Test Report ID: RA0019938(8) Application ID : JA0017027(6) Applicant : Fat Brain Toy Co. Date: 2019-4-11 Page 1 of 25 20516 Nicholas Circle Elkhorn, Nebraska 68022 Sample : One (1) group of submitted sample(s) stated to be: Sample Description : Dimpl Wobbl Item No. : FA217-1, FA217-2, FA217-3 Packaging Provided : Yes Country of Sale : USA, Canada, EU & Australia Labeled Age Grade : 0+ Age Grade for testing : All ages Date of Receiving : 2019-1-5, 2019-3-25, 2019-4-8 Testing Period : 2019-1-7 to 2019-4-11 ********FOR FURTHER DETAILS, PLEASE REFER TO THE FOLLOWING PAGE(S)******** SIGN FOR AND ON BEHALF OF UNITEC LABORATORY SERVICES (DONGGUAN) LTD. XINLEI DU LABORATORY MANAGER Test Report ID: RA0019938(8) Date: 2019-4-11 Page 2 of 25 TEST REQUEST RESULT AS REQUESTED BY THE APPLICANT, TO PERFORM MECHANICAL AND PHYSICAL A) PROPERTIES TEST(S) OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH ASTM F963-17. AS REQUESTED BY THE APPLICANT, TO PERFORM FLAMMABILITY TEST(S) OF SUBMITTED B) SAMPLE(S) IN ACCORDANCE WITH ASTM F963-17. AS REQUESTED BY THE APPLICANT, TO DETERMINE SOLUBLE HEAVY ELEMENTS CONTENT C) IN THE SUBSTRATE OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH ASTM F963-17. PASS PASS PASS AS REQUESTED BY THE APPLICANT, TO DETERMINE TOTAL LEAD CONTENT IN THE SUBSTRATE OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH U.S. CONSUMER PRODUCT D) SAFETY IMPROVEMENT ACT OF 2008, SECTION 101, ASTM F963-17 AND U.S. CALIFORNIA PASS PROPOSITION 65. AS REQUESTED BY THE APPLICANT, TO DETERMINE PHTHALATES CONTENT OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH U.S. CONSUMER PRODUCT SAFETY IMPROVEMENT ACT E) OF 2008, SECTION 108 AND U.S. CALIFORNIA PROPOSITION 65 AND WASHINGTON PASS CHILDREN’S SAFE PRODUCTS ACT (RCW 70.240.020). AS REQUESTED BY THE APPLICANT, TO DETERMINE BISPHENOL A CONTENT OF F) SUBMITTED SAMPLE(S). PASS AS REQUESTED BY THE APPLICANT, TO DETERMINE LEAD, CADMIUM, MERCURY AND HEXAVALENT CHROMIUM CONTENT OF THE SUBMITTED SAMPLE(S) IN ACCORDANCE WITH G) US MODEL TOXICS IN PACKAGING LEGISLATION(TPCH: TOXICS IN PACKAGING PASS CLEARINGHOUSE) (FORMERLY DRAFTED BY CONEG). AS REQUESTED BY THE APPLICANT, TO PERFORM MECHANICAL AND PHYSICAL H) PROPERTIES TEST(S) OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH CANADA PASS CONSUMER PRODUCT SAFETY ACT, TOYS REGULATIONS SOR/2011-17. AS REQUESTED BY THE APPLICANT, TO PERFORM FLAMMABILITY TEST(S) OF SUBMITTED I) SAMPLE(S) IN ACCORDANCE WITH CANADA CONSUMER PRODUCT SAFETY ACT, TOYS PASS REGULATIONS SOR/2011-17. AS REQUESTED BY THE APPLICANT, TO DETERMINE TOTAL LEAD CONTENT OF SUBMITTED J) SAMPLE(S) IN ACCORDANCE WITH CANADA CONSUMER PRODUCT SAFETY ACT, PASS CONSUMER PRODUCTS CONTAINING LEAD REGULATIONS SOR/2018-83. AS REQUESTED BY THE APPLICANT, TO DETERMINE MERCURY CONTENT OF SUBMITTED K) SAMPLE(S) IN ACCORDANCE WITH CANADIAN ENVIRONMENTAL PROTECTION ACT, PRODUCTS CONTAINING MERCURY REGULATIONS SOR/2014-254. PASS Test Report ID: RA0019938(8) Date: 2019-4-11 Page 3 of 25 TEST REQUEST RESULT AS REQUESTED BY THE APPLICANT, TO DETERMINE PHTHALATES CONTENT OF SUBMITTED L) SAMPLE(S) IN ACCORDANCE WITH CANADA CONSUMER PRODUCT SAFETY ACT, PASS SOR/2016-188 PHTHALATES REGULATIONS. AS REQUESTED BY THE APPLICANT, TO PERFORM MECHANICAL AND PHYSICAL M) PROPERTIES TEST(S) OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH EN 71 PART 1: 2014 PASS +A1:2018. AS REQUESTED BY THE APPLICANT, TO PERFORM FLAMMABILITY TEST(S) OF SUBMITTED N) SAMPLE(S) IN ACCORDANCE WITH EN 71 PART 2: 2011+ A1: 2014. AS REQUESTED BY THE APPLICANT, TO DETERMINE MIGRATION OF CERTAIN ELEMENTS OF O) SUBMITTED SAMPLE(S) IN ACCORDANCE WITH EN 71 PART 3:2013+A3:2018. AS REQUESTED BY THE APPLICANT, TO DETERMINE N-NITROSAMINES PASS PASS AND P) N-NITROSATABLE SUBSTANCES OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH EN 71 PASS PART 12: 2013. AS REQUESTED BY THE APPLICANT, TO DETERMINE FLAME RETARDANT CONTENT OF Q) SUBMITTED SAMPLE(S) IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2009/48/EC AND ITS PASS AMENDMENTS. AS REQUESTED BY THE APPLICANT, TO DETERMINE MIGRATION OF PHENOL OF SUBMITTED R) SAMPLE(S) IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2009/48/EC AND ITS PASS AMENDMENTS. AS REQUESTED BY THE APPLICANT, TO DETERMINE CADMIUM CONTENT OF SUBMITTED S) SAMPLE(S) IN ACCORDANCE WITH ENTRY 23 OF ANNEX XVII OF THE REACH REGULATION PASS (EC) NO. 1907/2006 AND ITS AMENDMENTS. AS REQUESTED BY THE APPLICANT, TO DETERMINE PHTHALATES CONTENT OF SUBMITTED T) SAMPLE(S) IN ACCORDANCE WITH ENTRY 51 AND 52 OF ANNEX XVII OF THE REACH PASS REGULATION (EC) NO. 1907/2006 AND ITS AMENDMENTS. AS REQUESTED BY THE APPLICANT, TO DETERMINE BENZENE CONTENT OF SUBMITTED U) SAMPLE(S) IN ACCORDANCE WITH ENTRY 5 OF ANNEX XVII OF THE REACH REGULATION PASS (EC) NO. 1907/2006 AND ITS AMENDMENTS. AS REQUESTED BY THE APPLICANT, TO DETERMINE THE SHORT-CHAIN CHLORINATED V) PARAFFINS (SCCP) CONTENT OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH EU REGULATION (EC) NO. 850/2004 AND ITS AMENDMENTS. PASS Test Report ID: RA0019938(8) Date: 2019-4-11 Page 4 of 25 TEST REQUEST AS REQUESTED RESULT BY THE APPLICANT, TO DETERMINE POLYCYCLIC AROMATIC W)HYDROCARBONS (PAHS) CONTENT OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH PASS GERMAN AFPS GS 2014:01 PAK. AS REQUESTED BY THE APPLICANT, TO DETERMINE POLYCYCLIC AROMATIC HYDROCARBONS (PAHS) CONTENT OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH X) ENTRY 50 OF ANNEX XVII OF THE REACH REGULATION (EC) NO. 1907/2006 AND ITS PASS AMENDMENTS. AS REQUESTED BY THE APPLICANT, TO DETERMINE LEAD, CADMIUM, MERCURY AND Y) HEXAVALENT CHROMIUM CONTENT OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH PASS EUROPEAN COUNCIL DIRECTIVE 94/62/EC AND ITS AMENDMENTS. AS REQUESTED BY THE APPLICANT, TO PERFORM MECHANICAL AND PHYSICAL Z) PROPERTIES TEST(S) OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH AS/NZS 8124.1: PASS 2016. AS REQUESTED BY THE APPLICANT, TO PERFORM FLAMMABILITY TEST(S) OF SUBMITTED AA) SAMPLE(S) IN ACCORDANCE WITH AS/NZS 8124.2: 2016. PASS AS REQUESTED BY THE APPLICANT, TO DETERMINE SOLUBLE ELEMENTS CONTENT OF BB) SUBMITTED SAMPLE(S) IN ACCORDANCE WITH AS/NZS 8124-3: 2012 / AMDT 1: 2016. PASS AS REQUESTED BY THE APPLICANT, TO DETERMINE DEHP CONTENT OF SUBMITTED CC) SAMPLE(S) IN ACCORDANCE WITH AUSTRALIAN CONSUMER LAW. PASS AS REQUESTED BY THE APPLICANT, TO PERFORM MECHANICAL AND PHYSICAL DD) PROPERTIES TEST(S) OF SUBMITTED SAMPLE(S) IN ACCORDANCE WITH ISO 8124 - 1: 2018. PASS AS REQUESTED BY THE APPLICANT, TO PERFORM FLAMMABILITY TEST(S) OF SUBMITTED EE) SAMPLE(S) IN ACCORDANCE WITH ISO 8124 - 2: 2014. PASS AS REQUESTED BY THE APPLICANT, TO DETERMINE SOLUBLE ELEMENTS CONTENT IN THE FF) SUBMITTED SAMPLE(S) IN ACCORDANCE WITH ISO 8124-3:2010/Amd 2:2018 PASS AS REQUESTED BY THE APPLICANT, TO DETERMINE PHTHALATES CONTENT OF SUBMITTED GG) SAMPLE(S) IN ACCORDANCE WITH ISO 8124 - 6: 2018. PASS Test Report ID: RA0019938(8) Date: 2019-4-11 Page 5 of 25 Test Result(s): A) ASTM F963 – 17 Mechanical and Physical Test As per ASTM F963-17, Standard Consumer Safety Specification for Toy Safety. The submitted samples were undergone the use and abuse tests in accordance with the Federal Hazardous Substances 1 Act (FHSA), title 16, code of federal regulations* : Test Item(s) FHSA Parameter Impact Section 1500.51(b) 10 drops×4.5 ft Torque Section 1500.53(e) 4 in-lbf, 10 sec Tension Section 1500.53(f) 15 lbf, 10 sec Compression Section 1500.53(g) 30 lbf, 10 sec Clause Description 4 General Requirements Pass 4.1 Material Quality Pass 4.6 Small Objects Pass 4.6.1 Toys that are Intended for Children Under 36 Months of Age Pass 4.7 Accessible Edges Pass 4.9 Accessible Points Pass 4.32 Certain Toys with Spherical Ends Pass 5 Safety Labeling Requirements Pass 6 Instructional Literature Pass 7 Producer’s Markings Note: 1. Result - Name of Producer / Distributor (Toy) Yes - Address Yes 1 * = The submitted samples were undergone the tests in accordance with section 8.5 through section 8.18 and 8.20 through 8.25 on normal use, abuse and specific tests for different types of toys whichever is applicable. 2. Only applicable clauses were shown. Test Report ID: RA0019938(8) Date: 2019-4-11 Page 6 of 25 B) ASTM F963 – 17 Flammability Test of Toys As per clause 4.2 of ASTM F963-17, Standard Consumer Safety Specification for Toy Safety. Solids and Soft Toys Flammability Testing: Note: Sample Name Burning Rate (inch/sec.) Limit (inch/sec.) Dimpl Wobbl Did Not Ignite 0.10 The submitted sample and its accessories were tested, the above result only showed the most severe burning rate of the sample. C) ASTM F963-17 Soluble Heavy Elements in Accessible Substrate Materials With reference to ASTM F963-17 Clause 8.3. Analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Test Item Cd Pb Hg Cr As Sb Se Ba --- Method Detection Limit (mg/kg) 5 5 2 5 2 2 5 5 --- Permissible Limit (mg/kg) 75 90 60 60 25 60 500 1000 --- Test Part Description Result (mg/kg) Comment No.1 Blue silicone ND ND ND ND ND ND ND ND Pass No.2 White silicone ND ND ND ND ND ND ND ND Pass No.3 Green silicone ND ND ND ND ND ND ND ND Pass No.4 Orange silicone ND ND ND ND ND ND ND ND Pass Note: 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) 3. Results of soluble elements shown are of the adjusted analytical results. Test Report ID: RA0019938(8) Date: 2019-4-11 Page 7 of 25 D) Total Lead in Accessible Substrate Materials With reference to CPSC-CH-E1002-08.3, analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Test Item Total Lead (Pb) --- 2 --- 100 --- Result (mg/kg) Comment ND Pass ND Pass Method Detection Limit (mg/kg) CPSIA Sec 101 / Cal. Prop 65 / ASTM F963-17 Limits (mg/kg) Test Part Description Blue silicone No.1 White silicone Green silicone No.2 Note: Orange silicone 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) E) Phthalates Content With reference to CPSC-CH-C1001-09.4, analysis was performed by Gas Chromatography/Mass Spectrometry (GC-MS). Test Item DBP BBP DEHP DINP DNOP DIDP --- Method Detection Limit (%) 0.003 0.003 0.003 0.010 0.003 0.010 --- 0.1 0.1 0.1 0.1 --- 0.1 --- CPSIA Sec 108 & Cal. Prop 65 Limits (%) Washington Limit (%) 0.1 (Sum) --- Test Part Description Result (%) Comment No.1 No.2 Blue silicone White silicone Green silicone Orange silicone Test Item Method Detection Limit (%) CPSIA Sec 108 & Cal. Prop 65 Limits (%) ND ND ND ND ND ND Pass ND ND ND ND ND ND Pass DnHP DIBP DPENP DCHP --- 0.003 0.003 0.010 0.010 --- 0.1 0.1 0.1 0.1 --- DHEXP Test Part Description No.1 Blue silicone White silicone Result (%) ND ND ND Comment ND Pass Test Report ID: RA0019938(8) Date: 2019-4-11 DnHP Test Item DIBP DPENP DCHP --- 0.003 0.003 0.010 0.010 --- 0.1 0.1 0.1 0.1 --- DHEXP Method Detection Limit (%) CPSIA Sec 108 & Cal. Prop 65 Limits (%) Test Part Description No.2 Note: Green silicone Orange silicone 1. % = Percentage by weight (w/w) 2. 0.1% = 1000ppm (mg/kg) 3. ND = Not detected (<Method detection limit) Page 8 of 25 Result (%) ND ND ND Comment ND Pass F) Bisphenol A Content In-house method. Analysis was performed by Gas Chromatography/Mass Spectrometry (GC-MS). Test Item Method Detection Limit (mg/kg) Permissible Limit (mg/kg) Test Part Description Blue silicone No.1 White silicone Green silicone No.2 Note: Orange silicone 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) Total Bisphenol A --- 1 --- Not Detected --- Result (mg/kg) Comment ND Pass ND Pass Test Report ID: RA0019938(8) Date: 2019-4-11 Page 9 of 25 G) Toxic Elements in Packaging Materials Wet acid digestion and EPA 3060A:1996, Analysis was performed by Inductively Coupled Plasma Optima Emission Spectrometer (ICP-OES) and UV-VIS Spectrophotometer. Test Item Total [Pb + Cd + Cd Pb Hg Cr(VI) Method Detection Limit(mg/kg) 2 2 2 2 --- --- Permissible Limit (mg/kg) - - - - 100 --- Test Part Description --- Hg + Cr(VI)] Result (mg/kg) Comment Transparent plastic excluded coating No.1 Transparent plastic round sticker <2 <2 <2 <2 <8 Pass <2 3.5 <2 <2 3.5-9.5 Pass <2 <2 <2 <2 <8 Pass White plastic excluded coating No.2 No.3 Note: Multicolor coating on plastic Multicolor coating on paper White paper excluded coating 1. mg/kg = ppm 2. “-” = Not regulated 3. “<” = Less than H) SOR/2011-17 Mechanical and Physical Test As per Canada Consumer Product Safety Act, Toys Regulations SOR/2011-17. The submitted samples were undergone the use and abuse tests in accordance with Canada Consumer Product Safety Act, Toys Regulations SOR/2011-17: Test Item(s) Parameter Drop Test 4 drops, 4.5 ft Pull Test 10 lbf, 10 sec Push Test 10 lbf, 10 sec Clause Description Result 7 Small parts Pass 10 Plastic Edges Pass Note: Only applicable clauses were shown. Test Report ID: RA0019938(8) Date: 2019-4-11 Page 10 of 25 I) SOR/2011-17 Flammability Test of Toys As per Canada Consumer Product Safety Act, Toys Regulations SOR/2011-17 Section 21. Clause Description 21 Celluloid or Cellulose Nitrate Note: Result Pass Only applicable clauses were shown. J) SOR/2018-83 Total Lead Content With reference to SOR/2018-83. Analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Test Item Total Lead (Pb) --- Method Detection Limit (mg/kg) 2 --- Permissible Limit (mg/kg) 90 --- Result (mg/kg) Comment ND Pass ND Pass Test Part Description Blue silicone No.1 White silicone Green silicone No.2 Note: Orange silicone 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) K) SOR/2014-254 Mercury Content With reference to SOR/2014-254. Analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Test Item Method Detection Limit (mg/kg) Permissible Limit (mg/kg) Test Part Description No.1 No.2 Blue silicone White silicone Green silicone Orange silicone Mercury (Hg) --- 2 --- 1000 --- Result (mg/kg) Comment ND Pass ND Pass Test Report Note: ID: RA0019938(8) 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) Date: 2019-4-11 Page 11 of 25 L) SOR/2016-188 Phthalates Content With reference to SOR/2016-188, analysis was performed by Gas Chromatography/Mass Spectrometry (GC-MS). Test Item DBP BBP DEHP DINP DNOP DIDP --- Method Detection Limit (%) 0.003 0.003 0.003 0.010 0.003 0.010 --- 0.1 0.1 0.1 0.1 0.1 0.1 --- Permissible Limit (%) Test Part Description No.1 No.2 Note: Blue silicone White silicone Green silicone Orange silicone 1. % = Percentage by weight (w/w) 2. 0.1% = 1000ppm (mg/kg) 3. ND = Not detected (<Method detection limit) Result (%) Comment ND ND ND ND ND ND Pass ND ND ND ND ND ND Pass M) EN 71 Part 1: 2014 +A1: 2018 Mechanical and Physical Test As per European Standard on Safety of Toys EN 71 Part 1: 2014 +A1: 2018. Clause Description 4 General Requirements Pass 4.1 Material Cleanliness Pass 4.7 Edges Pass 4.8 Points and Metallic Wires Pass 5 Toys Intended for Children Under 36 Months Pass 5.1 General Requirements Pass 5.8 Shape and Size of Certain Toys Pass 7 Warnings, Markings and Instructions for Use Pass Note: 1. Only applicable clauses were shown. Result Test Report 2. ID: RA0019938(8) Date: 2019-4-11 Page 12 of 25 Additional information according to the Toy Safety Directives 2009/48/EC requirement. These information also appears as a note within the EN71 but are not standard requirements: a) Marking The manufacturer's and importer's name, registered trade name or registered trade mark, the address and the CE-marking shall be indicated on the toy or, where that is not possible, on its packaging or in a document accompany the toy. In addition, manufacturers shall ensure that their toys bear a type, batch, serial or model number or other element allowing their identification, or where the size or nature of the toy does not allow it, that the required information is provided on the packaging or in a document accompanying the toy. After checking, it was found that: - Manufacturer's name was on the packaging. - Manufacturer's address was on the packaging. - Importer's name was missed. - Importer's address was missed. - Product identification code was on the packaging. - CE-marking was on the packaging. b) Cleaning instruction A toy intended for use by children under 36 months must be designed and manufactured in such a way that it can be cleaned. The toy shall fulfill the safety requirements also after having been cleaned in accordance with this point and the manufacturer's instructions. The manufacturer should, if applicable, provided instructions on how the toy has to be cleaned. After checking, the requirement is not applicable to the submitted samples. N) EN 71 Part 2: 2011+ A1: 2014 Flammability Test of Toys As Per European Standard on Safety of Toys EN 71-2: 2011+ A1: 2014. Clause Description 4.1 General Requirements Note: Only applicable clause was shown. Result Pass Test Report ID: RA0019938(8) Date: 2019-4-11 Page 13 of 25 O) EN 71 Part 3:2013+A3:2018 Migration of Certain Elements With reference to EN 71-3:2013+A3:2018, analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES) and Gas Chromatography/Mass Spectrometry (GC-MS). Result (mg/kg) Test Item Permissible Limit (mg/kg) No.1 No.2 No.3 No.4 Category III MDL (mg/kg) Cadmium (Cd) ND ND ND ND 17 0.1 Lead (Pb) ND ND ND ND 23 1 Mercury (Hg) ND ND ND ND 94 0.1 Chromium(III) (Cr ) 3+ ND ND ND ND 460 # 6+ Chromium(VI) (Cr ) ND ND ND ND 0.2 # Arsenic (As) ND ND ND ND 47 0.1 Antimony (Sb) ND ND ND ND 560 5 Selenium (Se) ND ND ND ND 460 5 Barium (Ba) ND ND ND ND 18750 5 Aluminum (Al) ND ND ND ND 70000 5 Boron (B) ND ND ND ND 15000 5 Cobalt (Co) ND ND ND ND 130 1 Copper (Cu) ND ND ND ND 7700 5 Manganese (Mn) ND ND ND ND 15000 5 Nickel (Ni) ND ND ND ND 930 5 Strontium (Sr) ND ND ND ND 56000 5 Tin (Sn) ND ND ND ND 180000 5 ND ND ND ND 12 0.2 ND ND 13.1 11.5 46000 5 Pass Pass Pass Pass --- --- Organic Tin* Zinc (Zn) Comment Test Part Description: No.1 Blue silicone No.2 White silicone No.3 Green silicone No.4 Orange silicone Note: 1. mg/kg = Milligram per kilogram = ppm 2. MDL = Method detection limit Test Report ID: RA0019938(8) Date: 2019-4-11 Page 14 of 25 3. ND = Not detected (< MDL) 4. # =The substance is calculated by the results of Chromium element; MDL for Chromium element is 0.1ppm. 5. * = Methyl tin, Butyl tin, Di-n-propyl tin, Dibutyl tin, Tributyl tin, n-Octyl tin, Tetrabutyl tin, Diphenyl tin, Di-n-octyl tin, Triphenyl tin. The migration of individual organic tins are expressed as Tributyl tin, based on the relative molecular weight. Remark: Toy material categories 1. Category I: Dry, brittle, powder like or pliable Includes solid toy material from which powder-like material is released during play. The material can be ingested. Contamination of the hands with powder contributes to enhanced oral exposure. 2. Category II: Liquid or sticky Includes fluid or viscous toy material which can be ingested and/or to which dermal exposure occurs during playing. 3. Category III : Scraped-off Includes solid toy material with or without a coating which can be ingested as a result of biting, tooth scraping, sucking or licking. This category includes those materials which are not covered by category I and II. P) EN 71 Part 12: 2013 N-Nitrosamines and N-Nitrosatable substances With reference to EN 71-12: 2013, analysis was performed by HPLC-MS/MS. Result (mg/kg) Test Item MDL (mg/kg) Limit (mg/kg) ND 0.01 0.05 ND ND 0.1 1 Pass Pass --- --- No.1 No.2 No.3 No.4 N-Nitrosamines ND ND ND N-Nitrosatable substances ND ND Pass Pass Comment Test Part Description: No.1 Blue silicone No.2 White silicone No.3 Green silicone No.4 Orange silicone Note: 1. mg/kg = Milligram per kilogram 2. ND = Not detected (<Method detection limit) 3. MDL = Method Detection Limit 4. N-Nitrosamines tested: Test Report ID: RA0019938(8) Date: 2019-4-11 Name of the substance CAS number N-nitrosodiethanolamine 1116-54-7 N-nitrosodimethylamine 62-75-9 N-nitrosodiethylamie 55-18-5 N-nitrosodipropylamine 621-64-7 N-nitrosodiisopropylamine 601-77-4 N-nitrosodibutylamine 924-16-3 N-nitrosodiisobutylamine 997-95-5 N-nitrosodiisononylamine 1207995-62-7 N-nitrosomorpholine 59-89-2 N-nitrosopiperidine 100-75-4 N-nitrosodibenzylamine 5336-53-8 N-nitroso-N-methyl-N-phenylamine 614-00-6 N-nitroso-N-ethyl-N-phenylamine 612-64-6 Page 15 of 25 Q) 2009/48/EC - Flame Retardant Content In-house method, analysis was performed by Gas Chromatography / Mass Spectrometry (GC-MS). Test Item TCEP TCPP TDCP --- Method Detection Limit (mg/kg) 5 5 5 --- Permissible Limit (mg/kg) 5 5 5 --- Test Part Description Blue silicone No.1 White silicone Green silicone No.2 Note: Orange silicone 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected Result (mg/kg) Comment ND ND ND Pass ND ND ND Pass Test Report ID: RA0019938(8) Date: 2019-4-11 Page 16 of 25 R) 2009/48/EC - Migration of Phenol With reference to EN 71-10: 2005 and EN 71-11: 2005. Analysis was performed by Gas Chromatography / Mass Spectrometry (GC-MS). Test Item Phenol --- 0.5 --- 5 --- Result (mg/l) Comment Method Detection Limit (mg/l) Permissible Limit (mg/l) Test Part Description No.1 Blue silicone ND Pass No.2 White silicone ND Pass No.3 Green silicone ND Pass No.4 Orange silicone ND Pass Note: 1. mg/l = Milligram per liter 2. ND = Not detected (<Method detection limit) S) REACH Annex XVII - Cadmium Content With reference to EN1122: 2001 method B. Analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Test Item Method Detection Limit (mg/kg) Permissible Limit (mg/kg) Test Part Description Blue silicone No.1 White silicone No.2 White plastic inside Green silicone No.3 Note: Orange silicone 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (< Method detection limit) Cadmium Content (Cd) --- 2 --- 100 --- Result (mg/kg) Comment ND Pass ND Pass ND Pass Test Report ID: RA0019938(8) Date: 2019-4-11 Page 17 of 25 T) REACH Annex XVII - Phthalates Content With reference to EN14372:2004, analysis was performed by Gas Chromatography/Mass Spectrometry (GC-MS). Test Item DBP BBP DEHP DIBP DINP DNOP DIDP --- Method Detection Limit (%) 0.003 0.003 0.003 0.003 0.010 0.003 0.010 --- Permissible Limit (%) 0.1 (Sum) Test Part Description No.1 No.2 No.3 Note: Blue silicone White silicone Green silicone Orange silicone White plastic inside 0.1 (Sum) --- Result (%) Comment ND ND ND ND ND ND ND Pass ND ND ND ND ND ND ND Pass ND ND ND ND ND ND ND Pass 1. % = Percentage by weight (w/w) 2. 0.1% = 1000ppm (mg/kg) 3. ND = Not detected (<Method detection limit) U) REACH Annex XVII - Benzene Content In-house method. Analysis was performed by Gas Chromatography/Mass Spectrometry (GC-MS). Test Item Benzene --- Method Detection Limit (%) 0.0005 --- Permissible Limit (%) 0.0005 --- Test Part Description Result (%) Comment ND Pass ND Pass Blue silicone No.1 White silicone Green silicone No.2 Note: Orange silicone 1. % = Percentage by weight (w/w) 2. 0.0005% = 5ppm (mg/kg) 3. ND = Not detected (<Method detection limit) Test Report ID: RA0019938(8) Date: 2019-4-11 Page 18 of 25 V) SCCP Content In-house method, analysis was performed by Gas Chromatography/Mass Spectrometry (GC-MS). Test Item Alkanes, C10 -C13, chloro (short-chain chlorinated paraffins) (SCCPs) --- CAS No. 85535-84-8 --- Method Detection Limit (%) 0.01 --- Permissible Limit (%) 0.15 --- Test Part Description Result (%) Comment ND Pass ND Pass ND Pass Blue silicone No.1 White silicone No.2 White plastic inside Green silicone No.3 Note: Orange silicone 1. % = Percentage by weight (w/w) 2. 0.15% = 1500ppm (mg/kg) 3. ND = Not detected (<Method detection limit) 4. MDL = Method detection limit W) AfPS GS 2014:01 PAK - 18 PAHs Content With reference to AfPS GS 2014:01 PAK, analysis was performed Gas Chromatography/Mass Spectrometry (GC-MS). PAHs CAS No. Naphthalene Result (mg/kg) Permissible Limit (mg/kg) No.1 No.2 Category I 91-20-3 ND ND 1 Acenaphthylene 208-96-8 ND ND Acenaphthene 83-32-9 ND ND Fluorene 86-73-7 ND ND Phenanthrene 85-01-8 ND ND Anthracene 120-12-7 ND ND Fluoranthene 206-44-0 ND ND Pyrene 129-00-0 ND ND Benzo[a]anthracene 56-55-3 ND ND 0.2 Chrysene 218-01-9 ND ND 0.2 Benzo[b]fluoranthene 205-99-2 ND ND 0.2 1 (sum) Test Report ID: RA0019938(8) PAHs CAS No. Benzo[k]fluoranthene Date: 2019-4-11 Page 19 of 25 Result (mg/kg) Permissible Limit (mg/kg) No.1 No.2 Category I 207-08-9 ND ND 0.2 Benzo[a]pyrene 50-32-8 ND ND 0.2 Indeno[1,2,3-cd]pyrene 193-39-5 ND ND 0.2 Dibenzo[a,h]anthracene 53-70-3 ND ND 0.2 Benzo[g,h,i]perylene 191-24-2 ND ND 0.2 Benzo[j]fluoranthen 205-82-3 ND ND 0.2 Benzo[e]pyrene 192-97-2 ND ND 0.2 Sum of 18 PAHs --- ND ND 1 Pass Pass --- Comment Test Part Description: No.1 Blue silicone White silicone No.2 Green silicone Orange silicone Note: 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) 3. Method detection limit = 0.10mg/kg Remark: Material categories 1. Category I: Materials intended to be put in the mouth, or materials of toys with intended to long-term skin contact (longer than 30 seconds). 2. Category II: Materials not covered by Category I, with foreseeable skin contact for longer than 30 seconds (long-term skin contact) or repeated short-term skin contact. a) Toys in the scope of 2009/48/EC, b) Other products in the scope 3. Category III: Materials not covered by category I or II, with foreseeable skin contact up to 30 second (short-term skin contact) a) Toys in the scope of 2009/48/EC, b) Other products in the scope Test Report ID: RA0019938(8) Date: 2019-4-11 Page 20 of 25 X) REACH Annex XVII - 8 PAHs Content With reference to AfPS GS 2014:01 PAK, analysis was performed Gas Chromatography/Mass Spectrometry (GC-MS). PAHs CAS No. Benzo[a]anthracene Result (mg/kg) Permissible Limit (mg/kg) No.1 No.2 56-55-3 ND ND 0.5 Chrysene 218-01-9 ND ND 0.5 Benzo[b]fluoranthene 205-99-2 ND ND 0.5 Benzo[k]fluoranthene 207-08-9 ND ND 0.5 Benzo[a]pyrene 50-32-8 ND ND 0.5 Dibenzo[a,h]anthracene 53-70-3 ND ND 0.5 Benzo[j]fluoranthen 205-82-3 ND ND 0.5 Benzo[e]pyrene 192-97-2 ND ND 0.5 Pass Pass --- Comment Test Part Description: No.1 Blue silicone White silicone No.2 Green silicone Orange silicone Note: 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) 3. Method detection limit = 0.10mg/kg Test Report ID: RA0019938(8) Date: 2019-4-11 Page 21 of 25 Y) Toxic Elements in Packaging Materials Wet acid digestion and EPA 3060A:1996. Analysis was performed by Inductively Coupled Plasma Optima Emission Spectrometer (ICP-OES) and UV-VIS Spectrophotometer. Test Item Total [Pb + Cd Cd Pb Hg Cr(VI) Method Detection Limit(mg/kg) 2 2 2 2 --- --- Permissible Limit (mg/kg) --- --- --- --- 100 --- Test Part Description --- + Hg + Cr(VI)] Result (mg/kg) Comment Transparent plastic excluded coating No.1 Transparent plastic round sticker <2 <2 <2 <2 <8 Pass <2 3.5 <2 <2 3.5-9.5 Pass <2 <2 <2 <2 <8 Pass White plastic excluded coating Multicolor coating on plastic No.2 Multicolor coating on paper No.3 Note: White paper excluded coating 1. mg/kg = Milligram per kilogram = ppm 2. < = Less than Z) AS/NZS 8124.1: 2016 Mechanical and Physical Test As per Australian / New Zealand Standard on Safety of Toys AS/NZS 8124.1: 2016 Mechanical and Physical Test. Clause Description 4 General Requirements Pass 4.1 Normal Use Pass 4.2 Reasonably foreseeable abuse Pass 4.3 Material Pass 4.4 Small parts Pass 4.5 Shape, Size And Strength of Certain Toys Pass 4.6 Edges Pass 4.7 Points Pass Annex A Age-Grading Guidelines Pass Annex B Safety-Labeling Guidelines and Manufacturer’s Markings Pass Note: Only applicable clauses were shown. Result Test Report AA) ID: RA0019938(8) Date: 2019-4-11 Page 22 of 25 AS/NZS 8124.2: 2016 Flammability Test of Toys As per Australian / New Zealand Standard on Safety of Toys AS/NZS 8124.2:2016 Flammability Test of Toys. Clause Description 4.1 General Requirements Note: Result Pass Only applicable clause was shown. AS/NZS ISO 8124 - 3: 2012 / Amdt 1: 2016 - Migration of certain elements BB) With reference to AS/NZS ISO 8124-3: 2012 / Amdt 1: 2016. Analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Test Item Cd Pb Hg Cr As Sb Se Ba --- Method Detection Limit(mg/kg) 5 5 2 5 2 2 5 5 --- Permissible Limit(mg/kg) 75 90 60 60 25 60 500 1000 --- Test Part Description Result (mg/kg) Comment No.1 Blue silicone ND ND ND ND ND ND ND ND Pass No.2 White silicone ND ND ND ND ND ND ND ND Pass No.3 Green silicone ND ND ND ND ND ND ND ND Pass No.4 Orange silicone ND ND ND ND ND ND ND ND Pass Note: 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) 3. Results of soluble elements shown are of the adjusted analytical results. CC) Australian Consumer Law - Phthalate Content - DEHP With reference to CPSC-CH-C1001-09.3, Standard Operating Procedure for Determination of Phthalates. Analysis was performed by Gas Chromatography/Mass Spectrometry (GC-MS). Test Item DEHP --- Method Detection Limit (%) 0.003 --- Permissible Limit (%) 1 --- Test Part Description Result (%) Comment ND Pass Blue silicone No.1 White silicone Test Report ID: RA0019938(8) Date: 2019-4-11 Page 23 of 25 Test Item DEHP --- Method Detection Limit (%) 0.003 --- Permissible Limit (%) 1 --- Test Part Description Result (%) Comment ND Pass Green silicone No.2 Note: Orange silicone 1. % = Percentage by weight (w/w) 2. 0.1% = 1000ppm (mg/kg) 3. ND = Not detected (<Method detection limit) DD) ISO 8124 - 1: 2018 Mechanical and Physical Test As per International Standard on Safety of Toys ISO 8124-1: 2018 Mechanical and Physical Test. Clause Description 4 General Requirements Pass 4.1 Normal Use Pass 4.2 Reasonably foreseeable abuse Pass 4.3 Material Pass 4.4 Small parts Pass 4.5 Shape, Size And Strength of Certain Toys Pass 4.6 Edges Pass 4.7 Points Pass Annex A Age-Grading Guidelines Pass Annex B Safety-Labeling Guidelines and Manufacturer’s Markings Pass Note: Result Only applicable clauses were shown. EE) ISO 8124 - 2: 2014 Flammability Test of Toys As per International Standard on Safety of Toys ISO 8124-2: 2014 Flammability Test of Toys. Clause Description 4.1 General requirements Note: Only applicable clause was shown. Result Pass Test Report ID: RA0019938(8) Date: 2019-4-11 Page 24 of 25 FF) ISO 8124-3:2010/Amd 2:2018 - Migration of certain elements content With reference to ISO 8124-3:2010/Amd 2:2018. Analysis was performed by Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES). Test Item Cd Pb Hg Cr As Sb Se Ba --- Method Detection Limit(mg/kg) 5 5 2 5 2 2 5 5 --- Permissible Limit(mg/kg) 75 90 60 60 25 60 500 1000 --- Test Part Description Result (mg/kg) Comment No.1 Blue silicone ND ND ND ND ND ND ND ND Pass No.2 White silicone ND ND ND ND ND ND ND ND Pass No.3 Green silicone ND ND ND ND ND ND ND ND Pass No.4 Orange silicone ND ND ND ND ND ND ND ND Pass Note: 1. mg/kg = Milligram per kilogram = ppm 2. ND = Not detected (<Method detection limit) 3. Results of soluble elements shown are of the adjusted analytical results. GG) ISO 8124 - 6: 2018 Phthalates Content With reference to ISO 8124 - 6: 2018, analysis was performed by Gas Chromatography/Mass Spectrometry (GC-MS). Test Item DBP BBP DEHP DIBP DINP DNOP DIDP --- Method Detection Limit (%) 0.003 0.003 0.003 0.003 0.010 0.003 0.010 --- Client Limit (%) 0.1 (Sum) Test Part Description No.1 No.2 Note: Blue silicone White silicone Green silicone Orange silicone 0.1 (Sum) --- Result (%) Comment ND ND ND ND ND ND ND Pass ND ND ND ND ND ND ND Pass 1. % = Percentage by weight (w/w) 2. 0.1% = 1000ppm (mg/kg) 3. ND = Not detected (<Method detection limit) The test result of the report is related to the item being tested only. UTL does not verify or be liable to any declare or declaration if the particular/specific item is not tested. Test Report ID: RA0019938(8) Date: 2019-4-11 Sample Photos: *** End of Report *** Page 25 of 25