6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) 5G RAN, Rel. 5G20A, Operating Documentation, Issue 02 (HTML) > BTS Descriptions > Nokia AirScale Radio Units Description > Nokia AirScale Macro Remote Radio Heads AirScale RRH 8T8R n78 320W (AZQL) AZQL (475130A) is introduced by 5GC001811. Functional description Table: AZQL functional specification Property Value Output power 320 W Output power of the cell per TX 39 to 46 dBm QAM up to 256 QAM Number of TXRX 8TX8RX Outdoor installation Yes Beamforming 1 sector, 1 carriers, 8T8R with 8 port calibrated antenna. Supported antenna types defined by 5GC001849 and 5GC001866. For more information see: 5GC002142 and 5GC001849. localhost:6002/informationbrowser/index.jsp 1/9 6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) Property Operating mode Value One cell 4T2R for one or two 4-port passive antennas 1) One or two cells 2T2R for one or two 2-port passive antennas SW supported technologies 5G NR Duplex mode, supported standard 5G NR TDD Frequency range 3480 to 3700 MHz, 3GPP band 78 Instantaneous bandwidth (iBW)/Occupied bandwidth (oBW) 100 MHz/100 MHz Number of carriers per pipe 1 Maximum number of UL/DL MIMO streams 4 Supported bandwidths 20, 40, 60, 80, 100 MHz Note: You can select only one operating mode for one radio unit. All cells must have the same carrier bandwidth and carrier frequency. Interfaces localhost:6002/informationbrowser/index.jsp 2/9 6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) Figure: AZQL interfaces Table: AZQL interfaces Interface localhost:6002/informationbrowser/index.jsp Label on the HW Number of interfaces Connector type Additional info 3/9 6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) Interface Label on the HW Number of interfaces Connector type Additional info Power Connector DC IN 1 OBTS APPB or APPC plug Optical interface OPT 1–2 2 SFP28 CPRI 9.8 Gbps, Nokia IP seal AOPC External Alarm and EAC 1 MDR26 6 alarm inputs and 1 Control control output Remote Electrical Tilt RET 1 AISG C485 - Antenna Connector ANT 1-8 8 4.3–10 Female - Calibration CAL 1 4.3–10 Female - Grounding GND 1 Screw, M8 or 2 x M5 - Antenna Line Devices (ALDs) support Table: AZQL interface for ALD support Property Value AISG RAE: AISG 2.0 CWA (for non-AISG installations) No Voltage 10–30 V localhost:6002/informationbrowser/index.jsp 4/9 6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) Property Power per port Value - Electrical specifications Table: AZQL electrical specifications Property Value Nominal supply voltage –48.0 V DC Nominal input voltage range –40.5 V DC to –57.0 V DC Extended input voltage range –36.0 V DC to –40.5 V DC –57.0 V DC to –60.0 V DC Power consumption Note: AZQL power consumption in 5G mode will be provided with next release of this document. 1) Two antennas supported via super-cell (DL data duplication and UL data summing). localhost:6002/informationbrowser/index.jsp 5/9 6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) Recommended parameter values Recommend value for dlQam256PowerBackoffSub6 parameter is: 1.5 dB for 3GPP performance requirement. 3 dB for high peak UE throughput (4x4 DL MIMO). Related optional items FPKA Flexi Pole Mounting Kit (471649A) FPKC Flexi Pole Mounting Kit (472821A) AMGV AirScale 417mm 19 rack/stack fixing (475397A) AMBO AirScale Book Mount Kit 201-225 (474280A) AMRB AirScale one clip bracket 126-200 (474581A) AMRC AirScale one clip rail 600 mm (474583A) AMFD AirScale 2 FPKx fixing adapter 600 (474293A) AMPA Pole Mounting Kit (30-120 mm) (473879A) ASFF AirScale 8T8R fan unit (475567A) ASAC EAC cable MDR26-open 6A+1C 5 m (475289A) APPB AirScale2 55A DC plug 3.3–10 mm2 (474282A) APPC AirScale2 55A DC plug 10–16 mm2 (474283A) ACPA AirScale 2 fiber protection kit (474297A) Installation options Pole localhost:6002/informationbrowser/index.jsp 6/9 6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) Wall One-clip mounting with AMRC Stack with AMGV (ASFF fan required) 19'' rack with AMGV (ASFF fan required) Dimensions and weight Table: AZQL dimensions and weight Parameter Height Details Dimension orientation 435 mm (17.13 in.) With mounting brackets: 561 mm (22.09 in.) Width 400 mm (15.74 in.) Depth 192 mm (7.56 in.) With mounting brackets: 217 mm (8.54 in.) Weight 25.5 kg (56.22 lb) Environmental specifications localhost:6002/informationbrowser/index.jsp 7/9 6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) Table: AZQL environmental specifications Property Maximum operational outdoor temperature (in the shade) Value 55°C (131°F) with fan or 10.8 km/h (6.7 mph) wind Maximum operational outdoor temperature (in the sun) with 50°C (122°F) fan or 10.8 km/h (6.7 mph) wind Maximum indoor temperature 45°C (113°F) Minimum operational temperature –40°C (–40°F) Cooling method Convection, optional fan IP rating IP65 Feature interdependencies There are no dependencies between the 5GC001811 feature and any other feature. Warnings, cautions or notes related to the product WARNING! WARNING! Risk of electric shock. localhost:6002/informationbrowser/index.jsp 8/9 6/12/2021 AirScale RRH 8T8R n78 320W (AZQL) Before turning RF power on, RF ports have to be terminated by nominal 50Ω load (for example, feeder with antenna). However, if these conditions are not met, the plastic caps that are delivered within the unused RF ports should remain in place. The plastic caps isolate RF power from the environment, and thus provide electric shock security in case RF power is accidentally on. NOTICE: The RRH without a fan should always be mounted in a vertical orientation with connectors on the bottom side to ensure convection cooling. Note: The minimum startup voltage is –40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down. Id: DN218047558 © 2020 Nokia. Nokia confidential. Issue: 05 localhost:6002/informationbrowser/index.jsp 9/9