74000001 - REVISION: AN
*Updates reflected through 11/26/2022
ID
REVISION
80-T-30-4010
8-Nov
80-T-30-6918
Sep-06
80-T-30-6918_BBL_02
Sep-06
80-T-30-6918_BBL_03
Sep-06
80-T-33-3515
May-98
80-T-34-5803
Jun-20
80-T-34-5803_BBL
Dec-20
80-T-35-0014
Mar-13
80-T-35-0020
Apr-19
80-T-35-0090
Apr-05
80-T-35-0095
May-11
80-T-35-0106
Mar-19
80-T-35-0113
Nov-98
80-T-35-0196
Mar-99
80-T-35-2100
Jul-10
80-T-35-2100_BBL_03
Jan-99
80-T-35-2100_BBL_04
Feb-01
80-T-35-2100_BBL_05
Jul-07
80-T-35-2500
Oct-18
80-T-35-5002
May-13
80-T-35-5030
Oct-18
80-T-35-5106
Jul-17
80-T-35-5106_BBL_11
Jul-17
80-T-35-5130
Oct-18
80-T-35-5212
Feb-18
80-T-35-5254
Aug-17
80-T-35-9120
Aug-18
80-T-35-9120_APENDIX_01 Nov-16
80-T-35-9124
Oct-15
80-T-36-1015
Nov-09
80-T-36-1015_BBL_01
Nov-09
80-T-39-0501
Nov-13
A1001.0
B
A1001.0_APPENDIX_A
4.1
A1011
C
A1056
F1
A1079
C
A1094
D
A1095
C
A1130
F
A1500
C
A1501
D
A1502
D
A1503
C
A1504
D
A1505
D
A1506
D
A2406.2
E
A5140
D
ABD 0001
H
ABD 0002
D
AIRBUS - MAINTAINED SPECIFICATION REPORT
DESCRIPTION
MACHINING OF METALLIC COMPONENTS
FINISHING OF METAL COMPONENTS (DEBURRING, CLEANING)
FINISHING OF METAL COMPONENTS (DEBURRING, CLEANING)
FINISHING OF METAL COMPONENTS (DEBURRING, CLEANING)
CHEMICAL MILLING OF TITANIUM AND TITANIUM ALLOYS
WET INSTALLATION OF FASTERNERS
WET INSTALLATION OF FASTERNERS
CLEANING WITH ORGANIC SOLVENTS
ALKALINE CLEANING
RINSING
WATER QUALITY
PICKING OF TITANIUM AND TITANIUM ALLOYS
DESCALING OF TITANIUM AND TITANIUM ALLOYS IN SALT BATHS
ALKALINE PICKLING OF TITANIUM AND TITANIUM ALLOYS
CHROMIC ACID ANODIZING
CHROMIC ACID ANODIZING
CHROMIC ACID ANODIZING
CHROMIC ACID ANODIZING
ANODIZING OF TITANIUM AND TITANIUM ALLOYS
COATING WITH TWO-COMPONENT PRIMER, EP-BASED
COATING WITH TWO-/THREE- COMPONENT WATER-BASED PRIMER
PROCESS SPECIFICATION - COATING WITH PUR-BASED TOP COAT
DATA SHEET 11 - ALEXIT 406-22, COATING WITH PUR-BASED TOP COAT
COATING WITH TWO-/THREE-COMPONENT WATER-BASED TOP COAT
COATING WIRH ANTI-SLIP PAINT
COATING WITH PUR-BASED VARNISH, ABRASION-RESISTANT
COATING WITH PAINTS, GENERAL
COATING WITH PAINTS AND VARNISHES, GENERAL
REWORK OF PAINT COATINGS ON METALLIC AND NON-METALLIC SUBSTRATES
MATERIAL DATA
HEAT TREATMENT OF TITANIUM
PREVENTION OF CORROSION DURING PRODUCTION
GENERAL REQUIREMENTS FOR ARCHIVING
ARCHIVING MANDATORY
REQUIREMENTS FOR AIRBUS SUPPLIERS - TRANSFER OF WORK
IDENTIFICATION & MARKING OF AIRCRAFT ITEMS REQUIREMENTS
STRUCTURES, SYSTEMS INSTALLATION AND CABIN INSTALLATION DEFINITION DOSSIER TOP LEVEL RULES
AIRBUS SUPPLY CHAIN - TOOLING REQIREMENTS
AIRBUS SUPPLY CHAIN - TOOL IDENTIFICATION AND NUMBERING
REQIREMENTS FOR CONTROL AND RELEASE OF OUTSTANDING WORK BY SUPPLIERS
AIRBUS SUPPLIER REQUIREMENTS - GENERAL
AIRBUS SUPPLIER REQUIREMENTS - PLAN AND MANAGE
AIRBUS SUPPLIER REQUIREMENTS - DESIGN AND DEVELOP
AIRBUS SUPPLIER REQUIREMENTS - MAKE
AIRBUS SUPPLIER REQUIREMENTS - BUY
AIRBUS SUPPLIER REQUIREMENTS - DELIVER
AIRBUS SUPPLIER REQUIREMENTS - CUSTOMER SUPPORT
MANAGE CONCESSION
MANAGE REALLOCATION OF CONSTITUENT ASSMEBLIES
GENERAL LIMITS
SURFACE ROUGHNESS
ABD 0003
ABD 0046
ABM 0-0003
ABM 1-7018
ABM 1-7019
ABM 3-1029
ABM 3-1030
ABM 3-2036
ABM 3-4041
ABM 9-9076
ABR 0-0003
ABR 9-0160
ABR 9-0204
ABS 0094
ABS 0112
ABS 0114
ABS 0396
ABS 0648
ABS 0650
ABS 0652
ABS 0653
ABS 0724
ABS 0852
ABS 0920
ABS 0943
ABS 0970
ABS 0975
ABS 1064
ABS 1065
ABS 1133
ABS 1148
ABS 1149
ABS 1236
ABS 1319
ABS 1320
ABS 1321
ABS 1323
ABS 1324
M
D
19
2
1
9
10
6
6
4
43
6
2
2
6
12
18
10
5
20
7
8
2
4
7
12
2
2
4-Jan
9
2
2
3
2
2
8
5
5-Jan
IDENTIFICATION & MARKING OF AIRCRAFT ITEMS DESIGN RULES AND PROCESS CODES
UNITS OF MEASUREMENT
METALLIC MATERIAL SPECIFICATION
ALUMINIUM ALLOY 2014 T4 CLAD SHEET, CLOSE TOLERANCE
ALUMINIUM ALLOY 2014 T6 CLAD SHEET, CLOSE TOLERANCE
ALUMINIUM ALLOY 7010/7050 T7651 PLATE
ALUMINIUM ALLOY 7010/7050 T7651 PLATE
ALUMINIUM ALLOY 7150 T6511 BARS AND EXTRUSIONS
ALUMINIUM ALLOY 7010/7050 T7652 DIE FORGINGS
CARBONSTEEL SPHERICALLY CONDITIONED CUT WIRE FOR SHOTPEENING
APPROVED ALTERNATIVES FOR WITHDRAWN, OBSOLESCENT AND CURRENT NON-METALLIC MATERIAL SPECIFICATIONS
ALUMINIUM OXIDE BLASTING GRIT
CUTTING FLUIDS (COOLANTS) FOR USE ON METALLIC MATERIALS
PIN - TITANIUM ALLOY 100 COUNTERSUNK HEAD BREAK STEM TENSION HEAD
RIVET, BLIND 100 DEG, CSK
BOLT - HEXAGON HEAD, CLOSE TOLERANCE 6AL-4V TITANIUM ALLOY
CLAMP, SADDLE STYLE
GROMMET, GIMBALED AND ADAPTER
AEROSPACE SERIES UNION, BULKHEAD FLANGED
IDENTIFICATION TAPES, FUNCTIONAL IDENTIFICATION OF HYDRAULIC SYSTEM
IDENTIFICATION TAPES, IDENTIFICATION OF FLUID SYSTEM, CIRCUITS AND TUBES COLORED AND TRANSPARENT
LABEL, SELF ADHESIVE
GREASE NIPPLE, HOUSING
ADAPTER - RING LOCKED FITTING - FLARELESS END
UNION - FLANGED, BULKHEAD TO FLARELESS, REDUCER IN-SITU SWAGING
IDENTIFICATION PLATE BAR CODE
P CLAMP
CAP - PROTECTIVE FOR FITTING ENDS 5000 PSI HYDRAULIC SYSTEM
CAP - PROTECTIVE FOR FITTING ENDS = PSI HYDRAULIC SYSTEM
HOOK & LOOP TAPE FOR FIXTATION OF INSULATION PARTS SELF-ADHESIVE AND NON SELF-ADHESIVE FLAME PROPAGATION RESISTANT
NUT-SPANNER
AEROSPACE SERIES WASHER, KEY-SINGLE
HOOK AND LOOP TAPE, SELF-ADHESIVE AND NON SELF-ADHESIVE FOR CABIN APPLICATION
UNION - SWAGED, TUBE TO TUBE FITTING
ELBOW 90 - SWAGED,TUBE TO TUBE FITTING
TEE - SWAGED, TUBE TO TUBE FITTING, NORMAL AND REDUCER
UNION - SWAGED, PIPE END FITTING 2 HOLE FLANGED BULKHEAD WITH FLARELESS END, NORMAL AND REDUCER
UNION - SWAGED, PIPE END FITTING, 3 HOLE FLANGED BULKHEAD WITH FLARELESS END, NORMAL AND REDUCER
ABS 1325
ABS 1352
ABS 1376
ABS 1382
ABS 1383
ABS 1384
ABS 1386
ABS 1391
ABS 1472
ABS 1481
ABS 1509
ABS 1539
ABS 1566
ABS 1707
ABS 1709
ABS 1738
ABS 1738_ICY-CS
ABS 1762
ABS 1771
ABS 1826
ABS 1880
ABS 2093
ABS 2110
ABS 2127
ABS 2228
2
8
2
1
4
Jan-00
1
4
1
1
6
6
2
13
4
2
1
10
8
2
2
1
8
2
3
AEROSPACE SERIES ELBOW 90 - SWAGED, PIPE END FITTING WITH CAPTIVE NUT
ELBOW 90 - WITH 3 HOLES FLANGED BULKHEAD, SWAGED TYPE, NORMAL, REDUCER AND ELONGATED
HYDRAULIC PLUG IN UNIONS TECHNICAL SPECIFICATION
ELBOW 90 DEGREE - SWAGED, SPECIAL PIPE END FITTING, WITH CAPTIVE NUT, REDUCER
ELBOW 90 - SWAGED, PIPE END FITTING 3 HOLE FLANGED BULKHEAD, FLARELESS END
CAP - SPECIAL, 5,080 PSI FOR FLARELESS END AS PER EN6123
SLEEVE - SWAGED, PIPE END FITTING WITH CAPTIVE NUT STRAIGHT AND REDUCER
ELBOW 90 DEGREE - SWAGED, 3 HOLE FLANGED BULKHEAD, FLARELESS, REDUCER
INDENTIFICATION AND MARKING OF HYDRAULIC CIRCUITS DESIGN STANDARD
ELBOW 90 DEGREE - SWAGED, PIPE END FITTING SPECIAL, ELONGATED
STRAPS ASSEMBLY BONDING, ROUND BRAID, CLASS 27 (CROSS SEATION : 13 MM)
L-BRACKET, SLOTTED HOLE
SHAPED WASHER
HOLE GEOMETERIES FOR USE WITH PROTRUDING AND COUNTERSUNK HEAD FASTENERS AND SPECIFIC NUTS
ADHESIVE BONDED BRACKETS TECHNICAL SPECIFICATION
NUT, SELF-LOCKING, HEXAGONAL, TITANIUM
INTERCHANGEABILITY OF NUTS PER ABS1738 AND ABS1826, DIA. -4 & ABOVE
INSPECTION OF PERMANENT AND REMOVABLE FASTENERS AFTER INSTALLATION
REWORK AND REPAIR OF HOLES AND FASTENERS
NUT, SELF-lOCKING, HEXAGONAL, TITANIUM
TEE - SEPARABLE, 3 HOLE FLANGE BULKHEAD, FLARELESS ENDS
DIMENSIONS FOR SPHERICAL PLAIN BEARING HOUSING INCH SERIES
CLAMP - BLOCK
IDENTIFICATION & MARKING OF AIRCRAFT ITEMS - APPLICABLE MARKING MATERIAL
HORN
TWO-WAY INTERCHANGEABILITY BETWEEN HOM D0003004300000
TEE - HYDRAULIC PRESSURE FLIGHT INSTRUMENTATION FOR HIGH ABD LOW PRESSURE, SWAGED, TUBE TO TUBE FITTING
COLD WORKED AND STRESS RELIEVED SEAMLESS TUBES FOR USE IN HYDRAULIC AND FLUID SYSTEMS AT 3 000 PSI (206 BARS) TITANIUM ALLOY Ti-3AI-2.5V DIAMETER .250 INCH <D< 1.000 INCH (6,35MM <D< 25,4 MM)
THICKNESS .016 INCH <a< .051 INCH (0,41 MM <a< 1,30 MM)
EP-PREPREG GLASS FIBRE FABIC PREIMPREGNATED WITH EPOXY RESIN
INTERCHANGEABILITY OF ABS5009K40EP100
PLATES ALUMINIUM ALLOY 2024, 2024HDT AND 2024A CLOSE-TOLERANCE FLATNESS 6.0MM < A < 55.0MM DIMENSIONS
CLAD SHEETS, PLATES AND STRIPS ALUMINIUM ALLOY 2024 GERENAL (NO CODE) AND SPECIFIC (S) TOLERANCES THICKNESS 0,2MM < a < 12,0MM DIMENSIONS
CLAD SHEETS AND STRIPS ALUMINIUM ALLOY 2024 STANDARD SURFACE QUALITY GENERAL (NO CODE) AND SPECIFIC (S) TOLERANCES THICKNESS 0.2MM < A< 6.0MM DIMENSIONS
CARBON FIBRE FABICS REINFORCED POLYPHENYLENE SULPHIDE RESIN (PPS) LAMINATES (CONSOLIDATED PLATES) WITH OR WITHOUT LIGHTNING PROTECTION, WITH OR WITHOUT ANTI-CORROSION PROTECTION
STRUCTURAL MATERIAL
AEROSPACE SERIES PLATES ALUMINIUM ALLOY 7175 CLOSE-TOLERANCE FLATNESS 6.0 MM < A < 100 MM DIMENSIONS
CLAD SHEETS AND PLATES SPECIAL SURFACE AND CHEMICAL MILLING QUALITY ALUMINIUM ALLOY 7475 GENERAL (NO CODE) AND SPECIFIC (S) TOLERANCES THICKNESS 0,8 mm = a = 12,0 mm DEMENSIONS
ABS 2228-01
ABS 2244
1
Jan-00
ABS 5004
ABS 5009
ABS 5009_ICY-CS
ABS 5032
ABS 5043
ABS 5044
Jan-00
15
13
12
5
8
ABS 5045
ABS 5064
ABS 5077
11
5
13
ABS 5125
7
ABS 5141
3
ABS 5145
ABS 5152
ABS 5237
ABS 5255
ABS 5268
ABS 5323
ABS 5324
ABS 5326
ABS 5438
ABS 5440
ABS 5442
ABS 5445
ABS 5452
ABS 5453
ABS 5453_ICY-CS
ABS 5455
ABS 5455_ICY-CS
ABS 5503
ABS 5758
ABS 5797
ABS 5845
AIMS 01-01-000
AIMS 01-04-001
4
4
4
5
2
7
9
6
14
3
4
23
1
3
1
3
1
4
5
5
12
1
1
AIMS 01-04-003
3
AIMS 01-04-009
AIMS 02-04-002
2
3
AIMS 03-02-019
AIMS 03-02-020
7
4
PRECIPITATION HARDENED STAINLESS STEEL 12Cr-11Ni-1.7Ti-1Mo/12Cr-11Ni-2Mo-1.5Al-0.3Ti (CUSTOM 465/MLX 17) SOLUTION TREATED AND PRECIPITATION HARDENED Rm=1655 MPa BAR 6,0MM=a OR D=250,0MM
COPPER ALLOY (CuNi15Sn8) SOLUTION TREATED AND SPINODALLY HARDENED (TX00) Rm > 900 MPa WROUGHT ROUND OR HOLLOW BAR DIAMETER 15MM < D < 200MM MATERIAL SPECIFICATION
ALUMINIUM ALLOY (7040/7050) SOLUTION TREATED, CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T7451) PLATE 75.0 MM < A < 220.0 MM HIGH TOUGHNESS CLOSE TOLERANCE FLATNESS CLOSE TOLERANCE
FLATNESS MATERIAL SPECIFICATION
ALUMINIUM ALLOY (2024) SOLUTION TREATED, CONTROLLED STRETCHED AND ACTUALLY AGED (T351) HIGH DAMAGED TOLERANCE PLATE 12,0 MM < a < 40,0 MM CLOSE-TOLERANCE FLATNESS
AIMS 03-04-024
AIMS 03-04-042
AIMS 03-07-000
AIMS 03-08-003
AIMS 03-09-000
AIMS 03-15-000
AIMS 03-15-002
AIMS 03-18-000
AIMS 03-18-001
AIMS 03-18-004
AIMS 03-18-007
AIMS 03-18-010
AIMS 03-20-000
AIMS 03-20-001
2
2
4
1
5
2
2
10
5
4
5
2
4
5
ALUMINIUM ALLOY (2024) SOLUTION TREATED, CONTROLLED STRETCHED AND NATURALLY AGED (T4) CLAD SHEET 0.8 MM < A < 6.0 MM STANDARD SURFACE QUALITY HIGH FORMABILITY MATERIAL SPECIFICATION
ALUMINUM ALLOY (6061) SOLUTION TREATED AND ARTIFICIALLY AGED (T62), BARE SHEET
GENERAL REQUIREMENTS FOR METALLIC CAST AND FORGED PARTS TECHNICAL SPECIFICATION
ALUMINIUM ALLOY (7085) SOLUTION TREATED, COLD COMPRESSED AND ARTIFICIALLY AGED (T7452/T7454) HIGH STRENGTH FORGING 75,0 MM < a < 280,0 MM
TITANIUM AND TITANIUM ALLOY WROUGHT PRODUCTS GENERAL REQUIREMENTS
TITANIUM AND TITANIUM ALLOYS, SEAMLESS TUBES TECHNICAL SPECIFICATION
TITANIUM ALLOY Ti-3Al-2.5V COLD WORKED AND STRESS RELIEVED SEAMLESS TUBE FOR HIGH PRESSURE SYSTEM 5 080 psi (350 BARS) .250 inch = D = 1.250 inch, 690 MPa = Rm = 1 030 MPa
TITANIUM AND TITANIUM ALLOY WROUGHT PRODUCTS PLATE, SHEET, STRIP, BAR AND SECTION TECHNICAL SPECIFICATION
TITANIUM ALLOY (Ti-6AI-4V) ANNEALED PLATE 6.0 MM < A < 100 MM STANDARD QUALITY MATERIAL SPECIFICATION
TITANIUM ALLOY (Ti-6Al-4V) ANNEALED SHEET 0,3 MM = a = 6,0 MM DAMAGE TOLERANT QUALITY
TITANIUM ALLOY (Ti6AI-4V) B ANNEALED PLATE 6.0 MM < A < 100 MM HIGH DAMAGE TOLERANCE MATERIAL SPECIFICATION
TITANIUM ALLOY (Ti-6AI-4V) ANNEALED ROUND BAR DIAMETER 6 MM < D = 200 MM
TITANIUM AND TITANIUM ALLOYS FORGED PARTS TECHNICAL SPECIFICATION
TITANIUM ALLOY (Ti6AI-4V) B ANNEALED FORGING A < 200MM MATERIAL SPECIFCATION
AEROSPACE SERIES PLATES TITANIUM ALLOY Ti6AI-4V NORMAL AND SPECIAL TOLERANCE FLATNESS (CODES N AND S) THICKNESS 6.0MM < A < 100MM DIMENSIONS
COLD WORKED AND STRESS RELIEVED SEAMLESS TUBES FOR USE IN HYDRAULIC AND FLUID SYSTEMS AT 5 080 PSI (350 BARS) TITANIUM ALLOY Ti-3AI-2.5V DIAMETER .250 INCH <D< 1.250 INCH (6,35 MM <D< 31,75 MM)
THICKNESS .025 INCH <a< .098 INCH (0,64 MM <a< 2,49 MM)
ROUND, SEAMLESS, DRAWIN TUBE FOR USE IS HYDRAULIC SYSTEMS AT 220 psi ALLUMINIUM ALLOY 6061 DIAMETER 1 ¼ inch = D = 1 ½ inch (31,75mm = D = 38,1mm) THICKNESS a = .035 inch (a= 0,89 mm) DIMENSIONS
HOLLOW BAR COPPER ALLOY (Cu15Ni8sN) THICKNESS 7mm=a=30mm, 50 mm=D=200mm
AEROSPACE SERIES PLATES ALUMINIUM ALLOY 7150 T7751 AND 7099 / 7449 T7651 CLOSE-TOLERANCE FLATNESS 20.0 MM < A < 150.0 MM DIMENSIONS
AEROSPACE SERIES PLATES ALUMINIUM ALLOY 2050 CLOSE FLATNESS TOLERANCE 12.0MM < A < 165.0MM DIMENSIONS
AEROSPACE AERIES BAR PRECIPITATION HARDENED STAINLESS STEEL 12Cr-11Ni-1.7Ti-1Mo/12Cr-11Ni-2Mo-1.5AI-0.3Ti 6.0 MM < D < 250 MM DIMENSIONS
AEROSPACE SERIES PLATES ALUMINIUM ALLOY 7010/7050 CLOSE-TOLERANCE FLATNESS 6.0 MM < A < 200.0 MM DIMENSIONS
AEROSPACE SERIES PLATES ALUMINIUM ALLOY 7040/7050 HIGH TOUGHNESS CLOSE-TOLERANCE FLATNESS 75 MM < A < 220 MM DIMENSIONS
SHEETS TITANIUM ALLOY (Ti-6Al-4V) NORMAL AND SPECIAL FLATNESS TOLERANCES (CODE N AND S) THICKNESS 0,3mm = a = 6,0mm DEMENSIONS
AEROSPACE SERIES SPECIAL H-SECTION, EXTRUDED ALUMINIUM ALLOY C460/2196 WITH PERIPHERAL COARSE GRAIN CONTROL 1.5 MM < A < 25.0 MM
PLATES HEAT RESISTING NICKEL ALLOY (NiCr19Fe18Nb(INCONEL718)) THICKNESS 6,0MM < a < 30,0MM
Round Bar Precipitation Hardened Stainless Steel
SPECIAL - ANGULAR- T -SECTION, EXTRUDED ALUMINIUM ALLOY 7175 1,2 MM < a < 28,6 MM DIMENSIONS
BARE SHEETS AND STRIPS IN STANDARD SURFACE QUALITY ALUMINUM ALLOY 6061
ROUND BAR TITANIUM ALLOY (Ti-6AI-4V) ANNEALED DIAMETER 6 MM < D< 200 MM DIMENSIONS
INTERCHANGEABILITY OF LN9297H
AEROSPACE SERIES ROUND BARS PRECIPITATION HARDENING STAINLESS STEEL (X5CrNiCu15-5(15-5PH)) NORMAL AND SPECIAL DIAMETER TOLERANCES (CODES N AND S) DIAMETER 6.0 MM < D < 250.0 MM
INTERCHANGEABILITY OF AIMS01-04-003 & AIMS01-04-001
AEROSPACE SERIES CLAD SHEETS ALUMINIUM ALLOY 2024 HIGH FORMABILITY STANDARD SURFACE QUALITY THICKNESS 0.8 MM < A < 6MM DIMENSIONS
AEROSPACE SERIES SPECIAL L-SECTION, EXTRUDED TITANIUM ALLOY Ti-6AI-4V 9.5 MM < A < 19.0 MM DIMENSIONS
GENERAL MANUFACTURING TOLERANCES FOR NON-METALLIC COMPOSITE COMPONENTS OF "NEW GENERATION COMPOSITE AIRCRAFT"
H-SECTION TITANIUM ALLOY TI-6AI-4V 8,0 mm <A< 20,0 mm DIMENSIONS
STEEL WROUGHT PRODUCTS GENERAL REQUIREMENTS
PRECIPITATION HARDENED STAINLESS STEELl
AIMS AIRBUS MATERIAL SPECIFICATION PRECIPITATION HARDENED STAINLESS STEEL (X5CrNiCu15-5(15-5PH)) SOLUTION TREATED AND PRECIPITATION HARDENED 1070 MPa < Rm < 1200 MPa BAR 6.0 MM < A OR D < 250.0
MM MATERIAL SPECIFICATION
AIMS 03-20-002
AIMS 04-01-001
AIMS 04-04-000
AIMS 04-04-001
5
4
7
3
TITANIUM ALLOY (Ti-6Al-4V) ANNEALED FORGING, A = 150MM
THERMOPLASTIC MATERIAL - LOW HEAT RELEASE PAINTS FOR AIRCRAFT STRUCTURES
CORROSION INHIBITING PRIMER
AIMS 04-04-002
AIMS 04-04-004
AIMS 04-04-009
AIMS 04-04-012
AIMS 04-04-014
AIMS 04-04-018
AIMS 04-04-019
AIMS 04-04-021
AIMS 04-04-022
AIMS 04-04-023
AIMS 04-04-029
AIMS 04-04-038
AIMS 04-04-040
AIMS 04-04-041
AIMS 04-04-042
AIMS 04-04-045
AIMS 04-05-000
AIMS 04-05-001
AIMS 04-05-005
AIMS 04-05-006
AIMS 04-05-012
AIMS 04-05-014
AIMS 04-16-002
AIMS 10-13-000
AIMS 08-01-001
AIMS 09-04-000
AIMS 09-04-001
AIMS 09-06-002
AIMS 09-07-000
2
2
3
2
2
4
3
3
1
3
1
1
2
1
1
1
4
4
6
3
4
1
4
5
2
2
2
2
2
NON CORROSION INHIBITING PRIMER
FUEL TANK COATING
VARNISH TOUCH-UP
EXTERNAL PAINT SYSTEM: WASH PRIMER + PRIMER + TOP COAT
EXTERNAL PAINT SYSTEM : PRIMER + INTERMEDIATE COAT + TOP COAT
HIGH PERFORMANCE. SEALANT BEAD PROTECTION COATING.
HIGH TEMPERATURE RESISTANT PRIMER
HIGH TEMPERATURE RESISITANT PAINT SYSTEM: PRIMER + TOP COAT
CLEAR COAT FOR PROTECTION OF INTERNAL LABELS AND MARKINGS
UV RESISTANT EXTERNAL VARNISH MATERIAL SPECIFICATION
<CORROSION INHIBITING DRY FILM LUBRICANTS OF CURING UP TO 120 C> MATERIAL SPECIFICATION
CORROSION INHIBITING PRIMER FOR APPLICATION ON ALL PRE-TREATMENTS MATERIAL SPECIFICATION
INTERNAL PAINT SYSTEM - PRIMER + TOPCOAT FOR APPLICATION ON ALL PRETREATMENTS MATERIAL SPECIFICATION
CORROSION INHIBITING FUEL TANK PAINT SYSTEM -- PRIMER + TOPCOAT FOR APPLICATION ON ALL PRETREATMENTS
CORROSION INHIBITING FUEL TANK PRIMER FOR APPLICATION ON ALL PRETREATMENTS
INTERNAL PAINT SYSTEM - NON-INHIBITING PRIMER + TOPCOAT FOR APPLICATION ON CFRP ( AND NON-CORROSION-SENSITIVE METALS) MATERIAL SPECIFICATION
SEALANT TECHNICAL SPECIFICATION
SEALANTS - GENERAL PURPOSE MATERIAL SPECIFICATION
NON HARDENING JOINTING COMPOUNDS MATERIAL SPECIFICATION
SEALANTS - LOW ADHESION MATERIAL SPECIFICATION
SEALANTS - FUEL TANK, HIGH PERFORMANCE MATERIAL SPECIFCATION
SEALANTS GENERAL PURPOSE, LIGHTWEIGHT MATERIAL SPECIFICATION
ADHESIVE FILM MARKINGS
AIRBUS MATERIAL SPECIFICATION EXTERNAL DECORATION ADHESIVE FILM TECHNICAL SPECIFICATION
AIMS AIRBUS INDUSTRIE MATERIAL SPECIFICATION CARBON FIBRE FABRIC (PLAIN WEAVE, 193 G/M2) WITH EPOXY REISN FOR WET LAY-UP NON STRUCTURAL APPLICATION
AQUEOUS CLEANING AGENTS TECHNICAL SPECIFICATION
AQUEOUS CLEANING AGENTS
GREASE, GENERAL PURPOSE, AIRFRAME, LOW TEMPERATURE RANGE, LITHIUM THICKENED MATERIAL SPECIFICATION
ANTI-FRETTING COROSION COMPOUND TECHNICAL SPECIFICATION
AIMS 09-07-001
AIMS 09-08-001
AIMS 09-08-004
AIMS 10-04-030
AIMS 10-07-001
AIMS 10-07-004
AIMS 12-10-000
AIMS 12-10-001
AIMS 30-24-000
2
2
3
1
6
2
2
2
2
AIMS 30-24-001
AIMS04-04-033
AIMS04-04-037
AIPI 01-01-004
AIPI 01-02-003
AIPI 01-02-008
AIPI 01-02-017
AIPI 01-02-019
AIPI 01-02-022
AIPI 01-02-029
AIPI 01-03-004
AIPI 02-01-003
AIPI 02-01-004
AIPI 02-02-002
AIPI 02-02-003
AIPI 02-02-004
AIPI 02-02-010
AIPI 02-03-004
AIPI 02-04-001
AIPI 02-04-007
1
Jan-00
2
A5
A1
A7
A4
A2
A3
A2
A2
A4
2
2
A1
A4
A2
1
A5
A1
ANTI-FRETTING CORROSION COMPOUND MATERIAL SPECIFICATION
TEMPORARY PROTECTIVES - TYPE 1
IMPROVED DURABILITY CORROSION PREVENTION COMPOUNDS
TWO-PART EPOXY BASED REACTION ADHESIVE, ROOM TEMPERATURE CURING (TEMPERATURE REANGE FROM -55 C TO 135 C)
EPOXY PASTES, LIQUID SHIMS
AIMS AIRBUS MATERIAL SPECIFICATION NON-STRUCTURAL ADHESIVE - EPOXY PASTE MATERIAL SPECIFICATION
CUTTING FLUIDS FOR MACHINING AND DRILLING
CUTTING FLUIDS FOR MACHINING OF METALLIC MATERIALS
ALUMINIUM AND ALUMINIUM ALLOYS WROUGHT PRODUCTS DRAWN TUBES
ALUMINIUM ALLOY (6061), SOLUTION TREATED, AND ARTIFICALLY AGED (T6) HYDRAULIC SEAMLESS DRAWN TUBE FOR SUCTION LINES USED 15 BARS (220 PSI), 31,75 mm = D = 38,1 mm (1 1/4" = D = 1 1/2") MATERIAL
SPECIFICATION
CHROMATE FREE EXTERNAL EXTERNAL PAINT SYSTEM: PRIMER + BASECOAT + CLEARCOAT ON BASIC PRIMER
CHROMATE FREE EXTERNAL PAINT SYSTEM: PRIMER + INTERMEDIATE COAT + BASECOAT + CLEARCOAT ON BASIC PRIMER
INSTALLATION OF SOLID RIVETS
PREPARATION OF HOLES IN METALLIC MATERIALS FOR FASTENING
TIGHTENING TORQUES FOR STRUCTURAL FASTENERS
GENERAL ASSEMBLY AND INSTALLATION OF FASTENERS
INSTALLATION OF BUSHES SHRINK AND PRESS FIT
INSTALLING THREADED CYLINDRICAL FASTENERS
TORQUE, TIGHTENING TORQUE OF SCREWS, BOLTS AND NUTS FOR ASSEMBLY OF BRACKETS
INSTALLATION OF HELOCOIL THREADED INSERT
TARTARIC SULPHULIC ANODIZING OF ALUMINIUM ALLOYS (TSA)
ANODIZING OF TITANIUM AND ITS ALLOYS
DRY BLASTING
WET BLASTING
SHOT PEENING FOR FATIGUE ENHANCEMENT OF METAL PARTS
INSTALLATION OF BUSHES BY COLD EXPANSION PROCESS IN METALLIC MATERIALS
DEPOSITION OF ALUMINIUM BY THE THERMAL SPRAY PROCESS
APPLICATION OF CORROSION PREVENTATIVE TEMPORARY PROTECTION COMPOUNDS
PHYSICAL VAPOUR DEPOSITION FOR WC-C: H COATING
AIPI 02-05-001
AIPI 02-05-005
AIPI 03-01-012
AIPI 03-01-013
AIPI 03-01-015
AIPI 03-02-019
AIPI 03-03-006
AIPI 03-03-012
AIPI 03-06-002
AIPI 03-06-004
AIPI 03-06-006
AIPI 03-06-007
AIPI 03-06-008
AIPI 03-06-009
AIPI 03-06-014
AIPI 03-06-015
AIPI 03-06-016
AIPI 03-07-002
AIPI 03-08-003
AIPI 03-09-003
AIPI 03-10-001
AIPI 03-10-002
AIPI 03-10-005
AIPI 03-11-001
AIPI 03-11-002
AIPI 03-11-003
AIPI 04-02-001
AIPI 05-02-003
AIPI 05-02-009
AIPI 05-02-011
AIPI 05-03-005
AIPI 05-03-006
AIPI 05-05-001
AIPI 05-05-003
AIPI 05-05-004
AIPI 05-05-005
AIPI 05-05-006
AIPI 05-05-008
AIPI 05-05-009
AIPI 06-01-004
AIPI 06-02-002
AIPI 06-02-009
AIPI 07-01-001
AIPI 07-01-004
AIPI 07-01-006
AIPI 07-01-017
AIPI 07-06-002
AIPI 07-06-007
AIPI 08-02-003
AIPI 08-03-001
AIPI 09-01-002
AIPI 09-01-003
AIPI 09-02-005
AIPI 09-03-001
AIPI 09-03-002
AIPI 09-04-001
AIPI_03-06-015
AIPS 00-00-006
AIPS 00-00-008
AIPS 00-00-008_ICY-CS
AIPS 00-00-009
AIPS 01-01-004
AIPS 01-02-003
2
2
A8
A3
A4
A4
2
A2
A2
A2
A4
A8
A5
A5
A2
A3
A3
A3
A8
1
A2
2
A2
A8
A2
A3
A3
A2
A3
A2
2
A1
A6
A6
A5
A2
A3
2
A6
A3
A3
A1
A8
22
B3
A7
A5
A2
1
A2
A5
A5
A4
2
1
A2
A2
17
3
3
4
7
8
CHEMICAL CONVERSION COATING
AIRBUS PROCESS INSTRUCTION PASSIVATION OF CORROSION RESISTANT STEEL
EXTERNAL SWAGING OF FITTINGS ON 5080 PSI TITANIUM TUBES
EXTERNAL SWAGING OF SLEEVES ON 5080PSI TITANIUM TUBES
BLANKING OF PIPES, HOSES AND COMPONENTS
MANUFACTURE OF MONOLITHIC PARTS WITH THERMOSET PREPEG MATERIALS
WATER JET CUTTING
INSTALLATION OF BEARINGS, SPHERICAL BEARINGS AND BUSHES BY SWAGING
LOCKING USING TAB WASHERS
LOCKING USING ANAEROBIC MATERIALS
INTERNAL EXPANDER SWAGED PIPE COUPLINGS
EXTERNAL RADIAL SWAGING OF FITTINGS
INSTALLATION OF RIGID HYDRAULIC PIPES AND FLEXIBLE HOSES
SHIM FOR ASSEMBLY
LOCKING BY SPLIT PIN
TORQUE TIGHTENING OF A380 AND A350 HYDRAULIC CONNECTIONS
INSTALLATION OF RING LOCKED PLUG IN UNION
MACHINING OF FIBRE REINFORCED PLASTIC (FRP) COMPONENTS)
REWORK OF STRUCTURES MANUFACTURED FROM COMPOSITE MATERIALS
SHEAR-CUTTING OF METALLIC SHEETS AND SECTIONS
RECTIFICATION OF METALLIC MATERIALS BY SHOT PEENING
RECTIFICATION OF METALLIC MATERIALS BY ROLL FORMING
FORMING OF ALUMINIUM ALLOYS
MACHINING METALS BY MECHANICAL ACTION
PRECISION GRINDING
DEBURRING AND MANUAL REWORK OF METALLIC COMPONENTS
HEAT TREATMENT OF PARTS MANUFACTURED FROM TITANIUM AND TITANUM ALLOYS
APPLICATION OF EXTERNAL PAINT SYSTEMS
APPLICATION OF STRUCTURAL PAINTS
REWORK OF PAINTS ON METALLIC AND NON-METALLIC STRUCTURAL PARTS
CHEMICAL STRIPPING OF AIRCRAFT EXTERNAL PAINT SYSTEM AND REPAINTING
COATING REMOVAL BY MEANS OF A LASER TECHNIQUE FOR PREPARATION OF ELECTRICAL BONDING CONNECTIONS
SEALING OF AIRCRAFT STRUCTURE
SURFACE PROTECTION OF FASTENERS AND SEALANTS BY APPLICATION OF PAINT
WET INSTALLATION OF FASTENERS
PROCESS FOR THE MANUFACTURE OF FORM-IN-PLACE SEALS USING SEALANT
APPLICATION OF NON HARDENING JOINTING COMPOUNDS
APPLICATION OF LOW ADHESION SEALANT
PRESERVATION OF CUT EDGES OF CARBON FIBRE COMPOSITE PARTS TO PREVENT GALVANIC CORROSION ON ATTACHED METAL PARTS
MECHANICAL SURFACE PREPARATION OF NON STRUCTURAL ADHEREND PRIOR TO ADHESIVE BONDING
NON STRUCTURAL ADHESIVE BONDING
ADHESIVE TAPE BONDING
MANUFACTURING AND INSTALLATION OF CABLE HARNESSES
TIGHTENING PROCEDURE FOR ELECTRICAL EQUIPMENT
ELECTRICAL BONDING
ASSEMBLY PROCESS OF ADHESIVE BONDED BRACKETS
IDENTIFICATION AND MARKING OF ELECTRICAL INSTALLATIONS
INSTALLATION AND MARKING PROCESS OF LABELS ABS0724, ABS0970, ASNE0470 AND NSA9117
IDENTIFICATION BY BAG AND TAG
ELECTROCHEMICAL MARKING
CLEANING WITH LIQUID NON AQUEOUS AGENTS
CLEANING WITH AQUEOUS CLEANING AGENTS
PICKLING OF TITANIUM AND ITS ALLOYS
CHEMICAL MILLING OF ALUMINIUM AND ALUMINIUN ALLOYS
CHEMICAL MILLING OF TITANIUM ALLOYS
SURFACE PREPARATIONS PRIOR TO EXTERNAL PAINT APPLICATION
TORQUE TIGHTENING OF A380 AND A350 HYDRAULIC CONNECTIONS
REFERENCE LIST AIRBUS MANUFACTURING PROCESS REFERENTIALS
METALLIC MATERIAL INTERCHANGEABILITY
METALIIC MATERIALS INTERCHANGEABILITIES
LIST OF AUTHORIZED AUXILIARY MATERIALS FOR COMPOSITE MANUFACTURING
INSTALLATION OF SOLID RIVETS
PREPARATION OF HOLES IN METALLIC MATERIAL FOR FASTENING
AIPS 01-02-005
AIPS 01-02-008
AIPS 01-02-013
AIPS 01-02-014
AIPS 01-02-016
AIPS 01-02-017
AIPS 01-02-018
AIPS 01-02-019
AIPS 01-02-022
AIPS 01-02-029
AIPS 01-03-004
AIPS 02-01-001
AIPS 02-01-003
AIPS 02-01-004
AIPS 02-01-006
AIPS 02-02-001
AIPS 02-02-002
AIPS 02-02-003
AIPS 02-02-004
AIPS 02-02-005
AIPS 02-02-010
AIPS 02-02-011
AIPS 02-02-012
AIPS 02-03-001
AIPS 02-03-003
AIPS 02-03-004
AIPS 02-03-005
AIPS 02-03-006
AIPS 02-03-007
AIPS 02-03-008
AIPS 02-03-009
AIPS 02-04-001
AIPS 02-04-002
AIPS 02-04-006
AIPS 02-04-007
AIPS 02-04-009
AIPS 02-05-001
AIPS 02-05-005
AIPS 03-01-010
AIPS 03-01-011
AIPS 03-01-012
AIPS 03-01-013
AIPS 03-01-015
AIPS 03-02-019
AIPS 03-03-001
AIPS 03-03-002
AIPS 03-03-006
AIPS 03-03-012
AIPS 03-03-013
AIPS 03-06-002
AIPS 03-06-003
AIPS 03-06-004
AIPS 03-06-006
AIPS 03-06-007
AIPS 03-06-008
AIPS 03-06-009
AIPS 03-06-014
AIPS 03-06-015
AIPS 03-06-016
AIPS 03-06-017
AIPS 03-07-002
AIPS 03-08-003
AIPS 03-09-003
12
15
5
3
8
6
NC
5
4
6
4
2
3
2
3
3
2
4
8
4
3
3
NC
3
3
2
2
2
5
4
2
6
5
3
6
4
3
2
5
4
4
3
4
13
5
3
4
6
1
6
8
3
8
10
10
3
6
7
1
3
7
7
2
PREPARATION OF HOLES IN FIBRE REINFORCED PLASTIC (FRP) AND MIXED (FRP/METAL) ASSEMBLIES FOR FASTENING
TORQUE TIGHTENING OF SCREWS, BOLTS AND NUTS
INSTALLATION OF BLIND BOLTS AND BLIND RIVETS "PULL-TYPE"
INSTALLATION OF COLD EXPANDED RETAINERS
INSTALLATION OF RIVTELESS NUTPLATES
GENERAL ASSEMBLY AND INSTALLATION OF FASTENERS
GENERAL REQUIREMENTS - FASTENERS
INSTALLATION OF BUSHES, PINS, BEARING HOUSINGS AND SHAFTS SHRINK AND PRESS FIT
INSTALLATION OF PARALLEL SHANK THREADED FASTENERS
TORQUE, TIGHTENING TORQUE OF SCREWS, BOLTS AND NUTS FOR ASSEMBLY OF BRACKETS
INSTALLATION OF HELICOIL THREADED INSERTS
CHROMIC ACID ANODIZING OF ALUMINIUM ALLOYS
TARTARIC SULPHURIC ANODISING OF ALUMINIUM ALLOYS FOR CORROSION PROTECTION AND PAINT PRE-TREATMENT
ANODIZING OF TITANIUM AND ITS ALLOY
PHOSPHORIC SULPHURIC ANODISING (PSA) OF ALUMINIUM ALLOYS PRIOR TO STRUCTURAL BONDING
SHOT PEENING FORMING OF METAL PARTS
DRY BLASTING
WET BLASTING
SHOT PEENING FOR FATIGUE ENHANCEMENT OF METAL PARTS
COLD EXPANSION IN METALLIC MATERIALS - SPLIT SLEEVE PROCESS
INSTALLATION OF BUSHES BY COLD EXPANSION PROCESS IN METALLIC MATERIALS
LASER SHOCK PEENING OF METAL PARTS
CHROMATEFREE CHEMICAL CONVERSION COATING
APPLICATION OF THERMAL SPRAY COATINGS WC-CO AND WC-CO-CR
PHYSICAL VAPOR DEPOSITION OF TITANIUM NITRIDE FOR COATING OF NICKEL ALLOYS, STAINLESS STEELS AND TITANIUM ALLOYS
DEPOSITION OF ALUMINIUM BY THE THERMAL SPRAY PROCESS
DEPOSITION OF ZINC BY THE THERMAL SPRAY PROCESS
ION VAPOR DEPOSITION (IVD) OF ALUMINIUM
APPLICATION OF THERMALLY SPRAYED COBALT CHROMIUM MOLYBDENUM COATINGS
COPPER ALUMINIUM IRON ALLOY COATING OF TITANIUM AND STAINLESS STEEL ALLOYS BY FLAME THERMAL SPRAYING
COPPER NICKEL INDIUM ALLOY COATING OF TITANIUM AND STAINLESS STEEL ALLOYS BY PLASMA THERMAL SPRAYING
APPLICATION OF CORROSION PREVENTATIVE TEMPORARY PROTECTIVE COMPOUNDS
ELECTROLYTIC CADMIUM PLATING
ELECTROLYTIC ZINC-NICKEL PLATING
WC-C:H COATING BY PHYSICAL VAPOUR DEPOSITION
APPLICATION OF CORROSION INHIBITING SOLID FILM LUBRICANT
CHEMICAL CONVERSION COATING
PASSIVATION OF CORROSION RESISTANT STEEL
MANUFACTURING OF PIPES
INTERNAL ROLLER SWAGED PIPE COUPLINGS
EXTERNAL SWAGING OF FITTINGS ON 5080 PSI TITANIUM TUBES
EXTERNAL SWAGING OF SLEEVES ON 5.080 PSI TITANIUM TUBES
BLANKING OF PIPES, HOSES AND COMPONENTS
MANUFATURE OF MONOLITHIC PARTS WITH THERMOSET PREPREG MATERIALS
REWORK OF SCRATCHES IN ALUMINIUM ALLOYS ON EXTERNAL SURFACES
DIMPLING
WATER JET CUTTING
INSTALLATION OF BEARINGS, SPHERICAL BEARINGS AND BUSHES BY SWAGING
EXTERNAL SWAGED PIPE SOCKETS
LOCKING USING TAB WASHERS
LOCKING, USING WIRE
LOCKING USING ANAEROBIC MATERIALS
INTERNAL EXPANDER SWAGED PIPE COUPLINGS
EXTERNAL SWAGED TUBE FITTINGS
INSTALLATION OF RIGID HYDRAULIC PIPES AND FLEXIBLE HOSES
SHIMMING FOR ASSEMBLY
LOCKING BY SPLIT PIN
TORQUE TIGHTENING OF A380 AND A350 HYDRAULIC CONNECTIONS
INSTALLATION OF RING LOCKED PLUG IN UNION
INSTALLATION OF METALLIC RODS
MACHINING OF FIBRE REINFORCED PLASTIC (FRP) COMPONENTS
REWORK AND REPAIR OF STRUCTURES MANUFACTURED FROM COMPOSITE MATERIALS (LAMINATES AND SANDWICH)
SHEAR-CUTTING OF METALLIC SHEETS AND SECTIONS
AIPS 03-10-001
AIPS 03-10-002
AIPS 03-10-005
AIPS 03-10-010
AIPS 03-10-011
AIPS 03-11-001
AIPS 03-11-002
AIPS 03-11-003
AIPS 04-00-000
AIPS 04-01-001
AIPS 04-02-001
AIPS 04-03-001
AIPS 05-02-003
AIPS 05-02-009
AIPS 05-02-011
AIPS 05-03-005
AIPS 05-03-006
AIPS 05-03-007
AIPS 05-05-001
AIPS 05-05-003
AIPS 05-05-004
AIPS 05-05-005
AIPS 05-05-006
AIPS 05-05-008
AIPS 05-05-011
AIPS 06-01-004
3
3
4
NC
Jan-00
12
5
3
2
4
5
2
5
6
6
2
2
1
11
3
6
4
4
3
1
3
RECTIFICATION OF METALLIC MATRIALS BY SHOT PEENING
RECTIFICATION OF METALLIC MATERIALS BY ROLL FORMING
FORMING OF ALUMINIUM ALLOYS - GENERAL REQUIREMENTS
LASER SHOCK PEENING FOR FORMING
HARD METAL FORMING - GENERAL REQUIREMENTS
MACHINING OF METALLICS
PRECISION GRINDING
DEBURRING AND MANUAL REWORK OF METALLIC COMPONENTS
HEAT TREATMENT OF METALLIC MATERIALS - GENERAL
HEAT TREATMENT OF ALUMINIUM ALLOY PARTS
HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS
HEAT TREATMENT OF STEELS
APPLICATION OF EXTERNAL PAINT SYSTEMS
APPLICATION OF STRUCTURAL PAINTS
REWORK OF PAINTS ON METALLIC AND NON-METALLIC STRUCTURAL PARTS
CHEMICAL STRIPPING OF AIRCRAFT EXTERANL PAINT SYSTEM AND REPAINTING
COATING REMOVAL BY MEANS OF A LADET- TECHNIQUE FOR PREPARATION OF ELECTRICAL BONDING CONNECTIONS
STRIPPING OF ELEMENTARY PARTS BY BLASTING
SEALING OF AIRCRAFT STRUCTURE
SURFACE PROTECTION OF FASTENERS AND SEALANTS BY APPLICATION OF PAINT
WET INSTALLATION OF FASTENERS
PROCESS FOR THE MANUFACTURE OF FORM-IN-PLACE SEALS USING SEALANT
APPLICATION OF NON HARDENING JOINTING COMPOUNDS
APPLICATION OF LOW ADHESION SEALANTS
EDGE PROTECTION OF CARBON FIBRE COMPOSITE PARTS
MECHANICAL SURFACE PREPARATION OF NON-STRUCTURAL ADHERANCE PRIOR TO ADHESIVE BONDING
AIPS 06-01-008
AIPS 06-02-002
AIPS 06-02-007
AIPS 06-02-009
AIPS 07-01-001
AIPS 07-01-004
AIPS 07-01-006
AIPS 07-01-017
AIPS 07-05-042
AIPS 07-06-002
AIPS 07-06-007
AIPS 08-01-001
AIPS 08-01-002
AIPS 08-01-003
AIPS 08-02-002
AIPS 08-02-003
AIPS 08-02-004
AIPS 08-02-005
AIPS 08-02-006
AIPS 08-03-001
AIPS 08-03-002
AIPS 09-01-002
AIPS 09-01-003
AIPS 09-01-014
AIPS 09-02-005
AIPS 09-03-001
AIPS 09-03-002
AITM 1-0033
AITM 1-0039
AITM 1-0070
AITM 2-0024
AITM 6-0011
AITM 6-0012
AITM 6-1001
AITM 6-1002
AITM 6-2001
AITM 6-3006
1
4
7
2
12
36
11
7
6
8
4
1
3
3
1
1
3
4
2
3
3
5
4
2
3
2
2
3
1
2
2
10
9
12
2
5
2
SURFACE PREPARATION OF ADHERENDS FOR SILICONE BASED ADHESIVES/SEALANTS
NON-STRUCTURAL ADHESIVE BONDING
BONDING METAL/METAL PARTS STRUCTURAL BONDING PROCESS
ADHESIVE TAPE BONDING
MANUFACTURING AND INSTALLATION OF CABLE HARNESESS
TIGHTENING PROCEDURE FOR ELECTRICAL STANDARD PART
ELECTRICAL BONDING
ASSEMBLY PROCESS OF ADHESIVE BONDED BRACKETS
INSTALLATION OF CABLE BRACKETS AND SUPPORTS
IDENTIFICATION AND MARKING OF ELECTRICAL INSTALLATIONS
INSTALLATION AND PROTECTION OF LABELS
MARKING BY IMPRESS STAMPING MACHINE
MARKING BY VIBRO-ENGRAVING
MARKING BY LOW STRESS IMPRESS STAMPING MACHINE
INSTALLATION OF IDENTIFIABLE LABELS IN HYDRAULIC FLUID AREAS
IDENTIFICATION BY BAG AND TAG
PRINTING AND INSTALLATION OF THERMAL ACTIVATED IDENTIFICATION TAPES ABS0652 AND ABS0653
APPLICATION OF MARKINGS FOR EXTERNAL AIRCRAFT SURFACES
MANUFACTURING AND MARKING OF LABELS
ELECROCHEMICAL MARKING
PERMANENT MARKING WITH INK
CLEANING WITH LIQUID NON AQUEOUS AGENTS INCLUDING VAPOUR PHASE
CLEANING WITH AQUEOUS CLEANING AGENTS
FINAL CLEANING OF HYDRAULIC PIPES
PICKLING OF TITANIUM AND ITS ALLOYS
CHEMICAL MILLING OF ALUMINIUM AND ALUMINIUM ALLOYS
CHEMICAL MILLING OF TITANIUM ALLOYS
SEALANTS: DETERMINATION OF THE CURING RATE OF SEALING MATERIALS
BENCH PRESSURE TESTING OF HYDRAULIC PARTS
SURFACE ROUGHNESS MEASUREMENTS USING SURFACE CONTACT STYLUS METHOD
DETERMINATION OF ADHESION BY WET TAPE TESTING
NON DESTRUCTIVE INSPECTION OF COMPOSITE PARTS
AITM AIRBUS TEST METHOD FOR INSPECTION PROCESSES REFERENCE STANDARDS FOR NON-DESTRUCTIVE INSPECTION METHODS ON FIBRE COMPOSITES
PENETRANT INSPECTION
SMEARING DETERMINATION
MAGNETIC PARTICLE INSPECTION
FOR THE ETCH INSPECTION OF HIGH STRENGTH STEEL COMPONENTS
AITM 6-4002
AITM 6-4016
AITM 6-6006
AITM 6-9008
AMCD 01
AMCD 02
AMCD 03
AP2003
AP2027.1
AP2027.2
AP2027.5
AP2027.6
AP2027.7
AP2104
AP2190.2
AP2653
AP5024-MAIN MODULE
AP5024.2
AP5024.3
AP5024.6
AP5140
AP5374
AP5866
AP5928
AS41089-90
AS9120
ASI
ASNA2001
ASNA2042
ASNA2045
ASNA2069
ASNA2101
ASNA2327
ASNA2331
ASNA2529
ASNA2531
ASNA2536
ASNA2629
ASNA3050
ASNA3098
ASNA3288
ASNA3311
ASNA3406
ASNA3752
ASNA3759
ASNA4247
ASNA4248
ASNA5117
ASNE0089
ASNE0470
DAN 1195
DAN 1195-01_ICY-CS-001
DAN 369
DAN 5135
M1017
M1019
M1056
M1227
M20099
M20144
M2435
MBBN 591
NAS 1291
7
3
3
4
8
55
16
E
F
C
D
D
C
R
D
J
A
E
B
C
E
C
E
C
2
B
V
M
M
L
AU
F
B
K
M
H
B
S
P
D
D
G
AD
J
A
B
H
N
J
4.2013
1
9/2004
4
A1
A2
B
B
B
G
C
2
14
AITM AIRBUS TEST METHOD FOR INSPECTION PROCESSES ULTASONIC THROUGH TRANSMISSION INSPECTION OF FIBRE PLASTICS
THICKNESS MEASUREMENT OF METALS BY ULTRASONIC PULSE-ECHO TECHNIQUE
MEASURING COATING THICKNESS BY EQUIPMENTS OF THE MAGNETIC AND EDDY CURRENT TYPE
ELECTRICAL BONDING CONNECTIONS RESISTANCE MEASUREMENT
THE AIRBUS UK MATERIALS AND PROCESSES SPECIFICATION SYSTEM MASTER CONTROL DOCUMENT
SUBJECT INDEX OF AIRBUS UK MATERIALS AND PROCESS SPECIFICATIONS
INDEX OF APPROVED AIRBUS UK REPLACEMENT SPECIFICATIONS
DOCUMENT RETENTION REQIREMENTS FOR AIRBUS SUPPLIERS
INTERCHANGEABILITY PROCESS - TERMS AND DEFINITIONS
INTERCHANGEABILITY PROCESS AIRBUS PROPRIETARY PARTS
INTERCHANGEABILITY PROCESS DESIGN INSTRUCTIONS FOR CONTRACTUALLY INTERCHANGEABLE AIRBUS PROPRIETARY PARTS
INTERCHANGEABILITY PROCESS - INSTRUCTIONS FOR USE OF THE DECISION TREE
INTERCHANGEABILITY PROCESS REFERENCES AND GLOSSARY
CONSTITUENT ASSEMBLY INSPECTION REPORT (CAIR)
AEROSTRUCTURE WORK PACKAGES - TECHNICAL GENERAL REQUIREMENTS
CONFIGURATION CONFORMITY PROCESS
WEIGHT CONTROL
WEIGHING OF PARTS, SUB-ASSEMBLIES, ASSEMBLIES, EQUIPMENT
MASS ACCOUNTING
WEIGHING
RE-ALLOCATION OF CONSTITUENT ASSEMBLIES
QUALIFY AND STANDARDIZE PRODUCTS AND PROCESSES
FIRST PART QUALIFICATION (FPQ)
HOLES & FASTENERS DESIGN
THIRD ANGLE
QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE DISTRIBUTORS
LOCAL DOCUMENTATION REMOVAL - AIRBUS SUPPLIER INSTRUCTIONS
SCREW - COUNTERSUNK HEAD
RIVET - CYLINDRICAL HEAD, LOCKBOLT
BUSH - FOR USE WITH ASNA2041 AND ASNA2042
WASHER - PA 6.6
TECHNICAL SPECIFICATION
BRACKET
SECTION - EXTRUDED, UTILIZATION STATUS : T6511
NUT - HEXAGONAL, SELF-LOCKING, ALUMINUM ALLOY
NUT-HEXAGONAL, SELF-LOCKING
NUT - HEXAGONAL, SELF-LOCKING, BIHEX, SHEAR TYPE
WASHER - PRESSURE
ALUMINIUM ALLOY 7175-T7351 PLATES
7010-T7451 ALUMINIUM ALLOY PLATES
2.4 CMN 21-09-06 (21.6.9) STEEL WORK - HARDENED - SERIES IN INCHES CIRCULAR TUBES FOR HYDRAULIC CIRCUITS
E-Z1 CNDAT 12-10 STEEL Rm 1400 MPa WROUGHT ROUND BARS
COPPER ALLOY Cu Al 10 Ni USE CONDITION M WROUGHT ROUND BARS
TEE - REDUCER, SWAGE-TYPE
SLEEVE - SWAGE TYPE
FINISH PAINT PU 66 - 5440
PAINT PRIMARY PAC 33
TUBE AND ROD OF POLYACETAL (POM)
STRAPS ASSEMBLY BONDING ROUND BRAID
PLACARD -- SELF-ADHESIVE
REACTION ADHESIVE EP-BASE, RANGE -55 DEGREE C TO + 135 DEGREE C
REPLACEMENT OF MULTIPLE NATCO STANDARDS BY AIMS 10-04-030 FOR TWO-PART EPOXY BASED REACTION ADHESIVES, ROOM TEMPERATURE CURING (TEMPERATURE RANGE FROM -55 C TO 135 C)
MARKING OF PARTS SELECTION OF MAKING PROCEDURE
PRODUCTION COMPONENTS
METHOD FOR INTERCHANGEABILITY OF AIRCRAFT ITEMS
INTERCHANGEABILITY FOR EQUIPMENT
METHOD FOR SELECTING AND IMPLEMENTATION OF MARKING PROCESSES FOR AIRCRAFT CONSTITUENT ITEMS
METHOD TO MANAGE CONTRACTUAL ANS SPARE INTERCHANGEABILITY FOR PROPRIETARY PARTS
AIRBUS SUPPLY CHAIN - TOOLING MANUAL
AIRBUS SUPPLIER PACKAGING MANUAL
EXTERNAL PAINTING QUALITY CRITERIA
DIMENSIONS FOR SPHERICAL BEARING - HOUSING INCH SERIES
NUT, SELF - LOCKING, HEXAGON, LOW HEIGHT, LIGHT WEIGHT
NAS 1726
NSA 2010
NSA 2017
NSA 2110
NSA 5059
NSA 5060
NSA 5101
NSA 5120
NSA 5121
NSA 5122
NSA 5191
NSA 5355
NSA 5379
NSA 5472
NSA 5474
NSA 5575
NSA 8203
NSA 8500
NSA 855006
NSA 855007
NSA 855008
NSA 855010
NSA 855014
NSA 855015
NSA 855020
NSA 855026
NSA 855034
NSA 855036
NSA 940000-003
NSA 940000-004
NSA 940000-014
NSA384510
NSA9117
S21
S90
SL4083
SL4477
SL5173
TN A 007.10003 APPENDIX
TN.A.007.10003
TN.A.007.10003_APPENDIX
TN.A.007.10006
TN.A.007.10010
TN.A.007.10050
TN.A.007.10053
TN.A.007.10054
5
AP
AA
H
U
V
AG
S
AC
Z
F
F
G
R
H
N
Z
M
T
V
V
AC
V
P
AG
Z
P
V
G
H
E
K
BK
4
5
5
5
7
BH3
BJ
BK13
S
AJ
BF
U
R
NUT, SELF-LOCKING, CAPTIVE WASHER, SHEAR TYPE, 450 DEGREES F AND 800 DEGREES F
HOLE SIZES AND ASSOCIATED FITS
TORQUE - TIGHTENING
TOLERANCES - MANUFACTURING, GENERAL
NUT-LOW - CASTELLATED, HEXAGON, SELF-LOCKING
NUT - CASTELLATED, HEXAGON, SELF-LOCKING
SLEEVE - RETENTION, BEARING AND BALL-JOINT
BUSH - SHOULDERED
BUSH - PLAIN
BUSH - SHOULDERED
BOLT - HEXAGONAL HEAD, TORQ-SET, FULLY THREADED
WASHER - TAB, FLAT TYPE
WASHER
NUT - HEXAGON AND 12 POINTS, SELF - LOCKING, COUNTER BORED, WITH CAPTIVE WASHER, ALLOY STEEL, +232 C (+450 F)
NUT - HEXAGONAL, SELF - LOCKING, CARBON STEEL OR ALLOY STEEL
CLAMP - BONDING
O-RING -- FLUOROSILICONE
UNION - FOR HOSE, LOW PRESSURE
UNION - STRAIGHT, SWAGE-TYPE
ELBOW - SWAGE - TYPE
UNION - TEE, SWAGE - TYPE
UNION - STRAIGHT, FOR CRIMPED TUBE
TEE - SPECIAL, SWAGE-TYPE
CROSS-REDUCER, SWAGE-TYPE
ELBOW - SPECIAL, 90 DEG.
UNION - TEE, SWAGE-TYPE, WITH MS END FITTING ON TAIL OF T
BUSH - SWAGED
UNION - STRAIGHT, REDUCER, SWAGE-TYPE, REMOVABLE
UNION TEE FOR TEMPERAURE SENORS
UNION TEE FOR PRESSURE SENOR WHIT FLUSH DIAPRAGM
UNION TEE LP FOR TT371 AND TT372
TECHNICAL SPECIFICATION FOR 21-6-9 CRES HYDRAULIC TUBES
IDENTIFICATION PLATE - AIRCRAFT AND CONSTITUENT ASSEMBLIES
NUTS AND BOLTS DRILLED FOR WIRE LOCKING
GENERAL SURFACE FINISH AND DEBURRING
DEBURRING - HOLES AND EDGES
PLAIN HOLES TO ACHIEVE CLEARANCE FIT WHEN USED WITH PROTRUDING HEAD BOLTS
COUNTERSUNK HOLES OF NOMINAL DIAMETER TO + 0.002 (+ 0,05) TO ACHIEVE 0.002 (0,05) MAXIMUM PROTRUSION WHEN USED WITH 100 DEGREES SHALLOW COUNTERSUNK HEAD BOLTS
TECHNICAL NOTES (TN) PROTECTIONS
PROTECTIONS
APPENDIX TO TN.A.007.10003 ISSUE BH, PROTECTIONS
LUBRICANTS
SEALING
NON-METALLIC ANTI-CORROSIVE COATINGS (PAINTS - VARNISHES)
STRUCTURAL ADHESIVES
NON STRUCTURAL ADHESIVES
NOT TO BE DISCLOSED
INFORMATION CONTAINED HEREIN IS SUBMITTED IN CONFIDENCE OR PRIVILEGED AND IS EXEMPT FROM DISCLOSURE UNDER THE FREEDOM OF INFORMATION ACT (5 U.S.C. 552) BY REASON OF THE EXEMPTIONS IN SEC. 552(B)(3) -- BY REFERENCE TO 18 U.S.C. SEC.
1905 -- AND SEC. 552(B)(4) OF SAID ACT.