EIM – 7/8
Name: __________________
Grade & Section:__________
School: __________________
Score:__________________
Direction: Choose the letter of the correct answer and write it on the space provided before each number.
__ 1. Which is used to measure the voltage, resistance and current of a circuit?
A. Volt-Ohm-Meter
B. Micrometer
C. Ohmmeter
D. Multi tester
___2. Which tool is used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16?
A. Long nose pliers
B. Screw driver
C. Wire gauge
D. Push pull rule
___ 3. Which refers to a pocket- sized tool used to test the line wire or circuit if there is a current in it?
A .Test Light
B .Wire gauge
C .Ruler
D. Pull-push ruler
___ 4.What measuring tool is used to measure the length of an object in centimeter and inches?
A .Test light
B. Wire Gauge
C. Micrometer
D. Pull-push rule
___ 5. Which is used to measure the diameter of wires /conductors in circular mils?
A. Volt-Meter
B. Ammeter
C. Micrometer
D. Ohmmeter
___ 6.Which unit of measurement is used to express resistance?
A. Ohm
B. watt
C. volt
D. ampere
___ 7. Which is an octagonal shaped electrical material where the connections or joints of wires are being done?
A. junction box
B. utility box
c. Panel Board
D. Breaker
___ 8. It has cross tip resembling a positive (+) sign. It is used to drive screws with cross slot heads. Which is described in
the sentences?
A. Standard screw driver
B. Hammer
C. Wire Stripper
D. Philips Screw Driver
___ 9. Which is a circuit protective device that automatically blows and cuts the current when an overload or short
circuit happens?
A. Hammer
B. Screw Driver C. Breaker
D. Fuse
___ 10. Which is a unit of measurement for electric current?
A. Circuit
B. Ampere
C. Kilowatt
D. conductor
___ 11. Which form is used to request for tools or equipment needed for a particular job?
A. Purchase requisition B. Inventory C. Job order or work order form D. Borrower’s form
___ 12. Which is a written instruction to perform a work according to specified requirements, written specified time
frame and cost estimate?
A. Purchase requisition B. Inventory C. Job order or work order form D. Borrower’s form
___ 13. What document is generated by a user department or storeroom-personnel to notify the purchasing
department items, their quantity and the timeframe?
A. Purchase requisition
B. Inventory
C. Job order or work order form
D. Borrower’s
form
___ 14. Which sign indicates that a person should observe extra awareness?
A.
C.
B.
D.
___ 15. Which symbol shows that any activity is not allowed as stated by the symbol?
A.
C.
B.
D.
___ 16. Which symbol specifies hazardous situation which, if not avoided, will result to a serious injury or even death?
A.
C.
B.
D.
___ 17. What is the electrical symbol of fuse?
A.
C.
B.
D.
___ 18. Which is the electrical symbol of a battery?
A.
C.
B.
D.
___ 19. What is the electrical symbol of switch?
A.
C.
B.
D.
___ 20. What ideas or facts show about chemical hazards?
A. These hazards come from falling debris.
C. These hazards come from cleaning products.
B. These hazards come from bacteria .
D. These hazards come from accidents.
___ 21. Which is a chance or probability that a person will experience an adverse health effect once to hazard?
A. Hazard
B. risk
C. Calamity
D. Disaster
___ 22. What does PPE stand for?
A. Protective Personal Equipment
C. Personal Protective Equipment
B. Philippine Power Energy.
D. Philippine Physical Education
___ 23. Which is a hazard that comes from heavy workloads and stress?
A. Chemical hazard
B. Biological hazard
C. Psychological hazard
D. Physical hazard
___ 24. General cleanliness in the work place /work area is important method of ______.
A. Fire prevention
B. Risk assessment
C. Hazard control
D. General repair
___ 25. A small drilling machine with a chuck capacity of ¼‖ to 3/8‖. It is used in making holes on metal
sheets and concrete walls. Which is being described in the sentences?
A. Screw drivers B. Gimlet C. Portable electric drill D. Portable electric grinder
___ 26. How do we use multi tester?
A. By putting a cable on the conductor.
B. By using it as a cleaning tool in the workplace .
C. By connecting a wire from end to end .
D. By setting it in a right direction according to
current, voltage and resistance
___ 27 . What ideas are relevant to biological hazards?
A. Acids and fumes
B. Electrical materials
C. Bacteria and viruses
D. Heavy workloads
___ 28. Why do we need to familiarize the different hazards in our surrounding ?
A. To lessen the awareness on the effects of various hazards.
B. To minimize the damage of property, injuries and loss of life.
C. To prevent economic and social problems.
D. To develop our skills in dealing with other people.
___ 29. Lack of personal cleanliness can affect your familyʼs health.
A. This is true based on the method of controlling hazard. C. This is true according to the survey.
B. This is not true based on the method of hazard.
D. This is not true according to some writers.
___ 30. What do you think are the causes of ergonomic hazard?
A. Heavy workloads and stress
C. Working for long period in an awkward position
B. Conflict with the employer
D. Poorly stored medical wastes
___ 31. Which method will you apply when general cleanliness is used in the work place?
A. Administrative control
B. Risk assessment
C. Hazard control
D. Engineering control
___ 32. What is the relationship of stranded wire and solid wire?
A. Both of them are used in protecting circuits.
B. Both of them are used in fixing appliances.
C. Both of them are used in wiring installation.
D. Both of them are used in diagramming.
___ 33. Why is a project plan necessary before undertaking any project?
A. Because it serves as a guide in accomplishing an activity.
B. Because it is part of the processing method.
C. Because it leads you to understand the procedure.
D. Because it helps you determine the atmosphere of the workplace.
___ 34. What is the best thing that you can do to make sure that the tool you need is functional when you need it?
A. Make a good routine of maintenance for your tools. C. Unlimited use of tools and materials
B. Make a checklist on the different tools.
D. Arrange the tools regularly.
___35. How would you prove that electrical materials are important?
A.
B.
C.
D.
Through electrical materials houses and appliances are properly secured.
Through electrical materials we can save energy.
Through electrical materials we can gain additional income.
Through electrical materials we can do whatever we want.
___36. Why is it necessary to take extra care of the electrical measuring tools and instruments?
A. Because they are expensive.
C. Because they are sensitive.
B. Because they are functional.
D. Because they are attractive
___ 37. What would you recommend to support the Philippine Clean Air Act of 1999?
A. Participate in various programs related to environmental protection.
B. Focus primarily on the causes and effects of global warming.
C. Encourage the youth to be involved in sports.
D. Provide information about current issues.
38. This tool is used in driving, pounding and pulling out nails.
A. Hammer
B. Nails
C. Screwdriver
D. Pliers
39. Devices that hold and protect the lamp and are also called as receptacles.
A. Male Plug
B. Lamp Holder
C. Utility Box
D. Lock and Lock
40. TLE means __________________________