ATC— AF16
Antifoam for industrial aqueous systems
INTRODUCTION
ATC— AF16 is a strong water based defoamer for water & solvent-based coatings. It can prevent foam and
blisters during manufacturing and application. It is highly efficient and offers optimum defoaming while
utilizing only minimal quantities of incompatible substances. It is extremely suitable for Air-drying systems
based on acrylic, vinyl or chlorinated polymers, Fast-drying industrial and decorative finishes based on
medium- to long-oil alkyd resins and airless spray applications where the solvents evaporate quickly and
rapid defoaming is required. Is suitable for coatings and printing inks.
APPLICATIONS
Printing Inks and Overprint Varnishes
Special Features and Benefits: ATC— AF16 is recommended for defoaming aqueous printing inks and
overprint varnishes based on acrylate/polyurethane and polyurethane. Also for aqueous UV systems.
Recommended Levels: 0.1-1% additive (as supplied) based upon total formulation. The above recommended
levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions: The additive can be added at any time during production. The
amount of defoamer used is often divided (by adding 2/3 into the millbase and 1/3 into the let-down or
finished product).
Coatings Industry
Special Features and Benefits: ATC— AF16 is recommended for defoaming high gloss emulsion systems
based on acrylate/polyurethane and polyurethane in the pigment volume concentration range 0-25. The
additive is effective when used in all standard application methods such as rolling, brushing, spraying and
pouring.
Recommended Levels: 0.1-1% additive (as supplied) based upon total formulation. The above recommended
levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
TYPICAL PROPERTIES
Appearance
Color
Opaque, liquid
White
Density (gm/ml)
0.90 – 1.00
Nature / type
Mineral oil
PACKING
ATC— AF16 is available 200 kg HDPE drums
& 950 kg IBCs.
HEALTH, SAFETY & HANDLING
Use impermeable gloves and chemical
splash goggles when attaching feeding
equipment, doing maintenance or handling
product. Examples of impermeable gloves
available on the market are neoprene,
nitrile, PVC, natural rubber, viton and butyl
(compatibility studies have not been
performed).
The availability of an eye wash fountain and
safety shower is recommended.
If clothing is contaminated, remove clothing
and thoroughly wash the affected area.
Launder contaminated clothing before
reuse.
In case of spills, disposal must be made in
accordance with federal, state and local
environmental regulations.
Incorporation and Processing Instructions: The additive can be added at any time during production. The
amount of defoamer used is often divided (by adding 2/3 into the millbase and 1/3 into the let-down or
finished product).
Please refer to MSDS for further details.
Adhesives
Incorporation and Processing Instructions: The additive can be added at any time during production.
To ensure that the product quality is
maintained, the container should be tightly
sealed when not in use. Store at normal
room temperature, and prevent prolonged
exposure to extreme heat or freezing
conditions, which may cause product
separation. IF SEPARATION DOES OCCUR,
THAW IF FROZEN, STIR THE CONTENTS,
AND USE IN THE NORMAL MANNER.
TECHNICAL SUPPORT
FIRE RISKS
For further information about the product, addition, storage, mixing, consults your consultant or local
representative.
ATC— AF16 is not flammable.
Please refer to MSDS for further details.
Special Features and Benefits: ATC— AF16 is recommended for defoaming aqueous emulsion adhesives.
Recommended Levels: 0.05-1% additive (as supplied) based upon total formulation. The above
recommended levels can be used for orientation. Optimal levels are determined through a series of
laboratory tests.
STORAGE & DISPOSAL
All information and data given herein are believed to be accurate and reliable and are based on data available with Raed Abdualsttar Albrahim Chemicals Factory. Since we have no control over the use of this information by
others, we cannot accept any liability whether direct or indirect arising from the use of this information and do not provide any guarantees of whatever nature on the results and performance of this product. This information
is intended for use by technically trained personnel at their direction and risk.
‫ﻣﺼﻨﻊ رائد عبد الستار البراهيم لﻠكيماويات‬
Raed Abdualsttar Albrahim Chemicals Factory
P a g e |1