800
8,500
12,360
17,000
8,120
11,820
16,250
267
281
351
1,900
1,900
2,800
9,510
13,830
19,020
9,200
13,380
18,400
267
281
351
1,900
1,900
2,800
9,900
14,400
19,800
9,630
14,000
19,250
267
281
351
1,900
1,900
2,800
4,910
6,280
7,460
5,320
7,740
10,640
239
252
315
2,300
2,300
3,400
6,620
8,830
11,080
6,320
9,190
12,640
296
311
389
2,300
2,300
3,400
7,670
11,160
14,520
7,260
10,560
14,530
296
311
389
2,300
2,300
3,400
8,700
12,650
17,390
8,330
12,120
16,660
296
311
389
2,300
2,300
3,400
4,560
5,760
6,710
5,110
7,440
10,230
320
337
421
3,200
3,200
4,800
6,170
8,170
10,140
6,060
8,810
12,120
409
431
539
3,200
3,200
4,800
7,320
10,320
13,210
6,900
10,040
13,800
409
431
539
3,200
3,200
4,800
3,270
3,830
4,450
4,360
6,340
8,720
326
343
429
3,500
3,500
4,500
4,320
5,410
6,210
4,980
7,240
9,950
380
400
500
3,500
3,500
5,000
5,4000
7,020
8,510
5,610
8,160
11,220
419
441
551
3,500
3,500
5,000
6,460
8,600
10,760
6,230
9,060
12,460
457
481
601
3,500
3,500
5,000
7,270
10,180
13,010
6,850
9,960
13,700
507
534
668
3,500
3,500
5,000
7,830
11,390
15,110
7,420
10,800
14,850
507
534
668
3,500
3,500
5,000
2,890
3,400
3,930
4,140
6,020
8,280
352
371
463
4,200
4,200
5,000
3,910
4,790
5,340
4,730
6,890
9,470
433
456
570
4,200
4,200
6,000
5,090
6,560
7,850
5,430
7,900
10,860
505
532
665
4,200
4,200
6,000
6,600
8,810
11,060
6,310
9,180
12,620
563
593
741
4,200
4,200
6,000
7,910
11,510
15,420
7,510
10,920
15,020
563
593
741
4,200
4,200
6,000
7,800
11,340
14,980
7,390
10,750
14,780
663
698
873
5,100
5,100
7,500
2,530
3,050
3,430
3,930
5,710
7,860
435
458
573
5,100
5,100
6,000
3,450
4,100
4,700
4,460
6,490
8,930
515
542
678
5,100
5,100
7,000
4,400
5,520
6,380
5,020
7,300
10,040
548
577
721
5,100
5,100
7,500
5,350
6,950
8,400
5,580
8,120
11,160
643
677
846
5,100
5,100
7,500
6,440
8,570
10,710
6,220
9,040
12,430
643
677
846
5,100
5,100
7,500
7,060
9,650
12,260
6,640
9,660
13,280
735
773
967
5,100
5,100
7,500
2,020
2,370
2,470
3,520
5,120
7,040
487
512
640
6,200
6,200
8,000
2,570
3,090
3,480
3,950
5,750
7,900
563
592
740
6,200
6,200
9,000
3,250
3,810
4,430
4,350
6,330
8,700
633
666
832
6,200
6,200
9,000
3,880
4,750
5,310
4,720
6,870
9,440
694
731
913
6,200
6,200
9,000
5,130
6,620
7,930
5,450
7,930
10,900
823
866
1,083
6,200
6,200
9,000
5,990
7,890
9,750
5,950
8,650
11,900
823
866
1,083
6,200
6,200
9,000
† TENSION STRENGTHS CALCULATED ON C-75/L-80 = 95,000 ULTIMATE; N-80 = 100,000 ULTIMATE; P-110 = 125,000 ULTIMATE.
5-19
TADLOCK PIPE
DIMENSIONAL DATA
HYDRIL CASING
“SUPER FJ” & “SUPER FJ-P”
API
CONNECTION
SIZE
WEIGHT
DRIFT
PIN
O.D.
T&C
I.D.
DIAMETER
LENGTH
O.D.
I.D.
(IN.)
LBS/FT.
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
2-3/8
4.6*
1.995
1.901
2.094
2-7/16
1.945
2-7/8
6.4*
2.441
2.347
2.125
2-31/32
2.375
8.7*
2.259
2.165
2.188
2.965
---
9.2*
2.992
2.867
2.625
3-19/32
2.930
10.2*
2.922
2.797
2.656
3-19/32
2.860
12.8*
2.764
2.639
2.688
3-19/32
2.700
12.95*
2.750
2.625
2.688
3-19/32
2.685
15.5*
2.602
2.477
2.750
3-19/32
2.540
11*
3.476
3.351
2.625
4-3/32
3.395
11.6*
3.428
3.303
2.625
4-3/32
3.350
13.4*
3.340
3.215
2.688
4-3/32
3.260
12.6*
3.958
3.833
2.750
4-19/32
3.880
13.5*
3.920
3.795
2.750
4-19/32
3.840
15.1
3.826
3.701
2.750
4-19/32
3.746
18.8
3.640
3.515
2.750
4-19/32
3.560
21.6
3.500
3.375
2.780
4.700
3.500
15*
4.408
4.283
3.000
5-3/32
4.328
18
4.276
4.151
3.000
5-3/32
4.196
20.3
4.184
4.059
3.000
5-3/32
4.104
20.8
4.156
4.031
3.000
5-3/32
4.076
23.2
4.044
3.919
3.000
5.150
3.964
24.1
4.000
3.875
3.000
5.150
3.920
17*
4.892
4.767
3.375
5-5/8
4.812
20
4.778
4.653
3.375
5-5/8
4.698
23
4.670
4.545
3.438
5-5/8
4.590
26
4.548
4.423
3.438
5-5/8
4.468
28.4
4.440
4.315
3.438
5.790
4.360
32
4.276
4.151
3.062
5.681
4.276
36.4
4.090
3.965
3.062
5.681
4.090
24*
5.921
5.796
3.625
6-3/4
5.841
28
5.791
5.666
3.688
6-3/4
5.711
32
5.675
5.550
3.688
6-25/32
5.595
35
5.575
5.450
3.688
6.781
---
3-1/2
4
4-1/2
5
5-1/2
6-5/8
2-3/8 THROUGH 4-1/2 CSG. 8 THREADS PER INCH; 5 THROUGH 7-3/4 CSG. 6 THREADS PER INCH; 8-5/8 THROUGH
13-3/8 CSG 4 THREADS PER INCH.
* ONLY THESE WEIGHTS ARE SUPER FJ; ALL OTHER WEIGHTS ARE SUPER FJ-P
• NOT TO API DRIFT SPECIFICATION
INTERCHANGEABLE WITH HYDRIL FJ & FJ-P
“P”-FEATURED CONNECTIONS NOT INTERCHANGEABLE WITH NON-”P” FEATURED CONNECTIONS
} BRACKETED WEIGHTS ARE INTERCHANGEABLE
5-20
TADLOCK PIPE
PERFORMANCE PROPERTIES
HYDRIL CASING
“SUPER F-J” & “SUPER FJ-P”
COLLAPSE PRESSURE
BURST PRESSURE
JOINT TENSILE YIELD STRENGTH†
OPTIMUM MAKE-UP TORQUE
C-75
L/N-80
P-110
C-75
L/N-80
P-110
C-75
N-80
P-110
PSI
PSI
PSI
PSI
PSI
PSI
LBS
LBS
LBS
11,040
11,780
---
10,500
11,200
---
63
66
79
700
10,570
11,170
---
9,910
10,570
---
91
96
115
1,000
---
14,350
15,300
---
14,060
15,000
---
169
178
214
1,000
1,000
10,040
10,530
---
9,520
10,160
---
136
143
171
1,300
---
11,360
12,120
---
10,840
11,560
---
157
166
199
1,300
---
14,110
15,060
---
13,800
14,730
---
208
219
263
1,300
1,900
14,350
15,310
---
14,060
15,000
---
213
224
269
1,300
1,900
---
17,890
---
---
17,960
---
249
262
312
1,300
1,900
8,410
8,800
---
8,600
9,170
---
157
165
198
1,800
1,800
9,790
10,270
---
9,390
10,010
---
181
191
229
1,800
1,800
11,350
12,110
---
10,830
11,550
---
215
227
272
1,800
1,800
7,200
7,500
---
7,900
8,430
---
192
202
243
2,500
2,500
8,170
8,540
10,670
8,460
9,020
12,410
215
226
282
2,500
2,500
10,390
11,080
14,320
9,830
10,480
14,420
236
248
310
3,200
3,200
12,960
13,830
19,010
12,540
13,380
18,390
288
303
378
3,200
3,200
14,810
15,800
21,730
14,580
15,560
21,390
344
362
453
3,200
3,200
6,970
7,250
8,830
7,770
8,290
11,400
226
238
297
3,000
3,000
10,000
10,490
13,450
9,500
10,140
13,940
285
300
375
3,800
3,800
11,240
11,990
16,490
10,710
11,420
15,710
342
360
450
3,800
3,800
11,590
12,360
17,000
11,080
11,820
16,250
342
360
450
3,800
3,800
12,970
13,830
19,020
12,550
13,380
18,400
342
360
450
3,800
3,800
13,500
14,400
19,800
13,130
14,000
19,250
387
388
485
3,800
3,800
6,070
6,280
7,460
7,250
7,740
10,640
258
271
339
3,500
3,500
8,440
8,830
11,080
8,610
9,190
12,640
315
332
414
4,500
4,500
10,460
11,160
14,520
9,900
10,560
14,530
391
412
515
4,500
4,500
11,860
12,650
17,390
11,360
12,120
16,660
426
448
560
4,500
4,500
13,060
13,930
19,160
12,650
13,490
18,550
523
550
688
4,500
4,500
14,830
15,820
21,760
14,660
15,580
21,420
430
453
566
5,000
7,000
16,760
17,880
24,590
16,820
17,950
24,680
430
453
566
5,000
7,000
5,570
5,760
6,710
6,970
7,440
10,230
351
369
461
4,800
4,800
7,830
8,170
10,140
8,260
8,810
12,120
445
469
586
6,000
6,000
9,830
10,320
13,210
9,410
10,040
13,800
534
562
703
6,000
6,000
10,940
11,670
15,850
10,400
11,090
15,250
569
599
749
6,000
6,000
† JOINT TENSILE STRENGTHS CALCULATED ON: C-75 = 95,000 ULTIMATE, N-80 = 100,000 ULTIMATE & P-110 = 125,000 ULTIMATE
5-21
C-75 & L/N-80
P-110
(FT.-LBS)
---
TADLOCK PIPE
DIMENSIONAL DATA
HYDRIL CASING
“SUPER FJ” & “SUPER FJ-P”
API
SIZE
O.D.
(IN.)
7
7-5/8
7-3/4
8-5/8
9-5/8
9-7/8
10-3/4
11-3/4
13-3/8
WEIGHT
T&C
LBS/FT.
23*
26
29
32
35
38
41
46
49.5
26.4
29.7
33.7
39
45.3
52.8
46.1
32
36
40
44
49
52
36
40
43.5
47
53.5
58.4
62.8 )
45.5
51
55.5
60.7
65.7
47
54
60
65
61
68
72
I.D.
(IN.)
6.366
6.276
6.184
6.094
6.004
5.920
5.820
5.660
5.590
6.969
6.875
6.765
6.625
6.435
6.201
6.560
7.921
7.825
7.725
7.625
7.511
7.435
8.921
8.835
8.755
8.681
8.535
8.435
8.625
9.950
9.850
9.760
9.660
9.560
11.000
10.880
10.772
10.682
12.515
12.415
12.347
DRIFT
DIAMETER
(IN.)
6.241
6.151
6.059
5.969
5.879
5.795
5.695
5.535
5.415
6.844
6.750
6.640
6.500
6.310
6.076
6.500•
7.796
7.700
7.600
7.500
7.386
7.310
8.765
8.679
8.599
8.525
8.379
8.279
8.500•
9.794
9.694
9.604
9.504
9.404
10.844
10.724
10.616
10.526
12.359
12.259
12.191
PIN
LENGTH
(IN.)
3.063
3.625
3.688
3.688
3.750
3.750
3.750
3.805
3.805
3.625
3.625
3.688
3.750
3.750
3.820
3.750
3.656
3.656
3.750
3.750
3.750
4.625
3.656
3.688
3.688
3.688
4.125
4.125
4.032
3.688
3.688
3.750
4.188
4.188
4.188
4.156
4.156
4.156
4.188
4.250
4.250
CONNECTION
O.D.
(IN.)
7-1/8
7-1/8
7-1/8
7-5/32
7-3/16
7-3/16
7.246
7.278
7.175
7-3/4
7-3/4
7-3/4
7-13/16
7-13/16
7.725
7-15/16
8-3/4
8-3/4
8-3/4
8-3/4
8-3/4
8-13/16
9-3/4
9-3/4
9-3/4
9-3/4
9-3/4
9-27/32
10
10-7/8
10-7/8
10-7/8
10-29/32
11
11-15/16
11-15/16
11-15/16
12
13-9/16
13-9/16
13-9/16
2-3/8 - 4-1/2 CSG. 8 THREADS PER INCH;
5 - 7-3/4 CSG. 6 THREADS PER INCH;
8-5/8 - 13-3/8 CSG. 4 THREADS PER INCH.
*ONLY THESE WEIGHTS ARE FJ; ALL OTHER WEIGHTS ARE FJ-P
•NOT TO API DRIFT SPECIFICATION
INTERCHANGEABLE WITH HYDRIL FJ*FJ-P
“P”-FEATURED CONNECTIONS NOT INTERCHANGEABLE WITH NON-“P” FEATURED CONENECTIONS
} BRACKETED WEIGHTS ARE INTERCHANGEABLE.
5-22
I.D.
(IN.)
6.286
6.196
6.104
6.014
5.924
5.840
5.740
5.660
5.590
6.889
6.795
6.685
6.545
6.355
6.121
--7.811
7.745
7.645
7.545
7.431
7.355
8.781
8.755
8.675
8.601
8.455
8.355
8.535
9.870
9.770
9.680
9.580
9.480
10.890
10.800
10.692
10.600
12.435
12.305
12.235
TADLOCK PIPE
PERFORMANCE PROPERTIES
HYDRIL “SUPER EU” CASING
COLLAPSE PRESSURE
C-75
PSI
3,770
5,250
6,760
8,230
9,710
10,680
11,580
12,980
14,010
3,280
4,670
6,320
8,430
10,790
12,700
10,630
2,950
4,020
5,350
6,680
8,200
9,210
2,320
2,980
3,750
4,630
6,380
7,570
--2,410
3,100
3,950
5,020
6,080
1,620
2,380
3,070
3,810
1,660
2,220
2,590
L/N-80
PSI
3,830
5,410
7,020
8,600
10,180
11,390
12,350
13,850
14,950
3,400
4,790
6,560
8,810
11,510
13,550
11,340
3,050
4,100
5,520
6,950
8,570
9,650
2,370
3,090
3,810
4,750
6,620
7,890
--2,480
3,220
4,020
5,160
6,300
1,630
2,450
3,180
3,870
1,670
2,260
2,670
P-110
PSI
4,450
6,210
8,510
10,760
13,010
15,110
16,980
19,040
20,550
3,930
5,340
7,850
11,060
15,420
18,640
14,980
3,430
4,700
6,380
8,400
10,710
12,260
2,470
3,480
4,430
5,310
7,930
9,750
10,260
2,610
3,670
4,630
5,860
7,490
1,630
2,570
3,610
4,490
1,670
2,330
2,890
BURST PRESSURE
C-75
PSI
5,940
6,790
7,650
8,490
9,340
10,130
11,060
12,560
13,690
5,650
6,450
7,400
8,610
10,240
12,260
10,080
5,360
6,090
6,850
7,610
8,480
9,050
4,800
5,390
5,930
6,440
7,430
8,110
--4,880
5,490
6,040
6,650
7,260
4,190
4,860
5,460
5,960
4,220
4,710
5,040
L/N-80
PSI
6,340
7,240
8,160
9,060
9,960
10,800
11,800
13,400
14,600
6,020
6,890
7,900
9,180
10,920
13,070
10,750
5,710
6,490
7,300
8,120
9,040
9,660
5,120
5,750
6,330
6,870
7,930
8,650
--5,210
5,860
6,450
7,100
7,750
4,470
5,180
5,830
6,360
4,500
5,020
5,380
JOINT TENSILE YIELD STRENGTH†
P-110
PSI
8,720
9,950
11,220
12,460
13,700
14,850
16,230
18,430
20,080
8,280
9,470
10,860
12,620
15,020
17,980
14,780
7,860
8,930
10,040
11,160
12,430
13,280
7,040
7,900
8,700
9,440
10,900
11,900
12,180
7,160
8,060
8,860
9,760
10,650
6,140
7,130
8,010
8,750
6,190
6,910
7,400
C-75
LBS
350
408
476
542
550
624
624
774
808
380
466
543
599
742
856
663
469
550
645
719
846
884
525
604
677
746
870
997
751
686
791
881
927
1070
670
832
1007
1106
908
1094
1219
N-80
LBS
368
430
501
571
579
657
657
815
850
400
490
572
631
781
901
698
493
579
679
757
890
930
553
636
713
785
916
1049
791
722
832
927
976
1127
706
876
1060
1164
956
1151
1284
P-110
LBS
460
538
626
714
723
822
822
1018
1063
500
613
714
789
977
1127
873
617
724
849
947
1113
1163
691
795
891
982
1145
1312
988
903
1040
1159
1220
1408
882
1095
1324
1455
1195
1439
1605
†JOINT TENSILE STRENGTHS CALCULATED ON: C-75 = 95,000 ULTIMATE, N-80 = 100,000 ULTIMATE, & P-110 = 125,000 ULTIMATE
5-23
OPTIMUM MAKE-UP TORQUE
C-75 & L/N-80
(FT.-LBS)
4,500
5,000
5,500
6,500
6,500
6,500
6,500
7,500
7,500
5,000
6,000
6,000
7,000
7,000
--8,000
6,000
7,000
8,000
8,000
8,000
8,000
8,000
9,000
9,000
10,000
10,000
10,000
10,000
9,000
9,000
12,000
13,000
13,000
10,000
13,000
13,000
13,000
13,000
15,000
15,000
P-110
4,500
5,000
5,500
6,500
6,500
6,500
6,500
10,000
10,000
5,000
6,000
6,000
7,000
7,000
12,000
8,000
6,000
7,000
8,000
8,000
8,000
8,000
8,000
9,000
9,000
10,000
10,000
10,000
10,000
9,000
9,000
12,000
13,000
13,000
10,000
13,000
13,000
13,000
13,000
15,000
15,000
TADLOCK PIPE
DIMENSIONAL DATA
HYDRIL CASING
“TRIPLESEAL”
API
SIZE
O.D.
(IN.)
CONNECTION
WEIGHT
DRIFT
PIN
T&C
I.D.
DIAMETER
LENGTH
O.D.
I.D.
LBS/FT.
(IN.)
(IN.)
(IN.)
(IN.)
(IN.)
11.6
4.000
3.875
3.250
4.719
3.920
12.6
3.958
3.833
3.250
4.719
3.878
13.5
3.920
3.795
3.250
4.719
3.840
4-1/2
15.1
3.826
3.701
3.250
4.750
3.746
18.8
3.640
3.515
3.250
4.750
3.560
13
4.494
4.369
3.250
5.219
4.414
15
4.408
4.283
3.250
5.219
4.328
5
18
4.276
4.151
3.250
5.250
4.196
20.3
4.184
4.059
3.250
5.250
4.104
23.2
4.044
3.919
3.250
5.250
3.965
14
5.012
4.887
3.250
5.750
4.932
15.5
4.950
4.825
3.250
5.750
4.870
5-1/2
17
4.892
4.767
3.250
5.781
4.812
20
4.778
4.653
3.250
5.781
4.698
23
4.670
4.545
3.250
5.781
4.590
26
4.548
4.423
3.250
5.781
4.468
20
6.049
5.924
3.813
6.938
5.970
6-5/8
24
5.921
5.796
3.813
6.938
5.840
28
5.791
5.666
3.813
6.969
5.710
32
5.675
5.550
3.813
6.969
5.595
20
6.456
6.331
3.813
7.313
6.376
23
6.366
6.241
3.813
7.313
6.286
26
6.276
6.151
3.813
7.313
6.196
7
29
6.184
6.059
3.813
7.313
6.104
32
6.094
5.969
3.813
7.344
6.014
35
6.004
5.879
3.813
7.344
5.924
38
5.920
5.795
3.813
7.344
5.840
41
5.820
5.695
4.813
7.360
5.740
26.4
6.969
6.844
3.813
7.938
6.889
29.7
6.875
6.750
3.813
7.938
6.795
7-5/8
33.7
6.765
6.640
3.813
8.000
6.685
39
6.625
6.500
3.813
8.016
6.545
45.3
6.435
6.310
3.813
8.000
6.355
4-1/2 THROUGH 7-3/4 = 6 THREADS PER INCH EXCEPT 7” 41#; 7” 41# & 8-5/8 THROUGH 11-3/4 65# 11-7/8 71.8#
= 4 THREADS PER INCH; 11-3/4 - 71# THROUGH 11-3/4 - 83# & 13-3/8 THROUGH 14 = 3 THREADS PER INCH.
• NOT TO API DRIFT SPECIFICATION
} INTERCHANGEABLE WHERE BRACKETED
* THESE WEIGHTS ARE PLAIN END WEIGHTS
5-24
TADLOCK PIPE
PERFORMANCE PROPERTIES
HYDRIL CASING
“TRIPLESEAL”
COLLAPSE PRESSURE
C-75
PSI
6,130
7,200
8,170
10,390
12,960
4,990
6,970
10,000
11,240
12,970
3,560
4,860
6,070
8,440
10,460
11,860
3,360
5,570
7,830
9,830
2,660
3,770
5,250
6,760
8,230
9,710
10,680
11,580
3,280
4,670
6,320
8,430
10,790
L/N-80
PSI
6,350
7,500
8,540
11,080
13,830
5,140
7,250
10,490
11,990
13,830
3,620
4,990
6,280
8,830
11,160
12,650
3,480
5,760
8,170
10,320
2,740
3,830
5,410
7,020
8,600
10,180
11,390
12,350
3,400
4,790
6,560
8,810
11,510
P-110
PSI
7,560
--10,670
14,320
19,010
5,830
8,830
13,450
16,490
19,020
4,240
5,620
7,460
11,080
14,520
17,390
--6,710
10,140
13,210
2,980
4,450
6,210
8,510
10,760
13,010
15,110
16,980
3,930
5,340
7,850
11,060
15,420
BURST PRESSURE
C-75
PSI
7,290
7,900
8,460
9,830
12,540
6,640
7,770
9,500
10,710
12,550
5,820
6,560
7,250
8,610
9,900
11,360
5,710
6,970
8,260
9,410
5,100
5,940
6,790
7,650
8,490
9,340
10,130
11,060
5,650
6,450
7,400
8,610
10,240
L/N-80
PSI
7,780
8,440
9,020
10,480
13,380
7,080
8,290
10,140
11,420
13,380
6,210
7,000
7,740
9,190
10,560
12,120
6,090
7,440
8,810
10,040
5,440
6,340
7,240
8,160
9,060
9,960
10,800
11,800
6,020
6,890
7,900
9,180
10,920
JOINT TENSILE YIELD STRENGTH†
P-110
PSI
10,690
--12,410
14,420
18,390
9,740
11,400
13,940
15,710
18,400
8,540
9,630
10,640
12,640
14,530
16,660
--10,230
12,120
13,800
7,480
8,720
9,950
11,220
12,460
13,700
14,850
16,230
8,280
9,470
10,860
12,620
15,020
C-75
LBS
208
233
255
308
308
237
294
353
353
353
249
294
337
416
416
416
368
483
593
593
360
446
531
610
640
640
640
789
511
608
682
738
738
L/N-80
LBS
219
245
268
324
324
249
309
372
372
372
262
310
355
438
438
438
388
508
624
624
378
469
558
642
673
673
673
831
538
640
718
777
777
P-110
LBS
273
306
335
405
405
311
387
465
465
465
327
387
444
548
548
548
484
635
780
780
473
586
698
802
842
842
842
1039
672
800
897
971
971
OPTIMUM MAKE-UP TORQUE
C-75 & L/N-80
(FT.-LBS)
3,200
3,200
3,200
3,200
3,200
3,800
3,800
3,800
3,800
3,800
4,500
4,500
4,500
4,500
4,500
4,500
6,000
6,000
6,000
6,000
6,500
6,500
6,500
6,500
6,500
6,500
6,500
12,000
7,500
7,500
7,500
7,500
7,500
† JOINT TENSILE STRENGTHS CALCULATED ON: C-75/L-80 = 95,000 ULTIMATE, N-80 = 100,000 ULTIMATE, & P-110 = 125,000 ULTIMATE
5-25
P-110
4,200
4,200
4,200
4,200
4,200
5,000
5,000
5,000
5,000
5,000
6,000
6,000
6,000
6,000
6,000
6,000
7,500
7,500
7,500
7,500
8,500
8,500
8,500
8,500
8,500
8,500
8,500
14,000
10,000
10,000
10,000
10,000
10,000
TADLOCK PIPE
DIMENSIONAL DATA
HYDRIL CASING
“TRIPLESEAL”
API
SIZE
O.D.
(IN.)
7-3/4
8-5/8
9-5/8
10-3/4
11-3/4
11-7/8
13-3/8
14
WEIGHT
T&C
LBS/FT.
46.1
32
36
40
44
49
36
40
43.5
47
53.5
40.5
45.5
51
55.5
60.7
65.7
47
54
60
65
71
75
79
83
71.8
68
72
77
85
92
98
92.68*
99.43*
106.13*
112.78*
119.38*
I.D.
(IN.)
6.560
7.921
7.825
7.725
7.625
7.511
8.921
8.835
8.755
8.681
8.535
10.050
9.950
9.850
9.760
9.660
9.560
11.000
10.880
10.772
10.682
10.586
10.514
10.438
10.368
10.711
12.415
12.347
12.275
12.159
12.031
11.937
12.700
12.600
12.500
12.400
12.300
DRIFT
DIAMETER
(IN.)
6.500•
7.796
7.700
7.600
7.500
7.386
8.765
8.679
8.599
8.525
8.379
9.894
9.794
9.694
9.604
9.504
9.404
10.844
10.724
10.616
10.526
10.430
10.358
10.282
10.212
10.625•
12.259
12.191
12.119
12.003
11.875
11.781
12.544
12.444
12.344
12.244
12.144
PIN
LENGTH
(IN.)
3.813
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
4.250
5.500
5.500
5.500
5.500
4.250
5.500
5.500
5.500
5.500
5.500
5.500
6.500
6.500
6.500
6.500
6.500
CONNECTION
O.D.
(IN.)
8.125
8.938
8.938
8.938
9.031
9.031
10.000
10.000
10.000
10.000
10.063
11.188
11.188
11.188
11.188
11.250
11.313
12.188
12.188
12.188
12.188
12.250
12.250
12.250
12.250
12.320
13.813
13.813
13.813
13.813
14.000
14.000
14.500
14.500
14.625
14.625
14.625
I.D.
(IN.)
--7.811
7.745
7.645
7.545
7.431
8.781
8.755
8.675
8.601
8.455
9.910
9.870
9.770
9.680
9.580
9.480
10,860
10.800
10.692
10.650
10.474
10.402
10.326
10.256
10.672
12.305
12.235
12.165
12.049
11.921
11.827
12.590
12.490
12.390
12.290
12.190
4-1/2 THROUGH 7-3/4 = 6 THREADS PER INCH EXCEPT 7” 41#; 7” 41# & 8-5/8 THROUGH 11-3/4 65# 11-7/8
71.8# = 4 THREADS PER INCH; 11-3/4 71# THROUGH 11-3/4-83# & 13-3/8 THROUGH 14 = 3 THREADS PER INCH.
7-3/4 INTERCHANGEABLE WITH 7-5/8 WEIGHTS
• NOT TO API DRIFT SPECIFICATION
} INTERCHANGEABLE WHERE BRACKETED
* THESE WEIGHTS ARE PLAIN END WEIGHTS
5-26
TADLOCK PIPE
PERFORMANCE PROPERTIES
HYDRIL “SUPER EU” CASING
COLLAPSE PRESSURE
C-75
PSI
10,630
2,950
4,020
5,350
6,680
8,200
2,320
2,980
3,750
4,630
6,380
1,720
2,410
3,100
3,950
5,020
6,080
1,620
2,380
3,070
3,810
4,750
5,450
6,190
6,880
--2,220
2,590
2,990
3,810
4,910
5,720
4,040
4,860
5,670
6,490
7,310
L/N-80
PSI
11,340
3,050
4,100
5,520
6,950
8,570
2,370
3,090
3,810
4,750
6,620
1,730
2,480
3,220
4,020
5,160
6,300
1,630
2,450
3,180
3,870
4,870
5,630
6,420
7,150
--2,260
2,670
3,100
3,870
5,050
5,910
4,110
4,990
5,870
6,740
7,620
P-110
PSI
14,980
3,430
4,700
6,380
8,400
10,710
2,470
3,480
4,430
5,310
7,930
1,730
2,610
3,670
4,630
5,860
7,490
1,630
2,570
3,610
4,490
5,450
6,520
7,650
8,700
5,300
2,330
2,890
3,500
4,490
5,700
6,930
4,710
5,620
6,860
8,110
9,360
BURST PRESSURE
C-75
PSI
10,080
5,360
6,090
6,850
7,610
8,480
4,800
5,390
5,930
6,440
7,430
4,270
4,680
5,490
6,040
6,650
7,260
4,190
4,860
5,460
5,960
6,500
6,900
7,330
7,720
--4,710
5,040
5,400
5,970
6,590
7,060
6,090
6,560
7,000
7,500
7,970
L/N-80
PSI
10,750
5,710
6,490
7,300
8,120
9,040
5,120
5,750
6,330
6,870
7,930
4,560
5,210
5,860
6,450
7,100
7,750
4,470
5,180
5,830
6,360
6,930
7,360
7,820
8,230
--5,020
5,380
5,760
6,360
7,030
7,530
6,500
7,000
7,500
8,000
8,500
JOINT TENSILE YIELD STRENGTH†
P-110
PSI
14,780
7,860
8,930
10,040
11,160
12,430
7,040
7,900
8,700
9,440
10,900
6,270
7,160
8,060
8,860
9,760
10,650
6,140
7,130
8,010
8,750
9,530
10,120
10,750
11,320
9,430
6,910
7,400
7,920
8,750
9,670
10,350
8,940
9,630
10,310
11,000
11,690
C-75
LBS
869
576
689
797
880
880
646
760
865
962
1076
720
869
1017
1148
1279
1410
872
1068
1242
1368
1210
1307
1412
1506
1372
1273
1398
1531
1741
1973
2128
1957
2146
2334
2519
2704
L/N-80
LBS
915
606
725
839
926
926
680
800
911
1012
1132
758
915
1070
1209
1346
1484
918
1124
1308
1440
1274
1376
1486
1585
1444
1340
1472
1611
1832
2077
2240
2061
2259
2456
2652
2846
P-110
LBS
1143
758
906
1048
1157
1157
850
1000
1139
1265
1415
947
1143
1338
1511
1683
1855
1147
1405
1635
1800
1592
1720
1858
1982
1805
1675
1840
2014
2290
2596
2800
2576
2824
3070
3315
3557
OPTIMUM MAKE-UP TORQUE
C-75 & L/N-80
(FT.-LBS)
7,500
9,000
9,000
9,000
9,000
9,000
11,000
11,000
11,000
11,000
11,000
13,000
13,000
13,000
13,000
13,000
13,000
15,000
15,000
15,000
15,000
15,000
18,000
18,000
18,000
15,000
20,000
20,000
20,000
20,000
20,000
20,000
44,000
44,000
44,000
44,000
44,000
† JOINT TENSILE STRENGTHS CALCULATED ON: C-75/L-80 = 95,000 ULTIMATE, N-80 = 100,000 ULTIMATE & P-110 = 125,000 ULTIMATE
5-27
P-110
10,000
12,000
12,000
12,000
12,000
12,000
15,000
15,000
15,000
15,000
15,000
18,000
18,000
18,000
18,000
18,000
18,000
21,000
21,000
21,000
21,000
21,000
24,000
24,000
24,000
21,000
27,000
27,000
27,000
27,000
27,000
27,000
60,000
60,000
60,000
60,000
60,000
TADLOCK PIPE
DIMENSIONAL DATA
NL ATLAS BRADFORD
FLUSHLINE QUADRASEAL
FL-4S CASING
API
SIZE
O.D.
(IN.)
5
5-1/2
6-5/8
7
7-5/8
8-5/8
CONNECTION
WEIGHT
T&C
LBS/FT.
11.50
13.00
15.00
18.00
20.80
23.60
24.20
14.00
15.50
17.00
20.00
23.00
26.00
28.40
20.00
25.20
24.00
28.00
32.00
17.00
20.00
23.00
26.00
29.00
32.00
35.00
38.00
41.00
24.00
26.40
29.70
33.70
39.00
45.30
24.00
28.00
29.35
32.00
36.00
40.00
44.00
49.00
1-1/8 TAPER PER FOOT
6 THREADS PER INCH
5-28
I.D.
(IN.)
4.560
4.494
4.408
4.276
4.156
4.044
4.000
5.012
4.950
4.892
4.778
4.670
4.548
4.440
6.049
5.965
5.921
5.791
5.675
6.538
6.456
6.366
6.276
6.184
6.094
6.004
5.920
5.820
7.025
6.969
6.875
6.765
6.625
6.435
8.097
8.017
7.981
7.921
7.825
7.725
7.625
7.511
DRIFT
DIAMETER
(IN.)
4.435
4.369
4.283
4.151
4.031
3.919
3.875
4.887
4.825
4.767
4.653
4.545
4.423
4.315
5.924
5.840
5.796
5.666
5.550
6.413
6.331
6.241
6.151
6.059
5.969
5.879
5.795
5.695
6.900
6.844
6.750
6.640
6.500
6.310
7.972
7.892
7.856
7.796
7.700
7.600
7.500
7.386
PIN
LENGTH
(IN.)
1.682
2.086
2.171
3.845
4.108
4.592
4.719
1.790
2.128
2.181
3.856
4.197
4.602
4.805
2.151
2.246
2.288
4.208
4.570
1.731
2.128
2.213
3.844
4.091
4.433
4.721
4.986
5.301
2.181
2.235
3.931
4.294
4.742
5.325
2.105
2.192
2.224
2.298
4.101
4.411
4.742
5.093
O.D.
(IN.)
5.000
5.500
6.625
7.000
7.625
8.625
I.D.
(IN.)
4.460
4.419
4.333
4.201
4.081
3.969
3.925
4.912
4.875
4.817
4.703
4.595
4.473
4.365
5.974
5.895
5.846
5.716
5.600
6.438
6.381
6.291
6.201
6.109
6.019
5.929
5.845
5.745
6.950
6.894
6.800
6.690
6.550
6.360
8.022
7.942
7.906
7.846
7.750
7.650
7.550
7.436
TADLOCK PIPE
PERFORMANCE PROPERTIES
NL ATLAS BRADFORD
FLUSHLINE QUADRASEAL
FL-4S CASING
COLLAPSE PRESSURE
BURST PRESSURE
K/J-55
E/N-80
P-105
J-55
N-80
P-105
PSI
3,060
4,140
5,550
7,340
------3,120
4,040
4,910
6,610
7,670
----2,970
4,010
4,560
6,170
----2,270
3,270
4,320
------------2,890
--------1,370
1,880
--2,530
3,450
-------
PSI
----7,250
10,490
--13,830
------6,280
8,830
11,160
12,650
------5,760
8,170
10,320
----3,830
5,410
7,020
8,600
10,180
11,390
----3,400
4,790
6,560
8,810
----------4,100
5,520
6,950
8,570
PSI
----8,830
13,450
--19,020
------7,460
11,080
14,520
17,390
------6,710
10,140
13,210
------6,210
8,510
10,760
13,010
15,110
------5,340
7,850
11,060
------------6,380
8,400
10,710
PSI
4,240
4,870
5,700
6,970
------4,270
4,810
5,320
6,320
7,260
----4,180
4,790
5,110
6,060
----3,740
4,360
4,980
------------4,140
--------2,950
3,390
--3,930
4,460
-------
PSI
----8,290
10,140
--13,380
------7,740
9,190
10,560
12,120
------7,440
8,810
10,040
----6,340
7,240
8,160
9,060
9,960
10,800
----6,020
6,890
7,900
9,180
----------6,490
7,300
8,120
9,040
PSI
----11,400
13,940
--18,400
------10,640
12,640
14,520
16,660
------10,230
12,120
13,800
------9,960
11,220
12,460
13,700
14,850
------9,470
10,860
12,620
------------10,040
11,160
12,430
JOINT
TENSILE YIELD STRENGTH†
J-55
N-80
P-105
1000
1000
1000
LBS
LBS
LBS
141
----197
----228
241
301
326
343
429
--------441
552
------172
----236
----259
273
341
360
379
474
409
431
539
--488
610
------300
----341
----362
382
477
502
529
661
--597
746
------300
----348
366
--466
491
613
--549
687
--606
757
--661
827
--712
890
------------393
414
----555
694
--632
790
--727
909
------362
----415
----------478
----638
672
----751
939
--830
1,037
--918
1,147
OPTIMUM MAKE-UP
TORQUE**
J&K
(FT.-LBS)
3,000
3,000
3,500
3,500
--4,000
--3,800
3,800
3,800
4,200
4,200
4,500
--4,500
4,700
4,700
5,000
----4,000
4,000
5,000
------------5,000
--------5,000
5,000
--5,500
5,500
-------
CN&P
(FT.-LBS)
----4,000
4,000
--4,500
------4,500
5,000
5,000
5,300
------6,000
6,300
6,500
----5,500
7,000
7,000
7,500
7,500
7,500
----6,500
7,500
7,500
7,500
----------7,000
8,000
8,500
8,500
EACH SIZE AND WALL DESIGNED INDIVIDUALLY FOR MAXIMUM PERFORMANCE NOT INTERCHANGEABLE.
† JOINT TENSION STRENGTH CALCULATED ON MINIMUM ULTIMATE TENSILE: J-55 = 75,00; K-55, C-75 AND L-80 = 95,000; N-80 AND E = 100,000; C-95 = 105,000;
P-105 = 120,000; P-110 = 125,000 PSI.
**OPTIMUM MAKE-UP TORQUE MAY VARY WITH FIELD CONDITIONS. API MODIFIED THREAD COMPOUND IS RECOMMENDED.
5-29
TADLOCK PIPE
DIMENSIONAL DATA
NL ATLAS BRADFORD
IJ-4S QUADRASEAL CASING
API
SIZE
O.D.
(IN.)
5
5-1/2
6-5/8
7
7-5/8
7-3/4
8-5/8
9-5/8
WEIGHT
T&C
LBS/FT.
13.00
15.00
18.00
20.80
23.20
24.20
14.00
15.50
17.00
20.00
23.00
26.00
28.40
20.00
23.20
24.00
28.00
32.00
20.00
23.00
26.00
29.00
32.00
35.00
38.00
41.00
44.00
24.00
26.40
29.70
33.70
39.00
45.30
46.10
28.00
29.35
32.00
36.00
40.00
44.00
49.00
32.30
35.00
40.00
43.50
47.00
53.50
61.10
71.80
3/4 TAPER PER FOOT
6 THREADS PER INCH
5-30
I.D.
(IN.)
4.494
4.408
4.276
4.156
4.044
4.000
5.012
4.950
4.892
4.778
4.670
4.548
4.440
6.049
5.965
5.921
5.791
5.675
6.456
6.366
6.276
6.184
6.094
8.004
5.920
5.820
5.720
7.025
6.969
6.875
6.765
6.625
6.435
6.560
8.017
7.981
7.921
7.825
7.725
7.625
7.511
9.001
8.921
8.835
8.755
8.681
8.535
8.375
8.125
DRIFT
DIAMETER
(IN.)
4.369
4.283
4.151
4.031
3.919
3.875
4.887
4.825
4.767
4.653
4.545
4.423
4.315
5.924
5.845
5.796
5.666
5.550
6.331
6.241
6.151
6.059
5.969
5.879
5.795
5.695
5.625
6.900
6.844
6.750
6.640
6.500
6.310
6.435
7.892
7.856
7.796
7.700
7.600
7.500
7.386
8.845
8.765
8.679
8.599
8.525
8.379
8.219
7.969
CONNECTION
PIN
LENGTH
(IN.)
4.375
4.375
4.375
4.375
4.375
4.375
--4.375
4.375
4.375
4.375
4.375
4.375
4.438
4.438
4.438
4.438
4.438
4.625
4.625
4.625
4.625
4.625
4.625
4.625
4.625
--4.813
4.813
4.813
4.813
4.813
4.813
--4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
4.938
-----
O.D.
(IN.)
5.390
5.465
5.565
5.565
5.765
5.765
--6.015
6.015
6.165
6.165
6.340
6.340
7.115
7.215
7.215
7.315
7.415
7.465
7.615
7.615
7.815
7.815
7.815
7.955
7.955
--8.140
8.140
8.315
8.315
8.465
8.565
--9.140
9.140
9.265
9.265
9.515
9.515
9.515
10.265
10.265
10.265
10.515
10.515
10.515
-----
TADLOCK PIPE
PERFORMANCE PROPERTIES
NL ATLAS BRADFORD
IJ-4S QUADRASEAL CASING
COLLAPSE PRESSURE
J-55
PSI
4140
5550
7390
8240
9510
11990
2130
4040
4910
6610
7670
8700
--2970
4010
4560
6170
7320
2270
3270
4320
5400
6460
7270
7830
8490
--2040
2890
3910
5090
--7910
--1370
--2530
3450
4400
5350
----2020
2570
3250
3880
-------
C/N-80
PSI
5140
7250
10490
11990
13830
17430
--4990
6280
8830
11160
12650
13930
3480
--5760
8170
10320
--3830
5410
7020
8600
10180
11390
12350
----3400
4790
6560
8810
11510
11340
----3050
4100
5520
6950
8570
--2370
3090
3810
4750
6620
8250
---
BURST PRESSURE
P-105
PSI
5820
8830
13450
16490
19020
23970
--5610
7460
11080
14520
17390
19160
4040
--6710
10140
13200
--4450
6210
8510
10760
13010
15110
16980
----3930
5340
7850
11060
15420
14980
----3430
4700
6380
8400
10710
--2470
3480
4430
5310
7930
10260
---
J-55
PSI
4870
5700
6970
7850
9200
11980
4270
4810
5320
6320
7260
8330
--4180
4790
5110
6060
6900
3740
4360
4980
5610
6230
6850
7420
8110
--2750
4140
4730
5430
--7510
--2950
--3930
4460
5020
5580
----3520
3950
4350
4720
-------
C/N-80
PSI
7080
8290
10140
11420
13380
17420
--7000
7740
9190
10560
12120
1349
6090
--7440
8810
10040
--6340
7240
8160
9060
9960
10800
11800
----6020
6890
7890
9180
10920
10750
----5710
6490
7300
8120
9040
--5120
5750
6330
6870
7930
8860
---
P-105
PSI
9740
11400
13940
15710
18400
23950
--9630
10640
12640
14530
16660
1855
8370
--10230
12120
13800
--8720
9960
11220
12480
13700
14850
16230
----8280
9470
10860
12620
15020
14780
----7860
8930
10040
11160
12430
--7040
7900
8700
9440
10900
12180
---
PIPE*
TENSILE YIELD STRENGTH*
J-55
C/N-80
P-105
1000#
1000#
1000#
194
----241
350
481
290
422
580
324
471
647
373
543
691
------------248
362
497
273
397
546
321
466
641
365
530
729
413
601
826
------300
----341
----382
555
763
447
651
895
504
734
1009
------366
532
732
415
604
830
465
676
929
512
745
1025
559
814
1119
603
877
1205
------------------414
602
827
469
633
940
535
778
1069
615
895
1231
723
1051
1444
------------------503
732
1006
568
827
1137
636
925
1271
702
1021
1404
776
1129
1553
------564
820
1128
630
916
1260
691
1005
1381
746
1086
1493
855
1244
1639
928
1311†
1639
-------
OPTIMUM MAKE-UP
TORQUE
C/N-80
P-105
(FT.-LBS)
3,000
4,000
5,000
3,000
4,000
5,000
4,000
5,000
6,200
5,000
6,000
7,200
6,000
7,000
8,500
6,000
7,000
8,500
------3,900
5,000
6,000
5,000
6,000
7,100
5,000
6,000
7,100
6,000
7,000
7,800
7,300
8,200
8,700
7,300
8,200
8,700
5,000
6,000
7,200
6,200
7,000
8,200
6,200
7,000
8,200
7,300
8,000
9,000
8,000
9,000
9,500
5,500
7,200
8,500
5,500
7,200
8,500
7,000
8,000
9,500
7,500
9,000
10,000
8,500
10,000
11,000
8,500
10,000
11,000
9,000
10,500
11,500
9,000
10,500
11,500
------6,800
8,000
9,000
6,800
8,000
9,000
7,300
8,500
9,500
8,800
10,000
11,000
9,800
11,000
12,000
10,200
12,000
13,000
------7,300
8,500
9,500
7,800
9,000
10,000
7,800
9,000
10,000
9,000
10,000
11,500
10,000
11,000
12,500
10,500
12,000
13,500
11,000
13,000
14,500
8,000
9,500
10,500
8,000
9,500
10,500
9,000
10,000
12,000
10,000
11,000
13,500
11,000
12,000
14,500
12,500
14,000
16,000
------------J-55
NOTE: THE MODIFIED-BUTTRESS RUN-OUT THREAD DESIGN PROVIDES A JOINT WITH TENSILE STRENGTH APPROACHING THAT OF THE BODY OF THE PIPE.
5-31
TADLOCK PIPE
DIMENSIONAL DATA
VALLOUREC VAM CASING
API
SIZE
O.D.
(IN.)
4-1/2
5
5-1/2
6-5/8
7
7-5/8
8-5/8
9-5/8
10-3/4
13-3/8
WEIGHT
T&C
(LBS/FT.)
10.50
11.60
13.50
15.10
16.90
18.80
21.60
24.60
13.00
15.00
18.00
21.40
24.20
15.50
17.00
20.00
23.00
26.80
20.00
24.00
28.00
32.00
23.00
26.00
29.00
32.00
35.00
38.00
41.00
44.00
26.40
29.70
33.70
35.80
39.00
42.80
28.00
32.00
36.00
40.00
44.00
49.00
56.00
36.00
40.00
43.50
47.00
53.50
59.40
40.50
45.50
51.00
55.50
60.70
65.70
54.50
61.00
68.00
72.00
I.D.
(IN.)
4.052
4.000
3.920
3.826
3.740
3.640
3.500
3.380
4.494
4.408
4.276
4.126
4.000
4.950
4.892
4.778
4.670
4.548
6.049
5.921
5.791
5.675
6.366
6.276
6.184
6.094
6.004
5.920
5.820
5.720
6.969
6.875
6.765
6.695
6.625
6.501
8.017
7.921
7.825
7.725
7.625
7.511
7.435
8.921
8.835
8.755
8.681
8.535
8.407
10.050
9.950
9.850
9.760
9.660
9.560
12.615
12.515
12.415
12.347
DRIFT
DIAMETER
(IN.)
3.927
3.875
3.795
3.701
3.615
3.515
3.375
3.255
4.369
4.283
4.151
4.001
3.875
4.825
4.767
4.653
4.545
4.423
5.924
5.796
5.666
5.550
6.241
6.151
6.059
5.969
5.879
5.795
6.695
5.595
6.844
6.750
6.640
6.570
6.500
6.376
7.892
7.796
7.700
7.600
7.500
7.386
7.310
8.765
8.679
8.599
8.525
8.379
8.251
9.894
9.794
9.694
9.604
9.504
9.404
12.459
12.359
12.259
12.191
3/4” TAPER PER FOOT
6 THREADS PER INCH FOR 4-1/2 CASING
5 THREADS PER INCH FOR 5 THROUGH 13-3/8 CASING
5-32
PIN
LENGTH
(IN.)
3.661
REG.
(IN.)
4.862
4.862
4.961
4.961
5.106
5.106
5.601
5.280
COUPLING
O.D.
SPEC.CL.
(IN.)
4.803
4.803
4.803
4.882
---------
LENGTH
(IN.)
7.635
4.299
5.563
5.391
9.094
4.378
6.050
5.891
9.252
4.591
7.390
7.016
9.646
4.772
7.656
7.391
10.039
4.984
8.504
8.141
10.433
5.102
9.625
8.141
10.669
5.102
10.625
10.141
10.669
5.118
11.748
11.266
10.669
5.071
14.375
---
10.669
TADLOCK PIPE
PERFORMANCE PROPERTIES
VALLOUREC VAM CASING
K-55
PSI
4010
4960
6420
7620
8500
9510
10860
11990
4140
5550
7390
8770
9900
4040
4910
6610
7670
8700
2970
4560
6170
7320
3270
4320
5400
6460
7270
7830
8490
9140
2890
3910
5090
5850
----1880
2530
3450
4400
5350
----2020
2570
3250
3880
----1580
2090
2700
3390
----1130
1540
1950
---
COLLAPSE PRESSURE
N/L-80
PSI
4930
6350
8540
11080
12370
13830
15800
17430
5140
7250
10490
12760
14400
4990
6280
8830
11160
12650
3480
5760
8170
10320
3830
5410
7020
8600
10180
11390
12350
13290
3400
4790
6560
7690
8810
10810
2160
3050
4100
5520
6950
8570
9650
2370
3090
3810
4750
6620
8250
1730
2480
3220
4020
5160
6300
1140
1670
2260
2670
P-110
PSI
5540
7560
10670
14320
17010
19010
21730
23970
5820
8830
13450
17550
19800
5610
7460
11080
14520
17390
4040
6710
10140
13200
4450
6210
8510
10760
13010
15110
16980
18280
3930
5340
7850
9460
11060
13910
2210
3430
4700
6380
8400
10710
12260
2470
3480
4430
5310
7930
10260
1730
2610
3670
4630
5860
7490
1140
1670
2330
2890
K-55
PSI
4790
5350
6200
7210
8130
9200
10690
11980
4870
5700
6970
8410
9630
4810
5320
6320
7260
8330
4180
5110
6060
6900
4360
4980
5610
6230
6850
7420
8110
8800
4140
4730
5430
5870
----3390
3930
4460
5020
5580
----3520
3950
4350
4720
----3130
3580
4030
4430
----2730
3090
3450
---
BURST PRESSURE
N/L-80
PSI
6970
7780
9020
10480
11820
13380
15560
17420
7080
8290
10140
12240
14000
7000
7740
9190
10560
12120
6090
7440
8810
10040
6340
7240
8160
9060
9960
10800
11800
12800
6020
6890
7890
8540
9180
10320
4930
5710
6490
7300
8120
9040
9660
5120
5750
6330
6870
7930
8860
4580
5210
5860
6450
7100
7750
3980
4500
5020
5380
*JOINT EFFICIENCY 100% OR MORE EXCEPT AS NOTED BELOW.
†JOINT STRENGTH IS SHOWN AND IS LESS THAN THE PIPE YIELD STRENGTH.
5-33
P-110
PSI
9580
10690
12410
14420
16260
18390
21390
23950
9740
11400
13940
16820
19250
9630
10640
12640
14530
16660
8370
10230
12120
13800
8720
9960
11220
12480
13700
14850
16230
17600
8280
9470
10860
11740
12620
14190
6780
7860
8930
10040
11160
12430
13280
7040
7900
8700
9440
10900
12180
6270
7160
8060
8860
9760
10650
5470
6190
6910
7400
K-55
1000#
166
184
211
241
271
302
346
381
208
241
290
345
389
248
273
321
365
413
315
382
447
505
366
415
465
512
559
603
653
703
414
470
535
757
----437
503
568
636
702
----564
630
691
746
----629
715
801
877
----853
962
1069
---
PIPE YIELD STRENGTH*
N/L-80
1000#
241
267
307
353
393
440
503
555
302
350
422
501
565
361
397
466
530
581†
459
555
651
734
532
604
676
745
814
877
879†
879†
602
683
778
837
895
998
636
732
827
925
1021
1129
1201
820
916
1005
1086
1244
1380
915
1040
1165
1276
1398
1519
1241
1399
1556
1661
P-110
1000#
331
367
422
485
541
605
691
762
415
481
580
672†
672†
497
546
641
726†
726†
631
763
895
1010
732
830
929
1025
1098†
1098†
1098†
1098†
827
940
1069
1151
1231
1402†
874
1006
1137
1271
1404
1553
1651
1128
1260
1381
1493
1710
1897
1251†
1423†
1594†
1745†
1912†
2077†
1659†
1870†
2079†
2221†
OPTIMUM MAKE
UP TORQUE
(FT.-LBS)
4300
4700
5800
6500
8000
------5100
6500
8000
8700
10800
5800
6500
8000
9000
--8000
8000
8700
9400
8000
8700
9400
9400
10100
10800
10800
12300
8000
8700
9400
9400
10100
10100
8000
8700
9400
10800
11600
12300
12300
8700
9400
10100
11600
13000
13700
8700
10100
11600
12300
13400
14100
10800
11600
12300
13000
TADLOCK PIPE
NOTES