Redefine your comfort zone. ™ | www.titus-hvac.com 300 / 350 grilles metric sizes h MRI compatible humid areas prevents corrosion Redefine your comfort zone. ™ | www.titus-hvac.com Table of Contents H 300 / 350 grilles 300 / 350 GRILLES 300 / 350 Grille Products.................................................................................................................................................................H4 OVERVIEW Overview.........................................................................................................................................................................................H8 SUPPLY GRILLES Supply Grilles..................................................................................................................................................................................H9 ¾” Spacing - Steel..........................................................................................................................................................................H9 301 (RL / RS) - Single Deflection.....................................................................................................................................................H9 300 (RL / RS) - Double Deflection...................................................................................................................................................H9 Dimensions....................................................................................................................................................................................H10 ¾” Spacing - Aluminum................................................................................................................................................................H11 301 (FL / FS) - Single Deflection....................................................................................................................................................H11 300 (FL / FS) - Double Deflection..................................................................................................................................................H11 Dimensions....................................................................................................................................................................................H12 ¾” Spacing - Stainless Steel.........................................................................................................................................................H13 301 (RL-SS / RS-SS) - Single Deflection........................................................................................................................................H13 300 (RL-SS / RS-SS) - Double Deflection.......................................................................................................................................H13 Dimensions....................................................................................................................................................................................H14 ½” Spacing - Steel........................................................................................................................................................................H15 301 (RL-HD / RS-HD) - Single Deflection......................................................................................................................................H15 300 (RL-HD / RS-HD) - Double Deflection.....................................................................................................................................H15 Dimensions....................................................................................................................................................................................H16 Performance Data..........................................................................................................................................................................H17 Performance Notes........................................................................................................................................................................H22 Horizontal Deflection (Spread)......................................................................................................................................................H23 ¾” Spacing - Aluminum................................................................................................................................................................H24 R-301F - Single Deflection.............................................................................................................................................................H24 R-300F - Double Deflection...........................................................................................................................................................H24 Dimensions....................................................................................................................................................................................H25 Performance Data..........................................................................................................................................................................H26 300 / 350 GRILLES RETURN GRILLES H2 Return Grilles.................................................................................................................................................................................H27 ¾” Spacing - Steel........................................................................................................................................................................H27 350 (RL / RS) - 35B Deflection........................................................................................................................................................H27 350 (ZRL / ZRS) - 0B Deflection......................................................................................................................................................H27 Dimensions....................................................................................................................................................................................H28 ¾” Spacing - Aluminum................................................................................................................................................................H29 350 (FL / FS) - 35B Deflection........................................................................................................................................................H29 350 (ZFL / ZFS) - 0B Deflection......................................................................................................................................................H29 Dimensions....................................................................................................................................................................................H30 ¾” Spacing - Stainless Steel.........................................................................................................................................................H31 350 (RL-SS / RS-SS) - 45B Deflection.............................................................................................................................................H31 Dimensions....................................................................................................................................................................................H32 1/2” Spacing - Steel......................................................................................................................................................................H33 355 (RL / RS) - 35B Deflection........................................................................................................................................................H33 355 (ZRL / ZRS) - 0B Deflection......................................................................................................................................................H33 Dimensions....................................................................................................................................................................................H34 ½” Spacing - Aluminum................................................................................................................................................................H35 355 (FL / FS) - 35B Deflection........................................................................................................................................................H35 Table of Contents (continued) 300 / 350 grilles FILTER RETURN GRILLES Filter Return Grilles........................................................................................................................................................................H45 Steel, Aluminum and Stainless Steel.............................................................................................................................................H45 350 (RLF / RSF) / 350 (FLF / FSF) / 355 (RLF / RSF) / 355 (FLF / FSF) / 350 (RLF-SS / RSF-SS)....................................................H45 Redefine your comfort zone. ™ | www.titus-hvac.com 355 (ZFL / ZFS) - 0B Deflection......................................................................................................................................................H35 Dimensions....................................................................................................................................................................................H36 Performance Data..........................................................................................................................................................................H37 350R, 350F and 350R-SS..............................................................................................................................................................H37 350ZR and 350ZF..........................................................................................................................................................................H39 355R and 355F .............................................................................................................................................................................H41 355ZR and 355ZF .........................................................................................................................................................................H43 OPTIONS & ACCESSORIES Options & Accessories..................................................................................................................................................................H46 Border Types..................................................................................................................................................................................H47 Accessories...................................................................................................................................................................................H47 Oversize Grille Construction..........................................................................................................................................................H48 Screw Hole Location Chart...........................................................................................................................................................H49 Hinge Locations............................................................................................................................................................................H50 ICONS Icons Key.......................................................................................................................................................................................H52 H 300 / 350 GRILLES H3 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com 300/350 Grille Products supply grilles PAGES: H8-H23 301 (RL / RS) 300 (RL / RS) 301 (FL / FS) 300 (FL / FS) STEEL SINGLE DEFLECTION GRILLES STEEL DOUBLE DEFLECTION GRILLES ALUMINUM SINGLE DEFLECTION GRILLES ALUMINUM DOUBLE DEFLECTION GRILLES •• Available in ¾” blade spacing •• Individually adjustable blades •• Blades parallel to the long or short dimension •• Standard finish is #26 white •• Available in ¾” blade spacing •• Individually adjustable blades •• Blades parallel to the long & short dimension •• Standard finish is #26 white •• Available in ¾” blade spacing •• Individually adjustable blades •• Blades parallel to the long or short dimension •• Standard finish is #26 white •• Available in ¾” blade spacing •• Individually adjustable blades •• Blades parallel to the long & short dimension •• Standard finish is #26 white 301 (RL-SS / RS-SS) 300 (RL-SS / RS-SS) 301 (RL-HD / RS-HD) 300 (RL-HD / RS-HD) STAINLESS STEEL SINGLE DEFLECTION GRILLES STAINLESS STEEL DOUBLE DEFLECTION GRILLES HEAVY DUTY STEEL SINGLE DEFLECTION GRILLES HEAVY DUTY STEEL DOUBLE DEFLECTION GRILLES •• Available in ¾” blade spacing •• Individually adjustable blades •• Blades parallel to the long or short dimension •• Works well in corrosive environments •• Standard finish is #04 mill •• Available in ¾” blade spacing •• Individually adjustable blades •• Blades parallel to the long & short dimension •• Works well in corrosive environments •• Standard finish is #04 mill •• Available in ½” blade spacing •• Individually adjustable blades •• Blades parallel to the long or short dimension •• Works well in areas subject to abuse •• Standard finish is #26 white •• Available in ½” blade spacing •• Individually adjustable blades •• Blades parallel to the long & short dimension •• Works well in areas subject to abuse •• Standard finish is #26 white 300 / 350 GRILLES H H4 300 / 350 grilles 300/350 Grille Products (continued) R-301F R-300F ALUMINUM SINGLE DEFLECTION GRILLES ALUMINUM DOUBLE DEFLECTION GRILLES •• •• •• •• •• •• •• •• Available in ¾” blade spacing Individually adjustable blades Standard finish is #26 white Optional mounting bracket and damper available Redefine your comfort zone. ™ | www.titus-hvac.com round supply grilles PAGES: H24-H26 Available in ¾” blade spacing Individually adjustable blades Standard finish is #26 white Optional mounting bracket and damper available H 300 / 350 GRILLES H5 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com 300/350 Grille Products (continued) H return grilles PAGES: H27-H40 350 (RL / RS) 350 (ZRL / ZRS) 350 (FL / FS) 350 (ZFL / ZFS) 350 (RL-SS / RS-SS) 355 (RL / RS) 355 (ZRL / ZRS) 355 (FL / FS) RETURN GRILLES •• •• •• •• •• Available in ¾” or ½” blade spacing 35B, 45B and 0B deflection models to choose from Available in steel, aluminum and stainless steel Blades parallel to the long or short dimension Finishes are either #26 white or #04 mill 300 / 350 GRILLES 355 (ZFL / ZFS) H6 300 / 350 grilles 300/350 Grille Products (continued) 350 (FLF / FSF) 350 (RLF / RSF) 355 (RLF / RSF) 355 (FLF / FSF) RETURN FILTER GRILLES RETURN FILTER GRILLES RETURN FILTER GRILLES RETURN FILTER GRILLES •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• Available in ¾” blade spacing 35B deflection blades Available in steel Accommodates 1” or 2” thick filters •• Standard finish is #26 white Available in ¾” blade spacing 35B deflection blades Available in aluminum Accommodates 1” or 2” thick filters •• Standard finish is #26 white Available in ½” blade spacing 35B deflection blades Available in steel Accommodates 1” or 2” thick filters •• Standard finish is #26 white Redefine your comfort zone. ™ | www.titus-hvac.com filter return grilles PAGE: H41-H44 Available in ½” blade spacing 35B deflection blades Available in aluminum Accommodates 1” or 2” thick filters •• Standard finish is #26 white H RETURN FILTER GRILLES •• •• •• •• Available in ¾” blade spacing 45B deflection blades Available in stainless steel Accommodates 1” or 2” thick filters •• Standard finish is #04 mill 300 / 350 GRILLES 350 (RLF-SS / RSF-SS) H7 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com Overview The Titus 300 / 350 series of louvered supply and return grilles are the industry standard for high quality, competitively priced grilles. The series is available in steel, aluminum and stainless steel material to meet any job application. The 300 series supply grilles feature adjustable louvered blades in single or double deflection with ¾” blade spacing. For industrial and institutional applications, the 300 series are available in a heavy duty “HD” design that includes heavy gauge frame and blades. The 350 series return grilles are available in ¾” or ½” blade spacing and 0 degree or 35 degree deflection to provide maximum versatility for return air applications. The 350 series also include an option for a factory installed filter rack to accommodate 1” or 2” thick filters. Optional opposed blade dampers are available for the 300 / 350 series in steel, aluminum and stainless steel material and are factory installed. • High quality, competitively priced grilles • Defines the standard for the industry • Available in steel, aluminum, or 304 stainless steel • Available in supply, return, or filter return models • Standard supply grilles available with ¾” blade spacing • Return grilles available with ¾” or ½” blade spacing • Front blades available parallel to the long or short dimension H 300 / 350 OVERVIEW AT A GLANCE Function Supply Heavy Duty Supply 300 / 350 GRILLES Return H8 Filter Return Steel Border Description Deflection Blade Spacing Single Double Single ¾” ¾” ½” ½” front ¾” rear ¾” ¾” ½” ½” ¾” ½” Double 35° Fixed 0° Fixed 35° Fixed 0° Fixed 35° Fixed 35° Fixed Aluminum Border 304 Stainless Steel Long Front Blades Short Front Blades Long Front Blades Short Front Blades Long Front Blades Short Front Blades 301RL 300RL 301RLHD 301RS 300RS 301RSHD 301FL 300FL — 301FS 300FS — 301RL-SS 300RL-SS — 301RS-SS 300RS-SS — 300RLHD 300RSHD — — — — 350RL 350ZRL 355RL 355ZRL 350RLF 355RLF 350RS 350ZRS 355RS 355ZRS 350RSF 355RSF 350FL 350ZFL 355FL 355ZFL 350FLF 355FLF 350FS 350ZFS 355FS 355ZFS 350FSF 355FSF 350RL-SS — — — 350RLF-SS — 350RS-SS — — — 350RSF-SS — Model Available Material Types 301 300 A S SS • • • • • • Supply Return 301HD 300HD • • 350 355 350Z 355Z • • • • • • • • • Note: A = Aluminum Border and Blades, S = Steel, SS = 304 Stainless Steel. Some aluminum and stainless steel models may be constructed of all nonmagnetic components (no plastics) to meet MRI requirements. Consult your Titus representative for specific details. See individual model information for construction details. Titus reserves the right to make product improvements on a continual basis. As products are updated, new submittal sheets are published. Your Titus representative can provide you with updated technical information on all products. 300 / 350 Supply Grilles 300 / 350 grilles 301RS • ¾” blade spacing • Single deflection • Individually adjustable blades • Blades parallel to the short dimension 301RL • Same as 301RS with blades parallel to the long dimension 300RS • ¾” blade spacing • Double deflection 301RL 300RS Redefine your comfort zone. ™ | www.titus-hvac.com 301 / 300 (RL / RS) • Individually adjustable blades • Front blades parallel to the short dimension 300RL • Same as 300RS with front blades parallel to the long dimension metric sizes MODELS: Single Deflection Models 301RL 301RS See website for Specifications H Double Deflection Models 300RL 300RS FINISH: Standard Finish - #26 White OVERVIEW 3 /4” Blade Spacing / Steel PRODUCTS INCLUDE • Material: Roll-formed Steel • Welded Border • Available Border Types: #1 - Surface Mount • Countersunk Screw Holes • #8 x 1¼” Long Phillips Flat Head Sheet Metal Screws, Painted White • Optional Steel-Opposed Blade Damper 301 / 300 (RL / RS) Titus’ 300 / 350 Series supply grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. H9 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 301 / 300 (RL / RS) DIMENSIONS Single Deflection Models 301RL / RS - Border Type 1 D plus 1¾" 9/16" D minus ¾" 1¼" ¾" ¼" Screwdriver Slot Operator For Optional Damper Optional Opposed Blade Damper 1¼" 2½" D minus ½" Nominal Duct Size D" Note: When Damper Is Full Open, Add " To Overall Depth. Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost H Double Deflection Models 300RL / RS - Border Type 1 9/16" 1¼" D plus 1¾" D minus ¾" ¾" ¼" 1¾" 3" DIMENSIONS Screwdriver Slot Operator For Optional Damper H10 Optional Opposed Blade Damper D minus ½" Nominal Duct Size D" Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost All dimensions are in inches Note: When Damper Is Full Open, Add " To Overall Depth. 300 / 350 Supply Grilles (continued) 300 / 350 grilles 301FS • Great for areas with high humidity or subject to moisture • ¾” blade spacing • Single deflection • Individually adjustable blades • Blades parallel to the short dimension 301FL • Same as 301FS with blades parallel to the long dimension 300FS • Great for areas with high humidity or subject to moisture • ¾” blade spacing • Double deflection 301FL 300FS Redefine your comfort zone. ™ | www.titus-hvac.com 301 / 300 (FL / FS) 300FL • Same as 300FS with front blades parallel to the long dimension • Individually adjustable blades • Front blades parallel to the short dimension metric sizes MODELS: Single Deflection Models 301FL 301FS humid areas See website for Specifications H Double Deflection Models 300FL 300FS FINISH: Standard Finish - #26 White OVERVIEW 3 /4” Blade Spacing / Aluminum PRODUCTS INCLUDE • Material: Roll-formed Aluminum Border and Blades on sizes up to 24 x 24 inches. Extruded Aluminum Blades for Larger Sizes. • Welded Border • Available Border Types: #1 - Surface Mount • Countersunk Screw Holes • #8 x 1¼” Long Phillips Flat Head Sheet Metal Screws, Painted White • Optional Steel or Aluminum Opposed-Blade Damper 301 / 300 (FL / FS) Titus’ 300 / 350 Series supply grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. H11 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 301 / 300 (FL / FS) DIMENSIONS Single Deflection Models 301FL / FS - Border Type 1 D plus 1¾" 9/16" D minus ¾" 1¼" ¾" Screwdriver Slot Operator For Optional Damper ¼" 1¼" 2½" Optional Opposed Blade Damper D minus ½" Nominal Duct Size D" Note: When Damper Is Full Open, Add ⅜" To Overall Depth. Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost H Double Deflection Models 300FL / FS - Border Type 1 9/16" 1¼" D plus 1¾" D minus ¾" ¾" ¼" 1⅞" DIMENSIONS Screwdriver Slot Operator For Optional Damper H12 Optional Model AG-15 Opposed Blade Damper D minus ½" Nominal Duct Size D" Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost All dimensions are in inches 3⅛" Note: When Damper Is Full Open, Add ⅜" To Overall Depth. 300 / 350 Supply Grilles (continued) 300 / 350 grilles 301RS-SS • Great for use in corrosive environments • ¾” blade spacing • Single deflection • Individually adjustable blades • Blades parallel to the short dimension • Available in 316 Stainless Steel 301RL-SS • Same as 301RS-SS with blades parallel to the long dimension 300RS-SS • Great for use in corrosive environments • ¾” blade spacing 301RL-SS 300RS-SS Redefine your comfort zone. ™ | www.titus-hvac.com 301 / 300 (RL-SS / RS-SS) 300RL-SS • Same as 300RS-SS with front blades parallel to the long dimension • Double deflection • Individually adjustable blades • Front blades parallel to the short dimension • Available in 316 Stainless Steel MODELS: Single Deflection Models 301RL-SS 301RS-SS metric sizes prevents corrosion See website for Specifications H Double Deflection Models 300RL-SS 300RS-SS FINISH: Standard Finish - #04 Mill Titus’ 300 / 350 Series supply grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. PRODUCTS INCLUDE • Material: 304 Stainless Steel Border and Blades • Welded Border • Available Border Types: #1 - Surface Mount • Countersunk Screw Holes • #8 x 1¼” Long Phillips Flat Stainless Steel Head Sheet Metal Screws • Optional 304 Stainless Steel Opposed-Blade Damper 301 / 300 (RL-SS / RS-SS) OVERVIEW 3 /4” Blade Spacing / Stainless Steel H13 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 301 / 300 (RL-SS / RS-SS) DIMENSIONS Single Deflection Models 301RL-SS / RS-SS - Border Type 1 Duct plus 113/16" 17/16" ¾" /16" 3 11/8" Duct Size minus ¼" Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 2” increments Odd and fractional sizes are available at additional cost H Double Deflection Models 300RL-SS / RS-SS - Border Type 1 17/16" Duct plus 1" ¾" DIMENSIONS 17/8" H14 Duct Size minus ¼" Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 2” increments Odd and fractional sizes are available at additional cost All dimensions are in inches 300 / 350 Supply Grilles (continued) 300 / 350 grilles 301RS-HD • Great for use in areas subject to abuse • ½” blade spacing • Single deflection • Individually adjustable blades • Blades parallel to the short dimension • 14-gauge blades, 18-gauge borders 301RL-HD • Same as 301RS-HD with blades parallel to the long dimension 300RS-HD • Great for use in areas subject to abuse • ½” blade spacing 301RL-HD 300RS-HD Redefine your comfort zone. ™ | www.titus-hvac.com 301 / 300 (RL-HD / RS-HD) 300RL-HD • Same as 300RS-HD with front blades parallel to the long dimension • Double deflection • Individually adjustable blades • Front blades parallel to the short dimension • 14-gauge blades, 18-gauge borders MODELS: Single Deflection Models 301RL-HD 301RS-HD prevents metriccorrosion sizes See website for Specifications H Double Deflection Models 300RL-HD 300RS-HD FINISH: Standard Finish - #26 White Titus’ 300 / 350 Series supply grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. PRODUCTS INCLUDE • Material: Steel • Welded Border • Available Border Types: #1 - Surface Mount • Countersunk Screw Holes • #8 x 1¼” Long Phillips Flat Head Sheet Metal Screws, Painted White • Optional Steel Opposed-Blade Damper 301 / 300 (RL-HD / RS-HD) OVERVIEW 1 /2” Blade Spacing / Steel H15 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 301 / 300 (RL-HD / RS-HD) DIMENSIONS Single Deflection Models 301RL-HD / RS-HD - Border Type 1 D plus 1¾" 1¼" 9/16" Adjustable 14 Gauge Blades ½" 18 Gauge Frame 1½" ¼" 1¼" Screwdriver Slot Operator For Optional Damper 2½" Optional Opposed Blade Damper Note: When Damper Is Full Open, Add ⅜" To Overall Depth. D minus ½" Nominal Duct Size D " Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost H Double Deflection Models 300RL-HD / RS-HD - Border Type 1 D plus 1¾" 9/16" 1¼" ½" Adjustable 14 Gauge Front Blades 18 Gauge Steel Frame DIMENSIONS H16 ¼" 1¾" Screwdriver Slot Operator For Optional Damper Optional Opposed Blade Damper Adjustable 26 Gauge Rear Blades 1½" 3" D minus ½" Nominal Duct Size D " Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost All dimensions are in inches Note: When Damper Is Full Open, Add ⅜" To Overall Depth. 300 / 350 grilles PERFORMANCE DATA NC-20 Nom. Duct Area ( ft2 ) Core Area ( ft2 ) 6x6 0.25 0.19 8x6 0.33 0.26 10x6 0.42 0.34 8x8 0.44 0.37 12x6 0.50 0.41 14x6 0.58 0.48 16x6 12x8 0.67 0.57 10x10 0.69 0.59 18x6 0.75 0.63 20x6 12x10 0.83 0.72 22x6 0.92 0.77 24x6 18x8 12x12 1.00 0.88 1.25 1.11 30x6 18x10 Core Vel. Vel. Press. 0° Total 22.5° Press. 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° 300 0.006 0.016 0.018 0.028 57 5-7-14 4-6-11 2-3-6 78 5-9-16 4-7-13 2-4-7 102 6-10-19 5-8-14 3-4-8 111 6-10-19 5-8-15 3-5-9 123 7-11-20 5-8-16 3-5-9 144 7-12-22 6-9-17 3-5-10 171 8-13-24 6-10-19 4-6-11 177 8-13-24 6-10-19 4-6-11 189 8-14-25 7-11-20 4-6-11 216 9-15-27 7-11-21 4-7-12 231 9-15-28 7-12-22 4-7-13 264 10-16-30 8-12-23 4-7-13 333 11-18-34 9-14-26 5-8-15 400 0.010 0.029 0.033 0.049 76 7-10-16 5-8-12 3-4-7 104 8-12-19 6-9-15 3-5-8 136 9-13-21 7-10-17 4-6-10 148 9-14-22 7-11-17 4-6-10 164 10-15-24 8-11-18 4-7-11 192 11-16-25 8-12-20 5-7-11 228 11-17-28 9-13-22 5-8-12 236 12-18-28 9-14-22 5-8-13 252 12-18-29 9-14-23 5-8-13 288 13-19-31 10-15-24 6-9-14 308 13-20-32 10-16-25 6-9-15 352 14-21-34 11-17-27 6-10-16 444 11 16-24-39 12-19-30 7-11-17 500 0.016 0.046 0.051 0.077 95 8-12-18 6-10-14 4-6-8 130 11 10-15-21 8-11-16 4-7-9 170 12 11-17-24 9-13-19 5-7-11 185 13 12-17-25 9-13-19 5-8-11 205 13 12-18-26 9-14-20 5-8-12 240 14 13-20-28 10-15-22 6-9-13 285 15 14-22-31 11-17-24 6-10-14 295 15 15-22-32 11-17-24 7-10-14 315 15 15-23-33 12-18-25 7-10-15 360 16 16-24-35 12-19-27 7-11-16 385 16 17-25-36 13-19-28 8-11-16 440 16 18-27-39 14-21-30 8-12-17 555 17 20-30-43 16-23-34 9-14-19 600 0.022 0.066 0.074 0.111 114 15 10-14-20 8-11-15 4-6-9 156 17 12-16-23 9-13-18 5-7-10 204 18 13-19-26 10-14-20 6-8-12 222 18 14-19-27 11-15-21 6-9-12 246 19 15-20-29 11-16-22 7-9-13 288 19 16-22-31 12-17-24 7-10-14 342 20 17-24-34 13-19-26 8-11-15 354 20 18-24-35 14-19-27 8-11-16 378 20 18-25-36 14-20-28 8-11-16 432 21 19-27-38 15-21-30 9-12-17 462 21 20-28-40 16-22-31 9-13-18 528 22 21-30-42 17-23-33 10-13-19 666 23 24-34-47 19-26-37 11-15-21 700 0.031 0.090 0.100 0.152 133 20 12-15-21 9-12-16 5-7-10 182 21 14-18-25 11-14-19 6-8-11 238 23 16-20-28 12-16-22 7-9-13 259 23 16-21-30 13-16-23 7-9-13 287 23 17-22-31 13-17-24 8-10-14 336 24 18-24-34 14-18-26 8-11-15 399 25 20-26-37 16-20-28 9-12-17 413 25 20-26-37 16-20-29 9-12-17 441 25 21-27-39 16-21-30 9-12-17 504 26 23-29-41 17-23-32 10-13-19 539 26 23-30-43 18-23-33 11-14-19 616 26 25-32-46 19-25-35 11-15-21 777 27 28-36-51 22-28-40 13-16-23 Performance notes appear at end of table 800 0.040 0.117 0.131 0.198 152 24 13-16-23 10-12-18 6-7-10 208 25 15-19-27 12-15-21 7-8-12 272 27 18-21-30 14-17-23 8-10-14 296 27 18-22-32 14-17-25 8-10-14 328 27 19-24-33 15-18-26 9-11-15 384 28 21-25-36 16-20-28 9-11-16 456 29 23-28-39 18-22-30 10-12-18 472 29 23-28-40 18-22-31 10-13-18 504 29 24-29-41 18-23-32 11-13-19 576 30 25-31-44 20-24-34 11-14-20 616 30 26-32-46 20-25-35 12-15-21 704 30 28-34-49 22-27-38 13-16-22 888 31 32-39-55 25-30-42 14-17-25 NC-40 1000 0.062 0.183 0.204 0.309 190 31 15-18-25 11-14-20 7-8-11 260 32 17-21-30 13-16-23 8-9-13 340 33 20-24-34 15-19-26 9-11-15 370 34 20-25-35 16-19-27 9-11-16 410 34 21-26-37 17-20-29 10-12-17 480 35 23-28-40 18-22-31 10-13-18 570 35 25-31-44 20-24-34 11-14-20 590 35 26-32-45 20-24-35 12-14-20 630 36 27-33-46 21-25-36 12-15-21 720 36 28-35-49 22-27-38 13-16-22 770 37 29-36-51 23-28-40 13-16-23 880 37 31-39-55 24-30-42 14-17-25 1110 38 35-43-61 27-34-47 16-19-28 1200 0.090 0.263 0.294 0.445 228 36 16-20-28 12-15-22 7-9-12 312 38 19-23-32 15-18-25 8-10-15 408 39 21-26-37 17-20-29 10-12-17 444 39 22-27-39 17-21-30 10-12-17 492 39 24-29-41 18-22-32 11-13-18 576 40 25-31-44 20-24-34 11-14-20 684 41 28-34-48 22-26-37 12-15-22 708 41 28-35-49 22-27-38 13-16-22 756 41 29-36-51 23-28-39 13-16-23 864 42 31-38-54 24-30-42 14-17-24 924 42 32-40-56 25-31-43 15-18-25 1056 43 34-42-60 27-33-46 16-19-27 1332 44 39-47-67 30-37-52 17-21-30 1400 0.122 0.358 0.401 0.606 266 41 17-21-30 13-16-23 8-10-13 364 42 20-25-35 16-19-27 9-11-16 476 43 23-28-40 18-22-31 10-13-18 518 44 24-30-42 19-23-32 11-13-19 574 44 25-31-44 20-24-34 11-14-20 672 45 28-34-48 21-26-37 12-15-21 798 45 30-37-52 23-28-40 13-17-23 826 46 31-37-53 24-29-41 14-17-24 882 46 32-39-55 24-30-42 14-17-25 1008 46 34-41-58 26-32-45 15-19-26 1078 47 35-43-60 27-33-47 16-19-27 1232 47 37-46-65 29-35-50 17-21-29 1554 48 42-51-72 32-40-56 19-23-33 H PERFORMANCE DATA Nom. Duct Size ( in. ) NC-30 Redefine your comfort zone. ™ | www.titus-hvac.com MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD H17 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA H MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD NC-20 Nom. Duct Size ( in. ) Nom. Duct Area ( ft2 ) Core Area ( ft2 ) 14x14 1.36 1.22 36x6 27x8 18x12 1.50 1.35 22x10 1.53 1.37 30x8 24x10 1.67 1.49 42x6 18x14 1.75 1.59 16x16 1.78 1.62 2.00 1.82 18x18 2.25 2.07 42x8 24x14 2.33 2.14 36x10 30x12 2.50 2.29 48x8 24x16 2.67 2.46 20x20 2.78 2.57 36x12 24x18 3.00 2.75 PERFORMANCE DATA 48x6 36x8 24x12 18x16 H18 Core Vel. Vel. Press. 0° Total 22.5° Press. 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° 300 0.006 0.016 0.018 0.028 366 12-19-35 9-15-27 5-8-16 405 12-20-37 10-15-29 6-9-17 411 12-20-37 10-16-29 6-9-17 447 13-21-39 10-16-30 6-9-17 477 13-22-40 10-17-31 6-10-18 486 14-22-41 11-17-31 6-10-18 546 14-23-43 11-18-33 6-10-19 621 15-25-46 12-19-36 7-11-21 642 16-25-47 12-19-36 7-11-21 687 16-26-48 12-20-37 7-12-22 738 17-27-50 13-21-39 8-12-22 771 17-27-51 13-21-40 8-12-23 825 18-28-53 14-22-41 8-13-24 400 0.010 0.029 0.033 0.049 488 11 17-25-41 13-20-31 8-11-18 540 12 18-26-43 14-21-33 8-12-19 548 12 18-27-43 14-21-33 8-12-19 596 12 19-28-45 14-22-35 8-13-20 636 12 19-29-46 15-22-36 9-13-21 648 12 19-29-47 15-22-36 9-13-21 728 13 20-31-50 16-24-38 9-14-22 828 13 22-33-53 17-25-41 10-15-24 856 13 22-33-54 17-26-42 10-15-24 916 14 23-34-56 18-27-43 10-16-25 984 14 24-36-58 18-28-45 11-16-26 1028 14 24-37-59 19-28-46 11-16-27 1100 15 25-38-61 20-29-47 11-17-27 500 0.016 0.046 0.051 0.077 610 18 21-31-45 16-24-35 9-14-20 675 18 22-33-48 17-26-37 10-15-21 685 18 22-33-48 17-26-37 10-15-22 745 19 23-35-50 18-27-39 10-16-23 795 19 24-36-52 19-28-40 11-16-23 810 19 24-36-52 19-28-41 11-16-24 910 19 26-38-55 20-30-43 12-17-25 1035 20 27-41-59 21-32-46 12-18-27 1070 20 28-42-60 22-32-47 13-19-27 1145 20 29-43-62 22-33-48 13-19-28 1230 21 30-45-64 23-35-50 13-20-29 1285 21 30-46-66 24-35-51 14-21-30 1375 21 31-47-68 24-37-53 14-21-31 600 0.022 0.066 0.074 0.111 732 23 25-35-50 20-27-39 11-16-22 810 24 26-37-52 21-29-41 12-17-24 822 24 27-37-53 21-29-41 12-17-24 894 24 28-39-55 22-30-43 13-17-25 954 24 29-40-57 22-31-44 13-18-26 972 24 29-41-57 22-31-44 13-18-26 1092 25 31-43-61 24-33-47 14-19-27 1242 25 33-46-65 25-36-50 15-21-29 1284 26 33-47-66 26-36-51 15-21-30 1374 26 34-48-68 27-37-53 16-22-31 1476 26 36-50-71 28-39-55 16-22-32 1542 26 37-51-72 28-40-56 16-23-32 1650 27 38-53-75 29-41-58 17-24-34 NC-30 700 0.031 0.090 0.100 0.152 854 28 29-38-54 23-29-42 13-17-24 945 28 31-40-57 24-31-44 14-18-25 959 28 31-40-57 24-31-44 14-18-26 1043 29 32-42-59 25-33-46 15-19-27 1113 29 34-43-61 26-34-48 15-20-28 1134 29 34-44-62 26-34-48 15-20-28 1274 30 36-46-66 28-36-51 16-21-30 1449 30 38-49-70 30-38-54 17-22-31 1498 30 39-50-71 30-39-55 18-23-32 1603 30 40-52-74 31-40-57 18-23-33 1722 31 42-54-76 32-42-59 19-24-34 1799 31 43-55-78 33-43-60 19-25-35 1925 31 44-57-81 34-44-63 20-26-36 Performance notes appear at end of table NC-40 800 0.040 0.117 0.131 0.198 976 32 33-41-57 26-31-45 15-18-26 1080 32 35-43-60 27-33-47 16-19-27 1096 32 35-43-61 27-33-47 16-19-27 1192 33 37-45-63 28-35-49 16-20-29 1272 33 38-46-66 29-36-51 17-21-30 1296 33 38-47-66 30-36-51 17-21-30 1456 34 41-50-70 31-38-54 18-22-32 1656 34 43-53-75 33-41-58 19-24-34 1712 34 44-54-76 34-42-59 20-24-34 1832 34 45-56-79 35-43-61 20-25-35 1968 35 47-58-82 36-45-63 21-26-37 2056 35 48-59-83 37-46-65 22-27-38 2200 35 50-61-86 39-47-67 22-27-39 1000 0.062 0.183 0.204 0.309 1220 39 37-45-64 29-35-50 17-20-29 1350 39 39-48-68 30-37-52 18-21-30 1370 39 39-48-68 30-37-53 18-22-31 1490 39 41-50-71 32-39-55 18-23-32 1590 40 42-52-73 33-40-57 19-23-33 1620 40 43-52-74 33-41-57 19-24-33 1820 40 45-55-78 35-43-61 20-25-35 2070 41 48-59-84 37-46-65 22-27-38 2140 41 49-60-85 38-47-66 22-27-38 2290 41 51-62-88 39-48-68 23-28-40 2460 41 53-64-91 41-50-71 24-29-41 2570 42 54-66-93 42-51-72 24-30-42 2750 42 56-68-96 43-53-75 25-31-43 NC-50 1200 0.090 0.263 0.294 0.445 1464 44 41-50-70 31-39-55 18-22-32 1620 44 43-52-74 33-41-57 19-24-33 1644 44 43-53-75 33-41-58 19-24-34 1788 45 45-55-78 35-43-60 20-25-35 1908 45 46-57-80 36-44-62 21-26-36 1944 45 47-57-81 36-44-63 21-26-36 2184 46 50-61-86 38-47-67 22-27-39 2484 46 53-65-92 41-50-71 24-29-41 2568 46 54-66-93 42-51-72 24-30-42 2748 47 56-68-96 43-53-75 25-31-43 2952 47 58-71-100 45-55-77 26-32-45 3084 47 59-72-102 46-56-79 27-32-46 3300 47 61-75-106 47-58-82 27-34-48 1400 0.122 0.358 0.401 0.606 1708 49 44-54-76 34-42-59 20-24-34 1890 49 46-57-80 36-44-62 21-25-36 1918 49 46-57-81 36-44-62 21-26-36 2086 49 48-59-84 38-46-65 22-27-38 2226 50 50-61-87 39-48-67 23-28-39 2268 50 51-62-88 39-48-68 23-28-39 2548 50 54-66-93 42-51-72 24-30-42 2898 51 57-70-99 44-54-77 26-31-45 2996 51 58-71-101 45-55-78 26-32-45 3206 51 60-74-104 47-57-81 27-33-47 3444 51 62-76-108 48-59-84 28-34-49 3598 52 64-78-110 49-60-85 29-35-50 3850 52 66-81-114 51-63-88 30-36-51 300 / 350 grilles PERFORMANCE DATA NC-20 Nom. Duct Size ( in. ) 48x10 30x16 24x20 22x22 42x12 36x14 24x22 30x18 48x12 36x16 24x24 36x18 36x20 30x24 42x18 42x20 30x28 48x18 36x24 30x30 300 0.006 0.016 0.018 0.028 933 19-30-56 15-23-44 8-14-25 942 19-30-56 15-23-44 8-14-25 966 19-31-57 15-24-44 9-14-26 1029 20-32-59 15-25-46 9-14-27 1050 20-32-60 15-25-46 9-14-27 1125 21-33-62 16-26-48 9-15-28 1266 22-35-65 17-27-51 10-16-29 1413 23-37-69 18-29-54 10-17-31 1482 24-38-71 18-29-55 11-17-32 1548 24-39-72 19-30-56 11-17-33 1653 25-40-75 19-31-58 11-18-34 1698 25-41-76 20-32-59 11-18-34 1782 26-42-78 20-32-60 12-19-35 400 0.010 0.029 0.033 0.049 1244 15 27-40-65 21-31-50 12-18-29 1256 15 27-40-65 21-31-50 12-18-29 1288 15 27-41-66 21-32-51 12-18-30 1372 15 28-42-68 22-33-53 13-19-31 1400 16 28-43-69 22-33-53 13-19-31 1500 16 29-44-71 23-34-55 13-20-32 1688 16 31-47-76 24-36-59 14-21-34 1884 17 33-49-80 26-38-62 15-22-36 1976 17 34-51-82 26-39-63 15-23-37 2064 17 35-52-84 27-40-65 16-23-38 2204 17 36-54-86 28-41-67 16-24-39 2264 18 36-54-87 28-42-68 16-24-39 2376 18 37-56-90 29-43-69 17-25-40 500 0.016 0.046 0.051 0.077 1555 22 33-50-72 26-39-56 15-23-33 1570 22 34-50-73 26-39-56 15-23-33 1610 22 34-51-74 26-40-57 15-23-33 1715 22 35-53-76 27-41-59 16-24-34 1750 22 36-53-77 28-41-60 16-24-35 1875 22 37-55-80 29-43-62 17-25-36 2110 23 39-59-84 30-45-65 18-26-38 2355 23 41-62-89 32-48-69 19-28-40 2470 24 42-63-91 33-49-71 19-28-41 2580 24 43-65-93 33-50-72 19-29-42 2755 24 45-67-96 35-52-75 20-30-43 2830 24 45-68-98 35-53-76 20-31-44 2970 24 46-69-100 36-54-78 21-31-45 600 0.022 0.066 0.074 0.111 1866 27 40-56-79 31-44-62 18-25-36 1884 27 40-56-80 31-44-62 18-25-36 1932 27 41-57-81 32-44-63 18-26-36 2058 28 42-59-83 33-46-65 19-27-38 2100 28 43-60-84 33-46-65 19-27-38 2250 28 44-62-87 34-48-68 20-28-39 2532 28 47-65-93 36-51-72 21-29-42 2826 29 49-69-98 38-54-76 22-31-44 2964 29 51-71-100 39-55-78 23-32-45 3096 29 52-72-102 40-56-79 23-33-46 3306 30 54-75-106 41-58-82 24-34-48 3396 30 54-76-107 42-59-83 24-34-48 3564 30 56-78-110 43-60-85 25-35-49 NC-40 700 0.031 0.090 0.100 0.152 2177 32 47-61-86 36-47-66 21-27-39 2198 32 47-61-86 37-47-67 21-27-39 2254 32 48-62-87 37-48-68 21-28-39 2401 32 49-64-90 38-49-70 22-29-41 2450 32 50-64-91 39-50-71 22-29-41 2625 33 51-67-94 40-52-73 23-30-42 2954 33 55-71-100 42-55-77 25-32-45 3297 33 58-75-106 45-58-82 26-34-48 3458 34 59-76-108 46-59-84 27-34-49 3612 34 60-78-110 47-61-86 27-35-50 3857 34 62-81-114 48-63-88 28-36-51 3962 34 63-82-116 49-63-90 28-37-52 4158 34 65-84-119 50-65-92 29-38-53 800 0.040 0.117 0.131 0.198 2488 36 53-65-92 41-50-71 24-29-41 2512 36 53-65-92 41-50-71 24-29-41 2576 36 54-66-93 42-51-72 24-30-42 2744 36 56-68-96 43-53-75 25-31-43 2800 36 56-69-97 44-53-75 25-31-44 3000 37 58-71-101 45-55-78 26-32-45 3376 37 62-76-107 48-59-83 28-34-48 3768 37 65-80-113 50-62-87 29-36-51 3952 38 67-82-116 52-63-90 30-37-52 4128 38 68-84-118 53-65-92 31-38-53 4408 38 70-86-122 55-67-95 32-39-55 4528 38 71-87-124 55-68-96 32-39-56 4752 38 73-90-127 57-69-98 33-40-57 Performance notes appear at end of table NC-50 1000 0.062 0.183 0.204 0.309 3110 42 59-72-103 46-56-79 27-33-46 3140 42 59-73-103 46-56-80 27-33-46 3220 43 60-74-104 47-57-81 27-33-47 3430 43 62-76-108 48-59-83 28-34-48 3500 43 63-77-109 49-60-84 28-35-49 3750 43 65-80-113 50-62-87 29-36-51 4220 44 69-84-119 53-65-93 31-38-54 4710 44 73-89-126 56-69-98 33-40-57 4940 44 75-91-129 58-71-100 34-41-58 5160 45 76-93-132 59-72-102 34-42-59 5510 45 79-96-136 61-75-106 35-43-61 5660 45 80-98-138 62-76-107 36-44-62 5940 45 82-100-142 63-78-110 37-45-64 1200 0.090 0.263 0.294 0.445 3732 48 65-79-112 50-62-87 29-36-51 3768 48 65-80-113 50-62-87 29-36-51 3864 48 66-81-114 51-63-89 30-36-51 4116 48 68-83-118 53-65-91 31-38-53 4200 48 69-84-119 53-65-92 31-38-54 4500 49 71-87-123 55-68-96 32-39-55 5064 49 76-93-131 59-72-101 34-42-59 5652 50 80-98-138 62-76-107 36-44-62 5928 50 82-100-142 63-78-110 37-45-64 6192 50 84-102-145 65-79-112 38-46-65 6612 50 86-106-149 67-82-116 39-48-67 6792 50 87-107-152 68-83-117 39-48-68 7128 51 90-110-155 69-85-120 40-49-70 1400 0.122 0.358 0.401 0.606 4354 52 70-86-121 54-66-94 32-39-55 4396 53 70-86-122 55-67-94 32-39-55 4508 53 71-87-123 55-68-96 32-39-56 4802 53 74-90-127 57-70-99 33-41-57 4900 53 74-91-129 58-71-100 33-41-58 5250 53 77-94-133 60-73-103 35-42-60 5908 54 82-100-141 63-77-110 37-45-64 6594 54 86-106-149 67-82-116 39-48-67 6916 54 88-108-153 68-84-118 40-49-69 7224 55 90-110-156 70-86-121 41-50-70 7714 55 93-114-161 72-88-125 42-51-73 7924 55 94-116-164 73-90-127 43-52-74 8316 55 97-119-168 75-92-130 44-53-75 H PERFORMANCE DATA 28x28 Core Vel. Nom. Core Vel. Press. Duct Area 0° Area ( ft2 ) Total 22.5° ( ft2 ) Press. 45° cfm NC 3.33 3.11 0° Throw 22.5° (ft) 45° cfm NC 3.36 3.14 0° Throw 22.5° (ft) 45° cfm NC 3.50 3.22 0° Throw 22.5° (ft) 45° cfm NC 3.67 3.43 0° Throw 22.5° (ft) 45° cfm NC 3.75 3.5 0° Throw 22.5° (ft) 45° cfm NC 4.00 3.75 0° Throw 22.5° (ft) 45° cfm NC 4.50 4.22 0° Throw 22.5° (ft) 45° cfm NC 5.00 4.71 0° Throw 22.5° (ft) 45° cfm NC 5.25 4.94 0° Throw 22.5° (ft) 45° cfm NC 5.44 5.16 0° Throw 22.5° (ft) 45° cfm NC 5.83 5.51 0° Throw 22.5° (ft) 45° cfm NC 6.00 5.66 0° Throw 22.5° (ft) 45° cfm NC 6.25 5.94 0° Throw 22.5° (ft) 45° NC-30 Redefine your comfort zone. ™ | www.titus-hvac.com MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD H19 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PERFORMANCE DATA H H20 MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD NC-20 Nom. Duct Size ( in. ) Nom. Duct Area ( ft2 ) 42x24 36x28 7.00 46x22 7.03 32x32 7.11 36x30 7.50 48x24 36x32 8.00 34x34 8.03 36x34 8.50 42x30 8.75 36x36 9.00 42x34 48x30 10.00 38x38 10.03 42x36 10.50 46x34 10.86 Core Vel. 300 Vel. Press. 0.006 0° 0.016 Total 22.5° 0.018 Press. 45° 0.028 1998 cfm NC 6.66 28-44-82 0° Throw 22.5° 21-34-64 12-20-37 (ft) 45° 2004 cfm NC 6.68 28-44-82 0° Throw 22.5° 21-34-64 12-20-37 (ft) 45° 2034 cfm NC 6.78 28-45-83 0° Throw 22.5° 22-34-64 12-20-37 (ft) 45° 2148 cfm NC 7.16 29-46-85 0° Throw 22.5° 22-35-66 13-21-38 (ft) 45° 2289 cfm NC 7.63 29-47-88 0° Throw 22.5° 23-37-68 13-21-40 (ft) 45° 2304 cfm NC 7.68 30-47-88 0° Throw 22.5° 23-37-68 13-21-40 (ft) 45° 2442 cfm NC 8.14 30-49-91 0° Throw 22.5° 24-38-70 14-22-41 (ft) 45° 2514 cfm 11 NC 8.38 31-49-92 0° Throw 22.5° 24-38-71 14-22-41 (ft) 45° 2589 cfm 11 NC 8.63 31-50-94 0° Throw 22.5° 24-39-72 14-23-42 (ft) 45° 2880 cfm 11 NC 9.6 33-53-99 0° Throw 22.5° 26-41-76 15-24-44 (ft) 45° 2892 cfm 11 NC 9.64 33-53-99 0° Throw 22.5° 26-41-77 15-24-44 (ft) 45° 3030 cfm 11 NC 10.1 34-54-101 0° Throw 22.5° 26-42-78 15-24-46 (ft) 45° 3135 cfm 11 NC 10.45 34-55-103 0° Throw 22.5° 27-43-80 16-25-46 (ft) 45° Core Area ( ft2 ) NC-30 NC-40 NC-50 400 0.010 0.029 0.033 0.049 500 0.016 0.046 0.051 0.077 600 0.022 0.066 0.074 0.111 700 0.031 0.090 0.100 0.152 800 0.040 0.117 0.131 0.198 1000 0.062 0.183 0.204 0.309 1200 0.090 0.263 0.294 0.445 1400 0.122 0.358 0.401 0.606 2664 18 39-59-95 30-46-74 18-26-43 2672 18 39-59-95 30-46-74 18-27-43 2712 18 40-59-96 31-46-74 18-27-43 2864 19 41-61-98 32-47-76 18-27-44 3052 19 42-63-102 33-49-79 19-28-46 3072 19 42-63-102 33-49-79 19-28-46 3256 19 43-65-105 34-50-81 20-29-47 3352 19 44-66-106 34-51-82 20-30-48 3452 19 45-67-108 35-52-84 20-30-49 3840 20 47-71-114 36-55-88 21-32-51 3856 20 47-71-114 37-55-88 21-32-51 4040 20 48-72-117 37-56-91 22-33-53 4180 20 49-74-119 38-57-92 22-33-53 3330 25 49-74-106 38-57-82 22-33-48 3340 25 49-74-106 38-57-82 22-33-48 3390 25 49-74-107 38-57-83 22-33-48 3580 25 51-76-110 39-59-85 23-34-50 3815 25 52-79-114 41-61-88 24-35-51 3840 25 53-79-114 41-61-88 24-36-51 4070 26 54-81-117 42-63-91 24-37-53 4190 26 55-82-119 43-64-92 25-37-54 4315 26 56-84-121 43-65-94 25-38-54 4800 26 59-88-127 46-68-99 26-40-57 4820 26 59-88-128 46-69-99 27-40-57 5050 27 60-91-131 47-70-101 27-41-59 5225 27 61-92-133 48-71-103 28-41-60 3996 30 59-82-116 46-64-90 26-37-52 4008 30 59-82-116 46-64-90 27-37-52 4068 30 59-83-117 46-64-91 27-37-53 4296 31 61-85-121 47-66-93 27-38-54 4578 31 63-88-124 49-68-96 28-40-56 4608 31 63-88-125 49-68-97 28-40-56 4884 31 65-91-128 50-70-100 29-41-58 5028 31 66-92-130 51-71-101 30-41-59 5178 31 67-94-132 52-72-103 30-42-60 5760 32 71-99-140 55-76-108 32-44-63 5784 32 71-99-140 55-77-108 32-44-63 6060 32 72-101-143 56-78-111 33-46-64 6270 32 74-103-146 57-80-113 33-46-66 4662 35 69-89-126 53-69-97 31-40-56 4676 35 69-89-126 53-69-97 31-40-57 4746 35 69-90-127 54-69-98 31-40-57 5012 35 71-92-130 55-71-101 32-41-59 5341 35 73-95-134 57-74-104 33-43-60 5376 36 74-95-135 57-74-104 33-43-61 5698 36 76-98-139 59-76-108 34-44-62 5866 36 77-100-141 60-77-109 35-45-63 6041 36 78-101-143 61-78-111 35-45-64 6720 36 82-107-151 64-83-117 37-48-68 6748 36 83-107-151 64-83-117 37-48-68 7070 37 85-109-155 65-85-120 38-49-70 7315 37 86-111-157 67-86-122 39-50-71 5328 39 77-95-134 60-74-104 35-43-60 5344 39 78-95-134 60-74-104 35-43-60 5424 39 78-96-135 61-74-105 35-43-61 5728 39 80-98-139 62-76-108 36-44-63 6104 39 83-102-144 64-79-111 37-46-65 6144 40 83-102-144 64-79-112 37-46-65 6512 40 86-105-148 66-81-115 39-47-67 6704 40 87-106-151 67-82-117 39-48-68 6904 40 88-108-153 68-84-118 40-49-69 7680 40 93-114-161 72-88-125 42-51-73 7712 40 93-114-161 72-88-125 42-51-73 8080 41 95-117-165 74-91-128 43-53-74 8360 41 97-119-168 75-92-130 44-53-76 6660 46 87-106-150 67-82-116 39-48-68 6680 46 87-106-150 67-82-116 39-48-68 6780 46 87-107-151 68-83-117 39-48-68 7160 46 90-110-156 70-85-121 40-50-70 7630 46 93-114-161 72-88-124 42-51-72 7680 46 93-114-161 72-88-125 42-51-73 8140 46 96-117-166 74-91-129 43-53-75 8380 47 97-119-168 75-92-130 44-54-76 8630 47 99-121-171 76-94-132 44-54-77 9600 47 104-127-180 81-99-140 47-57-81 9640 47 104-128-181 81-99-140 47-57-81 10100 47 107-131-185 83-101-143 48-59-83 10450 47 109-133-188 84-103-146 49-60-85 7992 51 95-116-164 74-90-127 43-52-74 8016 51 95-116-165 74-90-128 43-52-74 8136 51 96-117-166 74-91-129 43-53-75 8592 51 98-121-170 76-93-132 44-54-77 9156 52 102-124-176 79-96-136 46-56-79 9216 52 102-125-176 79-97-137 46-56-79 9768 52 105-128-182 81-100-141 47-58-82 10056 52 106-130-184 82-101-143 48-59-83 10356 52 108-132-187 84-103-145 49-60-84 11520 53 114-140-197 88-108-153 51-63-89 11568 53 114-140-198 88-108-153 51-63-89 12120 53 117-143-202 91-111-157 53-64-91 12540 53 119-146-206 92-113-160 53-66-93 9324 56 102-126-178 79-97-138 46-56-80 9352 56 103-126-178 80-97-138 46-57-80 9492 56 103-127-179 80-98-139 47-57-81 10024 56 106-130-184 82-101-143 48-59-83 10682 56 110-134-190 85-104-147 49-60-86 10752 56 110-135-191 85-104-148 50-61-86 11396 56 113-139-196 88-108-152 51-62-88 11732 57 115-141-199 89-109-154 52-63-90 12082 57 117-143-202 90-111-157 53-64-91 13440 57 123-151-213 95-117-165 55-68-96 13496 57 123-151-214 96-117-166 55-68-96 14140 57 126-155-219 98-120-169 57-70-98 14630 58 128-157-222 99-122-172 58-71-100 Performance notes appear at end of table 300 / 350 grilles PERFORMANCE DATA NC-20 Nom. Duct Size ( in. ) Nom. Duct Core Area Area ( ft2 ) 2 ( ft ) 42x38 11.08 10.67 40x40 11.11 10.7 48x36 12.00 11.57 42x42 12.25 11.82 44x44 13.44 12.99 48x42 14.00 13.54 46x46 14.69 14.22 48x46 15.33 14.85 48x48 16.00 15.50 NC-40 NC-50 300 0.006 0.016 0.018 0.028 400 0.010 0.029 0.033 0.049 500 0.016 0.046 0.051 0.077 600 0.022 0.066 0.074 0.111 700 0.031 0.090 0.100 0.152 800 0.040 0.117 0.131 0.198 1000 0.062 0.183 0.204 0.309 1200 0.090 0.263 0.294 0.445 1400 0.122 0.358 0.401 0.606 3201 12 35-56-104 27-43-81 16-25-47 3210 12 35-56-104 27-43-81 16-25-47 3471 12 36-58-108 28-45-84 16-26-49 3546 12 37-59-109 28-46-85 16-26-49 3897 12 38-62-115 30-48-89 17-28-52 4062 13 39-63-117 30-49-91 18-28-53 4266 13 40-64-120 31-50-93 18-29-54 4455 13 41-66-123 32-51-95 18-30-55 4650 13 42-67-125 33-52-97 19-30-56 4268 20 50-74-120 38-58-93 22-34-54 4280 20 50-75-120 39-58-93 22-34-54 4628 21 52-78-125 40-60-97 23-35-56 4728 21 52-78-126 40-61-98 24-35-57 5196 21 55-82-133 42-64-103 25-37-60 5416 21 56-84-135 43-65-105 25-38-61 5688 21 57-86-139 44-67-107 26-39-62 5940 22 59-88-142 45-68-110 26-40-64 6200 22 60-90-145 46-70-112 27-40-65 5335 27 62-93-134 48-72-104 28-42-60 5350 27 62-93-134 48-72-104 28-42-61 5785 27 65-97-140 50-75-108 29-44-63 5910 27 65-98-141 51-76-110 29-44-64 6495 28 68-103-148 53-80-115 31-46-67 6770 28 70-105-151 54-81-117 31-47-68 7110 28 72-107-155 56-83-120 32-48-70 7425 28 73-110-158 57-85-123 33-49-71 7750 28 75-112-162 58-87-125 34-50-73 6402 32 74-104-147 58-81-114 34-47-66 6420 32 75-104-147 58-81-114 34-47-66 6942 33 78-108-153 60-84-119 35-49-69 7092 33 78-109-155 61-85-120 35-49-70 7794 33 82-115-162 64-89-126 37-52-73 8124 33 84-117-166 65-91-128 38-53-75 8532 33 86-120-170 67-93-132 39-54-76 8910 34 88-123-174 68-95-134 40-55-78 9300 34 90-125-177 70-97-137 40-56-80 7469 37 87-112-159 67-87-123 39-51-71 7490 37 87-113-159 67-87-123 39-51-72 8099 37 90-117-165 70-91-128 41-53-74 8274 37 91-118-167 71-92-130 41-53-75 9093 38 96-124-175 74-96-136 43-56-79 9478 38 98-127-179 76-98-139 44-57-81 9954 38 100-130-183 78-101-142 45-58-83 10395 38 102-133-187 79-103-145 46-60-84 10850 38 105-135-192 81-105-148 47-61-86 8536 41 98-120-170 76-93-132 44-54-76 8560 41 98-120-170 76-93-132 44-54-77 9256 41 102-125-177 79-97-137 46-56-80 9456 41 103-126-179 80-98-139 46-57-80 10392 42 108-133-187 84-103-145 49-60-84 10832 42 110-135-191 86-105-148 50-61-86 11376 42 113-139-196 88-107-152 51-62-88 11880 42 116-142-200 90-110-155 52-64-90 12400 42 118-145-205 92-112-159 53-65-92 10670 48 110-134-190 85-104-147 49-60-85 10700 48 110-134-190 85-104-147 49-61-86 11570 48 114-140-198 88-108-153 51-63-89 11820 48 115-141-200 89-110-155 52-64-90 12990 48 121-148-210 94-115-162 54-67-94 13540 49 124-151-214 96-117-166 56-68-96 14220 49 127-155-219 98-120-170 57-70-99 14850 49 129-158-224 100-123-174 58-71-101 15500 49 132-162-229 102-125-177 59-73-103 12804 53 120-147-208 93-114-161 54-66-94 12840 53 120-147-208 93-114-161 54-66-94 13884 53 125-153-217 97-119-168 56-69-97 14184 53 126-155-219 98-120-170 57-70-99 15588 54 133-162-230 103-126-178 60-73-103 16248 54 135-166-234 105-128-182 61-75-105 17064 54 139-170-240 107-132-186 62-76-108 17820 54 142-174-245 110-134-190 64-78-110 18600 55 145-177-251 112-137-194 65-80-113 14938 58 130-159-225 101-123-174 58-71-101 14980 58 130-159-225 101-123-174 58-72-101 16198 58 135-165-234 105-128-181 61-74-105 16548 58 137-167-236 106-130-183 61-75-106 18186 58 143-175-248 111-136-192 64-79-112 18956 59 146-179-253 113-139-196 66-81-114 19908 59 150-183-259 116-142-201 67-83-117 20790 59 153-187-265 119-145-205 69-84-119 21700 59 156-192-271 121-148-210 70-86-122 • 0°, 22.5° & 45° represent blade deflection angles • Performance data is based on duct sizes in bold, the performance varies slightly for duct sizes not shown in bold • See the section, Engineering Guidelines, for drop information when selecting larger supply grilles for cooling purposes • See the “Performance Notes” portion in this section for notes and correction factors • See the section, Engineering Guidelines, for catalog throw information • Each NC value represents the noise criteria curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7, with a room absorption of 10 dB, re 10-12 watts H PERFORMANCE DATA Core Vel. Vel. Press. 0° Total 22.5° Press. 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° cfm NC 0° Throw 22.5° (ft) 45° NC-30 Redefine your comfort zone. ™ | www.titus-hvac.com MODELS: 300R, 300F, 300R-SS, 300R-HD, 301R, 301F, 301R-SS AND 301R-HD PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD H21 300 / 350 grilles • Performance data includes damper 1500 20 0 10 20 30 Throw, Ft. 40 50 (Side view of air jet leaving wall mounted grille) Drop Versus Throw without Ceiling Effect TYPICAL 100 fpm ENVELOPE 0 Drop, Ft. 100 CFM 400 10 0 fp 1000 ITY OC 20 CIT Y 500 1500 EL 10 ET V ELO 700 800 TV 0 mJ 1000 600 JE 15 20 150 200 5 pm All Titus supply grilles can be applied to variable air volume systems with excellent results. For detailed selection methods, consult your Titus representative or the Engineering Guidelines section of this catalog. 700 500 1000 0f VARIABLE AIR VOLUME APPLICATIONS CITY 2000 CFM 15 • Bold dividing lines on H17-H21 denote ranges of NC values • The stated deflection settings refer to the horizontal setting of the blade’s deflection angle. For a 20° upward deflection, use the throw rating for the 0° setting and the total pressure for the 22½° horizontal setting. 10 ET VE LO TY • Each NC value represents the noise criterion curve that will not be exceeded by the sound pressure in any of the octave bands, 2 through 7. Each NC value is based on a room absorption of 10 dB, re 10-12 watts. Each NC value is further based on grille operating at a 0° deflection. Settings of 22½° or 45°, increase the stated sound levels by 1 or 7 NC, respectively. 5 fpm J 1000 I OC EL TV JE • Throw values given are for isothermal terminal velocities of 150, 100 and 50 fpm 1500 100 CFM 200 400 600 800 pm • Core velocities are in feet per minute 0 Drop, Ft. • All pressures are in inches of water • For additional information concerning drop and throw, see the Engineering Guidelines section of this catalog PERFORMANCE DATA TYPICAL 100 fpm ENVELOPE • Data obtained from tests conducted in accordance with ANSI/ASHRAE Standard 70-2006 • Dash (—) in space indicates NC value less than 10 H22 Drop Versus Throw Showing Ceiling Effect - 20°F DT Cooling 30 H PERFORMANCE NOTES 0f 30 Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA FM 2000 C 30 Throw, Ft. 40 (Side view of air jet leaving wall mounted grille) Correction Factors for 300/301 Supply Grilles Model Damper Ak /Ac Throw Total Pressure NC 300R, 300F With 0.77 1.00 1.00 0 301R, 301F Without 0.82 0.98 0.88 -2 Note: Throw and total pressure corrections are multipliers. The NC correction is an addition. Ak is the flow factor. Ac is the core area from the main table. 50 300 / 350 grilles PERFORMANCE DATA 0B Horizontal Deflection 10 The spread angle also affects the airstream drop amount. Always consider for any given temperature, volume and core velocity; the wider spread results in a smaller drop. See section, Engineering Guidelines, for more drop, throw and spread relationship information. Titus grilles can be selected with a single set of blades for adjusting either horizontal or vertical deflection, or with two sets of blades for adjusting both horizontal and vertical deflections. 0 DEFLECTION 50 fpm 0 Typical 100 fpm Envelope 150 fpm 5 10 0 10 20 30 40 50 THROW, FEET Spread versus throw at 0° horizontal deflection angle (Plan view of air jet leaving wall mounted grille). 22½B Horizontal Deflection 10 22 1/2 0 22 1/ 2 5 221/2 DEFLECTION 50 fpm Typical 100 fpm Envelope 0 150 fpm 5 10 0 10 20 30 40 H THROW, FEET Spread versus throw at 22½° horizontal deflection angle (Plan view of air jet leaving wall mounted grille). 20 45B Horizontal Deflection 15 50 fpm 45 0 45 45 DEFLECTION Spread versus throw at 45° horizontal deflection angle (Plan view of air jet leaving wall mounted grille). 5 Typical 100 fpm Envelope 0 150 fpm 5 10 15 PERFORMANCE DATA 10 SPREAD, FEET Notice the outer shaded area represents the 50 fpm isovel, the white area, the 100 fpm isovel, and the inner area, the 150 fpm isovel. 0 5 SPREAD, FEET The figures depicting deflection, throw and drop are based on actual tests conducted by Titus. They show the relationship of spread to throw for a typical high side-wall supply outlet selection. SPREAD, FEET SUPPLY GRILLES Redefine your comfort zone. ™ | www.titus-hvac.com HORIZONTAL DEFLECTION (SPREAD) 20 0 5 10 15 20 25 THROW, FEET H23 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com 300 / 350 Supply Grilles (continued) R-301F / R-300F R-301F • Grilles can be surface mounted or duct mounted. Mounting bracket is installed and grille is inserted and rotated for quick mounting. • ¾” blade spacing • Single deflection • Adjustable louvers • All aluminum construction with duct diameters from 6” thru 20” in even increments R-300FS • Grilles can be surface mounted or duct mounted. Mounting bracket is installed and grille is inserted and rotated for quick mounting. R-301F R-300F • ¾” blade spacing • Double deflection • Adjustable louvers • All aluminum construction with duct diameters from 6” thru 20” in even increments prevents metriccorrosion sizes H See website for Specifications MODELS: Single Deflection Model R-301F DUCT MINUS 1/16" Double Deflection Model R-300F FINISHES: 6 3/4 DUCT MINUS 1/16" OVERVIEW 3 /4” Blade Spacing / Aluminum B R-301F / R-300F 3" 8 SECTION A-A 6 3/4 MOUNTING RING Titus’ R-300F/R-301F series is a round all-aluminum supply grille offering. These distinctive grilles areSECTION the perfect A-A complement to our 3 " 8 standard 300 series that will meet any application requirements. H24 M B Standard Finish - #26 White Optional Finishes - #04 Mill / #84 Black GRILLE DAMPER A Damper option A A A GR 300 / 350 grilles DIMENSIONS Single Deflection Model R-301F A 3" 4 SECTION A-A Double Deflection Model R-300F 3 48" A 3" 4 A 3" 4 A 6 87⁄8 8 107⁄16 10 1211⁄16 12 1415⁄16 14 167⁄8 16 187⁄8 18 2011⁄16 20 2213⁄16 H DIMENSIONS NOM DUCT DIA MINUS 7/16" A Nominal Duct Diameter 1 58 " NOM DUCT DIA A NOMINAL DUCT DIAMETER A NOM DUCT DIA MINUS 1/8" NOM DUCT DIA MINUS 7/16" 3 48" Redefine your comfort zone. ™ | www.titus-hvac.com R-301F / R-300F DIMENSIONS 5 18" SECTION A-A All dimensions are in inches H25 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA H MODELS: R-301F / R-300F Duct Velocity, fpm Nominal Nom. Duct 2 Duct Size Area (ft ) Velocity Pressure, IN WG 6 Ak=.125 0.169 8 Ak=.312 0.349 10 Ak=.499 0.545 12 Ak=.730 0.785 14 Ak=1.00 1.069 16 Ak=1.323 1.396 18 Ak=1.685 PERFORMANCE DATA 20 Ak=1.572 H26 1.767 2.182 300 400 500 600 700 800 900 1000 1100 1200 1300 0.006 0.010 0.016 0.022 0.031 0.040 0.050 0.062 0.075 0.090 0.105 Air Flow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Air Flow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Air Flow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Air Flow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Air Flow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT Air Flow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT 38 0.004 3-4-8 69 0.004 3-5-10 110 0.004 3-5-10 161 0.004 4-6-12 223 0.004 4-6-12 295 0.003 4-7-13 50 0.007 4-6-12 92 0.007 4-7-13 147 0.007 5-7-14 215 0.007 5-8-16 297 0.006 6-9-17 394 0.006 6-9-17 63 0.011 5-7-14 115 0.011 5-8-16 183 0.010 6-9-17 269 0.010 7-10-20 372 0.010 7-11-21 492 0.009 7-11-22 75 0.016 6-9-17 138 0.015 6-10-19 220 0.015 7-11-21 323 0.015 8-12-24 446 0.014 8-13-25 590 0.014 9-13-26 88 0.021 6-10-19 161 0.021 7-11-22 257 0.021 8-12-24 376 0.020 9-14-28 520 0.019 10-15-29 689 0.018 10-15-30 100 0.028 7-11-21 184 0.027 8-13-25 293 0.027 10-15-29 430 0.026 10-16-31 595 0.025 11-17-33 787 0.024 12-18-35 113 0.035 8-13-25 206 0.035 10-15-29 330 0.034 11-16-32 484 0.033 12-18-36 669 0.032 13-19-38 886 0.030 13-20-39 125 0.044 20-28-40 229 0.043 10-16-31 367 0.042 12-18-36 538 0.041 13-20-39 743 0.039 14-21-42 984 0.038 15-22-44 138 0.053 10-15 -30 252 0.052 12-18-35 403 0.051 13-20-39 592 0.049 15-22-44 818 0.047 15-23-45 1082 0.045 22 16-24-48 150 0.063 11-17-34 275 0.062 13-19-38 440 0.060 14-22-43 645 0.059 16-24-47 892 0.056 22 17-25-50 1181 0.054 25 17-26-52 163 0.074 13-19-38 298 0.072 14-21-41 477 0.071 15-23-46 699 0.069 21 17-26-51 966 0.066 25 18-27-54 1279 0.063 28 19-29-57 Air Flow, cfm Total Pressure, IN WG NC (Noise Criteria) Throw, FT 378 0.003 5-7-14 504 0.006 6-9-18 630 0.009 8-12-23 756 882 1008 1134 1260 1386 0.013 0.018 0.023 0.029 0.036 0.043 22 26 9-14-28 11-16-32 12-19-37 14-21-41 15-23-45 17-26-51 1512 0.051 29 18-28-55 1638 0.060 32 20-30-59 Air Flow, cfm Total Pressure, IN WG NC (Noise Criteria) 472 0.003 5-8-15 629 0.005 6-10-19 786 943 1101 1258 1415 1572 1730 0.008 0.012 0.016 0.021 0.027 0.033 0.040 21 25 28 8-12-24 10-15-30 11-17-34 13-19-38 14-22-43 16-24-47 18-27-53 1887 0.048 31 19-29-58 2044 0.057 34 21-31-62 • Throw values given are for terminal velocities of 150, 100 and 50 fpm and for isothermal conditions. Data is for double deflection model set at bi-directional spread pattern of 22B. See the section, Engineering Guidelines for additional throw information. • The throw values listed are without ceiling effect. For throw values with ceiling effect apply a correction factor of 1.4. • All pressures given are in inches of water • Velocity pressure is based on inlet duct area and velocity • To obtain static pressure, subtract the velocity pressure from the total pressure • Noise criteria (NC) is based on an absorption in the room of 10 db 10-12 watts evaluated in octaves in range from 125 to 4000 Hz. Dash (-) in space denotes an NC value of less than 20. • Data was obtained by tests conducted in accordance with standard ANSI/ASHRAE 70-2006 under isothermal conditions. Actual performance with flexible duct may vary. See the section, Engineering Guidelines for additional information. 300 / 350 Return Grilles 300 / 350 grilles 350RL • ¾” blade spacing • 35° fixed deflection • Reinforced corners • Blades parallel to the long dimension 350RS • Same as 350RL with blades parallel to the short dimension 350ZRL • ¾” blade spacing • 0° fixed deflection 350 (RL /RS) 350 (ZRL / ZRS) Redefine your comfort zone. ™ | www.titus-hvac.com 350 (RL-RS / ZRL-ZRS) • Reinforced corners • Blades parallel to the long dimension 350ZRS • Same as 350ZRL with blades parallel to the short dimension fire ratedsizes metric MODELS: 35B Deflection Models 350RL 350RS 0B Deflection Models 350ZRL 350ZRS See website for Specifications • Countersunk Screw Holes • #8 x 1¼” Long Phillips Flat Head Sheet Metal Screws, Painted White • Optional Steel Opposed-Blade Damper H FINISH: Standard Finish - #26 White OVERVIEW 3 /4” Blade Spacing / Steel For Performance Data, refer to page H37 for 350R, and page H39 for 350ZR. PRODUCTS INCLUDE • Material: Roll-formed Steel Border and Blades • Welded Border • Available Border Types: #1 - Surface Mount #2 - Snap-In #3 - Lay-In #4 - Spline 350 (RL-RS / ZRL-ZRS) Titus’ 300 / 350 Series return grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. H27 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 350 (RL-RS / ZRL-ZRS) DIMENSIONS 35B Deflection Models 350RL / RS - Border Type 1 D plus 1¾" D minus ¾" 1¼" ¾" 9/16" Screwdriver Slot Operator For Optional Damper Optional Opposed Blade Damper 35° ¼" 1¼" Duct minus ½" Nominal Duct Size D" 2൦" Note: When Damper Is Full Open, Add " To Overall Depth. Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost H 0B Deflection Models 350ZRL / ZRS - Border Type 1 D plus 1¾" 9/16" 1¼" D minus ¾" ¾" 1¼" Screwdriver Slot Operator For Optional Damper DIMENSIONS Optional Opposed Blade Damper H28 ¼" 2½" Duct minus ½" Nominal Duct Size D" Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost All dimensions are in inches Note: When Damper Is Full Open, Add " To Overall Depth. 300 / 350 Return Grilles (continued) 300 / 350 grilles 350FL • Great for areas with high humidity or subject to moisture • ¾” blade spacing • 35° fixed deflection • Reinforced corners • Blades parallel to the long dimension • MRI compatible 350FS • Same as 350FL with blades parallel to the short dimension 350ZFL • Great for areas with high humidity or subject to moisture • ¾” blade spacing 350 (FL /FS) 350 (ZFL / ZFS) Redefine your comfort zone. ™ | www.titus-hvac.com 350 (FL-FS / ZFL-ZFS) 350ZFS • Same as 350ZFL with front blades parallel to the short dimension • 0° fixed deflection • Reinforced corners • Blades parallel to the long dimension • MRI compatible MODELS: 35B Deflection Models 350FL 350FS metric sizes humid areas MRI compatible See website for Specifications • #8 x 1¼” Long Phillips Flat Head Sheet Metal Screws, Painted White • Optional Steel or Aluminum Opposed-Blade Damper H 0B Deflection Models 350ZFL 350ZFS FINISH: Standard Finish - #26 White OVERVIEW 3 /4” Blade Spacing / Aluminum For Performance Data, refer to page H37 for 350R, and page H39 for 350ZR. PRODUCTS INCLUDE • Material: Roll-formed Aluminum Border and Blades on sizes up to 24 x 24 inches. Extruded Aluminum Border for Larger Sizes. • Welded Border. • Available Border Types: #1 - Surface Mount #2 - Snap-In #3 - Lay-In #4 - Spline • Countersunk Screw Holes 350 (FL-FS / ZFL-ZFS) Titus’ 300 / 350 Series return grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. H29 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 350 (FL-FS / ZFL-ZFS) DIMENSIONS 35° Deflection Models: 350FL / 350FS - Border Type 1 D plus 1¾" D minus ¾" 1¼" ¾" 9/16" Screwdriver Slot Operator For Optional Damper Optional Opposed Blade Damper 35° ¼" 1¼" Duct minus ½" Nominal Duct Size D" 2½" Note: When Damper Is Full Open, Add " To Overall Depth. Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost H 0° Deflection Models: 350ZFL / 350ZFS - Border Type 1 D plus 1¾" 9/16" 1¼" D minus ¾" ¾" 1¼" Screwdriver Slot Operator For Optional Damper DIMENSIONS Optional Opposed Blade Damper H30 ¼" 2½" Duct minus ½" Nominal Duct Size D" Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost All dimensions are in inches Note: When Damper Is Full Open, Add " To Overall Depth. 300 / 350 Return Grilles (continued) 300 / 350 grilles 350RL-SS • Great for use in corrosive environments • ¾” blade spacing • 45° fixed deflection • Blades parallel to the long dimension • Available in 316 Stainless Steel 350RS-SS • Same as 350RL-SS with blades parallel to short dimension • Tightly mitered corners • Uniform polish finish 350 (RL-SS) 350 (RS-SS) Redefine your comfort zone. ™ | www.titus-hvac.com 350 (RL-SS / RS-SS) • Hollow airfoil blades anchored with nylon pivots for tight fit and no rattling • Exclusive tooling and roll-forming equipment means metal is not contaminated with fragments of steel or aluminum metric sizes MODELS: 45B Deflection Models 350RL-SS 350RS-SS prevents corrosion See website for Specifications H FINISH: Standard Finish - #04 Mill OVERVIEW 3 /4” Blade Spacing / Stainless Steel Titus’ 300 / 350 Series return grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. For Performance Data, refer to page H33. • Material: 304 Stainless Steel Border and Blades. • Available Border Types: #1 - Surface Mount • Countersunk Screw Holes • #8 x 1¼” Long 304 Stainless Steel Phillips Flat Head Sheet Metal Screws • Optional 304 Stainless Steel Opposed-Blade Damper 350 (RL-SS / RS-SS) PRODUCTS INCLUDE H31 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 350 (RL-SS / RS-SS) DIMENSIONS 45° Deflection Models: 350RL-SS / 350RS-SS - Border Type 1 D plus 1⅝" 1⅜ " ¾" 45 ° 1 5 / 64 " Duct Size minus ¼" H Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost STAINLESS STEEL MATERIAL PROPERTIES AND CHARACTERISTICS TYPE 304 STAINLESS STEEL Type 304, with its chromium-nickel content and low carbon, is the most versatile and widely used type of stainless steel. It possesses characteristics that provide resistance to oxidation and corrosion. Type 304 stainless steel provides good resistance to moderately acidic or caustic solutions. DIMENSIONS TYPE 316 STAINLESS STEEL H32 Type 316 is a chromium-nickel stainless and heat resisting steel with superior corrosion resistance, as compared to other chromium-nickel steels, when exposed to many types of chemical corrosives such as sea water, brine solutions and the like. The addition of two percent molybdenum makes type 316 more resistant to corrosion and oxidation. Type 316 is considerably more resistant to solutions of sulfuric acid, chlorides, bromides and fatty acids at high temperatures. In the manufacture of pharmaceuticals, stainless steels containing molybdenum are required in order to avoid excessive metallic contamination. STAINLESS STEEL APPLICATIONS Stainless steel is the number one preferred material for those situations where corrosion, rusting or deterioration is a problem. However, that is just where the uses begin. When a high-tech effect is desired in a restaurant, hotel or corporate lobby, nothing beats the clean lines and aesthetic beauty of stainless steel. There are literally hundreds of additional applications, some include: • • • • • • • • • • • • • • Pharmaceutical Plants Food Processing Plants Showers and Locker Rooms Commercial Kitchens Wastewater Treatment Plants Bio-Medical Manufacturing Coastal Areas Industrial Applications Clean Rooms Laboratories Hospitals Dairy Facilities Beverage Plants Chemical Plants and Schools All dimensions are in inches 300 / 350 Return Grilles (continued) 300 / 350 grilles 355RL • ½” blade spacing • 35° fixed deflection • Reinforced corners • Blades parallel to the long dimension 355RS • Same as 355RL with blades parallel to the short dimension 355ZRL • ½” blade spacing • 0° fixed deflection 355 (RL /RS) 355 (ZRL / ZRS) Redefine your comfort zone. ™ | www.titus-hvac.com 355 (RL-RS / ZRL-ZRS) • Reinforced corners • Blades parallel to the long dimension 355ZRS • Same as 355ZRL with front blades parallel to the short dimension metric sizes MODELS: 35B Deflection Models 355RL 355RS 0B Deflection Models 355ZRL 355ZRS See website for Specifications • Countersunk Screw Holes • #8 x 1¼” Long Phillips Flat Head Sheet Metal Screws, Painted White • Optional Steel Opposed-Blade Damper H FINISH: Standard Finish - #26 White OVERVIEW 1 /2” Blade Spacing / Steel For Performance Data, refer to page H37 for 355R, and page H39 for 355ZR. PRODUCTS INCLUDE • Material: Roll-formed Steel Border and Blades • Welded Border • Available Border Types: #1 - Surface Mount #2 - Snap-In #3 - Lay-In #4 - Spline 355 (RL-RS / ZRL-ZRS) Titus’ 300 / 350 Series return grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. H33 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 355 (RL-RS / ZRL-ZRS) DIMENSIONS 35° Deflection Models: 355RL / 355RS - Border Type 1 D plus 113/16" 17/16" D minus ¾" 9/16" ½" 11/8" 2½" D minus ½" Nominal Duct Size D" 0° Deflection Models: 355ZRL / 355ZRS - Border Type 1 D plus 1¾" 9/16" D minus ¾" ½" Screwdriver Slot Operator For Optional Damper Optional Opposed Blade Damper ¼" 1¼" 2½" D minus ½" Nominal Duct Size D" DIMENSIONS Note: When Damper Is Full Open, Add " To Overall Depth. Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost 1¼" H34 /16" 3 Screwdriver Slot Operator For Optional Damper Optional Opposed Blade Damper H 35° Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost All dimensions are in inches Note: When Damper Is Full Open, Add ⅜" To Overall Depth. 300 / 350 grilles 300 / 350 Return Grilles (continued) 355FL • Great for areas with high humidity or subject to moisture • ½” blade spacing • 35° fixed deflection • Reinforced corners • Blades parallel to the long dimension • MRI compatible 355FS • Same as 355FL with blades parallel to the short dimension 355ZFL • Great for areas with high humidity or subject to moisture • ½” blade spacing • 0° fixed deflection 355 (FL /FS) 355 (ZFL / ZFS) • MRI compatible Redefine your comfort zone. ™ | www.titus-hvac.com 355 (FL-FS / ZFL-ZFS) 355ZFS • Same as 355ZFL with front blades parallel to the short dimension • Reinforced corners • Blades parallel to the long dimension metric sizes MODELS: 35B Deflection Models 355FL 355FS humid areas MRI compatible See website for Specifications • #8 x 1¼” Long Phillips Flat Head Sheet Metal Screws, Painted White • Optional Steel or Aluminum Opposed-Blade Damper H 0B Deflection Models 355ZFL 355ZFS FINISH: Standard Finish - #26 White OVERVIEW 1 /2” Blade Spacing / Aluminum For Performance Data, refer to page H37 for 355R, and page H39 for 355ZR. PRODUCTS INCLUDE • Material: Roll-formed Aluminum Border and Blades on sizes up to 24 x 24 inches. Extruded Aluminum Border for Larger Sizes. • Welded Border • Available Border Types: #1 - Surface Mount #2 - Snap-In #3 - Lay-In #4 - Spline • Countersunk Screw Holes 355 (FL-FS / ZFL-ZFS) Titus’ 300 / 350 Series return grilles define the standard for the industry. With high quality and competitive pricing these grilles form the back bone of a standard offering that will meet any application requirements. H35 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com DIMENSIONS 355 (FL-FS / ZFL-ZFS) DIMENSIONS 35° Deflection Models: 355FL / 355FS - Border Type 1 D plus 1¾" D minus ¾" 1¼" 9/16" ½" 1¼" 2½" D minus ½" Nominal Duct Size D" 0° Deflection Models: 355ZFL / 355ZFS - Border Type 1 D plus 1¾" 9/16" D minus ¾" ½" Screwdriver Slot Operator For Optional Damper Optional Opposed Blade Damper DIMENSIONS Note: When Damper Is Full Open, Add ⅜" To Overall Depth. Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost 1¼" H36 ¼" Screwdriver Slot Operator For Optional Damper Optional Opposed Blade Damper H 35° ¼" 1¼" 2½" D minus ½" Nominal Duct Size D" Available sizes (D” x D”) are 6 x 4 inches through 48 x 48 inches in 1” increments Odd and fractional sizes are available at additional cost All dimensions are in inches Note: When Damper Is Full Open, Add ⅜" To Overall Depth. 300 / 350 grilles PERFORMANCE DATA NC-20 Nominal Duct Area ( ft2 ) 0.25 Core Area ( ft2 ) Core Velocity Velocity Pressure Neg. Static Pressure 100 0.001 0.002 200 0.002 0.008 300 0.006 0.018 400 0.010 0.032 500 0.016 0.051 600 0.022 0.073 700 0.031 0.099 800 0.040 0.130 900 0.050 0.164 0.19 8x6 0.33 0.26 10x6 0.42 0.34 8x8 0.44 0.37 12x6 0.5 0.41 14x6 0.58 0.48 16x6 12x8 0.67 0.57 10x10 0.69 0.59 18x6 20x6 12x10 0.75 0.63 0.83 0.72 22x6 24x6 12x12 30x6 18x10 0.92 0.77 1 0.88 1.25 1.11 14x14 36x6 18x12 1.36 1.22 1.5 1.35 22x10 30x8 24x10 42x6 18x14 16x16 1.53 1.37 1.67 1.49 1.75 1.78 1.59 1.62 24x12 18x16 18x18 2 1.82 2.25 2.07 24x14 2.33 2.14 30x12 2.5 2.29 24x16 2.67 2.46 20x20 2.78 2.57 36x12 3 2.75 30x16 24x20 3.33 3.11 22x22 42x12 36x14 3.36 3.14 3.5 3.22 24x22 3.67 3.43 30x18 3.75 3.5 Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC 19 26 34 37 41 48 57 59 63 72 77 88 111 122 135 137 149 159 162 182 207 214 229 246 257 275 311 314 322 343 350 - 38 52 68 74 82 96 114 118 126 144 154 176 222 244 270 274 298 318 324 364 414 428 458 492 514 550 622 628 644 686 700 - 57 78 102 111 123 144 171 177 189 216 231 264 333 366 405 411 447 477 486 546 621 642 687 738 771 825 933 942 966 1029 1050 - 76 104 136 148 164 192 228 236 252 288 308 352 444 488 540 548 596 636 648 728 828 856 916 984 1028 1100 1244 1256 1288 1372 1400 - 95 130 170 185 205 240 285 10 295 10 315 10 360 11 385 11 440 11 555 12 610 12 675 13 685 13 745 14 795 14 810 14 910 14 1035 14 1070 14 1145 15 1230 15 1285 16 1375 16 1555 17 1570 17 1610 17 1715 17 1750 17 114 13 156 15 204 16 222 16 246 17 288 18 342 19 354 19 378 19 432 19 462 19 528 19 666 20 732 20 810 20 822 20 894 21 954 21 972 21 1092 21 1242 21 1284 22 1374 22 1476 22 1542 23 1650 23 1866 24 1884 24 1932 24 2058 24 2100 24 133 19 182 20 238 21 259 22 287 22 336 24 399 25 413 25 441 25 504 25 539 25 616 25 777 26 854 27 945 27 959 27 1043 27 1113 27 1134 27 1274 28 1449 28 1498 28 1603 28 1722 29 1799 29 1925 29 2177 30 2198 30 2254 30 2401 30 2450 30 152 25 208 26 272 28 296 28 328 30 384 30 456 30 472 31 504 32 576 30 616 30 704 30 888 32 976 32 1080 32 1096 32 1192 33 1272 33 1296 33 1456 33 1656 33 1712 33 1832 33 1968 34 2056 34 2200 34 2488 35 2512 35 2576 36 2744 36 2800 36 171 29 234 30 306 32 333 32 369 34 432 34 513 35 531 35 567 35 648 35 693 35 792 35 999 35 1098 35 1215 35 1233 36 1341 37 1431 37 1458 37 1638 38 1863 38 1926 38 2061 38 2214 39 2313 39 2475 39 2799 40 2826 40 2898 40 3087 40 3150 40 • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006 • NC based on room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006 NC-30 H NC-40 PERFORMANCE DATA Nominal Duct Size ( in. ) 6x6 Redefine your comfort zone. ™ | www.titus-hvac.com 350R, 350F AND 350R-SS PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD H37 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PERFORMANCE DATA H H38 350R, 350F AND 350R-SS PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD NC-20 Nominal Duct Size ( in. ) 48x12 24x24 Nominal Duct Area ( ft2 ) Core Area ( ft2 ) 4 3.75 36x18 36x20 30x24 4.5 4.22 5 4.71 42x18 5.25 4.94 28x28 42x20 30x28 48x18 36x24 5.44 5.16 5.83 5.51 6 5.66 30x30 42x24 36x28 6.25 5.94 7 6.66 46x22 7.03 6.68 32x32 7.11 6.78 36x30 48x24 36x32 7.5 7.16 8 7.63 34x34 8.03 7.68 36x34 8.5 8.14 42x30 8.75 8.38 36x36 42x34 48x30 9 8.63 10 9.6 38x38 10.03 9.64 42x36 10.5 10.1 46x34 10.86 10.45 42x38 11.08 10.67 40x40 11.11 10.7 48x36 12 11.57 42x42 12.25 11.82 44x44 13.44 12.99 48x42 14 13.54 46x46 14.69 14.22 48x46 15.33 14.85 48x48 16 15.5 NC-30 NC-40 Core Velocity Velocity Pressure Neg. Static Pressure 100 0.001 0.002 200 0.002 0.008 300 0.006 0.018 400 0.010 0.032 500 0.016 0.051 600 0.022 0.073 700 0.031 0.099 800 0.040 0.130 900 0.050 0.164 Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC 375 422 471 494 516 551 566 594 666 668 678 716 763 768 814 838 863 960 964 1010 1045 1067 1070 1157 1182 1299 1354 1422 1485 1550 - 750 844 942 988 1032 1102 1132 1188 1332 1336 1356 1432 1526 1536 1628 1676 1726 1920 1928 2020 2090 2134 2140 2314 2364 2598 2708 2844 2970 3100 - 1125 1266 1413 1482 1548 1653 1698 1782 1998 2004 2034 2148 2289 2304 2442 2514 2589 2880 2892 3030 3135 3201 3210 3471 3546 3897 4062 4266 4455 4650 - 1500 1688 1884 1976 2064 2204 10 2264 10 2376 10 2664 10 2672 10 2712 10 2864 10 3052 10 3072 10 3256 11 3352 11 3452 11 3840 11 3856 11 4040 11 4180 11 4268 11 4280 11 4628 11 4728 11 5196 12 5416 12 5688 12 5940 12 6200 13 1875 18 2110 18 2355 18 2470 18 2580 18 2755 18 2830 18 2970 18 3330 19 3340 19 3390 19 3580 19 3815 19 3840 19 4070 19 4190 20 4315 20 4800 20 4820 20 5050 20 5225 20 5335 20 5350 20 5785 20 5910 20 6495 21 6770 21 7110 21 7425 22 7750 22 2250 25 2532 25 2826 25 2964 25 3096 25 3306 26 3396 26 3564 26 3996 26 4008 27 4068 27 4296 27 4578 27 4608 27 4884 27 5028 27 5178 27 5760 27 5784 27 6060 27 6270 27 6402 27 6420 27 6942 27 7092 27 7794 28 8124 28 8532 28 8910 28 9300 29 2625 37 2954 31 3297 31 3458 31 3612 32 3857 32 3962 32 4158 32 4662 32 4676 32 4746 32 5012 32 5341 32 5376 32 5698 32 5866 32 6041 33 6720 33 6748 33 7070 33 7315 33 7469 33 7490 33 8099 33 8274 33 9093 34 9478 34 9954 35 10395 35 10850 35 3000 38 3376 38 3768 38 3952 38 4128 38 4408 38 4528 38 4752 38 5328 38 5344 38 5424 38 5728 38 6104 38 6144 38 6512 38 6704 38 6904 38 7680 38 7712 38 8080 38 8360 38 8536 38 8560 38 9256 39 9456 39 10392 39 10832 40 11376 40 11880 40 12400 40 3375 41 3798 41 4239 41 4446 41 4644 41 4959 41 5094 41 5346 41 5994 41 6012 42 6102 42 6444 42 6867 42 6912 42 7326 42 7542 42 7767 43 8640 43 8676 43 9090 43 9405 43 9603 43 9630 43 10413 44 10638 44 11691 44 12186 45 12798 45 13365 45 13950 45 • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006 • NC based on room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006 300 / 350 grilles PERFORMANCE DATA NC-10 NC-20 NC-30 NC-40 Nominal Duct Area ( ft2 ) 0.25 Core Area ( ft2 ) Core Velocity Velocity Pressure Neg. Static Pressure 300 0.006 0.012 400 0.010 0.022 500 0.016 0.034 600 0.022 0.049 700 0.031 0.067 900 0.050 0.111 1100 0.075 0.165 1300 0.105 0.231 1500 0.140 0.307 0.19 8x6 0.33 0.26 10x6 0.42 0.34 8x8 0.44 0.37 12x6 0.5 0.41 14x6 0.58 0.48 16x6 12x8 0.67 0.57 10x10 0.69 0.59 18x6 20x6 12x10 0.75 0.63 0.83 0.72 22x6 24x6 12x12 30x6 18x10 0.92 0.77 1 0.88 1.25 1.11 14x14 36x6 18x12 1.36 1.22 1.5 1.35 22x10 30x8 24x10 42x6 18x14 16x16 1.53 1.37 1.67 1.49 1.75 1.78 1.59 1.62 24x12 18x16 18x18 2 1.82 2.25 2.07 24x14 2.33 2.14 30x12 2.5 2.29 24x16 2.67 2.46 20x20 2.78 2.57 36x12 3 2.75 30x16 24x20 3.33 3.11 22x22 42x12 36x14 3.36 3.14 3.5 3.22 24x22 3.67 3.43 30x18 3.75 3.5 Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC 57 78 102 111 123 144 171 177 189 216 231 264 333 366 405 411 447 477 486 546 621 642 687 738 771 825 933 942 966 1029 1050 - 76 104 136 148 164 192 228 236 252 288 308 352 444 488 540 548 596 636 648 728 828 856 916 984 1028 1100 1244 1256 1288 1372 1400 - 95 130 170 185 205 240 285 295 315 360 385 440 555 11 610 11 675 12 685 12 745 12 795 13 810 13 910 13 1035 14 1070 14 1145 14 1230 15 1285 15 1375 15 1555 16 1570 16 1610 16 1715 16 1750 16 114 156 204 11 222 12 246 12 288 13 342 13 354 14 378 14 432 14 462 15 528 15 666 16 732 17 810 17 822 17 894 18 954 18 972 18 1092 18 1242 19 1284 19 1374 19 1476 20 1542 20 1650 20 1866 21 1884 21 1932 21 2058 21 2100 21 133 13 182 14 238 16 259 16 287 16 336 17 399 18 413 18 441 18 504 19 539 19 616 20 777 21 854 21 945 22 959 22 1043 22 1113 22 1134 22 1274 23 1449 23 1498 24 1603 24 1722 24 1799 24 1925 25 2177 25 2198 25 2254 25 2401 26 2450 26 171 20 234 22 306 23 333 23 369 24 432 24 513 25 531 25 567 25 648 26 693 26 792 27 999 28 1098 28 1215 29 1233 29 1341 29 1431 29 1458 30 1638 30 1863 31 1926 31 2061 31 2214 31 2313 32 2475 32 2799 32 2826 32 2898 33 3087 33 3150 33 209 26 286 27 374 28 407 29 451 29 528 30 627 31 649 31 693 31 792 32 847 32 968 33 1221 34 1342 34 1485 35 1507 35 1639 35 1749 35 1782 35 2002 36 2277 36 2354 37 2519 37 2706 37 2827 37 3025 38 3421 38 3454 38 3542 38 3773 39 3850 39 247 31 338 32 442 33 481 34 533 34 624 35 741 36 767 36 819 36 936 37 1001 37 1144 37 1443 38 1586 39 1755 39 1781 39 1937 40 2067 40 2106 40 2366 41 2691 41 2782 41 2977 42 3198 42 3341 42 3575 42 4043 43 4082 43 4186 43 4459 43 4550 43 285 35 390 36 510 37 555 38 615 38 720 39 855 40 885 40 945 40 1080 41 1155 41 1320 42 1665 43 1830 43 2025 43 2055 43 2235 44 2385 44 2430 44 2730 45 3105 45 3210 45 3435 46 3690 46 3855 46 4125 47 4665 47 4710 47 4830 47 5145 47 5250 48 • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006 • NC based on room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006 H PERFORMANCE DATA Nominal Duct Size ( in. ) 6x6 Redefine your comfort zone. ™ | www.titus-hvac.com 350ZR AND 350ZF PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD H39 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PERFORMANCE DATA H 350ZR AND 350ZF PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD NC-10 Nominal Duct Size ( in. ) 48x12 24x24 Nominal Duct Area ( ft2 ) Core Area ( ft2 ) 4 3.75 36x18 36x20 30x24 4.5 4.22 5 4.71 42x18 5.25 4.94 28x28 42x20 30x28 48x18 36x24 5.44 5.16 5.83 5.51 6 5.66 30x30 42x24 36x28 6.25 5.94 7 6.66 46x22 7.03 6.68 32x32 7.11 6.78 36x30 48x24 36x32 7.5 7.16 8 7.63 34x34 8.03 7.68 36x34 8.5 8.14 42x30 8.75 8.38 36x36 42x34 48x30 9 8.63 10 9.6 38x38 10.03 9.64 42x36 10.5 10.1 46x34 10.86 10.45 42x38 11.08 10.67 40x40 11.11 10.7 48x36 12 11.57 42x42 12.25 11.82 44x44 13.44 12.99 48x42 14 13.54 46x46 14.69 14.22 48x46 15.33 14.85 48x48 16 15.5 NC-20 NC-30 NC-40 Core Velocity Velocity Pressure Neg. Static Pressure 300 0.006 0.012 400 0.010 0.022 500 0.016 0.034 600 0.022 0.049 700 0.031 0.067 900 0.050 0.111 1100 0.075 0.165 1300 0.105 0.231 1500 0.140 0.307 Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC 1125 1266 1413 1482 1548 1653 1698 1782 1998 2004 2034 2148 2289 2304 2442 2514 2589 2880 2892 3030 3135 3201 3210 3471 3546 3897 4062 4266 4455 4650 - 1500 1688 1884 11 1976 11 2064 11 2204 12 2264 12 2376 12 2664 12 2672 12 2712 13 2864 13 3052 13 3072 13 3256 13 3352 13 3452 14 3840 14 3856 14 4040 14 4180 14 4268 14 4280 15 4628 15 4728 15 5196 15 5416 16 5688 16 5940 16 6200 16 1875 16 2110 17 2355 17 2470 18 2580 18 2755 18 2830 18 2970 18 3330 19 3340 19 3390 19 3580 19 3815 19 3840 19 4070 20 4190 20 4315 20 4800 20 4820 20 5050 21 5225 21 5335 21 5350 21 5785 21 5910 21 6495 22 6770 22 7110 22 7425 22 7750 23 2250 22 2532 22 2826 23 2964 23 3096 23 3306 23 3396 23 3564 24 3996 24 4008 24 4068 24 4296 24 4578 25 4608 25 4884 25 5028 25 5178 25 5760 26 5784 26 6060 26 6270 26 6402 26 6420 26 6942 26 7092 27 7794 27 8124 27 8532 27 8910 28 9300 28 2625 26 2954 27 3297 27 3458 27 3612 27 3857 28 3962 28 4158 28 4662 28 4676 29 4746 29 5012 29 5341 29 5376 29 5698 29 5866 29 6041 30 6720 30 6748 30 7070 30 7315 30 7469 31 7490 31 8099 31 8274 31 9093 31 9478 32 9954 32 10395 32 10850 32 3375 33 3798 34 4239 34 4446 34 4644 35 4959 35 5094 35 5346 35 5994 36 6012 36 6102 36 6444 36 6867 36 6912 36 7326 37 7542 37 7767 37 8640 37 8676 37 9090 38 9405 38 9603 38 9630 38 10413 38 10638 38 11691 39 12186 39 12798 39 13365 39 13950 39 4125 39 4642 39 5181 40 5434 40 5676 40 6061 41 6226 41 6534 41 7326 41 7348 41 7458 42 7876 42 8393 42 8448 42 8954 42 9218 42 9493 43 10560 43 10604 43 11110 43 11495 43 11737 44 11770 44 12727 44 13002 44 14289 44 14894 45 15642 45 16335 45 17050 45 4875 44 5486 44 6123 45 6422 45 6708 45 7163 45 7358 46 7722 46 8658 46 8684 46 8814 46 9308 47 9919 47 9984 47 10582 47 10894 47 11219 47 12480 48 12532 48 13130 48 13585 48 13871 48 13910 48 15041 49 15366 49 16887 49 17602 49 18486 50 19305 50 20150 50 5625 48 6330 48 7065 49 7410 49 7740 49 8265 50 8490 50 8910 50 9990 50 10020 50 10170 50 10740 51 11445 51 11520 51 12210 51 12570 51 12945 51 14400 52 14460 52 15150 52 15675 52 16005 52 16050 52 17355 53 17730 53 19485 53 20310 53 21330 54 22275 54 23250 54 NC-50 H40 • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006 • NC based on room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006 300 / 350 grilles PERFORMANCE DATA NC-20 NC-30 Nominal Duct Area ( ft2 ) 0.25 Core Area ( ft2 ) Core Velocity Velocity Pressure Neg. Static Pressure 100 0.001 0.003 200 0.002 0.011 300 0.006 0.026 400 0.010 0.045 500 0.016 0.071 600 0.022 0.102 700 0.031 0.139 800 0.040 0.182 900 0.050 0.230 0.19 8x6 0.33 0.26 10x6 0.42 0.34 8x8 0.44 0.37 12x6 0.5 0.41 14x6 0.58 0.48 16x6 12x8 0.67 0.57 10x10 0.69 0.59 18x6 20x6 12x10 0.75 0.63 0.83 0.72 0.92 0.77 1 0.88 1.25 1.11 14x14 36x6 18x12 1.36 1.22 1.5 1.35 22x10 30x8 24x10 42x6 18x14 16x16 1.53 1.37 1.67 1.49 1.75 1.78 1.59 1.62 Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC 19 26 34 37 41 48 57 59 63 72 77 88 111 122 135 137 149 159 162 182 207 214 229 246 257 275 311 314 322 343 350 - 38 52 68 74 82 96 114 118 126 144 154 176 222 244 270 274 298 318 324 364 414 428 458 492 514 550 622 628 644 686 700 - 57 78 102 111 123 144 171 177 189 216 231 264 333 366 405 411 447 477 486 546 621 642 687 738 771 825 933 942 966 1029 1050 - 76 104 136 148 164 192 228 236 252 288 308 352 444 488 540 548 596 636 648 728 828 856 916 984 10 1028 10 1100 10 1244 10 1256 10 1288 10 1372 10 1400 10 95 10 130 11 170 12 185 12 205 12 240 12 285 13 295 13 315 14 360 14 385 14 440 15 555 15 610 16 675 16 685 16 745 16 795 17 810 17 910 17 1035 18 1070 18 1145 18 1230 18 1285 18 1375 19 1555 19 1570 19 1610 19 1715 19 1750 19 114 18 156 19 204 20 222 20 246 20 288 20 342 21 354 21 378 22 432 22 462 22 528 22 666 22 732 23 810 24 822 24 894 24 954 24 972 24 1092 24 1242 25 1284 25 1374 25 1476 25 1542 25 1650 26 1866 26 1884 26 1932 26 2058 26 2100 26 133 25 182 25 238 26 259 26 287 26 336 26 399 27 413 27 441 28 504 28 539 28 616 28 777 28 854 29 945 29 959 30 1043 30 1113 30 1134 30 1274 30 1449 31 1498 31 1603 31 1722 32 1799 32 1925 32 2177 32 2198 33 2254 33 2401 33 2450 33 152 29 208 30 272 31 296 31 328 32 384 32 456 32 472 32 504 33 576 33 616 34 704 34 888 34 976 34 1080 34 1096 35 1192 35 1272 35 1296 35 1456 35 1656 35 1712 35 1832 35 1968 36 2056 36 2200 37 2488 37 2512 38 2576 38 2744 38 2800 38 171 33 234 35 306 36 333 36 369 36 432 37 513 38 531 38 567 38 648 38 693 38 792 39 999 39 1098 39 1215 39 1233 39 1341 39 1431 39 1458 39 1638 39 1863 40 1926 40 2061 40 2214 39 2313 40 2475 42 2799 42 2826 42 2898 43 3087 43 3150 43 24x12 18x16 18x18 2 1.82 2.25 2.07 24x14 2.33 2.14 30x12 2.5 2.29 24x16 2.67 2.46 20x20 2.78 2.57 36x12 3 2.75 30x16 24x20 3.33 3.11 22x22 42x12 36x14 3.36 3.14 3.5 3.22 24x22 3.67 3.43 30x18 3.75 3.5 • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006 • NC based on room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006 H NC-40 PERFORMANCE DATA Nominal Duct Size ( in. ) 6x6 22x6 24x6 12x12 30x6 18x10 Redefine your comfort zone. ™ | www.titus-hvac.com 355R AND 355F PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD H41 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PERFORMANCE DATA H H42 355R AND 355F PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD NC-20 Nominal Duct Size ( in. ) 48x12 24x24 Nominal Duct Area ( ft2 ) Core Area ( ft2 ) 4 3.75 36x18 36x20 30x24 4.5 4.22 5 4.71 42x18 5.25 4.94 28x28 42x20 30x28 48x18 36x24 5.44 5.16 5.83 5.51 6 5.66 30x30 42x24 36x28 6.25 5.94 7 6.66 46x22 7.03 6.68 32x32 7.11 6.78 36x30 48x24 36x32 7.5 7.16 8 7.63 34x34 8.03 7.68 36x34 8.5 8.14 42x30 8.75 8.38 36x36 42x34 48x30 9 8.63 10 9.6 38x38 10.03 9.64 42x36 10.5 10.1 46x34 10.86 10.45 42x38 11.08 10.67 40x40 11.11 10.7 48x36 12 11.57 42x42 12.25 11.82 44x44 13.44 12.99 48x42 14 13.54 46x46 14.69 14.22 48x46 15.33 14.85 48x48 16 15.5 NC-30 NC-40 Core Velocity Velocity Pressure Neg. Static Pressure 100 0.001 0.003 200 0.002 0.011 300 0.006 0.026 400 0.010 0.045 500 0.016 0.071 600 0.022 0.102 700 0.031 0.139 800 0.040 0.182 900 0.050 0.230 Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC 375 422 471 494 516 551 566 594 666 668 678 716 763 768 814 838 863 960 964 1010 1045 1067 1070 1157 1182 1299 1354 1422 1485 1550 - 750 844 942 988 1032 1102 1132 1188 1332 1336 1356 1432 1526 1536 1628 1676 1726 1920 1928 2020 2090 2134 2140 2314 2364 2598 2708 2844 2970 3100 - 1125 1266 1413 1482 1548 1653 1698 1782 1998 2004 2034 2148 2289 2304 2442 2514 2589 2880 2892 3030 3135 3201 3210 3471 3546 3897 4062 4266 4455 4650 - 1500 10 1688 10 1884 11 1976 12 2064 12 2204 12 2264 12 2376 12 2664 13 2672 13 2712 13 2864 14 3052 14 3072 14 3256 14 3352 14 3452 14 3840 14 3856 14 4040 15 4180 15 4268 15 4280 15 4628 15 4728 15 5196 15 5416 16 5688 16 5940 16 6200 16 1875 19 2110 19 2355 19 2470 20 2580 21 2755 21 2830 21 2970 21 3330 22 3340 22 3390 22 3580 23 3815 23 3840 23 4070 23 4190 23 4315 23 4800 23 4820 23 5050 23 5225 23 5335 23 5350 23 5785 23 5910 24 6495 24 6770 24 7110 25 7425 25 7750 25 2250 26 2532 26 2826 27 2964 28 3096 28 3306 28 3396 28 3564 28 3996 29 4008 29 4068 29 4296 30 4578 30 4608 30 4884 30 5028 30 5178 30 5760 30 5784 30 6060 31 6270 31 6402 31 6420 31 6942 31 7092 31 7794 32 8124 32 8532 32 8910 32 9300 32 2625 33 2954 33 3297 33 3458 34 3612 34 3857 34 3962 35 4158 35 4662 35 4676 35 4746 35 5012 36 5341 36 5376 36 5698 36 5866 36 6041 36 6720 36 6748 36 7070 37 7315 37 7469 37 7490 37 8099 37 8274 37 9093 38 9478 38 9954 39 10395 39 10850 39 3000 39 3376 39 3768 38 3952 39 4128 40 4408 40 4528 40 4752 40 5328 40 5344 40 5424 40 5728 41 6104 41 6144 41 6512 41 6704 41 6904 41 7680 41 7712 41 8080 42 8360 42 8536 42 8560 42 9256 42 9456 42 10392 43 10832 43 11376 44 11880 44 12400 44 3375 43 3798 43 4239 43 4446 44 4644 44 4959 44 5094 44 5346 44 5994 45 6012 45 6102 45 6444 46 6867 46 6912 46 7326 46 7542 46 7767 46 8640 46 8676 46 9090 47 9405 47 9603 47 9630 47 10413 47 10638 47 11691 48 12186 48 12798 48 13365 48 13950 48 • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006 • NC based on room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006 300 / 350 grilles PERFORMANCE DATA NC-10 NC-20 NC-30 Nominal Duct Area ( ft2 ) 0.25 Core Area ( ft2 ) Core Velocity Velocity Pressure Neg. Static Pressure 300 0.006 0.013 400 0.010 0.022 500 0.016 0.035 600 0.022 0.050 700 0.031 0.068 800 0.040 0.089 900 0.050 0.113 1000 0.062 0.140 1100 0.075 0.169 0.19 8x6 0.33 0.26 10x6 0.42 0.34 8x8 0.44 0.37 12x6 0.5 0.41 14x6 0.58 0.48 16x6 12x8 0.67 0.57 10x10 0.69 0.59 18x6 20x6 12x10 0.75 0.63 0.83 0.72 22x6 24x6 12x12 30x6 18x10 0.92 0.77 1 0.88 1.25 1.11 14x14 36x6 18x12 1.36 1.22 1.5 1.35 22x10 30x8 24x10 42x6 18x14 16x16 1.53 1.37 1.67 1.49 1.75 1.78 1.59 1.62 24x12 18x16 18x18 2 1.82 2.25 2.07 24x14 2.33 2.14 30x12 2.5 2.29 24x16 2.67 2.46 20x20 2.78 2.57 36x12 3 2.75 30x16 24x20 3.33 3.11 22x22 42x12 36x14 3.36 3.14 3.5 3.22 24x22 3.67 3.43 30x18 3.75 3.5 Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC 57 78 102 111 123 144 171 177 189 216 231 264 333 366 405 411 447 477 486 546 621 642 687 738 771 825 933 942 966 1029 1050 - 76 104 136 148 164 192 228 236 252 288 308 352 444 488 540 548 596 636 11 648 11 728 11 828 12 856 12 916 12 984 13 1028 13 1100 13 1244 14 1256 14 1288 14 1372 14 1400 14 95 130 170 185 205 11 240 11 285 12 295 12 315 12 360 13 385 13 440 14 555 15 610 15 675 16 685 16 745 16 795 17 810 17 910 17 1035 18 1070 18 1145 18 1230 18 1285 19 1375 19 1555 19 1570 19 1610 20 1715 20 1750 20 114 12 156 13 204 15 222 15 246 15 288 16 342 17 354 17 378 17 432 18 462 18 528 19 666 20 732 20 810 21 822 21 894 21 954 21 972 21 1092 22 1242 22 1284 23 1374 23 1476 23 1542 23 1650 24 1866 24 1884 24 1932 24 2058 25 2100 25 133 16 182 17 238 19 259 19 287 19 336 20 399 21 413 21 441 21 504 22 539 22 616 23 777 24 854 24 945 25 959 25 1043 25 1113 25 1134 25 1274 26 1449 26 1498 27 1603 27 1722 27 1799 27 1925 28 2177 28 2198 28 2254 28 2401 29 2450 29 152 20 208 21 272 22 296 23 328 23 384 24 456 24 472 25 504 25 576 25 616 26 704 26 888 27 976 28 1080 28 1096 28 1192 29 1272 29 1296 29 1456 29 1656 30 1712 30 1832 30 1968 31 2056 31 2200 31 2488 32 2512 32 2576 32 2744 32 2800 32 171 23 234 24 306 24 333 26 369 26 432 27 513 27 531 28 567 28 648 29 693 29 792 29 999 30 1098 31 1215 31 1233 31 1341 32 1431 32 1458 32 1638 33 1863 33 1926 33 2061 34 2214 34 2313 34 2475 34 2799 35 2826 35 2898 35 3087 35 3150 35 190 25 260 27 340 28 370 28 410 29 480 30 570 30 590 30 630 31 720 31 770 32 880 32 1110 33 1220 34 1350 34 1370 34 1490 34 1590 35 1620 35 1820 35 2070 36 2140 36 2290 36 2460 37 2570 37 2750 37 3110 38 3140 38 3220 38 3430 38 3500 38 209 28 286 29 374 31 407 31 451 31 528 32 627 33 649 33 693 33 792 34 847 34 968 35 1221 36 1342 36 1485 37 1507 37 1639 37 1749 37 1782 37 2002 38 2277 38 2354 39 2519 39 2706 39 2827 39 3025 40 3421 40 3454 40 3542 40 3773 41 3850 41 H PERFORMANCE DATA Nominal Duct Size ( in. ) 6x6 Redefine your comfort zone. ™ | www.titus-hvac.com 355ZR AND 355ZF PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD NC-40 • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006. • NC based on room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006. H43 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com PERFORMANCE DATA PERFORMANCE DATA H H44 355ZR AND 355ZF PERFORMANCE BASED ON NOMINAL SIZES SHOWN IN BOLD NC-10 Nominal Duct Size ( in. ) Nominal Duct Area ( ft2 ) Core Area ( ft2 ) 42x18 5.25 4.94 28x28 42x20 30x28 48x18 36x24 5.44 5.16 5.83 5.51 6 5.66 30x30 42x24 36x28 6.25 5.94 7 6.66 46x22 7.03 6.68 32x32 7.11 6.78 36x30 48x24 36x32 7.5 7.16 8 7.63 34x34 8.03 7.68 36x34 8.5 8.14 42x30 8.75 8.38 36x36 42x34 48x30 9 8.63 10 9.6 38x38 10.03 9.64 42x36 10.5 10.1 46x34 10.86 10.45 42x38 11.08 10.67 40x40 11.11 10.7 48x36 12 11.57 42x42 12.25 11.82 44x44 13.44 12.99 48x42 14 13.54 46x46 14.69 14.22 48x46 15.33 14.85 48x48 16 15.5 NC-20 NC-30 NC-40 Core Velocity Velocity Pressure Neg. Static Pressure 300 0.006 0.013 400 0.010 0.022 500 0.016 0.035 600 0.022 0.050 700 0.031 0.068 800 0.040 0.089 900 0.050 0.113 1000 0.062 0.140 1100 0.075 0.169 Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC Airflow, cfm NC 1482 1548 1653 1698 1782 1998 2004 2034 2148 2289 2304 2442 2514 2589 2880 11 2892 11 3030 11 3135 11 3201 11 3210 11 3471 12 3546 12 3897 12 4062 12 4266 13 4455 13 4650 13 1976 16 2064 16 2204 16 2264 16 2376 16 2664 17 2672 17 2712 17 2864 17 3052 17 3072 18 3256 18 3352 18 3452 18 3840 18 3856 18 4040 19 4180 19 4268 19 4280 19 4628 19 4728 19 5196 20 5416 20 5688 20 5940 20 6200 21 2470 21 2580 22 2755 22 2830 22 2970 22 3330 23 3340 23 3390 23 3580 23 3815 23 3840 23 4070 24 4190 24 4315 24 4800 24 4820 24 5050 25 5225 25 5335 25 5350 25 5785 25 5910 25 6495 26 6770 26 7110 26 7425 26 7750 26 2964 26 3096 26 3306 27 3396 27 3564 27 3996 28 4008 28 4068 28 4296 28 4578 28 4608 28 4884 28 5028 29 5178 29 5760 29 5784 29 6060 29 6270 29 6402 30 6420 30 6942 30 7092 30 7794 30 8124 31 8532 31 8910 31 9300 31 3458 30 3612 30 3857 31 3962 31 4158 31 4662 32 4676 32 4746 32 5012 32 5341 32 5376 32 5698 32 5866 33 6041 33 6720 33 6748 33 7070 33 7315 34 7469 34 7490 34 8099 34 8274 34 9093 34 9478 35 9954 35 10395 35 10850 35 3952 34 4128 34 4408 34 4528 34 4752 35 5328 35 5344 35 5424 35 5728 35 6104 36 6144 36 6512 36 6704 36 6904 36 7680 37 7712 37 8080 37 8360 37 8536 37 8560 37 9256 37 9456 38 10392 38 10832 38 11376 38 11880 39 12400 39 4446 37 4644 37 4959 37 5094 37 5346 38 5994 38 6012 38 6102 38 6444 38 6867 39 6912 39 7326 39 7542 39 7767 39 8640 40 8676 40 9090 40 9405 40 9603 40 9630 40 10413 41 10638 41 11691 41 12186 41 12798 41 13365 42 13950 42 4940 40 5160 40 5510 40 5660 40 5940 40 6660 41 6680 41 6780 41 7160 41 7630 42 7680 42 8140 42 8380 42 8630 42 9600 43 9640 43 10100 43 10450 43 10670 43 10700 43 11570 43 11820 43 12990 44 13540 44 14220 44 14850 44 15500 45 5434 42 5676 42 6061 43 6226 43 6534 43 7326 43 7348 43 7458 44 7876 44 8393 44 8448 44 8954 44 9218 44 9493 45 10560 45 10604 45 11110 45 11495 45 11737 45 11770 45 12727 46 13002 46 14289 46 14894 47 15642 47 16335 47 17050 47 • Static pressures are negative, in inches of water, measured per ANSI/ASHRAE Standard 70-2006 • NC based on room absorption of 10 dB, re 10-12 watts, measured per ANSI/ASHRAE Standard 70-2006 300 / 350 grilles Filter Return Grilles Steel, Aluminum and Stainless Steel Available Steel Models: ¾” Spacing 350RLF1 / 1” Filter 350RSF1 / 1” Filter 350RLF2 / 2” Filter 350RSF2 / 2” Filter 350RLF1 / 350RLF2 - Border Type 1(Surface Mount) & Border Type 3 (Lay-in T-Bar) FASTENER 7/16” ½” Spacing 355RLF1 / 1” Filter 355RSF1 / 1” Filter 355RLF2 / 2” Filter 355RSF2 / 2” Filter ½” Spacing 355FLF1 / 1” Filter 355FSF1 / 1” Filter 355FLF2 / 2” Filter 355FSF2 / 2” Filter Available 304 Stainless Steel Models: ¾” Spacing 350RLF1-SS / 1” Filter 350RSF1-SS / 1” Filter 350RLF2-SS / 2” Filter 350RSF2-SS / 2” Filter Please refer to page H50 for Hinge Locations 1 1/4” NOMINAL DUCT SIZE (D) D PLUS 1/4" Available sizes (D” x D”) are 10 x 8 inches through 48 x 36 inches in 1” increments. Odd sizes are available at additional cost. D PLUS 3 3/4" H 350 / 355 FILTER RETURN GRILLES Products Include: • 35° Fixed Deflection - Steel and Aluminum • 45° Fixed Deflection - Stainless Steel • ¼-Turn Fastener • 1- or 2” Filter Frame. • Available Border Types: #1 - Surface Mount #3 - Lay-In • Standard Finish - #26 White (Steel and Aluminum Models) • Standard FInish - #04 Mill (Stainless Steel Models) 3/4” 2" FOR 1" FILTER 3 1/8" FOR 2" FILTER D PLUS 3 3/4" Available Aluminum Models: ¾” Spacing 350FLF1 / 1” Filter 350FSF1 / 1” Filter 350FLF2 / 2” Filter 350FSF2 / 2” Filter HINGE D PLUS 3 3/4" Redefine your comfort zone. ™ | www.titus-hvac.com 350 / 355 (RLF-RSF / FLF-FSF / -SS) H45 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com OPTIONS & ACCESSORIES H Model Number 301 300 301 300 301 300 301HD 300HD Type Grille Stl.-Supply Stl.-Supply Al.-Supply Al.-Supply SS-Supply SS-Supply Stl.-Supply Stl.-Supply Type Deflection Single Double Single Double Single Double Single Double Deflection Degrees Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Blade Spacing Model Number 350 350 350 355 355 350RF 350RF 350FF 350FF 350RF 350 355 350RF 350RF 350 355 350FF 350FF 350 355 350 355 350 355 350 355 AG-15 AG-15-AA AG-15-SS Type Grille Stl.-Return Al.-Return SS-Return Stl.-Return Al.-Return Stl. Filter Return Stl. Filter Return Al-Filter Return Al-Filter Return SS Filter Return Stl.-Return Stl.-Return Stl. Filter Return Stl. Filter Return Al.-Return Al.-Return Al-Filter Return Al-Filter Return Stl.-Return Stl.-Return Al.-Return Al.-Return Stl.-Return Stl.-Return Al.-Return Al.-Return Stl.-Damper Al.-Damper SS.-Damper Type Deflection Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single Single ------- Deflection Degrees 0/35 0/35 0/45 0/35 0/35 35 35 35 35 45 0/35 0/35 35 35 0/35 0/35 35 35 0/35 0/35 0/35 0/35 0/35 0/35 0/35 0/35 ------- Blade Spacing ¾” ¾” ¾” ¾” ¾” ¾” ½” ½” ¾” ¾” ¾” ½” ½” ¾” ½” ¾” ½” ¾” ¾” ½” ¾” ½” ¾” ½” ¾” ½” ¾” ½” ¾” ½” ¾” ½” ¾” ½” ------- Border Type 1 1 1 1 1 1 1 1 OS FR #01 #04 #20 #21 #26 #84 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y N N Y N Y Y N Y N N Y N Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y C Y Y Y Y N N N N DS Y Y Y Y N N N N IS Y Y Y Y N N N N FG Y Y Y Y Y Y Y Y PF Y Y Y Y Y Y Y Y PFAP N N N N N N N N Border Type 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 2 2 2 2 4 4 4 4 ------- OS FR #01 #04 #20 #21 #26 #84 C Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y N Y N N Y N N Y Y Y Y Y Y Y Y N Y Y Y Y Y Y Y Y N N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N N Y N N Y N N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N N Y Y Y Y Y Y Y N Y Y N Y N N Y Y --Y Y N Y N N Y Y --Y Y N Y N N N N --- DS Y Y N Y Y N N N N N Y Y N N Y Y N N Y Y Y Y Y Y Y Y ------- IS Y Y N Y Y N N N N N Y Y N N Y Y N N Y Y Y Y Y Y Y Y ------- FG Y Y Y Y Y Y Y Y Y Y N N N N N N N N N N N N N N N N ------- PF Y Y Y Y Y Y Y Y Y Y N N N N N N N N N N N N N N N N ------- PFAP EQT N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y N Y ------------- EQT Y Y Y Y Y Y Y Y OPTIONS & ACCESSORIES Caution: All options are not available in all combinations. Check with your Titus representative for details. Titus reserves the right to discontinue or add options at any time without notice. H46 SERIES FINISHES, OPTIONS AND ACCESSORIES Finishes: #01 #04 #20 #21 #25 #26 #84 Aluminum Colored Paint* Mill Finish Envirotherm Color To Match Sample* Envirothane Color To Match Sample* Off White* White (standard on most models) Black* Note: An asterisk (*) indicates additional cost Concealed mounting not available with damper Options & Accessories: OS Oversize FR Fractional Size C Concealed Fasteners DS Debris Screen ¼” Square Mesh Galvanized Steel Screen IS Insect Screen 1/16” Square Mesh Galvanized Steel Screen FG Foam Gasket On Back Side of Border PF Steel Plaster Frame PFA Aluminum Plaster Frame PF-SS Stainless Steel Plaster Frame EQT Earthquake Tab For Safety Wiring to Support Structure 300 / 350 grilles OPTIONS & ACCESSORIES Snap-In BORDER TYPE 2 SNAP-IN (PANEL MOUNTED) Available Module Size 24 x 24 inches BORDER TYPE 3 LAY-IN (PANEL MOUNTED) Redefine your comfort zone. ™ | www.titus-hvac.com BORDER TYPES 13/16" Ceiling Module Size minus 1/16" Note: Maximum grille area is module size minus 4 inches Lay-In (Panel Mounted) Available Module Sizes 12 x 12 inches 24 x 12 inches 36 x 12 inches 48 x 12 inches 24 x 24 inches 36 x 24 inches 48 x 24 inches 20 x 20 inches 30 x 30 inches Ceiling Module Size minus ¼" BORDER TYPE 4 SPLINE (PANEL MOUNTED) Note: Maximum grille area is module size minus 4 inches Available Module Sizes 24 x 24 inches Spline (Panel Mounted) BORDER TYPE NT NARROW TEE (PANEL MOUNTED) Available Module Sizes 24 x 12 inches 24 x 24 inches Note: Filter grilles not available in all module sizes ⅜" Ceiling Module Size minus ¾" Note: Maximum grille area is module size minus 4 inches NARROW TEE Narrow Tee (Panel Mounted) ACCESSORIES 16 " 5 TYPE A FASTENING - SURFACE MOUNT • Standard For All Border Type 1 Surface Mount Grilles • Note: For screw hole locations see the chart, “Screw Hole Location Chart” 16 " Ceiling Module Minus 3/4" Type A - External Screw • Available on Most Models with Border Type 1 Type C - Concealed Screw Existing Duct 1¼" x ¾" Angle Clip (by others) #8 Screw (by others) OPTIONS & ACCESSORIES 3 TYPE C FASTENING CONCEALED MOUNTING H ⅜" Ceiling or Wall 1¼" x ¾" Angle Clip Attached to Grille (by Titus) Flange or Grille H47 300 / 350 grilles 300/350 SERIES FOR DUCTS OR OPENINGS LARGER THAN 48 INCHES Joining With Aluminum Mullions or Tabs Notes: • Detail A-A is used for vertical joints. The frames of both vertical sides of the joint are sheared and then butted together. Alignment tabs serve to keep the face surfaces parallel. • Detail B-BAis used for horizontal B joining. Horizontal frames are installed C full A A A A A width with an aluminum mullion in betweenA each frame. • This page does not apply to filter grilles. • This page is for Border Type 1 grilles only. 8"-48" Wide 49"-96" Wide D E 97"-144" Wide and 49"-96" High 49"-96" Wide and 49"-96" High G 6-48" Wide and 49"-96" High A A A A OVERSIZE GRILLE CONSTRUCTION .750 H48 A A A A B F A A H 97"-144" Wide B Redefine your comfort zone. ™ | www.titus-hvac.com Oversize Grille Construction 2.750 Frame .375 234" Frame 5 Alignment Tab 6-48" Wide and 97"-144" High Frame Frame DETAIL A-A 1 4" BB Mullion DETAIL B-B DETAIL B-B 16 " 300 / 350 grilles Screw Hole Location Chart A Redefine your comfort zone. ™ | www.titus-hvac.com For use with 300/350 Grilles up to 48” x 48” (not for use with filter grilles) A HOW TO USE THESE CHARTS 1. Determine desired grille size 2. Find the grille size in Grille Size Chart 3. Use the Grille Size Chart to select the proper diagram number. The number corresponds to the diagrams in the Screw Hole Layout Diagrams 1-14. Grille Size Chart A A C B STEEL FRAME Frame Width A B C ALUMINUM FRAME ½ ¾ 1 11⁄8 .25 .34 .44 .5 .44 - 1.25 and Greater .63 H Screw Layout Diagrams 1 - 14 Note 2: All holes are located 5/8” from outside edge. Location of hole according to number required. (One Hole) Located midway between ends. (Two Holes) Locate each hole 3 inches from each end. (Three Holes) Locate one hole 3 inches from each end and center the third hole. All dimensions are in inches SCREW HOLE LOCATION CHART Note 1: This chart provides general information concerning location of screw holes. Screw hole location is subject to change without notice. Titus does not recommend pre-drilling mounting surfaces for screws. Use the grille as a template. This chart applies to border type 1 only. H49 300 / 350 grilles Redefine your comfort zone. ™ | www.titus-hvac.com OPTIONS & ACCESSORIES HINGE LOCATIONS H LONG BLADE (L) SHORT BLADE (S) TOP HINGE (T) BOTTOM HINGE (B) (L) LEFT HINGE (L) RIGHT HINGE (R) RIGHT HINGE (R) TOP HINGE (T) BOTTOM HINGE (B) 1/4 TURN FASTENER OPTIONS & ACCESSORIES KNURLED KNOB H50 LEFT HINGE ARROWS SHOW BLADE DEFLECTION 300 / 350 grilles Notes Redefine your comfort zone. ™ | www.titus-hvac.com H NOTES H51 300 / 350 grilles Icons Diffuser module sizes are hard metric & inlets are soft. Metric linear and grille products are converted to the nearest ¼” for ordering. Contact us for more information. metric sizes especially suited to work in areas where high humidity may become a factor humid areas for use in MRI environments & will not significantly affect the diagnostic information MRI compatible for use in corrosive environment applications prevents corrosion