Construction industry. We are not confined to domestic
market we have completed very successful projects
outside Turkey with our business partners. Our continuous dedication to quality and customer satisfaction are
the main drivers of this achievement.
Continuing its activities in a total of 12,000 square meter
closed area in Corlu and Hadımkoy -TURKEY. Arfen is an
important manufacturer in the Plastic and Aluminium
industries While implementing modern and advanced
production technology, we also give special importance
to health and safety of our employees, as well as
environmental protection.
Arfen products meet various needs of construction
industry Expansion Joint Profiles, Bridge Expansion Joints
and Bearings, , Decoration Profiles , Wall&Corner Guard
Systems, Movement Control joints, Entrance Matting
Systems, dilatation and chamber band with high quality
standards and continuous investments and improvements are examples of oıur large porduct range
We have our footprints in numerous projects not only in domestic market also in 30 countries. Products manufactured, by Arfen , have been used
many years without any problems.
Regarding Arfen`s quality approach,everyone from lowest level of employees up to to the highest level are committed to excellence. Customer satisfaction with high quality production implementation and service is the highest priority for Arfen. To achieve this goal we see our customers, suppliers
and employees as a our business partners and indispensible building blocks of our company
Kindest Regards
Product Instructor
Thermal
Vehicle
Pedestrian
Interior
Water Barrier Optional
Galvanized steel
sheet profile
Product Code
Product Length
Fire Rate
Product Width
ARFire10
7 mt
2 Hr.
10 cm
ARFire15
7 mt
2 Hr.
15 cm
ARFire 20
7 mt
2 Hr.
20 cm
4*40 yhb screw
6*32 steel anchor
Fabric
Fabric
Fabric
Fabric
Fabric
Fabric
Fabric
Değişken
2
TURKEY Head Office and Factory / Hadimkoy- Istanbul +90 212 485 16 15
For technical support contact us through www.arfen.com, info@arfen.com or +90 212 485 16 15
Product Discription
Passive Fire barrier system for 2 Hr. Fire Ratings.
-Tested in accordance with:
The test report referenced WF No. 167940 presented details of a fire resistance
conducted in accordance with Clause 5 of BS476: Part 22: 1987 to an assymetrical,
non-loadbearing fabric barrier assembly.
-For
use
in
horizontal
and
vertical
expansion
joints
ranging
(100mm-150mm-200mm) in size.
-Suitable for floors and walls
-Also you can use liquid sprey to prevent fire smoke on this barrier. (Please get
contact to information about liquid fire smoke sprey.)
-Usage Area:
Car Park, Shoping Mall, Hospital, School, Library, Dormitory etc.
Easy On site
ARFEN Fire Barrier systems can be installed more easily
and in much less time than most conventional fire
barrier systems.
ARFEN Fire Barrier Systems have been manufactured
and tested to provide optimum fire protection when
properly installed in the intended environment.
Reinforced plate
This passive fire barrier easily assembled on the site. The reinforced plates allows
mounting the passive fire barrier on the concrete surface.
3
TURKEY Head Office and Factory / Hadimkoy- Istanbul +90 212 485 16 15
For technical support contact us through www.arfen.com, info@arfen.com or +90 212 485 16 15
1. Step
Concrete surface should be clean
2. Step
The profile should be placed on
the concrete surface carefuly
3. Step
Immobilized from both sides using
4*40 yhb screw
3
TURKEY Head Office and Factory / Hadimkoy- Istanbul +90 212 485 16 15
For technical support contact us through www.arfen.com, info@arfen.com or +90 212 485 16 15
Contact Information - Head Office
Atatürk Sanayi Bölgesi Ömerli Mh. Hakkı İleri Cd.
Gülce Sk. No:22 34555 Hadımköy/ İSTANBUL
+90 (212) 485 16 15
+90 (212) 485 16 77
arfen@arfen.com