1.Alarm in TRX:
RXASP:MO=RXOTG-126;
3.Alarm in TG:
RXASP:MO=RXOTG-75;
2.CHECK SITE STATUS:
RXCDP:MO=RXOTG-12;
3.Find the TRX in which sector:
RXMOP:MO=RXOTRX-12-1;
4.External alarm in BTS:
ALLIP:ALCAT=BTS;
5.Fault code in CF:
RXMFP:MO=RXOTG-12;
6.Fault code in TRX:
RXMFP:MO=RXOTRX-12-3;
7.How to find sector:
RXTCP:MO=RXOTG-75;
8.How to find TG value:
RXTCP:MOTY=RXOTG,CELL=ZRY117A;
9.Check traffic:
RLCRP:CELL=ZRY935A;
10.Checl all the site status in BSC:
RLCRP:CELL=ALL;
11.! TO HALT AND UNHALT SITES !
RLSTC:CELL=JRY141C,STATE=HALTED;
RLSTC:CELL=UCW639C,STATE=ACTIVE;
RLSTP:CELL=UJD977A;
RLSTP:CELL=ALL,STATE=HALTED;
12.Check configuration(TRX)
RXOMOP:MO=RXOTRX-12-0;
From DIP to TG value:
DTDIP:DIP=RBLT5;(Find SNT VALUE)
NTCOP:SNT=ETRBLT-55;(ETRBLT-55 This is SNT value from last command)
STDEP:DEV=RBLT-1943&&-1955;(vALUE RBLT-1943&&-1955 find from last command)
RXMDP:MOTY=RXOTG,DEV=RBLT-1953;(Which one is busy in last command)
RXTCP:MO=RXOTG-440;
13.Check CELL ID,BCCH:
RLDEP:CELL=ZRY775A;
14.Cell logical remove and appear:
RLSLE:CELL=ZRY775A;
RLSLI:CELL=ZRY775A;
15.Check communication with BTS:
RXTEI:MO=RXOCF-65;
16.CELL LOGICAL active or Not:
RLSLP:CELLZRY226A;(For check status)
RLSLP:CELLZRY226A;(To active)
16.Check TEI value:
RXMOP:MO=RXOCF-76;
17.All Internal alarm in BSC:
RXASP:MOTY=RXOTG;
18.Remove label:
RXMOP:MO=RXOTG-76;(Check now which label)
RXMSC:MO=RXOTG-56,RSITE=ZRY554;
RXMOP:MO=RXOTG-76;(Check now which label)
19.Check neibour cell:
RLNRP:CELL=ZRY228A,CELLR=ALL;
20.How to find Site restore time:
RXELP:MO=RXOTG-5;
21.Alarm SUPERVISION A1,A2,A3:
RLSLP:CELL=ZRY228A;
21.Rest TG:
RXBLI:MO=RXOTG-24,SUBORD,FORCE;
RXESE:MO=RXOTG-24,SUBORD;
RXESI:MO=RXOTG-24,SUBORD;
RXBLE:MO=RXOTG-24,SUBORD;
22.Reset TRX:
RXBLI:MO=RXOTRX-241-5,SUBORD,FORCE;
RXESE:MO=RXOTRX-241-5,SUBORD;
RXESI:MO=RXOTRX-241-5,SUBORD;
RXBLE:MO=RXOTRX-241-5,SUBORD;
23.Reset Time slot:
RXBLI:MO=RXOTS-1-2-3,FORCE;
RXESE:MO=RXOTS-1-2-3;
RXESI:MO=RXOTS-1-2-3;
RXBLE:MO=RXOTS-1-2-3;
24.Checl E1 status:
DTSTP:DIP=80RBL2;
25.Check error in E1:
DTQUP:DIP=RBLT71;
DTQDP:DIP=226rb2;
26.Reset Error counter:
DTQSR:DIP=RBLT55,UNACC,DEGR;
27.E1 Block and Deblock:
DTBLE:DIP=9RB2;
DTBLI:DIP=9RB2;
28.SWITCHING NETWORK TERMINAL FAULT:
ALLIP:ALCAT=SWITCH;
NTSTP:SNT=().....(Check alarm in SNT)
29.Block and Deblock SNT:
NTBLI:SNT=ETRBLT-25;
NTBLE:SNT=ETRBLT-25;
30.GBLINK:
RRGBP;
RADEP:DEV=RBLT2-310;
NTCOP:SNT=ETM2-3;
DTSTP:DIP=IRTG;
31.CP FAULT:
ALLIP:ALCAT PROC;
DPWSP;
32.Heart beat failure:
eac_esi_config -ne GR10B1;
33.RP FAULT:
EXRPP:RP=997 (To check RP status)..GDSTP;(To check master and slave)
REPRI:RP=997;
REMRI:RP=997,PCB="CGB-2 CLM890";
RECRI:RP-997;
BLRPI:RP=142,FORCED; If RP is working---reset
BLRPE:RP=142;
34.Check the Node is UP or DOWN.
IOEXP;
ALLIP;
APLOC;
hwver
ver
Prcstate & hostname
Cluster node
Cluster res
Cluster group
Cluster netint
cluster /list
Cluster res | findstr -ive online
35.Back up information fault:
SYBUE;
SYBUP:FILE;
;
SYTUC;
SYBUI:DISC;
!TO BACKUP FILE SYSTEM!
36.LBS DOWN:
EXSCP:NAME=ALL;
EXSCP:NAME=LBS_ZRY225;
RADEP:DEV=RBLT2-3101;
NTCOP:SNT=ETM2-2;
DTSTP:DIP=80RBL2;
37.How many E1 at the site:
RXAPP:MO=RXOTG-89;
38.RADIO TRANSMISSION IP GB INTERFACE FAULT!
RRBVP:NSEI=ALL;
39.C7 LINK DOWN.
C7LTP:LS=ALL;
C7LDP:LS=3-3119;
EXSCP:DEV=C7STAH-97;
RADEP:DEV=RALT2-10222;
NTCOP:SNT=ETM2-7;
DTSTP:DIP=21RAL2;
40.DISTIBUTION GROUPSWITCH FAULT:
GDSTP;
GDBLI:UNIT=XM-A-0-0;
GDBLE:UNIT=XM-A-0-0;
41.Transmission Error:and Manual system restored:
SYRIP:SURVEY;
42.Network synchronization fault:
NSSTP;
43.Blocking supervision of Device:
DTSTP:DIP=RALT77;
STBSP:DETY=RTTAH1D;
STBSP:DETY=RALT;
44.Loss of visiblity:
NE=GR10B1,NODE=B;
45.GB LINK Device Block and Deblock:
RRGBP:NCBD; (Check status)
RRVBI:NSVCI=11611; (To block)
RRVBe:NSVCI=11611; (To Deblock)
46.Check Traffic in BSC:
RRTPP:TRAPOOL=ALL;
47.SWITCHING NETWORK PRODUCTION:
PWNSP:SDIP=ALL;
48.AP process Reinitiated:
APLOC;
ALIST
ACEASE 6101:0
49.Radip tansmission transcoder pool:
RRMAP:TRAPOOL=ALL;
BLODI:DEV=RTTGD-6007;
BLODE:DEV=RTTGD-6007;
50.Check AP alarms
ALLIP:ALCAT=IO_DEV;
51.GROUP SWITCH FAULT:
GSSTP;
GSBLI:TSM=TSM-01; or CLM
GSBLE:TSM=TSM-01;
52.GB OVER IP
RRINP:NSEI=ALL;
RRBVP:NSEI=ALL;
53.Delete LBS after rehome site.
exsce:name=LBS_ZNJ754,dev=RBLT2-2687;
54.BLOCKING SUPERVISION OF DEVICE.
STBSP:DEV=RTGPHDV; (Status).
BLODI:DEV=RTGPHDV-1040&&-1048;
BLODE:DEV=RTGPHDV-1040&&-1048;
55.TO CONNECT VIA X29.
GR11B3_X29
56.IF ALL TRU IN LOCAL MODE;
RXPLI:MO=RXOCF-119,UC;
57.Check Node in IOG.
IMMCT:SPG=0;
IMCSP;
RXCDP:MO=RXOTG-245;
To check the dip belongs to Site and find the TG value from dip
dtdip:dip=rblt120;- To find the SNT value
ntcop:snt=etrblt-120; - To find the DEV
stdep:dev=rblt-3841&&-3871; - To find the Traffic status if it is busy it is bel
ongs to site If it is SEBU MBL it is belongs to LBS
rxmdp:moty=rxots,dev=rblt-3865;- Pick any one busy dev To find the TG value
rxtcp:mo=rxotg-84; - To find the site from TG value
13.Check CELL ID,BCCH:
RLDEP:CELL=ZRY775A;
RLCFP:CELL=ZRY;
RLMFP:CELL=ZRY;
RXAPP:MO=RXOTG-47;
RXAPE:MO=RXOTG-47,DCP=59;
RXAPI:MO=RXOTG-47,DCP=59,DEV=RBLT87;
RRPTP:PSTU=ALL;