Full series of
of 4.5G/
4.5G/ 5G5G- oriented
orient ed ant
ant enna solut
solut ions
A s the 5 G era
era ap p roa ches,
ch es,h olog
ologr
rap h ic im ages,
ag es,V R -based
-ba sed social
socialn etw
etw ork ap
a p p lication s,in telligen tm an u fact
ac tu rin g,
au ton om ou s drivin g,telem
elem ed icin e,an d th e In ternet
erne t of Th in gs (I
(IoT)
oT )are b ecom
ec om in g r
rea
ea lity.A h igh sp eed
ee d w ireless
eless n etw ork
w ith w id e co verag
verage,
e,low latency,large cap
ca p acity an d sup
su p p ortin g large
large n u m b er ofd evices,is the k ey to im p lem en t th ese
ap p lication s.H u aw eib elieves th at th
th e w ireless target
target net
ne tw ork in th e 5 G era
era m u st b e o rien ted to co n tin u ou s 4.5
4.5 G
netw
netw ork
ork evolut
evoluti
ion a nd to t
the
he dep loym ent of new 5G frequ ency b an ds.S uch a target
arget netw
netw ork
ork m ust:
ust:
•
S up port
port 2T4 R or 4T4 R on allsub-2.6 G H z low -frequ ency ba nds.
•
S up port
port 4T4R on a llsub-2.6 G H z high-f
high-frequ ency ba nds and use 8 T8R and m assive M IM O techno logies in h otspot
otspots.
s.
•
U se 8T8 R a s a ba sic confi
configurati
guration forTD D spectrum
spectrum an d ad opt m assive
assive M IM O techn ology for
for urban h otspots.
otspots.
5G Target Net wor k
C-band
TDD
TDD
Bands
2600M H z
2300M H z
Bas i c
Ur b an
8T8R
M ass
assi
ive M IM O
2600M H z
2100M H z
1800M H z
FDD
Bands
F ul
ull
lB an ds
4T4R
M assive
M IM O
8T8R
1400M H z
900M H z
800M H z
F ul
ull
lba nd s 2T4 R
700M H z
O pe rat ors should
should pr iorit ize the f ollowing aspects
aspects duri ng 4.5G
4.5G network evolut
evolut ion and
and t he deployme
deployment
nt of new 5G
fr equency
equency bands to meet requirements
requirements f or a t arget
arget net work in t he 5G era:
•
Application
Applica
tion of new spectrum
N ew spectr
spectrum is being
being released
•
Capacit y imp rovement
•
Sit e d ens
ensification
ification
A large num ber of new ap pli
plicati
cations ha ve
A s netw
netw orks evolve tow
tow ards 5G ,an d
aroun d the w orld, includ
nclud ing the 60 0
be en driving rap id grow th in da ta
as the d em an d for con ne cti
ctivity o f
M H z,700 M H z,L band a nd 3.5 G H z.
ser
se rvices ,b ut th
th ey requ ire m ob ile
everything
hing grow s,op erators
erators ne ed to
The rapid d eploym ent of new
ne tw orks w ith g rea ter cap acit
acity an d
dep loy m ore
ore sites an d expand
spectrum
spectrum helps
helps ope rators
ators sho rten R O I
high
high er sp eed .To m ee t the se inc rea sing
co verage
vera ge .A s si
s ite a cq u isition cost,
co st,
pe riod s.S inc e a ntenn a s pa ce is
is
requ irem en ts,op erators in dif
differen t
lab or cost,an d tow er ren
ren ta lcos t
alw
alw ays lim ited ,op erators nee d to
region s im p lem en t variou s sol
so lu tion s,
inc rea se,TC O op tim ization m ust be
con side r fu tu re a p pli
plica tion of new
includ
nclud ing m ult
ulti-cha nn el (su ch a s 4T 4R or
fu lly con
c on sid ered d u rin g sit
site
spectr
spectrum du ring a ntenn
ntenn a d eploym
eploym ent.
ent.
8T8 R ),m ult
ulti-sector,
or, an d m assive
assive M IM O .
dep loym ent.
ent.
U ltra-w id eb an d ,sm allsize,m ult
ulti-arr
-array an d m ult
ulti-port
-port an tenna
en na s,m u lti-bea m an ten n as, F D D /TD D con verged
verged an ten n as,
an d A A U s su p p ortin g a gile site d ep loym en t w illb ecom
eco m e fi
first choi
cho ices for op erator
erators.
s.
A s a lead
ea d in g glob
glob alIC T so lu tion s pr
p rovid er,
er,H u aw eih as lau n ched
ch ed a se ries of both a cti
ctive a n d p assive
assive a n ten n a so lu tion s
ba sed on an in-depth un derst
derstan
an ding
ding of M B B netw
netw ork
ork d eploym
eploym ent an d develop m ent,
ent,helpi
helping op erat
erator
ors
s achieve
achieve
bu siness
ne ss success.
Mullti
Mu
ti-- ban
band
d anten
antenna
na solution
solutions
s
•
•
G olde n, D iam on d, an d P ea rlare three m ult
ulti-ban d, m ult
ulti-port, com pa ct de sign a ntenn a p latform s tha
tha t su pp ort FD D full
ull-ban d
4T4R.
The new M U N IC H (M U C )plat
platf
form
orm w illbe lau nch ed in 2 01 8.In ad dit
dition to F D D full
ull-band 4T 4R ,this
his p latf
atform
orm also
also su pp ort
orts L ba nd
4T .Th e M U C platf
platform ha s the h igh est integrati
ntegration in the ind us try.
•
H ua w ei's ful
full
lan ten na series a do pt com pa ct side -by-side de sign ,de liveri
vering s up erior perform an ce in a co m pa ct pa cka ge .
•
H ua w ei's ful
full
lan ten na series u se 4 .3 -10 c on ne ctors
ctors to
to im prove u ser expe rien ce,de liver su pe rior PIM
PIM pe rform an ce.
GDP series multi-band
multi- band antennas
2*690-960/4*1695-2690M
2*690-960/4*1695-2690M H z
W idth:
dth:429 m m
690-862/880-960/
1427-2690/4*16951427-2690/4*1695-2690M
2690M H z
W idth:
dth:369 m m
690-862/880-960/690-960/
1427-2690/4*16951427-2690/4*1695-2690M
2690M H z
W idth:
dth:469 m m
2*690 -960/2*142
-960/2*142 7-2690/
2*1695-2200/2*24902*1695-2200/2*2490-2690M
2690M H z
W idth:
dth:469 m m
GDP+MUC series multi- band antennas
FDD//TDD converged antenna soluti
FDD
solutions
ons
•
A new LO N D O N (LO N )platf
atform
orm w illbe laun
laun ched in 201 8.O ne singl
single
antenna
antenna can support
support both
both FD D full-band 4T4R and TD D 8T8R .
•
Also
Also support
support 5G 8T8R N R .
•
R em otel
otely a nd ind ep en de ntly a djus
djus tm en t of electrical do w ntilt for
each fr
frequ ency ban d.
•
FDD 2 Low B ands:2*690960 M H z;3 H igh B ands:
2*1427-2690/16952 69
69 0M
0M H z
TDD 2 Bands: 23002690/33002690/
3300-3800M
3800M H z
S ize ： 4 4 9*
9* 20
20 6 m m
S up ported op tim al an d fl
flexible coverage
coverage w ith E asyB eam of TD D
band.
FulllFu
l-ser
series
ies mult
multii-secto
sector
r antenn
antenna
a solutions
•
S up port ind ep end en t high-ba nd an d low -band 6-sector
6-sector netw
netw orks for
for a cap acit
acity increase u p to 1 .7 ti
tim es.
•
S up port 3 a nd 6-sector
6-sector hybri
hybrid n etw
etw orks
orks a nd 9-sector
9-sector netw
netw orks.
orks.
•
S up po rt 3D 18 -sector
-sector netw
netw orks for
for a ca pa city increa se of up to 3.5
3.5 tim es.
•
S up port m ult
ulti-sector
sector 4T4 R L TE n etw
etw orks.
orks.
6- Sector Network
High- band
Low- band
2*(1710-2200)M H z
2*(690 -960 )M H z
9- Sector Network
Low- band
High-band
2*(69
2*(69 0-96 0)
2*(1710-2200)M H z
High-band 4T4R
High-band
tri-bea
tri-beam
m
4*(1710-2200)M H z
3*(1710-2690)M H z
Hybrid Network (3-Sector&6-Sector/
(3-Sector&6-Sector/66-Sector
Sector & 4T4R)
3D 18-Sector Network
Hybrid tri-be
-beam
Hybrid quad-be
-beam
Hybrid penta-be
-beam
Hybrid hepta-be
-beam
3DHexa-beam
790-960/
2*(1710-2200)M H z
2*(171 0-2200)
/2*(171 0-2690)M
0-2690)M H z
69 0-960 /2*(16 95 -2690)
2*(1695-2200)M H z
690 -960/2*(24 90 -2690)
4*(1695-2200)M H z
6*(1710-2200)M H z
TDD
TD
D antenna
antenna soluti
solutions
ons
•
8T8 R is sup ported on m ainstr
nstream frequ ency ba nds rang ing fr
from 2.3 G H z to
to 2 .6 G H z,an d fr
from 3.3 G H z to
to 3 .8 G H z,easing the
strain
ain on cu rrent cap ac ity.
•
Th e ad van ced softsp lit fea ture allow s 8 T8 R to d eliver 1.5
1.5 ti
tim es ca pa city im provem en t tha n 4 T4 R .
•
S up ported optim al an d fl
flexible coverage
coverage w ith E asyB eam .
Active
Acti
ve anten
antenna
na soluti
solutions
ons
•
The integrat
ntegrated
ed design
design of a m ult
ulti-band A AU redu ces the
the
num ber ofsite devices need ed by 6 0% and reduces the
the
TCO by30% .
•
M ult
ulti-band AA U s su pp ort8T8 R ,ach ieving a ca pa city
increa se of up to 3 tim es.
•
Th e E as y M acro 2 .0 p ole s ite s olution fea tures a
ligh tw eigh
eigh t an d cyl
c ylin d rica lde sign .A n E as y M ac ro 2.0
2.0
p ole
ole si
s ite ca n b e ea
e a sily in stalled on a p ole
ole w ith in o n ly
tw o hou rs.
AAU3
AA
U391X
91X
AAU5
AA
U5972
972
AAU3
AA
U3920
920
AAU3
AA
U3961
961
Huawei AAUproducts
AAU3
AA
U3940
940
AAU5
AA
U5940
940
(Easy
(Ea
sy Macr oTM 2.0)
Innovation
A ntenn as play
play a key role in w ireless n etw
etw orks,so H ua w eiw illcon tinu e to invest in an ten na -related R & D .H ua w ei curren
curren tly h as eigh t
R & D centers
centers com m itted to b oth
oth a cti
ctive an d p assive antenna techn ology aroun d the w orl
orld: M un ich, N ew Jersey,
Jersey,O ttaw a, S tockh olm ,
M oscow ,S hen zhen ,Xi'an ,an d S ha ngh ai.W ith m ore
ore than 20 years'experience of w ireless n etw
etw orks,
orks,H ua w eiis a ble to coo rdina te the
an ten na design
design an d the R A N experience for the best antenna perform
orm an ce in ind ustr
ustry.
Moscow,
Russia
Xi'an,
China
Munich,
Germany
Ottawa,
Canada
Shanghai,
China
Stockholm,
Sweden
New Jersey,
USA
Shenzhen,
China
AAS & Passive antenna
AAS
Passive antenna
Distribution
Distri
bution of Huawei antenna R&D centers around the world
Awards
•
20 17 B est M obil
obile Infrastructure
ucture Aw ard in M W C 20 17 ,for H ua w ei's
A AU solutions.
•
20 16 G TB M ob ile N etw ork Infras truc ture Inn ovation A w ard, for the
9-sector solution jointly lau nc he d by H ua w ei an d Telen
Telen or
M yanm ar,
ar,and the 4.5G antenna joi
jointl
ntly laun ched by H uaw eiand
Tu rk Telek
Telek om
•
20 15 G TB M ob ile N etw ork Infras truc ture Inn ovation A w ard, for the
E asyB eam soluti
ution joi
jointl
ntly lau nch ed by H ua w eian d C hina M obil
obile
•
20 14 G TB M ob ile N etw ork Infras truc ture Inn ovation A w ard, for the
S A A so lution jointly lau nch ed b y H ua w ei an d C hina
hina T eleco m
Huawei
Huawei SG178
SG178 mult i-pr obe spherical
spherical nearnear- field testi ng system
system
Industry Contribution
Huawei
Huawei has been commit
commit t ed to conti nuous development
development and t o the pr ogresses
ogresses of t he ent
ent ire antenna indust ry.
•
H ua w eiis a m em ber of m ore
ore tha
tha n 5 0 stan
stan da rds o rgan izati
zation s an d h as con tinu ou sly con tribu ted to ind ustr
ustry stan
stan da rds.
•
S o far,
far,H ua w ei an d variou s ope rators
ators ha ve succe ssful
ssfull
ly he ld the G lob al A ntenn a T ech no logy & Ind us try Fo rum six tim es. Th e
forum a ttracts glob a ltop tier op erators,th ird-pa rty o rgan ization s,tow er com pa nies,
nies, in du stry orga n iza tion s, an d in
in du stry m ed ia
ou tlets,
ets, an d h as b eco m e a w ell-kno w n p latform for discu
discu ssion of future
uture a ntenn a techn ologies
ogies a nd ind ustry
ustry tr
tren ds.
•
H ua w ei lea ds the
the N G M N 4.3
4.3 -10 con ne ctor
ctor w ork grou
grou p, jointly prom oti
oting the m igrati
gration to 4.3 -10 con ne ctors
ctors w ith the en tire
ind us try cha in .
Product
Produ
ct Mode
Modell NamingRule
Antenna Model Naming Example:
Example:
A
OC
45
18
R
0
Notes for frequency characters:
characters:
v06
45: Single-band antennas (450-470 MHz)
70: Single-band antennas (690-960 MHz)
79: Single-band antennas (790-960 MHz)
19: Single-band antennas
ant ennas (1710-2200 MHz or 1710-2170 MHz)
26: Single-band antennas (1710-2690 MHz)
DU:: Dual-band antennas
DU
TR: Tri-band antennas
QU: Quad-band antennas
PE:: Penta-band antennas
PE
SI: Six-band
Six-band antennas
HP: Hepta-band antennas
OC: Octa-band antennas
TD: TDD
TDD antennas
ant ennas
MB: Multi- bea
beam
m antenn
antennas
as
v06/v07: 4.3-10 connector
v01/v02 version (optional)
Different ant enna in ascending
ascending order
Antenna types
R: RCU
RCU Integrat ed
Number: MET or FET
S: Clust
Clust er antenna
Gain (the maximum gain of all the band)
Polarization
Frequency characters
OC: Octa- band
A: Antenna products
C: Camouflage antennas
RCU Model Naming Example:
A
RCU
020
04
v01
AIMM Model Naming Example:
A
IM M
21
S
11
EB
v01
v01/v02 version (optional)
v01/v02 version
version (opti onal)
Functional character (optional)
EB: Easy Beam
Different RCU in ascending order
00-- METmodule
11-- AISG
AISG interf ace: 1 input 1 output
22-- AISG
AISG interf ace: 2 input 2 output
AISG version
011: AISG 1.1
020: AISG2.0
AIMM types
S: for single-band antenna
D: for dual-band ant enna
M: for multi- band antenna
RCU
RCU
AISG versi on: 20 (AISG 2.0)/21 (AISG2.1)
IMM: Information management module
ALD products
TMA Model
Model Nami
Naming Example:
Example:
A
TA
26
20
00
v06
ALD products
Combiner Model Naming Example:
A
v06: 4.3-10 connector
v01/v02 version (optional)
Different TMAin ascending order
AISG version
11: AISG 1.1
20: AISG 2.0
Frequency
26: 2600M TMA
DU: DualDual- band TMA
TA: TMA
COM
D
2
H
11
v06
v06: 4.3-10 connector
v01/v02 version (optional)
Different combiner in ascending order
DC bypass properties
H: High-band DC bypass
L: Low-band DCbypass
A: All bands DCbypass
(4.3-10 connector only)
S: Auto-sense DC bypass
N: Filter or No DC bypass
2: Dual
Dual uni t
Frequency
Frequency character
D: Dual-band combiner
T: Triple-band
Triple-band combiner
Q: Quad-band
Quad-band combiner
combi ner
COM: Combiner
ALD products
ALD products
AISG Colour Coding
AntennaPort ColourCoding
Colour coding is used t o identif y antenna RF ports and also for RET remote identi fi cation. Colour coding consists of
five part s generally: colour code, pat t ern coding, array numbering, array symbol and RCU serial number.
14-Port EasyRETantenna is used as an example to ill ustr ate colour coding:
1. ColourCode
2. Pattern Coding
(Used to distinguish different
bands. For details, please see
chapter 1.)
(Used to diff erentiat e array ports
carrying the same colour code.
For details, please see chapter 2.)
3. Array Numbering
(Used to mark dif ferent array ID and
array positions. For details, please
see chapter 3.)
4. Array Symbol
(Used to display the physical st ructure of t he antennas. For detail s, please see chapter 4.)
Two types of array symbol ar e used (Type 1 and Type 2). Whic h type i s used depends on specif ic ant ennas. This also
appli es to chapt er 3 Array numbering and chapter 7 RCU serial numb er.
Type 1
Type 2
2 LowBands Filtered
r1: 690-862MHz
r2: 880-960MHz
r1 and r2 share the same low- band array
Lb1Ly1
Cb2
r1
Rb3Ry2
r2
5 high-band arrays
Cb2: 1427-2200MHz
Lb1, Rb3: 1695-2200MHz
Ly1, Ry2: 2490-2690MHz
Lb1 and Ly1 share the same high- band array
Rb3 and Ry2 share the same high-band array
2 LowBands Filtered
r: 690-862MHz
rr: 880-960MHz
r and rr share the same low-band array
bL yL
bbC bbbRyyR
r
rr
5 high-band arrays
bbC: 1427-2200MHz
bL, bbbR: 1695- 2200MHz
yL, yyR: 2490-2690MHz
bL and yL share the same high-band array
bbbR and yyR share the same high-band array
5. Integrated RCU Serial Number
(Used to di stinguish RCUs of di ff erent bands to support remote RCU identi fi cation. For det ails, please see chapter 5.)
Type 1:
HWMxxx..........r1
HWMxxx..........r2
HWMxxx..........Lb1
HWMxxx..........Ly1
Type 2:
HWMxxx..........Cb2
HWMxxx..........Rb3
HWMxxx..........Ry2
HWMxxx..........r
HWMxxx..........rr
HWMxxx..........bL
HWMxxx..........yL
HWMxxx..........bbC
HWMxxx..........bbbR
HWMxxx..........yyR
AISG Colour Coding
1. ColourCode
Accordi ng t o AISG, the upp er band edge ranges of t he antenna port are represent ed by red, green, blue, and yell ow
in sequence fr om the low b and range to t he high band range. The foll owing table shows the definit ion of t he
fr equency range and t he associated colour code abbreviati on.
Upper Band Edge Range
Assigned Colour Code
Colour Code Abbreviation
700MHz t o 1000MHz
RAL 3020
r
1001MHz t o 1700MHz
RAL 6029
g
1701MHz t o 2300MHz
RAL 5015
b
2301MHz t o 4000MHz
RAL 1023
y
2. Pattern Coding
Patt ern coding is used t o diff erentiat e array port s carrying the same colour code.
Two t ypes of pat t ern coding are used (Type A and Type B). Which t ype is used d epends on specifi c ant ennas.
Type A:
The number of dots i s shown in t he following figure.
Note: The dot may be black or whit e.
y1
y2
y3
y4
y6
y5
Type B:
Different segments of colour and gaps are shown in t he foll owing fi gure.
Note: Gaps between coloured segments may be whit e gaps or black l ines.
y1
(or y)
y2
(or yy)
y3
(or yyy)
y4
(or yyyy)
y5
(or yyyyy)
3. Array Numbering
For mul t i- band antennas, diff erent arrays are indicat ed by their colour code abbreviati ons, array IDs, as well as
array positions. There are t wo t ypes of array numbering.
yy
- band array.
AISG Colour Coding
Array posit ion is r epresent ed by abbreviati on (e.g. L, C, R, T, M, and B), t he foll owing table shows t he details.
Array Horizontal Definition
Array Vertical Definition
Abbreviation
Full Name
Abbreviation
Full Name
L
Left Array
T
Top Array
C
Cent er Array
M
Middle Array
R
Right Array
B
Bot t om Array
Take 14-port antenna for example, array wit h Ry2 or yyR means t he second high-band array and located at right
position inside of ant enna.
4. ArraySymbol
In order t o bett er display the physical st ruct ure of Huawei antennas, the array symbol corresponding t o the array ID
and array positi on is shown in t he catalogue.
The foll owing figures show t he physical st ruct ures of dif ferent antennas as examples:
Type 1
I. 4-Port Antenna
2 Filtered Low Bands ("Dipole reuse")
e.g. 790-862/880- 960 or
690-803/824-960 MHz
r1
or
r2
r
Type 1
III.4-Port Antenna
2 Side-by-side High-band Arrays
e.g. 1710-2690/1710-2690 MHz
Ly1
Type 2
or
Ry2
Type 1
II. 4-Port Antenna
2 Filtered High Bands ("Dipole reuse")
e.g. 1710-2170/2490-2690 MHz
rr
Type 2
yL
yyR
Type 2
b1 y1
Type 1
IV.6-Port Antenna
1 Low Band
2 Side-by-side High-band Arrays
e.g. 790-960/1710-2690/17102690 or 690- 960/17102690/1710-2690 MHz
or
Ly1
b
or
Ry2
y
Type 2
yL
yyR
r1
Type 1
V. 8-Port Antenna
1 Low Band
3 Side-by-side High-band
Arrays
e.g. 690-960/1710-2690/
1710-2690/1710-2690 MHz
Ly1
Cy2
r1
or
Ry3
Type 1
Type 2
yL
yyC
r
yyyR
VI.10-Port Antenna
1 Low Band and
4 High-bands
e.g. 690-960/1695-2690/
1695-2690/1695-2690/
1695-2690 MHz
r
or
Type 2
LTy1
RTy3
yLT
yyyRT
LBy2
RBy4
yyLB
yyyyRB
r1
r
AISG Colour Coding
5.RCU Serial Number
The SN (serial num ber) of int egrated RCU contai ns colour coding inform at ion, EasyRETant ennas support remot e
RCU ident ifi cation by colour coding.
The SN of an int egrated RCU contains 19 di git s. The f oll owing describ es a hexa- band EasyRETant enna's SN as an
example:
Type 1: H W M 2
4 3 0 G 9
0
0
1
0
0
2
1
R
y
2
Type 2: H W M 2
4 3 0 G 9
0
0
1
0
0
2
1
y
y
R
Color coding:
Use the last or l ast several
digit s to show the band
features and position of the
antenna port. Fill other digits
that are not used with a
random code.
Running number (random)
Delivery month (9: september)
Delivery year (G: t he year of 2016)
ITEM code of th e antenna
RET Type, M : i nt egrated RCU
Manufactur er code, fi xed as HW
L: Low Band, ≤960MHz; H: High Band, >960MHz
1LnH: means 1 Low Band and n High Bands, n: 1, 2, 3.....
A
Active Antenna
U
A
A
AAU
B - 1 Low Band
B-2 High Band
2 ports
4 ports
2 ports
6 ports
4 ports
8 ports
4 ports - 1L1H
Multi-band
B-3 1LnH
6 ports - 1L2H
8 ports - 1L3H
B
Passive Antenna
B-4 2LnH
B-5 3LnH
10 ports - 1L4H
12 ports - 1L5H
6 ports - 2L1H
12 ports - 2L4H
8 ports - 2L2H
14 ports - 2L5H
10 ports - 2L3H
16 ports - 2L6H
10 ports - 3L2H
14 ports - 3L4H
12 ports - 3L3H
16 ports - 3L5H
C
TDD Antenna
FDD+TDD / TDD 8T8R Antenna
Other Antenna
Camouflage / Small Antenna
C - 1 RET System
C - 2 Intelligent Management
D - 1 TMA
D
Antenna Line
Product
D - 2 Combiner
E
Bracket &
Installation Guide
E - 1 Bracket
E - 2 Installation Guide
s
tr
o
p
4
2
d
n
a
B
h
ig
H
s
t
r
o
p
8
2
d
n
a
B
H
n
L
1
s
tr
o
p
2
1
4
d
n
a
B
H
n
L
2
s
tr
o
p
6
1
6
d
n
a
B
H
n
L
3
s
tr
o
p
6
1
0
1
m
a
e
b
itl
u
M
Multi-beam
Digital Antenna
System
d
n
a
B
w
o
L
&
D
D
T
s
r
e
h
t
O
l
a
it
ig
D
A
M
T
r
e
in
b
m
o
C
e
d
i
u
& G
t n
e o
k i
c t
a
a
r ll
B a
t
s
n
I
Product Replacement List 1
Product in the catalogue 2017
Product in the catalogue 2018
1LnH
ATR4517R3v06
ATR4517R3v07
ATR4517R1v06
ATR4517R1v07
ATR4518R4v06
ATR4518R4v07
ATR4518R7v06
ATR4518R7v07
AQU4518R14v06
AQU4518R14v07
AQU4518R11v06
AQU4518R11v07
AQU4518R22v06
AQU4518R22v07
TMA
ATA702000
ATA702000v06
ATA262000
ATA262000v06
ATADU2003
ATADU2003v06
ATADU2001
ATADU2016v06
ATADU2005
ATADU2005v06
ATADU2015
ATADU2015v06
Product Replacement List 2
Product in the catalogue 2017
Product in the catalogue 2018
Combiner
ACOMD2H09
ACOMD2H25v06
ACOMD2H18
ACOMD2A07v06
ACOMD2L08
ACOMD2L08v06
ACOMD2H11
ACOMD2H11v06
ACOMD2H00
ACOMD2H00v06
ACOMD2H22
ACOMD2H22v06
ACOMD2H06
ACOMD2H26v06
ACOMD2H08
ACOMD2A06v06
ACOMD2L04
ACOMD2L13v06
ACOMD2H16
ACOMD2A08v06
ACOMT2H04
ACOMT2H04v06
ACOMT2A02
ACOMT2A02v06
ACOMT2H01
ACOMT2H01v06
ACOMT2H03
ACOMT2H03v06
ACOMT2H08
ACOMT2H08v06
ACOMT2A03
ACOMT2A03v06
ACOMT2A04
ACOMT2A04v06
ACOMQ2A01
ACOMQ2A01v06
ADCSTOP00
ADCSTOP00v06
Index of Antenna and Antenna Line Product
The products are li sted in an alphabeti cal & numeric order. New or changed product.
Model
Page
Model
Page
Model
Page
Model
Page
Active Antenna
ADU450900v06
271
AMB4519R0v06
229
AQU4517R4v06
148
ADU451200v06
272
AMB4519R2v06
237
AQU4518R11v07
111
AAU3910
5
ADU4515R0v06
39
AMB4519R3v06
245
AQU4518R14v07
108
AAU3911
3
ADU4515R5v06
33
AMB4519R4v06
240
AQU4518R17v06
155
AAU3920
7
ADU4516R0v06
41
AMB4520R0v06
233
AQU4518R19v06
153
AAU3940
13
ADU4516R6v06
35
AMB4520R2v06
235
AQU4518R21v06
65
AAU3961
1
ADU4517R0v06
43
AMB4520R4v06
243
AQU4518R22v07
117
AAU5940
11
ADU4517R3v06
77
AMB4520R5v06
231
AQU4518R23v06
142
AAU5972
9
ADU4517R6v06
37
AMB4520R6v06
248
AQU4518R24v06
144
ADU4518R0v06
81
AMB4521R0v06
250
AQU4518R25v06
146
ADU4518R10v06
83
AMB452200v06
252
AQU4518R27v06
114
ADU4518R11v06
85
AQU4518R30v07
150
ADU4518R12v06
87
AQU4518R4v06
151
ADU4518R1v06
55
AOC4518R0v06
224
AQU4518R9v06
112
ADU4518R3v06
79
AOC4518R3v06
212
ADU4518R6v06
57
ASI4517R3v06
187
Passive Antenna
A194518R0v06
47
A264518R0v06
49
ADU4518R7v06
73
A264518S0
268
ADU4518R8v06
75
APE4516R1v06
120
ASI4518R10v06
189
A264521R1v06
51
ADU4518R9v06
71
APE4517R0v06
122
ASI4518R11v06
193
A264521R2v06
53
ADU4521R0v06
59
APE4518R0v06
166
ASI4518R14v06
185
APE4518R12v06
175
ASI4518R18v06
218
APE4518R13v06
157
ASI4518R30v06
124
A704515R0v06
17
AHP4517R0v07
208
APE4518R14v06
160
ASI4518R31v06
182
A704516R0v06
19
AHP4517R1v06
205
APE4518R16v06
177
ASI4518R37v06
191
A704517R0v06
21
AHP4517R2v06
209
APE4518R17v06
172
ASI4518R39v06
192
A704521R0v06
23
AHP4518R2v06
221
APE4518R19v06
118
ASI4518R40v06
257
A794515R0v06
25
AHP4518R3v06
198
APE4518R1v06
169
ASI4518R4v06
196
A794515R1v06
31
AHP4518R4v06
199
APE4518R20v06
179
A794516R0v06
27
AHP4518R5v06
202
APE4518R25v07
217
A794517R0v06
29
APE4518R30v06
163
Model
Page
Model
Page
Model
Page
ATA262000v06
313
ACOMQ2A01v06
380
ATD4516R5
258
ATA702000v06
302
ACOMT2A02v06
368
ATD4516R8
262
ATA802001v06
305
ACOMT2A03v06
374
ATD4516R9
266
ATA902007v06
307
ACOMT2A04v06
377
ATADU2003v06
318
ACOMT2H01v06
ATADU2005v06
324
Model
Page
AREU01301
284
371
ASBT00001
286
ACOMT2H03v06
371
ASBT00001v06
289
ATR4516R0v06
98
ATADU2015v06
327
ACOMT2H04v06
365
ASBT00002
286
ATR4517R0v06
100
ATADU2016v06
321
ACOMT2H08v06
371
ASBT00002v06
289
ATR4517R1v07
102
ATADU2017v06
316
ATR4517R3v07
96
ATATR2002v06
330
ATR4517R5v06
136
ATR4518R11v06
94
ATR4518R12v06
140
ATR4518R13v06
90
ATR4518R14v06
63
ACOMD2A00v06
356
ATR4518R15v06
61
ACOMD2A06v06
353
AIMM20D11v01
ATR4518R24v06
130
ACOMD2A07v06
338
ATR4518R25v06
132
ACOMD2A08v06
ATR4518R26v06
134
ATR4518R28v06
Bracket
ADCSTOP00v06
383
Combiner
Digital Antenna
System
ASMC00001
387
ASMC00002
387
ASMC00003
387
280
ASMC00006
399
AIMM20D22v01
281
ASMC00012
394
359
AIMM20M11v01
282
ASMC00013
395
ACOMD2H00v06
347
AIMM20M22v01
283
ASMC00014
396
89
ACOMD2H11v06
344
AIMM20S11v01
279
ASMC00015
397
ATR4518R2v06
138
ACOMD2H19v06
344
ASMC00016
398
ATR4518R4v07
104
ACOMD2H22v06
347
ASMDT0A01
388
ATR4518R6v06
92
ACOMD2H25v06
338
ASMDT0B01
389
ATR4518R7v07
106
ACOMD2H26v06
353
ASMDT0C01
390
ATR4518S0v06
270
ACOMD2H27v06
359
ASMDT0D01
391
ACOMD2L08v06
341
ASMDT0F01
393
ACOMD2L11v06
338
ASMDT0G01
392
ACOMD2L13v06
359
ASMWM0001
400
ACOMD2S02v06
350
ARCU02001
277
ARCU02004v01
278
TMA
ATA182003v06
309
ACOMD2S03v06
362
ATA212007v06
311
ACOMD2S05v06
335
AISU00001v01
APAA00001
299
297
EasyRETand METAntennaCorrespondingList
EasyRET Antenna
MET Antenna
(Corr espondi ng t o EasyRET)
Model
Model
A794515R0v06
A79451500v06
A794516R0v06
A79451600v06
A794517R0v06
A79451700v06
A794515R1v06
A79451503v06
A704515R0v06
A79451702v06
A704521R0v06
A70452100v06
A194518R0v06
A19451811v06
A264518R0v06
A26451800v06
ADU4518R1v06
ADU451819v06
ADU4518R6v06
ADU451816v06
ATR4518R15v06
ATR451807v06
ATR4518R14v06
ATR451714v06
ADU4517R3v06
ADU451503v06
ADU4518R3v06
ADU451602v06
ADU4518R0v06
ADU451807v06
ADU4518R10v06
ADU451716v06
ADU4518R11v06
ADU451604v06
ADU4518R12v06
ADU451712v06
ATR4516R0v06
ATR451602v06
ATR4517R3v06
ATR451715v06
ATR4517R0v06
ATR451704v06
ATR4517R1v06
ATR451709v06
ATR4518R4v06
ATR451606v06
ATR4518R7v06
ATR451607v06
AMB4520R5v06
AMB452003v06
AMB4520R0v06
AMB452000v06
U
A
A
A. Active Antenna
Model
Page
A- 1
AAU3961
1
A- 2
AAU3911
3
A- 3
AAU3910
5
A- 4
AAU3920
7
A- 5
AAU5972
9
A- 6
AAU5940
11
A- 7
AAU3940
13

℃
℃
°
°
1
°
°
°
±
°
°
±
±
±
±
±
±
±
±
±
±
±
≥
≥
±
°
°
Ω
°
°
°
±
°
±
°
±
±
±
±
±
±
±
±
±
±
≥
≥
±
°
°
Ω
2
±
±
±
±
±
±
±
±
±


℃
℃
°
3
DX-1710-2690-65-18i-M-R
EasyRET2-Port Antenna with 1 Integrated RCU - 1.4m
Model: A264518R0v06
Antenna Specifications
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarizat ion
2200 - 2490
2490 - 2690
d
n
a
B
h
g
i
H
+45° , -45°
Electrical downtilt (°)
0 - 12 , cont inuously adjust able
at mid Tilt
17.4
18.0
18.5
18.6
17.2 ±0.3
17.6 ±0.5
18.3 ±0.4
18.4 ±0.4
> 18
> 18
> 18
> 18
Horizontal 3dB beam widt h ( °)
68 ±2.0
65 ±2.4
62 ±2.7
60 ±1.5
Vertical 3dB beam widt h (°)
6.8 ±0.4
6.1 ±0.4
5.5 ±0.4
5.0 ±0.3
Gain (dBi)
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 30
Front to back ratio,
±30 ° (dB)
> 28
> 29
> 29
> 29
0°
> 20
> 20
> 20
> 20
Cross polar rat io (dB)
Max. power per input (W)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendati ons on Base St ati on Ant enna St andards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1365 x 155 x 89
Packing dimensions (H x W x D) (mm)
1695 x 195 x 155
Antenna weight (kg)
7.0
Clamps weight (kg)
2.0 (2 unit s)
Ant enna packing weight (kg)
64
11.5 (included clamps)
Mast diamet er support ed (mm)
38 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
5
6
3
1
Frontal:
330 (at 150 km/ h)
Lateral:
165 (at 150 km/ h)
Rear side: 375 (at 150 km/h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
2 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0A01
Mechanical downtilt:
0 - 12 °
0.6 kg
1 (Separat e p acking)
49
2
9
3
1
s
t
r
o
P
8
2
DX-1710-2690-65-18i-M-R
EasyRET2-Port Antenna with 1 Integrated RCU - 1.4m
Model: A264518R0v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor act ivated, 12V)
< 0.5 (stand by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy c hain in: Male / Daisy chain out : Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swi tc hable bet ween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed outdoor), EN 55032 (Emissi on),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part15 , ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx…...y
y - Yellow
Pattern sample for reference
1710 - 2690 MHz
50
y
DX-1695-2690-65-21i-M-R
EasyRET2-Port Antenna with 1 Integrated RCU - 2.0m
Model: A264521R1v06
Antenna Specifications
Electrical Properties
1695 - 2690
Frequency range (MHz)
1695 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
d
n
a
B
h
g
i
H
+45° , -45°
Polarizat ion
Electrical downtilt (°)
0 - 6 , cont inuously adjust able
at mid Tilt
Gain (dBi)
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
19.8
20.3
20.7
21.0
19.8 ±0.5
20.3 ±0.5
20.7 ±0.5
21.0 ±0.5
> 18
> 17
> 17
> 17
68 ±4
65 ±3
61 ±2
59 ±4
4.4 ±0.4
4.0 ±0.4
3.5 ±0.2
3.3 ±0.3
VSWR
< 1.5
Cross polar isol ation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 27
> 27
> 27
> 27
0°
> 20
> 20
> 20
> 20
Cross polar rat io (dB)
Max. power per input (W)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier )
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical datasheet in XML format is available.
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2099 x 155 x 89
Packing dimensions (H x W x D) (mm)
2515 x 210 x 170
Antenna weight (kg)
9.8
Clamps weight (kg)
2.9 (2 unit s)
Ant enna packing weight (kg)
106
16.8 (Included clamps)
Mast diamet er support ed (mm)
50 -115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
0
3
1
2
Frontal:
540 (at 150 km/ h)
Lateral:
265 (at 150 km/ h)
Rear side: 615 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
9
9
0
2
0
1
3
1
2 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt: 0 - 12 °
1.3 kg
1 ( Separ ate packing)
51
s
t
r
o
P
8
2
DX-1695-2690-65-21i-M-R
EasyRET2-Port Antenna with 1 Integrated RCU - 2.0m
Model: A264521R1v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
< 5 (motor act ivated, 12V)
< 0.5 (st and by, 12V)
Power consumpt ion (W)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swi tc hable bet ween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
y - Yellow
Pattern sample for reference
1695 - 2690 MHz
52
y
DX-1695-2690-33-21i-M-R
EasyRET2-Port Antenna with 1 Integrated RCU - 1.4m
Model: A264521R2v06
Antenna Specifications
Electrical Properties
1695 - 2690
Frequency range (MHz)
1695 - 1990
1920 - 2200
Polarizat ion
2200 - 2490
2490 - 2690
d
n
a
B
h
g
i
H
+45° , -45°
Electrical downtilt (°)
2 - 12 , cont inuously adjust able
at mid Tilt
19.5
19.8
19.9
20.0
19.4 ±0.5
19.7 ±0.4
19.8 ±0.4
19.9 ±0.5
> 17
> 17
> 16
> 16
Horizontal 3dB beam widt h ( °)
36 ±2.0
34 ±1.5
32 ±1.5
30 ±1.5
Vertical 3dB beam widt h (°)
7.1 ±0.5
6.5 ±0.5
5.5 ±0.4
5.1 ±0.4
Gain (dBi)
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 29
> 32
> 33
> 33
0°
> 21
> 21
> 20
> 24
Cross polar rat io (dB)
Max. power per input (W)
250 (at 50 ℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1365 x 299 x 109
Packing dimensions (H x W x D) (mm)
1660 x 347 x 180
Antenna weight (kg)
13.4
Clamps weight (kg)
2.9 (2 unit s)
Ant enna packing weight (kg)
106
21.3 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1
5
2
1
Frontal:
490 (at 150 km/h)
Lateral:
100 (at 150 km/ h)
Rear side: 565 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
2 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Dow nt il t k it
ASM DT0B01
M ec hanical d ow nt il t : 0 - 16 °
1.3 k g
1 (Separ at e pack ing)
53
5
6
3
1
s
t
r
o
P
8
2
DX-1695-2690-33-21i-M-R
EasyRET2-Port Antenna with 1 Integrated RCU - 1.4m
Model: A264521R2v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor act ivated, 12V)
< 0.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swi tc hable bet ween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx……y1
y - Yellow
Pattern sample for reference
1695 - 2690 MHz
54
y
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
EasyRET4-Port Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R1v06
Antenna Specifications
Electrical Properties
2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarizat ion
1920 - 2170
2170 - 2200
d
n
a
B
h
g
i
H
+45° , -45°
Electrical downtilt (°)
0 - 10 , cont inuously adjust able, each band separat ely
at mid Tilt
Gain (dBi)
over all Tilt s
Side lobe suppression for first
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
17.6
18.0
18.2
18.1
17.5 ±0.5
17.8 ±0.4
18.0 ±0.4
17.9 ±0.4
>20
> 18
>18
>17
67 ±3
66 ±3
64 ±5
61 ±4
7.4 ±0.4
6.9 ±0.4
6.5 ±0.6
6.0 ±0.3
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 30
Interband isolation (dB)
Front to back ratio,
≥ 30 (1710 - 2200 // 1710 - 2200 MHz)
±30 °(dB)
Cross polar rat io (dB)
0°
>27
> 27
>26
>26
>22
> 22
>21
>18
Max. power per input (W)
300 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1365 x 269 x 86
Packing dimensions (H x W x D) (mm)
1680 x 340 x 155
Antenna weight (kg)
10.6
Clamps weight (kg)
2.9 (2 unit s)
Ant enna packing weight (kg)
106
17.6 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
4
7
2
1
5
6
3
1
Frontal:
540 (at 150 km/h)
Lateral:
75 (at 150 km/ h)
Rear side: 510 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
4 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downt i lt k i t
ASM DT0B01
Mechanical downtilt:
0 - 16 °
1. 3 k g
1 (Sep ar at e p ac ki ng)
55
s
t
r
o
P
8
2
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
EasyRET4-Port Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R1v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 5 (motor act ivated, 12V)
< 0.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 50 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy chain out : Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
Lightning protection (kA)
3 (10/350 s)
10 (8/20 s)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware i nterf ace is swit chable between AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For m ore
details about prot ocol swit ching function, contact Huawei before system installati on.
Standards: UL 60950-1 (Safet y), UL 60950-22 (Safety Equipment inst all ed outdoor), EN 55032 (Emissi on),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part15 , ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx……..bL
HWMxxx…...bbR
L - Left array R - Right array
Pattern sample for reference
1710 - 2200 MHz
(Left)
56
1710 - 2200 MHz
(Right)
bL
bbR
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET4-Port Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R6v06
Antenna Specifications
Electrical Properties
2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
d
n
a
B
h
g
i
H
+45° , -45°
Polarizat ion
Electrical downtilt (°)
0 - 12 , cont inuously adjust able, each band separat ely
at mid Tilt
17.4
17.9
18.2
18.4
17.3 ±0.3
17.7 ±0.4
18.0 ±0.3
18.2 ±0.4
> 18
> 18
> 18
> 18
Horizontal 3dB beam widt h ( °)
66 ±2.7
65 ±2.7
63 ±2.8
61 ±2.6
Vertical 3dB beam widt h (°)
6.9 ±0.3
6.3 ±0.3
5.5 ±0.3
5.0 ±0.3
Gain (dBi)
over all Tilt s
Side lobe suppression for first
side l obe above main beam (dB)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 30
Interband isolation (dB)
Front to back ratio,
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
±30 ° (dB)
> 27
> 27
> 27
> 27
0°
> 20
> 20
> 20
> 20
Cross pol ar rat io (dB)
Max. power per input (W)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1365 x 269 x 86
Packing dimensions (H x W x D) (mm)
1680 x 340 x 155
Antenna weight (kg)
11.8
Clamps weight (kg)
2.9 (2 unit s)
Ant enna packing weight (kg)
18.8 (included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
4
7
2
1
5
6
3
1
Frontal:
540 (at 150 km/ h)
Lateral:
75 (at 150 km/ h)
Rear side: 510 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
4 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0B01
Mechanical downtilt :
0 - 16 °
1. 3 k g
1 (Sep ar at e p ac ki ng)
57
s
t
r
o
P
8
2
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET4-Port Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R6v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
<5 (motor activated, 12V)
< 0.5 (st and by, 12V)
Power consumpt ion (W)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
Lightning protection (kA)
3 (10/350 s)
10 (8/20 s)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swi tc hable bet ween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching functi on, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part 15, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx……..yL
HWMxxx……yyR
yL
y - Yellow
L - Left array
R - Right array
Pattern sample for reference
1710 - 2690 MHz
(Left)
58
1710 - 2690 MHz
(Right)
yyR
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET4-Port Antenna with 2 Integrated RCUs - 2.0m
Model: ADU4521R0v06
Antenna Specifications
Electrical Properties
2 x (1695 - 2690)
Frequency range (MHz)
1695 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
d
n
a
B
h
g
i
H
+45° , -45°
Polarizat ion
Electrical downtilt (°)
0 - 6 , cont inuously adjust able , each band separat ely
at mid Tilt
Gain (dBi)
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
20.0
20.5
20.7
21.0
20.0 ±0.5
20.5 ±0.5
20.7 ±0.5
21.0 ±0.5
> 18
> 17
> 17
> 16
65 ±4
62 ±3
60 ±3
58 ±5
4.4 ±0.4
4.0 ±0.4
3.5 ±0.2
3.3 ±0.3
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
Cross polar rat io (dB)
0°
> 26
> 26
> 26
> 26
> 20
> 20
> 20
> 20
Max. power per input (W)
250 (at 50 ℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical datasheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2099 x 269 x 86
Packing dimensions (H x W x D) (mm)
2415 x 340 x 160
Antenna weight (kg)
16.2
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
26.8 (Included clamps)
Mast diamet er support ed (mm)
50-115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
0
1
3
1
Frontal:
895 (at 150 km/ h)
Lateral:
125 (at 150 km/ h)
Rear side: 840 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
4 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 k g
1 (Sep ar at e p ac ki ng)
59
9
9
0
2
s
t
r
o
P
8
2
DXX-1695-2690/1695-2690-65/65-21i/21i-M/M-R
EasyRET4-Port Antenna with 2 Integrated RCUs - 2.0m
Model: ADU4521R0v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
<5 (motor activated, 12V)
< 0.5 (st and by, 12V)
Power consumpt ion (W)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swi tc hable bet ween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching functi on, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part 15, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx……Ly1
HWMxxx……Ry2
yL1
y - Yellow
L - Left array
Pattern sample for reference
1695 - 2690 MHz
60
R - Right array
Ry2
DXXX-1710-2200/1710-2200/1710-2200-65/65/65-18i/18i/18i-M/M/M-R
EasyRET6-Port Antenna with 3 Integrated RCUs - 1.4m
Model: ATR4518R15v06
Antenna Specifications
Electrical Properties
3 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarizat ion
1920 - 2170
2170 - 2200
d
n
a
B
h
g
i
H
+45° , -45°
Electrical downtilt (°)
0 - 10 , cont inuously adjust able , each band separat ely
at mid Tilt
Gain (dBi)
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
17.4
17.7
17.9
17.9
17.3 ±0.4
17.5 ±0.4
17.7 ±0.4
17.7 ±0.4
> 20
> 18
> 18
> 17
66 ±3
65 ±3
63 ±4
61 ±3
7.4 ±0.4
6.9 ±0.4
6.5 ±0.6
6.0 ±0.3
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 30
Interband isolation (dB)
≥ 28
Front to back ratio,
±30 ° (dB)
Cross polar rat io (dB)
0°
> 25
> 26
> 27
> 27
> 21
> 21
> 20
> 18
Max. power per input (W)
300 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1365 x 376 x 99
Packing dimensions (H x W x D) (mm)
1680 x 440 x 170
Antenna weight (kg)
16.2
Clamps weight (kg)
3.0 (2 unit s)
Ant enna packing weight (kg)
2
6
2
1
25.4 (Included clamps)
Mast diamet er support ed (mm)
5
6
3
1
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
Frontal:
735 (at 150 km/ h)
Lateral:
70 (at 150 km/ h)
Rear side: 690 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
6 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Downtilt kit
Model
Description
ASMDT0C01 Mechanical downtilt : 0 - 16 °
Weight
Units per antenna
2.1 kg
1 (Separate packing)
61
s
t
r
o
P
8
2
DXXX-1710-2200/1710-2200/1710-2200-65/65/65-18i/18i/18i-M/M/M-R
EasyRET6-Port Antenna with 3 Integrated RCUs - 1.4m
Model: ATR4518R15v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
Power c onsumpti on (W)
< 6 (motor act ivated, 12V)
< 1.5 (stand by, 12V)
Adjustment t ime (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy c hain in: Male / Daisy chain out : Female
RET connect or
Pin assignment according AISG
Lightning protect ion (kA)
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swit chable b etween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more detail s
about prot ocol swit ching function, contact Huawei before system installati on.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part 15, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
bL
HWMxxx
bbC
HWMxxx
bbbR
bL
bbC
b Blue
L - Left array
R - Right array C - Center array
Pattern sample for reference
1710 - 2200 MHz
(Left)
62
1710 - 2200 MHz
(Center)
1710 - 2200 MHz
(Right)
bbbR
DXXX-1710-2690/1710-2690/1710-2690-65/65/65-18i/18i/18i-M/M/MR EasyRET6-Port Antenna with Integrated 3RCUs - 1.4m
Model: ATR4518R14v06
Antenna Specifications
Electrical Properties
3 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
d
n
a
B
h
g
i
H
+45° , -45°
Polarizat ion
Electrical downtilt (°)
0 - 12 , cont inuously adjust able, each band separat ely
at mid Tilt
17.6
18.0
18.4
18.6
17.4 ±0.4
17.8 ±0.4
18.1 ±0.4
18.3 ±0.5
> 19
> 22
> 20
> 19
Horizontal 3dB beam widt h ( °)
66 ±5.5
65 ±4.2
64 ±3.8
60 ±3.2
Vertical 3dB beam widt h (°)
6.7 ±0.5
6.1 ±0.3
5.4 ±0.4
5.0 ±0.2
Gain (dBi)
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
VSWR
< 1.5
Cross polar isol ation (dB)
≥ 30
Interband isolation (dB)
≥ 30
Front to back ratio,
±30 ° (dB)
> 27
> 27
> 29
> 29
0°
> 26
> 25
> 23
> 23
Cross pol ar rat io (dB)
Max. power per input (W)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1365 x 376 x 99
Packing dimensions (H x W x D) (mm)
1680 x 440 x 170
Antenna weight (kg)
17.3
Clamps weight (kg)
3.0 (2 unit s)
Ant enna packing weight (kg)
27.0 (included clamps)
Mast diamet er support ed (mm)
2
6
2
1
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
5
6
3
1
Frontal:
735 (at 150 km/ h)
Lateral:
70 (at 150 km/ h)
Rear side: 690 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
6 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Downtilt kit
Model
Description
ASMDT0C01 Mechanical downtilt : 0 - 16 °
Weight
Units per antenna
2.1 kg
1 (Separate packing)
63
s
t
r
o
P
8
2
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R
EasyRET10-Port Antenna with 5 Integrated RCUs - 2.0m
Model: APE4516R1v06
Antenna Specifications
Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803
790 - 862
4 x (1695 - 2690)
824 - 8 94
880 - 960
1920 - 2200
2200 - 2490
2490 - 2690
+45 ° , -45 °
Polarization
Electrical downtilt (°)
0 - 10 , continuously adjustable
at mid Tilt
over al l Ti lt s
Gain (dBi)
1695 - 1990
2 - 12 , continuously adjustable , each band separately
15.4
15.7
16.0
16.1
15.3 ±0.5
15.6 ±0.5
15.8 ±0.5
16.0 ±0.5
at mid Tilt
Bottom
15.8
16.2
16.5
16.7
15.8 ±0.5
16.2 ±0.5
16.5 ±0.4
16.6 ±0.6
15.4
15.8
15.9
16.2
15.3 ±0.5
15.7 ±0.5
15.8 ±0.5
16.0 ±0.6
> 17
> 17
> 17
> 17
> 17
63 ±4.0
61 ±4.0
60 ±4.0
61 ±5.0
Bottom
10.3 ±0.7
9.4 ±0.6
8.1 ±0.5
7.5 ±0.5
Top
9.9 ±0.8
8.9 ±0.6
7.8 ±0.3
7.1 ±0.5
over all Tilts
at mid Tilt
Top
over all Tilts
Side lobe suppression for fi rst side
lobe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam
width (°)
> 17
> 17
> 17
67 ±3.0
67 ±3.0
66 ±3.0
64 ±4.0
10.3 ±0.7
9.3 ±0.5
9.1 ±0.6
8.4 ±0.6
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio, ±30 ° (dB)
Cross polar rat io (dB)
0°
Max. power per input (W)
> 25
> 24
> 24
> 24
> 24
> 26
> 25
> 25
> 18
> 18
> 18
> 17
> 18
> 18
> 18
> 20
500 (at 50 ℃ ambient temperature)
250 (at 50 ℃ ambient temperature)
1000 (at 50 ℃ ambient temperature)
Total power (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2350 x 435 x 250
Antenna weight (kg)
26.5
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
40.0 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational t emperature ( ℃)
- 40 .. +65
Frontal:
705 (at 150 km/h)
Lateral:
230 (at 150 km/h)
Rear side: 730 (at 150 km/ h)
Wind load (N)
Max. operational wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connector
10 x 4.3- 10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 k g
1 (Sep ar at e p ac ki ng)
120
0
1
3
1
9
9
9
1
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-16i/16.5i/16.5i/16i/16i-M/M/M/M/M-R
EasyRET10-Port Antenna with 5 Integrated RCUs - 2.0m
Model: APE4516R1v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
4 x 8 pin connect or accordi ng to IEC 60130-9
Daisy chain in: Male / Daisy c hain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware i nter face is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
RTy3
LTy2
HWMxxx
HWMxxx
HWMxxx
LBy1
r1
RBy4
HWMxxx
r - Red
y - Yellow
L - Left array R - Right array
T - Top array B - Bott om array
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
121
d
n
a
B
H
n
L
1
s
t
r
o
p
2
1
4
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET10-Port Antenna with 5 Integrated RCUs - 2.6m
Model: APE4517R0v06
Antenna Specifications
Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803
790 - 862
4 x (1695 - 2690)
824 - 894
880 - 960
1920 - 2200
2200 - 2490
2490 - 2690
+ 45 ° , -45 °
Polarization
Electrical downtilt (°)
0 - 10 , continuously adjustable , each band separately
at mid Tilt
over al l Til ts
Gain (dBi)
1695 - 1990
16.2
16.5
16.7
17.0
16.1 ±0.5
16.3 ±0.4
16.5 ±0.4
16.8 ±0.4
at mid Tilt
Bottom
over all Tilts
17.1
17.3
17.1
17.6
16.9 ±0.5
17.1 ±0.3
17.0 ±0.4
17.4 ±0.5
16.8
17.1
16.8
17.3
16.7 ±0.5
17.0 ±0.4
16.7 ±0.4
17.1 ±0.5
> 17
> 17
> 17
> 16
at mid Tilt
Top
over all Tilts
Side lobe suppression for fi rst side
lobe above main beam (dB)
> 17
> 17
> 17
> 17
Horizontal 3dB beam widt h ( °)
67 ±1.9
66 ±3.5
65 ±2.4
62 ±3.3
63 ±3.4
62 ±2.8
61 ±3.7
60 ±3.1
Vertical 3dB beam width ( °)
8.8 ±0.6
8.5 ±0.4
8.0 ±0.3
7.4 ±0.3
7.4 ±0.5
6.8 ±0.5
6.0 ±0.4
5.5 ±0.2
VSWR
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 30
Front to back ratio, ±30 ° (dB)
Cross polar ratio (dB)
0°
> 25
> 25
> 25
> 25
> 24
> 24
> 25
> 25
> 20
> 20
> 20
> 20
> 17
> 17
> 17
> 17
500 (at 50 ℃ ambient temperature)
Max. power per input (W)
Total power (W)
250 (at 50 ℃ ambient temperature)
1000 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
106
Mechanical Properties
Antenna di mensions (H x W x D) (mm)
2528 x 349 x 166
Packing di mensions (H x W x D) (mm)
2880 x 415 x 245
Antenna weight (kg)
32.0
Clamps weight (kg)
3.6 (2 units)
Antenna packing weight (kg)
47.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational t emperature ( ℃)
- 40 .. +65
Frontal:
920 (at 150 km/ h)
Lateral:
305 (at 150 km/ h)
Rear side: 955 (at 150 km/ h)
Wind load (N)
Max. operational wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connector
10 x 4.3- 10 Female
Connector position
Bottom
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 k g
1 (Sep ar at e p ac ki ng)
122
5
8
8
1
8
2
5
2
DXXXXX-690-960/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65-17i/18i/18i/17.5i/17.5i-M/M/M/M/M-R
EasyRET10-Port Antenna with 5 Integrated RCUs - 2.6m
Model: APE4517R0v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
4 x 8 pin connect or accordi ng to IEC 60130-9
Daisy chain in: Male / Daisy c hain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware i nter face is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
RTy3
LTy2
HWMxxx
HWMxxx
HWMxxx
LBy1
r1
RBy4
HWMxxx
r - Red
y - Yellow
L - Left array R - Right array
T - Top array B - Bott om array
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
123
d
n
a
B
H
n
L
1
s
t
r
o
p
2
1
4
DXXXXXX-690-960/1427-2690/1695-2690/1695-2690/1695-2690/1695-269065/65/65/65/65/65-17i/17.5i/17.5i/17.5i/17.5i/17.5i-M/M/M/M/M/M-R
EasyRET 1L5H 12-Port Antenna with Integrated RCUs - 2.6m
Model: ASI4518R30v06
Preliminary Issue
Electrical Properties
Frequency range (MHz)
690 - 960
1427 - 2690
4 x (1695 - 2690)
2 - 12
2 - 12
2 - 12
17.0
17.5
17.5
Side lobe suppression for f irst side
lobe above main beam (Typ.) (dB)
17
17
17
Horizontal 3dB beam widt h ( °)
65
65
60
Vertical 3dB beam widt h (°)
8.7
6.5
6.0
Electrical downtilt (°)
Gain (dBi)
VSWR
< 1.5
Front t o back rat io, copolar (dB)
Typ. 26
Typ. 27
Typ. 28
0°
Typ. 18
Typ. 19
Typ. 19
Cross polar rat io (dB)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2769 x 369 x 149
Packing dimensions (H x W x D) (mm)
2965 x 435 x 240
Antenna weight (kg)
42
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
Mast diamet er support ed (mm)
62.8 (Included clamps)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
Wind load (N)
Frontal:
1435 (at 150 km/ h)
Lateral:
285 (at 150 km/ h)
Rear side: 1425 (at 150 km/ h)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
Connect or posit ion
124
12 x 4.3-10 Female
Bot t om
Multi-band
B - 4 2LnH
6 Ports - 2L1H
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
Dimension(mm)
Model
Page
Array
symbol
690-960/
690-960/
1695-2690
65/65/65
14.5/14.5/ 0-14/0-14/
EasyRET2.0 6 x 4.3-10
18
2-12
1499 x 429 x 196
ATR4518R24v06
130
KK
690-960/
690-960/
1695-2690
65/ 65/ 65
16/ 16/ 18
0-10/0-10/
EasyRET2.0 6 x 4.3-10
2-12
1999 x 429 x 196
ATR4518R25v06
132
KK
690-960/
690-960/
1695-2690
65/ 65/ 65
17/ 17/ 18
0-10/0-10/
EasyRET2.0 6 x 4.3-10
2-12
2550 x 429 x 196
ATR4518R26v06
134
KK
690-862/
880-960/
1710-2690
65/65/65
14/14.5/
17.5
0-12/0-12/
EasyRET2.0 6 x 4.3-10
2-12
1490 x 298 x 150
ATR4517R5v06
136
K
790-862/
880-960/
1710-2690
65/ 65/ 65
15.5/ 16/ 18
0-10/0-10/
EasyRET2.0 6 x 4.3-10
0-10
2020 x 298 x 150
ATR4518R2v06
138
K
790-862/
880-960/
1710-2690
65/65/65
16.5/17/18
0-10/0-10/
EasyRET2.0 6 x 4.3-10
0-10
2520 x 298 x 150
ATR4518R12v06
140
K
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
Dimension(mm)
Model
Page
Array
symbol
690-960/
690-960/
1695-2690/
1695-2690
65/65/65/65
1499 x 429 x 196
AQU4518R23v06
142
S
690-960/
690-960/
1695-2690/
1695-2690
65/65/65/65
16/16/
18/18
0-10/0-10/
EasyRET2.0 8 x 4.3-10
2-12/2-12
1999 x 429 x 196
AQU4518R24v06
144
S
690-960/
690-960/
1695-2690/
1695-2690
65/65/65/65
17/17/
18/18
0-10/0-10/
EasyRET2.0 8 x 4.3-10
2-12/2-12
2550 x 429 x 196
AQU4518R25v06
146
S
690-862/
880-960/
1710-2690/
1710-2690
65/65/65/65
14/14.5/ 0-12/0-12/
EasyRET2.0 8 x 4.3-10
17.5/17.5 0-10/0-10
1499 x 359 x 178
AQU4517R4v06
148
R
8 Ports - 2L2H
* * Preliminary Issue
14.5/14.5/ 0-14/0-14/
EasyRET2.0 8 x 4.3-10
18/18
2-12/2-12
d
n
a
B
H
n
L
2
s
t
r
o
P
6
1
6
Multi-band
B - 4 2LnH
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
Dimension(mm)
Page
Array
symbol
690-862/
880-960/
1695-2690/
1695-2690
65/65/65/65
15.5/16/ 0-10/0-10/
EasyRET2.0 8 x 4.3-10
18/18
0-10/0-10
1999 x 349 x 166 * * AQU4518R30v07
150
R
790-862/
880-960/
1710-2690/
1710-2690
65/65/65/65
16.5/17/
18/18
0-10/0-10/
EasyRET2.0 8 x 4.3-10
0-10/0-10
2528 x 349 x 166
AQU4518R4v06
151
R
690-803/
824-960/
1710-2690/
1710-2690
65/65/65/65
14/14.5/ 0-12/0-12/
EasyRET2.0 8 x 4.3-10
17.5/17.5 0-10/0-10
1499 x 359 x 178
AQU4518R19v06
153
R
690-803/
824-960/
1710-2690/
1710-2690
65/65/65/65
0-10/0-10/
EasyRET2.0 8 x 4.3-10
0-10/0-10
2022 x 359 x 178
AQU4518R17v06
155
R
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
Dimension(mm)
Model
Page
Array
symbol
15/16/
18/18
Model
10 Ports - 2L3H
690-960/
690-960/
1427-2690/
1695-2690/
1695-2690
65/65/65/
65/65
0-14/0-14/
14.5/14.5/
2-12/2-12/ EasyRET2.0 10 x 4.3-10 1499 x 469 x 206
17.5/18/18
2-12
APE4518R13v06
157
W4
690-960/
690-960/
1427-2200/
1695-2690/
1695-2690
65/65/65/
65/65
0-10/0-10/
16/16/
2-12/2-12/ EasyRET2.0 10 x 4.3-10 1999 x 469 x 206
17.5/18/18
2-12
APE4518R14v06
160
W4
690-960/
690-960/
1427-2690/
1695-2690/
1695-2690
65/65/65/
65/65
2-12/212/2-12/2- EasyRET2.0 10 x 4.3-10 2550 x 469 x 206
12/2-12
APE4518R30v06
163
WW
790-862/
880-960/
1710-2690/
1710-2170/
2490-2690
65/65/65/
65/65
0-10/0-10/
15.5/16/18
0-10/0-10/ EasyRET2.0 10 x 4.3-10 1999 x 349 x 166
/ 18/ 18
0-10
APE4518R0v06
166
W
790-862/
880-960/
1710-2690/
1710-2170/
2490-2690
65/65/65/
65/65
0-10/0-10/
16.5/17/
0-10/0-10/ EasyRET2.0 10 x 4.3-10 2528 x 349 x 166
18/18/18
0-10
APE4518R1v06
169
W
* * Preliminary Issue
17/17/
17.5/18/
18
Multi-band
B - 4 2LnH
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
Dimension(mm)
Model
Page
Array
symbol
690-862/
880-960/
1427-2200/
1695-2690/
1695-2690
65/65/65/
65/65
2-12/2-12/
15/15.5/
2-12/2-12/ EasyRET2.0 10 x 4.3-10 1999 x 369 x 149
17/18/18
2-12
APE4518R17v06
172
W3
690-862/
880-960/
1710-2690/
1710-2690/
1710-2690
65/65/65/
65/65
16.5/17/
17.5/18/
18
0-10/0-10/
0-10/0-10/ EasyRET2.0 10 x 4.3-10 2769 x 359 x 178
0-10
APE4518R12v06
175
W2
690-803/
824-960/
1710-2690/
1710-2690/
1710-2690
65/65/65/
65/65
16.5/17/
18/18/
17.5
0-10/0-10/
0-10/0-10/ EasyRET2.0 10 x 4.3-10 2769 x 359 x 178
0-10
APE4518R16v06
177
W2
690-803/
824-960/
1427-2200/
1695-2690/
1695-2690
65/65/65/
65/65
2-12/2-12/
15/15.5/
2-12/2-12/ EasyRET2.0 10 x 4.3-10 1999 x 369 x 149
17/18/18
2-12
APE4518R20v06
179
W3
Model
Page
Array
symbol
12 Ports - 2L4H
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
Dimension(mm)
690-960/
690-960/
1427-2690/
1695-2690/
1695-2200/
2490-2690
65/65/65/
65/65/65
14.5/14.5/ 0-14/0-14/
17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 1499 x 469 x 206
17/17.5 2-12/2-12
ASI4518R31v06
182
W5
690-960/
690-960/
1695-2200/
1695-2200/
2490-2690/
2490-2690
65/65/65/
65/65/65
14.5/14.5/ 0-14/0-14/
17/17/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 1499 x 429 x 196
17.5/17.5 2-12/2-12
ASI4518R14v06
185
X3
690-960/
690-960/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/65/
65/65/65
16/16/ 0-10/0-10/
16.5/16.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 1999 x 429 x 196
16.5/16.5 2-12/2-12
ASI4517R3v06
187
Z
* * Preliminary Issue
d
n
a
B
H
n
L
2
s
t
r
o
P
6
1
6
Multi-band
B - 4 2LnH
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
Dimension(mm)
Model
Page
Array
symbol
690-960/
690-960/
1695-2690/
1695-2690/
1695-2690/
1695-2690
65/65/65/
65/65/65
17/17/ 0-10/0-10/
17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 2769 x 429 x 196
17.5/17.5 2-12/2-12
ASI4518R10v06
189
Z
690-960/
690-960/
1427-2690/
1427-2690/
1695-2690/
1695-2690
65/65/65/
65/65/65
14.5/14.5/ 0-14/0-14/
17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 1499 x 469 x 206
17.5/17.5 2-12/2-12
** ASI4518R37v06
191
/
690-960/
690-960/
1427-2690/
1427-2690/
1695-2690/
1695-2690
65/65/65/
65/65/65
15.5/15.5/ 0-10/0-10/
17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 1999 x 469 x 206
17.5/17.5 2-12/2-12
** ASI4518R39v06
192
/
690-862/
880-960/
1710-2690/
1710-2690/
1710-2200/
2490-2690
65/65/65/
65/65/65
14/14.5/ 2-14/2-14/
17.5/17.5/ 2-12/2-12/ EasyRET2.0 12 x 4.3-10 1520 x 369 x 149
17/17.5 2-12/2-12
ASI4518R11v06
193
Y1
690-862/
880-960/
1710-2690/
1710-2690/
1710-2690/
1710-2690
65/65/65/
65/65/65
16.5/17/ 0-10/0-10/
18/18/ 0-10/0-10/ EasyRET2.0 12 x 4.3-10 2769 x 359 x 178
17.5/17.5 0-10/0-10
ASI4518R4v06
196
Y
Model
Page
Array
symbol
** AHP4518R3v06
198
/
0-10/2-12/
2-12/2-12/
EasyRET2.0 14 x 4.3-10 1999 x 469 x 206
2-12/2-12/
2-12
AHP4518R4v06
199
/
17/17/ 2-12/2-12/
17.5/17.5/ 2-12/2-12/
EasyRET2.0 14 x 4.3-10 2769 x 469 x 206
17.5/17.5 2-12/2-12/
/ 17.5
2-12
AHP4518R5v06
202
/
14 Ports - 2L5H
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
690-960/
690-960/
1427-2690/
2*1695-2200/
2*2490-2690
690-960/
690-960/
1427-2690/
2*1695-2200/
2*2490-2690
690-960/
690-960/
1427-2690/
4* 1695-2690
7 x 65
7 x 65
7 x 65
* * Preliminary Issue
Dimension(mm)
14.5/14.5/ 0-14/0-14/
17.5/17/ 2-12/2-12/
EasyRET2.0 14 x 4.3-10 1499 x 469 x 206
17/17.5/ 2-12/2-12/
17.5
2-12
16/16/
17.5/17/
17/17.5/
17.5
Multi-band
B - 4 2LnH
Frequency 3dB Horizontal
Electrical
Gain (dBi )
Tilt Met hod Connect or
Range (MHz) Beam Width (o)
Downtilt (o)
690-862/
880-960/
1427-2690/
2* 1695-2200/
2*2490-2690
690-862/
880-960/
1427-2690/
2*1695-2200/
2*2490-2690
690-862/
880-960/
1427-2690/
4*1695-2690
Dimension(mm)
Model
Page
Array
symbol
7 x 65
14/14.5/
17.5/17/
17/17.5/
17.5
2-16/2-16/
2-12/2-12/
EasyRET2.0 14 x 4.3-10 1499 x 369 x 149
2-12/2-12/
2-12
AHP4517R1v06
205
W6
7 x 65
15/15.5/
17.5/17/
17/17.5/
17.5
2-12/2-12/
2-12/2-12/
EasyRET2.0 14 x 4.3-10 1999 x 369 x 149
2-12/2-12/
2-12
** AHP4517R0v07
208
Z2
7 x 65
16.5/17/ 2-12/2-12/
17.5/17.5/ 2-12/2-12/
EasyRET2.0 14 x 4.3-10 2769 x 369 x 149
17.5/17.5/ 2-12/2-12/
17.5
2-12
AHP4517R2v06
209
Z4
Model
Page
Array
symbol
AOC4518R3v06
212
W7
16 Ports - 2L6H
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
690-862/
880-960/
1427-2690/
5*1695-2690
8 x 65
16.5/17/
17.5/17.5/
17.5/17.5/
17.5/17.5
Dimension(mm)
2-12/2-12/
2-12/2-12/
EasyRET2.0 16 x 4.3-10 2769 x 369 x 149
2-12/2-12/
2-12/2-12
* * Preliminary Issue
Array Symbol Type
Type KK
Type R
Type S
Type W
Type WW
Type W2
Type W3
Type W4
Type W5
LTy1
y1
yL
yyR
Ly1
Ry2
bLyyL
yR
Ly1
Cy2
Ry3
Ly1
LBy2
Lr1
Type K
Rr2
r
rr
Type W6
Lr1
Type W7
LTy2
y
CTy4
rr
r1 r2
r
rr
Lr1
Type X3
r1
r2
Type Y1
Ly1
r1 r2
r1 r2
Type Y
yyyRT
r1 r2
b1
Ry2
Type Z
LTy1
Rr2
Type Z2
RTy3
b1 Ly1 Cy2
Ry3
r
rr
LBy2
RBy4
Lr1
Rr2
Lr1
Rr2
Type Z4
LTy1
Lb1Ly1
yyLB yyyyRB
Rr2
Ly1
Lr1
Cy2 Rb1 Ry3
RBy5
Lr1
Ry2
Ry3
yLT
Lb1 Ly1 Rb2Ry2
CB y3
Rr2
RTy6
Lb1 Ly1Rb2 Cy2 Ry3
LB y1
r
Rr2
b1
Cb2 Rb3Ry2
r1 r2
RTy3
Cy5
LBy2
RBy4
Lr1
Rr2
d
n
a
B
H
n
L
2
s
t
r
o
P
6
1
6
DXXX-690-960/690-960/1695-2690-65/65/65-14.5i/14.5i/18i-M/M/M-R
EasyRET2L1H 6-Port Antenna with 3 Integrated RCUs - 1.4m
Model: ATR4518R24v06
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
1695 - 2690
824 - 894
880 - 960
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
Polarizat ion
0 - 14, continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
13.8
14.2
14.4
2 - 12, continuously adjustable
14.5
13.7 ±0.5 14.1 ±0.5 14.3 ±0.5 14.4 ±0.5
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
17.2
17.4
18.1
16.8 ±0.5
17.1 ±0.5
17.3 ±0.5
17.9 ±0.5
> 15
> 17
> 17
> 16
> 16
> 16
> 16
> 16
66 ±5
63 ±5
62 ±5
60 ±5
65 ±5
63 ±5
60 ±5
60 ±5
15 .3 ±1.2
14 ±1.1
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
17.0
13 .3 ±1.0 12.2 ±0.8
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 22
> 24
> 24
> 25
> 26
> 27
> 27
> 27
0°
> 16
> 18
> 19
> 20
> 15
> 16
> 17
> 18
Cross polar rat io (dB)
Max. power per input (W)
500 (at 50 ℃ ambient t emperat ure)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
720 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carr ier)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical datasheet in XML format is available.
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1499 x 429 x 196
Packing dimensions (H x W x D) (mm)
1695 x 530 x 270
Antenna weight (kg)
25.5
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
36.9 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
Frontal:
670 (at 150 km/ h)
Lateral:
190 (at 150 km/ h)
Rear side: 670 (at 150 km/h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
6 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Dow nt i lt k i t
ASM DT0 D0 1
130
106
Description
M ec hani cal d ow nt i lt : 0 - 16
°
Weight
Units per antenna
2.1 k g
1 ( Separ at e pack ing)
6
7
3
1
9
9
4
1
DXXX-690-960/690-960/1695-2690-65/65/65-14.5i/14.5i/18i-M/M/M-R
EasyRET2L1H 6-Port Antenna with 3 Integrated RCUs - 1.4m
Model: ATR4518R24v06
Integrated RET Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
4 x 8 pin connector according t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS- 485B
n/ c
RS-485A
DC
DC return
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swi tc hable bet ween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed outdoor), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx…….y1
HWMxxx……Lr 1
HWMxxx…...Rr 2
r - Red
y - Yellow
L - Left array R - Right array
y1
Lr1
Rr2
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
131
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXX-690-960/690-960/1695-2690-65/65/65-16i/16i/18i-M/M/M-R
EasyRET2L1H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4518R25v06
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
1695 - 2690
824 - 894
880 - 960
+45° , -45°
Polarizat ion
0 - 10 , continuously adjustable , each band
separately
Electrical downtilt (°)
Gain (dBi)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
at mid Tilt
15.0
14.7 ±0.5
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
15.8
16.0
15.3 ±0.5 15.6 ±0.5 15.8 ±0.5
17.0
17.2
17.7
18.1
16.8 ±0.5
17.1 ±0.5
17.5 ±0.5
17.9 ±0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
68 ±5
65 ±5
62 ±5
60 ±5
65 ±5
63 ±5
61 ±5
60 ±5
10.5 ±0.9
9.5 ±0.8
9.2 ±0.7
8.5 ±0.7
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
15.5
2 - 12, continuously adjustable
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 23
> 25
> 26
> 26
> 26
> 27
> 27
> 28
0°
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
Cross polar rat io (dB)
Max. power per input (W)
500 (at 50 ℃ ambient t emperat ure)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
720 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier )
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2195 x 530 x 270
Antenna weight (kg)
30.5
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
106
44.2 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
Frontal:
910 (at 150 km/ h)
Lateral:
265 (at 150 km/ h)
Rear side: 910 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
6 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0D01
Mechanical downtilt: 0 - 12 °
2.1 kg
1 (Separate packing)
132
3
7
2
1
9
9
9
1
DXXX-690-960/690-960/1695-2690-65/65/65-16i/16i/18i-M/M/M-R
EasyRET2L1H 6-Port Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4518R25v06
Integrated RET Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
4 x 8 pin connector according t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS- 485B
n/ c
RS-485A
DC
DC return
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swi tc hable bet ween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed outdoor), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx…….y1
HWMxxx……Lr 1
HWMxxx…...Rr 2
r - Red
y - Yellow
L - Left array R - Right array
y1
Lr1
Rr2
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
133
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXX-690-960/690-960/1695-2690-65/65/65-17i/17i/18i-M/M/M-R
EasyRET2L1H 6-Port Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4518R26v06
AntennaSpecifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
1695 - 2690
824 - 894
880 - 960
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
Polarizat ion
0 - 10 , continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over al l Ti lt s
15.8
15.5 ±0.5
Side lobe suppression for f irst
side l obe above main beam (dB)
16.7
17
16.3 ±0.5 16.5 ±0.5 16.7 ±0.5
17.0
17.2
17.7
18.1
16.8 ±0.5
17.1 ±0.5
17.5 ±0.5
17.9 ±0.5
> 16
> 17
> 17
> 17
> 16
> 17
> 17
> 16
68 ±5
63 ±5
62 ±5
60 ±5
65 ±5
63 ±5
61 ±5
60 ±5
8.8 ±0.7
8.0 ±0.6
7.8 ±0.5
7.5 ±0.5
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
16.4
2 - 12, continuously adjustable
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 23
> 25
> 26
> 26
> 25
> 26
> 27
> 28
0°
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
Cross polar rat io (dB)
Max. power per input (W)
500 (at 50 ℃ ambient t emperat ure)
Intermodulation IM3 (dBc)
250 (at 50 ℃ ambient temperature)
≤ -153 (2 x 43 dBm carri er)
Impedance (
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2550 x 429 x 196
Packing dimensions (H x W x D) (mm)
2770 x 530 x 275
Antenna weight (kg)
36.5
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
58.0 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
Frontal: 1200 (at 150 km/ h)
Lateral:
345 (at 150 km/ h)
Rear side: 1200 (at 150 km/h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
6 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Dow nt i l t k it
ASM DT0F01
M ec hani cal downt i lt : 0 - 8 °
3.1 kg
1 (Separate packing)
134
106
7
8
7
1
0
5
5
2
DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18i-M/M/M-R
EasyRET6-Port Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4518R2v06
Antenna Specifications
Electrical Properties
Frequency range (MHz)
790 - 862
1710 - 2690
880 - 960
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Polarizat ion
Electrical downtilt (°)
0 - 10 , cont inuously adjust able , each band separat ely
at mid Tilt
Gain (dBi)
over al l Til ts
15.0
15.4
17.8
18.0
18.0
18.0
15.0 ±0.4
15.3 ±0.3
17.5 ±0.5
17.9 ±0.3
17.9 ±0.4
17.8 ±0.5
> 16
> 16
> 16
> 17
> 17
> 16
68 ±2.0
65 ±2.0
61 ±3.0
60 ±3.0
60 ±5.0
61 ±5.0
10.1 ±0.8
9.9 ±0.8
6.0 ±0.4
5.4 ±0.4
4.6 ±0.3
4.3 ±0.3
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
≥ 28 (790 - 862 // 880 - 960 MHz)
≥ 30 (790 - 960 // 1710 - 2690 MHz)
Interband isolation (dB)
Front to back ratio,
±30 ° (dB)
> 26
> 26
> 27
> 27
> 26
> 26
0°
> 18
> 18
> 18
> 18
> 18
> 18
Cross polar ratio (dB)
500 (at 50 ℃ ambient
temperature)
Max. power per i nput (W)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Ant enna dimensions (H x W x D) (mm)
2020 x 298 x 150
Packing dimensions (H x W x D) (mm)
2365 x 360 x 230
Antenna weight (kg)
25.3
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
37.3 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
3
1
9
1
Frontal:
825 (at 150 km/ h)
Lateral:
355 (at 150 km/ h)
Rear side: 990 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
6 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Dow nt i lt ki t
ASM DT0 D01
138
Description
M ec han ic al d ow nt i lt : 0 - 1 2
°
Weight
Units per antenna
2.1 k g
1 (Separ at e pack ing)
0
2
0
2
DXXX-790-862/880-960/1710-2690-65/65/65-15.5i/16i/18i-M/M/M-R
EasyRET6-Port Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4518R2v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (stand by, 12V)
Adjustment t ime (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy c hain in: Male / Daisy chain out : Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protect ion (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The protocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor defi ned command. For more detail s
about protocol swit ching function, contact Huawei before system installati on.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part15 , ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
HWMxxx
HWMxxx
r - Red
y
rr
y - Yellow
r
rr
Pattern sample for reference
790 - 862 MHz
880 - 960 MHz
1710 - 2690 MHz
139
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXX-790-862/880-960/1710-2690-65/65/65-16.5i/17i/18i-M/M/M-R
EasyRET6-Port Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4518R12v06
AntennaSpecifications
Electrical Properties
Frequency range (MHz)
790 - 862
1710 - 2690
880 - 960
1710 - 1990
Polarizat ion
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , cont inuously adjust able, each band separat ely
at mid Tilt
15.9
16.3
17.8
18.0
18.0
18.0
15.8 ±0.4
16.1 ±0.5
17.5 ±0.5
17.8 ±0.4
17.8 ±0.4
17.8 ±0.4
> 16
> 16
> 16
> 17
> 17
> 16
Horizontal 3dB beam widt h ( °)
67 ±2.0
64 ±2.0
61 ±4.0
60 ±4.0
60 ±4.0
61 ±5.0
Vertical 3dB beam widt h (°)
8.5 ±0.7
7.5 ±0.7
6.0 ±0.5
5.4 ±0.4
4.6 ±0.3
4.3 ±0.3
Gain (dBi)
over al l Til ts
Side lobe suppression for f irst
side l obe above main beam (dB)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
≥ 28
≥ 28
≥ 28 (790 - 862 // 880 - 960 MHz)
≥ 30 (790 - 960 // 1710 - 2690 MHz)
Interband isolation (dB)
Front to back ratio,
±30 ° (dB)
> 28
> 28
> 28
> 28
> 28
> 28
0°
> 18
> 18
> 18
> 18
> 18
> 18
Cross polar rat io (dB)
500 (at 50 ℃ ambient
temperature)
Max. power per i nput (W)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2520 x 298 x 150
Packing dimensions (H x W x D) (mm)
2885 x 365 x 235
Antenna weight (kg)
29.0
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
44.0 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
3
1
9
1
Frontal:
1060 (at 150 km/ h)
Lateral:
455 (at 150 km/ h)
Rear side: 1265 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
6 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Dow nt il t ki t
ASM DT0D01
140
Description
M echanical d ow nt il t : 0 - 8
°
Weight
Units per antenna
2.1 k g
1 (Separ at e pack ing)
0
2
5
2
DXXX-790-862/880-960/1710-2690-65/65/65-16.5i/17i/18i-M/M/M-R
EasyRET6-Port Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4518R12v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (stand by, 12V)
Adjustment t ime (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy c hain in: Male / Daisy chain out : Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protect ion (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The protocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor defi ned command. For more detail s
about protocol swit ching function, contact Huawei before system installati on.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part15 , ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
HWMxxx
HWMxxx
r - Red
y
rr
y - Yellow
r
rr
Pattern sample for reference
790 - 862 MHz
880 - 960 MHz
1710 - 2690 MHz
141
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6514.5i/14.5i/18i/18i-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 1.4m
Model: AQU4518R23v06
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
2 x (1695 - 2690)
824 - 894
880 - 960
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
Polarizat ion
0 - 14, continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
13.8
over all Tilts
14.4
14.5
13.7 ±0.5 14.1 ±0.5 14.3 ±0.5 14.4 ±0.5
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
14.2
2 - 12, continuously adjustable, each band
separately
17.0
17.2
17.4
18.1
16.8 ±0.5
17.1 ±0.5
17.3 ±0.5
17.9 ±0.5
> 15
> 17
> 17
> 16
> 16
> 16
> 16
> 16
66 ±5
63 ±5
62 ±5
60 ±5
65 ±5
63 ±5
60 ±5
60 ±5
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
15.3 ±1.2 14.0 ±1.1 13.3 ±1.0 12.2 ±0.8
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 22
> 24
> 24
> 25
> 26
> 27
> 27
> 27
0°
> 16
> 18
> 19
> 20
> 15
> 16
> 17
> 18
Cross polar rat io (dB)
Max. power per input (W)
500 (at 50 ℃ ambient t emperat ure)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
960 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1499 x 429 x 196
Packing dimensions (H x W x D) (mm)
1695 x 530 x 270
Antenna weight (kg)
27.8
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
39.2 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
0
1
3
1
9
9
4
1
Frontal:
670 (at 150 km/ h)
Lateral:
190 (at 150 km/ h)
Rear side: 670 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
8 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Dow nt il t kit
ASM DT0D01
142
106
Description
M echani cal d ow nt il t : 0 - 16
°
Weight
Units per antenna
2.1 kg
1 (Separate packing)
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6514.5i/14.5i/18i/18i-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 1.4m
Model: AQU4518R23v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (stand by, 12V)
Adjustment t ime (full range) (s)
< 65 (typic all y, depending on antenna t ype)
4 x 8 pin connect or accord ing t o IEC 60130-9
Daisy c hain in: Male / Daisy chain out : Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protect ion (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The protocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor defi ned command. For more detail s
about protocol swit ching function, contact Huawei before system installati on.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part15 , ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
HWMxxx
Lr1
Ly1
Ry2
Lr1
Rr2
HWMxxx
HWMxxx
r - Red
y - Yellow
L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
143
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6516i/16i/18i/18i-M/M/M/M-R
EasyRET8-Port Antenna with Integrated RCUs - 2.0m
Model: AQU4518R24v06
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
2 x (1695 - 2690)
824 - 894
880 - 960
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
Polarizat ion
0 - 10 , continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
15.0
over al l Ti lt s
14.7 ±0.5
Side lobe suppression for f irst
side l obe above main beam (dB)
15.8
16.0
15.3 ±0.5 15.6 ±0.5 15.8 ±0.5
17.0
17.2
17.7
18.1
16.8 ±0.5
17.1 ±0.5
17.5 ±0.5
17.9 ±0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
68 ±5
65 ±5
62 ±5
60 ±5
65 ±5
63 ±5
61 ±5
60 ±5
10.5 ±0.9
9.5 ±0.8
9.2 ±0.7
8.5 ±0.7
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
15.5
2 - 12, continuously adjustable, each band
separately
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 23
> 25
> 26
> 26
> 26
> 27
> 27
> 28
0°
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
Cross polar rat io (dB)
Max. power per input (W)
500 (at 50 ℃ ambient t emperat ure)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
960 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Ant enna dimensions (H x W x D) (mm)
1999 x 429 x 196
Packing dimensions (H x W x D) (mm)
2195 x 530 x 270
Antenna weight (kg)
32.2
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
45.9 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
3
7
2
1
Frontal:
910 (at 150 km/ h)
Lateral:
265 (at 150 km/ h)
Rear side: 910 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
8 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Dow nt i lt ki t
ASM DT0D0 1
144
Description
M ech an ic al dow nt i lt : 0 - 1 2
°
Weight
Units per antenna
2.1 k g
1 ( Separ at e pack ing)
9
9
9
1
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6516i/16i/18i/18i-M/M/M/M-R
EasyRET8-Port Antenna with Integrated RCUs - 2.0m
Model: AQU4518R24v06
Integrated RET Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
4 x 8 pin connector according t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS- 485B
n/ c
RS-485A
DC
DC return
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The protocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor def ined command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
HWMxxx
Lr 1
HWMxxx
r2
Ly1
Ry2
Lr1
Rr2
HWMxxx
r - Red
y - Yellow
L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
145
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/18i/18i-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 2.6m
Model: AQU4518R25v06
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
2 x (1695 - 2690)
824 - 894
1695 1990
880 - 960
Polarizat ion
1920 2200
2200 2490
2490 2690
+45° , -45°
0 - 10, continuously adjustable, each band
separately
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
over al l Ti lt s
15.8
15.5 ±0.5
Side lobe suppression for f irst
side l obe above main beam (dB)
16.7
17.0
16.3 ±0.5 16.5 ±0.5 16.7 ±0.5
17.0
17.2
17.7
18.1
16.8 ±0.5
17.1 ±0.5
17.5 ±0.5
17.9 ±0.5
> 16
> 17
> 17
> 17
> 16
> 16
> 16
> 16
68 ±5
65 ±5
60 ±5
58 ±5
65 ±5
63 ±5
61 ±5
60 ±5
8.8 ±0.7
8.0 ±0.6
7.8 ±0.5
7.5 ±0.5
6.8 ±0.7
5.8 ±0.5
5.3 ±0.4
5.0 ±0.5
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
16.4
2 - 12, continuously adjustable, each band
separately
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 25
> 26
> 26
> 26
> 26
> 27
> 27
> 28
0°
> 17
> 18
> 19
> 20
> 15
> 16
> 17
> 17
Cross polar rat io (dB)
Max. power per input (W)
500 (at 50 ℃ ambient t emperat ure)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
960 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical datasheet in XML format is available.
Mechanical Properties
106
Ant enna dimensions (H x W x D) (mm)
2550 x 429 x 196
Packing dimensions (H x W x D) (mm)
2770 x 530 x 275
Antenna weight (kg)
37.4
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
58.9 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
Frontal:
1200 (at 150 km/ h)
Lateral:
345 (at 150 km/ h)
Rear side: 1200 (at 150 km/h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
8 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt:
0- 8°
3. 1 k g
1 (Sep ar at e p ac ki ng)
146
7
8
7
1
0
5
5
2
DXXXX-690-960/690-960/1695-2690/1695-2690-65/65/65/6517i/17i/18i/18i-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 2.6m
Model: AQU4518R25v06
Integrated RET Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s)
< 65 (typically, depending on antenna type)
4 x 8 pin connector according t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connector
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS- 485B
n/ c
RS-485A
DC
DC return
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The protocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor def ined command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
HWMxxx
Lr 1
HWMxxx
r2
Ly1
Ry2
Lr1
Rr2
HWMxxx
r - Red
y - Yellow
L - Left array R - Right array
Pattern sample for reference
690 - 960 MHz
1695 - 2690 MHz
147
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i/-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 1.4m
Model: AQU4517R4v06
Antenna Specifications
Electrical Properties
690 - 862
Frequency range (MHz)
690 - 803
2 x (1710 - 2690)
880 - 960
790 - 862
1710 - 1990
Polarizat ion
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
0 - 12 , conti nuously adjustable,
each band separatel y
Electrical downtilt (°)
at mid Tilt
0 - 10 , continuously adjustable, each band separately
13.8
13.9
14.2
17.4
17.8
18.2
18.3
14.0 ±0.5
14.1 ±0.3
14.3 ±0.3
17.3 ±0.5
17.7 ±0.5
18.1 ±0.5
18.2 ±0.4
Side lobe suppression for f irst
side l obe above main beam (dB)
> 16
> 16
> 15
> 18
> 18
> 18
> 18
Horizontal 3dB beam widt h ( °)
66 ±1.7
64 ±2.6
64 ±3.5
65 ±3.9
63 ±3.3
62 ±4.8
60 ±4.5
15.2 ±2.3
13.3 ±1.8
11.8 ±2.0
7.1 ±0.6
6.5 ±0.5
5.8 ±0.5
5.2 ±0.3
Gain (dBi)
over all Tilt s
Vertical 3dB beam widt h (°)
VSWR
< 1.5
Cross polar isol ation (dB)
≥ 28
≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz)
≥ 30 (690 - 862 // 1710 - 2690 MHz)
≥ 30 (880 - 960 // 1710 - 2690 MHz)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Interband isolation (dB)
Front to back ratio,
±30 °
Cross polar ratio (dB)
≥ 28
(dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 30
> 28
> 28
> 28
> 18
> 20
> 20
> 19
> 19
> 20
> 20
300 (at 50 ℃ ambient t emperat ure)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
700 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
Mechanical Properties
106
Ant enna dimensions (H x W x D) (mm)
1499 x 359 x 178
Packing dimensions (H x W x D) (mm)
1880 x 425 x 255
Antenna net weight (kg)
26.5
Bracket weight (kg)
3.6 (2 unit s)
Packing weight (kg)
40.3 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
Frontal:
Lateral:
Rear side:
Wind load (N)
200
Survival wind speed (km/ h)
250
Connect or
9
9
4
1
670 (at 150 km/ h)
180 (at 150 km/ h)
560 (at 150 km/ h)
Max. operat ional wind speed (km/ h)
8 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Dow nt i lt k it
ASM DT0D0 1
M ec han ic al d ow nt i lt : 0 - 1 6 °
2 .1 k g
1 (Sep ar at e p ac ki ng)
148
7
4
3
1
DXXXX-690-862/880-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i/-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 1.4m
Model: AQU4517R4v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna type)
4 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain i n: Male / Daisy chain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/3GPP and AISG 1.1 wit h a vendor def ined command. For more
details about prot ocol swit ching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part15 , ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
yL
HWMxxx
HWMxxx
rr
yL
yyR
HWMxxx...yyR
r - Red
L - Left array
y - Yellow
R - Right array
r
rr
Pattern sample for reference
690 - 862 MHz
880 - 960 MHz
1710 - 2690 MHz
149
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXXX- 690-862/880-960/1695-2690/1695-2690-65/65/65/6515.5i/16i/18i/18i-M/M/M/M-R
EasyRET2L2H 8-Port Antenna with Integrated RCUs - 2.0m
Model: AQU4518R30v07
Preliminary Issue
Electrical Properties
Frequency range (MHz)
690 - 862
880 - 960
2 x (1695 - 2690)
Electrical downtilt (°)
0 - 10
0 - 10
0 - 10
Gain (dBi)
15.0
15.5
18.0
Side lobe suppression for first
side lobe above main beam (Typ.)
(dB)
16
16
16
Horizontal 3dB beam widt h ( °)
67
65
65
Vertical 3dB beam widt h (°)
10
8.6
6.5
VSWR
< 1.5
Front t o back rat io, copolar (dB)
Cross polar rat io (dB)
Typ. 25
Typ. 25
Typ. 25
Typ. 17
Typ. 17
Typ. 17
≤ -150 (2 x 43 dBm carri er)
≤ -150 (2 x 43 dBm carri er)
≤ -153 (2 x 43 dBm carri er)
0°
Intermodulation IM3 (dBc)
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1999 x 349 x 166
Packing dimensions (H x W x D) (mm)
2350 x 415 x 240
Antenna net weight (kg)
26.5
Mechanical downtil t (°)
0 - 12
Connect or
150
8 x 4.3-10 Female
DXXXX-790-862/880-960/1710-2690/1710-2690-65/65/65/6516.5i/17i/18i/18i-M/M/M/M-R
EasyRET8-Port Antenna with 4Integrated RCUs-2.6m
Model: AQU4518R4v06
Antenna Specifications
Electrical Properties
Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
880 - 960
1710 - 1990
1920 - 2200
2200 - 2490
2490 - 2690
+45° , -45°
Polarizat ion
Electrical downtilt (°)
0 - 10 , cont inuously adjust able, each band separat ely
at mid Tilt
16.2
16.7
17.3
17.8
18.0
18.2
16.1 ±0.5
16.5 ±0.4
17.2 ±0.5
17.6 ±0.4
17.8 ±0.4
18.1 ±0.5
> 16
> 16
> 16
> 17
> 17
> 17
Horizontal 3dB beam widt h ( °)
65 ±2.2
62 ±2.5
65 ±5.0
62 ±3.5
60 ±3.5
60 ±4.0
Vertical 3dB beam widt h (°)
8.6 ±0.7
7.6 ±0.6
5.8 ±0.4
5.4 ±0.4
4.8 ±0.2
4.3 ±0.2
Gain (dBi)
over all Tilt s
Side lobe suppression for first
side l obe above main beam (dB)
VSWR
< 1.5
Cross polar isol ation (dB)
≥ 28
≥ 28
≥ 28 (790 - 862 // 880 - 960 MHz)
≥ 30 (790 - 862 // 1710 - 2690 MHz)
≥ 30 (880 - 960 // 1710 - 2690 MHz)
Interband isolation (dB)
Front to back ratio,
±30 ° (dB)
Cr oss pol ar rat io (dB)
d
n
a
B
H
n
L
2
≥ 28
0°
> 24
> 24
> 25
> 25
> 25
> 25
> 18
> 18
> 18
> 18
>18
> 18
500 (at 50 ℃ ambient
temperature)
Max. power per i nput (W)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
1000 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Elect rical dat asheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2528 x 349 x 166
Packing dimensions (H x W x D) (mm)
2885 x 420 x 245
Antenna weight (kg)
33.4
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
48.7 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
7
2
8
1
8
2
5
2
Frontal:
920 (at 150 km/ h)
Lateral:
305 (at 150 km/ h)
Rear side: 955 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
8 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Dow nt i lt k i t
ASM DT0 D0 1
Description
M ec hani cal d ow nt i lt : 0 - 8
°
Weight
Units per antenna
2.1 k g
1 (Separ at e pack ing)
151
s
t
r
o
p
6
1
6
DXXXX-790-862/880-960/1710-2690/1710-2690-65/65/65/6516.5i/17i/18i/18i-M/M/M/M-R
EasyRET8-Port Antenna with 4Integrated RCUs-2.6m
Model: AQU4518R4v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
4 x 8 pin connector according t o IEC 60130-9
Daisy chain i n: Male / Daisy chain out : Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor defi ned command. For mor e
details about protocol switching funct ion, contact Huawei before system install ation.
Standards: UL 60950-1 (Safet y), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
HWMxxx
rr
HWMxxx
yL
yL
yyR
HWMxxx...yyR
r - Red
L - Left array
y - Yellow
R - Right array
r
Pattern sample for reference
790 - 862 MHz
152
880 - 960 MHz
1710 - 2690 MHz
rr
DXXXX-690-803/824-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 1.4m
Model: AQU4518R19v06
Antenna Specifications
Electrical Properties
Frequency range (MHz)
690 - 803
824 - 960
824 - 894
2 x (1710 - 2690)
880 - 960
Polarizat ion
1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
0 - 12 , continuously adjustable , each
band separately
Electrical downtilt (°)
at mid Tilt
0 - 10 , continuously adjustable , each band
separately
13.8
13.9
14.2
17.4
17.8
18.2
18.3
14. 0 ±0.5
14.1 ±0.3
14.3 ±0.3
17.3 ±0.5
17.7 ±0.5
18.1 ±0.5
18.2 ±0.4
Side lobe suppression for f irst
side l obe above main beam (dB)
> 16
> 16
> 15
> 18
> 18
> 18
> 18
Horizontal 3dB beam widt h ( °)
66 ±1.7
65 ±2.3
64 ±3.5
65 ±3.9
63 ±3.3
62 ±4.8
60 ±4.5
15.2 ±2.3
12.8 ±2.0
11.8 ±2.0
7.1 ±0.6
6.5 ±0.5
5.8 ±0.5
5.2 ±0.3
Gain (dBi)
over al l Ti l ts
Vertical 3dB beam widt h (°)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
≥ 28
d
n
a
B
H
n
L
2
≥ 28
≥ 28 (690 - 803 // 824 - 960 MHz)
≥ 30 (690 - 803 // 1710 - 2690 MHz)
≥ 30 (824 - 960 // 1710 - 2690 MHz)
Interband isolation (dB)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio,
±30 ° (dB)
Cross pol ar rat io (dB)
0°
Max. power per input (W)
> 25
> 25
> 25
> 30
> 28
> 28
> 28
> 18
> 18
> 20
> 19
> 19
> 20
> 20
300 (at 50 ℃ ambient t emperat ure)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
700 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1499 x 359 x 178
Packing dimensions (H x W x D) (mm)
1880 x 425 x 250
Antenna weight (kg)
27.4
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
41.1 (included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
7
4
3
1
9
9
4
1
Frontal:
670 (at 150 km/h)
Lateral:
180 (at 150 km/ h)
Rear side: 560 (at 150 km/h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
8 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Downtilt kit
ASMDT0D01
Description
Mechanical downtilt: 0 - 16
°
Weight
Units per antenna
2.1 k g
1 (Separ at e pack ing)
153
s
t
r
o
p
6
1
6
DXXXX-690-803/824-960/1710-2690/1710-2690-65/65/65/6514i/14.5i/17.5i/17.5i-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 1.4m
Model: AQU4518R19v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
4 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swit chable between AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
yL
HWMxxx
HWMxxx
yL
rr
yyR
HWMxxx yyR
r - Red
L - Left array
y - Yellow
R - Right array
r
Pattern sample for reference
690 - 803 MHz
154
824 - 960 MHz
1710 - 2690 MHz
rr
DXXXX-690-803/824-960/1710-2690/1710-2690/-65/65/65/6515i/16i/18i/18i/-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 2.0m
Model: AQU4518R17v06
AntennaSpecifications
Electrical Properties
Frequency range (MHz)
824 - 960
690 - 803
824 - 894
2 x (1710 - 2690)
880 - 960
1710 - 1990
Polarizat ion
1920 - 2200
2200 - 2490 2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10 , cont inuously adjust able , each band separat ely
at mid t ilt
14.7
15.1
15.4
17.2
17.5
17.8
17.9
14.8 ±0.5
15.1 ±0.5
15.4 ±0.3
17.1 ±0.4
17.4 ±0.5
17.8 ±0.5
17.9 ±0.4
Side lobe suppression for f irst
side l obe above main beam (dB)
> 18
> 18
> 18
> 18
> 17
> 17
> 17
Horizontal 3dB beam widt h ( °)
67 ±3.0
63 ±2.7
63 ±3.0
66 ±3.9
64 ±3.3
63 ±4.8
60 ±4.5
12.0 ±1.0
10.1 ±0.9
9.4 ±0.8
6.3 ±0.5
5.7 ±0.4
5.1 ±0.5
4.7 ±0.2
Gain (dBi)
over al l t il ts
Vertical 3dB beam widt h (°)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
≥ 28
≥ 28
d
n
a
B
H
n
L
2
≥ 28 (690 - 803 // 824 - 960 MHz)
≥ 30 (690 - 803 // 1710 - 2690 MHz)
≥ 30 (824 - 960 // 1710 - 2690 MHz)
Interband isolation (dB)
≥ 30 (1710 - 2690 // 1710 - 2690 MHz)
Front to back ratio,
±30 ° (dB)
Cross polar rat io (dB)
0°
Max. power per input (W)
> 27
> 25
> 27
> 30
> 29
> 27
> 26
> 16
> 19
> 19
> 18
> 18
> 18
> 18
360 (at 50 ℃ ambient t emperat ure)
Tot al power (W)
250 (at 50 ℃ ambient temperature)
700 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2022 x 359 x 178
Packing dimensions (H x W x D) (mm)
2400 x 430 x 255
Antenna weight (kg)
32.1
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
46.8 (included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
8
1
9
1
2
2
0
2
Frontal:
930 (at 150 km/h)
Lateral:
255 (at 150 km/ h)
Rear side: 755 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
8 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Downtilt kit
Model
Description
ASMDT0D01 Mechanical downtilt: 0 - 12
°
Weight
Units per antenna
2.1 k g
1 (Separ at e pack ing)
155
s
t
r
o
p
6
1
6
DXXXX-690-803/824-960/1710-2690/1710-2690/-65/65/65/6515i/16i/18i/18i/-M/M/M/M-R
EasyRET8-Port Antenna with 4 Integrated RCUs - 2.0m
Model: AQU4518R17v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
4 x 8 pin connect or accordi ng to IEC 60130-9
Daisy chain in: Male / Daisy c hain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For m ore
details about prot ocol swit ching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part 15, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
yL
HWMxxx
HWMxxx
yL
rr
yyR
HWMxxx...yyR
r - Red
L - Left array
y - Yellow
R - Right array
r
Pattern sample for reference
690 - 803 MHz
156
824 - 960 MHz
1710 - 2690 MHz
rr
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Model: APE4518R13v06
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45 ° , -45 °
+45 ° , -45 °
0 - 14 , continuously adjustable , each
band separately
2 - 12 , continuously adjustable
Polarizat ion
Electrical downtilt ( °)
at mid Tilt
Gain (dBi)
1427 - 2690
13.7
over all Tilt s
Side lobe suppression for first
side lobe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h ( °)
14.3
14.6
14.8
13.6 ±0.5 14.2 ±0.5 14.5 ±0.5 14.7 ±0.5
16.2
17.4
17.8
16.1 ±0.5
17.3 ±0.5
17.7 ±0.5
18.0 ±0.5
18.0 ±0.5
> 17
> 17
> 17
> 15
> 16
> 16
> 17
> 17
70 ±5
70 ±4
69 ±4
65 ±4
62 ±7
61 ±7
60 ±6
58 ±5
58 ±5
7.9 ±0.5
6.4 ±0.5
5.8 ±0.5
5.1 ±0.3
4.7 ±0.3
15 .4 ±1.5 13.8
±0.9 13
.3
±0.7 12.1 ±0.7
< 1.5
< 1.5
Cross polar isol ation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
±30 ° (dB)
0°
Cross polar rat io (dB)
Max. power per input (W)
Intermodulation IM3 (dBc)
18.1
> 15
VSWR
Front to back rati o ,
18.1
> 22
> 23
> 24
> 24
> 25
> 28
> 28
> 28
> 26
> 18
> 20
> 23
> 23
> 15
> 18
> 18
> 16
> 15
500 (at 50 ℃ ambient temperature)*
300 (at 50 ℃ ambient temperature) *
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690)
Frequency range (MHz)
1695 - 1990
1920 - 2200
2490 - 2690
+45° , -45°
Polarizat ion
Electrical downtilt (°)
Gain (dBi)
2200 - 2490
2 - 12 , cont inuously adjust able , each band separat ely
at mid Tilt
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
17.4
17.8
18.0
18.0
17.3 ±0.5
17.7 ±0.5
17.9 ±0.5
17.9 ±0.5
> 15
> 17
> 17
> 17
62 ±6
60 ±6
58 ±5
58 ±4
6.5 ±0.5
5.6 ±0.3
5.2 ±0.2
4.7 ±0.3
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
Cross polar rat io (dB)
0°
> 26
> 26
> 26
> 26
> 19
> 19
> 20
> 17
Max. power per input (W)
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
250 (at 50 ℃ ambient temperature)*
≤ -153 (2 x 43 dBm carri er)
50
DC Ground
* Total power : 700 W (at 50 ℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
157
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Model: APE4518R13v06
Mechanical Properties
106
Ant enna dimensions (H x W x D) (mm)
1499 x 469 x 206
Packing dimensions (H x W x D) (mm)
1870 x 535 x 285
Antenna weight (kg)
33.1
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
50.4 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
3
8
3
1
Frontal:
700 (at 150 km/h)
Lateral:
195 (at 150 km/ h)
Rear side: 670 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
10 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Downt il t ki t
ASM DT0F01
Description
M echani cal downt il t: 0 - 16
°
Weight
Units per antenna
3.1 k g
1 (Separ at e pack ing)
Pattern sample for reference
690 - 960 MHz
158
1427 - 2690 MHz
1695 - 2690 MHz
9
9
4
1
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-14.5i/14.5i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET2L3H 10-Port Antenna with 5 Integrated RCUs - 1.4m
Model: APE4518R13v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when t he motor does not work, 12 V)
< 4.5 (when t he motor is worki ng, 12 V)
< 10 (when the mot or is st art ing up or shutt ing down, 12 V)
Adjustment t ime (full range) (s)
Typ. 40 (typic all y, depending on antenna type)
RET connect or
4 x 8 pin connector according t o IEC 60130-9
Daisy chain i n: Male / Daisy chain out: Female
Pin assignment according AISG
Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
2.5 (10/350 s)
10 (8/20 s)s)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor defi ned command. For mor e
details about protocol switching funct ion, contact Huawei before system install ation.
Standards: UL 60950-1 (Safet y), UL 60950-22 (Safety - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
r1
HWMxxx
Ly1
HWMxxx
Cy2
Ly1
Cy2
Ry3
HWMxxx
HWMxxx
Rr 2
Lr1
Rr2
r - Red
y - Yellow
L - Left array C - Center array
R - Right array
159
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET10-Port Antenna with 5 Integrated RCUs - 2.0m
Model: APE4518R14v06
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
Gain (dBi)
at mid Tilt
over al l Ti lt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
824 - 894
880 - 960
1427 - 1518 1695 - 1990 1920 - 2200
+45° , -45°
+45 ° , -45°
0 - 10 , continuously adjustable , each band
separately
2 - 12 , continuously adjustable
Polarizat ion
Electrical downtilt (°)
1427 - 2200
14.8
15.4
15.7
16.0
16.0
17.3
17.4
14.7 ±0.4
15.3 ±0.4
15.5 ±0.3
15.8 ±0.4
15.8 ±0.6
17.2 ±0.4
17.3 ±0.5
> 17
> 17
> 17
> 17
> 15
> 16
> 16
70 ±5
69 ±4
68 ±3
64 ±4
63 ±7
64 ±7
65 ±6
11.0 ±0.8
9.8 ±0.5
9.5 ±0.5
8.8 ±0.5
7.9 ±0.3
6.3 ±0.5
5.8 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isol ati on (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio ,
±30 °
(dB)
> 24
> 25
> 25
> 25
> 25
> 27
> 27
0°
> 20
> 20
> 20
> 21
> 16
> 18
> 18
Cross polar rat io (dB)
Max. power per input (W)
500 (at 50 ℃ ambient temperature)*
300 (at 50 ℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carri er)
Intermodulation IM3 (dBc)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Electrical downtilt (°)
2 - 12 , cont inuously adjust able , each band separat ely
at mid Tilt
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
17.0
17.5
17.6
18.0
16.9 ±0.6
17.4 ±0.5
17.5 ±0.5
17.9 ±0.5
> 18
> 19
> 19
> 18
63 ±6
61 ±6
60 ±6
60 ±6
7.4 ±0.7
6.6 ±0.6
5.8 ±0.3
5.3 ±0.3
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
Cross polar rat io (dB)
0°
> 25
> 27
> 27
> 27
> 18
> 18
> 17
> 18
Max. power per input (W)
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
250 (at 50 ℃ ambient temperature)*
≤ -153 (2 x 43 dBm carri er)
50
DC Ground
* Tot al power : 700 W (at 50 ℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
160
2490 - 2690
+45° , -45°
Polarizat ion
Gain (dBi)
2200 - 2490
DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET10-Port Antenna with 5 Integrated RCUs - 2.0m
Model: APE4518R14v06
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
1999 x 469 x 206
Packing dimensions (H x W x D) (mm)
2255 x 535 x 285
Antenna weight (kg)
38.9
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
60.0 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature
144
( ℃)
0
2
4
1
-40 .. +65
Frontal:
955 (at 150 km/ h)
Lateral:
270 (at 150 km/ h)
Rear side: 910 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
d
n
a
B
H
n
L
2
10 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Downt il t k it
ASM DT0F01
Description
M echani cal downt il t: 0 - 12
°
Weight
Units per antenna
3.1 k g
1 (Separ at e pack ing)
Pattern sample for reference
690 - 960 MHz
1427 - 2200 MHz
9
9
9
1
1695 - 2690 MHz
161
s
t
r
o
p
6
1
6
DXXXXX-690-960/690-960/1427-2200/1695-2690/1695-269065/65/65/65/65-16i/16i/17.5i/18i/18i-M/M/M/M/M-R
EasyRET10-Port Antenna with 5 Integrated RCUs - 2.0m
Model: APE4518R14v06
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
4 x 8 pin connector according t o IEC 60130-9
Daisy chain i n: Male / Daisy chain out : Female
RET connect or
Pin assignment according AISG
Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati ble wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware int erface is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor defi ned command. For mor e
details about protocol switching funct ion, contact Huawei before system install ation.
Standards: UL 60950-1 (Safet y), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part1 5, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
r1
HWMxxx
Ly1
HWMxxx
b1
Ly1
b1
Ry2
HWMxxx
HWMxxx
Rr 2
r - Red
y Yellow
b - Blue
L - Left array R - Right array
162
Lr1
Rr2
DXXXXX-690-960/690-960/1427-2690/1695-2690/1695-269065/65/65/65/65-17i/17i/17.5i/18i/18i-M/M/M/M/M/M-R
EasyRET10-Port Antenna with 5 Integrated RCUs - 2.6m
Model: APE4518R30v06
APE4518R30v06
Antenna Specifications
Electrical Properties
2 x (690 - 960)
Frequency range (MHz)
690 - 803
790 - 862
at mid Tilt
Gain (dBi)
824 - 894
880 - 960 1427 - 1518 1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
+45° , -45°
+4 5° , -45°
2 - 12 , continuously adjustable , each
band separately
2 - 12 , conti nuously adjustable
Polarizat ion
Electrical downtilt (°)
1427 - 2690
15.8
16.4
16.7
17.0
16.2
17.3
17.4
17.9
18.0
over all Tilt s 15.6 ±0.5 16.3 ±0.5 16.5 ±0.5 16.7 ±0.5 16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5
Side lobe suppression for first
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam width (°)
>15
>15
>16
>16
> 15
> 16
> 16
> 17
> 17
70 ±5
69 ±4
68 ±3
64 ±4
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
9.0 ±0.5
8.0 ±0.4
7.7 ±0.5
7.2 ±0.4
7.9 ±0.4
6.6 ±0.4
5.8 ±0.3
5.2 ±0.3
4.8 ±0.2
VSWR
< 1.5
< 1.5
Cross polar isol ati on (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front to back ratio ,
±30 °
(dB)
> 22
> 24
> 24
> 25
> 25
> 28
> 28
> 28
> 28
0°
> 20
> 24
> 24
> 24
> 15
> 18
> 16
> 16
> 15
Cross polar rat io (dB)
Max. power per input (W)
Intermodulation IM3 (dBc)
500 (at 50 ℃ ambient temperature)*
250 (at 50 ℃ ambient temperature)*
≤ -153 (2 x 43 dBm carri er)
≤ -153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
2 x (1695 - 2690)
Frequency range (MHz)
1695 - 1990
1920 - 2200
2490 - 2690
+45° , -45°
Polarizat ion
Electrical downtilt (°)
2 - 12 , cont inuously adjust able , each band separat ely
at mid Tilt
Gain (dBi)
2200 - 2490
over all Tilt s
Side lobe suppression for first
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam width (°)
17.0
17.5
17.6
18.0
16.9 ±0.6
17.4 ±0.5
17.5 ±0.5
17.9 ±0.5
> 16
> 16
> 18
> 17
62 ±5
60 ±5
58 ±4
58 ±4
6.5 ±0.5
5.6 ±0.4
5.2 ±0.2
4.8 ±0.3
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front to back ratio ,
±30 °
(dB)
> 27
> 27
> 27
> 27
0°
> 22
> 20
> 19
> 18
Cross polar rat io (dB)
Max. power per input (W)
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
250 (at 50 ℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier )
50
DC Ground
* Tot al power : 700 W (at 50 ℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
163
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
D7X- 69
6900-86
862/
2/880
880-- 960
960//142
14277-269
2690/
0/2x(
2x(16
169595-220
2200)/2x(2
0)/2x(2490
490-- 269
2690)0)-7x6
7x65515i/
15
i/15
15.5i/17.5
.5i/17.5i/
i/17
17i/
i/17
17i/
i/17
17.5i/17.5
.5i/17.5ii-7x
7xMM-R
R
EasyRET2L5H
EasyRET
2L5H 1212-Port
Port Anten
Antenna
na with Integrated
Integrated RCUs
RCUs - 2.0
2.0m
m
Model: AHP4517R0
AHP4517R0v07
v07
Preliminary Issue
Electrical
Electrical Properties
Properties
Fr eq uenc y r ange (M Hz)
690 - 86
862
880 - 96
960
1427 - 26
2 690
2 - 12
2 - 12
2 - 12
2 - 12
2 - 12
15.0
15. 5
17. 5
17.0
17.5
Side lobe suppressio
suppression
n for f irst side
lobe
lob e above main beam (Typ.) (dB)
16
16
17
17
17
Horizontal
Horizontal 3dB beam
beam widt h ( °)
67
61
65
65
60
10.4
9.0
6.5
6.5
5.0
Electric
lectrica
al do
down
wntilt
tilt (°)
Gai n (d Bi )
Vertical 3dB beam
beam widt h (°)
VSWR
2 x (1695 - 22
2 200) 2 x (2490 - 26
2690)
< 1.5
Fr ont t o b ac k r at i o, c op ol ar (d B)
Typ . 26
Typ . 26
Typ . 26
Typ . 26
Typ . 26
0°
Typ . 18
Typ . 18
Typ . 19
Typ . 19
Typ . 19
Cr oss p ol ar r at i o (d B)
Intermodu
Intermodulation
lation IM3 (dBc)
(dBc)
43 dBm carri er)
≤ -150 (2 x 43
Mechanical Properties
Ant enna d i m ensi ons (H x W x D) (mm )
1999 x 369 x 149
Pac k i ng d i mensi ons (H x W x D) (mm )
2265 x 435 x 240
Antenna net weight (kg)
37
Mecha
Mechanica
nicall downtil
downtil t (°)
0 - 12
Connec t or
14 x 4.3- 10 Fem al e
RET t yp e
Int egr at ed RET
RET p r ot oc ol s
AISG 2.0 / 3GPP
208
D7X
7X-- 69
6900-86
862/
2/880
880-- 96
960/
0/142
14277-269
2690/
0/4x(
4x(169
16955-26
2690)
90)-- 7x6
7x65516.5
16
.5i/
i/17
17i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i.5i-7x
7xMM-R
R
EasyRET2L5H
EasyRET
2L5H 1414-Port
Port Antenn
Antenna
a with
with 7 Integrated
Integrated RCUs - 2.6m
Model: AHP4517R2
AHP4517R2v06
v06
Antenna Specifications
Electrical
Electrical Properties
Properties
690 - 862 (r1)
(r1)
Frequency range (MHz)
690 - 80
8 03
+ 45° , -45°
+45 ° , -45 °
2 - 12, continuously
continuously adjustable ,
each band separately
2 - 12 , continuously
continuously adjustable
Pol ar i zat i on
Electric
lectrica
al do
down
wntilt
tilt (°)
at m i d Ti l t
Gain (dBi)
790 - 86
8 62
15.9
over al l Ti lt
lt s
Side lobe suppression
suppression for first
side l obe above
above main beam (dB)
1427 - 2690 (RB
(RBy4)
y4)
880 - 960
(r2)
1427 - 15
1 518 1695 - 19
1 990 1920 - 22
2 200 2200 - 24
2 490 2490 - 26
2 690
16.3
17.0
15.9
17.3
17.5
17.8
18.1
15.8 ±0.5 16.0 ±0.5 16.7 ±0.5 15.8 ±0.5 17.1 ±0.5 17.2 ±0.5 17.5 ±0.4 17.6 ±0.5
>15
>15
>16
> 15
> 17
> 17
> 15
> 16
Horizontal
Horizontal 3dB beam
beam widt h ( °)
67 ±1. 5
66 ±2.6
60 ±2.3
73 ±6. 0
69 ±5.5
68 ±5.7
63 ±4. 7
58 ±4.0
Vertical 3dB beam
beam widt h ( °)
9. 2 ±0.8
8.6 ±1.3
7.3 ±0.5
8.0 ±0.4
6.5 ±0.6
5.9 ±0.5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1. 5
< 1.5
Cross polar isol ation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front
Front to back ratio ,
±30 °(d B)
> 23
> 24
> 25
> 22
> 23
> 23
> 27
> 24
0°
> 18
> 19
> 22
> 20
> 22
> 21
> 22
> 17
Cr oss p ol ar r at i o (d B)
Max. power per i nput (W)
(W)
Intermodulation IM3 (dBc)
(dBc)
400 (at 50 ℃ ambient
temperature)*
250 (at 50 ℃ ambient
ambient temperature)*
temperature)*
≤ -150 (2 x 43 dBm carri er)
43 dBm carri er)
≤ -153 (2 x 43
Impedance (Ω)
50
Gr ound i ng
DC Gr ound
Electrical
Electrical Properties
Properties
4 x (1695
(1695 - 2690)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Pol ar i zat i on
2200 - 2490
2490 - 2690
+ 45° , -45 °
Electric
lectrica
al do
down
wntilt
tilt (°)
2 - 12
12 , c ont i nuousl y ad j ust ab l e , eac h b and sep ar at el y
17.3
17.5
18.1
18.2
17.1 ±0.5
17.3 ±0.5
17.9 ±0.4
18.0 ±0.5
16.8
17.1
17.6
18.0
16.5 ±0.5
16.9 ±0.5
17.4 ±0.4
17.7 ±0.5
> 17
> 17
> 18
> 17
Horizontal
Horizontal 3dB beam
beam widt h ( °)
66 ±4.7
66 ±5. 2
60 ±5.3
58 ±5.1
Vertical 3dB beam
beam widt h ( °)
6.6 ±0.6
6. 0 ±0.5
5.2 ±0.5
4.8 ±0.4
Bottom
Gain
(dBi)
Top
at m i d Ti l t
over al l Ti l t s
at m i d Ti l t
over al l Ti l t s
Side lobe suppressio
suppression
n for f irst
side l obe above
above main beam (dB)
VSWR
< 1. 5
Cross polar isol ation (dB)
≥ 28
Interband isolation (dB)
(dB)
≥ 28
Front
Front to back ratio,
±30 °(d B)
Cr oss p ol ar
ar r at io
io (d B)
0°
> 25
> 27
> 27
> 26
> 23
> 20
> 19
> 23
M ax. p ow er p er i np ut (W)
Intermodulation IM3 (dBc)
(dBc)
Impedance (Ω)
Gr ound i ng
250 (at 50 ℃ ambient
ambient temperature)*
temperature)*
≤ -153 (2 x 43 dBm carri er)
50
DC Gr ound
* Total
Total power : 1000 W (at 50 ℃ ambient
ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Elect
Elect rical d atasheet
atasheet in XML format is available.
available.
209
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
D7X
7X-- 69
6900-86
862/
2/880
880-- 96
960/
0/142
14277-269
2690/
0/4x(
4x(169
16955-26
2690)
90)-- 7x6
7x65516.5
16
.5i/
i/17
17i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i.5i-7x
7xMM-R
R
EasyRET2L5H
EasyRET
2L5H 1414-Port
Port Antenn
Antenna
a with
with 7 Integrated
Integrated RCUs - 2.6m
Model: AHP4517R2
AHP4517R2v06
v06
Mechanical Properties
Ant enna d i m ensi ons (H x W x D) (m
(mm )
2769 x 369 x 149
Pac k i ng d i mensi ons (H x W x D) (mm )
2965 x 435 x 240
Antenna weight (kg)
43.7
Cl am p s w ei ght (k g)
5.8 (2 uni t s)
Ant enna p ac k i ng w ei ght (k g)
106
64.5 (Inc l ud ed c l am p s )
M ast d i amet er sup p or t ed (mm )
50 - 115
Rad ome mat er i al
Fi b er gl ass
Rad ome c ol our
Li ght gr ey
Operational temperature ( ℃)
- 40 .. + 65
Frontal:
1435 (at 150 km/ h)
Lateral:
285 (at 150 km/ h)
Rear
Rear side: 1425 (at 150 km/ h)
Wind load (N)
M ax. op er at i onal wi nd sp eed (k m / h)
200
Sur vi val w i nd sp eed (k m / h)
250
Connec t or
1
0
9
1
14 x 4.3- 10 Femal e
Connec t or p osi t i on
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt
wntilt kit
kit
ASMDT
MDT0F01
Mech
Mecha
anica
nicall do
downtilt:
wntilt: 0 - 8 °
3.1 k g
1 (S
(Sep ar at
at e p ac ki
ki ng
ng)
Pattern sample
sample for
for reference
690 - 862 M Hz
880 - 960 M Hz
1695
1695 - 2690
2690 MHz
MHz
(Bottom)
210
1427 - 2690 M Hz
1695
1695 - 2690
2690 MHz
(Top)
9
6
7
2
D7X
7X-- 69
6900-86
862/
2/880
880-- 96
960/
0/142
14277-269
2690/
0/4x(
4x(169
16955-26
2690)
90)-- 7x6
7x65516.5
16
.5i/
i/17
17i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i.5i-7x
7xMM-R
R
EasyRET2L5H
EasyRET
2L5H 1414-Port
Port Antenn
Antenna
a with
with 7 Integrated
Integrated RCUs - 2.6m
Model: AHP4517R2
AHP4517R2v06
v06
Integrated RET Specifications
Properties
RET t yp e
Int egr at ed RET
RET p r ot oc ol s*
AISG 2.0 / 3GPP
Input volt age range (V)
(V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the mot or does not work, 12 V)
< 4.5 (when the mot or i s working, 12 V)
< 10 (when
(when the mot or is st arti ng up or
or shut ti ng down, 12 V)
Adjustment ti me (full range) (s)
Typ.
Typ. 40 (typic all y, depending on antenna type)
RET
RET connect or
4 x 8 pin connect
connect or accordi ng to IEC 60130-9
Daisy
Daisy chain in: Male / Daisy
Daisy c hain out: Female
Pin assignment according AISG
AISG
Lightning
Lightning protection (kA)
(kA)
1
2
3
4
5
6
7
8
DC
n/ c
RS- 485B
n/ c
RS- 485A
DC
DC r et ur n
n/ c
2.5 (10/350 s)
10 (8/20 s)s)
* Please confirm t he AISG
AISG prot ocol of pri mary stat ion is compati ble wit h RET
RET antenna prot ocol int erface. The prot ocol of RET
RET
antenna soft ware int erface is swit chable b etween AISG
AISG 2.0/3GPP
2.0/3GPP and AISG
AISG 1.1 wit h a vendor
vendor defi ned command. For
For more detail s
about
about prot ocol
ocol swit ching function, contact
contact Huawei
Huawei before system installati on.
Standards: EN/IEC 60950-1(Safet
60950-1(Safet y), EN/IEC 60950-22(Safet
60950-22(Safet y Equipment inst alled outdoor),EN 55032 (Emission),
(Emission),
EN 55024 (Immuni t y), ETSI
ETSI EN 301 489, FCC
FCC Part15 , ICESICES- 003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated
Integrated RET S/N:
S/N:
HWMxxx
HWMxxx
g
LTy2
RTy5
HWMxxx
HWMxxx
HWMxxx
LBy1
HWMxxx
Cy3
r1
RBy4
r2
g HWMxxx
r - Red
C - Center array
T - Top array
array
y - Yellow
b - Blue
Blue
L - Left
Left array
R - Right array
B - Bott
Bott om array
array
211
d
n
a
B
H
n
L
2
s
t
r
o
p
6
1
6
D8X
8X-- 69
6900-86
862/
2/880
880-- 96
960/
0/142
14277-269
2690/
0/5x(
5x(169
16955-26
2690)
90)-- 8x6
8x65516.5
16
.5i/
i/17
17i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5ii-8x
8xMM-R
R
EasyRET 2L6H1616-Port
Port Anten
Antenna
na with 8 IntegratedRCU
RCUs
s - 2.6
2.6m
m
Model:: AOC4518R3v06
Model
Antenna Specifications
Electrical
Electrical Properties
Properties
69
690
0 - 86
862
2
Frequency range (MHz)
690 - 803
1427
1427 - 2690
2690
790 - 8 62
62
1427 1518
1695 1990
1920 2200
+ 45° , -45°
Pol ar i zat i on
Electric
lectrica
al do
down
wntilt
tilt (°)
Gain (dBi)
88
880
0 - 96
960
0
2200 2490
2490 2690
+4 5° , -45 °
2 - 12
12 , c ont i nuousl y ad j ust ab l e , eac h b and sep ar at el y
at m i d Ti l t
15.9
over al l Ti lt
lt s
Side lobe suppressio
suppression
n for f irst
side l obe above
above main beam (dB)
16. 3
17.0
15.9
17.3
17.5
17.8
18. 1
15.8 ±0.5 16. 0 ±0.5 16.7 ±0.5 15.8 ±0.5 17.1 ±0. 5 17.2 ±0.5 17.5 ±0.4 17.6 ±0.5
>15
>15
>16
> 15
> 17
> 17
> 15
> 16
Horizontal
Horizontal 3dB beam
beam widt h ( °)
67 ±1.5
66 ±2.6
60 ±2.3
73 ±6.0
69 ±5.5
68 ±5.7
63 ±4.7
58 ±4.0
Vertical 3dB beam
beam widt h ( °)
9.2 ±0.8
8.6 ±1. 3
7.3 ±0.5
8.0 ±0.4
6.5 ±0.6
5. 9 ±0. 5
5.1 ±0.4
4.8 ±0.4
VSWR
< 1.5
< 1.5
Cross polar isol ati on (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 28
≥ 28
Front
Front to back ratio ,
±30 °(d B)
Cr oss p ol ar r at i o (d B)
0°
Max. power per i nput (W)
(W)
Intermodulation IM3 (dBc)
(dBc)
> 23
> 24
> 25
> 22
> 23
> 23
> 27
> 24
> 18
> 19
> 22
> 20
> 22
> 21
> 22
> 17
400 (at 50 ℃ ambient
temperature)*
250 (at 50 ℃ ambient
ambient temperature)*
temperature)*
≤ -150 (2 x 43 dBm carri er)
43 dBm carri er)
≤ -153 (2 x 43
Impedance (Ω)
50
Gr ound i ng
DC Gr ound
Electrical
Electrical Properties
Properties
5 x (1695
(1695 - 2690)
Frequency range (MHz)
1695 - 1990
1920 - 2200
Pol ar i zat i on
2200 - 2490
2490 - 2690
+ 45° , -45°
Electric
lectrica
al do
down
wntilt
tilt (°)
2 - 12
12 , c ont i nuousl y ad j ust ab l e , eac h b and sep ar at el y
17.3
17.5
18.1
18.2
17.1 ±0.5
17.3 ±0.5
17.9 ±0.4
18.0 ±0.5
16.8
17.1
17.6
18.0
16.5 ±0.5
16.9 ±0.5
17.4 ±0.4
17.7 ±0.5
> 17
> 17
> 18
> 17
Horizontal 3dB beam width ( °)
66 ±4. 7
66 ±5.2
60 ±5.3
58 ±5.1
Vertical 3dB beam
beam width (°)
6.6 ±0.6
6.0 ±0.5
5.2 ±0.5
4.8 ±0.4
Bottom
Gain
(dBi)
Top
Top
at m i d Ti l t
over al l Ti l t s
at m i d Ti l t
over al l Ti l t s
Side lobe suppression
suppression for first
side l obe above
above main b eam (dB)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥ 28
Interband isolation (dB)
≥ 28
Front
Front to back ratio,
±30 °(d B)
Cr oss p ol ar
ar r at io
io (d B)
0°
> 25
> 27
> 27
> 26
> 23
> 20
> 19
>23
M ax. p ower p er i np ut (W)
Intermodulation IM3 (dBc)
(dBc)
Impedance (Ω)
Gr ound i ng
250 (at 50 ℃ ambient
ambient temperature)*
temperature)*
43 dBm carri er)
≤ -153 (2 x 43
50
DC Gr ound
* Total power
power : 1000 W (at
(at 50 ℃ ambient
ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr
Electr ical dat ashee
asheett in XML
XML format is available.
available.
212
D8X
8X-- 69
6900-86
862/
2/880
880-- 96
960/
0/142
14277-269
2690/
0/5x(
5x(169
16955-26
2690)
90)-- 8x6
8x65516.5
16
.5i/
i/17
17i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5ii-8x
8xMM-R
R
EasyRET 2L6H1616-Port
Port Anten
Antenna
na with 8 IntegratedRCU
RCUs
s - 2.6
2.6m
m
Model:: AOC4518R3v06
Model
Mechanical Properties
Ant enna d i mensi ons (H x W x D) (m
(m m )
2769 x 369 x 149
Pac k i ng d i mensi ons (H x W x D) (mm )
2965 x 435 x 240
Antenna weight (kg)
46.7
Cl amp s w ei ght (k g)
5.8 (2 uni t s)
Ant enna p ac k i ng w ei ght (k g)
106
67.5 (Inc l ud ed c l am p s )
M ast d i am et er sup p or t ed (mm )
50 - 115
Rad om e m at er i al
Fi b er gl ass
Rad om e c ol our
Li ght gr ey
Operational temperature ( ℃)
- 40 .. + 65
1
0
9
1
Frontal:
1435 (at 150 km/ h)
Lateral:
285 (at 150 km/ h)
Rear
Rear side: 1425 (at 150 km/ h)
Wind load (N)
M ax. op er at i onal wi nd sp eed (k m / h)
200
Sur vi val wi nd sp eed (k m / h)
250
Connec t or
d
n
a
B
H
n
L
2
16 x 4. 3- 10 Fem al e
Connec t or p osi t i on
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt
wntilt kit
kit
ASMDT
MDT0F01
0F01
Mech
Mecha
anica
nicall down
downtilt:
tilt: 0 - 8 °
3.1 k g
1 (S
(Sep ar at
at e p ac ki
ki ng
ng)
Pattern sampl
sample for reference
880 - 96
960 M Hz
690 - 862 MHz
9
6
7
2
1427 - 26
2690 M Hz
1695
1695 - 2690
2690 MHz
MHz
1695
1695 - 2690
2690 MHz
MHz
(Top)
(Bottom)
213
s
t
r
o
p
6
1
6
D8X
8X-- 69
6900-86
862/
2/880
880-- 96
960/
0/142
14277-269
2690/
0/5x(
5x(169
16955-26
2690)
90)-- 8x6
8x65516.5
16
.5i/
i/17
17i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5i/
i/17
17.5i/17.5
.5i/17.5ii-8x
8xMM-R
R
EasyRET 2L6H1616-Port
Port Anten
Antenna
na with 8 IntegratedRCU
RCUs
s - 2.6
2.6m
m
Model:: AOC4518R3v06
Model
Integrated RET Specifications
Properties
RET t yp e
Int egr at ed RET
RET p r ot oc ol s*
AISG 2.0 / 3GPP
Input voltage range (V)
(V)
10 - 30 DC
Power consumption (W)
< 0.5 (when
(when t he motor does not work, 12 V)
V)
< 4.5 (when the mot or i s working, 12 V)
< 10 (when
(when the mot or is st art ing up or shutt ing down, 12 V)
V)
Adjustment
Adjustment ti me (full range)
range) (s)
Typ. 40 (typically, depending
depending on antenna
antenna type)
RET
RET connect or
4 x 8 pin connector acc ording t o IEC
IEC 60130-9
Daisy
Daisy chain in: Male / Daisy
Daisy chain out : Female
Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS- 485B
n/ c
RS- 485A
DC
DC r et ur n
n/ c
2.5 (10/350 s)
10 (8/20 s)s)
Lightning
Lightning protection (kA)
(kA)
* Please confirm t he AISG
AISG prot ocol of pri mary stat ion is compatib le wit h RET
RET antenna prot ocol int erface. The prot ocol of RET
RET
antenna soft ware i nter face is swit chable b etween AISG
AISG 2.0/
2.0/ 3GPP
3GPP and AISG
AISG 1.1 wit h a vendor
vendor defi ned command. For
For more
details about protocol swit ching function, contact Huawei
Huawei before system
system install ation.
Standards: EN/IEC 60950-1(Safet
60950-1(Safet y), EN/IEC 60950-22(Safet
60950-22(Safet y Equipment inst all ed outdoor),EN 55032
55032 (Emission),
(Emission),
EN 55024 (Immunit y), ETSI
ETSI EN 301 489, FCC
FCC Part
Part 15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated
Integrated RET S/N:
S/N:
HWMxxx
HWMxxx
LTy2
CTy4
RTy6
LBy1
CBy3
RBy5
HWMxxx
h
g
HWMxxx
HWMxxx
r1
HWMxxx
g
HWMxxx
h HWMxxx
r - Red
y - Yellow
b - Blue
C - Cen
enter
ter array
array
L - Le
Left
ft array
array R - Right
ight array
array
T - Top array B - Bottom array
214
r2
MultiMu
lti-ba
band
nd
B - 5 3Ln
LnH
H
10 Po
Ports
rts - 3L2
3L2H
H
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Ti l t Met hod Connec t or
Range (MHz) Beam Widt
Widt h (o)
Down
wntilt
tilt (o)
Di m ensi on(mm )
690-862/
880-960/
690-960/
1427-2690/
1695-2690
65/65/65/
65/65
16/16.5/ 2-12/2-12/
17/17.5i/ 2-12/2-12/ Easy
EasyR
RET2.0
ET2.0 10 x 4.3-10
4.3-10
18
2-12
Page
Array
symbol
APE4518R25v07
25v07
2769
2769 x 469
469 x 206
206 * * APE4518R
217
Z4
Di mensi on(m m )
M od el
Page
Array
symbol
ASI4518R18v06
218
Z5
M od el
Page
Array
symbol
AHP4518R2v06
221
Z6
M od el
12 Po
Ports
rts - 3L3
3L3H
H
Frequency 3dB Horizontal
Electrical
Gain (dB i)
Ti l t M et hod Connec t or
Range (MHz) Bea
Beam
m Widt h (o)
Down
wntilt
tilt (o)
690-862/
880-960/
690-960/
1427-2690/
1695-2690/
1695-2690
65/65/65/
65/65/65
16/16.5/
17/17.5/
18/18
2-12/2-12/
2-12/2-12/ Easy
EasyR
RET2.0
ET2.0 12 x 4.3-10
4.3-10 2769
2769 x 469 x 206
206
2-12/2-12
14 Po
Ports
rts - 3L4
3L4H
H
Frequency 3dB Horizontal
Electrical
Gain (dB i)
Ti l t M et hod Connec t or
Range (MHz) Bea
Beam
m Width (o)
Down
wntilt
tilt (o)
690-862/
880-960/
690-960/
1427-2690/
3*1695-2690
7×65
Di mensi on(m m )
16/16.5/ 2-12/2-12/
17/17.5/ 2-12/2-12/
Easy
EasyR
RET2.0
ET2.0 14 x 4.3-10
4.3-10 2769
2769 x 469 x 206
206
17.5/17.5/ 2-12/2-12/
17.5
2-12
d
n
a
B
H
n
L
3
s
t
r
o
P
6
1
0
1
Multi-band
B - 5 3LnH
16 Ports - 3L5H
Frequency 3dB Horizontal
Electrical
Gain (d Bi)
Tilt Met hod Connect or
Range (MHz) Beam Widt h (o)
Downtilt (o)
690-862/
880-960/
690-960/
1427-2690/
4*1695-2690
8 x 65
16/16.5/
17/17.5/
17.5/17.5/
17.5/17.5
Model
Page
Array
symbol
AOC4518R0v06
224
Z3
Dimension(mm)
2-12/2-12/
2-12/2-12/
EasyRET2.0 16 x 4.3-10 2769 x 469 x 206
2-12/2-12/
2-12/2-12
* * Preliminary Issue
Array Symbol Type
Type Z3
LTy2
Type Z4
Type Z5
Type Z6
RTy4
RTy5
Ly1
Cy3
LBy1
RBy4
Lr 1 Lr 2
Rr3
Cb1
Ly1
Cy2
Ry3
Ly1
Cy2
RBy3
Lr1
Rr 2 Rr 3
Lr1
Lr2
Rr3
Lr1 Lr2
Rr3
DXXXXX-690-862/880-960/690-960/1427-2690/1695-269065/65/65/65/65-16i/16.5i/17i/17.5i/18i-M/M/M/M/M-R
EasyRET3L2H 10-Port Antenna with Integrated RCUs - 2.6m
Model: APE4518R25v07
PreliminaryIssue
Electrical Properties
Frequency range (MHz)
690 - 862
880 - 960
690 - 960
1427 - 2690
1695 - 2690
Electrical downtilt (°)
2 - 12
2 - 12
2 - 12
2 - 12
2 - 12
Gain (dBi)
16.0
16.5
17.0
17.5
18.0
Side lobe suppression for f irst side
lobe above main beam (Typ.) (dB)
16
16
16
16
16
Horizontal 3dB beam widt h ( °)
65
65
65
65
65
9
7.5
8
7
6
Vertical 3dB beam widt h (°)
VSWR
< 1.5
Front t o back rat io, copolar (dB)
Cross polar rat io (dB)
0°
Intermodulation IM3 (dBc)
Typ. 25
Typ. 25
Typ. 25
Typ. 26
Typ. 25
Typ. 17
Typ. 17
Typ. 17
Typ. 17
Typ. 17
≤
-150 (2 x 43 dBm carri er)
d
n
a
B
H
n
L
3
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
3024 x 535 x 285
Antenna net weight (kg)
46.5
Mechanical downtil t (°)
0- 8
Connect or
10 x 4.3-10 Female
RET t ype
Int egrat ed RET
RET prot ocols
AISG 2.0 / 3GPP
217
s
t
r
o
p
6
1
0
1
DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/16952690-65/65/65/65/65/65-16i/16.5i/17i/17.5i/18i/18i-M/M/M/M/M/M-R
EasyRET3L3H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Model: ASI4518R18v06
Antenna Specifications
Electrical Properties
690 - 862
Frequency range (MHz)
690 - 803
790 - 862
Polarization
690 - 960
690 - 803
790 - 862
+4 5 ° , -45 °
Electrical downtilt (°)
824 - 894
15.4
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
+ 45 ° , -45 °
16.0
15.2 ±0.5
15.9
16.5
±0.5
16.2 ±0.5
15.8
15.6
16.4
±0.5
16.7
16.3 ±0.5
16.5
±0.5
16.7 ±0.5
>15
>16
>15
>15
>16
>16
70 ±5
69 ±4
64 ±4
70 ±5
69 ±4
68 ±3
64 ±4
8.3 ±0.5
7.4 ±0.4
6.4 ±0.3
9.0 ±0.5
8.0 ±0.4
7.7 ±0.5
7.2 ±0.4
< 1.5
< 1.5
Cross polar isol ati on (dB)
≥ 28
≥
28
Interband isolation (dB)
≥
28
≥
28
±30 °
17.0
>15
VSWR
Front to back ratio ,
880 - 960
2 - 12 , continuously adjust able , each band separately
at mid Tilt
Gain (dBi)
880 - 960
(dB)
> 22
> 24
> 25
> 22
> 24
> 24
> 25
0°
> 20
> 24
> 24
> 20
> 24
> 24
> 24
Cross polar rat io (dB)
Max. power per i nput (W)
400 (at 50 ℃ ambient temperature) *
Intermodulation IM3 (dBc)
≤ -150
500 (at 50 ℃ ambient temperature) *
(2 x 43 dBm carrier)
≤ - 153
Impedance (Ω)
(2 x 43 dBm carrier)
50
Grounding
DC Groun d
Electrical Properties
1427 - 2690
Frequency range (MHz)
2 x (1695 - 2690)
1427 - 15181695 - 19901920 - 22002200 - 24902490 - 26901695 - 19901920 - 22002200 - 24902490 - 2690
Polarizat ion
+45° , -45°
Electrical downtilt (°)
2 - 12 , cont inuously adjust able , each band separat ely
Gain (dBi)
at mid Tilt
16.2
17.3
17.4
+45 ° , -45°
17.9
18.0
17.0
17.5
17.6
over all Tilt s 16.1 ±0.5 17.2 ±0.5 17.3 ±0.5 17.8 ±0.5 17.9 ±0.5 16.9 ±0.6 17.4 ±0.5 17.5 ±0.5 17.9 ±0.5
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
> 15
> 16
> 16
> 17
> 17
> 16
> 16
> 18
> 17
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
62 ±5
60 ±5
58 ±4
58 ±4
5.8 ±0.3
5.2 ±0.3
4.8 ±0.2
6.5 ±0.5
5.6 ±0.4
5.2 ±0.2
4.8 ±0.3
7.9 ±0.4 6.6 ±0.4
Vertical 3dB beam widt h (°)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥
28
≥
28
Interband isolation (dB)
≥
28
≥
28
Front to back ratio ,
±30 °
< 1.5
(dB)
> 25
> 28
> 28
> 28
> 28
> 27
> 27
> 27
> 27
0°
> 15
> 18
> 16
> 16
> 15
> 22
> 20
> 19
> 18
Cross polar rat io (dB)
Max. power per input (W)
Intermodulation IM3 (dBc)
250 (at 50 ℃ ambient temperature)*
≤
250 (at 50 ℃ ambient temperature)*
-153 (2 x 43 dBm carri er)
Impedance (Ω)
Grounding
≤
50
DC Ground
* Tot al power : 1000 W (at 50 ℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
218
18.0
-153 (2 x 43 dBm carri er)
DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/16952690-65/65/65/65/65/65-16i/16.5i/17i/17.5i/18i/18i-M/M/M/M/M/M-R
EasyRET3L3H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Model: ASI4518R18v06
Mechanical Properties
144
Ant enna dimensions (H x W x D) (mm)
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
3024 x 535 x 285
Antenna weight (kg)
48.6
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
73.4 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
3
7
8
1
Frontal:
1370 (at 150 km/h)
Lateral:
390 (at 150 km/ h)
Rear side: 1305 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
9
6
7
2
12 x 4.3-10 Female
Connect or posit ion
Bot t om
d
n
a
B
H
n
L
3
Accessories
Item
Model
Description
Weight
Units per antenna
Downt il t k it
ASMDT0F01
Mec hani cal downt il t : 0 - 8 °
3.1 kg
1 (Separ at e p ac ki ng)
Pattern sample for reference
690 - 862 MHz
1427 - 2690 MHz
880 - 960 MHz
690 - 960 MHz
1695 - 2690 MHz
219
s
t
r
o
p
6
1
0
1
DXXXXXX-690-862/880-960/690-960/1427-2690/1695-2690/16952690-65/65/65/65/65/65-16i/16.5i/17i/17.5i/18i/18i-M/M/M/M/M/M-R
EasyRET3L3H 12-Port Antenna with 6 Integrated RCUs - 2.6m
Model: ASI4518R18v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the mot or does not work, 12 V)
< 4.5 (when the mot or i s working, 12 V)
< 10 (when the mot or is st arti ng up or shut ti ng down, 12 V)
Adjustment ti me (full range) (s)
Typ. 40 (typic all y, depending on antenna t ype)
RET connect or
4 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy chain out : Female
Pin assignment according AISG
Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
2.5 (10/350 s)
10 (8/20 s)s)
* Please confirm t he AISG prot ocol of pri mary stat ion is compatib le wit h RET antenna prot ocol int erface. The protocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor def ined command. For more
details about pr otocol switching function, contact Huawei before system install ation.
Standards: EN/IEC 60950-1(Safet y), EN/IEC 60950-22(Safet y Equipment inst all ed outd oor), EN 55032 (Emission),
EN 55024 (Immunit y), ETSI EN 301 489, FCC Part 15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
HWMxxx
HWMxxx
HWMxxx
Ly1
Cy2
Ry3
HWMxxx
HWMxxx
HWMxxx
r - Red
L - Left array
220
y - Yellow
R - Right array C - Center array
Lr1 Lr2
Rr3
D7X-690-862/880-960/690-960/1427-2690/3x(1695-2690)-7x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET3L4H 14-Port Antenna with 7 Integrated RCUs - 2.6m
Model: AHP4518R2v06
Antenna Specifications
Electrical Properties
690 - 862
Frequency range (MHz)
690 - 803
790 - 862
Polarizat ion
690 - 960
690 - 803
790 - 862
+45° , -45°
Electrical downtilt (°)
824 - 894
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
+45 ° , -45°
15.4
16.0
16.5
15.8
16.4
16.7
16.9
15.2 ±0.5
15.9 ±0.5
16.2 ±0.5
15.6 ±0.5
16.3 ±0.5
16.5 ±0.5
16.7 ±0.5
> 15
> 15
> 16
> 15
> 15
> 16
> 16
70 ±5
69 ±4
64 ±4
70 ±5
69 ±4
68 ±3
64 ±4
8.3 ±0.5
7.4 ±0.4
6.4 ±0.3
9.0 ±0.5
8.0 ±0.4
7.7 ±0.5
7.2 ±0.4
VSWR
< 1.5
Cross polar isol ati on (dB)
≥
28
≥
28
Interband isolation (dB)
≥
28
≥
28
Front to back ratio ,
±30 °
880 - 960
2 - 12 , cont inuously adjust able , each band separat ely
at mid Tilt
Gain (dBi)
880 - 960
< 1.5
(dB)
> 22
> 24
> 25
> 22
> 24
> 24
> 25
0°
> 20
> 24
> 24
> 20
> 24
> 24
> 24
Cross polar rat io (dB)
Max. power per input (W)
400 (at 50 ℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤
500 (at 50 ℃ ambient temperature)*
-150 (2 x 43 dBm carri er)
≤
Impedance (Ω)
-153 (2 x 43 dBm carri er)
50
Grounding
DC Ground
d
n
a
B
H
n
L
3
Electrical Properties
1427 - 2690
Frequency range (MHz)
3 x (1695 - 2690)
1427 - 15181695 - 19901920 - 22002200 - 24902490 - 26901695 - 19901920 - 22002200 - 24902490 - 2690
Polarizat ion
+45° , -45°
Electrical downtilt (°)
2 - 12 , cont inuously adjust able , each band separat ely
at mid Tilt
over all Tilt s
Gain
(dBi)
Bottom
Top
+4 5° , -45°
16.2
17.3
17.4
17.9
18.0
16.1 ±0.5
17.2 ±0.5
17.3 ±0.5
17.8 ±0.5
17.9 ±0.5
at mid Tilt
over all Tilt s
16.6
17.0
17.2
17.7
16.5 ±0.5
16.9 ±0.5
17.1 ±0.5
17.5 ±0.5
16.7
17.1
17.2
17.7
16.6 ±0.5
17.0 ±0.5
17.1 ±0.5
17.5 ±0.5
at mid Tilt
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vert ical 3dB beam
Bot t om
width (°)
Top
> 15
> 16
> 16
> 17
> 17
> 16
> 16
> 16
> 16
62 ±7
61 ±7
62 ±6
58 ±5
58 ±5
61 ±5
61 ±5
59 ±4
58 ±4
7.9 ±0.4
6.6 ±0.4
5.8 ±0.3
5.2 ±0.3
4.8 ±0.2
7.6 ±0.5
6.7 ±0.4
6.0 ±0.3
5.4 ±0.3
6.5 ±0.5
5.8 ±0.4
5.2 ±0.3
4.8 ±0.3
VSWR
< 1.5
Cross polar isol ati on (dB)
≥
28
≥
28
Interband isolation (dB)
≥
28
≥
28
Front to back ratio ,
±30 °
(dB)
> 25
0°
> 15
Cross polar rat io (dB)
Max. power per input (W)
Intermodulation IM3 (dBc)
< 1.5
> 28
> 28
> 28
> 28
> 25
> 25
> 25
> 26
> 18
> 16
> 16
> 15
> 20
> 18
> 17
> 18
250 (at 50 ℃ ambient temperature)*
≤
250 (at 50 ℃ ambient temperature)*
-153 (2 x 43 dBm carri er)
Impedance (Ω)
Grounding
≤
-153 (2 x 43 dBm carri er)
50
DC Ground
* Total p ower : 1000 W (at 50 ℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical datasheet in XML format is available.
221
s
t
r
o
p
6
1
0
1
D7X-690-862/880-960/690-960/1427-2690/3x(1695-2690)-7x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET3L4H 14-Port Antenna with 7 Integrated RCUs - 2.6m
Model: AHP4518R2v06
144
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2769 x 469 x 206
Packing dimensions (H x W x D) (mm)
3024 x 535 x 285
Antenna weight (kg)
50.6
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
75.4 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
3
7
8
1
Frontal:
1370 (at 150 km/h)
Lateral:
390 (at 150 km/ h)
Rear side: 1305 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
14 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt : 0 - 8°
3.1 kg
1 (Separate packing)
Pattern sample for reference
222
690 - 862 MHz
880 - 960 MHz
690 - 960 MHz
1427 - 2690 MHz
1695 - 2690 MHz
(Bottom)
1695 - 2690 MHz
(Top)
9
6
7
2
D7X-690-862/880-960/690-960/1427-2690/3x(1695-2690)-7x6516i/16.5i/17i/17.5i/17.5i/17.5i/17.5i-7xM-R
EasyRET3L4H 14-Port Antenna with 7 Integrated RCUs - 2.6m
Model: AHP4518R2v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the mot or does not work, 12 V)
< 4.5 (when the mot or i s working, 12 V)
< 10 (when the mot or is st art ing up or shutt ing down, 12 V)
Adjustment ti me (full range) (s)
Typ. 40 (typic all y, depending on antenna type)
RET connect or
4 x 8 pin connector according t o IEC 60130-9
Daisy chain i n: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
2.5 (10/350 s)
10 (8/20 s)s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pri mary stat ion is compati bl e with RET antenna prot ocol int erface. The protocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/ 3GPP and AISG 1.1 wit h a vendor def ined command. For more
details about prot ocol swit ching function, contact Huawei before system install ation.
Standards: EN/IEC 60950-1(Safet y), EN/IEC 60950-22(Safet y Equipment inst all ed outdoor),EN 55032 (Emission),
EN 55024 (Immunit y), ETSI EN 301 489, FCC Part 15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
d
n
a
B
H
n
L
3
Integrated RET S/N:
HWMxxx
RTy4
g
HWMxxx
Lr1
HWMxxx
Ly1
HWMxxx
Cy2
HWMxxx
RBy3
Ly1
Cy2
RBy3
Rr3
Lr1 Lr2
HWMxxx
g
r3
HWMxxx
r - Red
L - Left array
T - Top array
RTy4
y - Yellow
b - Blue
C - Center array R - Right array
B - Bottom array
223
s
t
r
o
p
6
1
0
1
2MXX-690-960/1710-2200-65/33-16i/19.5i-M/M-R
EasyRETHybrid Triple-beamAntenna with 3 Integrated RCUs - 2.0m
Model: AMB4520R2v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor activated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
2x 8 pin connector accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy c hain out: Female
RET connect or
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
* Please confirm t he AISG prot ocol of pr imary st ation is compat ibl e wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For m ore
details about prot ocol swit ching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part 15, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
HWMxxx
HWMxxx
r - Red
b - Blue
Pattern sample for reference
690 - 960 MHz
236
1710 - 2200 MHz
(b2-30)
1710 - 2200 MHz
(b1+30)
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRETHybrid Penta-beamAntenna with 5 Integrated RCUs - 2.6m
Model: AMB4519R2v06
AntennaSpecifications
Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
Polarizat ion
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
880 - 960
0 - 10 , cont inuously adjust able
at mid Tilt
over all Tilt s
15.9
16.0
16.1
16.4
15.7 ±0.4
15.8 ±0.5
15.9 ±0.4
16.2 ±0.5
> 18
> 19
> 18
> 18
68 ±4
67 ±4
67 ±3
66 ±4
9.5 ±0.6
8.8 ±0.6
8.4 ±0.6
7.8 ±0.4
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
VSWR
< 1.5
Cross polar isol ati on (dB)
≥
25
Interband isolation (dB)
≥
28
Front to back ratio,
±30 ° (dB)
0°
Cross polar rat io (dB)
> 25
> 26
> 26
> 26
> 15
> 17
> 17
> 17
Max. power per input (W)
500 (at 50 ℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤
-153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2200
Frequency range (MHz)
1695 - 1990
2 x (1695 - 2690)
1920 - 2200
1695 - 1990
2200 - 2490
2490 - 2690
+45° , -45°
Polarizat ion
0 - 10 , continuously
adjustable
Electrical downtilt (°)
Gain (dBi)
1920 - 2200
at mid Tilt
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
17.3
18.1
17.1 ±0.6
17.9 ±0.6
> 17
> 17
33 ±3
7.2 ±0.5
2 - 12 , continuously adjustable , each band separately
16.9
17.1
17.2
17.0 ±0.5
17.0 ±0.5
> 17
> 17
> 17
> 17
30 ±3
60 ±5
61 ±5
63 ±5
58 ±5
6.5 ±0.5
6.5 ±0.6
5.8 ±0.4
5.0 ±0.5
4.8 ±0.3
16.8
±0.6
VSWR
17.2
±0.5
< 1.5
Horizontal beam centers (°)
Cross polar isolat ion (dB)
± 29
± 27
Same beam:
Beam t o beam isolation (dB)
≥
≥
/
25
≥
18
28
/
Interband isolation (dB)
Front to back ratio,
17.3
≥
28
±30 ° (dB)
> 27
> 29
> 26
> 27
> 27
> 28
0°
> 15
> 17
> 17
> 20
> 20
> 20
Cross pol ar rat io (dB)
Max. power per input (W)
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
250 (at 50 ℃ ambient temperature)*
≤
-153 (2 x 43 dBm carri er)
50
DC Ground
* Total power : 1000 W (at 50 ℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
237
m
a
e
b
-i
tl
u
M
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRETHybrid Penta-beamAntenna with 5 Integrated RCUs - 2.6m
Model: AMB4519R2v06
Mechanical Properties
106
Ant enna dimensions (H x W x D) (mm)
2685 x 359 x 178
Packing dimensions (H x W x D) (mm)
2985 x 425 x 255
Antenna weight (kg)
35.0
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
54.1 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
7
3
8
1
5
8
6
2
Frontal : 1290 (at 150 km/h)
Lateral:
350 (at 150 km/ h)
Rear side: 1075 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
10 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt:
0- 8°
3.1 k g
1 (Separat e packi ng)
Pattern sample for reference
238
690 - 960 MHz
1695 - 2690 MHz
1695 - 2200 MHz
(b2-30)
1695 - 2200 MHz
(b1+30)
2MXXXX-690-960/1695-2690/1695-2690/1695-2200-65/65/65/3317i/17.5i/17.5i/18.5i-M/M/M/M-R
EasyRETHybrid Penta-beamAntenna with 5 Integrated RCUs - 2.6m
Model: AMB4519R2v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 6 (motor act ivated, 12V)
< 1.5 (st and by, 12V)
Adjustment ti me (full range) (s)
< 65 (typic all y, depending on antenna t ype)
4 x 8 pin connect or accordi ng to IEC 60130-9
Daisy chain in: Male / Daisy c hain out: Female
RET connect or
Pin assignment according AISG
Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
3 (10/350 s)
10 (8/20 s)
* Please confirm t he AISG prot ocol of pr imary st ation is compat ibl e wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For m ore detail s
about prot ocol swit ching function, contact Huawei before system installati on.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safet y - Equipment i nstal led out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part 15, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
Ly1
HWMxxx
Ry2
r1
Ly1
HWMxxx
HWMxxx
Ry2
HWMxxx
b2
b1
b2
r - Red
y - Yellow b - Blue
L - Left array
R - Right array
239
m
a
e
b
-i
tl
u
M
2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m
Model: AMB4519R4v06
AntennaSpecifications
Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803
790 - 862
Electrical downtilt (°)
0 - 10 , cont inuously adjust able
at mid Tilt
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
15.9
16.1
16.3
16.5
15.7 ±0.4
15.9 ±0.5
16.1 ±0.4
16.3 ±0.5
> 18
> 19
> 18
> 18
68 ±4
67 ±4
67 ±3
66 ±4
9.5 ±0.6
8.8 ±0.6
8.4 ±0.6
7.8 ±0.4
VSWR
< 1.5
Cross polar isol ati on (dB)
≥
25
Interband isolation (dB)
≥
28
Front to back ratio,
880 - 960
+45° , -45°
Polarizat ion
Gain (dBi)
824 - 894
±30 ° (dB)
> 25
> 26
> 26
> 26
0°
> 15
> 17
> 17
> 17
Cross pol ar rat io (dB)
Max. power per input (W)
500 (at 50 ℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤
-153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
DC Ground
Electrical Properties
1695 - 2200
Frequency range (MHz)
1695 - 1990
2 x (1695 - 2200)
1920 - 2200
1695 - 1990
Electrical downtilt (°)
0 - 10 , cont inuousl y adjust abl e
at mid Tilt
over all Tilt s
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
2 - 12 , cont inuousl y adjust abl e , each band separat el y
18.1
17.1
17.6
18.0
17.1 ±0.6
17.9 ±0.6
17.0 ±0.4
17.4 ±0.4
17.8 ±0.5
> 17
> 17
> 17
> 17
> 17
33 ±3
30 ±3
60 ±5
61 ±5
58 ±5
7.2 ±0.5
6.5 ±0.5
6.4 ±0.6
5.8 ±0.4
4.8 ±0.3
< 1.5
Horizontal beam centers (°)
± 29
Cross polar isolat ion (dB)
± 27
Same beam:
Beam to beam isolation (dB)
≥
≥
/
25
≥
18
28
/
Interband isolation (dB)
≥
28
±30 ° (dB)
> 27
> 29
> 26
> 27
> 28
0°
> 15
> 17
> 18
> 18
> 18
Cross pol ar rat io (dB)
Max. power per input (W)
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
250 (at 50 ℃ ambient t emperature)*
≤
-153 (2 x 43 dBm carri er)
50
DC Ground
* Total power : 1000 W (at 50 ℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
240
2490 - 2690
17.3
VSWR
Front to back ratio,
1920 - 2200
+45° , -45°
Polarizat ion
Gain (dBi)
2 x (2490 - 2690)
2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m
Model: AMB4519R4v06
Mechanical Properties
106
Ant enna dimensions (H x W x D) (mm)
2685 x 359 x 178
Packing dimensions (H x W x D) (mm)
2985 x 425 x 255
Antenna weight (kg)
39.5
Clamps weight (kg)
5.8 (2 unit s)
Ant enna packing weight (kg)
57.8 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
Frontal : 1290 (at 150 km/h)
Lateral:
350 (at 150 km/ h)
Rear side: 1075 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
7
3
8
1
5
8
6
2
14 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0F01
Mechanical downtilt: 0 - 8 °
3.1 k g
1 (Sep ar at e p ac ki ng)
m
a
e
b
-i
tl
u
M
Pattern sample for reference
690 - 960 MHz
1695 - 2200 MHz
(Bb2)
1695 - 2200 MHz
2490 - 2690 MHz
1695 - 2200 MHz
(Bb1)
241
2MXXXXXX-690-960/1695-2200/1695-2200/2490-2690/2490-2690/16952200-65/65/65/65/65/33-17i/17.5i/17.5i/18i/18i/18.5i-M/M/M/M/M/M-R
EasyRET Hybrid Hepta-beam Antenna with 7 Integrated RCUs - 2.6m
Model: AMB4519R4v06
Integrated RET Specifications
Properties
RET t ype
Int egrat ed RET
RET prot ocols*
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the mot or d oes not work, 12 V)
< 4.5 (when the mot or i s working, 12 V)
< 10 (when t he motor i s start ing up or shutt ing down, 12 V)
Adjustment t ime (full range) (s)
Typ. 40 (typic all y, depending on antenna t ype)
RET connect or
4 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain in: Male / Daisy chain out : Female
Pin assignment according AISG
Lightning protection (kA)
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
2.5 (10/350 s)
10 (8/20 s)s)
* Please confirm t he AISG prot ocol of pr imary st ation is compat ibl e wit h RET antenna prot ocol int erface. The prot ocol of RET
antenna soft ware i nterf ace is swit chable b etween AISG 2.0/3GPP and AISG 1.1 wit h a vendor defi ned command. For m ore
details about prot ocol swit ching function, contact Huawei before system install ation.
Standards: UL 60950-1 (Safety), UL 60950-22 (Safety Equipment inst all ed out door), EN 55032 (Emission),
EN 55024 (Immuni t y), ETSI EN 301 489, FCC Part 15, ICES- 003
Certification: CE, FCC, IC, RCM
Integrated RET S/N:
HWMxxx
HWMxxx
HWMxxx
g
r1
r1
RTb4 Ry2
b1
HWMxxx
HWMxxx
y2
HWMxxx
2
g HWMxxx
1
r - Red
y - Yellow b - Blue
L - Left array
R - Right array
T - Top array
B - Bottom array
242
LTb3 Ly1
Bb1
Bb2
2MXXX-1710-2690/1710-2690/1710-2200-65/65/33-18i/18i/19.5iM/M/M-R
EasyRETHybrid Quad-beamAntenna with 4 Integrated RCUs - 2.6m
Model: AMB4520R4v06
AntennaSpecifications
Electrical Properties
1710 - 2200
Frequency range (MHz)
2 x (1710 - 2690)
1710 - 1880 1850 - 1990 1920 - 2200 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarizat ion
+45° , -45°
Electrical downtilt (°)
at mid Tilt
Gain (dBi)
0 - 12 , continuously adjustable , each band
separately
2 - 12 , cont inuously adjust able
over all Tilt s
18.6
19.2
19.5
17.0
17.3
17.6
17.7
18.4 ±0.6
19.0 ±0.6
19.3 ±0.4
16.9 ±0.5
17.2 ±0.4
17.4 ±0.5
17.5 ±0.4
> 18
> 18
> 18
> 18
> 20
> 19
> 19
36 ±2
33 ±2
31 ±2
67 ±3
64 ±2.5
62 ±2.5
61 ±2.5
7.2 ±0.4
6.9 ±0.4
6.6 ±0.4
6.9 ±0.5
6.3 ±0.3
5.5 ±0.5
5.0 ±0.3
Side lobe suppression for f irst
side l obe above main beam (dB)
Horizontal 3dB beam widt h ( °)
Vertical 3dB beam widt h (°)
VSWR
< 1.5
Horizontal beam centers (°)
± 31
Cross polar isolat ion (dB)
± 30
Same beam:
Beam t o beam isolation (dB)
≥
18
Interband isolation (dB)
≥
28
Front to back ratio,
± 28
≥
/
28
≥
28
/
≥
28
±30 ° (dB)
> 32
> 32
> 34
> 27
> 27
> 27
> 27
0°
> 20
> 20
> 20
> 19
> 19
> 22
> 22
Cross pol ar rat io (dB)
Max. power per input (W)
250 (at 50 ℃ ambient temperature)
Tot al power (W)
960 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤
-153 (2 x 43 dBm carri er)
Impedance (Ω)
50
Grounding
m
a
e
b
-i
tl
u
M
DC Ground
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electr ical dat asheet in XML format is available.
106
Mechanical Properties
Ant enna dimensions (H x W x D) (mm)
2688 x 349 x 166
Packing dimensions (H x W x D) (mm)
2985 x 425 x 255
Antenna weight (kg)
32.5
Clamps weight (kg)
3.6 (2 unit s)
Ant enna packing weight (kg)
48.5 (Included clamps)
Mast diamet er support ed (mm)
50 - 115
Radome mat erial
Fiberglass
Radome colour
Light grey
Operational temperature ( ℃)
-40 .. +65
4
3
8
1
0
8
5
2
Frontal :
990 (at 150 km/h)
Lateral:
325 (at 150 km/ h)
Rear side: 1030 (at 150 km/ h)
Wind load (N)
Max. operat ional wind speed (km/ h)
200
Survival wind speed (km/ h)
250
Connect or
8 x 4.3-10 Female
Connect or posit ion
Bot t om
Accessories
Item
Model
Description
Weight
Units per antenna
Dow ntil t ki t
ASMDT0D01
Mechanical downtilt: 0 - 8 °
2.1 kg
1 (Separate packing)
243
8
8
6
2
C-1-5. Bias Tee (BT)
Frequency
Range(MHz)
AISG type
Insertion loss (dB)
Dimension (mm)
Model
Page
690-2700
AISG 2.0
≤ 0.1
(690-960/1710- 2690 MHz)
≤ 0.15 (960-1710 MHz)
48.5 x 151 x 45
ABT000001
292
Adjustment t ime
(full range) (min)
Dimension (mm)
Model
Page
C-1-6. AISG ConnectingCables
Input voltage
range (V)
AISG type
AISG Connecting Cables For Remote Electrical Tilt(RET) System
295
AISG Connect ing Cabl es For Huawei RRU RET_Port
296
C-1-7. Portable AISG Adapter (PAA)
Out put power
ALD Port
Wireless Port
Dimension (mm)
Model
Page
DC 12V 2A
1x8 core female
connector
Bluet oot h 2.0 + EDR
30 x 204 x 88
APAA00001
297
C-2. Intelligent Management
C - 2 - 1. Antenna Information Sensor Unit (AISU)
Input voltage
range (V)
AISG t ype
Prot ect ion class
Dimension (mm)
Model
Page
DC 10 - 30
AISG-ES-RAE V2.1.0
IP65
37 x 325 x 129
AISU00001v01
299
* * Preliminary Issue
AntennaandRCU
configurationlist
Ant enna Model
AISG 2.0
A79451500v06
A79451600v06
A79451700v06
A79451702v06
ADU451503v06
ADU451602v06
ADU451807v06
ARCU02004v01
ATR451602v06
ATR451715v06
ATR451704v06
ATR451709v06
ATR451606v06
ATR451607v06
A264518S0
**RCU is used for MET1.0 antennas upgradeto RET antennas.
l
a
ti
g
i
D
275
AntennaandAIMM
configurationlist
Antenna Model
MET2.0
EasyRET2.0
(Corresponding to MET2.0)
A79451503v06
A794515R1v06
A70452100v06
A704521R0v06
A19451811v06
A194518R0v06
A26451800v06
A264518R0v06
ADU451819v06
ADU4518R1v06
ADU451816v06
ADU4518R6v06
ADU451716v06
ADU4518R10v06
ADU451604v06
ADU4518R11v06
ADU451712v06
ADU4518R12v06
AMB452003v06
AMB4520R5v06
AMB452000v06
AMB4520R0v06
ATR451807v06
ATR4518R15v06
ATR451714v06
ATR4518R14v06
AIMM
(Antenna inf ormati on management module)
AIMM20S11v01
AIMM20D11v01
AIMM20M11v01
**AIMM is used for MET2.0 antennas upgradeto RET antennas.
276
RCU
Model: ARCU02001(AISG 2.0)
RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to
change the electrical downtilt. RCU is suitable for daisy chain solution. RCU is used for MET1.0
antennas upgradingto RET antennas.
Input volt age range (V)
DC 10 - 30
< 600 (motor act ivated)
Current (mA)
< 50 (st and by)
Adjustment ti me (full range)
(min)
<2
Calibrat ion t ime (min)
<4
2 x 8 pin connect or accord ing t o IEC 60130-9
Connectors
Daisy chain i n: Male // Daisy chain out : Female
Pin assignment acc ording AISG
Housing mat erial
1
2
3
4
5
6
7
8
DC
n/ c
RS485B
n/ c
RS-485A
DC
DC
return
n/ c
Profile: Aluminium c oat ed / / Cover: Aluminium die cast coat ed
Color
Grey
Weight (g)
600
Operating temperature range
(℃)
-
Prot ect ion class
+65
IP24
Dimensions (L x W x H) (mm)
200 x 56 x 47
Packing size (L x W x H) (mm)
268 x 105 x 95
Daisy chain i n: Male
Daisy c hain out: Female
Drainage
Hole
Drainage
Hole
Appearance
Bott om view of RCU
l
a
ti
g
i
D
Male
Female
Please note: Before the inst allati on, check whether t he RCU and base stat ion support t he same AISG
protocol. If not , contact t he t echnical support personnel of Huawei.
277
RCU
Model: ARCU02004v01 (AISG 2.0)
FeatureDescription



RCU (Remote Control Unit ) drives t he phase shift er in antenna t hrough mechanical i nt erface t o
change t he electrical d owntil t .
RCU is suit able for daisy chain solut ion.
RCU is used for MET1.0 ant ennas upgrading t o RET ant ennas.
Input volt age range (V)
DC 10 - 30
Power c onsumpti on (W)
< 0.5 (when the mot or does not work, 12 V)
< 3 (when the motor is worki ng, 12 V)
< 10 (when the mot or is st art ing up or shutt ing down, 12 V)
Adjust ment t ime (full range) (s)
Typ. 35 (depending on ant enna t ype)
Calibrat ion t ime (min)
< 3 (t ypically, depending on ant enna t ype)
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain i n: Male // Daisy chain out : Female
Connectors
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS485B
n/ c
RS-485A
DC
DC
return
n/ c
Housing mat erial
Profile: Aluminium coat ed / / Cover: Aluminium die cast coat ed
Color
RAL 7035
Weight (g)
440
Operati ng temperatur e range
(℃)
-
Prot ect ion class
IP24
2.5 (10/350 s)
10 (8/20 s)
Lightning protect ion (kA)
Dimensions (L x W x H) (mm)
180 x 65 x 54
Packing size (L x W x H) (mm)
268 x 105 x 95
Standards:
EN/IEC 60950-1(Safet y)
EN/IEC 60950-22(Safet y
install ed outdoor)
Equipment
EN 55032(Emission)
Please note:
Before the inst all ati on, check whether t he RCU and base
stati on support t he same AISG protocol. If not, contact t he
technical support personnel of Huawei.
EN 55024(Immunit y)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, RCM, RoHS, REACH, WEEE
Daisy chain out: Female
Daisy chain in: Male
Drainage
Hole
Appearance
278
Bottom view of RCU
Male
Female
2-Port Antenna Information Management Module with One Pair of
AISG Connectors (1 Input and 1 Output)
Model: AIMM20S11v01
FeatureDescription


The AIMM can adjust t he elect rical downtil t s of RET antennas for antenna informat ion
management.
The AIMM is used for MET2.0 2-port antennas upgrading to RET antennas.
Prot ocol
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
< 0.5 (when the mot or does not work, 12 V)
< 3 (when the mot or i s working, 12 V)
< 10 (when t he motor i s start ing up or shutt ing down, 12 V)
Power consumpt ion (W)
Adjust ment t ime (full range) (s)
Typ. 30
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain i n: Male // Daisy chain out : Female
Connectors
Pin assignment accord ing AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
Operati ng temperat ure range (℃)
-40 t o +65
2.5 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
Weight (g)
350
Packing Weight (g)
448
Dimensions (L x W x H) (mm)
197 x 82 x 30
Packing size (L x W x H) (mm)
250 x 118 x 40
Standards:
EN/IEC 60950-1(Safet y)
EN/IEC 60950-22(Safet y
install ed outdoor)
Equipment
EN 55032(Emission)
Please note:
Before the install ation, check whether the AIMM and base
stati on support t he same AISG protocol. If not , contact the
technical support personnel of Huawei.
EN 55024(Immunit y)
ETSI EN 301 4 89
FCC Part 15
ICES-003
Certification:
l
a
ti
g
i
D
CE, FCC, IC, RCM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
Male
Female
279
4-Port Antenna Information Management Module with One Pair of
AISG Connectors (2Input and 2Output)
Model: AIMM20D11v01
FeatureDescription


The AIMM can adjust t he elect rical downtil t s of RET antennas for antenna informat ion
management.
The AIMM is used for MET2.0 4-port antennas upgrading to RET antennas.
Prot ocol
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
< 0.5 (when the mot or does not work, 12 V)
< 3 (when the mot or i s working, 12 V)
< 10 (when t he motor i s start ing up or shutt ing down, 12 V)
Power consumpt ion (W)
Adjust ment t ime (full range) (s)
Typ. 30
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain i n: Male // Daisy chain out : Female
Connectors
Pin assignment accord ing AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
Operati ng temperat ure range (℃)
2.5 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
Weight (g)
500
Packing weight (g)
598
Dimensions (L x W x H) (mm)
203 x 107 x 30
Packing size (L x W x H) (mm)
250 x 118 x 40
Standards:
EN/IEC 60950-1(Safety)
EN/IEC 60950-22(Safet y
install ed outdoor)
Equipment
EN 55032(Emission)
Please note:
Before the installation, check whether the AIMM and base
stati on support t he same AISG protocol. If not, contact the
technical support personnel of Huawei.
EN 55024(Immunit y)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, RCM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
280
Male
Female
4-Port Antenna Information Management Module with Two Pairs of
AISG Connectors (2Input and 2Output)
Model: AIMM20D22v01
FeatureDescription


The AIMM can adjust t he elect rical downtil t s of RET antennas for antenna informat ion
management.
4-port antennas are supported.
Prot ocol
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
Power c onsumpti on (W)
< 0.5 (when the mot or does not work, 12 V)
< 3 (when the mot or i s working, 12 V)
< 10 (when the mot or is st art ing up or shutt ing down, 12 V)
Adjust ment t ime (full range) (s)
Typ. 30
4 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain i n: Male // Daisy chain out : Female
Connectors
Pin assignment accor ding AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
Operating temperature range (℃)
2.5 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
Weight (g)
510
Packing weight (g)
608
Dimensions (L x W x H) (mm)
197 x 107 x 30
Packing size (L x W x H) (mm)
250 x 118 x 40
Standards:
EN/IEC 60950-1(Safet y)
EN/IEC 60950-22(Safet y
install ed outdoor)
Equipment
EN 55032(Emission)
Please note:
Before the installation, check whether the AIMM and base station
support the same AISG protocol. If not, contact the t echnical support
personnel of Huawei.
EN 55024(Immunit y)
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
l
a
ti
g
i
D
CE, FCC, IC, RCM, RoHS, REACH, WEEE
Daisy c hain out: Female
Daisy chain i n: Male
Daisy c hain out: Female
Daisy chain i n: Male
Appearance
Male
Female
281
6-Port Antenna Information Management Module with OnePair of
AISG Connectors (1 Input and 1 Output)
Model: AIMM20M11v01
FeatureDescription


The AIMM can adjust t he elect rical downtil t s of RET antennas for antenna informat ion
management.
The AIMM is used f or MET2.0 6-port antennas upgrading to RET antennas.
Prot ocol
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
< 0.5 (when the mot or does not work, 12 V)
< 4.5 (when t he motor is worki ng, 12 V)
< 10 (when t he motor i s start ing up or shutt ing down, 12 V)
Power consumpt ion (W)
Adjust ment t ime (full range) (s)
Typ. 40
2 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain i n: Male // Daisy chain out : Female
Connectors
Pin assignment accord ing AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
Operati ng temperat ure range (℃)
-40 t o +65
2.5 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
Weight (g)
610
Packing weight (g)
723
Dimensions (L x W x H) (mm)
203 x 153 x 30
Packing size (L x W x H) (mm)
245 x 163 x 37
Standards:
EN/IEC 60950-1(Safet y)
EN/IEC 60950-22(Safet y
install ed outdoor)
Equipment
EN 55032(Emission)
EN 55024(Immunit y)
Please note:
1. Before the installation, check whether t he AIMM and
base stati on support t he same AISG prot ocol. If not,
contact t he technical support personnel of Huawei.
2. For Multi-RET requirements, please contact t he
technical support personnel of Huawei.
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
CE, FCC, IC, RCM, RoHS, REACH, WEEE
Daisy chain in: Male
Daisy chain out: Female
Appearance
282
Male
Female
6 and More Ports Information Management Module with Two Pairs of
AISG Connectors (2Input and 2Output)
Model: AIMM20M22v01
FeatureDescription


The AIMM can adjust t he elect rical downtil t s of RET antennas for antenna informat ion management.
Antennas capable of 6 or more ports are support ed.
Prot ocol
AISG 2.0 / 3GPP
Input volt age range (V)
10 - 30 DC
< 0.5 (when the mot or does not work, 12 V)
< 4.5 (when t he motor is worki ng, 12 V)
< 10 (when t he motor i s start ing up or shutt ing down, 12 V)
Power consumpt ion (W)
Adjust ment t ime (full range) (s)
Typ. 40
4 x 8 pin connect or accord ing t o IEC 60130-9
Daisy chain i n: Male // Daisy chain out : Female
Connectors
Pin assignment accord ing AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
Operati ng temperat ure range (℃)
-40 t o +65
2.5 (10/350 s)
10 (8/20 s)
Lightning protection (kA)
Weight (g)
670
Packing weight (g)
783
Dimensions (L x W x H) (mm)
203 x 153 x 30
Packing size (L x W x H) (mm)
245 x 163 x 37
Standards:
EN/IEC 60950-1(Safet y)
EN/IEC 60950-22(Safet y
install ed outdoor)
Equipment
EN 55032(Emission)
EN 55024(Immunit y)
Please note:
1. Before the installation, check whether the AIMM and
base stati on support t he same AISG prot ocol. If not,
contact t he technical support personnel of Huawei.
2. For Multi-RET requirements, please contact t he
technical support personnel of Huawei.
ETSI EN 301 489
FCC Part 15
ICES-003
Certification:
l
a
ti
g
i
D
CE, FCC, IC, RCM, RoHS, REACH, WEEE
Daisy chain out: Female
Daisy chain i n: Male
Daisy c hain out: Female
Daisy chain i n: Male
Appearance
Male
Female
283
REU-3way
Model: AREU01301
The RET Expansion Unit (REU) is a multi-port AISG signal management device that enables multiple
main devices to manage an AISG link.
Prot ocol
AISG 2.0 / 3GPP
Input volt age range (V)
DC 10 - 30
Out put volt age range (V)
DC 10 - 30
Out put current range (A)
< 2.5
Power consumpt ion (W)
< 1 (single channel 12V in)
4 x 8 pin connect or accord ing t o IEC 60130-9
IN: 3 x Male / OUT: 1 x Femal e
Connectors
Pin assignment acc ording AISG
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
REU Weight (kg)
< 1.1
Packing weight (kg)
< 1.5
Operati ng temperat ure range (℃)
Lightning protection (kA)
Prot ect ion class
Mount ing
Mast diamet er (mm)
REU dimensions (L x W x H) (mm)
Packing dimensions (L x W x H)
(mm)
2.5 (10/350 s)
10 (8/20 s)
IP65
Wall mount ing / / Mast mount ing
Default : 30 - 125
174 x 150 x 48.5 (wit h connect ors, wit hout bracket s)
338x 248 x 90
Please note: The REU can work with a main device supporting AISG1.1 or AISG2.0. However, if the REU software needs to be
upgraded, t he main device must supp ort AISG2.0.
BTS port: Mal e
Male
284
ANT port: Female
Female
REU-3way
Model: AREU01301
Unit: mm
REU, BTS and Antenna Typical Connecting Diagram
ANTENNA
2
3
RET2
RET3
1
RET1
l
a
ti
g
i
D
REU
BTS1
BTS2
BTS3
NOTE
When instal li ng the REU ground cable, a copper- core cable wit h a cross-sect ional area of 6 mm² is recommended.
There are REU and hoop ir on in t he package, but not any ground cable, AISG cable or scr ews, and these need t o be
purchased additionally depending on the detail scenarios.
285
BT-690-2700-001
Model: ABT000001
Features

Used t o feed DC volt age and OOK cont rol signals int o t he
feeder cable.

Low passive intermodulation product s, low insertion l oss
and high power capacity.

Ult ra wide band design for various communicat ion syst em.

Small volume, light weight .

Support AISG 2.0 prot ocol.
BT = Bias Tee
BTS = Base Transceiver Station
OOK = On Off Keying
Block Diagram
Port 2 (ANT)
DC/OOK
RF
Block
DC
Block
Port 1 (BTS)
292
BT-690-2700-001
Model: ABT000001
Electrical Properties
Frequency range (MHz)
Insert ion loss (dB)
Isolati on for DC signal
(dB)
690 - 2700
≤
Port 1
0.1 (690 - 960 MHz // 1710 - 2690 MHz)
≤ 0.15 (960 - 1710 MHz)
Port 1
≥
70
Port 1
VSWR
Port 1 and Port 2
Input power (W)
Port 1 and Port 2
Input current (mA)
Port DC/ OOK
DC voltage reduction (V)
Port DC/OOK
≤
1.15 (690 - 960 MHz // 1710 - 2690 MHz)
≤ 1.2 (960 - 1710 MHz)
Avg. ≥ 500 (690 - 960 MHz)
Avg. ≥ 250 (1710 - 2690 MHz)
≤
≤
2300
1 (when the current i s 2300 mA)
DC suppl y volt age (V)
RF Imped ance ( Ω)
50
Int ermodulat ion product s (dBc)
< -160 (2 x 43 dBm carrier)
Environmental Specification
Operating temperature ( ℃)
-
Applicat ion scene
Indoor or out door
IP rat ing
IP66
Light ning prot ect ion (kA)
3 (10/ 350 us)
Mechanical Specification
BT Dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
48.5 x 151 x 45 (wit h connect ors)
BT net Weight (kg)
< 0.56
Packing weight (kg)
< 0.60
Port 1 (BTS)
Connectors
Port 2 (Ant enna)
Port DC/ OOK
l
a
ti
g
i
D
78 x 185 x 58
7/ 16 DIN Male
7/ 16 DIN Female
SMA Female
293
BT-690-2700-001
Model: ABT000001
Unit: mm
294
AISG ConnectingCables
For Remote Electrical Tilt (RET) System
TechnicalSpecification
2 x 8 pin connect or accord ing t o IEC 60130-9
Female / Male
Connectors
2 x 0.25 mm 2 + 4 x 0.75 mm 2 cable according t o UL2464
Cable
Rate curr ent
4A
Prot ect ion Class
IP67 (Coupled)
Temperat ure Range
-40 ~ 80 ℃
Color
Black
Single Bend radius
60 mm Min.
Mult iple Bend radius
120 mm Min.
Applicat ion scene
Indoor / / Out door
PinNumber
Signal
1
+12 V DC Nominal
2
N/ C
3
RS485 B
4
N/ C
5
RS485 A
6
10 V - 30 V DC
7
DC Ret urn
8
N/ C
Unit: mm
Cable series
Length
Model
0.5 m
AAISGCBL0
2m
AAISGCBL2
5m
AAISGCBL5
15 m
ACOAISG01
l
a
ti
g
i
D
295
AISG ConnectingCables
For Huawei RRU RET_Port
TechnicalSpecification
8 pin connect or accordi ng to IEC 60130-9
Female
Connector 1 (to be connect ed t o RET module)
Connector 2 (to be connected to Huawei
9 pin DB9 connector, water-proofed
Male
RET_port
Cable
4 Pair x 24 AWG
Rate curr ent
4A
Prot ect ion Class
IP67 (when coupled on RRU and RET)
Temperatur e Range
-40 ~ 80 ℃
Color
Black
Single Bend radius
60 mm Min.
Mult iple Bend radius
120 mm Min.
Applicat ion scene
Pin Number
Indoor or Out door
Signal
Female
Male
1
+12 V DC nominal
+12 V DC nominal
2
N/ C
N/ C
3
RS485 B
RS485 B
4
RS485 GND
RS485 GND
5
RS485 A
RS485 A
6
+12 V DC nominal
N/ C
7
DC Ret urn
N/ C
8
N/ C
N/ C
9
/
DC Ret urn
Cable series
296
Length
Model
5m
ACOAISG02
20m
AISGCC20M
Female
Male
PAA
Model: APAA00001
The port able AISG adapt er (PAA) is used f or AISG devices t o
perform management and cont rol onsite. The PAA works wit h
Bluetooth enabled smart t erminals, could support mut il- AISGst andard wit h smart t erminals soft ware, wit h soft ware upgrade
new standard can support . The PAA is light -weight ed and easy
t o carry and operate, which are suit able for sit e install ation and
maint enance. It can also be used f or systemati c management
during site deployment , and provide funct ions such as fault
location and dat a recording.
Specifications
Outp ut volt age
15 V DC 1 A (with a built - in rechargeable batt ery)
12 V DC 1 A (wit h an ext ernal AC/ DC power adapt er)
Overcurrent prot ect ion threshold
1A
Rechargeable bat t ery
Lit hium- ion bat t ery (3.7 V, 10000 mAh)
Input volt age
12 V AC/ DC power adapt er
Power adapter
Input : 100 V AC t o 240 V AC, 0.55 A, 50 Hz t o 60 Hz
Out put : 12 V DC, 2 A
Operating t emperature ( C)
- 20 t o +55
Charge temperat ure ( C)
0 t o +40
PAA dimensions (H x W x D) (mm)
30 x 204 x 88
Net weight (kg)
0.52 (wit h a built - in rechargeable batt ery, and wit hout a power
adapter)
Maximum number of RCUs (PCS)
6
Maximum lengt h of t he connection cable
(m)
100
Int erface
Bluet oot h 2.0 + EDR
°
°
Bluetooth
Fr equency r ange
2400 MHz t o 2483.5 MHz (ISM- Band)
Recei vi ng si gnal r ange
- 8 2 d Bm t o - 20 dBm (Typ ical )
Tr ansm issi on pow er
Cl ass 2 d evi ce wi t h 6 pow er cont r ol l evel s
l
a
ti
g
i
D
Certificate: CE, FCC, IC, VCCI, RCM, TELEC, REACH, RoSH, WEEE
Standards: EN60950-1, EN55022, EN55024, VCCI V-3
297
PAA
Model: APAA00001
PAA Appearance
AISG connection port
OOK connection port
Strap hole
Power supply indicator
Communication indicator
Alarm indicator
Power butt on
Mini USB port
12V DC adapt er p ort
Description
Function
AISG connection p ort
1 x 8 core female connector, c omplying wit h t he IEC 60130-9 standards
Connect s t he PAA t o an ALD using an AISG cable.
OOK connect ion port
Connect s t he PAA t o an ALD using an RF cabl e.
Power indicat or (PWR)
Indicat es t he power supply st at us.
Communication indicator (COM)
Indicates the status of communication between the PAA and smartphone.
Alarm indicat or (ALM)
Indicat es t he PAA alarms st at us.
Power but ton
Used t o power on or off t he PAA. The PAA can be powered on or off by holding d own t his
button.
Mini USB port
Reserved for furt her development and is not used t emporarily.
12 V DC adapt er p ort
Connect s t o th e AC/ DC adapt er. When an AC/ DC adapt er i s connect ed, the PAA
automatically uses the input power supply as the operating power supply to charge the
integrated battery.
1. App Installation Guidelines
Scan t he QR code on t he back of t he PAA usi ng t he
QR code scanning function of your smartphone, and
t hen downl oad t he PAA app af t er t he scanni ng i s
successful. (Some browsers may have use
r est r ict i ons and t he app cannot b e d ow nl oad ed . In
this case, try a different browser.)
This app requires Android 4.0 or later. A smartphone
wi t h a 1.2 GHz d ual - cor e CPU and 1 GB memory i s
recommended.
298
2. PAA and ALD typical connecting diagram
RS485 mode
OOK mode
Antenna Information Sensor Unit
Model: AISU00001v01
The antenna inform at ion sensor unit (AISU) is one kind of d evice that m easures engineering paramet ers of
antennas, including azimuths, mechanical t ilt s, longit ude, lat it ude, and alt it ude. It is inst alled at t he t op of t he
antenna t o perf orm GPS-based direction measurement .
The AISU belongs to t he SAA solut ion. The SAA solut ion enables users t o remot ely manage engineering
parameters of antennas in batches in real t ime using the NMS.
Azimuth Precision (°)*
±2
Mechanical Tilt Precision (°)
±0.5
Horizont al Posit ioning Precision (m)*
<6
Vert ical Posit ioning Precision (m)*
<3
Prot ocol Compliance
AISG-ES-RAE V2.1.0
Input Volt age Range (V)
10 t o 30 (DC)
Power Consumpt ion (W)
< 2.5 (@ 12 V)
Connect or
Connector Pin
8-pin male connect ors compliant wit h t he IEC 60130-9 st andard
1
2
3
4
5
6
7
8
DC
n/ c
RS-485B
n/ c
RS-485A
DC
DC ret urn
n/ c
Device Weight (kg)
0.85
Packing Weight (kg)
1.9
Operati ng Temperatur e ( °C)
-40 t o +65
Surge Prot ect ion Specificat ions (kA)
5 (8/ 20
Ingress Prot ect ion Rat ing
Device Dimensions (H x W x D) (mm)
Packing Dimensions (H x W x D) (mm)
IP65
37 x 325 x 129 (including connectors and not including mounting brackets)
100 x 470 x 187.5
* indicat es that t he item is affected by the multipat h environment, number of visible satellit es, satellit e
geometric dist ribut ion, ionospheric act iveness, and SBAS using and observat ion t ime.
AISU
l
a
ti
g
i
D
The AISU is installed at t he top of t he
antenna, as shown in the ri ght f igure.
For details about the installation
method, see the install ation guide
delivered in the package box. Any
incorrect installation method may
cause accidents or even injuries.
299
D-2.
D2. Combiner
Cat ag
ager y
Dual-band
Combiner
Max. Input
power(W)
DC-Bypass
Intermodulation
(dBm)
Dimensi on (mm)
Band 1: 690-862/
Band 2: 880-960
200
Smart
DC-Bypass
< - 117
Double
Double Unit :
103 x 196 x 143
* * ACO
ACOMD2S05v06 335
Band 1: 690-862/
Band 2: 880-960
200
690-862MHz
DC-Bypass
< - 117
Double
Double Unit :
101 x 194 x 128
* * ACO
ACOMD2L11v06 338
Band 1: 690-862/
Band 2: 880-960
200
880~960MHz
DC-bypass
< - 117
Double
Double Unit :
101 x 194 x 128
* * ACO
ACOMD2H25v06 338
Band 1: 690-862/
Band 2: 880-960
200
All
DC-bypass
< - 117
Double
Double Unit :
101 x 194 x 128
* * ACO
ACOMD2A07v06 338
Band 1: 690-803/
Band 2: 824-960
300
690~803MHz
DC-bypass
< - 112
Double
Double Unit :
200 x 230 x 107
ACOMD2L08v06
341
Band 1 : 698-960/
Band 2: 1710-2200
300
1710~2200MHz
DC-bypass
< - 110
Double
Double Unit :
130 x 190 x 105
ACOMD2H11v06
344
Band 1: 698-960 /
Band 2: 1710-2200
300
All
DC-bypass
< - 110
Double
Double Unit :
130 x 190 x 105
ACOMD2H19v06
344
Band 1: 698-960 /
Band 2: 1710-2700
300
1710~2700MHz
DC-bypass
< - 110
Double
Double Unit :
130 x 190 x 105
ACOMD2H00v06
347
Band 1: 698-960/
Band 2: 1710-2700
300
All
DC-bypass
< - 110
Double
Double Unit :
130 x 190 x 105
ACOMD2H22v06
347
Band 1: 1427-1880 /
Band 2: 1920-2200
200
Smart
DC-bypass
< - 117
Double
Double Unit :
131 x 120 x 109
* * ACO
ACOMD2S02v06 350
Band 1: 1427-1880 /
Band 2: 1920-2200
200
1920~2200MHz
DC-bypass
< - 117
Double
Double Unit :
131 x 120 x 94
* * ACO
ACOMD2H26v06 353
Band 1: 1427-1880 /
Band 2: 1920-2200
200
All
DC-bypass
< - 117
Double
Double Unit :
131 x 120 x 94
* * ACO
ACOMD2A06v06 353
Band 1: 17101755&2110-2155/
Band 2: 1850-1995
300
All
DC-bypass
< - 110
Double
Double Unit :
185 x 180 x 103
Band 1: 1427-2200/
Band 2: 2300-2690
200
1427~2200MHz
DC-bypass
< - 117
Double
Double Unit :
122 x 125 x 98
* * ACO
ACOMD2L13v06 359
Band 1: 1427-2200/
Band 2: 2300-2690
200
2300-2690MHz
DC-bypass
< - 117
Double
Double Unit :
122 x 125 x 98
* * ACO
ACOMD2H27v06 359
Band 1: 1427-2200/
Band 2: 2300-2690
200
All
DC-bypass
< - 117
Double
Double Unit :
122 x 125 x 98
* * ACO
ACOMD2A08v06 359
Pass Ba
Band (M
(M Hz
Hz)
Model
ACOMD2A00v06
Page
356
r
e
in
b
m
o
C
Pass Ba
Band (M
(M Hz
Hz)
Max. Input
power(W)
DC-Bypass
Intermodulation
(dBm)
Dimension (mm)
Model
Page
Band 1: 1427-2200/
Band 2: 2300-2690
200
Smart
DC-bypass
< - 117
Double
Double Unit :
122 x 125 x 98
* * ACO
ACOMD2S03v06
362
Band 1: 790-862/
Band 2: 880-960/
Band 3: 1710-2200
300
All
DC-bypass
< - 110
Double
Double Unit :
220 x 210 x 115
ACOMT2H04v06
365
Band 1: 790-862/
Band 2: 880-960/
Band 3: 1710-2700
300
All
DC-bypass
< - 110
Double
Double Unit :
220 x 210 x 115
ACOMT2A02v06
368
Band 1: 790-960/
Band 2: 1710-1880/
Band 3: 1920-2200
300
1920~2200MHz
DC-bypass
< - 110
Double
Double Unit :
190 x 154 x 105
ACOMT2H01v06
371
Band 1: 790-960/
Band 2: 1710-1880/
Band 3: 1920-2200
300
1710~1880MHz
DC-bypass
1920~2200MHz
DC-bypass
< - 110
Double
Double Unit :
190 x 154 x 105
ACOMT2H03v06
371
Band 1: 790-960/
Band 2: 1710-1880/
Band 3: 1920-2200
300
ALL
DC-bypass
< - 110
Double
Double Unit :
190 x 154 x 105
ACOMT2H08v06
371
Band 1: 690-960/
Band 2: 1710-1880/
Band 3: 1920-2200
300
All
DC-bypass
< - 110
Double
Double Unit :
190 x 154 x 105
ACOMT2A03v06
374
Band 1: 690-960/
Band 2: 1710-2200/
Band 3: 2300-2690
300
All
DC-bypass
< - 110
Double
Double Unit :
196 x 190 x 112
ACOMT2A04v06
377
Quad-band
Combiner
Band 1: 690-960/
Band 2: 1710-1880/
Band 3: 1920-2200/
Band 4: 2300-2690
300
All
DC-bypass
< - 110
Double
Double Unit :
230 x 220 x 112
ACOMQ2A01v06
380
DC- STOP
Band : 690- 2700
500
DC- St op
< - 117
32 x 70.3 x 37
ADCSTOP00v06
383
Cat ag
ager y
Dual-band
Combiner
Tri-band
Combiner
* * Pre
Preliminary
liminary Issue
Issue
DCC-69
6900-86
862/
2/880
880-- 960
960-- DS
Model: ACOMD2S05v0
MD2S05v06
6
Preliminary Issue
Product
Prod
uct Desc
Descripti
ription
on

Smartl y select
select t he DC
DC/ AISG
ISG channel, and t he combiner
module or
or t he demult
demult iplexingmodule is t he same
same module;

Can be used as a combiner
combi ner near t he BTS
BTS or in a recip rocal
funct ion near
near t he antenna;
antenna;

Support f or customer-defined configuration with handheld
handheld
terminal;

Designed
esigned for co-l ocation pur poses;

Feeder
Feeder sharing
shari ng availabl
availabl e;

Built- in light ning protection up t o 10 kA;
kA;

Suit able for indoor
indoor or outdoor applications.

Wall or mast mount ing.
Block Diagram
Port 3
G
S
I
A
/
C
D
s
s
a
p
y
B
rt
a
m
S
Port 1
Port 2
690-862
880-960
r
e
n
i
b
m
o
C
335
DCC-69
6900-86
862/
2/880
880-- 960
960-- DS
Model: ACOMD2S05v0
MD2S05v06
6
Electrical
Electrical Properties
Properties
Mod el
ACOM D2S05v06
Band 1
690 - 862
Band 2
880- 960
Pass band (MHz)
Port 1
< 0.2 (690 MHz - 862 MHz)
Port 2
< 0.25 (880 MHz - 960 MHz)
Port 1
Smart bypass (max.
(max. 2500 mA)
Port 2
Smart bypass (max.
(max. 2500 mA)
Insertion
Insertion loss*
loss* (dB)
(dB)
DC/
DC/ AISG
transparency
Isol at i on (d B)
> 50
VSWR
< 1.28
Inp ut p ow er (W)
Por t 1, Por t 2
< 200
Int er m od ul at i on pr
pr od uc t s (d Bc )
< - 160 (3r d or d er ; wi t h 2 x 43 d Bm )
Environme
Environmental
ntal Specification
Specification
Operating temperature (℃)
-
Ap p l i c at i on s c ene
Ind oor / / Out d oor
IP r at i ng
IP67
Li ght ni ng p r ot ec t i on* * (k A)
10 (8/ 20 us)
Mechanical
Mechanical Specification
Specification
Double Unit 103 x 196 x 143
(without connect
connect ors, without mounti
mounti ng brackets)
brackets)
：
Combi ner d imens ions (W x H x D)
D) (mm)
Pac k i ng d i m ensi ons (W x H x D) (m m )
380 x 160 x 240
Com b i ner w ei ght (k g)
Doub l e Uni t :
Packi
Packi ng weight (kg)
≤
Mount i ng
≤
5.5
6
Wal l mount i ng / / M ast m ount i ng
Mast d i am et er (m m)
40 - 135
Connec t or
4. 3- 10 Femal e
Function
Function Specification
Specification
Mod e c hoi c e
Com b i ne and sp l i t m od e aut om at i c al l y sel ec t ed
Smar t DC/ AISG b yp ass
DC/ AISG i np ut c hannel aut om at i c al l y sel ec t ed
Load d et ec t i on
*Insert ion loss:
IL*
Out p ut l oad aut om at i c al l y d et ec t ed

Sum(v1  v2  ....  vn)
n
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every
every 5 MHz in the passband
passband
from low t o high frequencies. Vn is the insertion loss value for the highest frequency.
If n is less than 4, calculate using the foll owing formula:
IL 
IL
 2  IL
Min.Frequency
Mid. Frequency
4

IL
Max. Frequency
** Lightning prot ection: Generally,
Generally, combiners share t he same grounding
grounding system wit h f eeders,
eeders, and no separate
separate PGND
PGND cable
cable is requir ed.
336
DCC-69
6900-86
862/
2/880
880-- 960
960-- DS
Model: ACOMD2S05v0
MD2S05v06
6
r
e
n
i
b
m
o
C
337
DC-690DC690-862/880862/880-960960-11
11 Model:
Model: ACOMD
ACOMD2A0
2A07v0
7v06
6
DC-690DC690-862/880862/880-960960-10
10 Model:
Model: ACOMD
MD2L11v
2L11v06
06
DC-690DC690-862/880862/880-960960-01
01 Model:
Model: ACOMD
ACOMD2H25
2H25v06
v06
Preliminary Issue
Product
Prod
uct Desc
Descripti
ription
on


Built- in lightning prot
prot ection up to 10 kA.
kA.
Can be used as a combiner
combi ner near t he BTS
BTS or in a recip rocal
funct ion near
near t he antenna.
antenna.

Designed
esigned for co-l ocation purposes.

Feeder
Feeder sharing
shari ng availabl
availabl e.

Suit able for indoor
indoor or outdoor applicat
applicat ions.

Wall or mast mounting.
Block Diagram
Port3
s
s
a
p
y
B
G
IS
A
/
C
D
s
s
a
p
y
B
G
IS
A
/
C
D
Port1
Port2
690-862
880-960
ACOMD2A07v06
338
ACOM D2L11v06
ACOM D2H25v06
DC-690DC690-862/880862/880-960960-11
11 Model:
Model: ACOMD
ACOMD2A0
2A07v0
7v06
6
DC-690DC690-862/880862/880-960960-10
10 Model:
Model: ACOMD
MD2L11v
2L11v06
06
DC-690DC690-862/880862/880-960960-01
01 Model:
Model: ACOMD
ACOMD2H25
2H25v06
v06
Electrical
Electrical Properties
Properties
Mod el
ACOMD2A07v06
Pass band
(MHz)
Insert
Insert ion l oss*
(dB)
DC/
DC/ AISG
transparency
ACOM D2L11v06
Band 1
690 - 862
Band 2
880 - 960
Port 1
< 0.2 (690 MHz - 862 MHz)
Port 2
< 0.25 (880 MHz - 960 MHz)
ACOM D2H25v06
Port 1
By- pass (max.
(max. 2500 mA)
By- pass (max.
(max. 2500 mA)
st op
Por t 2
By- p ass (m ax. 2500 m A)
st o
op
p
By- p ass (m ax. 2500 m A)
Isol at i on (d B)
> 50
VSWR
< 1.28
Input power
(W)
(W)
Por t 1, Por t 2
< 200
Int er m od ul at i on p
prr od uc t s (d Bc )
< - 160 (3
(3r d or d er ; w i t h 2 x 43 d Bm)
Environme
Environmental Specification
Specification
Operating temperature (℃)
-
Ap p l i c at i on s c ene
Ind oor / / Out d oor
IP r at i ng
IP67
Li ght ni ng p r ot ec t i on* * (k A)
10 (8/ 20 us)
Mechanical
Mechanical Specification
Specification
Combi ner d imens ions (W x H x D)
D)
(mm)
Double Unit ： 101 x 194 x 128
(without connect
connect ors, without mounti
mounti ng brackets)
brackets)
Pac k i ng d i m ensi ons (W x H x D) (m m)
380 x160 x 240
Com b i ner w ei ght (k g)
Doub l e Uni t :
Packi
Packi ng weight (kg)
≤
Mount i ng
5.5
6.5
Wal l mount i ng / / M ast m ount i ng
Mast d i am et er (m m)
40 - 135
Connec t or
*Insert ion loss:
≤
4.3- 10 Fem al e
IL*

Sum(v1  v2  ....  vn)
n
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every
every 5 MHz in the passband
passband
from low t o high frequencies. Vn is the insertion loss value for the highest frequency.
If n is less than 4, calculate using the foll owing formula:
IL 
IL
 2  IL
Min.Frequency
Mid. Frequency
4

r
e
n
i
b
m
o
C
IL
Max. Frequency
** Lightning prot ection: Generally,
Generally, combiners share t he same grounding
grounding system wit h f eeders,
eeders, and no separate
separate PGND
PGND cable
cable is requir ed.
339
DC-690DC690-862/880862/880-960960-11
11 Model:
Model: ACOMD
ACOMD2A0
2A07v0
7v06
6
DC-690DC690-862/880862/880-960960-10
10 Model:
Model: ACOMD
MD2L11v
2L11v06
06
DC-690DC690-862/880862/880-960960-01
01 Model:
Model: ACOMD
ACOMD2H25
2H25v06
v06
■
If t he sign as shown above,
it i ndicates this pass band
band
is DC stop.
340
If t he sign as shown above,
above,
it i ndicates this pass band
band
is DC pass.
DC-690-803/824-960-10
Model: ACOMD2L08v06
Product Description


Built- in lightning prot ection up to 10 kA.
Can be used as a combiner near t he BTS or in a reciprocal
funct ion near t he antenna.

Designed for co-l ocation purposes.

Feeder sharing availabl e.

Suit able for indoor or outdoor applicat ions.

Wall or mast mounting.
Block Diagram
r
e
n
i
b
m
o
C
341
DC-690-803/824-960-10
Model: ACOMD2L08v06
Electrical Properties
Model
ACOMD2L08v06
Band 1
690 - 803
Band 2
824 - 960
Pass band (MHz)
Port 1
< 0.45 (690 MHz - 803 MHz)
Port 2
< 0.45 (824 MHz - 960 MHz)
Port 1
By-pass (max. 2500 mA)
Port 2
Stop
Insert ion loss * (dB)
DC/ AISG
transparency
Isolat ion (dB)
> 49.0
VSWR
< 1.22
Input power (W)
Port 1, Port 2
< 300
Int ermodulat ion product s (dBc)
< -155 (3rd order; wit h 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-
Applicat ion scene
Indoor / / Out door
IP rat ing
IP67
Light ning prot ect ion* * (kA)
10 (8/ 20 us)
Mechanical Specification
Double Unit: 200 x 230 x 107
(without connectors, wit hout mounti ng brackets)
Combi ner d imens ions (W x H x D) (mm)
Packin g dim ensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit : ≤ 7.9
Packi ng weight (kg)
≤
Mount ing
Wall mount ing / / Mast mount ing
Mast diamet er (mm)
40 - 135
Connect or
*Insert ion loss:
9.4
4.3-10 Female
IL*

Sum(v1  v2  ....  vn)
n
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the passband
from low t o high frequencies. Vn is the insertion loss value for the highest frequency.
If n is less than 4, calculate using the foll owing formula:
IL 
IL
 2  IL
Min.Frequency
Mid. Frequency
4

IL
Max. Frequency
** Lightning prot ection: Generally, combiners share t he same grounding system wit h f eeders, and no separate PGND cable is requir ed.
342
DC-690-803/824-960-10
Model: ACOMD2L08v06
M8
If t he sign as shown
above, it indicates t his
pass band is DC by- pass.
If t he sign as shown
above, it indicates t his
pass band i s DC st op.
Unit : mm
r
e
n
i
b
m
o
C
343
DC-698-960/1710-2200-01 Model: ACOMD2H11v06
DC-698-960/1710-2200-11 Model: ACOMD2H19v06
Product Description


Built- in lightning prot ection up to 10 kA.
Can be used as a combiner near t he BTS or in a reciprocal
funct ion near t he antenna.

Designed for co-l ocation purposes.

Feeder sharing availabl e.

Suit able for indoor or outdoor applicat ions.

Wall or mast mounting.
Block Diagram
ACOMD2H11v06
344
ACOMD2H19v06
DC-1427-1880/1920-2200-11 Model: ACOMD2A06v06
DC-1427-1880/1920-2200-10 Model: ACOMD2L12v06
DC-1427-1880/1920-2200-01 Model: ACOMD2H26v06
M8
■
If t he sign as shown above,
it i ndicates this pass band
is DC stop.
If t he sign as shown above,
it indicates this pass band
is DC pass.
r
e
n
i
b
m
o
C
355
DC-1710-1755&2110-2155/1850-1995-11
Model: ACOMD2A00v06
Product Description


Built- in lightning prot ection up to 10 kA.
Can be used as a combiner near t he BTS or in a reciprocal
funct ion near t he antenna.

Designed for co-l ocation purposes.

Feeder sharing availabl e.

Suit able for indoor or outdoor applicat ions.

Wall or mast mounting.
Block Diagram
356
DC-1710-1755&2110-2155/1850-1995-11
Model: ACOMD2A00v06
Electrical Properties
Model
ACOMD2A00v06
Band 1 (AWS)
1710 - 1755 & 2110 - 2155
Band 2 (PCS)
1850 -1995
Pass band (MHz)
Port 1
< 0.3 (1710 MHz - 1755 MHz & 2110 MHz - 2155 MHz)
Port 2
< 0.3 (1850 MHz - 1995 MHz)
Port 1
By - pass (max. 2500 mA)
Port 2
By - pass (max. 2500 mA)
Insertion loss* (dB)
DC/ AISG
transparency
Isolat ion (dB)
> 35
VSWR
< 1.25
Input power (W)
Port 1, Port 2
< 300
Int ermodulat ion product s (dBc)
< -153 (3rd order; wit h 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-
Applicat ion scene
Indoor / / Out door
IP rat ing
IP67
Light ning prot ect ion* * (kA)
10 (8/ 20 us)
Mechanical Specification
Double Unit : 185 x 180 x 103
(without connectors, without mounti ng brackets)
Combi ner d imens ions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
260 x 380 x 215
Combiner weight (kg)
Double Unit :
Packi ng weight (kg)
≤
Mount ing
6.8
7.7
Wall mount ing / / Mast mount ing
Mast diamet er (mm)
40 - 135
Connect or
*Insert ion loss:
≤
4.3-10 Female
IL*

Sum(v1  v2  ....  vn)
n
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the passband
from low t o high frequencies. Vn is the insertion loss value for the highest frequency.
If n is less than 4, calculate using the foll owing formula:
IL 
IL
 2  IL
Min.Frequency
Mid. Frequency
4

r
e
n
i
b
m
o
C
IL
Max. Frequency
** Lightning prot ection: Generally, combiners share t he same grounding system wit h f eeders, and no separate PGND cable is requir ed.
357
DC-1710-1755&2110-2155/1850-1995-11
Model: ACOMD2A00v06
M6
If t he sign as shown
above, it indicates t his
pass band is DC by- pass.
If t he sign as shown
above, it indicates t his
pass band is DC st op.
Unit : mm
358
DC-1427-2200/2300-2690-DS
Model: ACOMD2S03v06
Preliminary Issue
Product Description

Built- in light ning protection up t o 10 kA;

Can be used as a combiner near the BTS or in a recipr ocal f unct ion
near the antenna;

Aut omat ically recognizes t he port DC / AISG, and t he combiner module
or t he demult iplexing module is t he same module;

Support f or customer-defined configurat ion with handheld terminal;

Designed for co- locat ion purposes;

Feeder shari ng availabl e;

Suit able for indoor or out door applications.

Wall or mast mounting.
Block Diagram
1427-2200
362
2300-2690
DC-1427-2200/2300-2690-DS
Model: ACOMD2S03v06
Electrical Properties
Model
ACOMD2S03v06
Band 1
1427 - 2200
Band 2
2300 - 2690
Pass band (MHz)
Port 1
< 0.15 (1427 - 2200)
Port 2
< 0.15 (2300 - 2690)
Port 1
Smart- bypass (max. 2000 mA)
Port 2
Smart- bypass (max. 2000 mA)
Port 1
> 50
Insert ion loss* (dB)
DC/AISG transparency
Isolat ion (dB)
VSWR
< 1.28
Input power (W)
Port 1, Port 2
< 200
Int ermodulat ion product s (dBc)
< -160 (3rd order; wit h 2 x 43 dBm)
Environmental Specification
Operating temperature ( ℃)
-
Applicat ion scene
Indoor / / Out door
IP rat ing
IP67
Light ning prot ect ion* * (kA)
10 (8/ 20 us)
Mechanical Specification
Double Unit: 122 x 125 x 111
(without connectors, without mounti ng brackets)
Combi ner d imensi ons (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
185 x 280 x 195
Combiner weight (kg)
Double Unit :
Packing weight (kg)
≤
Mount ing
≤
3.5
4.8
Wall mount ing / / Mast mount ing
Mast diamet er (mm)
40 - 135
Connect or
4.3-10 Female
Function Specification
Mode choice
Combine and split mode aut omat ically select ed
Smart DC/ AISG bypass
DC/ AISG input channel aut omat ically select ed
Load det ect ion
*Insert ion loss:
IL*
Out put load aut omat ically det ect ed

Sum(v1  v2  ....  vn)
n
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the passband
r
e
n
i
b
m
o
C
from low t o high frequencies. Vn is the insertion loss value for the highest frequency.
If n is less than 4, calculate using the foll owing formula:
IL 
IL
 2  IL
Min.Frequency
Mid. Frequency
4

IL
Max. Frequency
** Lightning prot ection: Generally, combiners share t he same grounding system wit h f eeders, and no separate PGND cable is requir ed.
363
DC-1427-2200/2300-2690-DS
Model: ACOMD2S03v06
364
TC-790-862/880-960/1710-2200-111
Model: ACOMT2H04v06
Product Description


Built- in lightning prot ection up to 10 kA.
Can be used as a combiner near t he BTS or in a reciprocal
funct ion near t he antenna.

Designed for co-l ocation purposes.

Feeder sharing availabl e.

Suit able for indoor or outdoor applicat ions.

Wall or mast mounting.
Block Diagram
r
e
n
i
b
m
o
C
365
TC-690-960/1710-1880/1920-2200-111
Model: ACOMT2A03v06
Electrical Properties
Model
ACOMT2A03v06
Pass band (MHz)
Insertion loss* (dB)
DC/ AISG
transparency
Band 1
690 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Port 1
< 0.15 (690 MHz - 960 MHz)
Port 2
< 0.25 (1710 MHz - 1880 MHz)
Port 3
< 0.25 (1920 MHz - 2200 MHz)
Port 1
By-pass (max. 2500 mA)
Port 2
By-pass (max. 2500 mA)
Port 3
By-pass (max. 2500 mA)
Isolat ion (dB)
> 45
VSWR
< 1.28
Port 1, Port 2,
Port3
Input power (W)
< 300
Int ermodulat ion product s (dBc)
< -153 (3rd order; wit h 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-
Applicat ion scene
Indoor / / Out door
IP rat ing
IP67
Light ning prot ect ion* * (kA)
10 (8/ 20 us)
Mechanical Specification
Double Unit: 190 x 154 x 105
(without connect ors, without mounti ng brackets)
Combi ner d imens ions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
245 x 330 x 220
Combiner weight (kg)
Double Unit :
Packi ng weight (kg)
≤
Mount ing
7.0
7.9
Wall mount ing / / Mast mount ing
Mast diamet er (mm)
40 - 135
Connect or
*Insert ion loss:
≤
4.3-10 Female
IL*

Sum(v1  v2  ....  vn)
n
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the passband
from low t o high frequencies. Vn is the insertion loss value for the highest frequency.
If n is less than 4, calculate using the foll owing formula:
IL 
IL
 2  IL
Min.Frequency
Mid. Frequency
4

IL
Max. Frequency
r
e
n
i
b
m
o
C
** Lightning prot ection: Generally, combiners share t he same grounding system wit h f eeders, and no separate PGND cable is requir ed.
375
TC-690-960/1710-1880/1920-2200-111
Model: ACOMT2A03v06
M8
If t he sign as shown
above, it indicates t his
pass band is DC by- pass.
If t he sign as shown
above, it indicates t his
pass band is DC st op.
Unit : mm
376
TC-690-960/1710-2200/2300-2690-111
Model: ACOMT2A04v06
Product Description


Built- in lightning prot ection up to 10 kA.
Can be used as a combiner near t he BTS or in a reciprocal
funct ion near t he antenna.

Designed for co-l ocation purposes.

Feeder sharing availabl e.

Suit able for indoor or outdoor applicat ions.

Wall or mast mounting.
Block Diagram
Port4
s
s
a
p
y
B
G
S
I
/A
C
D
s
s
a
p
y
B
G
S
I
/A
C
D
s
s
a
p
y
B
G
S
I
A
/
C
D
Port1
Port2
Port3
690 - 960
1710 - 2200
2300 - 2690
r
e
n
i
b
m
o
C
377
TC-690-960/1710-2200/2300-2690-111
Model: ACOMT2A04v06
Electrical Properties
Model
ACOMT2A04v06
Pass band (MHz)
Insertion loss* (dB)
DC/ AISG
transparency
Band 1
690 - 960
Band 2
1710 - 2200
Band 3
2300 - 2690
Port 1
< 0.15 (690 MHz - 960 MHz)
Port 2
< 0.2 (1710 MHz - 2200 MHz)
Port 3
< 0.2 (2300 MHz - 2690 MHz)
Port 1
By-pass (max. 2500 mA)
Port 2
By-pass (max. 2500 mA)
Port 3
By-pass (max. 2500 mA)
Isolat ion (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port 3
< 300
Int ermodulat ion product s (dBc)
< -153 (3rd order; wit h 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-
Applicat ion scene
Indoor / / Out door
IP rat ing
IP67
Light ning prot ect ion (kA)
10 (8/ 20 us)
Mechanical Specification
Double Unit: 196 x 190 x 112
(without connectors, without mounti ng brackets)
Combi ner d imens ions (W x H x D) (mm)
Packin g dim ensions (W x H x D) (mm)
335 x 405 x 265
Combiner weight (kg)
Double Unit : ≤ 7.0
Packi ng weight (kg)
≤
Mount ing
Wall mount ing / / Mast mount ing
Mast diamet er (mm)
40 - 135
Connect or
*Insert ion loss:
7.9
4.3-10 Female
IL*

Sum(v1  v2  ....  vn)
n
, V1, V2 through Vn-1 are insertion loss values at points for spacing of every 5 MHz in the passband
from low t o high frequencies. Vn is the insertion loss value for the highest frequency.
If n is less than 4, calculate using the foll owing formula:
IL 
IL
 2  IL
Min.Frequency
Mid. Frequency
4

IL
Max. Frequency
** Lightning prot ection: Generally, combiners share t he same grounding system wit h f eeders, and no separate PGND cable is requir ed.
378
Clamps Kit-G
Kit- G for Panel
Panel Antennas
Antennas
Model: ASMC00016
Type
Mast diame
diameter
ter supported
(mm)
Weight
(Approx.kg)
Material
Cl amp s Ki t - G
75 - 115
10.8
All parts: Hot-di p galvanized
galvanized steel
Bolt
Bolt s / nuts / washers:
washers: Stainless
Stainless steel
Unit: mm
NOTE
Clamps kit must be combined with corresponding
corresponding models
models of clam for antenna
antenna install ation.
Installati on must f ollow t he antenna
antenna install ation guide within antenna package
package..
398
Extension Clamps
Clamps Kit- B for Panel
Panel An
Antenn
tennas
as
Model: ASMC00006
Mast diameter
supported (mm)
Net weight
(kg)
Packing weight
(kg)
Packing dimensions
dimensions
(H x W x D) (mm)
Material
110 - 180
3.7
4.0
255 x 165 x 120
All part s: HotHot- dip galvanized
galvanized steel
Bolts / nuts / washers:
washers: Stainless
Stainless steel
68
0
2
4- Φ9
The expand
expand i nterf ace
for Clamps
Clamps Kit- F
110.5
50
0
7
0
6
1
The expand
interf ace for
Clamps Kit- A
194
2- Φ9
2- Φ6.5
The
The expand int erface
for Clamps
Clamps KitKit- B ,
Clamps Ki t- C and
Clamps Kit- D
35
68
22
8
Unit: mm
NOTE
Clamps kit must be combined with corresponding
corresponding models
models of clam for antenna
antenna install ation.
Installati on must f ollow t he antenna
antenna install ation guide within antenna package
package..
&
t
e
k
c
a
r
B
399
e
d
i
u
G
n
io
t
a
ll
a
t
s
In
Wall
all-- mo
mounting
unting Kit
Kit-- A Hardw
Hardware
are
Model: ASMWM0001


Suit
Suit able for all panels
panels wit h an antenna housing
housing width (Wmax ) less t han 400 mm.
Not support antennas with brackets of model F or
or above.
above.
Wall
all Mounting
Mounting Hardware
Hardware
Azimuth adjustment range ( )
±30
Wmax (m m )
400
Maxi m um wei ght of ant enna (k g)
35
°
Numb er of p i ec es
2
Wei ght (k g)
4.3
Sheet M et al
Material
Hot - d i p gal vani zed st eel
Screws
Stainless steel
Nuts
Ø12
Angular:
Angular: 0
°
Angular:
Angular: 30
°
Unit: mm
NOTE
The expansion bolts for concrete wall mounting are provided, other wall mounting screws are not supplied, they
must be chosen
chosen by inst aller according t o the mounting condition.
400
Antenna
An
tenna with Type A Brackets Instal
Installlation Guide
Installation Tools
Clamps
Downtilt kit (Optional)
Torque
Torque wrench
Inclinometer
13 mm combinat
combinat ion
wrenc h (2 PCS)
M8
(4 PCS)
(2 PCS)
(2 PCS)
ASMDT0A01
(1 PCS)
Installation without
without Dow
Downtilt
ntilt Kit
1
Assemble
Assemble the Clamp
Clamps
s
2 PCS
2
Install the Clamps
Clamps
The same install ation met hod applies to
both upper and lower brackets.
3
Install
Install the antenna
antenna
The mecha
mechanical
nical downtilt of
the antenna is fixed to 0 °
and cannot
cannot be adjusted.
The same
same install ation met hod applies to both upper and
lower brackets.
Check and tighten all the nut s when the inst allati on is
complete. The recommended
recommended t orque M8 is 18 N·m
&
t
e
k
c
a
r
B
401
e
d
i
u
G
n
io
t
a
ll
a
t
s
In
Installation with
with Dow
Downtilt
ntilt Kit
1
Assembl
Assemble the bracket
Disasse
Disassemble
mble clamps and downtilt
downtilt kit .
The packaging box
contains two
clamps. Just need
disassemble one of
them.
Assemble the upper bracket
Protrusion
Protrusion
The side of
of t he downtilt
downtilt kit w ith a protrusion is
outside.
Protrusion
Insert
Insert the bolt fr om the side with t he protrusion.
protrusion.
Assemble the lower bracket
402
Insert
Insert the bolt from t he side
side with t he
Protrusion.
2
Install the bracket
bracket
3
Install
Install the antenna
antenna
Tighten
Tighten all t he nuts before
lifting the antenna onto
the tower. Ensure the
bracket
bracket is fully f olded.
olded.
The same install ation met hod applies to both upper and
lower brackets.
4
Adjust the mechanical
mechanical downtilt
ntilt
Method 1: Using a scale pl ate
The lett er "L" on the scale plat e indicates
the dist ance between antenna bases.
bases.
Determi
Determi ne the value that is closest to the
actual distance. if the distance is
approximate
approximate 1.4 m, observe the readings
L
The scale pl ates
may vary with
different t ypes
ypes of
downtilt
downtilt kit. The
The
scale plate shown in
the right f igure is
only for reference.
Method 2: Using an
an incl inometer
Example of a
scale plate
Scale plate
Tighten
Tighten t he
upper bracket.
Before
Before the adjustment, adjust the
inclinometer
inclinometer t o the desired
desired downtilt .
After the adjustment, locate the bead in
the middle of the inclinometer.
Tighten
Tighten t he
lower bracket.
Finally, t ighten all t he nuts. The
The recommended
recommended torq ue M8 is 18 N·m
&
t
e
k
c
a
r
B
403
e
d
i
u
G
n
io
t
a
ll
a
t
s
In
Antenna
An
tenna with Type B and TypeC Brackets
Brackets Instal
Installlation Guide
Downtilt kit (Optional)
Clamps
Installation Tools
(1 PCS)
13 mm combination
wrenc h (2 PCS)
PCS)
(2 PCS)
(1 PCS)
16 mm combination
wrenc h (2 PCS)
PCS)
Inclinometer
Torque wrench
ASMDT0B01
or
M10
(4 PCS)
M10
(2 PCS)
ASMDT0C01
M8
(4 PCS)
(1 PCS)
Installation without
without Dow
Downtilt
ntilt Kit
1
Assemble
Assemble the clamp
clamps
s
Assembl
Assembl e t he 2 PCS
PCS clamps.
Ensure
Ensure that the bolt head
head
and the protrusion always
reside on the same side.
2
Install the clamps
clamps
Keep the arrows upwards.
M8
The same installat ion method applies t o
both upper and lower bracket s. And
tight en the nut s. The recommended
torque M8 is 18 N·m.
404
(1 PCS)
3
Install
Install the antenna
antenna
The mechanical
downtilt
downtilt of the
antenna is fixed
t o 0° and
cannot be
adjusted.
The same install ation met hod applies
to both upper and lower brackets.
Install and tighten the nuts. The
recommended t orque M10 is 40 N·m.
Check
Check and tight en all the nuts w hen
the installation is complete. The
operating torques are given in the
following figures.
M10 =
40 N·m
Installation with
with Dow
Downtilt
ntilt Kit
1
Assemble
Assemble the bracket
Disasse
Disassemble
mble the downtilt kit.
Assemble
Assemble t he lower bracket.
Assembl
Assembl e t he upper bracket
Protrusion
Label
Follow
Follow t he patt
patt ern on the label to select installation parts.
Protrusion
Label
Follow
Follow t he patt
patt ern on the label
label t o select
select inst allation parts.
&
t
e
k
c
a
r
B
405
e
d
i
u
G
n
io
t
a
ll
a
t
s
In
2
Install the bracket
The same installat ion method applies t o both upper
and lower brackets.
Tighten t he nuts. The recommended t orque M8 is 18
N·m.
Keep the arrows upwards.
3
Install the antenna
Tighten all t he
nuts before lift ing
the antenna onto
the t ower. Ensure
the bracket is
fully folded.
The same install ation met hod applies to
both upper and lower brackets.
4
Install and tight en the nuts. The recommended
torque M10 is 40 N·m.
Adjust the mechanical downtilt
Exampl e of a
scale plate
Scale
plate
Method 1: Using a scale pl ate
The lett er "L" on t he scale plate indicates
the dist ance between antenna bases.
Determine the value that is closest to the
actual distance. If the distance is
approximately 1.4 m, observe the
readings corresponding to "L=1.4 m".
L
The scale pl ates may
vary with dif ferent
types of downtilt kit.
The scale pl ate shown
in the right f igure is
only for reference.
Method 2: Using an inclinometer
Tight en the
upper bracket
Before the adjustment, adjust t he
inclinometer to the desired downtil t.
After t he adjustment, locate the bead in
the middl e of t he inclinometer.
Tight en the
lower bracket .
Loosen all t he nuts as shown
in the fi gure to adjust the
downtilt . After the
adjustment is complete,
tighten all the nuts.
Check the component shape
and the positi on of screws
before the adjustment.
Strictly the operating torques
given in the f ollowing figures
must be used.
406
Recommended t orque M10 = 40N·m
Antenna
An
tenna with Type D Brack
Brackets
ets Install
Installation
ation Guide
Guide
Clamps
Installation Tools
Downtilt kit (Optional)
PCS)
(1 PCS)
(1 PCS)
PCS)
13 mm combination
wrench (2 PCS)
16 mm combination
wrench (2 PCS)
(2 PCS)
Inclinometer
Torque wrench
M10 x 150
(4 PCS)
M10 x 110
(1 PCS)
(1 PCS)
ASMDT0D01
(1 PCS)
Installation without
without Dow
Downtilt
ntilt Kit
1
Assemble
Assemble the clamp
clamps
s
Assemble 2 PCS clamps.
2
Install the clamps
clamps
The same install ation met hod applies to both upper and
lower brackets.
Tighten
Tighten t he nuts. The recommended t orque M8 is 18 N·m.
Keep
Keep t he arrows upwards .
&
t
e
k
c
a
r
B
407
e
d
i
u
G
n
io
t
a
ll
a
t
s
In
3
Install
Install the antenna
antenna
The
mechanical
downtil
downtiltt of
the antenna is
fixed t o 0°
and cannot be
adjusted.
The same install ation met hod applies
to both upper and lower brackets.
Install and tight en the nuts. The recommended
torque M10 is 40 N·m .
Check and tighten all the nut s
when the installation is complete.
The operating torques are given in
the following figures.
M10 = 40
N·m
Installation with
with Dow
Downtilt
ntilt Kit
1
Assemble
Assemble the bracket
Disasse
Disassemble
mble the downtilt kit.
Assemble the lower bracket.
Assemble
Assemble t he upper
upper bracket .
Label
Follow the patt
patt ern on the label to select
installation parts.
Tighten the nuts.
Label
Foll
Foll ow the patt ern on
on the label to select
installation parts.
408
Tighten the nuts.
2
Install the bracket
bracket
The
The same
same instal lation method applies t o both upper
and lower brackets.
Tighten
Tighten t he nuts. The recommended t orque M8 is 18
N·m.
Keep the arrows upwards.
3
Install
Install the antenna
antenna
Tighten
Tighten all t he nuts
before lifting the
antenna onto the
tower. Ensure the
bracket
bracket is fully
folded.
The same install ation met hod applies
to both upper and lower brackets.
4
Install and tighten the nuts. The
recommended t orque M10 is 40 N·m.
Adjust the mechanical
mechanical downtilt
ntilt
Exampl
Exampl e of a
scale plate
Scale
plate
Method 1: Using a scale
scale pl ate
The lett er "L" on t he scale plate indicates
the dist ance between antenna bases.
Determine the value that is closest to the
actual distance. If the distance is
approximately 1.4 m, observe
observe the
readings corresponding to "L=1.4 m".
L
The
The scale pl ates may
vary
vary with dif ferent
types of downtilt
downtilt kit.
The
The scale pl ate shown
in the right f igure is
only for reference.
Method 2: Using an inclinometer
Tight en the
upper bracket
bracket
Before the adjustment,
adjustment, adjust t he
inclinometer to the desired
desired downtil
downtil t.
After t he adjustment,
adjustment, locate the bead in
the middl e of
of t he inclinometer.
inclinometer.
Tight en the
lower bracket
bracket .
Loosen
Loosen all t he nuts as
shown in the figure to adjust
the downtilt. After t he
adjustment is complete,
tighten all the nuts.
Check the component shape
and the position of screws
before the adjustment.
Strictly the operating
torques given in the
following figures must be
used.
Recommended
Recommended t orque M10 = 40N·m
&
t
e
k
c
a
r
B
409
e
d
i
u
G
n
io
t
a
ll
a
t
s
In
Antenna
An
tenna with Type F Brackets Instal
Installat
lation
ion Guide
Guide
Clamps
Installation Tools
Downtilt kit (Optional)
(1 PCS)
13 mm combination
wrench (2 PCS)
(2 PCS)
(1 PCS)
16 mm combination
wrench (2 PCS)
Inclinometer
M8
(4 PCS)
18 mm combinat ion w rench (2 PC
PCS)
M10
(4 PCS)
Torque wrench
M12
(4 PCS)
(1 PCS)
M10 x 110
(1 PCS)
ASMDT0D01
(1 PCS)
Installation without
without Dow
Downtilt
ntilt Kit
1
Assemble
Assemble the clamp
clamps
s
Assemble two clamps.
2
Install the clamps
clamps
Base
Install bolts on t he antenna base.
base.
The same install ation met hod
applies to both upper and lower
bases.
Use an
an M10 bolt for t he M10
mounting hole.
The recommended t orque for
M10 bolts is 30 N·m.
Align the bolt
bolt wit h the mounting hole on the clamp and
determine the bolt model according to the position of the
mounting hole. Replace
Replace the bolt if t he bolt
bolt m odel is
incorrect. Then, install and tighten the flat washer, spring
washer and nut.
Follow the directions shown in the
following figure to install brackets.
Use an M8 bolt f or the M8
mounting hole.
The
The recommended
recommended torque f or
M8 bolts is 18 N·m.
410
3
Install
Install the antenna
antenna
The same installation method applies to both
upper
upper and lower brackets. Install and tighten
the nut s. The recommended t orque M12 is 50
N·m.
Check and tighten all t he nuts when
the installation is complete. The
operating torques are given in the
following figures.
M12 =
50 N·m
The
mechanical
downtil
downtiltt of
the antenna is
fixed t o 0 °
and cannot be
adjusted.
Installation with
with Dow
Downtilt
ntilt Kit
1
Assemble
Assemble the bracket
Disass
Disassemble
emble the downtilt kit.
Assemble
Assemble t he lower bracket
Assemble
Assemble t he upper
upper bracket .
To avoid
avoid install ation int erference, assemble
brackets in the directions shown in the preceding
figure.
To avoid
avoid inst allat ion interf erence, assemble
brackets in the directions shown in the preceding
figure.
Tighten
Tighten t he nuts.
Tighten
Tighten t he nuts.
&
t
e
k
c
a
r
B
411
e
d
i
u
G
n
io
t
a
ll
a
t
s
In
2
Install the bracket
bracket
For detail
detail s about how to select bolts f or fixing the bracket,
see "Install t he clamps" .
The same install ation met hod applies to both upper and
lower brackets.
3
Install
Install the antenna
antenna
Tighten
Tighten all t he nuts
before lifting the
antenna onto the tower.
Ensure the bracket is
fully folded.
The same installat ion method applies t o both
both upper and lower brackets.
Install and tight en the nuts. The recommended t orque M12 is 50 N·m.
4
Adjust the mechanical
mechanical downtil
downtiltt
Exampl
Exampl e of a
scale plate
Scale
plate
Method 1: Using a scale
scale pl ate
The lett er "L" on t he scale plate indicates
the dist ance between antenna bases.
Determine the value that is closest to the
actual distance. If the distance is
approximately 1.4 m, observe
observe the
readings corresponding to "L=1.4 m".
L
The
The scale pl ates may
vary
vary with dif ferent
types of downtilt
downtilt kit.
The
The scale pl ate shown
in the right f igure is
only for reference.
Method 2: Using an inclinometer
Tight en the
upper bracket
bracket
Before the adjustment,
adjustment, adjust t he
inclinometer to the desired
desired downtil
downtil t.
After t he adjustment,
adjustment, locate the bead in
the middl e of
of t he inclinometer.
inclinometer.
Tight en the
lower bracket
bracket .
Loosen
Loosen all t he nuts as shown
in the figure to adjust the
downtilt
downtilt . After the
adjustment is complete,
tighten all the nuts.
Check the component shape
and the position of screws
before the adjustment.
Strictly the operating torques
given in the f ollowing figures
must be used.
412
Recommended
Recommended torque M 12 = 50N·m
Huawei Antenna Test Standard
Type
Reference
Method
Condition
Duration
Parameters Tested
Low Temperature
Exposure
ETSI
ETSI 300
300 019
019 - 2 - 4
IEC
IEC 600
60068
68 - 2 - 1
-55ºC
16h
Visual/physical exam VSWR ISO
and PIM (pre and post)
High Temperature
Temperature
Exposure
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 2
+70ºC
16h
Visual/physical exam VSWR ISO
and PIM (pre and post)
Temperature
Cycling
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 14
-55ºC/+70ºC
5cycles, 50h
Visual/physical exam VSWR ISO
and PIM (pre and post)
Humidity
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 30
+25ºC/+55ºC @ 95% RH
10cycles, 240h
Visual/physical exam VSWR ISO
and PIM (pre and post)
Wind Loading
ETSI 300 019 - 2 - 4
IEC 721 - 3 - 4
3surfaces, 144h
Visual/physical exam VSWR ISO
and PIM (pre and post)
Vibration
ETSI
ETSI 300
300 019
019 - 2 - 4
IEC
IEC 600
60068
68 - 2 - 6
sinusoidal 6.15mm,
10m/s2, 2-9HZ 9HZ-200HZ
3axes×5 sweep
cycles
Visual/physical exam VSWR ISO
and PIM (pre and post)
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 64
Truck level 3
3 axes, 90min
Visual/physical exam VSWR ISO
and PIM (pre and post)
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 27
300 m/s2, 6ms pulse width
72s
Visual/physical exam VSWR ISO
and PIM (pre and post)
ETSI 300 019 - 2 - 2
IEC 60068 - 2 - 27
300 m/s2, 6ms pulse width
72s
Visual/physical exam VSWR ISO
and PIM (pre and post)
ETSI 300 019 - 2 - 2
ISO 12048
6surfaces/4Angles/3Edges
13 drops
Visual/physical exam VSWR ISO
and PIM (pre and post)
ETS
ETSI 300
300 019
019 - 2 - 4
IEC
IEC 6006
60068
8 - 2 - 18
0.06
0.067m
7m3/
3/m
min,
in, 5r/m
5r/min
in
2h
Visual/physical exam VSWR ISO
and PIM (pre and post)
MIL - STD - 810
150mm/h, 31m/s,
4surfaces, more
Method 506.3
0.5mm-4.5mm, 45°
than 120min
ETSI
ETSI 300
300 019
019 - 2 - 4
IEC
IEC 600
60068
68 - 2 - 11
11
5%N
5%NaCl
aCl mis
mistt @+4
@+40º
0ºC
C
1000h
Visual/physical exam VSWR ISO
and PIM (pre and post)
ETSI
ETSI 300
300 019
019 - 2 - 4
IEC
IEC 60068
60068 - 2 - 52
5%NaCl mist @+15/+40ºC,
93% RH
10 cycles, 240h
Visual/physical exam VSWR ISO
and PIM (pre and post)
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 5
1120W/s2 @+40ºC
24h/cycle,
56days
Visual/physical exam VSWR ISO
and PIM (pre and post)
ETSI
ETSI 300
300 019
019 - 2 - 4
IEC
IEC 60068
60068 - 2 - 68
150um-850um, 1g/m3,
20m/s @+70ºC, RH<30%
8h
Visual/physical exam VSWR ISO
and PIM (pre and post)
Transportation
Vibration
Shocks(without
package)
shocks
(with package)
Drop
(with package)
Rain
(in water chamber)
Wind
ind Dri
Drive
ven
n Rai
Rain
n
Salt Fog
(Continuous)
Salt Fog
(Cyclic)
Solar
(UV) Exposure
Dust and sand
GR - 487
487 - CORE
ORE
Simulated constant force of
200 km/h wind
Visual/physical exam VSWR ISO
and PIM (pre and post)
Catalogue
Catalogu
e Issue
Issue 01/
01/2018
Any previous dat asheet issues become invalid.
We reserve
reserve t he right t o make alt
alt erations in accordance with t he requirements
requirements of our customers.
Huawei
Huawei ant enna support s NGMN
NGMN recommendat ions on Base St
St ati on Antenna Standard s (BAST
(BASTA)
A)..
The notes of Huawei antenna
antenna foll
follow
owed:
ed:
•
Facilit
Facilit ies, such as t owers
owers and poles, must b ea
earr t he weight
weight and win d load of ant ennas.
ennas.
•
HUA
HUAWEI's st andard
andard brackets and accessories
accessories must be used for any install ation.
•
The ant
ant enna working
working environment
environment m ust m ee
eett t he requirements
requirements specif ied in t he datasheet
datasheet .
•
Only qualified personnel are allowed to perform inst allati on. Installat ion tools and procedures
procedures must
conform t o requirements
requirements described in t he antenna install ation guide.