ECUBE Company profile Hebei Ecube New Energy Technology Co., Ltd., with a registered capital of 15 million USD, is a high-tech enterprise specializing in energy storage and lithium battery system integration. Relying on the technical team of the leading enterprises in the power electronics industry, Ecube has built a core technical team with more than ten years of experience in the development and application of lithium battery and power supply products, and independently developed the industry-leading battery management system with excellent security, stability and balance capabilities. The products cover four business sectors: Industrial and commercial energy storage system, renewable integration, uninterrupted power lithium battery system and residential energy storage system. In recent years, the projects have spread to key overseas markets such as South Korea, Russia, the Netherlands, Germany, the Middle East, etc Our Mission Driven by technological innovation and guided by customer demand, with the mission of promoting the friendly use of clean energy and creating a low-carbon and environmental friendly future life, Ecube is committed to provide a safe, stable , efficient and low-cost energy storage system and integrated energy storage solutions such as standby power supply, micro grid, peak shaving, frequency regulation, load management,on/off grid seamless switching,ect . It is an excellent designer and provider of innovative intelligent energy storage system in the industry. ADVANTAGES FOCUS ON ENERGY STORAGE BMS INDEPENDENT RESEARCH & DEVELOPMENT Years of EPC experience of energy storage projects at power generation side and power consumption side at home and abroad Advanced three-level management structure Proven power manegement technologies for energy storage application Exclusive cells , pack design, BMS design and PCS technologies for energy storage CUSTOMIZED DESIGN Cooperate with many Top cell manufacturers Customized BMS, Pack and Container Customized energy storage system / power station solution Mature active / passive balancing Industry-leading balancing ability, signal acquisition accuracy, SOC accuracy OVERALL SOLUTION Peak shaving and frequency modulation solution Microgrid solution New energy charging station On/off grid energy storage solution Wind, solar, diesel and battery,multi energy complementation solution Production line Products l Li-ion Battery System l PCS Power Conversion System l GRES PCS+Battery System Industrial and Commercial Li-ion Battery System Ø High Energy Durable Li-ion Battery System (50AH-280Ah system) Ø High C-rate Powerful Li-ion Battery System (2C-8C discharging system) Ø Rack-mounted UPS Li-ion Battery System (Standard 48V, high voltage 240V module) Products Rack-mounted UPS Battery System Li-ion Battery System High C-rate Battery System 2C-5C dischargng LTO 2U module: 48V 10Ah/30Ah 240V 10Ah 480V 40Ah/80Ah/120Ah/160Ah 768V 40Ah/80Ah/120Ah/160Ah LFP 2U module : 48V 10Ah/30AH 240V 10Ah Ecube High Energy Battery System LFP 4U module:48V 50Ah/100Ah 480V 50Ah/100Ah/150Ah/280Ah 768V 50Ah/100Ah/150Ah/200Ah Rack Mount Battery Module LiFePO4 EFS48-30PⅣB EFS48-50PⅣB EFS48-100PⅣB EFS240-10PⅣB Rated Voltage (V) 48 48 48 240 System Capacity (Ah) 30 50 100 10 Max. Continuous Charging Current (A) 30(1C) 50(1C) 100(1C) 10(1C) Max. Continuous Discharging Current (A) 120(4C) 100(2C) 200(2C) 20(2C) Size (W*D*H) (mm) 483*475*88 483*650*88 483*555*201 483*650*88 Weight (kg) 25 32 55 32 Charging Ambient Temperature 0~55℃ 0~55℃ 0~55℃ 0~55℃ Discharging ambient temperature -20~60℃ -20~60℃ -20~60℃ -20~60℃ Life Cycle 25℃ 0.5C/0.5C 100%DOD EOL80% ≥3000 25℃ 0.5C/0.5C 100%DOD EOL80% ≥3000 25℃ 0.5C/0.5C 100%DOD EOL80% ≥3000 25℃ 0.5C/0.5C 100%DOD EOL80% ≥4000 Rack Mount Battery Module LTO ETS48-10PⅣB ETS48-30PⅣB ETS240-10PⅣB Rated Voltage (V) 48 48 240 System Capacity (Ah) 10 30 10 Max. Continuous Charging Current (A) 20(2C) 60(2C) 20(2C) Max. Continuous Discharging Current (A) 80(8C) 240(8C) 80(8C) Size (W*D*H) (mm) 483*475*88 483*555*132.5 483*720*132.5 Weight (kg) 20 32 45 Charging Ambient Temperature -40~60℃ -40~60℃ -40~60℃ Discharging ambient temperature -40~60℃ -40~60℃ -40~60℃ Life Cycle 25℃ 0.5C/0.5C 100%DOD 25℃ 0.5C/0.5C 100%DOD 25℃ 0.5C/0.5C 100%DOD EOL80% ≥16000 EOL80% ≥16000 EOL80% ≥16000 High C-rate Battery System 480V System EFS480-40PIIB EFS480-80PIIB EFS480-120PIIB EFS480-160PIIB Rated Voltage (V) 480 480 480 480 System Capacity (Ah) 40 80 120 160 Max. Continuous Charging Current(A) 80(2C) 160 (2C) 240 (2C) 320(2C) Max. Continuous Discharging Current(A) 200 (5C) 320 (4C) 480(4C) 480 (3C) Size (W*D*H)(mm) 600*550*2000 600*750*2000 600*950*2000 600*1150*2000 Weight(kg) 335 555 725 1000 Charging Ambient Temperature 0~55℃ 0~55℃ 0~55℃ 0~55℃ Discharging ambient temperature -20~60℃ -20~60℃ -20~60℃ -20~60℃ Life Cycle 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 High C-rate Battery System 768V System EFS768-40PIIB EFS768-80PIIB EFS768-120PIIB EFS768-160PIIB Rated Voltage (V) 768 768 768 768 System Capacity (Ah) 40 80 120 160 Max. Continuous Charging Current (A) 80(2C) 160 (2C) 240 (2C) 320(2C) Max. Continuous Discharging Current (A) 200 (5C) 320 (4C) 480(4C) 480 (3C) Size (W*D*H)(mm) 1000*550*1600 1000*750*1600 1000*950*1900 1000*1150*1900 Weight (kg) 486 855 1145 1600 Charging Ambient Temperature 0~55℃ 0~55℃ 0~55℃ 0~55℃ Discharging ambient temperature -20~60℃ -20~60℃ -20~60℃ -20~60℃ Life Cycle 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 High Energy Battery System 480V System EFS480-50EIIB EFS480-100EIIB EFS480-150EIIB EFS480-200EIIB Rated Voltage (V) 480 480 480 480 System Capacity (Ah) 50 100 150 200 Max. Continuous Charging Current (A) 50 (1C) 100 (1C) 150 (1C) 200 (1C) Max. Continuous Discharging Current (A) 100 (2C) 200 (2C) 300 (2C) 400 (2C) Size (W*D*H)(mm) 600*550*2000 600*750*2000 600*950*2000 600*1150*2000 Weight (kg) 335 555 725 1000 Charging Ambient Temperature 0~55℃ 0~55℃ 0~55℃ 0~55℃ Discharging ambient temperature -20~60℃ -20~60℃ -20~60℃ -20~60℃ Life Cycle 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 High Energy Battery System 768V System EFS768-50EIIB EFS768-100EIIB EFS768-150EIIB EFS768-200EIIB Rated Voltage (V) 768 768 768 768 System Capacity (Ah) 50 100 150 200 Max. Continuous Charging Current (A) 50 (1C) 100 (1C) 150 (1C) 200 (1C) Max. Continuous Discharging Current (A) 100 (2C) 200 (2C) 300 (2C) 400 (2C) Size (W*D*H)(mm) 1000*550*1600 1000*750*1600 1000*950*1900 1000*1150*1900 Weight (kg) 486 855 1145 1600 Charging Ambient Temperature 0~55℃ 0~55℃ 0~55℃ 0~55℃ Discharging ambient temperature -20~60℃ -20~60℃ -20~60℃ -20~60℃ Life Cycle 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 25℃ 1C/1C 100%DOD EOL80% ≥4000 Mult-functional Power Conversion System(MPCS) Ø Flexible structure and on-demand configuration Ø Multi Energy access,intelligent Multi-energy management Ø Mudular design, 50KVA-600KVA, Ø Fast expansion and convenient maintenance Products EIPS Power Conversion System (50KVA-100KVA) HIPS (150KVA-250KVA) Module: 50kw DC Range: 700~900Vdc 550~900Vdc with isolated transformer (300KVA-400KVA) WIPS Ecube (500KVA-600KVA) (50KVA-100KVA) Module: 50kw DC Range: 200~900Vdc (150KVA-250KVA) Module: 100kw DC Range: 700~900Vdc 550~900Vdc with isolated transformer Power Conversion System Model Battery interface parameters EIPS-50/50 Voltage range Max DC channel Qty EIPS-100/50 1 2 Rated Current 100KW 75A 151A Rated frequency 50Hz/60Hz Frequency range ±2Hz Power factor 1 Output harmonics ≤3% 100KW 303A 379A 150KW 200KW 250KW 303A 379A AC 380V/400V/415V Rated frequency 50Hz/60Hz 75A 151A 227A Voltage accuracy 1% Frequency accuracy ±0.2Hz Output voltage harmonics 3%@ linear full load Unbalanced load capacity 100% Overload capacity 105%:running time≥10min;120%:running time≥1min Working temperature -20℃~55℃(>45℃derating) Storage temperature -40℃~70℃(No battries) 0%RH~95%RH,No condensation Relative humidity Working altitude <45℃,2000m;2000m~4000m Derating Noise <75dB Comminication CAN/RS485 Transformer isolation optional Isolation Protection Others 250KW 3W+N+PE/3W+PE 50KW Rated voltage Environment 200KW 227A Output line AC off-grid parameters 150KW -15%~+10% Rated Current 5 AC 380V/400V/415V Voltage range Rated power 4 3W+N+PE/3W+PE 50KW Rated voltage AC grid-connected parameters IP20 Air cooling, intelligent fan regulation Cooling Maximum efficiency Dimension W*D*H Weight EIPS-250/50 85A Output line Rated power EIPS-200/50 3 Single channel maximum current EIPS EIPS-150/50 DC700V~DC900V( DC550V~DC900V with transformer) 98.5%(no transformer) 600*800*2000 300kg 330kg 1200*800*2000 500kg 530kg 560kg Power Conversion System Model Battery interface parameters HIPS EIPS-300/100 Voltage range Max DC channel Qty EIPS-400/100 4 5 Single channel maximum current 170A Output line 3W+N+PE/3W+PE Rated power Rated Current 300KW 400KW 454A 606A Rated frequency 50Hz/60Hz ±2Hz Power factor 1 Output harmonics ≤3% 400KW 500KW 606A Voltage accuracy 758A Frequency accuracy ±0.2Hz 3%@ linear full load 100% 105%:running time≥10min;120%:running time≥1min Working temperature -20℃~55℃(>45℃derating) Storage temperature -40℃~70℃(No battries) Relative humidity 0%RH~95%RH,No condensation Working altitude <45℃,2000m;2000m~4000m Derating Noise <75dB Comminication CAN/RS485 Isolation Transformer isolation optional Protection IP20 Cooling Air cooling, intelligent fan regulation Maximum efficiency 98.5%(no transformer) Weight 909A 1% Output voltage harmonics Dimension W*D*H 600KW 50Hz/60Hz 454A Unbalanced load capacity Others 909A AC 380V/400V/415V Rated frequency Overload capacity 600KW 3W+N+PE/3W+PE 300KW Rated voltage Environment 758A Frequency range Output line AC off-grid parameters 500KW -15%~+10% Rated Current 6 AC 380V/400V/415V Voltage range Rated power EIPS-600/100 DC700V~DC900V( DC550V~DC900V with transformer) 3 Rated voltage AC grid-connected parameters EIPS-500/100 1200*1000*2000 600kg 650kg 1400*1000*2000 700kg 750kg Power Conversion System Model EIPS-50/50 EIPS-100/50 Voltage range Battery interface parameters WIPS Full load voltage range Max DC channel Qty 1 2 142A Output line 3W+N+PE/3W+PE Rated Current 50KW 100KW 75A 151A -15%~+10% 50Hz/60Hz Frequency range ±2Hz Power factor 1 Output harmonics ≤3% 100KW Rated voltage Others 250KW 303A 379A 200KW 250KW 303A 379A 3W+N+PE/3W+PE 50KW 150KW AC 380V/400V/415V Rated frequency Environment 200KW 150KW Voltage range Rated Current 5 227A Output line AC off-grid parameters 4 AC 380V/400V/415V Rated frequency Rated power EIPS-250/50 3 Single channel maximum current Rated power EIPS-200/50 DC350V~C900V Rated voltage AC grid-connected parameters EIPS-150/50 DC200V~DC900V 50Hz/60Hz 75A 151A 227A Voltage accuracy 1% Frequency accuracy ±0.2Hz Output voltage harmonics 3%@ linear full load Unbalanced load capacity 100% Overload capacity 105%:running time≥10min;120%:running time≥1min Working temperature -20℃~55℃(>45℃derating) Storage temperature -40℃~70℃(No battries) Relative humidity 0%RH~95%RH,No condensation Working altitude <45℃,2000m;2000m~4000m Derating Noise <75dB Comminication CAN/RS485 Isolation Transformer isolation optional Protection IP20 Cooling Air cooling, intelligent fan regulation Maximum efficiency 96.5%(no transformer) Dimension W*D*H Weight 600*800*2000 320kg 370kg 1200*800*2000 570kg 620kg 670kg GRES PCS+Battery Integrated System Ø IP54,safe and reliable operation in outdoor environment . Ø Highly integrated, plug and play. Ø Fixed on the ground or mounted on vehicle, ready to move. Ø No airconditioning design, high energy efficiency. Products GRES-75-50 GRES-150-100 GRES-225-100 GRES 50KW/75kWh GRES-300-200 Ecube 200KW/300kWh 100KW/150kWh GRES-600-400 400KW/600kWh 150KW/225kWh GRES-900-600 600KW/900kWh GRES System Model GRES-75-50 GRES-150-100 Rated output power (kW) 50 100 Max output power (kW) 55 110 GRES-225-150 GRES-300-200 GRES-600-400 GRES-900-600 Model GRES-75-50 GRES-150-100 150 200 400 600 Dimension(W*D*H)(mm) 1300*1540*1600 1300*2300*1600 165 220 440 660 Weight (kg) 1060 1780 AC parameters (grid connected) GRES-225-150 GRES-300-200 GRES-600-400 GRES-900-600 1300*3060*1600 2400*1540*2300 2400*2300*2300 2400*3060*2300 2470 3170 5300 7440 Basic Parameters Rated grid voltage (V) 3W+N+PE, 380 Isolated transformer NO Grid voltage range ±15% On/off grid switching STS Rated grid frequency (Hz) 50 Protection Outdoor IP55 Grid frequency range (Hz) ±2 Working temperature -20~55℃(>45℃derating) Relative humidity 0~95% ( (no condensing) Current waveform distortion rate <3%(Rated voltage) DC component <0.5%In Power factor >0.99(Rated voltage) Power factor adjustable range 1(lead)~1(lag) Overload capacity 110% Long term AC parameters (off grid) Rated output power (kW) 50 100 150 200 400 600 Max output power (kW) 55 110 165 220 440 660 Rated grid voltage (V) 3W+N+PE, 380 Current waveform distortion rate <3%(Linear Load) Rated frequency(Hz) 50 Overload capacity 110% Long term Cooling Intelligent air cooling (intelligent heating optional ) Max working altitude(m) 4000(>2000 derating) Display Touch screen Communication RS485、CAN、LAN Communication Protocol Modbus-RTU、Modbus-TCP、CAN2.0B Battery Battery type Lithium iron phosphate Energy of each module(kWh) 15.36 STS Module AC/DC Module Module qty 5 10 15 20 40 60 Total power (kWh) 76.8 153.6 230.4 307.2 614.4 921.6 Running Time (h) 1.5(Optional by Changing module qty) Cyclelife 25℃ 0.5C/0.5C 100%DOD EOL80% ≥2500次 System efficiency Max efficiency 95% Protection DC switch YES AC switch YES Grid monitoring YES Surge protection DC /AC 2nd level DC/DC (MPPT) Battery System Technology-Cell Lithium iron phosphate battery The Lithium Titanate battery Lithium iron phosphate batteries (LiFePO4 or LFP) offer lots of advantages compared to lead-acid batteries and other lithium batteries. Extended cycle life, zero maintenance, high safety, size and weight advantage, fast and efficient discharging and charging, just to name a few. LiFePO4 batteries are not the cheapest in the market, but due to a long life span and zero maintenance, it’s the best investment you can make over time. l High efficiency Lithium Titanate Oxide (lithium titanium oxide) batteries (LTO) are advanced modified lithium-ion battery that employs nano-technology in the form of lithium titanate nanocrystals instead of normal carbon material on its surface. The advantage of technical principle is that the anode has a surface area of about 100 square meters per gram of material - which certainly stands out as a lot more when compared with the 3 square meters per gram for normal carbon material.Though LTO batteries have a lower inherent voltage (2.4V/cell), which leads to a lower energy density than conventional lithium-ion battery technologies, it has absolute advantages in terms of long lifetime,high security and fast charging/discharging features, which make it be widely used in military, aerospace, electric vehicles, smart grid, communication base stations, hospitals, finance, telecommunications as well as system critical backup power systems. l Safty l Extremely Long Lifetime l High discharge rate l Rapid Battery Charging and Discharging l Extrme temperatures l Enhanced Safety l Longer cycle life l No maintenance l Size and weight advantages l Low-Temperature Performance Choose the most suitable cell for each application. Technology - Pack Ecube's cabinet structure is scientific, with high mechanical strength. Modular design makes installation and maintenance much convenient. And the overall structure ensures the reliability and safety of the system to the greatest extent, while achieving beautiful appearance. 2. Laser welding is used to wiring electrode, which is of high strength and low impedance. The lasler welding technology are much more reliable compared with the method of screw fixation which has the risk of screw loosening and would cause damage to the corresponding cell, and then affect the operation of the whole system. 1. Beside housing and safely protecting our cells, the whole module is designed and built to guarantee the highest safety of the system, in transportation, installation and operation. top cover bar plate fixing plate rear cover cell shell front panel base The cell itself is provided with PE insulation film, and a safe insulation gap is set between each cell; PC insulation support with high melting point and 2000V resistance is used for insulation and fixation for the cells; A space is reserved above the pressure relief valve to prevent excessive pressure explosion in case of abnormal conditions; All materials used meet the V0 - flame retardant grade; Plastic slots are exclusively designed for electrode and busbar to prevent electric leakage. 3. For fixed applications, JMD connectors are used between modules to save a lots of installation work for the customer and without the scattered power lines and communication lines, the whole appearance of the system is neat and beautiful. Technology - BMS BMS Three Level Management The company independently developed a new generation of high security and high reliability BMS battery management system for energy storage battery array, which has powerful functions such as voltage and temperature acquisition, thermal management, communication and alarm, data storage, etc. According to the characteristics of multilevel energy storage battery array system, the BMS system adopts distributed structure, which is composed of three-level management system: battery module management unit (BMU), battery cabinet management unit (BCU) and battery cabinet array management unit (BAU). The system supports the fine management of multiple cells, and can sample, analyze and manage each battery cell. Battery SOC、SOH monitoring Battery equalization management Communication management BMS Function Battery parrameter monitoring Battery safety management BMU BCU BAU Bidirectional active balancing l Energy transfer active balancing; l The balancing accuracy is less than 2%, and the balancing capacity reaches 10% of the rated output; l The change of single core capacity does not affect the system capacity Function Battery module management unit Battery string management unit Battery array management unit Heavy current control system Others Display Current sensor Manage energy storage battery modules and support voltage acquisition of 16 circuits at most Control BMU and manage battery clusters Control BCU and manage the entire battery array Supervise main connector at the battery string, collect current at the battery string and detect insulation leakage status Display battery information and alarm; set and change partial critical parameters Detect battery pack charge/discharge loop current Technology - EMS EMS energy management system provides integrated control and monitoring functions for the whole scheme, collects and analyzes the real-time data of each equipment in the whole project, and monitors the key data parameters in real time. It is composed of server, human-machine interface, controller, measurement unit, sensor and cloud platform. According to its application type, it can realize the functions of equipment information collection, control, data summary, chart analysis and so on through the energy management system, and forms a set of scientific and energy-saving energy distribution scheme according to the step electricity price, time period, battery BMS data, load rate, etc. Other facilities Voltage, current, power, etc. Status of transformers and circuit breakers Protection relay events Interface with upper system Dynamic environment monitoring Communication Remote control Local control Cloud control All kinds of field devices send data to the cloud platform through the gateway. Users can remotely monitor and manage the equipment through the browser and app. The field can also use the configuration software for local monitoring. Alarm Alarm and event summary Provide audio and visual alarm to operators Main Functions Data statistics Statistics of battery capacity and energy consumption in different periods Real time and historical simulation data trends SCADA Provide various SCADA functions required for ESS operation. PCS PCS operation mode Analog and measured data such as voltage, current, frequency, AC and DC active power and reactive power Cooling system status (internal temperature, on / off) Events of protection function Battery Analog and measured data of voltage, current, power, SOC, SOH and temperature of each rack and module BMS communication status Control strategy With the real-time collection and control of distributed generation, energy storage and load operation data, by setting control parameters, the whole system can be automatically controlled and unattended. In addition, the operation efficiency and economic benefit of microgrid system can be improved by optimizing the control strategy. DBMS Database management system Archive and retrieve databases Independent report Convenient report editor Technology - PCS With more than 10 years of expertise in energy storage PCS, Ecube has developed a series of PCS products which allows energy to be stored or accessed exactly when it is required to provide seamless system integration and battery control. Feature Ecube’s PCS adopts advanced digital control technology, optimizes the control performance, improves the reliability of the system, and realizes the uninterrupted switching between on-grid discharge, on-grid charging and off-grid operation. Our PCS system has a wide DC input range, which can better meet the charge and discharge requirements of different battery combinations. At the same time, PCS system adopts modular design in structure and power, which increases the diversity of battery connection and reduces the number of parallel battery groups under the same power output. It can better manage the battery, improve the battery life and the economic benefits of the energy storage system. Multi Energy access Support the access of power grid,fuel generator, battery, solar energy, wind energy and other kinds of energy; Multi energy complementation, higher system utilization Ecube PCS consists of four parts: bidirectional AC / DC converter, bidirectional DC / DC converter, parallel off-line static transfer switch STS and monitoring unit PMS. Each module can be configured selectively according to the demand, and different units can be combined into different capacity specifications and application modes Bidirectional AC / DC converter On-grid system Bidirectional DC / AC module + on and off grid STS On and off-grid system Bidirectional DC / DC module + bidirectional DC / AC module Wide range on-grid system Bidirectional DC / DC module + bidirectional DC / AC module + On and off grid STS Wide range on and off-grid system Modular design Flexible structure and on-demand configuration Fast expansion and convenient maintenance High Reliability MPCS, for distributed grid energy storage In case of power failure, can be used as On-line UPS Isolated hot and cold duct, High reliability 20-year design lifetime Excellent performance The switching time between on and off grid is less than 10ms, which can guarantee the uninterrupted power supply of key load Support parallel operation Easy operation&High availability Local status display screen Remote real-time monitoring and diagnosis References Hebei Ecube New Energy Technology Co.,Ltd No5, Haihe Road,Gaoxin District,Shijiazhuang,China stella@ecube.net.cn www.ecubeess.com +86 15081159220