-. iT
if
i
I'
J-250Dr85
^iidrews.Thru^ Bearings
3
S'-J
■■
'5^^
4.
BERRY BEARING CO.
44 MADISON ST.
OAK PARK, II 60302
PHONE 312 524-2200
8^
MPB
CORPORATION
Andrews® Bearing Corporation
Subsidiary of MPB Corp.
New Cut Road
Spartanbu'^. oC 29304
Andrews:.
THRUST BEARINGS ARE OUR BUSINESS
Standard Ball Thrust Bearings:
Standard size ranges, .188"
ings. Materials: Thru-
ID thru 30” O D. Metric
sizes also available. Stan
hardened and case har
dened steels in races,
dard configurations include:
self-aligning: one-piece
banded (inside or outside):
plates and balls. Bronze,
stamped steel or nylon re
tainers. Standard precision
flat seat-flat race: flat seat-
tolerances are also available.
grooved race: single and/or
double-acting thrust bear¬
Standard Cylindrical Roller Thrust Bearings:
Standard series in Light,
Medium and Heavy-Duty
cross section, .875" ID
available. Materials: Case
hardened or thru-hardened
races and rollers. Bronze
thru 30" 0 D. Medium and
retainers. In larger sizes
Heavy Duty series available
in self-aligning configura
featuring multiple rollers,
roller groups are staggered
according to size for opti
tion. O D Banded Standard
Crane Hook series also
mum wear and life.
standard Tapered Roller Thrust Bearings:
Standard series (TTHD)
in Heavy-Duty cross
section, 3" ID to 24" OD,
available for both OEM
and replacement
applications.
Materials: Case hardened
and thru-hardened races
and rollers. Bronze
retainers. Quality meeting
and exceeding estab
lished industry standards.
Special Bearing Assemblies:
Designed for specific cus
tomer applications in sizes
.250" ID thru 30" O D. Cus
bearings: large angular con
tact ball bearings: hardened
and ground thrust plates
(with or without grooves):
hydraulic pump wobble
tom features include: Spe
cial tolerances:special
materials (stainlesssteel,
M-50, etc.): special combi
double-direction ball and
nation radial and thrust
roller thrust bearings.
bearings: large size radial
plate assemblies: and
CONTENTS
BALL THRUST BEARINGS
INCH SERIES
EW & FT-0 Series
FT Series
6 Series
D Series
GT Series
W Series
HW Series
MW Series
XW Series
4400 Series
X Series
Y Series
2000, 3000,
4000 & 6000 Series
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Single Acting,
Specials
2
Flat Seat, Flat Race
3
Flat Seat, Flat Race
4
Flat Seat, Grooved Race, Banded .
Flat Seat, Grooved Race, Banded . 5
6
Flat Seat, Grooved Race
7
Flat Seat, Grooved Race
8
Flat Seat, Grooved Race
9
Flat Seat, Grooved Race
10
Flat Seat, Grooved Race
11-12
Flat Seat, Grooved Race
13
Flat Seat, Grooved Race
Flat Seat, Grooved Race, Banded . 14
Flat Seat, Grooved Race
15
METRIC SERIES
900 Series
1000 & 2900 Series
3900 Series
51100 Series
DL & DM Series
1900 Series
500&500AW Series
3700 & 3700AW Series
4100 Series
4100AW Series
800 & 800AW Series
Single Acting, Flat Seat, Grooved Race . .
Single Acting, Flat Seat, Grooved Race . .
Single Acting, Flat Seat, Grooved Race . .
Single Acting, Flat Seat, Grooved Race ..
Single Acting, Flat Seat, Grooved Race ..
Double Acting, Flat Seat, Grooved Race .
Single Acting, Self-Aligning, Grooved Race
Single Acting, Self-Aligning, Grooved Race
Single Acting, Self-Aligning, Grooved Race
Single Acting, Self-Aligning, Grooved Race
Double Acting, Self-Aligning, Grooved Race ....
16
17
18
19
20
21
22
23
24
25
26
CYLINDRICAL ROLLER THRUST BEARINGS
RTL, RT Series
RTW Series
RCT & RWCT Series
Single Acting, Light, Medium, Heavy Section . 27-29
Single Acting, Self-Aligning, Medium
30-31
Heavy Section . ..
32
Crane Hook Bearings
TAPERED ROLLER THRUST BEARINGS
TR-Series
Single Acting, Heavy Section
33
COMPONENTS
Retainers
Thrust Washers
Pressed Steel
34-35
36
ENGINEERING DATA
Ball Thrust Bearings
Roller Thrust Bearings
Special Bearings and Assemblies
37-39
40-41
42-43
Metric Conversion Table
44
Ordering Information
44
MPB and Andrews are registered trademarks of MPB Corporation and are registered in the U.S. Patent and Trademark Office.
Andrewsc^ Ball Thrust Bearings
EW & FT-0 series
BA-
inch dimensions
single acting
FLAT SEAT
H
FLAT RACES
TTTl
A
B
H
+.002
+.005
-.000
+.000
-.001
*EW-1/4
.254
.656
●EW-5/16
.317
*EW-3/8
.379
EW-1/2
.504
.750
.813
.969
EW-5/8
.629
1.094
BEARING
NUMBER
*EW-3/4
.754
EW-7/8
.879
1.004
*EW-1
*EW-1 1/8
*EW-1 1/4
EW-1
EW-1
EW-1
EW-1
1.129
1.254
3/8
1/2
5/8
3/4
1.379
EW-1 7/8
1.879
EW-2
●EW-2 1/4
1.504
1.629
1.754
2.004
2.254
-.005
Size
6
Static
94
%
156
83
95
92
101
244
154
.250
.250
.250
8
125
8
125
.250
10
.281
10
%2
Dynamic
293
.138
,252
.500
.500
.500
16
Va
1000
425
.625
16
1270
538
.625
16
®/^2
%2
1270
1270
1420
Va
Va
875
14
Va
875
.625
16
%2
.625
18
%2
238
378
,268
.293
.293
530
1775
1600
1550
1400
1350
521
550
1325
1275
.461
405
397
single acting
n
FLAT RACES
A
B
H
+.005
-.000
+.000
-.003
+.005
-.005
ri
.438
FT-03
FT-04
.188
‘FT-05
.250
.938
.563
.531
.625
.188
.188
.250
.375
.219
LOAD RATING (lbs.)
BALLS
No.
Size
10
Vl6
'/is
%2
10
9
12
'k
10
U
Static
Dynamic
80
26
21
53
190
107
71
49
39
31
174
174
102
102
55
BEARING
SPEED
WEIGHT
LIMIT
Lbs.
4500
4500
4500
2900
4500
.006
3200
3200
4500
3200
3000
.045
.050
.016
.045
.088
.100
.024
.038
.375
11
.375
11
'k
.250
10
%2
89
.313
.813
.844
.625
.843
.375
8
.375
.688
.281
12
143
107
88
TT-010
^16
%2
FT-011
.375
1.031
10
yis
356
FT-012
.375
9
¥is
321
208
190
*FT-013
.438
.313
143
86
.438
9
9
'fz
FT-014
1.094
.813
1.094
.500
.500
yis
321
189
2450
2400
3800
2400
*FT-015
.500
188
100
4300
*FT-016
.500
188
100
3000
FT-06
.250
FT-07
.250
FT-08
.313
FT-09
.875
.500
.250
12
.875
.375
12
Vi
Thrust plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
2
.561
7
.188
.188
.188
●FT-02
.493
'7'
FLAT SEAT
*FT-01
.451
BA-
inch dimensions
NUMBER
.125
*Nyion retainer. Others are Bronze.
Thrust plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
BEARING
,044
.113
2,188
2,313
2,438
2,625
2.750
14
,025
.025
.034
4050
3850
3200
2250
2150
1850
12
12
.018
4500
221
.375
.375
.500
14
4500
.063
12
422
493
750
Lbs.
2400
12
,375
422
WEIGHT
LIMIT
165
227
.281
^16
¥i6
^16
SPEED
3000
1.313
1.500
1,625
1.750
2.063
2.875
3.125
BEARING
LOAD RATING (lbs.)
BALLS
No.
Y772
59
*Nylon retainer. Others are Bronze.
.011
.019
.064
.011
.019
,028
.109
Andrews^ Bail Thrust Bearings
FT series
BA-
inch dimensions
single acting
FLAT SEAT
H
FLAT RACES
BEARING
NUMBER
A
B
H
+ .002
+.000
-.000
-.003
+.005
-.005
LOAD RATING (lbs.)
BALLS
No.
Size
Static
.563
.563
10
?16
?16
625
625
186
688
189
189
205
FT-1
.503
FT-2
.566
1.219
1.219
FT-3
.628
1.344
.563
11
FT-4
.691
.563
11
yi6
¥i6
688
FT-5
.753
1.344
1.469
.563
14
^.6
813
FT-6
.816
.878
1.469
.563
.625
.625
14
^16
14
'/4
14
'k
813
1550
1550
.625
14
Va
.625
14
Vi
1550
1550
2.094
2.094
2.344
2.344
2.469
.625
15
V4
1660
.625
15
16
16
18
Va
1660
2.469
2.594
2.594
2.969
2.969
.625
.625
.625
.813
.813
.813
.813
.813
.813
.813
20
20
20
^16
18
%
18
20
20
%
%
4740
%
%
4740
^8
5240
5240
5740
%
%
●FT-7
●FT-8
.941
‘FT-9
●FT-10
1.003
1.066
FT-11
1.128
FT-12
1.191
FT-13
1.253
FT-14
1.316
●FT-15
1.378
●FT-16
1.441
FT-17
1.503
FT-18
1.566
FT-19
1.628
1.844
1.844
1.969
1.969
.625
.625
.625
FT-20
1.691
FT-21
1.753
FT-22
1.816
FT-23
1.878
FT-24
1.941
3.094
3.094
3.219
3.219
FT-2 5
2.003
3.344
3.344
3.594
3.594
3.719
3.719
.813
.813
.813
.813
.813
10
2.128
FT-28
2.191
FT-29
FT-30
2.253
FT-31
FT-32
FT-33
2.378
FT-34
2.566
FT-3 5
2.628
3.844
3.844
3.969
3.969
4.344
1.000
19
19
21
21
23
FT-3 6
FT-3 7
FT-38
FT-39
FT-40
2.691
4.344
1.000
23
2.753
2.878
4.594
2.941
4.594
1.000
1.000
1.000
1.000
24
2.816
4.469
4.469
FT-41
3.003
FT-42
3.066
FT-43
3.253
3.503
4.719
4.719
4.969
5.219
FT-44
2.316
2.441
2.503
.813
.813
.813
.813
1600
.315
362
362
376
376
1550
1450
1400
.367
.356
.480
.473
.516
1400
.510
1375
1375
1300
1300
.547
1250
1250
1100
1100
1075
1.000
.993
1.070
.970
1.172
822
839
839
1075
1000
1000
980
980
1.062
1.230
1.200
.685
1.313
832
832
980
980
960
960
850
.370
1.380
1.420
1.360
2.280
929
924
924
850
830
830
810
810
2.330
2.390
2.270
2.440
2.280
934
934
810
810
2.500
2.420
2.600
2.800
Vl6
^!6
Vl6
Vl6
Vl6
3110
3110
3460
3460
586
3800
%
24
24
%
24
%
%
1.000
1.000
25
%
25
1.000
27
%
%
1.000
26
%
Thrust plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
360
393
415
V4
2.066
1600
.154
.303
.293
.325
1990
2220
2220
3110
3110
20
18
18
FT-26
2000
1675
1675
1770
V4
FT-27
205
381
381
360
1770
1990
V4
20
20
.132
.121
.151
Va
18
3800
4490
4490
4740
4740
5740
5990
5990
5990
5990
6240
6240
6740
6990
BEARING
WEIGHT
Lbs.
2150
2150
2050
2050
2000
186
Va
Va
20
20
Dynamic
SPEED
LIMIT
1550
1450
393
415
596
596
586
621
621
655
655
822
877
877
909
909
929
969
770
976
765
.144
.169
.535
.931
.910
●Nylon retainer. Others are Bronze.
3
Andrews^) Ball Thrust Bearings
B series
-A-
inch dimensions
single acting
A
FLAT SEAT
H
GROOVED RACES
V
z
BANDED
BEARING
NUMBER
-A-
A
Ai
B
H
+ .002
+.010
-.010
+.015
-.015
+.005
-.005
.531
.594
.656
.719
.781
1.219
1.219
1.344
1.344
1.469
.625
10
V*
.625
10
V4
.625
12
V4
.625
12
.625
13
'/4
.844
.906
1.469
1.844
.625
13
V4
.750
14
.750
.750
.750
14
12
12
5/16
^6
.750
-.000
B-1
.503
B-2
.566
B-3
.628
B-4
.691
B-5
.753
B-6
.816
B-7
.878
B-8
B-9
.969
1.844
1.031
1.969
B-10
.941
1.003
1.066
1.094
1.969
B-11
1.128
1.156
B-12
1.191
1.219
B-13
1.253
1.281
2.094
2.094
2.344
B-14
1.316
1.344
2.344
B-15
1.378
1.406
2.469
B-16
B-17
1.441
1.469
2.469
1.503
1.531
2.594
B-18
1.566
1.628
1.594
B-19
B-20
1.691
1.656
1.719
2.594
2.969
2.969
B-21
1.753
B-22
1.816
B-23
1.878
1.781
1.844
1.906
1.969
2.031
2.253
2.094
2.156
2.219
2.281
2.316
B-31
No.
Size
LOAD RATING (lbs.)
Static
Dynamic
861
861
921
921
950
3650
3650
5768
9707
9707
WEIGHT
Lbs.
3500
.130
.126
.156
3500
.142
3350
.164
3350
2750
2750
2700
2700
.157
.342
.319
.361
.342
1971
2500
2500
2350
2350
2300
.400
.380
2300
2275
2275
1950
.513
.562
1950
.875
.969
%
11976
%
11976
13
13
15
15
16
%
%
12974
12974
1971
.750
.750
.750
.875
16
17
.875
16
3.094
3.094
3.219
3.219
3.344
.875
.875
17
17
.875
18
.875
18
.875
.875
.875
2.344
3.344
3.594
3.594
3.719
3.719
2.378
2.406
B-32
2.441
B-33
B-34
.750
BEARING
SPEED
LIMIT
4437
4437
5324
5324
5768
950
1463
1463
1913
1913
34
14970
%
14970
%
15968
1977
1977
2124
%
yi6
7i6
15968
16966
16966
21744
21744
2176
2176
2808
2808
19
Vl6
V16
Vl6
V16
Vl6
23103
23103
24462
24462
25821
2867
2867
2940
2940
3001
1900
1900
1850
1850
1825
19
Vl6
20
7/16
1.240
20
1.180
21
7/16
7/16
1750
.875
1725
1.250
.875
21
7/16
3001
3065
3065
3115
3115
1825
1750
.875
25821
27180
27180
28539
28539
1725
1.230
3.844
.875
22
7/16
1.320
3.844
.875
7/16
1705
2.503
2.566
2.531
3.969
.875
7/16
2.594
3.969
31257
2.628
2.656
4.344
.875
1.125
7/16
8-35
22
23
23
19
3147
3147
3217
3217
1705
2.469
29898
29898
31257
9/16
42674
4721
1700
1700
1425
1.280
1.370
1.320
2.230
B-36
2.719
4.344
1.125
19
?16
4.469
1.125
20
1400
2.300
B-38
2.816
1.125
1.125
20
20
1400
2.941
4.469
4.594
4.719
4797
B-39
B-40
2.844
2.969
3.031
44920
4797
1.125
21
9/16
Vl6
9/16
yi6
4721
4797
2.150
2.781
42674
44920
44920
1425
B-37
2.641
2.753
47166
4896
1375
1375
2.230
2.450
2.500
B-41
3.253
4.969
1.125
22
9/16
1370
2.680
3.503
5.219
1.125
24
?16
49412
53904
4984
B-42
3.281
3.531
5148
1275
2.830
B-24
1.941
B-25
2.003
B-26
2.066
2.128
B-27
B-28
B-29
B-30
2.191
3.003
.750
.750
.750
Dimensions, tolerances and material subject to change.
4
BALLS
%
17
16
2124
.494
.480
.525
.544
.900
.925
1.013
.963
1.670
1.020
Andrews^ Ball Thrust Bearings
D series
inch dimensions
-A/
single acting
/
A
FLAT SEAT
H
GROOVED RACES
BANDED
.j.
-A-
B
H
+.010
-.010
+.015
-.015
+.005
-.005
A
BEARING
NUMBER
+ .002
-.000
BALLS
No.
D-1
,503
.563
10
.566
.531
.594
1.219
D-2
1.219
,563
10
Size
V4
LOAD RATING (lbs.)
Static
Dynamic
BEARING
SPEED
LIMIT
WEIGHT
Lbs.
4437
861
4437
3800
3800
3650
3650
3550
.119
.113
D-3
,628
.656
1.344
.563
12
'/4
5324
D-4
.691
.719
1.344
.563
12
V4
5324
D-5
.753
.781
1.469
.563
13
V4
5768
861
921
921
950
D-6
.816
,844
1.469
13
'4
D-7
.878
.906
1.844
14
yi6
14
15
^16
¥i6
5768
9708
9708
10401
10401
950
1463
1463
1498
1498
3550
2900
2900
2800
2800
.144
.278
.266
.303
1533
1533
1603
1603
1638
2750
2750
2600
2600
2500
.328
.314
.407
.397
.452
.138
.180
.154
D-8
.941
.969
D-9
1.003
D-10
1,066
1.031
1.094
1.844
1.969
1.969
.563
.625
.625
.625
.625
15
^16
D-11
1.128
D-12
1.191
D-15
1.253
1.316
1.378
2.094
2.094
2.344
2.344
2.469
.625
.625
.625
.625
.625
16
16
18
18
19
V.6
5/16
D-13
1.156
1.219
1.281
1.344
1.406
5/16
5/16
5/16
11094
11094
12481
12481
13175
D-16
1.441
.625
.625
19
21
.460
,625
21
13175
14561
14561
2450
1.566
5/16
Vl6
5/16
1638
1697
D-18
2.469
2.594
2.594
.421
1,503
1.469
1.531
1.594
2500
D-17
1697
2450
D-19
1.628
1.656
2.969
.813
20
%
19960
2317
D-20
1.691
1.719
2.969
.813
20
%
19960
2317
2000
2000
.442
.850
.838
D-21
1.753
1.816
1.878
1,941
2.003
1.781
3.094
3.094
3.219
3.219
3.344
.813
21
%
.813
21
%
.813
.813
.813
22
22
23
%
%
%
20958
20958
21956
21956
22954
2358
2358
2410
2410
2439
1950
1950
1925
1925
1875
.887
.862
.931
.907
.975
3.344
3.594
3.594
23
24
24
25
25
%
2439
2475
2475
2516
2516
.950
1.160
%
22954
23952
23952
24950
24950
1875
1800
1800
1775
3.719
.813
.813
.813
,813
.813
2.406
2.469
3.844
.813
26
%
25948
2556
3.844
.813
26
%
25948
2556
2.531
3.969
.813
27
%
26946
2.594
3.969
%
2.656
4.344
.813
1.000
27
D-35
2.503
2.566
2,628
22
26946
39050
2589
2589
3996
1760
1760
1750
D-36
2.691
22
39050
3996
2.753
4.344
4,469
1.000
D-37
2,719
2,781
1.000
23
40825
D-38
2.816
2.844
4.469
D-39
2.941
3.003
2.969
3.063
4.594
1.000
1.000
4.594
1.000
23
23
23
D-40
D-41
3.003
24
1.000
1.000
25
3,503
4.719
4.969
5.219
1.000
D-42
3.031
3.281
3.531
D-14
D-22
D-23
D-24
D-25
D-28
2.066
2.128
2.191
D-29
2.253
D-30
2,316
D-31
2.378
D-32
D-33
2.441
D-26
D-27
D-34
D-39 1/2
3.253
1.844
1.906
1.969
2.031
2.094
2.156
2.219
2.281
2.344
3.719
27
%
%
%
'k
Vi
1775
.286
1.100
1.190
1.140
1500
1.250
1.200
1.280
1.230
1.930
4089
1500
1475
2.100
40825
40825
40825
4089
1475
2.030
4089
4089
1460
1460
2.130
42600
44375
47925
4171
4227
1430
2.250
1420
4344
1400
2.430
2.530
1750
1.950
2.100
Dimensions, tolerances and material subject to change.
5
Andrews^ Ball Thrust Bearings
GT series
B
A
inch dimensions
single acting
H
FLAT SEAT
GROOVED RACES
A
B
H
+ .002
+.010
+.000
+.005
-.000
-.010
-.003
-.005
GT-1
.503
.531
GT-2
●GT-3
.566
.594
,628
*GT-4
.691
GT-5
.753
.656
.719
.781
1.219
1.219
1.344
1.344
1.469
GT-6
,816
.844
GT-7
,878
A
BEARING
NUMBER
GT-8
.941
GT-9
1.003
GT-10
1.066
GT-11
GT-12
●GT-13
1,128
‘GT-14
1.316
‘GT-15
1.378
1.191
1.253
BALLS
No.
Size
.563
.563
.563
.563
.563
12
12
y>6
¥i6
12
yi6
12
yi6
14
yi6
.563
.625
.625
14
yi6
.906
.969
1.031
1.094
1.469
1.844
1.844
1.969
1.969
12
V4
'k
.625
12
12
12
1.156
1.219
1.281
1.344
1.406
2.094
2.094
2.344
2.344
2.469
.625
14
Vi
.625
14
V4
.625
17
.625
17
17
2.469
2.594
2.594
.625
.625
.625
17
18
18
16
●GT-16
1.441
●GT-17
1,503
●GT-18
1.566
GT-19
1.628
1.469
1.531
1.594
1.656
GT-20
1.691
1.719
2.969
GT-21
1.753
1.781
3.094
GT-22
1.816
1.844
3.094
GT-23
1.878
GT-24
1,941
GT-25
2.003
1.906
1.969
2.031
3.219
3.219
3.344
GT-26
2.066
3,344
GT-2 7
2.128
GT-28
2.191
2.094
2.156
2.219
3.594
.813
.813
.813
GT-29
GT-30
2.253
2.281
3.719
.813
2.316
2.344
3.719
.813
GT-31
GT-32
GT-33
2,378
3.844
3.844
.813
3.969
GT-34
2.566
GT-35
2.628
2.406
2.469
2.531
2.594
2.656
4.344
.813
.813
1.000
GT-36
GT-37
2,691
2.719
4.344
1.000
2.753
2.781
4.469
1.000
GT-38
2.816
2.844
4,469
1.000
GT-39
2.878
2.941
4,594
4.594
1.000
1.000
20
GT-40
2.906
2.969
GT-41
3,003
3.031
4,719
1.000
GT-42
3.066
3.253
GT-44
3.503
3.531
4.719
4.969
5.219
1.000
GT-43
3.094
3.281
20
20
20
23
2.441
2.503
2.969
3.594
3.969
.625
.625
.813
.813
.813
.813
.813
.813
.813
.813
1.000
1.000
6
Static
LIMIT
WEIGHT
Lbs.
3000
3000
3500
637
637
618
618
667
7000
7000
6800
6800
6400
.125
.119
.142
.135
.163
3500
5324
5324
5324
5324
667
1044
1044
1015
1015
6400
5400
5400
.274
1101
5000
.294
1101
5000
.313
%
6212
6212
7543
1205
4800
14
7543
’/4
7543
1205
1205
4800
4750
.400
.394
.431
7543
7987
1205
V4
4750
4550
4550
3650
3650
.413
.463
,445
.825
.813
V4
V4
’/4
3000
Dynamic
BEARING
SPEED
3000
7987
1208
1208
1714
1714
.150
5200
.266
.303
5200
.288
5/16
5/16
11094
11094
11094
1714
11094
20
yi6
Vl6
yi6
Vl6
18
%
1714
1930
1930
2610
3570
3570
3550
3550
3500
,881
.828
,945
.906
.953
2610
2550
2550
2550
2550
3500
3350
3350
3300
3300
1.078
1.063
1.156
1.125
2550
3250
3250
16
16
16
20
18
%
18
%
18
18
18
%
13868
13868
17964
17964
17964
17964
17964
.969
%
17964
18
18
22
%
%
17964
17964
%
17964
22
%
21956
2550
2550
2890
18
Vl6
24462
3449
3200
3200
2750
19
20
20
'/2
24462
35500
35500
35500
35500
3449
2750
4780
2700
4780
4780
4780
2700
1.938
2670
2650
2.047
1.946
35500
35500
35500
40825
4660
4660
4660
4870
2630
2600
2.078
2.039
2550
2000
2.172
20
Thrust plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
LOAD RATING (lbs.)
'/z
V2
Vi
'h
'k
'Nylon retainer. Others are Pressed Steel.
1.165
1,125
1.196
1.375
1.907
1.875
1.875
2.336
r
Andrews® Ball Thrust Bearings
W series
A-
inch dimensions
single acting
H
FUVrSEAT
2
GROOVED RACES
BEARING
NUMBER
W-1/4
W-5/16
W-3/8
W-7/16
W-1/2
W-9/16
W-5/8
W-3/4
W-7/8
A
A
+.002
-.000
H
+.000
-.002
+.005
-.005
B
+.002
-.000
.254
.317
,379
.442
.504
,813
1.000
1.000
1.281
1.281
.375
.531
.531
.625
.625
.254
.567
.629
.754
1.406
1.406
1.531
1.656
1.781
.625
.625
.625
.625
.625
.879
W-1
1.004
W-1 1/8
1.129
1.254
1.379
Vi
3550
1.406
5050
1.406
9
9
10
14
12
%2
.629
.754
.879
1.004
Stl.
Stl.
Stl.
Stl.
Stl.
.625
.719
.719
.719
.719
1.129
1.254
1.906
12
13
Vi
5300
1.504
1.629
2.469
Stl.
Stl.
Stl.
Stl.
Stl.
1.754
1.879
2.688
2.813
.442
W-1 3/4
1.754
1,879
2.688
2.813
.750
.750
+.000
-.002
+.005
-.005
2.969
3.219
3.344
3.594
3,719
.750
.875
.875
1.000
1.000
2.031
2.156
2.281
W-2 3/8
W-2 1/2
2.000
2,125
2.250
2.375
2.500
W-2
W-2
W-2
W-3
W-3
5/8
3/4
7/8
1/8
2.625
2.750
2.875
3.000
3.125
3.844
4.031
4.156
4.375
4.500
1.000
1.000
1.000
1.125
1.125
2.656
2.781
2.906
3.063
3.188
W-3
W-3
W-3
W-3
W-3
1/4
3/8
1/2
5/8
3/4
3.250
3.375
3.500
3.625
3.750
4.813
4.938
5.063
5.188
1.250
1.250
1.250
1.250
1.250
3.313
3.438
3.563
3.688
3.813
w-3 7/8
3.875
W-4
W-4 1/4
4.000
5.688
5.813
6.313
6,563
7.063
1.375
1.375
W-2
W-2 1/8
W-2 1/4
W-4 1/2
W-4 3/4
W-5
W-5 1/2
4.250
4.500
4.750
W-7
5.000
5.500
6.000
6.500
7.000
w-7 1/2
7.500
W-8
8.000
W-6
W-6 1/2
W-9
W-10
5.313
1.379
+.005
-.005
2.406
2.531
1.531
1.656
1.781
6
8
8
8
8
Static
.567
.379
1.629
+.002
-.000
Size
.504
.317
1.504
W-1 7/8
No.
LOAD RATING (lbs.)
Brn.
Stl.
Stl.
Stl.
Sti.
W-1 1/2
W-1 5/8
W-1 3/8
BALLS
Ret.
Mati.
.813
1.000
1.000
1.281
1.281
1.906
2.094
2.219
2.344
2.469
W-1 1/4
+.000
-.002
%2
1040
^16
2250
2250
3550
5050
Va
4430
Vi
6200
Va
5300
2071
1946
4100
2.938
3.188
3.313
3.563
3.688
Stl.
Brn.
Stl.
Stl.
Stl.
16
^16
%
%
Vl6
11100
16000
18000
24400
Vl6
24400
1922
2773
2945
3910
3880
3850
16
18
18
18
3450
3350
3050
2950
1.195
1.266
3.813
Brn.
Stl.
Stl.
Stl.
Stl.
16
18
18
20
20
Tie
Tie
24400
24400
35500
35500
3570
3730
3730
5310
5248
2900
2880
2850
2600
2550
1.430
1.406
1.438
1.867
1.930
19
18
18
18
18
42700
6176
40500
40500
40500
40500
6129
2400
2380
2270
2250
2150
2.520
2.960
2.020
3.160
2250
2000
1700
1670
1510
4.190
4.320
6.910
7.300
8.750
18683
20230
1490
1370
1250
1190
1100
13.450
16.650
20.500
25.000
1000
920
800
680
600
59.500
84.500
103.000
550
131.000
4.000
4.125
4.313
4.438
Vi
21700
Brn.
1.750
4.313
4.563
4,813
6.250
6.500
7.000
Brn.
1.750
2.000
7.250
8.000
8.625
9.281
10.000
Brn.
18
%
Stl.
'yi6
Brn.
20
18
1
Brn.
18
1‘/l6
97700
125000
128000
144000
Brn.
18
Vk
161500
10.125
2.625
10.875
11.625
2.750
3.000
13.125
3.500
W-11
9.000
10.000
11.000
14.625
15.875
4.000
4.250
W-12
12.000
17.375
4.500
4000
.249
.405
.560
+.005
-.005
5.750
6.625
7.125
.164
11800
11100
Brn.
6.063
.180
^16
^16
5.625
2.500
.356
.375
.391
.429
.147
17
16
3.938
4.063
2.375
.186
.211
.230
.080
.152
Stl.
Sti.
14
Brn,
9.406
6200
6200
5900
5700
5500
.094
14
16
2.344
5.000
5.125
5.250
5.063
5.563
1380
1380
1113
1333
1184
.044
5300
4800
4600
4550
4400
Stl.
2.000
10000
8050
8050
6600
6600
1184
1880
1934
1523
2035
Brn.
2.188
370
654
645
988
988
9000
9700
7850
11100
4.750
7.313
BEARING
WEIGHT
Lbs.
5^6
^6
%2
Vl6
2.094
2.219
4.875
8.063
8.688
Dynamic
SPEED
LIMIT
Brn.
Brn.
Brn.
18
18
18
18
Brn.
18
^16
3/16
yi6
yi6
yi6
6057
6010
5962
50000
7348
%
%
50000
72000
%
72000
97700
7200
10472
10323
13983
13804
16660
17255
7.625
10.750
Brn.
20
8.125
9.125
10.125
11.500
Brn.
18
1Vi
Brn.
Brn.
Brn.
18
18
18
1%
392000
11.125
13.000
14.500
15.750
179500
200000
287000
1%
450000
20800
24100
30000
37700
41250
12.125
17.250
Brn.
18
2
511000
44600
.594
.769
.883
3.270
10.400
32.410
37.500
Thrust Plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
7
Andrews« Ball Thrust Bearings
HW series
B
-A-
1
inch dimensions
single acting
I
P
FLflJSEAT
H
GROOVED RACES
A
B'
H
A
BEARING
NUMBER
HW-1/4
HW-5/16
HW-3/8
HW-7/16
HW-1/2
HW-9/16
HW-5/8
HW-3/4
HW-7/8
HW-1
HW-1 1/8
HW-1 1/4
HW-1 3/8
HW-1 1/2
HW-1 5/8
HW-1 3/4
HW-1 7/8
HW-2
HW-21/4
HW-2 1/2
HW-2 3/4
HW-3
HW-3 1/4
HW-3 1/2
HW-3 3/4
HW-4
HW-4 1/2
HW-5
HW-5 1/2
HW-6
B
+.005
-.005
+.005
-.005
.531
.625
.625
.719
.719
.313
.375
.438
2.063
.750
.750
.875
1.000
2.438
1.125
.625
.688
.813
.938
1.125
1.125
1.250
1.375
1.500
1.625
2.688
1.313
1.500
1.750
1.875
2.000
2.250
4.000
+.002
-.000
.250
.313
.375
.438
.500
.563
.625
.750
.875
1.000
+.000
-.002
.938
1.125
1.125
1.313
1.313
1.563
1.563
1.813
3.000
3.125
3.500
1.500
1.750
1.750
.500
.563
+.005
-.005
BALLS
No.
.875
1.063
1.063
1.250
1.250
1.500
1.500
1.750
2.000
2.313
%2
'k
'/4
9/32
9/32
8
8
8
8
8
2.563
2.875
3.375
8
8
8
8
5/16
5/16
%
7i6
^16
%
%
1.750
3.500
8
%
2.000
2.000
2.250
2.500
2.750
1.875
2.000
3.875
8
8
%
2.125
4.500
5.125
5.625
2.750
3.375
3.375
2.875
3.125
3.500
3.750
6.000
6.875
7.125
7.875
8.125
4.000
3.625
4.000
3.875
4.000
4.500
5.000
5.500
6.000
9.125
10.313
11.438
11.938
13.750
4.500
5.000
5.625
4.125
2.500
2.750
3.000
3.250
3.625
4.125
4.625
5.250
5.750
5.625
6.750
2.375
2.625
3.375
4.625
5.125
5.625
6.125
4.000
5.875
6.750
7.000
7.750
8.000
9.000
10.188
11.313
11.813
13.625
Thrust plates and roller assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
8
6
6
6
6
6
1.250
1.375
1.500
1.625
3.000
Size
8
1
8
V/B
8
LOAD RATING (lbs.)
Static
2040
2660
2660
3370
3370
5550
5550
7980
10900
14200
1080
6050
6050
1080
1540
1540
2150
2850
3620
6900
6900
1.31
1.88
2.00
3.06
3.19
4.44
1400
1200
1160
34700
39400
45700
44800
59000
850
730
620
600
500
V/2
8
1%
174000
9
2
8
2V4
227000
287500
8
8
B
2'b
2’/z
355000
355000
3
511000
.17
3100
2700
2650
2310
2275
17000
22300
21900
27700
27400
5330
7550
7410
.06
.09
.13
.18
.26
.26
.39
.59
.88
2010
1990
1740
1575
5410
BEARING
WEIGHT
Lbs.
5400
5400
4580
4050
3500
9960
9860
12600
14900
17300
1%
V/2
8300
43500
43500
56800
71900
88750
8
8
700
880
880
4480
8
I’/i
LIMIT
18000
22200
22200
31900
31900
88750
127800
127800
174000
8
Dynamic
SPEED
1450
990
960
4.82
6.60
9.56
12.62
13.39
22.36
23.50
32.25
36.00
52.75
74.00
106.00
111.00
Andrews^ Ball Thrust Bearings
MW series
-A-
inch dimensions
single acting
H
FLAT SEAT
GROOVED RACES
A
A
BEARING
H
+.002
+.000
-.000
.750
.875
1.000
1.125
1.250
B
+.005
+.005
-.002
+.005
-.005
-.005
-.005
1.563
.719
1.813
.750
2.000
2.250
2,500
.750
.875
1.000
,813
.938
1.125
1.375
1.500
1.625
1.750
1.875
2.625
2.875
3.000
3.313
3.438
1.000
1.125
MW-2 3/4
2,000
2.250
2.500
2.750
MW-3
MW-3 1/4
NUMBER
MW-3/4
MW-7/8
MW-1
MW-1 1/8
MW-1 1/4
MW-1 3/8
1.250
1.375
1.250
1.500
1.625
1.750
1.875
1.250
2.000
1.375
1.688
2.000
2.000
2.250
2.125
2.375
3.000
3.688
4.250
4.750
5.000
5.625
3.250
3.500
3.750
4.000
4.500
6.188
6.438
7.000
7.250
8.375
2.500
3.375
2.500
3.625
2.813
2.813
3.375
4.125
9.500
4.000
8.000
5.000
5.625
7.125
MW-8
10.375
11.125
12.750
14.375
4.250
MW-7
5.000
5.500
6.000
7.000
MW-9
9.000
16.625
6.750
MW-1 1/2
MW-1 5/8
MW-1 3/4
MW-1 7/8
MW-2
MW-2 1/4
MW-2 1/2
MW-3 1/2
MW-3 3/4
MW-4
MW-4 1/2
MW-5
MW-S 1/2
MW-6
1.125
4.500
2.625
2.875
3.125
3.875
4.625
5.125
5.625
6.125
1.500
1.750
1.875
2.125
2.375
BALLS
Ret
Matl.
No.
Brn.
8
10
Brn.
Size
%2
^16
Vl6
Nyl.
12
Brn.
Brn.
10
10
%
2.500
2.750
2.875
3,188
3.313
Brn.
10
%6
3.563
4.125
4.625
4.875
5.500
Brn.
10
Brn.
10
Brn.
10
Brn.
10
Brn.
10
1
6.063
6.313
6,875
7.125
8.250
Brn.
10
Brn.
Brn.
Brn.
Brn.
10
1%
1'.^
Brn.
10
10
10
^^6
StI.
12
Brn.
10
Vz
Brn.
10
Brn.
10
yi6
^6
%
%
10
114
10
V/a
10
LOAD RAHNG (lbs.)
Static
4500
6934
8320
9980
13590
13590
17750
17750
22460
22460
27730
39940
54360
54360
71000
89860
89860
110940
110940
159750
Brn.
Brn.
10
1%
1%
2
2%
8.125
9.375
10.250
11.000
12.625
14.250
10
2Vz
217440
249610
284000
359440
443750
9.125
16.500
Brn.
10
3
639000
Brn.
Brn.
Dynamic
1210
1680
1800
2300
3070
SPEED
LIMIT
5500
5000
4800
4100
BEARING
WEIGHT
Lbs.
.23
.34
.37
.54
3650
.78
3625
3200
3100
2900
2800
1.00
1.10
1.13
1.62
1.70
10500
2550
2150
1800
1775
13500
1600
2.16
3.75
5.69
5.94
8.62
3010
3880
3810
4770
4710
5730
8050
10700
16000
1450
15800
18400
18200
24800
1425
1280
30000
32800
920
860
800
41800
48100
640
560
44.00
58.00
67.00
99.50
152.00
62900
440
240.00
35600
1240
1100
11,70
12.25
16,70
17.50
29.50
Thrust plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
9
Andrews® Ball Thrust Bearings
XW series
inch dimensions
-A-
single acting
FLAT SEAT
GROOVED RACES
H
BEARING
NUMBER
A
B
H
+.002
-.000
+.000
-.002
+.005
-.005
XW-2
XW-21/8
XW-2 1/4
XW-2 3/8
XW-21/2
2.004
2.129
XW-2 5/8
XW-2 3/4
XW-2 7/8
XW-3
XW-31/8
2.629
2.754
XW-3
XW-3
XW-3
XW-3
XW-3
2.254
2.379
2.504
3.063
3.188
3.313
3.438
3.563
2.879
3.750
3.875
4.000
3.004
4.125
3.129
4.250
1/4
3/8
1/2
5/8
3/4
3.254
3.379
4.375
XW-3 7/8
3.879
4.004
3.504
3.629
3.754
4.500
4.625
4.750
4.875
XW-4 1/4
XW-4 1/2
XW-4 3/4
4.254
5.000
5.250
5.500
4.504
5.750
4.754
6.000
XW-5
5.004
XW-51/4
XW-S1/2
XW-5 3/4
XW-6
5.254
6.500
6.750
XW-6 1/2
XW-7
XW-71/2
XW-8
XW-8 1/2
XW-9
XW-9 1/2
XW-10
XW-4
5.504
5.754
7.000
6.004
7.625
6.504
8.125
7.004
7.504
6.004
8.750
9.250
10.000
8.504
10.500
9.004
9.504
10.004
10.504
11.004
11.250
XW-11 1/2
XW-12
XW-12 1/2
XW-13
XW-13 1/2
11.504
12.004
XW-14
7.250
11.750
12.500
13.000
13.750
Mali.
Size
1820
2030
3450
2020
3390
3330
3260
3230
.96
1.00
1.05
1.10
1.13
16650
16650
18000
18000
19400
2210
2210
2220
2300
3200
3150
3090
3050
3000
1.18
1.25
1.25
1.31
1.32
19400
28000
28000
36000
36
Vl6
%
%
%
%
36000
2300
3230
3230
3780
3780
2960
2680
2630
2390
2330
1.44
1.81
2.48
2.44
2.50
38000
40700
40700
43500
53250
4280
4400
4400
4600
5590
2100
2075
2050
1990
3.50
3.63
3.75
4.00
4.87
57000
67400
72000
88750
5850
6900
7230
8750
8900
1770
1650
1590
1460
1450
6.75
7.12
9.37
10.00
1230
1210
1100
1060
960
15.20
17.30
21.20
22.20
30.00
940
890
845
800
765
32.50
730
700
650
620
61.50
.750
Brn.
.750
.750
.750
.750
Brn.
Brn.
20
20
22
Vl6
^16
yi6
StI.
28
StI.
28
.750
.750
.750
.750
.750
StI.
24
yi6
StI.
24
26
26
28
Vl6
28
28
32
Brn.
28
yi6
Brn.
30
Vl6
Bm.
30
StI.
StI.
32
30
’/16
%6
1.250
1.375
1.375
1.500
1.500
StI.
V2
StI.
32
30
32
32
Brn.
34
%
94200
1.875
1.875
Brn.
32
%
Brn.
34
32
34
32
%
128000
136000
173500
184500
199500
12400
12600
16700
17000
'^6
212000
227000
241000
256000
288000
19200
20700
StI.
StI.
StI.
Brn.
Brn.
36
Brn.
2.375
2.500
2.625
2.750
2.875
Brn.
13.504
14.250
15.000
15.500
16.250
16.750
Brn.
34
32
34
32
32
14.004
17.500
Brn.
30
XW-141/2
14.504
15.004
Brn.
Brn.
30
XW-15
XW-151/2
XW-16
15.504
16.004
18.000
18.750
19.250
20.000
3.000
3.125
3.250
3.375
XW-16 1/2
16.504
XW-17
17.004
17.504
18.004
XW-181/2
18.504
XW-19
19,004
19.504
20.004
XW-19 1/2
XW-20
Brn.
Brn.
Brn.
>^16
1
1
1>/l6
Vk
18600
21400
22400
24400
1%
430000
r/i6
m
Brn.
21.250
3.750
Brn.
21.750
22.500
23.000
3.875
Brn.
Brn.
Brn.
32
23.750
4.250
4.375
Brn.
4.500
Brn.
32
32
34
Thrust plates and ball assemblies may be purchased separately
%
32
32
3.625
Brn.
Vz
1%
32
30
30
20.500
4.000
^16
25400
Brn.
Brn.
4.125
V2
301000
332000
354000
367000
403000
3.500
24.250
24.750
2220
1.125
1.125
1.125
1.125
1.250
StI.
2.375
XW-171/2
XW-18
^16
3000
3000
Brn.
Brn.
13.004
^16
yi6
2110
.750
.875
.875
1.000
1.000
Brn.
12.504
%2
Ul6
1^16
32
32
1%
1%
1%
27400
28500
29000
31000
4000
.60
.69
.75
.77
13850
13850
15250
23400
23400
^16
Vl6
%2
Brn.
LiMrr
3950
3800
3780
3670
20
20
22
22
24
StI.
StI.
Dynamic
BEARING
WEIGHT
Lbs.
2160
2160
1800
1800
StI.
StI.
StI.
StI.
StI.
.688
Static
SPEED
13900
13900
12300
12300
13500
.688
.688
.688
.688
2.125
XW-11
10
No.
2.125
XW-10 1/2
LOAD RATING (lbs.)
BALLS
Ret
1825
.80
5.19
38.50
43.00
49.50
54.00
68.00
79.50
83.00
590
96.00
560
470000
510000
510000
510000
32000
34500
36700
36200
36000
105.00
110.00
119.00
134.00
143.00
600000
600000
638000
41000
40500
41500
455
435
540
525
490
480
425
158.00
168.00
184.50
Dimensions, tolerances and material sublect to change.
Andrews- Ball Thrust Bearings
4400 series
B
-A-
inch dimensions
single acting
H
FLAT SEAT
GROOVED RACES
-A-
B
H
+ .002
+.010
+.000
-.000
-.010
-.003
+.005
-.005
No.
4401
.503
.625
.625
8
V4
.628
.691
1.438
1.438
1.563
'/4
.566
.625
10
%
1.563
.625
10
%
.753
.531
.594
.656
.719
.781
8
4402
4403
4404
4405
1.688
.625
12
'A
BEARING
NUMBER
A
BALLS
LOAD RAHNG (lbs.)
Size
Static
Dynamic
875
875
986
986
1082
6200
6200
5850
5318
8321
8321
1082
5650
1632
4900
1632
1632
1632
4900
4700
4700
9708
1650
1650
1650
1700
4550
4550
4400
4400
4280
4406
.816
.844
1.688
.625
12
'/4
.878
12
.750
12
1.003
1.938
1.938
2.063
2.063
.750
●4408
●4409
●4410
.906
.969
1.031
1.094
.750
.750
12
Vl6
^16
^16
5/16
4411
1.128
4412
1.191
1.156
1.219
4413
1.253
1.281
4414
1.344
1.406
2.438
.750
.750
.750
.750
.750
13
13
13
14
14
^16
?16
yi6
^16
4415
1.316
1.378
2.188
2.188
2.313
2.313
^6
9708
1667
4416
1.441
14
1.503
yi6
yi6
yi6
■%2
9708
4417
.750
.750
.750
.875
.875
1667
1796
1796
3010
17
17
1.066
4418
1.566
1.469
1.531
1.594
4419
1.628
1.656
4420
1.691
1.719
2.438
2.563
2.563
2.813
2.813
4421
1.753
1.816
1.781
2.938
1.844
2.938
12
16
16
16
16
LIMIT
3550
3550
4437
4437
5318
●4407
.941
SPEED
8321
8321
9014
9014
9014
11094
11094
18790
5850
5650
4280
4200
4200
3700
3700
18790
3010
16966
16966
16966
13866
13866
2633
1931
3500
13866
17964
17964
17964
1931
2620
2620
2620
2475
3500
3400
BEARING
WEIGHT
Lbs.
.189
.181
.214
.203
.239
.227
.378
.366
.408
.400
.453
.425
.471
.477
.505
.500
.545
.515
.780
.740
1.878
1.906
3.063
.875
.875
.875
4424
1.941
1.969
3.063
.875
4425
2.003
2.031
3.188
.875
17
20
20
4426
2.094
20
^16
.875
.875
18
18
2.281
2.344
3.188
3.313
3.313
3.438
3.438
.875
.875
18
%
%
%
4430
2.066
2.128
2.191
2.253
2.316
.875
22
4431
2.378
.875
18
%
17964
2535
3250
2.441
2.406
2.469
3.563
4432
3.563
17964
2535
3250
.980
2.503
2.531
4.000
18
16
%
4433
.875
1.125
2700
1.000
2.566
2.594
4.000
1.125
16
28400
28400
4183
4434
Vi
'h
4183
2700
1.750
4422
4423
4427
4428
4429
2.156
2.219
Thrust plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
%
%
%
Vl6
yi6
18458
2633
2633
1931
3650
3650
3570
3570
3400
3380
3380
.810
.790
.850
.860
.800
.920
.970
.860
.920
.920
1.010
●Nylon retainer. Others are Pressed Steel.
11
Andrews® Ball Thrust Bearings
4400 series
B
-A
inch dimensions
single acting
H
FLAT SEAT
GROOVED RACES
-A-
B
H
+ .002
+.010
+.000
+.005
-.000
-.010
-.003
-.005
4435
2.628
1.125
2.753
4.250
1.125
StI,
Stl.
4437
2.941
2.656
2.781
2.969
4.125
4436
4.438
4438
3.003
3,031
1.125
1.125
4439
3.128
3.156
4,500
4.625
4440
4,875
4442
3.503
4443
3.628
4444
3.753
3.281
3.406
3.531
3.656
3.781
4.750
4441
3.253
3.378
1.125
1.125
1.375
1.375
4445
3.878
3.906
5.875
4446
4.003
4.031
6.000
4447
4.128
4.156
6.125
4448
4.253
4.281
4449
4.378
4.406
6.250
6,375
4450
4.503
4.531
4451
4.628
4,656
4452
4.753
4.781
4453
4.878
4.906
4454
5.003
5.031
4455
5.128
5.156
4456
5,253
5,281
4457
5.378
5.406
4458
5.503
5.531
4459
5.628
5.656
4460
5.753
5.781
4461
5.878
4462
4463
A
BEARING
NUMBER
BALLS
Matl.
No.
Size
Vi
'k
Stl.
20
20
28400
33725
35500
V2
35500
1.125
Stl,
20
'k
35500
1.125
Stl.
Stl.
Stl.
Stl.
19
4650
4680
4680
4645
2.16
2.22
2.30
4.81
●Vl6
63764
4885
8249
8249
%
55460
6845
6845
6757
6757
6698
2000
1980
1975
1950
1920
79880
79880
79880
79880
79880
9711
9682
9623
9506
1730
7.75
1690
1680
1670
1660
8.13
8.47
8.65
8.80
79880
87868
07868
124800
124800
9419
9916
9887
1650
9.02
1640
1620
1450
1450
8.94
9.38
13.50
11.57
1450
1430
1420
1410
13.90
14.20
1380
15.50
1370
1290
21.00
20
%
Brn.
20
%
1,375
Brn,
20
%
6.750
6.875
7.000
7.125
7.250
1.625
1.625
Brn.
20
Brn.
20
7.375
7.500
7.625
8.250
8.375
5.906
8.500
8.625
6.003
6.031
8.750
1.875
6,128
6.156
8.875
4464
6.253
6.281
9.000
4465
6.378
9.125
4466
6.503
6.406
6.531
4467
6,628
6.656
4468
6.753
6.781
9.625
9.750
1,625
Brn.
20
%
1.625
Brn.
20
%
1.625
Brn.
20
1.625
1.625
Brn.
22
%
Brn.
22
3A
1.625
Brn.
22
^A
1.875
Brn.
20
‘^16
1.875
Stl.
20
‘^16
1.875
Brn.
20
1.875
Brn.
Brn.
20
1.875
1.875
Brn.
1.875
2.250
2.250
2.250
55460
55460
55460
55460
4540
9506
14742
14742
12490
%
108720
108720
119592
22
%
119592
Brn.
22
%
119592
13104
13046
Brn.
22
20
20
22
%
119592
20
1
2500
2.05
63764
Brn.
Brn.
2.07
40800
20
Brn,
1.75
1.99
●Vie
Brn.
1
1
2650
2650
2550
2550
%
20
Brn.
WEIGHT
Lbs.
2450
2430
2420
2050
2020
Stl.
9.500
4183
LIMIT
4645
Brn.
5.750
Stl.
Dynamic
BEARING
SPEED
35500
35500
1.375
1.375
1.375
1.375
5.625
Static
19
20
18
23
19
19
5,000
LOAD RATING (lbs.)
Ret.
142000
142000
156200
12402
13163
12987
15912
15883
16848
1285
1285
2.41
4.04
4.14
5.33
5.21
5.52
5.61
14.83
15.25
15.50
21.25
21.50
Thrust plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
f
12
Andrews. Ball Thrust Bearings
X series
B
A
inch dimensions
single acting
FLAT SEAT
GROOVED RACES
-j.\)
I
H
\
I
_1
PART
A
B
BALLS
H
A
B
H
Size
(min)
(max)
(max)
^16
10-X-11
1.061
1.936
.570
12
10-X-12
1.085
1.935
.630
12
10-XS-18
12-X-03
13-X-02
1.065
1.875
1.260
2.249
.505
.876
12
yi6
5/16
V4
%
1.378
2.450
.755
15
5/i6
1.378
2.000
.630
19
1.437
2.125
.380
22
1.500
.440
17
1.314
12
2.503
2.218
3.500
3.968
’5/64
5/i6
%
.818
18
2.559
3.507
3.543
.792
20
4.625
.755
26
ye
25-X-30
35-X-19
40-X-01
4.029
4.843
.692
34
y.e
47-X-01
4.760
5.843
.661
ye
57-X-06
5.757
7.250
1.130
36
32
80-X-20
8.007
10.000
1.505
32
(min)
03-X-08
05-X-04
05-XS-12
05-X-22
06-XS-07
.393
1.181
.477
10
.500
.380
10
.564
.995
1.276
.505
8
.503
1.218
8
%2
V4
.627
1.276
.630
.505
8
%2
06-X-53
.628
1.343
.474
12
5/i6
06-X-67
.634
1.251
.473
8
V32
07-X-04
.753
1.656
.567
14
%
07-X-05
.755
1.474
.572
14
07-X-10
.787
1.575
.556
10
Vl6
%2
07-X-27
.753
1.469
.567
10
V4
07-X-47
.753
1.468
.567
14
ye
07-X-60
.753
1.250
.442
12
07-X-63
.787
1.772
.832
8
08-XS-21
.795
1.456
.474
13
(max)
(max)
No.
BALLS
PART
NUMBER
NUMBER
13-X-07
14-X-01
15-X-01
16-X-14
25-XS-01
1.688
No.
12
Size
5/a
%
%
Vie
V4
%
Vie
Vi
Dimensions, tolerances and material subject to change
13
Andrews. Ball Thrust Bearings
Y series
B
-A-
inch dimensions
single acting
FLAT SEAT
I
GROOVED RACES
H
BANDED
PART
A
B
H
NUMBER
(min)
(max)
(max)
03-Y-01
03-Y-03
03-Y-04
03-Y-05t
03-Y-07
.312
.316
.313
.328
.375
.515
.255
19
.688
.313
.318
.349
.380
12
.615
.937
.640
03-Y-10
03-Y-12
03-Y-13
03-Y-14
03-Y-21
.375
.671
.380
.378
.765
.318
.391
.600
.515
.753
.187
03-Y-39
03-Y-40
04-Y-07
05-Y-03
05-Y-04
.378
.702
.378
.938
.440
.500
.890
.765
.500
.875
.328
.376
No.
B
H
NUMBER
(min)
(max)
(max)
No.
08-Y-05
08-Y-06
08-Y-07
08-Y-14
08-Y-26
.843
.843
.843
.829
1.265
1.265
1.390
1.093
25
20
18
31
.813
1.687
.501
.505
.505
.250
.878
Vi
08-Y-37
08-Y-38
.844
.505
.380
Vl6
09-Y-02
‘/l6
10-Y-03
10-Y-08
1.031
1.562
1.500
1.593
1.640
1.843
15
19
15
18
14
1.000
Size
'/16
16
yi6
%2
%2
.109
16
13
23
20
.314
13
'A
.505
.317
.442
17
10-Y-1S
10-Y-17
11-Y-01
.442
20
%2
%2
%z
%2
.442
16
Vi
11-Y-05
12-Y-03
12-Y-08
13-Y-03
15-Y-02
15-Y-03
1.281
15-Y-21
16-Y-01
16-Y-02
16-Y-03
16-Y-04
1.503
1.625
17-Y-03
18-Y-02
19-Y-08
21-Y-01
1.780
1.828
1.940
2.125
22-Y-04
2.253
14
12
OS-Y-05
05-Y-06
05-Y-11
.500
.990
.505
12
.501
1.122
.505
11
Yi6
%2
.531
.890
.443
17
Vi
05-Y-12
.564
.547
1.015
.567
15
.800
.187
25
05-Y-18
15
%z
17
Vi
13
1.140
.505
.442
.505
.505
%2
%2
.917
.187
29
05-Y-21
05-Y-49
05-Y-63
06-Y-05
.503
1.094
.532
.875
.505
.906
.656
06-Y-12
.641
17
.442
.567
19
12
Va
1.421
1.000
.995
.458
%2
.442
15
20
19
1.354
.578
12
Va
1.125
.505
17
%2
06-Y-52
.628
.628
.638
1.180
.562
14
07-Y-01t
.750
.442
.630
16
22
.190
34
06-Y-30
06-Y-32
06-Y-33t
06-Y-36
06-Y-42
06-Y-49t
06-Y-51
.653
.690
.627
.629
.653
.995
1.344
07-Y-03
.753
1.252
1.125
08-Y-04
.814
1.260
.380
t=special band
Dimensions, tolerances and material subject to change.
14
A
14
10
BALLS
WRT
BALLS
'A
%
Yi6
’A
11-Y-03
23-Y-01
23-Y-03
24-Y-02
28-Y-01
28-Y-04
.878
.938
1.065
1.000
1.125
1.188
1.125
1.250
1.343
1.530
1.572
1.628
1.656
1.688
2.312
2.375
2.427
2.875
2.878
.566
.630
.755
Size
'k
%2
3/16
11
y*
^6
'A
%2
Vl6
%
.630
9
8
15
.692
16
^6
2.313
.815
15
"A2
2.140
2.442
2.094
2.625
2.343
1.005
1.065
.630
1.005
.442
15
11
16
17
33
2.593
2.344
3.010
2.640
2.500
.630
.630
1.130
1.005
.755
26
19
14
17
20
3.015
2.593
1.255
14
'/2
.630
21
Yi6
3.010
.814
20
2.969
3.687
.630
25
Yi6
1.130
18
Vi
3.312
3.104
3.515
.567
.628
Va
.755
35
27
29
3.594
.630
32
4.593
1.130
20
2.187
2.437
1.995
2.197
1.066
1.316
OTHER SIZES AVAILABLE-CONSULT FACTORY
^6
'■/b2
Vi
Vl6
Vi
Va
^6
%
Yi6
Vl6
yi6
Andrews. Ball Thrust Bearings
2000 series
B-A-
(
BEARING
Ret.
Mali.
H
.250
.312
.406
.437
.437
.625
.675
.750
.875
.937
.437
.500
Stl.
2097
2458
2006
2132
.500
.500
.500
.625
.625
.750
.875
1.062
1.000
.437
.562
.312
.500
.562
Nyl.
Nyi.
2043
2009
2005
2007
2011
.629
.750
.750
.812
.875
1.250
1.250
1.250
1.250
1.375
.562
Stl.
.437
.562
.500
.562
Nyl.
Nyl.
.937
1.000
1.000
1.000
1.000
1.500
1.500
1.531
1.625
1.750
.500
.625
.656
.562
.562
2092
1.062
1.125
1.188
1.250
1.437
1.687
1.875
1.937
2.000
3.250
2004
2002
2001
2008
2014
2087
2010
2209
2024
2283
2096
.281
.250
.250
1.125
Brn.
StI.
StI.
BALLS
No.
8
9
Stl.
Size
'/a
11
Va
10
10
Va
%2
.021
.023
.063
Grooved
Grooved
Grooved
624
1331
1733
1331
2496
166
345
467
318
650
.029
Grooved
.061
Grooved
.040
.062
.099
Grooved
750
700
700
550
710
.115
.083
.115
.091
.124
Grooved
.136
.155
.179
.182
.221
Grooved
Grooved
Grooved*
Grooved
Grooved
.188
.225
.196
.388
2.132
Grooved*
Grooved
Grooved
Grooved
Grooved
.344
.300
1.236
.750
2.306
Grooved*
Grooved
Grooved
1.400
Grooved
Grooved
Grooved
Grooved
Grooved
Grooved
Brn.
Brn.
None
Stl.
Stl.
13
13
^6
Vl6
3245
3245
695
690
15
%
6655
1115
12
'k
6212
5324
1320
1165
.625
.562
.531
.813
1.312
None
Stl.
Stl.
Stl.
17
V*
7543
1172
19
^16
4743
14
Vi
14
Vi
6212
6212
643
1225
Brn.
10
%
27700
1225
6020
None
Stl.
16
Vi
7099
1250
16
10
18
'A
7099
17750
16780
1250
2630
38800
5700
24462
33690
3880
5750
24
7/^6
yi6
Vl6
16560
2210
20
Vi
23
Vi
24
^16
35500
41000
54000
5248
5450
6700
stl.
Brn.
14
3.500
.656
.562
1.125
.812
1.625
2281
2.504
2.500
2.813
3.254
3.755
4.630
3.685
.937
Stl.
3.968
1.375
Brn.
4.437
.594
1.125
1.281
1.500
Stl.
Stl.
Stl.
Brn.
H
Mail.
No.
Size
2284
Grooved
Grooved
yi6
%2
¥i6
yi6
2.375
2.968
2278
.017
2720
2995
2995
2600
3245
Brn.
2.381
4.498
5.060
5.997
.029
%2
^.6
Nyl.
Brn.
Stl.
None
Vi
%
14
18
15
TYPE
LBS.
293
281
335
308
467
8
12
12
15
13
Stl.
BEARING
WEIGHT
887
1000
1220
1109
1733
%2
1.687
1.750
2.000
2.000
2279
Dynamic
Va
1.629
2048
Static
12
10
12
10
2282
2177
LOAD RATING (lbs.)
10
2041
2021
2280
2023
3.250
FLAT SEAT
GROOVED RACES
H
B
2044
2003
2085
2063
single acting
H
A
NUMBER
inch dimensions
A
3770
Grooved
Grooved
Grooved
Grooved
Grooved
Grooved
Grooved
Grooved*
2.557
1.119
2.023
2.748
4.304
*Full complement of balls, no retainer.
3000, 4000 & 6000 Series
BEARING
NUMBER
A
B
BALLS
Ret.
3010
3016
.625
.812
1.125
.500
.500
None
None
14
1.281
16
Vl6
yi6
●*4703
2.248
3.437
.750
None
●*6630
2.250
3.136
.687
Stl.
25
16
yi6
●‘Special Textile Sizes. Retainer Code;
Stl.=STEEL
LOAD RATING (lbs.)
Static
3494
3994
20975
11094
BEARING
Dynamic
WEIGHT
TYPE
LBS.
650
672
.078
2140
.825
1650
.595
.080
Grooved*
Grooved*
Banded
Grooved
Brn.=BRONZE.
New/Old Part Number Interchange
Former Part Number
New Part Number
Former Part Number
New Part Number
2104
2249
08-Y-38
06-Y-52
03-Y-39
03-Y-40
3003
3004
3005
3008
08-Y-07
10-Y-03
12-Y-03
05-Y-03
See page 14
for new part
2251
05-Y-63
3010B
06-Y-51
number details
3001
05-Y-11
3002
06-Y-05
3017
3029
08-Y-37
15-Y-21
2117
2248
Dimensions, tolerances and material subject to change.
15
Andrewse Ball Thrust Bearings
900 series
metric
A-
L
metric dimensions
1
single acting
I
H
FLAT SEAT
A-
GROOVED RACES
A
MM
Tolerance
±.005
INCH
+.0000
INCH
-.0004
-.0004
-.0004
-.0004
-.0004
.402
.598
.795
.992
1.189
25
35
40
48
53
.984
1.378
1.575
1.890
2.087
1.386
1.583
1.780
1.976
2.173
62
64
73
78
88
2.441
2.520
2.874
3.071
3.465
18
18
22
22
24.5
2.370
2.567
2.764
2.961
3.228
90
100
103
no
115
3.543
3.937
4.055
4.331
4.528
24.5
27
125
135
4.921
5.315
5.512
5.906
6.102
-.002
MM
900
10
902
15
904
20
905
25
906
30
.3937
.5906
.7874
.9843
1.1811
907
35
1.3780
-.0005
908
909
40
45
1.5748
-.0005
1.7717
910
50
1.9685
911
55
2.1654
-.0005
-.0005
-.0006
912
2.3622
-.0006
2.5591
914
60
65
70
915
75
2.9528
916
80
3.1496
-.0006
-.0006
-.0006
-.0006
917
3.3465
-.0008
3.5433
-.0008
3.7402
-.0008
3.9370
921
85
90
95
100
105
4.1339
-.0008
-.0008
3.354
3.551
3.748
3.945
4.142
922
no
4.3307
-.0008
4.339
160
923
115
4.5276
-.0008
4.535
165
924
120
4.7244
925
926
125
4.9213
5.1181
-.0008
-.0010
-.0010
4.732
4.929
5.126
170
175
180
928
140
930
932
934
936
150
160
170
180
5.5118
5.9055
6.2992
6.6929
7.0866
-.0010
-.0010
-.0010
-.0010
-.0010
5.520
5.913
938
190
940
200
944
948
220
240
7.4803
7.8740
8.6614
9.4488
952
956
918
919
920
960
Ret.
+.000
Number
913
H
B
Bearing
INCH
MM
Matl.
Brn.
StI.
Balls
Size
%2
%2
9/32
Vl6
2700
5000
5600
6900
1355
1380
1660
5/16
9000
1845
12000
14000
18800
21700
28400
2490
2680
3290
24400
28400
33700
35500
40500
3900
4650
49800
53500
63600
68000
79500
12
.472
.551
14
.551
15.5
.610
Nyl.
Nyl.
15.5
.610
StI.
8
9
10
12
13
.709
StI.
12
%
.709
StI.
StI.
StI.
StI.
14
%
16
16
16
Vl6
StI.
18
16
19
20
18
yi6
18
16
%
.866
.866
.965
27
.965
1.063
1.063
1.063
29
1.142
Stl.
Stl.
Stl.
30.5
1.201
Stl.
30.5
32.5
32.5
1.201
Brn.
1.280
19
1.575
16
17
%
40
Stl.
Stl.
stl.
6.299
6.496
6.693
6.890
7.087
40
43
1.575
1.693
Brn.
18
Stl.
18
43
1.693
Brn.
20
1^16
‘^6
■?'16
46.5
1.831
Stl.
20
46.5
1.831
Stl.
20
‘^16
7.874
8.661
52
2.047
55
9.252
60
6.713
7.106
250
9.843
10.236
65
260
65
2.165
2.362
2.559
2.559
Stl.
Brn.
Brn.
Brn.
Brn.
20
18
20
20
20
‘5/16
1'/16
6.319
200
220
235
7.500
7.894
8.681
9.468
10.256
275
290
315
345
375
10.827
11.417
12.402
13.583
14.764
70
2.756
Brn.
70
80
2.756
Brn.
3.150
Brn.
85
3.346
90
3.543
Brn.
Brn.
20
20
20
20
20
iyi6
260 10.2362
-.0012
-.0012
-.0012
-.0012
-.0014
280 11.0236
300 11.8110
-.0014
-.0014
11.043
11.831
400
430
15.748
16.929
95
3.740
Brn.
20
1%
105
4.134
Brn.
20
2
130
2.7559
140
150
155
27
Dimensions, tolerances and material subject to change.
1.280
StI.
Load Rating (lbs.)
No.
14
Thrust plates and ball assemblies may be purchased separately.
16
±.005
INCH
%
?16
'Vl6
>‘/l6
■yi6
11%
1?!6
VU
1%
1%
1%
1%
Static
Speed
Limit
Bearing
Weight
Lbs.
Dynamic
825
3800
4850
8800
6800
6400
5500
5300
4500
4500
3650
3575
3200
.075
.149
.196
.308
.308
.469
.460
.776
.822
1.321
5120
3150
2800
2750
5225
2725
6100
2550
7500
8300
9050
10100
11800
2375
2275
2150
2100
1850
84300
84300
84300
84300
84300
12100
12000
11870
11750
11600
1800
1725
1700
1600
1585
6.190
7.000
7.380
124500
200000
222000
25300
1340
1300
1220
1170
1100
11.250
144000
179000
16300
18850
22200
245000
245000
269000
375000
435000
27100
26800
28000
36500
40200
1020
980
880
790
710
32.000
500000
568000
44100
48300
670
83.000
115.000
23600
580
1.161
1.562
1.625
1.894
2.070
2.570
3.080
3.470
4.630
5.290
8.250
8.380
16.000
21.000
26.000
27.000
35.000
48.000
59.000
63.000
)
)
)
)
)
30 O 32 £■ 9; 3
30 O 3 2. S: 3
oo5^i5
gO?<S.» 2,
>sr 3 3ft
3
>33 C 3 3 O
59(0" 5 o
mgoS0)
(A
^ 3 »
(O
53!
3
● g
to to to
000
toto
lA
o»cn A
X'O
lOM rovoio
<00000
rON>K9K>
O<0
o to
Kd ro Kjra
<00000
0» -O O VI ^
roto po ro h>
(0 <0 (O (O (O
o
COM
o o
K> ro
10
(X> ft)
(O
0 00 0 0
»-49»U>U
(O
zo
e
(O CD <0 (O (£>
00000
o
4koro
A
3 S
5*
9
A
§5-
00
00000
to to
CD VI
to to -i
00000
00000
●
● 000
9>tf1 ^ CO to
O O 00 -o
-i -i
CO o o o
00 0
0 0 0
ss
o
d1
0>O) A CO to
mz
IQ
3C>
? a
<●
O
0)
9 a
GD
3
O
cr
to
A
to
●“
to
to
3
O
OQ(£>
C/>0 CJ)0 C/l
CO 00 CO
O CD 0<J^ O
O) OK/i cn ^
cn ocn Ocn
cn A A
A A A CO CO
coco COM ro
M roto
o co^
O CO
CO ^
A A AU1 cn
COO) CO too
CO ^
O CO
O 0> O) o> *0
<J) Oi -* (D CO
*Nj **«< CO 03 0>
COM O O
to A cn **0
CO o
^ M to
O
Mto
A
ot
to
CO CO A
(O ●><
to coco CO A
^ oco
o
O) *^C0OM
cocn ococo
^CO CO tOfO
o (/I o (Jt to
A CO ** A O)
CO
to
o 00 cn to o
S
^ c;i
030CO
>g GOO
A *>J o
z
o
X
A
*nI
to
A
CO
CO
CO
*sl
»
~
A
I
I
bbb
000
a 3
— a
A <
e
o
OOO)
O A A
O^ ^
MM CO
O COM
0
I
I
00000
00000
00000
03 03
03 03
A A A CO CO
CO **J
COCO A A A
cn CO MO 03
O
cr
1
I
I
bbbbb
I
I
I
I
I
bbbbb
00000
00000
CO O O) O) o
00000
00000
0)0) 0)01 u>
CO pUMM
^ ^ I4 ^ *>g
MM M
91 (J) 010)0
A *>4
A
O) >)< '>4 >4 0D
^OCO 0)0
VICO
CO *><
I
I
I
I
I
00000
00000
00000
VI ft) ^ ^ &
C/ICO
CO o
030 ODCO **●<
CO C7) COM A
I
I
I
I
I
o n
●>< *>JO A A
COOO
O *><030 M
<0
M
OCO
0(/l 00 C/1
coo ’>< *^CT)
o MCO AGO
cncn 01A A
COCO COM M
00 O C^M
->K/1
®
ot
to
●>J 9) 9)
cn 00 oc/i
A A ACO CO
CO CO CO M M
MM
COO) CO
M
C/1
00
C/10
c/1 o
c/1 *>IO o
CO
MM coco A
A*XO*>IO
A 9) *>< O to
M C/10
CO
M A C/1 *0 C/1
●X
COO OCO *>1
COCO (O A M
MM MM M
●><
C/1 C/1 C/l C/1 C/1
M MM MM
M MM 00
® ® CO
3 3^
MM M
b 9) 9)
CO CO CO CO CO
00 o o o o
A A A A A
030 0*X X
9> 9) 9) O O
9)0) 9)*>< ●><
5Mcncjw ®wwwcg
M MM MM
9)03 0) A CO
MM MM M
A A MCO M
to
^01 c;i c^o>
I
CO ●‘J 9)
9) 9>0)***J 01
I
O oto CO (/)
I
I
1
I
I
bbbbb
0 00 0 0
00000
00
^ ^ ^CO
COMC^COtO
05 03 CO
I
I
I
M
I
I
0 00 00
00000
00000
CO ^cn CO
OO)
*>J
A 03
O CO
A </) *><03 O
1
I
I
I
00000
00000
03 O) O) (7) A)
00 00 0
oxncnuicn
M
-
O *0 W
S
CO*>J 0>U)
00 CDOO 0)<0
z
A **0 coo
CO A coo
z
I
I
I
I
bbooo
00000
00000
& A » & »
zjL
A 03 63G3 CO
CO MM MM
Qoo ^
^^6)03
CO *>ic;i CO
Mto
o<o
CO A A c;i c/l
UKTCD
A
C/1 0)9) Q) *><
* CJI w
*>l
0) 03 CD
COOO COO
s
COM
o*>i
M M M
0CJ100 O
0)C/I A CO
00000
M
00
CO o **^
OOC/1 CnM
O C/1 A CO CO
A O C/i *>< C/1
o
coo **o *>< ■><
9) 9) c/1 c/1 c/1
M M
OO)
A *A b A b
9>Mbb *
A AO fO M
^ CO ^ CO 03
^ M M A CO
CO
A 9) ^ O O
CO C/1 AO ^
COCO o *
COC0 9)M O
M CO A A CO
A
O 9) C/l
MO ^cn ●><
OCO M *>< O
M
coco o *>i *x
X 9> o>cn c/1
C/) A CO CO CO
MM
A
bb ^ ^ A
O O
9)
0 9)
o
C/1 ●>< M OM
o) CO o toco
●>gOC/1 A 9>
A COM
Z
aOO
□ 00
Amo
O
A
OCO O
A *slO
*^
CO
0
0 0 0 0 9)
0>9> A A A
A M M M M
s
X *X -sj >4 0)
00 O OCO
^ (OCO COO
</> CO CO CO (0
MMM
OM O CO
—
0) 9) C/1 cn cn
CO CO c/1 cn cn
00
®^3 ? 3
+
A A A A A
^ >g ●><■>< ^
nOO
M MMM M
A c;i C/t
z
Soo
Ez
cocqvkqz
® a
z
& A A. wp>
po & pooca
o
M
O
o
CO CO >4 M
M
OC/l
03 coco ^<0
CO MC/I *>< Q>
00
A
f5S§^
Z:
Ot w
s
Z.1.+
o o
O
.
' O CP *>< c/1
●*oo ocn ●><
COMM
OCO *>!*>< 9)
O) c/1 A A CO
O A OCO 9)
CO C/1 *>l -*
v\ cn
^ ^ ^ CO u
COCOCOPOPO
10 PO
cn
bKobbb
A
cs<Dcn->Po
U)
cnio ro
03 9) A
03 9) C/ICO C/1
o cno A ●><
M
M O
A CO OOC/1
9)0 *>I'*J CD
t/i**J
A O
<0 CO
CO O OD 03 1^
1^ 03 9 GO 03
03 03 00 CO
OD 03
ro PO
PJfO
00
M
COCO COCO O
b
C71
M
10
(O *>< OC/1 o
C0 63 0)0> *><
Q3 CD
§
CD
0 0
Amo
H-
CO O c/1 O CO
CO 00 9)
*
O O COCO
COCOCO *x M
A CO
>
O 3
bCD
b Mb A b A bb b X A bb A
A^ 9>M *><
9>c/l
>
si
-EEM
>
I
0> A
I
MOO
M 9>9)
O COCO
COtO tOMtO
to CO ^ ^ A
00
00
to
COM M
^
wpp
^ (O ^ ^ ^
OD
^cn bb ^ ^M b (O 9>
AM *><
01 ^
M fO —
§W
A
C/I A ACO CO
O C/1 OC/1 O
to
>co
b®
O A
03
C/1 9>0
b ^ b CO
cr O) ^ A CO
O) o 01 o cn
03 CO
>
+ £
& D> & & ^
O 9) 9)
MAM
OCO CO
05
"O o cn
oot
o
*00 CO 9>
>
00000
00000
00000
ft ot
7 ot
to
3
cxococo
tn ocn o y>
cn o
to
a
3
3 v
^ to
o c;i
o
s
s
z-
nob
Voo
Z VI VI
z
o
0)
>
C8
£E-
fio
N3
CD
>
a
(D
o
tt
</)
if if
#1#
H
to
●xcn C/1
MM M
A A A A A
O M M
M^ M9)03
OO O
OOO
0)CO 9>MO
00000
00000
M MM MM
OD CDCO CO
*
M M CO OCO
00000
00000
(0 03 0)01
(0 A ->I(D ->J
VlOU)O(0
00000
(o (0 -si -g ®
-g-gcoW'^i
OOc/iOcj)
00000
^^coropo
000'«**«4
->1 'J O PO PO
00000
(fl
W
R-
0)
0)
e
r
o
o
a
n
a
A CO
A 9)
00
00
00
00
MM-*
—
CD M03 9) C/1
03 MCn M O
00000
00000
00000
<0
O03CD
CO ●>< *>JCDO
00O“«<
'
00000
00000
X c/1 AM M
O) OCO A
05 03 A CO A
00000
00000
(0
M
0 03(0 0) <31
0 0(0
VI
00(00 A
00000
O
o
s
>
to
O
03 9) 9)
A M M
MO *X
C/1O cn
cn 9>cn C/1 cn
9) o >4 cn A
O ocn o A
00000
COCO ACO CO
0>**4
*
●
●
03 A *>JCO 9)
00 cno o
COMM MM
O***J0) 0)0
MCO A O A
00000
03COCJ1 cn cn
CO CO *>J *>l 03
OD X €0
A A MCO M
00000
cn cn ocn o
cn
<
3
to
3
<0
7
to
3
</i A
cn
O) COM M M
03 COOO A
(OCJ
00
00
00000
9) AO
●X
_
00000
M M
CO OCO ^9)
o
A 09)
00000
00000
cnM CO o>cn
O **^ MCDCD
O O 9) 9) O)
00000
A AM
CO C/lC/1 O C/1
CO ACO A C/1
00000
MM
■>«g
MM MMM
A A A cncn
OM *>40 cn
00000
cnco M
M MMM
bb A
bM
cocn
'
MO) CO
M 03Cn O 03
cn MO A o
MCO
M M M coco
OD CO CO CO A
cn o X MO
o ocn cno
9) cn MCO 03
>4
<0 A cn
OOD 03 03 O
COCO A A A
cno o
ocn 00
00000
>4 0)9) cn A
>4 MO OCO
ocno 03 A
A c/icn cn 9>
●*4 CO M
00000
00000
03
coco MM M
CO-® 0)0
●
AOD 0D9)M
>g >4 *>< 03 CD
O A 03 CO 03
00 © 00
00000
Ob
M
O (O CO
cncnoco A
M MM
O 03
00
●XOD COOO
CO
>4*>< A
00000
o
9)
00000
A X
o 9) X o> cn
O ocn O O
O ●><
9) 9)
9) A CO MM
oocn (Ocn
M M
O A CO
CD 9) A M
bb
bob bto
cn CO COCO o
MM cno O
00000
9)9)
3
*0
9
“S5ta
00
o o
00000
00000
z
5*
a
o
to
7
to
3
ft
ft
(O MM
CO OCO
OOO
w
to
M
A (O M
A 9)
b AO bb
O CnM M CO
00000
(D
(/>
CO A C/1 cn
* Acn A A
OOOCOCO
00000
'
zz
0)
00
Sm
nmp
coo A M M
9) A 9> A A
OM O **4 O
0)
<D
</)
(D
Q)
II
<Q
(A
Andrews® Ball Thrust Bearings
3900 series
metric
A-
m
J
metric dimensions
single acting
H
FLAT SEAT
GROOVED RACES
A-
A
B
Bearing
INCH
+.0000
+.005
-.005
INCH
25
.9843
1.1811
-.0004
-.0004
1.189
1.3780
1.5748
1.7717
-.0005
3909
30
35
40
45
3910
3911
3912
3913
3914
50
55
60
65
70
1.9685
2.5591
-.0005
-.0006
-.0006
-.0006
2.7559
3915
3916
3917
3918
75
2.9528
80
3.1496
85
90
95
100
105
110
115
120
Number
tolerance
MM
3905
3906
3907
3908
3919
3920
3921
3922
3923
3924
.992
+.005
-.005
-.002
MM
INCH
MM
INCH
76
2.0472
2.3622
2.6772
2.9921
16
19
22
25
28
.630
.748
.866
.984
1.102
31
33
35
36
38
1.221
1.299
1.378
1.417
1.496
1.614
1.732
1.850
1.969
2.126
52
60
1.386
1.583
1.780
68
85
3.3465
92
112
3.6220
3.9370
4.1732
4.4094
-.0006
1,976
2.173
2.370
2,567
2.764
120
4.7244
2.961
3.157
3.354
3.551
3.748
128
5.0394
5.3543
5.7087
6.1024
6.4961
41
3.3465
3.5433
3.7402
-.0006
-.0006
-.0008
-.0008
-.0008
3.9370
-.0008
4.1339
4.3307
4.5276
4.7244
-.0008
3.945
4.142
4.339
4.535
4.732
6.7716
7.0866
57
60
7.4803
63
7.8740
66
69
2.1654
2.3622
-.0005
-.0005
-.0008
-.0008
-.0008
100
106
136
145
155
165
172
180
190
200
210
8.2677
Dimensions, tolerances and material subject to change.
18
H
+.000
44
47
50
54
2.244
2.362
2.480
2.598
2.717
Ret
Balls
Matl.
No.
Size
Nyl.
12
StI.
12
^16
%
Brn.
12
^16
Brn.
12
Vi
Brn.
12
^16
StI.
12
%
Brn.
12
Brn.
12
2*^2
= ‘/l6
StI.
12
%
StI.
14
%
StI.
14
l?16
Brn.
12
%
Brn.
Brn.
Brn.
12
12
1
Brn.
12
^V6
Brn.
12
12
12
14
VM
Brn.
Brn.
Brn.
‘^16
14
IVie
1%
1%
1%
Load Rating (lbs.)
Static
8320
12000
16300
21300
27000
Speed
Limit
Bearing
Weight
Lbs.
Dynamic
1810
2500
3350
4290
5320
33200
36700
40300
47900
55900
6440
65600
65300
87400
85200
96200
11100
11500
14400
14600
15900
108000
133000
133000
161000
188000
17400
20500
19900
23400
25600
6970
7530
8860
9470
5300
4500
3050
3360
.331
.600
3050
.875
1.200
1.731
2750
2550
2425
2300
2160
2.168
2.531
3.156
3.500
4.250
2000
1875
1750
1650
1525
4.899
6.172
7.593
9.375
11.500
1460
13.125
15.063
17.750
1440
1490
1250
1200
20.250
23.500
Andrews» Ball Thrust Bearings
51100 series
metric
-A
e:
metric dimensions
1
1
single acting
r
z
FLAT SEAT
A-
GROOVED RACES
Ai
A
B
Bearing
Number
MM
INCH
51100
51101
51102
10
.3937
12
.4724
15
51103
17
51104
20
51105
25
51106
30
35
40
45
51107
51108
51109
51110
50
51111
55
51112
60
65
70
51113
51114
51115
75
51116
80
85
90
100
51117
51118
51120
Tolerance
±.010
+.0000
INCH
.5906
.6693
.7874
-.0004
-.0004
-.0004
-.0004
-.0004
.433
.512
.630
.709
.9843
1.1811
1.3780
1.5748
-.0004
-.0004
-.0005
-.0005
1.7717
MM
H
+.000
-.002
INCH
MM
10000
736
717
945
9800
9500
9100
8000
.042
.053
.057
.065
.086
14
6200
16
19
18
%
7100
14
.551
Stl.
Brn.
Stl.
Stl.
Stl.
14
12
13
.433
.433
.472
.512
1310
1370
1310
1750
1820
6900
6500
5900
5300
4900
.128
.168
.197
.305
.320
14
.551
.630
.669
.709
.709
Stl.
Stl.
Stl.
Stl.
Stl.
1900
2160
2750
3020
4800
4200
3850
3650
3550
.401
.513
.634
.698
.781
.748
23
.748
Stl.
Stl.
.748
Brn.
.866
Brn.
25
.984
Stl.
1.022
.939
1.227
1.630
2.094
25
Stl.
30
31
31
.984
.984
1.181
1.220
1.220
31
34
34
37
1.220
1.339
1.339
1.457
Brn.
Brn.
Brn.
28
,827
42
47
1.654
60
-.0005
1.850
65
1.6535
1.8504
2.0866
2.3622
2.5591
11
1.220
1.417
-.0005
-.0006
-.0006
-.0006
-.0006
2.047
2.638
2.835
70
78
85
90
95
2.7559
3.0709
3.3465
3.5433
3.7402
2.9528
3.1496
3.3465
3.5433
3.9370
-.0006
3.031
100
-.0006
3.228
105
-.0008
-.0008
-.0008
3.465
3.661
4.055
110
120
135
3.9370
4.1339
4.3307
4,7244
5,3150
19
19
19
22
4.3307
-.0008
-.0008
-.0010
-.0010
-.0010
4.449
4.843
5.236
5.630
6.024
145
155
170
51128
140
51130
150
5.1181
5.5118
5.9055
51132
51134
51136
51138
160
170
180
190
6.2992
6.6929
7.0866
7.4803
-.0010
-.0010
-.0010
-.0012
6.417
6.811
7.205
51140
200
7.8740
51144
220
240
8.6614
9.4488
260
10.2362
180
6.6929
7.0866
190
7.4803
7.8740
7.598
200
215
225
240
-.0012
7.992
250
8.780
9.567
270
300
10.354
320
11.142
350
8.4646
8.8583
9.4488
9.8425
11
16
17
18
18
25
Brn.
Brn.
Stl.
Stl.
Brn.
7540
%2
10100
11200
22
%2
12350
20
Vl6
“^2
13850
20
22
20
22
%
28
■>A2
“/32
28
24
24
>%2
Vi
18450
19950
22000
3210
3040
2950
3680
5500
3330
49750
49750
58500
5950
5820
6920
7120
7700
2420
2330
2050
1950
1880
7500
8820
9070
10900
1830
1680
1660
1520
28
28
26
28
32
1^
32
30
^6
72000
%
83000
'/i
^16
^16
^16
63000
72000
3300
3200
2840
2500
2.282
2.766
4.406
4.737
5.094
5.300
7.000
7.460
9.500
9.535
37
1.457
Brn.
30
11300
1500
10.6299
11.8110
12.5984
13.7795
14.9606
37
1.457
1.772
Brn.
Brn.
117000
151000
161000
213000
269500
11450
14900
15250
20600
24300
1450
10.200
1300
17.250
17.800
26.000
38.600
15.7480
63
64
65
300300
300300
332800
26200
25100
27200
51156
280 11.0236
51160
300 11.8110
-.0014
11.929
380
51164
51168
320
340
360
-.0014
-.0014
12.716
13.503
400
420
16.5354
-.0014
14.291
440
17.3228
45
45
53
62
32
3150
23000
23400
23400
28200
42500
88750
102500
110000
-.0012
-.0012
-.0014
-.0014
12.5984
13.3858
14.1732
Lbs.
Dynamic
675
1.024
4.7244
Static
Bearing
Weight
600
9
9
10
5.7087
6.1024
Size
Limit
2000
2500
3000
3000
4075
1.1024
1.1811
1.3780
2.441
No.
Speed
Vl6
yi6
yi6
^6
9
2.244
INCH
Load Rating (lbs.)
8
10
12
12
12
9
1.9685
2.1654
2.3622
2.5591
2.7559
Balls
Stl.
Brn.
Brn.
Brn.
Stl,
.9449
1.0236
53
Ret.
Matl.
.354
.354
.354
.354
.394
24
110
120
130
51172
+.005
-.005
26
28
30
35
51122
51124
51126
51148
51152
H
1.772
Brn.
2.087
2.441
Brn.
Brn.
32
30
32
30
30
2.480
2.520
Brn.
30
Brn.
30
ni6
1^16
2.559
Brn.
30
1‘/4
2%2
2%2
1
life
1280
1270
1250
1240
1230
1220
41.700
44.800
48.100
Thrust plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
19
Andrews^ Ball Thrust Bearings
DL & DM series
metric
metric dimensions
A-
single acting
I
FLAT SEAT
H
GROOVED RACES
●A’
A
B
Bearing
H
+.000
Number
DL-12
12
DL-15
15
Ret.
Matl.
INCH
-.0000
MM
.4803
.5985
.6772
.7953
.9922
+.0008
+.0008
+.0008
+.0008
+.0008
23
26
28
39
45
.906
1.024
1.102
1.535
1,772
9.0
9.0
9.5
13.2
14.0
.354
.354
.374
StI.
StI.
StI.
10
+.0004
+.0004
+.0004
+.0004
.520
StI.
.551
15.5
17.3
19.0
22.5
.610
24.5
.965
INCH
-.0000
+.0004
Tolerance
MM
Load Rating
(lbs.)
Bails
-.002
INCH
Iblerance
MM
+.005
-.005
INCH
No.
Size
1730
470
10000
10000
14
yi6
StI.
12
V4
2080
3500
5320
510
490
780
1160
14
%
.681
StI,
StI.
14
.748
StI.
14
5/16
5/16
.886
StI.
StI.
17
%
16
Vl6
9700
9700
16900
13900
1850
1910
1860
2970
2530
5300
4800
4300
3650
3325
1.30
7i6
yi6
19000
24400
28400
33700
35500
3370
3860
4640
5150
5220
2975
2700
2550
2500
2425
1.47
2.22
2,00
2,38
2.50
40500
6150
6020
7360
7270
8730
2325
2240
2050
1980
1800
2.78
17
DL-20
20
.7874
DL-25
25
.9843
DL-30
1.1811
1.3780
+.0004
1.1890
+ .0008
53
DL-35
30
35
+.0005
1.3859
+.0010
57
DL<40
40
1.5748
+.0005
DL-45
45
1.7717
DL'SO
50
1.9685
+.0005
+.0005
1.5827
1.7796
1.9764
+.0010
+.0010
+.0010
64
72
80
2.087
2.244
2.520
2.835
3.150
DL-55
2,1654
3.465
3.858
4,055
4.252
4.409
14
1.201
18
1.240
StI.
StI.
1.260
StI.
19
+ .0006
88
98
103
108
112
Brn.
75 2.9528
+.0012
+.0012
+.0012
+.0012
+.0012
28.0
30.5
31.5
32.0
DL-75
2.1733
2.3701
2.5670
2.7638
2.9607
1,102
DL-70
55
60
65
70
32.5
1.280
StI.
20
DL-80
+.0012
+.0016
+.0016
+.0016
+.0016
34.0
34.0
1.339
StI.
18
9/16
1.339
134
5.276
38.0
140
154
5.512
6.063
38.0
1.496
1.496
1.634
StI.
StI.
StI.
18
18
19
18
%
%
95 3.7402
3.1575
3.4650
3.5512
3.7481
3.9449
4.646
4.921
DL-95
+ .0006
+ .0008
+.0008
+.0008
+.0008
118
125
DL-90
80 3.1496
85 3.3465
90 3.5433
DL-8S
DL-100
2.3622
2.5591
2.7559
100 3.9370
+.0006
41.5
Brn.
12
12
9000
16
’/2
40500
49900
■Vl6 49900
■Vl6 60400
metric dimensions
9400
6800
5000
GROOVED RACES
-A'
A^
A
Number
Tolerance
INCH
.5906
.6693
.7874
.9843
+.000
-.002
Tolerance
+.005
Ret.
-.005
Matl.
INCH
MM
INCH
No.
15.5
19.0
19.0
22.0
.610
Brn,
9
,748
Brn.
8
.748
Stl.
.866
Nyl.
24.5
.965
Stl.
12
24,5
28.0
.965
Stl.
1.102
Brn.
14
12
INCH
-.0000
+.0004
+.0004
+.0004
+.0004
+.0004
.5985
+.0008
35
1.378
.6772
.7953
39
1.535
1.1890
+.0008
+.0008
+.0008
+.0008
43
53
62
1.693
2,087
2.441
+.0010
+.0010
68
75
80
2.677
2.953
3.150
28.0
1.102
Stl.
16
7i6
85
3.346
3.740
31.5
35.0
1.240
1.378
Stl.
16
Stl.
18
7/16
7/16
3075
1.34
2850
24400
3950
2550
1.65
2.44
16
28400
12
2350
2125
2040
2000
16
%
64000
4640
7300
7970
7880
10200
3.87
4.00
14
14
"/16 40300
'l/l6 47000
■Vl6 47000
1800
4.81
5.94
Brn.
16
%
Brn.
14
64000
76000
76000
99000
10000
12300
12100
15700
1825
1590
1575
1475
10.62
13.00
15.60
DM-45
45
1.7717
+.0005
1.7796
DM-50
50 1.9685
55 2.1654
+.0005
1.9764
+ .0010
+ .0010
+.0006
2.1733
+.0012
95
60 2,3622
65 2.5591
70 2,7559
75 2.9528
80 3.1496
+.0006
+.0006
+.0006
2.3701
2.5670
2.7632
+ .0012
+.0012
+.0012
103
4.055
38.0
1.496
Stl.
112
4.409
41,5
Brn.
122
4,803
41.5
1.634
1.634
+.0006
2.9607
+ .0012
125
41.5
1.634
Brn,
Brn,
+.0006
3.1575
+.0012
134
4.921
5.276
45.0
1.772
Brn.
DM-85
85 3.3465
3.3544
3,5512
3.7481
3.9449
+.0016
+.0016
+.0016
+.0016
5,512
45.0
90 3.5433
95 3.7402
+.0008
+.0008
+.0008
+.0008
140
DM-90
DM-95
158
6.221
1.772
2.047
164
176
6.457
6.929
52.0
52.0
Dimensions, tolerances and material subject to change.
Lbs.
Dynamic
3760
1.5827
Thrust plates and ball assemblies may be purchased separately.
Weight
3760
1.3859
+.0005
55.5
Limit
Bearing
21700
1.3780
1.5748
5050
Speed
1.13
35
40
+.0005
DM-40
100 3,9370
Static
J
3575
3275
1.1811
.9922
(lbs.)
H
2280
3260
20
25
30
DM-100
5.37
11900
16300
21700
DM-20
DM-25
OM-80
3.97
4.60
6400
5500
5300
4300
3760
17
DM-70
DM'75
3.38
1260
1540
1200
1800
2500
15
DM-65
Size
-.0000
DM-17
DM-60
Load Rating
Bails
MM
DM-15
DM-55
20
H
B
Bearing
DM-35
.28
.34
.50
.75
I
FLAT SEAT
DM-30
,03
.03
.03
.12
.19
B
A
r
single acting
MM
Lbs.
Dynamic
2080
DL-17
DL-60
DL-65
Weight
Limit
%2
.4724
.5906
.6693
+.0006
+.0006
+ .0006
Static
Bearing
Speed
^16
5550
12
V4
12
5/16
5330
8340
11900
2.047
Brn.
14
2.185
Brn.
14
%
Vl6
%
1
.16
.22
.28
.50
.75
.81
4.47
8.25
Andrews^ Ball Thrust Bearings
1900 series
metric
B-A-
0
metric dimensions
1
double acting
H
A
FLAT SEAT
2
GROOVED RACES
A
A
B
Bearing
Number
MM
INCH
H
+.000
Tolerance
-.005
-.002
+.010
-.010
+.0000
INCH
MM
INCH
INCH
INCH
.598
.795
.992
1.189
1.583
35
40
48
53
64
1.3780
.984
1.5748
.984
.197
.197
1.8898
2.0866
2.5187
1.102
.217
Nyl.
Nyl.
1.102
.249
.256
StI.
StI.
1.780
1.976
2.173
2.370
2.764
73
2.8740
78
3.0709
1.496
1.516
88
3.4646
1.732
90
3.5433
103
4.0551
1.673
1.890
.276
.276
.335
.335
.394
StI.
StI.
StI.
StI.
StI.
110
115
125
4.3307
4.5276
4.9213
1.890
2.028
2.205
5.3150 2.264
5.5118 2.382
.394
.433
.472
StI.
StI.
StI.
Brn.
Stl.
20
\z
18
Vis
16
19
“/is
“As
5.9055
6.1024
.492
.551
.669
.689
.748
Stl.
Stl.
16
%
17
Brn.
Brn.
Brn.
18
18
18
‘Vis
1
Vis
‘Vis
‘Vis
.864
Stl.
20
‘Vis
1902
10
1904
15
1905
20
1906
25
.3937
.5906
.7874
.9843
1908
30
1.1811
-.0008
-.0008
-.0008
-.0008
-.0008
1909
1912
35
40
45
50
1914
55
1.3780
1.5748
1.7717
1.9685
2.1654
-.0010
-.0010
-.0010
-.0010
-.0012
1915
1916
2.961
-.0012
3.157
1918
75
1919
80
2.3622
2.5591
2.7559
2.9528
3.1496
-.0012
1917
60
65
70
-.0012
-.0012
-.0012
3.354
3.551
3.748
140
1920
3.945
150
110
6.4961
6.8898
110
4.142
4.535
4.929
5.126
175
1926
-.0015
-.0015
-.0015
-.0015
155
1925
3.3465
3.5433
3.9370
4.3307
4.3307
-.0015
1923
85
90
100
180
7.0870
2.402
2.835
3.051
3.209
3.740
1928
120
4.7244
-.0015
5.520
200
7.8740
3.681
1910
1911
1921
Ret.
+.005
135
165
1.260
Balls
Matl.
.472
.492
StI.
No.
Size
9
10
12
13
14
%2
%2
^!6
Vis
%
16
= %2
16
Vis
16
Vz
18
Vis
19
18
Load Rating (lbs.)
Static
5000
5600
6900
9000
14000
Speed
Limit
Bearing
Weight
Lbs.
Dynamic
1355
1660
1845
2680
5100
4800
4100
3850
3250
.251
.351
.553
.551
.845
18800
21700
23400
24400
33700
3290
3800
4850
3900
5120
2850
2700
2350
2400
2075
1.345
1.640
2.490
2.040
3.030
35500
40500
49800
5225
6100
7500
3.400
3.900
53500
8300
63600
9050
2000
1875
1775
1650
1575
68000
79500
84300
10100
11800
12000
9.070
10.240
13.750
14.300
15.500
16.740
1380
84300
11750
84300
11600
1515
1375
1280
1210
1585
124500
16300
1140
4.760
6.100
7.040
Thrust Plates and ball assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
21
Andrews^ Ball Thrust Bearings
500 & 500AW series metric
BBmetric dimensions
3
single acting
SELF ALIGNING
GROOVED RACES
H
A-
A
Tolerance
+.005
-.005
INCH
+.0000
INCH
MM
.5906
.6693
.7874
.9843
1.1811
-.0004
.669
.748
35
37
1.378
-.0004
-.0004
-.0004
-.0004
1.457
1.772
2.283
2.520
Number
MM
502
15
503
17
504
20
25
30
505
506
507
35
1.3780
508
40
1.5748
509
45
1.7717
510
50
511
512
.866
45
1.063
58
1.260
64
1.457
72
1.654
85
1.850
95
-.0005
2.047
110
55
1.9685
2.1654
-.0006
2.283
120
60
2.3622
65
514
70
2.874
150
515
75
3.071
160
516
80
2.5591
2.7559
2.9528
3.1496
2.480
2.677
130
513
-.0006
-.0006
-.0006
-.0006
-.0006
3.268
170
520
85
90
100
523
115
525
125
518
528
140
3.3465
3.5433
3.9370
4.5276
4.9213
5.5118
-.0008
-.0008
-.0008
-.0008
-.0010
-.0010
140
-.002
MAX.
INCH
INCH
2
A'
B-
20
20
.787
.787
.945
1.181
1.339
8
8
8
8
8
Vl6
1.575
1.890
2.480
2.717
30
34
8
8
8
8
8
1^6
95
100
3.740
8
1%
3.937
8
8.465
9.449
10.630 11.181
110
8
9
130
4.331
4.724
5.118
1‘Vl6
2
2'k
g
11.811
140
5.512
9
5.472
5.827
6.260
6.575
7.146
68
7.087
190
7.480
4.055
215
4.646
240
5.039
270
7.402
7.717
8.819
9.961
12.402
50
56
64
74
80
86
90
120
m
1%
VM
1^16
5700
5500
4600
3600
3200
1.15
5860
2800
2375
2100
1850
1660
1.60
2.55
3.55
5.50
8.00
1525
1440
1325
1260
1170
9.80
12.20
15.30
19.00
22.80
1100
1050
26.50
30.00
43.60
58.25
6860
9260
12700
15000
16000
17100
19600
20800
23400
2%
2%
440000
51900
26100
33400
38600
45300
900
810
715
640
1.752
5.5
.217
1.752
5.5
.217
1.969
2.480
2.795
6
INCH
502AW
22
22
44.5
504AW
30
50
505AW
41
506AW
46
.866
.866
1.181
1.614
1.811
44.5
503AW
507AW
51
508AW
509AW
60
66
2.008
2.362
2.598
79
95
111
510AW
77
3.031
511 AW
82
512AW
513AW
93
93
514AW
103
51 SAW
516AW
113
7.5
8
.22
.25
.39
.90
80.66
107.00
WASHER
MM
MM
Lbs.
1550
1840
2590
4540
4930
24700
+.005
-.005
INCH
INCH
Bearing
Weight
Dynamic
150000
162000
227000
288000
360000
+.010
-.010
WEIGHT
Lbs.
MM
INCH
.236
.295
.315
22
22
26
32
36
.866
.866
1.024
1.260
1.417
.07
.09
.09
.17
.23
41
1.614
1.850
.33
.58
10.5
11.5
.354
.413
.453
47
53
2.087
.96
127
3.110
3.740
4.370
5.000
13
.512
59
2.323
1.36
3.228
142
5.591
14
.551
67
2.638
1.98
3.661
150
5.906
14
3.661
158
15.5
16
84
2.795
3.031
3.307
2.02
2.47
3.75
4.449
180
190
6.220
7.087
71
77
4.055
.551
.610
.630
7.480
16
.630
90
3.543
4.00
122
4.803
200
7.874
17
.669
94
3.701
4.55
S17AW
125
4.921
210
51 SAW
128
222
20
21
3.937
4.094
152
174.5
254
10.000
22.5
114
4.488
523AW
6.870
275
25
125
4.921
6.00
7.05
9.60
11.93
525AW
195.5
7.697
310
10.827
12.205
27
.787
.827
.886
.984
1.063
100
104
520AW
5.039
5.984
8.268
8.740
136
5.315
16.00
528AW
225
8.858
340
13.386
27
1.063
145
5.709
18.00
9
Dimensions, tolerances and material subject to change.
22
Limit
H2
MM
71
80100
88700
107000
117000
139000
1V4
-.002
63
24400
29300
40400
56800
71800
1
+.000
+.010
-.010
9390
18000
20000
21/^2
2^2
2%2
B^
A2
5540
?/l6
^6
2.677
2.913
3.150
3.386
3.543
5.118
5.512
5.906
6.299
6.693
44
Static
6700
8
8
8
8
8
180
H'
1.457
1.496
1.732
1.969
2.205
2.520
NUMBER
K
Size
38
WASHER
)i
No.
3.031
3.386
3.858
4.488
5.039
3.661
300
INCH
24
Speed
Load Rating (lbs.)
Balls
MM
2.835
3.347
3.740
4.331
4.724
3.465
5.630
+.005
-.005
+.000
-.0005
-.0005
-.0005
517
H
B
Bearing
Andrews® Ball Thrust Bearings
metric 3700 & 3700AW series
B
-A
P
metric dimensions
single acting
H
SELF ALIGNING
2
GROOVED RACES
A’
B
A
Bearing
+.005
Number
MM
INCH
-.002
Iblerance
-.005
+.0000
INCH
MM
-.0004
-.0004
-.0005
-.0005
-.0005
1.024
1.259
1.457
1.654
52
60
68
76
1.850
-.0005
-.0006
-.0006
-.0006
2.047
2.244
2.441
INCH
MM
19
21
85
2,0472
2.3622
2.6772
2.9921
3.3465
92
100
106
3.6220
3.9370
4.1732
2.638
112
-.0006
2.835
3705
25
.9843
3706
30
3707
35
3708
3709
40
45
1.1811
1.3780
1.5748
1.7717
3710
3711
50
3712
60
3713
3714
65
70
1.9685
2.1654
2.3622
2.5591
2.7559
3715
3716
3717
3718
3720
75
80
85
90
100
2.9528
3.1496
3.3465
3.5433
3.9370
-.0006
-.0006
-.0008
-.0008
-.0008
3722
110
3724
120
4.3307
4.7244
-.0008
-.0008
55
H
+.000
MM
40
45
3707AW
3708AW
3709AW
^16
8320
1810
12000
2500
7/lS
16300
^6
21300
27000
3350
4290
5320
%
33200
33
1.299
StI.
35
37
1,378
Brn.
12
12
36700
1,457
Brn.
12
21^2
»/l6
4.4094
38
1.496
Brn.
12
%
120
4.7244
40
1.575
Brn.
14
%
3.032
3.228
128
5.0394
43
46
Brn.
14
12
%
3.465
145
14
155
Brn.
172
6.7716
Brn.
12
12
1
4.055
49
52
59
Brn.
3.661
5.3543
5.7087
6.1024
1.693
1.811
1.929
2.047
2.323
StI.
136
4.528
4.921
190
210
7.4803
8.2677
65
72
2.560
2.835
Brn.
12
IV*
Brn.
14
1%
-.002
Brn.
Brn.
W
+.005
+.000
-.005
MM
1.575
1.772
55
2.165
65
2.559
.295
.315
22
24
55
2.165
75
.315
27
60
65
2.362
85
95
2.953
3.346
3.740
7.5
8
8
8.5
9.5
.335
30
33
371OAW
75
3.937
9.5
.374
110
3.346
115
371 SAW
80
85
90
2.953
3.150
100
3711 AW
120
3714AW
95
3.543
3.740
4.331
4.528
4.724
130
371 SAW
3716AW
3717AW
371SAW
3720AW
105
4.134
110
120
125
3722AW
3724AW
155
170
140
12
30
INCH
3712AW
Nyl.
.374
+.010
-.010
INCH
'^6
>?16
IVfe
.12
.19
.22
.34
.40
.50
.433
36
39
1.417
11
1.535
11
.433
41
.68
.71
11.5
12
.453
.472
42
5.118
44
1.614
1.653
1.732
5.512
12
1.850
5.709
4.724
155
6.102
13
13
4.921
5.512
165
185
6.496
15
.472
.512
.512
.591
47
4.331
140
145
7.283
16.5
6.102
205
8.071
17
6.693
225
8.858
19
Bearing
Weight
Lbs.
.39
.53
.80
1.10
1.50
2.00
2.40
4.70
5.60
6.75
40300
47900
55900
7530
8860
9470
65600
65300
87400
85200
108000
11100
11500
14400
14600
17400
1975
1825
1725
1625
1450
12.10
133000
188000
19900
25600
1290
1170
16.00
21.50
I
6440
6970
4800
4200
3650
3375
2900
I
2.80
3.12
3.70
8.10
-i
j.
A2
.75
.99
50
1.969
1.08
1.15
54
2.126
1.39
57
2.244
.650
64
2.520
1.80
2.40
.669
.748
70
2.756
3.071
78
Limit
2650
2470
2350
2250
2100
WASHER
WEIGHT
Lbs.
.866
.945
1.063
1.181
1.299
Speed
Dynamic
Static
12
12
12
27
MM
2.559
Size
Brn.
24
INCH
3706AW
No.
12
MM
3705AW
Load Rating (lbs.)
Balls
StI.
H2
+.010
-.010
INCH
NUMBER
Ret
Matl.
.748
.827
.945
1.063
1.181
A2
WASHER
+.005
-.005
INCH
3.15
4.28
Dimensions, tolerances and material subject to change.
23
Andrews« Ball Thrust Bearings
4100 series
metric
6
A
metric dimensions
single acting
H
SELF ALIGNING
t
GROOVED RACES
A
Tolerance
+.010
-.010
INCH
+.0000
INCH
MM
.3937
.5906
.7874
.9843
.472
.669
.866
1.063
1.260
25
35
40
48
53
2.087
62
64
73
78
88
2.441
3.543
Number
MM
4100
4102
4104
H
B
Bearing
+.000
-.002
INCH
-.005
1.890
17
Nyl.
Nyl.
18
21
21
25
25
28
.827
.827
.984
.984
1.102
Stl.
Stl.
Stl.
Stl.
Stl.
16
16
16
28
32
32
32
35
1.102
1.260
1.260
1.260
1.378
Stl.
Stl.
Stl.
Stl.
Stl.
18
16
19
20
18
5.315
38
38
5.512
41
5.906
41
46
1.496
1.496
1.614
1.614
1.811
Stl.
Brn.
Stl.
Stl.
Stl.
18
16
19
16
17
1.811
Brn.
18
1.929
1.929
2.086
2.086
Stl.
18
Brn.
20
Stl.
20
18
4108
40
4109
4110
45
50
-.0005
-.0005
-.0005
-.0005
1.457
1.654
1.850
2.047
4111
55
2.1654
-.0006
2.244
4112
60
4113
65
4114
70
2.3622
2.5591
2.7559
-.0006
-.0006
-.0006
2.441
2.638
2.835
4115
75
2.9528
-.0006
3.032
4116
80
3.1496
-.0006
3.228
90
100
103
110
115
4117
85
90
125
135
140
150
155
4.921
2.520
2.874
3.071
3.465
3.937
4.055
4.331
4.528
4119
95
3.3465
3.5433
3.7402
4120
100
3.9370
-.0008
-.0008
-.0008
-.0008
4121
105
4.1339
-.0008
3.465
3.662
3.858
4.055
4.252
4122
110
4.3307
-.0008
4.449
160
6.299
4123
115
4.5276
-.0008
4.646
6.496
4124
120
125
130
4.7244
-.0008
-.0010
-.0010
4.843
165
170
175
6.890
46
49
49
53
180
7.087
53
5.5118
5.9055
6.2992
6.6929
180
7.0866
5.630
6.063
6.457
6.850
7.244
235
250
260
7.874
8.661
9.252
9.843
10.236
60
60
65
4136
-.0010
-.0010
-.0010
-.0010
-.0010
200
4134
140
150
160
170
4138
190
7.4803
-.0012
7.638
275
10.827
4140
200
7.8740
-.0012
8.032
290
11.417
4132
12000
14000
18800
21700
28400
1.575
1.3780
1.5748
1.7717
1.9685
220
825
1355
1380
1660
1845
StI.
1.1811
4130
2700
5000
5600
6900
9000
Brn.
.591
.630
.669
.709
35
4128
%2
%2
%2
^16
¥i6
.551
30
4126
8
9
10
12
13
14
15
16
4107
5.039
5.236
Size
.984
4106
6.102
6.693
Dimensions, tolerances and material subject to change.
2.362
2.362
Stl.
Brn.
Stl.
12
14
Static
Speed
Limit
Bearing
Weight
Lbs.
Dynamic
8300
6800
.080
.150
5900
.202
5300
4900
.309
.332
2490
2680
3290
3800
4850
4120
4180
3500
3325
2975
.530
.488
24400
28400
33700
35500
40500
3900
4650
5120
5225
6100
2900
2600
2550
2475
2300
1.793
2.037
2.312
7500
8300
9050
10100
11800
2125
2050
3.001
3.630
1940
>?16
49800
53500
63600
68000
79500
4.013
4.860
5.890
'¥.6
●3/16
'^16
'^16
‘^16
84300
84300
84300
84300
84300
12100
12000
11870
11750
11600
1700
1600
1580
1500
1480
'Vl6
1Vl6
124500
144000
179000
200000
222000
15300
18850
22200
23600
25300
1460
1250
1170
1080
1050
12.300
19.290
21.630
23.000
25.300
245000
245000
27100
26800
950
29.700
900
31.900
%
%
>%2
Vl6
Vi
^/16
Vi
Vi
'/t
V.6
"/16
"/16
Brn.
70
2.559
2.756
20
18
20
Brn.
20
1Vl6
70
2.756
Brn.
20
Vk
80
3.150
80
3.150
Brn.
Brn.
20
20
1%
Brn.
Load Rating (lbs.)
No.
1.378
4105
4.9213
5.1181
Bails
INCH
-.0004
-.0004
-.0004
-.0004
-.0004
4125
Ret.
Mati.
MM
10
15
20
25
4118
24
+.005
1’-^
1Vi6
1850
1725
.782
.852
1.366
1.225
1.750
6.820
6.830
8.010
8.100
9.410
Andrews* Ball Thrust Bearings
4100AW series
metric
r
i
metric dimensions
H
I
single acting
r
SELF AUGNING
A*-
GROOVED RACES
B
A2
WASHER
H2
+.010
NUMBER
+.000
-.002
-.010
INCH
W
+.005
-.005
MM
+.010
-.010
MM
INCH
MM
INCH
MM
4100AW
14
19
4104AW
25
4105AW
1.378
1.496
1.772
1.969
2.323
3.5
5
5.5
6
.138
.197
.217
.236
4106 AW
32
42.5
35
38
45
50
59
15
4102AW
.551
.748
.984
1.260
1.673
6
.236
4107AW
43
4108 AW
48
4111AW
53
58
64
67
69
78
83
94
2.638
2.717
3,071
3.268
3.701
7
7
8
8
8
.276
.276
,315
.315
.315
23
23
4109 AW
1.693
1.890
2.087
2.283
2.520
4112AW
69
2.717
411SAW
74
2.913
4114AW
79
411SAW
84
114
3.780
4.134
4.291
4,488
8
9
9
10
89
124
4.882
10
.315
.354
.354
.394
.394
30
34
34
34
4116AW
3.110
3.307
3.504
96
105
109
4117AW
96
3.780
138
4118AW
106.7
4.200
141
4119AW
4.213
4.409
151
10.5
10.5
12.5
4120AW
107
112
5.433
5.551
5.945
156
6,142
4121 AW
118
4.646
163
6.417
4122AW
125
128
137
139
145
4.921
5.039
5,394
5.472
5.709
170
173
180
186
190
4128AW
4130AW
155
6.102
182
7.165
4132AW
180
4134AW
190
4136AW
WASHER
WEIGHT
Lbs.
INCH
.591
.669
.709
.748
.787
.030
.050
.075
.069
.906
.906
1.063
1.063
1.181
.155
.307
.418
37
1.181
1.339
1.339
1.339
1.457
.413
40
1.575
.950
.413
40
,492
43.5
13
.512
44
14
.551
49
1.575
1,713
1.732
1.929
1.231
1.450
1.630
6.693
6.811
14
.551
49
1.929
1.750
14
.551
52
2.047
7.087
14
.551
52
2.047
7.323
14
.551
56
7.480
14
.551
56
2.205
2.205
1.800
1.830
2.020
2.030
212
8.346
15.5
220
8.661
16
.610
.630
62
65
2.441
2.559
7.087
7.480
235
9.252
18
.709
70
2.756
250
9.843
20
202
7.953
260
10,236
19
.787
.748
75
75
2.953
2.953
4138AW
213
275
290
24
.945
86
3.386
224
8.386
8.819
10.827
4140AW
11.417
22
.866
86
3.386
4110AW
4123AW
4124AW
4125AW
4126AW
17
18
19
20
27
27
30
.130
.153
.236
.257
.306
.415
.420
.656
.765
3.060
5.500
5.500
5.500
6.600
6.600
6.600
Dimensions, tolerances and material subject to change.
25
Andrews® Ball Thrust Bearings
800 & 800AW series metric
B
metric dimensions
a
double acting
i
SELF ALIGNING
w
H
GROOVED RACES
tr —A
.w
-A-
+.000
-.002
±.010
Number
Tolerance
INCH
+.0000
INCH
MM
.3937
.5906
.7874
-.0008
-.0008
.9843
30 1.1811
-.0008
.669
.866
1.063
1.260
1.654
35 1.3780
-.0010
40 1.5748
-.0010
45 1.7717
50 1.9685
55 2.1654
-.0010
-.0010
-.0012
818
819
60
65
70
75
80
2.3622
2.5591
2.7559
2.9528
3.1496
-.0012
-.0012
-.0012
-.0012
-.0012
820
821
823
825
828
85
90
100
110
120
3.3465
3.5433
3.9370
4.3307
4.7244
-.0015
-.0015
-.0015
-.0015
-.0015
MM
10
15
802
804
805
20
806
25
808
809
810
811
812
814
815
816
817
-.0008
-.0008
+.005
-.005
MM
Load Rating (lbs.)
No.
Size
27
.197
.197
.217
.249
.256
9
29
31
33
38
1.063
1.142
1.221
1.299
1.496
Nyl.
40
Nyl.
Nyl.
10
Stl.
Stl.
13
%2
%2
^6
Vl6
14
1.732
44.5 1.752
51
2.006
49.5 1.947
58
2.284
.276
.275
.335
.335
.394
Stl.
Stl.
Brn.
Stl.
Stl.
16
16
16
18
2.835
73 2.8740
78 3.0709
88 3.4646
90 3.5433
103 4.0551
19
3.032
3.228
3.465
3.662
3.858
110
115
125
135
140
4.3307
4.5276
4.9213
5.3150
5.5118
58
2.284 .394
63.5 2.500 .433
71
2.795 .472
72.5 2.854 .472
77.5 3.050 .492
Stl.
Stl.
Stl.
20
4.055
4.252
4.646
5.039
5.630
150
155
165
175
200
5.9055
78
6.1024
84
6.4961
89.5
6.8898
94.5
7.8740 104.5
2.441
1.3780
1.5748
48 1.8898
53 2.0866
64 2.5197
44
3.071 .492
3.307 .551
3.528 .669
3.719 .689
4.311 .847
H2
+.000
-.002
INCH
MM
INCH
MM
.748
38
1.496
5.0
45
1.772
19
25
805AW
32
.984
1.260
50
1.969
5.5
6.0
806AW
42.5
1.673
59
2.323
6.0
808AW
48
1.890
69
2.717
7.0
809AW
53
2.087
78
3.071
8.0
810AW
58
2.283
64
2.520
812AW
814AW
69
79
2.717
3.268
3.701
3.780
8.0
811AW
83
94
96
3.110
109
4.291
9.0
81 SAW
84
3.307
114
816AW
89
3.504
124
4.488
4.882
10.0
10.0
817AW
3.780
138
5.433
10.5
3.976
4.213
141
151
5.551
5.945
10.5
81 SAW
96
101
107
820AW
112
4.409
156
6.142
821 AW
823AW
118
4.646
163
6.417
825AW
128
139
5.039
5.472
173
186
828AW
155
6.102
212
6.811
7.323
8.346
13.0
14.0
14.0
14.0
15.5
8.0
8.0
12.5
Dimensions, tolerances and material subject to change.
26
Balls
35
804AW
818AW
Ret.
Matl.
INCH
+.010
-.010
NUMBER
h
MM
1.850
2.047
2.244
INCH
A2
WASHER
802AW
H
B
A
Bearing
12
18
Brn.
18
16
Stl.
%
1355
1380
1660
1845
2680
‘%2
^'16
18800
21700
%
28400
^^6
24400
It!
33700
3290
3800
4850
3900
5120
?I6
35500
40500
49800
19
Stl.
16
%
Stl.
Stl.
Stl.
17
'^16
'^16
'^6
■Vl6
Brn.
18
20
W
1875
84300
124500
11750
1120
16300
960
Lbs.
.197
.217
.236
.236
.276
31
33
35
37
42
1.221
1.299
1.378
1.457
1.654
.050
.075
.069
.130
.153
.315
.315
.315
.315
.354
48
48.5
55
53.5
62
1.890
1.909
.236
.257
2.165
.306
2.106
.307
.415
.394
.394
.413
.413
.492
62
2.441
67.5
2.657
75
2.953
3.012
3.248
.512
84
90
95.5
100.5
3.307
110.5
4.547
3.764
3.955
2.580
2.170
3.370
2200
1260
MM
.551
.551
.610
2175
10100
11800
12000
INCH
3.543
1.357
68000
79500
84300
WEIGHT
.420
.656
.950
.764
1.270
2.000
2.750
3.500
4.500
5.500
.250
.363
.555
.599
.901
1.701
53500
63600
-.010
INCH
Lbs.
2600
1800
WASHER
Bearing
Weight
2350
1700
-.005
.551
4300
3850
3575
3000
6100
7500
8300
9050
+.010
76.5
82.5
4800
5225
+.005
2.441
Limit
Dynamic
5000
5600
6900
9000
14000
‘■As
■Vl6
18
Static
Speed
1525
1460
1430
1400
1180
3.800
4.400
5.830
7.200
9.250
10.000
10.500
13.500
17.000
22.000
Andrews« Roller Thrust Bearings
RTL series
a
B
i
H T
KX NT
i_LS
b
D
RTL
inch
dimension
H
BEARING
NUMBER
LOAD RATING (Ibs)
Tolerance
+.000
B
D
LIGHT
RTL- 7
RTL- 8
.875
.938
1,844
1.844
.625
.625
SECTION
RTL- 9
RTL-10
1.000
1.063
.625
.625
RTL-11
1.125
1,969
1,969
2.094
RTL-12
1.188
RTL-13
1,250
RTL-14
1.313
1.375
1.438
2.094
2.344
2.344
.625
.625
.625
.625
.625
-.005
-.005
-.005
-.005
.625
.625
.813
-.005
-.005
.005
.813
.813
-.005
-.005
1.625
1.688
1.750
.813
-.005
.813
,813
.813
,813
-.005
-.005
-.005
-.005
.813
.813
,813
,813
single acting
RTL-15
RTL-16
RTL-17
RTL-18
RTL-19
1.500
2.594
1.563
2,594
2.969
2.969
RTL-21
1.625
1.688
1.750
RTL-22
1.813
RTL-23
1.875
1.938
2.000
2.125
RTL-20
RTL-24
RTL-25
RTL-27
RTL-28
RTL-29
RTL-31
RTL-32
RTL-33
RTL-35
RTL-37
RTL-41
RTL-43
RTL-44
2.469
2.469
3.094
3.094
3.219
3.219
3,344
3,594
Nominal
.625
2.188
2.250
2.375
2,438
2.500
3.594
2.625
2.750
4.344
1.000
4.469
4.719
1.000
1.000
4.969
5.219
1,000
1,000
3.000
3.250
3.500
3.719
3.844
3.844
3.969
.813
b
Shaft &
Housing
d
f
g
Dynamic
Static
Fillet
.250
.250
7420
7380
6980
6980
.030
.030
,250
.250
.250
7300
7250
6980
6980
7760
.030
.030
.030
,187
.187
.187
.187
.187
,250
7760
.250
.250
7720
10100
10100
10700
10600
12300
12300
.030
.030
.030
.030
.030
2,594
2.594
2.969
.187
.187
.250
.250
.250
.312
11200
11200
19700
13360
13360
24200
.040
,040
.040
2.969
3.094
,250
.250
.312
.312
19600
20600
24200
26600
.040
.040
1.813
3.094
.250
1,875
1.938
2.000
2.125
3.219
3.219
3.344
3.594
.250
.250
.250
.219
.312
.312
.312
20600
21500
26600
28500
21400
22700
28200
28500
30900
.040
.040
.040
-.005
.005
.005
-.005
-.005
2.188
2,250
2.375
2.438
.219
.219
37100
44000
.219
.219
,219
.375
.375
.375
.375
.375
28100
31900
33100
33100
2,500
3.594
3.719
3.844
3.844
3.969
35100
46800
46800
52300
-.005
-.005
-.005
-.005
-.005
2.625
4.344
.375
.375
54800
4.469
4.719
4,969
5.219
.312
.312
36600
2.750
3.000
,312
.312
,312
.375
.375
.375
36300
38900
54800
61200
39900
64400
70900
-.005
.875
1.844
.187
-.005
-.005
.938
1.000
1.844
.187
.187
-.005
-.005
1,063
1.125
-.005
1.188
1.250
1.313
1.375
1.438
1.500
1.563
3.250
3.500
1.969
1.969
2.094
.187
,187
2.094
2.344
2.344
2.469
2.469
.250
,250
.312
.375
7750
42300
11300
11300
37100
.040
,060
.060
,060
.060
.060
.060
,060
.080
.080
,080
.080
Thrust plates and roller assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
27
(
c
(
(
o>
oS
C
CM CM CM OJ CJ
CM CM CM CM CM
CM CM CM CM CM CM
CO CO CO CO CO CO
o o o o o o
CO CO CO CO
O O O O O
CO CO CO
CO CO CO CO CO
CD CO ^ CO ^
O O O O O
o o o o o
O O O O O
o
O O O O O
O O O O O
O O O O O
O O O O O
O O O O O
O O O O O
ra
CM CM CO
COCOlO
cor^f^ ojcM
Lo*^
CO
O O O O O
O O O OlO
cococncocvj
O O O O O O
coo o o o o
cvjo
^ ^co
cMCNjcacNj
CO CO CO CO ^
O O ^
^ ^
CD
^
CO
●^ m mincocD
O
O
O
CM
CM
O O O
O O O
OCOCM
CM CO CO
CM CM CM
O O O O O
O O O O O
OCZJO O O
OCOO O O
CO'S-’ao
mioh~f^c35
CO cocoes CO
O O O O O O
o o o o o o
OO COC O'S-05
oaocM^cocD
CO ^
^
lOlOlOlOlO
r*.. r«. r».
CO CO CO CO CO
LO to LOLO LO
r«-r«~r^r^r^
O O O O O
O O O O O
CO CO CO CO CO
to to LOLO to
O O O O O
O O O O O
LO LOlOlO lO
o o o o o o
O O O O O O
lO LO LOCO CO un
CO CO CO CO CO
CO CO OO CO CO
O O O O O
CM CM CM CM CM
CM CM CM CM CM
O O O O O
to to to to to
CM CM CM CM CM
O O O O O O
LO toio lOLOlO
CM CM CM CM CM CM
-M- CO CJ>
CD CD T— CD
5 giz
<« X
ifi
C3
<fi
z
<
o
.a
E
O O O O O
O O O O O
CO
CO CO ●^'S-CO
<
o
O
O
—
CO
a>05^'0-co
CO CO CO CO LO
CO CO CO CO CO
a
O)
to LOLO to to
0>
CM CM CM CM CM
>>
O
2
<0
CD CO 05 05
CO
COCOC005C75
CM CM CM CM CM
CMCMCMCViCvi
O O
●a
,/'^A
0505
.
-
Tj-
COCO^
CDCOCOOOCD
-M-
-^lOCOCOO)
COCOCOCOCO
CO
ocM'3;cpo>
Tj-'^TrTt^'tO
Q.
0)
in
■S
in
CO CO o> to
o
CM CO
CO
CO
5
O ^CM
LoiocD
cor^cocooi
0<DO>^ ^
oJ oJ csi evi CNJ
<D 0> T-CO
<D
iqcDcqocoio
eg CNJ cvi CO CO CO
o
(0
JZ
2 o“
3
Q.
D
-
CQ
-D
w
D
o
e s
(A
CO CO coco CO
O O O O O
CSOCDO O
05
O)
I
I
I
I
o o oco o
I
I
I
I
I
CD CD CO CO CD
O O O O O
o o o o«o
I
I
I
I
I
CD CD CO CO CO
O O O O O
O O O O O
I
I
1
I
CM CM CM CM CM
E
I
CM CM CM CM CM
OO CO CO CO 00
CO
O O O O O
O O O O O
O O O O O
O O O O O
O O O O O
O O O O O
o oimno
LOLor^p^o
CM CM CO CO to
OLO OtO O
CMCMLOLOr^
CM CM CO
LOLom o o
f^h~h-0 0
CO CO ooo o
CMCMCMCMCM
CMCMCMCOfO
CO CO CO CO CO
CO CO CO CO
tOlO O OlO
u.
ca
o
I
I
I
I
o o o o o o
O O O O O O
o o o o o o
OCMlOh-O
Locor^eoo
LOCO CO CO CO CO
CM ’S- CO
<x>
CO
<35 CM
X
m
OCMLOr^O
Cl CO CM COLO
O O
CM
CMinr^ocM
r^cooco
COCO'M’LOIO
LOP-ocMio
CMcoiO’—
COCOI—COCO
r^oiootn
oiooooo
05 O »—CM CO
LOtOP^OCMLO
co<3cmldp~
CMCMCvicM
O CC
Z
m
E “
<
m Z
.
CMCOO-LO
O O O O O
CO r~-CO 050
o o o o —
cp cp cp Cp CO
CO CD CO CO CD
ccxxxx
xxxxx
o
CC
>>
ra
X
3
E "
V
~
*0)
X
(0
E
E
0)
CM CO'S-in
CO
ocmiooioo
CMCviCMCOCOCO
CO CO CO io CO
CO 050
CM
CO CO CO CO CO
CM CM CM CM CM CM
CO CD CO CD CO CO
.
CMCOO-LOCO
xxxxx
ccccaicccc
cccccncncc.ee
w
45
4>
o
o
(O
S
2 c
(0
n
p
in
05
o
c
■o
2
CO
o
in
05
in
05
C ®
w
in
3
05
u
(0
a
01
X
in
li
X
in
0)
45
w
^ o
45 o
ID
E
Q X
O)
c
o
o
<o
c
o
u
z
(0
a
o
c
0)
0)
<
1
CO
-Q .im
in TJ
o
T3
I
o
(0
if>
o o o o o o
c
05 U 0)
«.2
CD
0)
coeoeoooo o
o o o o.
.
X
c
(A
I
CD CO CO CD CD
O O O O O
(0
O)
CC
o
0) =
0)Q O
E C UJ LU
"O
u>
0)
00
CM
)
)
)
)
CO X
m m
O ef
5
H
O
z
(A a 3 33
3
(O
a>
<9
0)
CO
o
o
■Nj
O
O
(O
31 o -I
S'
-rJ
O
o
(/)
<e
3
or
(9 C
3 «
(/>
O
(/)
Q
CO
3) O
0)
(9
U
(9
■o
u
o
<9
« 3
s “●
s
o
o
(9
(A
(9
33 lu
0)
VI
ajiqjD
0303033303
33333J3J33
cr>
O)
4i.oaro
05CTJ cricTicn
- ococo*^
Cn tricn tn Cn
cnt/i-P^copo
-vj -nJ
cncn^ ji-ji.
OtOOD-^
4^ 4^.
05 Ol
0)05 4k
4k4krororo
O O OCOCD
CO-kJ-ki-O-^
o o o
o o c>o<z>
o o o o o
o o o o o
o o o o o
o o o o o
o o o
o o o o o
o o o o o
o o o o o
o o o o o
r\5roro
rotorofo
4kfs>^
rs504k003
ocD05054k
ro4kro-kO
o o o
o o o
o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
4k 4k 05
C0 05 4k4k0
Ca5M 05 050
Cjicn^
^^05 cn^
^^ooo
o ocn
o o o
cncno ocn
o o o o o
cncno o o
o o o o o
~«j -»j
o o o
3J3D3J33:i)
33 33 33 33 3J
3333333333
3333333333
<= £n
~4->J-kj-O-kj
cocorororo
CD 2
● OtOCO-^l
CO CO CO CO 05
05 cn 4k Coro
05 05 05 05 01
cnotcncn4k
4k 4k 4kcoco
cocorororo
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
ro—‘ocoro
OCOCDO
CO CO'k| CO 05
05 OO *kj 0>
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
O O O O O
o o o o o
o o o o o
o o o o o
o o o o o
coo)Eororo
ro t\5 f\5 t\5 to
Mro
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
O O ^ 'k-4 W4
o o o o o
o o o o o
●kj ~g kj Ca5 CO
cncncn-kjkj
o o ocncn
C*5 C«5 05 CO CO
~4 kj-Vj kj kj
C45 C55 C41 C51 cn
-~J-'J->J
4k. 4k
coro
'nI-nI—J
—J
4^ 4^ CO CO 05
o o o o o
o o o o o
●
040 05-^
33 C3
03
I
ua^
o
I a. w
■kj
o
o
O)
3i
(9
to
o
O’
=
(9
<9
5-«
<9
v>
« 0)3
c
035"
<
(9 o' O'
Q) o *9
3
I
I
1
o o o
rororo
o o o
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
o
o ocncncn
I
I
I
1
I
I
I
I
I
1
o o o o o
o o o o o
rororororo
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
o o o o o
O O OCD05
●
●
● 0 0
I
I
I
a>
o’
I
o o o o o
o o o o o
05 00 05 C35 C55
o
o
c
CA
o
o
3*
u
9)
V)
■Ss.
9
cr
CD
<9
O>0) .b*.
CO CO 05
roro ro
O O O OGD
C> 05 0> 05 cn
cncn 05CJ1
4^4^ ^ CO 05
cocorororo
o o o
o o o o o
o o o o o
o o o o o
CO c«^co<o<o
o <00 0 0
<£)<0 CO <0 <0
0> 05 05 05 05
o o o o o
O) O) 05 0> 05
o o o o o
05 05 05 0> 05
o o o o o
05 0505 05 05
OCD03
pCOpO^CD
03 ^ 05 03 ^
o>cn ^05cji
CO CD CO CO CO
O O O CD O
CD CD CD CO CO
^ ^ .u .u
<0 CD^ CO CO
ror\5 ro
CO
CO
ro
</)
CD coo ^
CO **sj C/1 cn CO
CO—^ oco
<p
■D
000300
03 CO 00
COCDO O O
C0 03
*
'
O O OCDO
C0OCOO O
3
Q.
o*
€
ro
a
a
>
3
O o
T3
<Q
O
<0
» 3
Q.
u
4:^4^ 4^ 4^ 4:^
4
a>
©
la
<p
^^roo
o oforoo
C41CTICO
0 0
coco C71CJ5CO
0 0
roro
0 003 00 00
coco
●
0300 cn cncji
●
‘ 0> O) 05
cncjicricn cn
05 cn cjn cn C75
rororo
rororo roro
05 05 05 05 05
rororo ro ro
05 050 0 0
roroo o o
03 03 ^ -*<4
-Nkj c/1 cn cn
Cn c/10 0 0
CO CO CO CO CO
o o o oicn
C4icnc45Cn tn
-^*^'^05 05
c/1 c/1 c/1 ro ro
O O OC/lC/1
05 05 05 05 05
rororororo
C/l C/l C/l C/l Cl
C/l
o
o o o o o
o o o o o
40 05f\5kJ4k.
4kcnrocotn
o o o o o
o o o o o
o o o o o
kJ4J>4kC0
o o o o
o o o o
o o o o
C4l4kC0r0O5
oocoroco
oro-kjjk.4k.
ooooo
ooooo
CO tO —>■ 05 IV5
cnooCDCocn
ro ro 05
o
ooo oo
oo ooo
o
o
f\3ro
0 0 05
0 000
0 0**vj
05 0> O O O)
05 05 CO CO CO
CO CO 03 00 CO
00 00 CO 03 CO
03 03 O O 03
03 03
^ ^ 0 0
^ ●‘^OlCJlC^l
C^l C41 on C41 Ol
CJl c/1 C45 CJ5 cn
O-klo
05COCJ1
kjkjjk
o o o
o o o
OSkJpotO O
<0 0<OIS5 4k
OD k4 ^ CJ1
CO ^ rs3r\3
ro
0
O
o
o
4k
o
o
o
o o o
!\3
ro
rouic/1
co-^
>^03
o o
o o
o o
cncn cncoco
o o o --sj
3D
05
o
o
o
00540
O O O
o o o
o o o
CO
O
o
o
a>rocx5ki
4k
o
o
o
CO
o
o
o
05
o
o
o
coco ^ roo5
4k
o
o
o
●^03 05 000
0 0C50 0
o o o o o
o o o o o
ro
CO
030C/10
C0 03 ^ 4^
o o o o o
o o o o o
o o o o o
roro
ro
rocDCoo
O
05
2
o o o o
iQ
o
<0 4k
o
05
o
o
o
o
>
o
B>
3
31
o
>
Oi
a
ro
co^ 03^ ro
05 roro 03 4>.
ODOc/1-^ ro
●*^CO CO
03<0 42v coco
ro4>^ 4:^ o
o o o o o
O O O O O
o o o o o
o o o o o
o o o o o
o o o o o
C/l CO c/l
CO--JC75
coco ro
o o o
o o o
o o o
ro
6kJ
CO
o o
o o
o o
05 CO G5 l\5 05
OCOkJC55
oro—kco
o oooo
o oooo
o o o o o
o o o o o
o o o o o
ro
co4k4k~ocn
COODkJJi.
o oo oo
ooo oo
rororororo
cncncntncn
o o o o o
rororororo
tn cn OI tn 441
o o o o o
ro ro
cncn rororo
o ocnui4n
ro ro rororo
c/l cn c/l c/l c/l
o o o
ropoo ocn
cncn rororo
o o o o o
05 O 05 05 05
rororororo
O’
o
CO
o o o o o
O O O O O
05 0505 05 05
ro roro ro r\3
0)
a>
I tn
rororo
tntntn
o o o
H
T1 o
=:
<D
c
3-
fi)
S2. =»
03
<D
&>
^ fio
(O
3
(Q
ro
CD
U>
>
CO
o
<A
33 D H
?|c
O
3
33
3333 X 3333
33:D3D3)3D
3333333333
3333333333
3333333333
0>
ro
0)0>0>0>0
rofv^rororo
0>00>0)0)
ro
OtOOO-^CT)
0>0>0)0>0>
Q>
0> O? 0>
* o o o o
0>
CD.C>.CO)\}
ocooo^o^
(n
O » _
O Q-O
w = fi)
« » «
a>
coro
z s
3 **
m
o o o o o
CJlJ:.COrO
●
u>
« o
V)
O
fi)
3
CO
cocorororo
rororoivs
(ji
hoo^b)Cji
wKo^o<d
ODOo-vioiCT)
cncn^coco
o
O
cnocnroo
o o ocno
-^cnrooco
cnocDO*^
~Ni-*cno3ro
tDroo-^oi
0)003-^
roo-sjoiro
^ ^cococo
0 00)0 o
o o o oro
o o o o o
roo o'-4'^
o o o o o
o o o
ro ro o o o
o o o o o
O O O O O
0>Q>CD0)0)
rororoporo
o o
ro
tncoroo o
0-^01 POO
(fi
o
«
(A
Q>
o
<fi
fi)
ill
I
(fi
o>
=●
(fi
o 5‘
lu
K><ob>^ro
OGO ^ 0>
o
o>oicooi
ro o ^cnro
00
o
000)010 0
o o o o o
tnocjiocji
o o o o o
CO
C<}O3C<)O3C0
COC0O3O>C>>
Cd CO Ca3 CO 03
mto (O
^
o
ro
popoporopo
pororororo
popopopopo
I
I
I
I
t
o
oo o o o
CD
CDO O O O
o 3g.
3fi)
U)
(fi
«(0 Q.
p
o
Z
rorororofo
o ooroK)
O ●‘vj ●**40 0
O
O O O O O
o
o>
3Q
O
o
(0
H
O O O O O
O O O O O
pororororo
I
I
I
I
O O O O O
●
●
'O O
0 0 00303
I
I
I
I
o o o o o
o o o o o
03 03 00 03 03
I
I
I
I
I
o o o o o
o o o o o
00 oo 00 03 CD
I
I
I
I
3
»
I
o o o o o
o o o o o
0DCOOOO3 oo
(fi o ^
D)
3
3
(fi
w
I
■o
3
iQ
(/)
3 Q (D
o
i®
™ (fi
o S’
«
</)
fi)
3
(D
D)
<B |■><
o
fi)
a
7!
3
CJ1
0-3
V>^
a
(/)
CD
3
●2.0 3
fi)
3“
(D
c
3J o
—
a T*©
fi)
CD ^ ^
(/>
2.5-0
(0
(fi
■o
0)
fi)
(fi
o
w
3
O o
(D
0)
CO
cocoropopo
popopopopo
^
030030301
.'(^03^00
l£)CDC0'v)O3
(£3
03—‘<003
.u—‘CD030
●■CDCO
CD
4)^ 4::^
£3.
003^K30
C«3O3O3O3C0
<00303^4^
03 CD 03 03 O
4^0 03
03
03—^0003
4»-—‘C00343-
PO
CD
O
POPOPOPOPO
CD CD CD CD CD
O O O O O
CD
o
o
03CDCn4^03
COPO
o
CD CO 03 0)
PO 03 O .C»
PO PO ^ PO PO
POPOPOPOPO
COCD0D0OO3
43.43.
03
<DCD
popotoforo
CD CD CD CD CD
O O O O O
POPOPOPOPO
POPOPOPOPO
POPOPOPOPO
CD CD CD CD CD
O O O O O
O O O O O
CD CD CD CD CD
O O O O O
o o o o o
43
o
cocococopo
bscDCo^bo
03
PO
O—‘PO-O
tOOPOCDCD
'
O O
CO CD 0)03
cr
■
(Q
Q.
0)
(0
><
CD CD CD CD CD
03
CD CD CD 03 00
CD CD CD CD CD
o o o o o
C«3 CO CO coco
-vj
CD CD CD CD CD
O) CO CO CO Co
-O-O-O-O-nJ
CD CD CD CD CD
CO
o o o o o
r\3 [33 r\3 r\3 ro
b3b3cnl^K3
Porv3roj\3Po
Ksoooo
ODCOOSQOCD
CD43 43COCO
'nJOOOCOCD
CD-slOOSO
CD03030 0
OPOfOO O
3
CDCDPOPOCD
0'0-'4I'3PO
O O O O O
00
PO
CD
434343C043
COCOCOCOCO
COCOCOCOCO
CO CO PO PO
o
^cdKs^o
cdcdcdKspo
KsKsKooo
oo^^od
43
43 43 43 43 CO
C0 43P0OCD
43043.03 03
CO CO CO CO CO
CO CO CO CO CO
CD CO CO CO CO
POPOPOPO
CO COPO PO O
03 .^43 CO CO
o o o o o
o o o o o
pocoo o
●
O O O O O
o o o o o
O
CDOCDCDO
O O OCDCD
CD CD CD O O
O O CD CD (»
ococo
O
3
cr
CD
Q.
co^^cdcd
03 CD CD O O
O
CT3
CO
o
o
O O O O O
O O O O O
CO
o
—
CD CD
43 43 03
O O O O O
O O O O O
(73
■
o
o
43 43 CO CO
.&43CDCD
o o o o
o o o o
o
3
>
o
o
3
n>
>
<7)
03
CO
o
o
o
o>
ro
CD CD CD CD 43
CO CO CD
CD
43 43-^ COPO
O O O OCD
o o o o o
o o o o o
43 43 4^ 4k. 4^
03 43
PO CD
CDO
o o
430
CD 03
O O
o o
0
03
O
o
o o o> o o
o o o o o
0> O 0> 01 Q>
roro roiNoro
ro rs) ro ro r\)
03
POPOPOPO
●>4
43 43 CD
POPO-^-^OS
o o o o o
o o o o o
o o o o o
o o o o o
ooporo''4'Nj
o o o o o
o o o o o
o o o o o
o o o o o
Cl) CO CO 0)0
o o o o o
CO CO 0)0)0)
43 CO CO 03 CO
o o o>o> 01
ro ro ro roro
CD CO CO
vt
o
fi)
□P
o
v>
3? S’
(B
5S. 3f
CO
)
)
)
)
)
Andrewsa Roller Thrust Bearings
RTW series
d
B
RTW 700
i
inch dimension
f
S3
I
1
H
single acting
self-aligning
T
r
HEAVY SECTION
b
m
D
H
BEARING
NUMBER
B
Nominal
●(●.000
b
1.812
1.812
1.812
1.812
1.812
-.080
-.080
-.080
-.010
2.06
2.06
5.94
6.94
2.06
7.94
.375
.375
.375
3.06
3.06
5.94
.375
-.010
6.94
.375
1.812
1.812
-.010
-.010
-.015
-.015
-.015
3.06
3.06
4.09
4.09
4.09
7.94
8.94
6.94
7.94
8.94
.375
.375
4.09
5.13
.500
.500
.562
.562
.562
.562
2.000
6.312
RTW-728
RTW-729
RTW-730
RTW-731
2.000
7.312
2.000
3.000
8.312
6.312
3.000
7.312
RTW-732
3.000
3.000
8.312
d
RTW-734
RTW-735
RTW-736
4.000
9.312
7.375
4.000
4.000
8.375
9.375
2.312
2.312
RTW-737
RTW-738
4.000
10.500
8.500
RTW-739
RTW-740
5.000
5.000
9.500
10.500
RTW-741
5.000
11.500
2.312
2.312
2.312
2.625
2.625
-.015
5.000
-.015
-.015
5.13
5.13
9.94
7.94
8.94
9.94
10.94
RTW-742
5.000
12.500
2.625
-.015
RTW-743
RTW-744
9.500
10.500
2.625
-.015
5.13
6.13
11.94
8.94
2.625
2.625
2.625
-.015
-.015
6.13
9.94
RTW-745
RTW-746
6.000
6.000
6.000
6.000
6.13
6.13
10.94
11.94
RTW-747
7.000
RTW-748
7.000
7.000
10.500
11.500
2.625
2.625
2.625
-.020
-.020
-.020
14.750
12.750
4.000
-.020
4.000
14.750
16.875
RTW-749
11.500
12.500
12.500
RTW-750
RTW-751
7.000
RTW-752
RTW-753
8.000
RTW-754
RTW-755
RTW-756
10.000
10.000
10.000
20.875
RTW-757
RTW-758
RTW-759
12.000
12.000
12.000
14.000
18.875
20.875
24.875
20.875
14.000
22.875
RTW-760
RTW-761
RTW-762
RTW-763
RTW-764
8.000
8.000
14.000
16.000
16.000
16.875
18.875
24.875
22.875
25.000
2.312
-.015
-.015
-.015
5.13
7.13
9.91
7.13
10.91
-.020
7.13
7.19
8.19
11.91
13.91
11.91
4.000
-.020
8.19
4.000
4.000
5.000
5.000
-.020
-.020
-.020
-.020
8.25
13.91
15.91
10.25
10.25
10.25
15.91
5.000
6.000
6.000
4.875
4.875
-.025
-.025
-.025
-.025
-.025
12.25
12.25
12.25
14.25
14.25
17.91
19.91
23.91
19.88
21.88
4.875
6.000
6.000
-.025
-.025
-.025
Shaft &
Housing
D
RTW-727
RTW-733
LOAD RATING (lbs)
Tolerance
14.25
16.25
16.25
17.91
19.91
23.88
21.88
23.88
f
g
m
r
Dynamic
Static
Fillet
154000
177000
.062
.625
.625
.625
3.375
4.250
5.000
4.000
4.375
.625
.625
.750
.750
5.250
6.250
5.000
5.250
12.00
14.00
6.38
145000
173000
122000
8.50
165000
.750
5.875
10.00
194000
.750
6.500
6.000
6.125
6.250
7.000
14.00
205000
7.38
136000
384000
224000
10.50
12.75
16.00
184000
226000
264000
337000
402000
500000
7.250
7.250
7.375
19.75
6.75
9.50
304000
611000
253000
7.375
13.50
157000
208000
189000
.562
.875
.875
.875
.875
.875
7.500
17.00
214000
.562
.562
.562
.812
.812
.875
.875
.875
1.375
1.375
8.125
8.250
8.13
11.50
8.250
15.38
9.000
9.375
15.38
8.50
160000
228000
276000
483000
334000
.812
.812
.812
1.031
1.031
1.375
1.375
1.375
1.687
1.687
10.375
12.00
10.500
11.500
12.000
13.250
19.50
16.75
20.00
24.00
1.031
1.687
1.250
1.250
1.031
1.031
2.000
2.000
1.687
1.687
13.625
13.875
16.000
15.500
15.500
16.375
17.500
.500
.500
.500
.500
.562
.562
1.031
1.250
1.250
.625
.625
.750
.750
.875
.875
1.687
2.000
2.000
18.000
7.50
103000
9.50
12.00
6.00
9.50
113000
144000
95000
117000
248000
143000
191000
259000
.062
334000
186000
.062
282000
352000
371000
332000
396000
271000
433000
562000
873000
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.250
539000
.250
444000
797000
573000
488000
1130000
944000
724000
1394000
864000
1782000
.250
.250
.250
.250
.250
15.38
20.00
28.50
19.50
28.50
649000
929000
1296000
700000
890000
1242000
1787000
2825000
36.12
17.50
23.50
1054000
797000
1067000
2516000
1548000
1420000
1968000
2284000
.250
.250
.250
.250
.250
.250
.250
.250
Thrust plates and roller assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
RTW-700 Series Replaces RTWH-700 Series Bearings.
31
V
Andrews® Roller Thrust Bearings
RCT & RWCT series
inch
D
0
B
B
K\\^
F
cl
RCT plain
CRANE HOOK
TYPE
inch dimension
single acting
EXTERNAL DIMENSIONS
BEARING
NUMBER
(RCT or RWCT)
11
16
17
19
20-C
RWCT with grease fitting
INTERNAL DIMENSIONS
0
B
1.640
RCT
RWCT
3.343
H
,812
.812
1.000
d
2.953
3,218
h
BEARING
CAPACITY*
1%
(lbs)
3.093
3.468
3.937
4.000
4.250
3.593
4.000
4.250
4.375
1.000
1.000
4.250
4.750
4.375
4.843
1.000
1.000
3.975
4.453
.875
.875
3.265
4.875
4.750
6,125
5.156
4.843
6.250
1.250
1.000
1.500
4.762
4,453
5,850
1.125
.875
1.375
27-C
27-B
28-A
3.265
6.187
6.375
1.750
3,515
6,156
6.375
3.515
6,750
6.937
30-B
34-A
3.577
3,765
6.375
7.125
6.375
7.250
1.625
1.625
1.375
1.875
5.968
5.968
6.540
5.968
6.855
1.625
1,500
1.500
1.250
1,750
31/4
3’^
3’^
35-A
38-A
39-A
4.265
8.171
8,125
8,375
8,312
2.000
2.000
1.875
1.875
5.515
5,577
2.250
2.500
10.104
2.125
2.375
4’A
4’^
44-A
9.375
10.500
11.500
2.000
10.968
5'^
250000
301000
394000
494000
45-B
9.156
10.500
11.500
7.968
7.912
8,968
1.875
5^16
635000
45-A
49-A
52
54
6.015
6.827
8.452
9,327
11.156
11.375
3.000
10.968
12.750
12.750
14.500
16.500
2.500
3.000
12.340
2.750
2,375
2.750
6
6'^^s
621000
767000
979000
1165000
20-B
23
24-A
23-B
27-A
1.952
2.015
2.265
2.265
2,327
2.765
2,765
2.827
4.515
5.015
14.500
16.500
3.000
3.600
3.860
3.975
13.910
15.910
.687
.687
.875
.875
Hook
Shank
Diameter
.875
2.750
1'5/16
2
28000
37000
50000
2'^
2'/4
55000
2^16
60000
69000
87000
69000
158000
2%
2%
2*yi6
31/4
3^16
5
8^16
9^16
60000
158000
158000
175000
148000
230000
Dimension F on RWCT Series is the protrusion of the grease fitting and is approximately 13/32" in all sizes.
Thrust plates and roller assemblies may be purchased separately.
Dimensions, tolerances and material subject to change.
'Bearing capacity based on permanent deformation of .0002" of the roller diameter.
32
Andrews® Roller Thrust Bearings
inch
Tapered Roller Thrust Bearings
For years, Andrews has made one of the most complete
Thrust Bearing lines in the business: Ball Thrust, Angular
Contact Ball Thrust, Cylindrical Roller Thrust and Hardened
and Ground Thrust Plates. Plus Special Bearings for hun
dreds of industrial applications.
Then in 1977 we started making a few Tapered Roller Bear
ings on request for a number of customers.
Since then, our Tapered Roller Bearing capability has grown
to include Standard and Special configurations from 3" ID to
24
OD, available for both OEM and Replacement
Applications.
Andrews’ track record shows our quality meets established
standards: and our flexibility is unsurpassed in meeting
//
customer needs.
B
Rv
●
r
A
TR
inch
dimension
R
BEARING
NUMBER
30TR01
single acting
40TR01
HEAVY
50TR06t
SECTION
A
3.000
4.000
5.000
5.000
B
6.375
8.500
H
1.313
1.813
2.312
2.312
60TR01
6.000
10.500
10.500
12.500
60TR02t
6.000
6.500
12.500
12.250
2.750
3.500
65TR03t
6.500
6.625
66TR03t
6.625
12.250
12.000
12.000
3.500
66TR01
68TR01
6.875
14.125
3.250
68TR02t
70TR03
7.000
70TR05t
7.000
14.125
14.500
17.000
14.500
3.250
70TR02
6.875
7.000
80TR01
8.000
8,000
8.000
9.000
9.000
16.500
16.500
16.500
19.000
19.000
3.625
9.250
9.250
9.250
10.000
10.000
11.000
19.000
21.500
19.000
21.250
21.250
23.750
4.125
50TR01
65TR02
80TR02t
80TR05
90TR01
90TR05t
92TR01
92TR02
92TR04t
100TR02
100TR03T
110TR01
2.750
2.750
2.750
3.250
4.000
3.250
3.625
4.750
4.125
4.125
5.000
4.125
4.625
4.625
5.375
LOAD RATING (lbs)
{CHAMFER
X 45*;
Dynamic’
.13
.13
.19
.19
.25
117,300
219,600
343,000
407,200
502,200
375,500
716,000
1,138,000
1.454,000
1,693,000
.25
.25
.25
.25
.25
574,000
380,300
517,200
392,500
479,400
2,050,000
1,218,000
1,847,000
1,323,000
1,712,000
.25
.25
.31
ID .25/OD.13
609,800
723,900
656,200
967,000
.31
794,000
2,023.000
2,585,000
2,101,000
3,208,000
2,719,000
.38
.38
.40
.50
.50
813,700
986,000
813,700
1,103,000
1,299,000
2,743,000
3,610,000
2,743,000
3,719,000
4,698,000
.50
.63
.50
1,103,000
1,529,000
1,299,000
1,469.000
1,743,000
1,914,000
3,719.000
5,071,000
4,698,000
4,874,000
6,141,000
6,349,000
.44
.44
,44
Static
"Dynamic load rating rated at 33 1/3 RPM and 500 hours.
fDenotes full complement of Rollers, no Roller Separator.
33
Andrews^ Components
Pressed Steel Retainers
B-A-
inch dimensions
PRESSED STEEL RETAINERS
P
RET
NO.
A
B
BALLS
P
B
±.010
±.010
REF
No.
Size
10J03
1.039
1.712
1.378
13
%2
10J04
1.050
1.375
12
14
11J01
1.137
1.720
1.875
1.510
12
S/i6
11J03
1.189
1.814
12
V*
11J04t
1.195
1.832
1.500
1.518
13
V4
%2
‘/16
%2
12J01
12J02
13J01
1.267
1.270
1.735
2.075
1.508
1.672
19
13
1.304
2.070
1.687
14
^16
^16
5/16
%2
13J02
1.308
1.933
1.625
14
V4
13J03t
1.342
2.108
1.718
10
5/16
1.380
1.405
1.410
1.430
1.440
1.871
1.624
18
5/16
2.335
2.140
2.200
2.020
1.871
1.779
1.812
1.732
12
14
%
1.850
1.952
1.920
1.850
1.820
17
V4
14
yi6
1.565
1.570
1.584
2.165
2.335
2.275
2.125
2.060
16J06
1.604
1.604
1.620
1.635
1.675
2.345
1.941
2.326
2.415
2.458
16J07
16J08
16J09
17J02
17J03
1.675
1.613
1.646
1.728
1.762
±.010
±.010
.190
.190
02J03t
.257
02J04
02J05
.275
.278
.280
.318
.373
.360
.411
5
01J02
.369
.444
.493
.445
.550
02J06t
03J01t
03J03t
03J04t
03J05t
.278
.411
5
.320
.322
.340
.340
.550
.520
.629
.623
.623
.419
.472
.479
.479
5
03J06
03J07
03J08
.343
.325
.382
.382
.410
.660
.725
.665
.665
.695
.500
.525
.521
.521
.547
.730
.730
.730
5
.775
.570
.570
.570
.612
11
04J05
.406
.406
.406
.448
10
04J07t
.448
.775
.612
5
04J0B
04J09
.450
.473
05J01
.515
.927
.905
.910
.687
.689
.713
05J02
05J03
.574
1.045
.812
8
10
10
10
.582
1.053
.812
8
06J01
06J02
06J03
06J04
.610
1.006
.627
1.006
12
6
9
5/^2
5/32
03J09t
04J01t
04J02
04J03t
04J04t
06J05
06J06
06J07
06J08
06J09
06J10
06J11
No.
Size
>/l6
5
5
9
%4
Vl6
8
5
10
5
9
Vi
13J04
6
10
Vi
14J01
5
5
14J02
%2
%2
14J03
14J04
Vb
%
15J01
15J02
15J03
Vb
15J04t
1%
15J05t
yi6
16J02
16J03
3
%2
%2
^16
?16
.652
1.348
.807
.807
1.000
.650
.660
1.151
.900
12
yi6
1.275
.973
11
V4
.667
1.280
.973
.675
.605
.690
.687
1.225
1.096
1.021
1.092
.950
8
8
%2
.886
12
%2
.654
.765
.787
.745
%2
16J05t
1.555
%2
^16
1.972
1.782
1.973
2.030
2.062
14
Vl6
16
%
18
14
12
5/16
2.458
2.062
16
^16
2.509
2.062
14
%
2.789
2.358
2.383
2.221
12
1^
2.047
2.080
16
'/4
1.759
2.600
1.812
1.840
1.840
2.517
2.200
2.165
24
20
2.218
17
2.323
16
18
2.303
2.375
2.360
2.156
2.525
12
Vl6
17
%
16
16
16
Va
2.365
2.453
22
12
.889
12
18J05t
1.841
.9063
12
19J01t
1.915
2.692
1.925
1.927
2.825
1.997
2.325
2.165
.812
.968
9
Vb
2.005
3.045
08J02
.812
1.355
1.083
12
%2
20J02
2.008
2.718
08J03
08J04
.816
1.289
1.053
12
yi6
20J03
1.450
1.135
10
Vi
20J04
2.035
2.066
2.881
.816
08J05
.820
.812
1.234
1.027
5^2
21J01t
2.186
1.355
1.083
15
14
2.855
2.965
%z
21J02t
2.195
2.967
2.578
2.578
08JS10
09J01
.848
1.402
1.125
12
1.412
1.167
14
?16
¥i6
21J04t
.912
22J01
09J02
.955
1.550
1.250
V4
10J01
1.012
1.319
Vt
22J02
22J03
10J02t
1.040
1.616
1.585
12
14
2.195
2.200
2.219
1.313
14
^16
23J01t
2.967
3.033
3.005
3.420
3.240
2.578
2.616
2.618
2.825
2.780
1.095
9
1.000
12
V*
?16
tCONSULT FACTORY FOR AVAILABILITY
*Two piece retainer
Dimensions, tolerances and material subject to change.
V64
14
.856
11
Vl6
%2
2.597
2.807
2.477
1.016
19
1
14
17J04*
18J01
18J03
18J04
^6
^16
5/16
15
20
19J02
19J03
19J04
20J01
08J08
34
16J04
1.521
1.150
1.267
1.400
1.245
1.130
07J01
07J02
07J03
08J01
BALLS
A
NO.
OUOIt
REF
P
RET.
2.250
2.310
2.750
2.468
%2
Vl6
18
19
16
21
K.
%2
yi6
>%2
V4
5/16
Vl6
“A2
^16
12
^16
5/16
10
5A6
20
”A2
^16
20
16
12
Vi
%
CONTINUED ON PAGE 35
Andrews® Components
BA
inch dimensions
PRESSED STEEL RETAINERS
P
CONTINUED FROM PAGE 16
RET.
A
B
P
BALLS
B
±.010
±.010
REF
No.
3.775
3.781
4.928
4.593
4.346
23
Vi
4.187
26
3.875
3.892
5.475
4.970
27
5^6
'>/l6
Vl6
%2
38J03
3.898
4.688
4.685
4.433
4.280
19
%
37J01
37J02
38J01
38J02
22
y*
Vl6
yi6
7i6
40J01
4.035
5.214
40J02*
3.955
5.900
4.625
4.909
41J01
41J02
41J03*
4.155
5.095
4.627
4.187
4.128
6.020
6.094
5.125
5.117
42J02
44J01
44J02
44J03
45J0V
4.237
4.425
4.430
5.405
5.325
5.610
4.821
4.875
5.020
4.460
4.553
5.585
6.465
48J01
49J01
49J02*
51J01*
56J01
4.770
4.900
4.945
5.137
5.625
S6J02*
58J01
60J01
62J01
67J01
80J01*
5.645
5.845
6.050
6.205
6.712
8.005
±.010
±.010
REF
No.
Size
2.415
16
18
22
12
^16
23J05t
3.120
3.250
3.200
3.360
2.718
2.792
23J04
2.314
2.335
2.380
24J01
2.422
3.135
22
24J02
24J05
25J01
25J02
26J01
2.460
3.515
18
2.401
2.531
2.595
2.620
3.062
3.595
3.455
3.515
2.992
2.731
3.065
3.015
3.067
18
26J02t
2.658
2.668
2.575
2.775
2.830
3.608
3.385
3.915
3.715
4.000
2.943
2.970
26J03
27J01
27J02
28J01
2.790
2.890
2.783
18
“A2
18
20
%
3.125
3.033
3.250
3.248
3.417
18
24
Vl6
^hz
%
16
'h
22
%
19
%
3.480
3.445
3.996
18
23
%
14
‘?16
30J01
31J01
31J02
3.005
4.015
3.923
4.976
3.100
4.297
3.687
20
Vz
3.185
4.510
3.847
18
^6
32J01
32J02
32J03
33J01
34J01
34J02
3.225
3.225
3.282
4.069
4.262
4.475
3.642
3.750
28
■‘,^2
Vl6
3.880
20
3.355
4.685
4.031
19
3.425
4.205
3.815
3.442
4.845
4.143
24
18
29J01
29J02
22
BALLS
A
NO.
23J02
23J03
P
RET.
NO.
Vl6
^16
Vl6
%
Size
24
16
28
17
17
%
26
ft
Vz
5.024
32
28
28
5.518
18
5.687
6.145
6.875
7.066
7.725
5.252
5.517
5.900
6.102
6.697
36
28
%
20
20
■y.6
7.061
7.030
7.342
7.405
7.905
9.885
6.353
6.451
6.700
28
32
32
30
32
32
6.805
7.308
9.000
%
‘^16
Vl6
>^16
‘%2
20
^6
3/16
Vz
Vz
Vz
tCONSULT FACTORY FOR AVAILABILITY
*lWo piece retainer.
Dimensions, tolerances and material subject to change.
35
y
Andrews® Components
Thrust Washers
Andrews Bearing Corporation offers full capability for man
ufacturing hardened and ground flat race thrust washers,
Thrust washers provide a friction bearing surface upon
Andrews Thrust Washers can be made in various configur
ations to meet customer needs. Lubrication grooves, keyed
or notched I D's, lapped finishes and special geometry
for radius/angle represent some of these configurations.
which low thrust loads can rotate at low RPM in industrial
Materials include; Stainless steel, case or thru-hardened
applications where a ball or roller anti-friction bearing is
not essential for performance or where cost or space
prohibits use of a complete bearing assembly.
Typical applications include Gear Sets. Hydraulic Pumps.
.250'’ I D to 30” 0 D.
steel and bronze.
Power Transmission Units and Turnbuckles.
B
A
A
B
H
A
B
H
A
B
H
+.000
+.005
WASHER
+.003
-.003
-.005
No.
+.005
+.000
-.003
+.005
-.005
WASHER
No.
+.003
+.005
+.000
No.
+.003
+.005
+.005
-.005
WA-1
.500
1.219
.188
WA-16
1.438
2.469
2.375
3.844
.563
1.219
.188
WA-17
1.500
2.594
WA-32
WA-3
WA-4
.625
.688
1.344
.188
.188
1.625
.750
1.469
.188
1.688
2.594
2.969
2.969
2.438
2.500
2.563
WA-5
WA-18
WA-19
WA-20
1.563
1.344
.188
.188
.188
.250
.250
WA-31
WA-2
3.844
3.969
3.969
4.344
WA-6
.813
1.469
.188
WA-21
WA-7
.875
1.844
.188
WA-22
1.750
1.813
3.094
3.094
WA-8
WA-9
.938
1.844
1.969
.188
WA-23
1.875
3.219
WA-24
3.219
WASHER
WA-10
1.000
1.063
1.969
.188
.188
WA-25
1.938
2.000
WA-11
1.125
2.094
.188
WA-26
2.063
WA-12
1.188
2.094
.188
WA-27
2.125
3.344
3.594
WA-13
WA-14
1.250
1.313
1.375
2.344
.188
.188
.188
WA-28
2.188
2.250
2.313
3.719
3.719
WA-15
36
H
2.344
2.469
WA-29
WA-30
3.344
3.594
.250
.250
.250
.250
.250
.250
.219
.219
.219
.219
The chart above gives the dimensions and data for standard
sizes. Call or write Andrews for Assistance with special
requirements.
WA-33
WA-34
WA-35
2.625
WA-36
WA-37
2.688
WA-38
2.813
2.875
WA-39
WA-40
WA-41
WA-42
WA-43
WA-44
2.750
-.003
4.344
4.469
4.469
4.594
2.938
4.594
3.000
3.063
3.250
3.500
4.719
4.719
4.969
5.219
.219
.219
.219
.219
.313
.313
.313
.313
.313
.313
.313
.313
.313
.313
Andrews«c Ball Thrust Bearings
Engineering data
Loads & Life
Ball Thrust Bearings
lated in accordance with standards of the Anti-
To help in the proper selection of bearings, dynamic
load ratings at 500 RPM and basic static load
capacities are included in the individual bearing
specification tables. These load ratings are calcu¬
6
10
20
30
50
100
200
SPCS, ftPM
I
fi
SP6E0 FACTOR, fg
4
3
8
10
UFE, HOURs(Bi o)
UFEFAaOH, f[_
2
20
A
4
30
A
100
f
f
2
1000
500
T
LUr
1
200
300
rUVf
1.5
T
2000
3000
●iinrtiiifiiii
t.S
50
3
300
J.
Y
T
Friction Bearing Manufacturers Association. The
following nomograph may be used to calculate
capacities at other speeds.
.9
10,000
TnT
.8
.7
1000
500
5000
.6
2000
30,000
3000
.3
.4
.5
T
20,000
T
5000
10,000
20,000
30,000
TnT
1
.9
.8
.7
.6
.5
.4
.3
Where:
Formula: fL =
After calculating
T
CaXf.
find bearing life in hours from
nomograph.
Dynamic Load Rating
fi_= Life Factor (from nomograph)
T = Equivalent Load
Ca = Dynamic capacity (from catalog)
fs = Speed factor (from nomograph)
Static Load Rating
Dynamic load is defined as the load acting on a
rotating bearing. Load ratings as given in this cata
log are based on an average life of 2500 hours and
a minimum life of 500 hours for 90% of an apparently
identical group of bearings (B-10 Life). Capacities
under different life requirements can be readily
calculated from the nomograph.
Static load is defined as a load acting on a non
rotating bearing. The basic static load ratings pub
lished in this catalog are in accordance with the
following AFBMA definition. The Basic static load
rating is the central thrust load causing a total per
Material
All Andrews' bearings are manufactured from the
Operating Conditions
materials best suited to the conditions to be met. Ail
thrust load. Itisassumed that lubrication isadequate,
plates and balls are made of vacuum processed
steels. Standard plates are manufactured of SAE52100 high carbon chrome alloy steel or low car
bon steel, case hardened. Other materials used
includestainlesssteel, monel and berylliumcopper.
that locating surfaces are correctly and accurately
Standard retainers are made of mild pressed steel,
machined steel, brass or bronze. Other materials
used are stainless steel, laminated phenolic. Nylon
or Delrin or any other material that is best suited to
manent deformation of ball and race of .0001 of the
ball diameter at the most heavily stressed contact
point.
Dynamic load ratings are based on a steady, central
machined and that no corrosive or abrasive ele
ments are present. If in doubt, consult the factory
foran evaluation of your application. Incorrect instal
lation and excessive temperatures may shorten the
life expectancy of bearings to a point considerably
less than indicated by the dynamic load rating.
the application.
37
Andrews® Ball Thrust Bearings
Engineering data
mOKATOH
o
OMi. INDICATOn
HtQMnirO
RACt
LOCATION WW
BALL
$TAJ/onAAr jucr
GROOVE.
SURPORT PIN
LOAD SECTION
ffli
^
^
SI/fPORT P/N
Figure 1
Parallelism and Flatness
Permissible Speeds
In precision applications, the most important stan
dards are those of parallelism and flatness. Parallel
Since many factors affect the limiting speeds of ball
thrust bearings, it is not possible to accurately calcu
late these speeds. Frequently, speed limits must be
determined by previous experience on bearings
operating under similar conditions.
The factors that affect speed limits are:
The bearing size. The larger the bearing, the lower
the speed limit.
ism is defined as the variation in thickness of the
load section, or the variation in distance from the
bottom of the race groove to the back face of the
individual race. The standard method for checking
parallelism is shown in figure 1. The total amount of
out-of-parallelism is the difference between the
maximum and minimum indicator readingswhen the
plate is rotated one full revolution. Flatness is not as
important as parallelism for bearing performance,
unless a no load or very light load condition exists.
Under normal load conditions, the small amount of
out-of-flatness that could be present would be ab
sorbed by the resilience of the race material.
38
Figure 2
2. The bearing proportions. A bearing of light sec
tion will have a higher speed limit than a bearing of
heavy section.
3. The bearing load. The heavier the load, the higher
the temperature, the lower the speed limit. At high
speeds, however, a minimum amount of load must
be presentto accommodatethe gyroscopicandcen
trifugal forces.
Axial Runout
Listed Speed Limits
Axial runout is measured by the method illustrated
in figure 2. It indicates performance of the assem
bled unit under a specific load condition. Under light
loads, axial runout is the addition of the out-ofparalleiism and out-of-flatnessofthe bearing. Under
heavier loads, the out-of-flatness is less important
and parallelism becomes the determining factor.
Approximate speed limits are shown in the individ
ual bearing specification tables. These limits apply
to moderate loads and suitable oil lubrication. For
heavier loads, and/or grease lubrication, the speed
limit should be reduced. Higher speeds than those
listed can be achieved with special provisions.
Consult the factory for assistance.
Andrews* Ball Thrust Bearings
Engineering data
SHAFT AND HOUSING FITS — BALL THRUST BEARINGS
INCH BALL THRUST BEARINGS*
SHAFT
HOUSING
Nominal
Shaft Dia.
Shaft Dia.
Tolerance
(inch)
(inch)
Over
Inc.
Max.
— all —
Min.
-.0020
Nominal
Housing Dia.
Housing Dia.
(inch)
Tolerance
Over
-.0030
(inch)
Max.
Inc.
— all —
Min.
+ .0040
+ .0020
METRIC BALL THRUST BEARINGS*
SHAFT
HOUSING
Nominal
Shaft Dia.
Shaft Dia.
Tolerance
Shaft Dia.
Tolerance
(mm)
(mm)
(inch)
Over
Inc.
Max.
Min.
+ .0000
-.0009
+ .0000
-.0004
Max.
Min.
10
10
18
18
+ .0000
-.0011
-.0013
30
50
-.0016
+ .0000
50
80
+ .0000
+ .0000
+ .0000
+ .0000
+ .0000
- .0004
30
-.0019
+ .0000
- .0006
- .0007
80
120
+.0000
180
+ .0000
+ .0000
- .0022
120
180
-.0025
+ .0000
250
+.0000
-.0029
+ .0000
315
400
+ .0000
+ .0000
- .0032
+ .0000
- .0036
+ .0000
315
Housing Dia.
Housing Dia.
Housing Dia.
(mm)
Tolerance
Tolerance
Over
6
250
Nominal
(mm)
Inc.
— all —
(inch)
Max.
Min.
Max.
Min.
+ .0051
-.0000
+.0020
- .0000
- .0005
- .0009
-.0010
-.0011
-.0013
-.0014
’Do not use for Bail Thrust Bearing X, Y, 2000, 3000, 4000, or 6000 series. Consult Andrews for proper shaft and housing fits.
RUNOUT TOLERANCES OF METRIC BALL BEARINGS
SHAFT WASHER
HOUSING WASHER
J
RUNOUT
BORE DIAMETER
MM
OVER
Stan(dar(d
Metric
0
30
30
50
50
80
80
120
180
250
315
Bearings
120
180
250
Precision
Metric
0
Bearings
CO-8
INCL.
30
50
80
120
180
250
30
50
80
120
180
250
315
RUNOUT
GROOVE
TO
OUTSIDE
GROOVE
TO
INSIDE
DIAMETER
GROOVE
TO
BACKFACE
DIAMETER
.0012
.0004
.0012
.0012
.0016
.0004
.0004
.0006
.0006
.0008
.0010
.0012
.0016
.0016
.0020
.0020
.0024
.0001
.0001
.0002
.0002
.0002
.0003
.0006
.0006
.0008
.0008
.0010
.0010
.0004
.0012
.0016
.0020
.0020
.0024
.0006
.0006
.0008
.0008
.0010
.0010
.0012
RUNOUT
RUNOUT
GROOVE
TO
BACKFACE
.0004
.0004
.0004
.0006
.0006
.0008
.0010
.0001
.0001
.0002
.0002
.0002
.0003
.0004
39
Andrews- Roller Thrust Bearings
Engineering data
Cylindrical and Tapered Roller Thrust Bearings
Loads & Life
To help in the proper selection of
load ratings at 331/3 RPM and
capacities are included in the
specification tables. These load
SPEED FACTOR fg
1413
12
II
10
09
I
LIFE FACTOR fL
LIFE. HOURS (Bio)
30
20
10
062
0.7
08
300
10
11
400 500 700
12
0 55
1000
=
find bearing life in hours from
Dynamic Load Rating
05
0 45
04
0 35
0 25
0 3
0 2 0 19 0 18
U
m
131415
nomograph.
2000
500
1000
1 7 181.92.0
2.5
300
16
3000
5000
10000
2000
3000
30
20000
3 5
30000
5000
40
10000
45
50000
49
100000
Ca = Dynamic capacity (from catalog)
fs = Speed factor (from nomograph)
fL = Life factor (from nomograph)
T = Applied thrust load
Material
Dynamio load is defined as the load acting on a
rotating bearing. Dynamic load ratings in this cata
log are based on an average life of 2500 hours and
a minimum life of 500 hours for 90% of an apparently
identical group of bearings (B-10 Life). Capacities
under different life requirements can be readily
calculated from the nomograph.
All Andrews’ bearings are manufactured from the
Static Load Rating
Operating Conditions
static load is defined as the load acting on a non
rotating bearing. The basic static load ratings pub
lished in this catalog are in accordance with the
following AFBMA definition. The Basic static load
rating is the central thrust load causing a total per
Dynamic load ratings are based on a steady, central
thrust load. It is assumed that lubrication is adequate,
that locating surfaces are correctly and accurately
manent deformation of roller and race of .0001 of
the roller diameter at the most heavily stressed con
tact point. For Crane Hook type bearings, the perma
nent deformation is .0002 of the roller diameter.
40
06
200
100
70
T
After calculating
other speeds.
tTt
50
fsXQ
Formula:
Bearing Manufacturers Association. The following
nomograph may be used to calculate capacities at
0 7
I
40
09
0 8
200
100
1
TTT
TTT
TT
SPEED, RPM
lated in accordance with standards of the Anti-Friction
bearings, dynamic
basic static load
individual bearing
ratings are calcu-
material best suited to the condition to be met.
Standard plates and rollers are made of vacuum
processed steels: either SAE 52100 high carbon
chrome alloy steel or low carbon steel, case hard
ened. Standard retainers are made of bronze.
machined and that no corrosive or abrasive ele
ments are present. If in doubt, consult the factory
for an evaluation of your application. Incorrect instal
lation and excessive temperatures may shorten the
life expectancy of bearings to a point considerably
less than indicated by the dynamic load rating.
AndrewSd) Roller Thrust Bearings
Engineering data
SHAFT AND HOUSING FITS — CYLINDRICAL ROLLER THRUST BEARINGS
RTL-SERIES
SHAFT
HOUSING
Shaft Dia.
Shaft Dia.
Tolerance
(inch)
(inch)
Nominal
Inc.
Over
Max.
— all —
Min.
+ .0010
Nominal
Housing Dia.
Housing Dia.
(inch)
Tolerance
Over
-.0010
(inch)
Max.
Inc.
— all —
Min.
+ .0040
+ .0020
RT-600 & RT-700 SERIES
HOUSING
SHAFT
Nominal
Shaft Dia.
Shaft Dia.
Tolerance
(inch)
(inch)
Over
Inc.
Max.
Min.
Nominal
Housing Dia.
Housing Dia.
(inch)
Tolerance
Over
Inc.
(inch)
Max.
Min.
1.000
1.125
1.312
1.500
1.125
- .0005
-.0015
2.125
2.375
+ .0015
1.312
- .0006
-.0016
3.250
+ .0017
1.500
- .0007
-.0017
2.375
3.250
+ .0005
+ .0007
3.625
+ .0019
+ .0009
1.687
-.0008
3.625
4.000
1.875
-.0009
4.000
4.531
1.875
2.125
-.0010
- .0020
4.531
10.000
2.125
2.500
-.0011
- .0021
10.000
18.000
2.500
3.000
-.0012
18.000
22.000
3.000
3.500
-.0012
22.000
26.000
3.500
7.000
9.000
-
+.0021
+.0028
+ .0030
+ .0040
+ .0050
+ .0055
+ .0011
1.687
-.0018
-.0019
.0022
.0023
.0025
.0030
7.000
9.000
12.000
-.0015
-.0015
-.0018
12.000
15.000
- .0020
- .0035
15.000
19.000
- .0020
-.0040
+ .0013
+ .0015
+ .0020
+ .0025
+ .0025
-.0033
SHAFT AND HOUSING FITS — TAPERED ROLLER THRUST BEARINGS
TR SERIES (TTHD)
SHAFT
HOUSING
Nominal
Shaft Dia.
Shaft Dia.
Nominal
Housing Dia.
Tolerance
Tolerance
(inch)
(inch)
Housing Dia.
(inch)
Over
Inc.
Max.
Min.
Over
(inch)
Inc.
Max.
Min.
0.0000
7.9999
+ .0000
-.0010
6.3760
10.4370
+ .0025
+ .0010
7.9999
12.0000
+ .0000
-.0015
10.4370
12.5000
+ .0030
12.5000
19.0000
19.0000
23.7500
+ .0040
+ .0010
+ .0020
+ .0045
+ .0020
41
Andrews® Special Bearings
Special Bearings and Assemblies
42
Andrews^ Special Bearings
Wobble Plate Assemblies
Andrews’ wobble plate assemblies are supplied complete with precision
ground ball grooves on both thrust surfaces, ball-and-retainer assembly,
and outboard thrust plates. Variations include straight or splined bores and
special high capacity designs. Tolerance standards can be tailored to com
mercial applications or to more exacting uses such as aircraft hydraulic
pumps. Accurate matching of all components guarantees high performance.
Consult your MPB Sales Engineer or Andrews Bearing Corporation.
43
Andrews® Thrust Bearings
Metric Conversion Table
INCHES
FRACt
INCHES
MM
DECIMALS
.00004
.00039
.00079
.001
.00118
.001
.01
.02
.025
.03
.00157
.04
.00197
.002
.00236
.00276
.003
.00315
.00354
.05
.051
.06
.07
.08
.09
.1
.004
.005
.006
.007
.00787
.008
-1016
-1270
.009
.2286
.25
3/64
.04687
.04724
.05
.05512
.05906
11/64
3/16
13/64
7/32
15/64
-1778
.2
1/4
.2032
17/64
.254
9/32
.3
.3969
19/64
.5
.508
.6
-635
.7
5/16
21/64
11/32
.75
.762
.7938
.9
1
1.016
1.191
1-2
1.27
1.4
1.5
-13780
.14063
.150
-15625
.15748
.17188
.1750
3.5
3.5719
3-810
3.9688
.17717
4.5
4.7625
5
5.08
5.1594
5.5
.18750
.19685
.20
.20313
.21654
.21875
.23438
.23622
.250
.25591
.26563
.275
.27569
.28125
.29528
.29688
.30
.3125
.31496
.32813
.33465
.34375
.350
.35433
23/64
.35938
.37402
3/8
25/64
.375
.8
13/32
.39063
.39370
.400
-40625
.41339
4
4.445
47/64
.73438
3/4
.74803
.750
49/64
.76563
6.985
7
7.1438
7.5
7.5406
25/32
7.62
7.9375
51/64
.800
8.3344
8.5
.80709
.81250
8.89
9
9.1281
9.5
9.525
9.9219
10
10.16
10.3188
10-5
11.5
11.5094
1.778
1.8
15/32
.46875
11.9062
12
1.905
31/64
3/32
.08661
.09
.09055
.09375
.09843
1
.10236
7/64
1/8
.10937
11811
.1250
1/2
33/64
.51563
2.286
2.3
17/32
2.3812
35/64
.53125
-53150
.54688
.550
2.5
2.54
2.6
2-7781
3
3-175
.55116
9/16
37/64
.56250
.57087
.57813
.59055
10.7156
11
11.1125
.82677
53/64
27/32
7/8
57/64
29/32
59/64
15/16
61/64
12.3031
12.5
12.7
31/32
13
63/64
13.0969
13.4938
13-5
13.8906
13.970
1
1 V,
15
-850
.85938
.86614
.875
.88583
.89063
.900
.90551
90625
.92186
.92520
.93750
.94488
.950
.95313
.96457
.96875
-93425
.98438
1.00000
1.06299
1-10240
1.18110
1-250
1.29921
14
14.2875
14.5
14.6844
-82813
.84375
.84646
55/64
11.430
1-3780
1.41732
1
1.500
1-53543
FRACT
15.0812
15-24
15.4781
15.5
1 ^
15-875
16
16-2719
16.5
16.51
16.6688
2
17
2V>
17.0656
17.4625
17.5
2Vi
17.78
17,8594
2%
18
18.2562
18.5
18.6531
19
3
3 If!
19.050
19.4469
19.5
4
19.8438
4 'fi
20
20.2406
5
20.320
20.5
20.6375
6
21-0344
21.4312
21.5
21.590
8
21.6281
22
22.225
10
22.5
1 Fool
24.130
24.2094
24.5
24.6062
25
16
20
25.0031
25.4
27
28
30
31.75
33
35
36
38.1
39
42
1.750
44.45
1.77170
1.88976
1.96850
2.000
2.04724
2.16540
2.20472
2.250
2.36220
2.500
2.51968
2.750
2.83464
2.95280
45
48
50
3.000
76.2
3.14960
3.500
3.54330
3-9370
80
4.000
4.33070
4.500
4.72440
5.000
5.51180
5.90550
6.000
7.08660
7.8740
8.000
8.66140
9.44880
9.84250
10.000
10.23620
11.02360
11.8110
12.000
12.59840
13.38580
13.77950
14.17320
14.96060
24
2 Feet
3 Feet
4 Feet
5 Feet
6 Feet
8 Feel
MM
1-57480
1.65354
6.29920
21
22.6219
22.860
23
23.0188
23.4156
23.5
23.8125
DECIMALS
15.7480
16-000
17.71650
19.6850
20.000
23-6220
24.000
36.000
39.370
48.000
60.000
72.000
78-740
96.000
118.110
196.850
40
50.8
52
55
56
57.15
60
63.5
64
69.85
72
75
88.9
90
100
101.6
110
114.3
120
127
140
150
152.4
160
180
200
203.2
220
240
250
254
260
280
300
304.8
320
340>
350
360
380
400
406.4
450
500
508
600
609.6
914.4
1 Meter
1.219.2
1-524
1.828.8
2 Meters
2.438.4
3 Meters
5 Meters
Ordering
Special items orders: The acceptance of orders for special items
Information
A) Overruns or underruns of 10% shall be acceptable by the buyer,
unless otherwise specified.
B) All tools, dies and fixtures used shall remain property of ANDREWS
BEARING CORPORATION, unless otherwise specified.
Shipments: All prices are F.O.B. Spartanburg, S.C. Specific shipping
instructions should accompany all orders. Otherwise shipments will
be routed “Best Way” at our discretion.
Ordering: In ordering items from this catalog it is necessary to state
quantity wanted, catalog number of the item, delivery date required
and preferred routing.
Quotations: All net prices quoted on special items or volume produc
tion of standard items are for acceptance within 30 days and there
after subject to change without notice.
44
13/16
8.7312
.07
2.032
22
.76772
.78125
.78740
.79688
8
.45313
2
45/64
6.7469
29/64
.08
11/16
23/32
1.7
1.9844
43/64
6.35
6.5
.06693
5/64
21/32
6
.45276
.47244
.48438
.49213
-50
.51181
41/64
-6250
.62992
.64063
.64961
.650
.65625
.66929
.67188
.68750
.700
.70313
.70866
.71875
-72835
1.6
.07087
.075
.07813
.07874
.61024
5/8
.68898
1.5875
7/16
39/64
.59375
.600
.60938
5.715
5.9531
,06250
1.524
19/32
INCHES
MM
DECIMALS
5.5562
.06299
.06
FRACT
4.3656
.42188
.43307
.43750
.450
1/16
27/64
INCHES
MM
DECIMALS
.2250
.4
.025
1/32
5/32
.1524
.00984
-01
.01181
.01563
.01575
.01969
.02
.02362
.02756
.0295
-03
.03125
.0315
03543
.03937
.04
9/64
-0762
.00394
1/64
FRACT
INCH - MILLIMETER EQUIVALENTS
shall be with the provision that;
Terms: Net 30 Days.
Andrews.:
Thrust Bearings Are Our Business
I
MPBXorporation ideas in motion
MPB® CORPORATION, is comprised of three manufac
turing divisions which produce bearings of many types and
frame and accessory uses from SPLIT BALLBEARING
. . . and mechanical jacks and drilling equipment from
sizes. Typical aftermarket bearing applications include, but
ANDREWS BEARING CORPORATION. For further infor
pieces from MINIATURE PRECISION BEARINGS DIVI
directly, or contact your local authorized distributor shown
are not limited to, aircraft instrumentation and dental hand
SION ... precision machine tool spindles and ball screws;
mation about our products and capabilities contact us
below.
commercial instrumentation; and numerous aircraft air9~!sa
MPB® CORPORATION DIVISIONS
ANDREWS BEARING CORPORATION, SPARTANBURG, S.C.
Ball and Roller Thrust Bearings .125" to 30" OD
MPB® CORPORATION
Distributor Sales Office
TOLL-FREE DISTRIBUTOR ONLY TEL: 800/845-7598
GENERAL INFORMATION TEL: 803/583-4541
Spartanburg, S.C. 29302
MINIATURE PRECISION BEARINGS DIVISION, KEENE, N.H.
Miniature and Instrument Bearings .059" to 2" OD plus larger
assemblies and specialty lubricants.
TOLL-FREE DISTRIBUTOR ONLY TEL: 800/258-5422
GENERAL INFORMATION TEL: 603/352-0310
120 Heywood Avenue Suite 106
TOLL-FREE DISTRIBUTOR ONLY TEL: 800/845-6959
GENERAL INFORMATION TEL: 803/582-0892
Represented By:
SPLIT BALLBEARING,-LEBANON, N.H.
Standard and special high precision ball and roller
bearings and integral assemblies to 12" OD and larger.
TOLL-FREE DISTRIBUTOR ONLY TEL: 800/258-7502
GENERAL INFORMATION TEL: 603/448-3000
8>
IDEAS IN MOTION
MPB
CORPORATION
ANDREWS® THRUST BEARINGS ARE OUR BUSINESS
<Y
1985 MPB* Corporation PRINTED IN U.S.A.
CATALOG 4-250D-85