INFO
DESIGNATED USE
OF
CT 14-100
 THIS EQUIPMENT IS DESIGNED EXCLUSIVELY FOR THE
MAKING-UP AND BREAKING-OUT OF INTERFERENCE
THREAD TUBULARS RANGING FROM 7-INCHES (177MM)
TO 14-INCHES (355MM) IN DIAMETER AT MAXIMUM
CONTINUOUS TORQUE OF 100.000 FT-LBS (135.000
Nm).
14 cm
 USING THIS EQUIPMENT FOR PURPOSES AND/OR IN
CONFIGURATIONS AND/OR WITH MODIFICATIONS
OTHER THAN THAT WHICH IS EXPRESSLY MENTIONED
ABOVE AND/OR IN THE OPERATING MANUAL IS
CONSIDERED CONTRARY TO ITS DESIGNATED USE
AND IS, THEREFORE, PROHITIBITED.
 OPERATING THIS EQUIPMENT WITHIN THE LIMITS OF
ITS DESIGNATED USE ALSO INVOLVES COMPLYING
WITH THE OPERATIONAL, INSPECTION AND
MAINTENANCE DIRECTIVES CONTAINED WITHIN THE
OPERATING MANUAL.
1 mm
14 cm
1 mm
Dimension
Length: 14 cm
Height: 14 cm
Cut Line: minimum 1 mm from the outline/ edge of the image