GRADE-9 TLE DRAFTING MODULE (TOPICS)
K TO 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD
EDUCATION LEARNING MODULE
Lesson 1 – Prepare Drafting Materials and Tools/Drawing Instruments
LO 1. Identify drafting materials and tools/drawing instruments applicable to a specific job
LO 2. Request, receive and inspect drafting materials and tools/drawing instruments
Lesson 2 – Perform Basic Mensuration and Calculation
LO 1. Select and use measuring instruments
LO 2. Clean and store measuring instruments
LO 3. Convert fraction to decimal and vice versa
LO 4. Convert English to Metric Measurement vice versa
Lesson 3 – Interpret Working Plans and Sketches
LO 1. Identify assembly and detailed drawing.
Lesson 4 – Apply Safety Practices
LO 1. Identify hazardous area
LO 2. Use personal protective clothing and devices
MOST ESSENTIAL LESSON IN DRAFTING
TOPIC 1: Kinds of Lines
TOPIC 2: 4 KINDS OF DRAWING
TOPIC 3: ALPHABETH OF LINES
TOPIC 4: GUIDELINES IN LETTERING
TOPIC 5: Maintain hand tools, drawing equipment and paraphernalia
TECHNOLOGY AND LIVELIHOOD EDUCATION-GRADE-9 ALTERNATIVE
DELIVERY MODE
Lesson 1: Draw Walls, Windows, Doors, Fixtures and Fittings
Lesson 2: Draw Grid and Dimension Lines According to Architectural Design Standard
Lesson 3: Use of Metric Scale System According to Magnitude of Plan
Lesson 4: Identify Sizes of Doors, Walls and Rooms Following the Schedule. Indicate
Letterings and Labels according to Drafting Standard
COMPETENCY- BASED LEARNING MATERIAL DRAFTING TECHNOLOGY
LO1: Plan and prepare for work
LO2: Prepare and set up tools and materials for drawing
LO3: Draft Site Development Plans
LO4: Draft Floor Plans
LO5: Draft Roof Plans
LO6: Draft Ceiling Plans
LO7: Draft Elevations and Sections
LO8: Prepare Presentation Drawings
Prepared By:
MISS.ROSE ANN M. ZARATAN
SST-III