内部公开▲
AIGS Antenna Configuration on EMS
This gurid book fit for where has AIGS antenna .
1.
2.
Find the site which has AIGS on EMS , right click the OMMB and start NE
Configuration
After finish start NE , right click the OMMB , open AIGS Device Management and
Configuration Management .
3.
Find the site in Configuration Management .
4.
After find the site , go Modify Area > Managed > Element > Device > RRU(which
include the AISG site ) > Power Outlet Set , double click .
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
第1页
内部公开▲
5.
Modify the Switch status to “AISG R8485[1]” and Voltage “220[1]”,then save.
6.
Then go Modify Area > Managed > Element > Device > BTS Auxiliary Peripheral
Device > Antenna Entity Object , build a new object.
7.
Input the information of AISG Antenna , then save
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
第2页
内部公开▲
8.
9.
Synchronize all data which modified.
Find site in AIGS Device Management.
10. Scan the AISG antenna . This step will spend some time , please wait until the result
appear.
Word in Detailed information is scan result , if this site has AISG antenna , result count
is 1 .
11. Click the detail information blew the window , then click the green plus button . change
the connected antenna entity ID to 1.
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
第3页
内部公开▲
12. Synchronize all data which modified.
13. Back to Configuration Management . go Modify Area > Managed > Element > Device >
BTS Auxiliary Peripheral Device > Antenna Attribute Object . change the Antenna gain ,
Antenna gap (mm) , number of antenna unit according to custom requirements .
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
第4页