Work Permit
OPCW-CMT-14/F6 (10-Oct-11)
Work Details
Type of Permit:
Project:
Permit Applicant:
Work Permit
Permit No. 04
Date: May,08-May 15, 2021
Position: Architect
Date / Time Commence: 7:00AM – 5:00PM/ May,08-May 15, 2021
Date / Time Complete:
7:00AM – 5:00PM/ May,08-May 15, 2021
Painting Works, Electrical Works, Plumbing Works, Masonry Works, Roofing Installation
Landscaping Works
Validity of Permit:
Nature of Work:
Trade of Work:
Location:
Block 49 Lot 10, Highway Improvement, Block 46 Lot 39,
Block 47 Lot 50, Block 64 Lot 55, Block 67 Lot 62, Block 70
Lot 49
No. of Workers;55
Tools & Equipment Details:
*indicate all tools & equipment to be used
Hose
One Bagger
Cement
Water
Cut-off
Backhoe
Drill
Cutting wheel
Mini Dump truck
Grinder
Painting Materials
Existing / Potential Hazards & Recommended Control Measures Actions:
*indicate all hazards identified and mitigating measures to be performed.
Hazard
Mitigating Measures
Flask from The Welding Area
Provide Welding Mask and glasses and keep away from the
working activity
Wear a PPE uniform and keep away from the Structural Activities
Falling Object from the Structural
Activities.
Concrete Pouring of Raised Table.
Scaffold
Scraft Materials and chemical dust
from the near housing,
Put a Mask or improvised clothes and keep the mask wet
Use a proper Safe Full body Harness
Proper Housekeeping and provide a mask of alternative clothes
to protect their sense of smell
Personal Protective Equipment & Safety Equipment / Devices Details:
*indicate all PPE & safety equipment / devices required:
Hardhat
Safety Shoes
Safety Vest
Safety Boots
Gloves
Safety Welding Mask
Long sleeves
Full Body Harness
Gas Testing Details:
*for entry to confined space or hot works on tanks, pipes, etc. which previously contained flammable materials
Oxygen Level:
Gas Test Readings:
Time Tested:
Flammability:
H2S:
Area Tested:
CO:
Inspection & Approval:
*all signatories shall be aware of the responsibilities laid down in this permit.
Permit Applicant:
I confirm that the safety precautions specified will be
observed
Supervising Engineer:
I am aware of the job to be done and the precautions to
be taken
Engineer/Architect:
I have checked and certified that all precautions
established are adequate to protect all workers
Name & Signature
Name & Signature
Name & Signature
Work Permit
OPCW-CMT-14/F6 (10-Oct-11)
Work Details
Type of Permit:
Project:
Permit Applicant:
Work Permit
Permit No. 04
Seafront Residences
Date: May,08-May 15, 2021
JSL Enterprises
Position: Architect
Date / Time Commence: 7:00AM – 5:00PM/ May,08-May 15, 2021
Date / Time Complete:
7:00AM – 5:00PM/ May,08-May 15, 2021
Painting Works, Electrical Works, Plumbing Works, Masonry Works, Roofing Installation
Landscaping Works
Validity of Permit:
Nature of Work:
Trade of Work:
Location:
Block 49 Lot 10, Highway Improvement, Block 46 Lot 39,
Block 47 Lot 50, Block 64 Lot 55, Block 67 Lot 62, Block 70
Lot 49
No. of Workers;55
Tools & Equipment Details:
*indicate all tools & equipment to be used
Hose
One Bagger
Cement
Water
Cut-off
Backhoe
Drill
Cutting wheel
Mini Dump truck
Grinder
Painting Materials
Existing / Potential Hazards & Recommended Control Measures Actions:
*indicate all hazards identified and mitigating measures to be performed.
Hazard
Mitigating Measures
Flask from The Welding Area
Provide Welding Mask and glasses and keep away from the
working activity
Wear a PPE uniform and keep away from the Structural Activities
Falling Object from the Structural
Activities.
Concrete Pouring of Raised Table.
Scaffold
Scraft Materials and chemical dust
from the near housing,
Put a Mask or improvised clothes and keep the mask wet
Use a proper Safe Full body Harness
Proper Housekeeping and provide a mask of alternative clothes
to protect their sense of smell
Personal Protective Equipment & Safety Equipment / Devices Details:
*indicate all PPE & safety equipment / devices required:
Hardhat
Safety Shoes
Safety Vest
Safety Boots
Gloves
Safety Welding Mask
Long sleeves
Full Body Harness
Gas Testing Details:
*for entry to confined space or hot works on tanks, pipes, etc. which previously contained flammable materials
Oxygen Level:
Gas Test Readings:
Time Tested:
Flammability:
H2S:
Area Tested:
CO:
Inspection & Approval:
*all signatories shall be aware of the responsibilities laid down in this permit.
Permit Applicant:
I confirm that the safety precautions specified will be
observed
Supervising Engineer:
I am aware of the job to be done and the precautions to
be taken
Engineer/Architect:
I have checked and certified that all precautions
established are adequate to protect all workers
Ar. Bryan Amiel Lao
Name & Signature
Name & Signature
Name & Signature