8-Port Antenna (preliminary)
4x (1710-2690) MHz
Embedded RET (AISG 2.0 Compliant), Field Exchangeable
4.3-10 Connectors
4WME-01A
HB Dual Twin Beam / 2.07 m
Electrical Data
(BASTA)
4 x (1710-2690)
Frequency(MHz)
Bottom
Gain
1710-1900
1900-2180
2300-2500
2500-2690
18.3±0.4
18.9±0.5
19.1±0.5
18.8±0.5
18.0±0.4
18.5±0.5
18.7±0.5
18.4±0.5
dBi
Top
Polarization
±45
°
Horizontal Pattern
3dB Beamwidth
36±1
34±1
34±2
34±2
±30
±30
±30
±30
28
26
28
25
22
22
22
20
16
16
17
18
9.4±0.6
8.4±0.5
7.4±0.5
6.7±0.3
18
18
°
Beam Peak Position
F/B Ratio
Copolar(180°±30°)
Cross-Polar
Ratio @Boresight 0dB
dB
Sidelobe
Vertical Pattern
3dB Beamwidth
°
Electrical Downtilt
2-12
1st Upper sidelobe
dB
18
18
Suppression
RF Parameters
VSWR
1.5:1
Port Isolation
dB
25
Beam Isolation
dB
30
3rd Order
dBc
-150 @ 2 x 43 dBm
Impedance
Ω
50
Power Handling
W
250
PIM
Mechanical Data
(BASTA)
Input Connectors
8 x 4.3-10 Female
Connector Position
Bottom
Lightning Protection
DC Ground
Radome Material
Fiberglass
Antenna Weight
31 kg
68 lb
Antenna Dimensions (H x W x D)
2070 x 396 x 190 mm
81.5 x 15.6 x 7.5 in
Maximum Wind Velocity
241 km/h
150 mph
Max. Wind Load @150 km/h (Front/Rear/Side)
975/758/278
219/170/62
Mast Diameter Supported
50 - 110 mm
2.0 - 4.3 in
Relative Humidity
5% - 95%
Operating Temperature Range
-40 ~ +70 °C
Rosenberger Hochfrequenztechnik GmbH & Co. KG
www.rosenberger.com
-40 ~ +158 °F
Rosenberger Asia Pacific Co., Ltd.
www.rosenbergerap.com
V 0.1
18/07/2019
1/2
8-Port Antenna (preliminary)
4x (1710-2690) MHz
Embedded RET (AISG 2.0 Compliant), Field Exchangeable
4.3-10 Connectors
4WME-01A
HB Dual Twin Beam / 2.07 m
Layout
3 R2
Array
Connector
Frequency (MHz)
Sub Unit #
RET Type
ICU Serial*
Y1
1–2
1710-2690
1
MRET
RB.....XXYYxxxxx-MM
Y2
3–4
1710-2690
1
MRET
RB.....XXYYxxxxx-MM
Y3
5–6
1710-2690
2
MRET
RB.....XXYYxxxxx-MM
Y4
7–8
1710-2690
2
MRET
RB.....XXYYxxxxx-MM
*Remark: XX – Year, YY – Week , xxxxx – Serial Number
Pattern
1710-2690_Azimuth
1710-2690_Elevation
Accessories
Item
Model
Mounting Kit
85-1
Weight (kg)
4.5
Mechanical Tilt Range (°)
0-10
Compliance
— Our quality assurance system and our environmental management system apply to the entire company
and are certified according to EN ISO 9001, EN ISO 14001 and OHSAS 18001
— Our products are compliant to the EU Directive RoHS as well as to other environmentally relevant
regulations (e.g. REACH)
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe
existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. For environmental information, please refer to www.rosenbergerap.com/content/Environment.aspx
Rosenberger Hochfrequenztechnik GmbH & Co. KG
www.rosenberger.com
Rosenberger Asia Pacific Co., Ltd.
www.rosenbergerap.com
V 0.1
18/07/2019
2/2