See discussions, stats, and author profiles for this publication at: https://www.researchgate.net/publication/323144729
Direct 3D printing of silicone facial prostheses: A preliminary experience in
digital workflow
Article in The Journal of prosthetic dentistry · February 2018
DOI: 10.1016/j.prosdent.2017.11.007
CITATIONS
READS
104
2,477
5 authors, including:
Alexey Unkovskiy
Fabian Huettig
Charité Universitätsmedizin Berlin
Universitätsklinikum Tübingen
41 PUBLICATIONS 647 CITATIONS
102 PUBLICATIONS 1,371 CITATIONS
SEE PROFILE
Constanze Keutel
University of Tuebingen
28 PUBLICATIONS 439 CITATIONS
SEE PROFILE
Some of the authors of this publication are also working on these related projects:
Additive manufacturing of biomaterials View project
German CMD-Centers Study View project
All content following this page was uploaded by Fabian Huettig on 12 August 2018.
The user has requested enhancement of the downloaded file.
SEE PROFILE
Direct 3D printing of silicone facial prostheses:
a preliminary experience in clinical application
by Dr. Alexey Unkovskiy,a Sebastian Spintzyk, B.Sc.,b Joern Brom,c Dr. Fabian Huettig,d
Dr. Dr. Constanze Keutele
FULLTEXT LINK ACCESSIBLE UNTIL September 28, 2018
https://authors.elsevier.com/c/1XX9755rYWw6J
a,d
Department of Prosthodontics at the Centre of Dentistry, Oral Medicine, and
Maxillofacial Surgery with Dental School, Tubingen University Hospital
Osianderstr. 2-8, 72076 Tübingen, Germany
b
Material Science Engineer, Section Medical Material Science and Technology. Tubingen
University Hospital, Osianderstr. 2-8, 72076 Tübingen, Germany
c
Anaplastologist, Brom Epithetik, Heidelberg, Mittermaierstrasse 25, 69115 Heidelberg
e
Senior Associate, Department of Oral and Maxillofacial Surgery at the Centre of Dentistry,
Oral Medicine and Maxillofacial Surgery with Dental School, Tubingen, University Hospital,
Osianderstr. 2-8, 72076 Tübingen, Germany
Corresponding author: Dr. Alexey Unkovskiy
E-mail: Alexey.Unkovskiy@med.uni-tuebingen.de
REFERENCES:
1. He Y, Xue GH, Fu JZ. Fabrication of low cost soft tissue prostheses with the desktop 3D
printer. Sci Rep 2014;4:6973.
2. Unkovskiy A, Spintzyk S, Axmann D, Engel E, Weber H, Huettig F. Additive
manufacturing: A comparative analysis of dimensional accuracy and skin texture reproduction
of auricular prostheses replicas. J Prosthodont 2017;[Epub ahead of
print]:10.1111/jopr.12681.
3. Unkovskiy A, Huettig F, Brom J, Keutel C. Auricular Prostheses Produced by Means of
Conventional and Digital Workflows: A Clinical Report on Esthetic Outcomes. Int J
Prosthodont 2017;[Epub ahead of print]:10.11607/ijp.5446.
4. Yadav S, Narayan AI, Choudhry A, Balakrishnan D. CAD/CAM-Assisted Auricular
Prosthesis Fabrication for a Quick, Precise, and More Retentive Outcome: A Clinical Report.
J Prosthodont 2017;[Epub ahead of print]:10.1111/jopr.12589.
5. Eggbeer D, Bibb R, Evans P, Ji L. Evaluation of direct and indirect additive manufacture of
maxillofacial prostheses. Proc Inst Mech Eng H 2012;226:718-28.
6. Xiao K, Zardawi F, van Noort R, Yates JM. Color reproduction for advanced manufacture
of soft tissue prostheses. J Dent 2013;41 Suppl 5:e15-23.
7. Jindal SK, Sherriff M, Waters MG, Coward TJ. Development of a 3D printable
maxillofacial silicone: Part I. Optimization of polydimethylsiloxane chains and cross-linker
concentration. J Prosthet Dent 2016;116:617-22.
8. Jindal SK, Sherriff M, Waters MG, Smay JE, Coward TJ. Development of a 3D printable
maxillofacial silicone. Part II: Optimization of moderator and thixotropic agent. J Prosthet
Dent 2017;[Epub ahead of print]:10.1016/j.prosdent.2017.04.028.
View publication stats