AAU5639w
Description
Issue
01
Date
2020-05-26
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2020. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
https://www.huawei.com
Email:
support@huawei.com
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
i
AAU5639w
Description
Foreword
Foreword
Exterior
Document Version
Product Name
Solution Version
Product Version
AAU5639w

SRAN15.1 and later
V100R015C10 and later

5G RAN2.1 and later
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
ii
AAU5639w
Description
Contents
Contents
Foreword ........................................................................................................................................... ii
1 Overview......................................................................................................................................... 1
2 Product Characteristics................................................................................................................. 3
3 System Architecture ...................................................................................................................... 4
3.1 Exterior ......................................................................................................................................................................... 4
3.2 Physical Ports ............................................................................................................................................................... 5
4 Technical Specifications .............................................................................................................. 6
4.1 Frequency Band ............................................................................................................................................................ 6
4.2 Antenna Electrical Specifications ................................................................................................................................. 7
4.3 Mechanical Downtilt Supporting Arm .......................................................................................................................... 7
4.4 Capacity ........................................................................................................................................................................ 7
4.5 eCPRI Port Specifications ............................................................................................................................................ 7
4.6 Output Power ................................................................................................................................................................ 8
4.7 Static Sensitivity ........................................................................................................................................................... 8
4.8 Power Consumption...................................................................................................................................................... 8
4.9 Power Supply ................................................................................................................................................................ 9
4.10 Physical Specifications ............................................................................................................................................... 9
4.11 Standards..................................................................................................................................................................... 9
4.12 Environmental Specifications ..................................................................................................................................... 9
5 Acronyms and Abbreviations ................................................................................................... 11
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
iii
AAU5639w
Description
1 Overview
1
Overview
The active antenna unit (AAU) is a new type of RF module following the RFU and RRU. It
incorporates the functions of RRUs and conventional antennas and requires less site
resources.
Figure 1-1 Evolution of Huawei base stations
The AAU5639w is one of Huawei's main products that implement massive MIMO in 5G NR
networks. The following figures show the position of the AAU5639w in 5G NR TDD
network.
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
1
AAU5639w
Description
1 Overview
Figure 1-2 Position of the AAU5639w in the 5G NR network
The AAU5639w supports 64T64R. Through sharp increase of transmit and receive antenna
channels, this product provides greater diversity, array, spatial multiplexing, and interference
suppression gains. This helps operators to maximize the use of existing site and spectrum
resources, enhance the system performance, and improve wireless network capacity.
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
2
AAU5639w
Description
2 Product Characteristics
2
Product Characteristics
Leading Performance

Multiple channels
The AAU5639w uses the massive MIMO technology and supports 64T64R. Massive
MIMO features the adoption of massive antenna arrays for joint signal reception and
demodulation or transmission, and therefore significantly enhances single-user link
performance and multi-user spatial multiplexing capability, and improves system link
quality and transmission rates when compared with traditional multiple-antenna
technologies. Massive MIMO also enables the system to flexibly adjust beam forms in
both the horizontal and vertical planes, significantly enhancing 3D coverage capability.

Large bandwidth
The AAU5639w supports a large bandwidth of 200 MHz and C-band deployment. The
AAU5639w can work in the C-band. The C-band is a mainstream frequency band and
has abundant spectrum resources. The AAU5639w has a bandwidth capability of 200
MHz and supports diverse operators' C-Band spectrum resources. Only one such module
can be used to complete the C-band deployment, saving site space and reducing network
construction costs.

High power
The AAU5639w adopts the industry-leading power amplification technology, Huaweideveloped IF and RF chip, and unique antenna element technology. The module features
high power, large bandwidth, and small size. The advanced power amplification
technology achieves a maximum of 240 W power and supports a wider coverage area.
High Integration

Light weight and small size
The AAU5639w integrates the functions of antennas and RF modules with a total weight
of 32 kg and a small size (730 mm x 395 mm x 190 mm). Its weight and dimensions are
far less than those of the traditional RRU+antenna solution.

Small frontal area
The frontal area (730 mm x 395 mm) of the AAU5639w is smaller than that of a
common antenna.

Flexible deployment
The integrated design of the AAU5639w saves the installation space required by the
RRU, jumper, and external combiner. This simplifies the antenna installation platform
and enables flexible deployment. Its support for 3D beamforming and tilt adjustment
reduces requirements on the antenna height and facilitates installation.
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
3
AAU5639w
Description
3 System Architecture
3
System Architecture
3.1 Exterior
3.2 Physical Ports
3.1 Exterior
Figure 3-1 shows the AAU5639w exterior.
Figure 3-1 AAU5639w exterior
(1) Mounting kits: upper
handle
Issue 01 (2020-05-26)
(2) Mounting kits: lower
handle
Copyright © Huawei Technologies Co., Ltd.
(3) Anti-falling safety
reinforcement hole
4
AAU5639w
Description
3 System Architecture
3.2 Physical Ports
Figure 3-2 describes the physical ports on an AAU.
Figure 3-2 AAU5639w physical ports
Table 3-1 Ports on an AAU
Silkscreen
Connector
Quantity
Description
CPRI0
SFP
1
Connects to a BBU.
Maximum rate: 25
Gbit/s
CPRI1
SFP
1
Connects to a BBU.
Maximum rate: 25
Gbit/s
PWR
Outdoor quick
connector
1
Power input port
Aux
DB15
1
Connects to an
external AISU and
RGPS module.
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
5
AAU5639w
Description
4 Technical Specifications
4
Technical Specifications
4.1 Frequency Band
4.2 Antenna Electrical Specifications
4.3 Mechanical Downtilt Supporting Arm
4.4 Capacity
4.5 eCPRI Port Specifications
4.6 Output Power
4.7 Static Sensitivity
4.8 Power Consumption
4.9 Power Supply
4.10 Physical Specifications
4.11 Standards
4.12 Environmental Specifications
4.1 Frequency Band
Table 4-1 AAU5639w NR TDD frequency bands
Frequency
Band
Frequency
Range
NR TDD
Carrier
Bandwidth
IBW
OBW
N78
3410 MHz to
3610 MHz
20 MHz, 30
MHz, 40 MHz,
50 MHz, 60
MHz, 70 MHz,
80 MHz, 90
MHz or 100
MHz
200 MHz
200 MHz
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
6
AAU5639w
Description
4 Technical Specifications
4.2 Antenna Electrical Specifications
Table 4-2 Antenna electrical specifications of the AAU5639w NR TDD
Item
NR TDD Specifications
Frequency band
3410 MHz to 3610 MHz
Polarization mode
+45° and –45°
Gain (dBi)
25
Horizontal scanning range of
broadcast beams
–60° to +60°
Vertical scanning range of broadcast
beams
–15° to +15°
Number of antenna elements
192
4.3 Mechanical Downtilt Supporting Arm
The adjustment range of the mechanical downtilt supporting arm is –20° to +20°.
4.4 Capacity
Table 4-3 AAU5639w NR TDD capacity
Frequency Band
TX/RX Channel
NR TDD Capacity
3500 MHz
64T64R
A maximum of two carriers
are supported.
4.5 eCPRI Port Specifications
Table 4-4 eCPRI port specifications
Item
Specifications
Number of eCPRI ports
2
eCPRI port rate (Gbit/s)
10/25
eCPRI networking
Load sharing topology, star topology are supported.
Maximum distance from the

Issue 01 (2020-05-26)
When 25 Gbit/s optical modules are used, the maximum
Copyright © Huawei Technologies Co., Ltd.
7
AAU5639w
Description
4 Technical Specifications
Item
Specifications
BBU
length of fiber optic cables between the BBU and AAU
must be less than 10 km.

When 10 Gbit/s optical modules are used, the maximum
length of fiber optic cables between the BBU and AAU
must be less than 20 km.
4.6 Output Power
Output Power
Table 4-5 AAU5639w output power
Frequency Band
Total NR TDD Power
3500 MHz
240W
4.7 Static Sensitivity
Table 4-6 Static sensitivity of the AAU5639w NR TDD
Frequency Band
Typical NR TDD Static Sensitivity
3500 MHz
–99 dBm for 1 RX
When the ambient temperature of the NR TDD static sensitivity is 25°C, the test configuration should
comply with 3GPP TS 38.141 (QPSK, R=1/3, 51 RBs).
4.8 Power Consumption
Table 4-7 AAU5639w power consumption
Frequency Band
Typical Power Consumption
3500 MHz
740 W
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
8
AAU5639w
Description
4 Technical Specifications
The typical power consumption refers to the power consumption when the ambient temperature is 25°C
and the traffic load reaches 50%. The actual typical power consumption has a 10% deviation from this
value.
4.9 Power Supply
Table 4-8 Power supply
Item
Specifications
Input power
-48 V DC (voltage range: -36 V DC to -63 V
DC)
4.10 Physical Specifications
Table 4-9 Physical specifications of the AAU5639w
Item
Specifications
Dimensions (H x W x D)
730 mm x 395 mm x 190 mm
Weight
32 kg (not including mounting kits)
4.11 Standards
Table 4-10 Standards
Item
Specifications
RF
3GPP TS38.104
ECC
4.12 Environmental Specifications
Table 4-11 Environmental specifications
Item
Specifications
Operatin
–40°C to +55°C (without solar radiation)
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
9
AAU5639w
Description
4 Technical Specifications
Item
Specifications
g
temperat
ure
Operatin
g wind
speed
150 km/h
Rated
wind
velocity
200 km/h
Wind
load

Front: 435 N (Assume that the wind speed is 150 km/h.)

Side: 170 N (Assume that the wind speed is 150 km/h.)
Relative
humidity
5% RH to 100% RH
Atmosph
eric
pressure
70 kPa to 106 kPa
Operatin
g
environm
ent
ETSI300019-1-4 V2.2.1(2014-04) Class 4.1: "Non-weatherprotected locations"
Antiseismic
protectio
n

YD5083-1999: Interim Provisions for Test of Anti-seismic Performances of
Telecommunications Equipment (telecom industry standard in People's
Republic of China)

ETSI300019-2-3(V2.4.1 2015-12)

GR63-CORE, Issue 4, April 2012 Zone4
Ingress
protectio
n (IP)
rating
IP65
Surge
protectio
n

IEC 62305-1 Protection against lightning - Part 1: General principles

IEC 62305-3 Protection against lightning - Part 3: Physical damage to
structures and life hazard

IEC 62305-4 Protection against lightning - Part 4: Electrical and electronic
systems within structures

ITU-T K.35 Bonding configurations and earthing at remote electronic sites

ITU-T K.56 Protection of radio base stations against lightning discharges

ITU-T K.97 Lightning protection of distributed base stations

ETSI EN 300 253 Environmental Engineering(EE): Earthing and bonding
configuration inside telecommunications centers

YD 2324-2011: Lightning protection requirements and test methods for
radio base stations

GB/T 50689-2011: Code for design of lightning protection and earthing
engineering for telecommunication bureaus (stations)
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
10
AAU5639w
Description
5 Acronyms and Abbreviations
5
Acronyms and Abbreviations
Table 5-1 Acronyms and abbreviations
Acronym or Abbreviation
Full Name
AAU
Active Antenna Unit
BBU
Baseband unit
eCPRI
Enhanced Common Public Radio Interface
EPC
Evolved Packet Core
IBW
Instantaneous Bandwidth
OBW
Occupied Bandwidth
NR
New Radio
3GPP
3rd Generation Partnership Project
Issue 01 (2020-05-26)
Copyright © Huawei Technologies Co., Ltd.
11