Uploaded by ganadejehiel

Electrical Installation and Maintenance Grade 10 Module 1

advertisement
10
Technology & Livelihood Education
Electrical Installation and
Maintenance
Learner’s Material
DRAFT
GOVERNMENT PROPERTY
NOT FOR SALE
ALLOTTED TO
District/ School: _______________________________________
Division _____________________________________________
First Year of Use: ______________________________________
Source of Fund (Year included):__________________________
Department of Education
Republic of the Philippines
1
Technology & Livelihood Education– Grade 10
Learner’s Material
First Edition, 2014
ISBN: ___________
Republic Act 8293, section 176 states that: No copyright shall
subsist in any work of the Government of the Philippines. However, prior
approval of the government agency or office wherein the work is created shall
be necessary for exploitation of such work for profit. Such agency or office
may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos,
brand names, trademarks, etc.) included in this book are owned by their
respective copyright holders. DepEd is represented by the Filipinas Copyright
Licensing Society (FILCOLS), Inc. in seeking permission to use these
materials from their respective copyright owners. The publisher and authors
do not represent nor claim ownership over them.
Published by the Department of Education
Secretary: Br. Armin A. Luistro FSC
Undersecretary: Dina S. Ocampo, PhD
DRAFT
Development Team of the Learner’s Material
Consultants: Alfredo L. Alcala Jr., Lorenzo A. Ladia and Famy I. Pepito
Authors:
ROMAN A. CABUSORA JR.
MARINO C. CUETO
Master Teacher I/ NC II
EPS I-EPP/TLE/TVE/ NC II
San Francisco High School
Division of Calapan City
Division of Quezon City
Region IV-B (MIMAROPA)
Editors: Lando T. Guzman, Lynnette Guzman Lak-Ayen, Eugenio Masilungan,
Leonardo O. Munalim, and Heidi Macahilig
Reviewers: Arnel C. Anonical, Joel G. Castillo, Arnold M. Mendoza, Vladimir H. Santos,
Noreen M. Zafranco, Marvin A. Mendoza, Lino A. Olit, Atanascio D.
Pagkaliwangan, Rainbee Priol and Benjie R. San Juan.
Illustrators: Ruel C. Quindoy and Jose Leo Vic O. Albano
Subject Specialists: Albert B. Erni, James Julius M. Liquigan, and Owen M.
Milambiling
Management Team: Jocelyn DR Andaya, Bella O. Mariñas and
Jose D. Tuguinayo Jr.
Layout Artist: Mark Anthony E. Jalandoni
Printed in the Philippines by ____________
Department of Education-Instructional Materials Council
Secretariat (DepEd-IMCS)
Office Address:5th Floor Mabini Building, DepEd Complex
Meralco Avenue, Pasig City
Philippines 1600
Telefax:
(02) 634-1054, 634-1072
E-mail Address:
imcsetd@yahoo.com
2
DRAFT
3
TABLE OF CONTENT
Personal Entrepreneurial Competencies (PECs)
Environment and Market (E & M)
Process and Delivery (P & D)
Quarter I
Introduction
Pre-Diagnostic Test
Information Sheet 2.1 Wires and Cables
Self-Checked 2.1 Wires and Cables
Information Sheet 2.2 Common Electrical Symbols
Self-Check 2.2 Analyze Electrical Symbols
Information Sheet 2.3 Wiring Diagrams
Self Check 2.3 Wiring Diagram
Activity Sheet 2.1 Wiring Diagram
Information Sheet 2.4 Flexible Armored Cable Wiring
Self Check 2.4 Flexible Armored Cable Wiring
Activity Sheet 2.2 Flexible Armored Cable Wiring Installation
Activity Sheet 2.3 Flexible Armored Cable Wiring Installation
Information Sheet 2.5 Non-Metallic Sheathed Cable
Self-Check 2.5 Non-Metallic Sheathed Cable
Information Sheet 2.6 Flexible Metallic Tubing (FMT)
Self-Check 2.6 Flexible Metallic Tubing
Activity Sheet 2.4 Cut Flexible Metallic Tubing
Activity Sheet 2.5 Install Flexible Metallic Tubing (FMT)
Summative Test - Quarter I
Quarter II
Introduction
Pre-Diagnostic Test
Information Sheet 2.7 Rigid Steel Conduit (RSC)
Self-Check 2.7 Rigid Steel Conduit
Activity Sheet 2.6 Ream Rigid Steel Conduit
Activity Sheet 2.7 Bend Rigid Steel Conduit (Elbow Bend)
Activity Sheet 2.8 Bend Rigid Steel Conduit (Offset Bend)
Activity Sheet 2.9 Install Rigid Steel Conduit
Information Sheet 2.8 Intermediate Metallic Tubing (IMT)
Self-Check 2.8 Intermediate Metallic Tubing
DRAFT
4
PAGE
Activity Sheet 2.10 Install Intermediate Metallic Tubing (IMT)
Information Sheet 2.9 Ra Act 7832- Anti-Electric and Electric Transmission Line/Materials Pilferage Act Of 1994
Self Check 2.9 Republic Act No. 7832
Summative Test - Quarter II
Quarter III & IV
Introduction
Pre-Diagnostic Test
Information Sheet 1.1 Interpret Electrical Wiring Plan
Self Checked 1.1 Interpret Electrical Wiring Plan
Information Sheet 1.2 Type of Wiring Devices
Self-Check 1.2 Type of Wiring Devices
Information Sheet 1.3 Select Tools and Equipment
Self Check 1.3 Select Tools and Equipment
Activity Sheet 1.1 Select Tools and Equipment
Information Sheet 2.1 PEC provision in installing electrical boxes
Self Checked 2.1 Electrical Boxes
Activity Sheet 2.1 Installing Box in Finished Space
Activity Sheet 2.2 Installation of Electrical Boxes in Wiring Board
Information Sheet 2.2 NEC Provisions on Installing Wiring Devices
Activity Sheet 2.3 Installation of Wiring Devices for Floor and
Ground Fault Current Interrupting Outlets
Summative Test - Quarter III
Quarter IV
Information Sheet 2.3 Observe Safety Procedure
Self Check 2.2 Observe Safety Practices
Activity Sheet 2.4 Install Flexible Metal Tubing (FMT)
Activity Sheet 2.5 Install Electrical Metallic Tubing
Activity Sheet 2.6 Install Intermediate Metallic Tubing (IMT)
Activity Sheet 2.7 Install Rigid Steel Conduit (RMC)
Summative Test - Quarter IV
Technical Terms
References
DRAFT
5
Related documents
Download