HVAC
Technical Portfolio
DESIGN
HVAC System Calculation
Professional Approch
OVER 20 YEARS OF EXPERIENCE IN HVAC DESIGN
• Design concept finalization and system selection considering
stability, practicality, aesthetics, engineering economy, and
common engineering practices. • Space Heat Load Calculation
and Ducting Design using Elite CHVAC, Elite Duct Size, Career
HAP, Trane Trace, Revit, & Excel. • Heat Transfer Coefficient
(U-Value) Calculations, Ventilation Calculations, Static
Pressure Calculations • HVAC Duct Sizing and Routing as per
ASHRAE and SMACNA Standards, space availability, and
construction hurdles.
A SIMPLIFIED DESIGN APPROACH
We don't encourage complications therefore we avoid messy
decision to the maximum by alternating to a simplified design
approvach.
MANIFESTATION OF COMFORT ZONE
Cooling System
Heating System
Ventilation System
This function is used to
cool off the air in a
building before it
reaches the occupants.
This can be done by
using evaporative
cooling or heat pumps.
This is used to warm up
the air in a building so
that it can be circulated
throughout the entire
structure.
Ventilation helps remove
stale air from buildings by
pushing fresh air through
them. This prevents odors
from forming inside of
structures where people
spend most of their time.
WORK EXPERIENCE
01
02
03
SWRO-1
Midyan Gas Field,
RKPP
HVAC E=Detailed Engineering
for
Saline Water Reverse Osmosis Plant-1
at
Al-Khobar, Saudi Arabia
--210,000 m³/day Capacity
HVAC Design
for
Midyan Gas Plant
at
Tabuk, Saudi Arabia
--75MMscfd of gas and 4,500 barrels a
day of condensates
HVAC Design
for
Ras Al-Khair Power Plant
at
Jubail, Saudi Arabia
--2365MW (Combined Cycle)
SKILLS &
ABILITIES
HVAC Design
CFD Simulations
BIM Modeling
Building Energy Modeling
SAFETY
QUALITY
PROFESSIONALISM
We Care, about Air
SHUQAIQ-3, IWP
HVAC Detailed Engineering
for
Shuqaiq-3 Independent Water
Project, Saudi Arabia
--450,000 m³/day
ARPBH
Complete MEP Design for Al-Rashid Palace Banquet Halls,
Associated Restaurant, Gaming Area & Bakery
Sanberyal, Pakistan
SS#8919 & 8922
HVAC & Plumbing Design
for
8919 & 8922 115/13.8kV Electrical
Substations
in
Riyadh, Saudi Arabia
LET'S WORK
TOGETHER
EMAIL
em@seegapak.biz
MOBILE
+92 340 5141397
MAILING ADDRESS
#2, 4th Floor, Icon Tower II,
Block M, New City Phase 2
Wah Cantt, Pakistan 47040