REV. DESCRIPTION CHG BY DATE A ORIGINAL RELEASE KMC 10/03/2023 B MODIFIED ITEM 610430-192A KMC 26/04/2023 C MODIFIED ITEM 610430-192B AND ADD 610430-192K KMC 30/05/2023 SLIDING FIT 2 SLIDING FIT 2 SLIDING FIT 1 8 SECTION A-A 9 9 9 6 4 7 9 5 Material <not specified> SHCS,1/4-20x0.88 PURCHASED,RAPID SHIM SOCKET HEAD CAP SCREW 1 SHSS,1/4x0.38 SOCKET HEAD SHOULDER SCREW 7 1 610430-192H PURCHASED, COMPRESSION SPRING 6 1 610430-192F MACHINED,FINGER AISI 4140 Steel STK, 9.53 X 25 X 90 ZINC PLATING RC 52-60 5 1 610430-192E MACHINED,BLOCK AISI 4140 Steel STK, 76.20 x 19 ZINC PLATING RC 52-60 4 1 610430-192D MACHINED,BLOCK AISI 4140 Steel STK, 76.20 x 19 ZINC PLATING RC 52-60 3 1 610430-192C MACHINED,SUPPORT AISI 4140 Steel STK, 76.20 x 11 ZINC PLATING RC 52-60 C 2 1 610430-192B MACHINED, SHAFT AISI 4140 Steel STK, 52 B 1 1 610430-192A MACHINED,COVER 7075-T6 ALUMINIUM MATERIAL C 10 1 610430-192K 9 5 8 ITEM QTY. DETAIL NO. DESCRIPTION RENTAPEN RS03-M20-M11-2C1D HARDWARE SHCS,1/4-20x0.88 CLASS 12.9 HARDWARE SHSS,1/4x0.38 Material <not specified> McMaster-Carr Supply Company 9657K607 Vendor VendorNo THIS DRAWING AND INFORMATION HEREON ARE PROPRIETARY TO GENESIS SYSTEMS AND ARE CONSIDERED TO BE CONFIDENTIAL. THE INFORMATION MAY BE USED BY OR COMMUNICATED TO OTHERS ONLY AS AUTHORIZED IN WRITING BY GENESIS SYSTEMS. x 65 STK, 165.10 ZINC PLATING RC 52-60 x 38.10 STOCK Finish Harden DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED STANDARD TOLERANCES ANGULAR X ± 1 WELD .XX ± 1.5 DESCRIPTION: ASSEMBLY, DISCO X ± 1.5 .X ± 0.38 SIZE .XX ± 0.13 =.XX ± 0.03 DESIGN: KMC DATE: 10/03/2023 MANUFACTURED DETAILS TO BE STAMPED DETAIL: WITH DETAIL NUMBER IF SIZE PERMITS. CHECK: KMC DATE: 10/03/2023 JHL DATE: 10/03/2023 D DETAIL NO: REV A 610430-192 SCALE 1:1 WT (KG): 1.59 SHEET 1 OF 8 Path: Z:\PROYECTOS 2022\MP 2409, MP 2410, MP 2411 & MP 2414 HPWH RHEEM PRODUTION LINE\610430\SW\ A SolidWorks 2018 A REV. DESCRIPTION CHG BY DATE A ORIGINAL RELEASE KMC 10/03/2023 B ADD KNURLING KMC 26/04/2023 18.00 R255.63 B CUT SQUARE PATTERN 1MM DEPTH ON THIS SURFACE 70.00 42.00 3.59 0 13.80 23.67 19.73 43.22 42.00 70.00 160.00 14.68 R5.50 MAKE WITH 3D MODEL [IGES] 20.24 47° 45.00 36.79 3.80 12.00 9.65 10-24 UNC 25.00 R35.50 18.00 0 0 60° TYP 25.00 R10.00 TYP 45.00 5.11 5X 1/4-20 UNC 35.56 31.75 57.00 25.00 H7 +0.021 0.000 THRU ALL R80.00 THIS DRAWING AND INFORMATION HEREON ARE PROPRIETARY TO GENESIS SYSTEMS AND ARE CONSIDERED TO BE CONFIDENTIAL. THE INFORMATION MAY BE USED BY OR COMMUNICATED TO OTHERS ONLY AS AUTHORIZED IN WRITING BY GENESIS SYSTEMS. DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED STANDARD TOLERANCES ANGULAR X ± 1 WELD .XX ± 1.5 DESCRIPTION: MACHINED,COVER STK, 165.10 x 38.10 X ± 1.5 .X ± 0.38 SIZE .XX ± 0.13 =.XX ± 0.03 DESIGN: KMC DATE: 10/03/2023 MANUFACTURED DETAILS TO BE STAMPED DETAIL: WITH DETAIL NUMBER IF SIZE PERMITS. CHECK: KMC DATE: 10/03/2023 JHL DATE: 10/03/2023 D DETAIL NO: REV A 610430-192 SCALE 1:1 WT (KG): 0.85 SHEET 2 OF 8 SolidWorks 2018 Path: Z:\PROYECTOS 2022\MP 2409, MP 2410, MP 2411 & MP 2414 HPWH RHEEM PRODUTION LINE\610430\SW\ R2.00 TYP REV. DESCRIPTION CHG BY DATE A ORIGINAL RELEASE KMC 10/03/2023 B MODIFIED CUTS KMC 30/05/2023 23.00 1.50 X 35° 5.50 SECTION B-B 9.00 CUT COARSE KNURLING PATTERN DIAMOND 1MM DEPTH ON THIS SURFACE B 14.29 23.00 38.00 9.00 2.00 X 45° TYP B Path: Z:\PROYECTOS 2022\MP 2409, MP 2410, MP 2411 & MP 2414 HPWH RHEEM PRODUTION LINE\610430\SW\ 3.80 18.80 5.50 4.45 7.76 R16.00 15.93 12.00 10.58 B B 31.86 46.00 1.50 0 1.50 -0.016 10.50 f7 -0.034 24.00 10.58 12.00 15.93 10.58 12.00 1.50 0 1.50 12.00 10.58 15.93 7.24 0 15.93 -0.020 20.00 f7 -0.041 46.00 THIS DRAWING AND INFORMATION HEREON ARE PROPRIETARY TO GENESIS SYSTEMS AND ARE CONSIDERED TO BE CONFIDENTIAL. THE INFORMATION MAY BE USED BY OR COMMUNICATED TO OTHERS ONLY AS AUTHORIZED IN WRITING BY GENESIS SYSTEMS. DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED STANDARD TOLERANCES ANGULAR X ± 1 WELD .XX ± 1.5 DESCRIPTION: MACHINED, SHAFT STK, 52 x 65 X ± 1.5 .X ± 0.38 SIZE .XX ± 0.13 =.XX ± 0.03 DESIGN: KMC DATE: 10/03/2023 MANUFACTURED DETAILS TO BE STAMPED DETAIL: WITH DETAIL NUMBER IF SIZE PERMITS. CHECK: KMC DATE: 10/03/2023 JHL DATE: 10/03/2023 C DETAIL NO: REV A 610430-192 SCALE 2:1 WT (KG): 0.15 SHEET 3 OF 8 SolidWorks 2018 3.80 23.69 20.97 10-24 UNC REV. DESCRIPTION CHG BY DATE A ORIGINAL RELEASE KMC 09/03/2023 24.68 H7 +0.018 10.50 0.000 8.00 SLIDING FIT 60° TYP 0 5X 6.53 THRU ALL 24.68 14.25 0 14.25 28.50 57.00 69.00 C 8.00 Path: Z:\PROYECTOS 2022\MP 2409, MP 2410, MP 2411 & MP 2414 HPWH RHEEM PRODUTION LINE\610430\SW\ 3.78 SECTION C-C C 7.22 -0.020 25.00 f7 -0.041 THIS DRAWING AND INFORMATION HEREON ARE PROPRIETARY TO GENESIS SYSTEMS AND ARE CONSIDERED TO BE CONFIDENTIAL. THE INFORMATION MAY BE USED BY OR COMMUNICATED TO OTHERS ONLY AS AUTHORIZED IN WRITING BY GENESIS SYSTEMS. DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED STANDARD TOLERANCES ANGULAR X ± 1 WELD .XX ± 1.5 DESCRIPTION: MACHINED,SUPPORT STK, 76.20 x 11 X ± 1.5 .X ± 0.38 SIZE .XX ± 0.13 =.XX ± 0.03 DESIGN: KMC DATE: 09/03/2023 MANUFACTURED DETAILS TO BE STAMPED DETAIL: WITH DETAIL NUMBER IF SIZE PERMITS. CHECK: KMC DATE: 09/03/2023 JHL DATE: 09/03/2023 C DETAIL NO: REV A 610430-192 SCALE 1:1 WT (KG): 0.12 SHEET 4 OF 8 SolidWorks 2018 11.00 3.00 X 45° 19.00 REV. DESCRIPTION CHG BY DATE A ORIGINAL RELEASE KMC 10/03/2023 57.00 11.30 7.70 H7 +0.015 0.000 THRU 60° 24.68 Path: Z:\PROYECTOS 2022\MP 2409, MP 2410, MP 2411 & MP 2414 HPWH RHEEM PRODUTION LINE\610430\SW\ 16.75 69.00 0 33.50 3X 6.53 THRU ALL 11.11 7.35 1.00 X 45° 24.68 THIS DRAWING AND INFORMATION HEREON ARE PROPRIETARY TO GENESIS SYSTEMS AND ARE CONSIDERED TO BE CONFIDENTIAL. THE INFORMATION MAY BE USED BY OR COMMUNICATED TO OTHERS ONLY AS AUTHORIZED IN WRITING BY GENESIS SYSTEMS. 28.50 14.25 0 R1.00 DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED STANDARD TOLERANCES ANGULAR X ± 1 WELD .XX ± 1.5 DESCRIPTION: MACHINED,BLOCK STK, 76.20 x 19 X ± 1.5 .X ± 0.38 SIZE .XX ± 0.13 =.XX ± 0.03 DESIGN: KMC DATE: 10/03/2023 MANUFACTURED DETAILS TO BE STAMPED DETAIL: WITH DETAIL NUMBER IF SIZE PERMITS. CHECK: KMC DATE: 10/03/2023 JHL DATE: 10/03/2023 C DETAIL NO: REV A 610430-192 SCALE 2:1 WT (KG): 0.20 SHEET 5 OF 8 SolidWorks 2018 R10.00 REV. DESCRIPTION CHG BY DATE A ORIGINAL RELEASE KMC 09/03/2023 19.00 R28.50 7.70 43° 11.30 34.50 14.07 R10.00 H7 +0.015 0.000 THRU 24.68 20.20 16.75 5.91 33.50 10.00 0 0 9.21 12.68 1.00 X 45° 24.68 R1.00 34.50 THIS DRAWING AND INFORMATION HEREON ARE PROPRIETARY TO GENESIS SYSTEMS AND ARE CONSIDERED TO BE CONFIDENTIAL. THE INFORMATION MAY BE USED BY OR COMMUNICATED TO OTHERS ONLY AS AUTHORIZED IN WRITING BY GENESIS SYSTEMS. 14.25 0 6.53 THRU ALL 11.11 7.35 0 16.48 14.60 12.77 27.97 33.97 2X DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED STANDARD TOLERANCES ANGULAR X ± 1 WELD .XX ± 1.5 DESCRIPTION: MACHINED,BLOCK STK, 76.20 x 19 X ± 1.5 .X ± 0.38 SIZE .XX ± 0.13 =.XX ± 0.03 DESIGN: KMC DATE: 09/03/2023 MANUFACTURED DETAILS TO BE STAMPED DETAIL: WITH DETAIL NUMBER IF SIZE PERMITS. CHECK: KMC DATE: 09/03/2023 JHL DATE: 09/03/2023 C DETAIL NO: REV A 610430-192 SCALE 2:1 WT (KG): 0.18 SHEET 6 OF 8 SolidWorks 2018 Path: Z:\PROYECTOS 2022\MP 2409, MP 2410, MP 2411 & MP 2414 HPWH RHEEM PRODUTION LINE\610430\SW\ 60° TYP REV. 6.35 H7 DESCRIPTION CHG BY DATE +0.02 0.00 THRU ALL R2.00 R6.00 2.00 X 45° TYP 9.30 7° 12.00 R2.00 9.00 12.00 6.00 3.00 0 0 19.80 25.00 30.00 D 62.00 7° D 42.00 5.40 VIEW D-D 30.00 6.25 2.30 1.50 THIS DRAWING AND INFORMATION HEREON ARE PROPRIETARY TO GENESIS SYSTEMS AND ARE CONSIDERED TO BE CONFIDENTIAL. THE INFORMATION MAY BE USED BY OR COMMUNICATED TO OTHERS ONLY AS AUTHORIZED IN WRITING BY GENESIS SYSTEMS. DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED STANDARD TOLERANCES ANGULAR X ± 1 WELD .XX ± 1.5 DESCRIPTION: MACHINED,FINGER STK, 9.53 X 25 X 90 X ± 1.5 .X ± 0.38 SIZE .XX ± 0.13 =.XX ± 0.03 DESIGN: KMC DATE: 09/03/2023 MANUFACTURED DETAILS TO BE STAMPED DETAIL: WITH DETAIL NUMBER IF SIZE PERMITS. CHECK: KMC DATE: 09/03/2023 JHL DATE: 09/03/2023 C DETAIL NO: REV A 610430-192 SCALE 2:1 WT (KG): 0.03 SHEET 7 OF 8 SolidWorks 2018 Path: Z:\PROYECTOS 2022\MP 2409, MP 2410, MP 2411 & MP 2414 HPWH RHEEM PRODUTION LINE\610430\SW\ 9.30 Path: Z:\PROYECTOS 2022\MP 2409, MP 2410, MP 2411 & MP 2414 HPWH RHEEM PRODUTION LINE\610430\SW\ 2.00 20.00 RENTAPEN MODEL: RS03-M20-M10.5-2C1D THIS DRAWING AND INFORMATION HEREON ARE PROPRIETARY TO GENESIS SYSTEMS AND ARE CONSIDERED TO BE CONFIDENTIAL. THE INFORMATION MAY BE USED BY OR COMMUNICATED TO OTHERS ONLY AS AUTHORIZED IN WRITING BY GENESIS SYSTEMS. DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED STANDARD TOLERANCES ANGULAR X ± 1 WELD .XX ± 1.5 DESCRIPTION: PURCHASED,RAPID SHIM X ± 1.5 .X ± 0.38 SIZE .XX ± 0.13 =.XX ± 0.03 KMC DATE: 10/11/2022 B DATE: 10/11/2022 WT (KG): DESIGN: KMC DATE: MANUFACTURED DETAILS TO BE STAMPED DETAIL: WITH DETAIL NUMBER IF SIZE PERMITS. CHECK: DETAIL NO: JHL 10/11/2022 REV A 610430-192 SCALE 5:1 0.00 SHEET 8 OF 8 SolidWorks 2018 11.00