CATALOGUE 2019
Special Communication
Antennas and Solutions for Blue Light and Armed Forces
1919–2019
Passion to connect.
SPECIAL
COMMUNICATION
SPECIAL
COMMUNICATION
Special Communication
Who we are
and what we stand for
We Enable Secure Communication. For law enforce-
Kathrein makes communication for these services
ment and emergency services, a trouble-free, reliable
future-proof. Our unique know-how enables us to develop
and, above all, tap-proof communication is indispensable.
antenna solutions that combine TETRA with the mobile
Police, fire brigades, technical relief agencies and other
network. As a result, Kathrein provides state-of-the-art
organisations rely on perfect communication and the
communication technology with high performance and
secure exchange of information during operations.
reliability for safety-relevant areas.
An important requirement is that the communication is
Kathrein solutions have always been convincing due to
encrypted and works over special frequencies. The uni-
their excellent quality. Because of their robustness and
versal platform is the TETRA digital radio system, which
longevity, they are ideally suited for use in particularly
structurally resembles a mobile network. This network
demanding situations. In addition, the special antennas
infrastructure in the low-band range can be shared by
can also be combined with other Kathrein mobile com-
all law enforcement and emergency services.
munication solutions, for example from the field of building digitalisation. This increases their effective range
even more.
Find out more about us at www.kathrein.com
2300–2600 MHz
Directional Antennas
Omni Antennas
Indoor Antennas
2300–2600 MHz
Accessories
Splitters and Tappers
Dual-Band Combiners
Low Noise Amplifier GPS
Mechanical Accessories
Kathrein’s Remote Electrical Tilt System (RET)
Accessories
370–520 MHz
700–850 MHz
Directional Antennas
Omni Antennas
Indoor Antennas
700–850 MHz
370–520 MHz
Directional Antennas
Omni Antennas
Indoor Antennas
Special Purpose Antennas
4
Summary of Antenna Types,
Antenna Line Products and Accessories
The articles are listed by type number in numerical order. New or changed product.
Type No.
Page
848...
Type No.
Page
911214..
Type No.
Page
911219..
Type No.
Page
97131...
848114
21
91121402
19
91121954
68
848657
25
91121416V02
37
91121957
71
91121440
27
91121959
20
91121441
29
91121975
62 + 63
98121116
30
91121976
64 + 65
98121119
30
91121977
66 + 67
91121993
72
849...
849203
42
911215..
852...
91121514
13
91121542
70
852626
12
852627
14
91131...
852628
15
91131237
69
852629
16
91131733
60 + 61
853...
911217..
91121732V02
49
91121743
27
91131822
46
97131271
80
98121...
K74...
K7431348
79
K7431358
79
K81...
K813132
33
K8134321
32
K8134322
32
853203V02
36
91121744
29
92210...
853266
25
91121762
50
92210001
28
91121775
54 + 55
92210002
28
K86...
91121776V01
56 + 57
92210003
22
K862232
21
58 + 59
92210012
76 + 77
K862748
24
48
92210013
76 + 77
K863032
23
92210014
76 + 77
92210015
76
911210..
91121012
38 + 39
91121777V01
91121013
40 + 41
91121792
911213..
911218..
91121363
17
91121823
73
91121364
18
91121826
52 + 53
91121388
27
91121864
51
97121242
78
91121389
29
91121872
47
97121253
81
97121...
5
Antenna Designs:
Antenna Families / RET-system
Distinguishing features
Design
Compact size and elegant design are the distinguishing features of Kathrein’s
­antenna families.
Radome
The radomes cover the internal antenna components. The fiberglass material
­guarantees optimum performance with regards to stability, strength, UV resistance, painting and weather protection. The colour of the radome of outdoor
panel antennas is similar to RAL 7035.
Environmental influences
Kathrein antenna designs are based on fundamental engineering knowledge
and also on our decades of practical experience, during which the various
­constructions and materials used have proved their outstanding reliability.
Environmental conditions
Kathrein cellular antennas are designed to operate under the environmental
­conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regards to the following items:
– Low temperature: –55 °C
– High temperature (dry): +60 °C
Environmental tests
Kathrein antennas are designed according to the specifications as defined
in ETS 300 019-2-4. The homogenous design of Kathreins antenna families
uses identical m
­ odules and materials. Extensive tests have been p
­ erformed
on ­typical ­samples and modules. The vibration test has been adapted r­ elating
to ­frequency and a
­ cceleration to the conditions of mast mounted antennas.
Impedance
Standard Impedance for all products is 50 Ω unless otherwise stated.
Great variety of
half-power beam width,
gain values,
electrical downtilt
According to the antenna type selected, customers can choose from d
­ ifferent
half-power beam widths, gain values and electrical downtilts for panel
­antennas. Downtilts are either fixed or adjustable and controlled by remote
­electrical tilt system (RET).
Low intermodulation
products (typ. <–153 dBc)
With many years of experience in the construction of antennas and ­intensive
research into the effects of intermodulation, we offer optimized ­material and
technology used for antennas (the given value r­efers to 3rd order p
­ roducts
measured with 2 carriers of 20 W each).
Excellent tracking
Tracking states the symmetry between the +45° and –45° polarized h
­ orizontal
­pattern. Bad tracking values lead to interferences in the network and reduced
­diversity ­performance. Kathreins special Tracking compensa­tion reduces the
­average value ­measured at ±60° to < 2–3 dB.
6
Antenna Designs:
Antenna Families / RET-system
Distinguishing features
Multi-array design
Besides standard single array antennas, Kathrein designs antennas p
­ roviding
multiple antenna arrays in one radome. These multi-array antennas do not
only supply a future-proof multiplicity of diverse frequency bands for various
technologies, but are also well-prepared for different MIMO-applications. The
­Kathrein portfolio contains a high variety of design solutions like ­interleaved
and side-by-side antenna types or combinations of both as well as filter
­realizations.
Multi-functional
installation hardware
Depending on the type, the antennas are equipped with up to 2 attachment
points. Panels can be wall-mounted without any additional hardware. For
mast-mounting, brackets and mechanical downtilt kits are available. To assist
the installation technicians in aligning the panels, an ­azimuth adjustment tool
can be supplied (see Mechanical Accessories).
MTBF Statement
Traditionally, passive components like antennas cannot be well calculated
due to the lack of a sufficient number of components in the MTBF library.
­Unfortunately, ­this constraint results in a very inaccurate calculation. Thus,
such results are ­technically questionable and unrealistic.
In essence, antennas are made out of mechnical parts that do not show any
­failure r­ ates. Only available failure rates can be calculated into an MTBF ­value.
­Consequently such components cannot be listed in any MTBF library.
Remote Electrical Tilt
­System AISG Compliancy
Kathrein hereby states that RET devices, as far as the functionality and
­features are described within the AISG / 3GPP standard, are compliant with
the ­standard.
NGMN-P-BASTA
All antennas which are measured according to the specifications given in
NGMN-P-BASTA White Paper Version 9.6 are clearly marked in the data sheet.
Kathrein is changing over more and more data sheets to NGMN-P-BASTA. The
latest data sheets can be found on our homepage.
RET RFID Functionality
Kathrein‘s latest Remote Control Unit (RCU) is equipped with an internal RFID
reader. Most of our antennas are equipped with RFID tags in their spindles.
With this, all relevant antenna data can automatically be read out by the RCU.
Further information as well as an up-to-date list of the antennas can be found
on our homepage. The according data sheets are marked by an RFID sign.
4.3-10 Connectors
Partly, Kathrein’s latest mobile communication antennas and antenna line
­products are equipped with 4.3-10 connectors.
The advantages of this connector are:
• Reduced dimensions on the bottom plate for more installation space
• Improved PIM stability and performance
• Easier installation, lower tightening torque
The universal 4.3-10 jack can be used with 3 different connector types (screw
type, push-pull type and hand screw type).
7
Downtilting of Antennas with external RCU:
Downtilt Possibilities
Mechanical downtilt
For further technical information please see “Mechanical Accessories”,
page 85.
Electrical downtilt
Description of the adjustment mechanism (protective cap removed):
1
1
2
2
➀ Twist protection.
➁ Downtilt spindle with
­integrated scale.
➀ Thread for fixing the pro­
tective cap or the RCU
(Remote Control Unit).
➁ Gearwheel for RCU power
drive.
To set the downtilt angle ­exactly, you must look
horizontally at the scale. The
lower edge of the gear­wheel
must be used for alignment.
Manual adjustment procedure:
0° – max.°
General Instructions for Feederline Installation
0° – max.°
for Dual-band Antennas
Remote
Set downtilt angle by rotating Screw on the twist protection
Remove the protective cap
theplease
gearwheel.
the
protective
cap again.
and the
protection
Please note: In order
not twist
to damage
the interfaces,
make sure that only theand
right
tools
are used.
completely.
Tighten the feederline
connector interfaces solely by using a common torque-wrench with a suitable wrench
Electricalwidth.
Tilt (RET) For further technical information please see “RET”, pages 88 and 89.
Description of bottom
end cap
(exemplary
Description
of bottom
end cappicture):
(exemplary picture):
Adjustment mechanism
(protective cap removed)
Ventilation hole
Spindle with tilting scale
7-16 female (long neck)
8
Colour coding:
Correlation of each RF input to:
– the corresponding adjustment mechanism
– the frequency range
– the polarization
Dimensions of Panels
Antenna dimensions and detailed connector position can be found on our current data sheets.
Please refer to the information on our latest data sheets which are available on our homepage:
www.kathrein.com
g Mobile Communication
An example is shown below of how the antenna dimensions are displayed on our data sheets:
R2
L
R2
4
L
880 - 960
L
6
1695-2690
Y1
L
5
1695-2690
R1
L
880 - 960
R1
L
2
1
698 - 862
698 - 862
Y2
R
8
1427-2690
Y2
R
7
1427-2690
97 | 3.8
Y1
3
140 | 5.5
164 | 6.5 *
229 | 9.0 *
1818 | 71.6
1999 | 78.7
Bottom view
131 | 5.2
221 | 8.7
311 | 12.2
1)
378 | 14.9 *
* Dimensions refer to radome
2)
2056 | 80.9
Front view
3)
1) 22 | 0.9
2) 150 | 5.9
3) ∅ 11 | 0.4
All dimensions in mm | inches
9
Kathrein Antennas
Product Description (Type)
6-Port Antenna LB/2HB 1.4m 65° | 698–960 14.5dBi | 2x1695–2690 18dBi
Number
of Ports
Frequency
Range(s)
Length
Horizontal
Half-power Beam Width(s)
Frequency Range
and Gain Value
10
Type
Type No.
Height
[mm]
Input
370–520 MHz
Summary – Antennas
370...6000 MHz
Page
Directional Antennas
2-Port Antenna
380–500
65°
12dBi
852626
992
2 x 7-16 female
12
2-Port Antenna
380–470
65°
14dBi
91121514
1999
2 x 7-16 female
13
2-Port Antenna
380–500
65°
15dBi
852627
2000
2 x 7-16 female
14
2-Port Antenna
380–500
88°
10.5dBi
852628
1007
2 x 7-16 female
15
2-Port Antenna
380–500
88°
13.5dBi
852629
1997
2 x 7-16 female
16
1-Port Antenna
380–500
65°
12dBi
91121363
992
7-16 female
17
1-Port Antenna
380–500
65°
15dBi
91121364
2000
7-16 female
18
1-Port LogPer
380–520
87°
9dBi
91121402
785
7-16 female
19
4-Port Antenna
380–470
698–791
88°
65°
13dBi
16dBi
91121959
2600
4 x 4.3-10 female
20
1-Port Omni
370–430
360°
2dBi
848114
555
N female
21
1-Port Omni
406–470
360°
2dBi
K862232
515
N female
21
1-Port Omni
380–3800
360°
3–8.5dBi
92210003
540
4.3-10 female
22
1-Port Omni
380–470
360°
4dBi
K863032
315
N female
23
1-Port Omni
380–400
360°
7.5dBi
K862748
2840
7-16 female
24
1-Port Omni
410–430
360°
8dBi
848657
3114
7-16 female
25
1-Port Omni
450–470
360°
8.5dBi
853266
3113
7-16 female
26
0°–14°T
2°T
2°T
Omnidirectional Antennas
8.5°T
Indoor Omnidirectional Antennas
1-Port Omni
380–405
360°
2dBi
91121388
77
N female
27
1-Port Omni
405–430
360°
2dBi
91121440
77
N female
27
1-Port Omni
450–470
360°
2dBi
91121743
77
N female
27
1-Port Omni
380...6000
360°
1–6dBi
92210001
187
N female
28
1-Port Omni
380...6000
360°
1–6dBi
92210002
187
4.3-10 female
28
Indoor Directional Antennas – Single-band
1-Port Indoor
380–405
90°
7dBi
91121389
302
N female
29
1-Port Indoor
405–430
90°
7dBi
91121441
302
N female
29
1-Port Indoor
440–470
90°
7dBi
91121744
302
N female
29
98121119
150
N female
30
98121116
150
N female
31
Special Purpose Antennas
Special Purpose Antenna
380–430
Special Purpose Antenna
380–430
Special Purpose Antenna
406–428
K8134321
70
M 11 x 1 female
32
Special Purpose Antenna
406–428
K8134322
70
N female
32
Special Purpose Antenna
410–470
K813132
142
N female
33
GPS 1575
New or changed product
11
Panel
Dual Polarization
Half-power Beam Width
380–500
X
65°
2-Port Antenna 380–500 1.0m 65° 12dBi
852626
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/–45°
Front-to-back ratio
Isolation
Impedance
VSWR
Intermodulation IM3
Max. power per input
380 – 430 MHz
+45°, −45°
11.5 dBi
Horizontal: 68°
Vertical:
37°
380–500
430 – 500 MHz
+45°, −45°
12 dBi
Horizontal: 65°
Vertical:
32°
> 25 dB
> 30 dB
50 Ω
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Radiator: Tin-plated copper.
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and
the ­protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
The metal parts of the antenna including
the mounting kit and the inner conductors
are DC grounded.
380 – 430 MHz: +45°/−45° Polarization
136°
7-16
Mechanical specifications
dB
dB
3
0
0
Horizontal Pattern
Input
Connector position
Wind load
Vertical Pattern
430 – 500 MHz: +45°/−45° Polarization
122°
65°
32°
dB
0
Horizontal Pattern
3
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
2 x 7-16 female
Rearside
Frontal:
500 N (at 150 km/h)
Lateral:
220 N (at 150 km/h)
Rearside:
715 N (at 150 km/h)
200 km/h
992 / 492 / 190 mm
M (Medium)
12 kg
1140 x 523 x 252 mm
dB
10
10
12
7-16
10
10
3
380–500
+45°
68°
37°
3
380–500
–45°
0
Vertical Pattern
For more information about additional mounting accessories please refer to page 82
Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt
380–470
X
370–520 MHz
65°
0°– 14°
set by hand or by optional RCU (Remote Control Unit)
2-Port Antenna 380–470 2.0m 65° 14dBi 0°–14°T
91121514
Type No.
Frequency range
Polarization
Gain (dBi)
Tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar
(180° ±30°)
Cross polar ratio
0°
Maindirection
±60°
Vertical Pattern:
Half-power beam width
Electrical tilt
Isolation
Impedance
VSWR
Intermodulation IM3
Max. power per input
380 – 430 MHz
+45°, −45°
13.5 ... 13 ... 12.5
0° ... 7° ... 14°
380–470
430 – 470 MHz
+45°, −45°
14 ... 13.5 ... 13
0° ... 7° ... 14°
66°
62°
> 25 dB
Typically: 25 dB
> 10 dB
22°
19°
0° – 14°, continuously adjustable
> 30 dB
50 Ω
< 1.5
< −150 dBc (2 x 43 dBm carrier)
400 W (at 50 °C ambient temperature)
Material:
Radiator: Tin-plated copper.
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and
the ­protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
The metal parts of the antenna including
the mounting kit and the inner conductors
are DC grounded.
430 – 470 MHz: +45°/−45° Polarization
115°
10
7-16
7-16
3
Mechanical specifications
dB
dB
10
0
0
Horizontal Pattern
Vertical Pattern
0° – 14° electrical downtilt
380 – 430 MHz: +45°/−45° Polarization
122°
66°
22°
dB
0
Horizontal Pattern
3
dB
10
10
3
380 – 470
+45°
62°
19°
3
380 – 470
–45°
0
Input
Connector position
Adjustment
mechanism
Wind load
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
2 x 7-16 female
Bottom
1 x, Position bottom
continuously adjustable
Frontal:
1160 N (at 150 km/h)
Lateral:
480 N (at 150 km/h)
Rearside: 1870 N (at 150 km/h)
200 km/h
1999 / 575 / 199 mm
H (Heavy)
22 kg
2250 x 640 x 225 mm
Vertical Pattern
0° – 14° electrical downtilt
For more information about additional mounting accessories please refer to page 82
13
Panel
Dual Polarization
Half-power Beam Width
380–500
X
65°
2-Port Antenna 380–500 2.0m 65° 15dBi
852627
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/–45°
Front-to-back ratio
Isolation
Impedance
VSWR
Intermodulation IM3
Max. power per input
380–500
380 – 430 MHz
430 – 500 MHz
+45°, −45°
+45°, −45°
14.5 dBi
15 dBi
Horizontal: 65°
Vertical:
18°
> 25 dB
> 30 dB
50 Ω
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Radiator: Tin-plated copper.
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and
the ­protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
The metal parts of the antenna including
the mounting kit and the inner conductors
are DC grounded.
+45°/−45° Polarization
120°
7-16
7-16
0
Horizontal Pattern
dB
3
Mechanical specifications
Input
Connector position
Wind load
10
dB
10
14
380–500
+45°
65°
18°
3
380–500
–45°
0
Vertical Pattern
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
2 x 7-16 female
Rearside
Frontal:
1100 N (at 150 km/h)
Lateral:
440 N (at 150 km/h)
Rearside: 1540 N (at 150 km/h)
200 km/h
2000 / 492 / 190 mm
H (Heavy)
19 kg
2080 x 523 x 252 mm
For more information about additional mounting accessories please refer to page 82
Panel
Dual Polarization
Half-power Beam Width
380–500
X
370–520 MHz
88°
2-Port Antenna 380–500 1.0m 88° 10.5dBi
852628
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/–45°
Front-to-back ratio, copolar
Isolation
Impedance
VSWR
Intermodulation IM3
Max. power per input
380–500
380 – 430 MHz
430 – 500 MHz
+45°, −45°
+45°, −45°
2 x 10 dBi
2 x 10.5 dBi
Horizontal: 88°
Horizontal: 86°
Vertical:
40°
Vertical:
35°
> 20 dB
> 20 dB
> 30 dB
> 30 dB
50 Ω
50 Ω
< 1.5
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and
the ­protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
The metal parts of the antenna including
the mounting kit and the inner conductors
are DC grounded.
430 – 500 MHz: +45°/−45° Polarization
86°
380–500
–45°
380–500
+45°
7-16
7-16
35°
165°
10
3
0
Mechanical specifications
dB
3
dB
10
Input
Connector position
Wind load
0
Horizontal Pattern
Vertical Pattern
380 – 430 MHz: +45°/−45° Polarization
88°
40°
165°
dB
3
0
Horizontal Pattern
3
M (Medium)
10.5 kg
1140 x 330 x 240 mm
dB
10
10
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
2 x 7-16 female
Bottom
Frontal:
420 N (at 150 km/h)
Lateral:
220 N (at 150 km/h)
Rearside:
540 N (at 150 km/h)
200 km/h
1007 / 317 / 193 mm
0
Vertical Pattern
For more information about additional mounting accessories please refer to page 82
15
Panel
Dual Polarization
Half-power Beam Width
380–500
X
88°
2-Port Antenna 380–500 2.0m 88° 13.5dBi
852629
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/–45°
Front-to-back ratio, copolar
Isolation
Impedance
VSWR
Intermodulation IM3
Max. power per input
380–500
380 – 430 MHz
430 – 500 MHz
+45°, −45°
+45°, −45°
2 x 13 dBi
2 x 13.5 dBi
Horizontal: 88°
Horizontal: 86°
Vertical:
20°
Vertical:
17°
> 20 dB
> 20 dB
> 30 dB
> 30 dB
50 Ω
50 Ω
< 1.5
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and
the ­protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
The metal parts of the antenna including
the mounting kit and the inner conductors
are DC grounded.
430 – 500 MHz: +45°/−45° Polarization
86°
165°
17°
0
7-16
Input
Connector position
Wind load
0
Vertical Pattern
380 – 430 MHz: +45°/−45° Polarization
88°
165°
20°
dB
0
Horizontal Pattern
3
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
2 x 7-16 female
Bottom
Frontal:
890 N (at 150 km/h)
Lateral:
480 N (at 150 km/h)
Rearside: 1150 N (at 150 km/h)
200 km/h
1997 / 317 / 193 mm
H (Heavy)
18.5 kg
2130 x 330 x 240 mm
dB
10
10
16
7-16
Mechanical specifications
dB
dB
3
Horizontal Pattern
3
380–500
+45°
10
10
3
380–500
–45°
0
Vertical Pattern
For more information about additional mounting accessories please refer to page 82
Multi-band Panel
Vertical Polarization
Half-power Beam Width
380–500
V
370–520 MHz
65°
1-Port Antenna 380–500 1.0m 65° 12dBi
91121363
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/–45°
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
Max. power per input
380 – 430 MHz
Vertical
11.5 dBi
Horizontal: 68°
Vertical:
37°
> 18 dB
380–500
430 – 500 MHz
Vertical
12 dBi
Horizontal: 63°
Vertical:
32°
> 20 dB
50 Ω
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Reflector screen: Weather-proof aluminum.
Radiator: Tin-plated copper.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and
the ­protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
The metal parts of the antenna including
the mounting kit and the inner conductors
are DC grounded.
380 – 430 MHz
136°
68°
37°
10
3
0
Mechanical specifications
dB
3
dB
10
0
Horizontal Pattern
Input
Connector position
Wind load
Vertical Pattern
430 – 500 MHz
122°
63°
32°
dB
3
0
Horizontal Pattern
3
M (Medium)
12 kg
1140 x 523 x 252 mm
dB
10
10
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
1 x 7-16 female
Rearside
Frontal:
500 N (at 150 km/h)
Lateral:
220 N (at 150 km/h)
Rearside:
715 N (at 150 km/h)
200 km/h
992 / 492 / 190 mm
0
Vertical Pattern
For more information about additional mounting accessories please refer to page 82
17
Multi-band Panel
Vertical Polarization
Half-power Beam Width
380–500
V
65°
1-Port Antenna 380–500 2.0m 65° 15dBi
91121364
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Copolar +45°/–45°
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
Max. power per input
380 – 430 MHz
Vertical
14.5 dBi
Horizontal: 68°
Vertical:
18°
380–500
430 – 500 MHz
Vertical
15 dBi
Horizontal: 63°
Vertical:
16°
> 20 dB
50 Ω
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Reflector screen: Weather-proof aluminum.
Radiator: Tin-plated copper.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.
Ice protection:
Due to the very sturdy antenna construction and
the ­protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.
Grounding:
The metal parts of the antenna including
the mounting kit and the inner conductors
are DC grounded.
380 – 430 MHz
136°
68°
18°
3
0
Mechanical specifications
dB
3
10
dB
10
Input
Connector position
Wind load
0
Horizontal Pattern
Vertical Pattern
430 – 500 MHz
122°
63°
16°
0
Horizontal Pattern
18
3
H (Heavy)
20 kg
2080 x 523 x 252 mm
dB
3
10
dB
10
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
1 x 7-16 female
Rearside
Frontal:
1100 N (at 150 km/h)
Lateral:
440 N (at 150 km/h)
Rearside: 1540 N (at 150 km/h)
200 km/h
2000 / 492 / 190 mm
0
Vertical Pattern
For more information about additional mounting accessories please refer to page 82
Logarithmic-periodic
Vertical Polarization
Half-power Beam Width
380–520
V
370–520 MHz
87°
1-Port LogPer Antenna 380–520 0.8m 87° 9dBi
Type No.
Frequency range
Polarization
Gain
Half-power beam width
Impedance
VSWR
Intermodulation IM3
Max. power per input
380 – 410 MHz
91121402
410 – 470 MHz
470 – 520 MHz
Vertical
9.2 dBi
9 dBi
8.7 dBi
Horizontal: 80°
Horizontal: 85°
Horizontal: 88°
Vertical:
61°
Vertical:
60°
Vertical:
59°
50 Ω
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Scope of supply:
Antenna with weather protective casing for straight connectors.
Material:
Radiator: Weather resistant aluminium.
Radome: Fiberglass, colour: White.
All screws and nuts: Stainless steel.
Attachment:
To tubular masts of 50–380 mm diameter depending on the
separate available clamps.
Ice protection:
Due to the very sturdy antenna construction and the protection
of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Grounding:
All metal parts of the antenna including the mounting kit and
the inner conductor are DC grounded.
380 – 410 MHz
80°
108°
139°
61°
3
dB
10
0
Horizontal Pattern
Vertical Pattern
410 – 470 MHz
85°
107°
145°
60°
Mechanical specifications
dB
3
dB
3
Input
Connector position
Wind load
10
10
0
0
Horizontal Pattern
Max. wind velocity
Height/width/depth
Weight
Packing size
Vertical Pattern
470 – 520 MHz
88°
148°
107°
7-16 female
Rearside, pointing downwards
Frontal:
54 N (at 150 km/h)
Lateral:
150 N (at 150 km/h)
180 km/h
785 / 400 / 400 mm
6 kg
915 x 485 x 485 mm
59°
3
dB
10
0
Horizontal Pattern
Vertical Pattern
For more information about additional mounting accessories please refer to page 82
19
Panel
380–470380–470
698–791698–791
al-band Panel
X
X
X
Dual Polarization X
al Polarization
88° 65°
65°
88°
HPBWWidth
lf-power Beam
2° 2°
2°
Fixed
Electrical DT 2°
ed Electrical
Downtilt
Special Communications
Preliminary
Issue
Preliminary
Issue
ol Pane l 380-470/698-791 88°/65° 13dBi/16dBi 2°/2°
e No.
4-Port Antenna 380–470/698–791 2.6m 88°/65° 13/16dBi 2°/2°T
uency range Type No.
380-470 MHz
91121959
91121959698-791 MHz
380–470
+45° , -45°
Frequency range
380 – 470 MHz
enna Gain
2x 13 dBi+45°, −45°
Polarization
Gain
2 x 13 dBi
zontal Pattern:
Horizontal Pattern:
-pow er beam w idth
88°
Half-power beam width
88°
t-to-back ratio
Copolar:
> 20dB
Front-to-back ratio, copolar
> 20 dB
tical Pattern: Vertical Pattern:
-pow er beam wHalf-power
idth
14°
beam width
14°
trical tilt
2°, fixed 2°, fixed
Electrical tilt
698–791
+45°
, -45°
698
– 791
MHz
2 x 16
dBi
+45°,
−45°
2 x 16 dBi
rization
Impedance
VSWR
Isolation: Intrasystem
WR
Isolation: Intersystem
tion: Intrasystem
Intermodulation IM3
(2 x 43 dBm carrier)
tion: Intersystem
modulation IM3 Max. power per input
dance
8°
8°
2°,fixed
f ixed
2°,
50 Ω
< 1.5
> 25 dB
50
< 1.5
> 25 dB
> 25dB
< −150 dBc
< -150 dBc 250 W*
43 dBm carrier)
. pow er per input
65°
65°
> 20dB
> 20 dB
Copolar:
> 25dB
50 Ω
<50
1.5
> 25
dB
< 1.5
> 25 dB
< −150 dBc
W*dBc
< 250
-150
* (at 50 °C ambient temperature)
250 W *
250 W *
* (at 50°C ambient temperature)
80 – 470 MHz: +45°/-45° Polarization
380-470
-45°
380 – 470 MHz: +45°/−45° Polarization
88°
14°
4.3-10
165°
14°
3
0
0
Horizontal Pattern
698-791
+45°
698 –791
–45°
4.3-10
4.3-10
4.3-10
4.3-10
698 –791
+45°
4.3-10
Mechanical specifications
dB
dB
3
698-791
-45°
380 – 470
+45°
4.3-10
M echanical s pecifications
10
10
380-470
+45°
380 – 470
–45°
4.3-10
Input
4 x 4.3-10 f emale
4 x 4.3-10 female
Connector positionInput
Backside
Connector
Position 480 N (at 150 km/h)Backside
Wind load
Frontal:
Vertical Pattern
Wind load (at Rated
N | lbf
Frontal:
480 | 108
Lateral:
190 N (at 150
km/h)
Wind Speed:
150 km/h)
Lateral:
190 | 43
Rearside:
480 | 108
Rearside: 480 N (at 150
km/h)
+45°/−45° Polarization
Max. Wind Velocity
km/h
200
Max. w ind velocity
200
km/h
mph
124
Height/w idth/depthHeight / Width /2600
Depth/ 317
mm/ 193 mm 2600 / 317 / 193
102.4 / 12.5 / 7.6
H inches
(Heavy)
Category of
Category of
8°
H (Heavy)
mounting hardw are
Mounting ­Hardware
8°
Weight
26.0 / 28.2 (clamps incl.)
Weight
26kgkg
10
lb
57.3 / 62.3 (clamps incl.)
Packing size
2733 x 330 x 240 mm
Packing Size
mm
2733 / 330 / 240
3
Scope of s upply
107.6 / 13.0 / 9.5
Panel and 2inches
units of clamps
0
Scope of Supply
Panel and 2 units of clamps
f or 50 – 115 mm diameter
for 42 –115 mm |
Vertical Pattern
1.7– 4.5 inches diameter
698 – 791 MHz:
125°
67°
3
dB
10
0
Horizontal Pattern
20
dB
98 – 791 MHz: +45°/-45° Polarization
90021959 Page 1 of 2
For more information about additional mounting accessories please refer to page 82
370...470
V
370–520 MHz
Omnidirectional Antennas
Vertical Polarization
848114: 1-Port Omni Antenna 370–430 0.5m 360° 2dBi
K862232: 1-Port Omni Antenna 406–470 0.5m 360° 2dBi
848114
Type No.
370 – 430 MHz
K862232
406 – 470 MHz
Vertical
2 dBi
50 Ω
370 – 380 MHz: < 1.6
< 1.5
380 – 430 MHz: < 1.5
< −150 dBc ( 2 x 37 dBm carrier)
100 W (at 50 °C ambient temperature)
Intermodulation IM3
Max. power
Height
Frequency range
Polarization
Gain
Impedance
VSWR
Material:
Radiator: Brass.
Radome: Fiberglass, dia. 21 mm, colour: Grey.
Base: Aluminum.
Mounting U-bolt and all screws and nuts: Stainless steel.
Mounting:
The antenna can be attached in two ways with
the supplied mounting kit:
1. On the tip of a tubular mast of 40–54 mm
­diameter (connecting cable runs inside the
mast).
2. Laterally at the tip of a tubular mast of
20–54 mm diameter (connecting cable runs
outside the mast).
Grounding:
All metal parts of the antenna including the
mounting kit are DC grounded.
On the tip of a
tubular mast
78°
3
dB
10
0
Vertical Pattern
Mechanical
specifications
Input
Connector position
Wind load
N
(at 150 km/h)
lbf
Max. wind
km/h
velocity
mph
Radome
mm
diameter
inches
Weight
kg
lb
Height
mm
inches
Packing size
mm
inches
Laterally at the tip
of a tubular mast
848114
K862232
N female
Bottom
20
4
200
124
21
2.0
1.0
2.2
555
21.9
112 x 97 x 654
4.4 x 3.8 x 25.7
0.8
1.7
515
20.3
112 x 97 x 614
4.4 x 3.8 x 24.2
21
1-Port Omni Antenna
Vertical Polarization
380–3800
V
•Ultra wide band omni directional Antenna with small ground
plane.
•Excellent Omni directional coverage.
•The antenna is PIM certified, thus making it suitable for all
multi-carrier.
1-Port Omni Antenna 0.5m 360° | 380–3800 3–8.5dBi
92210003
Type No.
Frequency range
Polarization
Pattern
Gain
Impedance
VSWR, max.
MHz
dBi
Ω
VSWR, typical
PIM, 3rd order
Max. power
dBc
W
Mounting:
380–3800
Linear, Vertical
Omni directional
380–400 MHz: 3
400–450 MHz: 4
450–470 MHz: 5
694–746 MHz: 6
746–960 MHz: 7
1200–2700 MHz: 8
3300–3800 MHz: 8.5
50
380–410 MHz: 2.8 : 1
410–3800 MHz: 2.2 : 1
< 1.7
< −150 (2 x 20 W, typ.)
50 (at 50 °C ambient temperature)
Mounting with U-bolts
2ʺ Pole Mount.
There are two possibilities to mount the Antenna:
1) The antenna can be attached laterally at the
tip of a tubular mast of 50.8 mm | 2.0 inches
with two U-bolt brackets supplied.
2) The antenna can be attached laterally at the
tip of a tubular mast with a pair of tension
bands (please order separately).
Material:
Radiator: PCB. Radome: UV protected plastic.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Anti-static protection:
All metal parts of the antenna as well as the
clamps are grounded.
Lightning protection:
The antenna is not lightning protected.
Environmental conditions: Operating temperature range: −40°C to +70 °C
Vibration: According to IEC 60721-3-4
Flammability: UL94
Water proofing: IP 65
Humidity: ETS 300 019-1-4.
EN 302 085 (Annex A. 1.1)
Salt fog: According to IEC 68-2-11
Mounting with
tension bands
Mechanical specifications
Input
Connector position
Max. wind velocity km/h
(Survival)
mph
Height
mm
inches
Radome diameter
mm
inches
Weight
kg
lb
Ground plane
mm
inches
Accessories (order separately)
Type No.
734365
734364
Description
Remarks
mm | inches
Weight approx.
kg | lb
Units per
antenna
Tension bands
Tension bands
Mast diameter: 45–120 | 1.8– 4.7
Mast diameter: 120– 140 | 4.7–5.5
0.08 | 0.18
0.11 | 0.24
1
1
Accessories (included in the scope of supply)
U-bolt brackets
22
Mast diameter: 50.8 |2.0
1
4.3-10 female
Bottom
200
125
540
21.26
60
2.26
0.5
1.1
165 x 165 x 1.5
6.5 x 6.5 x 0.06
380–470
V
370–520 MHz
Half-wave Dipole Side-mounted
Vertical Polarization
•Omnidirectional antenna with variable antenna-to-mast
­distance.
•Depending on the distance of the radiator from the mast
edge and also on the mast diameter, various radiation
­patterns can be achieved.
1-Port Omni Antenna VPol 380–470 360° 4dBi
K863032
Type No.
Frequency range
Polarization
Gain
Impedance
VSWR
Max. power per input
MHz
dBi
Ω
W
380 – 470
Vertical
4
50
400 – 470 MHz: < 1.5
380 – 400 MHz: < 1.5; A = λ/4
380 – 400 MHz: < 2.0; A > λ/4
450 (at 50 °C ambient temperature)
Material:
Radiator: Hot-dip galvanized steel.
Horizontal support pipe: Stainless steel.
Mount: Aluminum.
Tightening band and all screws and nuts:
Stainless steel.
Feedpoint radome: Fiberglass.
Attachment:
To tubular masts of 60–320 mm | 2.4–12.6 inches
diameter using supplied stainless steel
tightening band (20 mm wide, 0.8 mm gauge) |
(0.8 inches wide, 0.03 inches gauge).
Special features:
The distance from tubular mast to radiator is
adjustable from 170–580 mm | 6.7–22.8 inches.
Grounding:
All metal parts of the antenna including
the inner conductor and the supplied mount are
DC grounded.
Horizontal radiation pattern: Depending on the distance A (edge of pipe mast
to dipole) – see sketch.
580 | 22.8
ce
an
ist
D
A
314 | 12.4
M = 15 Nm
Mechanical specifications
All dimensions in mm | inches
Input
Wind load
N
(at 150 km/h)
lbf
Max. wind
km/h
velocity
mph
Length
mm
inches
Weight
kg
lb
Packing size
mm
inches
N female
40
9
200
124
315
12.4
1.6
3.5
880 x 330 x 100
34.6 x 13.0 x 3.9
23
Omnidirectional Antenna
Vertical Polarization
380–400
V
1-Port Omni Antenna 380–400 2.8m 360° 7.5dBi
K862748
Type No.
380 – 400 MHz
Vertical
7.5 dBi
50 Ω
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50–94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Anti-static protection:
All metal parts of the antenna as well as the
­supplied clamp attachment are grounded.
The inner conductor is capacitively coupled.
Lightning protection:
The antenna is designed to withstand a lightning
current of up to 150 KA (impulse: 10/350 µs),
according to IEC 62305 parts 1–4 and
VDE 0855-300, and thereby fulfils the requirements of lightning ­protection class II. Grounding
cross-section: 22 mm2 copper.
2840 mm
Frequency range
Polarization
Gain
Impedance
VSWR
Intermodulation IM3
Max. power per input
150
230
um
maximtop
mast
104
Mechanical specifications
17°
3
0
dB
10
Input
Connector position
Wind load
Max. wind velocity
Height
Radome diameter
7-16 female
Bottom
200 N (at 150 km/h)
200 km/h
2840 mm
51 mm
Weight
Packing size
8.0 kg
3316 x 148 x 112 mm
Vertical Pattern
24
Side-mounting brackets see page 83 + 84
410–430
V
8.5°
370–520 MHz
Omnidirectional Antenna
Vertical Polarization
Fixed Electrical Downtilt
1-Port Omni Antenna 410–430 3.0m 360° 8dBi 8.5°T
848657
Type No.
410 – 430 MHz
Vertical
8 dBi
8.5°, fixed
50 Ω
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50–94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Anti-static protection:
All metal parts of the antenna as well as the
­supplied clamp attachment are grounded.
The inner conductor is capacitively coupled.
Lightning protection:
The antenna is designed to withstand a lightning
current of up to 150 KA (impulse: 10/350 µs),
according to IEC 62305 parts 1–4 and
VDE 0855-300, and thereby fulfils the requirements of lightning ­protection class II. Grounding
cross-section: 22 mm2 copper.
3114 mm
Frequency range
Polarization
Gain
Electrical tilt
Impedance
VSWR
Intermodulation IM3
Max. power per input
150
230
um
maximtop
mast
104
Mechanical specifications
14°
3
dB
10
0
Input
Connector position
Wind load
Max. wind velocity
Height
Radome diameter
7-16 female
Bottom
220 N (at 150 km/h)
180 km/h
3114 mm
51 mm
Weight
Packing size
8.0 kg
3376 x 196 x 102 mm
Vertical Pattern
8.5° electrical downtilt
Side-mounting brackets see page 83 + 84
25
Omnidirectional Antenna
Vertical Polarization
450–470
V
1-Port Omni Antenna 450–470 3.0m 360° 8.5dBi
853266
Type No.
450 – 470 MHz
Vertical
8.5 dBi
50 Ω
< 1.5
< −150 dBc ( 2 x 43 dBm carrier)
500 W (at 50 °C ambient temperature)
Material:
Radiator: Copper and brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Mounting:
The antenna can be attached laterally at the tip
of a tubular mast of 50–94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).
Anti-static protection:
All metal parts of the antenna as well as the
­supplied clamp attachment are grounded.
The inner conductor is capacitively coupled.
Lightning protection:
The antenna is designed to withstand a lightning
current of up to 150 KA (impulse: 10/350 µs),
according to IEC 62305 parts 1–4 and
VDE 0855-300, and thereby fulfils the requirements of lightning ­protection class II. Grounding
cross-section: 22 mm2 copper.
3113 mm
Frequency range
Polarization
Gain
Impedance
VSWR
Intermodulation IM3
Max. power per input
150
230
um
maximtop
mast
104
Mechanical specifications
12°
3
0
dB
10
Input
Connector position
Wind load
Max. wind velocity
Height
Radome diameter
7-16 female
Bottom
220 N (at 150 km/h)
180 km/h
3113 mm
51 mm
Weight
Packing size
8.0 kg
3379 x 206 x 152 mm
Vertical Pattern
26
Side-mounting brackets see page 83 + 84
380...470
V
370–520 MHz
Indoor Omnidirectional Antennas
Vertical Polarization
• The antennas need no additional groundplane.
91121388: 1-Port Indoor Antenna 380–405 360° 2dBi
91121440: 1-Port Indoor Antenna 405–430 360° 2dBi
91121743: 1-Port Indoor Antenna 450–470 360° 2dBi
91121388
Type No.
Frequency range
Polarization
Gain
Impedance
VSWR
Max. power
Input
Protection class
Weight
Packing size
Diameter
Height
91121440
91121743
380 – 405 MHz
405 – 430 MHz
450 – 470 MHz
Vertical
Vertical
Vertical
Approx. 2 dBi
Approx. 2 dBi
Approx. 2 dBi
50 Ω
50 Ω
50 Ω
< 2.0
< 2.0
< 2.0
50 W (at 50 °C ambient temperature)
1 x N female
IP 30
429 g
267 x 267 x 114 mm
258 mm
77 mm (without connector)
Material:
Reflector: Aluminium.
Radome: High impact polystyrol, colour: White.
Additional painting is possible.
Mounting:
Three holes in the base enable a mounting on the ceiling.
Two types of screws are supplied. For the N connector a
hole in the ceiling with a diameter of 35 mm is required.
Grounding:
All metal parts including the inner conductor
are DC grounded.
Available accessories:
Power splitters (380–512 MHz)
1
160 mm diameter
1.6 mm
3 holes 5 mm diameter
N connector, female
15.3 mm
min. dia. 35 mm
Press radome against installed reflector.
2
min. dia. 35 mm
Rotate radome until it locks in place.
3
min. dia. 35 mm
Pull downwards to remove radome.
27
1-Port Indoor
Omni Antenna
Vertical Polarization
380...6000
V
•The Multi-band Omni Antenna covers all the bands of Tetra,
2G and 3G cellular, as well as Wi-Fi and LTE.
•The antenna is aesthetic and has unobtrusive profile that
blends easily with any environment.
•The antenna is easy-installed and is highly recommended as
an outstandig logistic solution for in-bulding installations.
•The antenna is PIM certified, thus making it suitable for all
multi-carrier systems.
1-Port Indoor 380...6000 360° 1–6dBi
Type No.
Frequency range
Polarization
Gain (typ.)
Impedance
VSWR (max.)
Intermodulation IM3
Max. power
Flammability
Weight
Diameter
Height
Input
MHz
380–806
806–960
dBi
Ω
1 (2*)
4
3:1 (2.5:1*)
2:1
dBc
W
g
mm
mm
92210001 / 92210002
1395–1432
2300–2500
1710–2170
Linear, Vertical
5
5
50
2:1
2:1
< −155 (2 x 20 dBm carrier)
50 (at 50 °C ambient temperature)
UL94
550
275
187 (without connector)
92210001:
N female
92210002: 4.3-10 female
3300–3700
4900–6000
5
6
1.9:1
1.9:1
* Specifications for ground plate of 40 cm and up, above a metal surface, with a spacing of 35–45 mm.
Material:
Back plane: Aluminum; protected through ­chemical passivation.
Radome: UV protected polycarbonate.
Mounting:
Ceiling mounting.
Grounding:
All metal parts including the inner conductor are DC grounded.
∅ 200.0
PATENT PENDING PLATE
189.8
Connector
DANGEROUS PLATE
Connector
28
15.4
3 x ∅ 3.2
∅ 274.1
380...470
V
90°
370–520 MHz
Indoor Directional Antennas
Vertical Polarization
Half-power Beam Width
91121389: 1-Port Indoor Antenna 380–405 90° 7dBi
91121441: 1-Port Indoor Antenna 405–430 90° 7dBi
91121744: 1-Port Indoor Antenna 450–470 90° 7dBi
Frequency range
Polarization
Gain
Half-power beam width
Impedance
VSWR
Max. power
Input
Protection class
Weight
Packing size
Height/width/depth
91121389
91121441
91121744
380 – 405 MHz
405 – 430 MHz
450 – 470 MHz
Vertical
Vertical
Vertical
Approx. 7 dBi
Approx. 7 dBi
Approx. 7 dBi
Horizontal: Approx. 90° Horizontal: Approx. 90° Horizontal: Approx. 90°
50 Ω
50 Ω
50 Ω
< 2.0
< 2.0
< 2.0
50 W (at 50 °C ambient temperature)
N female connector
IP 30
1390 g
315 x 252 x 62 mm
302 x 243 x 50 mm
Material:
Reflector: Copper.
Radome: High impact polystyrol, colour: White.
Additional painting is possible.
Mounting plates: Stainless steel.
Mounting:
Two holes of 6 mm diameter in the mounting plate.
Screws are not supplied.
Grounding:
All metal parts including the inner conductor are
DC grounded.
Available accessories:
Power splitters (380–512 MHz)
90°
10
3
dB
Type No.
0
Horizontal Pattern
Mounting:
Mount the attachment plate to the wall
using two screws of 4 mm diameter
in the position as indicated.
Align the antenna over the attachment
plate.
Pull the antenna down to the
stop.
29
Special Purpose Antenna
380–430 MHz
98121119
•Low profile antenna in fiberglass radome.
•The antenna fulfils the requirements according to EN 50155.
W
g | lb
g | lb
mm
inches
mm
inches
Material:
Radiator: Copper and brass.
Flange: Aluminum. Radome: Fiberglass.
All screws and nuts: Stainless steel.
Colour: Grey.
Sealing: Neoprene and silicon. Note: Don’t use
detergents that might harm the sealing.
On a conductive surface with a minimum size
of 1000 x 1000 mm | 39.4 x 39.4 inches using
4 M10 bolts.
Grounding and
high voltage protection:
This antenna, tested by an independent institute,
is DC grounded to protect against lightning and
high-tension lines.
85 | 3.3
56 | 2.3
contact area
seal
Input Antenna
400 MHz
32
43 | 1.7
Mounting:
Mounting flange:
142 | 5.6
dB
Ω
N female
380 – 430
< 1.7
0 (ref. to the quarter-wave antenna)
50
Vertical
100 (at 50° C ambient temperature)
DC grounded
186 | 0.4
Approx. 500 | 1.1
150 x 90 x 190
5.9 x 3.5 x 7.5
150
5.9
11 | 0.4
diameter
MHz
115 | 4.5
Antenna
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Max. power
Inner conductor
Radome weight
Total weight
Packing size, L x W
xH
Height
98121119
145 | 5.7
Type No.
82 | 3.2
contact area
Mounting hole for the connector: 33 (max. 35) mm |
1.3 (max. 1.4) inches diameter.
Note: Keep mounting surface clear of paint for
­electrical contact.
Evenness of opposite surface 0.2 mm | 0.008 inches.
Use a cap nut or hex-head screw plus the enclosed
sealing washer.
Added sealing
washer
Cap nut
M10 DIN 1587
torque
15 Nm – 20 Nm
15 |150.6
Hex-head screw M10
torque
15 Nm – 20 Nm
Situation of mounting
All dimensions in mm | inches
30
370–520 MHz
Special Purpose Antenna
380–430 MHz and GPS 1575 MHz
98121116
•Two-band antenna: 380–430 MHz and GPS.
•The antenna can be operated in both frequency ranges
­simultaneously.
•Low profile antenna in fiberglass radome.
•The antenna fulfils the requirements according to EN 50155.
Radiator: Copper and brass.
Flange: Aluminum. Radome: Fiberglass.
All screws and nuts: Stainless steel.
Colour: Grey.
Sealing: Neoprene and silicon. Note: Don’t use
detergents that might harm the sealing.
Mounting:
On a conductive surface with a minimum size
of 1000 x 1000 mm using 4 M10 bolts.
Grounding and
high voltage protection:
This antenna, tested by an independent institute
and approved by the “Deutsche Bahn AG”, is
DC grounded to protect against lightning and
high-tension lines.
85
56
contact area
seal
Input Antenna
GPS
Input Antenna
400 MHz
32
82
142
Material:
Mounting flange:
11 mm diameter
Impedance
Inner conductor
Radome weight
Total weight
Packing size
Height
Cable RG 316/U of 225 mm length
with TNC male connector
1575.42 ±1 MHz
< 1.5
Right hand circular
2 dB (ref. to the circularly polarized
isotropic antenna)
50 Ω
DC grounded
186 g
Approx. 500 g
150 x 90 x 190 mm
150 mm
115
Frequency range
VSWR
Polarization
Gain (90° elevation)
N female
380 – 430 MHz
< 1.7
0 dB (ref. to the quarter-wave antenna)
50 Ω
Vertical
100 W (at 50° C ambient temperature)
DC grounded
43
Antenna 380 – 430 MHz
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Max. power
Inner conductor
Antenna GPS
Input
98121116
145
Type No.
contact area
Accessories:
Low noise amplifier GPS 86010142 (please order
separately).
Mounting hole for the connector: 33 (max. 35) mm
diameter.
Warning:
If the antenna is operated without the pre-­
amplifier type no. 86010142, please note the
­following points.
–D
ue to the fact that the inner conductor of the
antenna GPS is DC grounded, the input of the
GPS receiver is loaded with a DC short circuit.
If the GPS receiver provides a remote DC ­power
supply, this could damage the GPS receiver.
– At the input of the antenna GPS a level of
−25 dB below the signal applied at the input
of the antenna 380–430 MHz appears.
­Depending on the level of the signal applied
at the input of the antenna 380–430 MHz, the
GPS receiver may be overloaded or damaged.
Note: Keep mounting surface clear of paint for electrical contact.
Evenness of opposite surface 0.2 mm.
Use a cap nut or hex-head screw plus the enclosed
sealing washer.
Added sealing
washer
Cap nut
M10 DIN 1587
torque
15 Nm – 20 Nm
15
Hex-head screw M10
torque
15 Nm – 20 Nm
Situation of mounting
31
Special Purpose Antenna
406–428 MHz
K8134321, K8134322
Tram and Bus Antenna 406–428
Type No.
Input
Drill hole
­dimension
Frequency range
VSWR
Gain
Impedance
Polarization
Max. power
Weight
Packing size
(outside)
Height
Mounting
K8134321
K8134322
M 11 x 1 female
N female
(the connector for cable RG
58 C/U is supplied).
mm
12
17
inches
0.5
0.7
MHz
406 – 428 MHz
406 – 410 MHz: < 1.9
410 – 425 MHz: < 1.7
425 – 428 MHz: < 1.9
dB
0 (ref. to the quarter-wave antenna)
Ω
50
Vertical
W
50 W (at 50 °C ambient temperature)
g | lb
400 | 0.9 lb
mm
117 x 117 x 114
inches
4.6 x 4.6 x 4.5
mm
70
inches
2.8
On a conductive surface 70 x 70 cm | 27.6 x 27.6 inches min.
Material:
Radiator and base: Aluminum.
Radome: High impact plastic.
All screws and nuts: Stainless steel.
Mounting:
The drilling diameter is 12 mm except the N connector
­versions: 17 mm. A special zinc washer ensures a good
contact at the edges of the hole.
Special features:
All metall parts of this antenna are DC grounded.
Extreme robust and car-wash proof vehicular antenna.
32
370–520 MHz
Special Purpose Antenna
410–470 MHz
K813132
•Low profile broadband antenna in fiberglass radome.
Type No.
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Max. power
Radome weight
Total weight
Packing size
­(outside)
K813132
N female
410 – 470
< 1.5
0 (ref. to the quarter-wave antenna)
50
Vertical
170 (at 50° C ambient temperature)
159 | 0.4
500 | 1.1
151 x 87 x 210
5.9 x 3.4 x 8.3
MHz
dB
Ω
W
g | lb
g | lb
mm
inches
Material:
Radiator and Flange: Aluminum.
Radome: Fiberglass, colour: Light grey.
All screws and nuts: Stainless steel.
Sealing: Neoprene and rubber. Note: Don’t use
detergents that might harm the sealing.
Mounting:
On a conductive surface with a minimum size
of 50 x 50 cm | 19.7 x 19.7 inches by means of
existing M10 studs.
Grounding and
high voltage protection:
This antenna, tested by an independent institute,
is DC grounded to protect against lightning and
high-tension lines.
Mounting flange:
Dichtungsring
Sealing O-ring
nicht lackiert
not painted
56 | 2.2
13 |
0.5
28 | 1.1
32 |
1.3
80 | 3.6
145 | 5.7
43 | 1.7
nicht lackiert
not painted
115 | 4.5
All dimensions in mm | inches
Mounting hole for the connector: 33 (max. 35) mm diameter.
Note: Keep mounting surface clear of paint for electrical contact.
33
Summary – Directional Antennas
700–850 MHz
Type
Type No.
Height
[mm]
Connector female,
type and position
Page
1 x Lowband
790–960
65°
17.5dBi
0°–8°T
91121416V02
2254
7-16, rearside
37
4-Port Antenna
698–960
698–960
65°
65°
15.5dBi
15.5dBi
2°–12°T
2°–12°T
91121012
1999
4.3-10, bottom
38 +
39
4-Port Antenna
698–960
698–960
65°
65°
16.5dBi
16.5dBi
1°–10°T
1°–10°T
91121013
2438
4.3-10, bottom
40 +
41
380–470
698–791
88°
65°
13dBi
16dBi
2°T
2°T
91121959
1977
4 x 4.3-10 female
20
2-Port Antenna
790–960
1710–2690
C 65°
65°
8dBi
9dBi
0°T
0°T
91121864
334
7-16, bottom
4-Port Antenna
698–960
1695–2690
65°
65°
10.5dBi
13.5dBi
2°T
2°T
91121826
603
4.3-10, bottom
52 +
53
4-Port Antenna
790–960
1710–2690
65°
65°
15dBi
17.5dBi
0°–16°T
2°–10°T
91121775
1403
7-16, bottom
54 +
55
4-Port Antenna
790–960
1710–2690
65°
65°
16dBi
18.5dBi
0°–10°T
2°–8°T
91121776V01
1997
7-16, bottom
56+
57
4-Port Antenna
698–960
1710–2690
65°
65°
17dBi
18.5dBi
1.5°–10°T
2°–8°T
91121777V01
2622
7-16, bottom
58 +
59
6-Port Antenna
698–960
1695–2690
1695–2690
65°
65°
65°
14.5dBi
17.5dBi
18dBi
2°–16°T
2.5°–12°T
2.5°–12°T
91121975
1402
7-16, bottom
62 +
63
6-Port Antenna
698–960
1695–2690
1695–2690
65°
65°
65°
16dBi
18dBi
18dBi
2°–12°T
2.5°–12°T
2.5°–12°T
91121976
1921
7-16, bottom
64 +
65
6-Port Antenna
698–960
1695–2690
1695–2690
65°
65°
65°
17dBi
18dBi
18dBi
1°–10°T
2.5°–12°T
2.5°–12°T
91121977
2441
7-16, bottom
66 +
67
690–2690
67°
11dBi
0°T
300
7-16, bottom
36
2-Port Antenna
2 x Lowband
TETRA | 1 x Lowband
4-Port Antenna
1 x Lowband | 1 x Highband
51
1 x Lowband | 2 x Highband
690–2690 MHz
1-Port LogPer Antenna
34
853203V02
Summary – Omni Antennas
Indoor Antennas
700–850 MHz
Omni Antennas
Type No.
Connector
female
Height
[mm]
Remarks
Page
7-16
3237
42
4.3-10
540
22
N
202
Lowband
1-Port Omni Antenna
806–894
360°
11dBi
0°T
849203
0°T
92210003
0°T
91121957
Lowband | Highband
1-Port Omni
1-Port Omni Antenna
380–3800
694–960/1695–2700
360°
360°
3–8.5dBi
2dBi
indoor/outdoor
71
Indoor Antennas
Type No.
Connector
female
Height
[mm]
Page
91121993
2 x 4.3-10
399
72
700 –850 MHz
New or changed product
Directional 2-Port
2-Port Indoor Antenna
694–960/1710–2690
80°/65°
C
7dBi
1-Port Omni
380...6000
360°
1–6dBi
92210001
N female
187
27
1-Port Omni
380...6000
360°
1–6dBi
92210002
4.3-10 female
187
27
694–5920
360°
2dBi
2 x 4.3-10
∅ 320
73
Omnidirectional 1-Port
Omnidirectional 2-Port
2-Port Indoor Antenna
91121823
Abbreviations:
C: Integrated Combiner
35
1-Port LogPer Antenna
Vertical Polarization
Half-power Beam Width
690 – 2690
V
67°
1-Port LogPer Antenna 690–2690 67° 11dBi
853203V02
Type No.
Frequency range
MHz
VSWR
Gain
Impedance
dBi
Ω
Half-power beam width
horizontal
vertical
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Total power
880 – 960
960 – 1695
1695 – 2200
2200 – 2490
2490 – 2690
< 1.6
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
10.1
10.6
11.0
11.0
11.0
11.0
50
50
50
50
50
50
Vertical
Vertical
Vertical
Vertical
Vertical
Vertical
> 25
> 25
> 25
> 25
> 22
> 25
69
54
64
53
57
50
53
48
47
46
45
44
dBc
< −150
< −150
< −150
< −150
< −150
< −150
W
W
300
300
170
150
Polarization
Front-to-back ratio
690 – 880
db
°
250
200
500 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector position
Wind load
(at Rated Wind
Speed: 150 km/h)
Max. wind velocity
N | lbf
km/h
mph
Height / width / depth mm
inches
Weight
kg
lb
Packing size
mm
inches
36
1 x 7-16 female
Bottom
Frontal
20 | 4
Lateral
210 | 47
Rearside
30 | 7
241
150
300 / 155 / 785
11.8 / 6.1 / 30.9
5.5
12.1
360 x 175 x 1000
14.2 x 6.9 x 39.4
2-Port Antenna
Frequency Range
HPBW
R1
790–960
2-Port Antenna LB 2.3m 65° | 790–960 17.5dBi
91121416V02
Type No.
R1
Frequency range
MHz
Polarization
°
Average gain
dBi
Tilt
°
Horizontal Pattern:
Half-power beam width
°
Front-to-back ratio, copolar
dB
Cross polar ratio
Maindirection
0°
dB
Sector
±60°
Tracking, Avg.
dB
Squint
°
Vertical Pattern:
Half-power beam width
°
Electrical tilt
°
Sidelobe suppression for first °T
sidelobe above main beam
dB
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. effective power per port
Max. effective power for the antenna
Ω
dB
dBc
W
790 – 862
+45, −45
16.8 ... 17.0 ... 16.7
0 ... 4 ... 8
790–960
824 – 894
+45, −45
16.9 ... 17.1 ... 16.9
0 ... 4 ... 8
880 – 960
+45, −45
17.2 ... 17.4 ... 17.0
0 ... 4 ... 8
69
> 25
67
> 25
65
> 25
Typically: 25
Typically: > 10
Typically: 25
Typically: > 10
0.5
±2.5
Typically: 25
Typically: > 10
700 –850 MHz
Lowband
9.1
8.8
8.5
0 – 8, continuously adjustable
0 ... 2 ... 4 ... 8
0 ... 2 ... 4 ... 8
0 ... 2 ... 4 ... 8
18 ... 18 ... 18 ... 16
18 ... 18 ... 18 ... 16
20 ... 18 ... 17 ... 15
50
< 1.5
> 30
< −150 (2 x 43 dBm carrier)
400 (at 50 °C ambient temperature)
800 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector position
Adjustment
mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height/width/depth
mm
inches
Category of mounting hardware
Weight
kg
lb
Packing size
mm
inches
Scope of supply
For more information about additional mounting accessories please refer to page 82
2 x 7-16 female
Rearside
1x, Position bottom
continuously adjustable
Frontal:
770 | 173
Maximal:
845 | 190
200
124
2254 / 259 / 99
88.7 / 10.2 / 3.9
M (Medium)
11.5 / 13.5 (clamps incl.)
25.4 / 29.8 (clamps incl.)
2536 x 272 x 147
99.8 x 10.7 x 3.9
Panel and 2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
37
4-Port Antenna
Frequency Range
HPBW
R1
R2
698–960
698–960
65°
65°
4-Port Antenna 2LB 2.0m 65° | 2x698–960 15.5dBi
Type No.
91121012
Left side, lowband
R1, connector 1– 2
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
MHz
dBi
dBi
698 – 806
14.8
14.8 ± 0.6
791 – 862
15.4
15.4 ± 0.4
698–960
824 – 894
15.6
15.6 ± 0.2
880 – 960
15.9
15.8 ± 0.2
°
62 ± 3.9
61 ± 3.2
60 ± 2.7
60 ± 2.1
dB
> 22
> 25
> 27
> 25
dB
> 8.5
> 10.5
> 11.5
> 11.0
dB
< 1.5
< 1.0
< 1.0
< 1.5
°
11.9 ± 0.8
11.0 ± 0.8
10.5 ± 0.4
10.2 ± 0.4
°
2.0 – 12.0
°
< 0.7
< 0.7
< 0.7
< 0.7
dB
> 14
> 14
> 15
> 14
Cross Polar Isolation
dB
> 30
Port to Port Isolation
dB
> 27 (R1 // R2)
Max. Effective Power
W
400 (at 50 °C ambient temperature)
per Port
Max. Effective Power
W
800 (at 50 °C ambient temperature)
Ports R1
Values based on NGMN-P-BASTA (version 9.6) requirements.
38
For more information about additional mounting accessories please refer to page 82
4-Port Antenna
91121012
Right side, lowband
MHz
dBi
dBi
698 – 806
14.8
14.8 ± 0.6
791 – 862
15.3
15.3 ± 0.3
698–960
824 – 894
15.5
15.5 ± 0.3
880 – 960
15.8
15.7 ± 0.3
°
63 ± 3.6
62 ± 1.8
62 ± 2.1
60 ± 3.7
dB
> 22
> 24
> 26
> 27
dB
> 8.0
> 12.5
> 13.0
> 13.0
dB
< 1.5
< 1.5
< 1.0
< 2.0
°
11.6 ± 0.7
11.0 ± 0.6
10.7 ± 0.4
10.2 ± 0.5
°
2.0 – 12.0
°
< 0.7
< 0.6
< 0.6
< 0.5
dB
> 14
> 16
> 16
> 16
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Max. Effective Power
W
Ports R2
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems
Impedance
Ω
50
VSWR
< 1.5
Return Loss
dB
> 14
Interband Isolation
dB
> 27
Passive Intermodulation dBc
< −153 (2 x 43 dBm carrier)
Polarization
°
+45, –45
1200 (at 50 °C ambient
Max. Effective Power
W
­temperature)
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements.
700 –850 MHz
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
R2, connector 3 –4
> 30
> 27 (R2 // R1)
400 (at 50 °C ambient temperature)
800 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector Position
Adjustment Mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. Wind Velocity
km/h
mph
Height / Width / Depth mm
inches
Category of
Mounting ­Hardware
Weight
kg
lb
Packing Size
mm
inches
Scope of Supply
gory of
The “Cate ware”
Hard
Mounting to “XM”
e
g
n
a
h
will c
19
during 20
For more information about additional mounting accessories please refer to page 82
4 x 4.3-10 female
bottom
FlexRET,
continuously adjustable
Frontal:
1130 | 254
Maximal:
1140 | 256
241
150
1999 / 508 / 175
78.7 / 20.0 / 6.9
XH (X-Heavy)
41.0 / 46.0 (clamps incl.)
90.4 / 101.4 (clamps incl.)
2200 / 542 / 268
86.6 / 21.3 / 10.6
Panel, FlexRET and clamps
for 55–115 mm |
2.2–4.5 inches diameter
39
4-Port Antenna
Frequency Range
HPBW
R1
R2
698–960
698–960
65°
65°
4-Port Antenna 2LB 2.4m 65° | 2x698–960 16.5dBi
Type No.
91121013
Left side, lowband
R1, connector 1– 2
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
MHz
dBi
dBi
698 – 806
15.7
15.6 ± 0.4
791 – 862
16.1
16.1 ± 0.3
698–960
824 – 894
16.4
16.3 ± 0.3
880 – 960
16.5
16.4 ± 0.3
°
66 ± 2.9
65 ± 2.3
65 ± 2.6
64 ± 2.9
dB
> 23
> 23
> 24
> 25
dB
> 10.0
> 9.5
> 10.0
> 11.5
dB
< 1.5
< 1.0
< 1.0
< 1.5
°
9.7 ± 0.7
9.0 ± 0.5
8.8 ± 0.5
8.3 ± 0.4
°
1.0 – 10.0
°
< 0.4
< 0.4
< 0.4
< 0.4
dB
> 16
> 17
> 17
> 20
Cross Polar Isolation
dB
> 30
Port to Port Isolation
dB
> 27 (R1 // R2)
Max. Effective Power
W
400 (at 50 °C ambient temperature)
per Port
Max. Effective Power
W
800 (at 50 °C ambient temperature)
Ports R1
Values based on NGMN-P-BASTA (version 9.6) requirements.
40
For more information about additional mounting accessories please refer to page 82
4-Port Antenna
91121013
Right side, lowband
MHz
dBi
dBi
698 – 806
15.5
15.5 ± 0.5
791 – 862
16.0
16.0 ± 0.5
698–960
824 – 894
16.3
16.3 ± 0.4
880 – 960
16.6
16.5 ± 0.3
°
67 ± 3.5
65 ± 2.6
64 ± 3.0
63 ± 4.3
dB
> 22
> 23
> 24
> 26
dB
> 9.5
> 10.5
> 10.0
> 11.5
dB
< 0.5
< 1.0
< 0.5
< 1.5
°
9.9 ± 0.7
9.0 ± 0.7
8.6 ± 0.4
8.1 ± 0.5
°
1.0 – 10.0
°
< 0.4
< 0.4
< 0.4
< 0.3
dB
> 18
> 21
> 20
> 20
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Max. Effective Power
W
Ports R2
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems
Impedance
Ω
50
VSWR
< 1.5
Return Loss
dB
> 14
Interband Isolation
dB
> 27
Passive Intermodulation dBc
< −153 (2 x 43 dBm carrier)
Polarization
°
+45, –45
1200 (at 50 °C ambient
Max. Effective Power
W
­temperature)
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements.
700 –850 MHz
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
R2, connector 3 –4
> 30
> 27 (R2 // R1)
400 (at 50 °C ambient temperature)
800 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector Position
Adjustment Mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. Wind Velocity
km/h
mph
Height / Width / Depth mm
inches
Category of
Mounting ­Hardware
Weight
kg
lb
Packing Size
mm
inches
Scope of Supply
For more information about additional mounting accessories please refer to page 82
4 x 4.3-10 female
bottom
FlexRET,
continuously adjustable
Frontal:
1400 | 315
Maximal:
1405 | 316
241
150
2438 / 508 / 175
96.0 / 20.0 / 6.9
XH (X-Heavy)
47.0 / 52.0 (clamps incl.)
103.6 / 114.6 (clamps incl.)
2635 / 542 / 268
103.7 / 21.3 / 10.6
Panel, FlexRET and
1 unit of clamps
for 55–115 mm |
2.2–4.5 inches diameter
41
1-Port Omni Antenna
Vertical Polarization
806–894
V
1-Port Omni 806–894 360° 11dBi
849203
Type No.
MHz
806 – 894
Vertical
11
50
< 1.5
< −150 ( 2 x 43 dBm carrier)
500 (at 50 °C ambient temperature)
dBi
Ω
dBc
W
Mounting:
The antenna can be attached laterally at the
tip of a tubular mast of 50–94 mm |
2.0–3.7 inches diameter with two U-bolt brackets
­supplied with the antenna ­(connecting cable
runs outside the mast).
Material:
Radiator: Copper and brass.
Radome: Fiberglass, color: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.
Grounding
All metal parts of the antenna as well as the
inner conductor and the mounting kit are
DC grounded. The inner conductor is ­capacitively
coupled.
Lightning protection:
The antenna is designed to withstand a lightning
current of up to 150 KA (impulse: 10/350 µs),
according to IEC 62305 parts 1–4 and
VDE 0855-300, and thereby fulfils the requirements of lightning ­protection class II. Grounding
cross-section: 22 mm2 copper.
3237 mm | 127.4 inches
Frequency range
Polarization
Gain
Impedance
VSWR
Intermodulation IM3
Max. power
Mechanical specifications
150
230
um
maximtop
mast
104
42
Input
Connector position
Wind load (at Rated
Wind Speed: 150 km/h) N | lbf
Max. wind velocity
km/h
mph
Height
mm
inches
Radome diameter
mm
inches
Weight
kg
lb
Packing size
mm
inches
7-16 female
Bottom
230 | 52
180
112
3237
127.4
51
2.0
8.5
18.7
3516 x 148 x 112
138.4 x 5.8 x 4.4
Side-mounting brackets see page 83 + 84
43
Summary – Directional Antennas
2300–2600 MHz
Type
Type No.
Height
[mm]
Connector female,
type and position
Page
853203V02
300
7-16, bottom
36
690–2690 MHz
1-Port LogPer Antenna
690–2690
67°
11dBi
0°T
2-Port Antenna
1710–2690
65°
9.5dBi
0°T
91131822
155
4.3-10, bottom or top
46
2-Port Antenna
1710–2690
65°
12dBi
4°T
91121872
278
7-16, bottom
47
2-Port Antenna
1710–2690
65°
16.5dBi
0°–12°T
91121792
851
7-16, bottom
48
2-Port Antenna
1710–2690
65°
18dBi
2°–14°T
91121732V02
1452
7-16, bottom
49
2-Port Antenna
1710–2690
65°
19dBi
0°–6°T
91121762
1670
7-16, bottom
50
2-Port Antenna
790–960
1710–2690
C 65°
65°
8dBi
9dBi
0°T
0°T
91121864
334
7-16, bottom
51
4-Port Antenna
698–960
1695–2690
65°
65°
10.5dBi
13.5dBi
2°T
2°T
91121826
603
4.3-10, bottom
52 +
53
4-Port Antenna
790–960
1710–2690
65°
65°
15dBi
17.5dBi
0°–16°T
2°–10°T
91121775
1403
7-16, bottom
54 +
55
4-Port Antenna
790–960
1710–2690
65°
65°
16dBi
18.5dBi
0°–10°T
2°–8°T
91121776V01
1997
7-16, bottom
56+
57
4-Port Antenna
698–960
1710–2690
65°
65°
17dBi
18.5dBi
1.5°–10°T
2°–8°T
91121777V01
2622
7-16, bottom
58 +
59
1695–2690
1695–2690
65°
65°
18dBi
18dBi
2°–14°T
2°–14°T
91131733
1471
4.3-10, bottom
60 +
61
1695–2690
1695–2690
85°
85°
7.5dBi
7.5dBi
0°T
0°T
91121954
526
4.3-10,
bottom and top
68
6-Port Antenna
698–960
1695–2690
1695–2690
65°
65°
65°
14.5dBi
17.5dBi
18dBi
2°–16°T
2.5°–12°T
2.5°–12°T
91121975
1402
7-16, bottom
62 +
63
6-Port Antenna
698–960
1695–2690
1695–2690
65°
65°
65°
16dBi
18dBi
18dBi
2°–12°T
2.5°–12°T
2.5°–12°T
91121976
1921
7-16, bottom
64 +
65
6-Port Antenna
698–960
1695–2690
1695–2690
65°
65°
65°
17dBi
18dBi
18dBi
1°–10°T
2.5°–12°T
2.5°–12°T
91121977
2441
7-16, bottom
66 +
67
1710–2690
80°
10dBi
0°T
91131237
691
4.3-10, bottom
1 x Highband
ESLS
1 x Lowband | 1 x Highband
2 x Highband
4-Port Antenna
ESLS
2 x Highband Special Design
4-Port MicroCell
1 x Lowband | 2 x Highband
3 x Highband Special Design
6-Port Tri-Sector Slimpole
New or changed product
44
69
Summary – Omni Antennas
Indoor Antennas
2300–2600 MHz
Omni Antennas
Type No.
Connector
female
Height
[mm]
Remarks
Page
Highband
1-Port Omni Antenna
1695–2700
360°
2dBi
0°T
91121542
N
115
indoor/outdoor
70
694–960/1695–2700
360°
2dBi
0°T
91121957
N
202
indoor/outdoor
71
Lowband | Highband
1-Port Omni Antenna
Indoor Antennas
Type No.
Connector
female
Height
[mm]
Page
91121993
2 x 4.3-10
399
72
Directional 2-Port
2-Port Indoor Antenna
694–960/1710–2690
80°/65°
C
7dBi
1-Port Omni
380...6000
360°
1–6dBi
92210001
N female
187
27
1-Port Omni
380...6000
360°
1–6dBi
92210002
4.3-10 female
187
27
694–5920
360°
2dBi
2 x 4.3-10
∅ 320
73
Omnidirectional 1-Port
Omnidirectional 2-Port
91121823
2300–2600 MHz
2-Port Indoor Antenna
Abbreviations:
ESLS: Enhanced Side Lobe Suppression (above or below horizon)
C:
Integrated Combiner
45
2-Port Antenna
Frequency Range
HPBW
Y1
1710–2690
65°
2-Port Antenna HB 0.2m 65° | 1710–2690 9.5dBi
91131822
Type No.
Highband
Y1
Frequency range
MHz
Polarization
°
Gain
dBi
Horizontal Pattern:
Half-power beam width
°
Front-to-back ratio, copolar
dB
(180°±30°)
Cross polar ratio
0° dB
Cross polar ratio
dB
sector corner
±60°
Vertical Pattern:
Half-power beam width
°
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. power per input
Max. power per antenna
Ω
dB
dBc
W
W
1710 – 1990
+45, –45
8.7
1710–2690
1920 – 2200
2200 – 2490
+45, –45
+45, –45
9.2
9.6
Approx. 67
Approx. 62
Approx. 55
Approx. 53
> 24
> 24
> 22
> 22
Typically: 20
Typically: 20
Typically: 24
Typically: 24
> 10
>9
>8
>8
Approx. 66
Approx. 60
Approx. 55
Approx. 53
2490 – 2690
+45, –45
9.8
50
< 1.5
> 27
< –150 (2 x 43 dBm carrier)
100 (at 50 °C ambient temperature)
150 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector position
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height / width / depth mm
inches
Category of
mounting ­hardware
Weight
kg
lb
Packing size
mm
inches
Scope of Supply
46
2 x 4.3-10 female
Bottom or top
Frontal:
35 | 8
Maximal:
35 | 8
200
124
155 / 155 / 69
6.1 / 6.1 / 2.7
L (Light)
1.5 (tension bands incl.)
3.3 (tension bands incl.)
257 x 172 x 92
10.1 x 6.8 x 3.6
Panel and 1 unit of tension
bands for 45–125 mm |
1.8–4.9 inches diameter
For more information about additional mounting accessories please refer to page 82
2-Port Antenna
Frequency Range
HPBW
Y1
1710–2690
65°
2-Port Antenna HB 0.3m 65° | 1710–2690 12dBi
91121872
Type No.
Highband
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. power per input
MHz
°
dBi
1710 – 1990
+45, –45
11
°
dB
67
> 30
65
> 28
60
> 28
58
> 27
dB
Typically: > 20
>8
Typically: > 20
>8
Typically: > 20
>8
Typically: > 20
>8
°
°
36
3, fixed
31
3, fixed
25
4, fixed
25
4, fixed
Ω
dB
dBc
W
2490 – 2690
+45, –45
12.7
50
< 1.5
> 28
< −150 (2 x 43 dBm carrier)
150 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector position
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height/width/depth
mm
inches
Category of mounting hardware
Weight
kg
lb
Packing size
mm
inches
Scope of supply
For more information about additional mounting accessories please refer to page 82
2 x 7-16 female
Bottom
Frontal:
55 | 12
Maximal:
55 | 12
200
124
278 / 154 / 69
10.9 / 6.1 / 2.7
L (Light)
1.8 (tension bands incl.)
4.0 (tension bands incl.)
375 x 172 x 92
14.8 x 6.8 x 39.1
Panel and 1 unit of tension
bands for 45–125 mm |
1.8–4.9 inches diameter
47
2300–2600 MHz
Frequency range
Polarization
Gain
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
0°
Sector
±60°
Vertical Pattern:
Half-power beam width
Electrical tilt
Y1
1710–2690
1920 – 2200
2200 – 2490
+45, –45
+45, –45
11.5
12.2
2-Port Antenna
Frequency Range
HPBW
Y1
1710–2690
65°
2-Port Antenna HB 0.9m 65° | 1710–2690 16.5dBi
91121792
Type No.
Y1
Highband
Frequency range
MHz
Polarization
°
Gain at 0° tilt
dBi
Horizontal Pattern:
Half-power beam width
°
Front-to-back ratio (180°±30°)
dB
Cross polar ratio
0°
dB
Sector
±60°
Vertical Pattern:
Half-power beam width
°
Electrical tilt
°
Sidelobe suppression for first °T
sidelobe above main beam
dB
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. power per input
Ω
dB
dBc
W
1710 – 1990
+45, −45
15.5
1710–2690
1920 – 2200
2200 – 2490
+45, −45
+45, −45
16.3
16.7
2490 – 2690
+45, −45
16.7
67
> 25
Typically: 25
> 10
64
> 25
Typically: 28
>8
60
> 23
Typically: 28
> 11
10.8
0 ... 6 ... 12
≥ 12 ... 13 ... 15
60
> 23
Typically: 28
>8
9.9
8.8
0 – 12, continuously adjustable
0 ... 6 ... 12
0 ... 6 ... 12
≥ 13 ... 14 ... 15
≥ 13 ... 14 ... 16
8.4
0 ... 6 ... 12
≥ 15 ... 15 ... 17
50
< 1.5
> 30
< −150 (2 x 43 dBm carrier)
250 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector position
Adjustment
mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height/width/depth
mm
inches
Category of mounting hardware
Weight
kg
lb
Packing size
mm
inches
Scope of supply
48
2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
Frontal:
140 | 31
Maximal:
155 | 35
200
124
851 / 155 / 70
33.5 / 6.1 / 2.8
L (Light)
5 / 5.2 (clamps incl.)
11.0 / 11.5 (clamps incl.)
1146 x 172 x 92
45.1 x 6.8 x 3.6
Panel and 1 unit of tension
bands for 45–125 mm |
1.8–4.9 inches diameter
For more information about additional mounting accessories please refer to page 82
2-Port Antenna
Frequency Range
HPBW
Y1
1710–2690
65°
2-Port Antenna HB 1.5 m 65° | 1710–2690 18dBi ESLS
91121732V02
Type No.
Highband
Y1
Frequency range
Polarization
Gain
Tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio (180°±30°)
Cross polar ratio
0°
Sector
±60°
Tracking, Avg.
Vertical Pattern:
Half-power beam width
Electrical tilt
Sidelobe suppression
– for first sidelobe above main beam
– within 0°–20° sector above horizon
MHz
°
dBi
°
1710 – 1990
+45, −45
17.4 ... 17.6 ... 17.5
2 ... 8 ... 14
°
dB
68
> 25
Typically: 25
> 10
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. effective power per port
Max. effective power for the antenna
Ω
dB
6.7
°T
dB
dB
2 ... 8 ... 14
≥ 18 ... 18 ... 18
≥ 17 ... 17 ... 16
W
59
> 25
Typically: 25
> 10
58
> 25
Typically: 25
> 10
1.5
°°
dB
dBc
63
> 25
Typically: 24
> 10
6.0
5.3
2 – 14, continuously adjustable
2 ... 8 ... 14
2 ... 8 ... 14
≥ 18 ... 18 ... 18
≥ 18 ... 18 ... 18
≥ 17 ... 17 ... 16
≥ 17 ... 17 ... 16
5.0
2 ... 8 ... 14
≥ 18 ... 18 ... 18
≥ 17 ... 17 ... 14
50
< 1.5
> 30
< −150 (2 x 43 dBm carrier)
250 (at 50 °C ambient temperature)
500 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector position
Adjustment
mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height/width/depth
mm
inches
Category of mounting hardware
Weight
kg
lb
Packing size
mm
inches
Scope of supply
For more information about additional mounting accessories please refer to page 82
2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
Frontal:
250 | 57
Maximal:
275 | 62
200
124
1452 / 154 / 70
57.2 / 6.0 / 2.8
M (Medium)
6.5 / 8.5 (clamps incl.)
4.3 / 18.7 (clamps incl.)
1725 x 172 x 92
7.9 x 6.8 x 3.6
Panel and 2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
49
2300–2600 MHz
dB
1710–2690
1920 – 2200
2200 – 2490
2490 – 2690
+45, −45
+45, −45
+45, −45
17.9 ... 18.2 ... 18.1 18.4 ... 18.5 ... 18.5 18.5 ... 19.0 ... 18.5
2 ... 8 ... 14
2 ... 8 ... 14
2 ... 8 ... 14
2-Port Antenna
Frequency Range
HPBW
Y1
1710–2690
65°
2-Port Antenna HB 1.7m 65° | 1710–2690 19dBi
91121762
Type No.
Highband
Frequency range
Polarization
Gain at 0° tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio (180°±30°)
Cross polar ratio
0°
Sector
±60°
Tracking, Avg.
Squint
Vertical Pattern:
Half-power beam width
Electrical tilt
Sidelobe supression for first
sidelobe above main beam
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. power per input
Y1
MHz
°
dB
1710 – 1990
+45, −45
18.5
1710–2690
1920 – 2170
2170 – 2490
+45, −45
+45, −45
19.0
19.4
°
dB
67
> 28
Typically: 25
> 10
63
> 28
Typically: 25
> 10
dB
dB
°
°
°
°T
dB
Ω
dB
dBc
W
60
> 25
Typically: 25
> 10
2490 – 2690
+45, −45
19.5
58
> 25
Typically: 28
> 10
1.5
±3
5.4
0 ... 3 ... 6
≥ 18 ... 18 ... 17
4.9
4.3
0 – 6, continuously adjustable
0 ... 3 ... 6
0 ... 3 ... 6
≥ 18 ... 18 ... 16
≥ 18 ... 18 ... 16
4.0
0 ... 3 ... 6
≥ 18 ... 18 ... 17
50
< 1.5
> 30
< −150 (2 x 43 dBm carrier)
300 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector position
Adjustment
mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height/width/depth
mm
inches
Category of mounting hardware
Weight
kg
lb
Packing size
mm
inches
Scope of supply
50
2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
Frontal:
295 | 66
Maximal:
325 | 73
200
124
1670 / 155 / 70
65.7 / 6.1 / 2.8
M (Medium)
7 / 9.2 (clamps incl.)
15.4 / 20.3 (clamps incl.)
1934 x 172 x 92
76.1 x 6.8 x 3.6
Panel and 2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
For more information about additional mounting accessories please refer to page 82
2-Port Antenna
Frequency Range
HPBW
R1
Y1
790–960
1710–2690
65°
65°
2-Port Antenna LB/HB 0.3m C 65° | 790–960 8dBi | 1710–2690 9dBi
91121864
Type No.
Impedance
VSWR
Isolation: Intrasystem
Intermodulation IM3
Max. effective power
per port
Max. effective power
for the antenna
Y1
880 – 960
+45, −45
2 x 8.5
1710 – 1990
+45, −45
2 x 7.8
1710–2690
1920 – 2200
2200 – 2490
+45, −45
+45, −45
2 x 8.9
2 x 8.7
MHz
°
dBi
790 – 862
+45, −45
2 x 7.8
°
dB
Copolar: > 25
67
Copolar: > 25
Copolar: > 25
65
Copolar: > 25
55
Copolar: > 25
60
Copolar: > 25
62
Copolar: > 25
Typically: 15
>8
Typically: 18
>8
Typically: 20
>8
Typically: 25
> 10
Typically: 25
> 10
Typically: 25
> 10
Typically: 25
> 10
75
60
60
65
> 27
> 25
dB
°
65
Ω
2490 – 2690
+45, −45
2 x 8.2
50
< 1.5
dB
dBc
> 30
W
200 (at 50 °C ambient temperature)
W
> 30
< −150 dBc (2 x 43 dBm carrier)
100 (at 50 °C ambient temperature)
300 (at 50 °C ambient temperature)
790–960
–45°
1710 –2690
–45°
790 –960
+45°
1710–2690
+45°
C
C
7-16
7-16
2300–2600 MHz
Frequency range
Polarization
Average gain (dBi)
Horizontal Pattern:
Half-power beam width
Front-to-back ratio
Cross polar ratio
Maindirection
0°
Sector
±60°
Vertical Pattern:
Half-power beam width
R1
790–960
824 – 894
+45, −45
2 x 8.0
Mechanical specifications
Input
Connector position
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height / width / depth mm
inches
Category of
mounting ­hardware
Weight
kg
lb
Packing size
mm
inches
Scope of Supply
For more information about additional mounting accessories please refer to page 82
2 x 7-16 female
Bottom
Frontal:
100 | 22
Maximal:
110 | 25
200
124
334 / 260 / 136
13.1 / 10.2 / 5.4
L (Light)
2.8 (tension bands incl.)
6.2 (tension bands incl.)
495 x 272 x 157
19.5 x 10.7 x 6.2
Panel and 1 unit of tension
bands for 45–125 mm |
1.8–4.9 inches diameter
51
4-Port Antenna
Frequency Range
HPBW
R1
Y1
698–960
1695–2690
65°
65°
4-Port Antenna LB/HB 0.6m 65° | 698–960 10.5dBi | 1695–2690 13.5dBi
Type No.
91121826
Lowband
R1, connector 1–2
Frequency range
Polarization
Average gain
Horizontal Pattern:
Half-power beam width
Front-to-back ratio
Total power, ± 30°
Cross polar ratio
Maindirection
Sector
Vertical Pattern:
Half-power beam width
Electrical tilt
Impedance
VSWR
Isolation: Intrasystem
Isolation: Intersystem
Intermodulation IM3
Max. effective power per port
Max. effective power for the
antenna
52
0°
±60°
MHz
°
dBi
698 – 824 MHz
+45, −45
10.1
698–960
824 – 894 MHz
+45, −45
10.6
880 – 960 MHz
+45, −45
10.7
°
70
69
69
dB
> 23
> 25
> 25
dB
Typically: 25
>8
Typically: 28
> 10
Typically: 28
> 10
°
°
40
36
2, fixed
35
Ω
dB
dB
dBc
W
> 27, typ. > 30
50
< 1.5
> 30
> 26, typ. > 30 (R1 // Y1)
< −153 (2 x 43 dBm carrier)
250 (at 50 °C ambient temperature)
400 (at 50 °C ambient temperature)
> 28, typ. > 30
For more information about additional mounting accessories please refer to page 82
4-Port Antenna
91121826
Highband
0°
±60°
MHz
°
dBi
1695 – 1880
+45, −45
13.1
1850 – 1990
+45, −45
13.7
1695–2690
1920 – 2180
+45, −45
13.7
2200 – 2490
+45, −45
13.8
2490 – 2690
+45, −45
13.6
°
62
55
55
55
68
dB
> 26
> 27
> 27
> 27
> 25
dB
Typically: 25
> 10
> 28
> 10
28
> 10
25
> 10
28
> 10
°
°
17.6
16.7
15.9
2, fixed
14.5
12.4
Impedance
VSWR
Isolation: Intrasystem
Isolation: Intersystem
Intermodulation IM3
Max. effective power per port
Max. effective power for the
antenna
Ω
50
< 1.5
dB
dB
dBc
W
> 30 (Y1 // R1)
< −153 (2 x 43 dBm carrier)
200 (at 50 °C ambient temperature)
400 (at 50 °C ambient temperature)
Total power for the antenna
W
800 (at 50 °C ambient temperature)
> 26, typ. > 31
> 30, typ. > 31
Mechanical specifications
Input
Connector position
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height/width/depth
mm
inches
Category of mounting hardware
Weight
kg
lb
Packing size
mm
inches
Scope of supply
For more information about additional mounting accessories please refer to page 82
4 x 4.3-10 female
Bottom
Frontal:
110 | 25
Maximal:
170 | 38
241
150
603 / 300 / 152
23.7 / 11.8 / 6.0
M (Medium)
8.5 / 10.7 (clamps incl.)
18.7 / 23.6 (clamps incl.)
845 x 325 x 193
33.3 x 12.8 x 7.6
Panel and 2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
53
2300–2600 MHz
Frequency range
Polarization
Average gain
Horizontal Pattern:
Half-power beam width
Front-to-back ratio
Total power, ± 30°
Cross polar ratio
Maindirection
Sector
Vertical Pattern:
Half-power beam width
Electrical tilt
Y1, connector 3– 4
4-Port Antenna
Frequency Range
HPBW
R1
Y1
790–960
1710–2690
65°
65°
4-Port Antenna LB/HB 1.4m 65° | 790–960 15dBi | 1710–2690 17.5dBi
Type No.
91121775
Lowband
R1, connector 1–2
Frequency range
Polarization
Average gain
Tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar (180°±30°)
Cross polar ratio
Maindirection
0°
Sector
±60°
Horizontal Pattern:
Half-power beam width
Electrical tilt
Sidelobe suppression for first sidelobe
above main beam
Impedance
VSWR
Isolation: Intrasystem
Isolation: Intersystem
Intermodulation IM3
Max. effective power per port
Max. effective power for the antenna
54
MHz
°
dBi
°
790 – 862
+45, −45
14.5 ... 14.4 ... 14.2
0 ... 8 ... 16
790–960
824 – 894
+45, −45
14.6 ... 14.5 ... 14.3
0 ... 8 ... 16
880 – 960
+45, −45
14.8 ... 14.6 ... 14.4
0 ... 8 ... 16
°
dB
69
> 25
68
> 25
67°
> 25
dB
Typically: 25
> 10
Typically: 25
>9
Typically: 25
>8
°
°
°T
dB
16.5
16.0
0–16, continuously adjustable
0 ... 8 ... 16
16 ... 15 ... 15
15.5
Ω
dB
dB
dBc
W
0 ... 8 ... 16
16 ... 15 ... 15
0 ... 8 ... 16
15 ... 15 ... 14
50
< 1.5
> 30
> 30 (698–960 // 1710–2690 MHz)
< −150 (2 x 43 dBm carrier)
300 (at 50 °C ambient temperature)
600 (at 50 °C ambient temperature)
For more information about additional mounting accessories please refer to page 82
4-Port Antenna
91121775
Frequency range
Polarization
Average gain
Tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio, copolar (180°±30°)
Cross polar ratio
Maindirection
0°
Sector
±60°
Horizontal Pattern:
Half-power beam width
Electrical tilt
Sidelobe suppression for first sidelobe
above main beam
Impedance
VSWR
Isolation: Intrasystem
Isolation: Intersystem
Intermodulation IM3
Max. effective power per port
Max. effective power for the antenna
Y1, connector 3– 4
MHz
°
dBi
°
1710 – 1880
+45, −45
17.2 ... 17.3 ... 16.8
2 ... 6 ... 10
1850 – 1990
+45, −45
17.4 ... 17.4 ... 16.9
2 ... 6 ... 10
1710–2690
1920 – 2170
+45, −45
17.6 ... 17.7 ... 17.0
2 ... 6 ... 10
2300 – 2400
+45, −45
17.0 ... 16.8 ... 16.0
2 ... 6 ... 10
2490 – 2690
+45, −45
17.2 ... 17.3 ... 16.7
2 ... 6 ... 10
°
dB
dB
63
> 25
64
> 28
66
> 29
73
> 26
65
> 25
Typically: 18
>9
> 20
> 10
20
> 10
23
> 10
23
>8
6.2
5.8
5.4
4.8
2 ... 6 ... 10
14 ... 15 ... 16
2 ... 6 ... 10
14 ... 15 ... 17
5.6
2–10, continuously adjustable
2 ... 6 ... 10
15 ... 16 ... 17
2 ... 6 ... 10
17 ... 18 ... 18
2 ... 6 ... 10
15 ... 17 ... 18
°
°
°T
dB
Ω
50
< 1.5
dB
dB
dBc
W
> 28
> 30 (790–960 // 1710–2690 MHz)
< −150 (2 x 43 dBm carrier)
200 (at 50 °C ambient temperature)
400 (at 50 °C ambient temperature)
> 30
2300–2600 MHz
Highband
Mechanical specifications
Input
Connector position
Adjustment mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. wind velocity
km/h
mph
Height / width / depth mm
inches
Category of
mounting ­hardware
Weight
kg
lb
Packing size
mm
inches
Scope of supply
For more information about additional mounting accessories please refer to page 82
4 x 7-16 female (long neck)
Bottom
2 x, Position bottom
continuously adjustable
Frontal:
260 | 58
Maximal:
415 | 93
200
124
1403 / 300 / 152
55.2 / 11.8 / 6.0
M (Medium)
18 / 20 (clamps incl.)
39.7 / 44.1 (clamps incl.)
1726 x 322 x 190
68.0 x 12.7 x 7.5
Panel and 2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
55
4-Port Antenna
Frequency Range
HPBW
R1
Y1
790–960
1710–2690
65°
65°
4-Port Antenna LB/HB 2.0m 65° | 790–960 16dBi | 1710–2690 18.5dBi
Type No.
91121776V01
Lowband
R1, connector 1– 2
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
MHz
dBi
dBi
790 – 862
16.1
15.9 ± 0.3
790–960
824 – 894
16.2
16.1 ± 0.2
880 – 960
16.2
16.1 ± 0.3
°
69 ± 0.9
68 ± 1.2
67 ± 0.6
dB
> 23
> 25
> 26
dB
> 23
> 23
> 20
dB
> 9.5
> 10.0
> 11.0
°
10.1 ± 0.4
9.9 ± 0.3
9.5 ± 0.4
°
0.0 – 10.0
°
< 0.5
< 0.5
< 0.6
dB
> 16
> 18
> 16
dB
> 16
> 18
> 16
Cross Polar Isolation
dB
> 30
Port to Port Isolation
dB
> 30 (R1 // Y1)
Max. Effective Power
W
400 (at 50 °C ambient temperature)
per Port
Max. Effective Power
W
800 (at 50 °C ambient temperature)
Ports R1
Values based on NGMN-P-BASTA (version 9.6) requirements.
56
For more information about additional mounting accessories please refer to page 82
4-Port Antenna
91121776V01
Highband
MHz
dBi
dBi
1710 – 1880
18.2
18.1 ± 0.5
1850 – 1990
18.5
18.4 ± 0.2
1710–2690
1920 – 2170
18.8
18.7 ± 0.5
2300 – 2400
18.8
18.7 ± 0.6
2490 – 2690
18.7
18.5 ± 0.3
°
64 ± 5.4
63 ± 2.7
61 ± 3.6
62 ± 5.7
64 ± 3.4
dB
> 25
> 26
> 27
> 26
> 25
dB
> 14
> 19
> 20
> 18
> 20
dB
> 8.0
> 9.5
> 10.0
> 10.0
> 11.5
°
5.0 ± 0.3
4.7 ± 0.2
4.4 ± 0.3
3.8 ± 0.2
3.5 ± 0.2
°
2.0 – 8.0
°
< 0.2
< 0.2
< 0.3
< 0.2
< 0.3
dB
> 17
> 18
> 19
> 20
> 20
dB
> 15
> 16
> 16
> 15
> 17
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Max. Effective Power
W
Ports Y1
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems
Impedance
Ω
50
VSWR
< 1.5
Return Loss
dB
> 14
Interband Isolation
dB
> 30
Passive Intermodulation dBc
< −150 (2 x 43 dBm carrier)
Polarization
°
+45, –45
900 (at 50 °C ambient
Max. Effective Power
W
­temperature)
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements.
> 28
> 30 (R1 // Y1)
200 (at 50 °C ambient temperature)
400 (at 50 °C ambient temperature)
2300–2600 MHz
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y1, connector 3 – 4
Mechanical specifications
Input
Connector Position
Adjustment Mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. Wind Velocity
km/h
mph
Height / Width / Depth mm
inches
Category of
Mounting ­Hardware
Weight
kg
lb
Packing Size
mm
inches
Scope of Supply
For more information about additional mounting accessories please refer to page 82
4 x 7-16 female long neck
bottom
2x, Position bottom
­continuously adjustable
Frontal:
390 | 88
Maximal:
620 | 139
200
124
1997 / 300 / 152
78.6 / 11.8 / 6.0
M (Medium)
24.0 / 26.2 (clamps incl.)
52.9 / 57.8 (clamps incl.)
2316 / 322 / 190
91.2 / 12.7 / 7.5
Panel and 2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
57
4-Port Antenna
Frequency Range
HPBW
R1
Y1
698–960
1710–2690
65°
65°
4-Port Antenna LB/HB 2.6m 65° | 698–960 17dBi | 1710–2690 18.5dBi
Type No.
91121777V01
Lowband
R1, connector 1– 2
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
MHz
dBi
dBi
698 – 806
16.0
16.0 ± 0.5
790 – 862
16.6
16.5 ± 0.4
698–960
824 – 894
16.9
16.8 ± 0.4
880 – 960
17.1
17.0 ± 0.2
°
71 ± 2.2
68 ± 1.0
68 ± 0.9
67 ± 1.5
dB
> 22
> 24
> 26
> 27
dB
> 23
> 22
> 22
> 21
dB
> 8.0
> 8.5
> 9.5
> 8.5
°
8.4 ± 0.7
7.7 ± 0.4
7.5 ± 0.4
7.0 ± 0.3
°
1.5 – 10.0
°
< 0.3
< 0.3
< 0.3
< 0.3
dB
> 16
> 17
> 16
> 15
dB
> 16
> 17
> 16
> 15
Cross Polar Isolation
dB
> 30
Port to Port Isolation
dB
> 30 (R1 // Y1)
Max. Effective Power
W
400 (at 50 °C ambient temperature)
per Port
Max. Effective Power
W
800 (at 50 °C ambient temperature)
Ports R1
Values based on NGMN-P-BASTA (version 9.6) requirements.
58
For more information about additional mounting accessories please refer to page 82
4-Port Antenna
91121777V01
Highband
MHz
dBi
dBi
1710 – 1880
18.0
18.0 ± 0.4
1850 – 1990
18.5
18.5 ± 0.4
1710–2690
1920 – 2170
18.8
18.7 ± 0.4
2300 – 2400
18.6
18.5 ± 0.7
2490 – 2690
19.0
18.8 ± 0.4
°
64 ± 3.4
62 ± 2.9
62 ± 2.2
60 ± 4.8
60 ± 2.0
dB
> 25
> 26
> 27
> 25
> 26
dB
> 15
> 18
> 20
> 16
> 21
dB
> 8.0
> 11.0
> 11.0
> 10.0
> 9.5
°
5.0 ± 0.4
4.7 ± 0.2
4.4 ± 0.4
3.9 ± 0.2
3.5 ± 0.2
°
2.0 – 8.0
°
< 0.2
< 0.2
< 0.2
< 0.2
< 0.2
dB
> 19
> 18
> 20
> 20
> 18
dB
> 16
> 16
> 16
> 16
> 17
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Max. Effective Power
W
Ports Y1
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems
Impedance
Ω
50
VSWR
< 1.5
Return Loss
dB
> 14
Interband Isolation
dB
> 30
Passive Intermodulation dBc
< −150 (2 x 43 dBm carrier)
Polarization
°
+45, –45
900 (at 50 °C ambient
Max. Effective Power
W
­temperature)
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements.
> 28
> 30 (R1 // Y1)
200 (at 50 °C ambient temperature)
400 (at 50 °C ambient temperature)
2300–2600 MHz
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y1, connector 3 – 4
Mechanical specifications
Input
Connector Position
Adjustment Mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. Wind Velocity
km/h
mph
Height / Width / Depth mm
inches
Category of
Mounting ­Hardware
Weight
kg
lb
Packing Size
mm
inches
Scope of Supply
For more information about additional mounting accessories please refer to page 82
4 x 7-16 female long neck
bottom
2x, Position bottom
­continuously adjustable
Frontal:
530 | 119
Maximal:
845 | 190
200
124
2622 / 300 / 152
103.2 / 11.8 / 6.0
H (Heavy)
29.0 / 31.2 (clamps incl.)
63.9 / 68.8 (clamps incl.)
2951 / 322 / 190
116.2 / 12.7 / 7.5
Panel and 2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
59
4-Port Antenna
Frequency Range
HPBW
Y1
Y2
1695–2690 1695–2690
65°
65°
4-Port Antenna 2HB 1.5m 65° | 2x1695–2690 18dBi ESLS
Type No.
91131733
Left side, highband
Y1, connector 1– 2
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
MHz
dBi
dBi
1695 – 1880
17.4
17.3 ± 0.4
1695–2690
1920 – 2180
2300 – 2400
18.0
18.6
17.9 ± 0.4
18.3 ± 0.4
2490 – 2690
18.8
18.6 ± 0.4
°
66 ± 3.2
63 ± 2.6
60 ± 3.5
56 ± 2.6
dB
> 24
> 24
> 26
> 23
dB
> 22
> 22
> 22
> 18
dB
> 12.5
> 10.0
> 9.5
> 13.0
°
6.8 ± 0.5
6.1 ± 0.5
5.2 ± 0.3
4.9 ± 0.3
°
2.0 – 14.0
°
< 0.3
< 0.3
< 0.2
< 0.2
dB
> 20
> 20
> 20
> 20
dB
> 17
> 17
> 16
> 16
Cross Polar Isolation
dB
> 30
Port to Port Isolation
dB
> 30 (Y1 // Y2)
Max. Effective Power
W
250 (at 50 °C ambient temperature)
per Port
Max. Effective Power
W
500 (at 50 °C ambient temperature)
Ports Y1
Values based on NGMN-P-BASTA (version 9.6) requirements.
60
For more information about additional mounting accessories please refer to page 82
4-Port Antenna
91131733
Right side, highband
MHz
dBi
dBi
1695 – 1880
17.2
17.1 ± 0.4
1920 – 2180
17.9
17.8 ± 0.5
1695–2690
2300 – 2400
18.6
18.4 ± 0.4
2490 – 2690
18.9
18.7 ± 0.5
°
68 ± 3.8
64 ± 4.1
59 ± 2.6
55 ± 2.0
dB
> 25
> 26
> 25
> 23
dB
> 22
> 22
> 22
> 19
dB
> 13.5
> 11.0
> 9.5
> 12.0
°
6.8 ± 0.4
6.0 ± 0.5
5.2 ± 0.3
4.8 ± 0.2
°
2.0 – 14.0
°
< 0.3
< 0.3
< 0.2
< 0.2
dB
> 19
> 19
> 20
> 20
dB
> 18
> 17
> 17
> 15
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Max. Effective Power
W
Ports Y2
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems
Impedance
Ω
50
VSWR
< 1.5
Return Loss
dB
> 14
Interband Isolation
dB
> 30
Passive Intermodulation dBc
< −153 (2 x 43 dBm carrier)
Polarization
°
–45, +45
700 (at 50 °C ambient
Max. Effective Power
W
­temperature)
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements.
> 30
> 30 (Y2 // Y1)
250 (at 50 °C ambient temperature)
500 (at 50 °C ambient temperature)
2300–2600 MHz
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y2, connector 3 – 4
Mechanical specifications
Input
Connector Position
Adjustment Mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. Wind Velocity
km/h
mph
Height / Width / Depth mm
inches
Category of
Mounting ­Hardware
Weight
kg
lb
Packing Size
mm
inches
Scope of Supply
For more information about additional mounting accessories please refer to page 82
4 x 4.3-10 female
bottom
2x, Position bottom
­continuously adjustable
Frontal:
565 | 127
Maximal:
620 | 139
200
124
1471 / 275 / 86
57.9 / 10.8 / 3.4
M (Medium)
13.0 / 15.2 (clamps incl.)
28.7 / 33.5 (clamps incl.)
1791 / 298 / 119
70.5 / 11.7 / 4.7
Panel and 2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
61
6-Port Antenna
Frequency Range
HPBW
R1
Y1
698–960
Y2
1695–2690 1695–2690
65°
65°
65°
6-Port Antenna LB/2HB 1.4m 6
5° | 698–960 14.5dBi | 2x1695–2690 18dBi
Type No.
91121975
Left side, lowband
R1, connector 1– 2
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
MHz
dBi
dBi
698 – 806
13.5
13.5 ± 0.3
790 – 862
14.0
14.0 ± 0.4
698–960
824 – 894
14.2
14.2 ± 0.3
880 – 960
14.5
14.4 ± 0.3
°
72 ± 3.2
70 ± 2.7
68 ± 2.4
67 ± 2.2
dB
> 22
> 24
> 24
> 25
dB
> 23
> 23
> 24
> 22
dB
> 7.0
> 7.0
> 7.0
> 7.5
dB
< 2.0
< 1.5
< 2.0
< 2.5
°
17.4 ± 1.1
16.2 ± 1.1
15.7 ± 0.7
14.9 ± 0.8
°
2.0 – 16.0
°
< 0.6
< 0.8
< 0.6
< 0.5
dB
> 15
> 16
> 16
> 19
dB
> 22
> 20
> 20
> 20
Cross Polar Isolation
dB
> 30
Port to Port Isolation
dB
> 30 (R1 // Y1, Y2)
Max. Effective Power
W
300 (at 50 °C ambient temperature)
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
Left side, highband
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y1, connector 3 – 4
MHz
dBi
dBi
1695 – 1880
17.3
17.2 ± 0.6
1850 – 1990
17.5
17.5 ± 0.3
1695–2690
1920 – 2180
17.6
17.5 ± 0.3
2300 – 2400
17.2
17.1 ± 0.4
2500 – 2690
17.6
17.5 ± 0.6
°
62 ± 3.9
61 ± 3.0
62 ± 3.3
66 ± 6.8
64 ± 5.8
dB
> 24
> 28
> 26
> 24
> 24
dB
> 16
> 20
> 23
> 18
> 15
dB
> 7.0
> 9.0
> 10.5
> 8.5
> 9.5
dB
< 1.5
< 2.5
< 2.5
< 2.0
< 2.0
°
6.7 ± 0.4
6.3 ± 0.3
6.0 ± 0.5
5.3 ± 0.2
4.8 ± 0.3
°
2.5 – 12.0
°
< 0.3
< 0.2
< 0.2
< 0.2
< 0.2
dB
> 17
> 17
> 18
> 19
> 15
dB
> 14
> 14
> 14
> 14
> 14
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
62
> 28
> 30 (Y1 // R1, Y2)
200 (at 50 °C ambient temperature)
For more information about additional mounting accessories please refer to page 82
6-Port Antenna
91121975
Right side, highband
MHz
dBi
dBi
1695 – 1880
17.2
17.2 ± 0.4
1850 – 1990
17.5
17.4 ± 0.3
1695–2690
1920 – 2180
17.8
17.7 ± 0.4
2300 – 2400
18.2
18.1 ± 0.3
2500 – 2690
18.3
18.1 ± 0.4
°
65 ± 2.4
63 ± 3.2
63 ± 2.9
61 ± 2.0
61 ± 2.5
dB
> 24
> 23
> 23
> 24
> 25
dB
> 22
> 24
> 24
> 20
> 18
dB
> 15.5
> 15.0
> 13.0
> 7.5
> 9.5
dB
< 1.0
< 1.0
< 1.0
< 1.5
< 2.0
°
7.1 ± 0.4
6.7 ± 0.4
6.4 ± 0.4
5.5 ± 0.3
5.0 ± 0.3
°
2.5 – 12.0
°
< 0.2
< 0.2
< 0.2
< 0.3
< 0.2
dB
> 21
> 21
> 22
> 18
> 19
dB
> 14
> 15
> 15
> 15
> 16
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems
Impedance
Ω
50
VSWR
< 1.5
Return Loss
dB
> 14
Interband Isolation
dB
> 30
Passive Intermodulation dBc
< −150 (2 x 43 dBm carrier)
Polarization
°
+45, –45
900 (at 50 °C ambient
Max. Effective Power
W
­temperature)
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements.
> 28
> 30 (Y2 // R1, Y1)
200 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector Position
Adjustment Mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. Wind Velocity
km/h
mph
Height / Width / Depth mm
inches
Category of
Mounting ­Hardware
Weight
kg
lb
Packing Size
mm
inches
Scope of Supply
For more information about additional mounting accessories please refer to page 82
2300–2600 MHz
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y2, connector 5 – 6
6 x 7-16 female
bottom
FlexRET,
continuously adjustable
Frontal:
450 | 101
Maximal:
520 | 117
241
150
1402 / 377 / 169
55.2 / 14.8 / 6.7
H (Heavy)
25.0 / 27.2 (clamps incl.)
55.1 / 59.9 (clamps incl.)
1602 / 397 / 212
63.1 / 15.6 / 8.3
Panel, FlexRET and
2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
63
6-Port Antenna
Frequency Range
HPBW
R1
Y1
698–960
Y2
1695–2690 1695–2690
65°
65°
65°
6-Port Antenna LB/2HB 1.9m 6
5° | 698–960 16dBi | 2x1695–2690 18dBi
Type No.
91121976
Left side, lowband
R1, connector 1– 2
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
MHz
dBi
dBi
698 – 806
15.2
15.2 ± 0.5
790 – 862
15.7
15.6 ± 0.3
698–960
824 – 894
15.9
15.8 ± 0.4
880 – 960
16.2
16.1 ± 0.3
°
69 ± 2.3
68 ± 2.1
67 ± 2.0
67 ± 1.4
dB
> 23
> 25
> 26
> 26
dB
> 23
> 22
> 23
> 22
dB
> 8.0
> 8.0
> 9.0
> 8.0
dB
< 2.0
< 2.0
< 2.0
< 2.0
°
10.8 ± 1.1
9.8 ± 0.4
9.5 ± 0.6
8.9 ± 0.4
°
2.0 – 12.0
°
< 0.5
< 0.5
< 0.4
< 0.5
dB
> 14
> 16
> 16
> 15
dB
> 15
> 16
> 17
> 16
Cross Polar Isolation
dB
> 30
Port to Port Isolation
dB
> 30 (R1 // Y1 ,Y2)
Max. Effective Power
W
400 (at 50 °C ambient temperature)
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
Left side, highband
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y1, connector 3 – 4
MHz
dBi
dBi
1695 – 1880
17.3
17.2 ± 0.5
1850 – 1990
17.7
17.6 ± 0.3
1695–2690
1920 – 2180
17.9
17.7 ± 0.3
2300 – 2400
17.6
17.5 ± 0.5
2500 – 2690
18.1
17.9 ± 0.6
°
65 ± 4.2
62 ± 2.6
61 ± 2.4
63 ± 6.1
66 ± 6.8
dB
> 26
> 27
> 26
> 23
> 23
dB
> 16
> 20
> 24
> 18
> 15
dB
> 7.5
> 8.5
> 10.5
> 8.5
> 9.0
dB
< 2.5
< 2.5
< 2.0
< 2.5
< 2.0
°
6.3 ± 0.4
5.9 ± 0.3
5.6 ± 0.4
4.9 ± 0.2
4.4 ± 0.3
°
2.5 – 12.0
°
< 0.2
< 0.2
< 0.2
< 0.1
< 0.1
dB
> 19
> 17
> 17
> 16
> 16
dB
> 14
> 14
> 13
> 13
> 14
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
64
> 28
> 30 (Y1 // R1, Y2)
200 (at 50 °C ambient temperature)
For more information about additional mounting accessories please refer to page 82
6-Port Antenna
91121976
Right side, highband
MHz
dBi
dBi
1695 – 1880
17.3
17.3 ± 0.3
1850 – 1990
17.5
17.5 ± 0.3
1695–2690
1920 – 2180
17.8
17.8 ± 0.4
2300 – 2400
18.2
18.1 ± 0.3
2500 – 2690
18.1
17.9 ± 0.6
°
65 ± 2.9
66 ± 2.8
66 ± 2.6
65 ± 1.8
68 ± 4.8
dB
> 22
> 24
> 24
> 25
> 26
dB
> 15
> 19
> 18
> 17
> 19
dB
> 10.5
> 15.0
> 14.5
> 10.0
> 10.0
dB
< 1.0
< 1.0
< 1.0
< 0.5
< 2.5
°
7.1 ± 0.4
6.7 ± 0.3
6.3 ± 0.5
5.6 ± 0.3
5.0 ± 0.3
°
2.5 – 12.0
°
< 0.3
< 0.3
< 0.3
< 0.3
< 0.3
dB
> 19
> 25
> 25
> 19
> 21
dB
> 13
> 15
> 17
> 17
> 15
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems
Impedance
Ω
50
VSWR
< 1.5
Return Loss
dB
> 14
Interband Isolation
dB
> 30
Passive Intermodulation dBc
< −150 (2 x 43 dBm carrier)
Polarization
°
+45, –45
900 (at 50 °C ambient
Max. Effective Power
W
­temperature)
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements.
> 28
> 30 (Y2 // R1, Y1)
200 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector Position
Adjustment Mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. Wind Velocity
km/h
mph
Height / Width / Depth mm
inches
Category of
Mounting ­Hardware
Weight
kg
lb
Packing Size
mm
inches
Scope of Supply
For more information about additional mounting accessories please refer to page 82
2300–2600 MHz
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y2, connector 5 – 6
6 x 7-16 female
bottom
FlexRET,
continuously adjustable
Frontal:
630 | 142
Maximal:
730 | 164
241
150
1921 / 377 / 169
75.6 / 14.8 / 6.7
H (Heavy)
30.0 / 32.2 (clamps incl.)
66.1 / 70.9 (clamps incl.)
2121 / 397 / 212
83.5 / 15.6 / 8.3
Panel, FlexRET and
2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
65
6-Port Antenna
Frequency Range
HPBW
R1
Y1
698–960
Y2
1710–2690 1710–2690
65°
65°
65°
6-Port Antenna LB/2HB 2.4m 6
5° | 698–960 17dBi | 2x1695–2690 18dBi
Type No.
91121977
Left side, lowband
R1, connector 1– 2
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
MHz
dBi
dBi
698 – 820
16.3
16.2 ± 0.5
790 – 862
16.8
16.8 ± 0.4
698–960
824 – 894
17.0
17.0 ± 0.3
880 – 960
17.3
17.3 ± 0.2
°
67 ± 2.4
65 ± 1.4
65 ± 0.9
64 ± 1.3
dB
> 21
> 24
> 26
> 27
dB
> 24
> 25
> 25
> 26
dB
> 6.5
> 7.0
> 9.0
> 10.0
dB
< 2.0
< 2.5
< 2.0
< 2.0
°
8.7 ± 0.7
7.9 ± 0.5
7.6 ± 0.4
7.2 ± 0.4
°
1.0 – 10.0
°
< 0.3
< 0.4
< 0.4
< 0.4
dB
> 17
> 17
> 17
> 18
dB
> 16
> 15
> 15
> 16
Cross Polar Isolation
dB
> 30
Port to Port Isolation
dB
> 30 (R1 // Y1 ,Y2)
Max. Effective Power
W
400 (at 50 °C ambient temperature)
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
Left side, highband
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y1, connector 3 – 4
MHz
dBi
dBi
1695 – 1880
17.4
17.3 ± 0.5
1850 – 1990
17.9
17.8 ± 0.3
1695–2690
1920 – 2180
17.9
17.8 ± 0.3
2300 – 2400
17.3
17.2 ± 0.2
2490 – 2690
18.1
17.9 ± 0.7
°
65 ± 4.5
62 ± 3.0
62 ± 2.6
69 ± 4.9
63 ± 6.4
dB
> 25
> 25
> 25
> 24
> 23
dB
> 16
> 22
> 24
> 19
> 16
dB
> 8.5
> 10.5
> 11.0
> 8.5
> 7.5
dB
< 1.5
< 2.5
< 2.0
< 1.5
< 2.5
°
6.3 ± 0.4
5.9 ± 0.2
5.6 ± 0.4
4.9 ± 0.1
4.5 ± 0.3
°
2.5 – 12.0
°
< 0.5
< 0.4
< 0.4
< 0.3
< 0.3
dB
> 19
> 18
> 17
> 16
> 18
dB
> 13
> 14
> 13
> 14
> 15
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
66
> 28
> 30 (Y1 // R1, Y2)
200 (at 50 °C ambient temperature)
For more information about additional mounting accessories please refer to page 82
6-Port Antenna
91121977
Right side, highband
MHz
dBi
dBi
1695 – 1880
17.4
17.4 ± 0.3
1850 – 1990
17.7
17.6 ± 0.3
1695–2690
1920 – 2180
18.0
17.9 ± 0.5
2300 – 2400
18.4
18.3 ± 0.3
2490 – 2690
18.6
18.4 ± 0.5
°
62 ± 2.3
62 ± 2.0
61 ± 1.9
60 ± 1.7
58 ± 3.6
dB
> 24
> 25
> 25
> 25
> 23
dB
> 22
> 23
> 21
> 16
> 16
dB
> 16.0
> 16.0
> 13.0
> 8.0
> 7.5
dB
< 1.5
< 1.0
< 1.0
< 1.5
< 2.0
°
7.1 ± 0.4
6.6 ± 0.3
6.3 ± 0.4
5.6 ± 0.4
5.0 ± 0.3
°
2.5 – 12.0
°
< 0.2
< 0.3
< 0.3
< 0.4
< 0.2
dB
> 21
> 24
> 23
> 19
> 23
dB
> 14
> 15
> 15
> 15
> 17
Cross Polar Isolation
dB
Port to Port Isolation
dB
Max. Effective Power
W
per Port
Values based on NGMN-P-BASTA (version 9.6) requirements.
Electrical specifications, all systems
Impedance
Ω
50
VSWR
< 1.5
Return Loss
dB
> 14
Interband Isolation
dB
> 30
Passive Intermodulation dBc
< −150 (2 x 43 dBm carrier)
Polarization
°
+45, –45
900 (at 50 °C ambient
Max. Effective Power
W
­temperature)
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements.
> 28
> 30 (Y2 // R1, Y1)
200 (at 50 °C ambient temperature)
Mechanical specifications
Input
Connector Position
Adjustment Mechanism
Wind load (at Rated
N | lbf
Wind Speed: 150 km/h)
Max. Wind Velocity
km/h
mph
Height / Width / Depth mm
inches
Category of
Mounting ­Hardware
Weight
kg
lb
Packing Size
mm
inches
Scope of Supply
For more information about additional mounting accessories please refer to page 82
2300–2600 MHz
Frequency Range
Gain at mid Tilt
Gain over all Tilts
Horizontal Pattern:
Azimuth Beamwidth
Front-to-Back Ratio,
Total Power, ± 30°
Cross Polar Discrimination
at Boresight
Cross Polar Discrimination
over Sector
Azimuth Beam
Port-to-Port Tracking
Vertical Pattern:
Elevation Beamwidth
Electrical Downtilt
continuously adjustable
Tilt Accuracy
First Upper Side Lobe
­Suppression
Upper Side Lobe
­Suppression, 20° Sector
­above Main Beam
Y2, connector 5 – 6
6 x 7-16 female
bottom
FlexRET,
continuously adjustable
Frontal:
830 | 187
Maximal:
960 | 216
200
124
2441 / 377 / 169
96.1 / 14.8 / 6.7
H (Heavy)
35.0 / 37.2 (clamps incl.)
77.1 / 81.9 (clamps incl.)
2641 / 397 / 212
104.0 / 15.6 / 8.3
Panel, FlexRET and
2 units of clamps
for 42–115 mm |
1.7–4.5 inches diameter
67
4-Port Micro Cell Antenna
Dual Polarization
HPBW
1695–2690 1695–2690
X
X
85°
85°
Antenna in upright
pole installation
4-Port Micro Cell Antenna 2HB 0.5m 85° | 2x1695–2690 7.5dBi
91121954
Type No.
Use case
Flexible Indoor Coverage
Flexible Street Level Micro Cell Coverage
Not for Macro Site Installation
Pole and wall mounting
Electrical data
Per sector
Frequency range
MHz
Polarization
°
Gain
dBi
Horizontal Pattern:
Half-power beam width
°
Cross polar ratio
0°
dB
60°
Vertical Pattern:
Half-power beam width
°
Electrical tilt
°
(upright installation)
1695–2690
1695 – 2690
+45, –45
7.5
85
≥ 18 typ.
≥ 8 typ.
Impedance
VSWR
Ω
Isolation, between all
ports
Intermodulation IM3
Max. power per input
dB
50 Ω
1695 – 1710 MHz: < 1.6
1710 –2200 MHz: < 1.5
2200– 2690 MHz: < 1.6
≥ 25 (Intra- / Intersystem)
dBc
W
< −153 (2 x 43 dBm carrier)
50 (at 50 °C ambient temperature)
Top view / connector view
Connectors (4.3-10)
covered by end cap
80
0, fixed
Mechanical specifications
Input
Adjustment
­mechanism
Tilt adjustment
­mechanism
­(installation at right
angle)
Azimuth adjustment
mechanism (upright
installation)
IP Protection class
Wind load
N
(at 150 km/h)
lbf
Max. wind
km/h
velocity
mph
Feeder cables
1695 - 2690
68
4 x 4.3-10 female
(2 x top, 2 x bottom,
covered by end cap)
Two continuously rotatable antenna
modules (radiator and reflector)
within the radome (set by hand)
Set by hand
Continuously for each sector
(0° … 360°)
Set by hand
Continuously for each sector
(0° … 360°)
IP65
25
5.6
160
99.4
Max. ¼˝ High Flex (bending radius
≤ 25 mm | ≤ 1.0 inches)
push pull and handscrew type,
angular connector required
mm
≥ 40
inches
≥ 1.6
Allowed
dia­meter of
mounting
pole
Max. distance mm
inches
wall/pole
when mounted
Height /
mm
diameter
inches
Category of
mounting hardware
Weight
kg
lb
Packing size
mm
inches
190
7.5
526 / 100
20.7 / 3.9
L (Light)
2.0
4.4
547 / 242 / 174
21.5 / 9.5 / 6.9
Omni Slimpole Antenna
Dual Polarization
HPBW
1710–2690
X
360°
2-Port Omni Slimpole 1710–2690 360° 5dBi
91121237
Frequency range
MHz
Polarization
°
Gain
dBi
Horizontal Pattern:
Half-power beam width
Deviation from
dB
­circularity
Vertical Pattern:
Half-power beam
°
width
Electrical tilt
°
Ω
1710–2690
1920 – 2170
2170 – 2490
+45, −45
+45, −45
2x5
2x5
2490 – 2690
+45, −45
2x5
Omni
±1
Omni
±1
Omni
±1.5
Omni
±1.5
42
40
36
33
0, fixed
dB
50
< 1.5
> 30
dBc
W
80010126: < −150 (2 x 43 dBm carrier)
100 (at 50 °C ambient temperature)
2300–2600 MHz
Impedance
VSWR
Isolation,
between ports
Intermodulation IM3
Max. power per input
1710 – 1990
+45, −45
2x5
691 mm | 27.2 inches
Type No.
Mechanical specifications
Input
Connector position
Weight
2 x N female
Bottom
kg
2.3
lb
5.1
Wind load
N
50
(at 150 km/h)
lbf
11.2
Max. wind velocity
km/h
200
mph
124
Mechanical interface
Flange connection 8 x M6
at a graduated diameter of
136 mm | 5.4 inches.
Evenness of the opposite surface:
0.5 mm | 0.02 inches
Packing size
mm
740 x 220 x 220
inches
29.1 x 8.7 x 8.7
Height / diameter
mm
691 / 100
inches
27.2 / 3.9
69
1-Port Omni Antenna
Vertical Polarization
Indoor and outdoor use
1695–2700
V
1-Port Omni Antenna HB 0.1m 360° | 1695–2700 2dBi
Input
Connector position
Frequency range
VSWR
Gain
Impedance
Intermodulation IM3
Polarization
Max. power
Weight
Radome diameter
Height
Fire load
MHz
dBi
Ω
dBc
W
g
lb
mm
inches
mm
inches
kWh
1 x N female
Bottom or top
1695 – 2700
< 1.8
2
50
< −150 (2 x 43 dBm carrier)
Vertical
50 (at 50 °C ambient temperature)
150
0.33
20
0.8
115
4.5
0.07
Material:
Radiator: Brass.
Radome: Fiberglass, color: White.
Mounting:
One hole mounting (16 mm | 0.6 iches diameter)
to s­ urfaces of max. 10 mm | 0.4 inches thickness.
Grounding:
All metal parts of the antenna and the mounting
kit are DC grounded. The inner conductor is not
DC grounded.
70
115 mm | 4.5 inches
91121542
Type No.
1-Port Omni Antenna
Vertical Polarization
Indoor and outdoor use
694–960/1695–2700
V
1-Port Omni Antenna LB/HB 0.2m 360° | 694–960/1695–2700 2dBi
Input
Connector position
Frequency range
VSWR
Gain
Impedance
Intermodulation IM3
Polarization
Max. power
Weight
Wind load
(at 150 km/h)
Radome diameter
Height
Fire load
MHz
MHz
dBi
Ω
dBc
W
g
lb
N
lbf
mm
inches
mm
inches
kWh
1 x N female
Bottom or top
694 – 960 / 1695 – 2700
694 – 864
864 – 894
894 – 960
1695 – 2700
< 2.0
< 2.2
< 2.5
< 2.0
2
50
< −150 (2 x 43 dBm carrier)
Vertical
50 (at 50 °C ambient temperature)
210
0.46
6
1.3
30
1.2
202
8.0
0.2
Material:
Radiator: Brass.
Radome: Fiberglass, colour: White.
Mounting:
One hole mounting (16 mm | 0.6 inches diameter) to
­surfaces of max. 10 mm | 0.4 inches thickness.
202 mm | 8.0 inches
91121957
Type No.
71
2-Port Indoor Antenna
Dual Polarization
HPBW
Integrated Combiner
694–960
1710–2690
X
X
80°
65°
C
2-Port Indoor Antenna LB/HB C 0.4m 80°/65° |
694–960 7dBi | 710–2690 8dBi
91121993
Type No.
Frequency range
Polarization
Gain
Half-power beam
width; hor., ver.
Impedance
VSWR
Isolation, between
ports
Max. power per port
Passive Inter­
modulation PIM 3
Input
Protection class
Weight
Packing size
Height/width/depth
MHz
°
dBi
694 – 960
+45, −45
7
1710 – 2690
+45, −45
8
°
typ. 80
typ. 65
Ω
W
50
694 – 960 MHz: ≤ 2.2
1710 – 2690 MHz: ≤ 2.2
694 – 806 MHz: ≥ 16
806 – 960 MHz: ≥ 20
1710 – 2690 MHz: ≥ 20
20 (at 50 °C ambient temperature)
dBc
< −140 (at 2 x 26.5 dBm carrier)
kg | lb
mm
inches
mm
inches
2 x 4.3-10 female
IP 30
1.6 | 3.5
417 / 281 / 141
16.4 / 11.1 / 5.6
399 / 237 / 63
15.7 / 9.3 / 2.5
dB
Operating
°C
­temperature range
Fire protection classification
Fire load
kWh
−5 … +55
UL 94-V2
5.3
Material:
Reflector: Brass.
Radome: ASA / PC, colour: White.
Mounting:
Position: Wall and ceiling possible.
The antenna is mounted with four screws
(4.5 mm | 0.18 inches nominal diameter, srew
head dia­meter max. 9 mm | 0.35 inches).
Screws are not supplied.
After antenna mounting install the antenna
cover.
Available accessories:
Broadband power splitters and tappers
(380–5920 MHz).
260 | 10.2
205 | 8.1
Antenna rearside with four drilling holes
All dimensions in mm | inches
72
Antenna and antenna cover
694 –960
−45°
1710–2690
−45°
694 –960
+45°
1710–2690
+45°
C
C
4.3-10
4.3-10
694–5920
2-Port Indoor
MIMO Omni Antenna
V
Vertical Polarization
694–5920
V
•The antenna can be operated in all indicated frequency
­ranges ­simultaneously.
2-Port Indoor 694–5920 360° 2dBi
Type No.
Frequency range
Port 1 and Port 2
Polarization
Gain, typ.
Gain, max.
MHz
dBi
dBi
Impedance
VSWR
Ω
Isolation
dB
Intermodulation IM3
(2 x 40 dBm carrier)
dBc
Max. power per input
(at 50 °C ambient
temperature)
W
Max. effektive power
for the antenna
Input
W
Protection class
Weight
Packing size
Diameter
(antenna module)
Height
(antenna module)
Fire load
g
lb
mm
inches
mm
inches
mm
inches
kWh
80010712
Port 1
694 – 960
1427 – 1518
1695 – 2690
3400 – 3800
4920 – 5920
Port 2
694 – 960
1427 – 1518
1695 – 2690
3400 – 3800
4920 – 5920
Dual vertical
2
694 – 960 MHz: 4.0 – 5.5
1427 – 1518 MHz: 5.0 – 5.5
1695 – 2690 MHz: 5.0 – 7.5
3400 – 3800 MHz: 5.5 – 7.0
4920 – 5920 MHz: 7.0 – 8.0
50
694 – 960 MHz: < 2.0
1427 – 1518 MHz: < 2.0
1695 – 2690 MHz: < 2.0
3400 – 3800 MHz: < 2.0
4920 – 5920 MHz: < 2.0
694 – 960 MHz: > 20
1427 – 1518 MHz: > 20
1695 – 2690 MHz: > 20
3400 – 3800 MHz: > 20
4920 – 5920 MHz: > 20
694 – 960 MHz: < −150
1427 – 1518 MHz: < −150
1695 – 2690 MHz: < −150
3400 – 3800 MHz: < −150
4920 – 5920 MHz: not relevant
694 – 960 MHz: 20
1427 – 1518 MHz: 20
1695 – 2690 MHz: 20
3400 – 3800 MHz: 10
4920 – 5920 MHz: 5
20
(at 50 °C ambient temperature)
2 x 4.3-10 female
(angular connector required)
IP 30
950
2.1
350 x 350 x 150
13.8 x 13.8 x 5.9
320
12.6
89
3.5
3.18
Material:
Reflector: Aluminum.
Radome: ASA/PC blend, colour: White. ­Additional
painting is possible.
Mounting:
– On-ceiling mounting:
Mounting kit 85010200 required
– Concealed antenna installation ­(ceiling
­thickness 3–35 mm | 0.12–1.38 inches):
Mounting kit 85010201 required
– Hidden antenna installation in double l­ayer
­ceiling, floors or similar – no additional
­mounting kit required
Accessories (order separately if required)
Type No.
Description
85010200
85010201
On-ceiling mounting kit
Support ring for concealed antenna
­installation
73
74
Summary – Splitters, Tappers,
Low Noise Amplifier
Type
Type No.
Frequency
range
Remark
Max.
power
Connector
female
Page
2-way Splitter 350–3800
92210012
350–3800 MHz
Indoor/Outdoor
300 W
4.3-10
76 +
77
3-way Splitter 350–3800
92210013
350–3800 MHz
Indoor/Outdoor
300 W
4.3-10
76 +
77
4-way Splitter 350–3800
92210014
350–3800 MHz
Indoor/Outdoor
300 W
4.3-10
76 +
77
2-way Splitter 380–3800
97121242
380–3800 MHz
Indoor/Outdoor
700 W
7-16
78
3-way Splitter 380–512
K7431348
380–512 MHz
Indoor/Outdoor
1000 W
7-16
79
4-way Splitter 380–512
K7431358
380–512 MHz
Indoor/Outdoor
1000 W
7-16
79
97131271
380–960 MHz
1695–2700 MHz
3400–3800 MHz
4920–5920 MHz
Indoor/Outdoor
100 W
4.3-10
80
97121253
1559–1609 MHz
TNC
N
81
Splitters
Tappers – Continuously adjustable ratio
Multi-band Tapper 380–960/1695–2700/
3400–3800/4920–5920
5.0–20.0dB
Low Noise Amplifier GPS
Low Noise Amplifier GPS
Product Line of Mounting Parts for Panel Antennas
82
Side-mounting Brackets for Omni Antennas
83 +
84
Kathrein’s Remote Electrical Tilt System (RET)
86 +
87
Accessories
Mechanical Accessories and Remote Electrical Tilt
75
Low-loss Power Splitters
Multi-band
Connector 4.3-10
350–3800
For indoor and outdoor use.
2-way Splitter 350–3800
3-way Splitter 350–3800
4-way Splitter 350–3800
92210012
Type No.
Connectors
Max. power (at 50 °C
­ambient temperature)
For connecting ... antennas
Frequency range
VSWR
Intermodulation IM3
Impedance
Insertion loss
Weight
(without mounting kit)
Dimensions (w x h x d)
2
≤ 1.25 (Port 1)
964 g
92210013
92210014
3
350 – 3800 MHz
≤ 1.25 (Port 1)
≤ −155 dBc (2 x 20 W) | typical: ≤ −160 dBc
50 Ω
< 0.05 dB
1045 g
4
4.3-10 socket (50 Ω)
300 W
≤ 1.35 (Port 1)
1134 g
See drawings on following page
Mounting:
Indoor use: No additional mounting material is necessary.
Outdoor use: Mounting material is listed below (order separately).
DC capability:
DC transmission between all terminations
(suitable for remote power supply systems).
Environmental conditions:
ETS 300 019-1-1 class 1.2
ETS 300 019-1-2 class 2.3
ETS 300 019-1-4 class 4.1 E
– Low temperature: –30 °C
– High temperature (dry): +65 °C
IP 65
92210012
92210013
92210014
Mounting material (order separately)
Type
Description
Remarks
92210015
734365
Mounting kit
1 clamp
Mast: 45–125 mm diameter
92210015
734365
76
Low-loss Power Splitters
Multi-band
Connector 4.3-10
350–3800
92210012
wallmast-mounting kit
(Option) BN 92210015
92210013
wallmast-mounting kit
(Option) BN 92210015
92210014
Accessories
wallmast-mounting kit
(Option) BN 92210015
77
Low-loss Power Splitters
Multi-band
380–3800
For indoor and outdoor use.
2-way Splitter 380–3800
97121242
Type No.
Connector (female)
Max. power
7-16
700 W
(at 50 °C ambient temperature)
2
380 – 3800 MHz
< 1.5
< −150 dBc (2 x 43 dBm carrier)
50 Ω
< 0.05 dB
870 g
300 x 75 x 75 mm
For connecting ... antennas
Frequency range
VSWR
Intermodulation IM3
Impedance
Insertion loss
Weight
Packing size
Material:
Brass. Surface treatment: CuSnZn3
Mounting:
Bracket for wall mounting included in the scope
of supply.
For pipe mast mounting use clamps listed below
(order separately).
DC capability:
DC transmission between all terminations
(suitable for remote power supply systems).
Environmental conditions:
ETS 300 019-1-4 class 4.1 E
– Low temperature: –55 °C
– High temperature (dry): +60 °C
IP 65
14.5
15
SW 24
7
34
35
61
input
36
260
SW 24
11
54
input
13.5
263.5
Clamps (order separately)
Type
736801
736802
736803
736804
736805
78
Description
Remarks
1 clamp
1 clamp
1 clamp
1 clamp
1 clamp
Mast: 34–60 mm diameter
Mast: 60 –80 mm diameter
Mast: 80 – 100 mm diameter
Mast: 100 – 120 mm diameter
Mast: 120 – 140 mm diameter
736805
Power Splitters
380–512
For indoor and outdoor use.
3-way Splitter 380–512
4-way Splitter 380–512
K7431348
Type No.
Connector (female)
Max. power
K7431358
7-16
7-16
1000 W
(at 50 °C ambient temperature)
3
4
380 – 512 MHz
< 1.1
50 Ω
< 0.05 dB
409 x 82 x 82
[16.1 x 3.2 x 3.2]
425 x 93 x 107
[16.7 x 3.7 x 4.2]
For connecting ... antennas
Frequency range
VSWR
Impedance
Insertion loss
Max. size
(mm)
[inches]
Packing size
(mm)
[inches]
Material:
Case: Aluminum.
Inner conductor: Brass.
Mounting:
Bracket for wall mounting included in the scope
of supply.
For mounting to tubular masts use clamps as
listed below
(order separately).
K7431358
Type
734360
734361
734362
734363
734364
Description
Remarks
(mm) [inches]
2 clamps
2 clamps
2 clamps
2 clamps
2 clamps
Mast diameter: 30–55 [1. –2.2]
Mast diameter: 55–75 [2.2–2.9]
Mast diameter: 75–95 [2.9– .7]
Mast diameter: 95–115 [3.7–4.5]
Mast diameter: 115– 35 [4.5–4.3]
Accessories
Clamps (order separately)
734364
79
380–960 / 1695–2700 / 3400–3800 / 4920–5920
Multi-band Low-loss Power Tapper
5.0 dB – 20.0 dB
Continuously Adjustable Splitting Ratio
For indoor and outdoor use.
2-way Tapper 380–960/1695–2700/3400–3800/4920–5920
97131271
Type No.
Frequency range
380 – 960
1695 – 2700
3400 – 3800
4920 – 5920
Power ratio between
dB
–5 to –20
outputs (P2 / P1)
continuously adjustable
For connecting ... antennas
2
Insertion loss
dB
380 – 960 MHz: < 0.2
1695 – 2700 MHz: < 0.2
3400 – 3800 MHz: < 0.5
4920 – 5920 MHz: < 0.7
Impedance
Ω
50
VSWR
380 – 960 MHz: < 1.5
1695 – 2700 MHz: < 1.5
3400 – 3800 MHz: < 1.7
4920 – 5920 MHz: < 1.7
Intermodulation IM3 dBc 380 – 960 MHz: < −150 ( 2 x 43 dBm carrier)
1695 – 2700 MHz: < −150 ( 2 x 43 dBm carrier)
3400 – 3800 MHz: < −150 ( 2 x 43 dBm carrier)
4920 – 5920 MHz: not relevant
Max. power
W
100 (at 50 °C ambient temperature)
Connector
4.3-10 female
Weight
kg
0.4
lb
0.9
Environmental conditions
Indoor, outdoor use
Protection class
IP 65
Profile diameter
mm
50
inches
2.0
Packing size
mm
225 x 80 x 62
inches
8.9 x 5.0 x 2.4
Max. size (including
mm
160 / 63 / 52
connectors)
inches
6.3 / 2.5 / 2.0
MHz
Material:
Housing: Aluminum.
Inner conductor: Brass.
DC capability:
DC transmission only between input and port P1.
Splitting table (typical values)
80
P1
P2 / P1 [dB]
Splitting ratio
P1 / P2
−5
−6
−7
−8
−9
−10
−11
−12
−13
−14
−15
−16
−17
−18
−19
−20
3.2
4
5
6.3
8
10
12.6
15.8
20
25.1
31.6
39.8
50.1
63.1
79.4
100.0
Splitting attenuation
P1 / PInput [dB]
P2 / PInput [dB]
−1.3
−1.05
−0.85
−0.7
−0.6
−0.5
−0.4
−0.35
−0.25
−0.2
−0.15
−0.14
−0.12
−0.11
−0.1
−0.09
−6.3
−7.05
−7.85
−8.7
−9.6
−10.5
−11.4
−12.35
−13.25
−14.2
−15.15
−16.14
−17.12
−18.11
−19.1
−20.09
Power ratio
adjustment
mechanism
P2
Power ratio
scale
(P2/P1)
Blocking unit
Input
97131271
Low Noise Amplifier GNSS
(GPS, GLONASS, BEIDOU, GALILEO)
97121253
•The low noise amplifier 97121253 is designed for the use
­inside vehicles with train antennas with GNSS.
•It includes a preselection filter to prevent the inter­ference in
case of simultaneous operation at the frequency range
380–960 / 1710–3800 MHz and GNSS.
•The product fulfils the requirements according to EN 50155.
Block Diagram
lowpass
bandpass
filter GNSS
amplifier
bandpass
filter GPS
amplifier
bandpass
filter GNSS
bias-T
Output
N female
Input
TCN female
mm
inches
mm
inches
Additional features:
•The maximum input power at the input of the amplifier at the frequency
­range 380–960 MHz and 1710–3800 MHz is limited to +25 dBm.
•The noise level at the GNSS-frequency generated by the ­operation at the
­frequency range 380–960 MHz and 1710–3800 MHz should not exceed the
thermal noise level at the input of the GPS Amplifier, otherwise the noise
figure will be increased.
1)
Input (Antenna)
1) 5 | 0.2
2) 4.4 | 0.17
3) 7 | 0.28
TNC
3)
Environmental conditions:
Temperature range: −
25 °C … +55 °C (data as specified)
−40 °C … +85 °C (extended range) *)
N
Please note:
It is necessary to use four fixing screws to mount the LNA in case the
­installation height is more than 2 m.
The system operator (receiver) needs to secure a current limit of < 1000 mA.
Output
(DC +3.3 ... 5.5 V)
EU-RED:
Hereby, KATHREIN SE declares that the radio equipment type 86010142 is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://www.kathrein.com
ceiling
*) Extended range of operation:
Within an extended temperature range of −40 °C … +85 °C and an ­extended
supplied voltage range of 3.0 V … 6.0 V operation is possible with the
­following restrictions:
Noise figure: < 2.5 dB
Gain:
> 20 dB
bottom
top
Accessories
mA
70 | 2.8
93 | 3.7
V
1559 – 1609
25 ±2
< 2.0
< 1.8
3.3 ... 5.5, ripple < 50 mV,
supplied at inner conductor RF-output
≤ 30
TNC female
N female
70 x 22 x 50
2.8 x 0.9 x 2.0
4 holes, 4.5 diameter
4 holes, 0.2 diameter
30 | 1.2
Operation current
Connector input
Connector output
Dimensions
(w x h x l)
Mounting
MHz
dB
dB
50 | 2.0
Frequency
Gain
Noise figure
VSWR (input, output)
Operation voltage
897121253
2)
Type No.
22 | 0.9
53 | 2.1
Hanging installation position
All dimensions in mm | inches
81
Product Line
of Mounting Parts
Type
Windload
Classification
Clamp
light / medium
Clamp
Downtilt kit
Downtilt kit
Azimuth Adjustment Kit
Azimuth Adjustment Kit
Pole Diameter in mm
Type No.
light / medium / heavy
∅ 28–60
∅ 42–115
∅ 55–115
∅ 110–220
∅ 210–380
731651
738546
85010212
85010002
85010003
XM (X-medium)
∅ 55–115
85010111
XH (X-heavy)
∅ 55–115
85010096
XH (X-heavy)
∅ 110–220
85010097
XH (X-heavy)
∅ 210–380
85010101
light
732327
light / medium
737978
heavy
85010008
XM (X-medium)
85010110
XH (X-heavy)
85010099
light / medium
85010014
heavy
85010015
light / medium
85010016
heavy
85010017
X-heavy
85010098
Remark
Pole mounting
­ djustment angle ±30°
a
(additional clamp needed)
Wall mounting
adjustment angle ±30°
light / medium
heavy
X-heavy
Offset
∅ 88.9
∅ 88.9
∅ 114.3
∅ 139.7
∅ 114.3
∅ 139.7
∅ 114.3
light / medium
85010060
Mounting support clamp
heavy
85010061
X-heavy
2x Panel Mounting Kit
light / medium
heavy
X-heavy
Tension Band
light
82
742263
742317
742033
3 sector clamp
742034
85010058
85010059
85010102
85010104
max. Panel width 160
G
3 Sector Clamp
F
Azimuth Adjustment Kit
Clearance between pole
and ­antenna
(additional clamp needed)
742113
85010075
max. Panel width 325
Additional clamp needed
85010076
max. Panel width 377
85010087
∅ 110–220
85010103
max. Panel
width 378
∅ 210–380
85010108
∅ 34–60
734360
∅ 60–80
734361
Please note:
∅ 80–100
734362
Only usable
∅ 100–120
734363
without downtilt kit
∅ 120–140
734364
∅ 45–125
734365
New or changed product
Side-mounting Clamp
Omnidirectional Antennas
Large Pipe
Type No. 738908
For masts of 94–125 mm diameter
Antenna
Mast
b
a
b
Accessories
a
83
Side-mounting Bracket
Omnidirectional Antennas
∅D
Type No. 737398
Side-mounted bracket
(for mast diameters of 40–105 mm)
Type No.
737398
A
800/900 MHz
849203
Fits for antenna
type no.
Side-mounting is possible for four fixed distances between the tubular mast and the antenna:
800/900 MHz (holes 1 and 3)
A = 100 mm = 0.3 λ
A
A
acket
Bracket
nna
A
A A
A
A = 240 mm = 0.75 λ
A A
A
A
A
Bracket
Antenna
na base
A = 160 mm = 0.5 λ
Antenna
Antenna base
Antenna base
Mast
Bracket
Bracket
Hole 2
D
D
Pipe
D
Bracket
Hole 2 Hole 3
D
Horizonal
Radiation Pattern
Hole 3
DD
Spacing
A
Curve
Hole 1Hole 3
D
Hole 1
D
D
Pipe
D
Hole 1 Hole 3
D
Horizonal
Radiation Pattern
100 mm
dB
160 mm
3
0
direction from mast
to antenna
84
Spacing
A
Curve
100 mm
100 mm
160 mm
3
240 mm
D
dB
40 mm
Hole 3
0
direction from mast
to antenna
240 mm
Hole 3
85
Kathrein’s Remote Electrical Tilt System
Functionality of Different RET Technologies
RCU with RFID Feature
• External RCU 86010148V01 includes a RFID reader
• Antenna spindles are equipped with RFID tags
• The antenna specific data is stored on this tag:
a Type number
a Serial number
a Configuration File
• With power on, the data is read out automatically from the
tag by the RCU
• List of all updated antennas on our homepage:
www.kathrein.com/rfidspindle
FlexRET
• Integrated RET module inside the antenna (86010153V01)
• Pre-configured with the antenna specific parameters:
a Type number
a Serial number
a Configuration file
• Calibrated ex-factory
• The FlexRET module is exchangeable
a Automatic data transfer in case of exchange with
internal RFID tag
a Only calibration is neccessary
• Daisy chain possibility with FlexRET antennas and / or
­external RCUs
• Same module for all antennas
• SingleRET or MultiRET selection possible
• Array allocation possible with special Site Sharing Adapter
or Gender Adapter / Port Extender
Site Sharing Adapter
• Needed whenever the AISG control of a FlexRET antenna
shall be performed by a higher number of base stations
(BTS)
• 2 different realizations available
a 3-way Site Sharing Adapter: Type no. 86010154 –
­FlexRET control with up to 3 BTS
a 6-way Site Sharing Adapter: Type no. 86010155 – ­FlexRET
control with up to 6 BTS
• Daisy chaining of up to 3 FlexRET antennas
• Additional ALDs can be mounted prior to the Site Sharing
Adapter
• Flexible allocation of antenna arrays to the different BTS
units using a special software application via PC
• Each BTS can act independently
• Individual password protection of configuration possible
• Configuration can be sent to the Site Sharing Adapter with
every AISG control device (BTS or e.g. Kathrein ALC)
86
86010154
BTS or
Operator A
BTS or
Operator B
3 x AISG in
1 x FlexRET out
BTS or
Operator C
Kathrein’s Remote Electrical Tilt System
Functionality of Different RET Technologies
Gender Adapter (86010162)
• Can be used if 2 base stations (BTS) are interconnected to
one common FlexRET antenna
• Mounted on the FlexRET output of the module
• Converts the AISG output to an AISG input
• The allocation of the antenna arrays can easily be
­performed during the commissioning process via the BTS
Port Extender (86010163)
• Can be used if 2 BTS are interconnected to common
­FlexRET antennas in daisy chain
• Mounted on the FlexRET module by 2 screws
• Converts 1 FlexRET input and output to 2 FlexRET inputs and
outputs
• Daisy chaining with further FlexRET antennas and / or
external RCUs
• The allocation of the antenna arrays can easily be
­performed during the commissioning process via the BTS
Manuals for all our AISG control devices and for the Site ­Sharing Adapter as well as the corresponding software downloads can be
found on our homepage in the section “Technical Documents” respectively “Driver and Software”.
For details of the RET system please also see Kathrein’s RET brochure.
MOBILE
COMMUNICATION
Remote Electrical Tilt System
1919–2019
Passion to connect.
Kathrein’s overall RET system works
in accordance with the AISG (Antenna
Interface Standards Group) standard
and 3GPP (3rd Generation Part­ner­ship
Project).
87
Accessories
Overview of Products, Installation, Control Possibilities and FAQs
Title: AdobeStock.com | Straight8Stock
9980000155/0/0319/PPE/pdf | Technical data subject to change.
KATHREIN Special Communications GmbH
Gnigler Straße 56
5020 Salzburg, Austria
www.kathrein.com | info@kathrein-special-com.at