3
E .series
Beginner Basics
Training Manual
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
Disclaimer
COPYRIGHT NOTICE
© 2020 Zuken USA Inc. All rights reserved.
No part of this manual may be reproduced, displayed, modified, translated, distributed or transmitted in any form or for any purpose
without the express prior written permission of Zuken USA Inc. This manual is for your personal use in connection with your company’s
business purposes related to the software. Any commercial use of this manual, including without limitation, sale, license, rental or lease
is prohibited.
TRADEMARK NOTICE
This manual includes registered trademarks and trademarks.
E³.series® is a registered trademark of Zuken E3 GmbH in the USA and other countries.
NETWORK.
Zuken® is a registered trademark of Zuken Inc. and its affiliated companies in the USA and other countries.
All other company and
product names contained in this manual are trademarks or registered trademarks of their respective owners.
LEARN.
INNOVATE.
DISCLAIMER
This manual has been prepared with the greatest care. However, Zuken USA Inc. shall not be held liable for any improper or incorrect
use of this manual or information described and/or contained in this manual and assumes no responsibility for your use of this manual
or your operation of the software by using this manual. Neither Zuken USA Inc. nor its affiliated companies shall be liable in contract,
tort or otherwise for any loss, damage, injury, cost or expenses, including without limitation direct, indirect incidental, special or
consequential damages, arising out of your use of this manual or your operation of the software by using this manual.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics Training
Introduction
▪ Welcome to the E³.series Beginner Basics Training class.
▪ This course covers the basic use of E³.series.
▪ This course material was created for E³.series 2019
▪ In this class, you will learn:
– Overview basics of E³.series Schematic & Cable
– User Interface and Command Elements
– Creating projects
NETWORK.
– Creating sheets
LEARN.
– Placement aids
INNOVATE.
– BOM generation
and other reports
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics Training
Table of Contents
▪ Overview of E³.series Modules
▪ Sheet
– Product Description
– Inserting a New Sheet
– Object Oriented Architecture
– Opening, Closing & Deleting Sheets
– Integration
– Renaming Sheets, Exchanging Sheet Formats, Adding Sheet Texts
– E3.series Modular Structure
– Arranging Sheet Windows
– Terminology Used in E³.series
▪ User Interface and Command Elements
▪ Launching E3.series
– Windows Application features
– Different E3.series programs
– Project Window
– Starting Several E3.series Instances
– Database Window
– Project OverviewLEARN.
– Preview Window
NETWORK.
▪
Project
– Output Window
INNOVATE.
– Creating Projects
• Messages
– Opening Existing Projects
• Results
– Closing Projects
– Main Menu
– Saving Projects
• Saving a Project under a New Name
– Status Bar
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics Training
Table of Contents
▪ User Interface and Command Elements (cont.)
– Customizing User Interface
– Symbols Explained
• Hide Windows and Tables Automatically “Auto Hide”
– Component/Device Explained
• Define and Reset Toolbars
– Item Designation
• Keyboard Inputs
• Settings Affecting Higher Level Assignment and Location.
‒ Predefined Shortcut Keys in E³.series
– Mouse Buttons
– Object-Oriented Context Menus
NETWORK.
▪ Placement Aids
–
▪ Components and Symbols
Zoom Functions LEARN.
– Panning
– Grids
INNOVATE.
▪ Searching and Loading Components/Symbols from the Database
▪ Levels
▪ Free Graphics and Texts
▪ Generating Data
– Reports Sheet/EXCEL/ASCII/ACCESS
– Export / Import
– Printing
– Crosshairs
– Rulers
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
System Prerequisites
▪ Operating Systems
▪ Minimum System Prerequisites
– Windows 7, Windows 8, and Windows 10
▪
Software Prerequisites
– E³.series is available in two versions: 32-bit and 64-bit.
• The 32-bit version runs on 64-bit operating systems in (WOW) mode.
• If using Microsoft Office 2010 32-bit, you must install the 32-bit
version of E3.
– The installation requires administrative privileges for Windows. Please log
on as an administrator to the Windows system.
– Specific company IT policies may prevent write access to the following
folders. If you NETWORK.
need to have write access, you must contact your IT
department or move the data to an unprotected folder.
LEARN.
• C:\Program Files
• C:\Program Files (x86)
INNOVATE.
• C:\ProgramData
– 2 GHz CPU or higher
– Minimum 1 GB main memory recommended for Vista / Windows 7
operating systems or 2 GB main memory for larger projects (schematics
with more than 200 pages)
– 19" monitor with 1280x1024 for True Color or Wide Screen Monitor;
– alternative Dual Screen Solution
– 3-button mouse with scroll wheel
– At least 10 GB free storage space on the hard drive (for normal
installations).
– No special requirements regarding graphic cards
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Product Description
▪ E³.series is a modular CAD system for electrical engineering, creating schematics and cable harnesses as
well as for pneumatic and hydraulic design.
▪ The user is supported throughout the entire design process, from development to production.
▪ E³.series is a modern system: completely Windows®-based thereby making it easy to learn and use.
▪ E³.series uses the latest technology.
▪ More than 1700 customers worldwide attest to the success of E³.series.
NETWORK.
▪ A safe investment
in your E-CAD future!
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Product Description
▪ Object-Oriented Architecture
– E3.series is based on an object-oriented data structure, in which all modules reference a single data structure.
– No data transfer takes place between the various modules.
– Objects are displayed correctly in all modules using special views.
– With its continuous data management system errors are avoided and document quality increased.
▪ Integration
– The bidirectional API permits direct access to the object-oriented data.
NETWORK.
– E3.series connects
powerful logic functions with the security of online checks throughout the entire system.
– Integrated interfaces
LEARN.make it possible to:
‒ Import and export DXF/DWG, TIFF, GIF, JPG, PDF, DGN, CGM, VRML and STEP AP-214 data.
INNOVATE.
– E³.series accepts data from other ECAD systems and is easy to integrate into your existing design environment with
PDM, ERP or 3D M-CAD systems.
▪ Multi-User
– The multi-user option of E³.series Enterprise Edition makes simultaneous engineering possible and significantly reducing
project lead times.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Overview of E³.series Modules
▪ E³.series software consists of several, different modules.
▪ E³.series modules are used to design, create, modify and check the electrical, electronic, hydraulic and
pneumatic design and associated documentation.
▪ All modules work with the same data kernel, which allows data and information to be shared between
modules.
▪ In E³.series the symbol and component databases form the foundation, on which everything else is based.
▪ Areas of Use:
NETWORK.
– Plant and Machinery
– Technology
– Applications LEARN.
– Hardware Manufacturing
– AutomotiveINNOVATE.
Industry
– Measurement and Precision
– Power Supply Industry
– Technology
– Aerospace
– Basic Research
– Electronic Design
– … and much more
– Telecommunications and Switching
– Technology
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Overview of E³.series Modules
No
Module
Short Description
1
E³.schematic
Schematic editor for developing electrical, hydraulic and pneumatic circuit diagram documentation
2
E³.cable
For wiring and cabling of electrical and electronic components
3
E³.formboard
Used to create 1:1 working templates for cable harness production
4
E³.topology
Distribute components and generate Harnesses automatically
5
E³.panel
Panel layout editor for generating panel layouts and wiring the controls, also in 3D display
E³.view
NETWORK.
6
E³.viewplus
LEARN.
Free-of-charge module for viewing E³.series documents and schematics
Offers additional possibilities regarding level manipulations, switching languages and executing scripts.
7
E³.redlinerINNOVATE. For documenting changes during commissioning and production phases
8
E³.enterprise
Multi-user functionality enabling more than one user to work in parallel on an E3 project. E3 projects are stored in a SQL or
ORACLE database.
9
E³.logic
Used for designing and documenting the electronic circuits used in the creation of Printed Circuit Boards
10
Cadstar
Circuit board routing and documentation
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
E³.series Modular Structure
E³.series
Flow Chart
Scripting Interface (COM)
E³.
E³.cable
E³.logic
E³.view(plus)
E³.redliner
E³.panel
Cadstar
NETWORK.
Database Editor
LEARN.
INNOVATE.
ADO Interface
Database
A
Database
B
Database
C
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Terminology Used in E3.series
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
Project
– Defines a drawing set in E3.series, which consists of one or more sheets as well as external documents
Object-Oriented
– E3.series manages objects, such as components, symbols, connectors, blocks, connections, graphics and text.
– An object is used only once in a project and can be displayed in different views.
View
– Different displays (views) of an object, e.g. terminals in the schematic and in the terminal plan
Sheet
– Drawing area, on which symbols, texts and graphics are placed
Component
– A physically existing device
Symbol
– Abstract, graphical display of a component or part thereof
Device
– A component used in a circuit that is assigned a device designation.
Attribute
– Additional information assigned to an object
Dialog
– Menu window, in which data can be input and processed by E3.series
Sub-Circuit (Part)
– Sub-Circuits may contain devices, symbols and connections. A Sub-Circuit pointer can be saved in the database.
Model
– The model is a panel symbol and represents the device on a panel sheet.
Schematic Type
– When placing a symbol, the system checks to see whether the schematic type agrees with that of the sheet - only then is it possible to be placed.
Attribute Text Template Symbol
– Used to display cable, conductor, wire, project, device and/or connection attributes.
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Launching E3.series
▪ From the Windows Start Menu
– If a Full Installation was performed, ALL E3 module
shortcuts will appear.
– Your company’s license determines what features are
activated.
▪ From shortcuts the user or administrator may place
on your desktop of Windows Toolbar.
NETWORK.
▪ If you receive
a licensing error, please contact your
IT administrator.
LEARN.
INNOVATE.
NOTE: This training is executed using a temporary
license file. Some demonstrated features MAY
NOT function once this license expires
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Starting Several E3.series Instances
▪ Several projects can be opened simultaneously
– A new program window (instance) of E3.series is created for every project.
▪ All projects opened in the single-user version of E³.series cannot be opened by another user
– If another user tries calling up an already opened project, a window appears stating “WHO” opened the project and
“WHEN”
▪ Only one license per workstation is used, independent of how many E³ instances have been started.
NETWORK.
LEARN.
INNOVATE.
Go To Agenda
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
User Interface and Command Elements
▪ E3.series is a pure Windows application making it easy to learn and use
– Everything you know from other Windows programs can be used in E³.series.
‒ Drag & Drop
‒ Pick & Place
‒ Cut, Copy & Paste
‒ OLE
‒ and don’t forget Undo/Redo
NETWORK.
LEARN.
INNOVATE.
Go To Agenda
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
User Interface and Command Elements
▪ After starting and opening a project in E³.series, the user interface is arranged as follows
– Project Pane
‒ Displays all of the project's sheets and devices in a tree structure
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Project Window Panes
Project Pane - Sheet
Project Pane - Devices
Project Name
Folder Name
NETWORK.
Symbol Name
LEARN.
INNOVATE.
Sheet Name
Device Name
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Project Window
▪ The project’s hierarchical design is displayed in the form of a tree structure in the Project Window
▪ These trees can be individually configured
▪ Object classes are displayed by tabs, i.e. Sheet (sheets and OLE documents), Devices, and Panel (Panel tab
only available if corresponding license exists). Additional tabs may be created showing only placed or
unplaced objects.
▪ For more information regarding this topic, see the chapter “Tree Control Properties”.
NETWORK.
LEARN.
INNOVATE.
Hotkeys
Function
Ctrl+F4
Closes the current window
Ctrl+F6
Ctrl+<Tab>
Switches to the next opened window
Page Up
Goes to the previous sheet in the project structure
Page Down
Goes to the next sheet in the project structure
Home
Opens the first sheet in the project structure
End
Opens the last sheet in the project structure
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Project Window
▪ Tree Control Properties - General Tab
– Right-click anywhere in the Project Window Tree
– Select Tree Control Properties...
1
2
Number
1
Description
NETWORK.
The translations are defined here that are used for the
corresponding interface language in the Tree Control
Properties.
3
LEARN.
Defines which objects shall be displayed in the tab.
For symbols and models one can also decide whether:
•
All symbols/models
•
only Unplaced symbols/models
•
or only Placed symbols/models shall be displayed.
INNOVATE.
2
3
For every object type an individual Info Column can be
configured using the attributes listed.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Project Window
▪ Tree Control Properties - Sorting Tab
– Right-click anywhere in the Project Window Tree
– Select Tree Control Properties...
1
Number
1
Description
Determines which structure nodes of the given structure template file
(Structure_template.xml) shall be displayed in the Project Tree Control
Properties.
2
NETWORK.
LEARN.
2
Up to 5 sorting criteria can be defined. All attributes with the corresponding
owner of the tree objects are offered in the drop-down list, which can then
be displayed in ascending or descending order in the tree. Each sorting
criteria generates a structure folder in the tree view.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Project Window
▪ Main Window
– The Main Window displays the entire
workspace in E3.series.
– All sheet windows are displayed and edited
here.
– The project’s sheets and documents are edited
in the sheet window(s).
– The Sheet Window, like other Windows
NETWORK.
applications,
can be changed in the title bar.
LEARN.
Minimize
Maximize
INNOVATE.
Minimized
Sheet
Close
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
User Interface and Command Elements
▪ After starting and opening a project in E³.series, the user interface is arranged as follows
– Main Window Pane
‒ Displays the project’s drawing sheets and other documents.
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Database Window
▪ All components and symbols of the active database are displayed in the form of a tree structure
▪ The sorting takes place in the <default> structure based on the attribute Class
– Can be changed by modifying the Tree Structure
Search
Filter
Components
Folders
NETWORK.
Symbols
LEARN.
Database
INNOVATE.
Tabs
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Database Window
▪ The E3 database structure can be flexibly defined
▪ Some established structures are already pre-defined
▪ Right-click on the name of the defined database and select the command Tree Structure in the displayed
context menu.
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
User Interface and Command Elements
▪ After starting and opening a project in E³.series, the user interface is arranged as follows
– Output Pane
‒ Displays all messages and results.
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Output Window
▪ All program information is displayed in the Output Window.
– The Output Window is divided into two tabs.
‒ Messages - General messages
‒ Results - Results of search or list functions
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
User Interface and Command Elements
▪ After starting and opening a project in E³.series, the user interface is arranged as follows
– Preview Pane
‒ Allows sheets, components, and symbols to be viewed graphically
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Preview Window
▪ The object currently active is displayed in the Preview Window.
▪ This can be:
– Sheet Contents or Zoomed Area
– Schematic Symbol
– Panel symbol
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Status Bar
▪ The most important settings and information are displayed in the Status Bar.
▪ This includes
– Results of operations (i.e. Cross-section not in limits)
– Component descriptions
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Main Menu
▪ The Main Menu contains all commands which are available in E3.series.
▪ The commands are merged into groups and displayed as Pull Down menus.
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Define and Reset Toolbars
▪ Entire toolbars can be displayed or hidden by:
– The Main Menu → Tools → Customize → Toolbars
tab
• Checking or unchecking the check box
OR
•
Context Menu in any open area occupied by
toolbars
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Define and Reset Toolbars
▪ Click Reset to undo modifications to the selected
toolbar and return it to the state as saved in the
Workspace Configuration
▪ Click Reset All performs the previous action for all
existing toolbars
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Keyboard Inputs
▪ Keyboard inputs take place using hotkeys as well
as directly through the main menu.
▪ The main menu is activated using the ALT key.
– The cursor keys can be used in the menu to navigate.
▪ If a hotkey is available for a command, it is
displayed in the drop-down menu after the
command.
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Predefined Shortcut Keys in E3.series
Menu
File
File
File
File
File
File
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Edit
Command
Shortcut
New
Open
Save
Save as
Print
Exit
CTRL+N
CTRL+O
CTRL+S
F12
CTRL+P
Alt+F4
Undo
Redo
Cut
Copy
Duplicate
NETWORK.
Paste
Paste extended
LEARN.
Delete
Move (Rotate)
INNOVATE.
Move along horizontal axis (subsequent command to 'Move (Rotate)')
Move along vertical axis (subsequent command to 'Move (Rotate)')
Move (sub)objects with locked position
(valid for texts and models)
Change Signal on selected pins
Select all
Search
Reset Highlight
CTRL+Z / ALT+BACK
CTRL+Y
CTRL+X / SHIFT+DEL
CTRL+C / Ctrl+INS
CTRL+D
CTRL+V / SHIFT+INS
CTRL+SHIFT+V
DEL
CTRL+M
H (keep pressed and move mouse)
V (keep pressed and move mouse)
F
CTRL+W
CTRL+A
F3
SHIFT+F3
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Predefined Shortcut Keys in E3.series
Menu
View
View
View
View
View
View
View
View
Insert
Insert
Insert
Insert
Insert
Tools
Command
Zoom
Adjust Zoom
Fit to Window
Levels
Project Window
Database Window
Output Window
Refresh
NETWORK.
Shortcut
Z
J
O
L
ALT+0 (zero)
ALT+2
ALT+1
F5
Last symbol
Dimension
LEARN.
Text
Connection
INNOVATE.
Curve connection
D
M
T
C
B
Settings
S
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Predefined Shortcut Keys in E3.series
Menu
Misc
Misc
Misc
Misc
Misc
Misc
Misc
Misc
Misc
Misc
Misc
Misc
Misc
Misc
Command
Display all conductor/wire logic lines of signal
Reset display all conductor/wire logic lines of signal
Place at original position
Coordinate Input
Reconnect Conductors
Rotate
Activate / deactivate snap move mode
Mirror X
Mirror Y
Jump
NETWORK.
Jump to tree in Device tree
Help
LEARN.
Open/Close full screen mode
Rename
INNOVATE.
Shortcut
F6
SHIFT+F6
SHIFT + O
P
Q
R
W
X
Y
CTRL+J
CTRL + left mouse click on desired device
F1 / SHIFT+?
F11
F2
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Hide Windows and Tables Automatically “Auto Hide”
▪ All Windows (e.g. Output, Preview, Database or Project Window
▪ Tables (e.g. Device, Pin, Connections or Sheet Table)
– Can be automatically hidden (in the background) and redisplayed by clicking on the “Auto Hide” button in the desired
window.
– The hidden windows or tables are displayed in the side margin and become visible after moving the cursor over the tab.
NETWORK.
LEARN.
INNOVATE.
Unpinned
(Auto Hide)
Pinned
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Customizing the User Interface
▪ Toolbars, tables and windows can be moved, freely placed, anchored, or resized
▪ If a table or window needs to be docked, simply drag it onto the desired docking tab
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Mouse Buttons
▪
The main input device for E³.series is the mouse.
– E³.series supports the use of a 3-button mouse.
– To select a command, move the cursor over the desired object or the desired menu item and click the left mouse button.
– The individual mouse buttons are assigned different functions
– Standard Mouse Button Functionality:
‒ Left Mouse Button
‒ Select
‒ With a short click individual objects are selected (marked) or deselected.
‒ While pressing and holding the SHIFT key, the left mouse button can be used to select several individual objects.
‒ Move
‒ Press and hold the left mouse button on an object to mark the object and then it can be moved.
‒ Middle Mouse Button
NETWORK.
‒ Zoom
‒ With
the middle mouse button (scroll wheel) drag a rectangle over the area so that the area is enlarged.
LEARN.
‒ While pressing the Ctrl key and moving the scroll wheel back and forth the area can be dynamically enlarged or reduced
‒ Right Mouse
Button
INNOVATE.
‒ Context menu of selected object
‒ Using the right mouse button on a selected object calls up the corresponding context menu.
‒ Context menus also appear in the Project and Database Windows.
‒ Mouse Strokes
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Object-Oriented Context Menus
▪ For every object in E³.series a context menu is available.
– These context menus are called up using the right mouse button.
– The context menus contain the most important commands for modifying the respective
object.
– The properties of selected objects can be changed in the lower section of the context
menu.
– The contents of the context menus are dynamically structured depending on the selected
object.
NETWORK.
▪ Available context menus:
LEARN.
– Sheet
INNOVATE.
– Symbol / Device
– Connection
– Pin Text
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Placement Aids
▪ Zoom In Functions
Z
– Shortcut Z
• After pressing the hotkey “Z”, a rectangle appears
at the cursor position, drag the cursor to define the
area to be zoomed and left-click. The starting
vertices is the position of the mouse when the
command is entered.
– The following method allow the user to define the start
NETWORK.
and stop vertices
of the zoom.
• Main Menu
→ View → Zoom
LEARN.
• Sheet Context Menu
INNOVATE.
• Display Toolbar
– Mouse Wheel
– Mouse Strokes
• Click and hold right mouse button
• Draw the letter Z over the desired zoom area
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Placement Aids
▪ Zoom Out Functions
O
– Shortcut O
– Main Menu → View → Zoom
– Sheet Context Menu
– Display Toolbar
NETWORK.
– Double Clicking
the Mouse Wheel
LEARN.
– Mouse Strokes
INNOVATE.
• Click and hold right mouse button
• Draw the letter O
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Zoom Functions
▪ Incremental Zoom
– Display Toolbar
– Plus or Minus key (No Shift)
– Ctrl + Mouse button scroll
▪ Zoom to Selected Object
– Hot Key J
J
NETWORK.
LEARN.
▪ Additional Zoom using the Preview Window
INNOVATE.
– Grab and drag
the square at the bottom right of the window.
– Only available if the zoom is not at full screen
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Panning
▪ Preview Window
– To move the zoom area, click and drag within the zoomed area
▪ Sheet Window
– The zoom area can also be moved using the vertical and horizontal
scrollbars.
▪ Mouse
– Scroll wheel: move vertically
NETWORK.
– Scroll wheel
+ SHIFT key: move horizontally
▪ Mouse StrokesLEARN.
– Click and hold
right mouse button.
INNOVATE.
– Drag in the direction to pan
– Release mouse button
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Grids
▪ Objects can only be placed on a grid point with their origin.
– View Grid
‒ The display grid is activated/deactivated using this button in the “Display” toolbar.
‒ With the corresponding setting objects can also be placed outside the view grid. Typically, the same grid size is used
as the working grid
– Working Grid
‒ The real placement grid is invisible but always active and independent from the view grid. The working grid size is
0.2” by default and can be changed if required.
– Snap Size
NETWORK.
‒ The SnapLEARN.
Size defines the distance from a grid point, or distance from an object in the circuit diagram, that the cursor
must beINNOVATE.
to enable the program to identify (or 'snap' to) the object or grid point.
– Alternative Grid
‒ Especially in connection with graphic objects and texts, it frequently happens that these must be placed on different
points compared to the working grid.
‒ Pressing the Ctrl key while placing, moving or inserting activates the alternative grid. The alternative grid size is 0.1in
by default and can be changed if required.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Grids
▪ Grid Settings
– Working Grid, Snap Size,
and Alternative Grid
NETWORK.
LEARN.
– Displayed Grid and Rulers
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Crosshairs and Rulers
▪ This button activates the crosshairs, which enable
users to place objects more easily along the
horizontal or vertical axis
NETWORK.
▪ This button activates
LEARN.rulers in the upper and lefthand sheet margins so objects can be placed more
INNOVATE.
exactly on sheet
coordinates
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Searching & Loading Components/Symbols from the Database
▪ Components and symbols can be loaded from
the database and then placed on a sheet. To
find the desired object in the database more
easily, a component search can be
configured.
– Click the right mouse button on the title bar to
open the context menu
– Choose the search fields, select OK
NETWORK.
– The search fields will appear at the top of the
library tree LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Levels
▪ All schematic objects, including connection lines and graphics, can
be arranged on up to 256 different levels. It’s often helpful to hide
or display specific levels for outputting on a printer, for example, in
combination with multilingual documentation or different graphical
displays.
Button
All Levels
Displays all levels
Used Levels Only
Displays only the levels used
Read Configuration
Loads the configuration file
(*.vis) with the level settings
Write Configuration
Generates the configuration file
with the current level settings
Symbol
Description
▪ Open using:
– Main Menu → View → Levels
Description
– Hotkey <L>
Complete symbol (graphics
and text)
NETWORK.
Graphic or part of a symbol
graphic
LEARN.
Text place holder belonging to
the symbol
INNOVATE.
Text place holder for symbol
texts (X) without contents
Free graphic on the schematic
sheet
Free text on the schematic
sheet
Graphical connection lines (not
cables / single conductors)
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Levels
▪ Graphics and free text can be designated “read-only” and placed on Level 253 “Read-only Level”.
– Graphics and free texts on this level cannot be selected and therefore not modified.
▪ This level must be selected in the Settings under Tools → Settings → Graphic and the option “Use read-only
level” activated.
▪ This can also be done using the
button.
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Project Overview
▪ After starting E³.series, a new or existing project can be opened
▪ New projects always receive the name “Untitled”
– A file with the name Untitled.e3s is generated on the hard drive
– If such a project file already exists, the file name receives a consecutive number
▪ The project name is displayed in the Project Window and in the Title Bar of E³.series
▪ Closing a project does not save the implemented modifications automatically. A query follows.
– With the command Save as ... a copy of the current project is created with a new project name
NETWORK.
– This project is also able to be edited
LEARN.
▪ A project file (.e3s) contains all data required for the schematic
INNOVATE.
– The project is independent from the database used to create it
Go To Agenda
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Creating Projects
▪ Clicking the Main Menu → File
▪ Clicking Ctrl+N
Ctrl
N
NETWORK.
▪ Clicking the New button on the Standard Toolbar
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Opening Existing Projects
▪ Clicking the Main Menu → Open
▪ Clicking Ctrl+O
Ctrl
O
NETWORK.
▪ Clicking the Open button on the Standard Toolbar
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Closing Projects
▪ Clicking the Main Menu → Close
▪ Clicking the Close button on the Standard Toolbar
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Saving Projects
▪ Clicking the Main Menu → Save
▪ Clicking Ctrl+S
Ctrl
S
▪ Clicking the Save button on the Standard Toolbar
NETWORK.
Save as a new name
LEARN.
▪ Clicking the Main
Menu → Save As
INNOVATE.
▪ Clicking F12
▪ No toolbar button
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Inserting a New Sheet
– Main Menu → Insert → Sheet
– Click Insert Sheet on the Placement Toolbar
NETWORK.
– In the Project Window context menu
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Inserting a New Sheet
▪ A dialog window appears, where the following can
be entered:
– Name
– HLA
– Location
– Format
– Type (Schematic, Panel, Formboard, etc)
– Position
NETWORK.
LEARN.
– Region (Panel and Formboard sheets only)
▪ Naming and INNOVATE.
Character Validity
– Length: 64 characters
– Permitted Characters: a-z; A-Z; 0-9; Special
Characters, except < > ; ‘ `
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Opening, Closing & Deleting Sheets
▪ Opening a sheet
– Click on the check box to the left of the respective sheet
▪ Opening multiple sheets simultaneously
– Mark the first sheet
– To mark an additional sheets
‒ Press the SHIFT key (for an area)
or
NETWORK.
‒ Press the
CTRL key for individual sheets.
– Open the context
menu and select the command Open.
LEARN.
▪ The same procedure
is used to close multiple sheets.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Opening, Closing & Deleting Sheets
▪ Delete a sheet by:
– Clicking the sheet in the Sheet Tree
– Click Delete
or
– Context Menu → Delete
▪ Deleting multiple sheets simultaneously
– Mark the first sheet
– To mark anNETWORK.
additional sheets
‒ Press theLEARN.
SHIFT key (for an area)
or
INNOVATE.
‒ Press the CTRL key for individual sheets.
– Click Delete
or
– Context Menu → Delete
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Renaming Sheets, Exchanging Sheet Formats, Adding Sheet
Texts
▪ Exchanging Sheet Formats, Adding Sheet Texts can be
accomplished in several ways
– Selecting Sheet Properties from the Context Menu on the sheet in
the Main Window
– Selecting Sheet Properties from the Sheet Tree in the Project
Window
– Clicking Main Menu → Format → Sheet Properties
▪ Renaming Sheets can be accomplished using the same
methods shown above, or by
NETWORK.
1.
Selecting the sheet from the Sheet Tree in the Project Window
2.
Clicking F2
LEARN.
INNOVATE.
▪ In addition, SOME
sheet information can be modified using
the Sheet Table
NOTE: It doesn’t make any difference if the Sheet Properties
are called up and changed in the Project Window or on the
sheet itself. The modifications take effect immediately on the
sheet and in the Project Window.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Arranging Sheet Windows
▪ Creates/Closes a new view of the active sheet
▪ Closes all opened sheet windows
▪ Multiple sheet windows can be organized to display
in the Main Window as tiled or cascaded
NETWORK.
LEARN.
▪ List of open sheets
– Inactive sheets
INNOVATE.
– Active sheet
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Reports Sheet/EXCEL/ASCII/ACCESS
Note: Because reports are generated using scripts, they are not online. This means modifications do not
directly affect the already created lists. They must be updated as required.
▪ Predefined lists such as Table of Contents, Bill of Materials, Connection Lists and Cable Lists can be output in
different formats (graphic Sheet, Excel, ASCII ...).
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Export / Import
• DXF / DWG
– File → Export → DXF/DWG
– File → Import → DXF/DWG
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Export / Import
PDF Export
▪ This function is only available if a PDF license exists!
▪ To open the PDF export dialog:
– File → Export → PDF
-OR– Right-click on a folder in the Project Tree sheet view and select the command PDF Export...
‒ and complete the following dialog:
NETWORK.
▪ Signals, potentials, cross-references and hyperlinks can be used to navigate in the generated PDF file.
LEARN.
Option
PDF/A Standard
Description
INNOVATE.
A standard used for the digital preservation of electronic documents (PDFs).
Document Security
To safeguard data exported from E3.Series, the PDF files can be protected.
i.e. the removal of texts and images can be restricted or password protected
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Export / Import
Export as Image
▪ Exporting Sheets as Image Files
– File → Export → Image
– Options can control
‒ Export Range
‒ Area / Selection
‒ Color Depth
NETWORK.
LEARN.
▪ Importing Images
– File → Import
→ Image
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Export / Import
Insert File
▪ It is possible to embed any files (e.g. PDF files, text files, etc.) as external documents in E³.series using the
command:
– Insert → File
– Insert File in the Sheet Tree context menu
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Printing
▪ File → Print
▪ Context Menu
▪ Key combination 'CTRL + P'
▪ Outputting on the Installed Printer
– Margins:
‒ With the margins set at 0 mm, the entire sheet is used
for printing.
NETWORK.
‒ Otherwise, a “punched hole border” can be defined
along the LEARN.
left-hand margin.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Printing
Outputting Print Areas
▪ Formboard sheets are usually larger than a printed page this function can be used to distribute the entire
formboard sheet over multiple printed pages (“Poster Print”).
▪ When editing a sheet format in the Database Editor using the Symbol Properties, there is the new tab ‘Print
Area’, in which the sheet can be subdivided into multiple print areas.
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
E3.series Beginner Basics
Printing
▪ These settings are used if the sheet is to be subdivided into several print areas
Print crop marks
Outputs crop marks on the corners of the
print area.
Print page numbers
Outputs the page numbers of the adjacent
sheets (left, right, above and below) in the
margins outside the defined print area as well
as the current page number.
NETWORK.
Sheet order
LEARN.
The arrows specify the sheet order, starting
with which column or row, for printing. It first
INNOVATE.
prints in the direction of the darker arrow.
Select pages
Individual print areas can be selected and
printed.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016
NETWORK.
LEARN.
INNOVATE.
Zuken
proprietary
information.
Forwarding
beyond
intended
recipient(s)
is not
permitted.
Zuken
proprietary
information.
Forwarding
beyond
the the
intended
recipient(s)
is not
permitted.
©©2018
ZukenZuken
2016