QUESTIONING TOOL
Questions to probe the candidate’s underpinning knowledge
Extension/Reflection Questions
1. Can you identify the light vehicle’s different basic parts and
its components?
Satisfactory
response
Yes
No


2. Do you know the difference between the drive train and the
transmission of the vehicle?


3. Can you discuss the different components of the interior
parts of the vehicle?


4. Can you enumerate all the materials and equipment needed
in cleaning the vehicle


5. Can you perform the cleaning of the vehicle with incomplete
materials available?


6. Can you do minor repair and service for the light vehicle


7. Can replace brake pads of a light vehicle


8. Did you maintain records and maintenance report.


9. Did you know the service requirement for major repair of
vehicle.


10. Can you diagnose particular vehicle faults and irregularities.


Safety Questions
11. Did you used gloves and apron for your protection in
cleaning the vehicle?


12. Did you ensure that the equipment and tools used for
cleaning were kept properly?


13. Did you keep all unused cleaning agents in a safe place
away from children’s reach?


14. Did you follow strictly manufacturer’s manual in doing
minor repair and service.


Contingency Questions
15. Do you know the consequences of not being able to follow
the guidelines set for cleaning the equipment?


16. Do you know how to troubleshoot problems that might
occur while you are cleaning the tools/ equipment after use?


17. Do you understand the importance of checking the
tools/equipment before leaving it in the storage room?


18. Do you know what to do if you happen change oil while its
hot.


Job Role/Environment Questions


19. Did you check that cleaning agents you have used were
thoroughly eliminated and washed off?


20. Did you disposed all wastes taken from the vehicle in the
waste bin?


21. Did you wear protective materials during cleaning to protect
yourself from unnecessary splash of solutions used?


Rules and Regulations


22. Did you follow the protocol on vehicle cleaning?


23. Did you follow the manufacturer’s manual in replacing and
conducting major repairs.


24. Did you follow the standard protocol in gloving and masking
prior to cleaning of vehicle and in repair and service.


25. Did you check for the safety of the equipment for future use 

as part of the regulation in the care and after care of tools/
equipment?
The
candidate’s
underpinning  Satisfactory
 Not
knowledge was:
Satisfactory
Trainers
Methodology Level I
Date Developed:
Sept. 10, 2023
Document No. NTTA-TM1-07
Issued by:
Date Revised:
Sept. 12, 2023
DRIVING NC II
Page __ of __
NTTA
Developed by:
KARLO N. ASICO
Revision # 01