Curriculum Vitae
Engr.\ Ahmed Taha Mohammed Taha
I- Personal Details
Name:
Ahmed Taha Mohammed Taha
Birthday:
15 of June 1975
Nationality:
Egyptian
Marital Status:
Married
Military Service: Exempted
Religion:
Islam
Address:
3 Elshazly St. Beside Almadina Almonawara Mosque
, Extension of Al-makhbaz Alaaly St. after Aleshriny, Ismailia, Egypt.
Home Tel:
+20643136988
Mobile:
+201033992887 (whatsapp also) , +201285755415
E-mail:
tawheed100@yahoo.com
tawheed1000.at@gmail.com
Driving License:
Available (Egyptian & Saudi)
II- Academic History
Qualification:
B.Sc degree in Engineering
Faculty:
Engineering
University:
ZAGAZIG
Department:
Electrical Engineering
Branch:
Electronics & Communication Dept
Year of graduation:
July 1998
Grade of graduation:
VERY GOOD
Final year grade:
VERY GOOD
Graduation project:
X-Y Pen Plotter Controlled By Computer
Project Grade:
EXCELLENT
(1/6)
III- Work History
1- From 1st of April 2018 up to date
Company: Egyptian Electricity Transmission Company
Canal zone Regional Control Center (CANRCC)
Job title:
Supervisor of SCADA operation Control Room
Job duties:
*Finding out the kind of fault and its place (for T.L.) due to
analyzing protection Device result.
* Doing switching operations & Power flow monitoring and
studying &
Electrical power system control by SCADA system
* Aware of SCADA system functionality.
*Maintain a high reliabilities and continuity of power supply to
in the network.
*Monitor SCADA system and notify abnormalities to concern
SCADA section.
*Restore power supply at the earliest under power-interrupted
conditions in association / coordination with the concerned
personals .
2- From 6th of August 2016 tell 31st of March 2018
Company:
Job Title:
MASAR Consulting Engineers (MASAR) in KSA
Electrical Consultant Engineer (At KSA)
Working Sites: * ] Wali Alahd-2 S/S 110/13.8kV , Al Naseem S/S
110/13.8kV , Al Wesam S/S 110/13.8kV [ in Makkah Region
(2/6)
3-From 21st of February 2016 tell 11th of April 2016
Company:
Job Title:
Saudi Technologists Consulting Engineers (SATECH)
Protection CSD Senior Engineer
(Commissioning Service Department)
(At KSA, Riyadh)
Working Sites: Qassim3 380/132/33 kV S/S , Aljowa 132/33kV S/S
4-From 23rd of November 2013 tell 20th of February 2016
Company:
Job Title:
Saudi Technologists Consulting Engineers (SATECH)
Electrical CSD (Commissioning Service Department)
Engineer
Working Sites:
(At KSA, Makkah)
380/110/13.8 kV or 380/110/33 kV S/Ss in Makkah
Area 110/13.8 kV S/Ss in Makkah Area.
Job Duties: * Witnessing all Testing and Commissioning for
1- All Main Equipments, like Power transformers
2- Small equipments, like MCBs, MCCBs, Auxiliary Relays, Metering Devices
3- 380 & 110kV GIS Switchgear Tests .
4- Scheme Check for all types of panels (380 or 110 kV LCC, Switchgear,
Protection, ACDB, DCDB …. e.t.c) ,
5- Final Setting for main relays, (ABB, Siemens, Micom, SEL,……e.t.c.)
6- SAS Open and Close Loop Check.
7- H.V. Test for 380, 110kV GIS, Cables and 13.8kV BB or Switchgear or
Cables.
8- Capacitor Bank Tests and ACCS Logic.
9- 125V, 48V Battery Chargers Tests.
10- CT Primary Injection, CT Loop and VT Loop Tests.
11- 380kV, 110kV GIS or 13.8kV Switchgear Interlocking Check.
……………………. E.T.C.
(3/6)
5-From 9th of November 2008 tell
Company:
22nd of November 2013
Saudi Technologists Consulting Engineers (SATECH)
Job Title:
Electrical Consultant Engineer (At KSA)
Working Sites:
*1:From 20th of December 2008 up to 13th of November 2009
In Al-Kudmi 380/132 kV BSP in Jizan Region
* 2: From 14th of November 2009 up to 2nd of June 2011
In Namera North 380/132 kV BSP in Mecca Region
*3: From 4th of June 2011 up to 16th of November 2012
In Al-Qumriah and Al-Shuhadah 110/33/13.8 kV BSP in Taif Region,
Following up Erection and Testing of Capacitor Bank Project of 13.8kV.
*4: From 17th of November2012 up to date 23rd of December 2012
In Ushairah 110/33/13.8 S/S in Taif Region.
*5: From 24th December 2012 up to date 22nd of November 2013 in
Ruddaf
110/13.8 kV S/S in Taif Region.
Job Duties:
* Following 380 &132 kv GIS Components Erection
* Witnessing GIS Commissioning Works.
* Witnessing General Electrical Equipments Installation.
* Witnessing LCC Panels , SCADA Panels , Protection Panels
,… etc
(4/6)
6-From 27th of June 1999 tell 31st of October 2008
Company:
Egyptian Electricity Transmission Company
Canal zone Regional Control Center (CANRCC)
Job title:
Supervisor of SCADA operation Control Room
Job duties:
*Finding out the kind of fault and its place (for T.L.) due to
analyzing protection Device result.
* Doing switching operations & Power flow monitoring and
studying & Electrical power system control by SCADA system
* Aware of SCADA system functionality.
*Maintain a high reliabilities and continuity of power supply to
in the network.
*Monitor SCADA system and notify abnormalities to concern
SCADA section.
*Restore power supply at the earliest under power-interrupted
conditions in association / coordination with the concerned
personals.
IV- Courses
1) 4th January to 5th Feb. 2003:
Test and maintenance of Power
Transformers & Basics of Power System
Protection & Basics
systems
of SCADA
(EETC Network Training
Center "Cairo")
2) 12th to 23rd November 2006:
Electrical Network Study @
Planning And Network Losses Reduction
(Electrical Power Systems Engineering Egyptian Company)
(5/6)
V-Languages
Arabic:
Native
English:
Good speaking & writing
VI- Skills
1- S.W.
- Operating Systems:
- Programs:
Windows (2007 , 2010)
Google Earth ,Word, Excel & Internet
browsers
2- H.W.
Computer maintenance & Computer Networks
installation and maintenance
(6/6)