TECH 100905 CORD DF SBR 1.6 mm Base fabric : Coating : Polyaramide Ext :NR/SBR rubber Int :NR/SBR rubber un cured V100905-A Status : Item code : The characteristics described below are obtained with optimal vulcanization conditions under press. Specifications Standard-Test Surfacic Mass indicative value Result (Imperial) Result (Metric) ISO 2286-2 50.3 oz/yd² ± 5.9 1705 g/m² ± 200 Thickness ISO 2286-3 0.063 in ± 0.006 1.6 mm ± 0.15 Tensile Strength ISO 1421 CH (W) >= 7303 lbs/in >= 6500 daN/5cm TR (F) NA Elongation at break ISO 1421 CH (W) >= 2.5 % TR (F) NA Peeling Test Adhesion ISO 2411 Usable width : 140 cm ± 10 cm – 55 inch ± 4 inch Rubberized Colors : Black Direction CH (W) >= 33.7 lbs/in >= 30 daN/5cm Revision n°1 updated 12/03/2019 The information supplied herein is based upon data currently available. Suggested applications are purely indicative and do not imply any warranty on serviceability. The client should always proceed with its testing and validation. Pennel & Flipo makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. There are no warranties, either expressed or implied, including the warranty for fitness or merchantability, unless expressly set forth herein. DOC.COM/5/B – 15/04/09 www.orca.eu Boulevard de l’Eurozone, 102 7700 Mouscron BELGIUM SA au capital de 1 000 000 € Phone : +32(0)56 392100 Fax : +32(0)56 392101 Mail : info@orca.eu VAT N° : BE 0 885 940 788