HOUSEHOLD AND I&I
FORMUL ATION GUIDE
TABLE OF CONTENT
L AUNDRY
LAUNDRY DETERGENT “UNIVERSAL”
4
LAUNDRY DETERGENT FOR HAND WASH
5
SOFTENER WITH ODOUR CONTROL
6
HARD SURFACE CLEANER
KITCHEN
HAND DISHWASHING DETERGENT
17
THICKENED CHLORINE BLEACH
7
HOUSEHOLD DISHWASHER RINSE AID
18
ALL PURPOSE HARD SURFACE CLEANER
8
OVEN CLEANER
19
SPRAY & WIPE HARD SURFACE CLEANER
9
DISINFECTION DETERGENT
10
SPECIAL
FLOOR CLEANER
11
SPONGE IMPREGNATION
20
GLASS CLEANER
12
SHOE REFRESHER SPRAY
21
REFRIGERATOR CLEANER “ODOUR ABSORBING”
13
FABRIC REFRESHER “ODOUR NEUTRALIZER”
22
BATHROOM
CAR WASH
ECO FRIENDLY TILE & BATH CLEANER
14
HIGH-PRESSURE CAR CLEANER
23
VISCOUS WC CLEANER
15
MILD CAR WASH SHAMPOO
24
TOILET LIQUID RIM BLOCK
16
TOUCHLESS CAR WASH CONCENTRATE
25
F O R M U L AT I O N G U I D E – L AU N D R Y
L AUNDRY DETERGENT “UNIVERSAL”
Part
Active Ingredient
Trade Name
A
Water
83.90
B
Carboxymethyl Cellulose
0.50
Sodium Lauroyl Sarcosinate, 30 %
PERLASTAN L-30
(Schill+Seilacher GmbH)
Alcohol Alkoxylate
C
3.00
3.50
Coconut Fatty Acid
Zinc Ricinoleate
2.50
POLYFIX ZRC 30 MT
(Schill+Seilacher GmbH)
2.50
GLDA, 47 %
3.00
Defoamer
0.10
D
Sodium Hydroxide, 10 %
E
Enzymes, Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
Heat Part A up to 50 °C
n
Maintain temperature and add Part B while stirring
n
Homogenize
n
Cool down to room temperature while stirring
n
Add Part C in listed order
n
Adjust pH-value with Part D while stirring
n
Add Part E
PROPERT Y
Appearance: turbid, viscous liquid
pH-value: 8.0 – 9.5
4
% w/w
qs to pH
qs
F O R M U L AT I O N G U I D E – L AU N D R Y
L AUNDRY DETERGENT FOR HAND WASH
Part
A
B
Active Ingredient
Trade Name
% w/w
Water
81.50
Acrylates Copolymer, 30 %
5.00
Sodium Lauroyl Sarcosinate, 30 %
PERLASTAN L-30
(Schill+Seilacher GmbH)
3.00
Disodium Cocoyl Glutamate, 50 %
PERLASTAN SCG 50
(Schill+Seilacher GmbH)
2.50
Alcohol Alkoxylate
3.50
Glycerin
2.00
Optical Brightener
0.50
GLDA, 47 %
2.00
C
Sodium Hydroxide, 10 %
qs to pH
D
Fragrances, Colour, etc.
qs
MANUFACTURING PROCEDURE
n
Mix Part A
n
Add Part B and mix until formulation is homogeneous
n
Adjust pH-value with Part C while stirring
n
Add Part D
PROPERT Y
Appearance: white, turbid, viscous liquid
pH-value: 8.0 – 9.5
5
F O R M U L AT I O N G U I D E – L AU N D R Y
SOF TENER WITH ODOUR CONTROL
Part
A
Active Ingredient
% w/w
Water
95.50
Carbomer
0.50
Zinc Ricinoleate
POLYFIX ZRC 30 MT
(Schill+Seilacher GmbH)
2.00
Amino Functional Silicone Polymer, 50 %
STRUKSILON FB
(Schill+Seilacher GmbH)
2.00
B
C
Citric Acid
D
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
Mix Part A in listed order
n
Add Part B and mix until formulation is homogenous
n
Adjust pH-value with Part C while stirring
n
Add Part D
PROPERT Y
Appearance: turbid, viscous liquid
pH-value: 4.0 – 5.0
6
Trade Name
qs to pH
qs
F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R
THICKENED CHLORINE BLEACH
Part
A
B
Active Ingredient
Trade Name
% w/w
Water
58.70
Potassium Hydroxide, 45 %
2.30
GLDA, 47 %
0.50
Myristyldimethylamine Oxide, 25 %
2.50
Sodium Lauroyl Sarcosinate, 30 %
PERLASTAN L-30
(Schill+Seilacher GmbH)
Sodium Hypochlorite, 15 %
C
Citric Acid
D
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
Mix Part A
n
Add Part B in listed order to Part A
n
Mix until formulation is clear
n
Adjust pH-value with Part C
n
Add Part D
1.00
35.00
qs to pH
qs
PROPERT Y
Appearance: colourless, viscous liquid
pH-value: 11.5 – 12.0
7
F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R
ALL PURPOSE HARD SURFACE CLEANER
Part
A
Active Ingredient
C
84.50
Propylene Glycol n-Butyl Ether
5.00
Potassium Hydroxide, 45 %
2.00
n
n
8
PERLASTAN C-30
(Schill+Seilacher GmbH)
3.50
Alcohol Alkoxylate
3.00
GLDA, 47 %
2.00
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
% w/w
Water
Sodium Cocoyl Sarcosinate, 30 %
B
Trade Name
Mix Part A in listed order
Add Part B in listed order to Part A and mix
until formulation is clear
Add Part C
qs
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 11.5
F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R
SPRAY & WIPE HARD SURFACE CLEANER
Part
A
Active Ingredient
C
88.80
Propylene Glycol n-Butyl Ether
3.00
GLDA, 47 %
0.50
n
n
PERLASTAN L-30
(Schill+Seilacher GmbH)
1.50
Isopropyl Alcohol
5.00
Lauryldimethylamine Oxide, 30 %
1.20
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
% w/w
Water
Sodium Lauroyl Sarcosinate, 30 %
B
Trade Name
Mix Part A in listed order
Add Part B in listed order to Part A and mix
until formulation is clear
qs
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 10.0 – 11.5
Add Part C
9
F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R
DISINFECTION DETERGENT
Part
A
Active Ingredient
52.00
GLDA, 47 %
1.00
Isopropyl Alcohol
32.00
Sodium Lauroyl Sarcosinate, 30 %
n
10
PERLASTAN L-30
(Schill+Seilacher GmbH)
2.00
Alcohol Alkoxylate
6.00
Hydroxyethyl Laurdimonium Chloride
5.00
POLYFIX ZRC 50 TB
(Schill+Seilacher GmbH)
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
% w/w
Water
Zinc Ricinoleate
B
Trade Name
Add Part A in listed order and
mix until formulation appears homogeneous
Add Part B
2.00
qs
PROPERT Y
Appearance: clear liquid
pH-value: 10.0
F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R
FLOOR CLEANER
Part
A
Active Ingredient
Trade Name
% w/w
Water
94.50
Propylene Glycol
0.50
GLDA, 47 %
2.00
B
Sodium Cocoyl Sarcosinate, 30 %
C
Citric Acid
D
Fragrances, Colour, etc.
PERLASTAN C-30
(Schill+Seilacher GmbH)
3.00
qs to pH
qs
MANUFACTURING PROCEDURE
n
n
Mix Part A in listed order
Add Part B to Part A and mix until
formulation is clear
n
Adjust pH-value with Part C while stirring
n
Add Part D
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 6.5 – 7.5
11
F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R
GL ASS CLEANER
Part
A
B
Active Ingredient
% w/w
Water
89.95
Isopropyl Alcohol
7.00
Sodium Myristoyl Sarcosinate, 30 %
PERLASTAN M-30
(Schill+Seilacher GmbH)
0.75
Propylene Glycol n-Butyl Ether
2.00
Sodium Citrate
0.30
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
Mix Part A until formulation appears homogeneous
n
Add Part B
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 7.0 – 8.0
12
Trade Name
qs
F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R
REFRIGERATOR CLEANER “ODOUR ABSORBING”
Part
A
B
Active Ingredient
n
% w/w
Aqua
80.00
Ethanol or Isopropyl Alcohol
10.00
Zinc Ricinoleate
POLYFIX ZRC 30 MT
(Schill+Seilacher GmbH)
5.00
Sodium Lauroyl Sarcosinate, 30 %
PERLASTAN L-30
(Schill+Seilacher GmbH)
3.00
Sodium Citrate
0.50
GLDA, 47 %
0.50
Benzalkonium Chloride
1.00
C
Citric Acid
D
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
Trade Name
Mix Part A
Add Part B in listed order and mix until
formulation appears clear
n
Adjust pH-value with Part C
n
Add Part D
qs to pH
qs
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 9.0 – 10.0
13
F O R M U L AT I O N G U I D E – B AT H R O O M
ECO FRIENDLY TILE & BATH CLEANER
Part
Active Ingredient
Trade Name
Water
Sodium Lauroyl Sarcosinate, 30 %
A
14
91.80
PERLASTAN L-30
(Schill+Seilacher GmbH)
2.00
Coco Glucoside, 52 %
1.50
Sodium Citrate
4.50
GLDA, 47 %
0.20
B
Citric Acid
C
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
% w/w
Mix Part A in listed order and mix until
formulation is clear
n
Adjust pH-value with B while stirring
n
Add Part C
qs to pH
qs
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 4.5 – 5.0
F O R M U L AT I O N G U I D E – B AT H R O O M
VISCOUS WC CLEANER
Part
A
B
C
Active Ingredient
n
n
% w/w
Water
31.00
Sodium Hydroxide, 50 %
3.00
Myristyldimethylamine Oxide, 25 %
3.50
Sodium Lauroyl Sarcosinate, 30 %
PERLASTAN L-30
(Schill+Seilacher GmbH)
1.50
Sodium Hypochlorite, 15 %
60.00
GLDA, 47 %
1.00
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
Trade Name
Mix Part A
Add Part B in listed order to Part A and mix until
formulation is clear
qs
PROPERT Y
Appearance: colourless, clear gel
pH-value: 11.0 – 12.0
Add Part C
15
F O R M U L AT I O N G U I D E – B AT H R O O M
TOILET LIQUID RIM BLOCK
Part
Active Ingredient
% w/w
A
Water
75.00
B
Carbomer
2.00
Sodium Lauroyl Sarcosinate, 30 %
C
PERLASTAN L-30
(Schill+Seilacher GmbH)
Sodium Laureth Sulfate, 30 %
Zinc Ricinoleate
MGDA, 78 %
D
Sodium Hydroxide, 10 %
E
Preservatives, Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
Heat Part A up to 50 °C
n
Maintain temperature and add Part B while stirring
n
Mix until preparation appears homogeneous
n
Cool down to room temperature while stirring
n
Add Part C in listed order
n
Adjust pH-value with Part D
n
Add Part E
PROPERT Y
Appearance: clear, colourless gel
pH-value: 8.0 – 9.0
16
Trade Name
5.00
15.00
POLYFIX ZRC 30 MT
(Schill+Seilacher GmbH)
2.00
1.00
qs to pH
qs
F O R M U L AT I O N G U I D E – K I T C H E N
HAND DISHWASHING DETERGENT
Part
A
Active Ingredient
% w/w
Water
74.30
MGDA, 78 %
0.20
Sodium Laureth Sulfate, 28 %
15.00
Sodium Lauroyl Sarcosinate, 30 %
B
Trade Name
PERLASTAN L-30
(Schill+Seilacher GmbH)
2.00
Cocamidopropyl Betaine, 38 %
1.50
Glycerin
2.00
Sodium Chloride
5.00
C
Citric Acid
D
Fragrances, Colour, etc.
qs to pH
qs
MANUFACTURING PROCEDURE
n
n
Mix Part A
Add Part B in listed order to Part A
and mix until formulation is clear
n
Adjust pH-value with Part C
n
Add Part D
PROPERT Y
Appearance: clear, colourless, viscous liquid
pH-value: 5.5 – 6.5
17
F O R M U L AT I O N G U I D E – K I T C H E N
HOUSEHOLD DISHWASHER RINSE AID
Part
Active Ingredient
Trade Name
Water
A
B
Sodium Lauroyl Sarcosinate, 30 %
n
PERLASTAN L-30
(Schill+Seilacher GmbH)
2.00
19.40
Propylene Glycol n-Butyl Ether
10.00
C
Citric Acid
D
Fragrances, Colour, etc.
Mix Part A
Add Part B to Part A and mix until formulation
appears clear
n
Adjust pH-value with Part C
n
Add Part D
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 2.5 – 3.5
18
68.60
Alcohol Ethoxylate
MANUFACTURING PROCEDURE
n
% w/w
qs to pH
qs
F O R M U L AT I O N G U I D E – K I T C H E N
OVEN CLEANER
Part
A
B
Active Ingredient
n
n
% w/w
Water
77.00
Sodium Hydroxide, 10 %
15.00
GLDA, 47 %
2.00
Sodium Lauroyl Sarcosinate, 30 %
PERLASTAN L-30
(Schill+Seilacher GmbH)
2.00
Decyl Glucoside, 52 %
2.00
C
Alcohol Ethoxylate
2.00
D
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
Trade Name
Mix Part A
Add Part B and mix until
formulation appears clear
qs
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 12.5 – 13.0
Add Part C
19
F O R M U L AT I O N G U I D E – S P E C I A L
SPONGE IMPREGNATION
Part
A
B
Active Ingredient
52.90
Carbomer
1.50
Allantoin
0.10
25.00
5.00
Cocamidopropyl Betaine, 38 %
7.00
Aloe Barbadensis Miller
0.50
D
Sodium Hydroxide, 10 %
qs to pH
E
Preservatives, Fragrances, etc.
MANUFACTURING PROCEDURE
20
PERLASTAN L-30
(Schill+Seilacher GmbH)
Decyl Glucoside, 52 %
C
n
% w/w
Water
Sodium Lauroyl Sarcosinate, 30 %
n
Trade Name
Add Part B while stirring to Part A
Mix until formulation appears homogeneous
(can be quicker and better dissolved at 30 – 40 °C)
n
Add Part C in listed order
n
Adjust pH-value with Part D (original pH: 5.3 – 5.5)
n
Add Part E
qs
PROPERT Y
Appearance: turbid, colourless liquid
pH-value: 6.5 – 7.5
Viscosity: 550 – 620 mPa*s
(Brookfield, Sp.3, 5 rpm, RT)
F O R M U L AT I O N G U I D E – S P E C I A L
SHOE REFRESHER SPRAY
Part
Active Ingredient
Trade Name
Water
A
B
Zinc Ricinoleate
% w/w
95.90
POLYFIX ZRC 30 MT
(Schill+Seilacher GmbH)
3.00
Alcohol Alkoxylate
1.00
Preservative
0.10
C
Citric Acid
D
Fragrances, Colour, etc.
qs to pH
qs
MANUFACTURING PROCEDURE
n
n
Mix Part A
Add Part B and mix until formulation
appears clear
n
Adjust pH-value with Part C
n
Add Part D
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 6.5 – 7.5
21
F O R M U L AT I O N G U I D E – S P E C I A L
FABRIC REFRESHER “ODOUR NEUTRALIZER”
Part
Active Ingredient
Trade Name
Water
A
Zinc Ricinoleate
B
Ethanol
C
Fragrances, etc.
MANUFACTURING PROCEDURE
n
Mix Part A
n
Add Part B and mix until formulation appears clear
n
Add Part C
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 9.5 – 10.5
22
% w/w
85.00
POLYFIX ZRC 25 GP
(Schill+Seilacher GmbH)
5.00
10.00
qs
F O R M U L AT I O N G U I D E – C A R WA S H
HIGH-PRESSURE CAR CLEANER
Part
A
Active Ingredient
73.00
MGDA, 78 %
5.00
GLDA, 47 %
5.00
n
PERLASTAN L-30
(Schill+Seilacher GmbH)
2.00
Decyl Glucoside, 52 %
3.00
Alcohol Ethoxylate
2.00
Triethanolamine
2.00
Lauryldimethylamine Oxide, 30 %
8.00
C
Citric Acid
D
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
% w/w
Water
Sodium Lauroyl Sarcosinate, 30 %
B
Trade Name
Mix Part A
Add Part B in listed order and mix
until formulation appears clear
n
Adjust pH-value with Part C
n
Add Part D
qs to pH
qs
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 11.0 – 11.5
23
F O R M U L AT I O N G U I D E – C A R WA S H
MILD CAR WASH SHAMPOO
Part
A
Active Ingredient
73.00
MGDA, 78 %
5.00
GLDA, 47 %
5.00
n
24
PERLASTAN L-30
(Schill+Seilacher GmbH)
5.00
Sodium Laureth Sulfate, 30 %
5.00
Cocamidopropyl Betaine, 38 %
2.00
C
Citric Acid
D
Fragrances, Colour, etc.
MANUFACTURING PROCEDURE
n
% w/w
Water
Sodium Lauroyl Sarcosinate, 30 %
B
Trade Name
Mix Part A
Add Part B in listed order and mix
until formulation appears clear
n
Adjust pH-value with Part C
n
Add Part D
qs to pH
qs
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 8.5 – 9.0
F O R M U L AT I O N G U I D E – C A R WA S H
TOUCHLESS CAR WASH CONCENTRATE
Part
A
Active Ingredient
74.00
MGDA, 78 %
7.00
GLDA, 47 %
7.00
n
PERLASTAN L-30
(Schill+Seilacher GmbH)
2.00
Decyl Glucoside, 52 %
4.00
Alcohol Ethoxylate
4.00
C
Sodium Hydroxide, 10 %
2.00
D
Fragrances, Colour, etc.
qs
MANUFACTURING PROCEDURE
n
% w/w
Water
Sodium Lauroyl Sarcosinate, 30 %
B
Trade Name
Mix Part A
Add Part B in listed order and mix
until formulation appears homogeneous
n
Add Part C
n
Add Part D
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 11.5 – 12.5
25
S C H I L L + S E I L A C H E R AT A G L A N C E
BOEBLINGEN
SPECIALITY CHEMICALS FOR:
PIRNA
SPECIALITY CHEMICALS FOR:
FIBRES
SILICONES
TEXTILES
PU INDUSTRY
LEATHER
PAPER
PAPER
TEXTILES
COSMETICS
COSMETICS
FINE CHEMICALS
FIBRES
LEATHER
DIN EN ISO 9001:2015
DIN EN ISO 14001:2015
DIN EN ISO 9001:2015
DIN EN ISO 500001:2011
(ONLY FOR BOEBLINGEN PRODUCTS)
RSPO CERTIFICATION MASS BALANCE
HUDSON / OHIO / USA
HAMBURG
SPECIALITY CHEMICALS FOR:
RUBBER ADDITIVES
ANTIFOAMS
EPOXY PREPOLYMERS
AND FL AME RETARDANTS
L ATEX ADDITIVES
PRODUCER OF:
NANOFIBRE MATRICES
DIN EN ISO 9001:2015
DIN EN ISO 13485:2003
SILICONES
STOW / OHIO / USA
RELEASE AGENTS
SPECIALITY CHEMICALS FOR:
DIN EN ISO 9001:2015
PL ASTICS
DIN EN ISO 14001:2015
WOOD COMPOSITES
DIN EN ISO 500001:2011
RUBBER
LEATHER
DIN EN ISO 9001:2008
26
WWW.SCHILLSEIL ACHER.DE
Disclaimer:
The mentioned attributes and application proposals are only non-binding application possibilities and
application proposals for our products. Our advice and recommendations whether verbal, in writing or by
way of tests do not excuse the customer from his or her own examination regarding the applicability for the
intended procedures and purposes. The mentioned attributes and application proposals are no assurance
for a certain further processing. Any assurances must be agreed upon explicitly and in writing between the
customer and us.
We also advice you, that any further processing and the distribution of the further processed products is
part of the customers sole scope of responsibilities as the producer of the new product.
Any Questions?
Our service team will be pleased to answer any questions
and assist you with advice and information. We can also
provide you with contact data of our local offices, distributors
and agencies. Data sheets and samples of our products
are available upon request.
For more information please contact:
Schill+Seilacher GmbH
Schoenaicher Strasse 205
71032 Boeblingen (Germany)
Phone: + 49 7031 282-241
Fax: + 49 7031 282-446
E-Mail: KHM2018@schillseilacher.de
KHM03.2018
Visit also our site:
www.schillseilacher.de