Closet Rod Supports
2
1X2’s 64 inches Long
2
1 ½” Heavy Duty Metal Closet Poles Cut to 46 3/8 inches Long
10
Wood Screws #6 X 1 ¼ inches
1
Can Stain to match interior of closet
1
Can Clear Satin Polyurethane
NOTE: All materials purchased from Home Depot
Cut each piece of heavy duty shelf rod to 46 3/8 inches long.
Cut two 1 5/8 inch holes with hole saw in each (1x2) 1 ¼ inch and 34 inches to center from top of
each 1x2.
Sand the two 1x2’s, stain and coat with 2 coats of polyurethane. Let dry.
Install one of the 1x2 supports to one side of the closet with 5 of the screws to hold it to the wall.
Install one side of the two poles into the other support and them place the other end of the 2 pole
in the holes of the support screwed to the wall. Slide the support not attached with the poles
inserted against the other wall and attach with the other 5 screws.
46 3/8”
11/4”
34”
Screw Positions
Same each side