Die Cast Monitoring System CastTrend
【Use your personal computer as a monitoring device for die-casting machines ! 】
Centralized management example of
CastTrend.
Overview of CastTrend.
◆ Casting data collection software
Connect to a PC with
installed with a LAN cable to capture shot data.
Demonstrates power in traceability (tracking management).
Trend display
Observe changes in trends over time
Server PC
(Customer Prepared ）
Dedicated LAN port
S-DDV,HS-DDV Loading
Machine
Serial
communication
or
TCP/IP
communication
LAN
LAN cable
ＬＡＮ
S-DDV,HS-DDV
Non Loading machine
Multi-window system
Waveform display
Waveform display for each shot
Monitor Panel（Add）
* Note: Monitor panel, injection stroke sensor,
and Additional pressure sensors are required.
PC (Customer Prepared)
Confirm shot profile
Data storage (hard disk in PC)
Die casting machine
made by another company.
Save and manage all the past data by date
(CSV format)
You can read and display it freely with viewer
software
PC (Customer Prepared)
Monitor Paｎel（Add）
＊Note: Monitor panel, ishot stroke sensor,
and Additional pressure sensors are required
Confirm setting items and monitor values
Application to AI, etc.
Standard Measurement Items
Collection items for each cycle
Set Value
Measurin
g Item
Position（1-10point）
Velocity（1-10Point）
Metal Pressure
Intensification Valve open
Shot No.
Date
Mold Name
Velocity V1 V2
Velocity V3 V4
Biscuit Thickness
Acceleration position
Deceleration position
Intensification Time
Biscuit thickness
Tonnage
Cycle Time
Waveform Data Collection Items
Shot wave
Time
Shot Stroke
Shot velocity
Head Pressure
Rod Pressure
Metal Pressure
Vacuum pressure (Option)
Other measurements are also
possible.
It can be connected by installing a monitor panel on a machine without S-DDV or
HS-DDV, or a machine made by another company.
Since all data is stored in a file on a PC, it
can be used for AI analysis.
Introduction to CastTrend.
Case
S-DDV,HS－DDV loading
Machine
Other than the above
※ For details, please contact the nearest service station.
Form of introduction
Delivery date and construction period
CD-ROM delivery
Install on your own
Install the monitor
panel
Approx. 3 days (Saturdays and Sundays + 1
day confirmation)
It depends on the condition of the machine.
Please contact us separately.
Copyright 2022 UBE Machinery Corporation All Rights Reserved