TÜV SÜD PSB Pte Ltd
Testing Services
Electrical & Electronics Centre (EEC)
(Lighting & Components)
1 Science Park Drive
Singapore 118221
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No.
:
16
Date
:
2 February 2018
Page
:
1 of 39
FIELD OF TESTING: Electrical Testing
PRODUCTS TESTED
A.
Lighting
1.
Luminaires
TESTS/PROPERTIES
Full Test
STANDARD METHODS
IEC 60598-1: 1999, 2003 + A1: 2006, 2008,
2014 + A1: 2017
IEC 62722-1: 2014
IEC/PAS 62722-1: 2011
EN 13032-1: 2004 + A1:2012
EN 60598-1: 1989, 2004 + A1: 2006, 1997,
2000, 2008 + A11: 2009, 2015
BS 5225 Pt 1: 1975
BS 5225 Pt 3: 1982
BS EN 60598-1: 1997, 2000, 2004, 2008, 2015
CIBSE LG3: 1996
CIE 70: 1987
CIE 84: 1989
CIE 117: 1995
CIE 121: 1996
CNS 14335: 1999
SASO 1318: 1997
SS 263 Part 1: 2000, 2005 + A1: 2007, 2010
SS IEC 60598-1: 2016
SS IEC 62722-1: 2015
TM5: 1980
TR 28-1: 2011
UL 1598: 2008 + revision 2011
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
2 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
AUSTRALIA & NEW ZEALAND
AS/NZS 60598-1: 1998, 2001, 2003, 2013
AS/NZS 60598.1: 2017
AS 1680.3: 1991
ASEAN EE MRA
CS 0034: 2003 [IEC 60598-1: 2003]
MS IEC 60598-1: 1997 [IEC 60598-1:1996, 1999]
MS IEC 60598-1: 2003 [IEC 60598-1]
MS IEC 60598-1: 2006
PNS 1328: 1996 [IEC 60598-1: 1992]
JAPAN EE MRA
J60598-1 [IEC 60598-1 Ed 4 + A1]
KOREA EE MRA
K 60598-1 [IEC 60598-1: 1999]
2.
Electronic Ballasts
Full Test
IEC 60924: 1990 + A1:1993
IEC 60925: 1989 + A1:1996 + A2:2001, 2001
IEC 60928: 1999
IEC 60929: 1990 + A1:1994 + A2:1996
IEC 60929: 2003, 2006, 2011 + A1:2015
IEC 61347-2-3: 2000 + A1: 2004 + A2:2006
IEC 61347-2-3: 2011 + A1:2016
IEC 61347-2-7: 2000, 2006, 2011
IEC 61347-2-10: 2009
IEC 61347-2-12:2005 + A1:2010, 2010
EN 60925:1991 + Amd 1:1996 + Amd 2:2001
EN 60929: 1992, 2004, 2006, 2011
EN 61347-2-3: 2001 + A1: 2004 + A2: 2006
EN 61347-2-3: 2011
EN 61347-2-7: 2001, 2006, 2012
EN 61347-2-10: 2001 + A1: 2009
EN 61347-2-12: 2005 + A1: 2010
BS EN 60929: 2006 Amd 1:1995, Amd 2: 1996
CNS 13755: 2006
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
3 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
MS IEC 61347-2-3: 2003
SASO 1488: 1999
SASO 1489: 1999
SS 380 Part 1: 1996 Amd 1: 1999
SS 380 Part 2: 1996
SS 490 Part 2: 3: 2002
AUSTRALIA & NEW ZEALAND
AS 3134: 1992
AS/NZS 60925:2005
AS/NZS 60928: 2000
AS/NZS 60929: 2000, 2005
AS/NZS 61347.2.3: 2004, 2016
AS/NZS 61347.2.10: 2004
ASEAN EE MRA
MS IEC 60928: 1995 [IEC 60928: 1995]
MS IEC 60929: 1995 [IEC 60929: 1990]
MS IEC 60929: 2008
MS IEC 61347-2-3: 2014
PNS 135-1: 1997 [IEC 60928: 1995-02]
PNS 135-2: 1993 + A1 & A2: 1997
[IEC 60929: 1990 + A1: 1994 + A2: 1996]
PNS IEC 60929:2006
PNS IEC 61347-2-3:2002, Amd 1:2006, 2003
JAPAN EE MRA
J60928 [IEC 60928 Ed 2]
J61347-2-3 [IEC 61347-2-3 Ed 1]
KOREA EE MRA
K 60929 [IEC 60929: 1990]
K 61347-2-3 [IEC 61347-2-3: 2004 + A1: 2006]
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
4 of 39
:
PRODUCTS TESTED
3.
Ballast
TESTS/PROPERTIES
Full Test
:
STANDARD METHODS
IEC 60920:1990 + A1: 1993 + A2: 1995
IEC 60921: 1988, 2004, 2006 +Amd 1: 1990 +
Amd 2: 1994
IEC 62442-1 Ed1, 2011-10
EN 60921: 1991 + A1: 1992 + A2: 1995
EN 60921: 2004 + A1: 2006
EN 61347-2-8: 2001 + A1: 2006
EN 62442-1:2011
MS 1778-1: 2005
MS 1778-2: 2005
MS IEC 60921: 2006
MS IEC 61347-2-8: 2003, 2014
SASO 507: 1988, 2002
SASO 508: 1987, 2002
SS 24: 1987
AUSTRALIA & NEW ZEALAND
AS/NZS 60921: 2002
AS/NZS 61347.2.8: 2003
NZHB 4782.2: 2001
NZHB 4783.2: 2001 + A1: 2001
ASEAN EE MRA
MS 141: Part 1: 1992, 1993
MS 141: Part 2: 1992, 1993
MS IEC 60921:2013
PNS IEC 60921:2006
TCVN 8248:2009
JAPAN EE MRA
J60920 [IEC 60920 Ed 1 + A1 & A2]
J61347-2-8: 2002 [IEC 61347-2-8 Ed 1]
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
5 of 39
:
PRODUCTS TESTED
4.
TESTS/PROPERTIES
Emergency and Exit
Lights
Full Test
For Clause 10 & 11
For Clause 5.2, 5.4, 5.5,
6, 7, 8, 9, 10.6 & 10.7.
:
STANDARD METHODS
IEC 60598-2-22: 1990
IEC 60598-2-22: 1997 + A1:2002 + A2: 2008
IEC 60598-2-22: 2014
EN 60598-2-22: 1998 + Amd 1:2003 + Amd 2:2008
EN 60598-2-22: 2014
ISO 3864-1: 2002, 2011
BS 5266-1: 2005, 2011, 2016
BS 5266-7: 1999
BS 5499-1: 2002
BS 5499-3:1990
BS 5499-4: 2000, 2013
BS 5499-7: 1999
BS 5499-10: 2006, 2014
BS 5499-11: 2002
BS EN 1838 1999, 2013
BS EN 60598-2-22: 1990 & 1999, A1: 2002
BS EN 60598-2-22: 1998 + A2: 2008, 2014
CP 19: 1991 Amd 1 & 2: 1994, 2000, Amd 1: 2003,
Amd 2: 2005
SASO 1688: 1999, 2000
SS 263: Part 2: 1996
SS 263: Part 2: 1998, Amd 1: 2003, Amd 2: 2008
SS 508 Part 1: 2004, 2013
SS 508 Part 3: 2004, 2013
SS 508 Part 4: 2013
SS 508 Part 5: 2013
SS 563 Part 1: 2010
SS 563 Part 2: 2010 + A1: 2013
SS IEC 60598-2-22: 2016
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.22: 2005
AS/NZS 2293.1: 1998, 2005 + A1: 2008 + A2: 2014
AS/NZS 2293.3: 1995 + A1: 1998, 2005 + A1:
2010 + A2: 2012
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
6 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
JAPAN EE MRA
J60598-2-22 [IEC 60598-2-22 Ed 3]
5.
Fluorescent Lamps
Full Test
IEC 60081 Ed 5:1997 + A1:2000 + A2:2003 + A3:
2005 + A4: 2010 + A5: 2013
EN 60081:1998 Amd 1:2002, Amd 2:2003, Amd 3:
2005, Amd 4:1010, Amd 5:2013
EN 61195: 1999
SASO 138: 1979
SASO 139: 1979
AUSTRALIA & NEW ZEALAND
AS/NZS 4782.1: 2004, Amd 1: 2006
AS/NZS 4782.2: 2004, Amd 1: 2006
Safety Requirements
ASEAN EE MRA
CS 008: 2003 [IEC 60081: 2002]
PNS IEC 60081:2001 [IEC 60081:1997], 2006 +
Amd 2:2006 + Amd 3:2006
TIS 956-2533 (1990)
KOREA EE MRA
K 60081 [IEC 60081: 1997]
6.
Lamps and Starter
Holders
Full Test
IEC 60400:1999, 2004, A1:2002, A2:2004
IEC 60400: 2008 + A1: 2011
IEC 60838: 2004 + A1: 2008 + A2: 2011
IEC 60838-1:1997 + A1: 1999 + A2: 2002
IEC 60838-1:2016 + A1: 2017
IEC 60838-2-1:1994 + A1: 1998 + A2:2004
IEC 60838-2-2: 2006
EN 60400: 1996 + A1: 1997 + A2: 1998, 2000, A1:
2002, A2: 2004, 2008 + A1: 2011
MS IEC 60061-2: 2005
MS IEC 60838-1: 2008
MS IEC 60838-2-2: 2008
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
7 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
AUSTRALIA & NEW ZEALAND
AS/NZS 4782.1: 2004
AS/NZS 4782.2: 2004
ASEAN EE MRA
CS 0031: 2003 [IEC 60400: 1999]
MS IEC 60400: 1999 [IEC 60400: 1991]
PNS 42: 1997 [IEC 60400: 1996]
JAPAN EE MRA
J60400 [IEC 60400]
J60838-1 [IEC 60838-1 Ed 2]
J60838-2-1 [IEC 60838-2-1 Ed 1]
KOREA EE MRA
K 60400 [IEC 60400: 1999]
7.
Glow Starters
Full Test
IEC 60155: 1993 + A1: 1995 + A2: 2006
EN 60155: 1995 + A1: 1995 + A2: 2007
SASO 146: 1979
SASO 147: 1979
AUSTRALIA & NEW ZEALAND
AS/NZS 60155: 2000, Amd 1: 2000, Amd 2:2000
ASEAN EE MRA
MS IEC 60155: 1996 [IEC 60155: 1993]
PNS 45: 1997 + A1: 1997
[IEC 60155: 1993 + A1: 1995]
TIS 183-2547 (2004) [IEC 60155: 1993 + A1: 1995]
JAPAN EE MRA
J60155 [IEC 60155 Ed 4 + Amd 1]
KOREA EE MRA
K 60155 [IEC 60155: 1993]
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
8 of 39
8.
:
PRODUCTS
TESTED
Tungsten Filament
Lamps
:
TESTS/PROPERTIES
STANDARD METHODS
Full Test
IEC 60064 Ed 6:1993 + A1:2000 + A2:2002 +
A3:2005 + A4:2007 + A5:2009, Ed 6.3:2005
EN 60064: 1995, Amd 2: 2003, Amd 3: 2006, Amd
4: 2007, Amd 11: 2007, Amd 5: 2009
SASO 33: 1998
SASO 34: 1998
AUSTRALIA & NEW ZEALAND
AS 2325: 1993
ASEAN EE MRA
CS 006: 2003 [IEC 60064: 1993]
PNS 38-2: 1995 [IEC 60064: 1993]
SNI 04-3560-1994 [IEC 60064]
INDIA EE MRA
IS 418: 1978 [IEC 60064: 1973]
KOREA EE MRA
K 60064 [IEC 60064: 1993]
9.
Fixed General
Purpose Luminaires
Full Test
IEC 60598-2-1: 1979 + A1: 1987
EN 60598-2-1: 1989
SASO 1674: 1999
SS 263: Part 3: 1989, A1: 1989 & A2: 1996
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.1: 1998, 2014 + A1: 2016
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
9 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
ASEAN EE MRA
MS IEC 60598-2-1: 1997 [IEC 60598-2-1: 1979]
JAPAN EE MRA
J60598-2-1 [IEC 60598-2-1 Ed 1 + A1]
KOREA EE MRA
K 60598-2-1 [IEC 60598-2-1: 1979]
10.
Recessed Luminaires
Full Test
IEC 60598-2-2: 1997, Amd 1: 1997, 2011
EN 60598-2-2: 1996, Amd 1: 1997, 2012
BS EN 60598-2-2: 1997, 2012
SASO 1675: 1999
SS 263: Part 4: 2000
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.2: 2001, 2016
ASEAN EE MRA
MS IEC 60598-2-2: 1998 [IEC 60598-2-2]
JAPAN EE MRA
J60598-2-2 [IEC 60598-2-2 Ed 2 + A1]
KOREA EE MRA
K 60598-2-2 [IEC 60598-2-2: 1997]
11.
Luminaires for road
and street lighting
Full Test
IEC 60598-2-3: 2001, 2002, Amd 1: 2011
EN 60598-2-3: 1994, 2003, Amd 1: 2011
BS EN 60598-2-3: 1994, 2003, Amd 1:2011
AS/NZS 1158.6: 2010
AS/NZS 60598.2.3: 2015
SASO 1676: 1999
SS 263: Part 5: 2000, Amd 1: 2001
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
10 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
JAPAN EE MRA
J60598-2-3 [IEC 60598-2-3 Ed 2 + A1]
12.
Luminaires with builtin transformers for
filament lamps
IEC 60598-2-6: 1994 + A1: 1996
EN 60598-2-6: 1995
EN 60598-2-6: 1994, A1: 1997
Full Test
BS EN 60598-2-6: 1995
SASO 1679: 1999
SS 263: Part 7: 1996, Amd 1: 1998
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.6: 1998
JAPAN EE MRA
J60598-2-6 [IEC 60598-2-6 Ed 2 + A1]
KOREA EE MRA
K 60598-2-6 [IEC 60598-2-6: 1994]
13.
Lighting Chains
Full Test
IEC 60598-2-20:1996, 2002 + A1:1998, A2:2002,
2010
IEC 60598-2-20:2014
EN 60598-2-20: 1997 + A1:1998 + A2:2004, 2010,
2015
BS EN 60598-2-20: 1998, 2010, 2015
SASO 1687: 1999
SS 263: Part 10: 2000
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.20: 1998, 2002 + A1:1999
ASEAN EE MRA
CS 0041: 2003 [IEC 60598-2-20: 2001]
MS IEC 60598-2-20:1998 [IEC 60598-2-20:1996]
MS IEC 60598-2-20: 2005
PNS 189: 2000
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
11 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
JAPAN EE MRA
J60598-2-20 [IEC 60598-2-20 Ed 1 + A1]
14.
Ignitors
Full Test
IEC 60926: 1995, 2000
IEC 60927: 1996, 2000, 2004, Amd 1: 1999, Amd
2: 2004
IEC 60927:2007 + A1:2013
EN 60927: 1996, Amd 1: 1999, Amd 2: 2004, 2007
SASO 1493: 1999
AUSTRALIA & NEW ZEALAND
AS/NZS 60927: 2005
KOREA EE MRA
K 60927 [IEC 60927: 2000]
15.
AC Capacitors
Full Test
IEC 61048:1991, 1999 + A1:1995 + A2:1999
IEC 61049: 1991
EN 61048:1993 + A1:1996 + A2:1999
EN 61049:1993
AUSTRALIA & NEW ZEALAND
AS/NZS 61048: 2002
AS/NZS 61049: 2002
ASEAN EE MRA
MS IEC 61048: 1999 [IEC 61048: 1991]
MS IEC 61049: 1999 [IEC 61049: 1991]
PNS 1574: 1997 [IEC 61048: 1991]
KOREA EE MRA
K 61048 [IEC 61048: 1999]
16.
Isolating
Transformers
Full Test
IEC 60742: 1983 + A1: 1992
IEC 61558-1: 1997, 1998 + Amd 1:1998, 2005 +
A1:2009, 2009
IEC 61558-2-1: 1997, 2007
IEC 61558-2-2: 1997, 2007
IEC 61558-2-4: 1997, 2009
IEC 61558-2-5: 1997, 2010
IEC 61558-2-6: 1997, 2009
EN 61558-1:1997 + A1:1998, 2005 + A1:2009
EN 61558-2-1: 1997, 2007
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
12 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
EN 61558-2-2: 1998, 2007
EN 61558-2-4: 1997, 2009
EN 61558-2-6: 1997, 2009
BS EN 61558-1: 1998, 2005 + A1: 2009
BS EN 61558-2-1: 1998, 2007
BS EN 61558-2-2: 1998, 2007
BS EN 61558-2-4: 1998, 2009
BS EN 61558-2-5: 1998, 2010
BS EN 61558-2-6: 1998, 2009
MS IEC 61558-1: 2005
MS IEC 61558-2-5: 2006
MS IEC 61558-2-6: 2006
MS IEC 61558-2-17: 2007
AUSTRALIA & NEW ZEALAND
AS/NZS 3108:1994
AS/NZS 3108:1994, Amd 1:1995, Amd 2: 1995, Amd
3:1996, Amd 4:1996, Amd 5:1997, Amd 6:1997 &
Amd 7:2001
AS/NZS 61558.1 & Amd 2: 2004
AS/NZS 61558.1:2000, Amd 1:2001, Amd 2: 2004,
Amd 3:2004, Amd 4:2005, Amd 5:2006, Amd 6:2007,
Amd 7:2011
AS/NZS 61558.1:2008 + Amd 1:2009 + Amd 2:2015
AS/NZS 61558.2.4: 2001, 2009 + Amdt 1:2012
AS/NZS 61558.2.6:2001 + Amd 1:2006
AS/NZS 61558.2.6:2009 + Amd 1:2012
ASEAN EE MRA
CS 0046: 2003 [IEC 61558-2-6: 1997]
MS 1700: 1998
PNS IEC 61558-1: 2002
JAPAN EE MRA
J61558-1 [IEC 61558-1 Ed 1]
J61558-2-1 [IEC 61558-2-1:1997]
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
13 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
J61558-2-2 [IEC 61558-2-2:1997]
J61558-2-4 [IEC 61558-2-4 Ed 1]
J61558-2-5 [IEC 61558-2-5 Ed 1]
J61558-2-6 [IEC 61558-2-6 Ed 1]
J61558-2-7 [IEC 61558-2-7 Ed 1]
KOREA EE MRA
K 61558-1 [IEC 61558-1: 1998]
17. Portable general
purpose luminaires
Full Test
IEC 60598-2-4: 1997 , 2017
EN 60598-2-4: 1997, 1998
BS EN 60598-2-4: 1998
SASO 1677: 1999
SS 263: Part 6: 1998
AUSTRALIA & NEW ZEALAND
AS/NZS 3128: 1998 + A1: 1998 + A2: 2002
AS/NZS 60598.2.4: 1998, 2005 + A1: 2007
ASEAN EE MRA
CS 0034: 2003 [IEC 60598-2-4: 1997]
MS IEC 60598-2-4: 2003 [IEC 60598-2-4: 1997]
JAPAN EE MRA
J60598-2-4 [IEC 60598-2-4 Ed 2]
KOREA EE MRA
K 60598-2-4 [IEC 60598-2-4: 2001]
18. DC or AC supplied
electronic step-down
convertors for
filament lamps
Full Test
IEC 61046: 1993 + A1: 1995
EN 61047:1992 + A1:1996 + A2:2001, 2004
IEC 61347-2-2: 2000, 2006 + A1: 2005 + A2:
2006, 2011
EN 61347-2-2: 2001 + A1: 2006 + A2: 2006;
2012
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
14 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
AUSTRALIA & NEW ZEALAND
AS/NZS 61046: 2001
AS/NZS 61047: 2001
AS/NZS 61347.2.2: 2004, 2007
19. Approval & test
specification –
Luminaires(lighting
fittings)
Full Test
20. Approval & test
specification –
Fluorescent lamp
ballasts
Full Test
AUSTRALIA & NEW ZEALAN
AS 3137: 1992 + Amd 1: 1992 + Amd 2: 1995
AUSTRALIA & NEW ZEALAND
AS 3168: 1991 + Amd 1: 1991
ASEAN MRA
TIS 23-2521 (1978)
21. Electric Shaver
supply units
Full Test
EN 61558-2-5:1998, 2010
BS EN 61558-2-5:1998, 2010
AUSTRALIA & NEW ZEALAND
AS/NZS 61588.2.5:2003, 2011 + A1:2012
22. Bayonet Lampholder
Full Test
IEC 61184: 1997, Amd 1:2000, Amd 2: 2004
EN 61184: 1997, Amd 1: 2001, Amd 2: 2004
BS EN 61184: 1995
SS 125: 2001
AUSTRALIA & NEW ZEALAND
AS 3117: 1994
AS 3119: 1994
JAPAN EE MRA
J61184 [IEC 61184 Ed 1 + Amd 1]
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
15 of 39
:
PRODUCTS TESTED
23.
Lamp Controlgear
TESTS/PROPERTIES
Full Test
:
STANDARD METHODS
IEC 61347-1:2000, 2003 + Amd 1:2003, 2007
+ A1:2010 + A2:2012, 2015
EN 61347-1:2001 + A1:2007, 2008 + A1:2011
+ A2:2013, 2015
SS 490 Part 1: 2001
AUSTRALIA & NEW ZEALAND
AS/NZS 61347.1: 2002, 2016
ASEAN EE MRA
MS 769: 1982
MS IEC 61347-1:2003, 2012
PNS IEC 61347-1:2002 + A1:2006
JAPAN EE MRA
J61347-1 [IEC 61347-1 Ed 1]
KOREA EE MRA
K 61347-1 [IEC 61347-1: 2000]
K 61347-1 [IEC 61347-1: 2003 + A1: 2003]
24.
Magnetic Ballast
Full Test
IEC 61347-2-8: 2000, 2006
EN 61347-2-8: 2001, A1: 2006
K 61347-2-8 [IEC 61347-2-8: 2006]
SS 490 Part 2: 8: 2001
SS 491: 2001
ASEAN EE MRA
PNS 12-3: 2000
PNS 2050-4:2007
PNS IEC 61347-2-8:2002
25.
Magnetic Ballast for
Discharge Lamps
Full Test
IEC 60922:1997, 1989 + A1:1990 + A2:1992
SASO 691: 1994
SASO 692: 1992, 1994
SASO 1491: 1999
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
16 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
AUSTRALIA & NEW ZEALAND
AS/NZS 60922: 1998
JAPAN EE MRA
J60922 [IEC 60922 Ed 1 + A1 & 2]
26.
Ballasts for
Discharge Lamps
Full Test
IEC 61347-2-9:2000 + A1:2003 + A2:2006, 2012
EN 61347-2-9:2001 + A1:2003 + A2:2006, 2013
AUSTRALIA & NEW ZEALAND
AS/NZS 61347.2.9:2004
ASEAN EE MRA
MS IEC 61347-2-9:2003
PNS 105: 1986
JAPAN EE MRA
J61347-2-9 [IEC 61347-2-9 Ed 1]
KOREA EE MRA
K 61347-2-9 [IEC 61347-2-9:2000]
27. Self-ballasted Lamps
Full Test
IEC 60968:1999, 2012, 2015
IEC 60969:1988 + A1:1991 + A2:2000, 2016
EN 60968:1990 + A1:1993 + A2:1999, 2013, 2015
EN 60969:1993 + A1:1993 + A2:2000
AUSTRALIA & NEW ZEALAND
AS/NZS 4847.1: 2010
AS/NZS 4847.2: 2010
AS/NZS 60968: 2001
AS/NZS 60969: 2001
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
17 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
ASEAN EE MRA
CS 0027: 2003 [IEC 60968: 1988]
MS IEC 60968:2006 (CONFIRMED:2011)
MS IEC 60969:2006 (CONFIRMED:2011)
PNS 603-1: 1993 + A1: 2001
[IEC 60968:1988 + A1:1991 + A2:1999]
PNS 603-2: 1993 + A1: 2001 [IEC 60969: 1988]
PNS 2050-2:2007
PNS IEC 968:2006
PNS IEC 969:2006
SNI 04-6504-2001 [IEC 60968]
INDIA EE MRA
IS 15111 Part 1: 2002 [IEC 60968: 1988]
IS 15111 Part 2: 2002 [IEC 60969: 1988]
JAPAN EE MRA
J60968 [IEC 60968 Ed 1 + A1 & A2]
KOREA EE MRA
K 60968 [IEC 60968: 1999]
K 60969 [IEC 60969: 2001]
K 61347-1 [IEC 61347-1: 2003 + A1: 2003]
28.
Electronic
Transformer
Full Test
IEC 61047:2001, 2004
IEC 61047:1991 + A1:1996 + A2:2001
EN 61047:1992 + A1:1996 + A2:2001, 2004
AS/NZS 61047: 2001
29.
Single-Capped Lamp
Full Test
IEC 60901 Ed 2: 1996 + A1: 1997 + A2: 2000 + A3:
2004 + A4: 2007 + A5: 2011 + A6:2014
IEC 60901 Ed 2.2: 2001
EN 60901: 1996, Amd 1: 1997, Amd 2: 2000, Amd
3: 2004, Amd 4: 2008
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
18 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
AUSTRALIA & NEW ZEALAND
AS/NZS 60901: 2002 & 2003
ASEAN EE MRA
MS IEC 60901:2003 (CONFIRMED:2011)
PNS 1261: 1995 [IEC 60901: 1992]
PNS 2050-1-2:2006
PNS IEC 901:2001 + Amd 1:2006 + Amd 2:2006 +
Amd 3:2006
TCVN 7896:2008
KOREA EE MRA
K 60901 [IEC 60901: 2001]
30.
Handlamps
Full Test
IEC 60598-2-8:1996 + A1:2000 + A2:2007, 2013
EN 60598-2-8:1997 + A1:2000 + A2:2008, 2013
BS EN 60598-2-8:1997 + A2:2008, 2013
SASO 1681: 1999
SS 263 Part 13: 1997 + A1: 2000
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.8: 1998 & 2002, 2015
ASEAN EE MRA
CS 0036: 2003 [IEC 60598-2-8: 1996]
MS IEC 60598-2-8: 1998 [IEC 60598-2-8: 1991]
MS IEC 60598-2-8: 2006
JAPAN EE MRA
J60598-2-8 [IEC 60598-2-8 Ed 2]
31.
Double-Capped
Fluorescent Lamps
Full Test
IEC 61195: 1999 + A1:2012 + A2:2014, 2012, 2014
EN 61195: 1999 + A1:2012 + A2:2015, 2013, 2015
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
19 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
ASEAN EE MRA
PNS 2050-1-1:2007 + Amd 1:2013
PNS IEC 61195:2006
TCVN 8249:2009
JAPAN EE MRA
J61195 [IEC 61195 Ed 2]
KOREA EE MRA
K 61195 [IEC 61195: 1999]
32.
Starting Devices for
Discharge Lamps
Full Test
IEC 61347-2-1:2000, 2006 + Amd 1:2005 + Amd
2:2013, 2013
EN 61347-2-1:2001 + A1:2006
AUSTRALIA & NEW ZEALAND
AS/NZS 61347.2.1: 2002
33. Portable Child
Appealing Luminaires
Full Test
IEC 60598-2-10: 1987 +A1: 1990 & A2: 1995, 2003
EN 60598-2-10: 2003
BS EN 60598-2-10: 1989, 2003
SASO 1683: 1999
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.10: 1998, 2015
34. Extra Low Voltage
Lighting Systems for
filament Lamps
Full Test
IEC 60598-2-23: 2001
EN 60598-2-23: 1996 + A1: 2000
BS EN 60598-2-23: 1997
SASO 1689: 1999
AUSTRALIA & NEW ZEALAND
AS/NZS 60598-2-23: 2002
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
20 of 39
:
PRODUCTS TESTED
35.
Transformers for
Toys
:
TESTS/PROPERTIES
Full Test
STANDARD METHODS
IEC 61558-2-7: 1997, 2007
EN 61558-2-7: 1997, 2007
BS EN 61558-2-7: 1998, 2007
MS IEC 61558-2-7: 2007
AUSTRALIA & NEW ZEALAND
AS/NZS 61558.2.7: 2001, 2008, Amd 1:2012
36.
Electrical Equipment
Full Test
AUSTRALIA & NEW ZEALAND
AS/NZS 3100:1997 & 2002, Amd 1:2003,
Amd 2:2004, Amd 3:2005
AS/NZS 3100:2009 + A1:2010 + A2:2012 +
A3: 2014 + A4: 2015
37.
IP Test
Full Test
IEC 62262: 2002
IEC 60529: 2001, Amd 2: 2013
EN 60529: 1991 + A1: 2000 + A2: 2013
EN 62262: 2002
BS EN 60529: 1992 + A2: 2013
BS EN 62262: 2002
AS 60529: 2004
ISO 20653:2013
SS IEC 60529: 1989
USCG 162.060-30 (clause a7)
 Method 506.4 Procedure
I and III (Rain)
 Method 512.4 Procedure
I (Immersion)
 Method 506.5 Procedure
I
Note: For sample size up to
200mm x 200mm.
 Method 506.5 Procedure
III (Rain)
 Method 512.5 Procedure
I (Immersion)
MIL-STD-810F: 2000
MIL-STD-810G: 2008
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
21 of 39
:
PRODUCTS TESTED
TESTS/PROPERTIES
:
STANDARD METHODS
AUSTRALIA & NEW ZEALAND
AS 60529: 2004
JAPAN EE MRA
J60529 [IEC 60529 Ed 2]
38.
Approval and Test
Specification – Starters
for Fluorescent Lamps
Full Test
AUSTRALIA & NEW ZEALAND
AS 3138: 1993 + A1: 1994
ASEAN MRA
TIS 183-2528: 1985
39.
Luminaries – Particular
requirements for
luminaires for swimming
pools and similar
applications
Full Test
IEC 60598-2-18: 1993 + A1: 2011
EN 60598-2-18: 1994 + A1: 2012
BS EN 60598-2-18: 1994, Amd 1:2012
SASO 1685: 1999
SS 263 Part 11: 1997
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.18: 1998
40. Luminaries – Particular
requirements for airhandling luminaires
Full Test
IEC 60598-2-19: 1981 + A1: 1987 + A2: 1997
EN 60598-2-19: 1989, Amd 2: 1998
SASO 1686: 1999
SS 263 Part 12: 1997
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.19: 2001
41. Luminaires – Particular
requirements for
floodlights
Full Test
IEC 60598-2-5: 1998, 2015
EN 60598-2-5: 1989 & 1998, 2015
BS EN 60598-2-5: 1998, 2015
SASO 1678: 1999
SS 263 Part 8: 1998
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
22 of 39
:
PRODUCTS TESTED
:
TESTS/PROPERTIES
STANDARD METHODS
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.5: 2002
42. Luminaires – Particular
requirements for portable
luminaires for garden use
Full Test
IEC 60598-2-7:1982 + A1:1987 + A2:1994
EN 60598-2-7:1989, Amd 2:1996, Amd
3:1997
BS EN 60598-2-7:1997
SASO 1680/1999
SS 263 Part 9:1990 + A1:1990 + A2:1996
AUSTRALIA & NEW ZEALAND
AS/NZS 60598.2.7:2005
43. Edison screw Lampholders
Full Test
IEC 60238: 2002
ASEAN EE MRA
PNS 80: 1997 [IEC 60238: 1996]
KOREA EE MRA
K 60238 [IEC 60238: 2000]
44.
Single-capped fluorescent
lamps -safety
specifications
Full Test
IEC 61199: 1999, 2011 + A1:2012 + A2:2014,
2012, 2014
EN 61199: 1999, 2011 + A1:2013 + A2:2015
KOREA EE MRA
K 61199 [IEC 61199: 1999]
ASEAN EE MRA
PNS IEC 61199:2006
45. Auxiliaries for lamps –
Ballasts for discharge
lamps (excluding tubular
fluorescent lamps) –
Performance requirements
Full Test
IEC 60923: 1995, 2001, 2005 + A1: 2006
EN 60923: 1996, 2005, Amd 1: 2006
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
23 of 39
:
PRODUCTS TESTED
:
TESTS/PROPERTIES
STANDARD METHODS
AUSTRALIA & NEW ZEALAND
AS/NZS 60923: 1998
46. Safety of small power
transformers, power
supply units and similar –
Particular requirements for
bell and chime
transformers
Full Test
IEC 61558-2-8: 1998
IEC 61558-2-8: 2010
EN 61558-2-8: 1998
EN 61558-2-8: 2010
BS EN 61558-2-8: 1999
BS EN 61558-2-8: 2010
AUSTRALIA & NEW ZEALAND
AS/NZS 61558.2.8: 2001, 2011 + Amdt 1:2012
47. Safety of power
transformers, power
supply units and similar
products – Particular
Requirements for
transformers class III
handlamps for tungsten
filament lamps
Full Test
IEC 61558-2-9: 2002, 2010
EN 61558-2-9: 2003, 2011
BS EN 61558-2-9: 2003, 2011
BS EN 61558-2-17: 1998
AUSTRALIA & NEW ZEALAND
AS/NZS 61558.2.9: 2003, 2011 + Amdt 1:2012
AS/NZS 61588.2.17: 2001
48. Safety of power
transformers, power
supply units and similar–
Particular requirements for
transformers for switch
mode power supplies
Full Test
49. Incandescent Lamps –
Safety specifications
tungsten filament lamps
for domestic and similar
general lighting purposes
Full Test except clause
2.9 of IEC 60432-1.
IEC 61558-2-17: 1997
EN 61558-2-17: 1997
JAPAN EE MRA
J61558-2-17 [IEC 61558-2-17 Ed 1]
IEC 60432-1: 1999
IEC 60432-2: 1999
SASO 33: 1998
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
24 of 39
:
PRODUCTS TESTED
:
TESTS/PROPERTIES
STANDARD METHODS
ASEAN EE MRA
CS 025: 2003 [IEC 60432-1: 1999]
PNS 38-1: 1995 [IEC 60432-1:1993+ A1:1995]
TIS 4 Part 1-2529: 1986
KOREA EE MRA
K 60432-1 [IEC 60432-1: 1999]
50. Electrical supply track
systems for luminaries
Full Test
IEC 60570: 2003 + A1:2017
EN 60570: 2003
BS EN 60570: 2003
SASO 1672: 1999
SASO 1673: 1999
KOREA EE MRA
K 60570 [IEC 60570: 2003]
51. Measurement method of
total input power of ballastlamp circuits
Full Test
IEC 62442-1: 2011
EN 50294: 1998 + A1: 2001 + A2: 2003
EN 62442-1: 2011
52. Performance of electrical
lighting equipment –
Ballasts for fluorescent
lamps –
Method of measurement to
determine energy
consumption and
performance of ballasts
lamp circuits
Full Test
AUSTRALIA & NEW ZEALAND
AS/NZS 4783.1: 2001 (R2013)
53. Performance of electrical
lighting equipment –
Ballasts for fluorescent
lamps – Energy
performance standards
labelling and minimum
energy requirements
Full Test
AUSTRALIA & NEW ZEALAND
AS/NZS 4783.2: 2002 (R2013)
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
25 of 39
54.
:
:
PRODUCTS TESTED
TESTS/PROPERTIES
Automatic electrical
controls for household and
similar use
Full Test
STANDARD METHODS
IEC 60730-1:2003 + A1:2003 + A2:2007
EN 60730-1:2000 + Amd 1:2004, Amd
2:2008, Amd 11:2002, Amd 12:2003, Amd
13:2004, Amd 14:2005, Amd 15:2007, Amd
16:2007
BS EN 60730-1:1995, 2001
JAPAN EE MRA
J60730-1 [IEC 60730-1 Ed 2 + A1]
55.
Aquarium Luminaries
Full Test
IEC 60598-2-11:2005, 2013
EN 60598-2-11:2005, 2013
BS EN 60598-2-11:2005, 2013
56.
D.C. or A.C. supplied
electronic controlgear for
LED modules
Full Test
IEC 61347-2-13:2006, 2014 + A1:2016
IEC 62384:2011
IEC 62442-3:2014
EN 61347-2-13: 2006, 2014
EN 62384: 2006 + A1: 2009
EN 62442-3:2014
J61347-2-13 [IEC 61347-2-13: 2006]
AUSTRALIA & NEW ZEALAND
AS/NZS IEC 61347.2.13: 2013
ASEAN EE MRA
MS IEC 61347-2-13:2012
MS IEC 62384:2011, 2012
57.
Miscellaneous electronic
circuits used with
luminaries
Full Test
IEC 61347-2-11: 2001 + A1:2017
EN 61347-2-11: 2001
AUSTRALIA & NEW ZEALAND
AS/NZS 61347.2.11: 2003
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
26 of 39
:
PRODUCTS TESTED
58. Mains socket-outlet
mounted nightlights
:
TESTS/PROPERTIES
Full Test
STANDARD METHODS
IEC 60598-2-12: 2006, 2013
EN 60598-2-12: 2006, 2013
BS EN 60598-2-12: 2006, 2013
AUSTRALIA & NEW ZEALAND
AS/NZS 60598-2-12: 2013, 2015
59. Ground recessed
luminaries
Full Test
IEC 60598-2-13: 2006 + A1: 2011 + A2: 2016
EN 60598-2-13: 2006 + A1: 2012 + A2: 2016
BS EN 60598-2-13: 2006, Amd 1:2012 + A2:
2016
60. Power Supplies
Full Test
AUSTRALIA & NEW ZEALAND
AS/NZS 4665.1: 2005 + A1: 2009
AS/NZS 4665.2: 2006 + A1: 2009
61. LED modules for general
lighting – Safety
specifications
Full Test
IEC 62031:2008 + A1:2012, 2012 + A2:2014
EN 62031: 2008 + A1:2012, 2012 + A2:2015
SASO IEC 62031: 2009
62. Electrical and Photometric
Measurements of SolidState Lighting Products
Full Test
IES LM-79-08
63. Measuring Lumen
Maintenance of LED Light
Sources
Full test except ageing
process
IES LM-80-08
64. Adaptors
Full test
K 61558-1 [IEC 61558-1: 2005]
K 61558-2-5 [IEC 61558-2-5: 1997]
K 61558-2-6 [IEC 61558-2-6: 1997]
65. Safety of power
transformers, power
supplies, reactors and
similar products
- Part 1: General
requirements and tests
Full test
IEC 61558-1: 2005 + A1: 2009
AS/NZS 61558.1: 2008 + A1: 2009
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
27 of 39
:
PRODUCTS TESTED
:
TESTS/PROPERTIES
STANDARD METHODS
66. Safety of transformers,
Full test
reactors, power supply units
and similar products for supply
voltages up to 1100 V
- Part 2-4: Particular
requirements and tests for
isolating transformers and
power supply units
incorporating isolating
transformers
IEC 61558-2-4: 2009
EN 61558-2-4: 2009
67.
Safety of transformers,
Full test
reactors, power supply units
and similar products for supply
voltages up to 1100 V
- Part 2-6: Particular
requirements and tests for
safety isolating transformers
and power supply units
incorporating safety isolating
transformers
IEC 61558-2-6: 2009
68.
Safety of transformers,
Full test
reactors, power supply units
and similar products for supply
voltages up to 1100 V
- Part 2-13: Particular
requirements and tests for
auto transformers and power
supply units incorporating auto
transformers
IEC 61558-2-13: 1999, 2009
EN 61558-2-13: 2000, 2009
69.
Safety of power transformers,
power supply units and similar
- Particular requirements for
transformers and power
supplies for Toys
AS/NZS 61558.2.7: 2008 + A1:2012
Full test
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
28 of 39
:
PRODUCTS TESTED
70.
Switch mode power
supplies
:
TESTS/PROPERTIES
Full test
STANDARD METHODS
IEC 61558-2-16:2009 + A1:2013, 2013
EN 61558-2-16: 2009 + A1:2013, 2013
AS/NZS 61558.2.16: 2010 + A1: 2010 + A2:
2012 + A3:2014
71.
Household electrical
appliances –
Measurement of standby
power
Full test
IEC 62301:2005, 2011
EN 62301:2005, 2011
AS/NZS 62031:2014
72.
Energy Star Program
Criteria – Requirements
for Solid State Lighting
Luminaires Eligibility
Version 1.1
Version 1.2
Version 1.3
Luminaire Efficacy (Light
Output, Input Power), Colour
Rendering Index (CRI),
Chromaticity Correlated and
Colour Temperature (CCT)
ANSI C78.377-2008
ANSI C82.2-2002
CIE 13.3-1995
CIE 15: 2004
IESNA LM-16
IESNA LM-58-94
IESNA LM-79-08 sections 9 and 12
Power Factor
ANSI C82.77-2002
Zonal Lumen Density
IESNA LM-79-08 section 10
Lumen Maintenance (L70)
IESNA LM-80-08
Color Spatial Uniformity and
Color Maintenance
CIE 15: 2004
IESNA LM-16
IESNA LM-58-94
IESNA LM-79-08 section 12
Maximum Measured Power
Supply Case or Manufacturer
Designated Temperature
Measurement Point (TMPPS)
Temperature
ANSI/UL 153
UL 1598
Temperature Measurement
Point (TMPLED)
UL1598-2008
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
29 of 39
:
PRODUCTS TESTED
73.
Requirements for Integral
LED Lamps Eligibility
Criteria –
Version 1.1
Version 1.2
Version 1.3
(Omnidirectional /
Directional & Decorative)
Version 1.4
:
TESTS/PROPERTIES
STANDARD METHODS
Electromagnetic and Radio
Frequency Interference
FCC 47 CFR Part 15/18
Transient Protection
IEEE C62.41-1991
Output Operating Frequency,
Noise
Per ENERGY STAR Solid State Lighting
Luminaires Version 1.1
Correlated Colour
ANSI C78-377-2008
Temperature (CCT) and DUV, CIE 13.3-1995
Colour Rendering Index
IESNA LM-79-08 sections 9 and 12
(CRI), Colour Maintenance,
Power Factor, Minimum
Luminous Efficacy, Minimum
Light Output, Colour Spatial
Uniformity (for directional
lamps), Minimum Light Output
(for BR, ER, K and R lamps)
Luminous Intensity
Distribution, Minimum Centre
Intensity (for PAR and MR16
lamps)
IESNA LM-79-08 section 10
Lumen Maintenance
Elevated Temperature Test per ENERGY
STAR CFL Version 4.0
IESNA LM-79-08 section 9
IESNA LM-80-08
Rapid Cycle Stress Test
IESNA LM-65-01
Power Factor
ANSI C82.77-2002
LM-79-08
Electromagnetic and Radio
Frequency Interference
FCC 47 CFR Part 15
Transient Protection
C62.41-1991
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
30 of 39
:
PRODUCTS TESTED
74.
Energy Star Program
Requirements for CFLs
Eligibility Criteria –
Version 4.0, 4.1, 4.2
(Bare, covered and globe
CFLs only)
:
TESTS/PROPERTIES
STANDARD METHODS
In Situ Temperature
Measurement Test (ISTMT)
Per ENERGY STAR Integral LED Lamps
Version 1.2
UL1993-2009
Minimum Operating
Temperature, LED Operating
Frequency, Audible noise
Per ENERGY STAR Integral LED Lamps
Version 1.2
a) Lamp Power (Watts) &
Configuration
IESNA LM-9-1999
b) Correlated Colour
Temperature
IESNA LM-66-00 (for single-ended CFLs)
c) Colour Rendering Index
(CRI)
CIE 13.3-1995
d) Power Factor
IESNA LM-9-1999
IESNA LM-66-00 (for single-ended CFLs)
e) Rapid Cycle Stress Test
ANSI C78.5-2003
IESNA LM-65-01 (for single-ended CFLs)
f) Lumen Maintenance
ANSI C78.5-2003
IESNA LM-40-01
IESNA LM-65-01
IESNA LM-66-00
g) Lamp Life
ANSI C78.5-2003
IESNA LM-40-01
IESNA LM-65-01
h) Run-up Time, Starting
Time
ANSI C78.5-2003
i) Electromagnetic
Interference
FCC 47 CFR Part 2 and Part 18
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
31 of 39
:
PRODUCTS TESTED
75. Energy Star Program
Requirements for
Decorative Light
Strings Eligibility
Criteria – Version
1.4: March 2008
:
TESTS/PROPERTIES
STANDARD METHODS
j) Transient Protection
IEEE C62.41-1991
k) Operating Frequency
Per ENERGY STAR CFLs Version 4
Inspection
Per ENERGY STAR Decorative Light
Strings Version 1.4, and
a. Number of Lamps per String.
b. Replaceable Lamps.
c. Rated for indoor or
indoor/outdoor applications.
d. Warranty
Electrical Requirements
e. Input Power
f. Over-Voltage
ASTM G154-05
CIE 84-1989
CIE 127-1997
IESNA TM-16-05
Lifetime Requirements
g. Maintained Light Output
h. Failed Lamps
Weathering Requirements
i. Maintained Light Output
j. Failed Lamps
Product Packaging for Consumer
Awareness Requirements
k. Product Suitability
l. Product Description
m. Correlated Colour Temperature
for White-light Strings
76. Energy Star Program
Requirements for
Luminaires (Light
Fixtures) (Solid State
Lighting) Eligibility
Criteria – Version 1.1
Efficacy, output, zonal lumen
distribution, colour angular
uniformity, luminaire photometry.
IESNA LM-79-08 section 10
Colour angular uniformity
IESNA LM-58-94
IESNA LM-58-11
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
32 of 39
:
PRODUCTS TESTED
77. Photo-biological Safety
of Lamps and Lamp
Systems
:
TESTS/PROPERTIES
STANDARD METHODS
Power Factor
ANSI C82.77-2002
Colour Rendering Index (CRI)
CIE 13.3-1995
Correlated Colour Temperature
(CCT)
CIE 15-2004
Efficacy, output, Lumen
Maintenance, CCT, CRI, Colour
maintenance
IESNA LM-79-08
Light Source Life, Lumen
Maintenance, Colour
maintenance
IESNA LM-80-08
Full test
IEC 62471: 2006
IEC/TR 62471-2: 2009
IEC/TR 62778:2012, 2014
EN 62471: 2008
AS/NZS 62471:2011
AS/NZS 62471.2:2012
78. Self-ballasted LEDFull test
lamps for general lighting
services
IEC 62560:2011 + A1:2015
IEC 62612:2013 + A1: 2015
IEC/PAS 62612:2009
EN 62560:2012 + A1:2015
EN 62612:2013
AS/NZS IEC 62560:2014, 2017
CNS 15436:2012
CNS 15630:2012
MS IEC 62560:2012
MS 62612:2012 (P)
PNS IEC 62560:2012
PNS IEC 62612:2014
SS 609 : Part 1 : 2015
SS 609 : Part 2 : 2015
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
33 of 39
:
PRODUCTS TESTED
:
TESTS/PROPERTIES
STANDARD METHODS
79. LED modules for general Full test
lighting – Performance
requirements
IEC/PAS 62717: 2011
IEC 62717: 2014 + A1:2015
ISS IEC 62717:2015
MS IEC 62717:2012
TR 27: 2011
80. Projecting long term
lumen maintenance of
LED light source
IES TM-21-11
Full Test
81. Phosphorescent
Full Test
pigments and Products –
Measurement and
Marking at the Producer
ASTM E2072 - 04
ASTM E2072 - 14
ASTM E2073 – 10
DIN 67510-1: 2009
ISO 16069:2004
82. Luminaire performance – Full Test
Particular requirements
for LED Luminaires
IEC 62722-2-1: 2014
IEC/PAS 62722-2-1: 2011
EN 62722-2-1:2016
MS 62722-2-1: 2012
SS IEC 62722-2-1:2015
TR 28-2-1: 2011
83. Maritime navigation and
radio-communication
equipment systems
a) IP Test
b) Clauses 8.8 and 12.1
(low voltage equipment only)
IEC 60945: 2002
EN 60945: 2002
84. Central Power Supply
Full Test
EN 50171:2001
BS EN 50171: 2001
85. Safety Requirement for
Full Test
Secondary Batteries and
Battery Installations.
Part 2: Stationary
Batteries
EN 50272-2:2001
BS EN 50272-2: 2001
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
34 of 39
:
PRODUCTS TESTED
:
TESTS/PROPERTIES
STANDARD METHODS
86.
Signage
Full Test
ISO 3864-4:2011
SS 508 Part 4:2013
87.
Double-capped LED
lamps designed to
retrofit linear
fluorescent lamps
Full Test
IEC 62776: 2014
EN 62776: 2015
SS IEC 62776:2015
88.
Test Method for LED
lamps, LED luminaires
and LED Modules
Full Test
EN 13032-4: 2015
CIE S 025/E: 2015
89.
Safety tests for
isolating transformers
for the supply of
medical locations
Full Test
IEC 61558-2-15: 2011
EN 61558-2-15: 2012
AS/NZS 61558.2.15: 2012
90.
Light Emitting Diode
(LED) Equipment for
use in Lighting
Applications
Full Test
CAN/CSA-C22.2 No. 250.13
UL 8750:2015
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
35 of 39
:
PRODUCTS TESTED
:
TESTS/PROPERTIES
STANDARD METHODS
B.
Components
1.
Fixed Resistors for use
a) Fixed low-power non-wirewound
resistors
All clauses
IEC 60115-2: Part 2: 1982
b) Fixed power resistors
All clauses
IEC 60115-4: Part 4: 1982 + A1:1993
c) Fixed precision resistors
All clauses
IEC 60115-5: Part 5: 1982
d) Fixed resistor networks with
individually measurable resistor
All clauses
IEC 60115-6: Part 6: 1983 + A1:1987
e) Fixed resistor networks in which
not all resistors are individually
measureable
All clauses
IEC 60115-7: Part 7: 1984
f) Fixed chip resistors
All clauses
IEC 60115-8: Part 8: 1989
Fixed Capacitors for use in
Electronic Equipment
a) Generic Specification
All clauses except 4.28
IEC 60384-1: Part 1: 1999
b) Fixed metallized polyethyleneterephthalate film dielectric D.C.
capacitors
All clauses except 4.28
IEC 60384-2: Part 2: 1982 + A1:1987
+ A2:1992
c) Fixed tantalum chip capacitors
All clauses
IEC 60384-3: Part 3: 1989
d) Aluminium electrolytic
capacitors with solid or non-solid
electrolyte
All clauses
IEC 60384-4: Part 4: 1998 A1:1992
e) Fixed metallized polycarbonate
film dielectric D.C. capacitors
All clauses
IEC 60384-6: Part 6: 1987 + A2:1992
f) Fixed capacitors of ceramic
dielectric, Class 1
All clauses
IEC 60384-8: Part 8: 1988 A1:1993
2.
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
36 of 39
:
PRODUCTS TESTED
3.
4.
:
TESTS/PROPERTIES
STANDARD METHODS
g) Fixed capacitors of ceramic
dielectric, Class 2
All clauses
IEC 60384-9: Part 9: 1988
h) Fixed multilayer ceramic chip
capacitors
All clauses
IEC 60384-10: Part 10: 1989:
A1:1993
i) Fixed polyethylene
Terephthalate film dielectric D.C
capacitors
All clauses
IEC 60384-11: Part 11: 1988
j) Fixed polycarbonate film
dielectric metal foil D.C
capacitors
All clauses
IEC 60384-12: Part 12: 1988
k) Fixed polypropylene film
dielectric metal foil D.C.
capacitors
All clauses
IEC 60384-13: Part 13: 1991
l) Fixed tantalum capacitors with
non-solid or solid electrolyte
All clauses
IEC 60384-15: Part 15: 1982 +
A1:1987 + A2:1992
m) Fixed metallized polypropylene
film dielectric D.C. capacitors
All clauses
IEC 60384-16: Part 16: 1982 +
A1:1987 + A2:1992
n) Fixed metallized polypropylene
film dielectric A.C and pulse
capacitors
All clauses
IEC 60384-17: Part 17: 1987
Qualification Approval
All clauses
IEC 61261: Part 1: 1994
Qualification Approval
All clauses
IEC 61253: Part 1: 1993
Piezoelectric Ceramic Filter
a) Generic specification in the IEC
quality assessment system for
electronic components
Piezoelectric Ceramic
Resonators
a) Generic specification in the IEC
quality assessment system for
electronic components
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
37 of 39
:
PRODUCTS TESTED
5.
Semiconductor Devices Discrete
Devices and Integrated Circuits
a) Sectional specification for
discrete devices
:
TESTS/PROPERTIES
STANDARD METHODS
All clauses
IEC 60747-11:1985 + A1:1991 +
A2:1996
b) Rectifier diodes
All clauses
IEC 60747-2:1983 + A1:1992 +
A2:1993
c) Signal (including switching)
and regulator diodes
All clauses
IEC 60747-3:1985 + A1:1991 +
A2:1993
d) Thyristors
All clauses
IEC 60747-6:1983 + A1:1991 +
A2:1994
e) Bipolar transistors
All clauses
IEC 60747-7: 1988 + A1:1991 +
A2:1994
f) Field-effect transistors
All clauses
IEC 60747-8: 1984 + A1:1991
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
38 of 39
:
PRODUCTS TESTED
C.
:
TESTS/PROPERTIES
STANDARD METHODS
Photovoltaic Balance of System
– PV Inverter
1.
Safety of power converters for
use in photovoltaic power
systems – Part 1: General
requirements.
Full test
IEC 62109-1: 2010;
EN 62109-1: 2010;
BS EN 62109-1: 2010
2.
Safety of power converters for
use in photovoltaic power
systems – Part 2: Particular
requirements for inverters.
Full test
IEC 62109-2: 2011;
EN 62109-2: 2011;
BS EN 62109-2: 2011
3.
Overall efficiency of grid
connected photovoltaic inverters.
Full test
EN 50530: 2010 + A1: 2013
BS EN 50530: 2010
4.
Photovoltaic (PV) systems –
Characteristics of the utility
interface.
Full test
IEC 61727: 2004;
5.
Test Procedure of islanding
prevention measures for utilityinterconnected photovoltaic
inverters.
Full Test
IEC 62116: 2008;
EN 62116: 2011;
BS EN 62116: 2011
6. 0 Photovoltaic systems – Power
conditioners – Procedure for
measuring efficiency.
Full Test
IEC 61683: 1999;
EN 61683: 2000;
BS EN 61683: 2000
7.
Full Test
EN 50438: 2007;
BS EN 50438: 2007
Requirements for the connection
of micro- generators in parallel
with public low-voltage distribution
networks.
Certificate No. :
LA-2007-0385-E
(Part 3 of 5)
Issue No. :
16
Date
2 February 2018
Page
39 of 39
:
Approved Signatories
Tan Lee Heng
Tan Heng Khoon
Derrick Sim
Ong Ching Yen (Ms)
-
Adrian Kwok
-
Yeo Eng Teong
Chua Su Chen (Ms)
Ng Chin Heng
Ng Chee Huat
-
:
All tests in Section B.
All tests in Section A except A90.
All tests in Section A except A90 and all tests in Section C.
For A1, A2, A4, A9-13, A17, A19, A23, A30, A33-34, A36, A39-42, A55-56
and A58-59.
For A1, A4, A9-13, A17, A19, A30, A33-34, A36, A37, A39-42, A55, A58-59,
A62, A84 and A85.
For A61 and A90.
For A90.
For A90.
For A90.
Note:
This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025. A
laboratory's fulfilment of the requirements of ISO/IEC 17025 means the laboratory meets both the technical
competence requirements and management system requirements that are necessary for it to consistently
deliver technically valid test results. The management system requirements in ISO/IEC 17025 are written in
language relevant to laboratory operations and operate generally in accordance with the principles of ISO
9001.