ASSIGNMENT
SHEET 1
A2
PLUMBING TOOLS
Name
OBJECTIVE 3
INTRODUCTION
_ Score
Using representative drawings, match common plumbing hand
tools to their names.
The exercise allows you to practice the identification of commonly
used plumbing hand tools.
Part 1
INSTRUCTIONS
Functional Reading
• Follow written
instructions
_
Identify the following types of cast iron pipe cutters. Write the
correct names in the blanks.
Ratchet cutter
Hydraulic cutter
Squeeze-type cutter
Cognitive Activities
• Select an alternative
Information AnalysiS
• Interpret graphical
information
1.
ASSIGNMENT SHEET 1 - Introduction
CIMC - A 2 - 39
to Plumbing
3.
2.
Part 2
INSTRUCTIONS
Identify the following types of cast iron pipe assembly tools. Write
the correct names in the blanks.
Pipe lubricant and brush
Pipe puller
1.
ASSIGNMENT
CIMC - A 2 - 40
SHEET 1 - Introduction to Plumbing
2.
Part 3
INSTRUCTIONS
Identify the following miscellaneous hand tools. Write the correct
names in the blanks.
Basin wrench
Utility level
1.
2.
ASSIGNMENT
CIMC-A2-41
SHEET 1 - Introduction to Plumbing
Torpedo level
Hack saw
3.
4.
Part 4
INSTRUCTIONS
Identity the following hand tools used to install plastic pipe. Write
the correct names in the blanks.
Blade-type cutter
Inside and outside pipe reamer
1.
ASSIGNMENT
CIMC - A 2 - 42
SHEET 1 ', Introduction
to Plumbing
2.
ASSIGNMENT SHEET 1 - Introduction
ClIIe - A 2 - 43
to Plumbing
ASSIGNMENT
SHEET 2
A2
PLUMBING TOOLS
Name
OBJECTIVE 4
_ Score
_
From drawings, write in the correct names of power tools used
in plumbing.
INTRODUCTION
Power tools greatly improve the efficiency of plumbers. This
exercise gives you practice i identifying those most commonly used.
INSTRUCTIONS
Identify the following types of power tools used by plumbers.
the correct names in the blanks.
Functional Reading
• Follow written
instructions
Air hammer
Bench band saw
Portable power driven
threading machine
Portable power-driven vise
stand
Electric power drain cleaner
Portable band saw
Cognitive Activities
• Select an alternative
Powder-actuated tool
Portable electric pipe
threader
Electric snake
Angle drill
Jig saw (saber saw)
Rotary hammer
Reciprocating saw
Chipping hammer
Information Analysis
• Interpret graphical
information
1.
ASSIGNMENT
CIMC-A2-4S
2.
SHEET 2 - Introduction
to Plumbing
Write
3.
4.
5.
6.
7.
8.
ASSIGNMENT
CIMC-A2-46
SHEET 2 - Introductron to Plumbing
9.
10.
11.
12.
ASSIGNMENT
. to Plumbing
CIMC
_ A 2 _ 47 SHEET 2 - Introductron
13.
14.
15.
ASSIGNMENT SHEET 2 - Introduction
CIMC - A 2 - 48
to Plumbing
ASSIGNMENT
SHEET 3
A2
PLUMBING TOOLS
Name
OBJECTIVE 5
INTRODUCTION
_ Score
_
Identify the names of plumbing test equipment and torches by
viewing their drawings.
You will be identifying plumbing test equipment, torches, and torch
accessories during this exercise.
Part 1
INSTRUCTIONS
Functional Reading
• Follow written
instructions
Identify the following types of testing equipment. Write the correct
names in the blanks.
Mechanical test plug
Test gauge assembly
Tire pump
Inflatable rubber test plugs
Test cap for copper or plastic
Cognitive Activities
• Select an alternative
Information Analysis
• Interpret graphical
information
1.
ASSIGNMENT SHEET 3 - Introduction
CIMC - A 2 - 49
2.
to Plumbing
3.
~~~I~~~~~~
SHEET 3 - Introduction to Plumbing
voteeh
Part 2
Torch handle
Tank key
Regulator
Large tip
Hose
Striker
High-temperature wraparound flame tip
21/2 pound liquified petroleum cylinder
20 pound liquified petroleum cylinder
Halide torch leak detector
Small tip
2.
1.
3.
4.
5.
ASSIGNMENT SHEET 3 • Introduction to Plumbing
CIMC - A 2 - 51
6.
7.
8.
9.
ASSIGNMENT
CIMC-A2-52
SHEET 3 - Introduction to Plumbing
10.
ASSIGNMENT
CIMC-A2-53
11.
SHEET 3 - Introduction to Plumbing