MODEL 55C
ECONOMY LIQUID FILTER
FLOW RATES UP TO 760 LPM
A NEW ERA IN FILTRATION PERFORMANCE AND INNOVATION TM
ISO 9001
CHEMELEAN
Liquid Housings & Cartridges
®
Looking for an easy to use, versatile filter to blend right into your
existing piping? Chemelean® housings and cartridges offer versatility
to adapt to a wide variety of process liquid applications up to 757 lpm.
Chemelean® cartridges come in a wide range of media choices for
12.7mm
suitable fluid compatibility.
STANDARD FEATURES
203.2mm Diameter
ASME Code Section VIII, Div. 1
Carbon Steel Construction
Swing Bolt Closure
Inlet/Outlet 50.8mm FNPT
Drain 25.4mm FNPT
DP Ports 12.7mm FNPT
Carbon Steel Housing Dual Rating
• 19 bar at 121o C without
Corrosion Allowance
• 10.3 bar at 121o C with
3.2mm Corrosion Allowance
316L Stainless Steel Housing Rating
• 10.3 bar at 121o C without
Corrosion Allowance
SSPC-SP6 Sandblast
1 Coat Polyurethane
OPTIONS
CARTRIDGE SIZE & STYLE
Inlet/Outlet Flange Connections
Double Open Ended Cartridges (DOE)
Clamp Support Legs or Saddle
152.4mm Diameter
Closure Gasket Materials
508mm or 1016mm Length
25.4 mm
25.4 mm VENT
25.4 mm
DRAIN
Cartridge
Length
In/Out
Number of
Cartridges
A
B
C
D
E
F
G
H
I
55C-1-620-8275-CS-STD
508mm
50.8mm Cplg
1
219.070
676.275
873.125
168.275
231.775
415.925
647.700
1352.550
1050.925
55C-1-640-8275-CS-STD
1016mm
50.8mm Cplg
1
219.070
1184.275
1381.125
168.275
231.775
415.925
647.700
1860.550
1558.925
Model
Note: Dimensions are a general reference only.
HOUSING NOMENCLATURE
55C
1
620
8
275
CS
STD
Model
# Cartridges
Cartridge Size
Housing
Diameter
inches
Design Pressure
PSIG
Material of
Construction
Design
Chemelean
Housing
®
620 = 6” (152.4mm) OD
x 20” (508mm) L, DOE
640 = 6” (152.4mm) OD
x 40” (1016mm) L, DOE
275=Carbon Steel
150=316L Stainless
CS = Carbon Steel
SS = 316L Stainless
STD = Standard
CST = Custom
DOE - double open end
style end caps
HOUSING MODELS
CARBON STEEL STANDARD HOUSINGS
STAINLESS STEEL STANDARD HOUSINGS
Item# 23832 FLT 55C- 1-620-8- 275-CS-STD
Item# 23753 FLT 55C- 1-640-8- 275-CS-STD
Item# 24838 FLT 55C- 1-620-8- 150-SS-STD
Item# 24836 FLT 55C- 1-640-8- 150-SS-STD
Comes standard with the following buna-N closure gasket:
Item# 23477 GSKT BUNA-N .275 RD x 9.375 OD
90 DURO
Comes standard with the following buna-N closure gasket:
Item# 24907 GSKT BUNA-N leave as .275 RD x 9.375 OD
70 DURO
ADDER OPTIONS
SUPPORTS
Legs for Vertical Housing Support
Item# 23433 CHEMELEAN VERTICAL HOUSING
STAND 8 INCH
FLANGES
50.8mm 150# Carbon Steel Threaded Inlet
and Outlet Flange Connections (for carbon steel
housings) Item# 25109 FLG 105 150 TDRF 2 SET
CLOSURE GASKETS
EPDM Gasket
Item# 25762 GSKT EPDM
.275 RD x 9.375 OD 70 DURO
Viton® Gasket
Item# 25763 GSKT VTON
.275 RD x 9.375 OD OD 90 DURO
Saddle for Horizontal Housing Support
Item# 25826 CHEMELEAN HORIZONTAL HOUSING
STAND 8 INCH SET
50.8mm 150# Stainless Steel Threaded Inlet
and Outlet Flange Connections
(for stainless steel housings)
Item# 25110 FLG 316L 150 TDRF 2 SET
Buna-N Gasket
Item# 24907 GSKT BUNA-N
.275 RD x 9.375 OD OD 70 DURO
Item# 23477 GSKT BUNA-N
.275 RD x 9.375 OD OD 90 DURO
ADDER OPTIONS AND CARTRIDGES ARE TO BE PURCHASED & SHIPPED SEPARATELY
FLOW RATE VS. DIFFERENTIAL PRESSURE (Bar)
USING PLEATED CARTRIDGE
PSID Calculations for Fluids Greater Than 1 cP
3 cP = Chart Value times 1.12 • 7 cP = Chart Value times 1.33 • 15 cP = Chart Value times 1.66
508mm CARTRIDGE (1 cP)
LPM
1μm
5μm
10μm
20μm
30μm
40μm
70μm
100μm
95
0.028
0.021
0.017
0.01
0.008
0.006
0.003
0.002
190
0.066
0.048
0.034
0.027
0.022
0.018
0.012
0.007
285
0.107
0.083
0.062
0.048
0.042
0.037
0.027
0.017
380
0.155
0.124
0.097
0.078
0.071
0.064
0.047
0.033
1016mm CARTRIDGE (1 cP)
LPM
1μm
5μm
10μm
20μm
30μm
40μm
70μm
100μm
190
0.028
0.021
0.017
0.01
0.008
0.006
0.003
0.002
380
0.066
0.048
0.034
0.027
0.022
0.018
0.012
0.007
570
0.107
0.083
0.062
0.048
0.042
0.037
0.027
0.017
760
0.155
0.124
0.097
0.078
0.071
0.064
0.047
0.033
RECOMMENDED MAXIMUM FLOW
For PEACH® depth cartridge multiply flow rate by 0.75
508mm CARTRIDGE
1 cP
380 lpm
3 cP
340 lpm
7 cP
285 lpm
15 cP
230 lpm
1016mm CARTRIDGE
1 cP
760 lpm
3 cP
680 lpm
7 cP
565 lpm
15 cP
455 lpm
CARTRIDGE SELECTION GUIDE FOR COMMON APPLICATIONS
Water or Amine
Condensate
Hot Hydrocarbons
Lube Oil
Glycol
Pleated Cartridge
CM-L-xxxxE
CM-G!-xxxxV
CM-GHT1-xxxxV
CM-C1-xxxxB
CM-E-xxxxV
PEACH® Cartridge
CM-PCHL-xxxxE
CM-PCHE-xxxxV
N/A
CM-PCHE-xxxxB
CM-PCHE-xxxxV
Max. Temp
82o C
121o C (116o C PEACH®)
177o C
121o C (116o C PEACH®)
116o C
pH Range
0-14
3-9
3-11
3-11
3-9
xxxx = Cartridge Length & Micron Rating
AVERAGE CONTAMINANT LOADING CAPACITY
Contaminant Loading (kgs)
Max. Recommended
Differential Pressure (Bar)
508mm Cartridge
3.6
2.4
1016mm Cartridge
7.3
2.4
Cartridges tested using ISO Test Dust in water.
Contaminant loading based on lab testing with pleated cartridges. Results may vary under field conditions.
CARTRIDGE NOMENCLATURE
CM
L
2
050
E
Model
Standard
Configuration Codes
Cartridge Size
Micron Rating
Seal Material
Chemelean® Cartridges
2 = 6” (152.4mm) OD x 20”
(508mm) L
4 = 6” (152.4mm) OD x 20”
(1016mm) L
E – Pleated Polyester
Tin Plated Steel Louvered Canbody, Core, End Caps
Buna Seal
Temp Limit: 116o C
Micron Ratings: 5, 10, 20, 40, 70, 100
Efficiency Rating: 99.98%
L – Pleated Polypropylene
Tin Plated Steel Louvered Canbody, Core, End Caps
EPDM Seal
Temp Limit: 82o C
Micron Ratings: 5, 10, 20, 40, 70, 100
Efficiency Rating: 99.98%
G1 – Pleated Fiberglass/Acrylic Backing
Tin Plated Louvered Canbody, Core, End Caps
Viton® Seal
Temp Limit: 121o C
Micron Ratings: 1, 5, 10, 20, 30
Efficiency Rating: 99.98%
G2 – Pleated Fiberglass/Acrylic Backing
Corrosion Resistant Canbody, Core, End Caps
Viton® Seal
Temp Limit: 121o C
Micron Ratings: 1, 5, 10, 20, 30
Efficiency Rating: 99.98%
GHT1* – Pleated Fiberglass/Epoxy Backing
Tin Plated Louvered Canbody, Core, End Caps
Viton® Seal
Temp Limit: 177o C
Micron Ratings: 1, 5, 10, 20, 30
Efficiency Rating: 99.98%
GHT2* – Pleated Fiberglass/Epoxy Backing
Corrosion Resistant Canbody, Core, End Caps
Viton® Seal
Temp Limit: 177o C
Micron Ratings: 1, 5, 10, 20, 30
Efficiency Rating: 99.98%
* When using cartridges for temperatures
rated above 121o C, housing rating should be
re-evaluated by engineering.
010 = 1 micron
050 = 5 micron
100 = 10 micron
200 = 20 micron
300 = 30 micron
400 = 40 micron
700 = 70 micron
1000 = 100 micron
B = Buna-N
E = EPDM
V = Viton®
See configuration
codes for
available ratings
for each material.
Changes to suggested
seal material code
could change
temperature
limit for cartridge.
See configuration
codes for suggested seal
material for
selected media.
PCHL – PEACH® Polypropylene Depth
Tin Plated Steel Core, End Caps
EPDM Seal
Temp Limit: 82o C
Micron Ratings: 5, 10, 20, 40, 70
Efficiency Rating: 90%
PCHE – PEACH® Polyester Depth
Tin Plated Steel Core, End Caps
Buna Seal
Temp Limit: 116o C
Micron Ratings: 5, 10, 20, 40, 70
Efficiency Rating: 90%
C1 – Pleated Cellulose
Tin Plated Louvered Canbody, Core, End Caps
Buna Seal
Temp Limit: 121o C
Micron Ratings: 5, 10, 20, 40
Efficiency Rating: 90%
C2 – Pleated Cellulose
Corrosion Resistant Canbody, Core, End Caps
Buna Seal
Temp Limit: 121o C
Micron Ratings: 5, 10, 20, 40
Efficiency Rating: 90%
Economy Liquid Filters
World Headquarters
PECOFacet (US), Inc.
P.O. Box 640
Mineral Wells, Texas 76068
Phone:
940-325-2575
Toll Free: 800-877-7326
Fax:
940-325-4622
The PECOFacet Chemelean® series liquid housings and
cartridges offer versatility to adapt to a wide variety of process
liquid applications up to 760 lpm. The housings come in two
sizes to hold either a 508mm length cartridge or 1016mm length
cartridge. Chemelean® cartridges come in a wide range of media
choices for suitable fluid compatibility.
• Stock units are available in 203.2mm diameter at 150# ANSI rating
• 50.8mm FNPT standard connections with option for changing to
50.8mm flange connections
o
• Carbon steel unit dual rated: 275 psig at 121 C without corrosion allowance
and 150 psig at 121°C with 3.175mm corrosion allowance
o
• Stainless steel unit rated: 150psig at 121 C without corrosion allowance
PECOFacet has offices worldwide. Visit
www.pecofacet.com/About-Us/Locations
to find an office near you.
For inquiries email:
sales@pecofacet.com
Visit our website to find:
• Installation & Operating Instructions
• Housing Registration Form
• Associated cartridge information
• Most current literature editions
Model 55C
YOUR
CONTAMINANT
MANAGEMENT
PARTNER SM
pecofacet.com
Long Life ALternAtive to BAg Housings!
Contaminant Loading Comparison
Typical #2 Bag
1X Loading
508mm Pleated Chemelean
®
8X Loading
1016mm Pleated Chemelean
®
16X Loading
Data based on laboratory testing
Tired of changing out bag filters so often? Before you
buy your next bag filter housing, consider purchasing a
Chemelean® filter housing instead!
Chemelean® filters provide excellent contaminant
loading so cartridge change-out typically becomes less
frequent than a bag...and that keeps your process up
and running!
Cartridge Model CM
Available in pleated polypropylene, polyester, glass
or cellulose and PEACH ® polyester or polypropylene.
©2016 PECOFacet
PECOFacet has a policy of
continuous product research
and development and reserves
the right to change design and
specifications without notice.
pecofacet.com
Viton is a registered trademark of E.I. du Pont de Nemours and Company.
OG-CHML-SL-01 (PFMW-201609 A4)
PECOFacet, Chemelean and PEACH are trademarks of PECOFacet.
® indicates a PECOFacet trademark registered in the USA and various other countries.