Uploaded by lyrrick

Build-Your-Dream-Car-Alfa-Romeo-Vintage-in-Wood

advertisement
instructables
Build Your Dream Car (Alfa Romeo Vintage in Wood)
by satyabrata M
Background
college, on my automotive clay model.
This Covid -19 lockdown seemed right out of a movie;
entertaining to watch but hard to digest in real life. It
was di cult to grasp that a single virus had made the
entire world come to a standstill. Fortunately, I chuckled
to myself, it’s not a Zombie virus, which would have
turned some into slow cannibals and left the rest
hysterical, running for their lives.
Four months passed by and gradually the lock down
restrictions eased but college remained shut. On one
ne day, as I was brooding over all the defeating
possibilities, I found a ray of hope. I always longed to
work on wood and my school teacher’s carpentry
workshop was near, yet I never had the time or the
opportunity to do so. This was the perfect hour to knock
on his door.
Covid-19, seemed a far more welcoming situation, yet
my empty mind was a devil’s workshop. I was becoming
a little restless with the long con nement, the
uncertainty of future, the gradual weight gain and
overdose of screen time. I wanted to be free working in
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 1
Step 1: Choose Your Dream Car
I have been fascinated about cars since childhood, so I
plunged into making one of my dream cars, an Alfa
Romeo 6c 1750 classic of 1928. I chose this model, as
classic cars have a soul of their own; their uid style,
elongated hood, sweeping fenders and elaborate design
has captured many a childhood imagination. Its glory
days have waned but it's ne wine, which turns exquisite
with the passing of time.
Please bear my blabbering, as its hard to stick to plain
sentences when one is talking about dreams. Speaking
of which, you can make your own dream car too, just
follow the process to build your own.
Note: As it was my rst project on wood, the entire
project took me 45 days, about 3 hour work session per
day. As I love cars, I stayed motivated. This is the reason
for you to choose your dream car, and take on a project
that will keep you inspired till the end. It is a di erent
matter if you are skilled and have some experience
working with wood.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 2
Step 2: Gather Your Tools
Machines and tools
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Lathe
Pillar drill
Belt sander
Fretsaw
Hand plane
Bench vise
G- clamp
Saw
Pro le gauge
Try square
Chisel and hammer
Files and rasps
Needle les
Sanding drum
Drill bits for wood
Materials
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 3
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Sandpapers of 600, 800 and 1000 grade
Sanding sealer
French polish
Thinner Wax
Cloth
Wood glue
Araldite
3 screws
1 cycle spoke
Acrylic sheet
Wood
1. Red cedar - used on the car body
2. White cedar / Beech / Pine - light colored wood for central strip on bonnet, headlight center and door
handle
3. Kalimaruthu wood - darker than Red cedar, for the wheels
4. Rose wood - used for the hub of the wheel, Front grille, Headlamp, steering wheel
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 4
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 5
Step 3: Use Blueprint to Scale the Car.
once I chose the car, I referred to a blueprint to maintain its right proportions.
I have provided the blueprint as a PDF le which if printed to scale in an A2 size paper, will give you the
dimensions of my model, which is in 1:5 scale.
Use this as a reference for the dimensions of most parts of the car.
If you are experienced you could just eyeball an image and achieve the volumes visually, but that requires some
experience in 3D modelling or sculpture. I have provided a jpg image to assist you with that in the next step.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 6
Download
https://www.instructables.com/ORIG/F3S/1RXB/KK9Q25M8/F3S1RXBKK9Q25M8.pdf
Step 4: Plan of Action
An Overview of the Entire Process
I began working with the largest parts, such as the base,
the hood and the rear, in order. I avoided working on
their details but worked on achieving the rough volume,
as seeing the car take shape quickly, would give you a
sense of progress. This would motivate you to work on
the details, which consumes more time.
Then I moved to the middle section of the vehicle; the
doors, the seats and the windscreen. After completion of
each part, assembled them to see the t and overall look.
Then I traced and cut the large sweeping fenders that
run the entire length of vehicle. Once they were made, I
worked on the wheels, the hub and the axle.
Following which, I worked on the the smaller parts, like
the grille, the headlamp, the steering wheel and the
door handle. After all the parts were made, I sanded and
polished them. Then assembled, polished and waxed the
car, to arrive at the nal result.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 7
Step 5: The Base
The Base in Red Cedar.
Determine the dimensions from the blueprint for the base.
Achieve the required height by a hand plane.
Mark the points where the axle would pass through.
Drill a hole of 3mm through the base, using a pillar drill.
Use a cycle spoke as axle. Cut it to desired length, taking thickness of wheels into consideration.
If you don't have a pillar drill, you could use the hand drill to make a hole on a smaller piece of wood, and stick it below
the base.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 8
Step 6: The Hood
The Hood in Red Cedar
The above ve images show the way I made the hood, but there is a more e cient and easier way to make it, which I
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 9
have sketched for a better understanding (image 6). Please ignore the sequence of the images and follow the sketch
(image 6) and instruction below.
Begin by cutting wood to a block, using the longer edge of bonnet as width.
Mark the center line on the rectangular block.
Drill a groove along the center line using a pillar drill.
Once a slit is made, insert a thin strip of wood and sand it ush to the block.
Refer to the front and top view to cut the block like the hood which narrows in front (image 1) and (image
6- 4th step)
Then chamfer the block to either side on the sanding belt.
Observe the Blueprint, the back of hood where the door hinges, is in an angle. ( image 7)
Replicate the angle by marking the line on block and chamfer it.
Use a at le or the sanding belt for this purpose.
Note: Inserting the central peach wood was an after thought as the singular color of hood was looking dull. This element
was to add contrast and enhance the design.
Safety tip: Wearing safety glasses and a mask is a must while sanding as ying sawdust can really get under your skin.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 10
Step 7: The Rear
The Rear in Red Cedar.
Cut wood to a rectangular block. Using the pro le view of blueprint, draw the curve on the side.(image 1)
Use belt sander to remove material and achieve the curved surface (image 1)
Draw the curve near backrest and use a semicircular rasp to sand material or use the pillar drill with
sanding drum to make the curved surface. (image 2 and 3)
Make the recess, a at surface where the stepney would sit by tracing the wheel's circumference and
sanding it with a at le or a rasp. (image 3)
Note: Do the last step using a completed wheel or with a circular paper cut out.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 11
Step 8: The Doors
The Doors in Red Cedar.
Select wood and cut to size.
Draw the curve on both doors and cut the curve using a fret saw. (image 4)
Use a semi circular le to clean the rough edges.
Rub with sand paper to give it a good nish.
This was an interesting experience as I was using a vintage fretsaw machine. I had to pedal like a sprinter on a sewing
machine, to keep the blade moving while my hands guided the wood. I was drenched in sweat after this ordeal. An
electric fretsaw wood avoid this physical labor but you would lose out on learning an interesting skill.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 12
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 13
Step 9: The Seats
The Seats in Red Cedar
Cut wood pieces according to top view, considering the width of both doors and the width of base.
Make the backrest by drawing the wave like curve from top (image 4)
Use a semi circular rasp and a drum sander to carve out this surface. (image 4)
Give it a smooth nish using a 800 grade sand paper.
Notice the backrest leans back in an angle (image 1)
Replicate the lean by shortening the edge that is closest to the rear. (image 1).
Step 10: Fenders
The Fenders in Red cedar
Draw the long sweeping fenders on a piece of wood. Cut it along the outline, using the fretsaw. (image 1)
Sand it with a 800 grade sand paper to smoothen the edges. (image 4)
Give a slope to the outer edge to reduce the bulky appearance of the fenders. (image 3 and 4)
The fth image is a glimpse of what the fenders would look like once the model nears completion.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 14
Note: Excuse the white paint on wood, as I was making the work more nature friendly and sustainable by using waste
pieces of wood.
Step 11: The WindShield
The Windshield in Red cedar
The windshield is very thin and there are chances of it cracking while making the cutout for the glass, so use two thin
pieces of wood.
Cut two thin pieces of wood and glue two surfaces such that their grain crisscross. This is done to
strengthen the wood. A plywood gets its strength, from multiple layers of wood compressed in such a
fashion.
Sand the glued wood and maintain thickness by using a pro le gauge.(image 3)
Trace the wind shield's glass section. Cut the part out by drilling 4 holes on each corner and cutting it out
with a fretsaw. (image 4)
Sand the edges with a at needle le.(image 5)
As the windshield rests against the hood in an angle, shorten the inner edge of windshield (image 7 and
8)
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 15
The Glass Screen
Get an acrylic sheet and trace the windscreen on the edge of that sheet.
Use a fretsaw to cut the outline of windscreen. Sand the edges with a at and triangle le.
Then t it in the recess created in the windshield wood piece.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 16
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 17
Step 12: The Wheels
The wheels are made in Kalimaruthu. This is a darker wood found in south of India used extensively in making furniture.
It was used to strike contrast between body and the wheels. you can substitute with a darker wood of your choice.
I made wheels with a lathe machine to give a smooth nish. It took me around 30 hrs, 10 days of 3 hours work session, to
complete the wheels. I wanted the project to be completely handmade and sustainable, so I did not mind the grind. This
task needs a bit of expertise and skill, so the presence of my teacher was very helpful. He guided me with the rst wheel
and I was able to make the rest on my own.
In case you nd it di cult to handle a lathe machine, you can either follow the laborious process of making it by drawing
a circle on a cube, then cut, sand and le it to size or look for custom wheels in eBay.
The Wheels on the Lathe Machine
Draw 4 circles (diameter of the wheels) on four blocks of wood. Draw a square around the circle such that
the circle is circumscribed. (image 2)
Cut wood to 4 cubes using the squares drawn on the blocks. Glue cylinders or small pieces of wood to the
cubes, which would hold it in place on lathe. (image 3 and 4)
Use the lathe to cut the cubes to a cylinder, keeping the circle on top face, as its diameter. (image 4)
Repeat the process 5 times for the 5 wheels. (image 5)
Draw a circle (diameter 2mm more than hub), on the faces of the four cylinders. Use a lathe and the
diameter of the circle, to carve the circular recess for the hub. (image 6)
Repeat the process 5 times for the 5 wheels.
The Hub in Rose wood
Cut Rose wood to a rectangular block. Draw a circle having the diameter of the hub, on one of its face. Cut
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 18
out its corners, to make it easier to grip on the lathe. (image 7)
Use lathe to make it a cylinder using the circle drawn as its diameter. (image 8 and 9)
Cut the cylinder into 5 pieces keeping 6 mm as thickness for 5 hubs for each wheel.
Glue the circular pieces on to the recess created on the wheel's cylinder. (image 10).
Use the bench vice to grip the set, and wait for 4 hours for it to dry.
Hold these cylinders on lathe and give a dome shaped curvature on the hub, using the lathe. (image 11)
Mark depth of 16 mm width and cut the wheel out from the cylinder. (image11)
Repeat the same for all 5 wheels.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 19
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 20
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 21
Step 13: The Front Grille
The Front Grille in Rose wood
Cut rose wood to dimensions of Front grille
Draw the home shaped design on the grille.
Use the pillar drill to make the groove following the outline of the design.
Cut thin strips of Beech wood, using the fretsaw.
Cut the strip to dimensions and glue it in the recess on the grille.
Sand it ush to the surface of the grille.
I made the design on grille, keeping aesthetic appeal of contrast in mind. You are free to do your own design on grille to
add a personal touch.
Note: I had to make two of them as I messed up with the rst. It was di cult to guide the small piece, while drilling the
hole.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 22
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 23
Step 14: Headlamp
Headlamp in Rose wood (dark) and Beech wood (white)
Make a cylinder of rosewood using the lathe (16 mm diameter). (image 2)
Make the recess on the cylinder, for holding the light circular part. (12 mm Diameter)
Make a cylinder of Beech wood (12 mm diameter).
Cut a circular piece of 3mm thickness on the Beech wood cylinder. (image 2)
Glue the piece to the Rosewood, let it dry for 4 hrs. (image 3)
Use lathe to give the rose wood, a tear drop shape (image 4)
Use lathe to give the Beech wood a slightly curved shape. (image 4)
Repeat the process for the other lamp (image 5)
Drill a hole on each fender and the Headlamp, using pillar drill.
Use a nail to join Headlamp to fender (image 6)
I chose the Rose wood and Beech wood to strike a contrast. Other white wood that you can use are Pine and Peach.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 24
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 25
Step 15: Steeringwheel
Steering Wheel in Rose wood
Make a rosewood cylinder on the lathe of (20mm diameter). (image 2)
Use the lathe to cut a circular recess of 5 mm depth and 16mm diameter.
Cut the cylinder with 5 mm from side, you will get a ring shaped wood (image3)
Use the same Rose wood cylinder to cut a circle of 16 mm diameter and 5 mm thickness. You would have
a circular piece (image 3)
Cut this circle equally on top and bottom and you will get the inner bar for the steering wheel. (image 5)
Make a hole in center of the bar and insert a small piece of wood, to attach the steering wheel to the
windshield. (image 6)
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 26
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 27
Step 16: Doorhandle
Door Handle in Pine wood.
I sketched and drew many handles and realized that, I had to make a design that would be easy to replicate as there are
two of them and that its such a tiny piece to work with.
Observe the door handle from the above images and make them by sanding with needle les.
You are also free to add a personal touch by making a design of your own for the handle.
I chose Pine wood for the handle as its a soft wood, so easier to carve and work with and to strike a contrast against the
dark Red Cedar door.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 28
Step 17: Dry Fit, Sanding, Polishing and Assembly
Assembling is the most exciting part as you see your hard work, nally come together and form the whole.
Drill holes for Assembly
Assembly was done either by joining parts with nails and screws or sticking them with glue. To join the parts with nail,
you need to rst drill holes using the pillar drill for accuracy. This is done to avoid the forming of cracks, while striking a
nail into the wood. Use your discretion to use drill bit of the right size when drilling holes.
Drill hole through the base and below the doors for inserting screw.
Screws will act as pivots for the door.
Drill holes in wheels to connect the axle.
Drill hole on the Rear to attach stepney, using a screw.
Drill hole on the side of base to attach fenders.
Drill hole on the Windshield to attach the steering wheel.
Drill hole on fenders to attach Headlamp.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 29
Sanding
Once you have completed drilling holes, sand all the parts using 600, 800 and 1000 grade sandpaper, in
succession.
Apply a coat of sanding sealer and sand with 1000 grade sandpaper for a good nish
Dry t and Polishing
Once all the parts are sanded, assemble them and mark the surfaces, that are going to be glued against each other.
Example: the bottom of hood and the top surface of the base.
Do not apply French polish on those marked surfaces as the glue will not be e ective, while assembling.
Apply 3 coats of French polish to all the other surfaces with a soft cloth.
Dry the parts for 15 minutes between each coat.
Assembly and Wax
Stick the Hood, the Seats and the Rear to Base.
Stick the Grille and the Windshield to the Hood.
Screw the doors to base and Stepney to the Rear.
Using nails attach the Headlamps to the Fenders and the Fenders to the Base
Once all the parts are assembled, insert the axles through the base and glue the wheels to them.
Apply a nal coat of polish to the assembled car with a soft cloth.
Apply wax using a soft cloth and bu the surfaces to satisfactory shine and nish.
Voila Mission successful!! Your car is nally ready for a drive around the country side.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 30
Step 18: Take It for a Drive
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 31
Once the car is bu ed and shining take it outdoors for a
drive. Capture this moment of pride, through the lens
and preserve it in your heart. Give yourself a treat, by
breathing in the fresh air and basking in the warm sun.
You have earned it.
You have earned this moment of glory and if you must
part with it, make it a present to a loved one, as little can
be more precious than your time and e ort. If you
decide to keep, display it on your study table as a badge
of honor and as the fruit of your hard work.
If you liked this Instructable and are eager to make
your own dream car, please vote for me in the 'First
Time Author Contest'.
Thankyou.
Build Your Dream Car (Alfa Romeo Vintage in Wood): Page 32
Download