Uploaded by wilson.tan1984

HCIA-Datacom certification H12-811 V1.0 Simulation Questions

advertisement
HCIA-Datacom V1.0
H12-811_V1.0-ENU
Real Dumps
https://www.certspots.com/exam/h12-811_v1-0/
H12-811_V1.0-ENU Real Dumps
1. Which of the following features does the OSPF protocol
have? (Multiple choice)
A. Division of Support Regions
B. Prone to routing loops
C. Calculate the shortest path by hops
D. Trigger update
Answer: AD
H12-811_V1.0-ENU Real Dumps
2. When deploying ACL on Huawei equipment, which of the following
descriptions is correct? (Multiple choice)
A. ACL can match the TCP/UDP port number of the packet, and can specify
the range of the port number
B. The same ACL can be called under multiple interfaces
C. When ACL defines rules, it can only be advanced in the order of 10, 20, 30
D. ACL cannot be used to filter OSPF traffic, because OSPF traffic is not
suitable for UDP protocol encapsulation
E. When the ACL is invoked on the interface, it can only be applied to the
outbound direction
Answer: AB
H12-811_V1.0-ENU Real Dumps
3. Compared with STP, which of the following port roles
are newly defined in RSTP? (Multiple choice)
A. Root port
B. Backup port
C. Alternate port
D. Specify port
Answer: BC
H12-811_V1.0-ENU Real Dumps
4. On the VRP operating platform, which of the following
commands can only view static routes?
A. display IP routing-table
B. display IP routing-table statistics
C. display IP routing-table verbose
D. display IP routing-table protocol static
Answer: D
H12-811_V1.0-ENU Real Dumps
5. Which of the following types of addresses are not
included in IPv6 addresses?
A. Multicast address
B. Anycast address
C. Unicast address
D. Broadcast address
Answer: D
H12-811_V1.0-ENU Real Dumps
6. What are the advantages of NFV? (Multiple choice)
A. Reduce equipment costs
B. Shorten the innovation cycle of network operation business
C. Network devices can manage distance in a unified version
D. A single platform provides services for different applications and
tenants
Answer: ABD
H12-811_V1.0-ENU Real Dumps
7. Which of the following stages is not included in the
process of PPPoE session establishment and
termination?
A. Discovery phase
B. Data Forwarding Phase
C. Session phase
D. Session termination phase
Answer: B
H12-811_V1.0-ENU Real Dumps
8. The user authentication that can be deployed in
WLAN has ( ). (Multiple choice)
A. Radius authentication
B. MAC address authentication
C. 802.1x authentication
D. Portal authentication
Answer: ABCD
H12-811_V1.0-ENU Real Dumps
9. Which of the following parameters are used in the spanning tree
calculation of the switching network running the STP protocol?
(Multiple choice)
A. Port ID
B. Forward Delay
C. Bridge ID
D. Root Path Cost
Answer: ACD
H12-811_V1.0-ENU Real Dumps
10. Which of the following are the basic parameters for
configuring static routing? (Multiple choice)
A. The MAC address of the outgoing interface
B. Destination network
C. The IP address of the next hop
D. Outgoing interface
Answer: BCD
Download