Technical Data Sheet
®
ELU-2000 WHITE
Ultra
100% Acrylic UV Crosslinking
High-Performance Elastomeric Paint
PRODUCT DESCRIPTION
DAVIES ElastoGel Ultra is a premium quality 100% acrylic elastomeric water-based coating formulated
with the advanced UV CROSSLINKING TECHNOLOGY suited for tropical climates. This special feature
produces flexible yet tough and firm paint films. As a result, DAVIES ElastoGel Ultra possesses the highest
level of DIRT PICK-UP RESISTANCE to maintain its attractive eggshell appearance and outstanding ELASTICITY
to bridge continually moving hairline cracks and provide waterproofing protection.
®
®
®
®
FEATURES
APPLICATION DATA
• Exceptional Durability
• Superior Dirt pick-up Resistance
– UV Crosslinking Technology
• Excellent Peeling, Chalking and Color fading Resistance
• Long-term Elasticity and crack bridging property
• Protection against fungus and algae growth
• Outstanding Alkali & Efflorescence Resistance
Application Method
Number of coats
Thinning
Recoat Time
Drying Time
Pack Sizes
Shelf Life
RECOMMENDED USE
• New or previously painted exterior masonry surfaces
• Brickwork
• Plaster
• Cement
• Rendering
• Asbestos
Volume Solids
VOC
Dry Film Thickness
PAINTING SYSTEM
No. of
coats
Dry Film
Total
Recommended Thickness
DFT
Coverage*
(DFT)
microns
m2/4L
microns
Product
Primer/
Sealer
1
Topcoat
2-3 DV-ELU-2000 DAVIES
DV-EL-0020 DAVIES
ELASTOSEALER
®
®
ElastoGel Ultra
®
35
15
15
18-25
70-100
140-200
*This will vary according to the surface roughness and porosity and application method.
TECHNICAL DATA
Type
Finish
Color Range
: Brush / Roller / Spray
: 2-3 coats
: Dilute with not more than 5% of water
: 2-4 hours
: 24 hours
: 4 liters and 16 liters
: One year when stored in dry & cool conditions
: 100% Acrylic Crosslinking Polymer
: Low Sheen
: Available in Tint Bases Pastel,
Medium, Deep
: 45%
: 50 grams / liter
: 70 - 100 microns per coat
PERFORMANCE DATA
Elongation @ break : 100% minimum
Tensile Strength
: 1.50 Mpa minimum
Water Absorption
: less than 170 ml water / sq m / day
SURFACE PREPARATION
A. New Concrete:
• New concrete and cement plastered surfaces must be thoroughly cured
for 28 days before painting, having a moisture content of less than 15%
and a pH below 9.
• Remove concrete laitance and other impurities.
• Thoroughly clean the surface and ensure that it is dry, free from oil,
grease, loose materials and other possible contaminants.
B. Previously Painted Concrete:
• Thoroughly clean the surface and ensure that it is dry, free from oil
grease, loose materials and other possible contaminants.
• If the surface is powdery and chalky, scrub and clean with water before
applying one coat of DAVIES Liquid Tile Penetrating Sealer.
• For mildew and molds, treat with 1 part liquid bleach and 3 parts water
solution. Rinse with water and allow the surface to dry before painting.
®
®
STORAGE AND HANDLING
• Keep container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand.
SAFETY PRECAUTIONS
• For more information about this product, please request safety data sheet
from product dealer or visit us at www.daviespaints.com.ph
Disclaimer
The information in this product data sheet is given to the best of our knowledge based on laboratory testing and practical experience. We can only guarantee the product quality because there are conditions
in the actual painting application that is beyond our control. We reserve the right to change the given data without prior notice.
Davies Paints Philippines, Inc.
1415 A. Sandoval Ave., cor. Mercedes Ave., San Miguel, Pasig City
www.daviespaints.com.ph
Tel. (632) 8641 7101 / (632) 8570 7000
Fax (632) 8641 9004 / (632) 8641 2724
customercare@daviespaints.com.ph
May 20, 2021
Page 1 of 1