3900 Series Base Station
V100R009C00
Technical Description
Issue
05
Date
2014-08-30
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address:
Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website:
http://www.huawei.com
Email:
support@huawei.com
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
i
3900 Series Base Station
Technical Description
About This Document
About This Document
Huawei 3900 series base stations adopt a uniform modular design for multiple radio network
systems. These base stations support the co-existence of devices serving different modes at the
same site, sharing of base station resources, and unified operation and maintenance. With these
merits, operators' requirements of evolution to multimode base stations become possible. This
document describes the network architecture, logical structure, physical devices, product
specifications, and reliability of 3900 series base stations.
NOTE
l 3900 series base stations described in this document do not include the LampSite. For technical descriptions
about the LampSite, see LampSite Technical Description.
l If eNodeB is used rather than eNodeB FDD or eNodeB TDD in this document, the eNodeB can be an eNodeB
FDD or an eNodeB TDD. If LTE is used rather than LTE FDD or LTE TDD in this document, the LTE
mode can be the LTE FDD mode or LTE TDD mode.
l In this document, G is short for GSM, U is short for UMTS, L is short for LTE FDD and T is short for LTE
TDD.
Product Version
The following table lists the product versions related to this document.
Product Name
Solution Version
Product Version
BTS3900
l SRAN9.0
V100R009C00
BTS3900A
BTS3900L
l GBSS16.0
l RAN16.0
l eRAN7.0
BTS3900AL
DBS3900
l SRAN9.0
l GBSS16.0
l RAN16.0
l eRAN7.0
l eRAN TDD 7.0
BTS3900C
l SRAN9.0
l RAN16.0
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
3900 Series Base Station
Technical Description
About This Document
This document is intended for:
l
Network planning engineers
l
Field engineers
l
System engineers
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iii
3900 Series Base Station
Technical Description
Contents
Contents
About This Document.....................................................................................................................ii
1 Changes in the 3900 Series Base Station Technical Description..........................................1
2 Network Architecture.................................................................................................................13
2.1 BTS in the RAN Physical Layer...................................................................................................................................14
2.2 BTS in the RAN Logical Layer....................................................................................................................................15
2.3 Mapping of a BTS in the RAN Physical Layer and RAN Logical Layer....................................................................17
3 Logical Structure..........................................................................................................................19
3.1 BTS Subsystems...........................................................................................................................................................20
3.2 BTS Functional Structure.............................................................................................................................................21
3.3 Deployment of 3900 Series Base Stations....................................................................................................................22
3.3.1 Co-MPT Base Stations..............................................................................................................................................22
3.3.2 Separate-MPT Base Stations.....................................................................................................................................23
3.3.3 Different Functions with Different Deployment Methods........................................................................................28
4 Physical Devices..........................................................................................................................30
4.1 Cabinets........................................................................................................................................................................31
4.2 BBU..............................................................................................................................................................................32
4.3 RF Module....................................................................................................................................................................32
4.3.1 RFU...........................................................................................................................................................................33
4.3.2 RRU...........................................................................................................................................................................34
4.3.3 AAU...........................................................................................................................................................................37
5 Product Specifications................................................................................................................38
5.1 Technical Specifications of the BBU...........................................................................................................................39
5.1.1 Capacity Specifications.............................................................................................................................................39
5.1.2 Baseband Specifications............................................................................................................................................45
5.1.3 Signaling Specifications............................................................................................................................................68
5.1.4 CPRI Specifications...................................................................................................................................................76
5.1.5 Transmission Port......................................................................................................................................................84
5.1.6 Engineering Specifications........................................................................................................................................85
5.2 Technical Specifications of RFUs................................................................................................................................91
5.2.1 DRFU Technical Specifications................................................................................................................................91
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
iv
3900 Series Base Station
Technical Description
Contents
5.2.2 GRFU Technical Specifications................................................................................................................................96
5.2.3 WRFU Technical Specifications.............................................................................................................................104
5.2.4 WRFUa Technical Specifications...........................................................................................................................111
5.2.5 WRFUd Technical Specifications...........................................................................................................................114
5.2.6 WRFUe Technical Specifications...........................................................................................................................122
5.2.7 CRFUd Technical Specifications............................................................................................................................129
5.2.8 CRFUe Technical Specifications.............................................................................................................................134
5.2.9 LRFU Technical Specifications...............................................................................................................................138
5.2.10 LRFUe Technical Specifications...........................................................................................................................141
5.2.11 MRFU Technical Specifications...........................................................................................................................147
5.2.12 MRFUd Technical Specifications.........................................................................................................................160
5.2.13 MRFUe Technical Specifications..........................................................................................................................172
5.3 Technical Specifications of RRUs..............................................................................................................................180
5.3.1 RRU3004 Technical Specifications.........................................................................................................................180
5.3.2 RRU3008 Technical Specifications.........................................................................................................................186
5.3.3 RRU3801E Technical Specifications......................................................................................................................198
5.3.4 RRU3804 Technical Specifications.........................................................................................................................204
5.3.5 RRU3805 Technical Specifications.........................................................................................................................211
5.3.6 RRU3806 Technical Specifications.........................................................................................................................219
5.3.7 RRU3808 Technical Specifications.........................................................................................................................225
5.3.8 RRU3821E Technical Specifications......................................................................................................................241
5.3.9 RRU3824 Technical Specifications.........................................................................................................................249
5.3.10 RRU3826 Technical Specifications.......................................................................................................................254
5.3.11 RRU3828 Technical Specifications.......................................................................................................................260
5.3.12 RRU3829 Technical Specifications.......................................................................................................................270
5.3.13 RRU3832 Technical Specifications.......................................................................................................................279
5.3.14 RRU3838 Technical Specifications.......................................................................................................................297
5.3.15 RRU3839 Technical Specifications.......................................................................................................................306
5.3.16 RRU3201 Technical Specifications.......................................................................................................................316
5.3.17 RRU3203 Technical Specifications.......................................................................................................................323
5.3.18 RRU3220 Technical Specifications.......................................................................................................................330
5.3.19 RRU3221 Technical Specifications.......................................................................................................................337
5.3.20 RRU3222 Technical Specifications.......................................................................................................................345
5.3.21 RRU3229 Technical Specifications.......................................................................................................................352
5.3.22 RRU3240 Technical Specifications.......................................................................................................................360
5.3.23 RRU3260 Technical Specifications.......................................................................................................................368
5.3.24 RRU3262 Technical Specifications.......................................................................................................................375
5.3.25 RRU3268 Technical Specifications.......................................................................................................................385
5.3.26 RRU3628 Technical Specifications.......................................................................................................................394
5.3.27 RRU3632 Technical Specifications.......................................................................................................................401
5.3.28 RRU3638 Technical Specifications.......................................................................................................................407
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v
3900 Series Base Station
Technical Description
Contents
5.3.29 RRU3642 Technical Specifications.......................................................................................................................413
5.3.30 RRU3841 Technical Specifications.......................................................................................................................420
5.3.31 RRU3908 Technical Specifications ......................................................................................................................428
5.3.32 RRU3926 Technical Specifications.......................................................................................................................446
5.3.33 RRU3928 Technical Specifications.......................................................................................................................458
5.3.34 RRU3929 Technical Specifications.......................................................................................................................471
5.3.35 RRU3936 Technical Specifications.......................................................................................................................486
5.3.36 RRU3938 Technical Specifications.......................................................................................................................500
5.3.37 RRU3939 Technical Specifications.......................................................................................................................513
5.3.38 RRU3942 Technical Specifications.......................................................................................................................522
5.3.39 RRU3961 Technical Specifications.......................................................................................................................547
5.3.40 RRU3232 Technical Specifications.......................................................................................................................563
5.3.41 RRU3251 Technical Specifications.......................................................................................................................568
5.3.42 RRU3252 Technical Specifications.......................................................................................................................573
5.3.43 RRU3253 Technical Specifications.......................................................................................................................579
5.3.44 RRU3256 Technical Specifications.......................................................................................................................583
5.3.45 RRU3259 Technical Specifications.......................................................................................................................588
5.4 Technical Specifications of AAUs.............................................................................................................................593
5.4.1 AAU3902 Technical Specifications........................................................................................................................593
5.4.2 AAU3910 Technical Specifications........................................................................................................................613
5.5 Engineering Specifications of Cabinets......................................................................................................................631
5.5.1 BTS3900 Engineering Specifications......................................................................................................................631
5.5.2 BTS3900L Engineering Specifications...................................................................................................................637
5.5.3 BTS3900A Engineering Specifications...................................................................................................................642
5.5.4 BTS3900AL Engineering Specifications................................................................................................................648
5.5.5 DBS3900 Engineering Specifications.....................................................................................................................653
5.5.6 BTS3900C Engineering Specifications...................................................................................................................656
6 Reliability....................................................................................................................................662
Index................................................................................................................................................664
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
vi
3900 Series Base Station
Technical Description
1
1 Changes in the 3900 Series Base Station Technical
Description
Changes in the 3900 Series Base Station
Technical Description
This section describes changes in the 3900 Series Base Station Technical Description of each
version.
05 (2014-08-30)
This is Issue 05.
Compared with Issue 04 (2014-07-30), this issue does not include any new information.
Compared with Issue 04 (2014-07-30), this issue includes the following changes.
Topic
Change Description
5.1.1 Capacity Specifications
l Modified board configurations in the
capacity specifications of 3900 series base
stations working in UMTS mode.
l Modified the maximum number of cells
supported by a BBU and the maximum
number of UEs in RRC_Connected mode
supported by an eNodeB FDD in the
capacity specifications of 3900 series base
stations working in LTE FDD mode.
l Modified the capacity specifications of
3900 series base stations working in
multiple modes.
5.1.2 Baseband Specifications
l Updated the maximum number of cells
supported by the LBBP and UBBP boards
working in LTE FDD mode.
l Updated the maximum number of UEs in
RRC_Connected mode in LTE FDD
mode.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
5.1.3 Signaling Specifications
l Modified the signaling specifications of
the eNodeB.
l Modified signaling specifications of a coMPT multimode base station.
5.2.12 MRFUd Technical Specifications,
5.3.33 RRU3928 Technical Specifications,
5.3.34 RRU3929 Technical Specifications,
5.3.36 RRU3938 Technical Specifications
Added the UL mode when the MRFUd,
RRU3928, RRU3929, and RRU3938
working in the 900 MHz frequency band.
5.3.8 RRU3821E Technical Specifications
Added the power specifications of the
RRU3821E.
Compared with Issue 04 (2014-07-30), this issue does not exclude any information.
04 (2014-07-30)
This is Issue 04.
Compared with Issue 03 (2014-06-30), this issue includes the following new topic:
l
5.3.24 RRU3262 Technical Specifications
Compared with Issue 03 (2014-06-30), this issue includes the following changes.
Issue 05 (2014-08-30)
Topic
Change Description
5.2.10 LRFUe Technical Specifications
Added specifications when the LRFUe works
in the 700 MHz frequency band.
5.3.17 RRU3203 Technical Specifications
Modified the carrier number specifications
supported by the RRU3203.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
5.3 Technical Specifications of RRUs
l Added the following description in the
technical specifications of the RRU3824,
RRU3826, RRU3832, RRU3838,
RRU3839, RRU3936, RRU3938,
RRU3939, RRU3260, RRU3268,
RRU3632, and RRU3638: According to
the installation scenario, traffic load, and
carrier configuration, the output power of
some RRUs may temporarily decrease
when they work in the highest 10°C
temperature range.
l Technical specifications of the RRU3808,
RRU3821E, RRU3832, RRU3908,
RRU3926, RRU3928, RRU3929,
RRU3936, RRU3938, RRU3939,
RRU3942, and RRU3961: Modified the
maximum distance between the RRUs and
BBU in multimode scenarios.
Compared with Issue 03 (2014-06-30), this issue does not exclude any topics.
03 (2014-06-30)
This is issue 03.
Compared with Issue 02 (2014-05-27), this issue does not include any new topics.
Compared with Issue 02 (2014-05-27), this issue includes the following changes.
Issue 05 (2014-08-30)
Topic
Change Description
5.2.9 LRFU Technical Specifications,
5.3.16 RRU3201 Technical Specifications,
5.3.17 RRU3203 Technical Specifications
Added a description that the LRFU,
RRU3201, and 3203 do not support the 1T2R
configuration.
5.3.7 RRU3808 Technical Specifications
Added the following description: The
RRU3808 does not support the 1T2R
configuration when working in LTE FDD
mode.
5.3.38 RRU3942 Technical Specifications
Added the LTE and UL modes supported by
the RRU3942 working in the 850 MHz
frequency band.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
1 Changes in the 3900 Series Base Station Technical
Description
3900 Series Base Station
Technical Description
Topic
Change Description
5.4 Technical Specifications of AAUs
l Optimized the layout of technical
specifications of AAUs.
l Added the equivalent isotropically
radiated power (EIRP) specifications and
the storage time requirements to the
technical specifications of all types of
AAUs.
Compared with Issue 02 (2014-05-27), this issue does not exclude any topics.
02 (2014-05-27)
This is Issue 02.
Compared with 01 (2014-04-26), this issue does not include any new topics.
Compared with 01 (2014-04-26), this issue includes the following changes:
Topic
Change Description
5.3.41 RRU3251 Technical Specifications
and 5.3.42 RRU3252 Technical
Specifications
Modified the operating temperature.
5.3.16 RRU3201 Technical Specifications
Modified the output power.
5.1.1 Capacity Specifications
Modified the maximum cell throughput
supported by an LTE TDD cell.
5.1.3 Signaling Specifications
Modified signaling specifications of
eNodeBs.
5.1.6 Engineering Specifications
Added Noise Sound Power Level and
Storage Time to Environment
Specifications.
Compared with 01 (2014-04-26), this issue does not exclude any topics.
01 (2014-04-26)
This is Issue 01.
Compared with Draft D (2014-04-10), this issue does not include any new topics.
Compared with Draft D (2014-04-10), this issue includes the following changes:
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
1 Changes in the 3900 Series Base Station Technical
Description
3900 Series Base Station
Technical Description
Topic
Change Description
5.3 Technical Specifications of RRUs
Added the following description in the
technical specifications of the RRU3824,
RRU3826, RRU3828, RRU3829, RRU3832,
RRU3838, RRU3839, RRU3221, RRU3229,
RRU3240, RRU3260, RRU3268, RRU3628,
RRU3632, RRU3638, RRU3642, RRU3841,
RRU3926, RRU3928, RRU3929, RRU3936,
RRU3938, RRU3939, and RRU3942: The
RRU supports AC power supply when
connected to an external AC/DC power
module or an OPM15M. For details, see AC/
DC Power Module User Guide and OPM15M
User Guide.
5.5 Engineering Specifications of Cabinets
l Moved descriptions about Noise from
Standards to Noise Sound Power
Level in Environment Specifications
and added the corresponding sound power
level.
l Moved descriptions about the storage time
from Storage in Standards to Storage
Time in Environment Specifications.
5.3 Technical Specifications of RRUs and
5.4 Technical Specifications of AAUs
Added requirements for the storage time to
the technical specifications of RRUs and
AAUs.
3900 Series Base Station Power
Consumption Specifications
l Added power consumption of the
RRU3936 when it works in the 850 MHz
and 1900 MHz frequency bands,
respectively.
l Added power consumption of the
RRU3942 when it works in the 1900 MHz
frequency band in GUL triple modes.
Compared with Draft D (2014-04-10), this issue does not exclude any topics.
Draft D (2014-04-10)
This is Draft D.
Compared with Draft C (2014-03-26), this issue includes the following new topics:
l
5.3.45 RRU3259 Technical Specifications
Compared with Draft C (2014-03-26), this issue incorporates the following changes:
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
5.1.2 Baseband Specifications
Modify the number of cells supported by a
UBBPd9 working in LTE TDD mode.
5.3.43 RRU3253 Technical Specifications
Modify the description for the output power:
when the uplink-downlink subframe
configuration 2:2 is used, the maximum
output power of the RRU3253 is 8 x 16 W.
5.3.44 RRU3256 Technical Specifications
Added specifications when the RRU3256
operates in the 3500 MHz frequency bands.
5.1.4 CPRI Specifications
Added the maximum number of cells
supported by a UBBP when it works at a data
rate of 6.144 Gbit/s in UMTS mode.
Compared with Draft C (2014-03-26), this issue does not exclude any topics.
Draft C (2014-03-26)
This is Draft C.
Compared with Draft B (2014-02-28), this issue does not include any new topics.
Compared with Draft B (2014-02-28), this issue incorporates the following changes:
Issue 05 (2014-08-30)
Topic
Change Description
2.1 BTS in the RAN Physical Layer
Modified the names of feature parameter
description documents related to the transport
network.
5.1.1 Capacity Specifications
GSM capacity specifications: Added BBU
board configurations when GSM baseband
signals are processed by the UBBPd and the
TDM transmission scheme is used.
5.1.2 Baseband Specifications
Added the maximum number of cells
supported by LTE FDD in the baseband
specifications of a multimode base station.
5.1.3 Signaling Specifications
Modified the signaling specifications of an
eNodeB in UMPT+UBBPd scenarios.
5.1.4 CPRI Specifications
Added the maximum number of cells
supported by a WBBPf when its CPRI data
rate is 4.9 Gbit/s and 6.144 Gbit/s,
respectively.
5.3.35 RRU3936 Technical Specifications
Added specifications when the RRU3936
operates in the 850 MHz and 1900 MHz
frequency bands.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
5.3.16 RRU3201 Technical Specifications,
5.3.17 RRU3203 Technical Specifications,
5.3.18 RRU3220 Technical Specifications,
5.3.19 RRU3221 Technical Specifications,
5.3.20 RRU3222 Technical Specifications,
5.3.21 RRU3229 Technical Specifications,
5.3.22 RRU3240 Technical Specifications,
5.3.23 RRU3260 Technical Specifications,
5.3.25 RRU3268 Technical Specifications,
5.3.26 RRU3628 Technical Specifications,
5.3.27 RRU3632 Technical Specifications,
5.3.28 RRU3638 Technical Specifications,
5.3.29 RRU3642 Technical Specifications,
5.3.30 RRU3841 Technical Specifications
Modified the maximum distance between an
RRU and a BBU.
5.2 Technical Specifications of RFUs, 5.3
Technical Specifications of RRUs, 5.4
Technical Specifications of AAUs
Added a description for the typical output
power configurations in the technical
specifications of RFUs, RRUs, and AAUs:
The output power per carrier in the output
power table provides the maximum output
power possible while ensuring the network
performance.
5.4.1 AAU3902 Technical Specifications
l Optimized the configuration information
of virtual antenna ports on an AAU3902.
l Modified the surge protection
specifications of ports on an AAU3902.
Compared with Draft B (2014-02-28), this issue does not exclude any topics.
Draft B (2014-02-28)
This is Draft B.
Compared with Draft A (2014-01-20), this issue does not include any new topics.
Compared with Draft A (2014-01-20), this issue includes the following changes:
Issue 05 (2014-08-30)
Topic
Change Description
5.1.1 Capacity Specifications
Renamed "Maximum Number of Cells per
eNodeB FDD" to "Maximum Number of
Cells per BBU" and modified its
specifications.
5.2.11 MRFU Technical Specifications
Modified the output power for an MRFU V2/
MRFU V2a (900 MHz/1800 MHz, GL
MSR).
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
5.3.25 RRU3268 Technical Specifications
Modified the receive and transmit frequency
bands of the RRU3268 operating in the 800
MHz frequency band.
5.5.2 BTS3900L Engineering
Specifications
Modified the equipment specifications of a
BTS3900L cabinet.
5.4.1 AAU3902 Technical Specifications
Modified the output power for the AAU3902
(GL, 1800 MHz, 3 sectors).
Compared with Draft A (2014-01-20), this issue excludes the following topics:
l
Moved descriptions about the pRRU and RHUB3908 from 4 Physical Devices to LampSite
Technical Description.
l
Moved technical specifications of the pRRU and RHUB3908 from 5 Product
Specifications to LampSite Technical Description.
Draft A (2014-01-20)
This is draft A.
Compared with Issue 07 (2013-08-29) of V100R008C00, this issue includes the following new
topics:
l
pRRU
l
RHUB3908
l
5.3.15 RRU3839 Technical Specifications
l
5.3.40 RRU3232 Technical Specifications
l
5.3.41 RRU3251 Technical Specifications
l
5.3.42 RRU3252 Technical Specifications
l
5.3.43 RRU3253 Technical Specifications
l
5.3.44 RRU3256 Technical Specifications
l
5.3.36 RRU3938 Technical Specifications
l
5.3.37 RRU3939 Technical Specifications
l
pRRU3901 Technical Specifications
l
RHUB3908 Technical Specifications
l
5.4.1 AAU3902 Technical Specifications
Compared with Issue 07 (2013-08-29) of V100R008C00, this issue incorporates the changes
described in the following table.
Issue 05 (2014-08-30)
Topic
Change Description
2.3 Mapping of a BTS in the RAN Physical
Layer and RAN Logical Layer
Modified the presentation of the mapping of
a BTS in the RAN physical layer and RAN
logical layer from a figure to a video.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
4.2 BBU
l Changed the title to BBU.
l Modified descriptions of the BBU3910.
l Added descriptions of the RRU3938,
RRU3939, RRU3839, RRU3232,
RRU3251, RRU3252, RRU3253, and
RRU3256.
4.3.2 RRU
l Added GUL to the supported modes of the
RRU3942.
4.3.3 AAU
Added descriptions of the AAU3902.
5.1 Technical Specifications of the BBU
Changed the title to Technical
Specifications of the BBU.
5.1.1 Capacity Specifications
l GSM: Modified the capacity
specifications.
l UMTS: Modified capacity specifications.
l LTE FDD:
– Modified the maximum number of
cells supported by an eNodeB FDD.
– Modified the maximum throughput
supported by a cell whose bandwidth
is 20 MHz.
– Modified the maximum number of
UEs in RRC_connected mode
supported by an eNodeB FDD when
an LBBPd is configured. Added the
maximum number of UEs in
RRC_connected mode supported by
an eNodeB FDD when a UBBPd is
configured.
l Added capacity specifications for the LTE
TDD mode.
l Added capacity specifications when a
3900 series base station works in multiple
modes.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
5.1.2 Baseband Specifications
l Added specifications for the UBBP.
l Modified the maximum number of UEs in
RRC_connected mode supported by an
LTE FDD cell and an LBBPd,
respectively when the cell bandwidth is
1.4 MHz.
l Modified the maximum cell throughput
supported by an LTE FDD cell.
l Added baseband specifications for the
eNodeB TDD.
l Added baseband specifications when a
3900 series base station works in multiple
modes.
5.1.3 Signaling Specifications
l Modified signaling specifications of a
NodeB.
l Modified signaling specifications of an
eNodeB.
l Modified signaling specifications of a coMPT multimode base station.
5.1.4 CPRI Specifications
l Added CPRI specifications of a UBRI.
l Modified CPRI specifications of an
LBBPd. Added the number of cells
supported by 6.144 Gbit/s and 9.8 Gbit/s
LBBPds, respectively.
l Added CPRI specifications of a UBBP.
5.1.5 Transmission Port
l Changed the title to Transmission Port.
l Added transmission port specifications
for the LTE TDD mode.
l UMTS: Added specifications of
transmission ports on the UTRPa.
Issue 05 (2014-08-30)
5.1.6 Engineering Specifications
Added specifications for the BBU3910.
5.5.1 BTS3900 Engineering Specifications
Modified the input power, size, and weight of
a BTS3900 (Ver.D) cabinet.
5.5.2 BTS3900L Engineering
Specifications
Modified the input power, size, and weight of
a BTS3900L (Ver.D) cabinet.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
5.4.2 AAU3910 Technical Specifications
l Modified the frequency band
specifications of an AAU3910.
l Added the specifications of AAU3910
operating in the 1.8A+2.6P, 2.6A+2.1A,
and 2.6A+1.8A scenarios.
l Modified the size and weight.
l Added the maximum distance of the
RU3832 from the BBU when the RU3832
works in LTE and UL modes.
l Modified the surge protection
specifications.
l Modified the protection rating.
Issue 05 (2014-08-30)
5.3.7 RRU3808 Technical Specifications
Modified carrier and bandwidth
specifications when an RRU3808 works in
LTE FDD mode.
All sections
Changed LTE to LTE FDD.
5.3 Technical Specifications of RRUs and
5.2 Technical Specifications of RFUs
Added hyperlinks for typical PA
configurations in the Output Power
columns.
3900 Series Base Station Power
Consumption Specifications
Changed the title to 3900 Series Base Station
Power Consumption Specifications.
5.3 Technical Specifications of RRUs
Added the following description in the
technical specifications of the RRU3628,
RRU3632, RRU3638, RRU3824, RRU3826,
RRU3828, RRU3829, RRU3832, RRU3838,
RRU3839, RRU3926, RRU3928, RRU3929,
RRU3936, RRU3938, RRU3939, and
RRU3942: An Outdoor Power Module 15M
(OPM15M) can be used to provide AC power
supply for these RF modules. For details
about the OPM15M, see OPM15M User
Guide.
5.2.3 WRFU Technical Specifications
Added specifications for the 80 W WRFU
(Optimized).
5.2.12 MRFUd Technical Specifications,
5.2.13 MRFUe Technical Specifications,
5.3.32 RRU3926 Technical Specifications,
5.3.34 RRU3929 Technical Specifications,
5.3.35 RRU3936 Technical Specifications,
5.3.38 RRU3942 Technical Specifications,
and 5.3.39 RRU3961 Technical
Specifications
Modified LTE FDD bandwidth
specifications.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
3900 Series Base Station
Technical Description
1 Changes in the 3900 Series Base Station Technical
Description
Topic
Change Description
5.3.18 RRU3220 Technical Specifications
Modified tower-mounted amplifier (TMA)
support capabilities.
5.3.25 RRU3268 Technical Specifications
l Added specifications for the RRU3268
when it works in the 800 MHz frequency
band.
l Modified the receive and transmit
frequency band ranges for the RRU3268
when it works in band A of band 28 of the
700 MHz frequency band.
5.3.29 RRU3642 Technical Specifications
Modified the CPRI-based topology.
5.3.38 RRU3942 Technical Specifications
l Added specifications for the RRU3942
when it works in the 1,900 MHz frequency
band in GUL triple-mode.
l Modified LTE bandwidth specifications.
l Modified the table Output power for the
RRU3942 (GL MSR, 1900 MHz, 2x60
W).
l Added the table Output power for the
RRU3942 (GL MSR, 1900 MHz, 40 W
+80 W)
5.5 Engineering Specifications of Cabinets
Added the following description in the
storage standards for a cabinet: To avoid
product degradation, the cabinet should be
put into use, specifically within the first year
of storage.
Compared with Issue 07 (2013-08-29) of V100R008C00, this issue does not exclude any topics.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12
3900 Series Base Station
Technical Description
2 Network Architecture
2
Network Architecture
About This Chapter
Radio access network (RAN) consists of the RAN physical layer and RAN logical layer.
l
The RAN physical layer consists of physical devices in a base station and base station
controller. Base station devices communicate with base station controller devices through
the transport network.
l
The RAN logical layer consists of logical functions implemented on a base station and base
station controller. Base station logical functions communicate with base station controller
logical functions through interface protocols.
2.1 BTS in the RAN Physical Layer
The RAN physical layer consists of BTS nodes, BSC nodes, and the transport network that
connects BTS and BSC nodes.
2.2 BTS in the RAN Logical Layer
The RAN logical layer is classified into the GBSS, UTRAN, and E-UTRAN according to
protocols used by each network. The RAN logical layer consists of logical functions
implemented on base stations and base station controllers. Logical functions of base stations
include GBTS Service, NodeB Service, and eNodeB Service. Logical functions of base station
controllers include GBSC Service and RNC Service. GBSS is short for GSM base station system,
UTRAN is short for universal terrestrial radio access network, and E-UTRAN is short for
evolved universal terrestrial radio access network.
2.3 Mapping of a BTS in the RAN Physical Layer and RAN Logical Layer
The logical functions of a base station are deployed on physical devices. One physical device
can be deployed with one or several logical functions.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13
3900 Series Base Station
Technical Description
2 Network Architecture
2.1 BTS in the RAN Physical Layer
The RAN physical layer consists of BTS nodes, BSC nodes, and the transport network that
connects BTS and BSC nodes.
The following figure shows the position of BTS nodes in the RAN physical layer.
Figure 2-1 BTS nodes in the RAN physical layer
UE: user equipment
BTS Node: a physical base station BSC Node: a physical base station
controller
MME: mobility management entity S-GW: serving gateway
-
BTS Node: provides the infrastructure and application platform for a base station to deploy
GBTS Service, NodeB Service, and eNodeB Service. BTS nodes are classified into singlemodeand multi-mode base stations based on the types and quantity of services deployed.
BSC Node: provides GBSC Service or RNC Service.
Transport network: forwards data between BTS nodes and BSC nodes, between BTS nodes
and the operation and maintenance center (OMC). Multiple modes can share one transport
network or use an independent transport network.
The transmission scheme supported by each mode is as follows:
l
GSM: TDM and IP transmission
l
UMTS: ATM and IP transmission
l
LTE: IP transmission
For details about Abis transmission for GSM, see Abis Independent Transmission. For details
about ATM transmission, see ATM Transport. For details about IP transmission, see IP
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
3900 Series Base Station
Technical Description
2 Network Architecture
Transmission. For details about the networking where multiple modes share the transport
network, see Common Transmission.
NOTE
To obtain the preceding reference documents, choose 3900 Series Base Stations Product Documentation >
Descriptions > Function Description.
2.2 BTS in the RAN Logical Layer
The RAN logical layer is classified into the GBSS, UTRAN, and E-UTRAN according to
protocols used by each network. The RAN logical layer consists of logical functions
implemented on base stations and base station controllers. Logical functions of base stations
include GBTS Service, NodeB Service, and eNodeB Service. Logical functions of base station
controllers include GBSC Service and RNC Service. GBSS is short for GSM base station system,
UTRAN is short for universal terrestrial radio access network, and E-UTRAN is short for
evolved universal terrestrial radio access network.
GBTS Service in the GBSS Logical Network
The GBSS logical network consists of GBTS Service and GBSC Service. The following figure
shows the position of GBTS Service in the GBSS logical network.
Figure 2-2 GBTS Service in the GBSS logical network
MS: mobile station
GBTS Service: services provided by GSM base
stations
GBSC Service: services provided by GSM base station GBSS: GSM base station system
controllers
GBTS Service: performs logical functions of GSM base stations and is controlled by the GBSC
Service. These functions are radio channel management, physical layer protocol processing, and
signaling procedure processing. The GBTS Service communicates with the GBSC Service
through the Abis interface and communicates with the MS through the Um interface.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15
3900 Series Base Station
Technical Description
2 Network Architecture
GBSC Service: provides logical functions of GSM base station controllers. These functions are
radio resource management, base station management, mobility management, and access
control.
NodeB Service in the UTRAN Logical Network
The UTRAN logical network consists of NodeB Service and RNC Service. The following figure
shows the position of NodeB Service in the UTRAN logical network.
Figure 2-3 NodeB Service in the UTRAN logical network
UE: user equipment
NodeB Service: services provided by WCDMA base
stations
RNC Service: services provided by WCDMA base
station controllers
UTRAN: universal terrestrial radio access network
NodeB Service: performs logical functions of WCDMA base stations and is controlled by the
RNC Service. These functions are radio channel management, physical layer protocol
processing, and signaling procedure processing. The NodeB Service communicates with the
RNC Service through the Iub interface and communicates with the UE through the Uu interface.
RNC Service: performs logical functions of WCDMA base station controllers. These functions
are radio resource management, base station management, mobility management, and access
control. The RNC Service communicates with each other through the Iur interface.
eNodeB Service in the E-UTRAN Logical Network
The E-UTRAN logical network consists of the eNodeB Service. The following figure shows the
position of the eNodeB Service in the E-UTRAN logical network.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
16
3900 Series Base Station
Technical Description
2 Network Architecture
Figure 2-4 eNodeB Service in the E-UTRAN logical network
UE: user equipment
eNodeB Service: services provided by LTE base
stations
MME/S-GW: mobility management entity and serving E-UTRAN: evolved universal terrestrial radio access
gateway
network
eNodeB Service: performs logical functions of LTE base stations. These functions are radio
resource management, radio channel management, mobility management, physical layer
protocol processing, signaling procedure processing, and access control. The LTE FDD singlemode, LTE TDD single-mode, and LTE FDD and LTE TDD (LT) dual-mode are supported.
The eNodeB Service communicates with the MME/S-GW through the S1 interface,
communicates with other eNodeB Service through the X2 interface, and communicates with the
UE through the Uu interface.
2.3 Mapping of a BTS in the RAN Physical Layer and RAN
Logical Layer
The logical functions of a base station are deployed on physical devices. One physical device
can be deployed with one or several logical functions.
The following figure shows the mapping of a BTS in the RAN physical layer and RAN logical
layer.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
17
3900 Series Base Station
Technical Description
2 Network Architecture
Figure 2-5 Mapping of a BTS in the RAN physical layer and RAN logical layer
The red, green, and blue lines in the preceding figure indicate the deployment of services for
each base station on each BTS node. BTS nodes are classified into single-mode and multi-mode
base stations based on the types and quantity of deployed services.
l
BTS Node 1 is deployed with GBTS services only. Therefore, BTS Node 1 is a GSM-only
base station.
l
BTS Node 2 is deployed with NodeB and eNodeB services. Therefore, BTS Node 2 is a
UL dual-mode base station.
l
BTS Node 3 is deployed with GBTS, NodeB, and eNodeB services. Therefore, BTS Node
3 is a GUL triple-mode base station.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
18
3900 Series Base Station
Technical Description
3 Logical Structure
3
Logical Structure
About This Chapter
This section describes the logical structure of 3900 series base stations in terms of subsystems
and functional structures.
3.1 BTS Subsystems
The BTS subsystems include the control subsystem, transport subsystem, baseband subsystem,
radio frequency (RF) subsystem, clock subsystem, and power and environment monitoring
subsystem.
3.2 BTS Functional Structure
BTS functional structure consists of BTS nodes, GBTS Service, NodeB Service, and eNodeB
Service.
3.3 Deployment of 3900 Series Base Stations
3900 series base stations can be deployed as separate-MPT or co-MPT base stations.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
19
3900 Series Base Station
Technical Description
3 Logical Structure
3.1 BTS Subsystems
The BTS subsystems include the control subsystem, transport subsystem, baseband subsystem,
radio frequency (RF) subsystem, clock subsystem, and power and environment monitoring
subsystem.
The following figure shows the BTS subsystems.
Figure 3-1 BTS subsystems
BTS CTL subsystem: BTS control BTS TRP subsystem: BTS transport BTS BB subsystem: BTS baseband
subsystem
subsystem
subsystem
BTS RF subsystem: BTS radio
frequency subsystem
BTS TAS subsystem: BTS clock
subsystem
BTS MPE subsystem: BTS power
and environment monitoring
subsystem
BTS CTL subsystem: controls and manages resources in a base station. This subsystem
provides the management plane interface between the base station and the OMC, the control
plane interface between the base station and other NEs, and the interface for controlling and
negotiating common devices in a multimode base station.
BTS TRP subsystem: forwards data between the transport network and the base station. This
subsystem provides physical ports between the base station and the transport network, and the
user plane interface between the base station and other NEs.
BTS BB subsystem: processes uplink and downlink baseband data. The UMTS mode supports
the baseband resource pool. For details, see NodeB Baseband Resource Management.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
20
3900 Series Base Station
Technical Description
3 Logical Structure
BTS RF subsystem: receives and transmits radio signals. This subsystem provides ports to
connect the base station and antenna system. The baseband subsystem is connected to the RF
subsystem through CPRI ports. CPRI links support the star, chain, ring, and dual-star topologies.
For details, see RF Unit and Topology Management.
BTS TAS subsystem: synchronizes the base station clock with external clock sources. This
subsystem provides ports to connect the base station clock to external clock sources. For details
about time management, see Time Management. Multiple modes can share one clock or use an
independent clock. For details about the synchronization modes supported by GSM, UMTS, and
LTE, see the corresponding Synchronization. For the clock synchronization mode of multimode
base station common clock, see Common Clock.
BTS MPE subsystem: provides power supply, dissipates heat, and monitors the environment
for a base station. This subsystem provides ports to connect the base station and site devices.
For details about power supply management, see Power Supply Management. For details about
environment monitoring management, see Monitoring Management.
NOTE
To obtain the preceding reference documents, choose 3900 Series Base Stations Product Documentation >
Descriptions > Function Description.
3.2 BTS Functional Structure
BTS functional structure consists of BTS nodes, GBTS Service, NodeB Service, and eNodeB
Service.
The following figure shows the functional structure of a BTS.
Figure 3-2 BTS functional structure
BTS nodes use abstract resources and a unified interface design. In this case, software and
hardware differences are shielded and each Service can be flexibly deployed on each type of
resources. As a result, resources can be flexibly shared and allocated among each type of Service.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
21
3900 Series Base Station
Technical Description
3 Logical Structure
BTS Node: for details about the functions of a BTS node, see 2.1 BTS in the RAN Physical
Layer.
GBTS Service, NodeB Service, and eNodeB Service: for details about the functions of GBTS
Service, NodeB Service, and eNodeB Service, see 2.2 BTS in the RAN Logical Layer.
Itf_Platform-Service: service control interface provided by BTS nodes, including the service
deployment interface, version upgrade interface, starting and restarting interface, and status
monitoring interface.
Itf_Node-RAT: interface provided by BTS nodes to control the common resources in a base
station, including resource application, releasing, activation, and reconfiguration interfaces.
Common resources in a base station include transmission resources, carrier resource, and
universal resources such as SCTP links, RF TX and RX channels, and CPU progress. SCTP is
short for Signaling Control Transmission Protocol.
3.3 Deployment of 3900 Series Base Stations
3900 series base stations can be deployed as separate-MPT or co-MPT base stations.
3.3.1 Co-MPT Base Stations
In a co-MPT 3900 series base station, all the services are deployed on one BTS node and managed
by the operation and maintenance center (OMC) through one O&M channel.
The following figure shows a 3900 series base station with co-MPT.
Figure 3-3 3900 series base stations with co-MPT
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
22
3900 Series Base Station
Technical Description
3 Logical Structure
In a co-MPT base station, the BTS node manages the software and hardware platforms.
Resources can be shared or used independently for each Service to achieve flexible resource
scheduling and allocation. This facilitates the evolution of multimode base stations.
In a co-MPT base station, different modes can be flexibly combined to implement GSM, UMTS,
LTE FDD, and LTE TDD single-mode base stations, GU, GL, and UL dual-mode base stations,
GUL triple-mode base stations, and GULT four-mode base stations.
NOTICE
If operations that affect services are performed on the shared resources, services of modes that
share these resources will be affected. These operations include parameter adjustments, resets,
board additions and removals, power-off, blocking, loopbacks, offline tests, offline performance
tests, and software upgrades and rollbacks.
3.3.2 Separate-MPT Base Stations
In a separate-MPT 3900 series base station, services of each mode are deployed on its own BTS
node and managed by the operation and maintenance center (OMC) through its own O&M
channel.
The following figure shows a 3900 series base station with separate-MPT.
Figure 3-4 3900 series base station with separate-MPT
3900 GSM: 3900 series base stations
deployed only with GBTS Service
3900 WCDMA: 3900 series base stations
deployed only with NodeB Service
3900 LTE: 3900 series base stations deployed —
only with eNodeB Service
In a separate-MPT base station, each mode has an independent software platform and an
independent hardware platform. However, these modes can still share part of the resources, such
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
23
3900 Series Base Station
Technical Description
3 Logical Structure
as site devices, cabinets, the BBU, transmission resources, clocks, RF modules, and the antenna
system. The more the resources are shared, the more each Service depends on each other. The
less the resources are shared, the less each Service depends on each other. The BTS nodes
communicate with each other through the Itf_RBS_MRI interface to negotiate how to allocate
shared resources and prevent resource conflicts.
In a separate-MPT base station, the four modes can be flexibly combined to implement GSM,
UMTS, LTE FDD, and LTE TDD single-mode base stations, GU, GL, and UL dual-mode base
stations, GUL triple-mode base stations, and GULT four-mode base stations.
Different Deployment of GBTS Service
GBTS Service can be deployed in two ways: 3900 GSM and 3900 (Co-MPT). The following
figure shows the differences between 3900 GSM and 3900 (Co-MPT).
Figure 3-5 Differences between 3900 GSM and 3900 (Co-MPT)
3900 GSM: The base stations are managed by the OMC through the O&M interface on the BSC.
The BSC together with the base stations under this BSC are displayed as an independent NE on
the OMC interface. The base stations are not independent NEs.
3900 (Co-MPT): The base stations are directly managed by the OMC and function as
independent NEs. The base stations now independently manage changes in product forms,
hardware configuration, networking capability and specifications of RF modules. Moreover,
GSM, UMTS, and LTE base stations have unified O&M methods. This facilitates the evolution
of multimode base stations.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
24
3900 Series Base Station
Technical Description
3 Logical Structure
Special Type of Separate-MPT 3900 Series Base Stations
If UMTS and LTE services are to be deployed in a 3900 GSM base station, the following special
type of separate-MPT base stations can be used to achieve high service integration through coMPT without changing the existing base stations.
Figure 3-6 Special type of separate-MPT 3900 series base stations
Management Method of Shared Resources
In a separate-MPT multimode base station where multiple modes share resources, the shared
resources must be managed.
There are two methods of managing the shared resources:
l
Unilateral management: The shared resources are managed by only one mode.
l
Multilateral management: The shared resources are collectively managed by multiple
modes.
NOTICE
If operations that affect services are performed on the shared resources, services of modes that
share these resources will be affected. These operations include parameter adjustments, resets,
board additions and removals, power-off, blocking, loopbacks, offline tests, offline performance
tests, and software upgrades and rollbacks.
The following table lists differences between unilateral management and multilateral
management.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
25
3900 Series Base Station
Technical Description
3 Logical Structure
Table 3-1 Differences between unilateral management and multilateral management
Function
Unilateral Management
Multilateral Management
Configuration
management
Only one mode is configured with
resource sharing parameters.
Other modes can use the shared
resources without being
configured.
Multiple modes are configured with
resource sharing parameters and these
parameters must have consistent
configurations to prevent resource
conflicts. The multi-node OMC
configuration tool can automatically
associate with the shared resources to
ensure consistent parameter
configuration.
Fault
management
Only one mode reports, locates,
and clears alarms related to the
shared resources. Other modes
report alarms related to resources
that depend on the shared
resources.
Multiple modes report alarms related
to the shared resources. On the multinode OMC alarm management tool,
the O&M personnel can specify a mode
to locate and clear the reported alarms
while alarms reported by other modes
are shielded.
Performance
management
Only one mode reports
performance measurement results
of the shared resources.
Multiple modes report performance
measurement results of the shared
resources.
Software
management
Only one mode manages the
resource sharing software.
Multiple modes manage the resource
sharing software. The O&M personnel
can grant loading control rights to one
mode to perform software upgrades
and rollback. Loading control rights
can be automatically configured by the
multi-node OMC software
management tool if the base station
uses Huawei standard version
mapping. Loading control rights must
be manually configured if the base
station uses non-standard Huawei
version mapping.
Inventory
management
Only one mode reports the
inventory information about the
shared resources.
Multiple modes report the inventory
information about the shared
resources. The multi-node OMC
software management tool can
automatically associate with the
inventory information about the shared
resources.
When unilateral management is used, the user can specify a mode to manage the shared resources
based on site situations. For example:
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
26
3900 Series Base Station
Technical Description
3 Logical Structure
l
Newly deployed base stations: GSM has the highest management priority, UMTS has the
medium management priority, and LTE has the lowest management priority. For example,
in a GU base station, it is recommended that GSM manage the shared resources.
l
Capacity expansion: The existing mode manages the shared resources. For example, during
an evolution from GSM to GU, it is recommended that GSM manage the shared resources.
The management method varies according to different types of shared resources. The following
table lists the management method for different types of shared resources.
Table 3-2 Method for managing different types of shared resources
Shared
Resources
Management Method
Site devices
Unilateral management: Site devices are managed by one mode in the
BBU to which the site devices are connected
Cabinets
Unilateral management: If a cabinet is connected to a BBU, the
monitoring system of this cabinet is monitored by one mode in this BBU.
The monitoring system includes the power monitoring unit (PMU),
temperature control unit (TCU), cabinet control unit (CCU), fan
monitoring unit (FMU), and environment monitoring unit (EMU). If a
cabinet is connected to a BBU through the radio remote units (RRUs), the
monitoring system of this cabinet is managed by one mode the RRUs
serve.
NOTE
l When monitoring boards are managed by only one mode, the following
functions cannot be enabled: Energy Saving, Smart TRX, and controlling fan
speed by the main control board.
l The CCU can only be managed by one mode.
BBU3900
subrack
Multilateral management: The UPEU, UEIU, and FAN are managed
collectively by all modes in the BBU. UPEU is short for universal power
and environment interface unit. The UEIU is short for universal
environment interface unit.
Multimode RF
modules
Multilateral management: Multimode RF modules are managed by the
modes that the multimode RF modules serve.
For example, a multimode RF module working in GU mode is managed
collectively by a GBTS and a NodeB.
Issue 05 (2014-08-30)
ALD
Unilateral management: The ALD is managed by one mode whose RF
modules are connected to the ALD. ALD is short for antenna line device.
BBU
interconnection
module
Unilateral management: BBU interconnection modules are managed by
one mode that shares one BBU with this BBU interconnection module
Transmission
resources
Unilateral management: When multiple modes share the transmission
ports and bandwidth, the transmission ports and the board that provides
transmission ports are managed by one mode in the BBU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27
3900 Series Base Station
Technical Description
3 Logical Structure
Shared
Resources
Management Method
Clock
Unilateral management: When multiple modes share one external clock
source, the clock source is managed by one mode in the BBU.
CPRI links
Unilateral management: When multiple modes share a CPRI link, the
CPRI link is managed by the mode whose baseband board provides CPRI
ports.
3.3.3 Different Functions with Different Deployment Methods
To meet the requirements of different application scenarios and promote the competitiveness of
Huawei base station products, Huawei 3900 series base stations can implement different
functions if deployed in different ways.
The following table lists different functions implemented by separate-MPT and co-MPT base
stations.
Function
Issue 05 (2014-08-30)
Separate-MPT
Co-MPT
(GSM,
UMTS,
LTE, GU,
GL, UL,
and
GUL)
3900 GSM
3900
WCDM
A
3900 LTE
Multimo
de (GU,
GL, UL,
and
GUL)
Clock over IP
(using Huawei
proprietary
protocols)
Not supported
Supported
Supported
Cannot be
shared
Supported
RGPS
clock
synchronization
Not supported
Not
supported
Supported
Cannot be
shared
Supported
1PPS+TOD
clock
synchronization
Not supported
Not
supported
Supported
Cannot be
shared
Supported
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
28
3900 Series Base Station
Technical Description
3 Logical Structure
Function
Separate-MPT
E1/T1
transmission
ports
Co-MPT
(GSM,
UMTS,
LTE, GU,
GL, UL,
and
GUL)
3900 GSM
3900
WCDM
A
3900 LTE
Multimo
de (GU,
GL, UL,
and
GUL)
TDM/IP
ATM/IP
IP
Can
be
shared
ATM/IP
NOTE
The
UMTS
mode
supports
the ATM
and
IP
transmiss
ion
schemes.
The GSM
and LTE
support
the
IP
transmiss
ion
scheme.
Supported
Supported
Supported
Cannot be
shared
Supported
CPRI
loadsharing topology
Not supported
Not
supported
Supported
Cannot be
shared
Supported
CPRI dual-star
topology
Not supported
Not
supported
Not
supported
Can
be
shared
Not
supported
CPRI MUX
Not supported
Not
supported
Not
supported
Can
be
shared
Supported
CPRI
topology
ring
NOTE
l In the Multimode (GU, GL, UL, and GUL) column, Can be shared means that multiple modes can either
share or not share this function. In this case, multiple modes must interoperate with each other to implement
this function. For details, see Management Method of Shared Resources. Cannot be shared means that
multiple modes cannot share this function. In this case, this function can be deployed and enabled
independently for each mode.
l The CPRI dual-star topology applies only to a separate-MPT multimode (GU, GL, UL, and GUL) base
station.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
29
3900 Series Base Station
Technical Description
4 Physical Devices
4
Physical Devices
About This Chapter
3900 series base stations adopt a module design, which consists of three modules: the BBU3900,
RF modules and cabinets that work with the BBU3900 and RF modules. The BBU3900 and RF
modules can be combined with different types of cabinets to adapt to different application
scenarios and meet user's requirements for fast and cost-effective network deployment.
4.1 Cabinets
Based on the application scenarios and cabinets installed, 3900 series base stations can be
classified into indoor macro base stations (BTS3900 and BTS3900L), outdoor macro base
stations (BTS3900A and BTS3900AL), distributed base stations (DBS3900), and mini base
stations (BTS3900C).
4.2 BBU
The BBU is a baseband processing unit and centrally manages the entire base station.
4.3 RF Module
RF modules modulate and demodulate baseband and RF signals, process data, amplify power
for signals, and conduct voltage standing wave ratio (VSWR) tests.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30
3900 Series Base Station
Technical Description
4 Physical Devices
4.1 Cabinets
Based on the application scenarios and cabinets installed, 3900 series base stations can be
classified into indoor macro base stations (BTS3900 and BTS3900L), outdoor macro base
stations (BTS3900A and BTS3900AL), distributed base stations (DBS3900), and mini base
stations (BTS3900C).
The following figure shows the 3900 series base station product family.
Figure 4-1 3900 series base station product family
BTS3900: uses BTS3900 (Ver.B), BTS3900 (Ver.C), or BTS3900 (Ver.D) cabinets.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31
3900 Series Base Station
Technical Description
4 Physical Devices
BTS3900L: uses a BTS3900L (Ver.B), BTS3900L (Ver.C), or BTS3900L (Ver.D) cabinet.
BTS3900A: uses BTS3900A (Ver.B), BTS3900 (Ver.C), or BTS3900A (Ver.D) cabinets.
BTS3900AL: uses a BTS3900AL (Ver.A) cabinet.
DBS3900: uses APM series cabinets, TMC series cabinets, battery cabinets, OMB, OMB
(Ver.C), IMB03, IFS06, or IBC10. APM is short for advanced power module, TMC is short for
transmission cabinet, OMB is short for outdoor mini box, IMB is short for indoor mini box, IFS
is short for indoor floor installation support, and IBC is short for indoor BBU cabinet.
BTS3900C: consists of an RRU subrack and an OMB.
For detailed information about each type of cabinet, see 3900 Series Base Station Hardware
Description.
4.2 BBU
The BBU is a baseband processing unit and centrally manages the entire base station.
The BBU provides the following functions:
l
Manages the entire base station system in terms of operation, maintenance, signaling
processing, and system clock.
l
Processes uplink and downlink data, and provides common public radio interfaces (CPRIs)
for the communication between the BBU and RF modules.
l
Provides physical ports for information exchange between the base station and the transport
network.
l
Provides an OM channel between the base station and the operation and maintenance center
(OMC).
l
Provides ports for receiving and transmitting signals from environment monitoring devices.
BBUs are classified into two types: BBU3900 and BBU3910. With a case structure, BBUs can
house different types of boards and modules. For configuration principles and functions of
boards and modules in a BBU, see BBU Hardware Description, which also provide information
about ports, indicators, and DIP switches on these boards and modules. For technical
specifications of a BBU, see 5.1 Technical Specifications of the BBU.
A multi-mode base station can be implemented through BBU interconnection. For details about
BBU interconnection, see BBU Interconnection Feature Parameter Description. (To obtain this
document, choose 3900 Series Base Stations Product Documentation > Descriptions > Function
Description).
4.3 RF Module
RF modules modulate and demodulate baseband and RF signals, process data, amplify power
for signals, and conduct voltage standing wave ratio (VSWR) tests.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
32
3900 Series Base Station
Technical Description
4 Physical Devices
4.3.1 RFU
Radio frequency units (RFUs) perform modulation, demodulation, data processing and power
amplification of RF and baseband signals, and conduct voltage standing wave ratio (VSWR)
detection.
Type
The following table lists RFU types.
Table 4-1 RFU types
Issue 05 (2014-08-30)
Module
Applicable Mode
Technical specifications
DRFU
GSM
5.2.1 DRFU Technical
Specifications
GRFU
GSM
5.2.2 GRFU Technical
Specifications
WRFU
UMTS
5.2.3 WRFU Technical
Specifications
WRFUa
UMTS
5.2.4 WRFUa Technical
Specifications
WRFUd
UMTS
5.2.5 WRFUd Technical
Specifications
WRFUe
UMTS
5.2.6 WRFUe Technical
Specifications
CRFUd
LTE
5.2.7 CRFUd Technical
Specifications
CRFUe
LTE
5.2.8 CRFUe Technical
Specifications
LRFU
LTE
5.2.9 LRFU Technical
Specifications
LRFUe
LTE
5.2.10 LRFUe Technical
Specifications
MRFU
GSM, UMTS, LTE, GU, and GL
5.2.11 MRFU Technical
Specifications
MRFUd
GSM, UMTS, LTE, GU, and GL
5.2.12 MRFUd Technical
Specifications
MRFUe
GSM, UMTS, LTE, GU, and GL
5.2.13 MRFUe Technical
Specifications
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33
3900 Series Base Station
Technical Description
4 Physical Devices
For information about the functions and the logical structure of an RFU, see RFU Hardware
Description. This document also provides details about ports and indicators on the RFU.
Cabinets That Can Work with RFUs
Restrictions on using RFUs together with cabinets are as follows:
l
The WRFUd, WRFUe, CRFUd, CRFUe, LRFUe, MRFUd, and MRFUe must be used
together with Ver.C cabinets, Ver.D cabinets, and BTS3900AL (Ver.A) cabinets.
l
For other types of RFUs, there are no restrictions on which types of base stations can be
used with.
4.3.2 RRU
Remote radio units (RRUs) perform modulation, demodulation, data processing, and power
amplification of baseband and radio frequency (RF) signals, and conduct voltage standing wave
ratio (VSWR) detection.
Type
The following table lists RRU types.
Table 4-2 RRU types
Issue 05 (2014-08-30)
Module
Applicable Mode
Technical specifications
RRU3004
GSM
5.3.1 RRU3004 Technical
Specifications
RRU3008
GSM
5.3.2 RRU3008 Technical
Specifications
RRU3801E
UMTS
5.3.3 RRU3801E Technical
Specifications
RRU3804
UMTS
5.3.4 RRU3804 Technical
Specifications
RRU3805
UMTS
5.3.5 RRU3805 Technical
Specifications
RRU3806
UMTS
5.3.6 RRU3806 Technical
Specifications
RRU3808
UMTS, LTE FDD, and UL
5.3.7 RRU3808 Technical
Specifications
RRU3821E
UMTS, LTE FDD, and UL
5.3.8 RRU3821E Technical
Specifications
RRU3824
UMTS
5.3.9 RRU3824 Technical
Specifications
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
3900 Series Base Station
Technical Description
Issue 05 (2014-08-30)
4 Physical Devices
Module
Applicable Mode
Technical specifications
RRU3826
UMTS
5.3.10 RRU3826 Technical
Specifications
RRU3828
UMTS
5.3.11 RRU3828 Technical
Specifications
RRU3829
UMTS
5.3.12 RRU3829 Technical
Specifications
RRU3832
UMTS, LTE FDD, and UL
5.3.13 RRU3832 Technical
Specifications
RRU3838
UMTS
5.3.14 RRU3838 Technical
Specifications
RRU3839
UMTS
5.3.15 RRU3839 Technical
Specifications
RRU3201
LTE FDD
5.3.16 RRU3201 Technical
Specifications
RRU3203
LTE FDD
5.3.17 RRU3203 Technical
Specifications
RRU3220
LTE FDD
5.3.18 RRU3220 Technical
Specifications
RRU3221
LTE FDD
5.3.19 RRU3221 Technical
Specifications
RRU3222
LTE FDD
5.3.20 RRU3222 Technical
Specifications
RRU3229
LTE FDD
5.3.21 RRU3229 Technical
Specifications
RRU3240
LTE FDD
5.3.22 RRU3240 Technical
Specifications
RRU3260
LTE FDD
5.3.23 RRU3260 Technical
Specifications
RRU3268
LTE FDD
5.3.25 RRU3268 Technical
Specifications
RRU3628
LTE FDD
5.3.26 RRU3628 Technical
Specifications
RRU3632
LTE FDD
5.3.27 RRU3632 Technical
Specifications
RRU3638
LTE FDD
5.3.28 RRU3638 Technical
Specifications
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35
3900 Series Base Station
Technical Description
Issue 05 (2014-08-30)
4 Physical Devices
Module
Applicable Mode
Technical specifications
RRU3642
LTE FDD
5.3.29 RRU3642 Technical
Specifications
RRU3841
LTE FDD
5.3.30 RRU3841 Technical
Specifications
RRU3908
GSM, UMTS, LTE FDD, GU, and
GL
5.3.31 RRU3908 Technical
Specifications
RRU3926
GSM, UMTS, LTE FDD, GU, and
GL
5.3.32 RRU3926 Technical
Specifications
RRU3928
GSM, UMTS, LTE FDD, GU, and
GL
5.3.33 RRU3928 Technical
Specifications
RRU3929
GSM, UMTS, LTE FDD, GU, and
GL
5.3.34 RRU3929 Technical
Specifications
RRU3936
GSM, UMTS, LTE FDD, GU, and
GL
5.3.35 RRU3936 Technical
Specifications
RRU3938
GSM, UMTS, LTE FDD, GU, and
GL
5.3.36 RRU3938 Technical
Specifications
RRU3939
GSM, LTE FDD, and GL
5.3.37 RRU3939 Technical
Specifications
RRU3942
GSM, UMTS, LTE FDD, GU, GL,
GUL, and UL
5.3.38 RRU3942 Technical
Specifications
RRU3961
GSM, UMTS, LTE FDD, GU, GL,
UL, and GUL
5.3.39 RRU3961 Technical
Specifications
RRU3232
LTE TDD
5.3.40 RRU3232 Technical
Specifications
RRU3251
LTE TDD
5.3.41 RRU3251 Technical
Specifications
RRU3252
LTE TDD
5.3.42 RRU3252 Technical
Specifications
RRU3253
LTE TDD
5.3.43 RRU3253 Technical
Specifications
RRU3256
LTE TDD
5.3.44 RRU3256 Technical
Specifications
RRU3259
LTE TDD
5.3.45 RRU3259 Technical
Specifications
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
36
3900 Series Base Station
Technical Description
4 Physical Devices
For information about the functions and the logical structure of an RRU, see RRU hardware
description of the RRU type in question. This document also provides details about ports and
indicators on the RRU.
Cabinets That Can Work with RRUs
Restrictions on using RRUs together with cabinets are as follows:
l
The RRU3229, RRU3841, RRU3929, RRU3829, RRU3942, and RRU3961 must be used
with Ver.C and Ver.D cabinets.
l
For other types of RRUs, there are no restrictions on which types of cabinets can be used
with.
4.3.3 AAU
The AAU incorporates the functions of radio frequency (RF) modules and antenna systems.
Type
The following table lists AAU types.
Table 4-3 AAU types
Module
Applicable Mode
Technical specifications
AAU3910
l RU3832: UMTS, LTE FDD,
and UL
5.4.2 AAU3910 Technical
Specifications
l RU3268: LTE FDD
l RU3260: LTE FDD
l RU3938: GSM, UMTS, LTE
FDD, GU, and GL
AAU3902
UMTS, LTE FDD, and GL
5.4.1 AAU3902 Technical
Specifications
For information about the functions and logical structure of an AAU3910, see AAU3910
Hardware Description. This document also provides details about ports and indicators on the
AAU3910. For information about the functions and logical structure of an AAU3902, see
AAU3902 Hardware Descripiton. This document also provides details about ports and indicators
on the AAU3902.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
37
3900 Series Base Station
Technical Description
5 Product Specifications
5
Product Specifications
About This Chapter
Product specifications of the 3900 series base stations include technical specifications of the
BBU and radio frequency (RF) modules, and engineering specifications of each type of cabinet.
5.1 Technical Specifications of the BBU
This section describes the technical specifications of the BBU, including capacity specifications,
baseband specifications, signaling specifications, CPRI specifications, transmission port
specifications, and engineering specifications.
5.2 Technical Specifications of RFUs
This section describes the technical specifications of radio frequency units (RFUs), including
supported modes, frequency bands, RF specifications, surge protection specifications,
specifications of CPRI ports, and antenna capabilities.
5.3 Technical Specifications of RRUs
This section provides technical specifications of RRUs, including supported modes, frequency
bands, RF specifications, engineering specifications, specifications of CPRI ports, and antenna
capabilities.
5.4 Technical Specifications of AAUs
This section provides technical specifications of AAUs, including supported modes, frequency
bands, RF and antenna specifications, engineering specifications, antenna capabilities,
specifications of CPRI ports, and electrical specifications.
5.5 Engineering Specifications of Cabinets
This section describes engineering specifications of each type of cabinet, including input power
specifications, equipment specifications, environment specifications, surge protection
specifications, and standards that have been complied with.
../../mbts/tech-desc/power-consumption-sran9c00.xls
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
38
3900 Series Base Station
Technical Description
5 Product Specifications
5.1 Technical Specifications of the BBU
This section describes the technical specifications of the BBU, including capacity specifications,
baseband specifications, signaling specifications, CPRI specifications, transmission port
specifications, and engineering specifications.
5.1.1 Capacity Specifications
This section describes the capacity specifications of the 3900 series base stations working in
different modes.
The following tables list the capacity specifications of the 3900 series base stations working in
single mode.
Table 5-1 Capacity specifications of the 3900 series base stations working in GSM mode
Mod
e
Board Configuration
GSM
GTMU
Capacity
TDM transmission:
l When GSM baseband
signals are processed
by RF modules: 1
GTMUb + 1 UTRPb4
+ 1 UBRIb (optional)
l When GSM baseband
signals are processed
by UBBPd boards:
1 GTMUb + 3
UBBPd1/UBBPd2/
UBBPd3/UBBPd4
or
1 GTMUb + 1
UBBPd1/UBBPd2/
UBBPd3/UBBPd4 + 1
UBBPd6
IP transmission: 1
GTMUb+1 UBRIb
(optional)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A single site supports a
maximum of 32 cells, and
each cell supports a
maximum of 24 TRXs.
l TDM transmission:
– When GSM
baseband signals
are processed by
RF modules: 126
TRXs
– When GSM
baseband signals
are processed by
UBBPd boards: 72
TRXs
l IP over FE
transmission: 60 TRXs
l IP over E1
transmission: 48 TRXs
39
3900 Series Base Station
Technical Description
Mod
e
5 Product Specifications
Board Configuration
UMPT
Capacity
1 UMPT+2 UBRIb boards
A single site supports a
maximum of 12 cells, and
each cell supports a
maximum of 24 TRXs.
l IP over FE
transmission: 72 TRXs
l IP over E1
transmission: 48 TRXs
Table 5-2 Capacity specifications of the 3900 series base stations working in UMTS mode
Mod
e
Board Configuration
Capacity
UMT
S
BBU3900
A single site supports a maximum of 24
cells.
1 UMPT + 6 UBBPd5
boards
l Uplink: 6144 CEs
l Downlink: 6144 CEs
BBU3910
1 UMPT + 6 UBBPd6
boards
A single site supports a maximum of 48
cells.
l Uplink: 6144 CEs
l Downlink: 6144 CEs
Table 5-3 Capacity specifications of the 3900 series base stations working in LTE FDD mode
Mod
e
Item
Specifications
LTE
FDD
Maximum number of cells
per BBU
When configured with an
LMPT
18 cells (2T2R/2T4R/
4T4R, 20 MHz)
When configured with a
UMPT
36 cells (2T2R/2T4R, 20
MHz)
18 cells (4T4R, 20 MHz)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40
3900 Series Base Station
Technical Description
Mod
e
5 Product Specifications
Item
Specifications
The maximum throughput
per cell (bandwidth: 20
MHz)
LBBPc
l Downlink data rate at
the MAC layer: 150
Mbit/s (2 x 2 MIMO,
64 QAM)
l Uplink data rate at the
MAC layer: 70 Mbit/s
(2 x 4 MU-MIMO or 2
x 2 MU-MIMO, 16
QAM)
LBBPd/UBBPd
l Downlink data rate at
the MAC layer: 150
Mbit/s (2 x 2 MIMO,
64 QAM)
l Uplink data rate at the
MAC layer: 100 Mbit/
s (2 x 4 MU-MIMO or
2 x 2 MU-MIMO, 16
QAM)
Maximum throughput per
eNodeB FDD (packet
size: 550 bytes)
Maximum number of UEs
in RRC_CONNECTED
mode per eNodeB FDD
LMPT
The UL data rate at the
MAC layer is 300 Mbit/s,
and the DL data rate at the
MAC layer is 450 Mbit/s.
UMPT
The UL and DL data rate
at the MAC layer is 1500
M/bits.
When one LBBPc board is
configured
l 504 with 1.4 MHz
bandwidth
l 1080 with 3 MHz
bandwidth
l 1800 with 5 MHz/10
MHz/15 MHz/20 MHz
bandwidth
When three LBBPc boards
are configured
l 1512 with 1.4 MHz
bandwidth
l 3240 with 3 MHz
bandwidth
l 5400 with 5 MHz/10
MHz/15 MHz/20 MHz
bandwidth
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41
3900 Series Base Station
Technical Description
Mod
e
5 Product Specifications
Item
Specifications
When one LBBPd1/
LBBPd2/UBBPd3/
UBBPd4 board is
configured
l 504 with 1.4 MHz
bandwidth
l 1080 with 3 MHz
bandwidth
l 1800 with 5 MHz
bandwidth
l 3600 with 10 MHz/15
MHz/20 MHz
bandwidth
When three LBBPd1/
LBBPd2/UBBPd3/
UBBPd4 boards are
configured
l 1512 with 1.4 MHz
bandwidth
l 3240 with 3 MHz
bandwidth
l 5400 with 5 MHz
bandwidth
l 10800 with 10 MHz/15
MHz/20 MHz
bandwidth
When one LBBPd3/
UBBPd5/UBBPd6 board
is configured
l 1008 with 1.4 MHz
bandwidth
l 2160 with 3 MHz
bandwidth
l 3600 with 5 MHz/10
MHz/15 MHz/20 MHz
bandwidth
When three LBBPd3/
UBBPd5/UBBPd6 boards
are configured
l 3024 with 1.4 MHz
bandwidth
l 6480 with 3 MHz
bandwidth
l 10800 with 5 MHz/10
MHz/15 MHz/20 MHz
bandwidth
Maximum number of
concurrent Data Radio
Bearers (DRBs) per UE
Issue 05 (2014-08-30)
8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
42
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-4 Capacity specifications of the 3900 series base stations working in LTE TDD mode
Mod
e
Item
Specifications
LTE
TDD
Maximum number of cells
per eNodeB TDD
BBU3900: 24 cells; BBU3910: 36 cells
l 4T4R Beamforming: 10 MHz, 15 MHz, or 20 MHz
cell bandwidth
l DL 2x2 MIMO: 5 MHz, 10 MHz, 15 MHz, or 20
MHz cell bandwidth
NOTE
"DL mxn MIMO" indicates that an eNodeB TDD uses m TX
antenna ports and a UE uses n RX antennas.
Maximum throughput per
cell
l Downlink data rate at the MAC layer: 110 Mbit/s (20
MHz bandwidth, SA2 subframe configuration, DL
2x2 MIMO)
l Uplink data rate at the MAC layer: 56 Mbit/s (20
MHz bandwidth, SA1 subframe configuration, UL
2x4 MU-MIMO)
Maximum throughput per
eNodeB TDD (packet
size: 550 bytes)
Downlink and uplink data rate at the MAC layer: 1500
Mbit/s
Maximum number of UEs
in RRC_CONNECTED
mode per eNodeB TDD
When the LBBPc and one
LMPT are configured
5400
When the LBBPd2/
LBBPd4/UBBPd4/
UBBPd6 and one UMPT
are configured
10800
Maximum number of
concurrent Data Radio
Bearers (DRBs) per UE
8
The following tables list the capacity specifications of the 3900 series base stations working in
multimode.
NOTE
a:
If GSM is configured with 72 carriers (S24/24/24), each carrier can be configured with one Standalone
Dedicated Control CHannel (SDCCH) only; if GSM is configured with 24 carriers (S8/8/8), each carirer can be
configured three SDCCHs.
SA/A/A indicates that the GSM network is configured with three cells and each cell has A TRX
B x C indicates that the UMTS network is configured with B cells and each cell has C carrier.
D x E MHz indicates that the LTE network is configured with D cells and each cell is configured with E MHz
bandwidth.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
43
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-5 Capacity specifications of the 3900 series base stations working in multimode
Mode
Board Configuration
Capacity
GU
BBU3900
1 GTMU + 1 UMPT + 5
UBBPd6 boards
GSM S24/24/24 + UMTS 3x8
(uplink: 5120 CEs,downlink:
5120 CEs)
1 UMPT_GU + 5 UBBPd6
boards
GSM S24/24/24a + UMTS 3x8
(uplink: 5120 CEs,downlink:
5120 CEs)
1 GTMU + 1 UMPT + 5
UBBPd6 boards
GSM S24/24/24 + UMTS 3x16
(uplink: 5120 CEs,downlink:
5120 CEs)
1 UMPT_GU + 5 UBBPd6
boards
GSM S8/8/8 + UMTS 3x12
(uplink: 5120 CEs,downlink:
5120 CEs)
1 GTMU + 1 UMPT + 5
UBBPd6 boards
GSM S24/24/24 + LTE 30 cells
(2T2R, 20 MHz. The sum of
uplink and downlink data rates
for an eNodeB at the MAC
layer: 1500 Mbit/s)
1 UMPT_GL + 6 UBBPd6
boards
GSM S24/24/24a + LTE 36
cells (2T2R, The sum of uplink
and downlink data rates for an
eNodeB at the MAC layer:
1500 Mbit/s. 10800 UEs in
RRC connected mode with
10/15/20 MHz bandwidth)
1 UMPT + 3 UBBPd5_U
boards + 3 UBBPd5_L
boards
GSM S24/24/24a + UMTS 18
cells + LTE 18 cells(3 x (6 x 20
MHz), 2T2R, 10800 UEs in
RRC connected mode with
10/15/20 MHz bandwidth)
1 GTMU + 1 UMPT_UL
boards + 3 UBBPd6_U
boards + 2 UBBPd5_L
boards
GSM S24/24/24 + UMTS 18
cells + LTE 12 cells(2 x (6 x 20
MHz), 2T2R, 7200 UEs in RRC
connected mode with 10/15/20
MHz bandwidth)
1 WMPT + 1 UMPT_GL +
3 UBBPd5_U boards + 3
UBBPd5_L boards
GSM S24/24/24a + UMTS 18
cells (3 cells x 2 carriers + 3
cells x 4 carriers)+ LTE 18 cells
(3 x (6 x 20 MHz), 2T2R, 10800
UEs in RRC connected mode
with 10/15/20 MHz bandwidth)
BBU3910
GL
GUL
Issue 05 (2014-08-30)
BBU3900/
BBU3910
BBU3900
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
44
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Board Configuration
Capacity
BBU3910
1 UMPT + 3 UBBPd5_U
boards + 3 UBBPd5_L
boards
GSM S24/24/24a + UMTS 18
cells + LTE 18 cells(3 x (6 x 20
MHz), 2T2R, 10800 UEs in
RRC connected mode with
10/15/20 MHz bandwidth)
1 GTMU + 1 UMPT_UL
boards + 3 UBBPd6_U
boards + 2 UBBPd5_L
boards
GSM S24/24/24 + UMTS 36
cells + LTE 12 cells(2 x (6 x 20
MHz), 2T2R, 7200 UEs in RRC
connected mode with 10/15/20
MHz bandwidth)
5.1.2 Baseband Specifications
This section describes the baseband specifications of a 3900 series base station.
GSM Baseband Specifications
The following table lists the number of carriers supported by UBBP boards working in GSM
mode.
Table 5-6 Carrier specifications
Board
Number of 2R Carriers
Number of 4R Carriers
UBBPd1, UBBPd2,
UBBPd3, or UBBPd4
24
12
UBBPd5
36
18
UBBPd6
48
24
NodeB Baseband Specifications
The WBBP is classified into four types, as listed in Table 5-7.
NOTE
l The baseband processing board in slot 2 or slot 3 of a BBU3900 could transfer the received CPRI data
to other boards.
l There are two CE specifications for the WBBPd1, WBBPd2, WBBPf1, and WBBPf3 as controlled by
the license and parameters.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
45
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-7 Specifications of the WBBP
Board
Number
of Cells
Number
of UL
CEs
Number
of DL
CEs
Number
of
HSDPA
Codesa
Number
of
HSDPA
UEs
Number
of
HSUPA
UEs
WBBPa
3
128
256
3x15
96
60
WBBPb1
3
64
64
3x15
64
64
WBBPb2
3
128
128
3x15
128
96
WBBPb3
6
256
256
6x15
144
96
WBBPb4
6
384
384
6x15
144
96
WBBPd1
6
64
64
6x15
128
96
192
192
256
256
6x15
144
144
384
384
WBBPd2
6
WBBPd3
6
256
256
6x15
144
96
WBBPf1
6
64
128
6x15
144
144
192
256
WBBPf2
6
256
384
6x15
192
192
WBBPf3
6
256
384
6x15
256
256
384
512
512
768
6x15
384
384
WBBPf4
6
a: The number of HSDPA codes supported by the WBBPd1 is 6x15, in which 6 is the number
of cells and 15 is the number of HSDPA codes supported by each cell.
The following table lists the baseband specifications of a UBBP working in UMTS mode.
Table 5-8 Baseband specifications
Issue 05 (2014-08-30)
Board
Number
of Cells
Uplink
CE
Downlin
k CE
Number
of
HSDPA
Codes
Number
of
HSDPA
UEs
Number
of
HSUPA
UEs
UBBPd1
6
384
512
6x15
288
288
UBBPd2
6
512
768
6x15
384
384
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
46
3900 Series Base Station
Technical Description
5 Product Specifications
Board
Number
of Cells
Uplink
CE
Downlin
k CE
Number
of
HSDPA
Codes
Number
of
HSDPA
UEs
Number
of
HSUPA
UEs
UBBPd3
6
384
512
6x15
288
288
UBBPd4
6
512
768
6x15
384
384
UBBPd5
6
768
768
6x15
512
512
UBBPd6
12
1024
1024
12x15
768
768
eNodeB Baseband Specifications (Number of Cells Supported)
The following table lists the number of cells, bandwidth, and antenna configurations supported
by a single LBBP in LTE FDD scenarios.
Table 5-9 Specifications of the LBBP in LTE FDD scenarios
Board
Number of
Cells
Cell Bandwidth
Antenna Configuration
LBBPc
3
1.4 MHz, 3 MHz, 5 MHz, 10
MHz, 15 MHz, or 20 MHz
3x20 MHz 1T1R
3x20 MHz 1T2R
3x20 MHz 2T2R
LBBPd1
3
1.4 MHz, 3 MHz, 5 MHz, 10
MHz, 15 MHz, or 20 MHz
3x20 MHz 1T1R
3x20 MHz 1T2R
3x20 MHz 2T2R
LBBPd2
3
1.4 MHz, 3 MHz, 5 MHz, 10
MHz, 15 MHz, or 20 MHz
3x20 MHz 1T1R
3x20 MHz 1T2R
3x20 MHz 2T2R
3x20 MHz 2T4R
3x20 MHz 4T4R
LBBPd3
6
1.4 MHz, 3 MHz, 5 MHz, 10
MHz, 15 MHz, or 20 MHz
6x20 MHz 1T1R
6x20 MHz 1T2R
6x20 MHz 2T2Ra
a: When a CPRI fiber optic cable is between 20 km (12.43 mi) and 40 km (24.85 mi), the
LBBPd3 board supports the maximum configuration of 3x20 MHz 2T2R.
The following table lists the number of cells, bandwidth, and antenna configurations supported
by a single LBBP in LTE TDD scenarios.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
47
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-10 Specifications of the LBBP in LTE TDD scenarios
Board
Number of
Cells
Cell Bandwidth
Antenna Configuration
LBBPc
3
5 MHz, 10 MHz, or 20 MHz
1x20 MHz (4T4R)
3x10 MHz 2T2R
3x20 MHz 2T2R
3x10 MHz 4T4R
LBBPd2
LBBPd4
3
3
5 MHz, 10 MHz, 15 MHz, or
20 MHz
3x20 MHz 2T2R
10 MHz or 20 MHz
3x20 MHz 8T8R
3x20 MHz 4T4R
The following table lists the number of cells supported by a UBBP working in LTE FDD mode.
Table 5-11 Specifications of cells
Board
Number of Cells
Cell Bandwidth
Antenna
Configuration
UBBPd3
3
1.4 MHz, 3 MHz, 5
MHz, 10 MHz, 15
MHz, or 20 MHz
3x20 MHz 1T1R
1.4 MHz, 3 MHz, 5
MHz, 10 MHz, 15
MHz, or 20 MHz
3x20 MHz 1T1R
UBBPd4
3
3x20 MHz 1T2R
3x20 MHz 2T2R
3x20 MHz 1T2R
3x20 MHz 2T2R
3x20 MHz 2T4R
3x20 MHz 4T4R
UBBPd5
UBBPd6
6
6
1.4 MHz, 3 MHz, 5
MHz, 10 MHz, 15
MHz, or 20 MHz
6x20 MHz 1T1R
1.4 MHz, 3 MHz, 5
MHz, 10 MHz, 15
MHz, or 20 MHz
6x20 MHz 1T1R
6x20 MHz 1T2R
6x20 MHz 2T2R
6x20 MHz 1T2R
6x20 MHz 2T2R
6x20 MHz 2T4R
6x20 MHz 4T4R
The following table lists the number of cells supported by a UBBP working in LTE TDD mode.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-12 Specifications of cells
Board
Number of Cells
Cell Bandwidth
Antenna
Configuration
UBBPd4
3
5 MHz, 10 MHz, 15
MHz, or 20 MHz
3x20 MHz 2T2R
5 MHz, 10 MHz, 15
MHz, or 20 MHz
6x20 MHz 2T2R
10 MHz or 20 MHz
3x20 MHz 8T8R
UBBPd6
6
UBBPd9
3
3x20 MHz 4T4R
6x20 MHz 4T4R
eNodeB Baseband Specifications (Maximum Number of UEs in RRC_Connected
Mode)
The following table lists the maximum number of UEs in RRC_Connected mode supported by
an eNodeB FDD cell.
Table 5-13 Maximum number of UEs in RRC_Connected mode supported by an eNodeB FDD
cell
Cell Bandwidth
Maximum Number of
UEs in RRC_Connected
Mode per Cell
Maximum Number of
Synchronized UEs per
Cell
1.4 MHz
168
l LBBPc: 56
l LBBPd: 100
l UBBPd: 168
3 MHz
360
l LBBPc: 120
l LBBPd/UBBPd: 360
5 MHz
600
l LBBPc: 200
l LBBPd/UBBPd: 600
10 MHz
1200
l LBBPc: 400
l LBBPd/UBBPd: 1200
15 MHz
1200
l LBBPc: 400
l LBBPd/UBBPd: 1200
20 MHz
1200
l LBBPc: 400
l LBBPd/UBBPd: 1200
The following table lists the maximum number of UEs in RRC_Connected mode supported by
an eNodeB TDD cell.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
49
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-14 Maximum number of UEs in RRC_Connected mode supported by an eNodeB TDD
cell
Cell Bandwidth
Maximum Number of UEs in
RRC_Connected Mode per Cell
5 MHz
600
10 MHz
1200
15 MHz
1200
20 MHz
1200
The following table lists the maximum number of UEs in RRC connected mode supported by
the LMPT.
Table 5-15 Maximum number of UEs in RRC connected mode
Board
Maximum Number of UEs in RRC
Connected Mode
LMPT
5400
The following table lists the maximum number of UEs in RRC connected mode supported by
the UMPTa2, UMPTa6, UMPTb2, or UMPTb1 working in LTE mode.
Table 5-16 Maximum number of UEs in RRC connected mode
Board
Maximum Number of UEs in RRC
Connected Mode
UMPTa2, UMPTa6, UMPTb2, or UMPTb1
10800
The following table lists the maximum number of UEs in RRC connected mode supported by
LBBP boards in LTE FDD scenarios.
Table 5-17 Maximum number of UEs in RRC connected mode
Issue 05 (2014-08-30)
Board
Cell Bandwidth
Maximum Number
of UEs in RRC
Connected Mode
Maximum Number
of Synchronized UEs
LBBPc
1.4 MHz
504
168
3 MHz
1080
360
5 MHz
1800
600
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
50
3900 Series Base Station
Technical Description
Board
LBBPd1 or
LBBPd2
LBBPd3
5 Product Specifications
Cell Bandwidth
Maximum Number
of UEs in RRC
Connected Mode
Maximum Number
of Synchronized UEs
10 MHz
1800
600
15 MHz
1800 (in 2R mode) or
1200 (in 4R mode)
600 (2R) or 400 (4R)
20 MHz
1800 (in 2R mode) or
1200 (in 4R mode)
600 (2R) or 400 (4R)
1.4 MHz
504
300
3 MHz
1080
1080
5 MHz
1800
1800
10 MHz
3600
3600
15 MHz
3600
3600
20 MHz
3600
3600
1.4 MHz
1008
600
3 MHz
2160
2160
5 MHz
3600
3600
10 MHz
3600
3600
15 MHz
3600
3600
20 MHz
3600
3600
The following table lists the maximum number of UEs in RRC connected mode supported by
LBBP boards in LTE TDD scenarios.
Table 5-18 Maximum number of UEs in RRC connected mode
Board
Cell Bandwidth
Maximum Number of
UEs in RRC Connected
Mode
LBBPc
5 MHz
1800
10 MHz
1800
20 MHz
1800 (in 2R mode) or 1200
(in 4R mode)
5 MHz
1800
10 MHz, 15 MHz, or 20 MHz
3600
LBBPd2
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
51
3900 Series Base Station
Technical Description
5 Product Specifications
Board
Cell Bandwidth
Maximum Number of
UEs in RRC Connected
Mode
LBBPd4
10 MHz
3600
20 MHz
3600
The following table lists the maximum number of UEs in RRC_Connected mode supported by
a UBBP working in LTE FDD mode.
Table 5-19 Maximum number of UEs in RRC connected mode
Board
Cell Bandwidth
Maximum
Number of UEs in
RRC Connected
Mode
Maximum
Number of
Synchronized UEs
UBBPd3 or UBBPd4
1.4 MHz
504
504
3 MHz
1080
1080
5 MHz
1800
1800
10 MHz, 15 MHz, or
20 MHz
3600
3600
1.4 MHz
1008
1008
3 MHz
2160
2160
5 MHz, 10 MHz, 15
MHz, or 20 MHz
3600
3600
UBBPd5 or UBBPd6
The following table lists the maximum number of UEs in RRC_Connected mode supported by
a UBBP working in LTE TDD mode.
Table 5-20 Maximum number of UEs in RRC connected mode
Board
Cell Bandwidth
Maximum number of UEs
in RRC connected mode
UBBPd4, UBBPd6, or
UBBPd9
5 MHz
1800
10 MHz
3600
15 MHz
20 MHz
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
52
3900 Series Base Station
Technical Description
5 Product Specifications
The maximum number of UEs in RRC_Connected mode supported by an eNodeB can be
calculated using the following formula:
Maximum number of UEs in RRC_Connected mode supported by an eNodeB = Min
(Maximum number of UEs in RRC_Connected mode supported by the main control board,
∑Maximum number of UEs in RRC_Connected mode supported by BBP boards)
The main control board is the LMPT or UMPT and the BBP boards are the LBBP or UBBP
boards.
The following table lists the maximum number of UEs in RRC_Connected mode supported by
an eNodeB FDD when the typical board combination is used.
Table 5-21 Maximum number of UEs in RRC_Connected mode supported by an eNodeB FDD
Board
Combination
Cell Bandwidth
Maximum
Number of UEs in
RRC_Connected
Mode
Maximum
Number of
Synchronized UEs
1 UMPT+3 LBBPc
1.4 MHz
1512
504
3 MHz
3240
1080
5 MHz
5400
1800
10 MHz
5400
1800
15 MHz
5400
1800
20 MHz
5400
1800
1.4 MHz
5040
l LBBPd3: 3000
1 UMPT+5 LBBPd3/
UBBPd5
l UBBPd: 5040
3 MHz
10800
10800
5 MHz
10800
10800
10 MHz
10800
10800
15 MHz
10800
10800
20 MHz
10800
10800
The following table lists the maximum number of UEs in RRC_Connected mode supported by
an eNodeB TDD when the typical board combination is used.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-22 Maximum number of UEs in RRC_Connected mode supported by an eNodeB TDD
Board Combination
Cell Bandwidth
Maximum Number of
UEs in RRC_Connected
Mode
1 UMPT+3 LBBPc
5 MHz
5400
10 MHz
5400
15 MHz
5400 (2R)/3600 (4R)
20 MHz
5400 (2R)/3600 (4R)
5 MHz
10800
10 MHz
10800
15 MHz
10800
20 MHz
10800
1 UMPT+6 LBBPd2
eNodeB Baseband Specifications (Maximum Number of DRBs Supported)
The maximum number of data radio bearers (DRBs) per user is eight.
The maximum number of DRBs supported by an LMPT/LBBP/UMPT is three times the
maximum number of UEs in RRC_Connected mode supported.
The maximum number of DRBs supported by an eNodeB is 32,400.
eNodeB Baseband Specifications (Maximum Throughput)
The following table lists the maximum uplink and downlink cell and user throughput supported
by an eNodeB FDD.
Table 5-23 Maximum uplink and downlink cell and user throughput supported by an eNodeB
FDD
Item
Cell
Bandwidth
Specifications
Maximum
throughput per
cell
1.4 MHz
l DL cell MAC layer throughput: 8.7 Mbit/s (at
2x2 MIMO, 64QAM)
l UL cell MAC layer throughput: 6.4 Mbit/s (at
2x2 MU-MIMO, 16QAM)
l UL cell MAC layer throughput: 3.2 Mbit/s (at
1x4 SIMO, 16QAM)
l UL cell MAC layer throughput: 6.4 Mbit/s (at
2x4 MU-MIMO, 16QAM)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
54
3900 Series Base Station
Technical Description
Item
5 Product Specifications
Cell
Bandwidth
Specifications
3 MHz
l DL cell MAC layer throughput: 22 Mbit/s (at 2x2
MIMO, 64QAM)
l UL cell MAC layer throughput: 16 Mbit/s (at 2x2
MU-MIMO, 16QAM)
l UL cell MAC layer throughput: 8 Mbit/s (at 1x4
SIMO, 16QAM)
l UL cell MAC layer throughput: 16 Mbit/s (at 2x4
MU-MIMO, 16QAM)
5 MHz
l DL cell MAC layer throughput: 36 Mbit/s (at 2x2
MIMO, 64QAM)
l UL cell MAC layer throughput: 27 Mbit/s (at 2x2
MU-MIMO, 16QAM)
l UL cell MAC layer throughput: 13 Mbit/s (at 1x4
SIMO, 16QAM)
l UL cell MAC layer throughput: 27 Mbit/s (at 2x4
MU-MIMO, 16QAM)
10 MHz
l DL cell MAC layer throughput: 73 Mbit/s (at 2x2
MIMO, 64QAM)
l UL cell MAC layer throughput: 55 Mbit/s (at 2x2
MU-MIMO, 16QAM)
l UL cell MAC layer throughput: 27 Mbit/s (at 1x4
SIMO, 16QAM)
l UL cell MAC layer throughput: 55 Mbit/s (at 2x4
MU-MIMO, 16QAM)
15 MHz
l DL cell MAC layer throughput: 110 Mbit/s (at
2x2 MIMO, 64QAM)
l UL cell MAC layer throughput: 81 Mbit/s (at 2x2
MU-MIMO, 16QAM)
l UL cell MAC layer throughput: 40 Mbit/s (at 1x4
SIMO, 16QAM)
l UL cell MAC layer throughput: 81 Mbit/s (at 2x4
MU-MIMO, 16QAM)
20 MHz
l DL cell MAC layer throughput: 150 Mbit/s (at
2x2 MIMO, 64QAM)
l UL cell MAC layer throughput: 100 Mbit/s (at
2x2 MU-MIMO, 16QAM)
l UL cell MAC layer throughput: 55 Mbit/s (at 1x4
SIMO, 16QAM)
l UL cell MAC layer throughput: 100 Mbit/s (at
2x4 MU-MIMO, 16QAM)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
55
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Cell
Bandwidth
Specifications
Maximum
throughput per
user
1.4 MHz
l Single user DL MAC layer throughput: 8.7 Mbit/
s (at 2x2 MIMO, 64QAM)
l Single user UL MAC layer throughput: 3.2 Mbit/
s (at 1x2 SIMO/1x4 SIMO, 16QAM)
3 MHz
l Single user DL MAC layer throughput: 22 Mbit/
s (at 2x2 MIMO, 64QAM)
l Single user UL MAC layer throughput: 8 Mbit/
s (at 1x2 SIMO/1x4 SIMO, 16QAM)
5 MHz
l Single user DL MAC layer throughput: 36 Mbit/
s (at 2x2 MIMO, 64QAM)
l Single user UL MAC layer throughput: 13 Mbit/
s (at 1x2 SIMO/1x4 SIMO, 16QAM)
10 MHz
l Single user DL MAC layer throughput: 73 Mbit/
s (at 2x2 MIMO, 64QAM)
l Single user UL MAC layer throughput: 27 Mbit/
s (at 1x2 SIMO/1x4 SIMO, 16QAM)
15 MHz
l Single user DL MAC layer throughput: 110
Mbit/s (at 2x2 MIMO, 64QAM)
l Single user UL MAC layer throughput: 40 Mbit/
s (at 1x2 SIMO/1x4 SIMO, 16QAM)
20 MHz
l Single user DL MAC layer throughput: 150
Mbit/s (at 2x2 MIMO, 64QAM)
l Single user UL MAC layer throughput: 51 Mbit/
s (at 1x2 SIMO/1x4 SIMO, 16QAM)
The following table lists the maximum uplink and downlink cell and user throughput supported
by an eNodeB TDD.
Table 5-24 Maximum uplink and downlink cell and user throughput supported by an eNodeB
TDD
Item
Maximu
m
throughp
ut per cell
(MAC
Issue 05 (2014-08-30)
Cell
Bandw
idth
Transmit
and
Receive
Mode
Subframe
Ratio
SA0 (1:3)
20 MHz
2T2R
SA1 (2:2)
Multi-Antenna
Technique
Specifications
2x2 DL (MIMO)
50 Mbit/s
1x2 UL (SIMO)
31 Mbit/s
2x2 DL (MIMO)
80 Mbit/s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
56
3900 Series Base Station
Technical Description
Item
5 Product Specifications
Cell
Bandw
idth
Transmit
and
Receive
Mode
Subframe
Ratio
SA2 (3:1)
SA0 (1:3)
SA1 (2:2)
4T4R
SA2 (3:1)
Layer,
DL
64QAM,
UL
16QAM,
Cat3)
SA0 (1:3)
2T2R
SA1 (2:2)
SA2 (3:1)
SA0 (1:3)
15 MHz
SA1 (2:2)
4T4R
SA2 (3:1)
Issue 05 (2014-08-30)
Multi-Antenna
Technique
Specifications
1x2 UL (SIMO)
20 Mbit/s
2x2 DL (MIMO)
110 Mbit/s
1x2 UL (SIMO)
9 Mbit/s
2x2 DL (MIMO)
50 Mbit/s
1x4 UL (SIMO)
31 Mbit/s
2x2 DL (MIMO)
80 Mbit/s
1x4 UL (SIMO)
20 Mbit/s
2x4 UL
(VMIMO)
30 Mbit/s
2x2 DL (MIMO)
110 Mbit/s
1x4 UL (SIMO)
9 Mbit/s
2x4 UL
(VMIMO)
14 Mbit/s
2x2 DL (MIMO)
36 Mbit/s
1x2 UL (SIMO)
23 Mbit/s
2x2 DL (MIMO)
58 Mbit/s
1x2 UL (SIMO)
15 Mbit/s
2x2 DL (MIMO)
80 Mbit/s
1x2 UL (SIMO)
7 Mbit/s
2x2 DL (MIMO)
36 Mbit/s
1x4 UL (SIMO)
23 Mbit/s
2x2 DL (MIMO)
58 Mbit/s
1x4 UL (SIMO)
15 Mbit/s
2x4 UL
(VMIMO)
30 Mbit/s
2x2 DL (MIMO)
80 Mbit/s
1x4 UL (SIMO)
7 Mbit/s
2x4 UL
(VMIMO)
15 Mbit/s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57
3900 Series Base Station
Technical Description
Item
5 Product Specifications
Cell
Bandw
idth
Transmit
and
Receive
Mode
Subframe
Ratio
SA0 (1:3)
2T2R
SA1 (2:2)
SA2 (3:1)
SA0 (1:3)
10 MHz
SA1 (2:2)
4T4R
SA2 (3:1)
SA0 (1:3)
2T2R
SA1 (2:2)
SA2 (3:1)
5 MHz
SA0 (1:3)
4T4R
SA1 (2:2)
SA2 (3:1)
Issue 05 (2014-08-30)
Multi-Antenna
Technique
Specifications
2x2 DL (MIMO)
23 Mbit/s
1x2 UL (SIMO)
14 Mbit/s
2x2 DL (MIMO)
40 Mbit/s
1x2 UL (SIMO)
10 Mbit/s
2x2 DL (MIMO)
52 Mbit/s
1x2 UL (SIMO)
5 Mbit/s
2x2 DL (MIMO)
23 Mbit/s
1x4 UL (SIMO)
14 Mbit/s
2x2 DL (MIMO)
40 Mbit/s
1x4 UL (SIMO)
10 Mbit/s
2x4 UL
(VMIMO)
19 Mbit/s
2x2 DL (MIMO)
52 Mbit/s
1x4 UL (SIMO)
5 Mbit/s
2x4 UL
(VMIMO)
8 Mbit/s
2x2 DL (MIMO)
10 Mbit/s
1x2 UL (SIMO)
6 Mbit/s
2x2 DL (MIMO)
18 Mbit/s
1x2 UL (SIMO)
5 Mbit/s
2x2 DL (MIMO)
25 Mbit/s
1x2 UL (SIMO)
2 Mbit/s
2x2 DL (MIMO)
10 Mbit/s
1x4 UL (SIMO)
6 Mbit/s
2x2 DL (MIMO)
18 Mbit/s
1x4 UL (SIMO)
5 Mbit/s
2x4 UL
(VMIMO)
10 Mbit/s
2x2 DL (MIMO)
25 Mbit/s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
58
3900 Series Base Station
Technical Description
Item
5 Product Specifications
Cell
Bandw
idth
Transmit
and
Receive
Mode
Subframe
Ratio
SA0 (1:3)
2T2R
SA1 (2:2)
SA2 (3:1)
20 MHz
SA0 (1:3)
4T4R
Maximu
m
throughp
ut per
user
(MAC
Layer,
DL
64QAM,
UL
16QAM,
Cat3)
SA1 (2:2)
SA2 (3:1)
SA0 (1:3)
2T2R
SA1 (2:2)
SA2 (3:1)
15 MHz
SA0 (1:3)
4T4R
SA1 (2:2)
SA2 (3:1)
10 MHz
Issue 05 (2014-08-30)
2T2R
SA0 (1:3)
Multi-Antenna
Technique
Specifications
1x4 UL (SIMO)
2 Mbit/s
2x4 UL
(VMIMO)
5 Mbit/s
2x2 DL (MIMO)
38 Mbit/s
1x2 UL (SIMO)
28 Mbit/s
2x2 DL (MIMO)
60 Mbit/s
1x2 UL (SIMO)
20 Mbit/s
2x2 DL (MIMO)
80 Mbit/s
1x2 UL (SIMO)
10 Mbit/s
2x2 DL (MIMO)
38 Mbit/s
1x4 UL (SIMO)
28 Mbit/s
2x2 DL (MIMO)
60 Mbit/s
1x4 UL (SIMO)
20 Mbit/s
2x2 DL (MIMO)
80 Mbit/s
1x4 UL (SIMO)
10 Mbit/s
2x2 DL (MIMO)
36 Mbit/s
1x2 UL (SIMO)
23 Mbit/s
2x2 DL (MIMO)
58 Mbit/s
1x2 UL (SIMO)
15 Mbit/s
2x2 DL (MIMO)
80 Mbit/s
1x2 UL (SIMO)
7 Mbit/s
2x2 DL (MIMO)
36 Mbit/s
1x4 UL (SIMO)
23 Mbit/s
2x2 DL (MIMO)
58 Mbit/s
1x4 UL (SIMO)
15 Mbit/s
2x2 DL (MIMO)
80 Mbit/s
1x4 UL (SIMO)
7 Mbit/s
2x2 DL (MIMO)
23 Mbit/s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
59
3900 Series Base Station
Technical Description
Item
5 Product Specifications
Cell
Bandw
idth
Transmit
and
Receive
Mode
Subframe
Ratio
SA1 (2:2)
SA2 (3:1)
SA0 (1:3)
4T4R
SA1 (2:2)
SA2 (3:1)
SA0 (1:3)
2T2R
SA1 (2:2)
SA2 (3:1)
5 MHz
SA0 (1:3)
4T4R
SA1 (2:2)
SA2 (3:1)
Multi-Antenna
Technique
Specifications
1x2 UL (SIMO)
13 Mbit/s
2x2 DL (MIMO)
40 Mbit/s
1x2 UL (SIMO)
10 Mbit/s
2x2 DL (MIMO)
52 Mbit/s
1x2 UL (SIMO)
5 Mbit/s
2x2 DL (MIMO)
23 Mbit/s
1x4 UL (SIMO)
13 Mbit/s
2x2 DL (MIMO)
40 Mbit/s
1x4 UL (SIMO)
10 Mbit/s
2x2 DL (MIMO)
52 Mbit/s
1x4 UL (SIMO)
5 Mbit/s
2x2 DL (MIMO)
10 Mbit/s
1x2 UL (SIMO)
4 Mbit/s
2x2 DL (MIMO)
18 Mbit/s
1x2 UL (SIMO)
4 Mbit/s
2x2 DL (MIMO)
25 Mbit/s
1x2 UL (SIMO)
2 Mbit/s
2x2 DL (MIMO)
10 Mbit/s
1x4 UL (SIMO)
4 Mbit/s
2x2 DL (MIMO)
18 Mbit/s
1x4 UL (SIMO)
4 Mbit/s
2x2 DL (MIMO)
25 Mbit/s
1x4 UL (SIMO)
2 Mbit/s
Baseband Specifications of a Multimode Base Station
The following tables provide the baseband specifications in GU, GL, UL, and GUL co-BBP
scenarios, respectively.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
60
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-25 Baseband specifications of GU co-BBP
Board
Type
GSM
TRX
Numbe
r of
UMTS
Cells
Numbe
r of
UMTS
UL CEs
Numbe
r of
UMTS
DL CEs
Numbe
r of
UMTS
HSDPA
Codes
Numbe
r of
UMTS
HSDPA
UEs
Numbe
r of
UMTS
HSUPA
UEs
UBBPd1
12
6
192
256
6x15
144
144
UBBPd2
12
6
256
384
6x15
192
192
UBBPd3
12
6
192
256
6x15
144
144
UBBPd4
12
6
256
384
6x15
192
192
UBBPd5
18
6
384
512
6x15
288
288
UBBPd6
24
6
512
768
6x15
384
384
Table 5-26 Baseband specifications of GL co-BBP
Board Type
GSM TRX
Maximum
Number of
UEs in
RRC_Connect
ed Mode per
eNodeB FDD
Maximum
Number of
LTE FDD
Cells per
Baseband
Board
LTE FDD
Maximum
Throughput
per Baseband
Board (Mbit/
s)
UBBPd3
12
1 UBBPd3
3 (2 R cells, with
1.4 MHz/3
MHz/5 MHz/10
MHz
bandwidth)
l Downlink:
225
l 504 with 1.4
MHz
bandwidth
l 1080 with 3
MHz
bandwidth
l Uplink:
112.5
l 1800 with 5
MHz
bandwidth
l 3600 with 10
MHz
bandwidth
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
61
3900 Series Base Station
Technical Description
5 Product Specifications
Board Type
GSM TRX
Maximum
Number of
UEs in
RRC_Connect
ed Mode per
eNodeB FDD
Maximum
Number of
LTE FDD
Cells per
Baseband
Board
LTE FDD
Maximum
Throughput
per Baseband
Board (Mbit/
s)
UBBPd4
12
1 UBBPd4
3 (2 R cells, with
1.4 MHz/3
MHz/5 MHz/10
MHz
bandwidth)
l Downlink:
220
3 (2 R or 4 R
cells, with 1.4
MHz/3 MHz/5
MHz/10 MHz/
15 MHz/20
MHz
bandwidth)
l Downlink:
600
l 504 with 1.4
MHz
bandwidth
l 1080 with 3
MHz
bandwidth
l Uplink:
112.5
l 1800 with 5
MHz
bandwidth
l 3600 with 10
MHz
bandwidth
UBBPd5
18
1 UBBPd5
l 504 with 1.4
MHz
bandwidth
l 1080 with 3
MHz
bandwidth
l Uplink: 225
l 1800 with 5
MHz
bandwidth
l 3600 with
10/15/20
MHz
bandwidth
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
62
3900 Series Base Station
Technical Description
5 Product Specifications
Board Type
GSM TRX
Maximum
Number of
UEs in
RRC_Connect
ed Mode per
eNodeB FDD
Maximum
Number of
LTE FDD
Cells per
Baseband
Board
LTE FDD
Maximum
Throughput
per Baseband
Board (Mbit/
s)
UBBPd6
24
1 UBBPd6
3 (2 R or 4 R
cells, with 1.4
MHz/3 MHz/5
MHz/10 MHz/
15 MHz/20
MHz
bandwidth)
l Downlink:
600
l 504 with 1.4
MHz
bandwidth
l 1080 with 3
MHz
bandwidth
l Uplink: 225
l 1800 with 5
MHz
bandwidth
l 3600 with
10/15/20
MHz
bandwidth
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
63
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-27 Baseband specifications of UL co-BBP
Board
Type
Num
ber of
UMT
S
Cells
Num
ber of
UMT
S UL
CEs
Num
ber of
UMT
S DL
CEs
Num
ber of
UMT
S
HSD
PA
Code
s
Num
ber of
UMT
S
HSD
PA
UEs
Num
ber of
UMT
S
HSU
PA
UEs
Maxi
mum
Num
ber of
UEs
in
RRC_
Conn
ected
Mode
per
eNod
eB
FDD
Maxi
mum
Num
ber of
LTE
FDD
Cells
per
Baseb
and
Board
LTE
FDD
Maxi
mum
Thro
ughp
ut per
Baseb
and
Board
(Mbit
/s)
UBBP
d6
6
512
768
6x15
384
384
1
UBBP
d6
3 (2 R
or 4 R
cells,
with
1.4
MHz/
3
MHz/
5
MHz/
10
MHz/
15
MHz/
20
MHz
bandw
idth)
l Do
wn
lin
k:
60
0
l 50
4
wit
h
1.4
M
Hz
ba
nd
wi
dth
l 10
80
wit
h3
M
Hz
ba
nd
wi
dth
l Up
lin
k:
22
5
l 18
00
wit
h5
M
Hz
ba
nd
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64
3900 Series Base Station
Technical Description
Board
Type
5 Product Specifications
Num
ber of
UMT
S
Cells
Num
ber of
UMT
S UL
CEs
Num
ber of
UMT
S DL
CEs
Num
ber of
UMT
S
HSD
PA
Code
s
Num
ber of
UMT
S
HSD
PA
UEs
Num
ber of
UMT
S
HSU
PA
UEs
Maxi
mum
Num
ber of
UEs
in
RRC_
Conn
ected
Mode
per
eNod
eB
FDD
Maxi
mum
Num
ber of
LTE
FDD
Cells
per
Baseb
and
Board
LTE
FDD
Maxi
mum
Thro
ughp
ut per
Baseb
and
Board
(Mbit
/s)
wi
dth
l 36
00
wit
h
10/
15/
20
M
Hz
ba
nd
wi
dth
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-28 Baseband specifications of GUL co-BBP
Boar
d
Type
GS
M
TRX
Num
ber
of
UM
TS
Cells
Num
ber
of
UM
TS
UL
CEs
Num
ber
of
UM
TS
DL
CEs
Num
ber
of
UM
TS
HSD
PA
Code
s
Num
ber
of
UM
TS
HSD
PA
UEs
Num
ber
of
UM
TS
HSU
PA
UEs
Maxi
mum
Num
ber
of
UEs
in
RRC
_Con
necte
d
Mod
e per
eNo
deB
FDD
Maxi
mum
Num
ber
of
LTE
FDD
Cells
per
Base
band
Boar
d
LTE
FDD
Maxi
mum
Thro
ughp
ut
per
Base
band
Boar
d
(Mbi
t/s)
UBB
Pd6
12
6
256
384
6x15
192
192
1
UBB
Pd6
3 (2 R
or 4 R
cells,
with
1.4
MHz/
3
MHz/
5
MHz/
10
MHz/
15
MHz/
20
MHz
band
width
)
l D
o
w
nli
nk
:
60
0
l 50
4
wi
th
1.
4
M
H
z
ba
nd
wi
dt
h
l 10
80
wi
th
3
M
H
z
ba
nd
wi
dt
h
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l U
pli
nk
:
22
5
66
3900 Series Base Station
Technical Description
Boar
d
Type
5 Product Specifications
GS
M
TRX
Num
ber
of
UM
TS
Cells
Num
ber
of
UM
TS
UL
CEs
Num
ber
of
UM
TS
DL
CEs
Num
ber
of
UM
TS
HSD
PA
Code
s
Num
ber
of
UM
TS
HSD
PA
UEs
Num
ber
of
UM
TS
HSU
PA
UEs
Maxi
mum
Num
ber
of
UEs
in
RRC
_Con
necte
d
Mod
e per
eNo
deB
FDD
Maxi
mum
Num
ber
of
LTE
FDD
Cells
per
Base
band
Boar
d
LTE
FDD
Maxi
mum
Thro
ughp
ut
per
Base
band
Boar
d
(Mbi
t/s)
l 18
00
wi
th
5
M
H
z
ba
nd
wi
dt
h
l 36
00
wi
th
10
/
15
/
20
M
H
z
ba
nd
wi
dt
h
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
67
3900 Series Base Station
Technical Description
5 Product Specifications
5.1.3 Signaling Specifications
This section describes the signaling specifications of 3900 series base stations.
NodeB Signaling Specifications
The following table provides the signaling specifications of a NodeB when the typical board
combination is used.
Table 5-29 NodeB board combination and signaling specifications
Main
Processing
and
Transmissi
on Unit
Number of
WBBPb/
WBBPd
Boards
Number of
WBBPf
Boards
Number of
UBBPd1/
UBBPd12/
UBBPd3/
UBBPd4/
UBBPd5
Boards
Number of
UBBPd6
Boards
Signaling
Specificatio
ns
(CNBAPS)
WMPT
1
0
0
0
60
2
0
0
0
120
3
0
0
0
180
≥4
0
0
0
200
Any
≥1
0
0
200
0
Any
≥1
0
200
0
Any
0
≥1
200
1
0
0
0
60
2
0
0
0
120
3
0
0
0
180
4
0
0
0
240
5
0
0
0
300
0
1
0
0
200
1
1
0
0
260
≥2
1
0
0
300
Any
≥2
0
0
300
0
0
1
0
200
0
≥1
1
0
300
0
Any
≥2
0
300
WMPT
+UTRP
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
68
3900 Series Base Station
Technical Description
Main
Processing
and
Transmissi
on Unit
WMPT
+UTRPc
Issue 05 (2014-08-30)
5 Product Specifications
Number of
WBBPb/
WBBPd
Boards
Number of
WBBPf
Boards
Number of
UBBPd1/
UBBPd12/
UBBPd3/
UBBPd4/
UBBPd5
Boards
Number of
UBBPd6
Boards
Signaling
Specificatio
ns
(CNBAPS)
0
Any
0
≥1
300
1
0
0
0
400
2
0
0
0
460
3
0
0
0
520
4
0
0
0
580
5
0
0
0
640
6
0
0
0
700
0
1
0
0
500
1
1
0
0
560
2
1
0
0
620
3
1
0
0
680
4
1
0
0
740
5
1
0
0
800
0
2
0
0
700
1
2
0
0
760
2
2
0
0
820
3
2
0
0
880
4
2
0
0
940
0
3
0
0
900
1
3
0
0
960
2
3
0
0
1020
3
3
0
0
1080
0
4
0
0
1100
1
4
0
0
1160
2
4
0
0
1220
0
5
0
0
1300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
69
3900 Series Base Station
Technical Description
Main
Processing
and
Transmissi
on Unit
Issue 05 (2014-08-30)
5 Product Specifications
Number of
WBBPb/
WBBPd
Boards
Number of
WBBPf
Boards
Number of
UBBPd1/
UBBPd12/
UBBPd3/
UBBPd4/
UBBPd5
Boards
Number of
UBBPd6
Boards
Signaling
Specificatio
ns
(CNBAPS)
1
5
0
0
1360
0
6
0
0
1500
0
0
1
0
500
0
1
1
0
700
0
2
1
0
900
0
3
1
0
1100
0
4
1
0
1300
0
5
1
0
1500
0
0
2
0
700
0
1
2
0
900
0
2
2
0
1100
0
3
2
0
1300
0
4
2
0
1500
0
0
3
0
900
0
1
3
0
1100
0
2
3
0
1300
0
3
3
0
1500
0
0
4
0
1100
0
1
4
0
1300
0
2
4
0
1500
0
0
5
0
1300
0
1
5
0
1500
0
0
6
0
1500
0
0
0
1
600
0
1
0
1
800
0
2
0
1
1000
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
70
3900 Series Base Station
Technical Description
Main
Processing
and
Transmissi
on Unit
UMPTa1/
UMPTb1
Issue 05 (2014-08-30)
5 Product Specifications
Number of
WBBPb/
WBBPd
Boards
Number of
WBBPf
Boards
Number of
UBBPd1/
UBBPd12/
UBBPd3/
UBBPd4/
UBBPd5
Boards
Number of
UBBPd6
Boards
Signaling
Specificatio
ns
(CNBAPS)
0
3
0
1
1200
0
4
0
1
1400
0
5
0
1
1500
0
0
0
2
900
0
1
0
2
1100
0
2
0
2
1300
0
≥3
0
2
1500
0
0
0
3
1200
0
1
0
3
1400
0
≥2
0
3
1500
0
Any
0
≥4
1500
1
0
0
0
400
2
0
0
0
460
3
0
0
0
520
4
0
0
0
580
5
0
0
0
640
6
0
0
0
700
0
1
0
0
500
1
1
0
0
560
2
1
0
0
620
3
1
0
0
680
4
1
0
0
740
5
1
0
0
800
0
2
0
0
700
1
2
0
0
760
2
2
0
0
820
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71
3900 Series Base Station
Technical Description
Main
Processing
and
Transmissi
on Unit
Issue 05 (2014-08-30)
5 Product Specifications
Number of
WBBPb/
WBBPd
Boards
Number of
WBBPf
Boards
Number of
UBBPd1/
UBBPd12/
UBBPd3/
UBBPd4/
UBBPd5
Boards
Number of
UBBPd6
Boards
Signaling
Specificatio
ns
(CNBAPS)
3
2
0
0
880
4
2
0
0
940
0
3
0
0
900
1
3
0
0
960
2
3
0
0
1020
3
3
0
0
1080
0
4
0
0
1100
1
4
0
0
1160
2
4
0
0
1220
0
5
0
0
1300
1
5
0
0
1360
0
6
0
0
1500
0
0
1
0
500
0
1
1
0
700
0
2
1
0
900
0
3
1
0
1100
0
4
1
0
1300
0
5
1
0
1500
0
0
2
0
700
0
1
2
0
900
0
2
2
0
1100
0
3
2
0
1300
0
4
2
0
1500
0
0
3
0
900
0
1
3
0
1100
0
2
3
0
1300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
72
3900 Series Base Station
Technical Description
5 Product Specifications
Main
Processing
and
Transmissi
on Unit
Number of
WBBPb/
WBBPd
Boards
Number of
WBBPf
Boards
Number of
UBBPd1/
UBBPd12/
UBBPd3/
UBBPd4/
UBBPd5
Boards
Number of
UBBPd6
Boards
Signaling
Specificatio
ns
(CNBAPS)
0
3
3
0
1500
0
0
4
0
1100
0
1
4
0
1300
0
2
4
0
1500
0
0
5
0
1300
0
1
5
0
1500
0
0
6
0
1500
0
0
0
1
600
0
1
0
1
800
0
2
0
1
1000
0
3
0
1
1200
0
4
0
1
1400
0
5
0
1
1500
0
0
0
2
900
0
1
0
2
1100
0
2
0
2
1300
0
≥3
0
2
1500
0
0
0
3
1200
0
1
0
3
1400
0
≥2
0
3
1500
0
Any
0
≥4
1500
Signaling Specifications of eNodeBs
NOTE
Busy hour call attempts (BHCA) indicates the number of calls attempts during busy hours. The BHCA
represents the signaling processing capability of a system.
The following table lists the signaling specifications of the LMPT, UMPT, LBBP, and UBBP.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
73
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-30 Signaling specifications of the LMPT, UMPT, LBBP, and UBBP
Board
Signaling Specification (BHCA)
UMPTa2 or UMPTa6
140000
UMPTb2 or UMPTb1
180000
LMPT
60000
LBBPc
60000
LBBPd1, LBBPd2, or LBBPd3
80000
UBBPd3 or UBBPd4
90000
UBBPd5 or UBBPd6
180000
The following table provides the formula for calculating the signaling specifications of an
eNodeB.
Board Combination
Formula
LBBP + LMPT
Min[∑ (Capacity of LBBP), ∑ (Capacity of
LMPT)]
LBBP + UMPT
Min[∑ (Capacity of LBBP), ∑ (Capacity of
UMPT)]
LBBP + (LMPT + UMPT)
Min[∑ (Capacity of LBBP), ∑ (Capacity of
LMPT + UMPT)]
UBBP + LMPT
Min[∑ (Capacity of UBBP), ∑ (Capacity of
LMPT)]
UBBP + UMPT
∑ (Capacity of UBBP)
(UBBP + LBBP) + LMPT
Min[∑ (Capacity of UBBP + LBBP), ∑
(Capacity of LMPT)]
(UBBP + LBBP) + (LMPT + UMPT)
Min[∑ (Capacity of UBBP + LBBP), ∑
(Capacity of LMPT + UMPT + UBBP)]
NOTE
l The signaling specifications of an eNodeB cannot exceed 480000 BHCA.
l The general formula for calculating the signaling specifications is as follows: Min[∑ (Capacity of UBBP
+ LBBP), ∑ (Capacity of LMPT + UMPT + UBBP), 480000].
The following table lists the typical board combinations and the corresponding signaling
specifications of eNodeBs.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
74
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-31 Typical board combinations and the corresponding signaling specifications
Board Combination
Signaling Specifications (BHCA)
1 LMPT + 1 LBBPc
60000
1 LMPT + 2 LBBPc
60000
1 LMPT + 3 LBBPc
60000
1 UMPT + 1 LBBPd
80000
1 UMPT + 2 LBBPd
140000 (UMPTa)
160000 (UMPTb)
1 UMPT + 3 LBBPd
140000 (UMPTa)
180000 (UMPTb)
1 UMPTb + 1 UBBPd
90000 (UBBPd3/UBBPd4)
180000 (UBBPd5/UBBPd6)
Signaling Specifications of Co-MPT Multimode Base Stations
Table 5-32 lists the signaling specifications of the BBU in co-MPT multimode base stations.
NOTE
l
In SRAN8.0, the signaling specifications supported by the UMPTa1 and UMPTa2 are the same as the
signaling specifications supported by the UMPTb1.
l
If GSM is configured with 72 carriers (S24/24/24), each carrier can be configured with one Standalone
Dedicated Control CHannel (SDCCH) only; if GSM is configured with 24 carriers (S8/8/8), each carirer
can be configured three SDCCHs.
Table 5-32 Signaling specifications of the BBU in co-MPT multimode base stations
Mo
de
Typical Signaling Specifications
Recommended
Board
Configuration
GU
GSM 24 TRX + UMTS 800 CNBAPS
1 UMPTb1 + 4
UBBPd2_U boards
GSM 24 TRX + UMTS 400 CNBAPS
1 UMPTb1 + 2
UBBPd2_U boards
GSM 24 TRX + LTE 405000 BHCA
1 UMPTb1 + 5
UBBPd3_L boards
GSM 24 TRX + LTE 270000 BHCA
1 UMPTb1 + 3
UBBPd3_L boards
GSM 24 TRX + LTE 180000 BHCA
1 UMPTb1 + 2
UBBPd3_L boards
GL
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
75
3900 Series Base Station
Technical Description
5 Product Specifications
Mo
de
Typical Signaling Specifications
Recommended
Board
Configuration
GUL
GSM 18 TRX + UMTS 400 CNBAPS + LTE 270000
BHCA
1 UMPTb1 + 2
UBBPd2_U boards + 3
UBBPd3_L
GSM 18 TRX + UMTS 600 CNBAPS + LTE 180000
BHCA
1 UMPTb1 + 3
UBBPd2_U boards + 2
UBBPd3_L
5.1.4 CPRI Specifications
This section describes the CPRI specifications of the GTMU, UBRI, WBBP, LBBP, and UBBP.
CPRI specifications of a GTMU
The following table lists the specifications of CPRI ports on the GTMU and GTMUb.
Table 5-33 Specifications of CPRI ports on the GTMU and GTMUb
Board
Quantity of CPRI
Ports
CPRI Port Rate
(Gbit/s)
Topology Type
GTMU
6
1.25
Star, chain, and ring
topologies
GTMUb
6
1.25 or 2.5
Star, chain, and ring
topologies
CPRI specifications of a UBRI
The following table lists the specifications of the CPRI ports on the UBRI and UBRIb.
Table 5-34 Specifications of the CPRI ports on the UBRI and UBRIb
Issue 05 (2014-08-30)
Board
Quantity of CPRI
Ports
CPRI Port Rate
(Gbit/s)
Topology Type
UBRI
6
1.25 or 2.5
Star, chain, and ring
topologies
UBRIb
6
1.25, 2.5, 4.9, 6.144,
or 9.8
Star, chain, and ring
topologies
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
76
3900 Series Base Station
Technical Description
5 Product Specifications
CPRI specifications of a WBBP
The following table describes the specifications of the CPRI ports on the WBBP.
Table 5-35 Specifications of CPRI ports on the WBBP
Board
Quantity of CPRI
Ports
CPRI Port Rate
(Gbit/s)
Topology Type
WBBPa
3
1.25
Star, chain, and ring
topologies
WBBPb1/WBBPb2/
WBBPb3/WBBPb4
3
1.25/2.5
Star, chain, and ring
topologies
WBBPd
6
1.25 or 2.5
Star, chain, and ring
topologies
WBBPf
6
1.25, 2.5, 4.9, or
6.144
Star, chain, and ring
topologies
CPRI ports with different rates support different numbers of cells, as listed in the following table.
Table 5-36 Mapping between the CPRI port rate and the number of cells
CPRI Port Rate (Gbit/s)
Number of 1T2R Cells
Number of 2T2R Cells
1.25
4
4*a
2.5
8
8*a
4.9
16
16*a
6.144
24
24*a
a: * in the preceding table indicates that the number of 2T2R cells is halved if two TX antennas
enabled with the virtual antenna mapping (VAM) function are connected to two RF modules
carried on different CPRI links.
NOTE
In a GU dual-mode base station where the GTMU is connected to port on the WMPT or UMPT through
ports on their panels, part of CPRI bandwidth of UMTS mode is reserved for a TX and an RX channel of
GSM mode in case that bandwidths of GSM mode are insufficient. As a result, the number of cells supported
by UMTS mode is reduced.
CPRI specifications of an LBBP
The following table lists the specifications of CPRI ports on the LBBP.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
77
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-37 Specifications of CPRI ports on the LBBP
Board
Quantity of CPRI
Ports
CPRI Port Rate
(Gbit/s)
Topology Type
LBBPc
6
1.25, 2.5, or 4.9
Star, chain, and ring
topologies
LBBPd
6
1.25, 2.5, 4.9, 6.144,
or 9.8
Star, chain, and ring
topologies
CPRI ports with different data rates support different numbers of cells. Table 5-38 lists the
mapping between the CPRI port rate and the number of cells in LTE FDD scenarios. Table
5-39 lists the mapping between the CPRI port rate and the number of cells in LTE TDD scenarios.
Table 5-38 Mapping between the CPRI port rate and the number of cells in an LTE FDD scenario
CPRI Port Rate (Gbit/s)
Number of 4x4 MIMO
Cells
Number of 2x2 MIMO
Cells
1.25
4x4 MIMO cells are not
recommended because the
transmission bandwidth of
the CPRI ports is limited.
l 4 (cell bandwidth ≤ 3
MHz)
l 2 (cell bandwidth ≤ 5
MHz)
l 1 (cell bandwidth ≤ 10
MHz)
2.5
1 (cell bandwidth ≤ 10
MHz)
l 4 (cell bandwidth ≤ 5
MHz)
l 2 (cell bandwidth ≤ 10
MHz)
l 1 (cell bandwidth = 15
MHz or 20 MHz)
4.9
6.144
9.8
Issue 05 (2014-08-30)
l 2 (cell bandwidth ≤ 10
MHz)
l 4 (cell bandwidth ≤ 10
MHz)
l 1 (cell bandwidth = 15
MHz or 20 MHz)
l 2 (cell bandwidth = 15
MHz or 20 MHz)
l 2 (cell bandwidth ≤ 10
MHz)
l 4 (cell bandwidth ≤ 10
MHz)
l 1 (cell bandwidth = 15
MHz or 20 MHz)
l 2 (cell bandwidth = 15
MHz or 20 MHz)
l 4 (cell bandwidth ≤ 10
MHz)
l 4 (cell bandwidth ≤ 10
MHz)
l 2 (cell bandwidth = 15
MHz or 20 MHz)
l 4 (cell bandwidth = 15
MHz or 20 MHz)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
78
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-39 Mapping between the CPRI port rate and the number of cells in an LTE TDD scenario
CPRI Port
Rate (Gbit/s)
CPRI
Compressiona
Number of
8T8R Cells
Number of
4T4R Cells
Number of
2T2R Cells
2.5
Not in use
None
l 2 (cell
bandwidth =
5 MHz)
l 4 (cell
bandwidth =
5 MHz)
l 1 (cell
bandwidth =
10 MHz)
l 2 (cell
bandwidth =
10 MHz)
l None (cell
bandwidth =
15 MHz or
20 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l 1 (cell
bandwidth =
10 MHz)
l 3 (cell
bandwidth =
10 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz)
l 4 (cell
bandwidth =
5 MHz)
l 8 (cell
bandwidth =
5 MHz)
l 1 (cell
bandwidth =
10 MHz)
l 2 (cell
bandwidth =
10 MHz)
l 4 (cell
bandwidth =
10 MHz)
l None (cell
bandwidth =
15 MHz or
20 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l 1 (cell
bandwidth =
10 MHz)
l 3 (cell
bandwidth =
10 MHz)
l 6 (cell
bandwidth =
10 MHz)
l 1 (cell
bandwidth =
or 15 MHz
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l 4 (cell
bandwidth =
15 MHz or
20 MHz)
In use
4.9
Not in use
In use
Issue 05 (2014-08-30)
None
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
79
3900 Series Base Station
Technical Description
5 Product Specifications
CPRI Port
Rate (Gbit/s)
CPRI
Compressiona
Number of
8T8R Cells
Number of
4T4R Cells
Number of
2T2R Cells
9.8
Not in use
l None (cell
bandwidth =
5 MHz)
l 8 (cell
bandwidth =
5 MHz)
l 16 (cell
bandwidth =
5 MHz)
l 2 (cell
bandwidth =
10 MHz)
l 4 (cell
bandwidth =
10 MHz)
l 8 (cell
bandwidth =
10 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l 4 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l 2 (cell
bandwidth =
10 MHz)
l 4 (cell
bandwidth =
10 MHz)
l 8 (cell
bandwidth =
10 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l 5 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l 3 (cell
bandwidth =
10 MHz)
l 6 (cell
bandwidth =
10 MHz)
l 12 (cell
bandwidth =
10 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l 4 (cell
bandwidth =
15 MHz or
20 MHz)
l 8 (cell
bandwidth =
15 MHz or
20 MHz)
In use without
turning on the
CPRI extension
switch
In use with the
CPRI extension
switch being
turned on
a:
l CPRI compression is not supported when the cell bandwidth is 5 MHz.
l The LBBPc does not support CPRI compression.
l If the CPRI extension switch is turned on, carrier specifications supported by the LBBPd
with a data rate of 9.8 Gbit/s are affected only when CPRI compression is used. For details
about the CPRI extension switch, see the CPRIEX parameter in the MOD BBP or LST
BBP command. When the CPRI extension switch is turned on, only the CPRI0, CPRI1,
and CPRI2 ports on the LBBPd can be used.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
80
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The preceding table lists the maximum numbers of cells and antennas supported by each CPRI link with
a corresponding CPRI port rate. In combined RF module scenarios, the CPRI port rate is determined by
the actual numbers of cells and antennas carried by each CPRI link.
CPRI specifications of an UBBP
The following table lists the specifications of CPRI ports on the UBBP.
Table 5-40 Specifications of CPRI ports on the UBBP
Board
Quantity of CPRI
Ports
CPRI Port Rate
(Gbit/s)
Topology Type
UBBPd
6
1.25, 2.5, 4.9, 6.144,
or 9.8
Star, chain, and ring
topologies
The following table lists the mapping between the CPRI port rate and the number of carriers
supported by a UBBP working in GSM mode.
Table 5-41 Mapping between the CPRI port rate and the number of carriers
CPRI Port Rate (Gbit/s)
Number of 1T2R Carriers
Number of 2T2R or 1T4R
Carriers
1.25
24
12
2.5
48
24
4.9
48
24
9.8
48
24
CPRI ports with different rates on the UBBP working in UMTS mode support different numbers
of cells, as listed in the following table.
Table 5-42 Mapping between the CPRI port rate and the number of cells in a UMTS scenario
Issue 05 (2014-08-30)
CPRI Port Rate (Gbit/s)
Number of 1T2R Cells
Number of 2T2R Cells
1.25
4
4*a
2.5
8
8*a
4.9
16
16*a
6.144
24
24*a
9.8
32
32*a
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
81
3900 Series Base Station
Technical Description
5 Product Specifications
CPRI Port Rate (Gbit/s)
Number of 1T2R Cells
Number of 2T2R Cells
a: * in the preceding table indicates that the number of 2T2R cells is halved if two TX antennas
enabled with the virtual antenna mapping (VAM) function are separately connected to two
RF modules carried on different CPRI links.
CPRI ports with different rates on the UBBP working in LTE FDD mode support different
numbers of cells, as listed in the following table.
Table 5-43 Mapping between the CPRI port rate and the number of cells in an LTE FDD scenario
CPRI Port Rate (Gbit/s)
Number of 4x4 MIMO
Cells
Number of 2x2 MIMO
Cells
1.25
4x4 MIMO cells are not
recommended because the
transmission bandwidth of
the CPRI ports is limited.
l 4 (cell bandwidth ≤ 3
MHz)
l 2 (cell bandwidth ≤ 5
MHz)
l 1 (cell bandwidth ≤ 10
MHz)
2.5
1 (cell bandwidth ≤ 10
MHz)
l 4 (cell bandwidth ≤ 5
MHz)
l 2 (cell bandwidth ≤ 10
MHz)
l 1 (cell bandwidth = 15
MHz or 20 MHz)
4.9
6.144
9.8
l 2 (cell bandwidth ≤ 10
MHz)
l 4 (cell bandwidth ≤ 10
MHz)
l 1 (cell bandwidth = 15
MHz or 20 MHz)
l 2 (cell bandwidth = 15
MHz or 20 MHz)
l 2 (cell bandwidth ≤ 10
MHz)
l 4 (cell bandwidth ≤ 10
MHz)
l 1 (cell bandwidth = 15
MHz or 20 MHz)
l 2 (cell bandwidth = 15
MHz or 20 MHz)
l 4 (cell bandwidth ≤ 10
MHz)
l 4 (cell bandwidth ≤ 10
MHz)
l 2 (cell bandwidth = 15
MHz or 20 MHz)
l 4 (cell bandwidth = 15
MHz or 20 MHz)
CPRI ports with different data rates support different numbers of cells. The following table list
the number of cells supported by CPRI ports with different data rates when UBBP working in
LTE TDD scenarios.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
82
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-44 Mapping between the CPRI port rate and the number of cells in an LTE TDD scenario
CPRI Port
Rate (Gbit/s)
CPRI
Compressiona
Number of
8T8R Cells
Number of
4T4R Cells
Number of
2T2R Cells
2.5
Not in use
None
l 2 (cell
bandwidth =
5 MHz)
l 4 (cell
bandwidth =
5 MHz)
l 1 (cell
bandwidth =
10 MHz)
l 2 (cell
bandwidth =
10 MHz)
l None (cell
bandwidth =
15 MHz or
20 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l 1 (cell
bandwidth =
10 MHz)
l 3 (cell
bandwidth =
10 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz)
l 4 (cell
bandwidth =
5 MHz)
l 8 (cell
bandwidth =
5 MHz)
l 1 (cell
bandwidth =
10 MHz)
l 2 (cell
bandwidth =
10 MHz)
l 4 (cell
bandwidth =
10 MHz)
l None (cell
bandwidth =
15 MHz or
20 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l None (cell
bandwidth =
5 MHz)
l 1 (cell
bandwidth =
10 MHz)
l 3 (cell
bandwidth =
10 MHz)
l 6 (cell
bandwidth =
10 MHz)
l 1 (cell
bandwidth =
or 15 MHz
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l 4 (cell
bandwidth =
15 MHz or
20 MHz)
In use
4.9
Not in use
In use
Issue 05 (2014-08-30)
None
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
83
3900 Series Base Station
Technical Description
5 Product Specifications
CPRI Port
Rate (Gbit/s)
CPRI
Compressiona
Number of
8T8R Cells
Number of
4T4R Cells
Number of
2T2R Cells
9.8
Not in use
l None (cell
bandwidth =
5 MHz)
l 8 (cell
bandwidth =
5 MHz)
l 16 (cell
bandwidth =
5 MHz)
l 2 (cell
bandwidth =
10 MHz)
l 4 (cell
bandwidth =
10 MHz)
l 8 (cell
bandwidth =
10 MHz)
l 1 (cell
bandwidth =
15 MHz or
20 MHz)
l 2 (cell
bandwidth =
15 MHz or
20 MHz)
l 4 (cell
bandwidth =
15 MHz or
20 MHz)
l None (cell
bandwidth =
5 MHz or 15
MHz)
l None (cell
bandwidth =
5 MHz or 15
MHz)
l None (cell
bandwidth =
5 MHz or 15
MHz)
l 3 (cell
bandwidth =
10 MHz)
l 6 (cell
bandwidth =
10 MHz)
l 12 (cell
bandwidth =
10 MHz)
l 2 (cell
bandwidth =
20 MHz)
l 4 (cell
bandwidth =
20 MHz)
l 8 (cell
bandwidth =
20 MHz)
In use
5.1.5 Transmission Port
This section describes the transmission ports on a BBU.
The following table lists transmission ports on a single-mode BBU.
Mode
Transmission Port
GTMU: 1 E1/T1 port (4 E1s/T1s), 1 FE
electrical port, and 1 FE optical port
GSM
UMPT: 1 E1/T1 port (4 E1s/T1s), 1 FE/GE
electrical port, and 1 FE/GE optical port
UTRPb4: 2 E1/T1 ports (8 E1s/T1s)
UTRPc: 4 FE/GE electrical ports and 2 FE/
GE optical ports
UMTS
Issue 05 (2014-08-30)
WMPT: 1 E1/T1 port (4 E1s/T1s), 1 FE
electrical port, and 1 FE optical port
UMPT: 1 E1/T1 port (4 E1s/T1s), 1 FE/GE
electrical port, and 1 FE/GE optical port
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
84
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Transmission Port
UTRP2: 2 FE/GE optical ports
UTRP3: 2 E1/T1 ports (8 E1s/T1s)
UTRP4: 2 E1/T1 ports (8 E1s/T1s)
UTRP6: 1 STM-1 or OC-3 port
UTRP9: 4 FE/GE electrical ports
UTRPc: 4 FE/GE electrical ports and 2 FE/
GE optical ports
UTRPa: 2 E1/T1 ports (8 E1s/T1s)
LMPT: 2 FE/GE electrical ports, 2 FE/GE
optical ports, or 1 FE/GE optical port + 1 FE/
GE electrical port
UMPT: 1 E1/T1 port (4 E1s/T1s), 1 FE/GE
electrical port, and 1 FE/GE optical port
LTE FDD
UTRPc: 4 FE/GE electrical ports and 2 FE/
GE optical ports
LMPT: 2 FE/GE electrical ports, 2 FE/GE
optical ports, or 1 FE/GE optical port + 1 FE/
GE electrical port
UMPT: 1 E1/T1 port (4 E1s/T1s), 1 FE/GE
electrical port, and 1 FE/GE optical port
LTE TDD
UTRPc: 4 FE/GE electrical ports and 2 FE/
GE optical ports
5.1.6 Engineering Specifications
This section describes the engineering specifications of the BBU, including the power
specifications, size, weight, heat dissipation capability, environmental specifications, and surge
protection specifications.
Input Power Specifications
The following table lists the input power specifications of the BBU.
Table 5-45 Input power specifications of the BBU
Issue 05 (2014-08-30)
Type
Input Power
Voltage Range
BBU3900
(UPEUc)
-48 V DC
-38.4 V DC to -57 V DC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
85
3900 Series Base Station
Technical Description
5 Product Specifications
Type
Input Power
Voltage Range
BBU3910
(UPEUd)
-48 V DC
-38.4 V DC to -57 V DC
Equipment Specifications
The BBU3900 and BBU3910 have the same size and weight, as provided in the following table.
Table 5-46 Size and weight of the BBU
Item
Specifications
Dimensions (H x W
x D)
86 mm x 442 mm x 310 mm
Weight
l ≤ 12 kg (full configuration)
l ≤ 7 kg (typical configuration)
Heat Dissipation Capability
The following table lists the heat dissipation capability of the BBU.
Table 5-47 Heat dissipation capability of the BBU
Type
Configuration
Specifications
BBU3900
FAN
350 W
FANc
650 W
FANd
650 W
BBU3910
Environment Specifications
The BBU3900 and BBU3910 have the same environment specifications, as provided in the
following table
Table 5-48 Environment specifications of the BBU
Issue 05 (2014-08-30)
Item
Specifications
Operating
temperature
l Long term: -20ºC to +55ºC
Relative humidity
5% RH to 95% RH
l Short term: +55ºC to +60ºC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
86
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specifications
Protection level
IP20
Atmospheric
Pressure
70 kPa to 106 kPa
Noise Sound Power
Level
ETS 300 753 3.1
Storage Time
It is recommended that the device be installed and used within one
year after its delivery because of the failure rate.
≤7.2bels
Surge Protection Specifications
The BBU3900 and BBU3910 have the same surge protection specifications, as provided in
Table 5-49.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-49 Surge protection specifications of the ports on the BBU
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge
Protection
Mode
Specification
-48 V DC
port
Applicable to
the scenario
where the BBU
and devices
interconnected
through this
port are
installed
indoors
Differential mode
1 kA
Common mode
2 kA
FE/GE
port
Applicable to
the scenario
where the BBU
and devices
interconnected
through this
port are
installed
indoors (surge)
Differential mode
0.5 kV (1.2/50 μs)
Common mode
4 kV (1.2/50 μs)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
87
3900 Series Base Station
Technical Description
Port
GPS port
RGPS port
Issue 05 (2014-08-30)
5 Product Specifications
Usage
Scenario
Surge
Protection
Mode
Specification
Applicable to
the scenario
where some
devices are
configured
remotely or the
scenario where
the BBU and
devices
interconnected
through this
port are placed
outdoors
(surge
protector
configured)
Differential mode
3 kA
Common mode
5 kA
Applicable to
the scenario
where some
devices are
configured
remotely or the
scenario where
the BBU and
devices
interconnected
through this
port are placed
outdoors
(surge
protector
configured)
Differential mode
8 kA
Common mode
40 kA
Applicable to
the scenario
where some
devices are
configured
remotely or the
scenario where
the BBU and
devices
interconnected
through this
port are placed
outdoors
Differential mode
3 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88
3900 Series Base Station
Technical Description
Port
E1/T1 port
Issue 05 (2014-08-30)
5 Product Specifications
Usage
Scenario
Surge
Protection
Mode
Specification
(surge
protection
module
configured)
Common mode
5 kA
Applicable to
the scenario
where the BBU
and devices
interconnected
through this
port are
installed
indoors
Differential mode
250 A
Common mode
250 A
Applicable to
the scenario
where some
devices are
configured
remotely or the
scenario where
the BBU and
devices
interconnected
through this
port are placed
outdoors
(surge
protection
board
configured)
Differential mode
3 kA
Common mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
89
3900 Series Base Station
Technical Description
Port
Usage
Scenario
Surge
Protection
Mode
Specification
Dry
contact
Applicable to
the scenario
where the BBU
and devices
interconnected
through this
dry contact are
installed
indoors
Differential mode
250 A
Applicable to
the scenario
where some
devices are
configured
remotely or the
scenario where
the BBU and
devices
interconnected
through this
port are placed
outdoors
(surge
protection
board
configured)
Differential mode
3 kA
Common mode
5 kA
Applicable to
the scenario
where the BBU
and devices
interconnected
through this
port are
installed
indoors
Differential mode
250 A
Common mode
250 A
Applicable to
the scenario
where some
devices are
configured
remotely or the
scenario where
the BBU and
devices
interconnected
Differential mode
3 kA
RS485
alarm port
Issue 05 (2014-08-30)
5 Product Specifications
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
90
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge
Protection
Mode
Specification
through this
port are placed
outdoors
(surge
protection
board
configured)
Common mode
5 kA
5.2 Technical Specifications of RFUs
This section describes the technical specifications of radio frequency units (RFUs), including
supported modes, frequency bands, RF specifications, surge protection specifications,
specifications of CPRI ports, and antenna capabilities.
5.2.1 DRFU Technical Specifications
The Double Radio Frequency Unit (DRFU) is a dual-transceiver radio frequency (RF) module,
which supports a maximum of two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by a DRFU.
Table 5-50 Modes and frequency bands supported by a DRFU
Issue 05 (2014-08-30)
Type
Mode
Frequency Band
(MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
DRFU
GSM
900 EGSM
880 to 915
925 to 960
900 PGSM
890 to 915
935 to 960
1800
1710 to 1785
1805 to 1880
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
91
3900 Series Base Station
Technical Description
5 Product Specifications
RF Specifications
Table 5-51 lists RF specifications of a DRFU.
NOTE
ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B receive
channels.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
92
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-51 RF specifications of a DRFU
Type
DRFU
RX
and
TX
Chan
nels
Capa
city
Receiver Sensitivity (dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitivi
ty with
Four
Antenna
s
2T2R
2
TRXs
-113.0
-115.8
-118.5
Output
Power
Power
Consum
ption
l Output
power
for the
DRFU
(GSM
(GBTS
), 900
MHz)
See the
DRFU
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
l Outpu
t
power
for the
DRFU
(GSM
(GBT
S),
1800
MHz)
For
typical PA
configurat
ions, see
Typical
Power
Configura
tion for
DRFU in
3900
Series
Base
Station
Initial
Configura
tion
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
93
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
l Two DRFU modules are required when four carriers are configured.
Table 5-52 Output power for the DRFU (GSM (GBTS), 900 MHz)
Mode
Total Number of GSM
Carriers
Output Power per GSM
Carrier (W)
GSM
1
45 (GMSK)/30 (8PSK)
1 (PBT)
71 (GMSK)/41 (8PSK)
2
45 (GMSK)/30 (8PSK)
4
20 (GMSK)/14 (8PSK)
Table 5-53 Output power for the DRFU (GSM (GBTS), 1800 MHz)
Mode
Total Number of GSM
Carriers
Output Power per GSM
Carrier (W)
GSM
1
40 (GMSK)/26 (8PSK)
1 (PBT)
63 (GMSK)/42 (8PSK)
2
40 (GMSK)/26 (8PSK)
4
18 (GMSK)/12 (8PSK)
Engineering Specifications
The following table lists the equipment specifications of a DRFU.
Table 5-54 Equipment specifications of a DRFU
Type
Dimension (H x W x D)
Weight (kg)
DRFU
9 U x 14 HP x 308.5 mm (with the
panel)
≤12
Table 5-55 lists the surge protection specifications of ports on a DRFU.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
94
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-55 Surge protection specifications of ports on a DRFU
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
Port for
transmitting
and
receiving
signals
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on a DRFU.
Table 5-56 Specifications of CPRI ports on a DRFU
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
DRFU
2
1.25
Star or chain
3
Antenna Capability
The following table shows antenna capability of a DRFU.
Table 5-57 Antenna capability of a DRFU
Issue 05 (2014-08-30)
Type
TMA Support
RET Antenna Support
DRFU
Not supported
AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l
An external bridge tap (BT) is required if a DRFU needs to be configured with a TMA.
l
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.2 GRFU Technical Specifications
The GSM Radio Frequency Unit (GRFU) is a multi-carrier radio frequency (RF) module, which
supports a maximum of six carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by a GRFU.
Table 5-58 Modes and frequency bands supported by a GRFU
Type
Mode
Frequency Band
(MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
GRFU V1
GSM
1900
1850 to 1890
1930 to 1970
1870 to 1910
1950 to 1990
900 PGSM
890 to 915
935 to 960
900 EGSM
880 to 915
925 to 960
1800
1710 to 1770
1805 to 1865
1725 to 1785
1820 to 1880
900
885 to 910
930 to 955
1800
1710 to 1755
1805 to 1850
GRFU V2
GRFU V2a
GSM
GSM
RF Specifications
Table 5-59 lists RF specifications of a GRFU.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-59 RF specifications of a GRFU
Type
GRFU
V1
RX and
TX
Chann
els
Capaci
ty
1T2R
6 TRXs
Receiver Sensitivity
(dBm)
Receiver
Sensitivity
with One
Antenna
Receiver
Sensitivity
with Two
Antennas
-113.0
-115.8
Output
Power
Power
Consumpti
on
The GRFU
V1 supports
the
maximum
power
configuratio
n 1 x 80 W.
The typical
configuratio
ns are as
follows:
See the
GRFU sheet
in 3900
Series Base
Station
Power
Consumptio
n
Specificatio
ns.
l Output
power
for the
GRFU
V1
(GSM
(GBTS),
1900
MHz)
l Output
power
for the
GRFU
V1
(GSM
(eGBTS)
, 1900
MHz)
GRFU
V2
Issue 05 (2014-08-30)
l 900 MHz
EGSM:
-113.3
l 900 MHz
EGSM:
-116.1
l 900 MHz
PGSM/
1800
MHz:
-113.5
l 900 MHz
PGSM/
1800
MHz:
-116.3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The GRFU
V2 supports
the
maximum
power
configuratio
n 1 x 80 W.
The typical
configuratio
ns are as
follows:
97
3900 Series Base Station
Technical Description
Type
GRFU
V2a
5 Product Specifications
RX and
TX
Chann
els
Capaci
ty
Receiver Sensitivity
(dBm)
Receiver
Sensitivity
with One
Antenna
Receiver
Sensitivity
with Two
Antennas
-113.5
-116.3
Output
Power
Power
Consumpti
on
l Output
power
for the
GRFU
V2/
GRFU
V2a
(GSM
(GBTS),
900
MHz)
l Output
power
for the
GRFU
V2/
GRFU
V2a
(GSM
(GBTS),
1800
MHz)
l Output
power
for the
GRFU
V2/
GRFU
V2a
(GSM
(eGBTS)
, 900
MHz)
l Output
power
for the
GRFU
V2/
GRFU
V2a
(GSM
(eGBTS)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
98
3900 Series Base Station
Technical Description
5 Product Specifications
Type
RX and
TX
Chann
els
Capaci
ty
Receiver Sensitivity
(dBm)
Receiver
Sensitivity
with One
Antenna
Output
Power
Receiver
Sensitivity
with Two
Antennas
Power
Consumpti
on
, 1800
MHz)
NOTE
l For the GRFU V1 operating in the 1900 MHz frequency band: The maximum output power of the RF
module in S1 configuration is 60 W. To achieve the maximum output power, you need to buy a license.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-60 Output power for the GRFU V1 (GSM (GBTS), 1900 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
60 (GMSK)/40 (8PSK)
60 (GMSK)/40 (8PSK)
2
40 (GMSK)/26 (8PSK)
40 (GMSK)/26 (8PSK)
3
27 (GMSK)/18 (8PSK)
31 (GMSK)/20 (8PSK)
4
20 (GMSK)/13 (8PSK)
27 (GMSK)/18 (8PSK)
5
12 (GMSK)/8 (8PSK)
20 (GMSK)/13 (8PSK)
6
10 (GMSK)/6.6 (8PSK)
16 (GMSK)/10 (8PSK)
Table 5-61 Output power for the GRFU V1 (GSM (eGBTS), 1900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (dBm)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (dBm)
GSM
1
47.8 (GMSK)/46.0
(8PSK)
47.8 (GMSK)/46.0
(8PSK)
2
46.0 (GMSK)/44.1
(8PSK)
46.0 (GMSK)/44.1
(8PSK)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
99
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (dBm)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (dBm)
3
44.3 (GMSK)/42.6
(8PSK)
44.9 (GMSK)/43.0
(8PSK)
4
43.0 (GMSK)/41.1
(8PSK)
44.3 (GMSK)/42.6
(8PSK)
5
40.8 (GMSK)/39.0
(8PSK)
43.0 (GMSK)/41.1
(8PSK)
6
40.0 (GMSK)/38.2
(8PSK)
42.0 (GMSK)/40.0
(8PSK)
NOTE
For the GRFU V2/GRFU V2a operating in the 900 MHz frequency band:
l
The maximum output power of the RF module in S1 configuration is 60 W. To achieve the maximum
output power, you need to buy a license.
l
After design optimization, the 8 phase shift keying (8PSK) and Gaussian minimum shift-frequency
keying (GMSK) modulation schemes enable the same output power for each carrier on the the RF
module when the S1, S2, or S3 configuration is used.
l
When the S4, S5, or S6 configuration is used, the license controlling the GBFD-118104 Enhanced
EDGE Coverage feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes
cannot enable the same output power for each carrier on the RF module.
Table 5-62 Output power for the GRFU V2/GRFU V2a (GSM (GBTS), 900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
60 (GMSK)/60 (8PSK)
60 (GMSK)/60 (8PSK)
2
40 (GMSK)/40 (8PSK)
40 (GMSK)/40 (8PSK)
3
27 (GMSK)/27 (8PSK)
31 (GMSK)/31 (8PSK)
4
20 (GMSK)/20 (8PSK)
27 (GMSK)/27 (8PSK)
5
16 (GMSK)/16 (8PSK)
20 (GMSK)/20 (8PSK)
6
12 (GMSK)/12 (8PSK)
20 (GMSK)/20 (8PSK)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
100
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-63 Output power for the GRFU V2/GRFU V2a (GSM (eGBTS), 900 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (dBm)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (dBm)
GSM
1
47.8 (GMSK)/47.8
(8PSK)
47.8 (GMSK)/47.8
(8PSK)
2
46.0 (GMSK)/46.0
(8PSK)
46.0 (GMSK)/46.0
(8PSK)
3
44.3 (GMSK)/44.3
(8PSK)
44.9 (GMSK)/44.9
(8PSK)
4
43.0 (GMSK)/43.0
(8PSK)
44.3 (GMSK)/44.3
(8PSK)
5
42.0 (GMSK)/42.0
(8PSK)
43.0 (GMSK)/43.0
(8PSK)
6
40.8 (GMSK)/40.8
(8PSK)
43.0 (GMSK)/43.0
(8PSK)
NOTE
For the GRFU V2/GRFU V2a operating in the 1800 MHz frequency band:
l
The maximum output power of the RF module in S1 configuration is 60 W. To achieve the maximum
output power, you need to buy a license.
l
When the S4, S5, or S6 configuration is used, the license controlling the GBFD-118104 Enhanced
EDGE Coverage feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes
cannot enable the same output power for each carrier on the RF module.
Table 5-64 Output power for the GRFU V2/GRFU V2a (GSM (GBTS), 1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
60 (GMSK)/40 (8PSK)
60 (GMSK)/40 (8PSK)
2
40 (GMSK)/26 (8PSK)
40 (GMSK)/26 (8PSK)
3
27 (GMSK)/18 (8PSK)
31 (GMSK)/20 (8PSK)
4
20 (GMSK)/20 (8PSK)
27 (GMSK)/27 (8PSK)
5
16 (GMSK)/16 (8PSK)
20 (GMSK)/20 (8PSK)
6
12 (GMSK)/12 (8PSK)
20 (GMSK)/20 (8PSK)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
101
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-65 Output power for the GRFU V2/GRFU V2a (GSM (eGBTS), 1800 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (dBm)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (dBm)
GSM
1
47.8 (GMSK)/46.0
(8PSK)
47.8 (GMSK)/46.0
(8PSK)
2
46.0 (GMSK)/44.1
(8PSK)
46.0 (GMSK)/44.1
(8PSK)
3
44.3 (GMSK)/42.6
(8PSK)
44.9 (GMSK)/43.0
(8PSK)
4
43.0 (GMSK)/43.0
(8PSK)
44.3 (GMSK)/44.3
(8PSK)
5
42.0 (GMSK)/42.0
(8PSK)
43.0 (GMSK)/43.0
(8PSK)
6
40.8 (GMSK)/40.8
(8PSK)
43.0 (GMSK)/43.0
(8PSK)
Engineering Specifications
The following table lists the equipment specifications of a GRFU.
Table 5-66 Equipment specifications of a GRFU
Type
Dimension (H x W x D)
Weight (kg)
GRFU V1,
GRFU V2, and
GRFU V2a
9 U x 14 HP x 308.5 mm (with the
panel)
≤12
Table 5-67 lists the surge protection specifications of ports on a GRFU.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
102
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-67 Surge protection specifications of ports on a GRFU
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Monitoring
port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
250 A
Common
mode
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on a GRFU.
Table 5-68 Specifications of CPRI ports on a GRFU
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
GRFU V1
2
1.25
Star or chain
2
GRFU V2 and
GRFU V2a
2
1.25 or 2.5
Star or chain
2
Antenna Capability
The following table shows antenna capability of a GRFU.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
103
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-69 Antenna capability of a GRFU
Type
TMA Support
RET Antenna Support
GRFU V1
Supported
AISG2.0 and AISG1.1
GRFU V2
Supported
AISG2.0 and AISG1.1
GRFU V2a
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.3 WRFU Technical Specifications
A WRFU working in UMTS mode supports a maximum of four carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by a WRFU.
Table 5-70 Modes and frequency bands supported by a WRFU
Type
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
Mode
80 W WRFU
2100
1920 to 1980
2110 to 2170
UMTS
850
824 to 835
869 to 880
UMTS
80 W WRFU
(Optimized)
2100
1920 to 1980
2110 to 2170
UMTS
40 W WRFU
2100
1920 to 1980
2110 to 2170
UMTS
RF Specifications
Table 5-71 lists RF specifications of a WRFU.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The receiver sensitivity on the UMTS 850 MHz frequency band is measured on its frequency sub-bands.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
104
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-71 RF specifications of a WRFU
Type
WRFU
RX and
TX
Channe
l
Capacit
y
1T2R
l 80 W
WRF
U: 4
carrie
rs
l 80 W
WRF
U
(Opti
mized
): 4
carrie
rs
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
l -125.
8
(210
0
MHz
)
l -128.
6
(2100
MHz
)
l -131.
3
(2100
MHz
)
l -128.
4
(850
MHz
)
l -131.
1
(850
MHz
)
l -125.
6
(850
MHz
)
l 40 W
WRF
U: 2
carrie
rs
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consu
mption
l The
80 W
WRF
U
supp
orts
the
maxi
mum
powe
r
confi
gurati
on 1 x
80 W
and
unev
en
powe
r
confi
gurati
ons.
For
typic
al
confi
gurati
ons,
see
the
table
Outp
ut
powe
r for
the
WRF
See the
WRFU
sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
105
3900 Series Base Station
Technical Description
Type
5 Product Specifications
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
Output
Power
Power
Consu
mption
U
(UM
TS,
850
MHz
/2100
MHz
, 80
W).
l The
80 W
WRF
U
(Opti
mize
d)
supp
orts
the
maxi
mum
powe
r
confi
gurati
on 1 x
80 W
and
unev
en
powe
r
confi
gurati
ons.
For
typic
al
confi
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
106
3900 Series Base Station
Technical Description
Type
5 Product Specifications
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
Output
Power
Power
Consu
mption
gurati
ons,
see
the
Outp
ut
powe
r for
the
WRF
U
(Opti
mize
d)
(UM
TS,
2100
MHz
,
80W)
table.
l The
40 W
WRF
U
supp
orts
the
maxi
mum
powe
r
confi
gurati
on 1 x
40
W.
For
typic
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
107
3900 Series Base Station
Technical Description
Type
5 Product Specifications
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
Output
Power
Power
Consu
mption
al
confi
gurati
ons,
see
the
Outp
ut
powe
r for
the
WRF
U
(UM
TS,
2100
MHz
, 40
W)
table.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-72 Output power for the WRFU (UMTS, 850 MHz/2100 MHz, 80W)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
2
40
3
20
4
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
108
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-73 Output power for the WRFU (Optimized)(UMTS, 2100 MHz, 80W)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
80
2
40
3
26
4
20
Table 5-74 Output power for the WRFU (UMTS, 2100 MHz, 40W)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
40
2
20
Engineering Specifications
The following table lists the equipment specifications of a WRFU.
Table 5-75 Equipment specifications of a WRFU
Type
Dimension (H x W x D)
Weight (kg)
WRFU
9 U x 14 HP x 308.5 mm (with the
panel)
11
Table 5-76 lists the surge protection specifications of ports on a WRFU.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-76 Surge protection specifications of ports on a WRFU
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power port
Applicable
to all
scenarios
Surge
2 kV (1.2/50 µs)
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
109
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Alarm port
Applicable
to all
scenarios
Surge
current
Specifications
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on a WRFU.
Table 5-77 Specifications of CPRI ports on a WRFU
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
WRFU
2
1.25 or 2.5
Star or chain
2 (serving the
same sector)
Antenna Capability
The following table lists the antenna capability of a WRFU.
Table 5-78 Antenna capability of a WRFU
Issue 05 (2014-08-30)
Type
TMA Support
RET Antenna Support
WRFU
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
110
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.4 WRFUa Technical Specifications
A WCDMA Radio Filter Unit type A (WRFUa) supports a maximum of four carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by a WRFUa.
Table 5-79 Modes and frequency bands supported by a WRFUa
Type
Mode
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
WRFUa
UMTS
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-80 lists RF specifications of a WRFUa.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
111
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-80 RF specifications of a WRFUa
Type
WRFUa
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
1T2R
4 carriers
-125.8
-128.6
-131.3
Output
Power
Power
Consu
mption
The
WRFUa
supports
the
maximu
m power
configur
ation 1 x
100 W.
and
uneven
power
configur
ations.
For
typical
configur
ations,
see the
Output
power
for the
WRFUa
(UMTS,
2100
MHz,
100W)
table.
See the
WRFUa
sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
112
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-81 Output power for the WRFUa (UMTS, 2100 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
80
2
50
3
33
4
25
Engineering Specifications
The following table lists the equipment specifications of a WRFUa.
Table 5-82 Equipment specifications of a WRFUa
Type
Dimension (H x W x D)
Weight (kg)
WRFUa
9 U x 14 HP x 308.5 mm (with the
panel)
11
Table 5-83 lists the surge protection specifications of ports on a WRFUa.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-83 Surge protection specifications of ports on a WRFUa
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Surge
current
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
113
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specifications
RF port
Applicable
to all
scenarios
Surge
current
Differential
mode
8 kA
Common
mode
40 kA
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Alarm port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on a WRFUa.
Table 5-84 Specifications of CPRI ports on a WRFUa
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
WRFUa
2
1.25 or 2.5
Star or chain
2 (serving the
same sector)
Antenna Capability
The following table lists the antenna capability of a WRFUa.
Table 5-85 Antenna capability of a WRFUa
Type
TMA Support
RET Antenna Support
WRFUa
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.5 WRFUd Technical Specifications
A WCDMA Radio Filter Unit type D (WRFUd) supports a maximum of six carriers.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
114
3900 Series Base Station
Technical Description
5 Product Specifications
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by a WRFUd.
Table 5-86 Modes and frequency bands supported by a WRFUd
Type
Mode
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
WRFUd
UMTS
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-87 lists RF specifications of a WRFUd.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
115
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-87 RF specifications of a WRFUd
Type
WRFUd
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
2T2R
l With
MIM
O: 4
carrie
rs
-126.1
-128.9
-131.6
l With
out
MIM
O: 6
carrie
rs
Output
Power
Power
Consu
mption
The
WRFUd
supports
the
maximu
m power
configur
ation 2 x
60 W,
configur
ations of
singleoutput,
MIMO,
or the
combinat
ion of the
two, and
uneven
power
configur
ations.
See the
WRFUd
sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
l For
typic
al
confi
gurati
ons in
singl
eoutpu
t or
MIM
O
scena
rios,
see
the
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
116
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
table
Outp
ut
powe
r for
the
WRF
Ud
(UM
TS,
2100
MHz
).
l For
typic
al
confi
gurati
ons in
hybri
d
confi
gurati
on
scena
rios,
see
the
table
Carr
ier
comb
inati
ons
supp
orted
by
WRF
Ud in
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
hybri
d
confi
gurat
ions.
In
this
scena
rio,
one
WRF
Ud
supp
orts a
maxi
mum
of six
carrie
rs.
Each
trans
mit
chan
nel
supp
orts a
maxi
mum
of
four
carrie
rs and
the
maxi
mum
outpu
t
powe
r of
each
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
118
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
trans
mit
chan
nel is
60 W.
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
WRFUd
in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-88 Output power for the WRFUd (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS Output Power per UMTS
Carriers
Carrier (W)
UMTS
1
Configured in one PA: 60
2
Configured in one PA: 30
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS Output Power per UMTS
Carriers
Carrier (W)
2
Configured in two PAs: 60
3
Configured in one PA: 20
4
Configured in one PA: 15
4
Configured in two PAs: 30
6
Configured in two PAs: 20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 30
3 (MIMO)
2 x 20
4 (MIMO)
2 x 15
Table 5-89 Carrier combinations supported by WRFUd in hybrid configurations
Number of MIMO Carriers
Number of Single-Output Carriers
1
5
2
4
3
2
Engineering Specifications
The following table lists the equipment specifications of a WRFUd.
Table 5-90 Equipment specifications of a WRFUd
Type
Dimension (H x W x D)
Weight (kg)
WRFUd
9 U x 14 HP x 308.5 mm (with the
panel)
12
Table 5-91 lists the surge protection specifications of ports on a WRFUd.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
120
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-91 Surge protection specifications of ports on a WRFUd
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Alarm port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on a WRFUd.
Table 5-92 Specifications of CPRI ports on a WRFUd
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
WRFUd
2
1.25 or 2.5
Star
N/A
Antenna Capability
The following table lists the antenna capability of a WRFUd.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
121
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-93 Antenna capability of a WRFUd
Type
TMA Support
RET Antenna Support
WRFUd
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.6 WRFUe Technical Specifications
A WCDMA Radio Filter Unit type E (WRFUe) supports a maximum of six carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by a WRFUe.
Table 5-94 Modes and frequency bands supported by a WRFUe
Type
Mode
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
WRFUe
UMTS
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-95 lists RF specifications of a WRFUe.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
122
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-95 RF specifications of a WRFUe
Type
WRFUe
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
2T2R
l With
MIM
O: 4
carrie
rs
-126.1
-128.9
-131.6
l With
out
MIM
O: 6
carrie
rs
Output
Power
Power
Consu
mption
The
WRFUe
supports
the
maximu
m power
configur
ation 2 x
80 W,
configur
ations of
singleoutput,
MIMO,
or the
combinat
ion of the
two, and
uneven
power
configur
ations.
See the
WRFUe
sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
l For
typic
al
confi
gurati
ons in
singl
eoutpu
t or
MIM
O
scena
rios,
see
the
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
table
Outp
ut
powe
r for
the
WRF
Ue
(UM
TS,
2100
MHz
).
l For
typic
al
confi
gurati
ons in
hybri
d
confi
gurati
on
scena
rios,
see
the
table
Carr
ier
comb
inati
ons
supp
orted
by
WRF
Ue in
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
124
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
hybri
d
confi
gurat
ions.
In
this
scena
rio,
one
WRF
Ue
supp
orts a
maxi
mum
of six
carrie
rs.
Each
trans
mit
chan
nel
supp
orts a
maxi
mum
of
four
carrie
rs and
the
maxi
mum
outpu
t
powe
r of
each
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
125
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
trans
mit
chan
nel is
80 W.
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
WRFUe
in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-96 Output power for the WRFUe (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 80
2
Configured in one PA: 40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
126
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
2
Configured in two PAs: 80
3
Configured in one PA: 26
4
Configured in one PA: 20
4
Configured in two PAs: 40
6
Configured in two PAs: 26
1 (MIMO)
2 x 40
2 (MIMO)
2 x 40
3 (MIMO)
2 x 26
4 (MIMO)
2 x 20
Table 5-97 Carrier combinations supported by WRFUe in hybrid configurations
Number of MIMO Carriers
Number of Single-Output Carriers
1
5
2
4
3
2
Engineering Specifications
Table 5-98 lists the engineering specifications of a WRFUe.
Table 5-98 Equipment specifications of a WRFUe
Type
Dimension (H x W x D)
Weight (kg)
WRFUe
9 U x 14 HP x 308.5 mm (with the
panel)
12
Table 5-99 lists the surge protection specifications of ports on a WRFUe.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
127
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-99 Surge protection specifications of ports on a WRFUe
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Alarm port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on a WRFUe.
Table 5-100 Specifications of CPRI ports on a WRFUe
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
WRFUe
2
1.25 or 2.5
Star
N/A
Antenna Capability
The following table lists the antenna capability of a WRFUe.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
128
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-101 Antenna capability of a WRFUe
Type
TMA Support
RET Antenna Support
WRFUe
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.7 CRFUd Technical Specifications
An CDMA & LTE radio frequency unit type D (CRFUd) works in frequency division duplex
(FDD) mode.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an CRFUd.
Table 5-102 Modes and frequency bands supported by an CRFUd
Type
Mode
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
CRFUd
LTE FDD
AWS (band 4)
1710 to 1755
2110 to 2155
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-103 lists radio frequency (RF) specifications of an CRFUd.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
129
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-103 RF specifications of an CRFUd
Type
CRF
Ud
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
l AWS: Two
carriers.
The
bandwidth
per carrier
is 1.4, 3, 5,
10, 15, or 20
MHz; the
total
bandwidth
between the
maximum
frequency
and the
minimum
frequency
of the
spectrums
for two
carriers
does not
exceed 45
MHz.
Receiver Sensitivity
(dBm)
1T1R
1T2R
l AWS:
-106.5
l AWS:
-109.3
l 2100
MHz:
-106.3
l 2100
MHz:
-109.1
l 2100 MHz:
Two
carriers.
The
bandwidth
per carrier
is 5, 10, 15,
or 20 MHz;
the total
bandwidth
between the
maximum
frequency
and the
minimum
frequency
of the
spectrums
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpt
ion
The CRFUd
supports the
maximum
power
configurati
on 2 x 60 W.
The typical
configurati
ons are as
follows:
See the
CRFUd
sheet in
3900 Series
Base
Station
Power
Consumpti
on
Specificatio
ns.
l Output
power
for the
CRFUd
(LTE
FDD,
AWS)
l Output
power
for the
CRFUd
(LTE
FDD,
2100
MHz)
For typical
PA
configurati
ons, see
Typical
Power
Configurati
on for
CRFUd in
3900 Series
Base
Station
Initial
Configurati
on Guide
130
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Trans
mit
and
Recei
ve
Chan
nels
Capacity
Receiver Sensitivity
(dBm)
1T1R
Output
Power
1T2R
for two
carriers
does not
exceed 60
MHz.
Power
Consumpt
ion
.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-104 Output power for the CRFUd (LTE FDD, AWS)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5
1 (MIMO)
2 x 60
10, 15, 20
2 (MIMO)
2 x 30
5, 10, 15, 20
2 (MIMO)
l carrier 1: 2 x 20
l carrier 1: 5,10
l carrier 2: 2 x 40
l carrier 2: 10,20
l carrier 1: 2 x 15
l carrier 1: 5
l carrier 2: 2 x 45
l carrier 2: 15
l carrier 1: 2 x 12
l carrier 1: 5
l carrier 2: 2 x 48
l carrier 2: 20
l carrier 1: 2 x 24
l carrier 1: 10
l carrier 2: 2 x 36
l carrier 2: 15
l carrier 1: 2 x 26
l carrier 1: 15
l carrier 2: 2 x 34
l carrier 2: 20
2 (MIMO)
2 (MIMO)
2 (MIMO)
2 (MIMO)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
131
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-105 Output power for the CRFUd (LTE FDD, 2100 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 10
5,10,15,20
1 (MIMO)
2 x 20
5,10,15,20
1 (MIMO)
2 x 40
10,15,20
1 (MIMO)
2 x 60
15,20
2 (MIMO)
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 10
l carrier2: 5
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 20
l carrier2: 10
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 30
l carrier2: 15
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 40
l carrier2: 20
2 (MIMO)
2 (MIMO)
2 (MIMO)
Engineering Specifications
The following table describes the equipment specifications of the CRFUd.
Table 5-106 Equipment specifications of an CRFUd
Type
Dimensions (H x W x D)
Weight (kg)
CRFUd
9 U x 14 HP x 308.5 mm (with
the panel)
12
Table 5-107 lists the surge protection specifications of ports on an CRFUd.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
132
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-107 Surge protection specifications of ports on an CRFUd
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Monitoring
port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an CRFUd.
Table 5-108 Specifications of CPRI ports on an CRFUd
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
CRFUd
2
1.25, 2.5, or 4.9
Star
N/A
Antenna Capability
The following table provides antenna capability of an CRFUd.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
133
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-109 Antenna capability of an CRFUd
Type
TMA Support
Supported RET Antennas
CRFUd
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.8 CRFUe Technical Specifications
An CDMA & LTE radio frequency unit type E (CRFUe) works in frequency division duplex
(FDD) mode.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an CRFUe.
Table 5-110 Modes and frequency bands supported by an CRFUe
Type
Mode
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
CRFUe
LTE FDD
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-111 lists radio frequency (RF) specifications of an CRFUe.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
134
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-111 RF specifications of an CRFUe
Type
CRF
Ue
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers.
The bandwidth
per carrier is 5,
10, 15, or 20
MHz; the total
bandwidth
between the
maximum
frequency and
the minimum
frequency of
the spectrums
for two carriers
does not exceed
60 MHz.
Receiver Sensitivity
(dBm)
1T1R
1T2R
-106.3
-109.1
Output
Power
Power
Consumpt
ion
The CRFUe
supports the
maximum
power
configurati
on 2 x 80 W.
For typical
configurati
ons, see the
Output
power for
the CRFUe
(LTE FDD,
2100 MHz)
table.
See the
CRFUe
sheet in
3900 Series
Base
Station
Power
Consumpti
on
Specificatio
ns.
For typical
PA
configurati
ons, see
Typical
Power
Configurati
on for
CRFUe in
3900 Series
Base
Station
Initial
Configurati
on Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
135
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-112 Output power for the CRFUe (LTE FDD, 2100 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 10
5,10,15,20
1 (MIMO)
2 x 20
5,10,15,20
1 (MIMO)
2 x 40
10,15,20
1 (MIMO)
2 x 60
15,20
1 (MIMO)
2 x 80
15,20
2 (MIMO)
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 10
l carrier2: 5
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 20
l carrier2: 10
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 30
l carrier2: 15
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 40
l carrier2: 20
l carrier1: 2 x 40
l carrier1: 20
l carrier2: 2 x 40
l carrier2: 20
2 (MIMO)
2 (MIMO)
2 (MIMO)
2 (MIMO)
Engineering Specifications
The following table describes the equipment specifications of the CRFUe.
Table 5-113 Equipment specifications of an CRFUe
Type
Dimensions (H x W x D)
Weight (kg)
CRFUe
9 U x 14 HP x 308.5 mm (with
the panel)
12
Table 5-114 lists the surge protection specifications of ports on an CRFUe.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
136
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-114 Surge protection specifications of ports on an CRFUe
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Monitoring
port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an CRFUe.
Table 5-115 Specifications of CPRI ports on an CRFUe
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
CRFUe
2
1.25, 2.5, or 4.9
Star
N/A
Antenna Capability
The following table provides antenna capability of an CRFUe.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
137
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-116 Antenna capability of an CRFUe
Type
TMA Support
Supported RET Antennas
CRFUe
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.9 LRFU Technical Specifications
An LTE radio frequency unit (LRFU) works in frequency division duplex (FDD) mode.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an LRFU.
Table 5-117 Modes and frequency bands supported by an LRFU
Type
Mode
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
LRFU
LTE FDD
2600 (band 7)
Band C: 2500 to
2520
Band C: 2620 to
2640
Band D: 2510 to
2560
Band D: 2630 to
2680
Band E: 2550 to
2570
Band E: 2670 to
2690
RF Specifications
Table 5-118 lists radio frequency (RF) specifications of an LRFU.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
138
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-118 RF specifications of an LRFU
Typ
e
LRF
U
Trans
mit
and
Receiv
e
Chann
els
Capacity
2T2R
One carrier with a
bandwidth of 5,
10, 15, or 20
MHz.
NOTE
The
LRFU
does
not
suppor
t the
1T2R
config
uratio
n.
Receiver
Sensitivity
(dBm)
1T1R
1T2R
-105.8
-108.6
Output
Power
Power
Consumpti
on
The LRFU
supports the
maximum
power
configuration
2 x 40 W.
See the LRFU
sheet in 3900
Series Base
Station Power
Consumption
Specification
s.
For typical
configuration
s, see the
Output
power for
the LRFU
(LTE FDD,
2600 MHz)
table.
For typical
PA
configuration
s, see Typical
Power
Configuratio
n for LRFU in
3900 Series
Base Station
Initial
Configuratio
n Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-119 Output power for the LRFU (LTE FDD, 2600 MHz)
Issue 05 (2014-08-30)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
139
3900 Series Base Station
Technical Description
5 Product Specifications
Engineering Specifications
The following table describes the equipment specifications of the LRFU.
Table 5-120 Equipment specifications of an LRFU
Type
Dimensions (H x W x D)
Weight (kg)
LRFU
9 U x 14 HP x 308.5 mm (with
the panel)
12
Table 5-121 lists the surge protection specifications of ports on an LRFU.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-121 Surge protection specifications of ports on an LRFU
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
Monitoring
port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an LRFU.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
140
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-122 Specifications of CPRI ports on an LRFU
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
LRFU
2
1.25 or 2.5
Star
N/A
Antenna Capability
The following table provides antenna capability of an LRFU.
Table 5-123 Antenna capability of an LRFU
Type
TMA Support
Supported RET Antennas
LRFU
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.10 LRFUe Technical Specifications
An LTE radio frequency unit type E (LRFUe) works in frequency division duplex (FDD) mode.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an LRFUe.
Table 5-124 Modes and frequency bands supported by an LRFUe
Type
Mode
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
LRFUe
LTE FDD
DD 800 (band 20)
832 to 862
791 to 821
700 (band 28)
Band A: 703 to
743
Band A: 758 to
798
Band B: 718 to
748
Band B: 773 to
803
RF Specifications
Table 5-125 lists radio frequency (RF) specifications of an LRFUe.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
141
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
142
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-125 RF specifications of an LRFUe
Type
LRF
Ue
Tra
nsm
it
and
Rec
eive
Cha
nnel
s
Capacity
2T2
R
Two carriers.
The bandwidth
per carrier is 5,
10, 15, or 20
MHz.
l DD 800MHz:
The total
bandwidth
between the
maximum
frequency
and the
minimum
frequency of
the spectrums
for two
carriers does
not exceed 30
MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivit
y with
One
Antenna
Receiver
Sensitivit
y with
Two
Antennas
l DD
800MH
z:
-106.3
l DD
800MH
z:
-109.1
l 700MH
z:
-106.5
l 700MH
z:
-109.3
l 700MHz:
The total
bandwidth
between the
maximum
frequency
and the
minimum
frequency of
the spectrums
for two
carriers does
not exceed 25
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpt
ion
l DD
800MH
z: The
LRFUe
supports
the
maximu
m power
configur
ation 2 x
60 W.
For
typical
configur
ations,
see the
Output
power
for the
LRFUe
(LTE
FDD,
DD
800MH
z) table.
See the
LRFUe
sheet in
3900 Series
Base
Station
Power
Consumpti
on
Specificatio
ns.
l 700MH
z: The
LRFUe
supports
the
maximu
m power
configur
ation 2 x
80 W.
For
typical
configur
ations,
143
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Tra
nsm
it
and
Rec
eive
Cha
nnel
s
Capacity
Receiver Sensitivity
(dBm)
Receiver
Sensitivit
y with
One
Antenna
Output
Power
Receiver
Sensitivit
y with
Two
Antennas
Power
Consumpt
ion
see the
Output
power
for the
LRFUe
(LTE
FDD,
700MH
z) table.
For typical
PA
configurati
ons, see
Typical
Power
Configurati
on for
LRFUe in
3900 Series
Base
Station
Initial
Configurati
on Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-126 Output power for the LRFUe (LTE FDD, DD 800 MHz)
Issue 05 (2014-08-30)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 20
5
1 (MIMO)
2 x 40
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
144
3900 Series Base Station
Technical Description
5 Product Specifications
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
1 (MIMO)
2 x 60
15, 20
2 (MIMO)
2 x 30
10
Table 5-127 Output power for the LRFUe (LTE FDD, 700 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1(MIMO)
2 x 80
10, 15, 20
1(MIMO)
2 x 60
10, 15, 20
1(MIMO)
2 x 40
5, 10, 15, 20
2(MIMO)
l carrier1: 2 x 30
5, 10
l carrier2: 2 x 30
2(MIMO)
2(MIMO)
2(MIMO)
2(MIMO)
2(MIMO)
l carrier1: 2 x 20
l carrier1: 5
l carrier2: 2 x 40
l carrier2: 10
l carrier1: 2 x 15
l carrier1: 5
l carrier2: 2 x 45
l carrier2: 15
l carrier1: 2 x 12
l carrier1: 5
l carrier2: 2 x 48
l carrier2: 20
l carrier1: 2 x 24
l carrier1: 10
l carrier2: 2 x 36
l carrier2: 15
l carrier1: 2 x 20
5, 10
l carrier2: 2 x 20
2(MIMO)
2(MIMO)
2(MIMO)
2(MIMO)
Issue 05 (2014-08-30)
l carrier1: 2 x 13
l carrier1: 5
l carrier2: 2 x 27
l carrier2: 10
l carrier1: 2 x 10
l carrier1: 5
l carrier2: 2 x 30
l carrier2: 15
l carrier1: 2 x 8
l carrier1: 5
l carrier2: 2 x 32
l carrier2: 20
l carrier1: 2 x 16
l carrier1: 10
l carrier2: 2 x 24
l carrier2: 15
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
145
3900 Series Base Station
Technical Description
5 Product Specifications
Engineering Specifications
The following table describes the equipment specifications of the LRFUe.
Table 5-128 Equipment specifications of an LRFUe
Type
Dimensions (H x W x D)
Weight (kg)
LRFUe
9 U x 14 HP x 308.5 mm (with
the panel)
12
Table 5-129 lists the surge protection specifications of ports on an LRFUe.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-129 Surge protection specifications of ports on an LRFUe
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
Monitoring
port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an LRFUe.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
146
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-130 Specifications of CPRI ports on an LRFUe
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
LRFUe
2
1.25, 2.5, or 4.9
Star
N/A
Antenna Capability
The following table provides antenna capability of an LRFUe.
Table 5-131 Antenna capability of an LRFUe
Type
TMA Support
Supported RET Antennas
LRFUe
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.11 MRFU Technical Specifications
Multi-Mode Radio Frequency Units (MRFUs) are classified into MRFU V1, MRFU V2, and
MRFU V2a modules. Using the software-defined radio (SDR) technology, MRFUs can work
in different modes with different configurations.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an MRFU.
Table 5-132 Modes and frequency bands supported by an MRFU
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
MRFU V1
900 PGSM
890 to 915
935 to 960
GSM, UMTS,
and GU
1800
1710 to 1755
1805 to 1850
1740 to 1785
1835 to 1880
GSM, LTE FDD,
and GL
1850 to 1890
1930 to 1970
1870 to 1910
1950 to 1990
824 to 846.5
869 to 891.5
1900
MRFU V2
Issue 05 (2014-08-30)
850
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GSM and UMTS
GSM, UMTS,
and GU
147
3900 Series Base Station
Technical Description
Type
MRFU
V2a
5 Product Specifications
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
900 PGSM
890 to 915
935 to 960
900 EGSM
880 to 915
925 to 960
GSM, UMTS,
LTE FDD, GU,
and GL
1800
1710 to 1770
1805 to 1865
1725 to 1785
1820 to 1880
1710 to 1785
1805 to 1880
900
885 to 910
930 to 955
GSM, UMTS,
LTE FDD, GU,
and GL
1800
1710 to 1755
1805 to 1850
GSM, LTE FDD,
and GL
GSM, LTE FDD,
and GL
RF Specifications
Table 5-133 lists radio frequency (RF) specifications of an MRFU.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l The GSM receiver sensitivity is measured, as recommended in 3GPP TS 51.021, over the central band at
the antenna connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does
not exceed 2%. The central band is the 80% of the full band.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The MRFU that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies with
the EN 301 502 V9.2.1 standard. The MRFU that works in GSM mode and operates in the 850 or 1900 MHz
frequency band complies with the 3GPP TS 45.005 V10.2.0 and 3GPP TS 51.021 V10.2.0 standards.
l The MRFU that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the 900
or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104 standards.
The MRFU that works in UMTS, LTE FDD, or MSR mode and operates in the 850 or 1900 MHz frequency
band complies with the 3GPP TS 37.104 V10.4.0 and TS 37.141 V10.4.0 standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
148
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-133 RF specifications of an MRFU
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receiver
Sensitivi
ty with
Four
Antenna
s
MR
FU
V1
1T
2R
GSM: 6
TRXs
GSM:
-113.0
GSM:
-115.8
UMTS: 4
carriers
UMTS:
-125.5
UMTS:
-128.3
GSM:
-118.5
(theoretica
l value)
LTE
FDD: 1
carrier
with a
bandwidt
h of 3, 5,
or 10
MHz
LTE
FDD:
-106.3
LTE
FDD:
-109.1
UMTS:
-131.0
LTE FDD:
-111.8
Output
Power
Power
Consumpti
on
The MRFU V1
supports the
maximum
power
configuration 1
x 80 W. The
typical
configurations
are as follows:
See the
MRFU sheet
in 3900
Series Base
Station
Power
Consumptio
n
Specificatio
ns.
l Output
power for
the MRFU
V1 (GSM,
900 MHz/
1800 MHz/
1900 MHz)
l Output
power for
the MRFU
V1 (UMTS,
900 MHz/
1900 MHz)
l Output
power for
the MRFU
V1 (LTE
FDD, 1800
MHz)
l Output
power for
the MRFU
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
149
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receiver
Sensitivi
ty with
Four
Antenna
s
Output
Power
Power
Consumpti
on
V1 (GU
MSR, 900
MHz)
l Output
power for
the MRFU
V1 (GL
MSR, 1800
MHz)
MR
FU
V2
1T
2R
GSM: 6
TRXs
UMTS: 4
carriers
LTE
FDD:
l 900
MHz:
1
carrie
r with
a
band
width
of 1.4,
3, 5,
10,
15, or
20
MHz
l 1800
MHz:
Issue 05 (2014-08-30)
GSM:
GSM:
GSM:
l 850
MHz
:
-113.
0
l 850
MHz
:
-115.
8
l 900
MHz
PGS
M:
-113.
5
l 900
MHz
PGS
M:
-116.
3
l 850
MHz:
-118.5
(theore
tical
value)
l 900
MHz
EGS
M:
-113.
3
l 900
MHz
EGS
M:
-116.
1
l 1800
MHz
:
-113.
8
l 1800
MHz
:
-116.
6
l 900
MHz
PGSM
: -119
(theore
tical
value)
l 900
MHz
EGSM
:
-118.8
(theore
tical
value)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The MRFU V2/
MRFU V2a
supports the
maximum
power
configuration 1
x 80 W. The
typical
configurations
are as follows:
l Output
power for
the MRFU
V2/MRFU
V2a (GSM,
850 MHz/
900 MHz/
1800 MHz)
l Output
power for
the MRFU
V2/MRFU
V2a
150
3900 Series Base Station
Technical Description
Ty
pe
MR
FU
Issue 05 (2014-08-30)
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
1
carrie
r with
a
band
width
of 5,
10,
15, or
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receiver
Sensitivi
ty with
Four
Antenna
s
UMTS:
UMTS:
l 850
MHz
:
-125.
0
l 850
MHz
:
-127.
8
l 1800
MHz:
-119.3
(theore
tical
value)
l 900
MHz
PGS
M:
-125.
5
l 900
MHz
PGS
M:
-128.
3
l 900
MHz
EGS
M:
-125.
3
l 900
MHz
EGS
M:
-128.
1
LTE
FDD:
LTE
FDD:
l 900
MHz
PGS
M:
-106.
3
l 900
MHz
PGS
M:
-109.
1
l 900
MHz
EGS
M:
-106.
1
l 900
MHz
EGS
M:
-108.
9
UMTS:
l 850
MHz:
-130.5
l 900
MHz
PGSM
:
-131.0
l 900
MHz
EGSM
:
-130.8
LTE FDD:
l 900
MHz
PGSM
:
-111.8
Output
Power
Power
Consumpti
on
(UMTS,
850 MHz/
900 MHz)
l Output
power for
the MRFU
V2/MRFU
V2a (LTE
FDD, 900
MHz/1800
MHz)
l Output
power for
the MRFU
V2/MRFU
V2a (GU
MSR, 850
MHz/900
MHz)
l Output
power for
the MRFU
V2/MRFU
V2a (GL
MSR, 900
l 900
MHz
EGSM
:
-111.6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
151
3900 Series Base Station
Technical Description
Ty
pe
V2
a
Issue 05 (2014-08-30)
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
20
MHz
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receiver
Sensitivi
ty with
Four
Antenna
s
l 1800
MHz
:
-106.
6
l 1800
MHz
:
-109.
4
l 1800
MHz:
-112.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpti
on
MHz/1800
MHz)
152
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the MRFU working in GSM mode: The maximum output power of the RF module in S1 configuration
is 60 W. To achieve the maximum output power, you need to buy a license.
l For the MRFU V2/MRFU V2a working in GSM mode and operating in the 900 MHz frequency band: After
design optimization, the 8 phase shift keying (8PSK) and Gaussian minimum shift-frequency keying
(GMSK) modulation schemes enable the same output power for each carrier on the the RF module when
the S1, S2, or S3 configuration is used. When the S4, S5, or S6 configuration is used, the license controlling
the GBFD-118104 Enhanced EDGE Coverage feature must be obtained. Otherwise, the 8PSK and GMSK
modulation schemes cannot enable the same output power for each carrier on the RF module.
l For the MRFU V2/MRFU V2a working in GSM mode and operating in the 1800 MHz frequency band:
When the S4, S5, or S6 configuration is used, the license controlling the GBFD-118104 Enhanced EDGE
Coverage feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes cannot enable
the same output power for each carrier on the RF module.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-134 Output power for the MRFU V1 (GSM, 900 MHz/1800 MHz/1900 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
60
60
2
40
40
3
27
31
4
20
27
5
12
20
6
10
16
NOTE
(a) indicates that only hardware is available for the configuration.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
153
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-135 Output power for the MRFU V1 (UMTS, 900 MHz/1900 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
2
40
3(a)
27(a)
4(a)
20(a)
Table 5-136 Output power for the MRFU V1 (LTE FDD, 1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1
60
3, 5, 10
Table 5-137 Output power for the MRFU V1 (GU MSR, 900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
1
40
40
1
2
40
20
2
1
20
40
2
2
20
20
3
1
20
10
3
1
16
20
3
2
16
10
3
2
10
20
4
1
12
20
4
2
10
10
5
1
10
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
154
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-138 Output power for the MRFU V1 (GL MSR, 1800 MHz)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1
40
40
3, 5, 10
2
1
20
40
3, 5, 10
3
1
20
10
3, 5, 10
3
1
16
20
3, 5, 10
4
1
15
10
3, 5, 10
4
1
12
20
3, 5, 10
5
1
10
20
3, 5, 10
Table 5-139 Output power for the MRFU V2/MRFU V2a (GSM, 850 MHz/900 MHz/1800
MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
60
60
2
40
40
3
27
31
4
20
27
5
16
20
6
12
20
NOTE
Issue 05 (2014-08-30)
l
(a) indicates that only hardware is available for the configuration.
l
Two MRFU V2 or MRFU V2a modules are required to support UMTS MIMO.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
155
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-140 Output power for the MRFU V2/MRFU V2a (UMTS, 850 MHz/900 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
2
40
3(a)
27(a)
4(a)
20(a)
1 (MIMO)
2 x 60
2 (MIMO)
2 x 40
3 (MIMO)(a)
2 x 27(a)
4 (MIMO)(a)
2 x 20(a)
Table 5-141 Output power for the MRFU V2/MRFU V2a (LTE FDD, 900 MHz/1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier (MHz)
LTE FDD
1
60
l 900 MHz: 1.4, 3, 5,
10, 15, 20
l 1800 MHz: 5, 10,
15, 20
Table 5-142 Output power for the MRFU V2/MRFU V2a (GU MSR, 850 MHz/900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
1
40
40
2
1
20
40
2
1
30
20
3
1
20
20
4
1
12
20
5
1
10
20
1
2
40
20
2
2
20
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
156
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
3
2
16
10
3
2
10
20
4
2
10
10
Table 5-143 Output power for the MRFU V2/MRFU V2a (GL MSR, 900 MHz/1800 MHz)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier
(W)
Bandwidth
of LTE FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1
40
30
l 900 MHz:
1.4, 3, 5,
10, 15
l 1800
MHz: 5,
10, 15
1
1
30
40
l 900 MHz:
1.4, 3, 5,
10, 15
l 1800
MHz: 5,
10, 15
2
1
27
20
l 900 MHz:
1.4, 3, 5,
10, 15
l 1800
MHz: 5,
10, 15
2
1
20
40
l 900 MHz:
1.4, 3, 5,
10, 15
l 1800
MHz: 5,
10, 15
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
157
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier
(W)
Bandwidth
of LTE FDD
Carrier
(MHz)
3
1
20
20
l 900 MHz:
1.4, 3, 5,
10, 15
l 1800
MHz: 5,
10, 15
4
1
12
20
l 900 MHz:
1.4, 3, 5,
10
l 1800
MHz: 5,
10
4
1
15
10
l 900 MHz:
1.4, 3, 5,
10
l 1800
MHz: 5,
10
5
1
10
20
l 900 MHz:
1.4, 3, 5,
10
l 1800
MHz: 5,
10
Engineering Specifications
The following table lists the equipment specifications of an MRFU.
Table 5-144 Equipment specifications of an MRFU
Type
Dimension (H x W x D)
Weight (kg)
MRFU V1,
MRFU V2, and
MRFU V2a
9 U x 14 HP x 308.5 mm (with the
panel)
12
Table 5-145 lists the surge protection specifications of ports on an MRFU.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
158
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-145 Surge protection specifications of ports on an MRFU
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Alarm port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an MRFU.
Table 5-146 Specifications of CPRI ports on an MRFU
Issue 05 (2014-08-30)
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
MRFU V1
2
1.25
CPRI MUX:
MRFU V2 and
MRFU V2a
2
1.25 or 2.5
Star, chain, or
dual-star
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l GU: 6
l GL: 4
159
3900 Series Base Station
Technical Description
5 Product Specifications
Antenna Capability
The following table provides the antenna capability of an MRFU.
Table 5-147 Antenna capability of an MRFU
Type
TMA Support
Supported RET Antennas
MRFU V1
Supported
AISG2.0 and AISG1.1
MRFU V2 and MRFU
V2a
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.12 MRFUd Technical Specifications
Using the software-defined radio (SDR) technology, Multi-Mode Radio Frequency Unit Type
D (MRFUd) modules can work in different modes with different configurations.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an MRFUd.
Table 5-148 Modes and frequency bands supported by an MRFUd
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
MRFUd
900 PGSM
890 to 915
935 to 960
900 EGSM
880 to 915
925 to 960
GSM, UMTS,
LTE FDD, GU,
GL, and UL
1800
1710 to 1785
1805 to 1880
GSM, UMTS,
LTE FDD, GU,
and GL
RF Specifications
Table 5-149 lists radio frequency (RF) specifications of an MRFUd.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
160
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity is measured, as recommended in 3GPP TS 51.021, over the central band at
the antenna connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does
not exceed 2%. The central band is the 80% of the full band.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The MRFUd that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies with
the EN 301 502 V9.2.1 standard .
l The MRFUd that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the 900
or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104 standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
161
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-149 RF specifications of an MRFUd
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitivi
ty with
Four
Antenna
s
MR
FU
d
2T
2R
GSM: 8
TRXs
GSM:
GSM:
GSM:
l 900
MHz:
-113.
7
l 900
MHz:
-116.5
l 900
MHz:
-119.2
(theor
etical
value)
UMTS:
l Witho
ut
MIM
O: 6
carrie
rs
l 1800
MHz:
-114.
0
l With
MIM
O: 4
carrie
rs
UMTS:
LTE
FDD: 2
carriers.
The
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz.
l 1800
MHz:
-126.
1
l 900
MHz:
-125.
8
LTE
FDD:
l 900
MHz:
-106.
3
l 1800
MHz:
-106.
6
Issue 05 (2014-08-30)
l 1800
MHz:
-116.8
UMTS:
l 900
MHz:
-128.6
l 1800
MHz:
-128.9
l 1800
MHz:
-119.5
(theor
etical
value)
UMTS:
LTE
FDD:
l 900
MHz:
-131.3
l 900
MHz:
-109.1
l 1800
MHz:
-131.6
l 1800
MHz:
-109.4
LTE
FDD:
l 900
MHz:
-111.8
l 1800
MHz:
-112.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpti
on
The MRFUd
supports the
maximum
power
configuration
2 x 80 W. The
typical
configurations
are as follows:
See the
MRFUd
sheet in 3900
Series Base
Station
Power
Consumptio
n
Specificatio
ns.
l Output
power for
the
MRFUd
(GSM, 900
MHz/1800
MHz)
l Output
power for
the
MRFUd
(UMTS,
900 MHz/
1800
MHz)
l Output
power for
the
MRFUd
(LTE
FDD, 900
MHz)
162
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitivi
ty with
Four
Antenna
s
Output
Power
Power
Consumpti
on
l Output
power for
the
MRFUd
(GU nonMSR, 900
MHz/1800
MHz)
l Output
power for
the
MRFUd
(GU MSR,
900 MHz/
1800
MHz)
l Output
power for
the
MRFUd
(GL MSR,
900 MHz/
1800
MHz)
l Output
power for
the
MRFUd
(UL MSR,
900 MHz)
For typical PA
configurations
, see Typical
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
163
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitivi
ty with
Four
Antenna
s
Output
Power
Power
Consumpti
on
Power
Configuration
for MRFUd in
3900 Series
Base Station
Initial
Configuration
Guide.
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the MRFUd working in GSM mode: when the S1 or S2 configuration is applied, the maximum output
power of each carrier on the MRFUd is 80 W. If the output power of 60 W or 80 W is required, the related
license must be obtained. After design optimization, the 8PSK and GMSK modulation schemes enable the
same output power for each carrier on the MRFUd when any of the S1 through S6 configurations is used.
When the S7 or S8 configuration is used, the license controlling the GBFD-118104 Enhanced EDGE
Coverage feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes cannot enable
the same output power for each carrier on the MRFUd.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
164
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-150 Output power for the MRFUd (GSM, 900 MHz/1800 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
80
80
2
80
80
3
40
40
4
40
40
5
27
30
6
27
30
7
20
27
8
20
27
Table 5-151 Output power for the MRFUd (UMTS, 900 MHz/1800 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
80
2
80
3
40
4
40
5
25
6
25
1 (MIMO)
2 x 40
2 (MIMO)
2 x 40
3 (MIMO)
2 x 25
4 (MIMO)
2 x 20
NOTE
(a) indicates that the configuration is supported from SRAN8.0 and supported only at the 1800 MHz
frequency band.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
165
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-152 Output power for the MRFUd (LTE FDD, 900 MHz/1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier (MHz)
LTE FDD
1 (MIMO)(a)
2 x 80(a)
5, 10, 15, 2(a)
1 (MIMO)
2 x 60
5, 10, 15, 20
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
Table 5-153 Output power for the MRFUd (GU non-MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output
Power per
UMTS
Carrier (W)
GSM + UMTS
1
1
80
80
2
1
40
80
3
1
27
80
4
1
20
80
5
1
16
80
6
1
12
80
1
2
80
40
2
2
40
40
3
2
27
40
4
2
20
40
5
2
16
40
6
2
12
40
1
3
80
25
2
3
40
25
3
3
27
25
4
3
20
25
5
3
16
25
1
4
80
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
166
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total
Number of
GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output
Power per
UMTS
Carrier (W)
2
4
40
20
3
4
27
20
4
4
20
20
NOTE
l
(b) indicates that the configuration is supported from SRAN7.0 and supported only at the 900 MHz
frequency band.
l
(c) indicates that the configuration is supported from SRAN8.0.
Table 5-154 Output power for the MRFUd (GU MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1(b)
1(b)
30(b)
50(b)
2(b)
1(b)
30(b)
50(b)
2
1
40
40
3
1
40
40
4
1
27
40
5
1
27
20
5
1
25
30
5
1
20
40
6
1
20
40
7
1
20
20
7
1
16
30
1(b)
2(b)
30(b)
50(b)
1
2
40
40
2(b)
2(b)
30(b)
50(b)
2
2
40
40
3
2
30
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
167
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
3
2
25
30
3
2
20
40
4
2
30
20
4
2
25
30
4
2
20
40
5
2
20
20
5(c)
2(c)
20(c)
30(c)
6
2
20
20
1
1 (MIMO)
40
2 x 40
1(b)
1 (MIMO)(b)
30(b)
2 x 50(b)
2
1 (MIMO)
40
2 x 40
2(b)
1 (MIMO)(b)
30(b)
2 x 50(b)
3
1 (MIMO)
20
2 x 40
3
1 (MIMO)
25
2 x 30
4
1 (MIMO)
20
2 x 40
4
1 (MIMO)
25
2 x 30
4
1 (MIMO)
30
2 x 20
1
2 (MIMO)
20
2 x 30
1
2 (MIMO)
40
2 x 20
2
2 (MIMO)
20
2 x 30
2
2 (MIMO)
40
2 x 20
3
2 (MIMO)
15
2 x 20
4
2 (MIMO)
15
2 x 20
NOTE
(d) indicates that the configuration is supported from SRAN7.0 and supported only at the 1800 MHz
frequency band.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
168
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-155 Output power for the MRFUd (GL MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number
of GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidt
h of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
40
2 x 40
1.4, 3, 5, 10,
15, 20
1(d)
1 (MIMO)
(d)
30(d)
2 x 50(d)
1.4, 3, 5, 10,
15, 20(d)
2
1 (MIMO)
40
2 x 40
1.4, 3, 5, 10,
15, 20
2(d)
1 (MIMO)
(d)
30(d)
2 x 50(d)
1.4, 3, 5, 10,
15, 20(d)
3
1 (MIMO)
30
2 x 20
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
25
2 x 30
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
20
2 x 40
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
20
2 x 40
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
25
2 x 30
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
30
2 x 20
1.4, 3, 5, 10,
15, 20
5
1 (MIMO)
16
2 x 30
1.4, 3, 5, 10,
15, 20
5
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
6
1 (MIMO)
15
2 x 20
1.4, 3, 5, 10,
15, 20
6(d)
1 (MIMO)
(d)
16(d)
2 x 30(d)
1.4, 3, 5, 10,
15, 20(d)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
169
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-156 Output power for the MRFUd (UL MSR, 900 MHz)
Mode
Total
Number
of UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidt
h of LTE
FDD
Carrier
(MHz)
UMTS + LTE
FDD
1
1 (MIMO)
40
2 x 40
5, 10
2
1 (MIMO)
40
2 x 40
5, 10
3
1 (MIMO)
20
2 x 40
5, 10
3
1 (MIMO)
30
2 x 20
5, 10
4
1 (MIMO)
20
2 x 40
5, 10
4
1 (MIMO)
30
2 x 20
5, 10
Engineering Specifications
The following table lists the equipment specifications of an MRFUd.
Table 5-157 Equipment specifications of an MRFUd
Type
Dimension (H x W x D)
Weight (kg)
MRFUd
9 U x 14 HP x 308.5 mm (with the
panel)
12
Table 5-158 lists the surge protection specifications of ports on an MRFUd.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-158 Surge protection specifications of ports on an MRFUd
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
170
3900 Series Base Station
Technical Description
Port
RF port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Specification
Surge
current
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Alarm port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an MRFUd.
Table 5-159 Specifications of CPRI ports on an MRFUd
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
MRFUd
2
1.25 or 2.5
Star, chain, or
dual-star
CPRI MUX:
l GU: 6
l GL: 4
l UL: 4
Antenna Capability
The following table provides the antenna capability of an MRFUd.
Table 5-160 Antenna capability of an MRFUd
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
MRFUd
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
171
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.2.13 MRFUe Technical Specifications
Using the software-defined radio (SDR) technology, Multi-Mode Radio Frequency Unit Type
E (MRFUe) modules can work in different modes with different configurations.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an MRFUe.
Table 5-161 Modes and frequency bands supported by an MRFUe
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
MRFUe
900 EGSM
880 to 915
925 to 960
1800
1710 to 1785
1805 to 1880
GSM, UMTS,
LTE FDD, GU,
and GL
RF Specifications
Table 5-162 lists radio frequency (RF) specifications of an MRFUe.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l The GSM receiver sensitivity is measured, as recommended in 3GPP TS 51.021, over the central band at
the antenna connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does
not exceed 2%. The central band is the 80% of the full band.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The MRFUe that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies with
the EN 301 502 V9.2.1 standard.
l The MRFUe that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the 900
or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104 standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
172
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-162 RF specifications of an MRFUe
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitivi
ty with
Four
Antenna
s
MR
FU
e
1T
2R
GSM: 8
TRXs
GSM:
GSM:
GSM:
l 900
MHz:
-113.
7
l 900
MHz:
-116.5
l 900
MHz:
-119.2
(theore
tical
value)
UMTS: 4
carriers
LTE
FDD: 2
carriers.
The
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz.
l 1800
MHz:
-114.
0
UMTS:
l 900
MHz:
-125.
8
l 1800
MHz:
-126.
1
LTE
FDD:
l 900
MHz:
-106.
3
l 1800
MHz:
-106.
6
Issue 05 (2014-08-30)
l 1800
MHz:
-116.8
UMTS:
l 900
MHz:
-128.6
l 1800
MHz:
-128.9
LTE FDD:
l 900
MHz:
-109.1
l 1800
MHz:
-109.4
l 1800
MHz:
-119.5
(theore
tical
value)
UMTS:
l 900
MHz:
-131.3
l 1800
MHz:
-131.6
LTE FDD:
l 900
MHz:
-111.8
l 1800
MHz:
-112.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consump
tion
The MRFUe
supports the
maximum
power
configuration
1 x 125 W.
The typical
configuration
s are as
follows:
See the
MRFUe
sheet in
3900 Series
Base
Station
Power
Consumpti
on
Specificati
ons.
l Output
power for
the
MRFUe
(GSM,
900 MHz/
1800
MHz)
l Output
power for
the
MRFUe
(UMTS,
900 MHz/
1800
MHz)
l Output
power for
the
MRFUe
(LTE
173
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitivi
ty with
Four
Antenna
s
Output
Power
Power
Consump
tion
FDD, 900
MHz/
1800
MHz)
l Output
power for
the
MRFUe
(GU
MSR,
1800
MHz)
l Output
power for
the
MRFUe
(GL
MSR,
1800
MHz)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
174
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the MRFUe working in GSM mode: when the S1 configuration is applied, the maximum output power
of each carrier on the MRFUe is 125 W; when the S2 configuration is applied, the maximum output power
of each carrier on the MRFUe is 60 W. If the output power of 60 W, 80 W, or 125 W is required, the related
license must be obtained. After design optimization, the 8 phase shift keying (8PSK) and Gaussian minimum
shift-frequency keying (GMSK) modulation schemes enable the same output power for each carrier on the
the RF module when the S1, S2, or S3 configuration is used. When any of the S4 through S8 configurations
is used, the license controlling the GBFD-118104 Enhanced EDGE Coverage feature must be obtained.
Otherwise, the 8PSK and GMSK modulation schemes cannot enable the same output power for each carrier
on the MRFUe.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-163 Output power for the MRFUe (GSM, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
80 (SRAN6.0)
80
1
125 (SRAN7.0, 900
MHz)
125
2
60
60
3
40
50
4
30
40
5
25
30
6
20
30
7
15
20
8
10
16
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
175
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-164 Output power for the MRFUe (UMTS, 900 MHz/1800 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
80
2
60
3
40
4
30
Table 5-165 Output power for the MRFUe (LTE FDD, 900 MHz/1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1
60
5, 10, 15, 20
1
40
1.4, 3, 5, 10, 15, 20
2
60
5, 10, 15, 20
2
40
1.4, 3, 5, 10, 15, 20
NOTE
(a) indicates that the configuration is supported from SRAN8.0.
Table 5-166 Output power for the MRFUe (GU MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
2
1
40
40
3
1
25
30
4
1
24
20
4
1
20
30
5
1
18
20
5
1
16
30
6
1
13
20
6(a)
1(a)
15(a)
20(a)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
176
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
7
1
10
20
1
2
40
40
2
2
20
30
3
2
20
20
3
2
15
30
4
2
18
20
5
2
12
20
5(a)
2(a)
15(a)
20(a)
NOTE
In SRAN6.0, when an MRFUe works in GL mode and is configured with two LTE FDD carriers, each
carrier can use 1.4 MHz, 3 MHz, 5 MHz, or 10 MHz bandwidth. In SRAN7.0, when an MRFUe works in
GL mode and is configured with two LTE FDD carriers, only one carrier can use 15 MHz or larger
bandwidth.
Table 5-167 Output power for the MRFUe (GL MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1
60
60
5, 10, 15, 20
1
1
60
40
1.4, 3, 5, 10,
15, 20
2
1
40
40
1.4, 3, 5, 10,
15, 20
3
1
25
30
1.4, 3, 5, 10,
15, 20
3
1
20
40
1.4, 3, 5, 10,
15, 20
4
1
24
20
1.4, 3, 5, 10,
15, 20
4
1
20
30
1.4, 3, 5, 10,
15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
177
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
5
1
20
20
1.4, 3, 5, 10,
15, 20
5
1
16
30
1.4, 3, 5, 10,
15, 20
6
1
13
20
1.4, 3, 5, 10,
15, 20
7
1
10
20
1.4, 3, 5, 10,
15, 20
3
2
20
20
1.4, 3, 5, 10,
15, 20
4
2
18
20
1.4, 3, 5, 10,
15, 20
5
2
12
20
1.4, 3, 5, 10,
15, 20
Engineering Specifications
The following table lists the equipment specifications of an MRFUe.
Table 5-168 Equipment specifications of an MRFUe
Type
Dimension (H x W x D)
Weight (kg)
MRFUe
9 U x 14 HP x 308.5 mm (with the
panel)
12
Table 5-169 lists the surge protection specifications of ports on an MRFUe.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
178
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-169 Surge protection specifications of ports on an MRFUe
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
Alarm port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an MRFUe.
Table 5-170 Specifications of CPRI ports on an MRFUe
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
MRFUe
2
1.25 or 2.5
Star, chain, or
dual-star
CPRI MUX:
l GU: 6
l GL: 4
Antenna Capability
The following table provides the antenna capability of an MRFUe.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
179
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-171 Antenna capability of an MRFUe
Type
TMA Support
Supported RET Antennas
MRFUe
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3 Technical Specifications of RRUs
This section provides technical specifications of RRUs, including supported modes, frequency
bands, RF specifications, engineering specifications, specifications of CPRI ports, and antenna
capabilities.
5.3.1 RRU3004 Technical Specifications
The RRU3004 is a double-transceiver Remote Radio Unit, which supports a maximum of two
carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3004.
Table 5-172 Modes and frequency bands supported by an RRU3004
Type
Mode
Frequency Band
(MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
RRU3004
GSM
900 EGSM
880 to 915
925 to 960
900 PGSM
890 to 915
935 to 960
1800
1710 to 1785
1805 to 1880
RF Specifications
Table 5-173 lists RF specifications of an RRU3004.
NOTE
ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B receive
channels.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
180
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-173 RF specifications of an RRU3004
Type
RRU30
04
RX and
TX
Chann
els
Capaci
ty
2T2R
2 TRXs
Receiver Sensitivity
(dBm)
Receiver
Sensitivity
with One
Antenna
Receiver
Sensitivity
with Two
Antennas
-113.0
-115.8
Output Power
Power
Consum
ption
l Output
power for
the
RRU3004
(GSM
(GBTS),
900 MHz)
See the
RRU300
4 sheet in
3900
Series
Base
Station
Power
Consump
tion
Specifica
tions.
l Output
power for
the
RRU3004
(GSM
(GBTS),
1800 MHz)
For typical PA
configurations,
see Typical
Power
Configuration
for RRU3004 in
3900 Series
Base Station
Initial
Configuration
Guide.
NOTE
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
l Two RRU3004 modules are required when three or four carriers are configured.
Table 5-174 Output power for the RRU3004 (GSM (GBTS), 900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of GSM
Carriers
Output Power per GSM
Carrier (W)
GSM
1
30 (GMSK)/20 (8PSK)
1 (PBT)
40 (GMSK)/26 (8PSK)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
181
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of GSM
Carriers
Output Power per GSM
Carrier (W)
2
30 (GMSK)/20 (8PSK)
3
15 (GMSK)/10 (8PSK)
4
15 (GMSK)/10 (8PSK)
Table 5-175 Output power for the RRU3004 (GSM (GBTS), 1800 MHz)
Mode
Total Number of GSM
Carriers
Output Power per GSM
Carrier (W)
GSM
1
20 (GMSK)/13 (8PSK)
1 (PBT)
30 (GMSK)/20 (8PSK)
2
20 (GMSK)/13 (8PSK)
3
10 (GMSK)/6.6 (8PSK)
4
10 (GMSK)/6.6 (8PSK)
Engineering Specifications
The following table lists equipment specifications of an RRU3004.
Table 5-176 Equipment specifications of an RRU3004
Type
Input Power
Specifications
Dimensions (H x
W x D)
Weight (kg)
RRU3004
-48 V DC, voltage
range: -57 V DC to
-36 V DC
l 485 mm x 380
mm x 130 mm
(with the housing)
l 17 (with the
housing)
l 480 mm x 356
mm x 100 mm
(without the
housing)
l 15 (without the
housing)
The following table lists environmental specifications of an RRU3004.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
182
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-177 Environmental specifications of an RRU3004
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3004
l Without
solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to 106
kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l With
solar
radiation:
-40°C to
+45°C
The following table lists compliance standards of an RRU3004.
Table 5-178 Compliance standards of an RRU3004
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3004
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-179 lists the surge protection specifications of ports on an RRU3004.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
183
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-179 Surge protection specifications of ports on an RRU3004
Port
Usage
Scenario
Surge Protection Mode
Specifications
DC power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
5 kA
Common
mode
5 kA
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
40 kA
Common
mode
40 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
AC power
supply port
Applicable
to scenarios
where
GRFUs are
installed
indoors
Applicable
to scenarios
where
GRFUs are
installed
outdoors
RF port
Issue 05 (2014-08-30)
Surge
Surge
current
Surge
Surge
current
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
184
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specifications
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
250 A
Common
mode
250 A
Port on a
local power
monitoring
device and
an alarm port
Applicable
to the
scenario
where
batteries
under
monitoring
and RRUs
are installed
back to
back or the
scenario
where the
distance
between
them is
within 1 m.
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3004.
Table 5-180 Specifications of CPRI ports on an RRU3004
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3004
2
1.25
Star, chain,
or ring
6
40
Antenna Capability
The following table lists antenna capability of an RRU3004.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
185
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-181 Antenna capability of an RRU3004
Type
TMA Support
RET Antenna Support
RRU3004
Not supported
AISG1.1
NOTE
l
An external bridge tap (BT) is required if an RRU3004 needs to be configured with a tower-mounted
amplifier (TMA).
l
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.2 RRU3008 Technical Specifications
The RRU3008 is a multi-carrier Remote Radio Unit (RRU) applicable to the GSM network,
which supports a maximum of eight carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3008.
Table 5-182 Modes and frequency bands supported by an RRU3008
Type
Mode
Frequency Band
(MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
RRU3008
V1
GSM
850
824 to 849
869 to 894
900 EGSM
880 to 915
925 to 960
880 to 905
925 to 950
900 PGSM
890 to 915
935 to 960
900 CMCC
885 to 910
930 to 955
1800
1710 to 1755
1805 to 1850
1740 to 1785
1835 to 1880
1850 to 1890
1930 to 1970
1870 to 1910
1950 to 1990
900 EGSM
880 to 915
925 to 960
900 PGSM
890 to 915
935 to 960
900 CMCC
885 to 910
930 to 955
1900
RRU3008
V2
GSM
RF Specifications
Table 5-183 lists RF specifications of an RRU3008.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
186
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
187
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-183 RF specifications of an RRU3008
Type
RRU30
08 V1
RX and
TX
Chann
els
Capaci
ty
2T2R
8 TRXs
Receiver Sensitivity
(dBm)
Receiver
Sensitivity
with One
Antenna
Receiver
Sensitivity
with Two
Antennas
-113.0
-115.8
Output Power
Power
Consum
ption
The RRU3008
V1 supports the
maximum
power
configuration 2
x 40 W. The
typical
configurations
are as follows:
See the
RRU300
8 sheet in
3900
Series
Base
Station
Power
Consump
tion
Specifica
tions.
l Output
power for
the
RRU3008
V1 (GSM
(GBTS),
900 MHz/
850 MHz/
1800 MHz/
1900 MHz)
l Output
power for
the
RRU3008
V1 (GSM
(eGBTS),
900 MHz/
850 MHz/
1800 MHz/
1900 MHz)
For typical PA
configurations,
see Typical
Power
Configuration
for RRU3008
V1 in 3900
Series Base
Station Initial
Configuration
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
188
3900 Series Base Station
Technical Description
Type
RRU30
08 V2
5 Product Specifications
RX and
TX
Chann
els
Capaci
ty
2T2R
8 TRXs
Receiver Sensitivity
(dBm)
Receiver
Sensitivity
with One
Antenna
Receiver
Sensitivity
with Two
Antennas
l 900 MHz
EGSM:
-113.3
l 900 MHz
EGSM:
-116.1
l 900 MHz
PGSM/
900 MHz
CMCC:
-113.5
l 900 MHz
PGSM/
900 MHz
CMCC:
-116.3
Output Power
Power
Consum
ption
The RRU3008
V2 supports the
maximum
power
configuration 2
x 40 W. The
typical
configurations
are as follows:
l Output
power for
the
RRU3008
V2 (GSM
(GBTS),
900 MHz)
l Output
power for
the
RRU3008
V2 (GSM
(eGBTS),
900 MHz)
For typical PA
configurations,
see Typical
Power
Configuration
for RRU3008
V2 in 3900
Series Base
Station Initial
Configuration
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
189
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-184 Output power for the RRU3008 V1 (GSM (GBTS), 900 MHz/850 MHz/1800 MHz/
1900 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
40 (GMSK)/26 (8PSK)
40 (GMSK)/26
(8PSK)
2
40 (GMSK)/26 (8PSK)
40 (GMSK)/26
(8PSK)
3
20 (GMSK)/13 (8PSK)
20 (GMSK)/13
(8PSK)
4
15 (GMSK)/10 (8PSK)
20 (GMSK)/13
(8PSK)
5
12 (GMSK)/8 (8PSK)
12 (GMSK)/8 (8PSK)
6
10 (GMSK)/6.6 (8PSK)
12 (GMSK)/8 (8PSK)
7
7 (GMSK)/4.6 (8PSK)
8 (GMSK)/5.3 (8PSK)
8
5.5 (GMSK)/3.6 (8PSK)
7 (GMSK)/4.6 (8PSK)
Table 5-185 Output power for the RRU3008 V1 (GSM (eGBTS), 900 MHz/850 MHz/1800
MHz/1900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (dBm)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (dBm)
GSM
1
46.0 (GMSK)/44.1
(8PSK)
46.0 (GMSK)/44.1
(8PSK)
2
46.0 (GMSK)/44.1
(8PSK)
46.0 (GMSK)/44.1
(8PSK)
3
43.0 (GMSK)/41.1
(8PSK)
43.0 (GMSK)/41.1
(8PSK)
4
41.8 (GMSK)/40.0
(8PSK)
43.0 (GMSK)/41.1
(8PSK)
5
40.8 (GMSK)/39.0
(8PSK)
40.8 (GMSK)/39.0
(8PSK)
6
40.0 (GMSK)/38.2
(8PSK)
40.8 (GMSK)/39.0
(8PSK)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
190
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (dBm)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (dBm)
7
38.5 (GMSK)/36.6
(8PSK)
39.0 (GMSK)/37.2
(8PSK)
8
37.4 (GMSK)/35.6
(8PSK)
38.5 (GMSK)/36.6
(8PSK)
NOTE
RRU3008 V2 (GSM, 900MHz):
l
After design optimization, the 8 phase shift keying (8PSK) and Gaussian minimum shift-frequency
keying (GMSK) modulation schemes enable the same output power for each carrier on the RRU3008
V2 when any of the S1 through S6 configurations is used.
l
When the S7 or S8 configurations is used, the license controlling the GBFD-118104 Enhanced
EDGE Coverage feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes
cannot enable the same output power for each carrier on the RRU3008 V2.
l
RF standard: EN 301 502 V9.2.1.
Table 5-186 Output power for the RRU3008 V2 (GSM (GBTS), 900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
40 (GMSK)/40 (8PSK)
40 (GMSK)/40 (8PSK)
2
40 (GMSK)/40 (8PSK)
40 (GMSK)/40 (8PSK)
3
20 (GMSK)/20 (8PSK)
20 (GMSK)/20 (8PSK)
4
20 (GMSK)/20 (8PSK)
20 (GMSK)/20 (8PSK)
5
13 (GMSK)/13 (8PSK)
15 (GMSK)/15 (8PSK)
6
13 (GMSK)/13 (8PSK)
15 (GMSK)/15 (8PSK)
7
10 (GMSK)/10 (8PSK)
13 (GMSK)/13 (8PSK)
8
10 (GMSK)/10 (8PSK)
13 (GMSK)/13 (8PSK)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
191
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-187 Output power for the RRU3008 V2 (GSM (eGBTS), 900 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (dBm)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (dBm)
GSM
1
46.0 (GMSK)/46.0
(8PSK)
46.0 (GMSK)/46.0
(8PSK)
2
46.0 (GMSK)/46.0
(8PSK)
46.0 (GMSK)/46.0
(8PSK)
3
43.0 (GMSK)/43.0
(8PSK)
43.0 (GMSK)/43.0
(8PSK)
4
43.0 (GMSK)/43.0
(8PSK)
43.0 (GMSK)/43.0
(8PSK)
5
41.1 (GMSK)/41.1
(8PSK)
41.8 (GMSK)/41.8
(8PSK)
6
41.1 (GMSK)/41.1
(8PSK)
41.8 (GMSK)/41.8
(8PSK)
7
40.0 (GMSK)/40.0
(8PSK)
41.1 (GMSK)/41.1
(8PSK)
8
40.0 (GMSK)/40.0
(8PSK)
41.1 (GMSK)/41.1
(8PSK)
Engineering Specifications
Table 5-188 lists equipment specifications of an RRU3008.
Table 5-188 Equipment specifications
Type
Input Power
Specifications
Dimensions (H x
W x D)
Weight (kg)
RRU3008
-48 V DC, voltage
range: -57 V DC to
-36 V DC
l 485 mm x 380
mm x 170 mm
(with the housing)
l 25 (with the
housing)
l 480 mm x 356
mm x 140 mm
(without the
housing)
l 23 (without the
housing)
The following table lists environmental specifications of an RRU3008.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
192
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-189 Environmental specifications of an RRU3008
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3008
V1
l Without
solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to 106
kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l With
solar
radiation:
-40°C to
+45°C
RRU3008
V2
l Without
solar
radiation:
-40°C to
+55°C
l With
solar
radiation:
-40°C to
+50°C
The following table lists compliance standards of an RRU3008.
Table 5-190 Compliance standards of an RRU3008
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3008
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-191 and Table 5-192 list the surge protection specifications of ports on an RRU3008.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
193
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-191 Surge protection specifications of ports on an RRU3008 V1
Port
Usage
Scenario
Surge Protection Mode
Specifications
DC power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
5 kA
Common
mode
5 kA
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
40 kA
Common
mode
40 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
AC power
supply port
RF port
Issue 05 (2014-08-30)
Applicable
to scenarios
where
GRFUs are
installed
indoors
Surge
Surge
current
Applicable
to the
scenario
where
RRU3008
V2 modules
are
configured
remotely or
placed
outdoors
Surge
Applicable
to all
scenarios
Surge
current
Surge
current
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
194
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specifications
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
250 A
RET port
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Port on a
local power
monitoring
device and
an alarm port
Applicable
to the
scenario
where
batteries
under
monitoring
and RRUs
are installed
back to
back or the
scenario
where the
distance
between
them is
within 1 m.
Surge
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
250 A
Common
mode
250 A
250 A
Table 5-192 Surge protection specifications of ports on an RRU3008 V2
Port
Usage
Scenario
Surge Protection Mode
Specifications
DC power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Surge
current
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
195
3900 Series Base Station
Technical Description
Port
AC power
supply port
5 Product Specifications
Usage
Scenario
Applicable
to scenarios
where
GRFUs are
installed
indoors
Applicable
to scenarios
where
GRFUs are
installed
outdoors
RF port
Surge
Surge
current
Surge
Surge
current
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Issue 05 (2014-08-30)
Surge Protection Mode
Specifications
Common
mode
20 kA
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
5 kA
Common
mode
5 kA
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
40 kA
Common
mode
40 kA
Differential
mode
8 kA
Common
mode
40 kA
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
196
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specifications
Port on a
local power
monitoring
device and
an alarm port
Applicable
to the
scenario
where
batteries
under
monitoring
and RRUs
are installed
back to
back or the
scenario
where the
distance
between
them is
within 1 m.
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3008.
Table 5-193 Specifications of CPRI ports on an RRU3008
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3008
V1
2
l 850
MHz/
1900
MHz:
1.25
Star, chain,
or ring
6
40
l 1800
MHz:
1.25 or
2.5
RRU3008
V2
2
1.25 or 2.5
Antenna Capability
The following table lists antenna capability of an RRU3008.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
197
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-194 Antenna capability of an RRU3008
Type
TMA Support
RET Antenna Support
RRU3008 V1
Supported
AISG2.0 and AISG1.1
RRU3008 V2
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.3 RRU3801E Technical Specifications
An RRU3801E, which is a remote radio unit for UMTS, supports a maximum of two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3801E.
Table 5-195 Modes and frequency bands supported by an RRU3801E
Type
Mode
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
RRU3801E
(DC)
UMTS
2100
1920 to 1980
2110 to 2170
1900
1850 to 1910
1930 to 1990
850
824 to 835
869 to 880
2100
1920 to 1980
2110 to 2170
RRU3801E
(AC)
RF Specifications
Table 5-196 lists radio frequency (RF) specifications of an RRU3801E.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels
and B receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit
channels and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band
at the antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not
exceed 0.001.
l The receiver sensitivity on the UMTS 850 MHz frequency band is measured on its frequency subbands.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output
power is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
198
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-196 RRU3801E RF specifications
Type
RRU380
1E
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
1T2R
2 carriers
l 2100
MHz:
-125.
8
l 2100
MHz:
--128
.6
l 2100
MHz:
-131.
3
l 1900
MHz:
-125.
3
l 1900
MHz:
-128.
1
l 1900
MHz:
-130.
8
l 850
MHz:
-125.
6
l 850
MHz:
-128.
4
l 850
MHz:
-131.
1
Output
Power
Power
Consu
mption
The
RRU380
1E
supports
the
maximu
m power
configur
ation 1 x
40 W.
For
typical
configur
ations,
see the
Output
power
for the
RRU380
1E
(UMTS,
850
MHz/
1900
MHz/
2100
MHz)
table.
See the
RRU380
1E sheet
in 3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
199
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-197 Output power for the RRU3801E (UMTS, 850 MHz/1900 MHz/2100 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
40
2
20
Engineering Specifications
The following table lists the equipment specifications of an RRU3801E.
Table 5-198 Equipment specifications of an RRU3801E
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3801E (DC)
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270
mm x 140 mm
(without the
housing)
l 15 kg (without the
housing)
l 17 kg (with the
housing)
l 485 mm x 285
mm x 170 mm
(with the
housing)
RRU3801E (AC)
l 200 V AC to 240
V AC singlephase; voltage
range: 176 V AC
to 290 V AC
l 100/200 V AC to
120/240 V AC
dual-phase;
voltage range:
90/180 V AC to
135/270 V AC
l 480 mm x 270
mm x 220 mm
(without the
housing)
l 20.5 kg (without
the housing)
l 22.5 kg (with the
housing)
l 485 mm x 285
mm x 250 mm
(with the
housing)
The following table lists the environmental specifications of an RRU3801E.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
200
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-199 Environmental specifications of an RRU3801E
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3801E
l With
1120 W/
m2 solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to 106
kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l Without
solar
radiation:
-40°C to
+55°C
The following table lists the compliance standards for an RRU3801E.
Table 5-200 Compliance standards of an RRU3801E
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3801E (DC)
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
RRU3801E (AC)
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
IP55
Table 5-201 lists the surge protection specifications of ports on an RRU3801E.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
201
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-201 Surge protection specifications of ports on an RRU3801E
Port
Usage
Scenario
Surge Protection Mode
Specifications
DC power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
5 kA
Common
mode
5 kA
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
40 kA
Common
mode
40 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
AC power
supply port
Indoor
applications
Surge
Surge
current
Outdoor
applications
Surge
Surge
current
RF port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
202
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specifications
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3801E.
Table 5-202 Specifications of CPRI ports on an RRU3801E
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3801E
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3801E.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
203
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-203 Antenna capability of an RRU3801E
Type
TMA Support
RET Antenna Support
RRU3801E
Supported
AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.4 RRU3804 Technical Specifications
The RRU3804 is a type of radio remote unit. An RRU3804 working in UMTS mode supports a
maximum of four UMTS carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3804.
Table 5-204 Modes and frequency bands supported by an RRU3804
Type
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
Mode
RRU3804 (DC)
2100
1920 to 1980
2110 to 2170
UMTS
1900
1850 to 1910
1930 to 1990
UMTS
AWS
1710 to 1755
2110 to 2155
UMTS
850
824 to 849
869 to 894
UMTS
835 to 849
880 to 894
UMTS
2100
1920 to 1980
2110 to 2170
UMTS
850
824 to 849
869 to 894
RRU3804 (AC)
RF Specifications
Table 5-205 lists radio frequency (RF) specifications of an RRU3804.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
204
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels
and B receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit
channels and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band
at the antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not
exceed 0.001.
l The receiver sensitivity on the UMTS 850 MHz frequency band is measured on its frequency subbands.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output
power is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
205
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-205 RRU3804 RF specifications
Type
RRU380
4
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
1T2R
l RRU
3804
(DC):
4
carrie
rs
l 2100
MHz
or
AWS
:
-125.
8
l 2100
MHz
or
AWS
:
-128.
6
l 2100
MHz
or
AWS
:
-131.
3
l 1900
MHz
:
-125.
3
l 1900
MHz:
-128.
1
l 1900
MHz:
-130.
8
l 850
MHz:
-128.
4
l 850
MHz:
-131.
1
l RRU
3804
(AC):
4
carrie
rs
l 850
MHz
:
-125.
6
Output
Power
Power
Consu
mption
The
RRU380
4
supports
the
maximu
m power
configur
ation 1 x
60 W.
For
typical
configur
ations,
see the
table
Output
power
for the
RRU380
4
(UMTS,
850
MHz/
AWS/
1900
MHz/
2100
MHz).
See the
RRU380
4 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
206
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-206 Output power for the RRU3804 (UMTS, 850 MHz/AWS/1900 MHz/2100 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
2
30
3
20
4
15
Engineering Specifications
The following table lists the equipment specifications of an RRU3804.
Table 5-207 Equipment specifications of an RRU3804
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3804 (DC)
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270
mm x 140 mm
(without the
housing)
l 15 kg (without the
housing)
l 17 kg (with the
housing)
l 485 mm x 285
mm x 170 mm
(with the
housing)
RRU3804 (AC)
l 200 V AC to 240
V AC singlephase; voltage
range: 176 V AC
to 290 V AC
l 100/200 V AC to
120/240 V AC
dual-phase;
voltage range:
90/180 V AC to
135/270 V AC
l 480 mm x 270
mm x 220 mm
(without the
housing)
l 20.5 kg (without
the housing)
l 22.5 kg (with the
housing)
l 485 mm x 285
mm x 250 mm
(with the
housing)
The following table lists the environmental specifications of an RRU3804.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
207
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-208 Environmental specifications of an RRU3804
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3804
(DC)
l With
1120 W/
m2 solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
RRU3804
(AC)
l Without
solar
radiation:
-40°C to
+55°C
The following table lists the compliance standards for an RRU3804.
Table 5-209 Compliance standards for an RRU3804
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3804 (DC)
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
RRU3804 (AC)
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
IP55
Table 5-210 lists the surge protection specifications of ports on an RRU3804.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
208
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-210 Surge protection specifications of ports on an RRU3804
Port
Usage
Scenario
Surge Protection Mode
Specifications
DC power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
5 kA
Common
mode
5 kA
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
40 kA
Common
mode
40 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
AC power
supply port
Indoor
applications
Surge
Surge
current
Outdoor
applications
Surge
Surge
current
RF port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
209
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specifications
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3804.
Table 5-211 Specifications of CPRI ports on an RRU3804
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3804
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3804.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
210
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-212 Antenna capability of an RRU3804
Type
TMA Support
RET Antenna Support
RRU3804
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.5 RRU3805 Technical Specifications
The RRU3805 is a type of radio remote unit. An RRU3805 working in UMTS mode supports a
maximum of three UMTS carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3805.
Table 5-213 Modes and frequency bands supported by an RRU3805
Type
Frequency
Band (MHz)
RX Frequency TX Frequency
Band (MHz)
Band (MHz)
Mode
RRU3805
1800
1749.9 to
1764.9
1844.9 to 1859.9
UMTS
1900
1850 to 1890
1930 to 1970
UMTS
1870 to 1910
1950 to 1990
835 to 849
880 to 894
850
UMTS
RF Specifications
Table 5-214 lists radio frequency (RF) specifications of an RRU3805.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
211
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-214 RF Specifications
Type
RRU380
5
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
2T2R
l 1800
MHz:
3
carrie
rs
l 1800
MHz
:
-125.
3
l 1800
MHz:
-128.
1
l 1800
MHz:
-130.
8
l 1900
MHz:
2
carrie
rs
l 850
MHz
/
1900
MHz
:
-125.
2
l 850
MHz/
1900
MHz:
-128.
0
l 850
MHz/
1900
MHz:
-130.
7
l 850
MHz:
2
carrie
rs
Output
Power
Power
Consum
ption
The
RRU380
5
supports
configur
ations of
singleoutput,
multiple
-input
multiple
-output
(MIMO)
, or the
combina
tion of
the two.
See the
RRU380
5 sheet in
3900
Series
Base
Station
Power
Consump
tion
Specifica
tions.
l 1800
MHz
:
supp
orts
the
maxi
mum
powe
r
confi
gurat
ion is
2x
60
W.
For
typic
al
confi
gurat
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
212
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
Output
Power
Power
Consum
ption
ions,
see
the
table
Outp
ut
powe
r for
the
RRU
3805
(UM
TS,
1800
MHz
).
l 1900
MHz
/850
MHz
:
supp
orts
the
maxi
mum
powe
r
confi
gurat
ion 2
x 30
W.
For
typic
al
confi
gurat
ions,
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
213
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
Output
Power
Power
Consum
ption
see
the
table
Outp
ut
powe
r for
the
RRU
3805
(UM
TS,
850
MHz
/1900
MHz
).
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
RRU380
5 in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
214
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-215 Output power for the RRU3805 (UMTS, 1800 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 60
2
Configured in one PA: 30
2
Configured in two PAs: 60
3
Configured in one PA: 20
3
Configured in two PAs: 30 +
60
1 (MIMO)
2 x 60
2 (MIMO)
2 x 30
3 (MIMO)
2 x 20
Table 5-216 Output power for the RRU3805 (UMTS, 850 MHz/1900 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 40
2
Configured in two PAs: 30
1 (MIMO)
2 x 30
2 (MIMO)
2 x 15
Engineering Specifications
The following table lists the equipment specifications of an RRU3805.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
215
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-217 Equipment specifications of an RRU3805
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3805
l 1800 MHz: -48 V
DC; voltage
range: -57 V DC
to -36 V DC
l 485 mm x 356
mm x 140 mm
(without the
housing)
l 22 kg (without the
housing)
l 1900 MHz or 850
MHz: -48 V DC;
voltage range: -57
V DC to -38.4 V
DC
l 485 mm x 380
mm x 170 mm
(with the
housing)
l 24 kg (with the
housing)
The following table lists the environmental specifications of an RRU3805.
Table 5-218 Environmental specifications of an RRU3805
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3805
l With
1120 W/
m2 solar
radiation:
-40°C to
+45°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l Without
solar
radiation:
-40°C to
+50°C
The following table lists the compliance standards for an RRU3805.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
216
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-219 Compliance standards for an RRU3805
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3805
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Surge Protection Specifications
Table 5-220 lists the surge protection specifications of ports on an RRU3805.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-220 Surge protection specifications of ports on an RRU3805
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Interconnect
ion port for
receiving RF
signals
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
217
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specifications
RET port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3805.
Table 5-221 Specifications of CPRI ports on an RRU3805
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3805
2
l 850/1900
MHz:
1.25
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l 1800
MHz:
1.25/2.5
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
218
3900 Series Base Station
Technical Description
5 Product Specifications
Antenna Capability
The following table lists the antenna capability of an RRU3805.
Table 5-222 Antenna capability of an RRU3805
Type
TMA Support
RET Antenna Support
RRU3805
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.6 RRU3806 Technical Specifications
An RRU3806, which is a remote radio unit for UMTS, supports a maximum of four carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3806.
Table 5-223 Modes and frequency bands supported by an RRU3806
Type
Mode
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
RRU3806
UMTS
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-224 lists radio frequency (RF) specifications of an RRU3806.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
219
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-224 RRU3806 RF specifications
Type
RRU380
6
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
1T2R
4 carriers
-125.8
-128.6
-131.3
Output
Power
Power
Consu
mption
The
RRU380
6
supports
the
maximu
m power
configur
ation 1 x
80 W.
For
typical
configur
ations,
see the
Output
power
for the
RRU380
6
(UMTS,
2100
MHz)
table.
See the
RRU380
6 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-225 Output power for the RRU3806 (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
80
2
40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
220
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
3
26
4
20
Engineering Specifications
The following table lists the equipment specifications of an RRU3806.
Table 5-226 Equipment specifications of an RRU3806
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3806 (DC)
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270
mm x 140 mm
(without the
housing)
l 15 kg (without the
housing)
l 17 kg (with the
housing)
l 485 mm x 285
mm x 170 mm
(with the
housing)
RRU3806 (AC)
l 200 V AC to 240
V AC singlephase; voltage
range: 176 V AC
to 290 V AC
l 100/200 V AC to
120/240 V AC
dual-phase;
voltage range:
90/180 V AC to
135/270 V AC
l 480 mm x 270
mm x 220 mm
(without the
housing)
l 20.5 kg (without
the housing)
l 22.5 kg (with the
housing)
l 485 mm x 285
mm x 250 mm
(with the
housing)
The following table lists the environmental specifications of an RRU3806.
Table 5-227 Environmental specifications of an RRU3806
Issue 05 (2014-08-30)
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3806
(DC)
l With
1120 W/
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
221
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Operating
Temperatu
re
RRU3806
(AC)
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
m2 solar
radiation:
-40°C to
+50°C
l Without
solar
radiation:
-40°C to
+55°C
The following table lists the compliance standards for an RRU3806.
Table 5-228 Compliance standards for an RRU3806
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3806 (DC)
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
RRU3806 (AC)
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
IP55
Table 5-229 lists the surge protection specifications of ports on an RRU3806.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-229 Surge protection specifications of ports on an RRU3806
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specifications
DC power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
222
3900 Series Base Station
Technical Description
Port
AC power
supply port
5 Product Specifications
Usage
Scenario
Indoor
applications
Surge Protection Mode
Specifications
Surge
current
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
5 kA
Common
mode
5 kA
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
40 kA
Common
mode
40 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
Surge
current
Outdoor
applications
Surge
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Issue 05 (2014-08-30)
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
223
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specifications
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3806.
Table 5-230 Specifications of CPRI ports on an RRU3806
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3806
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3806.
Table 5-231 Antenna capability of an RRU3806
Issue 05 (2014-08-30)
Type
TMA Support
RET Antenna Support
RRU3806
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
224
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.7 RRU3808 Technical Specifications
The RRU3808 is a type of radio remote unit. An RRU3808 working in UMTS mode supports a
maximum of four UMTS carriers. If it works in LTE FDD mode, it supports only one LTE FDD
carrier.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3808.
Table 5-232 Modes and frequency bands supported by an RRU3808
Type
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
Mode
RRU3808
2100
1920 to 1980
2110 to 2170
UMTS
AWS
1710 to 1755
2110 to 2155
UMTS, LTE
FDD, and UL
RF Specifications
Table 5-233 lists radio frequency (RF) specifications of an RRU3808.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
225
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-233 RF Specifications
Type
RRU380
8
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
2T2R
UMTS:
4 carriers
UMTS:
-125.8
UMTS:
-128.6
UMTS:
-131.3
LTE
FDD:
Two
carriers.
LTE
FDD:
-106.5
LTE
FDD:
-109.3
LTE
FDD:
-112.0
NOTE
The
RRU38
08 does
not
support
the
1T2R
configu
ration
when
working
in the
LTE
FDD
mode.
l One
carrie
r with
a
band
width
of 5,
10, or
15
MHz.
l Two
carrie
rs:
the
band
width
per
carrie
r is 5
or 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consu
mption
The
maximu
m power
configur
ation is 2
x 40 W.
See the
RRU380
8 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
l UMT
S:
supp
orts
confi
gurati
ons of
singl
eoutpu
t,
multi
pleinput
multi
pleoutpu
t
(MI
MO),
or the
comb
inatio
n of
the
two,
and
unev
en
powe
r
confi
226
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
gurati
ons.
–F
or
ty
pi
ca
l
co
nf
ig
ur
ati
on
s
in
si
ng
le
ou
tp
ut
or
M
I
M
O
sc
en
ar
io
s,
se
e
th
e
ta
b
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
227
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
le
O
ut
p
ut
p
o
w
er
fo
r
th
e
R
R
U
38
08
(
U
M
T
S,
A
W
S/
21
00
M
H
z).
–F
or
ty
pi
ca
l
co
nf
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
228
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
ig
ur
ati
on
s
in
hy
br
id
co
nf
ig
ur
ati
on
sc
en
ar
io
s,
se
e
th
e
ta
b
le
C
ar
ri
er
co
m
bi
n
at
io
ns
su
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
229
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
p
p
or
te
d
b
y
R
R
U
38
08
(
U
M
T
S)
in
h
y
br
id
co
nf
ig
ur
at
io
ns
.
In
th
is
sc
en
ar
io,
on
e
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
230
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
R
R
U
38
08
su
pp
or
ts
a
m
ax
i
m
u
m
of
fo
ur
ca
rri
er
s.
E
ac
h
tr
an
s
m
it
ch
an
ne
l
su
pp
or
ts
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
231
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
a
m
ax
i
m
u
m
of
fo
ur
ca
rri
er
s
an
d
th
e
m
ax
i
m
u
m
ou
tp
ut
po
w
er
of
ea
ch
tr
an
s
m
it
ch
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
232
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
an
ne
l
is
40
W
.
l LTE
FDD:
For
typic
al
confi
gurati
ons,
see
the
table
Tabl
e
5-236
.
l UL:
For
typic
al
confi
gurati
ons,
see
the
table
Outp
ut
powe
r for
the
RRU
3808
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
233
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
(UL,
AWS
).
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
RRU380
8 in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-234 Output power for the RRU3808 (UMTS, AWS/2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 40
2
Configured in one PA: 20
2
Configured in two PAs: 40
3
Configured in one PA: 13
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
234
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
4
Configured in one PA: 10
4
Configured in two PAs: 20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 20
3 (MIMO)
2 x 13
4 (MIMO)
2 x 10
Table 5-235 Carrier combinations supported by RRU3808 (UMTS) in hybrid configurations
Number of MIMO Carriers
Number of Single-Output Carriers
1
3
2
3
3
1
Table 5-236 Output power for the RRU3808 (LTE FDD, AWS)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier (MHz)
LTE FDD
1 (MIMO)
2 x 40
5, 10, 15
2 (MIMO)
l Carrier1: 2 x 13
l Carrier1: 5
l Carrier2: 2 x 27
l Carrier2: 10
2 x 20
5
2 (MIMO)
Table 5-237 Output power for the RRU3808 (UL, AWS)
Issue 05 (2014-08-30)
Mode
Total
Number of
UMTS
Carriers
Total
Number
of LTE
FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
1 (MIMO)
1 (MIMO)
2 x 20
2 x 20
5, 10, 15
1
1 (MIMO)
20
2 x 20
5, 10, 15
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
235
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total
Number of
UMTS
Carriers
Total
Number
of LTE
FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
2
1 (MIMO)
Configured in
two PAs: 20
2 x 20
5, 10, 15
3
1 (MIMO)
Configured in
two PAs: 10
2 x 20
5, 10
4
1 (MIMO)
Configured in
two PAs: 10
2 x 20
5, 10
Equipment Specifications
Table 5-238 lists the equipment specifications of an RRU3808.
Table 5-238 Equipment specifications of an RRU3808
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3808
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270
mm x 140 mm
(without the
housing)
l 17 kg (without the
housing)
l 19 kg (with the
housing)
l 485 mm x 285
mm x 170 mm
(with the
housing)
The following table lists the environmental specifications of an RRU3808.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
236
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-239 Environmental specifications of an RRU3808
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3808
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l With
solar
radiatio:
-40°C to
+50°C
The following table lists the compliance standards for an RRU3808.
Table 5-240 Compliance standards for an RRU3808
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3808
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-241 lists the surge protection specifications of ports on an RRU3808.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
237
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-241 Surge protection specifications of ports on an RRU3808
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3808.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
238
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-242 Specifications of CPRI ports on an RRU3808
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3808
2
1.25 or 2.5
Star, chain,
ring, or dualstar
UMTS:
UMTS: 40
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
LTE FDD/
UL:
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
LTE FDD:
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The
maximum
distances of
the RRUs
from the
BBU vary
with the
types of BBP
in LTE mode
as follows:
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
239
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
to 5
MHz.
ty ≥
4: 20
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
UL:
l CPRI
MUX: 4
Antenna Capability
The following table lists the antenna capability of an RRU3808.
Table 5-243 Antenna capability of an RRU3808
Issue 05 (2014-08-30)
Type
TMA Support
RET Antenna Support
RRU3808
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
240
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.8 RRU3821E Technical Specifications
The RRU3821E is a multi-mode radio remote unit. Adopting the software-defined radio (SDR)
technology, RRU3821E modules can work in different modes with different configurations.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3821E.
Table 5-244 Modes and frequency bands supported by an RRU3821E
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3821
E
1800
1744.9 to 1764.9
1839.9 to 1859.9
UMTS, LTE
FDD, or UL
RF Specifications
Table 5-245 lists radio frequency (RF) specifications of an RRU3821E.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l RRU3821E modules that work in UMTS, LTE FDD or MSR mode and operate in the 1800 MHz frequency
band comply with the 3GPP TS 37.104 V10.4.0 & TS 37.141 V10.4.0 protocols.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
241
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-245 RF specifications of an RRU3821E
Ty
pe
RR
U38
21E
Tr
an
sm
it
an
d
Re
cei
ve
Ch
an
ne
l
Capacity
2T
2R
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
UMTS: 2
carriers
UMTS:
-119.0
UMTS:
-121.8
LTE FDD:
1 carrier
with a
bandwidth
of 5, 10,
15, or 20
MHz
LTE FDD:
-100.0
LTE FDD:
-102.8
Output Power
Power
Consumption
Full
l When the
configuration: 2 x
output power
5 W. The typical
is 2 x 1 W, the
configurations are
power
as follows:
consumption
of an
l Output
RRU3821E is
power for the
as follows:
RRU3821E
(UMTS, 1800
MHz, 2x0.25
W)
l Output
power for the
RRU3821E
(UMTS, 1800
MHz, 2x1 W)
l Output
power for the
RRU3821E
(UMTS, 1800
MHz, 2x5 W)
– DC: 75 W
– AC: 80 W
l When the
output power
is 2 x 5 W, the
power
consumption
of an
RRU3821E in
AC scenarios
is 120 W.
l Output
power for the
RRU3821E
(LTE FDD,
1800 MHz,
2x0.25 W)
l Output
power for the
RRU3821E
(LTE FDD,
1800 MHz,
2x1 W)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
242
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
sm
it
an
d
Re
cei
ve
Ch
an
ne
l
Capacity
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Output Power
Power
Consumption
Receiver
Sensitivi
ty with
Two
Antenna
s
l Output
power for the
RRU3821E
(LTE FDD,
1800 MHz,
2x5 W)
l Output
power for the
RRU3821E
(UL MSR,
1800 MHz,
2x1 W)
l Output
power for the
RRU3821E
(UL MSR,
1800 MHz,
2x5 W)
For typical PA
configurations,
see Typical Power
Configuration for
RRU3821E in
3900 Series Base
Station Initial
Configuration
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
243
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-246 Output power for the RRU3821E (UMTS, 1800 MHz, 2 x 0.25 W)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
0.25
Table 5-247 Output power for the RRU3821E (UMTS, 1800 MHz, 2 x 1 W)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
1
2
0.5
Table 5-248 Output power for the RRU3821E (UMTS, 1800 MHz, 2 x 5 W)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
5
2
2.5
Table 5-249 Output power for the RRU3821E (LTE FDD, 1800 MHz, 2 x 0.25 W)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1
0.25
5, 10, 15, 20
1 (MIMO)
2 x 0.25
5, 10, 15, 20
Table 5-250 Output power for the RRU3821E (LTE FDD, 1800 MHz, 2 x 1 W)
Issue 05 (2014-08-30)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1
1
5, 10, 15, 20
1 (MIMO)
2x1
5, 10, 15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
244
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-251 Output power for the RRU3821E (LTE FDD, 1800 MHz, 2 x 5 W)
Mode
Total Number of LTE
FDD Carriers
Output Power per
LTE FDD Carrier (W)
Bandwidth of LTE
FDD Carrier (MHz)
LTE FDD
1
5
5, 10, 15, 20
1 (MIMO)
2x5
5, 10, 15, 20
Table 5-252 Output power for the RRU3821E (UL MSR, 1800 MHz, 2 x 1 W)
Mode
Total Number
of UMTS
Carriers
Total Number
of LTE FDD
Carriers
Output Power
per UMTS
Carrier (W)
Bandwidth of
LTE FDD
Carrier (MHz)
UMTS + LTE
FDD
1
1
0.25
5, 10, 15
2
1
0.25
5,10
1
1 (MIMO)
0.5
5, 10, 15
2
1 (MIMO)
0.5
5,10
Table 5-253 Output power for the RRU3821E (UL MSR, 1800 MHz, 2 x 5 W)
Mode
Total
Number of
UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
1
1
1.25
3.75
5, 10, 15
2
1
1.25
2.5
5, 10, 15
1
1 (MIMO)
2.5
2 x 2.5
5, 10, 15
2
1 (MIMO)
2.5
2 x 2.5
5, 10, 15
Engineering Specifications
The following table lists the equipment specifications of an RRU3821E.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
245
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-254 Equipment specifications of an RRU3821E
Type
Input Power
Dimensions (H x W x
D)
Weight (kg)
RRU3821
E
l -48 V DC; voltage
range: -57 V DC to
-36 V DC
300 mm x 240 mm x 110
mm (with the housing)
10 (with the housing)
l 100 V AC to -240 V
AC, voltage range:
100 V AC to -240 V
AC
The following table lists the environmental specifications of an RRU3821E.
Table 5-255 Environmental specifications of an RRU3821E
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3821
E
l Without
solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+55°C
The following table lists the compliance standards for an RRU3821E.
Table 5-256 Compliance standards for an RRU3821E
Type
Operating
Environment
Anti-Seismic
Performance
Protection Level
RRU3821
E
l 3GPP TS 25.141
NEBS GR63 zone4
l IP65 (outdoor)
l 3GPP TS 36.141
l IP30 (indoor)
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
246
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-257 lists the surge protection specifications of ports on an RRU3821E.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-257 Surge protection specifications of ports on an RRU3821E
Port
Surge Protection Mode
Surge Protection Specifications
Power supply
port
Surge current
Differential
mode
10 kA
Common mode
20 kA
Differential
mode
8 kA
Common mode
40 kA
RF port
Surge current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3821E.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
247
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-258 Specifications of CPRI ports on an RRU3821E
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3821E
2
1.25, 2.5, or
4.9
Star, chain,
ring, or dualstar
UMTS:
UMTS: 40
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
LTE FDD/
UL:
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
LTE FDD
(When the
CPRI data
rate is 4.9
Gbit/s):
l Uncompr
essed
CPRI
– 2T2R:
cell
band
width
≤ 10
MHz,
four
levels
; cell
band
width
≥ 15
MHz,
two
levels
– 1T2R:
cell
band
width
≥ 10
MHz,
four
levels
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The
maximum
distances of
the RRUs
from the
BBU vary
with the
types of BBP
in LTE mode
as follows:
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
248
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
l Compres
sed CPRI
– 2T2R:
cell
band
width
≥ 15
MHz,
four
levels
UL:
ty ≥
4: 20
NOTE
The
RRU3821E
supports a
maximum
distance of
20 km from
the BBU in
signal
combination
scenarios.
l CPRI
MUX: 8
Antenna Capability
The following table lists the antenna capability of an RRU3821E.
Table 5-259 Antenna capability of an RRU3821E
Type
TMA Support
Supported RET Antennas
RRU3821E
Not supported
Not supported
5.3.9 RRU3824 Technical Specifications
The RRU3824 is a type of radio remote unit. An RRU3824 working in UMTS mode supports a
maximum of four UMTS carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3824.
Table 5-260 Modes and frequency bands supported by an RRU3824
Issue 05 (2014-08-30)
Type
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
Mode
RRU3824
2100
1920 to 1980
2110 to 2170
UMTS
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
249
3900 Series Base Station
Technical Description
5 Product Specifications
RF Specifications
Table 5-261 lists radio frequency (RF) specifications of an RRU3824.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Table 5-261 RRU3824 RF specifications
Type
RRU382
4
Issue 05 (2014-08-30)
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
1T2R
four
carriers
-125.8
-128.6
-131.3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consu
mption
The
RRU382
4
supports
the
maximu
m power
configur
ation 1 x
60 W.
For
typical
configur
ations,
see the
table
Output
power
for the
RRU382
4
(UMTS,
2100
MHz).
See the
RRU382
4 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
250
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-262 Output power for the RRU3824 (UMTS, 2100 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
2
30
3
20
4
15
Engineering Specifications
The Table 5-263 lists the equipment specifications of an RRU3824.
NOTE
RRU3824 does not have the housing by default.
Table 5-263 Equipment specifications of an RRU3824
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3824
-48 V DC; voltage
range: -57 V DC to
-36 V DC
400 mm x 300 mm x
100 mm (without the
housing)
14 kg (without the
housing)
NOTE
The RRU3824
supports AC power
supply when
connected to an
external AC/DC
power module or an
OPM15M. For
details, see AC/DC
Power Module User
Guide and OPM15M
User Guide.
The following table lists the environmental specifications of an RRU3824.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
251
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-264 Environmental specifications of an RRU3824
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3824
l With
1120 W/
m2 solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l Without
solar
radiatio:
-40°C to
+55°C
NOTE
According to
the
installation
scenario,
traffic load,
and carrier
configuratio
n, the output
power of
some RRUs
may
temporarily
decrease
when they
work in the
highest 10°C
temperature
range.
The following table lists the compliance standards for an RRU3824.
Table 5-265 Compliance standards for an RRU3824
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3824
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
252
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-266 lists the surge protection specifications of ports on an RRU3824.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-266 Surge protection specifications of ports on an RRU3824
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
253
3900 Series Base Station
Technical Description
5 Product Specifications
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3824.
Table 5-267 Specifications of CPRI ports on an RRU3824
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3824
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3824.
Table 5-268 Antenna capability of an RRU3824
Type
TMA Support
RET Antenna Support
RRU3824
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.10 RRU3826 Technical Specifications
The RRU3826 is a type of radio remote unit. An RRU3826 working in UMTS mode supports a
maximum of four UMTS carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3826.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
254
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-269 Modes and frequency bands supported by an RRU3826
Type
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
Mode
RRU3826
2100
1920 to 1980
2110 to 2170
UMTS
RF Specifications
Table 5-270 lists radio frequency (RF) specifications of an RRU3826.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
255
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-270 RRU3826 RF specifications
Type
RRU382
6
RX and
TX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
1T2R
four
carriers
-125.8
-128.6
-131.3
Output
Power
Power
Consu
mption
The
RRU382
6
supports
the
maximu
m power
configur
ation 1 x
80 W.
For
typical
configur
ations,
see the
table
Output
power
for the
RRU382
6
(UMTS,
2100
MHz).
See the
RRU382
6 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-271 Output power for the RRU3826 (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
80
2
40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
256
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
3
26
4
20
Engineering Specifications
The Table 5-272 lists the equipment specifications of an RRU3826.
NOTE
RRU3826 does not have the housing by default.
Table 5-272 Equipment specifications of an RRU3826
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3826
-48 V DC; voltage
range: -57 V DC to
-36 V DC
400 mm x 300 mm x
100 mm (without the
housing)
14 kg (without the
housing)
NOTE
The RRU3826
supports AC power
supply when
connected to an
external AC/DC
power module or an
OPM15M. For
details, see AC/DC
Power Module User
Guide and OPM15M
User Guide.
The following table lists the environmental specifications of an RRU3826.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
257
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-273 Environmental specifications of an RRU3826
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3826
l With
1120 W/
m2 solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l Without
solar
radiation:
-40°C to
+55°C
NOTE
According to
the
installation
scenario,
traffic load,
and carrier
configuratio
n, the output
power of
some RRUs
may
temporarily
decrease
when they
work in the
highest 10°C
temperature
range.
The following table lists the compliance standards for an RRU3826.
Table 5-274 Compliance standards for an RRU3826
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3826
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
258
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-275 lists the surge protection specifications of ports on an RRU3826.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-275 Surge protection specifications of ports on an RRU3826
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
259
3900 Series Base Station
Technical Description
5 Product Specifications
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3826.
Table 5-276 Specifications of CPRI ports on an RRU3826
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3826
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3826.
Table 5-277 Antenna capability of an RRU3826
Type
TMA Support
RET Antenna Support
RRU3826
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.11 RRU3828 Technical Specifications
The RRU3828 is a type of radio remote unit. An RRU3828 working in UMTS mode supports a
maximum of six UMTS carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3828.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
260
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-278 Modes and frequency bands supported by an RRU3828
Type
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
Mode
RRU3828
2100
1920 to 1980
2110 to 2170
UMTS
RF Specifications
Table 5-279 lists radio frequency (RF) specifications of an RRU3828.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
261
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-279 RF Specifications
Type
RRU382
8
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
2T2R
l With
MIM
O: 4
carrie
rs
-126.1
-128.9
-131.6
l With
out
MIM
O: 6
carrie
rs
Output
Power
Power
Consu
mption
The
RRU382
8
supports
the
maximu
m power
configur
ation 2 x
40 W.
See the
RRU382
8 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
Configur
ations of
singleoutput,
MIMO,
or the
combinat
ion of the
two, and
uneven
power
configur
ations.
l For
typic
al
confi
gurati
ons in
singl
eoutpu
t or
MIM
O
scena
rios,
see
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
262
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
the
table
Outp
ut
powe
r for
the
RRU
3828
(UM
TS,
2100
MHz
).
l For
typic
al
confi
gurati
ons in
hybri
d
confi
gurati
on
scena
rios,
see
the
table
Carr
ier
comb
inati
ons
supp
orted
by
RRU
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
263
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
3828
in
hybri
d
confi
gurat
ions.
In
this
scena
rio,
one
RRU
3828
supp
orts a
maxi
mum
of six
carrie
rs.
Each
trans
mit
chan
nel
supp
orts a
maxi
mum
of
four
carrie
rs and
the
maxi
mum
outpu
t
powe
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
264
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
r of
each
trans
mit
chan
nel is
40 W.
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
RRU382
8 in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-280 Output power for the RRU3828 (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
265
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
2
Configured in one PA: 20
2
Configured in two PAs: 40
3
Configured in one PA: 13
4
Configured in one PA: 10
4
Configured in two PAs: 20
6
Configured in two PAs: 13
1 (MIMO)
2 x 40
2 (MIMO)
2 x 20
3 (MIMO)
2 x 13
4 (MIMO)
2 x 10
Table 5-281 Carrier combinations supported by RRU3828 in hybrid configurations
Number of MIMO Carriers
Number of Single-Output Carriers
1
5
2
4
3
2
Engineering Specifications
The following table lists the equipment specifications of an RRU3828.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
266
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-282 Equipment specifications of an RRU3828
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3828
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 400 mm x 220
mm x 140 mm
(without the
housing)
l 14 kg (without the
housing)
NOTE
The RRU3828
supports AC power
supply when
connected to an
external AC/DC
power module or an
OPM15M. For
details, see AC/DC
Power Module User
Guide and OPM15M
User Guide.
l 15 kg (with the
housing)
l 400 mm x 240
mm x 160 mm
(with the
housing)
The following table lists the environmental specifications of an RRU3828.
Table 5-283 Environmental specifications of an RRU3828
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3828
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l With
solar
radiation:
-40°C to
+50°C
The following table lists the compliance standards for an RRU3828.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
267
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-284 Compliance standards for an RRU3828
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3828
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-285 lists the surge protection specifications of ports on an RRU3828.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-285 Surge protection specifications of ports on an RRU3828
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Surge
current
RF port
RET port
Dry contact
or RS485
alarm port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
268
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Common
mode
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
Specifications
5 kA
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3828.
Table 5-286 Specifications of CPRI ports on an RRU3828
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3828
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3828.
Table 5-287 Antenna capability of an RRU3828
Issue 05 (2014-08-30)
Type
TMA Support
RET Antenna Support
RRU3828
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
269
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.12 RRU3829 Technical Specifications
The RRU3829 is a type of radio remote unit. An RRU3829 working in UMTS mode supports a
maximum of six UMTS carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3829.
Table 5-288 Modes and frequency bands supported by an RRU3829
Type
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
Mode
RRU3829
2100
1920 to 1980
2110 to 2170
UMTS
RF Specifications
Table 5-289 lists radio frequency (RF) specifications of an RRU3829.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels
and B receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit
channels and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band
at the antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not
exceed 0.001.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
270
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-289 RF Specifications
Type
RRU382
9
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
2T2R
l With
MIM
O: 4
carrie
rs
-126.1
-128.9
-131.6
l With
out
MIM
O: 6
carrie
rs
Output
Power
Power
Consu
mption
The
RRU382
9
supports
the
maximu
m power
configur
ation 2 x
60 W.
See the
RRU382
9 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
Configur
ations of
singleoutput,
MIMO,
or the
combinat
ion of the
two, and
uneven
power
configur
ations.
l For
typic
al
confi
gurati
ons in
singl
eoutpu
t or
MIM
O
scena
rios,
see
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
271
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
the
table
Outp
ut
powe
r for
the
RRU
3829
(UM
TS,
2100
MHz
).
l For
typic
al
confi
gurati
ons in
hybri
d
confi
gurati
on
scena
rios,
see
the
table
Carr
ier
comb
inati
ons
supp
orted
by
RRU
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
272
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
3829
in
hybri
d
confi
gurat
ions.
In
this
scena
rio,
one
RRU
3829
supp
orts a
maxi
mum
of six
carrie
rs.
Each
trans
mit
chan
nel
supp
orts a
maxi
mum
of
four
carrie
rs and
the
maxi
mum
outpu
t
powe
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
273
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
r of
each
trans
mit
chan
nel is
60 W.
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
RRU382
9 in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-290 Output power for the RRU3829 (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 60
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
274
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
2
Configured in one PA: 30
2
Configured in two PAs: 60
3
Configured in one PA: 20
4
Configured in one PA: 15
4
Configured in two PAs: 30
6
Configured in two PAs: 20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 30
3 (MIMO)
2 x 20
4 (MIMO)
2 x 15
Table 5-291 Carrier combinations supported by RRU3829 in hybrid configurations
Number of MIMO Carriers
Number of Single-Output Carriers
1
5
2
4
3
2
Equipment Specifications
The following table lists the equipment specifications of an RRU3829.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
275
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-292 Equipment specifications of an RRU3829
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3829
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270
mm x 140 mm
(without the
housing)
l 20 kg (without the
housing)
NOTE
The RRU3829
supports AC power
supply when
connected to an
external AC/DC
power module or an
OPM15M. For
details, see AC/DC
Power Module User
Guide and OPM15M
User Guide.
l 22 kg (with the
housing)
l 485 mm x 300
mm x 170 mm
(with the
housing)
The following table lists the environmental specifications of an RRU3829.
Table 5-293 Environmental specifications of an RRU3829
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3829
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l With
solar
radiation:
-40°C to
+50°C
The following table lists the compliance standards for an RRU3829.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
276
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-294 Compliance standards for an RRU3829
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3829
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-295 lists the surge protection specifications of ports on an RRU3829.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-295 Surge protection specifications of ports on an RRU3829
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 kA
277
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
Specifications
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3829.
Table 5-296 Specifications of CPRI ports on an RRU3829
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3829
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3829.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
278
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-297 Antenna capability of an RRU3829
Type
TMA Support
RET Antenna Support
RRU3829
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.13 RRU3832 Technical Specifications
The RRU3832 is a type of radio remote unit. An RRU3832 working in UMTS mode supports a
maximum of six UMTS carriers. If it works in LTE FDD mode, it supports two LTE FDD
carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3832.
Table 5-298 Modes and frequency bands supported by an RRU3832
Type
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
Mode
RRU3832
2100
1920 to 1980
2110 to 2170
UMTS
AWS
1710 to 1755
2110 to 2155
UMTS, LTE
FDD, and UL
RF Specifications
Table 5-299 lists radio frequency (RF) specifications of an RRU3832.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
279
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-299 RF Specifications
Type
RRU383
2
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
2T4R
UMTS:
UMTS:
-126.1
UMTS:
-128.9
UMTS:
-131.6
LTE
FDD:
-106.5
LTE
FDD:
-109.3
LTE
FDD:
-112.0
l With
MIM
O: 4
carrie
rs
l With
out
MIM
O: 6
carrie
rs
LTE
FDD: 2
carriers.
The
bandwid
th per
carrier is
5, 10, 15,
or 20
MHz.
The total
bandwid
th
between
the
maximu
m
frequenc
y and the
minimu
m
frequenc
y of two
carriers
cannot
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consu
mption
The
maximu
m power
configur
ation is 2
x 60 W.
See the
RRU383
2 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
l UMT
S:
supp
orts
confi
gurati
ons of
singl
eoutpu
t,
MIM
O, or
the
comb
inatio
n of
the
two,
and
unev
en
powe
r
confi
gurati
ons.
–F
or
ty
pi
280
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
exceed
60 MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
ca
l
co
nf
ig
ur
ati
on
s
in
si
ng
le
ou
tp
ut
or
M
I
M
O
sc
en
ar
io
s,
se
e
th
e
ta
b
le
O
ut
p
ut
p
281
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
o
w
er
fo
r
th
e
R
R
U
38
32
(
U
M
T
S,
A
W
S/
21
00
M
H
z).
–F
or
ty
pi
ca
l
co
nf
ig
ur
ati
on
s
in
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
282
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
hy
br
id
co
nf
ig
ur
ati
on
sc
en
ar
io
s,
se
e
th
e
ta
b
le
C
ar
ri
er
co
m
bi
n
at
io
ns
su
p
p
or
te
d
b
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
283
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
y
R
R
U
38
32
in
h
y
br
id
co
nf
ig
ur
at
io
ns
.
In
th
is
sc
en
ar
io,
on
e
R
R
U
38
32
su
pp
or
ts
a
m
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
284
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
ax
i
m
u
m
of
si
x
ca
rri
er
s.
E
ac
h
tr
an
s
m
it
ch
an
ne
l
su
pp
or
ts
a
m
ax
i
m
u
m
of
fo
ur
ca
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
285
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
rri
er
s
an
d
th
e
m
ax
i
m
u
m
ou
tp
ut
po
w
er
of
ea
ch
tr
an
s
m
it
ch
an
ne
l
is
60
W
.
l LTE
FDD:
For
typic
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
286
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
al
confi
gurati
ons,
see
the
table
Outp
ut
powe
r for
the
RRU
3832
(LTE
FDD,
AWS
).
l UL:
For
typic
al
confi
gurati
ons,
see
the
table
Outp
ut
powe
r for
the
RRU
3832
(UL,
AWS
).
For
typical
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
287
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
PA
configur
ations,
see
Typical
Power
Configur
ation for
RRU383
2 in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-300 Output power for the RRU3832 (UMTS, AWS/2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 60
2
Configured in one PA: 30
2
Configured in two PAs: 60
3
Configured in one PA: 20
4
Configured in one PA: 15
4
Configured in two PAs: 30
6
Configured in two PAs: 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
288
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
1 (MIMO)
2 x 40
2 (MIMO)
2 x 30
3 (MIMO)
2 x 20
4 (MIMO)
2 x 15
Table 5-301 Carrier combinations supported by RRU3832 in hybrid configurations
Number of MIMO Carriers
Number of Single-Output Carriers
1
5
2
4
3
2
Table 5-302 Output power for the RRU3832 (LTE FDD, AWS)
Mode
Total Number of
LTE FDD
Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 20
5
1 (MIMO)
2 x 40
10
1 (MIMO)
2 x 60
5, 10, 15, 20
2 (MIMO)
2 x 20
5, 10, 15, 20
2 (MIMO)
2 x 30
5, 10, 15, 20
2 (MIMO)
l Carrier1: 2 x 20
l Carrier1: 5, 10
l Carrier2: 2 x 40
l Carrier2: 10, 20
l Carrier1: 2 x 15
l Carrier1: 5
l Carrier2: 2 x 45
l Carrier2: 15
2 (MIMO)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
289
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-303 Output power for the RRU3832 (UL, AWS)
Mode
Total
Number of
UMTS
Carriers
Total
Number
of LTE
FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
1 (MIMO)
1 (MIMO)
2 x 20
2 x 40
5, 10, 15, 20
1 (MIMO)
1 (MIMO)
2 x 30
2 x 30
5, 10, 15, 20
1 (MIMO)
1 (MIMO)
2 x 40
2 x 20
5, 10, 15, 20
1
1 (MIMO)
Configured in
one PA: 20
2 x 40
5, 10, 15, 20
1
1 (MIMO)
Configured in
one PA: 30
2 x 30
5, 10, 15, 20
1
1 (MIMO)
Configured in
one PA: 40
2 x 20
5, 10, 15, 20
2
1 (MIMO)
Configured in
two PAs: 20
2 x 40
5, 10, 15, 20
2
1 (MIMO)
Configured in
two PAs: 30
2 x 30
5, 10, 15, 20
2
1 (MIMO)
Configured in
two PAs: 40
2 x 20
5, 10, 15, 20
3
1 (MIMO)
Configured in
two PAs: 20
2 x 20
5, 10, 15, 20
4
1 (MIMO)
Configured in
two PAs: 20
2 x 20
5, 10, 15, 20
1+1
(MIMO)
1 (MIMO)
Configured in
two PAs: 20
2 x 20
5, 10, 15, 20
Equipment Specifications
Table 5-304 lists the equipment specifications of an RRU3832.
NOTE
RRU3832 does not have the housing by default.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
290
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-304 Equipment specifications of an RRU3832
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3832
-48 V DC; voltage
range: -57 V DC to
-36 V DC
400 mm x 300 mm x
100 mm (without the
housing)
14 kg (without the
housing)
NOTE
The RRU3832
supports AC power
supply when
connected to an
external AC/DC
power module or an
OPM15M. For
details, see AC/DC
Power Module User
Guide and OPM15M
User Guide.
The following table lists the environmental specifications of an RRU3832.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
291
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-305 Environmental specifications of an RRU3832
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3832
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l With
solar
radiation:
-40°C to
+50°C
NOTE
According to
the
installation
scenario,
traffic load,
and carrier
configuratio
n, the output
power of
some RRUs
may
temporarily
decrease
when they
work in the
highest 10°C
temperature
range.
The following table lists the compliance standards for an RRU3832.
Table 5-306 Compliance standards for an RRU3832
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3832
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l 3GPP TS 36.141
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
292
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-307 lists the surge protection specifications of ports on an RRU3832.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-307 Surge protection specifications of ports on an RRU3832
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
RET port
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3832.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
293
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-308 Specifications of CPRI ports on an RRU3832
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3832
2
1.25, 2.5, or
4.9
Star, chain,
ring, or dualstar
UMTS:
UMTS: 40
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
LTE FDD/
UL:
l When the
rate at the
CPRI
port is 2.5
Gbit/s or
4.9 Gbit/
s: 8
LTE FDD:
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The
maximum
distances of
the RRUs
from the
BBU vary
with the
types of BBP
in LTE mode
as follows:
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
294
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
equal
to 5
MHz.
ty ≥
4: 20
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
l When the
rate at the
CPRI
port is 4.9
Gbit/s:
– Four
levels
are
suppo
rted if
the
cell
band
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
295
3900 Series Base Station
Technical Description
5 Product Specifications
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
width
is less
than
or
equal
to 10
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
UL:
l CPRI
MUX: 4
Antenna Capability
The following table lists the antenna capability of an RRU3832.
Table 5-309 Antenna capability of an RRU3832
Type
TMA Support
RET Antenna Support
RRU3832
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
296
3900 Series Base Station
Technical Description
5 Product Specifications
5.3.14 RRU3838 Technical Specifications
The RRU3838 is a type of radio remote unit. An RRU3838 supports a maximum of six UMTS
carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3838.
Table 5-310 Modes and frequency bands supported by an RRU3838
Type
Mode
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
RRU3838
UMTS
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-311 lists radio frequency (RF) specifications of an RRU3838.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity, as recommended in 3GPP TS 25.104, is measured at the antenna connector
on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l Maximum output power = Maximum output power of the PA - Internal loss. The maximum output power
is measured at the antenna port.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
297
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-311 RF Specifications
Type
RRU383
8
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
2T2R
l With
MIM
O: 4
carrie
rs
-126.1
-128.9
-131.6
l With
out
MIM
O: 6
carrie
rs
Output
Power
Power
Consu
mption
The
RRU383
8
supports
the
maximu
m power
configur
ation 2 x
40 W,
configur
ations of
singleoutput,
MIMO,
or the
combinat
ion of the
two, and
uneven
power
configur
ations.
See the
RRU383
8 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
l For
typic
al
confi
gurati
ons in
single
outpu
t or
MIM
O
scena
rios,
see
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
298
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
the
table
Outp
ut
powe
r for
the
RRU
3838
(UM
TS,
2100
MHz
).
l For
typic
al
confi
gurati
ons in
hybri
d
confi
gurati
on
scena
rios,
see
the
table
Carri
er
comb
inati
ons
supp
orted
by
RRU
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
299
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
3838
in
hybri
d
confi
gurat
ions.
In
this
scena
rio,
one
RRU
3838
suppo
rts a
maxi
mum
of six
carrie
rs.
Each
trans
mit
chann
el
suppo
rts a
maxi
mum
of
four
carrie
rs and
the
maxi
mum
outpu
t
powe
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
300
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
r of
each
trans
mit
chann
el is
40 W.
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
RRU383
8 in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-312 Output power for the RRU3838 (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
301
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
2
Configured in one PA: 20
2
Configured in two PAs: 40
3
Configured in one PA: 13
4
Configured in one PA: 10
4
Configured in two PAs: 20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 20
3 (MIMO)
2 x 13
4 (MIMO)
2 x 10
Table 5-313 Carrier combinations supported by RRU3838 in hybrid configurations
Number of MIMO Carriers
Number of Single-Output Carriers
1
5
2
4
3
2
Equipment Specifications
Table 5-314 lists the equipment specifications of an RRU3838.
NOTE
RRU3838 does not have the housing by default.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
302
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-314 Equipment specifications of an RRU3838
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3838
-48 V DC; voltage
range: -57 V DC to
-36 V DC
400 mm x 300 mm x
100 mm (without the
housing)
14 kg (without the
housing)
NOTE
The RRU3838
supports AC power
supply when
connected to an
external AC/DC
power module or an
OPM15M. For
details, see AC/DC
Power Module User
Guide and OPM15M
User Guide.
The following table lists the environmental specifications of an RRU3838.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
303
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-315 Environmental specifications of an RRU3838
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3838
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l With
solar
radiation:
-40°C to
+50°C
NOTE
According to
the
installation
scenario,
traffic load,
and carrier
configuratio
n, the output
power of
some RRUs
may
temporarily
decrease
when they
work in the
highest 10°C
temperature
range.
The following table lists the compliance standards for an RRU3838.
Table 5-316 Compliance standards for an RRU3838
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3838
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
304
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-317 lists the surge protection specifications of ports on an RRU3838.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-317 Surge protection specifications of ports on an RRU3838
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
RET port
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3838.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
305
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-318 Specifications of CPRI ports on an RRU3838
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3838
2
1.25 or 2.5
Star, chain or
ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3838.
Table 5-319 Antenna capability of an RRU3838
Type
TMA Support
RET Antenna Support
RRU3838
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.15 RRU3839 Technical Specifications
An RRU3839, which is a remote radio unit for UMTS, supports a maximum of six carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3839.
Table 5-320 Modes and frequency bands supported by an RRU3839
Issue 05 (2014-08-30)
Type
Mode
Frequency
Band (MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
RRU3839
UMTS
2100
1920 to 1980
2110 to 2170
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
306
3900 Series Base Station
Technical Description
5 Product Specifications
RF Specifications
Table 5-321 lists radio frequency (RF) specifications of an RRU3839.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels
and B receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit
channels and the maximum output power of each transmit channel is D W.
l The UMTS receiver sensitivity, as recommended in 3GPP TS 25.104, is measured at the antenna
connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
307
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-321 RF Specifications
Type
RRU383
9
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
2T2R
l With
MIM
O: 4
carrie
rs
-126.1
-128.9
-131.6
l With
out
MIM
O: 6
carrie
rs
Output
Power
Power
Consu
mption
The
RRU383
9
supports
the
maximu
m power
configur
ation 2 x
60 W,
configur
ations of
singleoutput,
MIMO,
or the
combinat
ion of the
two, and
uneven
power
configur
ations.
See the
RRU383
9 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specifica
tions.
l For
typic
al
confi
gurati
ons in
singl
eoutpu
t or
MIM
O
scena
rios,
see
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
308
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
the
table
Outp
ut
powe
r for
the
RRU
3839
(UM
TS,
2100
MHz
).
l For
typic
al
confi
gurati
ons in
hybri
d
confi
gurati
on
scena
rios,
see
the
table
Carr
ier
comb
inati
ons
supp
orted
by
RRU
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
309
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
3839
in
hybri
d
confi
gurat
ions.
In
this
scena
rio,
one
RRU
3839
supp
orts a
maxi
mum
of six
carrie
rs.
Each
trans
mit
chan
nel
supp
orts a
maxi
mum
of
four
carrie
rs and
the
maxi
mum
outpu
t
powe
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
310
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX and
RX
Channe
l
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consu
mption
r of
each
trans
mit
chan
nel is
40 W.
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
RRU383
9 in 3900
Series
Base
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-322 Output power for the RRU3839 (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
Configured in one PA: 60
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
311
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
2
Configured in one PA: 30
2
Configured in two PAs: 60
3
Configured in one PA: 20
4
Configured in one PA: 15
4
Configured in two PAs: 30
1 (MIMO)
2 x 40
2 (MIMO)
2 x 30
3 (MIMO)
2 x 20
4 (MIMO)
2 x 15
Table 5-323 Carrier combinations supported by RRU3839 in hybrid configurations
Number of MIMO Carriers
Number of Single-Output Carriers
1
5
2
4
3
2
Equipment Specifications
The following table lists the equipment specifications of an RRU3839.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
312
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-324 Equipment specifications of an RRU3839
Type
Input Power
Dimensions (H x
W x D)
Weight
RRU3839
-48 V DC; voltage
range: -57 V DC to
-36 V DC
400 mm x 300 mm x
100 mm (without the
housing)
14 kg (without the
housing)
NOTE
The RRU3839
supports AC power
supply when
connected to an
external AC/DC
power module or an
OPM15M. For
details, see AC/DC
Power Module User
Guide and OPM15M
User Guide.
The following table lists the environmental specifications of an RRU3839.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
313
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-325 Environmental specifications of an RRU3839
Type
Operating
Temperatu
re
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU3839
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommende
d that the
device be
installed and
used within
one year
after its
delivery
because of
the failure
rate.
l With
solar
radiation:
-40°C to
+50°C
NOTE
According to
the
installation
scenario,
traffic load,
and carrier
configuratio
n, the output
power of
some RRUs
may
temporarily
decrease
when they
work in the
highest 10°C
temperature
range.
The following table lists the compliance standards for an RRU3839.
Table 5-326 Compliance standards for an RRU3839
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3839
l 3GPP TS 25.141
NEBS GR63 zone4
IP65
l ETSI EN
300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
314
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-327 lists the surge protection specifications of ports on an RRU3839.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-327 Surge protection specifications of ports on an RRU3839
Port
Usage
Scenario
Surge Protection Mode
Specifications
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 µs)
Common
mode
4 kV (1.2/50 µs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Local power
monitoring
and alarm
port
Monitored
power and
RRUs are
installed in
back-toback mode
or within 1
m.
Surge
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
315
3900 Series Base Station
Technical Description
5 Product Specifications
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3839.
Table 5-328 Specifications of CPRI ports on an RRU3839
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3839
2
1.25, 2.5, or
4.9
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s: 4
40
l When the
rate at the
CPRI
port is 2.5
Gbit/s or
4.9 Gbit/
s: 8
Antenna Capability
The following table lists the antenna capability of an RRU3839.
Table 5-329 Antenna capability of an RRU3839
Type
TMA Support
RET Antenna Support
RRU3839
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.16 RRU3201 Technical Specifications
An RRU3201, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3201.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
316
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-330 Modes and frequency bands supported by an RRU3201
Type
Mode
Frequency
Band (MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3201
LTE FDD
700 (band 13)
777 to 787
746 to 756
2600 (band 7)
Band C: 2500 to
2520
Band C: 2620 to
2640
Band D: 2510 to
2560
Band D: 2630 to
2680
Band E: 2550 to
2570
Band E: 2670 to
2690
RF Specifications
Table 5-331 lists radio frequency (RF) specifications of an RRU3201.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
317
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-331 RF specifications of an RRU3201
Type
RRU3
201
TX
and
RX
Chan
nel
Capacity
2T2R
l 700 MHz: One
carrier with a
bandwidth of 5
or 10 MHz.
NOTE
The
RRU
3201
does
not
suppo
rt the
1T2R
confi
gurati
on.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-105.8
-108.6
l 2600 MHz:
Two carriers.
The bandwidth
per carrier is 15
MHz or the
continuous
bandwidth of
the two carriers
is 10 MHz+10
MHz, or the
bandwidth of
one carrier is 20
MHz and the
bandwidth of
the other carrier
is 10 MHz.
Output
Power
Power
Consum
ption
The
maximum
power
configurat
ion is 2 x
40 W. The
typical
configurat
ions are as
follows:
See the
RRU3201
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
l Outpu
t
power
for the
RRU3
201
(LTE
FDD,
700
MHz
MHz)
l Outpu
t
power
for the
RRU3
201
(LTE
FDD,
2600
MHz)
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
318
3900 Series Base Station
Technical Description
Type
5 Product Specifications
TX
and
RX
Chan
nel
Capacity
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Output
Power
Receiver
Sensitivi
ty with
Two
Antenna
s
Power
Consum
ption
RRU3201
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-332 Output power for the RRU3201 (LTE FDD, 700 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10
Table 5-333 Output power for the RRU3201 (LTE FDD, 2600 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
5, 10, 15, 20
2 (MIMO)
2 x 20
10,15
2 (MIMO)
l carrier1: 2 x 13
l carrier1: 10
l carrier2: 2 x 27
l carrier2: 20
Engineering Specifications
The following table lists the equipment specifications of an RRU3201.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
319
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-334 Equipment specifications of an RRU3201
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3201
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270 mm x 140
mm (18 L, without the
housing)
l ≤ 17.5 (without
the housing)
l 485 mm x 285 mm x 170
mm (23.5 L, with the
housing)
l ≤ 19 (with the
housing)
The following table lists the environmental specifications of an RRU3201.
Table 5-335 Environmental specifications of an RRU3201
Type
Operatin
g
Temperat
ure
Relative
Humidity
Absolute
Humidity
Atmospher
ic Pressure
Storage
Time
RRU32
01
l With
solar
radiatio
n of
1120
W/m2:
-40°C
to +50°
C
5% RH to 100%
RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommende
d that the
device be
installed and
used within
one year after
its delivery
because of
the failure
rate.
l Without
solar
radiatio
n: -40°
C to
+55°C
The following table lists the compliance standards for an RRU3201.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
320
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-336 Compliance standards for an RRU3201
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3201
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-337 lists the surge protection specifications of ports on an RRU3201.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-337 Surge protection specifications of ports on an RRU3201
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3201.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
321
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-338 Specifications of CPRI ports on an RRU3201
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3201
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
322
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
Antenna Capability
The following table lists the antenna capability of an RRU3201.
Table 5-339 Antenna capability of an RRU3201
Type
TMA Support
Supported RET Antennas
RRU3201
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.17 RRU3203 Technical Specifications
An RRU3203, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3203.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
323
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-340 Modes and frequency bands supported by an RRU3203
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3203
LTE FDD
700 (band 12)
698 to 716
728 to 746
RF Specifications
Table 5-341 lists radio frequency (RF) specifications of an RRU3203.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
324
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-341 RF specifications of an RRU3203
Type
RRU3
203
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers with a
bandwidth of 1.4,
3, 5, 10, 15, or 20
MHz
NOTE
The
RRU
3203
does
not
suppo
rt the
1T2R
confi
gurati
on.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-105.8
-108.6
Output
Power
Power
Consum
ption
The
RRU3203
supports
the
maximum
power
configurat
ion 2 x 40
W.
See the
RRU3203
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
configurat
ions, see
the table
Output
power for
the
RRU3203
(LTE
FDD, 700
MHz).
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3203
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
325
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-342 Output power for the RRU3203 (LTE(FDD), 700 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15
2 (MIMO)
2 x 20
5
Engineering Specifications
The following table lists the equipment specifications of an RRU3203.
Table 5-343 Equipment specifications of an RRU3203
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3203
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 356 mm x 140
mm (24 L, without the
housing)
l ≤ 21 (without the
housing)
l 485 mm x 381 mm x 170
mm (31.4 L, with the
housing)
l ≤ 24 (with the
housing)
The following table lists the environmental specifications of an RRU3203.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
326
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-344 Environmental specifications of an RRU3203
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosphe
ric
Pressure
Storage
Time
RRU32
03
l With solar
radiation of
1120 W/m2:
-40°C to +50°
C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommend
ed that the
device be
installed
and used
within one
year after its
delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
The following table lists the compliance standards for an RRU3203.
Table 5-345 Compliance standards for an RRU3203
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3203
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-346 lists the surge protection specifications of ports on an RRU3203.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-346 Surge protection specifications of ports on an RRU3203
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
2 kV (1.2/50 μs)
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
327
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Surge
current
RF port
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specification
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3203.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
328
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-347 Specifications of CPRI ports on an RRU3203
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3203
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
329
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
Antenna Capability
The following table lists the antenna capability of an RRU3203.
Table 5-348 Antenna capability of an RRU3203
Type
TMA Support
Supported RET Antennas
RRU3203
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.18 RRU3220 Technical Specifications
An RRU3220, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3220.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
330
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-349 Modes and frequency bands supported by an RRU3220
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3220
LTE FDD
DD 800 (band 20)
832 to 847
791 to 806
842 to 862
801 to 821
RF Specifications
Table 5-350 lists radio frequency (RF) specifications of an RRU3220.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
331
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-350 RF specifications of an RRU3220
Type
RRU3
220
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.1
-108.9
l One carrier
with a
bandwidth of
1.4, 3, 5, 10, 15,
or 20 MHz.
l Two carriers
(high 20 MHz):
the bandwidth
per carrier is 10
MHz.
Output
Power
Power
Consum
ption
The
RRU3220
supports
the
maximum
power
configurat
ion 2 x 40
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3220
(LTE
FDD, DD
800 MHz)
table.
See the
RRU3220
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3220
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
332
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-351 Output power for the RRU3220 (LTE FDD, DD 800 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 20
10
Engineering Specifications
The following table lists the equipment specifications of an RRU3220.
Table 5-352 Equipment specifications of an RRU3220
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3220
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 400 mm x 220 mm x 140
mm (12 L, without the
housing)
l ≤ 13.5 (without
the housing)
l 400 mm x 240 mm x 160
mm (15 L, with the
housing)
l ≤ 15 (with the
housing)
The following table lists the environmental specifications of an RRU3220.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
333
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-353 Environmental specifications of an RRU3220
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
20
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
The following table lists the compliance standards for an RRU3220.
Table 5-354 Compliance standards for an RRU3220
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3220
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-355 lists the surge protection specifications of ports on an RRU3220.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-355 Surge protection specifications of ports on an RRU3220
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
2 kV (1.2/50 μs)
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
334
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specification
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3220.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
335
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-356 Specifications of CPRI ports on an RRU3220
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3220
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
336
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
Antenna Capability
The following table lists the antenna capability of an RRU3220.
Table 5-357 Antenna capability of an RRU3220
Type
TMA Support
Supported RET Antennas
RRU3220
Not supported
AISG2.0 and AISG1.1
NOTE
l When an RRU3220 uses a tower mounted amplifier (TMA), a bias tee (BT) is required.
l For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.19 RRU3221 Technical Specifications
An RRU3221, which is a remote radio unit for LTE FDD, supports a maximum of two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3221.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
337
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-358 Modes and frequency bands supported by an RRU3221
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3221
LTE FDD
2600 (band 7)
2500 to 2570
2620 to 2690
RF Specifications
Table 5-359 lists radio frequency (RF) specifications of an RRU3221.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
338
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-359 RF specifications of an RRU3221
Type
RRU3
221
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz; the
total bandwidth
between the
maximum
frequency and the
minimum
frequency of the
spectrums for two
carriers does not
exceed 40 MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.0
-108.8
Output
Power
Power
Consum
ption
The
RRU3221
supports
the
maximum
power
configurat
ion 2 x 40
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3221
(LTE
FDD,
2600
MHz)
table.
See the
RRU3221
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3221
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
339
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-360 Output power for the RRU3221 (LTE FDD, 2600 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
5, 10, 15, 20
2 (MIMO)
2 x 20
5, 10, 15, 20
Engineering Specifications
The following table lists the equipment specifications of an RRU3221.
Table 5-361 Equipment specifications of an RRU3221
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3221
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270 mm x 140
mm (18 L, without the
housing)
l ≤ 20 (without the
housing)
NOTE
The RRU3221
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
l 485 mm x 300 mm x 170
mm (25 L, with the
housing)
l ≤ 22 (with the
housing)
The following table lists the environmental specifications of an RRU3221.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
340
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-362 Environmental specifications of an RRU3221
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
21
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°C
to +55°C
The following table lists the compliance standards for an RRU3221.
Table 5-363 Compliance standards for an RRU3221
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3221
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-364 lists the surge protection specifications of ports on an RRU3221.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-364 Surge protection specifications of ports on an RRU3221
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
2 kV (1.2/50 μs)
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
341
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specification
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3221.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
342
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-365 Specifications of CPRI ports on an RRU3221
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3221
2
1.25, 2.5, or
4.9
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
343
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
l When the
rate at the
CPRI
port is 4.9
Gbit/s:
– Four
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 10
MHz.
– Two
levels
are
suppo
rted if
the
cell
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
344
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
band
width
is
greate
r than
or
equal
to 15
MHz.
Antenna Capability
The following table lists the antenna capability of an RRU3221.
Table 5-366 Antenna capability of an RRU3221
Type
TMA Support
Supported RET Antennas
RRU3221
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.20 RRU3222 Technical Specifications
An RRU3222, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3222.
Table 5-367 Modes and frequency bands supported by an RRU3222
Issue 05 (2014-08-30)
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3222
LTE FDD
DD 800 (band 20)
832 to 862
791 to 821
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
345
3900 Series Base Station
Technical Description
5 Product Specifications
RF Specifications
Table 5-368 lists radio frequency (RF) specifications of an RRU3222.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
346
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-368 RF specifications of an RRU3222
Type
RRU3
222
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.4
-109.2
l One carrier
with a
bandwidth of 5,
10, 15, or 20
MHz.
l Two carriers:
the continuous
bandwidth of
the two carriers
is 10 MHz+10
MHz.
Output
Power
Power
Consum
ption
The
RRU3222
supports
the
maximum
power
configurat
ion 2 x 40
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3222
(LTE
FDD, DD
800 MHz)
table.
See the
RRU3222
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3222
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
347
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-369 Output power for the RRU3222 (LTE FDD, DD 800 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 20
10
Engineering Specifications
The following table lists the equipment specifications of an RRU3222.
Table 5-370 Equipment specifications of an RRU3222
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3222
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270 mm x 140
mm (18 L, without the
housing)
l ≤ 17.5 (without
the housing)
l 485 mm x 300 mm x 170
mm (25 L, with the
housing)
l ≤ 20 (with the
housing)
The following table lists the environmental specifications of an RRU3222.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
348
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-371 Environmental specifications of an RRU3222
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU322
2
l With solar
radiation of
1120 W/m2:
-40°C to +50°
C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
The following table lists the compliance standards for an RRU3222.
Table 5-372 Compliance standards for an RRU3222
Type
Operating Environment
Anti-seismic
Performance
Protection Rating
RRU3222
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04) Class
4.1: "Nonweatherprotected
locations"
Table 5-373 lists the surge protection specifications of ports on an RRU3222.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-373 Surge protection specifications of ports on an RRU3222
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
2 kV (1.2/50 μs)
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
349
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specification
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3222.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
350
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-374 Specifications of CPRI ports on an RRU3222
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3222
2
1.25 or 2.5
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
351
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
Antenna Capability
The following table lists the antenna capability of an RRU3222.
Table 5-375 Antenna capability of an RRU3222
Type
TMA Support
Supported RET Antennas
RRU3222
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.21 RRU3229 Technical Specifications
An RRU3229, which is a remote radio unit for LTE FDD, supports a maximum of two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3229.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
352
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-376 Modes and frequency bands supported by an RRU3229
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3229
LTE
FDD
2600 (band 7)
2500 to 2570
2620 to 2690
RF Specifications
Table 5-377 lists radio frequency (RF) specifications of an RRU3229.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
353
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-377 RF specifications of an RRU3229
Type
RRU3
229
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz; the
total bandwidth
between the
maximum
frequency and the
minimum
frequency of the
spectrums for two
carriers does not
exceed 40 MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.0
-108.8
Output
Power
Power
Consum
ption
The
RRU3229
supports
the
maximum
power
configurati
on 2 x 60
W. For
typical
configurati
ons, see
the
Output
power for
the
RRU3229
(LTE
FDD,
2600
MHz)
table.
See the
RRU3229
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurati
ons, see
Typical
Power
Configurat
ion for
RRU3229
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
354
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-378 Output power for the RRU3229 (LTE FDD , 2600 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 60
10, 15, 20
2 (MIMO)
2 x 30
5, 10, 15, 20
Engineering Specifications
The following table lists the equipment specifications of an RRU3229.
Table 5-379 Equipment specifications of an RRU3229
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3229
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270 mm x 140
mm (18 L, without the
housing)
l ≤ 20 (without the
housing)
NOTE
The RRU3229
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
l 485 mm x 300 mm x 170
mm (25 L, with the
housing)
l ≤ 22 (with the
housing)
The following table lists the environmental specifications of an RRU3229.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
355
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-380 Environmental specifications of an RRU3229
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
29
l With solar
radiation of 1120
W/m2: -40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°C
to +55°C
The following table lists the compliance standards for an RRU3229.
Table 5-381 Compliance standards for an RRU3229
Type
Operating Environment
Anti-seismic
Performance
Protection Rating
RRU3229
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04) Class
4.1: "Nonweatherprotected
locations"
Table 5-382 lists the surge protection specifications of ports on an RRU3229.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-382 Surge protection specifications of ports on an RRU3229
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
2 kV (1.2/50 μs)
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
356
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specification
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3229.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
357
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-383 Specifications of CPRI ports on an RRU3229
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3229
2
1.25, 2.5, or
4.9
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
358
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
l When the
rate at the
CPRI
port is 4.9
Gbit/s:
– Four
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 10
MHz.
– Two
levels
are
suppo
rted if
the
cell
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
359
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
band
width
is
greate
r than
or
equal
to 15
MHz.
Antenna Capability
The following table lists the antenna capability of an RRU3229.
Table 5-384 Antenna capability of an RRU3229
Type
TMA Support
Supported RET Antennas
RRU3229
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.22 RRU3240 Technical Specifications
An RRU3240, which is a remote radio unit for LTE FDD, supports a maximum of two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3240.
Table 5-385 Modes and frequency bands supported by an RRU3240
Issue 05 (2014-08-30)
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3240
LTE FDD
2600 (band 7)
2500 to 2570
2620 to 2690
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
360
3900 Series Base Station
Technical Description
5 Product Specifications
RF Specifications
Table 5-386 lists radio frequency (RF) specifications of an RRU3240.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
361
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-386 RF specifications of an RRU3240
Type
RRU3
240
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T4R
Two carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz; the
total bandwidth
between the
maximum
frequency and the
minimum
frequency of the
spectrums for two
carriers does not
exceed 40 MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.0
-108.8
Output
Power
Power
Consum
ption
The
RRU3240
supports
the
maximum
power
configurat
ion 2 x 40
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3240
(LTE
FDD,
2600MHz
) table.
See the
RRU3240
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3240
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
362
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-387 Output power for the RRU3240 (LTE FDD, 2600 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
5, 10, 15, 20
2 (MIMO)
2 x 20
5, 10, 15, 20
Engineering Specifications
The following table lists the equipment specifications of an RRU3240.
Table 5-388 Equipment specifications of an RRU3240
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3240
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 270 mm x 140
mm (18 L, without the
housing)
l ≤ 20 (without the
housing)
NOTE
The RRU3240
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
l 485 mm x 300 mm x 170
mm (25 L, with the
housing)
l ≤ 22 (with the
housing)
The following table lists the environmental specifications of an RRU3240.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
363
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-389 Environmental specifications of an RRU3240
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
40
l With solar
radiation of 1120
W/m2: -40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30
g/m3
70 kPa to
106 kPa
It is
recommen
ded that
the device
be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°C to
+55°C
The following table lists the compliance standards for an RRU3240.
Table 5-390 Compliance standards for an RRU3240
Type
Operating Environment
Anti-seismic
Performance
Protection Rating
RRU3240
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04) Class
4.1: "Nonweatherprotected
locations"
Table 5-391 lists the surge protection specifications of ports on an RRU3240.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
364
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-391 Surge protection specifications of ports on an RRU3240
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
250 A
Common
mode
250 A
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3240.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
365
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-392 Specifications of CPRI ports on an RRU3240
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3240
2
1.25, 2.5, or
4.9
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Two
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
366
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
or
equal
to 10
MHz.
l When the
rate at the
CPRI
port is 4.9
Gbit/s:
– Two
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 10
MHz.
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
367
3900 Series Base Station
Technical Description
5 Product Specifications
Antenna Capability
The following table lists the antenna capability of an RRU3240.
Table 5-393 Antenna capability of an RRU3240
Type
TMA Support
Supported RET Antennas
RRU3240
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.23 RRU3260 Technical Specifications
An RRU3260, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3260.
Table 5-394 Modes and frequency bands supported by an RRU3260
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3260
LTE FDD
2600 (band 7)
2500 to 2570
2620 to 2690
RF Specifications
Table 5-395 lists radio frequency (RF) specifications of an RRU3260.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
368
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-395 RF specifications of an RRU3260
Type
RRU3
260
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T4R
Two carriers.
The bandwidth
per carrier is 5,
10, 15, or 20
MHz; the total
bandwidth
between the
maximum
frequency and
the minimum
frequency of
the spectrums
for two carriers
does not exceed
50 MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivit
y with
One
Antenna
Receiver
Sensitivit
y with
Two
Antennas
-106.5
-109.3
Output
Power
Power
Consump
tion
The
RRU3260
supports
the
maximum
power
configurati
on 2 x 40
W. For
typical
configurati
ons, see the
Output
power for
the
RRU3260
(LTE
FDD, 2600
MHz)
table.
See the
RRU3260
sheet in
3900 Series
Base
Station
Power
Consumpti
on
Specificati
ons.
For typical
PA
configurati
ons, see
Typical
Power
Configurati
on for
RRU3260
in 3900
Series Base
Station
Initial
Configurati
on Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
369
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-396 Output power for the RRU3260 (LTE FDD, 2600 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
5,10,15,20
2 (MIMO)
2 x 20
5,10,15,20
2 (MIMO)
l carrier 1: 2 x 13
l carrier 1: 5,10
l carrier 2: 2 x 27
l carrier 2: 10,20
l carrier 1: 2 x 10
l carrier 1: 5
l carrier 2: 2 x 30
l carrier 2: 15
l carrier 1: 2 x 8
l carrier 1: 5
l carrier 2: 2 x 32
l carrier 2: 20
l carrier 1: 2 x 16
l carrier 1: 10
l carrier 2: 2 x 24
l carrier 2: 15
l carrier 1: 2 x 17
l carrier 1: 15
l carrier 2: 2 x 23
l carrier 2: 20
2 (MIMO)
2 (MIMO)
2 (MIMO)
2 (MIMO)
Engineering Specifications
The following table lists the equipment specifications of an RRU3260.
Table 5-397 Equipment specifications of an RRU3260
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3260
-48 V DC; voltage
range: -57 V DC to
-36 V DC
400 mm x 300 mm x 100 mm
(12 L, without the housing)
≤ 14 (without the
housing)
NOTE
The RRU3260
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
The following table lists the environmental specifications of an RRU3260.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
370
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-398 Environmental specifications of an RRU3260
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
60
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
NOTE
According to the
installation
scenario, traffic
load, and carrier
configuration, the
output power of
some RRUs may
temporarily
decrease when they
work in the highest
10°C temperature
range.
The following table lists the compliance standards for an RRU3260.
Table 5-399 Compliance standards for an RRU3260
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3260
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-400 lists the surge protection specifications of ports on an RRU3260.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
371
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-400 Surge protection specifications of ports on an RRU3260
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3260.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
372
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-401 Specifications of CPRI ports on an RRU3260
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3260
2
1.25, 2.5, or
4.9
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
373
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
l When the
rate at the
CPRI
port is 4.9
Gbit/s:
– Four
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 10
MHz.
– Two
levels
are
suppo
rted if
the
cell
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
374
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
band
width
is
greate
r than
or
equal
to 15
MHz.
Antenna Capability
The following table lists the antenna capability of an RRU3260.
Table 5-402 Antenna capability of an RRU3260
Type
TMA Support
Supported RET Antennas
RRU3260
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.24 RRU3262 Technical Specifications
An RRU3262, which is a remote radio unit for LTE FDD, supports three carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3262.
Table 5-403 Modes and frequency bands supported by an RRU3262
Issue 05 (2014-08-30)
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3262
LTE FDD
2600 (band 7)
2500 to 2570
2620 to 2690
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
375
3900 Series Base Station
Technical Description
5 Product Specifications
RF Specifications
Table 5-404 lists radio frequency (RF) specifications of an RRU3262.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
376
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-404 RF specifications of an RRU3262
Type
RRU3
262
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T4R
Three carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz.
Receiver Sensitivity
(dBm)
1-Way
receiver
sensitivit
y
2-Way
receiver
sensitivit
y
-106.5
-109.3
Output
Power
Power
Consum
ption
The
RRU3262
supports
the
maximum
power
configurat
ion 2 x 60
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3262
(LTE
FDD,
2600
MHz)
table.
See the
RRU3262
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3262
in 3900
Series
Base
Station
Initial
Configura
tion
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
377
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-405 Output power for the RRU3262 (LTE FDD, 2600 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE(FDD)
1(MIMO)
2 x 40
5
1(MIMO)
2 x 60
10, 15, 20
2(MIMO)
l carrier 1: 2 x 30
5, 10, 15, 20
l carrier 2: 2 x 30
2(MIMO)
2(MIMO)
2(MIMO)
2(MIMO)
2(MIMO)
3(MIMO)
l carrier 1: 2 x 20
l carrier 1: 5, 10
l carrier 2: 2 x 40
l carrier 2: 10, 20
l carrier 1: 2 x 15
l carrier 1: 5
l carrier 2: 2 x 45
l carrier 2: 15
l carrier 1: 2 x 12
l carrier 1: 5
l carrier 2: 2 x 48
l carrier 2: 20
l carrier 1: 2 x 24
l carrier 1: 10
l carrier 2: 2 x 36
l carrier 2: 15
l carrier 1: 2 x 26
l carrier 1: 15
l carrier 2: 2 x 34
l carrier 2: 20
l carrier 1: 2 x 20
5, 10, 15, 20
l carrier 2: 2 x 20
l carrier 3: 2 x 20
3(MIMO)
3(MIMO)
3(MIMO)
Issue 05 (2014-08-30)
l carrier 1: 2 x 15
l carrier 1: 5, 10
l carrier 2: 2 x 15
l carrier 2: 5, 10
l carrier 3: 2 x 30
l carrier 3: 10, 20
l carrier 1: 2 x 12
l carrier 1: 5
l carrier 2: 2 x 12
l carrier 2: 5
l carrier 3: 2 x 36
l carrier 3: 15
l carrier 1: 2 x 10
l carrier 1: 5
l carrier 2: 2 x 10
l carrier 2: 5
l carrier 3: 2 x 40
l carrier 3: 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
378
3900 Series Base Station
Technical Description
5 Product Specifications
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
3(MIMO)
l carrier 1: 2 x 12
l carrier 1: 5
l carrier 2: 2 x 24
l carrier 2: 10
l carrier 3: 2 x 24
l carrier 3: 10
l carrier 1: 2 x 10
l carrier 1: 5
l carrier 2: 2 x 20
l carrier 2: 10
l carrier 3: 2 x 30
l carrier 3: 15
l carrier 1: 2 x 9
l carrier 1: 5
l carrier 2: 2 x 17
l carrier 2: 10
l carrier 3: 2 x 34
l carrier 3: 20
l carrier 1: 2 x 9
l carrier 1: 5
l carrier 2: 2 x 26
l carrier 2: 15
l carrier 3: 2 x 26
l carrier 3: 15
l carrier 1: 2 x 8
l carrier 1: 5
l carrier 2: 2 x 23
l carrier 2: 15
l carrier 3: 2 x 30
l carrier 3: 20
l carrier 1: 2 x 7
l carrier 1: 5
l carrier 2: 2 x 27
l carrier 2: 20
l carrier 3: 2 x 27
l carrier 3: 20
l carrier 1: 2 x 17
l carrier 1: 10
l carrier 2: 2 x 17
l carrier 2: 10
l carrier 3: 2 x 26
l carrier 3: 15
l carrier 1: 2 x 15
l carrier 1: 10
l carrier 2: 2 x 23
l carrier 2: 15
l carrier 3: 2 x 23
l carrier 3: 15
l carrier 1: 2 x 13
l carrier 1: 10
l carrier 2: 2 x 20
l carrier 2: 15
l carrier 3: 2 x 27
l carrier 3: 20
l carrier 1: 2 x 12
l carrier 1: 10
l carrier 2: 2 x 24
l carrier 2: 20
l carrier 3: 2 x 24
l carrier 3: 20
l carrier 1: 2 x 18
l carrier 1: 15
l carrier 2: 2 x 18
l carrier 2: 15
l carrier 3: 2 x 24
l carrier 3: 20
3(MIMO)
3(MIMO)
3(MIMO)
3(MIMO)
3(MIMO)
3(MIMO)
3(MIMO)
3(MIMO)
3(MIMO)
3(MIMO)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
379
3900 Series Base Station
Technical Description
5 Product Specifications
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
3(MIMO)
l carrier 1: 2 x 16
l carrier 1: 15
l carrier 2: 2 x 22
l carrier 2: 20
l carrier 3: 2 x 22
l carrier 3: 20
Engineering Specifications
The following table lists the equipment specifications of an RRU3262.
Table 5-406 Equipment specifications of an RRU3262
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3262
-48 V DC; voltage
range: -57 V DC to
-36 V DC
400 mm x 300 mm x 100 mm
(12 L, without the housing)
≤ 14 (without the
housing)
NOTE
The RRU3262
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
The following table lists the environmental specifications of an RRU3262.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
380
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-407 Environmental specifications of an RRU3262
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
62
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
NOTE
According to the
installation
scenario, traffic
load, and carrier
configuration, the
output power of
RRU3262 may
temporarily
decrease when they
work in the highest
10°C temperature
range.
The following table lists the compliance standards for an RRU3262.
Table 5-408 Compliance standards for an RRU3262
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3262
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-409 lists the surge protection specifications of ports on an RRU3262.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
381
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-409 Surge protection specifications of ports on an RRU3262
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3262.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
382
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-410 Specifications of CPRI ports on an RRU3262
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3262
2
1.25, 2.5,
4.9, or 9.8
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
383
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
l When the
rate at the
CPRI
port is 4.9
Gbit/s:
– Four
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 10
MHz.
– Two
levels
are
suppo
rted if
the
cell
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
384
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
band
width
is
greate
r than
or
equal
to 15
MHz.
l When the
rate at the
CPRI
port is 9.8
Gbit/s:
Four
levels are
supporte
d.
Antenna Capability
The following table lists the antenna capability of an RRU3262.
Table 5-411 Antenna capability of an RRU3262
Type
TMA Support
Supported RET Antennas
RRU3262
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.25 RRU3268 Technical Specifications
An RRU3268, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3268.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
385
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-412 Modes and frequency bands supported by an RRU3268
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3268
LTE FDD
2600 (band 7)
2500 to 2570
2620 to 2690
700 (band 28)
Band A: 703 to 743
Band A: 758 to 798
Band B: 718 to 748
Band B: 773 to 803
832 to 862
791 to 821
800
RF Specifications
Table 5-413 lists radio frequency (RF) specifications of an RRU3268.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
386
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-413 RF specifications of an RRU3268
Type
RRU3
268
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz.
l In band 7 of the
2600 MHz
frequency
band, the total
bandwidth
between the
maximum
frequency and
the minimum
frequency of
two carriers on
the RRU3268
cannot exceed
50 MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
l 2600
MHz:
-106.5
l 2600
MHz:
-109.3
l 700
MHz:
-106.0
l 700
MHz:
-108.8
l 800M
Hz:
-106.4
l 800M
Hz:
-109.2
l In band 28 of
the 700 MHz
frequency
band, the total
bandwidth
between the
maximum
frequency and
the minimum
frequency of
two carriers on
the RRU3268
cannot exceed
25 MHz.
l In the 800 MHz
frequency
band, the total
bandwidth
between the
maximum
frequency and
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consum
ption
The
RRU3268
supports
the
maximum
power
configurat
ion 2 x 40
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3268
(LTE
FDD, 700
MHz/800
MHz/
2600
MHz)
table.
See the
RRU3268
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3268
in 3900
Series
Base
Station
Initial
387
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Trans
mit
and
Recei
ve
Chan
nels
Capacity
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Output
Power
Receiver
Sensitivi
ty with
Two
Antenna
s
the minimum
frequency of
two carriers on
the RRU3268
cannot exceed
30 MHz.
Power
Consum
ption
Configurat
ion Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-414 Output power for the RRU3268 (LTE FDD, 700 MHz/800 MHz/2600 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2x40
5,10,15,20
2 (MIMO)
2x20
5,10,15,20
2 (MIMO)
l carrier 1: 2 x 13
l carrier 1: 5,10
l carrier 2: 2 x 27
l carrier 2: 10,20
l carrier 1: 2 x 10
l carrier 1: 5
l carrier 2: 2 x 30
l carrier 2: 15
l carrier 1: 2 x 8
l carrier 1: 5
l carrier 2: 2 x 32
l carrier 2: 20
l carrier 1: 2 x 16
l carrier 1: 10
l carrier 2: 2 x 24
l carrier 2: 15
l carrier 1: 2 x 17
l carrier 1: 15
l carrier 2: 2 x 23
l carrier 2: 20
2 (MIMO)
2 (MIMO)
2 (MIMO)
2 (MIMO)
Engineering Specifications
The following table lists the equipment specifications of an RRU3268.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
388
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-415 Equipment specifications of an RRU3268
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3268
-48 V DC; voltage
range: -57 V DC to
-36 V DC
400 mm x 300 mm x 100 mm
(12 L, without the housing)
≤ 14 (without the
housing)
NOTE
The RRU3268
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
The following table lists the environmental specifications of an RRU3268.
Table 5-416 Environmental specifications of an RRU3268
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
68
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
NOTE
According to the
installation
scenario, traffic
load, and carrier
configuration, the
output power of
some RRUs may
temporarily
decrease when they
work in the highest
10°C temperature
range.
The following table lists the compliance standards for an RRU3268.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
389
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-417 Compliance standards for an RRU3268
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3268
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-418 lists the surge protection specifications of ports on an RRU3268.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-418 Surge protection specifications of ports on an RRU3268
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Surge
current
RF port
RET port
Alarm port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
390
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Common
mode
Specification
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3268.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
391
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-419 Specifications of CPRI ports on an RRU3268
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3268
2
1.25, 2.5, or
4.9
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Three
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Two
levels
are
suppo
rted if
the
cell
band
width
is 10
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
392
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
l When the
rate at the
CPRI
port is 4.9
Gbit/s:
– Four
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 10
MHz.
– Two
levels
are
suppo
rted if
the
cell
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
393
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
band
width
is
greate
r than
or
equal
to 15
MHz.
Antenna Capability
The following table lists the antenna capability of an RRU3268.
Table 5-420 Antenna capability of an RRU3268
Type
TMA Support
Supported RET Antennas
RRU3268
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.26 RRU3628 Technical Specifications
An RRU3628, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3628.
Table 5-421 Modes and frequency bands supported by an RRU3628
Issue 05 (2014-08-30)
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3628
LTE FDD
2100
1920 to 1980
2110 to 2170
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
394
3900 Series Base Station
Technical Description
5 Product Specifications
RF Specifications
Table 5-422 lists radio frequency (RF) specifications of an RRU3628.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
395
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-422 RF specifications of an RRU3628
Type
RRU3
628
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz; the
total bandwidth
between the
maximum
frequency and the
minimum
frequency of the
spectrums for two
carriers does not
exceed 60 MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.5
-109.3
Output
Power
Power
Consum
ption
The
RRU3628
supports
the
maximum
power
configurat
ion 2 x 40
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3628
(LTE
FDD,
2100
MHz)
table.
See the
RRU3628
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3628
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
396
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-423 Output power for the RRU3628 (LTE FDD, 2100 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 20
5,10,15,20
1 (MIMO)
2 x 40
5,10,15,20
2 (MIMO)
2 x 20
5,10,15,20
Engineering Specifications
The following table lists the equipment specifications of an RRU3628.
Table 5-424 Equipment specifications of an RRU3628
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3628
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 400 mm x 220 mm x 140
mm (without the housing
and connectors)
≤ 15
NOTE
The RRU3628
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
l 400 mm x 240 mm x 160
mm (with the housing and
connectors)
The following table lists the environmental specifications of an RRU3628.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
397
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-425 Environmental specifications of an RRU3628
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU36
28
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
The following table lists the compliance standards for an RRU3628.
Table 5-426 Compliance standards for an RRU3628
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3628
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-427 lists the surge protection specifications of ports on an RRU3628.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-427 Surge protection specifications of ports on an RRU3628
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
2 kV (1.2/50 μs)
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
398
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specification
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3628.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
399
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-428 Specifications of CPRI ports on an RRU3628
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3628
2
1.25, 2.5, or
4.9
Star, chain,
or ring
4
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
Antenna Capability
The following table lists the antenna capability of an RRU3628.
Table 5-429 Antenna capability of an RRU3628
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3628
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
400
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.27 RRU3632 Technical Specifications
An RRU3632, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3632.
Table 5-430 Modes and frequency bands supported by an RRU3632
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3632
LTE FDD
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-431 lists radio frequency (RF) specifications of an RRU3632.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
401
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-431 RF specifications of an RRU3632
Typ
e
Tran
smit
and
Rece
ive
Cha
nnel
s
Capacity
Receiver Sensitivity (dBm)
RRU
3632
2T4R
Two carriers.
-106.5
The bandwidth
per carrier is 5,
10, 15, or 20
MHz; the total
bandwidth
between the
maximum
frequency and
the minimum
frequency of the
spectrums for
two carriers
does not exceed
60 MHz.
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
-109.3
-112.0
Output
Power
Power
Consu
mption
The
RRU363
2
supports
the
maximu
m power
configur
ation 2 x
60 W.
For
typical
configur
ations,
see the
Output
power
for the
RRU363
2 (LTE
FDD,
2100
MHz)
table.
See the
RRU363
2 sheet in
3900
Series
Base
Station
Power
Consum
ption
Specific
ations.
For
typical
PA
configur
ations,
see
Typical
Power
Configur
ation for
RRU363
2 in 3900
Series
Base
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
402
3900 Series Base Station
Technical Description
Typ
e
5 Product Specifications
Tran
smit
and
Rece
ive
Cha
nnel
s
Capacity
Receiver Sensitivity (dBm)
Receive
r
Sensiti
vity
with
One
Antenn
a
Receive
r
Sensiti
vity
with
Two
Antenn
as
Receive
r
Sensiti
vity
with
Four
Antenn
as
Output
Power
Power
Consu
mption
Station
Initial
Configur
ation
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-432 Output power for the RRU3632 (LTE FDD, 2100 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 20
5,10,15,20
1 (MIMO)
2 x 40
10,15,20
1 (MIMO)
2 x 60
15,20
2 (MIMO)
2 x 30
5,10,15,20
Engineering Specifications
The following table lists the equipment specifications of an RRU3632.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
403
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-433 Equipment specifications of an RRU3632
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3632
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 400 mm x 300 mm x 100
mm (12 L, without the
housing)
≤ 15
NOTE
The RRU3632
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
l 400 mm x 300 mm x 120
mm (14.4 L, with the
housing)
The following table lists the environmental specifications of an RRU3632.
Table 5-434 Environmental specifications of an RRU3632
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU36
32
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
NOTE
According to the
installation
scenario, traffic
load, and carrier
configuration, the
output power of
some RRUs may
temporarily
decrease when they
work in the highest
10°C temperature
range.
The following table lists the compliance standards for an RRU3632.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
404
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-435 Compliance standards for an RRU3632
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3632
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-436 lists the surge protection specifications of ports on an RRU3632.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-436 Surge protection specifications of ports on an RRU3632
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Surge
current
RF port
RET port
Alarm port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
405
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Common
mode
Specification
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3632.
Table 5-437 Specifications of CPRI ports on an RRU3632
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3632
2
1.25, 2.5, or
4.9
Star, chain,
or ring
4
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
406
3900 Series Base Station
Technical Description
5 Product Specifications
Antenna Capability
The following table lists the antenna capability of an RRU3632.
Table 5-438 Antenna capability of an RRU3632
Type
TMA Support
Supported RET Antennas
RRU3632
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.28 RRU3638 Technical Specifications
An RRU3638, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3638.
Table 5-439 Modes and frequency bands supported by an RRU3638
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3638
LTE FDD
2100
1920 to 1980
2110 to 2170
RF Specifications
Table 5-440 lists radio frequency (RF) specifications of an RRU3638.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
407
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-440 RF specifications of an RRU3638
Type
RRU3
638
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T2R
Two carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz; the
total bandwidth
between the
maximum
frequency and the
minimum
frequency of the
spectrums for two
carriers does not
exceed 60 MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.5
-109.3
Output
Power
Power
Consum
ption
The
RRU3638
supports
the
maximum
power
configurat
ion 2 x 40
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3638
(LTE
FDD,
2100
MHz)
table.
See the
RRU3638
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3638
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
408
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-441 Output power for the RRU3638 (LTE FDD, 2100 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 20
5,10,15,20
1 (MIMO)
2 x 40
10,15,20
2 (MIMO)
2 x 20
5,10,15,20
Engineering Specifications
The following table lists the equipment specifications of an RRU3638.
Table 5-442 Equipment specifications of an RRU3638
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3638
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 400 mm x 300 mm x 100
mm (12 L, without the
housing)
≤ 15
NOTE
The RRU3638
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
l 400 mm x 300 mm x 120
mm (14.4 L, with the
housing)
The following table lists the environmental specifications of an RRU3638.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
409
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-443 Environmental specifications of an RRU3638
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU36
38
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
NOTE
According to the
installation
scenario, traffic
load, and carrier
configuration, the
output power of
some RRUs may
temporarily
decrease when they
work in the highest
10°C temperature
range.
The following table lists the compliance standards for an RRU3638.
Table 5-444 Compliance standards for an RRU3638
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3638
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-445 lists the surge protection specifications of ports on an RRU3638.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
410
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-445 Surge protection specifications of ports on an RRU3638
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3638.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
411
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-446 Specifications of CPRI ports on an RRU3638
Type
Number of
CPRI Ports
RRU3638
2
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
Star, chain,
or ring
4
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
Antenna Capability
The following table lists the antenna capability of an RRU3638.
Table 5-447 Antenna capability of an RRU3638
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3638
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
412
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.29 RRU3642 Technical Specifications
An RRU3642, which is a remote radio unit for LTE FDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3642.
Table 5-448 Modes and frequency bands supported by an RRU3642
Type
Mode
Frequency Band
(MHz)
Receive
Frequency Band
(MHz)
Transmit
Frequency Band
(MHz)
RRU3642
LTE FDD
850 (band 5)
824 to 843
869 to 888
RF Specifications
Table 5-449 lists radio frequency (RF) specifications of an RRU3642.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
413
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-449 RF specifications of an RRU3642
Type
RRU3
642
Trans
mit
and
Recei
ve
Chan
nels
Capacity
2T4R
Two carriers. The
bandwidth per
carrier is 3, 5, or 10
MHz; the total
bandwidth
between the
maximum
frequency and the
minimum
frequency of the
spectrums for two
carriers does not
exceed 19 MHz.
Receiver Sensitivity
(dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.3
-109.1
Output
Power
Power
Consum
ption
The
RRU3642
supports
the
maximum
power
configurat
ion 2 x 40
W. For
typical
configurat
ions, see
the
Output
power for
the
RRU3642
(LTE
FDD, 850
MHz)
table.
See the
RRU3642
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3642
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
414
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-450 Output power for the RRU3642 (LTE FDD, 850 MHz)
Working mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2x7
3
1 (MIMO)
2 x 10
5
1 (MIMO)
2 x 15
3
1 (MIMO)
2 x 20
5,10
1 (MIMO)
2 x 40
10
2 (MIMO)
l carrier1: 2 x 7
l carrier1: 3
l carrier2: 2 x 10
l carrier2: 5
l carrier1: 2 x 15
l carrier1: 3
l carrier2: 2 x 25
l carrier2: 5
l carrier1: 2 x 13
l carrier1: 5
l carrier2: 2 x 26
l carrier2: 10
l carrier1: 2 x 15
3
2 (MIMO)
2 (MIMO)
2 (MIMO)
l carrier2: 2 x 15
2 (MIMO)
2 (MIMO)
l carrier1: 2 x 20
l carrier1: 10
l carrier2: 2 x 10
l carrier2: 5
l carrier1: 2 x 20
5,10
l carrier2: 2 x 20
Engineering Specifications
The following table lists the equipment specifications of an RRU3642.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
415
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-451 Equipment specifications of an RRU3642
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3642
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 485 mm x 380 mm x 170
mm (with the housing)
l ≤ 25 (with the
housing)
l 480 mm x 356 mm x 140
mm (without the housing)
l ≤ 23.5 (without
the housing)
NOTE
The RRU3642
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
The following table lists the environmental specifications of an RRU3642.
Table 5-452 Environmental specifications of an RRU3642
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU36
42
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
The following table lists the compliance standards for an RRU3642.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
416
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-453 Compliance standards for an RRU3642
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3642
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-454 lists the surge protection specifications of ports on an RRU3642.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-454 Surge protection specifications of ports on an RRU3642
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
250 A
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
417
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
Alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3642.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
418
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-455 Specifications of CPRI ports on an RRU3642
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3642
2
1.25, 2.5, or
4.9
Star
Cascading is l When the
not
LBBPc,
recommende
LBBPd1,
d due to the
or
limited
UBBPd3
transmission
is
bandwidth of
configure
CPRI ports.
d: 20
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
Antenna Capability
The following table lists the antenna capability of an RRU3642.
Table 5-456 Antenna capability of an RRU3642
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3642
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
419
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.30 RRU3841 Technical Specifications
An RRU3841, which is a remote radio unit for LTE FDD, supports a maximum of two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3841.
Table 5-457 Modes and frequency bands supported by an RRU3841
Type
Mode
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
RRU384
1
LTE FDD
AWS (band 4)
1710 to 1755
2110 to 2155
RF Specifications
Table 5-458 lists radio frequency (RF) specifications of an RRU3841.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
420
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-458 RF specifications of an RRU3841
Type
RRU3
841
Trans
mit
and
Recei
ve
Chan
nels
Capacity
Receiver Sensitivity
(dBm)
4T4R
Two carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz; the
total bandwidth
between the
maximum
frequency and the
minimum
frequency of the
spectrums for two
carriers does not
exceed 40 MHz.
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitivi
ty with
Two
Antenna
s
-106.3
-109.1
Output
Power
Power
Consum
ption
Output
power for
the
RRU3841
(LTE
FDD,
AWS)
See the
RRU3841
sheet in
3900
Series
Base
Station
Power
Consumpt
ion
Specificati
ons.
For typical
PA
configurat
ions, see
Typical
Power
Configurat
ion for
RRU3841
in 3900
Series
Base
Station
Initial
Configurat
ion Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-459 Output power for the RRU3841 (LTE FDD, AWS)
Issue 05 (2014-08-30)
TX and RX Mode
TX RF Port Combination
Mode
Maximum Output Power
(W)
1T2R
Port A or port B
1 x 60
2T2R
Port A is used with port B
2 x 60. For typical
configurations, see the Table
5-460.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
421
3900 Series Base Station
Technical Description
5 Product Specifications
TX and RX Mode
TX RF Port Combination
Mode
Maximum Output Power
(W)
l Port A is used with port C
2 x 30
l port B is used with port D
2T2R + 2T2R (two sectors)
Port A is used with port C and
port B is used with port D
2 x 30 + 2 x 30
2T4R
Port A is used with port B
2 x 60
4T4R
Ports A, B, C, and D are used
together
4 x 30. For typical
configurations, see the Table
5-461.
Table 5-460 Output power for the RRU3841 (LTE FDD, AWS, 4x30 W)
Working
mode
Total Number of LTE
FDD Carriers
Output Power per
LTE FDD Carrier (W)
Bandwidth of LTE
FDD Carrier (MHz)
LTE FDD
1 (MIMO)
4 x 30
1.4, 3, 5, 10, 15, 20
2 (MIMO)
4 x 15
5, 10, 15, 20
2 (MIMO)
l carrier 1: 4 x 10
l carrier 1: 5, 10
l carrier 1: 4 x 20
l carrier 2: 10, 20
Table 5-461 Output power for the RRU3841 (LTE FDD, AWS, 2x60 W)
Working
mode
Total Number of LTE
FDD Carriers
Output Power per
LTE FDD Carrier (W)
Bandwidth of LTE
FDD Carrier (MHz)
LTE FDD
1 (MIMO)
2 x 60
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 30
5, 10, 15, 20
2 (MIMO)
l carrier 1: 2 x 20
l carrier 1: 5, 10
l carrier 2: 2 x 40
l carrier 2: 10, 20
Engineering Specifications
The following table lists the equipment specifications of an RRU3841.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
422
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-462 Equipment specifications of an RRU3841
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3841
-48 V DC; voltage
range: -57 V DC to
-36 V DC
l 480 mm x 356 mm x 140
mm (24 L, without the
housing)
l ≤ 24.5 (without
the housing)
NOTE
The RRU3841
supports AC power
supply when
connected to an
external AC/DC power
module or an
OPM15M. For details,
see AC/DC Power
Module User Guide
and OPM15M User
Guide.
l 485 mm x 380 mm x 170
mm (31 L, with the
housing)
l ≤ 26 (with the
housing)
The following table lists the environmental specifications of an RRU3841.
Table 5-463 Environmental specifications of an RRU3841
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosphe
ric
Pressure
Storage
Time
RRU38
41
4T4R
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommend
ed that the
device be
installed
and used
within one
year after its
delivery
because of
the failure
rate.
l With solar
radiation of
1120 W/m2:
-40°C to +45°
C
l Without solar
radiation: -40°
C to +50°C
Other
configurations
l With solar
radiation of
1120 W/m2:
-40°C to +50°
C
l Without solar
radiation: -40°
C to +55°C
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
423
3900 Series Base Station
Technical Description
5 Product Specifications
The following table lists the compliance standards for an RRU3841.
Table 5-464 Compliance standards for an RRU3841
Type
Operating Environment
Anti-seismic
Performance
Protection Rating
RRU3841
l 3GPP TS 36.141
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04) Class
4.1: "Nonweatherprotected
locations"
Table 5-465 lists the surge protection specifications of ports on an RRU3841.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-465 Surge protection specifications of ports on an RRU3841
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Surge
current
RF port
RET port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
424
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
Alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3841.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
425
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-466 Specifications of CPRI ports on an RRU3841
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3841
2
1.25, 2.5, or
4.9
Star, chain,
or ring
l When the
rate at the
CPRI
port is
1.25
Gbit/s:
Cascadin
g is not
supporte
d.
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
rate at the
CPRI
port is 2.5
Gbit/s:
– Two
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 5
MHz.
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
426
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
or
equal
to 10
MHz.
l When the
rate at the
CPRI
port is 4.9
Gbit/s:
– Two
levels
are
suppo
rted if
the
cell
band
width
is less
than
or
equal
to 10
MHz.
– Casca
ding
is not
recom
mend
ed if
the
cell
band
width
is
greate
r than
or
equal
to 15
MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
427
3900 Series Base Station
Technical Description
5 Product Specifications
Antenna Capability
The following table lists the antenna capability of an RRU3841.
Table 5-467 Antenna capability of an RRU3841
Type
TMA Support
Supported RET Antennas
RRU3841
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.31 RRU3908 Technical Specifications
RRU3908 modules are remote radio units and are classified into RRU3908 V1 and RRU3908
V2 modules. With the software-defined radio (SDR) technique, RRU3908 modules can work
in different modes with different configurations.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3908.
Table 5-468 Modes and frequency bands supported by an RRU3908
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3908
V1 (DC/
AC)
850
824 to 849
869 to 894
GSM and UMTS
900 PGSM
890 to 915
935 to 960
900 EGSM
880 to 905
925 to 950
GSM, UMTS,
and GU
1800
1710 to 1755
1805 to 1850
1740 to 1785
1835 to 1880
1850 to 1890
1930 to 1970
1870 to 1910
1950 to 1990
850
824 to 849
869 to 894
GSM, UMTS,
and GU
900 PGSM
890 to 915
935 to 960
900 EGSM
880 to 915
925 to 960
GSM, UMTS,
LTE FDD, GU,
and GL
1900
RRU3908
V2 (DC)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GSM, LTE FDD,
and GL
GSM and UMTS
428
3900 Series Base Station
Technical Description
5 Product Specifications
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3908
V2 (AC)
900 PGSM
890 to 915
935 to 960
GSM, UMTS,
LTE FDD, GU,
and GL
RF Specifications
Table 5-469 lists radio frequency (RF) specifications of an RRU3908.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity is measured, as recommended in 3GPP TS 51.021, over the central band at
the antenna connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does
not exceed 2%. The central band is the 80% of the full band.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3908 that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies
with the EN 301 502 V9.2.1 standard. The RRU3908 that works in GSM mode and operates in the 850 or
1900 MHz frequency band complies with the 3GPP TS 45.005 V10.2.0 and 3GPP TS 51.021 V10.2.0
standards.
l The RRU3908 that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the
900 or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104
standards. The RRU3908 that works in UMTS, LTE FDD, or MSR mode and operates in the 850 or 1900
MHz frequency band complies with the 3GPP TS 37.104 V10.4.0 and TS 37.141 V10.4.0 standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
429
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-469 RF specifications of an RRU3908
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
RR
U3
908
V1
2T
2R
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Anten
na
Receiv
er
Sensiti
vity
with
Two
Anten
nas
Receiver
Sensitivi
ty with
Four
Antenna
s
GSM: 6
TRXs
GSM:
-113.0
GSM:
-115.8
UMTS: 4
carriers
UMTS:
-125.5
UMTS:
-128.3
GSM:
-118.5
(theoretic
al value)
LTE
FDD: 1
carrier
with a
bandwidt
h of 5, 10,
15, or 20
MHz
LTE
FDD:
-106.3
LTE
FDD:
-109.1
UMTS:
-131.0
LTE
FDD:
-111.8
Output Power
Power
Consumpti
on
The RRU3908
V1 supports the
maximum
power
configuration 2
x 40 W. The
typical
configurations
are as follows:
See the
RRU3908
sheet in 3900
Series Base
Station Power
Consumption
Specification
s.
l Output
power for
the
RRU3908
V1 (GSM,
850 MHz/
900 MHz/
1800 MHz/
1900 MHz)
l Output
power for
the
RRU3908
V1 (UMTS,
850 MHz/
900 MHz/
1900 MHz)
l Output
power for
the
RRU3908
V1 (LTE
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
430
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Anten
na
Receiv
er
Sensiti
vity
with
Two
Anten
nas
Output Power
Receiver
Sensitivi
ty with
Four
Antenna
s
Power
Consumpti
on
FDD, 1800
MHz)
l Output
power for
the
RRU3908
V1 (GU
non-MSR,
900 MHz)
l Output
power for
the
RRU3908
V1 (GU
MSR, 900
MHz)
l Output
power for
the
RRU3908
V1 (GL
MSR, 1800
MHz)
For typical PA
configurations,
see Typical
Power
Configuration
for RRU3908
V1 in 3900
Series Base
Station Initial
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
431
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Anten
na
Receiv
er
Sensiti
vity
with
Two
Anten
nas
Output Power
Receiver
Sensitivi
ty with
Four
Antenna
s
Power
Consumpti
on
Configuration
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
432
3900 Series Base Station
Technical Description
5 Product Specifications
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
RR
U3
908
V2
2T
2R
GSM: 8
TRXs
UMTS:
l 850
MHz:
2
carrie
rs
l 900
MHz:
4
carrie
rs
LTE
FDD: 1
carriers
with a
bandwidt
h of 1.4,
3, 5, 10,
15, or 20
MHz
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Anten
na
Receiv
er
Sensiti
vity
with
Two
Anten
nas
Receiver
Sensitivi
ty with
Four
Antenna
s
GSM:
GSM:
GSM:
l 850/
900
MH
z
PGS
M:
-113
.5
l 850/90
0 MHz
PGSM
:
-119.0
(theor
etical
value)
l 900
MH
z
EGS
M:
-113
.3
l 900
MHz
EGSM
:
-118.8
(theor
etical
value)
UMTS:
l 850/
900
MH
z
PGS
M:
-125
.5
l 900
MH
z
EGS
M:
-125
.3
Issue 05 (2014-08-30)
UMTS:
l 850/90
0 MHz
PGSM
:
-131.0
l 900
MHz
EGSM
:
-130.8
LTE
FDD:
l 900
MHz
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output Power
Power
Consumpti
on
The RRU3908
V2 supports the
maximum
power
configuration 2
x 40 W. The
typical
configurations
are as follows:
l Output
power for
the
RRU3908
V2 (GSM,
850 MHz/
900 MHz)
l Output
power for
the
RRU3908
V2 (UMTS,
850 MHz/
900 MHz)
l Output
power for
the
RRU3908
V2 (LTE
FDD, 900
MHz)
l Output
power for
433
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Anten
na
Receiv
er
Sensiti
vity
with
Two
Anten
nas
Receiver
Sensitivi
ty with
Four
Antenna
s
LTE
FDD:
l 850/
900
MHz
PGS
M:
-116.
3
PGSM
:
-111.8
l 900
MH
z
PGS
M:
-106
.3
l 900
MH
z
EGS
M:
-106
.1
l 900
MHz
EGSM
l 900
MHz
EGS
M:
-116.
1
UMTS:
l 850/
900
MHz
PGS
M:
-128.
3
l 900
MHz
EGS
M:
-128.
1
LTE
FDD:
l 900
MHz
PGS
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output Power
Power
Consumpti
on
the
RRU3908
V2 (GU
non-MSR,
850 MHz/
900 MHz)
l Output
power for
the
RRU3908
V2 (GU
MSR, 850
MHz/900
MHz)
l Output
power for
the
RRU3908
V2 (GL
MSR, 900
MHz)
For typical PA
configurations,
see Typical
Power
Configuration
for RRU3908
V2 in 3900
Series Base
Station Initial
Configuration
Guide.
434
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receiv
er
Sensiti
vity
with
One
Anten
na
Receiv
er
Sensiti
vity
with
Two
Anten
nas
Receiver
Sensitivi
ty with
Four
Antenna
s
M:
-109.
1
:
-111.6
Output Power
Power
Consumpti
on
l 900
MHz
EGS
M:
-108.
9
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3908 V2 working in GSM mode and operating in the 900 MHz frequency band: After design
optimization, the 8PSK and GMSK modulation schemes enable the same output power for each carrier on
the RF module when any of the S1 through S6 configurations is used. When the S7 or S8 configuration is
used, the license controlling the GBFD-118104 Enhanced EDGE Coverage feature must be obtained.
Otherwise, the 8PSK and GMSK modulation schemes cannot enable the same output power for each carrier
on the RF module.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
435
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-470 Output power for the RRU3908 V1 (GSM, 850 MHz/900 MHz/1800 MHz/1900
MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
40
40
2
40
40
3
20
20
4
15
20
5
12
12
6
10
12
NOTE
(a) indicates that only hardware is available for the configuration.
Table 5-471 Output power for the RRU3908 V1 (UMTS, 850 MHz/900 MHz/1900 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
40
2
30
3(a)
20(a)
4(a)
15(a)
1 (MIMO)
2 x 30
2 (MIMO)
2 x 15
Table 5-472 Output power for the RRU3908 V1 (LTE FDD, 1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of LTE Output Power per
FDD Carriers
LTE FDD Carrier (W)
Bandwidth of LTE
FDD Carrier (MHz)
LTE FDD
1 (MIMO)
5, 10, 15, 20
2 x 30
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
436
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-473 Output power for the RRU3908 V1 (GU non-MSR, 900 MHz)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM +
UMTS
1
1
40
30
1
1
30
40
1
2
30
20
2
1
20
30
2
1
15
40
2
2
15
20
3
1
10
30
3
2
10
10
4
1
7.5
20
4
2
7.5
10
5
1
6
20
Table 5-474 Output power for the RRU3908 V1 (GU MSR, 900 MHz)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM +
UMTS
1
1
20
20
4
1
12
12
4
2
10
10
5
1
10
10
NOTE
In the following table, the LTE FDD bandwidth is 5 or 10 MHz, and the GSM and LTE FDD combined bandwidth
is lower than 15 MHz.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
437
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-475 Output power for the RRU3908 V1 (GL MSR, 1800 MHz)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE FDD
Carrier
(MHz)
GSM +
LTE FDD
1
1 (MIMO)
20
2 x 10
5, 10
1
1 (MIMO)
10
2 x 20
5, 10
2
1 (MIMO)
20
2 x 10
5, 10
2
1 (MIMO)
10
2 x 20
5, 10
3
1 (MIMO)
10
2 x 10
5, 10
4
1 (MIMO)
10
2 x 10
5, 10
Table 5-476 Output power for the RRU3908 V2 (GSM, 850 MHz/900 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
40
40
2
40
40
3
20
20
4
20
20
5
13
15
6
13
15
7
10
13
8
10
13
NOTE
(a) indicates that the configuration is supported only at the 900 MHz frequency band.
Table 5-477 Output power for the RRU3908 V2 (UMTS, 850 MHz/900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of
UMTS Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
438
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of
UMTS Carriers
Output Power per UMTS
Carrier (W)
2
40
3(a)
20(a)
4(a)
20(a)
1 (MIMO)
2 x 40
2 (MIMO)
2 x 20
3 (MIMO)(a)
2 x 10(a)
4 (MIMO)(a)
2 x 10(a)
Table 5-478 Output power for the RRU3908 V2 (LTE FDD, 900 MHz)
Mode
Total Number of
LTE FDD
Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
Table 5-479 Output power for the RRU3908 V2 (GU non-MSR, 850 MHz/900 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output
Power per
UMTS
Carrier (W)
GSM + UMTS
1
1
40
40
2
1
20
40
3
1
13
40
4
1
10
40
5
1
6
20
1
2
40
20
2
2
20
20
3
2
13
20
4
2
10
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
439
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
(b) indicates that the configuration is supported from SRAN7.0.
Table 5-480 Output power for the RRU3908 V2 (GU MSR, 850 MHz/900 MHz)
Mode
Total
Number of
GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output
Power per
UMTS
Carrier (W)
GSM + UMTS
3
1
20
20
4
1
13
20
5
1
10
30
1
1 (MIMO)
20
2 x 20
2
1 (MIMO)
20
2 x 20
3
1 (MIMO)
15
2 x 10
4
1 (MIMO)
15
2 x 10
4(b)
1 (MIMO)(b)
10(b)
2 x 20(b)
Table 5-481 Output power for the RRU3908 V2 (GL MSR, 900 MHz)
Mode
Total
Number
of GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidt
h of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15
2
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15
3
1 (MIMO)
15
2 x 10
1.4, 3, 5, 10,
15
4
1 (MIMO)
15
2 x 10
1.4, 3, 5, 10
4
1 (MIMO)
12
2 x 15
1.4, 3, 5, 10
Engineering Specifications
The following table lists the equipment specifications of an RRU3908.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
440
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-482 Equipment specifications of an RRU3908
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3908
V1
l -48 V DC; voltage
range: -36 V DC to
-57 V DC
l RRU3908 V1 (DC):
485 mm x 380 mm x
170 mm (with the
housing)
l RRU3908 V1 (DC):
23 (with the housing)
l 200 V AC to 240 V
AC single-phase;
voltage range: 176 V
AC to 290 V AC
l 110 V AC dualphase, voltage range:
90/180 V AC to
135/270 V AC
RRU3908
V2
l -48 V DC; voltage
range: -36 V DC to
-57 V DC
l 200 V AC to 240 V
AC single-phase;
voltage range: 176 V
AC to 290 V AC
l 110 V AC dualphase, voltage range:
90/180 V AC to
135/270 V AC
l RRU3908 V1 (AC):
29 (with the housing)
l RRU3908 V1 (AC):
485 mm x 380 mm x
250 mm (with the
housing)
l RRU3908 V2 (DC):
485 mm x 380 mm x
170 mm (with the
housing)
l RRU3908 V2 (DC):
23 (with the housing)
l RRU3908 V2 (AC):
29 (with the housing)
l RRU3908 V2 (AC):
485 mm x 380 mm x
250 mm (with the
housing)
The following table lists the environmental specifications of an RRU3908.
Table 5-483 Environmental specifications of an RRU3908
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3908
V1
l Without
solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+45°C
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
441
3900 Series Base Station
Technical Description
5 Product Specifications
Type
Operating
Temperatur
e
RRU
3908
V2
l Without
solar
radiation:
-40°C to
+55°C
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
l With solar
radiation:
-40°C to
+50°C
The following table lists the compliance standards for an RRU3908.
Table 5-484 Compliance standards for an RRU3908
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3908
V1
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
RRU3908
V2
l 3GPP TS 36.141
l 3GPP TS 25.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-485 lists the surge protection specifications of ports on an RRU3908.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-485 Surge protection specifications of ports on an RRU3908
Issue 05 (2014-08-30)
Port
Usage
Scenario
Surge Protection Mode
Specification
DC power
supply port
Applicable
to all
scenarios
Surge
2 kV (1.2/50 μs)
Differential
mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
442
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Surge
current
AC power
supply port
Applicable
to the
scenario
where RF
modules are
installed
indoors
Applicable
to the
scenario
where RF
modules are
installed
outdoors
RF port
Surge
current
Surge
Surge
current
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Issue 05 (2014-08-30)
Surge
Specification
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
5 kA
Common
mode
5 kA
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
40 kA
Common
mode
40 kA
Differential
mode
8 kA
Common
mode
40 kA
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
443
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Common
mode
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Specification
5 kA
250 A
Surge
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3908.
Table 5-486 Specifications of CPRI ports on an RRU3908
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3908
V1
2
l 850
MHz/900
MHz/
1900
MHz:
1.25
Star, chain,
or dual-star
CPRI MUX:
l GU
(dualstar/
CPRI
MUX):
40
l 1800
MHz:
1.25 or
2.5
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
l GU: 6
l GL: 4
l In the GL
mode
(dualstar/
CPRI
MUX),
the
444
3900 Series Base Station
Technical Description
5 Product Specifications
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
RRU3908
V2
2
1.25 or 2.5
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
maximu
m
distances
of the
RRUs
from the
BBU
vary with
the types
of BBP in
LTE
mode as
follows
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
UBB
Pd4 is
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
445
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
– Ce
ll
qu
ant
ity
≤
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
Antenna Capability
The following table lists the antenna capability of an RRU3908.
Table 5-487 Antenna capability of an RRU3908
Type
TMA Support
Supported RET Antennas
RRU3908 V1
Supported
AISG2.0 and AISG1.1
RRU3908 V2
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.32 RRU3926 Technical Specifications
RRU3926 modules are remote radio units and can work in different modes with different
configurations and the software-defined radio (SDR) technique.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3926.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
446
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-488 Modes and frequency bands supported by an RRU3926
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3926
900 EGSM
880 to 915
925 to 960
900 PGSM
890 to 915
935 to 960
GSM, UMTS,
and GU
1800
1710 to 1785
1805 to 1880
GSM, UMTS,
LTE FDD, GU,
and GL
RF Specifications
Table 5-489 lists radio frequency (RF) specifications of an RRU3926.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity is measured, as recommended in 3GPP TS 51.021, over the central band at
the antenna connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does
not exceed 2%. The central band is the 80% of the full band.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3926 that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies
with the EN 301 502 V9.2.1 standard .
l The RRU3926 that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the
900 or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104
standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
447
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-489 RF specifications of an RRU3926
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receive
r
Sensitiv
ity with
Four
Antenn
as
RR
U3
926
1T
2R
GSM: 8
TRXs
GSM:
GSM:
GSM:
l 900
MHz:
-113.
7
l 900
MHz:
-116.5
l 900
MHz:
-119.
2
(theor
etical
value)
UMTS: 6
carriers
LTE
FDD: 2
carriers,
the
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz
l 1800
MHz:
-114.
0
UMTS:
l 900
MHz:
-125.
8
l 1800
MHz:
-126.
1
LTE
FDD
l 1800
MHz:
-106.
6
l 1800
MHz:
-116.8
UMTS:
l 1800
MHz:
-128.9
l 1800
MHz:
-119.
5
(theor
etical
value)
LTE FDD
UMTS:
l 1800
MHz:
-109.4
l 900
MHz:
-131.
3
l 900
MHz:
-128.6
l 1800
MHz:
-131.
6
LTE
FDD
l 1800
MHz:
-112.
1
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumptio
n
The
RRU3926
supports the
maximum
power
configuratio
n 1 x 80 W.
The typical
configuratio
ns are as
follows:
See the
RRU3926
sheet in 3900
Series Base
Station Power
Consumption
Specifications
.
l Output
power
for the
RRU392
6 (GSM,
900
MHz/
1800
MHz)
l Output
power
for the
RRU392
6
(UMTS,
900
MHz/
1800
MHz)
448
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receive
r
Sensitiv
ity with
Four
Antenn
as
Output
Power
Power
Consumptio
n
l Output
power
for the
RRU392
6 (LTE
FDD,
1800
MHz)
l Output
power
for the
RRU392
6 (GU
MSR,
900
MHz/
1800
MHz)
l Output
power
for the
RRU392
6 (GL
MSR,
1800
MHz)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
449
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3926 working in GSM mode: when the S1 configuration is applied, the maximum output power
of each carrier on the RRU3926 is 80 W. If the output power of 60 W or 80 W is required, the related license
must be obtained. After design optimization, the 8 phase shift keying (8PSK) and Gaussian minimum shiftfrequency keying (GMSK) modulation schemes enable the same output power for each carrier on the the
RF module when the S1, S2, or S3 configuration is used. When any of the S4 through S8 configurations is
used, the license controlling the GBFD-118104 Enhanced EDGE Coverage feature must be obtained.
Otherwise, the 8PSK and GMSK modulation schemes cannot enable the same output power for each carrier
on the RRU3926.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-490 Output power for the RRU3926 (GSM, 900 MHz/1800 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
80
80
2
40
40
3
27
31
4
20
27
5
16
20
6
12
20
7
10
16
8
7
12
NOTE
(a) indicates that only hardware is available for the configuration.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
450
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-491 Output power for the RRU3926 (UMTS, 900 MHz/1800 MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
80
2
40
3
25
4
20
5(a)
16(a)
6(a)
12(a)
Table 5-492 Output power for the RRU3926 (LTE FDD, 1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1
60
5, 10, 15, 20
1
40
1.4, 3, 5, 10, 15, 20
2
40
1.4, 3, 5, 10
NOTE
(b) indicates that the configuration is supported from SRAN7.0.
Table 5-493 Output power for the RRU3926 (GU MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
1
40
40
1
2
40
20
2
1
30
20
2
1
20
40
2
2
20
20
3
1
20
20
3
2
16
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
451
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
3(b)
2(b)
13(b)
20(b)
4
1
12
20
4
2
12
10
5
1
10
20
5
2
10
10
6
1
10
10
6
2
8
10
7
1
8
10
Table 5-494 Output power for the RRU3926 (GL MSR, 1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1
40
40
1.4, 3, 5, 10,
15, 20
2
1
20
40
1.4, 3, 5, 10,
15, 20
2
1
30
20
1.4, 3, 5, 10,
15, 20
3
1
20
20
1.4, 3, 5, 10,
15, 20
4
1
12
20
1.4, 3, 5, 10,
15, 20
5
1
10
20
1.4, 3, 5,
10,15
6
1
10
10
1.4, 3, 5,
10,15
7
1
8
10
1.4, 3, 5,
10,15
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
452
3900 Series Base Station
Technical Description
5 Product Specifications
Engineering Specifications
The following table lists the equipment specifications of an RRU3926.
Table 5-495 Equipment specifications of an RRU3926
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3926
-48 V DC; voltage range:
-36 V DC to -57 V DC
l 400 mm x 240 mm x
160 mm (with the
housing)
l 15 (with the housing)
NOTE
The RRU3926 supports
AC power supply when
connected to an external
AC/DC power module or
an OPM15M. For details,
see AC/DC Power Module
User Guide and OPM15M
User Guide.
l 13.5 (without the
housing)
l 400 mm x 220 mm x
140 mm (without the
housing)
The following table lists the environmental specifications of an RRU3926.
Table 5-496 Environmental specifications of an RRU3926
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3926
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+50°C
The following table lists the compliance standards for an RRU3926.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
453
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-497 Compliance standards for an RRU3926
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3926
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l 3GPP TS 25.141
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-498 lists the surge protection specifications of ports on an RRU3926.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-498 Surge protection specifications of ports on an RRU3926
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Interconnect
ion port for
receiving RF
signals
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
454
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
RET port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3926.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
455
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-499 Specifications of CPRI ports on an RRU3926
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3926
2
1.25 or 2.5
Star, chain,
ring, or dualstar
l Chain: 21
l GU
(dualstar/
CPRI
MUX):
40
NOTE
When
the
number
of RRU
cascadin
g levels
is
greater
than 6,
the data
rate of
configur
ed
optical
modules
must be
not
lower
than 2.5
Gbit/s.
l CPRI
MUX:
– GU: 6
– GL: 4
l In the GL
mode
(dualstar/
CPRI
MUX),
the
maximu
m
distances
of the
RRUs
from the
BBU
vary with
the types
of BBP in
LTE
mode as
follows
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
UBB
Pd4 is
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
456
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
– Ce
ll
qu
ant
ity
≤
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
Antenna Capability
The following table lists the antenna capability of an RRU3926.
Table 5-500 Antenna capability of an RRU3926
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3926
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
457
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.33 RRU3928 Technical Specifications
RRU3928 modules are remote radio units and can work in different modes with different
configurations and the software-defined radio (SDR) technique.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3928.
Table 5-501 Modes and frequency bands supported by an RRU3928
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3928
900 EGSM
880 to 915
925 to 960
GSM, UMTS,
LTE FDD, GU,
GL, and UL
1800
1710 to 1785
1805 to 1880
GSM, UMTS,
LTE FDD, GU,
and GL
RF Specifications
Table 5-502 lists radio frequency (RF) specifications of an RRU3928.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity is measured, as recommended in 3GPP TS 51.021, over the central band at
the antenna connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does
not exceed 2%. The central band is the 80% of the full band.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3928 that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies
with the EN 301 502 V9.2.1 standard.
l The RRU3928 that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the
900 or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104
standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
458
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-502 RF specifications of an RRU3928
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
RR
U3
928
2T
2R
GSM: 8
TRXs
GSM:
GSM:
GSM:
l 900
MHz:
-113.
7
l 900
MHz:
-116.5
l 900
MHz:
-119.2
(theor
etical
value)
UMTS: 4
carriers
LTE
FDD: 2
carriers,
the
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz
l 1800
MHz:
-114.
0
UMTS:
l 900
MHz:
-125.
8
l 1800
MHz:
-126.
1
LTE
FDD:
l 900
MHz:
-106.
3
l 1800
MHz:
-106.
6
Issue 05 (2014-08-30)
l 1800
MHz:
-116.8
UMTS:
l 900
MHz:
-128.6
l 1800
MHz:
-128.9
LTE
FDD:
l 900
MHz:
-109.1
l 1800
MHz:
-109.4
l 1800
MHz:
-119.5
(theor
etical
value)
UMTS:
l 900
MHz:
-131.3
l 1800
MHz:
-131.6
LTE
FDD:
l 900
MHz:
-111.8
l 1800
MHz:
-112.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpt
ion
The RRU3928
supports the
maximum
power
configuration
2 x 40 W. The
typical
configurations
are as follows:
See the
RRU3928
sheet in
3900 Series
Base Station
Power
Consumptio
n
Specificatio
ns.
l Output
power for
the
RRU3928
(GSM, 900
MHz/1800
MHz)
l Output
power for
the
RRU3928
(UMTS,
900 MHz/
1800
MHz)
l Output
power for
the
RRU3928
(LTE
FDD, 900
459
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
MHz/1800
MHz)
l Output
power for
the
RRU3928
(GU nonMSR, 900
MHz/1800
MHz)
l Output
power for
the
RRU3928
(GU MSR,
900 MHz/
1800
MHz)
l Output
power for
the
RRU3928
(GL MSR,
900 MHz/
1800
MHz)
l Output
power for
the
RRU3928
(UL MSR,
900 MHz)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
460
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
For typical PA
configurations
, see Typical
Power
Configuration
for RRU3928
in 3900 Series
Base Station
Initial
Configuration
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
461
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3928 working in GSM mode: After design optimization, the 8PSK and GMSK modulation
schemes enable the same output power for each carrier on the RF module when any of the S1 through S6
configurations is used. When the S7 or S8 configuration is used, the license controlling the GBFD-118104
Enhanced EDGE Coverage feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes
cannot enable the same output power for each carrier on the RF module.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-503 Output power for the RRU3928 (GSM, 900 MHz/1800 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
40
40
2
40
40
3
20
20
4
20
20
5
13
15
6
13
15
7
10
13
8
10
13
Table 5-504 Output power for the RRU3928 (UMTS, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
462
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
2
40
3
20
4
20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 20
3 (MIMO)
2 x 10
4 (MIMO)
2 x 10
Table 5-505 Output power for the RRU3928 (LTE FDD, 900 MHz/1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 20
1.4, 3, 5, 10, 15, 20
Table 5-506 Output power for the RRU3928 (GU non-MSR, 900 MHz/1800 MHz)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power Output Power
per GSM
per UMTS
Carrier (W)
Carrier (W)
GSM + UMTS
1
1
40
40
2
1
20
40
3
1
13
40
4
1
10
40
1
2
40
20
2
2
20
20
3
2
13
20
4
2
10
20
NOTE
(a) indicates that the configuration is supported from SRAN7.0.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
463
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-507 Output power for the RRU3928 (GU MSR, 900 MHz/1800 MHz)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
3
1
20
20
4
1
13
20
5
1
10
20
6(a)
1(a)
10(a)
20(a)
1
1 (MIMO)
20
2 x 20
2
1 (MIMO)
20
2 x 20
3
1 (MIMO)
10
2 x 20
4
1 (MIMO)
10
2 x 20
1
2 (MIMO)
20
2 x 10
2
2 (MIMO)
20
2 x 10
3
2 (MIMO)
10
2 x 10
4
2 (MIMO)
10
2 x 10
Table 5-508 Output power for the RRU3928 (GL MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
10
2 x 20
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
15
2 x 10
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
10
2 x 20
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
15
2 x 10
1.4, 3, 5, 10,
15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
464
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
5
1 (MIMO)
10
2 x 10
1.4, 3, 5, 10,
15, 20
6
1 (MIMO)
10
2 x 10
1.4, 3, 5, 10,
15, 20
Table 5-509 Output power for the RRU3928 (UL MSR, 900 MHz)
Mode
Total
Number
of UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidt
h of LTE
FDD
Carrier
(MHz)
UMTS + LTE
FDD
1
1 (MIMO)
20
2 x 20
5, 10
2
1 (MIMO)
20
2 x 20
5, 10
3
1 (MIMO)
10
2 x 20
5, 10
4
1 (MIMO)
10
2 x 20
5, 10
Engineering Specifications
The following table lists the equipment specifications of an RRU3928.
Table 5-510 Equipment specifications of an RRU3928
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3928
-48 V DC; voltage range:
-36 V DC to -57 V DC
l 400 mm x 240 mm x
160 mm (with the
housing)
l 15 (with the housing)
NOTE
The RRU3928 supports
AC power supply when
connected to an external
AC/DC power module or
an OPM15M. For details,
see AC/DC Power Module
User Guide and OPM15M
User Guide.
Issue 05 (2014-08-30)
l 13.5 (without the
housing)
l 400 mm x 220 mm x
140 mm (without the
housing)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
465
3900 Series Base Station
Technical Description
5 Product Specifications
The following table lists environmental specifications of an RRU3928.
Table 5-511 Environmental specifications of an RRU3928
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3928
l Without
solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+45°C
The following table lists the compliance standards for an RRU3928.
Table 5-512 Compliance standards for an RRU3928
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3928
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l 3GPP TS 25.141
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-513 lists the surge protection specifications of ports on an RRU3928.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
466
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-513 Surge protection specifications of ports on an RRU3928
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Issue 05 (2014-08-30)
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
467
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3928.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
468
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-514 Specifications of CPRI ports on an RRU3928
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3928
2
1.25, 2.5, or
4.9
Star, chain,
or dual-star
CPRI MUX:
l GU
(dualstar/
CPRI
MUX):
40
l GU: 6
l GL: 4
l UL: 4
l In the GL
mode
(dualstar/
CPRI
MUX),
the
maximu
m
distances
of the
RRUs
from the
BBU
vary with
the types
of BBP in
LTE
mode as
follows
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
UBB
Pd4 is
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
469
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
– Ce
ll
qu
ant
ity
≤
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
Antenna Capability
The following table lists the antenna capability of an RRU3928.
Table 5-515 Antenna capability of an RRU3928
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3928
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
470
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.34 RRU3929 Technical Specifications
RRU3929 modules are remote radio units and can work in different modes with different
configurations and the software-defined radio (SDR) technique.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3929.
Table 5-516 Modes and frequency bands supported by an RRU3929
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3929
900 EGSM
880 to 915
925 to 960
900 PGSM
890 to 915
935 to 960
GSM, UMTS,
LTE FDD, GU,
GL, and UL
1800
1710 to 1785
1805 to 1880
GSM, UMTS,
LTE FDD, GU,
and GL
RF Specifications
Table 5-517 lists radio frequency (RF) specifications of an RRU3929.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity is measured, as recommended in 3GPP TS 51.021, over the central band at
the antenna connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does
not exceed 2%. The central band is the 80% of the full band.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3929 that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies
with the EN 301 502 V9.2.1 standard.
l The RRU3929 that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the
900 or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104
standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
471
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-517 RF specifications of an RRU3929
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
RR
U3
929
2T
2R
GSM: 8
TRXs
GSM:
GSM:
GSM:
l 900
MHz:
-113.
7
l 900
MHz:
-116.5
l 900
MHz:
-119.2
(theor
etical
value)
UMTS:
l Witho
ut
MIM
O: 6
carrie
rs
l 1800
MHz:
-114.
0
l With
MIM
O: 4
carrie
rs
UMTS:
LTE
FDD: 2
carriers,
the
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz
l 1800
MHz:
-126.
1
l 900
MHz:
-125.
8
LTE
FDD:
l 900
MHz:
-106.
3
l 1800
MHz:
-106.
6
Issue 05 (2014-08-30)
l 1800
MHz:
-116.8
UMTS:
l 900
MHz:
-128.6
l 1800
MHz:
-128.9
l 1800
MHz:
-119.5
(theor
etical
value)
UMTS:
LTE
FDD:
l 900
MHz:
-131.3
l 900
MHz:
-109.1
l 1800
MHz:
-131.6
l 1800
MHz:
-109.4
LTE
FDD:
l 900
MHz:
-111.8
l 1800
MHz:
-112.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpt
ion
The RRU3929
supports the
maximum
power
configuration 2
x 60 W. The
typical
configurations
are as follows:
See the
RRU3929
sheet in
3900 Series
Base Station
Power
Consumptio
n
Specificatio
ns.
l Output
power for
the
RRU3929
(GSM, 900
MHz/1800
MHz)
l Output
power for
the
RRU3929
(UMTS,
900 MHz/
1800 MHz)
l Output
power for
the
RRU3929
(LTE
FDD, 900
MHz/1800
MHz)
472
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
l Output
power for
the
RRU3929
(GU nonMSR, 900
MHz/1800
MHz)
l Output
power for
the
RRU3929
(GU MSR,
900 MHz/
1800 MHz)
l Output
power for
the
RRU3929
(GL MSR,
900 MHz/
1800 MHz)
l Output
power for
the
RRU3929
(UL MSR,
900 MHz)
For typical PA
configurations,
see Typical
Power
Configuration
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
473
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
for RRU3929
in 3900 Series
Base Station
Initial
Configuration
Guide.
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3929 working in GSM mode: when the S1 or S2 configuration is applied, the maximum output
power of each carrier on the RRU3929 is 60 W. If the output power of 60 W is required, the related license
must be obtained.After design optimization, the 8PSK and GMSK modulation schemes enable the same
output power for each carrier on the RF module when any of the S1 through S6 configurations is used. When
the S7 or S8 configuration is used, the license controlling the GBFD-118104 Enhanced EDGE Coverage
feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes cannot enable the same
output power for each carrier on the RF module..
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
474
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-518 Output power for the RRU3929 (GSM, 900 MHz/1800 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
60
60
2
60
60
3
30
30
4
30
30
5
20
25
6
20
25
7
15
20
8
15
20
Table 5-519 Output power for the RRU3929 (UMTS, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
2
60
3
30
4
30
5
20
6
20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 30
3 (MIMO)
2 x 20
4 (MIMO)
2 x 15
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
475
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-520 Output power for the RRU3929 (LTE FDD, 900 MHz/1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 60
5, 10, 15, 20
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 30
1.4, 3, 5, 10, 15, 20
2 (MIMO)
l Carrier 1: 2 x 20
1.4, 3, 5, 10, 15, 20
l Carrier 2: 2 x 40
Table 5-521 Output power for the RRU3929 (GU non-MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
1
60
60
1
2
60
30
1
3
60
20
2
1
30
60
2
2
30
30
2
3
30
20
2
4
30
15
3
1
20
60
3
2
20
30
3
3
20
20
3
4
20
15
4
1
15
60
4
2
15
30
4
3
15
20
4
4
15
15
5
1
10
60
5
2
10
30
5
3
10
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
476
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
6
1
7
60
6
2
7
30
Table 5-522 Output power for the RRU3929 (GU MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
2
30
30
1
2
20
40
2
1
40
20
2
1
30
30
2
2
20
40
2
2
30
30
2
2
40
20
3
1
30
30
3
1
20
40
3
2
20
20
3
2
15
30
4
1
20
40
4
2
20
20
4
2
15
30
5
1
20
20
5
1
15
30
5
2
13
20
6
1
15
30
6
2
12
20
7
1
10
20
1
1 (MIMO)
20
2 x 40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
477
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
1
1 (MIMO)
30
2 x 30
1
1 (MIMO)
40
2 x 20
1
2 (MIMO)
20
2 x 20
2
1 (MIMO)
20
2 x 40
2
1 (MIMO)
30
2 x 30
2
1 (MIMO)
40
2 x 20
2
2 (MIMO)
20
2 x 20
2
2 (MIMO)
30
2 x 15
3
1 (MIMO)
20
2 x 20
3
1 (MIMO)
15
2 x 30
3
2 (MIMO)
15
2 x 15
3
2 (MIMO)
20
2 x 10
3
2 (MIMO)
10
2 x 20
4
1 (MIMO)
20
2 x 20
4
1 (MIMO)
15
2 x 30
4
2 (MIMO)
15
2 x 15
4
2 (MIMO)
20
2 x 10
4
2 (MIMO)
10
2 x 20
NOTE
Issue 05 (2014-08-30)
l
(a) indicates that the configuration is supported from SRAN7.0.
l
(b) indicates that the configuration is supported from SRAN7.0 and supported only at the 1800 MHz
frequency band.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
478
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-523 Output power for the RRU3929 (GL MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
40
2 x 20
1.4, 3, 5, 10,
15, 20
1
1 (MIMO)
30
2 x 30
1.4, 3, 5, 10,
15, 20
1
1 (MIMO)
20
2 x 40
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
40
2 x 20
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
30
2 x 30
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
20
2 x 40
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
3(b)
1 (MIMO)
(b)
15(b)
2 x 30(b)
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
4(a)
1 (MIMO)(a)
15(a)
2 x 30(a)
1.4, 3, 5, 10,
15, 20
5
1 (MIMO)
12
2 x 20
1.4, 3, 5, 10,
15, 20
5(b)
1 (MIMO)
(b)
7.5(b)
2 x 30(b)
1.4, 3, 5, 10,
15, 20
6
1 (MIMO)
12
2 x 20
1.4, 3, 5, 10,
15, 20
6(b)
1 (MIMO)
(b)
7.5(b)
2 x 30(b)
1.4, 3, 5, 10,
15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
479
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-524 Output power for the RRU3929 (UL MSR, 900 MHz)
Mode
Total
Number
of UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidt
h of LTE
FDD
Carrier
(MHz)
UMTS + LTE
FDD
1
1 (MIMO)
30
2 x 30
5, 10
1
1 (MIMO)
20
2 x 40
5, 10
2
1 (MIMO)
30
2 x 30
5, 10
2
1 (MIMO)
20
2 x 40
5, 10
3
1 (MIMO)
20
2 x 20
5, 10
3
1 (MIMO)
15
2 x 30
5, 10
4
1 (MIMO)
20
2 x 20
5, 10
4
1 (MIMO)
15
2 x 30
5, 10
Engineering Specifications
The following table lists the equipment specifications of an RRU3929.
Table 5-525 Equipment specifications of an RRU3929
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3929
-48 V DC; voltage range:
-36 V DC to -57 V DC
l 485 mm x 380 mm x
170 mm (with the
housing)
l 25 (with the housing)
NOTE
The RRU3929 supports
AC power supply when
connected to an external
AC/DC power module or
an OPM15M. For details,
see AC/DC Power Module
User Guide and OPM15M
User Guide.
l 23.5 (without the
housing)
l 485 mm x 356 mm x
140 mm (without the
housing)
The following table lists the environmental specifications of an RRU3929.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
480
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-526 Environmental specifications of an RRU3929
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3929
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+50°C
The following table lists the compliance standards for an RRU3929.
Table 5-527 Compliance standards for an RRU3929
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3929
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l 3GPP TS 25.141
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-528 lists the surge protection specifications of ports on an RRU3929.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
481
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-528 Surge protection specifications of ports on an RRU3929
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Issue 05 (2014-08-30)
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
482
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3929.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
483
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-529 Specifications of CPRI ports on an RRU3929
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3929
2
1.25, 2.5, or
4.9
Star, chain,
or dual-star
CPRI MUX:
l GU
(dualstar/
CPRI
MUX):
40
l GU: 6
l GL: 4
l UL: 4
l In the GL
mode
(dualstar/
CPRI
MUX),
the
maximu
m
distances
of the
RRUs
from the
BBU
vary with
the types
of BBP in
LTE
mode as
follows
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
UBB
Pd4 is
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
484
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
– Ce
ll
qu
ant
ity
≤
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
Antenna Capability
The following table lists the antenna capability of an RRU3929.
Table 5-530 Antenna capability of an RRU3929
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3929
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
485
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.35 RRU3936 Technical Specifications
RRU3936 modules are remote radio units and can work in different modes with different
configurations and the software-defined radio (SDR) technique.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3936.
Table 5-531 Modes and frequency bands supported by an RRU3936
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3936
850
824 to 849
869 to 894
GSM, UMTS,
and GU
900 EGSM
880 to 915
925 to 960
900 PGSM
890 to 915
935 to 960
GSM, UMTS,
and GU
1900
1850 to 1910
1930 to 1990
GSM, UMTS,
LTE FDD, GU,
GL, and UL
1800
1710 to 1785
1805 to 1880
GSM, UMTS,
LTE FDD, GU,
and GL
RF Specifications
Table 5-532 lists radio frequency (RF) specifications of an RRU3936.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
486
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity, as recommended in 3GPP TS 51.021, is measured at the antenna connector
on condition that the channel rate is 13 kbit/s and the Bit Error Rate (BER) is not higher than 2%.
l The UMTS receiver sensitivity, as recommended in 3GPP TS 25.104, is measured at the antenna connector
on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3936 that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies
with the EN 301 502 V9.2.1 standard.
l The RRU3936 that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the
900 or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104
standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
487
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-532 RF specifications of an RRU3936
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitivi
ty with
Four
Antenna
s
RR
U3
936
1T
2R
GSM: 8
TRXs
GSM:
GSM:
GSM:
l 850
MHz:
-113.4
l 850
MHz:
-116.2
l 900
MHz:
-113.7
l 900
MHz:
-116.5
l 850
MHz:
-118.9
(theor
etical
value)
l 1800
MHz:
-114.0
l 1800
MHz:
-116.8
l 1900
MHz:
-113.7
l 1900
MHz:
-116.5
UMTS:
UMTS:
l 850
MHz:
-125.5
l 850
MHz:
-128.3
l 900
MHz:
-125.8
l 900
MHz:
-128.6
l 1800
MHz:
-126.1
l 1800
MHz:
-128.9
l 1900
MHz:
-125.8
l 1900
MHz:
-128.6
LTE
FDD:
LTE
FDD:
UMTS: 6
carriers
LTE
FDD: 2
carriers,
the
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz
Issue 05 (2014-08-30)
l 900
MHz:
-119.2
(theor
etical
value)
l 1800
MHz:
-119.5
(theor
etical
value)
l 1900
MHz:
-119.2
(theor
etical
value)
UMTS:
l 850
MHz:
-131.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consump
tion
The RRU3936
supports the
maximum
power
configuration 1
x 80 W. The
typical
configurations
are as follows:
See the
RRU3936
sheet in
3900 Series
Base
Station
Power
Consumpti
on
Specificati
ons.
l Output
power for
the
RRU3936
(GSM, 850
MHz/900
MHz/1800
MHz/1900
MHz)
l Output
power for
the
RRU3936
(UMTS,
850 MHz/
900 MHz/
1800 MHz/
1900 MHz)
l Output
power for
the
RRU3936
488
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receiver
Sensitivi
ty with
One
Antenna
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitivi
ty with
Four
Antenna
s
l 1800
MHz:
-106.6
l 1800
MHz:
-109.4
l 900
MHz:
-131.3
l 1900
MHz:
-106.6
l 1900
MHz:
-109.4
l 1800
MHz:
-131.6
l 1900
MHz:
-131.3
LTE
FDD:
l 1800
MHz:
-112.1
l 1900
MHz:
-112.1
Output
Power
Power
Consump
tion
(LTE
FDD, 1800
MHz/1900
MHz)
l Output
power for
the
RRU3936
(GU MSR,
850 MHz/
900 MHz/
1800 MHz/
1900 MHz)
l Output
power for
the
RRU3936
(GL MSR,
1800 MHz)
l Output
power for
the
RRU3936
(GL MSR,
1900 MHz)
l Output
power for
the
RRU3936
(UL MSR,
1900 MHz)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
489
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3936 working in GSM mode: when the S1 configuration is applied, the maximum output power
of each carrier on the RRU3936 is 80 W. If the output power of 60 W or 80 W is required, the related license
must be obtained. After design optimization, the 8 phase shift keying (8PSK) and Gaussian minimum shiftfrequency keying (GMSK) modulation schemes enable the same output power for each carrier on the the
RF module when the S1, S2, or S3 configuration is used. When any of the S4 through S8 configurations is
used, the license controlling the GBFD-118104 Enhanced EDGE Coverage feature must be obtained.
Otherwise, the 8PSK and GMSK modulation schemes cannot enable the same output power for each carrier
on the RRU3936.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-533 Output power for the RRU3936 (GSM, 850 MHz/900 MHz/1800 MHz/1900 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
80
80
2
40
40
3
27
31
4
20
27
5
16
20
6
12
20
7
10
16
8
7
12
NOTE
In the following table, * indicates that the UMTS mode is supported in terms of hardware.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
490
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-534 Output power for the RRU3936 (UMTS, 850 MHz/900 MHz/1800 MHz/1900
MHz)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
80
2
40
3
25
4
20
5*
16*
6*
12*
Table 5-535 Output power for the RRU3936 (LTE FDD, 1800 MHz/1900 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1
60
5, 10, 15, 20
1
40
1.4, 3, 5, 10, 15, 20
2
40
1.4, 3, 5, 10
NOTE
In the following table, * indicates that SRAN7.0 or a later version supports the configuration.
Table 5-536 Output power for the RRU3936 (GU MSR, 850 MHz/900 MHz/1800 MHz/1900
MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
1
40
40
1
2
40
20
2
1
30
20
2
1
20
40
2
2
20
20
3
1
20
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
491
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
3
2
16
10
3*
2*
13*
20*
4
1
12
20
4
2
12
10
5
1
10
20
5
2
10
10
6
1
10
10
6
2
8
10
7
1
8
10
Table 5-537 Output power for the RRU3936 (GL MSR, 1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1
40
40
1.4, 3, 5, 10,
15, 20
2
1
20
40
1.4, 3, 5, 10,
15, 20
2
1
30
20
1.4, 3, 5, 10,
15, 20
3
1
20
20
1.4, 3, 5, 10,
15, 20
4
1
12
20
1.4, 3, 5, 10,
15, 20
5
1
10
20
1.4, 3, 5, 10,
15
6
1
10
10
1.4, 3, 5, 10,
15
7
1
8
10
1.4, 3, 5, 10,
15
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
492
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-538 Output power for the RRU3936 (GL MSR, 1900 MHz)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1
40
40
1.4, 3, 5, 10,
15, 20
2
1
20
40
1.4, 3, 5, 10,
15, 20
2
1
30
20
1.4, 3, 5, 10,
15, 20
3
1
20
20
1.4, 3, 5, 10,
15, 20
4
1
12
20
1.4, 3, 5, 10,
15, 20
5
1
10
20
1.4, 3, 5, 10,
15
6
1
10
10
1.4, 3, 5, 10,
15
7
1
8
10
1.4, 3, 5, 10,
15
1
2
20
30
1.4, 3, 5, 10
1
2
30
20
1.4, 3, 5, 10
2
2
20
20
1.4, 3, 5, 10
2
2
20
l Carrier 1:
15
1.4, 3, 5, 10
l Carrier 2:
25
2
2
20
l Carrier 1:
10
1.4, 3, 5, 10
l Carrier 2:
30
Issue 05 (2014-08-30)
3
2
13
20
1.4, 3, 5, 10
3
2
17
10
1.4, 3, 5, 10
4
2
12
10
1.4, 3, 5, 10
5
2
10
10
1.4, 3, 5, 10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
493
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
6
2
8
10
1.4, 3, 5, 10
Table 5-539 Output power for the RRU3936 (UL MSR, 1900 MHz)
Mode
Total
Number of
UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
1
1
40
40
1.4, 3, 5, 10,
15, 20
2
1
20
40
1.4, 3, 5, 10,
15, 20
2
1
30
20
1.4, 3, 5, 10,
15, 20
3
1
20
20
1.4, 3, 5, 10,
15, 20
1
2
20
30
1.4, 3, 5, 10
1
2
30
l Carrier 1:
20
1.4, 3, 5, 10
l Carrier 2:
40
2
2
20
20
1.4, 3, 5, 10
Engineering Specifications
The following table lists the equipment specifications of an RRU3936.
Table 5-540 Equipment specifications of an RRU3936
Issue 05 (2014-08-30)
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3936
-48 V DC; voltage range:
-36 V DC to -57 V DC
400 mm x 300 mm x 100
mm (without the shell)
13.5 (without the shell)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
494
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Input Power
Dimension (H x W x
D)
Weight (kg)
NOTE
The RRU3936 supports
AC power supply when
connected to an external
AC/DC power module or
an OPM15M. For details,
see AC/DC Power Module
User Guide and OPM15M
User Guide.
NOTE
RRU3936 does not have the housing by default.
The following table lists the environmental specifications of an RRU3936.
Table 5-541 Environmental specifications of an RRU3936
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3936
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+50°C
NOTE
According to
the installation
scenario,
traffic load,
and carrier
configuration,
the output
power of the
RRU3936
may
temporarily
decrease when
they work in
the highest 10°
C temperature
range.
The following table lists the compliance standards for an RRU3936.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
495
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-542 Compliance standards for an RRU3936
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3936
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l 3GPP TS 25.141
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-543 lists the surge protection specifications of ports on an RRU3936.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-543 Surge protection specifications of ports on an RRU3936
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Interconnect
ion port for
receiving RF
signals
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
496
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
RET port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3936.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
497
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-544 Specifications of CPRI ports on an RRU3936
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3936
2
1.25 or 2.5
Star, chain,
or dual-star
CPRI MUX:
l GU
(dualstar/
CPRI
MUX):
40
l GU: 6
l GL: 4
l In the GL
mode
(dualstar/
CPRI
MUX),
the
maximu
m
distances
of the
RRUs
from the
BBU
vary with
the types
of BBP in
LTE
mode as
follows
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
UBB
Pd4 is
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
498
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
– Ce
ll
qu
ant
ity
≤
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
Antenna Capability
The following table lists the antenna capability of an RRU3936.
Table 5-545 Antenna capability of an RRU3936
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3936
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
499
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.36 RRU3938 Technical Specifications
RRU3938 modules are remote radio units and can work in different modes with different
configurations and the software-defined radio (SDR) technique.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3938.
Table 5-546 Modes and frequency bands supported by an RRU3938
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3938
900
880 to 915
925 to 960
GSM, UMTS,
LTE FDD, GU,
GL, and UL
1800
1710 to 1785
1805 to 1880
GSM, UMTS,
LTE FDD, GU,
and GL
RF Specifications
Table 5-547 lists radio frequency (RF) specifications of an RRU3938.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity, as recommended in 3GPP TS 51.021, is measured at the antenna connector
on condition that the channel rate is 13 kbit/s and the Bit Error Rate (BER) is not higher than 2%.
l The UMTS receiver sensitivity, as recommended in 3GPP TS 25.104, is measured at the antenna connector
on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3938 that works in GSM mode and operates in the 900 or 1800 MHz frequency band complies
with the EN 301 502 V9.2.1 standard.
l The RRU3938 that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the
900 or 1800 MHz frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104
standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
500
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-547 RF specifications of an RRU3938
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
RR
U3
938
2T
2R
GSM: 8
TRXs
GSM:
GSM:
GSM:
l 900
MHz:
-113.
7
l 900
MHz:
-116.5
l 900
MHz:
-119.2
(theor
etical
value)
UMTS: 4
carriers
LTE
FDD: 2
carriers,
the
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz
l 1800
MHz:
-114.
0
UMTS:
l 900
MHz:
-125.
8
l 1800
MHz:
-126.
1
LTE
FDD:
l 900
MHz:
-106.
3
l 1800
MHz:
-106.
6
Issue 05 (2014-08-30)
l 1800
MHz:
-116.8
UMTS:
l 900
MHz:
-128.6
l 1800
MHz:
-128.9
LTE
FDD:
l 900
MHz:
-109.1
l 1800
MHz:
-109.4
l 1800
MHz:
-119.5
(theor
etical
value)
UMTS:
l 900
MHz:
-131.3
l 1800
MHz:
-131.6
LTE
FDD:
l 900
MHz:
-111.8
l 1800
MHz:
-112.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpt
ion
The RRU3938
supports the
maximum
power
configuration
2 x 40 W. The
typical
configurations
are as follows:
See the
RRU3938
sheet in
3900 Series
Base Station
Power
Consumptio
n
Specificatio
ns.
l Output
power for
the
RRU3938
(GSM, 900
MHz/1800
MHz)
l Output
power for
the
RRU3938
(UMTS,
900 MHz/
1800
MHz)
l Output
power for
the
RRU3938
(LTE
FDD, 900
501
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
MHz/1800
MHz)
l Output
power for
the
RRU3938
(GU nonMSR, 900
MHz/1800
MHz)
l Output
power for
the
RRU3938
(GU MSR,
900 MHz/
1800
MHz)
l Output
power for
the
RRU3938
(GL MSR,
900 MHz/
1800
MHz)
l Output
power for
the
RRU3938
(UL MSR,
900 MHz)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
502
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitivi
ty with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
For typical PA
configurations
, see Typical
Power
Configuration
for RRU3938
in 3900 Series
Base Station
Initial
Configuration
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
503
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3938 working in GSM mode: After design optimization, the 8PSK and GMSK modulation
schemes enable the same output power for each carrier on the RF module when any of the S1 through S6
configurations is used. When the S7 or S8 configuration is used, the license controlling the GBFD-118104
Enhanced EDGE Coverage feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes
cannot enable the same output power for each carrier on the RF module.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-548 Output power for the RRU3938 (GSM, 900 MHz/1800 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
40
40
2
40
40
3
20
20
4
20
20
5
13
15
6
13
15
7
10
13
8
10
13
Table 5-549 Output power for the RRU3938 (UMTS, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
504
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
2
40
3
20
4
20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 20
3 (MIMO)
2 x 10
4 (MIMO)
2 x 10
Table 5-550 Output power for the RRU3938 (LTE FDD, 900 MHz/1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 20
1.4, 3, 5, 10, 15, 20
Table 5-551 Output power for the RRU3938 (GU non-MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power Output Power
per GSM
per UMTS
Carrier (W)
Carrier (W)
GSM + UMTS
1
1
40
40
2
1
20
40
3
1
13
40
4
1
10
40
1
2
40
20
2
2
20
20
3
2
13
20
4
2
10
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
505
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-552 Output power for the RRU3938 (GU MSR, 900 MHz/1800 MHz)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
3
1
20
20
4
1
13
20
5
1
10
20
6
1
10
20
1
1 (MIMO)
20
2 x 20
2
1 (MIMO)
20
2 x 20
3
1 (MIMO)
10
2 x 20
4
1 (MIMO)
10
2 x 20
1
2 (MIMO)
20
2 x 10
2
2 (MIMO)
20
2 x 10
3
2 (MIMO)
10
2 x 10
4
2 (MIMO)
10
2 x 10
Table 5-553 Output power for the RRU3938 (GL MSR, 900 MHz/1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
10
2 x 20
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
15
2 x 10
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
10
2 x 20
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
15
2 x 10
1.4, 3, 5, 10,
15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
506
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
5
1 (MIMO)
10
2 x 10
1.4, 3, 5, 10,
15, 20
6
1 (MIMO)
10
2 x 10
1.4, 3, 5, 10,
15, 20
Table 5-554 Output power for the RRU3938 (UL MSR, 900 MHz)
Mode
Total
Number
of UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidt
h of LTE
FDD
Carrier
(MHz)
UMTS + LTE
FDD
1
1 (MIMO)
20
2 x 20
5, 10
2
1 (MIMO)
20
2 x 20
5, 10
3
1 (MIMO)
10
2 x 20
5, 10
4
1 (MIMO)
10
2 x 20
5, 10
Engineering Specifications
The following table lists the equipment specifications of an RRU3938.
Table 5-555 Equipment specifications of an RRU3938
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3938
-48 V DC; voltage range:
-36 V DC to -57 V DC
400 mm x 300 mm x 100
mm (without the
housing)
13.5 (without the
housing)
NOTE
The RRU3938 supports
AC power supply when
connected to an external
AC/DC power module or
an OPM15M. For details,
see AC/DC Power Module
User Guide and OPM15M
User Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
507
3900 Series Base Station
Technical Description
5 Product Specifications
The following table lists environmental specifications of an RRU3938.
Table 5-556 Environmental specifications of an RRU3938
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3938
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+50°C
NOTE
According to
the installation
scenario,
traffic load,
and carrier
configuration,
the output
power of the
RRU3938
may
temporarily
decrease when
they work in
the highest 10°
C temperature
range.
The following table lists the compliance standards for an RRU3938.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
508
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-557 Compliance standards for an RRU3938
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3938
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l 3GPP TS 25.141
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-558 lists the surge protection specifications of ports on an RRU3938.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-558 Surge protection specifications of ports on an RRU3938
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Interconnect
ion port for
receiving RF
signals
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
509
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
RETa port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3938.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
510
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-559 Specifications of CPRI ports on an RRU3938
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3938
2
1.25, 2.5, or
4.9
Star, chain,
or dual-star
CPRI MUX:
l GU
(dualstar/
CPRI
MUX):
40
l GU: 6
l GL: 4
l UL: 4
l In the GL
mode
(dualstar/
CPRI
MUX),
the
maximu
m
distances
of the
RRUs
from the
BBU
vary with
the types
of BBP in
LTE
mode as
follows
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
UBB
Pd4 is
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
511
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
– Ce
ll
qu
ant
ity
≤
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
Antenna Capability
The following table lists the antenna capability of an RRU3938.
Table 5-560 Antenna capability of an RRU3938
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3938
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
512
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.37 RRU3939 Technical Specifications
RRU3939 modules are remote radio units and can work in different modes with different
configurations and the software-defined radio (SDR) technique.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3939.
Table 5-561 Modes and frequency bands supported by an RRU3939
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3939
1800
1710 to 1785
1805 to 1880
GSM, LTE FDD,
and GL
RF Specifications
Table 5-562 lists radio frequency (RF) specifications of an RRU3939.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l The GSM receiver sensitivity, as recommended in 3GPP TS 51.021, is measured at the antenna connector
on condition that the channel rate is 13 kbit/s and the Bit Error Rate (BER) is not higher than 2%.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3939 that works in GSM mode and operates in the 1800 MHz frequency band complies with the
EN 301 502 V9.2.1 standard.
l The RRU3939 that works in LTE FDD or multiple service ring (MSR) mode and operates in the 1800 MHz
frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104 standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
513
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-562 RF specifications of an RRU3939
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
RR
U3
939
2T
2R
GSM: 8
TRXs
GSM:
-114.0
GSM:
-116.8
LTE
FDD: 2
carriers,
the
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz
LTE
FDD:
-106.6
LTE
FDD:
-109.4
GSM:
-119.5
(theoretic
al value)
LTE
FDD:
-112.1
Output
Power
Power
Consumpt
ion
The RRU3939
supports the
maximum
power
configuration 2
x 60 W. The
typical
configurations
are as follows:
See the
RRU3939
sheet in
3900 Series
Base Station
Power
Consumptio
n
Specificatio
ns.
l Output
power for
the
RRU3939
(GSM,
1800 MHz)
l Output
power for
the
RRU3939
(LTE
FDD, 1800
MHz)
l Output
power for
the
RRU3939
(GL MSR,
1800 MHz)
For typical PA
configurations,
see Typical
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
514
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
Power
Configuration
for RRU3939
in 3900 Series
Base Station
Initial
Configuration
Guide.
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3939 working in GSM mode: when the S1 or S2 configuration is applied, the maximum output
power of each carrier on the RRU3939 is 60 W. If the output power of 60 W is required, the related license
must be obtained.After design optimization, the 8PSK and GMSK modulation schemes enable the same
output power for each carrier on the RF module when any of the S1 through S6 configurations is used. When
the S7 or S8 configuration is used, the license controlling the GBFD-118104 Enhanced EDGE Coverage
feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes cannot enable the same
output power for each carrier on the RF module.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
515
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-563 Output power for the RRU3939 (GSM, 1800 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
60
60
2
60
60
3
30
30
4
30
30
5
20
25
6
20
25
7
15
20
8
15
20
Table 5-564 Output power for the RRU3939 (LTE FDD, 1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 60
5, 10, 15, 20
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 30
1.4, 3, 5, 10, 15, 20
2 (MIMO)
l Carrier 1: 2 x 20
1.4, 3, 5, 10, 15, 20
l Carrier 2: 2 x 40
Table 5-565 Output power for the RRU3939 (GL MSR, 1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
40
2 x 20
1.4, 3, 5, 10,
15, 20
1
1 (MIMO)
30
2 x 30
1.4, 3, 5, 10,
15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
516
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
1
1 (MIMO)
20
2 x 40
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
40
2 x 20
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
30
2 x 30
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
20
2 x 40
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
15
2 x 30
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
15
2 x 30
1.4, 3, 5, 10,
15, 20
5
1 (MIMO)
12
2 x 20
1.4, 3, 5, 10,
15, 20
5
1 (MIMO)
7.5
2 x 30
1.4, 3, 5, 10,
15, 20
6
1 (MIMO)
12
2 x 20
1.4, 3, 5, 10,
15, 20
6
1 (MIMO)
7.5
2 x 30
1.4, 3, 5, 10,
15, 20
Engineering Specifications
The following table lists the equipment specifications of an RRU3939.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
517
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-566 Equipment specifications of an RRU3939
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3939
-48 V DC; voltage range:
-36 V DC to -57 V DC
400 mm x 300 mm x 150
mm (without the
housing)
20 (without the housing)
NOTE
The RRU3939 supports
AC power supply when
connected to an external
AC/DC power module or
an OPM15M. For details,
see AC/DC Power Module
User Guide and OPM15M
User Guide.
The following table lists the environmental specifications of an RRU3939.
Table 5-567 Environmental specifications of an RRU3939
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3939
l Without
solar
radiation:
-40°C to
+55°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+50°C
NOTE
According to
the installation
scenario,
traffic load,
and carrier
configuration,
the output
power of the
RRU3939
may
temporarily
decrease when
they work in
the highest 10°
C temperature
range.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
518
3900 Series Base Station
Technical Description
5 Product Specifications
The following table lists the compliance standards for an RRU3939.
Table 5-568 Compliance standards for an RRU3939
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3939
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-569 lists the surge protection specifications of ports on an RRU3939.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-569 Surge protection specifications of ports on an RRU3939
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Interconnect
ion port for
receiving RF
signals
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
519
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
RET port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3939.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
520
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-570 Specifications of CPRI ports on an RRU3939
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3939
2
1.25, 2.5, or
4.9
Star, chain,
or dual-star
GL CPRI
MUX: 4
The
maximum
distances of
the RRUs
from the
BBU vary
with the
types of BBP
in LTE mode
as follows:
l When the
LBBPc,
LBBPd1,
or
UBBPd3
is
configure
d: 20
l When the
LBBPd2
or
UBBPd4
is
configure
d: 40
l When the
LBBPd3 ,
UBBPd5,
or
UBBPd6
is
configure
d:
– Cell
quanti
ty ≤
3: 40
– Cell
quanti
ty ≥
4: 20
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
521
3900 Series Base Station
Technical Description
5 Product Specifications
Antenna Capability
The following table lists the antenna capability of an RRU3939.
Table 5-571 Antenna capability of an RRU3939
Type
TMA Support
Supported RET Antennas
RRU3939
Supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.38 RRU3942 Technical Specifications
RRU3942 modules are remote radio units and can work in different modes with different
configurations and the software-defined radio (SDR) technique.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3942.
Table 5-572 Modes and frequency bands supported by an RRU3942
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3942
1900
1850 to 1910
1930 to 1990
GSM, UMTS,
LTE FDD, GU,
GL, UL, and
GUL
850
824 to 849
869 to 894
GSM, UMTS,
LTE FDD, GU,
and UL
RF Specifications
Table 5-573 lists radio frequency (RF) specifications of an RRU3942.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
522
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W. C W + D W in the Output Power column
indicates that this RF module is configured with 2 transmit channels and the maximum output power of the
transmit channel is C W and D W, respectively.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity is measured, as recommended in 3GPP TS 51.021, over the central band at
the antenna connector on condition that the channel rate reaches 13 kbit/s and the bit error rate (BER) does
not exceed 2%. The central band is the 80% of the full band.
l The UMTS receiver sensitivity is measured, as recommended in 3GPP TS 25.104, over the full band at the
antenna connector on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3942 that works in GSM mode and operates in the 850 MHz/1900 MHz frequency band complies
with the 3GPP TS 45.005 V10.2.0 and 3GPP TS 51.021 V10.2.0 standards.
l The RRU3942 that works in UMTS, LTE FDD, or multiple service ring (MSR) mode and operates in the
850 MHz/1900 MHz frequency band complies with the 3GPP TS 37.104 V10.4.0 and TS 37.141 V10.4.0
standards.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
523
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-573 RF specifications of an RRU3942
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
RR
U3
942
2T
4R
GSM: 8
TRXs
GSM:
GSM:
GSM:
l 850
MHz:
-113.
4
l 850
MHz:
-116.2
l 850
MHz:
-118.9
(theor
etical
value)
UMTS:
l Witho
ut
MIM
O: 6
carrie
rs
l 1900
MHz:
-113.
7
l With
MIM
O: 4
carrie
rs
UMTS:
LTE
FDD: 2
carriers,
the
bandwidt
h per
carrier is
1.4, 3, 5,
10, 15, or
20 MHz
l 1900
MHz:
-125.
8
l 850
MHz:
-125.
5
LTE
FDD:
l 850M
Hz:
-106.
0
l 1900
MHz:
-106.
3
Issue 05 (2014-08-30)
l 1900
MHz:
-116.5
UMTS:
l 850
MHz:
-128.3
l 1900
MHz:
-128.6
l 1900
MHz:
-119.2
(theor
etical
value)
UMTS:
LTE
FDD:
l 850
MHz:
-131
l 850M
Hz:
-108.8
l 1900
MHz:
-131.3
l 1900
MHz:
-109.1
LTE
FDD:
l 850M
Hz:
-111.5
l 1900
MHz:
-111.8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpt
ion
The RRU3942
supports the
maximum
power
configuration 2
x 60 W or 40 W
+80 W. The
typical
configurations
are as follows:
See the
RRU3942
sheet in
3900 Series
Base Station
Power
Consumptio
n
Specificatio
ns.
l Output
power for
the
RRU3942
(GSM, 850
MHz/
1900MHz,
2x60 W)
l Output
power for
the
RRU3942
(UMTS,
850 MHz/
1900MHz,
2x60 W)
l Output
power for
the
RRU3942
(LTE FDD,
524
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
850 MHz,
2x60 W)
l Output
power for
the
RRU3942
(LTE FDD,
1900 MHz,
2x60 W)
l Output
power for
the
RRU3942
(GSM, 850
MHz/1900
MHz, 40 W
+80 W)
l Output
power for
the
RRU3942
(UMTS,
850 MHz/
1900 MHz,
40 W+80
W)
l Output
power for
the
RRU3942
(GU nonMSR, 850
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
525
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
MHz/1900
MHz, 2x60
W)
l Output
power for
the
RRU3942
(GU nonMSR, 850
MHz/1900
MHz, 40 W
+80 W)
l Output
power for
the
RRU3942
(GU MSR,
850 MHz/
1900 MHz,
2x60 W)
l Output
power for
the
RRU3942
(GU MSR,
850 MHz/
1900 MHz,
40 W+80
W)
l Output
power for
the
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
526
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
RRU3942
(GL MSR,
1900 MHz,
2x60 W)
l Output
power for
the
RRU3942
(GL MSR,
1900 MHz,
40 W+80
W)
l Output
power for
the
RRU3942
(UL MSR,
850 MHz,
2x60 W)
l Output
power for
the
RRU3942
(UL MSR,
1900 MHz,
2x60 W)
l Output
power for
the
RRU3942
(UL MSR,
1900 MHz,
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
527
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receiver
Sensitiv
ity with
Two
Antenna
s
Receiver
Sensitiv
ity with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
40 W+80
W)
l Output
power for
the
RRU3942
(GUL
MSR, 1900
MHz, 2x60
W)
For typical PA
configurations,
see Typical
Power
Configuration
for RRU3942
in 3900 Series
Base Station
Initial
Configuration
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
528
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3942 working in GSM mode: when the S1 configuration is applied, the maximum output power
of each carrier on the RRU3942 is 80 W; when the S2 configuration is applied, the maximum output power
of each carrier on the RRU3942 is 60 W. If the output power of 60 W or 80 W is required, the related license
must be obtained. After design optimization, the 8PSK and GMSK modulation schemes enable the same
output power for each carrier on the RF module when any of the S1 through S6 configurations is used. When
the S7 or S8 configuration is used, the license controlling the GBFD-118104 Enhanced EDGE Coverage
feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes cannot enable the same
output power for each carrier on the RF module..
l The RRU3942 supports 2 x 60 W or 40 W + 80 W configuration. The "40 W + 80 W" configuration does
not apply to typical scenarios. When this configuration is used, only power of channel B can be 80 W.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-574 Output power for the RRU3942 (GSM, 850 MHz/1900MHz, 2 x 60 W)
Issue 05 (2014-08-30)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
60
60
2
60
60
3
30
30
4
30
30
5
20
25
6
20
25
7
15
20
8
15
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
529
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-575 Output power for the RRU3942 (UMTS, 850 MHz/1900MHz, 2 x 60 W)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
2
60
3
30
4
30
5
20
6
20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 30
3 (MIMO)
2 x 20
4 (MIMO)
2 x 15
Table 5-576 Output power for the RRU3942 (LTE FDD, 850 MHz, 2 x 60 W)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 60
5, 10
2 (MIMO)
l Carrier 1: 2 x 10
l Carrier 1: 1.4
l Carrier 2: 2 x 50
l Carrier 2: 5, 10
Table 5-577 Output power for the RRU3942 (LTE FDD, 1900 MHz, 2 x 60 W)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 60
5, 10, 15, 20
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 30
1.4, 3, 5, 10, 15, 20
2 (MIMO)
l Carrier 1: 2 x 20
1.4, 3, 5, 10, 15, 20
l Carrier 2: 2 x 40
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
530
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-578 Output power for the RRU3942 (GSM, 850 MHz/1900 MHz, 40 W+80 W)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
80
80
2
40
40
3
40
40
4
27
27
5
20
20
6
20
20
7
16
20
8
13
15
Table 5-579 Output power for the RRU3942 (UMTS, 850 MHz/1900 MHz, 40 W+80 W)
Mode
Total Number of UMTS
Carriers
Output Power per
UMTS Carrier (W)
UMTS
1
80
3
40
6
20
NOTE
(a) indicates that the configuration is supported from SRAN8.0 and that the power values used by PA1 and PA2
cannot be interchanged when the configuration is applied.
Table 5-580 Output power for the RRU3942 (GU non-MSR, 850 MHz/1900 MHz, 2 x 60 W)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power Output Power
per GSM
per UMTS
Carrier (W)
Carrier (W)
GSM + UMTS
1
1
60
60
1
2
60
30
1
3
60
20
2
1
30
60
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
531
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power Output Power
per GSM
per UMTS
Carrier (W)
Carrier (W)
2
2
30
30
2
3
30
20
2
4
30
15
3
1
20
60
3
2
20
30
3
3
20
20
3
4
20
15
4
1
15
60
4
2
15
30
4
3
15
20
4
4
15
15
5
1
10
60
5
2
10
30
5
3
10
20
6
1
7
60
6
2
7
30
6(a)
2(a)
10(a)
30(a)
6(a)
3(a)
10(a)
20(a)
Table 5-581 Output power for the RRU3942 (GU non-MSR, 850 MHz/1900 MHz, 40 W+80
W)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
1
80
40
1
1
40
80
1
2
80
20
1
2
40
40
1
3
80
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
532
3900 Series Base Station
Technical Description
Mode
Issue 05 (2014-08-30)
5 Product Specifications
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
1
3
40
25
1
4
80
10
2
1
40
40
2
1
20
80
2
2
40
20
2
2
20
40
2
3
40
10
2
3
20
25
2
4
40
10
2
4
20
20
3
1
27
40
3
1
13
80
3
2
27
20
3
2
13
40
3
3
27
10
3
3
13
25
3
4
27
10
3
4
13
20
4
1
20
40
4
1
10
80
4
2
20
20
4
2
10
40
4
3
20
10
4
3
10
25
4
4
20
10
4
4
10
20
5
1
16
40
5
2
16
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
533
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
5
3
16
10
6
1
12
40
6
2
12
20
7
1
6
40
Table 5-582 Output power for the RRU3942 (GU MSR, 850 MHz/1900 MHz, 2 x 60 W)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
2
30
30
1
2
20
40
2
1
40
20
2
1
30
30
2
2
20
40
2
2
30
30
2
2
40
20
3
1
30
30
3
1
20
40
3
2
20
20
3
2
15
30
4
1
20
40
4
2
20
20
4
2
15
30
5
1
20
20
5
1
15
30
5
2
13
20
6
1
15
30
6
2
12
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
534
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
7
1
10
20
1
1 (MIMO)
20
2 x 40
1
1 (MIMO)
30
2 x 30
1
1 (MIMO)
40
2 x 20
1
2 (MIMO)
20
2 x 20
2
1 (MIMO)
20
2 x 40
2
1 (MIMO)
30
2 x 30
2
1 (MIMO)
40
2 x 20
2
2 (MIMO)
20
2 x 20
2
2 (MIMO)
30
2 x 15
3
1 (MIMO)
20
2 x 20
3
1 (MIMO)
15
2 x 30
3
2 (MIMO)
15
2 x 15
3
2 (MIMO)
20
2 x 10
3
2 (MIMO)
10
2 x 20
4
1 (MIMO)
20
2 x 20
4
1 (MIMO)
15
2 x 30
4
2 (MIMO)
15
2 x 15
4
2 (MIMO)
20
2 x 10
4
2 (MIMO)
10
2 x 20
NOTE
(b) indicates that the configuration is supported only at the 1900 MHz frequency band.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
535
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-583 Output power for the RRU3942 (GU MSR, 850 MHz/1900 MHz, 40 W+80 W)
Mode
Total Number
of GSM
Carriers
Total
Number of
UMTS
Carriers
Output Power per
GSM Carrier (W)
Output
Power per
UMTS
Carrier (W)
GSM +
UMTS
1
2
40
40
1
3
40
20
1
4
40
20
2
1
40
40
2
2
40
20
2(b)
2(b)
20(b)
40(b)
2
3
30
20
3
1
20
40
3
2
20
30
3
2
13
40
5
1
20
20
6
1
10
20
1
1 (MIMO)
40
2 x 40
1
2 (MIMO)
40
2 x 20
2
1 (MIMO)
30
2 x 20
2
2 (MIMO)
20
2 x 20
4
1 (MIMO)
20
2 x 20
4
2 (MIMO)
10
2 x 10
NOTE
(c) indicates that the configuration is not supported in SRAN8.1.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
536
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-584 Output power for the RRU3942 (GL MSR, 1900 MHz, 2 x 60 W)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
40
2 x 20
1.4, 3, 5, 10,
15, 20
1
1 (MIMO)
30
2 x 30
1.4, 3, 5, 10,
15, 20
1
1 (MIMO)
20
2 x 40
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
40
2 x 20
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
30
2 x 30
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
20
2 x 40
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
15
2 x 30
1.4, 3, 5, 10,
15, 20
5
1 (MIMO)
12
2 x 20
1.4, 3, 5, 10,
15, 20
6
1 (MIMO)
12
2 x 20
1.4, 3, 5, 10,
15, 20
6(c)
1 (MIMO)(c)
15(c)
2 x 10(c)
5, 10, 15, 20
(c)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
537
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-585 Output power for the RRU3942 (GL MSR, 1900 MHz, 40 W+80 W)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
5
1 (MIMO)
12
2 x 20
5, 10, 15, 20
6
1 (MIMO)
15
2 x 10
5, 10, 15, 20
7
1 (MIMO)
12
2 x 10
5, 10, 15, 20
7
1 (MIMO)
10
2 x 20
5, 10, 15, 20
8
1 (MIMO)
10
2 x 10
5, 10, 15, 20
Table 5-586 Output power for the RRU3942 (UL MSR, 850 MHz, 2 x 60 W)
Issue 05 (2014-08-30)
Mode
Total
Number of
UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidt
h of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
1
1 (MIMO)
30
2 x 30
5
1
1 (MIMO)
20
2 x 40
10
1
1 (MIMO)
40
2 x 20
1.4
2
1 (MIMO)
30
2 x 30
1.4, 5
2
1 (MIMO)
40
2 x 20
1.4, 5
1 (MIMO)
2 (MIMO)
2 x 20
2 x 20
1.4, 5
1
2 (MIMO)
20
l Carrier
1: 2 x 10
l Carrier
1: 1.4
l Carrier
2: 2 x 30
l Carrier
2: 5
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
538
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-587 Output power for the RRU3942 (UL MSR, 1900 MHz, 2 x 60 W)
Mode
Total
Number of
UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidt
h of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
2
1 (MIMO)
30
2 x 30
1.4, 3, 5, 10,
15, 20
1 (MIMO)
1 (MIMO)
2 x 30
2 x 30
1.4, 3, 5, 10,
15, 20
1 (MIMO)
1 (MIMO)
2 x 20
2 x 40
1.4, 3, 5, 10,
15, 20
1 (MIMO)
1 (MIMO)
2 x 40
2 x 20
1.4, 3, 5, 10,
15, 20
2 (MIMO)
1 (MIMO)
2 x 20
2 x 20
1.4, 3, 5, 10,
15, 20
1 (MIMO) + 2
(non-MIMO)
1 (MIMO)
2 x 10
(MIMO) + 20
(non-MIMO)
2 x 20
1.4, 3, 5, 10,
15, 20
3 (MIMO)(c)
1 (MIMO)
(c)
2 x 15(c)
2 x 15(c)
1.4, 3, 5, 10,
15, 20(c)
4 (MIMO)(c)
1 (MIMO)
(c)
2 x 10(c)
2 x 20(c)
1.4, 3, 5, 10,
15, 20(c)
Table 5-588 Output power for the RRU3942 (UL MSR, 1900 MHz, 40 W+80 W)
Issue 05 (2014-08-30)
Mode
Total
Number of
UMTS
Carriers
Total
Number
of LTE
FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
1
1 (MIMO)
40
2 x 40
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
539
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-589 Output power for the RRU3942 (GUL MSR, 1900 MHz, 2 x 60 W)
Issue 05 (2014-08-30)
Mode
Total
Numbe
r of
GSM
Carriers
Total
Numbe
r of
UMTS
Carriers
Total
Numb
er of
LTE
FDD
Carrier
s
Output
Power
per
GSM
Carrier
(W)
Output
Power
per
UMTS
Carrier
(W)
Output
Power
per LTE
FDD
Carrier
(W)
Bandwi
dth of
LTE
FDD
Carrier
(MHz)
GSM +
UMTS +
LTE
FDD
1
1
1
(MIMO
)
40
40
2 x 20
5, 10
2
1
1
(MIMO
)
20
40
2 x 20
5, 10
3
1
1
(MIMO
)
12
40
2 x 20
5, 10
4(a)
1(a)
1
(MIMO
)(a)
10(a)
40(a)
2 x 20(a)
5, 10(a)
1
2
1
(MIMO
)
40
20
2 x 20
5, 10
2
2
1
(MIMO
)
20
20
2 x 20
5, 10
3
2
1
(MIMO
)
12
20
2 x 20
5, 10
4
2
1
(MIMO
)
10
20
2 x 20
5, 10
1
1
1
(MIMO
)
30
30
2 x 30
5, 10
2
1
1
(MIMO
)
15
30
2 x 30
5, 10
1
2
1
(MIMO
)
30
15
2 x 30
5, 10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
540
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Numbe
r of
GSM
Carriers
Total
Numbe
r of
UMTS
Carriers
Total
Numb
er of
LTE
FDD
Carrier
s
Output
Power
per
GSM
Carrier
(W)
Output
Power
per
UMTS
Carrier
(W)
Output
Power
per LTE
FDD
Carrier
(W)
Bandwi
dth of
LTE
FDD
Carrier
(MHz)
2
2
1
(MIMO
)
15
15
2 x 30
5, 10
Engineering Specifications
The following table lists the equipment specifications of an RRU3942.
Table 5-590 Equipment specifications of an RRU3942
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3942
-48 V DC; voltage range:
-36 V DC to -57 V DC
l 485 mm x 380 mm x
170 mm (with the
housing)
l 25 (with the housing)
NOTE
The RRU3942 supports
AC power supply when
connected to an external
AC/DC power module or
an OPM15M. For details,
see AC/DC Power Module
User Guide and OPM15M
User Guide.
l 23.5 (without the
housing)
l 485 mm x 356 mm x
140 mm (without the
housing)
The following table lists the environmental specifications of an RRU3942.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
541
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-591 Environmental specifications of an RRU3942
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3942
l Without
solar
radiation:
-40°C to
+50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
l With solar
radiation:
-40°C to
+45°C
The following table lists the compliance standards for an RRU3942.
Table 5-592 Compliance standards for an RRU3942
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3942
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l 3GPP TS 25.141
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-593 lists the surge protection specifications of ports on an RRU3942.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
542
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-593 Surge protection specifications of ports on an RRU3942
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Applicable
to all
scenarios
Surge
current
Interconnect
ion port for
receiving RF
signals
Applicable
to all
scenarios
Surge
RET port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Dry contact
or RS485
alarm port
Issue 05 (2014-08-30)
250 A
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
3 kA
Common
mode
5 kA
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
543
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3942.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
544
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-594 Specifications of CPRI ports on an RRU3942
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3942
2
1.25, 2.5, or
4.9
Star, chain,
or dual-star
CPRI MUX:
l GU
(dualstar/
CPRI
MUX):
40
l GU: 6
l GL: 4
l UL: 4
l GUL: 4
l In the
GL, UL,
or GUL
mode
(dualstar/
CPRI
MUX),
the
maximu
m
distances
of the
RRUs
from the
BBU
vary with
the types
of BBP in
LTE
mode as
follows
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
545
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
UBB
Pd4 is
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
– Ce
ll
qu
ant
ity
≤
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
Antenna Capability
The following table lists the antenna capability of an RRU3942.
Table 5-595 Antenna capability of an RRU3942
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3942
Supported
AISG2.0 and AISG1.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
546
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.39 RRU3961 Technical Specifications
RRU3961 modules are remote radio units and can work in different modes with different
configurations and the software-defined radio (SDR) technique.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3961.
Table 5-596 Modes and frequency bands supported by an RRU3961
Type
Frequency
Band (MHz)
Receive
Frequency
Band (MHz)
Transmit
Frequency
Band (MHz)
Mode
RRU3961
900
880 to 915
925 to 960
GSM, UMTS,
and GU
800
832 to 862
791 to 821
LTE FDD
900 + 800
l 900: 880 to
915
l 900: 925 to
960
l 800: 832 to
862
l 800: 791 to
821
GSM (900 MHz)
+ LTE FDD (800
MHz), UMTS
(900 MHz) +
LTE FDD (800
MHz), and GU
(900 MHz) +
LTE FDD (800
MHz)
RF Specifications
Table 5-597 lists radio frequency (RF) specifications of an RRU3961.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
547
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l EF MSR indicates that E and F data is carried on the same transmit channel of an RF module.
l EF non-MSR indicates that E data is carried on one transmit channel of an RF module while F data is carried
on the other transmit channel of the RF module.
l The GSM receiver sensitivity, as recommended in 3GPP TS 51.021, is measured at the antenna connector
on condition that the channel rate is 13 kbit/s and the Bit Error Rate (BER) is not higher than 2%.
l The UMTS receiver sensitivity, as recommended in 3GPP TS 25.104, is measured at the antenna connector
on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l The RRU3961 that works in GSM mode and operates in the 900 MHz frequency band complies with the
EN 301 502 V9.2.1 standard.
l The RRU3961 that works in UMTS or multiple service ring (MSR) mode and operates in the 900 MHz
frequency band complies with the ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104 standards.
l The RRU3961 that works in LTE FDD mode and operates in the 800 MHz frequency band complies with
the 3GPP TS 36.141 standard.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
548
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-597 RF specifications of an RRU3961
Issue 05 (2014-08-30)
Ty
pe
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
RR
U3
961
2T
2R
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receiver
Sensitivi
ty with
Four
Antenna
s
GSM: 8
TRXs
GSM:
-113.7
GSM:
-116.5
UMTS: 4
carriers
UMTS:
-125.8
UMTS:
-128.6
GSM:
-119.2
(theoretic
al value)
LTE
FDD: 2
carriers.
When
one
carrier is
configure
d, the
bandwidt
h of this
carrier is
10 MHz
or 20
MHz.
When
two
carriers
are
configure
d, the
bandwidt
h per
carrier is
10 MHz.
LTE
FDD:
-106.3
LTE
FDD:
-109.1
UMTS:
-131.3
LTE
FDD:
-111.8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Output
Power
Power
Consumpt
ion
The RRU3961
supports the
maximum
power
configuration 2
x 40 W. The
typical
configurations
are as follows:
See the
RRU3961
sheet in
3900 Series
Base Station
Power
Consumptio
n
Specificatio
ns.
l Output
power for
the
RRU3961
(GSM, 900
MHz)
l Output
power for
the
RRU3961
(UMTS,
900 MHz)
l Output
power for
the
RRU3961
(LTE FDD,
800 MHz)
l Output
power for
the
RRU3961
549
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receiver
Sensitivi
ty with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
(GU nonMSR, 900
MHz)
l Output
power for
the
RRU3961
(GU MSR,
900 MHz)
l Output
power for
the
RRU3961
(GL, GSM
900 MHz
+LTE FDD
800 MHz)
l Output
power for
the
RRU3961
(UL,
UMTS 900
MHz+LTE
FDD 800
MHz)
l Output
power for
the
RRU3961
(GUL, GU
MSR 900
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
550
3900 Series Base Station
Technical Description
Ty
pe
5 Product Specifications
Tr
an
s
mi
t
an
d
Re
ce
iv
e
C
ha
nn
el
s
Capacit
y
Receiver Sensitivity (dBm)
Receive
r
Sensitiv
ity with
One
Antenn
a
Receive
r
Sensitiv
ity with
Two
Antenn
as
Receiver
Sensitivi
ty with
Four
Antenna
s
Output
Power
Power
Consumpt
ion
MHz+LTE
FDD 800
MHz)
For typical PA
configurations,
see Typical
Power
Configuration
for RRU3961
in 3900 Series
Base Station
Initial
Configuration
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
551
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l If the power sharing feature is activated, assume that UEs in a cell are randomly located.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l Station spacing, frequency multiplexing factor, power control algorithm, and traffic model all affect the
gains of dynamic power sharing. In most cases, network plans are designed on the basis of power
specifications of dynamic power sharing.
l Before activating the dynamic power sharing feature, enable the DTX and power control functions. In
GBSS8.1, the dynamic power sharing feature is mutually exclusive with the GBFD-113201 Concentric Cell,
GBFD-114501 Co-BCCH Cell, GBFD-118001 BCCH Dense Frequency Multiplexing, and GBFD-117501
Enhanced Measurement Report (EMR) features. In GBSS9.0 and later versions, the dynamic power sharing
feature can be used together with these features. However, the dynamic power sharing feature currently
cannot be used together with the GBFD-117002 IBCA (Interference Based Channel Allocation),
GBFD-117001 Flex MAIO, GBFD-118701 RAN Sharing, and GBFD-114001 Extended Cell features in
GBSS8.1, GBSS9.0, and later versions.
l For the RRU3961 working in GSM mode: After design optimization, the 8PSK and GMSK modulation
schemes enable the same output power for each carrier on the RF module when any of the S1 through S6
configurations is used. When the S7 or S8 configuration is used, the license controlling the GBFD-118104
Enhanced EDGE Coverage feature must be obtained. Otherwise, the 8PSK and GMSK modulation schemes
cannot enable the same output power for each carrier on the RF module.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Table 5-598 Output power for the RRU3961 (GSM, 900 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
40
40
2
40
40
3
20
20
4
20
20
5
13
15
6
13
15
7
10
13
8
10
13
Table 5-599 Output power for the RRU3961 (UMTS, 900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
40
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
552
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
2
40
3
20
4
20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 20
3 (MIMO)
2 x 10
4 (MIMO)
2 x 10
Table 5-600 Output power for the RRU3961 (LTE FDD, 800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
10, 20
2 (MIMO)
2 x 20
10
Table 5-601 Output power for the RRU3961 (GU non-MSR, 900 MHz)
Issue 05 (2014-08-30)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
1
1
40
40
2
1
20
40
3
1
13
40
4
1
10
40
1
2
40
20
2
2
20
20
3
2
13
20
4
2
10
20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
553
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-602 Output power for the RRU3961 (GU MSR, 900 MHz)
Mode
Total Number
of GSM
Carriers
Total Number
of UMTS
Carriers
Output Power
per GSM
Carrier (W)
Output Power
per UMTS
Carrier (W)
GSM + UMTS
3
1
20
20
4
1
13
20
5
1
10
20
6
1
10
20
1
1 (MIMO)
20
2 x 20
2
1 (MIMO)
20
2 x 20
3
1 (MIMO)
10
2 x 20
4
1 (MIMO)
10
2 x 20
1
2 (MIMO)
20
2 x 10
2
2 (MIMO)
20
2 x 10
3
2 (MIMO)
10
2 x 10
4
2 (MIMO)
10
2 x 10
Table 5-603 Output power for the RRU3961 (GL, GSM 900 MHz+LTE FDD 800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
40
2 x 20
10, 20
2
1 (MIMO)
40
2 x 20
10, 20
3
1 (MIMO)
20
2 x 20
10, 20
4
1 (MIMO)
20
2 x 20
10, 20
5
1 (MIMO)
13
2 x 20
10, 20
6
1 (MIMO)
13
2 x 20
10, 20
7
1 (MIMO)
10
2 x 20
10, 20
8
1 (MIMO)
10
2 x 20
10, 20
1
2 (MIMO)
40
2 x 10
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
554
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
2
2 (MIMO)
40
2 x 10
10
3
2 (MIMO)
20
2 x 10
10
4
2 (MIMO)
20
2 x 10
10
5
2 (MIMO)
13
2 x 10
10
6
2 (MIMO)
13
2 x 10
10
7
2 (MIMO)
10
2 x 10
10
8
2 (MIMO)
10
2 x 10
10
Table 5-604 Output power for the RRU3961 (UL, UMTS 900 MHz+LTE FDD 800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
1
1 (MIMO)
40
2 x 20
10, 20
2
1 (MIMO)
40
2 x 20
10, 20
3
1 (MIMO)
20
2 x 20
10, 20
4
1 (MIMO)
20
2 x 20
10, 20
1
2 (MIMO)
40
2 x 10
10
2
2 (MIMO)
40
2 x 10
10
3
2 (MIMO)
20
2 x 10
10
4
2 (MIMO)
20
2 x 10
10
1 (MIMO)
1 (MIMO)
2 x 40
2 x 20
10, 20
2 (MIMO)
1 (MIMO)
2 x 20
2 x 20
10, 20
3 (MIMO)
1 (MIMO)
2 x 10
2 x 20
10, 20
4 (MIMO)
1 (MIMO)
2 x 10
2 x 20
10, 20
1 (MIMO)
2 (MIMO)
2 x 40
2 x 10
10
2 (MIMO)
2 (MIMO)
2 x 20
2 x 10
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
555
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total
Number of
UMTS
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
3 (MIMO)
2 (MIMO)
2 x 10
2 x 10
10
4 (MIMO)
2 (MIMO)
2 x 10
2 x 10
10
Table 5-605 Output power for the RRU3961 (GUL, GU MSR 900 MHz+LTE FDD 800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Numbe
r of
GSM
Carriers
Total
Numbe
r of
UMTS
Carriers
Total
Numbe
r of LTE
FDD
Carriers
Output
Power
per
GSM
Carrier
(W)
Output
Power
per
UMTS
Carrier
(W)
Output
Power
per LTE
FDD
Carrier
(W)
Bandwi
dth of
LTE
FDD
Carrier
(MHz)
GSM +
UMTS +
LTE
FDD
1
1
1
(MIMO)
40
40
2 x 20
10, 20
2
1
1
(MIMO)
20
40
2 x 20
10, 20
3
1
1
(MIMO)
20
20
2 x 20
10, 20
4
1
1
(MIMO)
10
40
2 x 20
10, 20
1
2
1
(MIMO)
40
20
2 x 20
10, 20
2
2
1
(MIMO)
20
20
2 x 20
10, 20
3
2
1
(MIMO)
13
20
2 x 20
10, 20
4
2
1
(MIMO)
10
20
2 x 20
10, 20
1
1
2
(MIMO)
40
40
2 x 10
10
2
1
2
(MIMO)
20
40
2 x 10
10
3
1
2
(MIMO)
20
20
2 x 10
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
556
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Numbe
r of
GSM
Carriers
Total
Numbe
r of
UMTS
Carriers
Total
Numbe
r of LTE
FDD
Carriers
Output
Power
per
GSM
Carrier
(W)
Output
Power
per
UMTS
Carrier
(W)
Output
Power
per LTE
FDD
Carrier
(W)
Bandwi
dth of
LTE
FDD
Carrier
(MHz)
4
1
2
(MIMO)
10
40
2 x 10
10
1
2
2
(MIMO)
40
20
2 x 10
10
2
2
2
(MIMO)
20
20
2 x 10
10
3
2
2
(MIMO)
13
20
2 x 10
10
4
2
2
(MIMO)
10
20
2 x 10
10
1
1
(MIMO)
1
(MIMO)
20
2 x 20
2 x 20
10, 20
3
1
(MIMO)
1
(MIMO)
10
2 x 20
2 x 20
10, 20
2
2
(MIMO)
1
(MIMO)
20
2 x 10
2 x 20
10, 20
4
2
(MIMO)
1
(MIMO)
10
2 x 10
2 x 20
10, 20
1
1
(MIMO)
2
(MIMO)
20
2 x 20
2 x 10
10
3
1
(MIMO)
2
(MIMO)
10
2 x 20
2 x 10
10
2
2
(MIMO)
2
(MIMO)
20
2 x 10
2 x 10
10
4
2
(MIMO)
2
(MIMO)
10
2 x 10
2 x 10
10
Engineering Specifications
The following table lists the equipment specifications of an RRU3961.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
557
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-606 Equipment specifications of an RRU3961
Type
Input Power
Dimension (H x W x
D)
Weight (kg)
RRU3961
-48 V DC; voltage range:
-36 V DC to -57 V DC
l 485 mm x 380 mm x
170 mm (with the
housing)
l 25 (with the housing)
l 23.5 (without the
housing)
l 485 mm x 356 mm x
140 mm (without the
housing)
The following table lists the environmental specifications of an RRU3961.
Table 5-607 Environmental specifications of an RRU3961
Type
Operating
Temperatur
e
Relative
Humidity
Absolute
Humidity
Atmospheri
c Pressure
Storage
Time
RRU
3961
Without solar
radiation: -40°
C to +55°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to 106
kPa
It is
recommended
that the device
be installed
and used
within one
year after its
delivery
because of the
failure rate.
With solar
radiation: -40°
C to +45°C
The following table lists the compliance standards for an RRU3961.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
558
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-608 Compliance standards for an RRU3961
Type
Operating
Environment
Anti-Seismic
Performance
Protection Rating
RRU3961
l 3GPP TS 45.005
NEBS GR63 zone4
IP65
l 3GPP TS 25.141
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-609 lists the surge protection specifications of ports on an RRU3961.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-609 Surge protection specifications of ports on an RRU3961
Port
Usage
Scenario
Surge Protection Mode
Specification
Power port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Surge
current
RF port
Interconnect
ion port for
receiving RF
signals
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250 A
559
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Usage
Scenario
Surge Protection Mode
Specification
RET port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Dry contact
or RS485
alarm port
Applicable
to all
scenarios
Surge
current
Differential
mode
3 kA
Common
mode
5 kA
Local power
monitoring
port or alarm
port
Applicable
to the
scenario
where the
power
supply
module and
the RRU are
installed
back to
back or the
scenario
where the
distance
between
them is
shorter than
1m
Surge
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3961.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
560
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-610 Specifications of CPRI ports on an RRU3961
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3961
2
1.25 or 2.5
Star, chain,
or dual-star
CPRI MUX:
l GU
(dualstar/
CPRI
MUX):
40
l GU: 6
l GL: 4
l UL: 4
l GUL: 4
l In the
GL, UL,
or GUL
mode
(dualstar/
CPRI
MUX),
the
maximu
m
distances
of the
RRUs
from the
BBU
vary with
the types
of BBP in
LTE
mode as
follows
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
561
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
UBB
Pd4 is
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
– Ce
ll
qu
ant
ity
≤
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
Antenna Capability
The following table lists the antenna capability of an RRU3961.
Table 5-611 Antenna capability of an RRU3961
Issue 05 (2014-08-30)
Type
TMA Support
Supported RET Antennas
RRU3961
Supported
AISG2.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
562
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.40 RRU3232 Technical Specifications
An RRU3232, which is a remote radio unit for LTE TDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3232.
Table 5-612 Modes and frequency bands supported by an RRU3232
Type
Mode
Frequency Band
(MHz)
Frequency Range
(MHz)
RRU3232
LTE TDD
2600 (Band 38)
2570 to 2620
2600 (Band 41)
2496 to 2690
2300 (Band 40)
2300 to 2400
3500
3400 to 3700
1800
1755 to 1920
RF Specifications
Table 5-613 lists radio frequency (RF) specifications of an RRU3232.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
563
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-613 RF specifications of an RRU3232
Type
Transmit
and
Receive
Channels
Capacity
Output Power
Power
Consumption
RRU3232
4T4R
Two carriers. The
bandwidth per carrier is 5,
10, 15, or 20 MHz.
l 1800, 2300,
or 2600
MHz: The
RRU3232
supports the
maximum
power
configuratio
n 4 x 20 W.
For typical
configuratio
ns, see the
Output
power for
the
RRU3232
(LTE TDD,
1800MHz
or 2300
MHz or
2600 MHz)
table.
See the
RRU3232 sheet
in 3900 Series
Base Station
Power
Consumption
Specifications.
l 3500 MHz:
The
RRU3232
supports the
maximum
power
configuratio
n 4 x 10 W.
For typical
configuratio
ns, see the
Output
power for
the
RRU3232
(LTE TDD,
3500 MHz)
table.
For typical PA
configurations,
see Typical
Power
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
564
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Transmit
and
Receive
Channels
Capacity
Output Power
Power
Consumption
Configuration
for RRU3232 in
3900 Series
Base Station
Initial
Configuration
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-614 Output power for the RRU3232 (LTE TDD, 1800MHz or 2300 MHz or 2600 MHz)
Working mode
Total Number of
LTE TDD Carriers
Output Power per
LTE TDD Carrier
(W)
Bandwidth of LTE
TDD Carrier
(MHz)
LTE TDD
1 (MIMO)
2x20
5,10,15,20
2 (MIMO)
2x20
5,10,15,20
1 (MIMO)
4x20
5,10,15,20
2 (MIMO)
4x10
5,10,15,20
Table 5-615 Output power for the RRU3232 (LTE TDD, 3500 MHz)
Working mode
Total Number of
LTE TDD Carriers
Output Power per
LTE TDD Carrier
(W)
Bandwidth of LTE
TDD Carrier
(MHz)
LTE TDD
1 (MIMO)
2x10
5,10,15,20
2 (MIMO)
2x10
5,10,15,20
1 (MIMO)
4x10
5,10,15,20
2 (MIMO)
4x5
5,10,15,20
Engineering Specifications
The following table lists the equipment specifications of an RRU3232.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
565
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-616 Equipment specifications of an RRU3232
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3232
-48 V DC; voltage
range: -60 V DC to
-36 V DC
l 480 mm x 270 mm x 140
mm (18 L, without the
housing)
l ≤ 19.5 (without
the housing)
l 485 mm x 300 mm x 170
mm (24.7 L, with the
housing)
l ≤ 21 (with the
housing)
The following table lists the environmental specifications of an RRU3232.
Table 5-617 Environmental specifications of an RRU3232
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
32
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
The following table lists the compliance standards for an RRU3232.
Table 5-618 Compliance standards for an RRU3232
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3232
l 3GPP TS25.141
V3.0.0
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
566
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-619 lists the surge protection specifications of ports on an RRU3232.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-619 Surge protection specifications of ports on an RRU3232
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
250 A
Common
mode
250 A
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3232.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
567
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-620 Specifications of CPRI ports on an RRU3232
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3232
2
4.9
Star, chain,
or ring
4
If only one
level of
RRUs is
configured,
the
maximum
distance
between an
RRU and a
BBU is 10
km. If
multiple
levels of
RRUs are
configured,
the
maximum
distance
between an
RRU in the
lowest level
and a BBU is
20 km.
Antenna Capability
The following table lists the antenna capability of an RRU3232.
Table 5-621 Antenna capability of an RRU3232
Type
TMA Support
Supported RET Antennas
RRU3232
Not supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.41 RRU3251 Technical Specifications
An RRU3251, which is a remote radio unit for LTE TDD, supports two carriers.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
568
3900 Series Base Station
Technical Description
5 Product Specifications
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3251.
Table 5-622 Modes and frequency bands supported by an RRU3251
Type
Mode
Frequency Band
(MHz)
Frequency Range
(MHz)
RRU3251
LTE TDD
2300 (Band 40)
2300 to 2400
RF Specifications
Table 5-623 lists radio frequency (RF) specifications of an RRU3251.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
Table 5-623 RF specifications of an RRU3251
Type
Transmit
and
Receive
Channels
Capacity
Output Power
Power
Consumption
RRU3251
2T2R
Two carriers. The
bandwidth per
carrier is 10, 15, or
20 MHz.
The RRU3251
supports the
maximum power
configuration 2 x 50
W (-40°C to +45°C)
or 2 x 40 W (-40°C
to +50°C). For
typical
configurations, see
the Output power
for the RRU3251
(LTE TDD, 2300
MHz) table.
See the RRU3251
sheet in 3900 Series
Base Station Power
Consumption
Specifications3900
Series Base Station
Power
Consumption
Specifications.
For typical PA
configurations, see
Typical Power
Configuration for
RRU3251 in 3900
Series Base Station
Initial
Configuration
Guide.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
569
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-624 Output power for the RRU3251 (LTE TDD, 2300 MHz)
Working mode
Total Number of
LTE TDD Carriers
Output Power per
LTE TDD Carrier
(W)
Bandwidth of LTE
TDD Carrier
(MHz)
LTE TDD
1 (MIMO)
1 x 20
10,15,20
1 (MIMO)
1 x 40
10,15,20
2 (MIMO)
2 x 20
10,15,20
2 (MIMO)
2 x 25
10,15,20
Engineering Specifications
The following table lists the equipment specifications of an RRU3251.
Table 5-625 Equipment specifications of an RRU3251
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3251
-48 V DC; voltage
range: -60 V DC to
-34 V DC
l 400 mm x 220 mm x 140
mm (12.32 L, without the
housing)
l ≤ 13.5 (without
the housing)
l 400 mm x 249 mm x 162
mm (16.15 L, with the
housing)
l ≤ 14.5 (with the
housing)
The following table lists the environmental specifications of an RRU3251.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
570
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-626 Environmental specifications of an RRU3251
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
51
l 2 x 50 W:
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
– With solar
radiation of
1120 W/m2:
-40°C to
+45°C
– Without
solar
radiation:
-40°C to
+50°C
l 2 x 40 W:
– With solar
radiation of
1120 W/m2:
-40°C to
+50°C
– Without
solar
radiation:
-40°C to
+55°C
The following table lists the compliance standards for an RRU3251.
Table 5-627 Compliance standards for an RRU3251
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3251
l 3GPP TS25.141
V3.0.0
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-628 lists the surge protection specifications of ports on an RRU3251.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
571
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-628 Surge protection specifications of ports on an RRU3251
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
250 A
Common
mode
250 A
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3251.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
572
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-629 Specifications of CPRI ports on an RRU3251
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3251
2
4.9
Star, chain,
or ring
4
If only one
level of
RRUs is
configured,
the
maximum
distance
between an
RRU and a
BBU is 10
km. If
multiple
levels of
RRUs are
configured,
the
maximum
distance
between an
RRU in the
lowest level
and a BBU is
20 km.
Antenna Capability
The following table lists the antenna capability of an RRU3251.
Table 5-630 Antenna capability of an RRU3251
Type
TMA Support
Supported RET Antennas
RRU3251
Not supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.42 RRU3252 Technical Specifications
An RRU3252, which is a remote radio unit for LTE TDD, supports two carriers.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
573
3900 Series Base Station
Technical Description
5 Product Specifications
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3252.
Table 5-631 Modes and frequency bands supported by an RRU3252
Type
Mode
Frequency Band
(MHz)
Frequency Range
(MHz)
RRU3252 (DC)
LTE TDD
2300 (Band 40)
2300 to 2400
2500 (Band 41)
2496 to 2690
2500 (Band 38)
2570 to 2620
2300 (Band 40)
2300 to 2400
RRU3252 (AC)
RF Specifications
Table 5-632 lists radio frequency (RF) specifications of an RRU3252.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
574
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-632 RF specifications of an RRU3252
Type
Transmit
and
Receive
Channels
Capacity
Output Power
Power
Consumption
RRU3252
4T4R
Two carriers. The
bandwidth per
carrier is 5, 10,
15, or 20 MHz.
The RRU3252
supports the
maximum power
configuration 4 x 20
W. For typical
configurations, see
the Output power
for the RRU3252
(LTE TDD, 2300
MHz or 2500 MHz)
table.
See the RRU3252
sheet in 3900 Series
Base Station Power
Consumption
Specifications.
For typical PA
configurations, see
Typical Power
Configuration for
RRU3252 in 3900
Series Base Station
Initial Configuration
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-633 Output power for the RRU3252 (LTE TDD, 2300 MHz or 2500 MHz)
Working mode
Total Number of
LTE TDD Carriers
Output Power per
LTE TDD Carrier
(W)
Bandwidth of LTE
TDD Carrier
(MHz)
LTE TDD
1 (MIMO)
2x20
5,10,15,20
2 (MIMO)
2x20
5,10,15,20
1 (MIMO)
4x20
5,10,15,20
2 (MIMO)
4x10
5,10,15,20
Engineering Specifications
The following table lists the equipment specifications of an RRU3252.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
575
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-634 Equipment specifications of an RRU3252
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3252
(DC)
-48 V DC; voltage
range: -60 V DC to
-32 V DC
l 480 mm x 270 mm x 140
mm (18L, without the
housing)
l ≤ 19.5 (without
the housing)
l 485 mm x 300 mm x 170
mm (24.7L, with the
housing)
RRU3252
(AC)
AC; voltage range: 90
V AC to 290 V AC
480 mm x 270 mm x 140 mm
(18L, without the housing)
l ≤ 21 (with the
housing)
≤ 19.5 (without the
housing)
The following table lists the environmental specifications of an RRU3252.
Table 5-635 Environmental specifications of an RRU3252
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
52
l With solar
radiation of
1120 W/m2:
-40°C to +50°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +55°C
The following table lists the compliance standards for an RRU3252.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
576
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-636 Compliance standards for an RRU3252
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3252
l 3GPP TS25.141
V3.0.0
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-637 lists the surge protection specifications of ports on an RRU3252.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-637 Surge protection specifications of ports on an RRU3252
Port
Usage
Scenario
Surge Protection Mode
Specification
AC and DC
power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
250 A
Surge
current
RF port
RET port
Alarm port
Issue 05 (2014-08-30)
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
577
3900 Series Base Station
Technical Description
Port
5 Product Specifications
Usage
Scenario
Surge Protection Mode
Common
mode
Specification
250 A
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3252.
Table 5-638 Specifications of CPRI ports on an RRU3252
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3252
2
4.9
Star, chain,
or ring
4
If only one
level of
RRUs is
configured,
the
maximum
distance
between an
RRU and a
BBU is 10
km. If
multiple
levels of
RRUs are
configured,
the
maximum
distance
between an
RRU in the
lowest level
and a BBU is
20 km.
Antenna Capability
The following table lists the antenna capability of an RRU3252.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
578
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-639 Antenna capability of an RRU3252
Type
TMA Support
Supported RET Antennas
RRU3252
Not supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.43 RRU3253 Technical Specifications
An RRU3253, which is a remote radio unit for LTE TDD, supports two carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3253.
Table 5-640 Modes and frequency bands supported by an RRU3253
Type
Mode
Frequency Band
(MHz)
Frequency Range
(MHz)
RRU3253
LTE TDD
2600 (Band 38)
2575 to 2615
RF Specifications
Table 5-641 lists radio frequency (RF) specifications of an RRU3253.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
579
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-641 RF specifications of an RRU3253
Type
Transmit
and
Receive
Channels
Capacity
Output Power
Power
Consumption
RRU3253
8T8R
Two carriers. The
bandwidth per
carrier is 10 or 20
MHz.
When the uplinkdownlink subframe
configuration 2:2 is
used, the maximum
output power of the
RRU3253 is 8 x 16
W. When the
uplink-downlink
subframe
configuration 3:1 is
used, the maximum
output power of the
RRU3253 is 8 x 10
W. For typical
configurations, see
the Output power
for the RRU3253
(LTE TDD, 2600
MHz) table.
See the RRU3253
sheet in 3900 Series
Base Station Power
Consumption
Specifications.
For typical PA
configurations, see
Typical Power
Configuration for
RRU3253 in 3900
Series Base Station
Initial
Configuration
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-642 Output power for the RRU3253 (LTE TDD, 2600 MHz)
Issue 05 (2014-08-30)
Working mode
Total Number of
LTE TDD Carriers
Output Power per
LTE TDD Carrier
(W)
Bandwidth of LTE
TDD Carrier
(MHz)
LTE TDD
1 (MIMO)
8x5
10,20
2 (MIMO)
8x5
10,20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
580
3900 Series Base Station
Technical Description
5 Product Specifications
Engineering Specifications
The following table lists the equipment specifications of an RRU3253.
Table 5-643 Equipment specifications of an RRU3253
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3253
-48 V DC; voltage
range: -60 V DC to
-32 V DC
550 mm x 320 mm x 135 mm
(24L, without the housing)
≤ 25 (without the
housing)
The following table lists the environmental specifications of an RRU3253.
Table 5-644 Environmental specifications of an RRU3253
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
53
l With solar
radiation of
1120 W/m2:
-40°C to +45°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +50°C
The following table lists the compliance standards for an RRU3253.
Table 5-645 Compliance standards for an RRU3253
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3253
l 3GPP TS25.141
V3.0.0
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
581
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-646 lists the surge protection specifications of ports on an RRU3253.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-646 Surge protection specifications of ports on an RRU3253
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
250 A
Common
mode
250 A
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3253.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
582
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-647 Specifications of CPRI ports on an RRU3253
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3253
2
4.9 or 9.8
Star
N/A
10
Antenna Capability
The following table lists the antenna capability of an RRU3253.
Table 5-648 Antenna capability of an RRU3253
Type
TMA Support
Supported RET Antennas
RRU3253
Not supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.44 RRU3256 Technical Specifications
An RRU3256, which is a remote radio unit for LTE TDD, supports four carriers.
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3256.
Table 5-649 Modes and frequency bands supported by an RRU3256
Type
Mode
Frequency Band
(MHz)
Frequency Range
(MHz)
RRU3256
LTE TDD
2300 (Band 40)
2300 to 2400
2500 (Band 41)
2496 to 2690
2600 (Band 38)
2570 to 2620
3500 (Band 42/43)
3400 to 3700
RF Specifications
Table 5-650 lists radio frequency (RF) specifications of an RRU3256.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
583
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
Table 5-650 RF specifications of an RRU3256
Type
Transmit
and
Receive
Channels
Capacity
Output Power
Power
Consumption
RRU3256
4T4R
Four carriers. The
bandwidth per
carrier is 5, 10, 15,
or 20 MHz.
The RRU3256
supports the
maximum power
configuration 4 x 30
W. The typical
configurations are
as follows:
See the RRU3256
sheet in 3900 Series
Base Station Power
Consumption
Specifications.
l Output power
for the
RRU3256
(LTE TDD,
2300 MHz or
2500 MHz)
l Output power
for the
RRU3256
(LTE TDD,
3500 MHz)
For typical PA
configurations, see
Typical Power
Configuration for
RRU3256 in 3900
Series Base Station
Initial
Configuration
Guide.
NOTE
l The output power of an RRU3256 working at 3500 MHz varies with the factors such as uplink-downlink
subframe configuration, filter insertion loss, and carrier configuration (contiguous or non-contiguous
carriers). When the frequency spacing between carriers is greater than 80 MHz, the rated output power of
RF channels must be decreased.
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
584
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-651 Output power for the RRU3256 (LTE TDD, 2300 MHz or 2500 MHz)
Working mode
Total Number of
LTE TDD Carriers
Output Power per
LTE TDD Carrier
(W)
Bandwidth of LTE
TDD Carrier
(MHz)
LTE TDD
1 (MIMO)
2 x 30
5,10,15,20
2 (MIMO)
2 x 15
5,10,15,20
3 (MIMO)
2 x 10
5,10,15,20
4 (MIMO)
2 x 7.5
5,10,15,20
1 (MIMO)
4 x 30
5,10,15,20
2 (MIMO)
4 x 15
5,10,15,20
3 (MIMO)
4 x 10
5,10,15,20
4 (MIMO)
4 x 7.5
5,10,15,20
Table 5-652 Output power for the RRU3256 (LTE TDD, 3500 MHz)
Working mode
Total Number of
LTE TDD Carriers
Output Power per
LTE TDD Carrier
(W)
Bandwidth of LTE
TDD Carrier
(MHz)
LTE TDD
1 (MIMO)
2 x 15
5,10,15,20
2 (MIMO)
2 x 7.5
5,10,15,20
3 (MIMO)
2x5
5,10,15,20
4 (MIMO)
2 x 3.75
5,10,15,20
1 (MIMO)
4 x 15
5,10,15,20
2 (MIMO)
4 x 7.5
5,10,15,20
3 (MIMO)
4x5
5,10,15,20
4 (MIMO)
4 x 3.75
5,10,15,20
Engineering Specifications
The following table lists the equipment specifications of an RRU3256.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
585
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-653 Equipment specifications of an RRU3256
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3256
-48 V DC; voltage
range: -60 V DC to
-32 V DC
l 485 mm x 300 mm x 170
mm (24.7 L, with the
housing)
l ≤ 21 (with the
housing)
l 480 mm x 270 mm x 140
mm (18 L, with the
housing)
l ≤ 19.5 (without
the housing)
The following table lists the environmental specifications of an RRU3256.
Table 5-654 Environmental specifications of an RRU3256
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
56
l With solar
radiation of
1120 W/m2:
-40°C to +45°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +50°C
The following table lists the compliance standards for an RRU3256.
Table 5-655 Compliance standards for an RRU3256
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3256
l 3GPP TS25.141
V3.0.0
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
586
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-656 lists the surge protection specifications of ports on an RRU3256.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-656 Surge protection specifications of ports on an RRU3256
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
250 A
Common
mode
250 A
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3256.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
587
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-657 Specifications of CPRI ports on an RRU3256
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3256
2
4.9 or 9.8
Star, chain,
or ring
4
If only one
level of
RRUs is
configured,
the
maximum
distance
between an
RRU and a
BBU is 10
km. If
multiple
levels of
RRUs are
configured,
the
maximum
distance
between an
RRU in the
lowest level
and a BBU is
20 km.
Antenna Capability
The following table lists the antenna capability of an RRU3256.
Table 5-658 Antenna capability of an RRU3256
Type
TMA Support
Supported RET Antennas
RRU3256
Not supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.3.45 RRU3259 Technical Specifications
An RRU3259, which is a remote radio unit for LTE TDD, supports three carriers.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
588
3900 Series Base Station
Technical Description
5 Product Specifications
Supported Modes and Frequency Bands
The following table lists the modes and frequency bands supported by an RRU3259.
Table 5-659 Modes and frequency bands supported by an RRU3259
Type
Mode
Frequency Band
(MHz)
Frequency Range
(MHz)
RRU3259
LTE TDD
2600
2545 to 2625
NOTE
The occupied bandwidth (OBW) of the RRU3259 is 60 MHz.
RF Specifications
Table 5-660 lists radio frequency (RF) specifications of an RRU3259.
NOTE
l ATBR in the RX and TX Channels column indicates that this RF module has A transmit channels and B
receive channels.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
589
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-660 RF specifications of an RRU3259
Type
Transmit
and
Receive
Channels
Capacity
Output Power
Power
Consumption
RRU3259
8T8R
Three carriers. The
bandwidth per
carrier is 10 or 20
MHz.
The RRU3259
supports the
maximum power
configuration 8 x
12.5 W. For typical
configurations, see
the Output power
for the RRU3259
(LTE TDD, 2600
MHz) table.
See the RRU3259
sheet in 3900 Series
Base Station Power
Consumption
Specifications.
For typical PA
configurations, see
Typical Power
Configuration for
RRU3259 in 3900
Series Base Station
Initial
Configuration
Guide.
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-661 Output power for the RRU3259 (LTE TDD, 2600 MHz)
Working mode
Total Number of
LTE TDD Carriers
Output Power per
LTE TDD Carrier
(W)
Bandwidth of LTE
TDD Carrier
(MHz)
LTE TDD 8T8R
1 (MIMO)
8x5
10, 20
2 (MIMO)
8 x 10
10, 20
3 (MIMO)
l Carrier1:8 x 5
10, 20
l Carrier2:8 x 5
l Carrier3:8 x 2.5
Engineering Specifications
The following table lists the equipment specifications of an RRU3259.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
590
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-662 Equipment specifications of an RRU3259
Type
Input Power
Dimension (H x W x D)
Weight (kg)
RRU3259
-48 V DC; voltage
range: -60 V DC to
-32 V DC
550 mm x 320 mm x 135 mm
(24L, without the housing)
≤ 25 (without the
housing)
The following table lists the environmental specifications of an RRU3259.
Table 5-663 Environmental specifications of an RRU3259
Type
Operating
Temperature
Relative
Humidity
Absolute
Humidity
Atmosph
eric
Pressure
Storage
Time
RRU32
59
l With solar
radiation of
1120 W/m2:
-40°C to +45°C
5% RH to
100% RH
1 g/m3 to 30 g/
m3
70 kPa to
106 kPa
It is
recommen
ded that the
device be
installed
and used
within one
year after
its delivery
because of
the failure
rate.
l Without solar
radiation: -40°
C to +50°C
The following table lists the compliance standards for an RRU3259.
Table 5-664 Compliance standards for an RRU3259
Type
Operating
Environment
Anti-seismic
Performance
Protection Rating
RRU3259
l 3GPP TS25.141
V3.0.0
NEBS GR63 zone4
IP65
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
Table 5-665 lists the surge protection specifications of ports on an RRU3259.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
591
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-665 Surge protection specifications of ports on an RRU3259
Port
Usage
Scenario
Surge Protection Mode
Specification
Power
supply port
Applicable
to all
scenarios
Surge
Differential
mode
2 kV (1.2/50 μs)
Common
mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Common
mode
20 kA
Differential
mode
8 kA
Common
mode
40 kA
Differential
mode
3 kA
Common
mode
5 kA
Differential
mode
250 A
Common
mode
250 A
Surge
current
RF port
RET port
Alarm port
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Applicable
to all
scenarios
Surge
current
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an RRU3253.
Table 5-666 Specifications of CPRI ports on an RRU3259
Issue 05 (2014-08-30)
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
Topology
Cascading
Levels
Maximum
Distance
from the
BBU (km)
RRU3259
2
4.9 or 9.8
Star
N/A
10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
592
3900 Series Base Station
Technical Description
5 Product Specifications
Antenna Capability
The following table lists the antenna capability of an RRU3259.
Table 5-667 Antenna capability of an RRU3259
Type
TMA Support
Supported RET Antennas
RRU3253
Not supported
AISG2.0 and AISG1.1
NOTE
For RF moudles supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.4 Technical Specifications of AAUs
This section provides technical specifications of AAUs, including supported modes, frequency
bands, RF and antenna specifications, engineering specifications, antenna capabilities,
specifications of CPRI ports, and electrical specifications.
5.4.1 AAU3902 Technical Specifications
The AAU3902 is an active antenna unit that integrates the functions of the RF modules and
antennas.
Scenario
Table 5-668 lists the scenarios supported by an AAU3902.
NOTE
In xA+yP in the Scenario column, A stands for active, P stands for passive, x indicates the frequency band of
the active unit, and y indicates the frequency band of the passive unit. For example, 2100 A + 1710~2690 P +
790~960 P means that the frequency band of the active unit is 2100 MHz and the frequency band of the passive
unit is 1710 MHz to 2690 MHz and 790 MHz to 960 MHz.
Table 5-668 AAU3902 scenario
Scenario
Antenna Type
2100 A + 1710~2690 P + 790~960 P
AAU3902 Antenna
(Hereinafter referred to as 2.1 A)
1800 A + 1710~2690 P + 790~960 P
(Hereinafter referred to as 1.8 A)
1800 A + 2100 A + 1710~2690 P + 790~960
P
(Hereinafter referred to as 1.8 A + 2.1 A)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
593
3900 Series Base Station
Technical Description
5 Product Specifications
Antenna Specifications
The AAU3902 antenna supports the following frequency bands: 790 MHz to 960 MHz, 1710
MHz to 2690 MHz and 1725 MHz to 2170 MHz. For mechanical downtilt of these antennas,
see Table 5-669. For electrical properties of these antennas, see Table 5-670, Table 5-671, and
Table 5-672.
Table 5-669 AAU3902 antenna mechanical downtilt
Antenna Frequency Range (MHz)
Mechanical Downtilt (°)
790 to 960
-3 to 3
1710 to 2690
-3 to 3
1725 to 2170
-3 to 3
Table 5-670 AAU3902 antenna electrical properties (790MHz to 960MHz)
Item
Specifications
Frequency range
(MHz)
790 to 862
824 to 894
880 to 960
Polarization
+45°, -45°
Electrical
downtilt (°)
0 to 10, continuously adjustable
Gain (dBi)
Side lobe
suppression for
first side lobe
above main
beam (Typ.)
(dB)
Issue 05 (2014-08-30)
790 to 960 (only for passive module)
0°
5°
10°
0°
5°
10°
0°
5°
10°
15.7
15.9
15.6
16
16.1
15.6
16.1
16.3
15.8
0°
5°
10°
0°
5°
10°
0°
5°
10°
18
18
18
18
18
18
18
18
18
Horizontal 3dB
beam width (°)
65
64
62
Vertical 3dB
beam width (°)
10.1
9.8
9.3
VSWR
<1.5
Isolation
between ports
(dB)
≥28
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
594
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specifications
Front to back
ratio, copolar
(dB)
Typ.27
Cross polar ratio
(0°)(dB)
Typ.18
Max. power per
input (W)
250 (at 50°C ambient temperature)
Intermodulation
IM3 (dBc)
≤-153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Table 5-671 AAU3902 antenna electrical properties (1710MHz to 2690MHz)
Item
Specifications
Frequency range
(MHz)
1710 to 1990
1920 to 2170
2500 to 2690
Polarization
+45°, -45°
Electrical
downtilt (°)
2 to 10, continuously adjustable
Gain (dBi)
Side lobe
suppression for
first side lobe
above main
beam (Typ.)
(dB)
Issue 05 (2014-08-30)
1710 to 2690 (only for passive module)
2°
6°
10°
2°
6°
10°
2°
6°
10°
17.5
17.3
17
17.8
17.8
17.3
17.8
18.2
17.7
2°
6°
10°
2°
6°
10°
2°
6°
10°
16
16
17
17
17
17
17
18
18
Horizontal 3dB
beam width (°)
65
62
60
Vertical 3dB
beam width (°)
5.8
5.4
4.3
VSWR
<1.5
Isolation
between ports
(dB)
≥28
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
595
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specifications
Front to back
ratio, copolar
(dB)
Typ.28
Cross polar ratio
(0°)(dB)
Typ.18
Max. power per
input (W)
125 (at 50°C ambient temperature)
Intermodulation
IM3 (dBc)
≤-153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
NOTE
l In Table 5-672, *: AAU3902 supports the Dividual Tilts by Carrier feature. The tilt difference between
carriers operating in the 2100 MHz frequency band and 1800 MHz frequency band ranges from 0 to 5.5
degree.
l For details about the Dividual Tilts by Carrier feature, see AAS Feature Parameter Description of the
corresponding mode.
Table 5-672 AAU3902 antenna electrical properties (1725MHz to 2170MHz)
Item
Specifications
Frequency range
(MHz)
1725 to 2170 (only for active module)
1920 to 2170
Polarization
+45°, -45°
Electrical
downtilt (°)
0 to 12, continuously adjustable
Tilt difference
range between
carriers *(°)
0 to 5
Gain (dBi)
Side lobe
suppression for
first side lobe
above main
beam (Typ.)
(dB)
Issue 05 (2014-08-30)
1725 to 1880
0 to 6
0°
6°
12°
0°
6°
12°
16.6
17.1
16.8
16.5
17
16.5
0°
6°
12°
0°
6°
12°
18
17
16
18
18
17
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
596
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specifications
Horizontal 3dB
beam width (°)
60
64
Vertical 3dB
beam width (°)
5.7
6.4
VSWR
<1.5
Isolation
between ports
(dB)
≥28
Front to back
ratio, copolar
(dB)
Typ.28
Cross polar
ratio (dB)
0°
Typ.20
±6
0°
Typ.10
Max. power per
slot of active
antenna part (W)
2 x 60 (at 50°C ambient temperature)
Intermodulation
IM3 (dBc)
≤-153 (2 x 43 dBm carrier)
Impedance (Ω)
50
RF Specifications
The RF specifications of an AAU3902 include the following: frequency band, EIRP, capacity,
receiver sensitivity, output power, and power consumption.
Table 5-673 Frequency band of AAU3902
Issue 05 (2014-08-30)
Scenario
Frequency Band
(MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
2.1 A
2100
1920 to 1980
2110 to 2170
1.8 A
1800
1725 to 1785
1820 to 1880
1.8 A + 2.1 A
1800
1725 to 1785
1820 to 1880
2100
1920 to 1980
2110 to 2170
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
597
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-674 AAU3902 EIRP
Frequency Band (MHz)
EIRP
1800
2 x 40W + 17dBi = 2 x 63dBm
2100
2 x 40W + 17dBi = 2 x 63dBm
NOTE
In Table 5-675:
l
The GSM receiver sensitivity, as recommended in 3GPP TS 51.021, is measured at the antenna connector
on condition that the channel rate is 13 kbit/s and the Bit Error Rate (BER) is not higher than 2%.
l
The UMTS receiver sensitivity, as recommended in 3GPP TS 25.104, is measured at the antenna connector
on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l
The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz
channel bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l
Typical power consumption is measured when the base station load reaches 50% and maximum power
consumption is measured when the base station load reaches 100%.
Table 5-675 Capacity, receiver sensitivity, output power, and power consumption of AAU3902
Scena
rio
Capacity
Equivalent
Receiver
Sensitivity of
an Active
Unit
Output Power
Power
Consumption
(W)
2.1 A
UMTS:
UMTS: 125.8
dBm-17 dBi
The typical
configurations are as
follows:
l Typical power
consumption:
260
l Output power for
the AAU3902
(UMTS, 2100 MHz,
1T2R, 3 Sectors)
l Maximum
power
consumption:
360
l 8 carriers
(nonMIMO
1T2R)
l 4 carriers
(MIMO
2T2R or
2T4R)
l Output power for
the AAU3902
(UMTS, 2100 MHz,
2T2R/2T4R, 3
Sectors)
l Output power for
the AAU3902
(UMTS, 2100 MHz,
1T2R, 6 Sectors)
l Output power for
the AAU3902
(UMTS, 2100 MHz,
2T2R, 6 Sectors)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
598
3900 Series Base Station
Technical Description
5 Product Specifications
Scena
rio
Capacity
Equivalent
Receiver
Sensitivity of
an Active
Unit
Output Power
Power
Consumption
(W)
1.8 A
GSM: 6
carriers
l GSM: 114.0
dBm-17 dBi
LTE FDD: 2
carriers. The
bandwidth per
carrier is 5, 10,
15, or 20 MHz.
l LTE FDD:
-106.6
Bm-17 dBi
The typical
configurations are as
follows:
l Typical power
consumption:
275
l Output power for
the AAU3902 (LTE
FDD, 1800 MHz,
2T2R/2T4R, 3
Sectors)
l Maximum
power
consumption:
365
l Output power for
the AAU3902 (LTE
FDD, 1800 MHz,
4T4R, 3 Sectors)
l Output power for
the AAU3902 (LTE
FDD, 1800 MHz,
2T2R, 6 Sectors)
l Output power for
the AAU3902 (GL,
1800 MHz, GSM
1T2R&LTE FDD
2T2R/2T4R, 3
Sectors)
l Output power for
the AAU3902 (GL,
1800 MHz, GSM
1T2R&LTE FDD
4T4R, 3 Sectors)
l Output power for
the AAU3902 (GL,
1800 MHz, GSM
1T2R&LTE FDD
2T2R, 3 Sectors for
GSM&6 Sectors for
LTE FDD)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
599
3900 Series Base Station
Technical Description
5 Product Specifications
Scena
rio
Capacity
Equivalent
Receiver
Sensitivity of
an Active
Unit
Output Power
Power
Consumption
(W)
1.8 A
+ 2.1
A
GSM: 6
carriers
l GSM:
114.0dBm17dBi
The typical
configurations are as
follows:
l Typical power
consumption:
505
l UMTS:
125.8dBm17dBi
l Output power for
the AAU3902
(UMTS, 2100 MHz,
1T2R, 3 Sectors)
l Maximum
power
consumption:
695
UMTS:
l 8 carriers
(nonMIMO
1T2R)
l 4 carriers
(MIMO
2T2R or
2T4R)
LTE FDD: 2
carriers. The
bandwidth per
carrier is 5, 10,
15, or 20 MHz.
l LTE FDD:
-106.6dBm17dBi
l Output power for
the AAU3902
(UMTS, 2100 MHz,
2T2R/2T4R, 3
Sectors)
l Output power for
the AAU3902
(UMTS, 2100 MHz,
1T2R, 6 Sectors)
l Output power for
the AAU3902
(UMTS, 2100 MHz,
2T2R, 6 Sectors)
l Output power for
the AAU3902 (LTE
FDD, 1800 MHz,
2T2R/2T4R, 3
Sectors)
l Output power for
the AAU3902 (LTE
FDD, 1800 MHz,
4T4R, 3 Sectors)
l Output power for
the AAU3902 (LTE
FDD, 1800 MHz,
2T2R, 6 Sectors)
l Output power for
the AAU3902 (GL,
1800 MHz, GSM
1T2R&LTE FDD
2T2R/2T4R, 3
Sectors)
l Output power for
the AAU3902 (GL,
1800 MHz, GSM
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
600
3900 Series Base Station
Technical Description
Scena
rio
5 Product Specifications
Capacity
Equivalent
Receiver
Sensitivity of
an Active
Unit
Output Power
Power
Consumption
(W)
1T2R&LTE FDD
4T4R, 3 Sectors)
l Output power for
the AAU3902 (GL,
1800 MHz, GSM
1T2R&LTE FDD
2T2R, 3 Sectors for
GSM&6 Sectors for
LTE FDD)
NOTE
l The output power per carrier in the output power table provides the maximum output power possible
while ensuring the network performance.
l The Virtual Antenna Port Configuration column provides the output power configurations of virtual
antenna ports when the Dividual Tilts by Carrier feature is used.
l Rxy indicates a virtual antenna port connected to a virtual RET subunit. Where
l x is a decimal digit ranging from 0 to 7. It indicates the number of a port on the vertical plane.
l y indicates the number of a port on the horizontal plane and can be set to A or B. A indicates the +45°
polarized radiator element and B indicates the -45° polarized radiator element.
l If the Vertical Multiple Sectors feature is used, the base station supports a maximum of six sectors. If this
feature is not used, the base station supports a maximum of three sectors.
l For details about the Vertical Multiple Sectors features, see AAS Feature Parameter Description of the
corresponding mode.
Table 5-676 Output power for the AAU3902 (UMTS, 2100 MHz, 1T2R, 3 Sectors)
Mode
Total
Number of
UMTS
Carriers
Output
Power per
UMTS
Carrier (W)
Virtual Antenna Port
Configuration
UMTS
1
40
R0A: 40 W, R0B: 0 W
2
40
l R0A: 40 W, R0B: 0 W
l R1A: 0 W, R1B: 40 W
3
20
l R0A: 20 W, R0B: 0 W
l R1A: 0 W, R1B: 20 W
l R2A: 20 W, R2B: 0 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
601
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
UMTS
Carriers
Output
Power per
UMTS
Carrier (W)
Virtual Antenna Port
Configuration
4
20
l R0A: 20 W, R0B: 0 W
l R1A: 0 W, R1B: 20 W
l R2A: 20 W, R2B: 0 W
l R3A: 0 W, R3B: 20 W
5
13
l R0A: 13 W, R0B: 0 W
l R1A: 0 W, R1B: 13 W
l R2A: 13 W, R2B: 0 W
l R3A: 0 W, R3B: 13 W
l R4A: 13 W, R4B: 0 W
6
13
l R0A: 13 W, R0B: 0 W
l R1A: 0 W, R1B: 13 W
l R2A: 13 W, R2B: 0 W
l R3A: 0 W, R3B: 13 W
l R4A: 13 W, R4B: 0 W
l R5A: 0 W, R5B: 13 W
7
10
l R0A: 10 W, R0B: 0 W
l R1A: 0 W, R1B: 10 W
l R2A: 10 W, R2B: 0 W
l R3A: 0 W, R3B: 10 W
l R4A: 10 W, R4B: 0 W
l R5A: 0 W, R5B: 10 W
l R6A: 10 W, R6B: 0 W
8
10
l R0A: 10 W, R0B: 0 W
l R1A: 0 W, R1B: 10 W
l R2A: 10 W, R2B: 0 W
l R3A: 0 W, R3B: 10 W
l R4A: 10 W, R4B: 0 W
l R5A: 0 W, R5B: 10 W
l R6A: 10 W, R6B: 0 W
l R7A: 0 W, R7B: 10 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
602
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-677 Output power for the AAU3902 (UMTS, 2100 MHz, 2T2R/2T4R, 3 Sectors)
Mode
Total
Number of
UMTS
Carriers
Output
Power per
UMTS
Carrier (W)
Virtual Antenna Port
Configuration
UMTS
1
40 + 40
R0A: 40 W, R0B: 40 W
2
20 + 20
l R0A: 20 W, R0B: 20 W
l R1A: 20 W, R1B: 20 W
3
13 + 13
l R0A: 13 W, R0B: 13 W
l R1A: 13 W, R1B: 13 W
l R2A: 13 W, R2B: 13 W
4
10 + 10
l R0A: 10 W, R0B: 10 W
l R1A: 10 W, R1B: 10 W
l R2A: 10 W, R2B: 10 W
l R3A: 10 W, R3B: 10 W
Table 5-678 Output power for the AAU3902 (UMTS, 2100 MHz, 1T2R, 6 Sectors)
Mode
Total
Number of
UMTS
Carriers
Output
Power per
UMTS
Carrier (W)
Virtual Antenna Port
Configuration
UMTS
1
40
l Sector 1: R0A: 40 W, R0B: 0 W
l Sector 2: R1A: 0 W, R1B: 40 W
2
20
l Sector 1:
– Carrier 1: R0A: 20 W, R0B: 0 W
– Carrier 2: R1A: 0 W, R1B: 20 W
l Sector 2:
– Carrier 1: R2A: 20 W, R2B: 0 W
– Carrier 2: R3A: 0 W, R3B: 20 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
603
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
UMTS
Carriers
Output
Power per
UMTS
Carrier (W)
Virtual Antenna Port
Configuration
3
13
l Sector 1:
– Carrier 1: R0A: 13 W, R0B: 0 W
– Carrier 2: R1A: 0 W, R1B: 13 W
– Carrier 3: R2A: 13 W, R2B: 0 W
l Sector 2:
– Carrier 1: R3A: 0 W, R3B: 13 W
– Carrier 2: R4A: 13 W, R4B: 0 W
– Carrier 3: R5A: 0 W, R5B: 13 W
4
10
l Sector 1:
– Carrier 1: R0A: 10 W, R0B: 0 W
– Carrier 2: R1A: 0 W, R1B: 10 W
– Carrier 3: R2A: 10 W, R2B: 0 W
– Carrier 4: R3A: 0 W, R3B: 10 W
l Sector 2:
– Carrier 1: R4A: 10 W, R4B: 0 W
– Carrier 2: R5A: 0 W, R5B: 10 W
– Carrier 3: R6A: 10 W, R6B: 0 W
– Carrier 4: R7A: 0 W, R7B: 10 W
Table 5-679 Output power for the AAU3902 (UMTS, 2100 MHz, 2T2R, 6 Sectors)
Mode
Total
Number of
UMTS
Carriers
Output
Power per
UMTS
Carrier (W)
Virtual Antenna Port
Configuration
UMTS
1
20 + 20
l Sector 1: R0A: 20 W, R0B: 20 W
l Sector 2: R1A: 20 W, R1B: 20 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
604
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
UMTS
Carriers
Output
Power per
UMTS
Carrier (W)
Virtual Antenna Port
Configuration
2
10 + 10
l Sector 1:
– Carrier 1: R0A: 10 W, R0B: 10
W
– Carrier 2: R1A: 10 W, R1B: 10
W
l Sector 2:
– Carrier 1: R2A: 10 W, R2B: 10
W
– Carrier 2: R3A: 10 W, R3B: 10
W
3
6.5+6.5
l Sector 1:
– Carrier 1: R0A: 6.5 W, R0B: 6.5
W
– Carrier 2: R1A: 6.5 W, R1B: 6.5
W
– Carrier 3: R2A: 6.5 W, R2B: 6.5
W
l Sector 2:
– Carrier 1: R3A: 6.5 W, R3B: 6.5
W
– Carrier 2: R4A: 6.5 W, R4B: 6.5
W
– Carrier 3: R5A: 6.5 W, R5B: 6.5
W
4
5+5
l Sector 1:
– Carrier 1: R0A: 5 W, R0B: 5 W
– Carrier 2: R1A: 5 W, R1B: 5 W
– Carrier 3: R2A: 5 W, R2B: 5 W
– Carrier 4: R3A: 5 W, R3B: 5 W
l Sector 2:
– Carrier 1: R4A: 5 W, R4B: 5 W
– Carrier 2: R5A: 5 W, R5B: 5 W
– Carrier 3: R6A: 5 W, R6B: 5 W
– Carrier 4: R7A: 5 W, R7B: 5 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
605
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-680 Output power for the AAU3902 (LTE FDD, 1800 MHz, 2T2R/2T4R, 3 Sectors)
Mode
Total
Numbe
r of LTE
FDD
Carriers
Output
Power
per LTE
FDD
Carrier
(W)
Bandwidth of LTE
FDD Carrier (MHz)
Virtual Antenna Port
Configuration
LTE FDD
1
2 x 40
5, 10, 15, 20
R0A: 40 W, R0B: 40 W
2
2 x 20
5, 10, 15, 20
l R0A: 20 W, R0B: 20
W
l R1A: 20 W, R1B: 20
W
Table 5-681 Output power for the AAU3902 (LTE FDD, 1800 MHz, 4T4R, 3 Sectors)
Mode
Total
Numbe
r of LTE
FDD
Carriers
Output
Power
per LTE
FDD
Carrier
(W)
Bandwidth of LTE
FDD Carrier (MHz)
Virtual Antenna Port
Configuration
LTE FDD
1
4 x 20
5, 10, 15, 20
l R0A: 20 W, R0B: 20
W
l R1A: 20 W, R1B: 20
W
2
4 x 10
5, 10, 15, 20
l R0A: 10 W, R0B: 10
W
l R1A: 10 W, R1B: 10
W
l R2A: 10 W, R2B: 10
W
l R3A: 10 W, R3B: 10
W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
606
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-682 Output power for the AAU3902 (LTE FDD, 1800 MHz, 2T2R, 6 Sectors)
Mode
Total
Numbe
r of LTE
FDD
Carriers
Output
Power
per LTE
FDD
Carrier
(W)
Bandwidth of LTE
FDD Carrier (MHz)
Virtual Antenna Port
Configuration
LTE FDD
1
2 x 40
5, 10, 15, 20
l Sector 1: R0A: 40 W,
R0B: 40 W
l Sector 2: R1A: 40 W,
R1B: 40 W
2
2 x 20
5, 10, 15, 20
l Sector 1:
– Carrier 1: R0A: 20
W, R0B: 20 W
– Carrier 2: R1A: 20
W, R1B: 20 W
l Sector 2:
– Carrier 1: R2A: 20
W, R2B: 20 W
– Carrier 2: R3A: 20
W, R3B: 20 W
Table 5-683 Output power for the AAU3902 (GL, 1800 MHz, GSM 1T2R & LTE FDD 2T2R/
2T4R, 3 Sectors)
Mode
Total
Num
ber of
GSM
Carri
ers
Outp
ut
Powe
r per
GSM
Carri
er (W)
Total
Num
ber of
LTE
FDD
Carri
ers
Outp
ut
Powe
r per
LTE
FDD
Carri
er (W)
Bandwidth of
LTE FDD Carrier
(MHz)
Virtual Antenna
Port
Configuration
GL
6
10
1
2 x 10
5, 10, 15, 20
l GSM: R0A: 10
W, 10 W, 10 W;
R0B: 10 W, 10
W, 10 W
l LTE: R1A: 10
W; R1B: 10 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
607
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Num
ber of
GSM
Carri
ers
Outp
ut
Powe
r per
GSM
Carri
er (W)
Total
Num
ber of
LTE
FDD
Carri
ers
Outp
ut
Powe
r per
LTE
FDD
Carri
er (W)
Bandwidth of
LTE FDD Carrier
(MHz)
Virtual Antenna
Port
Configuration
5
10
1
2 x 10
5, 10, 15, 20
l GSM: R0A: 10
W, 10 W, 10 W;
R0B: 10 W, 10
W
l LTE: R1A: 10
W; R1B: 10 W
4
10
1
2 x 20
5, 10, 15, 20
l GSM: R0A: 10
W, 10 W; R0B:
10 W, 10 W
l LTE: R1A: 20
W; R1B: 20 W
3
10
1
2 x 20
5, 10, 15, 20
l GSM: R0A: 10
W, 10 W; R0B:
10 W
l LTE: R1A: 20
W; R1B: 20 W
2
20
1
2 x 20
5, 10, 15, 20
l GSM: R0A: 20
W; R0B: 20 W
l LTE: R1A: 20
W; R1B: 20 W
1
20
1
2 x 20
5, 10, 15, 20
l GSM: R0A: 20
W
l LTE: R1A: 20
W; R1B: 20 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
608
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-684 Output power for the AAU3902 (GL, 1800 MHz, GSM 1T2R & LTE FDD 4T4R,
3 Sectors)
Mode
Total
Num
ber of
GSM
Carri
ers
Outp
ut
Powe
r per
GSM
Carri
er (W)
Total
Num
ber of
LTE
FDD
Carri
ers
Outp
ut
Powe
r per
LTE
FDD
Carri
er (W)
Bandwidth of
LTE FDD Carrier
(MHz)
Virtual Antenna
Port
Configuration
GL
4
10
1
4 x 10
5, 10, 15, 20
l GSM: R0A: 10
W, 10 W; R0B:
10 W, 10 W
l LTE: R1A: 10
W, R1B: 10 W;
R2A: 10 W,
R2B: 10 W
3
10
1
4 x 10
5, 10, 15, 20
l GSM: R0A: 10
W, 10 W; R0B:
10 W
l LTE: R1A: 10
W, R1B: 10 W;
R2A: 10 W,
R2B: 10 W
2
20
1
4 x 10
5, 10, 15, 20
l GSM: R0A: 20
W; R0B: 20 W
l LTE: R1A: 10
W, R1B: 10 W;
R2A: 10 W,
R2B: 10 W
1
20
1
4 x 10
5, 10, 15, 20
l GSM: R0A: 20
W
l LTE: R1A: 10
W, R1B: 10 W;
R2A: 10 W,
R2B: 10 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
609
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-685 Output power for the AAU3902 (GL, 1800 MHz, GSM 1T2R & LTE FDD 2T2R,
3 Sectors for GSM & 6 Sectors for LTE FDD)
Mode
Total
Num
ber of
GSM
Carri
ers
Outp
ut
Powe
r per
GSM
Carri
er (W)
Total
Num
ber of
LTE
FDD
Carri
ers
Outp
ut
Powe
r per
LTE
FDD
Carri
er (W)
Bandwidth of
LTE FDD Carrier
(MHz)
Virtual Antenna
Port
Configuration
GL
4
10
1
2 x 10
5, 10, 15, 20
l GSM: R0A: 10
W, 10 W; R0B:
10 W, 10 W
l LTE:
– Sector 1:
R1A: 10 W,
R1B: 10 W
– Sector 2:
R2A: 10 W,
R2B: 10 W
3
10
1
2 x 10
5, 10, 15, 20
l GSM: R0A: 10
W, 10 W; R0B:
10 W
l LTE:
– Sector 1:
R1A: 10 W,
R1B: 10 W
– Sector 2:
R2A: 10 W,
R2B: 10 W
2
20
1
2 x 10
5, 10, 15, 20
l GSM: R0A: 20
W; R0B: 20 W
l LTE:
– Sector 1:
R1A: 10 W,
R1B: 10 W
– Sector 2:
R2A: 10 W,
R2B: 10 W
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
610
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Num
ber of
GSM
Carri
ers
Outp
ut
Powe
r per
GSM
Carri
er (W)
Total
Num
ber of
LTE
FDD
Carri
ers
Outp
ut
Powe
r per
LTE
FDD
Carri
er (W)
Bandwidth of
LTE FDD Carrier
(MHz)
Virtual Antenna
Port
Configuration
1
20
1
2 x 10
5, 10, 15, 20
l GSM: R0A: 20
W
l LTE:
– Sector 1:
R1A: 10 W,
R1B: 10 W
– Sector 2:
R2A: 10 W,
R2B: 10 W
Engineering Specifications
The following table lists the equipment specifications of an AAU3902.
Table 5-686 Equipment specifications of an AAU3902
Input Power
Dimensions (H x W x D)
Weight
-48 V DC; voltage range: -57
V DC to -36 V DC
l AAU3902: 2000 mm x
350 mm x 260 mm
(without the attachment
plate)
l Minimum antenna weight
(without modules and the
attachment plate): 33.5 kg
l RU44: 416 mm x 310 mm
x 132 mm
l When one RU44 is
configured (without the
handles, decorating plates
and mounting kits): 53 kg
l When two RU44s are
configured (without the
handles, decorating plates
and mounting kits): 62 kg
l RU44: 10.9 kg
The following table lists the environmental specifications of an AAU3902.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
611
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-687 Environment specifications of an AAU3902
Item
Specifications
Operating temperature
l Without solar radiation: -40ºC to +55ºC
l With solar radiation: -40ºC to +50ºC
l Front: 980 N (Assume that the wind speed
is 150 km/h.)
Wind load
l Side: 650 N (Assume that the wind speed
is 150 km/h.)
l Rear: 960 N (Assume that the wind speed
is 150 km/h.)
Max. operational wind speed
150 km/h
Survival wind speed
200 km/h
Relative humidity
5% RH to 100% RH
Absolute humidity
1 g/m3 to 30 g/m3
Operating environment
Comply with the following standards:
l 3GPP TS 25.141
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4 V2.1.2 (2003-04)
Class 4.1: "Non-weather protected
locations."
Anti-seismic protection
ETS300-2-3 4M5
Storage Time
It is recommended that the device be installed
and used within one year after its delivery
because of the failure rate.
Table 5-688 lists the surge protection specifications of ports on an AAU3902.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
612
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-688 Surge protection specifications of ports on an AAU3902
Port
Surge Protection
Mode
Specifications
Remarks
DC power
port
Surge
current
Differenti
al mode
10 kA
NOTE
Common
mode
20 kA
Differenti
al mode
2 kA
Common
mode
20 kA
Antenna
port
Surge
current
l Unless otherwise
specified, the surge
protection
specifications depend
on the surge waveform
of 8/20 μs.
l All the surge current
items, unless otherwise
specified as Maximum
discharge current,
refer to Nominal
discharge current.
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an AAU3902.
Table 5-689 Specifications of CPRI ports on an AAU3902
Number of
CPRI Ports
CPRI Data
Rate (Gbit/s)
Topology
Cascading
Levels
Maximum
Distance from
the BBU (km)
2
1.25, 2.5, 4.9, or
6.144
Star or chain
3
40
Antenna Capability
The following table lists the antenna capability of an AAU3902.
Table 5-690 Antenna capability of an AAU3902
TMA Support
Supported RET Antennas
Passive antennas connected to a TMA
AISG2.0
NOTE
For AAUs supporting RET antennas, the feeding voltage is 12 V and feeding current is 2.3 A.
5.4.2 AAU3910 Technical Specifications
The AAU3910 is an active antenna unit that integrates the functions of RF modules and antennas.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
613
3900 Series Base Station
Technical Description
5 Product Specifications
Scenario
Table 5-691 lists the scenarios supported by an AAU3910.
NOTE
In xA+yP in the Scenario column, A stands for active, P stands for passive, x indicates the frequency band of
the active unit, and y indicates the frequency band of the passive unit. For example, 2.1 A + 1.8 P means that
the frequency band of the active unit is 2100 MHz and the frequency band of the passive unit is 1800 MHz.
Table 5-691 AAU3910 scenario
Scenario
Antenna Type
2.1A+1.8P/2.6P
AAU3910-2.1A Antenna
2.1A+1.8A
2.1A+2.6A+1.8P
2.6A+1.8P/2.1P/PCS P
AAU3910-2.6A Antenna
2.6A+2.1A
2.6A+1.8A
1.8A+2.1P/2.6P
AAU3910-1.8A Antenna
AWS A+PCS P
AAU3910-AWS A Antenna
Antenna Specifications
AAU3910-2.1A, AAU3910-2.6A, and AAU3910-1.8A have two built-in antennas. Table
5-692 lists their corresponding electrical specifications.
Table 5-692 AAU3910-2.1A/2.6A/1.8A antenna electrical properties
Item
Specifications
Frequency range
(MHz)
2 x (1710 to 2690)
1710 to 1880
1920 to 2170
Polarization
+45°, -45°
Electrical downtilt
(°)
Gain (dBi)
Side lobe
suppression for
first side lobe
Issue 05 (2014-08-30)
2500 to 2690
0 to 12, continuously adjustable
0°
6°
12°
0°
6°
12°
0°
6°
12°
17.1
17.3
17.0
17.7
17.9
17.5
18.2
18.2
17.8
0°
6°
12°
0°
6°
12°
0°
6°
12°
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
614
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specifications
above main beam
(Typ.)(dB)
18
17
16
18
17
16
18
17
Horizontal 3dB
beam width (°)
66
64
60
Vertical 3dB beam
width (°)
6.5
6
4.5
VSWR
16
<1.5
Isolation between
ports (dB)
Intra-system: ≥30
Inter-system: ≥28 (Typ.30)
Front to back ratio,
copolar (dB)
Typ.28
Cross polar
ratio (dB)
0°
Typ.20
±6
0°
Typ.10
Max. power per
input (W)
240 (at 50°C ambient temperature)
Intermodulation
IM3 (dBc)
≤-153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
AAU3910-AWS+PCS has two built-in antennas. Table 5-693 lists the corresponding electrical
specifications.
Table 5-693 AAU3910-AWS+PCS antenna electrical properties
Item
Specifications
Frequency range
(MHz)
2 x (1710 to 2170)
AWS
AWS
PCS
1710 to 1770
2110 to 2170
1850 to 1995
Polarization
+45°, -45°
Electrical downtilt
(°)
Gain (dBi)
Issue 05 (2014-08-30)
0 to 12, continuously adjustable
0°
6°
12°
0°
6°
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
12°
0°
6°
12°
615
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specifications
Side lobe
suppression for
first side lobe
above main beam
(Typ.)(dB)
17.1
17.4
17.1
17.8
18.1
17.9
17.4
17.8
17.4
0°
6°
12°
0°
6°
12°
0°
6°
12°
18
17
16
18
17
16
18
17
16
Horizontal 3dB
beam width (°)
66
61
62
Vertical 3dB beam
width (°)
6.5
5.6
6.1
VSWR
<1.5
Isolation between
ports (dB)
Intra-system: ≥30
Inter-system: ≥28 (Typ.30)
Front to back ratio,
copolar (dB)
Typ.28
Cross polar
ratio (dB)
0°
Typ.20
±6
0°
Typ.10
Max. power per
input (W)
240 (at 50°C ambient temperature)
Intermodulation
IM3 (dBc)
≤-153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
RF Specifications
The RF specifications of an AAU3910 include the following: frequency band, EIRP, capacity,
receiver sensitivity, output power, and power consumption.
Table 5-694 Frequency band of AAU3910
Issue 05 (2014-08-30)
Scenario
Frequency Band
(MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
2.1A+1.8P/2.6P
2100
1920 to 1980
2110 to 2170
2.1A+1.8A
2100
1920 to 1980
2110 to 2170
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
616
3900 Series Base Station
Technical Description
5 Product Specifications
Scenario
Frequency Band
(MHz)
RX Frequency
Band (MHz)
TX Frequency
Band (MHz)
1800
1710 to 1785
1805 to 1880
2100
1920 to 1980
2110 to 2170
2600
2500 to 2570
2620 to 2690
2.6A+1.8P/2.1P/
PCS P
2600
2500 to 2570
2620 to 2690
2.6A+2.1A
2600
2500 to 2570
2620 to 2690
2100
1920 to 1980
2110 to 2170
2600
2500 to 2570
2620 to 2690
1800
1710 to 1785
1805 to 1880
1.8A+2.1P/2.6P
1800
1710 to 1785
1805 to 1880
AWS A+PCS P
AWS
1710 to 1755
2110 to 2155
2.1A+2.6A+1.8P
2.6A+1.8A
Table 5-695 AAU3910 EIRP
Issue 05 (2014-08-30)
Frequency Band (MHz)
EIRP
2100
2 x 60W + 17.5dBi = 2 x 65.3dBm
1800
2 x 40W + 17.5dBi = 2 x 63.5dBm
2600
2 x 40W + 18dBi = 2 x 64dBm
AWS
2 x 60W + 17.5dBi = 2 x 65.3dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
617
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l The GSM receiver sensitivity, as recommended in 3GPP TS 51.021, is measured at the antenna connector
on condition that the channel rate is 13 kbit/s and the Bit Error Rate (BER) is not higher than 2%.
l The UMTS receiver sensitivity, as recommended in 3GPP TS 25.104, is measured at the antenna connector
on condition that the channel rate reaches 12.2 kbit/s and the BER does not exceed 0.001.
l The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz channel
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
l An AAU3910 working in GSM complies with the EN 301 502 V9.2.1 standard.
l An AAU3910 working in UMTS, LTE FDD, and multi-standard radio (MSR) scenarios complies with the
ETSI EN 301 908 V5.2.1 and 3GPP TS 37.104 standards.
l If the RF module is placed at an altitude of 3500 to 4500 meters, its power reduces by 1 dB. If the RF module
is placed at an altitude of 4500 to 6000 meters, its power reduces by 2 dB.
l C x D W in the Output Power column indicates that this RF module is configured with C transmit channels
and the maximum output power of each transmit channel is D W.
l Maximum Power Consumption in the following table is the power consumed when the AAU3910 works
with full load. This value does not include the power consumption of external RF modules connected to the
AAU3910.
Table 5-696 Capacity, receiver sensitivity, output power, and power consumption of AAU3910
Issue 05 (2014-08-30)
Scen
ario
TX/
RX
Cha
nne
l
Capacity
Equivalent
Receiver
Sensitivity
of an Active
Unit
Output Power
Maximum
Power
Consumption
(W)
2.1A
+1.8P
/2.6P
2T4
R
UMTS: six
carriers
without
MIMO or
four carriers
with MIMO
UMTS:
-126.1dBm-1
7.5dBi
The typical
configurations are as
follows:
Output power for the
AAU3910 (UMTS,
2100MHz)
385
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
618
3900 Series Base Station
Technical Description
5 Product Specifications
Scen
ario
TX/
RX
Cha
nne
l
Capacity
2.1A
+1.8
A
l 2 l GSM
.
(1800MH
1
z): eight
A
TRXs
: l LTE FDD
2
(1800MH
T
z): two
4
carriers
R
with
l 1
bandwidt
.
h of
8
1.4/3/5/10
A
/15/20
:
MHz
2 l UMTS
T
(2100MH
2
z): six
R
carriers
Equivalent
Receiver
Sensitivity
of an Active
Unit
Output Power
Maximum
Power
Consumption
(W)
l GSM
(1800
MHz):
-113.5dB
m-17.5dB
i
The typical
configurations are as
follows:
385 + 320
l LTE FDD
(1800
MHz):
-106.5dB
m-17.5dB
i
l Output power for
the AAU3910
(LTE FDD,
1800MHz)
l UMTS
(2100
MHz):
-126.1dB
m-17.5dB
i
l Output power for
the AAU3910
(GSM, 1800MHz)
l Output power for
the AAU3910 (GL
MSR, 1800MHz)
l Output power for
the AAU3910
(UMTS,
2100MHz)
without
MIMO or
four
carriers
with
MIMO
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
619
3900 Series Base Station
Technical Description
5 Product Specifications
Scen
ario
TX/
RX
Cha
nne
l
Capacity
2.1A
+2.6
A
+1.8P
l 2 l UMTS
.
(2100MH
1
z): six
A
carriers
:
without
2
MIMO or
T
four
4
carriers
R
with
MIMO
l 2
. l LTE FDD
6
(2600MH
A
z): two
:
carriers
2
with
T
bandwidt
2
h of
R
5/10/15/2
/
0 MHz
2
T
4
R
2.6A
+1.8P
/2.1P/
PCS
P
Issue 05 (2014-08-30)
2T2
R/
2T4
R
LTE FDD:
two carriers
with
bandwidth of
5/10/15/20
MHz
Equivalent
Receiver
Sensitivity
of an Active
Unit
Output Power
Maximum
Power
Consumption
(W)
l UMTS
(2100
MHz):
-126.1dB
m-17.5dB
i
The typical
configurations are as
follows:
385 + 330
l LTE FDD
(2600
MHz):
-106.5dB
m-18dBi
l LTE FDD:
-106.5dB
m-18dBi
l Output power for
the AAU3910
(UMTS,
2100MHz)
l Output power for
the AAU3910
(LTE FDD,
2600MHz)
The typical
configurations are as
follows:
Output power for the
AAU3910 (LTE FDD,
2600MHz)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
330
620
3900 Series Base Station
Technical Description
Issue 05 (2014-08-30)
5 Product Specifications
Scen
ario
TX/
RX
Cha
nne
l
Capacity
2.6A
+2.1
A
l 2 l LTE FDD
.
(2600MH
6
z): two
A
carriers
:
with
2
bandwidt
T
h of
2
5/10/15/2
R
0 MHz
/ l UMTS
2
(2100MH
T
z): six
4
carriers
R
without
l 2
MIMO or
.
four
1
carriers
A
with
:
MIMO
2
T
4
R
Equivalent
Receiver
Sensitivity
of an Active
Unit
Output Power
Maximum
Power
Consumption
(W)
l LTE FDD
(2600
MHz):
-106.5dB
m-18dBi
The typical
configurations are as
follows:
330 + 385
l UMTS
(2100
MHz):
-126.1dB
m-17.5dB
i
l Output power for
the AAU3910
(LTE FDD,
2600MHz)
l Output power for
the AAU3910
(UMTS,
2100MHz)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
621
3900 Series Base Station
Technical Description
Scen
ario
TX/
RX
Cha
nne
l
2.6A
+1.8
A
l 2 l LTE FDD
.
(2600MH
6
z): two
A
carriers
:
with
2
bandwidt
T
h of
2
5/10/15/2
R
0 MHz
/ l GSM
2
(1800MH
T
z): eight
4
TRXs
R
l LTE FDD
l 1
(1800MH
.
z): two
8
carriers
A
with
:
bandwidt
2
h of
T
1.4/3/5/10
2
/15/20
R
MHz
1.8A
+2.1P
/2.6P
Issue 05 (2014-08-30)
5 Product Specifications
2T2
R
Capacity
Equivalent
Receiver
Sensitivity
of an Active
Unit
Output Power
Maximum
Power
Consumption
(W)
l LTE FDD
(2600
MHz):
-106.5dB
m-18dBi
The typical
configurations are as
follows:
330 + 320
l GSM
(1800
MHz):
-113.5dB
m-17.5dB
i
l LTE FDD
(1800
MHz):
-106.5dB
m-17.5dB
i
l Output power for
the AAU3910
(LTE FDD,
2600MHz)
l Output power for
the AAU3910
(GSM, 1800MHz)
l Output power for
the AAU3910
(LTE FDD,
1800MHz)
l Output power for
the AAU3910 (GL
MSR, 1800MHz)
l GSM:
eight
TRXs
l GSM: –
113.5dBm
-17.5dBi
The typical
configurations are as
follows:
l LTE
FDD: two
carriers
with
bandwidt
h of
1.4/3/5/10
/15/20
MHz
l LTE FDD:
-106.5dB
m-17.5dB
i
l Output power for
the AAU3910
(GSM, 1800MHz)
320
l Output power for
the AAU3910
(LTE FDD,
1800MHz)
l Output power for
the AAU3910 (GL
MSR, 1800MHz)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
622
3900 Series Base Station
Technical Description
5 Product Specifications
Scen
ario
TX/
RX
Cha
nne
l
Capacity
Equivalent
Receiver
Sensitivity
of an Active
Unit
Output Power
Maximum
Power
Consumption
(W)
AWS
A
+PCS
P
2T4
R
l UMTS:
six
carriers
without
MIMO or
four
carriers
with
MIMO
l UMTS:
-126.1dB
m-17.5dB
i
The typical
configurations are as
follows:
385
l LTE FDD:
-106.5dB
m-17.5dB
i
l LTE
FDD: two
carriers
with
bandwidt
h of
5/10/15/2
0 MHz
l Output power for
the AAU3910
(LTE FDD, AWS)
l Output power for
the AAU3910 (UL,
AWS)
NOTE
The output power per carrier in the output power table provides the maximum output power possible while
ensuring the network performance.
Table 5-697 Output power for the AAU3910 (UMTS, 2100 MHz)
Issue 05 (2014-08-30)
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
UMTS
1
60
2
Configured in one PA: 30
2
Configured in two PAs: 60
3
20
4
Configured in one PA: 15
4
Configured in two PAs: 30
6
Configured in two PAs: 20
1 (MIMO)
2 x 40
2 (MIMO)
2 x 30
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
623
3900 Series Base Station
Technical Description
5 Product Specifications
Mode
Total Number of UMTS
Carriers
Output Power per UMTS
Carrier (W)
3 (MIMO)
2 x 20
4 (MIMO)
2 x 15
Table 5-698 Output power for the AAU3910 (LTE FDD, AWS)
Mode
Total Number of
LTE FDD
Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 20
5
1 (MIMO)
2 x 40
10
1 (MIMO)
2 x 60
5, 10, 15, 20
2 (MIMO)
2 x 20
5, 10, 15, 20
2 (MIMO)
2 x 30
5, 10, 15, 20
2 (MIMO)
l Carrier 1: 2 x 20
l Carrier 1: 5, 10
l Carrier 2: 2 x 40
l Carrier 2: 10, 20
l Carrier 1: 2 x 15
l Carrier 1: 5
l Carrier 2: 2 x 45
l Carrier 2: 15
2 (MIMO)
Table 5-699 Output power for the AAU3910 (UL, AWS)
Issue 05 (2014-08-30)
Mode
Total
Number of
UMTS
Carriers
Total
Number
of LTE
FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
UMTS +
LTE FDD
1 (MIMO)
1 (MIMO)
2 x 20
2 x 40
5, 10, 15, 20
1 (MIMO)
1 (MIMO)
2 x 30
2 x 30
5, 10, 15, 20
1 (MIMO)
1 (MIMO)
2 x 40
2 x 20
5, 10, 15, 20
1
1 (MIMO)
20
2 x 40
5, 10, 15, 20
1
1 (MIMO)
30
2 x 30
5, 10, 15, 20
1
1 (MIMO)
40
2 x 20
5, 10, 15, 20
2
1 (MIMO)
Configured in
two PAs: 20
2 x 40
5, 10, 15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
624
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
UMTS
Carriers
Total
Number
of LTE
FDD
Carriers
Output
Power per
UMTS
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
2
1 (MIMO)
Configured in
two PAs: 30
2 x 30
5, 10, 15, 20
2
1 (MIMO)
Configured in
two PAs: 40
2 x 20
5, 10, 15, 20
3
1 (MIMO)
Configured in
two PAs: 20
2 x 20
5, 10, 15, 20
4
1 (MIMO)
Configured in
two PAs: 20
2 x 20
5, 10, 15, 20
1+1
(MIMO)
1 (MIMO)
Configured in
two PAs: 20
2 x 20
5, 10, 15, 20
Table 5-700 Output power for the AAU3910 (LTE FDD, 2600 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
5, 10, 15, 20
2 (MIMO)
2 x 20
5, 10, 15, 20
2 (MIMO)
l Carrier 1: 2 x 13
l Carrier 1: 5, 10
l Carrier 2: 2 x 27
l Carrier 2: 10, 20
l Carrier 1: 2 x 10
l Carrier 1: 5
l Carrier 2: 2 x 30
l Carrier 2: 15
l Carrier 1: 2 x 8
l Carrier 1: 5
l Carrier 2: 2 x 32
l Carrier 2: 20
l Carrier 1: 2 x 16
l Carrier 1: 10
l Carrier 2: 2 x 24
l Carrier 2: 15
l Carrier 1: 2 x 17
l Carrier 1: 15
l Carrier 2: 2 x 23
l Carrier 2: 20
2 (MIMO)
2 (MIMO)
2 (MIMO)
2 (MIMO)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
625
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-701 Output power for the AAU3910 (GSM, 1800 MHz)
Mode
Total Number of
GSM Carriers
Output Power per
GSM Carrier (W)
Output Power per
GSM Carrier With
Dynamic Power
Sharing (W)
GSM
1
40
40
2
40
40
3
20
20
4
20
20
5
13
15
6
13
15
7
10
13
8
10
13
Table 5-702 Output power for the AAU3910 (LTE FDD, 1800 MHz)
Mode
Total Number of
LTE FDD Carriers
Output Power per
LTE FDD Carrier
(W)
Bandwidth of LTE
FDD Carrier
(MHz)
LTE FDD
1 (MIMO)
2 x 40
1.4, 3, 5, 10, 15, 20
2 (MIMO)
2 x 20
1.4, 3, 5, 10, 15, 20
Table 5-703 Output power for the AAU3910 (GL MSR, 1800 MHz)
Issue 05 (2014-08-30)
Mode
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
GSM + LTE
FDD
1
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
2
1 (MIMO)
20
2 x 20
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
10
2 x 20
1.4, 3, 5, 10,
15, 20
3
1 (MIMO)
15
2 x 10
1.4, 3, 5, 10,
15, 20
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
626
3900 Series Base Station
Technical Description
Mode
5 Product Specifications
Total
Number of
GSM
Carriers
Total
Number of
LTE FDD
Carriers
Output
Power per
GSM
Carrier (W)
Output
Power per
LTE FDD
Carrier (W)
Bandwidth
of LTE
FDD
Carrier
(MHz)
4
1 (MIMO)
10
2 x 20
1.4, 3, 5, 10,
15, 20
4
1 (MIMO)
15
2 x 10
1.4, 3, 5, 10,
15, 20
5
1 (MIMO)
10
2 x 10
1.4, 3, 5, 10,
15, 20
6
1 (MIMO)
10
2 x 10
1.4, 3, 5, 10,
15, 20
Engineering Specifications
The following table lists the equipment specifications of an AAU3910.
Table 5-704 Equipment Specifications of an AAU3910
Type
Power Supply
Dimensions (H x W x
D)
Weight (kg)
AAU3910
-48 V DC; voltage
range: -36 V DC to -57
V DC
l 1,450 mm x 320 mm
x 220 mm (without
the shell)
l Main module: 39.5
l 1,450 mm x 320 mm
x 230 mm (with the
shell)
l Mounting kits: 6.08
l Upper and lower
handles: 3.12
The following table lists the environmental specifications of an AAU3910.
Table 5-705 Environmental specifications of an AAU3910
Item
Specification
Operating Temperature
l Without solar radiation: -40°C to + 55°C
l With solar radiation: -40°C to + 50°C
l Front: 660 N (Assume that the wind speed is 150 km/h.)
Wind load
l Side: 420 N (Assume that the wind speed is 150 km/h.)
l Rear: 710 N (Assume that the wind speed is 150 km/h.)
Max. operational wind speed
Issue 05 (2014-08-30)
150 km/h
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
627
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specification
Survival wind speed
200 km/h
Relative Humidity
5% RH to 100% RH
Absolute Humidity
1 g/m3 to 30 g/m3
Air Pressure
70 kPa to 106 kPa
Storage Time
It is recommended that the device be installed and used within
one year after its delivery because of the failure rate.
The following table lists the compliance standards for an AAU3910.
Table 5-706 Compliance standards for an AAU3910
Type
Operating
Environment
Anti-Seismic
Protection
Protection Rating
AAU3910
l 3GPP TS 45.005
l ETS300-2-3 4M5
IP55
l 3GPP TS 25.141
l YD5083 from the
Ministry of Posts and
Telecommunications
l 3GPP TS 36.141
l 3GPP TS 37.141
l ETSI EN 300019-1-4
V2.1.2 (2003-04)
Class 4.1: "Nonweatherprotected
locations"
The following table lists the surge protection specifications of ports on an AAU3910.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-707 Surge protection specifications of ports on an AAU3910
Port
Surge Protection Mode
Surge Protection Specifications
Power supply
port on the RU
Surge
Differential
mode
2 kV (1.2/50 μs)
Common mode
4 kV (1.2/50 μs)
Differential
mode
10 kA
Surge current
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
628
3900 Series Base Station
Technical Description
Port
Alarm port on
the RU
RF port on the
AU
AISG port on
the AU
5 Product Specifications
Surge Protection Mode
Surge current
Surge current
Surge current
Surge Protection Specifications
Common mode
20 kA
Differential
mode
3 kA
Common mode
5 kA
Differential
mode
5 kA
Common mode
40 kA
Differential
mode
3 kA
Common mode
5 kA
Specifications of CPRI Ports
The following table lists the specifications of CPRI ports on an AAU3910.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
629
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-708 Specifications of CPRI ports on an AAU3910
Type
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
CPRIbased
Topology
Cascading
Level
Maximum
Distance
from the
BBU (km)
AAU3910
2
1.25/2.5/4.9
Star
N/A
l UMTS:
40
l LTE
FDD:
– When
the
LBBP
c,
LBBP
d1, or
UBB
Pd3 is
config
ured:
20
– When
the
LBBP
d2 or
UBB
Pd4 is
config
ured:
40
– When
the
LBBP
d3 ,
UBB
Pd5,
or
UBB
Pd6 is
config
ured:
– Ce
ll
qu
ant
ity
≤
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
630
3900 Series Base Station
Technical Description
Type
5 Product Specifications
Number of
CPRI Ports
CPRI Data
Rate (Gbit/
s)
CPRIbased
Topology
Cascading
Level
Maximum
Distance
from the
BBU (km)
3:
40
– Ce
ll
qu
ant
ity
≥
4:
20
l UL: 40
Antenna Capability
The following table lists the antenna capability of an AAU3910.
Table 5-709 Antenna capability of an AAU3910
Type
TMA Support
RET Antenna Support
AAU3910
Supported by passive
antennas
AISG2.0
5.5 Engineering Specifications of Cabinets
This section describes engineering specifications of each type of cabinet, including input power
specifications, equipment specifications, environment specifications, surge protection
specifications, and standards that have been complied with.
5.5.1 BTS3900 Engineering Specifications
BTS3900 engineering specifications include input power specifications, equipment
specifications, environment specifications, surge protection specifications, and standards that
have been complied with.
Input Power Specifications
The BTS3900 (Ver.B), BTS3900 (Ver.C), and BTS3900 (Ver.D) cabinets have different power
input specifications. Table 5-710, Table 5-711, and Table 5-712 describe the power input
specifications for the BTS3900 (Ver.B) cabinet, BTS3900 (Ver.C) cabinet, and BTS3900
(Ver.D) cabinet, respectively.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
631
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-710 Input power supported by the BTS3900 (Ver.B) cabinet
Input Power
Voltage Range
-48 V DC
-38.4 V DC to -57 V DC
+24 V DC
+21.6 V DC to +29 V DC
120/208 V AC to 127/220 V AC dual-livewire
105/176 V AC to 150/260 V AC
100/200 V AC to 120/240 V AC dual-livewire
90/180 V AC to 135/270 V AC
200 V AC to 240 V AC single-phase
176 V AC to 290 V AC
200/346 V AC to 240/415 V AC three-phase
176/304 V AC to 290/500 V AC
Table 5-711 Input power supported by the BTS3900 (Ver.C) cabinet
Input Power
Voltage Range
-48 V DC
-38.4 V DC to -57 V DC
120/208 V AC to 127/220 V AC dual-livewire
105/176 V AC to 150/260 V AC
100/200 V AC to 120/240 V AC dual-livewire
90/180 V AC to 135/270 V AC
200 V AC to 240 V AC single-phase
176 V AC to 290 V AC
200/346 V AC to 240/415 V AC three-phase
176/304 V AC to 290/500 V AC
Table 5-712 Input power supported by the BTS3900 (Ver.D) cabinet
Input Power
Voltage Range
-48 V DC
-38.4 V DC to -57 V DC
200 V AC to 240 V AC single-phase
176 V AC to 290 V AC
200/346 V AC to 240/415 V AC three-phase
176/304 V AC to 290/500 V AC
Equipment Specifications
The following table lists the size and weight of BTS3900 (Ver.B), BTS3900 (Ver.C), and
BTS3900 (Ver.D) cabinets.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
632
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-713 Equipment specifications of BTS3900 (Ver.B), BTS3900 (Ver.C), and BTS3900
(Ver.D) cabinets
Cabinet
Dimensions (H x W x D)
Weight
BTS3900 (Ver.B)/BTS3900
(Ver.C)
900 mm x 600 mm x 450 mm
≤ 135 kg (including 1 BBU
and 6 RFUs and excluding
the transmission equipment)
BTS3900 (Ver.D) cabinet
l DC: 900 mm x 600 mm x
450 mm
l DC: ≤ 135 kg (including
1 BBU and 6 RFUs and
excluding the AC power
supply)
l AC: 1250 mm x 600 mm
x 450 mm (including the
IMS06; base: 40 mm x
600 mm x 420 mm)
l AC: ≤ 180 kg (including
1 BBU, 6 RFUs, and the
AC power supply)
Environment Specifications
The BTS3900 (Ver.B), BTS3900 (Ver.C), and BTS3900 (Ver.D) cabinets have the same
environment specifications, as provided in the following table.
Table 5-714 Environment specifications of the BTS3900 (Ver.B), BTS3900 (Ver.C), and
BTS3900 (Ver.D) cabinets
Item
Specification
Operating temperature
-20°C to +55°C
Short term: +50°C to +55°C
NOTE
Short term indicates that a base station does not
work for over 15 days within a year or that a base
station does not continuously work for over 72
hours.
Relative humidity
5% RH to 95% RH
Atmospheric pressure
70 kPa to 106 kPa
Noise Sound Power Level
ETS300 753 3.1
≤7.2bels
Storage Time
It is recommended that the device be installed
and used within one year after its delivery
because of the failure rate.
Surge Protection Specifications
The BTS3900 (Ver.B), BTS3900 (Ver.C), and BTS3900 (Ver.D) cabinets have the same surge
protection specifications, as provided in Table 5-715.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
633
3900 Series Base Station
Technical Description
5 Product Specifications
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-715 Surge protection specifications of ports on the BTS3900 (Ver.B), BTS3900
(Ver.C), and BTS3900 (Ver.D) cabinets
Port
Surge Protection
Mode
Specification
DC power supply port
Differential mode
2 kV (1.2/50 μs)
Common mode
4 kV (1.2/50 μs)
Differential mode
5 kA
Common mode
5 kA
AC power supply port
Standards
The BTS3900 (Ver.B), BTS3900 (Ver.C), and BTS3900 (Ver.D) cabinets comply with the same
standards, as provided in the following table.
Table 5-716 Standards with which the BTS3900 (Ver.B), BTS3900 (Ver.C), and BTS3900
(Ver.D) cabinets comply
Item
Standard
Security standards
l X.509: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0
and later versions
l RFC 1825: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 1826: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 1827: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 4492: Supported in all versions
l RFC 5246: Supported in GBSS15.0/RAN15.0/eRAN6.0/
SRAN8.0 and later versions
l Secure Socket Layer (SSL): Supported in all versions
Issue 05 (2014-08-30)
Protection rating
IP20
Operating
environment
ETS 300 019-1-3 Class 3.1
Storage
ETSI EN300019-1-1 V2.1.4 (2003-04) class1.2 "Weatherprotected,
not temperature-controlled storage locations"
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
634
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
Transportation
ETSI EN300019-1-2 V2.1.4 (2003-04) class 2.3 "Public
transportation"
Anti-seismic
performance
IEC 60068-2-57: Environmental testing -Part 2-57: Tests -Test Ff:
Vibration -Time-history method
YD5083: Interim Provisions for Test of Anti-seismic Performances
of Telecommunications Equipment (telecom industry standard in
People's Republic of China)
Anti-earthquake
performance
Issue 05 (2014-08-30)
ETSI EN 300019-1-3: "Earthquake"
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
635
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
EMC
NOTE
The BTS3900 complies with the following standards. If interference exists
because the BTS3900 is installed near antennas or other radio receive
devices, you are advised to extend the distance between them or adjust the
location and direction of antennas.
The multi-mode base station meets the Electromagnetic
Compatibility (EMC) requirements and complies with the following
standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8/23
l 3GPP TS 25.113
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The GBTS meets the EMC requirements and complies with the
following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The NodeB has been certified by European standards. The NodeB
meets the EMC requirements and complies with the following
standards:
l CISPR 22 (1997)
l EN 55022 (1998)
l EN 301 489-23 V1.2.1 (2002-11)
l CISPR 24 (1998)
l IEC 61000-4-2
l IEC 61000-4-3
l IEC 61000-4-4
l IEC 61000-4-5
l IEC 61000-4-6
l IEC 61000-4-29
l GB 9254-1998
l ETSI 301 489-1 V1.3.1 (2001-09)
l FCC Part 15
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
636
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
The eNodeB has been certified by European standards. The eNodeB
meets the EMC requirements and complies with the following
standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l 3GPP TS 36.113
l ETSI EN 301489-1/23
l ETSI EN 301908-1 V2.2.1 (2003-10)
l ITU-R SM.329-10
5.5.2 BTS3900L Engineering Specifications
BTS3900L engineering specifications include input power specifications, equipment
specifications, environment specifications, surge protection specifications, and standards that
have been complied with.
Input Power Specifications
The BTS3900L (Ver.B) and BTS3900L (Ver.C) cabinets support the same power input, as
provided in Table 5-717. Table 5-718 lists the input power specifications of the BTS3900L
(Ver.D) cabinets.
Table 5-717 Input power supported by the BTS3900L (Ver.B), BTS3900L (Ver.C), and
BTS3900L (Ver.D) cabinets
Input Power
Voltage Range
-48 V DC
-38.4 V DC to -57 V DC
Table 5-718 Input power supported by the BTS3900L (Ver.D) cabinets
Issue 05 (2014-08-30)
Input Power
Voltage Range
-48 V DC
-38.4 V DC to -57 V DC
200 V AC to 240 V AC single-phase
176 V AC to 290 V AC
200/346 V AC to 240/415 V AC three-phase
176/304 V AC to 290/500 V AC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
637
3900 Series Base Station
Technical Description
5 Product Specifications
Equipment Specifications
The BTS3900L (Ver.B) and BTS3900L (Ver.C) cabinets have the same size and weight. Table
5-719 lists the equipment specifications of BTS3900L (Ver.B) or BTS3900L (Ver.C) cabinets.
Table 5-720 lists the equipment specifications of a BTS3900L (Ver.D) cabinet.
Table 5-719 Equipment specifications of BTS3900L (Ver.B) or BTS3900L (Ver.C) cabinets
Item
Specifications
Dimensions (H x W x D)
1600 mm x 600 mm x 450 mm
Weight
≤ 235 kg (fully configured cabinet delivered
with boards and modules: including 2 BBUs
and 12 RFUs and excluding the transmission
equipment)
Table 5-720 Equipment specifications of a BTS3900L (Ver.D) cabinet
Item
Specifications
Dimensions (H x W x D)
l DC: 1600 mm x 600 mm x 450 mm
l AC: 1950 mm x 600 mm x 450 mm (with
IMS06; Base: 40 mm x 600 mm x 420
mm)
Weight
l DC: ≤ 235 kg (fully configured cabinet
delivered with boards and modules:
including 2 BBUs and 12 RFUs and
excluding the transmission equipment)
l AC: ≤ 280 kg (fully configured cabinet
delivered with boards and modules:
including 2 BBUs, 12 RFUs, and the AC
power supply, and excluding the
transmission equipment)
Environment Specifications
The BTS3900L (Ver.B), BTS3900L (Ver.C), and BTS3900L (Ver.D) cabinets have the same
environment specifications, as provided in the following table.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
638
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-721 Environment specifications of the BTS3900L (Ver.B), BTS3900L (Ver.C), and
BTS3900L (Ver.D) cabinets
Item
Specification
Operating temperature
-20°C to +55°C
Short term: +50°C to +55°C
NOTE
Short term indicates that a base station does not
work for over 15 days within a year or that a base
station does not continuously work for over 72
hours.
Relative humidity
5% RH to 95% RH
Atmospheric pressure
70 kPa to 106 kPa
Noise Sound Power Level
ETS300 753 3.1
≤7.2bels
Storage Time
It is recommended that the device be installed
and used within one year after its delivery
because of the failure rate.
Surge Protection Specifications
The BTS3900L (Ver.B), BTS3900L (Ver.C), and BTS3900L (Ver.D) cabinets have the same
surge protection specifications, as provided in Table 5-722.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-722 Surge protection specifications of ports on the BTS3900L (Ver.B), BTS3900L
(Ver.C), and BTS3900L (Ver.D) cabinets
Port
Surge Protection
Mode
Specification
DC power supply port
Differential mode
2 kV (1.2/50 μs)
Common mode
4 kV (1.2/50 μs)
Standards
The BTS3900L (Ver.B), BTS3900L (Ver.C), and BTS3900L (Ver.D) cabinets comply with the
same standards, as provided in the following table.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
639
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-723 Standards with which the BTS3900L (Ver.B), BTS3900L (Ver.C), and BTS3900L
(Ver.D) cabinets comply
Item
Standard
Security standards
l X.509: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 1825: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 1826: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 1827: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 4492: Supported in all versions
l RFC 5246: Supported in GBSS15.0/RAN15.0/eRAN6.0/
SRAN8.0 and later versions
l Secure Socket Layer (SSL): Supported in all versions
Protection rating
IP20
Operating environment
ETS 300 019-1-3 Class 3.1
Storage
ETSI EN300019-1-1V2.1.4 (2003-04) class1.2 "Weatherprotected, not temperature-controlled storage locations"
Transportation
ETSI EN300019-1-2V2.1.4 (2003-04) class 2.3 "Public
transportation"
Anti-seismic
performance
IEC 60068-2-57: Environmental testing -Part 2-57: Tests -Test
Ff:Vibration -Time-history method
YD5083: Interim Provisions for Test of Anti-seismic
Performances of Telecommunications Equipment (telecom
industry standard in People's Republic of China)
Anti-earthquake
performance
Issue 05 (2014-08-30)
ETSI EN 300019-1-3: "Earthquake"
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
640
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
EMC
NOTE
The BTS3900L complies with the following standards. If interference
exists because the BTS3900L is installed near antennas or other radio
receive devices, you are advised to extend the distance between them or
adjust the location and direction of antennas.
The multi-mode base station meets the Electromagnetic
Compatibility (EMC) requirements and complies with the
following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8/23
l 3GPP TS 25.113
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The GBTS meets the EMC requirements and complies with the
following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The NodeB has been certified by European standards. The NodeB
meets the EMC requirements and complies with the following
standards:
l CISPR 22 (1997)
l EN 55022 (1998)
l EN 301 489-23 V1.2.1 (2002-11)
l CISPR 24 (1998)
l IEC 61000-4-2
l IEC 61000-4-3
l IEC 61000-4-4
l IEC 61000-4-5
l IEC 61000-4-6
l IEC 61000-4-29
l GB 9254-1998
l ETSI 301 489-1 V1.3.1 (2001-09)
l FCC Part 15
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
641
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
The eNodeB has been certified by European standards. The
eNodeB meets the EMC requirements and complies with the
following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l 3GPP TS 36.113
l ETSI EN 301489-1/23
l ETSI EN 301908-1 V2.2.1 (2003-10)
l ITU-R SM.329-10
5.5.3 BTS3900A Engineering Specifications
BTS3900A engineering specifications include input power specifications, equipment
specifications, environment specifications, surge protection specifications, and standards that
have been complied with.
Input Power Specifications
The BTS3900A (Ver.B), BTS3900A (Ver.C), and BTS3900A (Ver.D) cabinets support the same
power input, as provided in the following table.
Table 5-724 Input power supported by the BTS3900A (Ver.B), BTS3900A (Ver.C), and
BTS3900A (Ver.D) cabinets
Input Power
Voltage Range
-48 V DC
-38.4 V DC to -57 V DC
120/208 V AC to 127/220 V AC dual-livewire
105/176 V AC to 150/260 V AC
100/200 V AC to 120/240 V AC dual-livewire
100/200 V AC to 120/240 V AC
200 V AC to 240 V AC single-phase
176 V AC to 290 V AC
200/346 V AC to 240/415 V AC three-phase
176/304 V AC to 290/500 V AC
Equipment Specifications
The following table lists the equipment specifications of the BTS3900A (Ver.B), BTS3900A
(Ver.C), and BTS3900A (Ver.D) cabinets.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
642
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-725 Equipment specifications of the BTS3900A (Ver.B), BTS3900A (Ver.C), and
BTS3900A (Ver.D) cabinets
Item
Cabinet
Specification
Dimension (H x
W x D)
BTS3900A (Ver.B)/
BTS3900A (Ver.C)/
BTS3900A (Ver.D)
1400 mm x 600 mm x 480 mm (without base)
l APM30H (Ver.B)/APM30H (Ver.C)/
APM30H (Ver.D)/TMC11H (Ver.B)/
TMC11H (Ver.C)/TMC11H (Ver.D): 700 mm
x 600 mm x 480 mm
l RFC (Ver.B)/RFC (Ver.C)/RFC (Ver.D): 700
mm x 600 mm x 480 mm
Base: 200 mm x 600 mm x 480 mm
Weight
BTS3900A (Ver.B)/
BTS3900A (Ver.C)/
BTS3900A (Ver.D)
≤ 194 kg (with boards installed in AC cabinets
before delivery)
l ≤ 87 kg (with APM30H in full configuration,
without transmission devices and storage
batteries)
l ≤ 107 kg (with RFC in full configuration)
Heat Dissipation
Capabilities of
the Cabinet
BTS3900A (Ver.B)
50°C at 700 W
BTS3900A (Ver.C)
50°C at 700 W or 50°C at 1050 W
BTS3900A (Ver.D)
50°C at 700 W or 50°C at 1500 W
Environment Specifications
The BTS3900A (Ver.B), BTS3900A (Ver.C), and BTS3900A (Ver.D) cabinets have the same
environment specifications, as provided in the following table.
Table 5-726 Environment specifications of the BTS3900A (Ver.B), BTS3900A (Ver.C), and
BTS3900A (Ver.D) cabinets
Issue 05 (2014-08-30)
Item
Specification
Operating temperature
-40°C to +50°C (with 1120 W/M2 solar
radiation); an AC heater assembly unit
(HAU) is required if the operating
temperature is below -20°C.
Relative humidity
5% RH to 100% RH
Atmospheric pressure
70 kPa to 106 kPa
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
643
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specification
Noise Sound Power Level
l When the heat consumption of the
APM30H is lower than 700 W and the
output power of an RF module is lower
than or equal to 80 W, the noise sound
power level complies with the ETS 300
753 4.1E (Rural) standard.
– ≤6.1bels@+25°C
– ≤6.7bels@+45°C
l When the heat consumption of the
APM30H is higher than 700 W or the
output power of an RF module is higher
than 80 W, the noise sound power level
complies with the ETS 300 753 4.1E
(Urban) standard.
– ≤6.6bels@+25°C
– ≤7.6bels@+45°C
It is recommended that the device be installed
and used within one year after its delivery
because of the failure rate.
Storage Time
Surge Protection Specifications
The BTS3900A (Ver.B), BTS3900A (Ver.C), and BTS3900A (Ver.D) cabinets have the same
surge protection specifications, as provided in Table 5-727.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-727 Surge protection specifications of ports on the BTS3900A (Ver.B), BTS3900A
(Ver.C), and BTS3900A (Ver.D) cabinets
Port
Usage
Scenario
Surge
Protection
Mode
Specification
-48 V DC output
remote port
Applicable to
all scenarios
Differential
mode
10 kA
Common mode
20 kA
Differential
mode
10 kA
-48 V DC input port
Issue 05 (2014-08-30)
Applicable to
the scenario
where
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
644
3900 Series Base Station
Technical Description
5 Product Specifications
Port
AC power supply
port
Usage
Scenario
Surge
Protection
Mode
Specification
transmission
cabinets,
battery
cabinets, or a
BTS3900A
(DC) is used
Common mode
20 kA
Applicable to
the scenario
where only
RFC cabinets
are used
Differential
mode
3 kA
Common mode
5 kA
Applicable to
the scenario
where RF
modules are
configured
remotely or
are placed
outdoors
together with
the
correspondin
g base station
Differential
mode
30 kA
Common mode
30 kA
Standards
The BTS3900A (Ver.B), BTS3900A (Ver.C), and BTS3900A (Ver.D) cabinets comply with the
same standards, as provided in the following table.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
645
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-728 Standards with which the BTS3900A (Ver.B), BTS3900A (Ver.C), and BTS3900A
(Ver.D) cabinets comply
Item
Standard
Security standards
l X.509: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 1825: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 1826: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 1827: Supported in GBSS14.0/RAN14.0/eRAN3.0/
SRAN7.0 and later versions
l RFC 4492: Supported in all versions
l RFC 5246: Supported in GBSS15.0/RAN15.0/eRAN6.0/
SRAN8.0 and later versions
l Secure Socket Layer (SSL): Supported in all versions
Protection rating
IP55
Operating environment
ETS 300 019-1-4 Class 4.1
Storage
ETSI EN300019-1-1V2.1.4 (2003-04) class1.2 "Weatherprotected, not temperature-controlled storage locations"
Transportation
ETSI EN300019-1-2V2.1.4 (2003-04) class 2.3 "Public
transportation"
Anti-seismic
performance
IEC 60068-2-57: Environmental testing -Part 2-57: Tests -Test
Ff:Vibration -Time-history method
YD5083: Interim Provisions for Test of Anti-seismic
Performances of Telecommunications Equipment (telecom
industry standard in People's Republic of China)
Anti-earthquake
performance
Issue 05 (2014-08-30)
ETSI EN 300019-1-4: "Earthquake"
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
646
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
EMC
NOTE
The BTS3900A complies with the following standards. If interference
exists because the BTS3900A is installed near antennas or other radio
receive devices, you are advised to extend the distance between them or
adjust the location and direction of antennas.
The multi-mode base station meets the Electromagnetic
Compatibility (EMC) requirements and complies with the
following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8/23
l 3GPP TS 25.113
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The GBTS meets the EMC requirements and complies with the
following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The NodeB has been certified by European standards. The NodeB
meets the EMC requirements and complies with the following
standards:
l CISPR 22 (1997)
l EN 55022 (1998)
l EN 301 489-23 V1.2.1 (2002-11)
l CISPR 24 (1998)
l IEC 61000-4-2
l IEC 61000-4-3
l IEC 61000-4-4
l IEC 61000-4-5
l IEC 61000-4-6
l IEC 61000-4-29
l GB 9254-1998
l ETSI 301 489-1 V1.3.1 (2001-09)
l FCC Part 15
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
647
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
The eNodeB has been certified by European standards. The
eNodeB meets the EMC requirements and complies with the
following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l 3GPP TS 36.113
l ETSI EN 301489-1/23
l ETSI EN 301908-1 V2.2.1 (2003-10)
l ITU-R SM.329-10
5.5.4 BTS3900AL Engineering Specifications
BTS3900AL engineering specifications include input power specifications, equipment
specifications, environment specifications, surge protection specifications, and standards that
have been complied with.
Input Power Specifications
The following table lists the input power specifications of a BTS3900AL (Ver.A) cabinet.
Table 5-729 Input power specifications of a BTS3900AL (Ver.A) cabinet
Input Power
Voltage Range
200 V AC to 240 V AC single-phase
176 V AC to 290 V AC
200/346 V AC to 240/415 V AC three-phase
176/304 V AC to 290/500 V AC
120/208 V AC to 127/220 V AC dual-livewire
105/176 V AC to 150/260 V AC
100/200 V AC to 120/240 V AC dual-livewire
90/180 V AC to 135/270 V AC
-48 V DC
-38.4 V DC to -57 V DC
Equipment Specifications
The following table lists the equipment specifications of a BTS3900AL (Ver.A) cabinet.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
648
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-730 Equipment specifications of a BTS3900AL (Ver.A) cabinet
Item
Specification
Dimension (H x W x D)
1925 mm x 770 mm x 750 mm (with the base)
Base: 200 mm x 770 mm x 700 mm
Weight
≤ 550 kg (full configuration, with the base
and full configuration of storage batteries,
and without transmission devices)
Heat Dissipation Capabilities of the Cabinet
50°C at 2200 W
Environment Specifications
The following table lists the environment specifications of a BTS3900AL (Ver.A) cabinet.
Table 5-731 Environment specifications of a BTS3900AL (Ver.A) cabinet
Item
Specification
Operating temperature
l -40°C to +50°C (with 1120 W/M2 solar
radiation and without storage batteries);
an AC heater assembly unit (HAU) is
required if the operating temperature is
below -20°C.
l -40°C to +40°C (with 1120 W/M2 solar
radiation and storage batteries); an AC
heater assembly unit (HAU) is required if
the operating temperature is below -20°C.
Relative humidity
5% RH to 100% RH
Atmospheric pressure
70 kPa to 106 kPa
Noise Sound Power Level
l When the output power of an RF module
is lower than or equal to 80 W, the noise
sound power level complies with the ETS
300 753 4.1E (Rural) standard.
– ≤6.1bels@+25°C
– ≤6.7bels@+45°C
l When the output power of an RF module
is higher than 80 W, the noise sound
power level complies with the ETS 300
753 4.1E (Urban) standard.
– ≤6.6bels@+25°C
– ≤7.6bels@+45°C
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
649
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specification
Storage Time
It is recommended that the device be installed
and used within one year after its delivery
because of the failure rate.
Surge Protection Specifications
Table 5-732 lists the surge protection specifications of ports on a BTS3900AL (Ver.A) cabinet.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-732 Surge protection specifications of ports on a BTS3900AL (Ver.A) cabinet
Port
Surge Protection Mode
Specification
AC input power port
Differential mode
30 kA
Common mode
30 kA
Standards
The following table lists the standards with which a BTS3900AL (Ver.A) cabinet complies.
Table 5-733 Standards with which a BTS3900AL (Ver.A) cabinet complies
Item
Standard
Security
standards
l X.509: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1825: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1826: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1827: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 4492: Supported in all versions
l RFC 5246: Supported in GBSS15.0/RAN15.0/eRAN6.0/SRAN8.0 and later
versions
l Secure Socket Layer (SSL): Supported in all versions
Protectio
n rating
Issue 05 (2014-08-30)
IP55
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
650
3900 Series Base Station
Technical Description
Issue 05 (2014-08-30)
5 Product Specifications
Item
Standard
Operating
environm
ent
ETS 300 019-1-4 Class 4.1
Storage
ETSI EN300019-1-1V2.1.4 (2003-04) class 1.2 "Weatherprotected, not
temperature-controlled storage locations"
Transport
ation
ETSI EN300019-1-2V2.1.4 (2003-04) class 2.3 "Public transportation"
Antiseismic
performa
nce
IEC 60068-2-57: Environmental testing -Part 2-57:Tests -Test Ff:Vibration Time-history method
Antiearthquak
e
performa
nce
ETSI EN 300019-1-4: "Earthquake"
YD5083: Interim Provisions for Test of Anti-seismic Performances of
Telecommunications Equipment (telecom industry standard in People's Republic
of China)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
651
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
EMC
NOTE
The BTS3900AL complies with the following standards. If interference exists because the
BTS3900AL is installed near antennas or other radio receive devices, you are advised to
extend the distance between them or adjust the location and direction of antennas.
The multi-mode base station meets the Electromagnetic Compatibility (EMC)
requirements and complies with the following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8/23
l 3GPP TS 25.113
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The GBTS meets the EMC requirements and complies with the following
standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The NodeB has been certified by European standards. The NodeB meets the
EMC requirements and complies with the following standards:
l CISPR 22 (1997)
l EN 55022 (1998)
l EN 301 489-23 V1.2.1 (2002-11)
l CISPR 24 (1998)
l IEC 61000-4-2
l IEC 61000-4-3
l IEC 61000-4-4
l IEC 61000-4-5
l IEC 61000-4-6
l IEC 61000-4-29
l GB 9254-1998
l ETSI 301 489-1 V1.3.1 (2001-09)
l FCC Part 15
The eNodeB has been certified by European standards. The eNodeB meets the
EMC requirements and complies with the following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
652
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
l 3GPP TS 36.113
l ETSI EN 301489-1/23
l ETSI EN 301908-1 V2.2.1 (2003-10)
l ITU-R SM.329-10
5.5.5 DBS3900 Engineering Specifications
DBS3900 engineering specifications include input power specifications, equipment
specifications, environment specifications, surge protection specifications, and standards that
have been complied with.
Input Power Specifications
The following table lists the input power specifications of a DBS3900.
Table 5-734 Input power specifications of a DBS3900
Item
Input Power
Voltage Range
baseband unit (BBU)
-48 V DC
-38.4 V DC to -57 V DC
remote radio unit (RRU)
-48 V DC
-36 V DC to -57 V DC
Equipment Specifications
The equipment specifications of a DBS3900 include the following:
l
BBU equipment specifications (for details, see5.1 Technical Specifications of the BBU)
l
RRU equipment specifications (for details, see 5.3 Technical Specifications of RRUs)
l
Related cabinet equipment specifications (for details, see 3900 Series Base Station
Hardware Description)
Environment Specifications
The environment specifications of a DBS3900 include the following:
l
BBU environment specifications (for details, see 5.1 Technical Specifications of the
BBU)
l
RRU environment specifications (for details, see 5.3 Technical Specifications of RRUs)
Surge Protection Specifications
The surge protection specifications of ports on a DBS3900 include the following:
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
653
3900 Series Base Station
Technical Description
5 Product Specifications
l
Surge protection specifications of ports on the BBU (for details, see 5.1 Technical
Specifications of the BBU)
l
Surge protection specifications of ports on a remote radio unit (RRU) (for details, see 5.3
Technical Specifications of RRUs)
Standards
The following table lists the standards with which a DBS3900 complies.
Table 5-735 Standards with which a DBS3900 complies
Item
Standard
Security
standard
s
l X.509: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1825: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1826: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1827: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 4492: Supported in all versions
l RFC 5246: Supported in GBSS15.0/RAN15.0/eRAN6.0/SRAN8.0 and later
versions
l Secure Socket Layer (SSL): Supported in all versions
Issue 05 (2014-08-30)
Operatin
g
environ
ment
ETS 300 019-1-4 Class 4.1
Storage
ETSI EN300019-1-1V2.1.4 (2003-04) class 1.2 "Weatherprotected, not
temperature-controlled storage locations"
Transpor
tation
ETSI EN300019-1-2V2.1.4 (2003-04) class 2.3 "Public transportation"
Antiseismic
performa
nce
IEC 60068-2-57: Environmental testing -Part 2-57:Tests -Test Ff:Vibration Time-history method
Antiearthqua
ke
performa
nce
ETSI EN 300019-1-3: "Earthquake"
YD5083: Interim Provisions for Test of Anti-seismic Performances of
Telecommunications Equipment (telecom industry standard in People's Republic
of China)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
654
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
EMC
NOTE
The DBS3900 complies with the following standards. If interference exists because the
DBS3900 is installed near antennas or other radio receive devices, you are advised to extend
the distance between them or adjust the location and direction of antennas.
The multi-mode base station meets the Electromagnetic Compatibility (EMC)
requirements and complies with the following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8/23
l 3GPP TS 25.113
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The GBTS meets the EMC requirements and complies with the following
standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The NodeB has been certified by European standards. The NodeB meets the EMC
requirements and complies with the following standards:
l CISPR 22 (1997)
l EN 55022 (1998)
l EN 301 489-23 V1.2.1 (2002-11)
l CISPR 24 (1998)
l IEC 61000-4-2
l IEC 61000-4-3
l IEC 61000-4-4
l IEC 61000-4-5
l IEC 61000-4-6
l IEC 61000-4-29
l GB 9254-1998
l ETSI 301 489-1 V1.3.1 (2001-09)
l FCC Part 15
The eNodeB has been certified by European standards. The eNodeB meets the
EMC requirements and complies with the following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
655
3900 Series Base Station
Technical Description
Item
5 Product Specifications
Standard
l 3GPP TS 36.113
l ETSI EN 301489-1/23
l ETSI EN 301908-1 V2.2.1 (2003-10)
l ITU-R SM.329-10
5.5.6 BTS3900C Engineering Specifications
BTS3900C engineering specifications include input power specifications, equipment
specifications, environment specifications, surge protection specifications, and standards that
have been complied with.
Input Power Specifications
The BTS3900C and BTS3900C (Ver.C) cabinets support the same power input, as provided in
the following table.
Table 5-736 Input power specifications of the BTS3900C and BTS3900C (Ver.C) cabinets
Input Power
Voltage Range
-48 V DC
-38.4 V DC to -57 V DC
200 V AC to 240 V AC single-phase
176 V AC to 290 V AC
100/200 V AC to 120/240 V AC dual-livewire
90/180 V AC to 135/270 V AC
Equipment Specifications
Table 5-737 and Table 5-738 list the equipment specifications of a BTS3900C cabinet and a
BTS3900C (Ver.C) cabinet, respectively.
Table 5-737 Equipment specifications of a BTS3900C cabinet
Item
Specification
Dimension (H x W x D)
600 mm x 400 mm x 390 mm
l OMB: 600 mm x 240 mm x 390 mm
l RRU subrack: 600mm x 160 mm x 390
mm
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
656
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Specification
Weight
l AC cabinet: ≤ 28 kg (excluding the BBU
and RRU)
l DC cabinet: ≤ 26 kg (excluding the BBU
and RRU)
Table 5-738 Equipment specifications of a BTS3900C (Ver.C) cabinet
Item
Specification
Dimension (H x W x D)
600 mm x 420 mm x 430 mm
l OMB (Ver.C): 600 mm x 240 mm x 430
mm
l RRU subrack: 600mm x 180 mm x 430
mm
Weight
l AC cabinet: ≤ 32 kg (excluding the BBU
and RRU)
l DC cabinet: ≤ 28 kg (excluding the BBU
and RRU)
Heat Dissipation Capabilities of the Cabinet
50°C at 650 W
Environment Specifications
Table 5-739 and Table 5-740 list the environment specifications of a BTS3900C cabinet and a
BTS3900C (Ver.C) cabinet, respectively.
Table 5-739 Environment specifications of a BTS3900C cabinet
Item
Specification
Operating temperature
l With solar radiation: -40°C to +45°C
l Without solar radiation: -40°C to +50°C
Relative humidity
5% RH to 100% RH
Atmospheric pressure
70 kPa to 106 kPa
Noise Sound Power Level
ETS300 753 Rural area, Class 4.1E
l ≤6.1bels@+25°C
l ≤6.7bels@+45°C
Storage Time
Issue 05 (2014-08-30)
It is recommended that the device be installed
and used within one year after its delivery
because of the failure rate.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
657
3900 Series Base Station
Technical Description
5 Product Specifications
Table 5-740 Environment specifications of a BTS3900C (Ver.C) cabinet
Item
Specification
Operating temperature
-33°C to +50°C
Relative humidity
5% RH to 100% RH
Atmospheric pressure
70 kPa to 106 kPa
Noise Sound Power Level
l When the heat consumption of the
BTS3900C (Ver.C) is lower than or equal
to 300 W, the noise sound power level
complies with the ETS 300 753 4.1E
(Rural) standard.
– ≤6.1bels@+25°C
– ≤6.7bels@+45°C
l When the heat consumption of the
BTS3900C (Ver.C) is higher than 300 W,
the noise sound power level complies with
the ETS 300 753 4.1E (Urban) standard.
– ≤6.6bels@+25°C
– ≤7.6bels@+45°C
It is recommended that the device be installed
and used within one year after its delivery
because of the failure rate.
Storage Time
Surge Protection Specifications
Table 5-741 and Table 5-742 list the surge protection specifications of ports on a BTS3900C
cabinet and a BTS3900C (Ver.C) cabinet, respectively.
NOTE
l Unless otherwise specified, the surge protection specifications depend on the surge waveform of 8/20 μs.
l All the surge current items, unless otherwise specified as Maximum discharge current, refer to Nominal
discharge current.
Table 5-741 Surge protection specifications of ports on a BTS3900C cabinet
Port
Surge Protection Mode
Specification
DC port
Surge current
Differential
mode
10 kA
Common mode
15 kA
Differential
mode
40 kA
AC port
Issue 05 (2014-08-30)
Surge current
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
658
3900 Series Base Station
Technical Description
5 Product Specifications
Port
Surge Protection Mode
Common mode
Specification
40 kA
Table 5-742 Surge protection specifications of ports on a BTS3900C (Ver.C) cabinet
Port
Surge Protection Mode
Specification
DC port
Surge current
Differential
mode
10 kA
Common mode
20 kA
Differential
mode
40 kA
Common mode
40 kA
AC port
Surge current
Standards
The BTS3900C and BTS3900C (Ver.C) cabinets comply with the same standards, as provided
in the following table.
Table 5-743 Standards with which the BTS3900C and BTS3900C (Ver.C) cabinets comply
Item
Standard
Security
standards
l X.509: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1825: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1826: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 1827: Supported in GBSS14.0/RAN14.0/eRAN3.0/SRAN7.0 and later
versions
l RFC 4492: Supported in all versions
l RFC 5246: Supported in GBSS15.0/RAN15.0/eRAN6.0/SRAN8.0 and later
versions
l Secure Socket Layer (SSL): Supported in all versions
Issue 05 (2014-08-30)
Protectio
n rating
IP55
Operating
environm
ent
ETS 300 019-1-4 Class 4.1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
659
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
Storage
ETSI EN300019-1-1V2.1.4 (2003-04) class 1.2 "Weatherprotected, not
temperature-controlled storage locations"
Transport
ation
ETSI EN300019-1-2V2.1.4 (2003-04) class 2.3 "Public transportation"
Antiseismic
performa
nce
IEC 60068-2-57: Environmental testing -Part 2-57:Tests -Test Ff:Vibration Time-history method
Antiearthquak
e
performa
nce
ETSI EN 300019-1-4: "Earthquake"
Noise
l ETS 300 753 4.1E (rural area)
YD5083: Interim Provisions for Test of Anti-seismic Performances of
Telecommunications Equipment (telecom industry standard in People's Republic
of China)
l ETS 300 753 4.1E (urban area)
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
660
3900 Series Base Station
Technical Description
5 Product Specifications
Item
Standard
EMC
NOTE
The BTS3900C complies with the following standards. If interference exists because the
BTS3900C is installed near antennas or other radio receive devices, you are advised to
extend the distance between them or adjust the location and direction of antennas.
The multi-mode base station meets the Electromagnetic Compatibility (EMC)
requirements and complies with the following standards:
l R&TTE Directive 1999/5/EC
l R&TTE Directive 89/336/EEC
l ETSI EN 301489-1/8/23
l 3GPP TS 25.113
l ETSI EN 301908-1
l ITU-T SM 329-10
l FCC PART15
The NodeB has been certified by European standards. The NodeB meets the
EMC requirements and complies with the following standards:
l CISPR 22 (1997)
l EN 55022 (1998)
l EN 301 489-23 V1.2.1 (2002-11)
l CISPR 24 (1998)
l IEC 61000-4-2
l IEC 61000-4-3
l IEC 61000-4-4
l IEC 61000-4-5
l IEC 61000-4-6
l IEC 61000-4-29
l GB 9254-1998
l ETSI 301 489-1 V1.3.1 (2001-09)
l FCC Part 15
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
661
3900 Series Base Station
Technical Description
6 Reliability
6
Reliability
3900 series base stations adopt a platform design so that hardware can be shared on this platform.
This provides mature communications technologies and stable transmission reliability.
System Reliability
3900 series base stations feature a reliability design with load sharing and redundancy
configuration, optimized fault detection and isolation technologies for boards and the system.
This greatly enhances system reliability.
l
Redundancy configuration
– Units such as the power supply unit all support redundancy configuration.
– CPRI ports that connect the BBU and RF modules support the ring topology. When one
CPRI link becomes faulty, services are automatically switched over to the other CPRI
link.
– Key files such as software versions and data configuration files all support redundancy
backup.
l
Reliability
The system automatically detects and diagnoses faults in the software, hardware, and
environment, and reports alarms. Then the system automatically clears the faults using selfhealing measures. If the faults cannot be cleared, the faulty units will be automatically
isolated.
Hardware Reliability
l
Anti-misinsertion of boards
When a board is mistakenly inserted into the slot of another board, this board cannot be
connected to the backplane, and in this way, the equipment is free from damage.
l
Overtemperature protection
When the temperature near the power amplifier (PA) in an RF module is too high, the base
station reports an over-temperature alarm and immediately shuts down the PA. This
function protects the PA from damage caused by over-temperature.
l
Reliable power supply
– Wide voltage range and surge protection
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
662
3900 Series Base Station
Technical Description
6 Reliability
– Power failure protection for programs and data
– Protection of power supply against overvoltage, overcurrent, and reverse connection of
positive and negative poles on boards
l
All-round surge protection design
Surge protection is provided for AC and DC power sockets, input and output signal ports
(E1/T1 port, FE/GE ports, interconnection ports, and Boolean alarm port), antenna
connectors, and GPS ports. GPS is short for Global Positioning System.
Software Reliability
l
Redundancy backup
The system stores important files or data such as software versions and data configuration
files to ensure normal operation of the system when errors occur in these files or data.
– Software versions: The system stores software versions. If the current version is
abnormal, the system switches over to the backup version, which ensures normal
operation of the base station.
– Data configuration files: The system stores data configuration files in different
partitions. If the current file is damaged, the base station can continue working properly
by loading the backup file.
l
Error tolerance
When software errors occur, the system can still work due to its self-healing and error
tolerance capabilities, which are supported by the following functions:
– Scheduled check of key resources: The system checks software resource usage
periodically. If resources cannot be released because of software errors, the system can
release the occupied resources in time and export logs and alarms.
– Task monitoring: When software is running, monitoring processes check for internal
software faults or certain hardware faults. If an error occurs in a task, an alarm is reported
and self-healing measures are taken to restore the task.
– Data verification: The system performs scheduled or event-driven data consistency
check, restores data selectively or preferably, and generates logs and alarms.
– Watchdog: When a software error occurs, the base station system detects the error using
the software and hardware watchdogs and automatically resets.
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
663
3900 Series Base Station
Technical Description
Index
Index
Issue 05 (2014-08-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
664